* [PATCH 0/2] Add driver for Domintech DMARD06 accelerometer @ 2016-07-18 12:48 Aleksei Mamlin 2016-07-18 12:48 ` [PATCH 1/2] devicetree: bindings: Add vendor prefix for Domintech Co., Ltd Aleksei Mamlin ` (2 more replies) 0 siblings, 3 replies; 23+ messages in thread From: Aleksei Mamlin @ 2016-07-18 12:48 UTC (permalink / raw) To: Dmitry Torokhov; +Cc: linux-input, devicetree, linux-kernel, Aleksei Mamlin This patch series adds driver for Domintech DMARD06 Low-G Tri-Axial digital accelerometer and vendor prefix for Domintech Co., Ltd. Aleksei Mamlin (2): devicetree: bindings: Add vendor prefix for Domintech Co., Ltd. input: misc: Add support for Domintech DMARD06 accelerometer .../devicetree/bindings/input/dmard06.txt | 24 ++ .../devicetree/bindings/vendor-prefixes.txt | 1 + drivers/input/misc/Kconfig | 12 + drivers/input/misc/Makefile | 1 + drivers/input/misc/dmard06.c | 442 +++++++++++++++++++++ 5 files changed, 480 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/dmard06.txt create mode 100644 drivers/input/misc/dmard06.c -- 2.7.3 ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 1/2] devicetree: bindings: Add vendor prefix for Domintech Co., Ltd. 2016-07-18 12:48 [PATCH 0/2] Add driver for Domintech DMARD06 accelerometer Aleksei Mamlin @ 2016-07-18 12:48 ` Aleksei Mamlin 2016-07-20 1:09 ` Rob Herring 2016-07-18 12:48 ` Aleksei Mamlin 2016-07-21 20:32 ` Aleksei Mamlin 2 siblings, 1 reply; 23+ messages in thread From: Aleksei Mamlin @ 2016-07-18 12:48 UTC (permalink / raw) To: Dmitry Torokhov; +Cc: linux-input, devicetree, linux-kernel, Aleksei Mamlin Add vendor-prefix for Domintech Co., Ltd. Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index d2bce22..0c12f2d 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -75,6 +75,7 @@ digilent Diglent, Inc. dlg Dialog Semiconductor dlink D-Link Corporation dmo Data Modul AG +domintech Domintech Co., Ltd. dptechnics DPTechnics dragino Dragino Technology Co., Limited ea Embedded Artists AB -- 2.7.3 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* Re: [PATCH 1/2] devicetree: bindings: Add vendor prefix for Domintech Co., Ltd. 2016-07-18 12:48 ` [PATCH 1/2] devicetree: bindings: Add vendor prefix for Domintech Co., Ltd Aleksei Mamlin @ 2016-07-20 1:09 ` Rob Herring 0 siblings, 0 replies; 23+ messages in thread From: Rob Herring @ 2016-07-20 1:09 UTC (permalink / raw) To: Aleksei Mamlin; +Cc: Dmitry Torokhov, linux-input, devicetree, linux-kernel On Mon, Jul 18, 2016 at 03:48:11PM +0300, Aleksei Mamlin wrote: > Add vendor-prefix for Domintech Co., Ltd. > > Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> > --- > Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + > 1 file changed, 1 insertion(+) Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 2/2] input: misc: Add support for Domintech DMARD06 accelerometer @ 2016-07-18 12:48 ` Aleksei Mamlin 0 siblings, 0 replies; 23+ messages in thread From: Aleksei Mamlin @ 2016-07-18 12:48 UTC (permalink / raw) To: Dmitry Torokhov; +Cc: linux-input, devicetree, linux-kernel, Aleksei Mamlin This patch add support for Domintech DMARD06 accelerometer. Domintech DMARD06 is a low-g tri-axial digital accelerometer with special power saving modes suitable for consumer mobile application. Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> --- .../devicetree/bindings/input/dmard06.txt | 24 ++ drivers/input/misc/Kconfig | 12 + drivers/input/misc/Makefile | 1 + drivers/input/misc/dmard06.c | 442 +++++++++++++++++++++ 4 files changed, 479 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/dmard06.txt create mode 100644 drivers/input/misc/dmard06.c diff --git a/Documentation/devicetree/bindings/input/dmard06.txt b/Documentation/devicetree/bindings/input/dmard06.txt new file mode 100644 index 0000000..528c318 --- /dev/null +++ b/Documentation/devicetree/bindings/input/dmard06.txt @@ -0,0 +1,24 @@ +Device tree bindings for Domintech DMARD06 acceletometer + +Required properties: + - compatible : Should be "domintech,dmard06" + - reg : I2C address of the chip. Should be 0x1c + +Optional properties: + - interrupt-parent : Interrupt controller to which the chip is connected + - interrupts : Interrupt to which the chip is connected + + +Example: + &i2c1 { + /* ... */ + + accelerometer@1c { + compatible = "domintech,dmard06"; + reg = <0x1c>; + interrupt-parent = <&gpio>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; + + /* ... */ + }; diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index efb0ca8..b95e0e7 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -107,6 +107,18 @@ config INPUT_BMA150 To compile this driver as a module, choose M here: the module will be called bma150. +config INPUT_DMARD06 + tristate "Domintech DMARD06 Digital Accelerometer support" + depends on OF || COMPILE_TEST + depends on I2C + select INPUT_POLLDEV + help + Say Y to enable support for the Domintech DMARD06 Low-G Tri-Axial + digital accelerometer connected via an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called dmard06. + config INPUT_E3X0_BUTTON tristate "NI Ettus Research USRP E3xx Button support." default n diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 6a1e5e2..d83866f 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o obj-$(CONFIG_INPUT_DA9055_ONKEY) += da9055_onkey.o obj-$(CONFIG_INPUT_DA9063_ONKEY) += da9063_onkey.o obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o +obj-$(CONFIG_INPUT_DMARD06) += dmard06.o obj-$(CONFIG_INPUT_E3X0_BUTTON) += e3x0-button.o obj-$(CONFIG_INPUT_DRV260X_HAPTICS) += drv260x.o obj-$(CONFIG_INPUT_DRV2665_HAPTICS) += drv2665.o diff --git a/drivers/input/misc/dmard06.c b/drivers/input/misc/dmard06.c new file mode 100644 index 0000000..cc1e5a2 --- /dev/null +++ b/drivers/input/misc/dmard06.c @@ -0,0 +1,442 @@ +/* + * Driver for Domintech DMARD06 accelerometer + * + * Copyright (C) 2016 Aleksei Mamlin <mamlinav@gmail.com> + * Copyright (c) 2012 Domintech Technology Co., Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/input-polldev.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/of.h> + +/* Device data registers */ +#define DMARD06_CHIP_ID_REG 0x0f +#define DMARD06_TOUT_REG 0x40 +#define DMARD06_XOUT_REG 0x41 +#define DMARD06_YOUT_REG 0x42 +#define DMARD06_ZOUT_REG 0x43 + +/* Device control registers */ +#define DMARD06_CTRL_1_REG 0x44 +#define DMARD06_CTRL_2_REG 0x45 +#define DMARD06_CTRL_3_REG 0x46 +#define DMARD06_CTRL_4_REG 0x47 +#define DMARD06_CTRL_5_REG 0x48 +#define DMARD06_STATUS_REG 0x49 +#define DMARD06_INT_CFG_REG 0x4a +#define DMARD06_FILTER_RESET_REG 0x52 +#define DMARD06_CHIP_RESET_REG 0x53 + +/* Device ID value */ +#define DMARD06_CHIP_ID 0x06 + +/* Device max value */ +#define DMARD06_MAX_VALUE 0x3f + +/* Each axis is represented by a 1-byte data word */ +#define DMARD06_XYZ_DATA_SIZE 3 + +/* Interrupt sources */ +#define DMARD06_INT_SRC1 0x04 +#define DMARD06_INT_SRC_BOTH 0x08 +#define DMARD06_INT_MOV_DETECT 0x40 +#define DMARD06_INT_POS_DETECT 0xc0 + +/* Device modes */ +#define DMARD06_MODE_NORMAL 0x27 +#define DMARD06_MODE_POWERDOWN 0x00 + +/* Input poll interval in milliseconds */ +#define DMARD06_POLL_INTERVAL 10 +#define DMARD06_POLL_MAX 100 +#define DMARD06_POLL_MIN 0 + +struct dmard06_data { + struct i2c_client *client; + struct input_dev *input; + struct input_polled_dev *input_poll; + unsigned long irq_flags; + int range; + u8 chip_id; + u8 mode; +}; + +static int dmard06_i2c_read(struct i2c_client *client, u8 reg, u8 *buf) +{ + int error; + + error = i2c_master_send(client, ®, 1); + if (unlikely(error < 0)) + return error; + + error = i2c_master_recv(client, buf, 1); + if (unlikely(error < 0)) + return error; + + return 0; +} + +static int dmard06_i2c_write(struct i2c_client *client, u8 reg, u8 val) +{ + int error; + u8 buf[2] = {reg, val}; + + error = i2c_master_send(client, buf, 2); + if (unlikely(error < 0)) + return error; + + return 0; +} + +static int dmard06_reset(struct i2c_client *client) +{ + u8 buf; + int error; + + error = dmard06_i2c_read(client, DMARD06_CHIP_RESET_REG, &buf); + if (error) { + dev_err(&client->dev, "Failed to reset controller: %d", error); + return error; + } + + return 0; +} + +static int dmard06_set_mode(struct dmard06_data *dmard06, u8 mode) +{ + int error; + + error = dmard06_i2c_write(dmard06->client, DMARD06_CTRL_1_REG, mode); + if (error) { + dev_err(&dmard06->client->dev, "Failed to set mode: %d", + error); + return error; + } + + dmard06->mode = mode; + + return 0; +} + +static int dmard06_init_irq(struct i2c_client *client) +{ + int error; + + error = dmard06_i2c_write(client, DMARD06_CTRL_4_REG, + DMARD06_INT_SRC1); + if (error) { + dev_err(&client->dev, "Failed to set interrupt source: %d", + error); + return error; + } + + error = dmard06_i2c_write(client, DMARD06_INT_CFG_REG, + DMARD06_INT_POS_DETECT); + if (error) { + dev_err(&client->dev, "Failed to set interrupt event: %d", + error); + return error; + } + + return 0; +} + +static int dmard06_open(struct dmard06_data *dmard06) +{ + int error; + + if (dmard06->mode != DMARD06_MODE_NORMAL) { + error = dmard06_set_mode(dmard06, DMARD06_MODE_NORMAL); + if (error) + return error; + } + + return 0; +} + +static void dmard06_close(struct dmard06_data *dmard06) +{ + if (dmard06->mode != DMARD06_MODE_POWERDOWN) + dmard06_set_mode(dmard06, DMARD06_MODE_POWERDOWN); +} + +static int dmard06_irq_open(struct input_dev *input) +{ + struct dmard06_data *dmard06 = input_get_drvdata(input); + + return dmard06_open(dmard06); +} + +static void dmard06_irq_close(struct input_dev *input) +{ + struct dmard06_data *dmard06 = input_get_drvdata(input); + + dmard06_close(dmard06); +} + +static void dmard06_poll_open(struct input_polled_dev *input_poll) +{ + struct dmard06_data *dmard06 = input_poll->private; + + dmard06_open(dmard06); +} + +static void dmard06_poll_close(struct input_polled_dev *input_poll) +{ + struct dmard06_data *dmard06 = input_poll->private; + + dmard06_close(dmard06); +} + +static int dmard06_read_chip_id(struct dmard06_data *dmard06) +{ + u8 buf; + u8 chip_id; + int error; + + error = dmard06_i2c_read(dmard06->client, DMARD06_CHIP_ID_REG, &buf); + if (error) { + dev_err(&dmard06->client->dev, "Failed to read chip id: %d\n", + error); + return error; + } + + chip_id = (buf & 0x00ff); + if (chip_id != DMARD06_CHIP_ID) { + dev_err(&dmard06->client->dev, "Unknown chip id: %02x\n", + chip_id); + return -EINVAL; + } + + dmard06->chip_id = chip_id; + dev_info(&dmard06->client->dev, "Found DMARD%02x chip\n", chip_id); + + return 0; +} + +static void dmard06_report_xyz(struct dmard06_data *dmard06) +{ + u8 axis[DMARD06_XYZ_DATA_SIZE]; + bool reversed; + int xyz[3]; + int error; + int i; + + error = i2c_smbus_read_i2c_block_data(dmard06->client, + DMARD06_XOUT_REG, + DMARD06_XYZ_DATA_SIZE, axis); + if (error != DMARD06_XYZ_DATA_SIZE) + return; + + for (i = 0; i < DMARD06_XYZ_DATA_SIZE; i++) { + reversed = (axis[i] >> 7) & 1; + xyz[i] = (int)((axis[i] & 0x7f) >> 1); + if (reversed) + xyz[i] = xyz[i] - dmard06->range; + } + + input_report_abs(dmard06->input, ABS_X, xyz[0]); + input_report_abs(dmard06->input, ABS_Y, xyz[1]); + input_report_abs(dmard06->input, ABS_Z, xyz[2]); + input_sync(dmard06->input); +} + +static irqreturn_t dmard06_irq_handler(int irq, void *dev_id) +{ + struct dmard06_data *dmard06 = dev_id; + + dmard06_report_xyz(dmard06); + + return IRQ_HANDLED; +} + +static void dmard06_poll(struct input_polled_dev *input_poll) +{ + dmard06_report_xyz(input_poll->private); +} + +static void dmard06_init_input_device(struct dmard06_data *dmard06, + struct input_dev *input) +{ + int range; + + input->name = "dmard06"; + input->id.bustype = BUS_I2C; + input->id.version = dmard06->chip_id; + input->dev.parent = &dmard06->client->dev; + + set_bit(EV_ABS, input->evbit); + + range = DMARD06_MAX_VALUE; + input_set_abs_params(input, ABS_X, -range, range, 0, 0); + input_set_abs_params(input, ABS_Y, -range, range, 0, 0); + input_set_abs_params(input, ABS_Z, -range, range, 0, 0); + + dmard06->range = range; +} + +static int dmard06_request_input_device(struct dmard06_data *dmard06) +{ + struct input_dev *input; + int error; + + input = devm_input_allocate_device(&dmard06->client->dev); + if (!input) { + dev_err(&dmard06->client->dev, + "Failed to allocate input device\n"); + return -ENOMEM; + } + + dmard06_init_input_device(dmard06, input); + + input->open = dmard06_irq_open; + input->close = dmard06_irq_close; + input_set_drvdata(input, dmard06); + + error = input_register_device(input); + if (error) { + dev_err(&dmard06->client->dev, + "Failed to register input device: %d", error); + return error; + } + + dmard06->input = input; + + return 0; +} + +static int dmard06_request_polled_device(struct dmard06_data *dmard06) +{ + struct input_polled_dev *input_poll; + int error; + + input_poll = devm_input_allocate_polled_device(&dmard06->client->dev); + if (!input_poll) { + dev_err(&dmard06->client->dev, + "Failed to allocate polled input device\n"); + return -ENOMEM; + } + + input_poll->private = dmard06; + input_poll->open = dmard06_poll_open; + input_poll->close = dmard06_poll_close; + input_poll->poll = dmard06_poll; + input_poll->poll_interval = DMARD06_POLL_INTERVAL; + input_poll->poll_interval_min = DMARD06_POLL_MIN; + input_poll->poll_interval_max = DMARD06_POLL_MAX; + + dmard06_init_input_device(dmard06, input_poll->input); + + error = input_register_polled_device(input_poll); + if (error) { + dev_err(&dmard06->client->dev, + "Failed to register polled device: %d", error); + return error; + } + + dmard06->input_poll = input_poll; + dmard06->input = input_poll->input; + + return 0; +} + +static int dmard06_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct dmard06_data *dmard06; + int error; + + dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr); + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "I2C check functionality failed\n"); + return -ENXIO; + } + + dmard06 = devm_kzalloc(&client->dev, sizeof(*dmard06), GFP_KERNEL); + if (!dmard06) + return -ENOMEM; + + dmard06->client = client; + i2c_set_clientdata(client, dmard06); + + error = dmard06_reset(dmard06->client); + if (error) + return error; + + error = dmard06_read_chip_id(dmard06); + if (error) + return error; + + error = dmard06_set_mode(dmard06, DMARD06_MODE_NORMAL); + if (error) + return error; + + if (dmard06->client->irq) { + error = dmard06_init_irq(dmard06->client); + if (error) + return error; + + error = dmard06_request_input_device(dmard06); + if (error) + return error; + + dmard06->irq_flags = IRQ_TYPE_LEVEL_LOW | IRQF_ONESHOT; + error = devm_request_threaded_irq(&dmard06->client->dev, + dmard06->client->irq, NULL, + dmard06_irq_handler, + dmard06->irq_flags, + dmard06->client->name, + dmard06); + if (error) { + dev_err(&dmard06->client->dev, + "Request IRQ failed: %d\n", error); + return error; + } + + } else { + error = dmard06_request_polled_device(dmard06); + if (error) + return error; + } + + return 0; +} + +static const struct i2c_device_id dmard06_id[] = { + { "dmard06", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, dmard06_id); + +static const struct of_device_id dmard06_of_match[] = { + { .compatible = "domintech,dmard06" }, + { } +}; +MODULE_DEVICE_TABLE(of, dmard06_of_match); + +static struct i2c_driver dmard06_driver = { + .probe = dmard06_probe, + .class = I2C_CLASS_HWMON, + .id_table = dmard06_id, + .driver = { + .name = "dmard06", + .of_match_table = of_match_ptr(dmard06_of_match), + }, +}; +module_i2c_driver(dmard06_driver); + +MODULE_AUTHOR("Aleksei Mamlin <mamlinav@gmail.com>"); +MODULE_DESCRIPTION("Domintech DMARD06 accelerometer driver"); +MODULE_LICENSE("GPL v2"); -- 2.7.3 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 2/2] input: misc: Add support for Domintech DMARD06 accelerometer @ 2016-07-18 12:48 ` Aleksei Mamlin 0 siblings, 0 replies; 23+ messages in thread From: Aleksei Mamlin @ 2016-07-18 12:48 UTC (permalink / raw) To: Dmitry Torokhov Cc: linux-input-u79uwXL29TY76Z2rM5mHXA, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-kernel-u79uwXL29TY76Z2rM5mHXA, Aleksei Mamlin This patch add support for Domintech DMARD06 accelerometer. Domintech DMARD06 is a low-g tri-axial digital accelerometer with special power saving modes suitable for consumer mobile application. Signed-off-by: Aleksei Mamlin <mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> --- .../devicetree/bindings/input/dmard06.txt | 24 ++ drivers/input/misc/Kconfig | 12 + drivers/input/misc/Makefile | 1 + drivers/input/misc/dmard06.c | 442 +++++++++++++++++++++ 4 files changed, 479 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/dmard06.txt create mode 100644 drivers/input/misc/dmard06.c diff --git a/Documentation/devicetree/bindings/input/dmard06.txt b/Documentation/devicetree/bindings/input/dmard06.txt new file mode 100644 index 0000000..528c318 --- /dev/null +++ b/Documentation/devicetree/bindings/input/dmard06.txt @@ -0,0 +1,24 @@ +Device tree bindings for Domintech DMARD06 acceletometer + +Required properties: + - compatible : Should be "domintech,dmard06" + - reg : I2C address of the chip. Should be 0x1c + +Optional properties: + - interrupt-parent : Interrupt controller to which the chip is connected + - interrupts : Interrupt to which the chip is connected + + +Example: + &i2c1 { + /* ... */ + + accelerometer@1c { + compatible = "domintech,dmard06"; + reg = <0x1c>; + interrupt-parent = <&gpio>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; + + /* ... */ + }; diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index efb0ca8..b95e0e7 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -107,6 +107,18 @@ config INPUT_BMA150 To compile this driver as a module, choose M here: the module will be called bma150. +config INPUT_DMARD06 + tristate "Domintech DMARD06 Digital Accelerometer support" + depends on OF || COMPILE_TEST + depends on I2C + select INPUT_POLLDEV + help + Say Y to enable support for the Domintech DMARD06 Low-G Tri-Axial + digital accelerometer connected via an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called dmard06. + config INPUT_E3X0_BUTTON tristate "NI Ettus Research USRP E3xx Button support." default n diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 6a1e5e2..d83866f 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o obj-$(CONFIG_INPUT_DA9055_ONKEY) += da9055_onkey.o obj-$(CONFIG_INPUT_DA9063_ONKEY) += da9063_onkey.o obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o +obj-$(CONFIG_INPUT_DMARD06) += dmard06.o obj-$(CONFIG_INPUT_E3X0_BUTTON) += e3x0-button.o obj-$(CONFIG_INPUT_DRV260X_HAPTICS) += drv260x.o obj-$(CONFIG_INPUT_DRV2665_HAPTICS) += drv2665.o diff --git a/drivers/input/misc/dmard06.c b/drivers/input/misc/dmard06.c new file mode 100644 index 0000000..cc1e5a2 --- /dev/null +++ b/drivers/input/misc/dmard06.c @@ -0,0 +1,442 @@ +/* + * Driver for Domintech DMARD06 accelerometer + * + * Copyright (C) 2016 Aleksei Mamlin <mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> + * Copyright (c) 2012 Domintech Technology Co., Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/input-polldev.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/of.h> + +/* Device data registers */ +#define DMARD06_CHIP_ID_REG 0x0f +#define DMARD06_TOUT_REG 0x40 +#define DMARD06_XOUT_REG 0x41 +#define DMARD06_YOUT_REG 0x42 +#define DMARD06_ZOUT_REG 0x43 + +/* Device control registers */ +#define DMARD06_CTRL_1_REG 0x44 +#define DMARD06_CTRL_2_REG 0x45 +#define DMARD06_CTRL_3_REG 0x46 +#define DMARD06_CTRL_4_REG 0x47 +#define DMARD06_CTRL_5_REG 0x48 +#define DMARD06_STATUS_REG 0x49 +#define DMARD06_INT_CFG_REG 0x4a +#define DMARD06_FILTER_RESET_REG 0x52 +#define DMARD06_CHIP_RESET_REG 0x53 + +/* Device ID value */ +#define DMARD06_CHIP_ID 0x06 + +/* Device max value */ +#define DMARD06_MAX_VALUE 0x3f + +/* Each axis is represented by a 1-byte data word */ +#define DMARD06_XYZ_DATA_SIZE 3 + +/* Interrupt sources */ +#define DMARD06_INT_SRC1 0x04 +#define DMARD06_INT_SRC_BOTH 0x08 +#define DMARD06_INT_MOV_DETECT 0x40 +#define DMARD06_INT_POS_DETECT 0xc0 + +/* Device modes */ +#define DMARD06_MODE_NORMAL 0x27 +#define DMARD06_MODE_POWERDOWN 0x00 + +/* Input poll interval in milliseconds */ +#define DMARD06_POLL_INTERVAL 10 +#define DMARD06_POLL_MAX 100 +#define DMARD06_POLL_MIN 0 + +struct dmard06_data { + struct i2c_client *client; + struct input_dev *input; + struct input_polled_dev *input_poll; + unsigned long irq_flags; + int range; + u8 chip_id; + u8 mode; +}; + +static int dmard06_i2c_read(struct i2c_client *client, u8 reg, u8 *buf) +{ + int error; + + error = i2c_master_send(client, ®, 1); + if (unlikely(error < 0)) + return error; + + error = i2c_master_recv(client, buf, 1); + if (unlikely(error < 0)) + return error; + + return 0; +} + +static int dmard06_i2c_write(struct i2c_client *client, u8 reg, u8 val) +{ + int error; + u8 buf[2] = {reg, val}; + + error = i2c_master_send(client, buf, 2); + if (unlikely(error < 0)) + return error; + + return 0; +} + +static int dmard06_reset(struct i2c_client *client) +{ + u8 buf; + int error; + + error = dmard06_i2c_read(client, DMARD06_CHIP_RESET_REG, &buf); + if (error) { + dev_err(&client->dev, "Failed to reset controller: %d", error); + return error; + } + + return 0; +} + +static int dmard06_set_mode(struct dmard06_data *dmard06, u8 mode) +{ + int error; + + error = dmard06_i2c_write(dmard06->client, DMARD06_CTRL_1_REG, mode); + if (error) { + dev_err(&dmard06->client->dev, "Failed to set mode: %d", + error); + return error; + } + + dmard06->mode = mode; + + return 0; +} + +static int dmard06_init_irq(struct i2c_client *client) +{ + int error; + + error = dmard06_i2c_write(client, DMARD06_CTRL_4_REG, + DMARD06_INT_SRC1); + if (error) { + dev_err(&client->dev, "Failed to set interrupt source: %d", + error); + return error; + } + + error = dmard06_i2c_write(client, DMARD06_INT_CFG_REG, + DMARD06_INT_POS_DETECT); + if (error) { + dev_err(&client->dev, "Failed to set interrupt event: %d", + error); + return error; + } + + return 0; +} + +static int dmard06_open(struct dmard06_data *dmard06) +{ + int error; + + if (dmard06->mode != DMARD06_MODE_NORMAL) { + error = dmard06_set_mode(dmard06, DMARD06_MODE_NORMAL); + if (error) + return error; + } + + return 0; +} + +static void dmard06_close(struct dmard06_data *dmard06) +{ + if (dmard06->mode != DMARD06_MODE_POWERDOWN) + dmard06_set_mode(dmard06, DMARD06_MODE_POWERDOWN); +} + +static int dmard06_irq_open(struct input_dev *input) +{ + struct dmard06_data *dmard06 = input_get_drvdata(input); + + return dmard06_open(dmard06); +} + +static void dmard06_irq_close(struct input_dev *input) +{ + struct dmard06_data *dmard06 = input_get_drvdata(input); + + dmard06_close(dmard06); +} + +static void dmard06_poll_open(struct input_polled_dev *input_poll) +{ + struct dmard06_data *dmard06 = input_poll->private; + + dmard06_open(dmard06); +} + +static void dmard06_poll_close(struct input_polled_dev *input_poll) +{ + struct dmard06_data *dmard06 = input_poll->private; + + dmard06_close(dmard06); +} + +static int dmard06_read_chip_id(struct dmard06_data *dmard06) +{ + u8 buf; + u8 chip_id; + int error; + + error = dmard06_i2c_read(dmard06->client, DMARD06_CHIP_ID_REG, &buf); + if (error) { + dev_err(&dmard06->client->dev, "Failed to read chip id: %d\n", + error); + return error; + } + + chip_id = (buf & 0x00ff); + if (chip_id != DMARD06_CHIP_ID) { + dev_err(&dmard06->client->dev, "Unknown chip id: %02x\n", + chip_id); + return -EINVAL; + } + + dmard06->chip_id = chip_id; + dev_info(&dmard06->client->dev, "Found DMARD%02x chip\n", chip_id); + + return 0; +} + +static void dmard06_report_xyz(struct dmard06_data *dmard06) +{ + u8 axis[DMARD06_XYZ_DATA_SIZE]; + bool reversed; + int xyz[3]; + int error; + int i; + + error = i2c_smbus_read_i2c_block_data(dmard06->client, + DMARD06_XOUT_REG, + DMARD06_XYZ_DATA_SIZE, axis); + if (error != DMARD06_XYZ_DATA_SIZE) + return; + + for (i = 0; i < DMARD06_XYZ_DATA_SIZE; i++) { + reversed = (axis[i] >> 7) & 1; + xyz[i] = (int)((axis[i] & 0x7f) >> 1); + if (reversed) + xyz[i] = xyz[i] - dmard06->range; + } + + input_report_abs(dmard06->input, ABS_X, xyz[0]); + input_report_abs(dmard06->input, ABS_Y, xyz[1]); + input_report_abs(dmard06->input, ABS_Z, xyz[2]); + input_sync(dmard06->input); +} + +static irqreturn_t dmard06_irq_handler(int irq, void *dev_id) +{ + struct dmard06_data *dmard06 = dev_id; + + dmard06_report_xyz(dmard06); + + return IRQ_HANDLED; +} + +static void dmard06_poll(struct input_polled_dev *input_poll) +{ + dmard06_report_xyz(input_poll->private); +} + +static void dmard06_init_input_device(struct dmard06_data *dmard06, + struct input_dev *input) +{ + int range; + + input->name = "dmard06"; + input->id.bustype = BUS_I2C; + input->id.version = dmard06->chip_id; + input->dev.parent = &dmard06->client->dev; + + set_bit(EV_ABS, input->evbit); + + range = DMARD06_MAX_VALUE; + input_set_abs_params(input, ABS_X, -range, range, 0, 0); + input_set_abs_params(input, ABS_Y, -range, range, 0, 0); + input_set_abs_params(input, ABS_Z, -range, range, 0, 0); + + dmard06->range = range; +} + +static int dmard06_request_input_device(struct dmard06_data *dmard06) +{ + struct input_dev *input; + int error; + + input = devm_input_allocate_device(&dmard06->client->dev); + if (!input) { + dev_err(&dmard06->client->dev, + "Failed to allocate input device\n"); + return -ENOMEM; + } + + dmard06_init_input_device(dmard06, input); + + input->open = dmard06_irq_open; + input->close = dmard06_irq_close; + input_set_drvdata(input, dmard06); + + error = input_register_device(input); + if (error) { + dev_err(&dmard06->client->dev, + "Failed to register input device: %d", error); + return error; + } + + dmard06->input = input; + + return 0; +} + +static int dmard06_request_polled_device(struct dmard06_data *dmard06) +{ + struct input_polled_dev *input_poll; + int error; + + input_poll = devm_input_allocate_polled_device(&dmard06->client->dev); + if (!input_poll) { + dev_err(&dmard06->client->dev, + "Failed to allocate polled input device\n"); + return -ENOMEM; + } + + input_poll->private = dmard06; + input_poll->open = dmard06_poll_open; + input_poll->close = dmard06_poll_close; + input_poll->poll = dmard06_poll; + input_poll->poll_interval = DMARD06_POLL_INTERVAL; + input_poll->poll_interval_min = DMARD06_POLL_MIN; + input_poll->poll_interval_max = DMARD06_POLL_MAX; + + dmard06_init_input_device(dmard06, input_poll->input); + + error = input_register_polled_device(input_poll); + if (error) { + dev_err(&dmard06->client->dev, + "Failed to register polled device: %d", error); + return error; + } + + dmard06->input_poll = input_poll; + dmard06->input = input_poll->input; + + return 0; +} + +static int dmard06_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct dmard06_data *dmard06; + int error; + + dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr); + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "I2C check functionality failed\n"); + return -ENXIO; + } + + dmard06 = devm_kzalloc(&client->dev, sizeof(*dmard06), GFP_KERNEL); + if (!dmard06) + return -ENOMEM; + + dmard06->client = client; + i2c_set_clientdata(client, dmard06); + + error = dmard06_reset(dmard06->client); + if (error) + return error; + + error = dmard06_read_chip_id(dmard06); + if (error) + return error; + + error = dmard06_set_mode(dmard06, DMARD06_MODE_NORMAL); + if (error) + return error; + + if (dmard06->client->irq) { + error = dmard06_init_irq(dmard06->client); + if (error) + return error; + + error = dmard06_request_input_device(dmard06); + if (error) + return error; + + dmard06->irq_flags = IRQ_TYPE_LEVEL_LOW | IRQF_ONESHOT; + error = devm_request_threaded_irq(&dmard06->client->dev, + dmard06->client->irq, NULL, + dmard06_irq_handler, + dmard06->irq_flags, + dmard06->client->name, + dmard06); + if (error) { + dev_err(&dmard06->client->dev, + "Request IRQ failed: %d\n", error); + return error; + } + + } else { + error = dmard06_request_polled_device(dmard06); + if (error) + return error; + } + + return 0; +} + +static const struct i2c_device_id dmard06_id[] = { + { "dmard06", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, dmard06_id); + +static const struct of_device_id dmard06_of_match[] = { + { .compatible = "domintech,dmard06" }, + { } +}; +MODULE_DEVICE_TABLE(of, dmard06_of_match); + +static struct i2c_driver dmard06_driver = { + .probe = dmard06_probe, + .class = I2C_CLASS_HWMON, + .id_table = dmard06_id, + .driver = { + .name = "dmard06", + .of_match_table = of_match_ptr(dmard06_of_match), + }, +}; +module_i2c_driver(dmard06_driver); + +MODULE_AUTHOR("Aleksei Mamlin <mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>"); +MODULE_DESCRIPTION("Domintech DMARD06 accelerometer driver"); +MODULE_LICENSE("GPL v2"); -- 2.7.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 23+ messages in thread
* Re: [PATCH 2/2] input: misc: Add support for Domintech DMARD06 accelerometer 2016-07-18 12:48 ` Aleksei Mamlin (?) @ 2016-07-20 0:02 ` Dmitry Torokhov 2016-07-21 6:13 ` Jonathan Cameron -1 siblings, 1 reply; 23+ messages in thread From: Dmitry Torokhov @ 2016-07-20 0:02 UTC (permalink / raw) To: Aleksei Mamlin Cc: linux-input, devicetree, linux-kernel, Jonathan Cameron, Guenter Roeck On Mon, Jul 18, 2016 at 03:48:12PM +0300, Aleksei Mamlin wrote: > This patch add support for Domintech DMARD06 accelerometer. > > Domintech DMARD06 is a low-g tri-axial digital accelerometer with > special power saving modes suitable for consumer mobile application. I'd say this belongs to IIO. The input/misc accelerometers are mostly legacy. > > Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> > --- > .../devicetree/bindings/input/dmard06.txt | 24 ++ > drivers/input/misc/Kconfig | 12 + > drivers/input/misc/Makefile | 1 + > drivers/input/misc/dmard06.c | 442 +++++++++++++++++++++ > 4 files changed, 479 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/dmard06.txt > create mode 100644 drivers/input/misc/dmard06.c > > diff --git a/Documentation/devicetree/bindings/input/dmard06.txt b/Documentation/devicetree/bindings/input/dmard06.txt > new file mode 100644 > index 0000000..528c318 > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/dmard06.txt > @@ -0,0 +1,24 @@ > +Device tree bindings for Domintech DMARD06 acceletometer > + > +Required properties: > + - compatible : Should be "domintech,dmard06" > + - reg : I2C address of the chip. Should be 0x1c > + > +Optional properties: > + - interrupt-parent : Interrupt controller to which the chip is connected > + - interrupts : Interrupt to which the chip is connected > + > + > +Example: > + &i2c1 { > + /* ... */ > + > + accelerometer@1c { > + compatible = "domintech,dmard06"; > + reg = <0x1c>; > + interrupt-parent = <&gpio>; > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > + }; > + > + /* ... */ > + }; > diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig > index efb0ca8..b95e0e7 100644 > --- a/drivers/input/misc/Kconfig > +++ b/drivers/input/misc/Kconfig > @@ -107,6 +107,18 @@ config INPUT_BMA150 > To compile this driver as a module, choose M here: the > module will be called bma150. > > +config INPUT_DMARD06 > + tristate "Domintech DMARD06 Digital Accelerometer support" > + depends on OF || COMPILE_TEST > + depends on I2C > + select INPUT_POLLDEV > + help > + Say Y to enable support for the Domintech DMARD06 Low-G Tri-Axial > + digital accelerometer connected via an I2C bus. > + > + To compile this driver as a module, choose M here: the > + module will be called dmard06. > + > config INPUT_E3X0_BUTTON > tristate "NI Ettus Research USRP E3xx Button support." > default n > diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile > index 6a1e5e2..d83866f 100644 > --- a/drivers/input/misc/Makefile > +++ b/drivers/input/misc/Makefile > @@ -28,6 +28,7 @@ obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o > obj-$(CONFIG_INPUT_DA9055_ONKEY) += da9055_onkey.o > obj-$(CONFIG_INPUT_DA9063_ONKEY) += da9063_onkey.o > obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o > +obj-$(CONFIG_INPUT_DMARD06) += dmard06.o > obj-$(CONFIG_INPUT_E3X0_BUTTON) += e3x0-button.o > obj-$(CONFIG_INPUT_DRV260X_HAPTICS) += drv260x.o > obj-$(CONFIG_INPUT_DRV2665_HAPTICS) += drv2665.o > diff --git a/drivers/input/misc/dmard06.c b/drivers/input/misc/dmard06.c > new file mode 100644 > index 0000000..cc1e5a2 > --- /dev/null > +++ b/drivers/input/misc/dmard06.c > @@ -0,0 +1,442 @@ > +/* > + * Driver for Domintech DMARD06 accelerometer > + * > + * Copyright (C) 2016 Aleksei Mamlin <mamlinav@gmail.com> > + * Copyright (c) 2012 Domintech Technology Co., Ltd > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License as published by the Free > + * Software Foundation; version 2 of the License. > + */ > + > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/i2c.h> > +#include <linux/input.h> > +#include <linux/input-polldev.h> > +#include <linux/irq.h> > +#include <linux/interrupt.h> > +#include <linux/delay.h> > +#include <linux/slab.h> > +#include <linux/of.h> > + > +/* Device data registers */ > +#define DMARD06_CHIP_ID_REG 0x0f > +#define DMARD06_TOUT_REG 0x40 > +#define DMARD06_XOUT_REG 0x41 > +#define DMARD06_YOUT_REG 0x42 > +#define DMARD06_ZOUT_REG 0x43 > + > +/* Device control registers */ > +#define DMARD06_CTRL_1_REG 0x44 > +#define DMARD06_CTRL_2_REG 0x45 > +#define DMARD06_CTRL_3_REG 0x46 > +#define DMARD06_CTRL_4_REG 0x47 > +#define DMARD06_CTRL_5_REG 0x48 > +#define DMARD06_STATUS_REG 0x49 > +#define DMARD06_INT_CFG_REG 0x4a > +#define DMARD06_FILTER_RESET_REG 0x52 > +#define DMARD06_CHIP_RESET_REG 0x53 > + > +/* Device ID value */ > +#define DMARD06_CHIP_ID 0x06 > + > +/* Device max value */ > +#define DMARD06_MAX_VALUE 0x3f > + > +/* Each axis is represented by a 1-byte data word */ > +#define DMARD06_XYZ_DATA_SIZE 3 > + > +/* Interrupt sources */ > +#define DMARD06_INT_SRC1 0x04 > +#define DMARD06_INT_SRC_BOTH 0x08 > +#define DMARD06_INT_MOV_DETECT 0x40 > +#define DMARD06_INT_POS_DETECT 0xc0 > + > +/* Device modes */ > +#define DMARD06_MODE_NORMAL 0x27 > +#define DMARD06_MODE_POWERDOWN 0x00 > + > +/* Input poll interval in milliseconds */ > +#define DMARD06_POLL_INTERVAL 10 > +#define DMARD06_POLL_MAX 100 > +#define DMARD06_POLL_MIN 0 > + > +struct dmard06_data { > + struct i2c_client *client; > + struct input_dev *input; > + struct input_polled_dev *input_poll; > + unsigned long irq_flags; > + int range; > + u8 chip_id; > + u8 mode; > +}; > + > +static int dmard06_i2c_read(struct i2c_client *client, u8 reg, u8 *buf) > +{ > + int error; > + > + error = i2c_master_send(client, ®, 1); > + if (unlikely(error < 0)) > + return error; > + > + error = i2c_master_recv(client, buf, 1); > + if (unlikely(error < 0)) > + return error; > + > + return 0; > +} > + > +static int dmard06_i2c_write(struct i2c_client *client, u8 reg, u8 val) > +{ > + int error; > + u8 buf[2] = {reg, val}; > + > + error = i2c_master_send(client, buf, 2); > + if (unlikely(error < 0)) > + return error; > + > + return 0; > +} > + > +static int dmard06_reset(struct i2c_client *client) > +{ > + u8 buf; > + int error; > + > + error = dmard06_i2c_read(client, DMARD06_CHIP_RESET_REG, &buf); > + if (error) { > + dev_err(&client->dev, "Failed to reset controller: %d", error); > + return error; > + } > + > + return 0; > +} > + > +static int dmard06_set_mode(struct dmard06_data *dmard06, u8 mode) > +{ > + int error; > + > + error = dmard06_i2c_write(dmard06->client, DMARD06_CTRL_1_REG, mode); > + if (error) { > + dev_err(&dmard06->client->dev, "Failed to set mode: %d", > + error); > + return error; > + } > + > + dmard06->mode = mode; > + > + return 0; > +} > + > +static int dmard06_init_irq(struct i2c_client *client) > +{ > + int error; > + > + error = dmard06_i2c_write(client, DMARD06_CTRL_4_REG, > + DMARD06_INT_SRC1); > + if (error) { > + dev_err(&client->dev, "Failed to set interrupt source: %d", > + error); > + return error; > + } > + > + error = dmard06_i2c_write(client, DMARD06_INT_CFG_REG, > + DMARD06_INT_POS_DETECT); > + if (error) { > + dev_err(&client->dev, "Failed to set interrupt event: %d", > + error); > + return error; > + } > + > + return 0; > +} > + > +static int dmard06_open(struct dmard06_data *dmard06) > +{ > + int error; > + > + if (dmard06->mode != DMARD06_MODE_NORMAL) { > + error = dmard06_set_mode(dmard06, DMARD06_MODE_NORMAL); > + if (error) > + return error; > + } > + > + return 0; > +} > + > +static void dmard06_close(struct dmard06_data *dmard06) > +{ > + if (dmard06->mode != DMARD06_MODE_POWERDOWN) > + dmard06_set_mode(dmard06, DMARD06_MODE_POWERDOWN); > +} > + > +static int dmard06_irq_open(struct input_dev *input) > +{ > + struct dmard06_data *dmard06 = input_get_drvdata(input); > + > + return dmard06_open(dmard06); > +} > + > +static void dmard06_irq_close(struct input_dev *input) > +{ > + struct dmard06_data *dmard06 = input_get_drvdata(input); > + > + dmard06_close(dmard06); > +} > + > +static void dmard06_poll_open(struct input_polled_dev *input_poll) > +{ > + struct dmard06_data *dmard06 = input_poll->private; > + > + dmard06_open(dmard06); > +} > + > +static void dmard06_poll_close(struct input_polled_dev *input_poll) > +{ > + struct dmard06_data *dmard06 = input_poll->private; > + > + dmard06_close(dmard06); > +} > + > +static int dmard06_read_chip_id(struct dmard06_data *dmard06) > +{ > + u8 buf; > + u8 chip_id; > + int error; > + > + error = dmard06_i2c_read(dmard06->client, DMARD06_CHIP_ID_REG, &buf); > + if (error) { > + dev_err(&dmard06->client->dev, "Failed to read chip id: %d\n", > + error); > + return error; > + } > + > + chip_id = (buf & 0x00ff); > + if (chip_id != DMARD06_CHIP_ID) { > + dev_err(&dmard06->client->dev, "Unknown chip id: %02x\n", > + chip_id); > + return -EINVAL; > + } > + > + dmard06->chip_id = chip_id; > + dev_info(&dmard06->client->dev, "Found DMARD%02x chip\n", chip_id); > + > + return 0; > +} > + > +static void dmard06_report_xyz(struct dmard06_data *dmard06) > +{ > + u8 axis[DMARD06_XYZ_DATA_SIZE]; > + bool reversed; > + int xyz[3]; > + int error; > + int i; > + > + error = i2c_smbus_read_i2c_block_data(dmard06->client, > + DMARD06_XOUT_REG, > + DMARD06_XYZ_DATA_SIZE, axis); > + if (error != DMARD06_XYZ_DATA_SIZE) > + return; > + > + for (i = 0; i < DMARD06_XYZ_DATA_SIZE; i++) { > + reversed = (axis[i] >> 7) & 1; > + xyz[i] = (int)((axis[i] & 0x7f) >> 1); > + if (reversed) > + xyz[i] = xyz[i] - dmard06->range; > + } > + > + input_report_abs(dmard06->input, ABS_X, xyz[0]); > + input_report_abs(dmard06->input, ABS_Y, xyz[1]); > + input_report_abs(dmard06->input, ABS_Z, xyz[2]); > + input_sync(dmard06->input); > +} > + > +static irqreturn_t dmard06_irq_handler(int irq, void *dev_id) > +{ > + struct dmard06_data *dmard06 = dev_id; > + > + dmard06_report_xyz(dmard06); > + > + return IRQ_HANDLED; > +} > + > +static void dmard06_poll(struct input_polled_dev *input_poll) > +{ > + dmard06_report_xyz(input_poll->private); > +} > + > +static void dmard06_init_input_device(struct dmard06_data *dmard06, > + struct input_dev *input) > +{ > + int range; > + > + input->name = "dmard06"; > + input->id.bustype = BUS_I2C; > + input->id.version = dmard06->chip_id; > + input->dev.parent = &dmard06->client->dev; > + > + set_bit(EV_ABS, input->evbit); > + > + range = DMARD06_MAX_VALUE; > + input_set_abs_params(input, ABS_X, -range, range, 0, 0); > + input_set_abs_params(input, ABS_Y, -range, range, 0, 0); > + input_set_abs_params(input, ABS_Z, -range, range, 0, 0); > + > + dmard06->range = range; > +} > + > +static int dmard06_request_input_device(struct dmard06_data *dmard06) > +{ > + struct input_dev *input; > + int error; > + > + input = devm_input_allocate_device(&dmard06->client->dev); > + if (!input) { > + dev_err(&dmard06->client->dev, > + "Failed to allocate input device\n"); > + return -ENOMEM; > + } > + > + dmard06_init_input_device(dmard06, input); > + > + input->open = dmard06_irq_open; > + input->close = dmard06_irq_close; > + input_set_drvdata(input, dmard06); > + > + error = input_register_device(input); > + if (error) { > + dev_err(&dmard06->client->dev, > + "Failed to register input device: %d", error); > + return error; > + } > + > + dmard06->input = input; > + > + return 0; > +} > + > +static int dmard06_request_polled_device(struct dmard06_data *dmard06) > +{ > + struct input_polled_dev *input_poll; > + int error; > + > + input_poll = devm_input_allocate_polled_device(&dmard06->client->dev); > + if (!input_poll) { > + dev_err(&dmard06->client->dev, > + "Failed to allocate polled input device\n"); > + return -ENOMEM; > + } > + > + input_poll->private = dmard06; > + input_poll->open = dmard06_poll_open; > + input_poll->close = dmard06_poll_close; > + input_poll->poll = dmard06_poll; > + input_poll->poll_interval = DMARD06_POLL_INTERVAL; > + input_poll->poll_interval_min = DMARD06_POLL_MIN; > + input_poll->poll_interval_max = DMARD06_POLL_MAX; > + > + dmard06_init_input_device(dmard06, input_poll->input); > + > + error = input_register_polled_device(input_poll); > + if (error) { > + dev_err(&dmard06->client->dev, > + "Failed to register polled device: %d", error); > + return error; > + } > + > + dmard06->input_poll = input_poll; > + dmard06->input = input_poll->input; > + > + return 0; > +} > + > +static int dmard06_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct dmard06_data *dmard06; > + int error; > + > + dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr); > + > + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { > + dev_err(&client->dev, "I2C check functionality failed\n"); > + return -ENXIO; > + } > + > + dmard06 = devm_kzalloc(&client->dev, sizeof(*dmard06), GFP_KERNEL); > + if (!dmard06) > + return -ENOMEM; > + > + dmard06->client = client; > + i2c_set_clientdata(client, dmard06); > + > + error = dmard06_reset(dmard06->client); > + if (error) > + return error; > + > + error = dmard06_read_chip_id(dmard06); > + if (error) > + return error; > + > + error = dmard06_set_mode(dmard06, DMARD06_MODE_NORMAL); > + if (error) > + return error; > + > + if (dmard06->client->irq) { > + error = dmard06_init_irq(dmard06->client); > + if (error) > + return error; > + > + error = dmard06_request_input_device(dmard06); > + if (error) > + return error; > + > + dmard06->irq_flags = IRQ_TYPE_LEVEL_LOW | IRQF_ONESHOT; > + error = devm_request_threaded_irq(&dmard06->client->dev, > + dmard06->client->irq, NULL, > + dmard06_irq_handler, > + dmard06->irq_flags, > + dmard06->client->name, > + dmard06); > + if (error) { > + dev_err(&dmard06->client->dev, > + "Request IRQ failed: %d\n", error); > + return error; > + } > + > + } else { > + error = dmard06_request_polled_device(dmard06); > + if (error) > + return error; > + } > + > + return 0; > +} > + > +static const struct i2c_device_id dmard06_id[] = { > + { "dmard06", 0 }, > + { } > +}; > +MODULE_DEVICE_TABLE(i2c, dmard06_id); > + > +static const struct of_device_id dmard06_of_match[] = { > + { .compatible = "domintech,dmard06" }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, dmard06_of_match); > + > +static struct i2c_driver dmard06_driver = { > + .probe = dmard06_probe, > + .class = I2C_CLASS_HWMON, > + .id_table = dmard06_id, > + .driver = { > + .name = "dmard06", > + .of_match_table = of_match_ptr(dmard06_of_match), > + }, > +}; > +module_i2c_driver(dmard06_driver); > + > +MODULE_AUTHOR("Aleksei Mamlin <mamlinav@gmail.com>"); > +MODULE_DESCRIPTION("Domintech DMARD06 accelerometer driver"); > +MODULE_LICENSE("GPL v2"); > -- > 2.7.3 > -- Dmitry ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 2/2] input: misc: Add support for Domintech DMARD06 accelerometer 2016-07-20 0:02 ` Dmitry Torokhov @ 2016-07-21 6:13 ` Jonathan Cameron 2016-07-21 6:35 ` Aleksei Mamlin 0 siblings, 1 reply; 23+ messages in thread From: Jonathan Cameron @ 2016-07-21 6:13 UTC (permalink / raw) To: Dmitry Torokhov, Aleksei Mamlin Cc: linux-input, devicetree, linux-kernel, Jonathan Cameron, Guenter Roeck On 20/07/16 01:02, Dmitry Torokhov wrote: > On Mon, Jul 18, 2016 at 03:48:12PM +0300, Aleksei Mamlin wrote: >> This patch add support for Domintech DMARD06 accelerometer. >> >> Domintech DMARD06 is a low-g tri-axial digital accelerometer with >> special power saving modes suitable for consumer mobile application. > > I'd say this belongs to IIO. The input/misc accelerometers are mostly > legacy. Also note we have a dmard09 driver under review on the IIO list at the moment. At quick glance, this looks to have a totally different register set though so probably doesn't make sense to combine the drivers. Do you have docs for this part? The dmard09 driver was written based on a vendor driver so little is known about what the other registers are for! Jonathan > >> >> Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> >> --- >> .../devicetree/bindings/input/dmard06.txt | 24 ++ >> drivers/input/misc/Kconfig | 12 + >> drivers/input/misc/Makefile | 1 + >> drivers/input/misc/dmard06.c | 442 +++++++++++++++++++++ >> 4 files changed, 479 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/input/dmard06.txt >> create mode 100644 drivers/input/misc/dmard06.c >> >> diff --git a/Documentation/devicetree/bindings/input/dmard06.txt b/Documentation/devicetree/bindings/input/dmard06.txt >> new file mode 100644 >> index 0000000..528c318 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/input/dmard06.txt >> @@ -0,0 +1,24 @@ >> +Device tree bindings for Domintech DMARD06 acceletometer >> + >> +Required properties: >> + - compatible : Should be "domintech,dmard06" >> + - reg : I2C address of the chip. Should be 0x1c >> + >> +Optional properties: >> + - interrupt-parent : Interrupt controller to which the chip is connected >> + - interrupts : Interrupt to which the chip is connected >> + >> + >> +Example: >> + &i2c1 { >> + /* ... */ >> + >> + accelerometer@1c { >> + compatible = "domintech,dmard06"; >> + reg = <0x1c>; >> + interrupt-parent = <&gpio>; >> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; >> + }; >> + >> + /* ... */ >> + }; >> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig >> index efb0ca8..b95e0e7 100644 >> --- a/drivers/input/misc/Kconfig >> +++ b/drivers/input/misc/Kconfig >> @@ -107,6 +107,18 @@ config INPUT_BMA150 >> To compile this driver as a module, choose M here: the >> module will be called bma150. >> >> +config INPUT_DMARD06 >> + tristate "Domintech DMARD06 Digital Accelerometer support" >> + depends on OF || COMPILE_TEST >> + depends on I2C >> + select INPUT_POLLDEV >> + help >> + Say Y to enable support for the Domintech DMARD06 Low-G Tri-Axial >> + digital accelerometer connected via an I2C bus. >> + >> + To compile this driver as a module, choose M here: the >> + module will be called dmard06. >> + >> config INPUT_E3X0_BUTTON >> tristate "NI Ettus Research USRP E3xx Button support." >> default n >> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile >> index 6a1e5e2..d83866f 100644 >> --- a/drivers/input/misc/Makefile >> +++ b/drivers/input/misc/Makefile >> @@ -28,6 +28,7 @@ obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o >> obj-$(CONFIG_INPUT_DA9055_ONKEY) += da9055_onkey.o >> obj-$(CONFIG_INPUT_DA9063_ONKEY) += da9063_onkey.o >> obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o >> +obj-$(CONFIG_INPUT_DMARD06) += dmard06.o >> obj-$(CONFIG_INPUT_E3X0_BUTTON) += e3x0-button.o >> obj-$(CONFIG_INPUT_DRV260X_HAPTICS) += drv260x.o >> obj-$(CONFIG_INPUT_DRV2665_HAPTICS) += drv2665.o >> diff --git a/drivers/input/misc/dmard06.c b/drivers/input/misc/dmard06.c >> new file mode 100644 >> index 0000000..cc1e5a2 >> --- /dev/null >> +++ b/drivers/input/misc/dmard06.c >> @@ -0,0 +1,442 @@ >> +/* >> + * Driver for Domintech DMARD06 accelerometer >> + * >> + * Copyright (C) 2016 Aleksei Mamlin <mamlinav@gmail.com> >> + * Copyright (c) 2012 Domintech Technology Co., Ltd >> + * >> + * This program is free software; you can redistribute it and/or modify it >> + * under the terms of the GNU General Public License as published by the Free >> + * Software Foundation; version 2 of the License. >> + */ >> + >> +#include <linux/kernel.h> >> +#include <linux/module.h> >> +#include <linux/i2c.h> >> +#include <linux/input.h> >> +#include <linux/input-polldev.h> >> +#include <linux/irq.h> >> +#include <linux/interrupt.h> >> +#include <linux/delay.h> >> +#include <linux/slab.h> >> +#include <linux/of.h> >> + >> +/* Device data registers */ >> +#define DMARD06_CHIP_ID_REG 0x0f >> +#define DMARD06_TOUT_REG 0x40 >> +#define DMARD06_XOUT_REG 0x41 >> +#define DMARD06_YOUT_REG 0x42 >> +#define DMARD06_ZOUT_REG 0x43 >> + >> +/* Device control registers */ >> +#define DMARD06_CTRL_1_REG 0x44 >> +#define DMARD06_CTRL_2_REG 0x45 >> +#define DMARD06_CTRL_3_REG 0x46 >> +#define DMARD06_CTRL_4_REG 0x47 >> +#define DMARD06_CTRL_5_REG 0x48 >> +#define DMARD06_STATUS_REG 0x49 >> +#define DMARD06_INT_CFG_REG 0x4a >> +#define DMARD06_FILTER_RESET_REG 0x52 >> +#define DMARD06_CHIP_RESET_REG 0x53 >> + >> +/* Device ID value */ >> +#define DMARD06_CHIP_ID 0x06 >> + >> +/* Device max value */ >> +#define DMARD06_MAX_VALUE 0x3f >> + >> +/* Each axis is represented by a 1-byte data word */ >> +#define DMARD06_XYZ_DATA_SIZE 3 >> + >> +/* Interrupt sources */ >> +#define DMARD06_INT_SRC1 0x04 >> +#define DMARD06_INT_SRC_BOTH 0x08 >> +#define DMARD06_INT_MOV_DETECT 0x40 >> +#define DMARD06_INT_POS_DETECT 0xc0 >> + >> +/* Device modes */ >> +#define DMARD06_MODE_NORMAL 0x27 >> +#define DMARD06_MODE_POWERDOWN 0x00 >> + >> +/* Input poll interval in milliseconds */ >> +#define DMARD06_POLL_INTERVAL 10 >> +#define DMARD06_POLL_MAX 100 >> +#define DMARD06_POLL_MIN 0 >> + >> +struct dmard06_data { >> + struct i2c_client *client; >> + struct input_dev *input; >> + struct input_polled_dev *input_poll; >> + unsigned long irq_flags; >> + int range; >> + u8 chip_id; >> + u8 mode; >> +}; >> + >> +static int dmard06_i2c_read(struct i2c_client *client, u8 reg, u8 *buf) >> +{ >> + int error; >> + >> + error = i2c_master_send(client, ®, 1); >> + if (unlikely(error < 0)) >> + return error; >> + >> + error = i2c_master_recv(client, buf, 1); >> + if (unlikely(error < 0)) >> + return error; >> + >> + return 0; >> +} >> + >> +static int dmard06_i2c_write(struct i2c_client *client, u8 reg, u8 val) >> +{ >> + int error; >> + u8 buf[2] = {reg, val}; >> + >> + error = i2c_master_send(client, buf, 2); >> + if (unlikely(error < 0)) >> + return error; >> + >> + return 0; >> +} >> + >> +static int dmard06_reset(struct i2c_client *client) >> +{ >> + u8 buf; >> + int error; >> + >> + error = dmard06_i2c_read(client, DMARD06_CHIP_RESET_REG, &buf); >> + if (error) { >> + dev_err(&client->dev, "Failed to reset controller: %d", error); >> + return error; >> + } >> + >> + return 0; >> +} >> + >> +static int dmard06_set_mode(struct dmard06_data *dmard06, u8 mode) >> +{ >> + int error; >> + >> + error = dmard06_i2c_write(dmard06->client, DMARD06_CTRL_1_REG, mode); >> + if (error) { >> + dev_err(&dmard06->client->dev, "Failed to set mode: %d", >> + error); >> + return error; >> + } >> + >> + dmard06->mode = mode; >> + >> + return 0; >> +} >> + >> +static int dmard06_init_irq(struct i2c_client *client) >> +{ >> + int error; >> + >> + error = dmard06_i2c_write(client, DMARD06_CTRL_4_REG, >> + DMARD06_INT_SRC1); >> + if (error) { >> + dev_err(&client->dev, "Failed to set interrupt source: %d", >> + error); >> + return error; >> + } >> + >> + error = dmard06_i2c_write(client, DMARD06_INT_CFG_REG, >> + DMARD06_INT_POS_DETECT); >> + if (error) { >> + dev_err(&client->dev, "Failed to set interrupt event: %d", >> + error); >> + return error; >> + } >> + >> + return 0; >> +} >> + >> +static int dmard06_open(struct dmard06_data *dmard06) >> +{ >> + int error; >> + >> + if (dmard06->mode != DMARD06_MODE_NORMAL) { >> + error = dmard06_set_mode(dmard06, DMARD06_MODE_NORMAL); >> + if (error) >> + return error; >> + } >> + >> + return 0; >> +} >> + >> +static void dmard06_close(struct dmard06_data *dmard06) >> +{ >> + if (dmard06->mode != DMARD06_MODE_POWERDOWN) >> + dmard06_set_mode(dmard06, DMARD06_MODE_POWERDOWN); >> +} >> + >> +static int dmard06_irq_open(struct input_dev *input) >> +{ >> + struct dmard06_data *dmard06 = input_get_drvdata(input); >> + >> + return dmard06_open(dmard06); >> +} >> + >> +static void dmard06_irq_close(struct input_dev *input) >> +{ >> + struct dmard06_data *dmard06 = input_get_drvdata(input); >> + >> + dmard06_close(dmard06); >> +} >> + >> +static void dmard06_poll_open(struct input_polled_dev *input_poll) >> +{ >> + struct dmard06_data *dmard06 = input_poll->private; >> + >> + dmard06_open(dmard06); >> +} >> + >> +static void dmard06_poll_close(struct input_polled_dev *input_poll) >> +{ >> + struct dmard06_data *dmard06 = input_poll->private; >> + >> + dmard06_close(dmard06); >> +} >> + >> +static int dmard06_read_chip_id(struct dmard06_data *dmard06) >> +{ >> + u8 buf; >> + u8 chip_id; >> + int error; >> + >> + error = dmard06_i2c_read(dmard06->client, DMARD06_CHIP_ID_REG, &buf); >> + if (error) { >> + dev_err(&dmard06->client->dev, "Failed to read chip id: %d\n", >> + error); >> + return error; >> + } >> + >> + chip_id = (buf & 0x00ff); >> + if (chip_id != DMARD06_CHIP_ID) { >> + dev_err(&dmard06->client->dev, "Unknown chip id: %02x\n", >> + chip_id); >> + return -EINVAL; >> + } >> + >> + dmard06->chip_id = chip_id; >> + dev_info(&dmard06->client->dev, "Found DMARD%02x chip\n", chip_id); >> + >> + return 0; >> +} >> + >> +static void dmard06_report_xyz(struct dmard06_data *dmard06) >> +{ >> + u8 axis[DMARD06_XYZ_DATA_SIZE]; >> + bool reversed; >> + int xyz[3]; >> + int error; >> + int i; >> + >> + error = i2c_smbus_read_i2c_block_data(dmard06->client, >> + DMARD06_XOUT_REG, >> + DMARD06_XYZ_DATA_SIZE, axis); >> + if (error != DMARD06_XYZ_DATA_SIZE) >> + return; >> + >> + for (i = 0; i < DMARD06_XYZ_DATA_SIZE; i++) { >> + reversed = (axis[i] >> 7) & 1; >> + xyz[i] = (int)((axis[i] & 0x7f) >> 1); >> + if (reversed) >> + xyz[i] = xyz[i] - dmard06->range; >> + } >> + >> + input_report_abs(dmard06->input, ABS_X, xyz[0]); >> + input_report_abs(dmard06->input, ABS_Y, xyz[1]); >> + input_report_abs(dmard06->input, ABS_Z, xyz[2]); >> + input_sync(dmard06->input); >> +} >> + >> +static irqreturn_t dmard06_irq_handler(int irq, void *dev_id) >> +{ >> + struct dmard06_data *dmard06 = dev_id; >> + >> + dmard06_report_xyz(dmard06); >> + >> + return IRQ_HANDLED; >> +} >> + >> +static void dmard06_poll(struct input_polled_dev *input_poll) >> +{ >> + dmard06_report_xyz(input_poll->private); >> +} >> + >> +static void dmard06_init_input_device(struct dmard06_data *dmard06, >> + struct input_dev *input) >> +{ >> + int range; >> + >> + input->name = "dmard06"; >> + input->id.bustype = BUS_I2C; >> + input->id.version = dmard06->chip_id; >> + input->dev.parent = &dmard06->client->dev; >> + >> + set_bit(EV_ABS, input->evbit); >> + >> + range = DMARD06_MAX_VALUE; >> + input_set_abs_params(input, ABS_X, -range, range, 0, 0); >> + input_set_abs_params(input, ABS_Y, -range, range, 0, 0); >> + input_set_abs_params(input, ABS_Z, -range, range, 0, 0); >> + >> + dmard06->range = range; >> +} >> + >> +static int dmard06_request_input_device(struct dmard06_data *dmard06) >> +{ >> + struct input_dev *input; >> + int error; >> + >> + input = devm_input_allocate_device(&dmard06->client->dev); >> + if (!input) { >> + dev_err(&dmard06->client->dev, >> + "Failed to allocate input device\n"); >> + return -ENOMEM; >> + } >> + >> + dmard06_init_input_device(dmard06, input); >> + >> + input->open = dmard06_irq_open; >> + input->close = dmard06_irq_close; >> + input_set_drvdata(input, dmard06); >> + >> + error = input_register_device(input); >> + if (error) { >> + dev_err(&dmard06->client->dev, >> + "Failed to register input device: %d", error); >> + return error; >> + } >> + >> + dmard06->input = input; >> + >> + return 0; >> +} >> + >> +static int dmard06_request_polled_device(struct dmard06_data *dmard06) >> +{ >> + struct input_polled_dev *input_poll; >> + int error; >> + >> + input_poll = devm_input_allocate_polled_device(&dmard06->client->dev); >> + if (!input_poll) { >> + dev_err(&dmard06->client->dev, >> + "Failed to allocate polled input device\n"); >> + return -ENOMEM; >> + } >> + >> + input_poll->private = dmard06; >> + input_poll->open = dmard06_poll_open; >> + input_poll->close = dmard06_poll_close; >> + input_poll->poll = dmard06_poll; >> + input_poll->poll_interval = DMARD06_POLL_INTERVAL; >> + input_poll->poll_interval_min = DMARD06_POLL_MIN; >> + input_poll->poll_interval_max = DMARD06_POLL_MAX; >> + >> + dmard06_init_input_device(dmard06, input_poll->input); >> + >> + error = input_register_polled_device(input_poll); >> + if (error) { >> + dev_err(&dmard06->client->dev, >> + "Failed to register polled device: %d", error); >> + return error; >> + } >> + >> + dmard06->input_poll = input_poll; >> + dmard06->input = input_poll->input; >> + >> + return 0; >> +} >> + >> +static int dmard06_probe(struct i2c_client *client, >> + const struct i2c_device_id *id) >> +{ >> + struct dmard06_data *dmard06; >> + int error; >> + >> + dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr); >> + >> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { >> + dev_err(&client->dev, "I2C check functionality failed\n"); >> + return -ENXIO; >> + } >> + >> + dmard06 = devm_kzalloc(&client->dev, sizeof(*dmard06), GFP_KERNEL); >> + if (!dmard06) >> + return -ENOMEM; >> + >> + dmard06->client = client; >> + i2c_set_clientdata(client, dmard06); >> + >> + error = dmard06_reset(dmard06->client); >> + if (error) >> + return error; >> + >> + error = dmard06_read_chip_id(dmard06); >> + if (error) >> + return error; >> + >> + error = dmard06_set_mode(dmard06, DMARD06_MODE_NORMAL); >> + if (error) >> + return error; >> + >> + if (dmard06->client->irq) { >> + error = dmard06_init_irq(dmard06->client); >> + if (error) >> + return error; >> + >> + error = dmard06_request_input_device(dmard06); >> + if (error) >> + return error; >> + >> + dmard06->irq_flags = IRQ_TYPE_LEVEL_LOW | IRQF_ONESHOT; >> + error = devm_request_threaded_irq(&dmard06->client->dev, >> + dmard06->client->irq, NULL, >> + dmard06_irq_handler, >> + dmard06->irq_flags, >> + dmard06->client->name, >> + dmard06); >> + if (error) { >> + dev_err(&dmard06->client->dev, >> + "Request IRQ failed: %d\n", error); >> + return error; >> + } >> + >> + } else { >> + error = dmard06_request_polled_device(dmard06); >> + if (error) >> + return error; >> + } >> + >> + return 0; >> +} >> + >> +static const struct i2c_device_id dmard06_id[] = { >> + { "dmard06", 0 }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(i2c, dmard06_id); >> + >> +static const struct of_device_id dmard06_of_match[] = { >> + { .compatible = "domintech,dmard06" }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(of, dmard06_of_match); >> + >> +static struct i2c_driver dmard06_driver = { >> + .probe = dmard06_probe, >> + .class = I2C_CLASS_HWMON, >> + .id_table = dmard06_id, >> + .driver = { >> + .name = "dmard06", >> + .of_match_table = of_match_ptr(dmard06_of_match), >> + }, >> +}; >> +module_i2c_driver(dmard06_driver); >> + >> +MODULE_AUTHOR("Aleksei Mamlin <mamlinav@gmail.com>"); >> +MODULE_DESCRIPTION("Domintech DMARD06 accelerometer driver"); >> +MODULE_LICENSE("GPL v2"); >> -- >> 2.7.3 >> > ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 2/2] input: misc: Add support for Domintech DMARD06 accelerometer 2016-07-21 6:13 ` Jonathan Cameron @ 2016-07-21 6:35 ` Aleksei Mamlin 0 siblings, 0 replies; 23+ messages in thread From: Aleksei Mamlin @ 2016-07-21 6:35 UTC (permalink / raw) To: Jonathan Cameron Cc: Dmitry Torokhov, linux-input, devicetree, linux-kernel, Guenter Roeck On Thu, 21 Jul 2016 07:13:05 +0100 Jonathan Cameron <jic23@kernel.org> wrote: > On 20/07/16 01:02, Dmitry Torokhov wrote: > > On Mon, Jul 18, 2016 at 03:48:12PM +0300, Aleksei Mamlin wrote: > >> This patch add support for Domintech DMARD06 accelerometer. > >> > >> Domintech DMARD06 is a low-g tri-axial digital accelerometer with > >> special power saving modes suitable for consumer mobile application. > > > > I'd say this belongs to IIO. The input/misc accelerometers are mostly > > legacy. > Also note we have a dmard09 driver under review on the IIO list > at the moment. At quick glance, this looks to have a totally different > register set though so probably doesn't make sense to combine the > drivers. > I see dmard09 driver in linux-iio list and already prepare basic iio driver for dmard06. I'll send it to linux-iio list today. As you said, dmard06 and dmard09 use completely different registers. > > Do you have docs for this part? The dmard09 driver was written > based on a vendor driver so little is known about what the other registers > are for! I have dmard05, dmard06 and dmard07 datasheets, but never seen dmard09. Most of dmard06 registers used for interrupt source and events configuration, power control and filtering. > > Jonathan > > > >> > >> Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> > >> --- > >> .../devicetree/bindings/input/dmard06.txt | 24 ++ > >> drivers/input/misc/Kconfig | 12 + > >> drivers/input/misc/Makefile | 1 + > >> drivers/input/misc/dmard06.c | 442 +++++++++++++++++++++ > >> 4 files changed, 479 insertions(+) > >> create mode 100644 Documentation/devicetree/bindings/input/dmard06.txt > >> create mode 100644 drivers/input/misc/dmard06.c > >> > >> diff --git a/Documentation/devicetree/bindings/input/dmard06.txt b/Documentation/devicetree/bindings/input/dmard06.txt > >> new file mode 100644 > >> index 0000000..528c318 > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/input/dmard06.txt > >> @@ -0,0 +1,24 @@ > >> +Device tree bindings for Domintech DMARD06 acceletometer > >> + > >> +Required properties: > >> + - compatible : Should be "domintech,dmard06" > >> + - reg : I2C address of the chip. Should be 0x1c > >> + > >> +Optional properties: > >> + - interrupt-parent : Interrupt controller to which the chip is connected > >> + - interrupts : Interrupt to which the chip is connected > >> + > >> + > >> +Example: > >> + &i2c1 { > >> + /* ... */ > >> + > >> + accelerometer@1c { > >> + compatible = "domintech,dmard06"; > >> + reg = <0x1c>; > >> + interrupt-parent = <&gpio>; > >> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > >> + }; > >> + > >> + /* ... */ > >> + }; > >> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig > >> index efb0ca8..b95e0e7 100644 > >> --- a/drivers/input/misc/Kconfig > >> +++ b/drivers/input/misc/Kconfig > >> @@ -107,6 +107,18 @@ config INPUT_BMA150 > >> To compile this driver as a module, choose M here: the > >> module will be called bma150. > >> > >> +config INPUT_DMARD06 > >> + tristate "Domintech DMARD06 Digital Accelerometer support" > >> + depends on OF || COMPILE_TEST > >> + depends on I2C > >> + select INPUT_POLLDEV > >> + help > >> + Say Y to enable support for the Domintech DMARD06 Low-G Tri-Axial > >> + digital accelerometer connected via an I2C bus. > >> + > >> + To compile this driver as a module, choose M here: the > >> + module will be called dmard06. > >> + > >> config INPUT_E3X0_BUTTON > >> tristate "NI Ettus Research USRP E3xx Button support." > >> default n > >> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile > >> index 6a1e5e2..d83866f 100644 > >> --- a/drivers/input/misc/Makefile > >> +++ b/drivers/input/misc/Makefile > >> @@ -28,6 +28,7 @@ obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o > >> obj-$(CONFIG_INPUT_DA9055_ONKEY) += da9055_onkey.o > >> obj-$(CONFIG_INPUT_DA9063_ONKEY) += da9063_onkey.o > >> obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o > >> +obj-$(CONFIG_INPUT_DMARD06) += dmard06.o > >> obj-$(CONFIG_INPUT_E3X0_BUTTON) += e3x0-button.o > >> obj-$(CONFIG_INPUT_DRV260X_HAPTICS) += drv260x.o > >> obj-$(CONFIG_INPUT_DRV2665_HAPTICS) += drv2665.o > >> diff --git a/drivers/input/misc/dmard06.c b/drivers/input/misc/dmard06.c > >> new file mode 100644 > >> index 0000000..cc1e5a2 > >> --- /dev/null > >> +++ b/drivers/input/misc/dmard06.c > >> @@ -0,0 +1,442 @@ > >> +/* > >> + * Driver for Domintech DMARD06 accelerometer > >> + * > >> + * Copyright (C) 2016 Aleksei Mamlin <mamlinav@gmail.com> > >> + * Copyright (c) 2012 Domintech Technology Co., Ltd > >> + * > >> + * This program is free software; you can redistribute it and/or modify it > >> + * under the terms of the GNU General Public License as published by the Free > >> + * Software Foundation; version 2 of the License. > >> + */ > >> + > >> +#include <linux/kernel.h> > >> +#include <linux/module.h> > >> +#include <linux/i2c.h> > >> +#include <linux/input.h> > >> +#include <linux/input-polldev.h> > >> +#include <linux/irq.h> > >> +#include <linux/interrupt.h> > >> +#include <linux/delay.h> > >> +#include <linux/slab.h> > >> +#include <linux/of.h> > >> + > >> +/* Device data registers */ > >> +#define DMARD06_CHIP_ID_REG 0x0f > >> +#define DMARD06_TOUT_REG 0x40 > >> +#define DMARD06_XOUT_REG 0x41 > >> +#define DMARD06_YOUT_REG 0x42 > >> +#define DMARD06_ZOUT_REG 0x43 > >> + > >> +/* Device control registers */ > >> +#define DMARD06_CTRL_1_REG 0x44 > >> +#define DMARD06_CTRL_2_REG 0x45 > >> +#define DMARD06_CTRL_3_REG 0x46 > >> +#define DMARD06_CTRL_4_REG 0x47 > >> +#define DMARD06_CTRL_5_REG 0x48 > >> +#define DMARD06_STATUS_REG 0x49 > >> +#define DMARD06_INT_CFG_REG 0x4a > >> +#define DMARD06_FILTER_RESET_REG 0x52 > >> +#define DMARD06_CHIP_RESET_REG 0x53 > >> + > >> +/* Device ID value */ > >> +#define DMARD06_CHIP_ID 0x06 > >> + > >> +/* Device max value */ > >> +#define DMARD06_MAX_VALUE 0x3f > >> + > >> +/* Each axis is represented by a 1-byte data word */ > >> +#define DMARD06_XYZ_DATA_SIZE 3 > >> + > >> +/* Interrupt sources */ > >> +#define DMARD06_INT_SRC1 0x04 > >> +#define DMARD06_INT_SRC_BOTH 0x08 > >> +#define DMARD06_INT_MOV_DETECT 0x40 > >> +#define DMARD06_INT_POS_DETECT 0xc0 > >> + > >> +/* Device modes */ > >> +#define DMARD06_MODE_NORMAL 0x27 > >> +#define DMARD06_MODE_POWERDOWN 0x00 > >> + > >> +/* Input poll interval in milliseconds */ > >> +#define DMARD06_POLL_INTERVAL 10 > >> +#define DMARD06_POLL_MAX 100 > >> +#define DMARD06_POLL_MIN 0 > >> + > >> +struct dmard06_data { > >> + struct i2c_client *client; > >> + struct input_dev *input; > >> + struct input_polled_dev *input_poll; > >> + unsigned long irq_flags; > >> + int range; > >> + u8 chip_id; > >> + u8 mode; > >> +}; > >> + > >> +static int dmard06_i2c_read(struct i2c_client *client, u8 reg, u8 *buf) > >> +{ > >> + int error; > >> + > >> + error = i2c_master_send(client, ®, 1); > >> + if (unlikely(error < 0)) > >> + return error; > >> + > >> + error = i2c_master_recv(client, buf, 1); > >> + if (unlikely(error < 0)) > >> + return error; > >> + > >> + return 0; > >> +} > >> + > >> +static int dmard06_i2c_write(struct i2c_client *client, u8 reg, u8 val) > >> +{ > >> + int error; > >> + u8 buf[2] = {reg, val}; > >> + > >> + error = i2c_master_send(client, buf, 2); > >> + if (unlikely(error < 0)) > >> + return error; > >> + > >> + return 0; > >> +} > >> + > >> +static int dmard06_reset(struct i2c_client *client) > >> +{ > >> + u8 buf; > >> + int error; > >> + > >> + error = dmard06_i2c_read(client, DMARD06_CHIP_RESET_REG, &buf); > >> + if (error) { > >> + dev_err(&client->dev, "Failed to reset controller: %d", error); > >> + return error; > >> + } > >> + > >> + return 0; > >> +} > >> + > >> +static int dmard06_set_mode(struct dmard06_data *dmard06, u8 mode) > >> +{ > >> + int error; > >> + > >> + error = dmard06_i2c_write(dmard06->client, DMARD06_CTRL_1_REG, mode); > >> + if (error) { > >> + dev_err(&dmard06->client->dev, "Failed to set mode: %d", > >> + error); > >> + return error; > >> + } > >> + > >> + dmard06->mode = mode; > >> + > >> + return 0; > >> +} > >> + > >> +static int dmard06_init_irq(struct i2c_client *client) > >> +{ > >> + int error; > >> + > >> + error = dmard06_i2c_write(client, DMARD06_CTRL_4_REG, > >> + DMARD06_INT_SRC1); > >> + if (error) { > >> + dev_err(&client->dev, "Failed to set interrupt source: %d", > >> + error); > >> + return error; > >> + } > >> + > >> + error = dmard06_i2c_write(client, DMARD06_INT_CFG_REG, > >> + DMARD06_INT_POS_DETECT); > >> + if (error) { > >> + dev_err(&client->dev, "Failed to set interrupt event: %d", > >> + error); > >> + return error; > >> + } > >> + > >> + return 0; > >> +} > >> + > >> +static int dmard06_open(struct dmard06_data *dmard06) > >> +{ > >> + int error; > >> + > >> + if (dmard06->mode != DMARD06_MODE_NORMAL) { > >> + error = dmard06_set_mode(dmard06, DMARD06_MODE_NORMAL); > >> + if (error) > >> + return error; > >> + } > >> + > >> + return 0; > >> +} > >> + > >> +static void dmard06_close(struct dmard06_data *dmard06) > >> +{ > >> + if (dmard06->mode != DMARD06_MODE_POWERDOWN) > >> + dmard06_set_mode(dmard06, DMARD06_MODE_POWERDOWN); > >> +} > >> + > >> +static int dmard06_irq_open(struct input_dev *input) > >> +{ > >> + struct dmard06_data *dmard06 = input_get_drvdata(input); > >> + > >> + return dmard06_open(dmard06); > >> +} > >> + > >> +static void dmard06_irq_close(struct input_dev *input) > >> +{ > >> + struct dmard06_data *dmard06 = input_get_drvdata(input); > >> + > >> + dmard06_close(dmard06); > >> +} > >> + > >> +static void dmard06_poll_open(struct input_polled_dev *input_poll) > >> +{ > >> + struct dmard06_data *dmard06 = input_poll->private; > >> + > >> + dmard06_open(dmard06); > >> +} > >> + > >> +static void dmard06_poll_close(struct input_polled_dev *input_poll) > >> +{ > >> + struct dmard06_data *dmard06 = input_poll->private; > >> + > >> + dmard06_close(dmard06); > >> +} > >> + > >> +static int dmard06_read_chip_id(struct dmard06_data *dmard06) > >> +{ > >> + u8 buf; > >> + u8 chip_id; > >> + int error; > >> + > >> + error = dmard06_i2c_read(dmard06->client, DMARD06_CHIP_ID_REG, &buf); > >> + if (error) { > >> + dev_err(&dmard06->client->dev, "Failed to read chip id: %d\n", > >> + error); > >> + return error; > >> + } > >> + > >> + chip_id = (buf & 0x00ff); > >> + if (chip_id != DMARD06_CHIP_ID) { > >> + dev_err(&dmard06->client->dev, "Unknown chip id: %02x\n", > >> + chip_id); > >> + return -EINVAL; > >> + } > >> + > >> + dmard06->chip_id = chip_id; > >> + dev_info(&dmard06->client->dev, "Found DMARD%02x chip\n", chip_id); > >> + > >> + return 0; > >> +} > >> + > >> +static void dmard06_report_xyz(struct dmard06_data *dmard06) > >> +{ > >> + u8 axis[DMARD06_XYZ_DATA_SIZE]; > >> + bool reversed; > >> + int xyz[3]; > >> + int error; > >> + int i; > >> + > >> + error = i2c_smbus_read_i2c_block_data(dmard06->client, > >> + DMARD06_XOUT_REG, > >> + DMARD06_XYZ_DATA_SIZE, axis); > >> + if (error != DMARD06_XYZ_DATA_SIZE) > >> + return; > >> + > >> + for (i = 0; i < DMARD06_XYZ_DATA_SIZE; i++) { > >> + reversed = (axis[i] >> 7) & 1; > >> + xyz[i] = (int)((axis[i] & 0x7f) >> 1); > >> + if (reversed) > >> + xyz[i] = xyz[i] - dmard06->range; > >> + } > >> + > >> + input_report_abs(dmard06->input, ABS_X, xyz[0]); > >> + input_report_abs(dmard06->input, ABS_Y, xyz[1]); > >> + input_report_abs(dmard06->input, ABS_Z, xyz[2]); > >> + input_sync(dmard06->input); > >> +} > >> + > >> +static irqreturn_t dmard06_irq_handler(int irq, void *dev_id) > >> +{ > >> + struct dmard06_data *dmard06 = dev_id; > >> + > >> + dmard06_report_xyz(dmard06); > >> + > >> + return IRQ_HANDLED; > >> +} > >> + > >> +static void dmard06_poll(struct input_polled_dev *input_poll) > >> +{ > >> + dmard06_report_xyz(input_poll->private); > >> +} > >> + > >> +static void dmard06_init_input_device(struct dmard06_data *dmard06, > >> + struct input_dev *input) > >> +{ > >> + int range; > >> + > >> + input->name = "dmard06"; > >> + input->id.bustype = BUS_I2C; > >> + input->id.version = dmard06->chip_id; > >> + input->dev.parent = &dmard06->client->dev; > >> + > >> + set_bit(EV_ABS, input->evbit); > >> + > >> + range = DMARD06_MAX_VALUE; > >> + input_set_abs_params(input, ABS_X, -range, range, 0, 0); > >> + input_set_abs_params(input, ABS_Y, -range, range, 0, 0); > >> + input_set_abs_params(input, ABS_Z, -range, range, 0, 0); > >> + > >> + dmard06->range = range; > >> +} > >> + > >> +static int dmard06_request_input_device(struct dmard06_data *dmard06) > >> +{ > >> + struct input_dev *input; > >> + int error; > >> + > >> + input = devm_input_allocate_device(&dmard06->client->dev); > >> + if (!input) { > >> + dev_err(&dmard06->client->dev, > >> + "Failed to allocate input device\n"); > >> + return -ENOMEM; > >> + } > >> + > >> + dmard06_init_input_device(dmard06, input); > >> + > >> + input->open = dmard06_irq_open; > >> + input->close = dmard06_irq_close; > >> + input_set_drvdata(input, dmard06); > >> + > >> + error = input_register_device(input); > >> + if (error) { > >> + dev_err(&dmard06->client->dev, > >> + "Failed to register input device: %d", error); > >> + return error; > >> + } > >> + > >> + dmard06->input = input; > >> + > >> + return 0; > >> +} > >> + > >> +static int dmard06_request_polled_device(struct dmard06_data *dmard06) > >> +{ > >> + struct input_polled_dev *input_poll; > >> + int error; > >> + > >> + input_poll = devm_input_allocate_polled_device(&dmard06->client->dev); > >> + if (!input_poll) { > >> + dev_err(&dmard06->client->dev, > >> + "Failed to allocate polled input device\n"); > >> + return -ENOMEM; > >> + } > >> + > >> + input_poll->private = dmard06; > >> + input_poll->open = dmard06_poll_open; > >> + input_poll->close = dmard06_poll_close; > >> + input_poll->poll = dmard06_poll; > >> + input_poll->poll_interval = DMARD06_POLL_INTERVAL; > >> + input_poll->poll_interval_min = DMARD06_POLL_MIN; > >> + input_poll->poll_interval_max = DMARD06_POLL_MAX; > >> + > >> + dmard06_init_input_device(dmard06, input_poll->input); > >> + > >> + error = input_register_polled_device(input_poll); > >> + if (error) { > >> + dev_err(&dmard06->client->dev, > >> + "Failed to register polled device: %d", error); > >> + return error; > >> + } > >> + > >> + dmard06->input_poll = input_poll; > >> + dmard06->input = input_poll->input; > >> + > >> + return 0; > >> +} > >> + > >> +static int dmard06_probe(struct i2c_client *client, > >> + const struct i2c_device_id *id) > >> +{ > >> + struct dmard06_data *dmard06; > >> + int error; > >> + > >> + dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr); > >> + > >> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { > >> + dev_err(&client->dev, "I2C check functionality failed\n"); > >> + return -ENXIO; > >> + } > >> + > >> + dmard06 = devm_kzalloc(&client->dev, sizeof(*dmard06), GFP_KERNEL); > >> + if (!dmard06) > >> + return -ENOMEM; > >> + > >> + dmard06->client = client; > >> + i2c_set_clientdata(client, dmard06); > >> + > >> + error = dmard06_reset(dmard06->client); > >> + if (error) > >> + return error; > >> + > >> + error = dmard06_read_chip_id(dmard06); > >> + if (error) > >> + return error; > >> + > >> + error = dmard06_set_mode(dmard06, DMARD06_MODE_NORMAL); > >> + if (error) > >> + return error; > >> + > >> + if (dmard06->client->irq) { > >> + error = dmard06_init_irq(dmard06->client); > >> + if (error) > >> + return error; > >> + > >> + error = dmard06_request_input_device(dmard06); > >> + if (error) > >> + return error; > >> + > >> + dmard06->irq_flags = IRQ_TYPE_LEVEL_LOW | IRQF_ONESHOT; > >> + error = devm_request_threaded_irq(&dmard06->client->dev, > >> + dmard06->client->irq, NULL, > >> + dmard06_irq_handler, > >> + dmard06->irq_flags, > >> + dmard06->client->name, > >> + dmard06); > >> + if (error) { > >> + dev_err(&dmard06->client->dev, > >> + "Request IRQ failed: %d\n", error); > >> + return error; > >> + } > >> + > >> + } else { > >> + error = dmard06_request_polled_device(dmard06); > >> + if (error) > >> + return error; > >> + } > >> + > >> + return 0; > >> +} > >> + > >> +static const struct i2c_device_id dmard06_id[] = { > >> + { "dmard06", 0 }, > >> + { } > >> +}; > >> +MODULE_DEVICE_TABLE(i2c, dmard06_id); > >> + > >> +static const struct of_device_id dmard06_of_match[] = { > >> + { .compatible = "domintech,dmard06" }, > >> + { } > >> +}; > >> +MODULE_DEVICE_TABLE(of, dmard06_of_match); > >> + > >> +static struct i2c_driver dmard06_driver = { > >> + .probe = dmard06_probe, > >> + .class = I2C_CLASS_HWMON, > >> + .id_table = dmard06_id, > >> + .driver = { > >> + .name = "dmard06", > >> + .of_match_table = of_match_ptr(dmard06_of_match), > >> + }, > >> +}; > >> +module_i2c_driver(dmard06_driver); > >> + > >> +MODULE_AUTHOR("Aleksei Mamlin <mamlinav@gmail.com>"); > >> +MODULE_DESCRIPTION("Domintech DMARD06 accelerometer driver"); > >> +MODULE_LICENSE("GPL v2"); > >> -- > >> 2.7.3 > >> > > > -- Thanks and regards, Aleksei Mamlin ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 0/2] Add driver for Domintech DMARD06 accelerometer @ 2016-07-21 20:32 ` Aleksei Mamlin 0 siblings, 0 replies; 23+ messages in thread From: Aleksei Mamlin @ 2016-07-21 20:32 UTC (permalink / raw) To: Jonathan Cameron Cc: Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler, Rob Herring, devicetree, linux-kernel, linux-iio, Aleksei Mamlin This patch series adds driver for Domintech DMARD06 low-g tri-axial digital accelerometer and vendor prefix for Domintech Co., Ltd. Changes since v1: - Rewrite driver to iio subsystem Aleksei Mamlin (2): devicetree: bindings: Add vendor prefix for Domintech Co., Ltd. iio: accel: Add support for Domintech DMARD06 accelerometer .../devicetree/bindings/iio/accel/dmard06.txt | 17 ++ .../devicetree/bindings/vendor-prefixes.txt | 1 + drivers/iio/accel/Kconfig | 11 ++ drivers/iio/accel/Makefile | 1 + drivers/iio/accel/dmard06.c | 219 +++++++++++++++++++++ 5 files changed, 249 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/accel/dmard06.txt create mode 100644 drivers/iio/accel/dmard06.c -- 2.7.3 ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 0/2] Add driver for Domintech DMARD06 accelerometer @ 2016-07-21 20:32 ` Aleksei Mamlin 0 siblings, 0 replies; 23+ messages in thread From: Aleksei Mamlin @ 2016-07-21 20:32 UTC (permalink / raw) To: Jonathan Cameron Cc: Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler, Rob Herring, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-iio-u79uwXL29TY76Z2rM5mHXA, Aleksei Mamlin This patch series adds driver for Domintech DMARD06 low-g tri-axial digital accelerometer and vendor prefix for Domintech Co., Ltd. Changes since v1: - Rewrite driver to iio subsystem Aleksei Mamlin (2): devicetree: bindings: Add vendor prefix for Domintech Co., Ltd. iio: accel: Add support for Domintech DMARD06 accelerometer .../devicetree/bindings/iio/accel/dmard06.txt | 17 ++ .../devicetree/bindings/vendor-prefixes.txt | 1 + drivers/iio/accel/Kconfig | 11 ++ drivers/iio/accel/Makefile | 1 + drivers/iio/accel/dmard06.c | 219 +++++++++++++++++++++ 5 files changed, 249 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/accel/dmard06.txt create mode 100644 drivers/iio/accel/dmard06.c -- 2.7.3 ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 1/2] devicetree: bindings: Add vendor prefix for Domintech Co., Ltd. @ 2016-07-21 20:32 ` Aleksei Mamlin 0 siblings, 0 replies; 23+ messages in thread From: Aleksei Mamlin @ 2016-07-21 20:32 UTC (permalink / raw) To: Jonathan Cameron Cc: Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler, Rob Herring, devicetree, linux-kernel, linux-iio, Aleksei Mamlin Add vendor-prefix for Domintech Co., Ltd. Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index d2bce22..0c12f2d 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -75,6 +75,7 @@ digilent Diglent, Inc. dlg Dialog Semiconductor dlink D-Link Corporation dmo Data Modul AG +domintech Domintech Co., Ltd. dptechnics DPTechnics dragino Dragino Technology Co., Limited ea Embedded Artists AB -- 2.7.3 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 1/2] devicetree: bindings: Add vendor prefix for Domintech Co., Ltd. @ 2016-07-21 20:32 ` Aleksei Mamlin 0 siblings, 0 replies; 23+ messages in thread From: Aleksei Mamlin @ 2016-07-21 20:32 UTC (permalink / raw) To: Jonathan Cameron Cc: Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler, Rob Herring, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-iio-u79uwXL29TY76Z2rM5mHXA, Aleksei Mamlin Add vendor-prefix for Domintech Co., Ltd. Signed-off-by: Aleksei Mamlin <mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index d2bce22..0c12f2d 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -75,6 +75,7 @@ digilent Diglent, Inc. dlg Dialog Semiconductor dlink D-Link Corporation dmo Data Modul AG +domintech Domintech Co., Ltd. dptechnics DPTechnics dragino Dragino Technology Co., Limited ea Embedded Artists AB -- 2.7.3 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* Re: [PATCH 1/2] devicetree: bindings: Add vendor prefix for Domintech Co., Ltd. @ 2016-07-21 22:16 ` Rob Herring 0 siblings, 0 replies; 23+ messages in thread From: Rob Herring @ 2016-07-21 22:16 UTC (permalink / raw) To: Aleksei Mamlin Cc: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler, devicetree, linux-kernel, linux-iio On Thu, Jul 21, 2016 at 11:32:58PM +0300, Aleksei Mamlin wrote: > Add vendor-prefix for Domintech Co., Ltd. > > Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> > --- > Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + > 1 file changed, 1 insertion(+) Please add acks when posting new versions. Rob ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 1/2] devicetree: bindings: Add vendor prefix for Domintech Co., Ltd. @ 2016-07-21 22:16 ` Rob Herring 0 siblings, 0 replies; 23+ messages in thread From: Rob Herring @ 2016-07-21 22:16 UTC (permalink / raw) To: Aleksei Mamlin Cc: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-iio-u79uwXL29TY76Z2rM5mHXA On Thu, Jul 21, 2016 at 11:32:58PM +0300, Aleksei Mamlin wrote: > Add vendor-prefix for Domintech Co., Ltd. > > Signed-off-by: Aleksei Mamlin <mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > --- > Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + > 1 file changed, 1 insertion(+) Please add acks when posting new versions. Rob ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 2/2] iio: accel: Add support for Domintech DMARD06 accelerometer 2016-07-21 20:32 ` Aleksei Mamlin (?) (?) @ 2016-07-21 20:33 ` Aleksei Mamlin 2016-07-21 22:19 ` Rob Herring 2016-07-21 22:41 ` Peter Meerwald-Stadler -1 siblings, 2 replies; 23+ messages in thread From: Aleksei Mamlin @ 2016-07-21 20:33 UTC (permalink / raw) To: Jonathan Cameron Cc: Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler, Rob Herring, devicetree, linux-kernel, linux-iio, Aleksei Mamlin This patch add support for Domintech DMARD06 accelerometer. Domintech DMARD06 is a low-g tri-axial digital accelerometer for cost-sensitive consumer application. Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> --- .../devicetree/bindings/iio/accel/dmard06.txt | 17 ++ drivers/iio/accel/Kconfig | 11 ++ drivers/iio/accel/Makefile | 1 + drivers/iio/accel/dmard06.c | 219 +++++++++++++++++++++ 4 files changed, 248 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/accel/dmard06.txt create mode 100644 drivers/iio/accel/dmard06.c diff --git a/Documentation/devicetree/bindings/iio/accel/dmard06.txt b/Documentation/devicetree/bindings/iio/accel/dmard06.txt new file mode 100644 index 0000000..cc2231a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/dmard06.txt @@ -0,0 +1,17 @@ +Device tree bindings for Domintech DMARD06 acceletometer + +Required properties: + - compatible : Should be "domintech,dmard06" + - reg : I2C address of the chip. Should be 0x1c + +Example: + &i2c1 { + /* ... */ + + accelerometer@1c { + compatible = "domintech,dmard06"; + reg = <0x1c>; + }; + + /* ... */ + }; diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index e4a758c..abc8536 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -40,6 +40,17 @@ config BMC150_ACCEL_SPI tristate select REGMAP_SPI +config DMARD06 + tristate "Domintech DMARD06 Digital Accelerometer Driver" + depends on OF || COMPILE_TEST + depends on I2C + help + Say yes here to build support for the Domintech DMARD06 low-g + tri-axial digital accelerometer connected via an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called dmard06. + config HID_SENSOR_ACCEL_3D depends on HID_SENSOR_HUB select IIO_BUFFER diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index 71b6794..a96b269 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_BMA180) += bma180.o obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o +obj-$(CONFIG_DMARD06) += dmard06.o obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o obj-$(CONFIG_KXSD9) += kxsd9.o diff --git a/drivers/iio/accel/dmard06.c b/drivers/iio/accel/dmard06.c new file mode 100644 index 0000000..433e430 --- /dev/null +++ b/drivers/iio/accel/dmard06.c @@ -0,0 +1,219 @@ +/* + * IIO driver for Domintech DMARD06 accelerometer + * + * Copyright (C) 2016 Aleksei Mamlin <mamlinav@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/iio/iio.h> + +struct dmard06_data { + struct i2c_client *client; +}; + +#define DMARD06_DRV_NAME "dmard06" + +/* Device data registers */ +#define DMARD06_CHIP_ID_REG 0x0f +#define DMARD06_TOUT_REG 0x40 +#define DMARD06_XOUT_REG 0x41 +#define DMARD06_YOUT_REG 0x42 +#define DMARD06_ZOUT_REG 0x43 + +/* Device ID value */ +#define DMARD06_CHIP_ID 0x06 + +/* Device values */ +#define DMARD06_AXIS_MAX_VAL 64 +#define DMARD06_AXIS_SCALE_VAL 31250 +#define DMARD06_TEMP_CENTER_VAL 25 + +static int dmard06_i2c_read(struct i2c_client *client, u8 reg, u8 *buf) +{ + int error; + + error = i2c_master_send(client, ®, 1); + if (unlikely(error < 0)) + return error; + + error = i2c_master_recv(client, buf, 1); + if (unlikely(error < 0)) + return error; + return 0; +} + +static int dmard06_read_chip_id(struct dmard06_data *dmard06) +{ + u8 buf; + u8 chip_id; + int error; + + error = dmard06_i2c_read(dmard06->client, DMARD06_CHIP_ID_REG, &buf); + if (error) { + dev_err(&dmard06->client->dev, "Failed to read chip id: %d\n", + error); + return error; + } + + chip_id = (buf & 0x00ff); + if (chip_id != DMARD06_CHIP_ID) { + dev_err(&dmard06->client->dev, "Invalid chip id: %02x\n", + chip_id); + return -EINVAL; + } + + dev_info(&dmard06->client->dev, "Found DMARD%02x chip\n", chip_id); + + return 0; +} + +static int dmard06_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct dmard06_data *dmard06 = iio_priv(indio_dev); + u8 buf; + bool reversed; + int error; + int tmp; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + error = dmard06_i2c_read(dmard06->client, chan->address, &buf); + if (error) { + dev_err(&dmard06->client->dev, + "Failed to read data %d\n", error); + return error; + } + + reversed = (buf >> 7) & 1; + tmp = (int)((buf & 0x7f) >> 1); + + switch (chan->type) { + case IIO_ACCEL: + *val = reversed ? (tmp - DMARD06_AXIS_MAX_VAL) : tmp; + return IIO_VAL_INT; + case IIO_TEMP: + *val = reversed ? -tmp : tmp; + return IIO_VAL_INT; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_OFFSET: + switch (chan->type) { + case IIO_TEMP: + *val = DMARD06_TEMP_CENTER_VAL; + return IIO_VAL_INT; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_ACCEL: + *val = 0; + *val2 = DMARD06_AXIS_SCALE_VAL; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static const struct iio_info dmard06_info = { + .driver_module = THIS_MODULE, + .read_raw = dmard06_read_raw, +}; + +#define DMARD06_ACCEL_CHANNEL(_axis, reg) { \ + .type = IIO_ACCEL, \ + .address = reg, \ + .channel2 = IIO_MOD_##_axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .modified = 1, \ +} + +#define DMARD06_TEMP_CHANNEL(reg) { \ + .type = IIO_TEMP, \ + .address = reg, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_OFFSET), \ +} + +static const struct iio_chan_spec dmard06_channels[] = { + DMARD06_ACCEL_CHANNEL(X, DMARD06_XOUT_REG), + DMARD06_ACCEL_CHANNEL(Y, DMARD06_YOUT_REG), + DMARD06_ACCEL_CHANNEL(Z, DMARD06_ZOUT_REG), + DMARD06_TEMP_CHANNEL(DMARD06_TOUT_REG), +}; + +static int dmard06_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int error; + struct iio_dev *indio_dev; + struct dmard06_data *dmard06; + + dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr); + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "I2C check functionality failed\n"); + return -ENXIO; + } + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dmard06)); + if (!indio_dev) { + dev_err(&client->dev, "Failed to allocate iio device\n"); + return -ENOMEM; + } + + dmard06 = iio_priv(indio_dev); + dmard06->client = client; + + error = dmard06_read_chip_id(dmard06); + if (error) + return error; + + i2c_set_clientdata(client, indio_dev); + indio_dev->dev.parent = &client->dev; + indio_dev->name = DMARD06_DRV_NAME; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = dmard06_channels; + indio_dev->num_channels = ARRAY_SIZE(dmard06_channels); + indio_dev->info = &dmard06_info; + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static const struct i2c_device_id dmard06_id[] = { + { "dmard06", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, dmard06_id); + +static const struct of_device_id dmard06_of_match[] = { + { .compatible = "domintech,dmard06" }, + { } +}; +MODULE_DEVICE_TABLE(of, dmard06_of_match); + +static struct i2c_driver dmard06_driver = { + .probe = dmard06_probe, + .id_table = dmard06_id, + .driver = { + .name = DMARD06_DRV_NAME, + .of_match_table = of_match_ptr(dmard06_of_match), + }, +}; +module_i2c_driver(dmard06_driver); + +MODULE_AUTHOR("Aleksei Mamlin <mamlinav@gmail.com>"); +MODULE_DESCRIPTION("Domintech DMARD06 accelerometer driver"); +MODULE_LICENSE("GPL v2"); -- 2.7.3 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* Re: [PATCH 2/2] iio: accel: Add support for Domintech DMARD06 accelerometer 2016-07-21 20:33 ` [PATCH 2/2] iio: accel: Add support for Domintech DMARD06 accelerometer Aleksei Mamlin @ 2016-07-21 22:19 ` Rob Herring 2016-07-21 22:41 ` Peter Meerwald-Stadler 1 sibling, 0 replies; 23+ messages in thread From: Rob Herring @ 2016-07-21 22:19 UTC (permalink / raw) To: Aleksei Mamlin Cc: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler, devicetree, linux-kernel, linux-iio On Thu, Jul 21, 2016 at 11:33:11PM +0300, Aleksei Mamlin wrote: > This patch add support for Domintech DMARD06 accelerometer. > > Domintech DMARD06 is a low-g tri-axial digital accelerometer for > cost-sensitive consumer application. > > Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> > --- > .../devicetree/bindings/iio/accel/dmard06.txt | 17 ++ > drivers/iio/accel/Kconfig | 11 ++ > drivers/iio/accel/Makefile | 1 + > drivers/iio/accel/dmard06.c | 219 +++++++++++++++++++++ > 4 files changed, 248 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/accel/dmard06.txt > create mode 100644 drivers/iio/accel/dmard06.c > > diff --git a/Documentation/devicetree/bindings/iio/accel/dmard06.txt b/Documentation/devicetree/bindings/iio/accel/dmard06.txt > new file mode 100644 > index 0000000..cc2231a > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/accel/dmard06.txt > @@ -0,0 +1,17 @@ > +Device tree bindings for Domintech DMARD06 acceletometer > + > +Required properties: > + - compatible : Should be "domintech,dmard06" > + - reg : I2C address of the chip. Should be 0x1c No interrupt? If not, for the binding: Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 2/2] iio: accel: Add support for Domintech DMARD06 accelerometer 2016-07-21 20:33 ` [PATCH 2/2] iio: accel: Add support for Domintech DMARD06 accelerometer Aleksei Mamlin 2016-07-21 22:19 ` Rob Herring @ 2016-07-21 22:41 ` Peter Meerwald-Stadler 2016-07-23 7:26 ` Jonathan Cameron 2016-07-23 21:49 ` Aleksei Mamlin 1 sibling, 2 replies; 23+ messages in thread From: Peter Meerwald-Stadler @ 2016-07-21 22:41 UTC (permalink / raw) To: Aleksei Mamlin Cc: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen, Rob Herring, devicetree, linux-kernel, linux-iio > This patch add support for Domintech DMARD06 accelerometer. comments below > Domintech DMARD06 is a low-g tri-axial digital accelerometer for > cost-sensitive consumer application. > > Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> > --- > .../devicetree/bindings/iio/accel/dmard06.txt | 17 ++ > drivers/iio/accel/Kconfig | 11 ++ > drivers/iio/accel/Makefile | 1 + > drivers/iio/accel/dmard06.c | 219 +++++++++++++++++++++ > 4 files changed, 248 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/accel/dmard06.txt > create mode 100644 drivers/iio/accel/dmard06.c > > diff --git a/Documentation/devicetree/bindings/iio/accel/dmard06.txt b/Documentation/devicetree/bindings/iio/accel/dmard06.txt > new file mode 100644 > index 0000000..cc2231a > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/accel/dmard06.txt > @@ -0,0 +1,17 @@ > +Device tree bindings for Domintech DMARD06 acceletometer typo: accelerometer > + > +Required properties: > + - compatible : Should be "domintech,dmard06" > + - reg : I2C address of the chip. Should be 0x1c > + > +Example: > + &i2c1 { > + /* ... */ > + > + accelerometer@1c { > + compatible = "domintech,dmard06"; > + reg = <0x1c>; > + }; > + > + /* ... */ > + }; > diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig > index e4a758c..abc8536 100644 > --- a/drivers/iio/accel/Kconfig > +++ b/drivers/iio/accel/Kconfig > @@ -40,6 +40,17 @@ config BMC150_ACCEL_SPI > tristate > select REGMAP_SPI > > +config DMARD06 > + tristate "Domintech DMARD06 Digital Accelerometer Driver" > + depends on OF || COMPILE_TEST > + depends on I2C > + help > + Say yes here to build support for the Domintech DMARD06 low-g > + tri-axial digital accelerometer connected via an I2C bus. > + > + To compile this driver as a module, choose M here: the > + module will be called dmard06. > + > config HID_SENSOR_ACCEL_3D > depends on HID_SENSOR_HUB > select IIO_BUFFER > diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile > index 71b6794..a96b269 100644 > --- a/drivers/iio/accel/Makefile > +++ b/drivers/iio/accel/Makefile > @@ -7,6 +7,7 @@ obj-$(CONFIG_BMA180) += bma180.o > obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o > obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o > obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o > +obj-$(CONFIG_DMARD06) += dmard06.o > obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o > obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o > obj-$(CONFIG_KXSD9) += kxsd9.o > diff --git a/drivers/iio/accel/dmard06.c b/drivers/iio/accel/dmard06.c > new file mode 100644 > index 0000000..433e430 > --- /dev/null > +++ b/drivers/iio/accel/dmard06.c > @@ -0,0 +1,219 @@ > +/* > + * IIO driver for Domintech DMARD06 accelerometer > + * > + * Copyright (C) 2016 Aleksei Mamlin <mamlinav@gmail.com> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + */ > + > +#include <linux/module.h> > +#include <linux/i2c.h> > +#include <linux/iio/iio.h> > + > +struct dmard06_data { > + struct i2c_client *client; > +}; > + > +#define DMARD06_DRV_NAME "dmard06" > + > +/* Device data registers */ > +#define DMARD06_CHIP_ID_REG 0x0f > +#define DMARD06_TOUT_REG 0x40 > +#define DMARD06_XOUT_REG 0x41 > +#define DMARD06_YOUT_REG 0x42 > +#define DMARD06_ZOUT_REG 0x43 > + > +/* Device ID value */ > +#define DMARD06_CHIP_ID 0x06 > + > +/* Device values */ > +#define DMARD06_AXIS_MAX_VAL 64 > +#define DMARD06_AXIS_SCALE_VAL 31250 > +#define DMARD06_TEMP_CENTER_VAL 25 > + > +static int dmard06_i2c_read(struct i2c_client *client, u8 reg, u8 *buf) > +{ > + int error; 'error' is a bit pessimistic, how about 'ret'? :-) > + can't use i2c_smbus_read_byte_data()? > + error = i2c_master_send(client, ®, 1); > + if (unlikely(error < 0)) > + return error; > + > + error = i2c_master_recv(client, buf, 1); > + if (unlikely(error < 0)) > + return error; not sure if it is worth to annotate unlikely() here -- i2c is slooow locking is needed if you really need two i2c_master calls > + return 0; > +} > + > +static int dmard06_read_chip_id(struct dmard06_data *dmard06) > +{ > + u8 buf; > + u8 chip_id; > + int error; > + > + error = dmard06_i2c_read(dmard06->client, DMARD06_CHIP_ID_REG, &buf); > + if (error) { > + dev_err(&dmard06->client->dev, "Failed to read chip id: %d\n", > + error); > + return error; > + } > + > + chip_id = (buf & 0x00ff); why? buf is u8 anyways > + if (chip_id != DMARD06_CHIP_ID) { > + dev_err(&dmard06->client->dev, "Invalid chip id: %02x\n", > + chip_id); > + return -EINVAL; often ENODEV is used for this case > + } > + > + dev_info(&dmard06->client->dev, "Found DMARD%02x chip\n", chip_id); we prefer silent probing of the driver, please don't clutter the log > + > + return 0; > +} > + > +static int dmard06_read_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int *val, int *val2, long mask) > +{ > + struct dmard06_data *dmard06 = iio_priv(indio_dev); > + u8 buf; > + bool reversed; > + int error; > + int tmp; > + > + switch (mask) { > + case IIO_CHAN_INFO_RAW: > + error = dmard06_i2c_read(dmard06->client, chan->address, &buf); > + if (error) { > + dev_err(&dmard06->client->dev, > + "Failed to read data %d\n", error); > + return error; > + } > + > + reversed = (buf >> 7) & 1; > + tmp = (int)((buf & 0x7f) >> 1); > + > + switch (chan->type) { > + case IIO_ACCEL: wouldn't sign_extend32(buf >> 1, 6) do the job? > + *val = reversed ? (tmp - DMARD06_AXIS_MAX_VAL) : tmp; > + return IIO_VAL_INT; > + case IIO_TEMP: > + *val = reversed ? -tmp : tmp; > + return IIO_VAL_INT; > + default: > + return -EINVAL; > + } > + case IIO_CHAN_INFO_OFFSET: > + switch (chan->type) { > + case IIO_TEMP: > + *val = DMARD06_TEMP_CENTER_VAL; > + return IIO_VAL_INT; > + default: > + return -EINVAL; > + } > + case IIO_CHAN_INFO_SCALE: > + switch (chan->type) { > + case IIO_ACCEL: > + *val = 0; > + *val2 = DMARD06_AXIS_SCALE_VAL; > + return IIO_VAL_INT_PLUS_MICRO; > + default: > + return -EINVAL; > + } > + default: > + return -EINVAL; > + } > +} > + > +static const struct iio_info dmard06_info = { > + .driver_module = THIS_MODULE, > + .read_raw = dmard06_read_raw, > +}; > + > +#define DMARD06_ACCEL_CHANNEL(_axis, reg) { \ maybe rename reg to _reg > + .type = IIO_ACCEL, \ > + .address = reg, \ > + .channel2 = IIO_MOD_##_axis, \ > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ > + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ > + .modified = 1, \ > +} > + > +#define DMARD06_TEMP_CHANNEL(reg) { \ > + .type = IIO_TEMP, \ > + .address = reg, \ > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ > + BIT(IIO_CHAN_INFO_OFFSET), \ > +} > + > +static const struct iio_chan_spec dmard06_channels[] = { > + DMARD06_ACCEL_CHANNEL(X, DMARD06_XOUT_REG), > + DMARD06_ACCEL_CHANNEL(Y, DMARD06_YOUT_REG), > + DMARD06_ACCEL_CHANNEL(Z, DMARD06_ZOUT_REG), > + DMARD06_TEMP_CHANNEL(DMARD06_TOUT_REG), > +}; > + > +static int dmard06_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + int error; > + struct iio_dev *indio_dev; > + struct dmard06_data *dmard06; > + > + dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr); not needed > + > + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { > + dev_err(&client->dev, "I2C check functionality failed\n"); > + return -ENXIO; > + } > + > + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dmard06)); > + if (!indio_dev) { > + dev_err(&client->dev, "Failed to allocate iio device\n"); > + return -ENOMEM; > + } > + > + dmard06 = iio_priv(indio_dev); > + dmard06->client = client; > + > + error = dmard06_read_chip_id(dmard06); > + if (error) > + return error; > + > + i2c_set_clientdata(client, indio_dev); > + indio_dev->dev.parent = &client->dev; > + indio_dev->name = DMARD06_DRV_NAME; > + indio_dev->modes = INDIO_DIRECT_MODE; > + indio_dev->channels = dmard06_channels; > + indio_dev->num_channels = ARRAY_SIZE(dmard06_channels); > + indio_dev->info = &dmard06_info; > + > + return devm_iio_device_register(&client->dev, indio_dev); > +} > + > +static const struct i2c_device_id dmard06_id[] = { > + { "dmard06", 0 }, > + { } > +}; > +MODULE_DEVICE_TABLE(i2c, dmard06_id); > + > +static const struct of_device_id dmard06_of_match[] = { > + { .compatible = "domintech,dmard06" }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, dmard06_of_match); > + > +static struct i2c_driver dmard06_driver = { > + .probe = dmard06_probe, > + .id_table = dmard06_id, > + .driver = { > + .name = DMARD06_DRV_NAME, > + .of_match_table = of_match_ptr(dmard06_of_match), > + }, > +}; > +module_i2c_driver(dmard06_driver); > + > +MODULE_AUTHOR("Aleksei Mamlin <mamlinav@gmail.com>"); > +MODULE_DESCRIPTION("Domintech DMARD06 accelerometer driver"); > +MODULE_LICENSE("GPL v2"); > -- Peter Meerwald-Stadler +43-664-2444418 (mobile) ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 2/2] iio: accel: Add support for Domintech DMARD06 accelerometer @ 2016-07-23 7:26 ` Jonathan Cameron 0 siblings, 0 replies; 23+ messages in thread From: Jonathan Cameron @ 2016-07-23 7:26 UTC (permalink / raw) To: Peter Meerwald-Stadler, Aleksei Mamlin Cc: Hartmut Knaack, Lars-Peter Clausen, Rob Herring, devicetree, linux-kernel, linux-iio On 22/07/16 00:41, Peter Meerwald-Stadler wrote: > >> This patch add support for Domintech DMARD06 accelerometer. > > comments below > >> Domintech DMARD06 is a low-g tri-axial digital accelerometer for >> cost-sensitive consumer application. >> >> Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> I don't have anything to add here. Nice fairly clean first version. >> --- >> .../devicetree/bindings/iio/accel/dmard06.txt | 17 ++ >> drivers/iio/accel/Kconfig | 11 ++ >> drivers/iio/accel/Makefile | 1 + >> drivers/iio/accel/dmard06.c | 219 +++++++++++++++++++++ >> 4 files changed, 248 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/iio/accel/dmard06.txt >> create mode 100644 drivers/iio/accel/dmard06.c >> >> diff --git a/Documentation/devicetree/bindings/iio/accel/dmard06.txt b/Documentation/devicetree/bindings/iio/accel/dmard06.txt >> new file mode 100644 >> index 0000000..cc2231a >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/iio/accel/dmard06.txt >> @@ -0,0 +1,17 @@ >> +Device tree bindings for Domintech DMARD06 acceletometer > > typo: accelerometer > >> + >> +Required properties: >> + - compatible : Should be "domintech,dmard06" >> + - reg : I2C address of the chip. Should be 0x1c >> + >> +Example: >> + &i2c1 { >> + /* ... */ >> + >> + accelerometer@1c { >> + compatible = "domintech,dmard06"; >> + reg = <0x1c>; >> + }; >> + >> + /* ... */ >> + }; >> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig >> index e4a758c..abc8536 100644 >> --- a/drivers/iio/accel/Kconfig >> +++ b/drivers/iio/accel/Kconfig >> @@ -40,6 +40,17 @@ config BMC150_ACCEL_SPI >> tristate >> select REGMAP_SPI >> >> +config DMARD06 >> + tristate "Domintech DMARD06 Digital Accelerometer Driver" >> + depends on OF || COMPILE_TEST >> + depends on I2C >> + help >> + Say yes here to build support for the Domintech DMARD06 low-g >> + tri-axial digital accelerometer connected via an I2C bus. >> + >> + To compile this driver as a module, choose M here: the >> + module will be called dmard06. >> + >> config HID_SENSOR_ACCEL_3D >> depends on HID_SENSOR_HUB >> select IIO_BUFFER >> diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile >> index 71b6794..a96b269 100644 >> --- a/drivers/iio/accel/Makefile >> +++ b/drivers/iio/accel/Makefile >> @@ -7,6 +7,7 @@ obj-$(CONFIG_BMA180) += bma180.o >> obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o >> obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o >> obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o >> +obj-$(CONFIG_DMARD06) += dmard06.o >> obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o >> obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o >> obj-$(CONFIG_KXSD9) += kxsd9.o >> diff --git a/drivers/iio/accel/dmard06.c b/drivers/iio/accel/dmard06.c >> new file mode 100644 >> index 0000000..433e430 >> --- /dev/null >> +++ b/drivers/iio/accel/dmard06.c >> @@ -0,0 +1,219 @@ >> +/* >> + * IIO driver for Domintech DMARD06 accelerometer >> + * >> + * Copyright (C) 2016 Aleksei Mamlin <mamlinav@gmail.com> >> + * >> + * This program is free software; you can redistribute it and/or modify it >> + * under the terms and conditions of the GNU General Public License, >> + * version 2, as published by the Free Software Foundation. >> + */ >> + >> +#include <linux/module.h> >> +#include <linux/i2c.h> >> +#include <linux/iio/iio.h> >> + >> +struct dmard06_data { >> + struct i2c_client *client; >> +}; >> + >> +#define DMARD06_DRV_NAME "dmard06" >> + >> +/* Device data registers */ >> +#define DMARD06_CHIP_ID_REG 0x0f >> +#define DMARD06_TOUT_REG 0x40 >> +#define DMARD06_XOUT_REG 0x41 >> +#define DMARD06_YOUT_REG 0x42 >> +#define DMARD06_ZOUT_REG 0x43 >> + >> +/* Device ID value */ >> +#define DMARD06_CHIP_ID 0x06 >> + >> +/* Device values */ >> +#define DMARD06_AXIS_MAX_VAL 64 >> +#define DMARD06_AXIS_SCALE_VAL 31250 >> +#define DMARD06_TEMP_CENTER_VAL 25 >> + >> +static int dmard06_i2c_read(struct i2c_client *client, u8 reg, u8 *buf) >> +{ >> + int error; > > 'error' is a bit pessimistic, how about 'ret'? :-) > >> + > > can't use i2c_smbus_read_byte_data()? > >> + error = i2c_master_send(client, ®, 1); >> + if (unlikely(error < 0)) >> + return error; >> + >> + error = i2c_master_recv(client, buf, 1); >> + if (unlikely(error < 0)) >> + return error; > > not sure if it is worth to annotate unlikely() here -- i2c is slooow > locking is needed if you really need two i2c_master calls > >> + return 0; >> +} >> + >> +static int dmard06_read_chip_id(struct dmard06_data *dmard06) >> +{ >> + u8 buf; >> + u8 chip_id; >> + int error; >> + >> + error = dmard06_i2c_read(dmard06->client, DMARD06_CHIP_ID_REG, &buf); >> + if (error) { >> + dev_err(&dmard06->client->dev, "Failed to read chip id: %d\n", >> + error); >> + return error; >> + } >> + >> + chip_id = (buf & 0x00ff); > > why? buf is u8 anyways > >> + if (chip_id != DMARD06_CHIP_ID) { >> + dev_err(&dmard06->client->dev, "Invalid chip id: %02x\n", >> + chip_id); >> + return -EINVAL; > > often ENODEV is used for this case > >> + } >> + >> + dev_info(&dmard06->client->dev, "Found DMARD%02x chip\n", chip_id); > > we prefer silent probing of the driver, please don't clutter the log > >> + >> + return 0; >> +} >> + >> +static int dmard06_read_raw(struct iio_dev *indio_dev, >> + struct iio_chan_spec const *chan, >> + int *val, int *val2, long mask) >> +{ >> + struct dmard06_data *dmard06 = iio_priv(indio_dev); >> + u8 buf; >> + bool reversed; >> + int error; >> + int tmp; >> + >> + switch (mask) { >> + case IIO_CHAN_INFO_RAW: >> + error = dmard06_i2c_read(dmard06->client, chan->address, &buf); >> + if (error) { >> + dev_err(&dmard06->client->dev, >> + "Failed to read data %d\n", error); >> + return error; >> + } >> + >> + reversed = (buf >> 7) & 1; >> + tmp = (int)((buf & 0x7f) >> 1); > > >> + >> + switch (chan->type) { >> + case IIO_ACCEL: > > wouldn't sign_extend32(buf >> 1, 6) do the job? > >> + *val = reversed ? (tmp - DMARD06_AXIS_MAX_VAL) : tmp; >> + return IIO_VAL_INT; >> + case IIO_TEMP: >> + *val = reversed ? -tmp : tmp; >> + return IIO_VAL_INT; >> + default: >> + return -EINVAL; >> + } >> + case IIO_CHAN_INFO_OFFSET: >> + switch (chan->type) { >> + case IIO_TEMP: >> + *val = DMARD06_TEMP_CENTER_VAL; >> + return IIO_VAL_INT; >> + default: >> + return -EINVAL; >> + } >> + case IIO_CHAN_INFO_SCALE: >> + switch (chan->type) { >> + case IIO_ACCEL: >> + *val = 0; >> + *val2 = DMARD06_AXIS_SCALE_VAL; >> + return IIO_VAL_INT_PLUS_MICRO; >> + default: >> + return -EINVAL; >> + } >> + default: >> + return -EINVAL; >> + } >> +} >> + >> +static const struct iio_info dmard06_info = { >> + .driver_module = THIS_MODULE, >> + .read_raw = dmard06_read_raw, >> +}; >> + >> +#define DMARD06_ACCEL_CHANNEL(_axis, reg) { \ > > maybe rename reg to _reg > >> + .type = IIO_ACCEL, \ >> + .address = reg, \ >> + .channel2 = IIO_MOD_##_axis, \ >> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ >> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ >> + .modified = 1, \ >> +} >> + >> +#define DMARD06_TEMP_CHANNEL(reg) { \ >> + .type = IIO_TEMP, \ >> + .address = reg, \ >> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ >> + BIT(IIO_CHAN_INFO_OFFSET), \ >> +} >> + >> +static const struct iio_chan_spec dmard06_channels[] = { >> + DMARD06_ACCEL_CHANNEL(X, DMARD06_XOUT_REG), >> + DMARD06_ACCEL_CHANNEL(Y, DMARD06_YOUT_REG), >> + DMARD06_ACCEL_CHANNEL(Z, DMARD06_ZOUT_REG), >> + DMARD06_TEMP_CHANNEL(DMARD06_TOUT_REG), >> +}; >> + >> +static int dmard06_probe(struct i2c_client *client, >> + const struct i2c_device_id *id) >> +{ >> + int error; >> + struct iio_dev *indio_dev; >> + struct dmard06_data *dmard06; >> + >> + dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr); > > not needed > >> + >> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { >> + dev_err(&client->dev, "I2C check functionality failed\n"); >> + return -ENXIO; >> + } >> + >> + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dmard06)); >> + if (!indio_dev) { >> + dev_err(&client->dev, "Failed to allocate iio device\n"); >> + return -ENOMEM; >> + } >> + >> + dmard06 = iio_priv(indio_dev); >> + dmard06->client = client; >> + >> + error = dmard06_read_chip_id(dmard06); >> + if (error) >> + return error; >> + >> + i2c_set_clientdata(client, indio_dev); >> + indio_dev->dev.parent = &client->dev; >> + indio_dev->name = DMARD06_DRV_NAME; >> + indio_dev->modes = INDIO_DIRECT_MODE; >> + indio_dev->channels = dmard06_channels; >> + indio_dev->num_channels = ARRAY_SIZE(dmard06_channels); >> + indio_dev->info = &dmard06_info; >> + >> + return devm_iio_device_register(&client->dev, indio_dev); >> +} >> + >> +static const struct i2c_device_id dmard06_id[] = { >> + { "dmard06", 0 }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(i2c, dmard06_id); >> + >> +static const struct of_device_id dmard06_of_match[] = { >> + { .compatible = "domintech,dmard06" }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(of, dmard06_of_match); >> + >> +static struct i2c_driver dmard06_driver = { >> + .probe = dmard06_probe, >> + .id_table = dmard06_id, >> + .driver = { >> + .name = DMARD06_DRV_NAME, >> + .of_match_table = of_match_ptr(dmard06_of_match), >> + }, >> +}; >> +module_i2c_driver(dmard06_driver); >> + >> +MODULE_AUTHOR("Aleksei Mamlin <mamlinav@gmail.com>"); >> +MODULE_DESCRIPTION("Domintech DMARD06 accelerometer driver"); >> +MODULE_LICENSE("GPL v2"); >> > ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 2/2] iio: accel: Add support for Domintech DMARD06 accelerometer @ 2016-07-23 7:26 ` Jonathan Cameron 0 siblings, 0 replies; 23+ messages in thread From: Jonathan Cameron @ 2016-07-23 7:26 UTC (permalink / raw) To: Peter Meerwald-Stadler, Aleksei Mamlin Cc: Hartmut Knaack, Lars-Peter Clausen, Rob Herring, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-iio-u79uwXL29TY76Z2rM5mHXA On 22/07/16 00:41, Peter Meerwald-Stadler wrote: > >> This patch add support for Domintech DMARD06 accelerometer. > > comments below > >> Domintech DMARD06 is a low-g tri-axial digital accelerometer for >> cost-sensitive consumer application. >> >> Signed-off-by: Aleksei Mamlin <mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> I don't have anything to add here. Nice fairly clean first version. >> --- >> .../devicetree/bindings/iio/accel/dmard06.txt | 17 ++ >> drivers/iio/accel/Kconfig | 11 ++ >> drivers/iio/accel/Makefile | 1 + >> drivers/iio/accel/dmard06.c | 219 +++++++++++++++++++++ >> 4 files changed, 248 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/iio/accel/dmard06.txt >> create mode 100644 drivers/iio/accel/dmard06.c >> >> diff --git a/Documentation/devicetree/bindings/iio/accel/dmard06.txt b/Documentation/devicetree/bindings/iio/accel/dmard06.txt >> new file mode 100644 >> index 0000000..cc2231a >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/iio/accel/dmard06.txt >> @@ -0,0 +1,17 @@ >> +Device tree bindings for Domintech DMARD06 acceletometer > > typo: accelerometer > >> + >> +Required properties: >> + - compatible : Should be "domintech,dmard06" >> + - reg : I2C address of the chip. Should be 0x1c >> + >> +Example: >> + &i2c1 { >> + /* ... */ >> + >> + accelerometer@1c { >> + compatible = "domintech,dmard06"; >> + reg = <0x1c>; >> + }; >> + >> + /* ... */ >> + }; >> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig >> index e4a758c..abc8536 100644 >> --- a/drivers/iio/accel/Kconfig >> +++ b/drivers/iio/accel/Kconfig >> @@ -40,6 +40,17 @@ config BMC150_ACCEL_SPI >> tristate >> select REGMAP_SPI >> >> +config DMARD06 >> + tristate "Domintech DMARD06 Digital Accelerometer Driver" >> + depends on OF || COMPILE_TEST >> + depends on I2C >> + help >> + Say yes here to build support for the Domintech DMARD06 low-g >> + tri-axial digital accelerometer connected via an I2C bus. >> + >> + To compile this driver as a module, choose M here: the >> + module will be called dmard06. >> + >> config HID_SENSOR_ACCEL_3D >> depends on HID_SENSOR_HUB >> select IIO_BUFFER >> diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile >> index 71b6794..a96b269 100644 >> --- a/drivers/iio/accel/Makefile >> +++ b/drivers/iio/accel/Makefile >> @@ -7,6 +7,7 @@ obj-$(CONFIG_BMA180) += bma180.o >> obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o >> obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o >> obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o >> +obj-$(CONFIG_DMARD06) += dmard06.o >> obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o >> obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o >> obj-$(CONFIG_KXSD9) += kxsd9.o >> diff --git a/drivers/iio/accel/dmard06.c b/drivers/iio/accel/dmard06.c >> new file mode 100644 >> index 0000000..433e430 >> --- /dev/null >> +++ b/drivers/iio/accel/dmard06.c >> @@ -0,0 +1,219 @@ >> +/* >> + * IIO driver for Domintech DMARD06 accelerometer >> + * >> + * Copyright (C) 2016 Aleksei Mamlin <mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> >> + * >> + * This program is free software; you can redistribute it and/or modify it >> + * under the terms and conditions of the GNU General Public License, >> + * version 2, as published by the Free Software Foundation. >> + */ >> + >> +#include <linux/module.h> >> +#include <linux/i2c.h> >> +#include <linux/iio/iio.h> >> + >> +struct dmard06_data { >> + struct i2c_client *client; >> +}; >> + >> +#define DMARD06_DRV_NAME "dmard06" >> + >> +/* Device data registers */ >> +#define DMARD06_CHIP_ID_REG 0x0f >> +#define DMARD06_TOUT_REG 0x40 >> +#define DMARD06_XOUT_REG 0x41 >> +#define DMARD06_YOUT_REG 0x42 >> +#define DMARD06_ZOUT_REG 0x43 >> + >> +/* Device ID value */ >> +#define DMARD06_CHIP_ID 0x06 >> + >> +/* Device values */ >> +#define DMARD06_AXIS_MAX_VAL 64 >> +#define DMARD06_AXIS_SCALE_VAL 31250 >> +#define DMARD06_TEMP_CENTER_VAL 25 >> + >> +static int dmard06_i2c_read(struct i2c_client *client, u8 reg, u8 *buf) >> +{ >> + int error; > > 'error' is a bit pessimistic, how about 'ret'? :-) > >> + > > can't use i2c_smbus_read_byte_data()? > >> + error = i2c_master_send(client, ®, 1); >> + if (unlikely(error < 0)) >> + return error; >> + >> + error = i2c_master_recv(client, buf, 1); >> + if (unlikely(error < 0)) >> + return error; > > not sure if it is worth to annotate unlikely() here -- i2c is slooow > locking is needed if you really need two i2c_master calls > >> + return 0; >> +} >> + >> +static int dmard06_read_chip_id(struct dmard06_data *dmard06) >> +{ >> + u8 buf; >> + u8 chip_id; >> + int error; >> + >> + error = dmard06_i2c_read(dmard06->client, DMARD06_CHIP_ID_REG, &buf); >> + if (error) { >> + dev_err(&dmard06->client->dev, "Failed to read chip id: %d\n", >> + error); >> + return error; >> + } >> + >> + chip_id = (buf & 0x00ff); > > why? buf is u8 anyways > >> + if (chip_id != DMARD06_CHIP_ID) { >> + dev_err(&dmard06->client->dev, "Invalid chip id: %02x\n", >> + chip_id); >> + return -EINVAL; > > often ENODEV is used for this case > >> + } >> + >> + dev_info(&dmard06->client->dev, "Found DMARD%02x chip\n", chip_id); > > we prefer silent probing of the driver, please don't clutter the log > >> + >> + return 0; >> +} >> + >> +static int dmard06_read_raw(struct iio_dev *indio_dev, >> + struct iio_chan_spec const *chan, >> + int *val, int *val2, long mask) >> +{ >> + struct dmard06_data *dmard06 = iio_priv(indio_dev); >> + u8 buf; >> + bool reversed; >> + int error; >> + int tmp; >> + >> + switch (mask) { >> + case IIO_CHAN_INFO_RAW: >> + error = dmard06_i2c_read(dmard06->client, chan->address, &buf); >> + if (error) { >> + dev_err(&dmard06->client->dev, >> + "Failed to read data %d\n", error); >> + return error; >> + } >> + >> + reversed = (buf >> 7) & 1; >> + tmp = (int)((buf & 0x7f) >> 1); > > >> + >> + switch (chan->type) { >> + case IIO_ACCEL: > > wouldn't sign_extend32(buf >> 1, 6) do the job? > >> + *val = reversed ? (tmp - DMARD06_AXIS_MAX_VAL) : tmp; >> + return IIO_VAL_INT; >> + case IIO_TEMP: >> + *val = reversed ? -tmp : tmp; >> + return IIO_VAL_INT; >> + default: >> + return -EINVAL; >> + } >> + case IIO_CHAN_INFO_OFFSET: >> + switch (chan->type) { >> + case IIO_TEMP: >> + *val = DMARD06_TEMP_CENTER_VAL; >> + return IIO_VAL_INT; >> + default: >> + return -EINVAL; >> + } >> + case IIO_CHAN_INFO_SCALE: >> + switch (chan->type) { >> + case IIO_ACCEL: >> + *val = 0; >> + *val2 = DMARD06_AXIS_SCALE_VAL; >> + return IIO_VAL_INT_PLUS_MICRO; >> + default: >> + return -EINVAL; >> + } >> + default: >> + return -EINVAL; >> + } >> +} >> + >> +static const struct iio_info dmard06_info = { >> + .driver_module = THIS_MODULE, >> + .read_raw = dmard06_read_raw, >> +}; >> + >> +#define DMARD06_ACCEL_CHANNEL(_axis, reg) { \ > > maybe rename reg to _reg > >> + .type = IIO_ACCEL, \ >> + .address = reg, \ >> + .channel2 = IIO_MOD_##_axis, \ >> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ >> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ >> + .modified = 1, \ >> +} >> + >> +#define DMARD06_TEMP_CHANNEL(reg) { \ >> + .type = IIO_TEMP, \ >> + .address = reg, \ >> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ >> + BIT(IIO_CHAN_INFO_OFFSET), \ >> +} >> + >> +static const struct iio_chan_spec dmard06_channels[] = { >> + DMARD06_ACCEL_CHANNEL(X, DMARD06_XOUT_REG), >> + DMARD06_ACCEL_CHANNEL(Y, DMARD06_YOUT_REG), >> + DMARD06_ACCEL_CHANNEL(Z, DMARD06_ZOUT_REG), >> + DMARD06_TEMP_CHANNEL(DMARD06_TOUT_REG), >> +}; >> + >> +static int dmard06_probe(struct i2c_client *client, >> + const struct i2c_device_id *id) >> +{ >> + int error; >> + struct iio_dev *indio_dev; >> + struct dmard06_data *dmard06; >> + >> + dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr); > > not needed > >> + >> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { >> + dev_err(&client->dev, "I2C check functionality failed\n"); >> + return -ENXIO; >> + } >> + >> + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dmard06)); >> + if (!indio_dev) { >> + dev_err(&client->dev, "Failed to allocate iio device\n"); >> + return -ENOMEM; >> + } >> + >> + dmard06 = iio_priv(indio_dev); >> + dmard06->client = client; >> + >> + error = dmard06_read_chip_id(dmard06); >> + if (error) >> + return error; >> + >> + i2c_set_clientdata(client, indio_dev); >> + indio_dev->dev.parent = &client->dev; >> + indio_dev->name = DMARD06_DRV_NAME; >> + indio_dev->modes = INDIO_DIRECT_MODE; >> + indio_dev->channels = dmard06_channels; >> + indio_dev->num_channels = ARRAY_SIZE(dmard06_channels); >> + indio_dev->info = &dmard06_info; >> + >> + return devm_iio_device_register(&client->dev, indio_dev); >> +} >> + >> +static const struct i2c_device_id dmard06_id[] = { >> + { "dmard06", 0 }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(i2c, dmard06_id); >> + >> +static const struct of_device_id dmard06_of_match[] = { >> + { .compatible = "domintech,dmard06" }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(of, dmard06_of_match); >> + >> +static struct i2c_driver dmard06_driver = { >> + .probe = dmard06_probe, >> + .id_table = dmard06_id, >> + .driver = { >> + .name = DMARD06_DRV_NAME, >> + .of_match_table = of_match_ptr(dmard06_of_match), >> + }, >> +}; >> +module_i2c_driver(dmard06_driver); >> + >> +MODULE_AUTHOR("Aleksei Mamlin <mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>"); >> +MODULE_DESCRIPTION("Domintech DMARD06 accelerometer driver"); >> +MODULE_LICENSE("GPL v2"); >> > ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 2/2] iio: accel: Add support for Domintech DMARD06 accelerometer 2016-07-23 7:26 ` Jonathan Cameron (?) @ 2016-07-25 7:50 ` Aleksei Mamlin 2016-07-25 8:36 ` Peter Meerwald-Stadler -1 siblings, 1 reply; 23+ messages in thread From: Aleksei Mamlin @ 2016-07-25 7:50 UTC (permalink / raw) To: Jonathan Cameron Cc: Peter Meerwald-Stadler, Hartmut Knaack, Lars-Peter Clausen, Rob Herring, devicetree, linux-kernel, linux-iio On Sat, 23 Jul 2016 09:26:39 +0200 Jonathan Cameron <jic23@kernel.org> wrote: > On 22/07/16 00:41, Peter Meerwald-Stadler wrote: > > > >> This patch add support for Domintech DMARD06 accelerometer. > > > > comments below > > > >> Domintech DMARD06 is a low-g tri-axial digital accelerometer for > >> cost-sensitive consumer application. > >> > >> Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> > I don't have anything to add here. Nice fairly clean first version. Jonathan, I found that dmard05, dmard06 and dmard07 chips are very similar and have the same registers. There is not so many difference between chips, dmard05 and dmard07 have 8 bit adc and dmard06 only 7 bit adc. I want to add support of those chips in driver, but there is the question: should driver be renamed to something like dmard050607 or just dmard05 as first chip in this series? > >> --- > >> .../devicetree/bindings/iio/accel/dmard06.txt | 17 ++ > >> drivers/iio/accel/Kconfig | 11 ++ > >> drivers/iio/accel/Makefile | 1 + > >> drivers/iio/accel/dmard06.c | 219 +++++++++++++++++++++ > >> 4 files changed, 248 insertions(+) > >> create mode 100644 Documentation/devicetree/bindings/iio/accel/dmard06.txt > >> create mode 100644 drivers/iio/accel/dmard06.c > >> > >> diff --git a/Documentation/devicetree/bindings/iio/accel/dmard06.txt b/Documentation/devicetree/bindings/iio/accel/dmard06.txt > >> new file mode 100644 > >> index 0000000..cc2231a > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/iio/accel/dmard06.txt > >> @@ -0,0 +1,17 @@ > >> +Device tree bindings for Domintech DMARD06 acceletometer > > > > typo: accelerometer > > > >> + > >> +Required properties: > >> + - compatible : Should be "domintech,dmard06" > >> + - reg : I2C address of the chip. Should be 0x1c > >> + > >> +Example: > >> + &i2c1 { > >> + /* ... */ > >> + > >> + accelerometer@1c { > >> + compatible = "domintech,dmard06"; > >> + reg = <0x1c>; > >> + }; > >> + > >> + /* ... */ > >> + }; > >> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig > >> index e4a758c..abc8536 100644 > >> --- a/drivers/iio/accel/Kconfig > >> +++ b/drivers/iio/accel/Kconfig > >> @@ -40,6 +40,17 @@ config BMC150_ACCEL_SPI > >> tristate > >> select REGMAP_SPI > >> > >> +config DMARD06 > >> + tristate "Domintech DMARD06 Digital Accelerometer Driver" > >> + depends on OF || COMPILE_TEST > >> + depends on I2C > >> + help > >> + Say yes here to build support for the Domintech DMARD06 low-g > >> + tri-axial digital accelerometer connected via an I2C bus. > >> + > >> + To compile this driver as a module, choose M here: the > >> + module will be called dmard06. > >> + > >> config HID_SENSOR_ACCEL_3D > >> depends on HID_SENSOR_HUB > >> select IIO_BUFFER > >> diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile > >> index 71b6794..a96b269 100644 > >> --- a/drivers/iio/accel/Makefile > >> +++ b/drivers/iio/accel/Makefile > >> @@ -7,6 +7,7 @@ obj-$(CONFIG_BMA180) += bma180.o > >> obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o > >> obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o > >> obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o > >> +obj-$(CONFIG_DMARD06) += dmard06.o > >> obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o > >> obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o > >> obj-$(CONFIG_KXSD9) += kxsd9.o > >> diff --git a/drivers/iio/accel/dmard06.c b/drivers/iio/accel/dmard06.c > >> new file mode 100644 > >> index 0000000..433e430 > >> --- /dev/null > >> +++ b/drivers/iio/accel/dmard06.c > >> @@ -0,0 +1,219 @@ > >> +/* > >> + * IIO driver for Domintech DMARD06 accelerometer > >> + * > >> + * Copyright (C) 2016 Aleksei Mamlin <mamlinav@gmail.com> > >> + * > >> + * This program is free software; you can redistribute it and/or modify it > >> + * under the terms and conditions of the GNU General Public License, > >> + * version 2, as published by the Free Software Foundation. > >> + */ > >> + > >> +#include <linux/module.h> > >> +#include <linux/i2c.h> > >> +#include <linux/iio/iio.h> > >> + > >> +struct dmard06_data { > >> + struct i2c_client *client; > >> +}; > >> + > >> +#define DMARD06_DRV_NAME "dmard06" > >> + > >> +/* Device data registers */ > >> +#define DMARD06_CHIP_ID_REG 0x0f > >> +#define DMARD06_TOUT_REG 0x40 > >> +#define DMARD06_XOUT_REG 0x41 > >> +#define DMARD06_YOUT_REG 0x42 > >> +#define DMARD06_ZOUT_REG 0x43 > >> + > >> +/* Device ID value */ > >> +#define DMARD06_CHIP_ID 0x06 > >> + > >> +/* Device values */ > >> +#define DMARD06_AXIS_MAX_VAL 64 > >> +#define DMARD06_AXIS_SCALE_VAL 31250 > >> +#define DMARD06_TEMP_CENTER_VAL 25 > >> + > >> +static int dmard06_i2c_read(struct i2c_client *client, u8 reg, u8 *buf) > >> +{ > >> + int error; > > > > 'error' is a bit pessimistic, how about 'ret'? :-) > > > >> + > > > > can't use i2c_smbus_read_byte_data()? > > > >> + error = i2c_master_send(client, ®, 1); > >> + if (unlikely(error < 0)) > >> + return error; > >> + > >> + error = i2c_master_recv(client, buf, 1); > >> + if (unlikely(error < 0)) > >> + return error; > > > > not sure if it is worth to annotate unlikely() here -- i2c is slooow > > locking is needed if you really need two i2c_master calls > > > >> + return 0; > >> +} > >> + > >> +static int dmard06_read_chip_id(struct dmard06_data *dmard06) > >> +{ > >> + u8 buf; > >> + u8 chip_id; > >> + int error; > >> + > >> + error = dmard06_i2c_read(dmard06->client, DMARD06_CHIP_ID_REG, &buf); > >> + if (error) { > >> + dev_err(&dmard06->client->dev, "Failed to read chip id: %d\n", > >> + error); > >> + return error; > >> + } > >> + > >> + chip_id = (buf & 0x00ff); > > > > why? buf is u8 anyways > > > >> + if (chip_id != DMARD06_CHIP_ID) { > >> + dev_err(&dmard06->client->dev, "Invalid chip id: %02x\n", > >> + chip_id); > >> + return -EINVAL; > > > > often ENODEV is used for this case > > > >> + } > >> + > >> + dev_info(&dmard06->client->dev, "Found DMARD%02x chip\n", chip_id); > > > > we prefer silent probing of the driver, please don't clutter the log > > > >> + > >> + return 0; > >> +} > >> + > >> +static int dmard06_read_raw(struct iio_dev *indio_dev, > >> + struct iio_chan_spec const *chan, > >> + int *val, int *val2, long mask) > >> +{ > >> + struct dmard06_data *dmard06 = iio_priv(indio_dev); > >> + u8 buf; > >> + bool reversed; > >> + int error; > >> + int tmp; > >> + > >> + switch (mask) { > >> + case IIO_CHAN_INFO_RAW: > >> + error = dmard06_i2c_read(dmard06->client, chan->address, &buf); > >> + if (error) { > >> + dev_err(&dmard06->client->dev, > >> + "Failed to read data %d\n", error); > >> + return error; > >> + } > >> + > >> + reversed = (buf >> 7) & 1; > >> + tmp = (int)((buf & 0x7f) >> 1); > > > > > >> + > >> + switch (chan->type) { > >> + case IIO_ACCEL: > > > > wouldn't sign_extend32(buf >> 1, 6) do the job? > > > >> + *val = reversed ? (tmp - DMARD06_AXIS_MAX_VAL) : tmp; > >> + return IIO_VAL_INT; > >> + case IIO_TEMP: > >> + *val = reversed ? -tmp : tmp; > >> + return IIO_VAL_INT; > >> + default: > >> + return -EINVAL; > >> + } > >> + case IIO_CHAN_INFO_OFFSET: > >> + switch (chan->type) { > >> + case IIO_TEMP: > >> + *val = DMARD06_TEMP_CENTER_VAL; > >> + return IIO_VAL_INT; > >> + default: > >> + return -EINVAL; > >> + } > >> + case IIO_CHAN_INFO_SCALE: > >> + switch (chan->type) { > >> + case IIO_ACCEL: > >> + *val = 0; > >> + *val2 = DMARD06_AXIS_SCALE_VAL; > >> + return IIO_VAL_INT_PLUS_MICRO; > >> + default: > >> + return -EINVAL; > >> + } > >> + default: > >> + return -EINVAL; > >> + } > >> +} > >> + > >> +static const struct iio_info dmard06_info = { > >> + .driver_module = THIS_MODULE, > >> + .read_raw = dmard06_read_raw, > >> +}; > >> + > >> +#define DMARD06_ACCEL_CHANNEL(_axis, reg) { \ > > > > maybe rename reg to _reg > > > >> + .type = IIO_ACCEL, \ > >> + .address = reg, \ > >> + .channel2 = IIO_MOD_##_axis, \ > >> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ > >> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ > >> + .modified = 1, \ > >> +} > >> + > >> +#define DMARD06_TEMP_CHANNEL(reg) { \ > >> + .type = IIO_TEMP, \ > >> + .address = reg, \ > >> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ > >> + BIT(IIO_CHAN_INFO_OFFSET), \ > >> +} > >> + > >> +static const struct iio_chan_spec dmard06_channels[] = { > >> + DMARD06_ACCEL_CHANNEL(X, DMARD06_XOUT_REG), > >> + DMARD06_ACCEL_CHANNEL(Y, DMARD06_YOUT_REG), > >> + DMARD06_ACCEL_CHANNEL(Z, DMARD06_ZOUT_REG), > >> + DMARD06_TEMP_CHANNEL(DMARD06_TOUT_REG), > >> +}; > >> + > >> +static int dmard06_probe(struct i2c_client *client, > >> + const struct i2c_device_id *id) > >> +{ > >> + int error; > >> + struct iio_dev *indio_dev; > >> + struct dmard06_data *dmard06; > >> + > >> + dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr); > > > > not needed > > > >> + > >> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { > >> + dev_err(&client->dev, "I2C check functionality failed\n"); > >> + return -ENXIO; > >> + } > >> + > >> + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dmard06)); > >> + if (!indio_dev) { > >> + dev_err(&client->dev, "Failed to allocate iio device\n"); > >> + return -ENOMEM; > >> + } > >> + > >> + dmard06 = iio_priv(indio_dev); > >> + dmard06->client = client; > >> + > >> + error = dmard06_read_chip_id(dmard06); > >> + if (error) > >> + return error; > >> + > >> + i2c_set_clientdata(client, indio_dev); > >> + indio_dev->dev.parent = &client->dev; > >> + indio_dev->name = DMARD06_DRV_NAME; > >> + indio_dev->modes = INDIO_DIRECT_MODE; > >> + indio_dev->channels = dmard06_channels; > >> + indio_dev->num_channels = ARRAY_SIZE(dmard06_channels); > >> + indio_dev->info = &dmard06_info; > >> + > >> + return devm_iio_device_register(&client->dev, indio_dev); > >> +} > >> + > >> +static const struct i2c_device_id dmard06_id[] = { > >> + { "dmard06", 0 }, > >> + { } > >> +}; > >> +MODULE_DEVICE_TABLE(i2c, dmard06_id); > >> + > >> +static const struct of_device_id dmard06_of_match[] = { > >> + { .compatible = "domintech,dmard06" }, > >> + { } > >> +}; > >> +MODULE_DEVICE_TABLE(of, dmard06_of_match); > >> + > >> +static struct i2c_driver dmard06_driver = { > >> + .probe = dmard06_probe, > >> + .id_table = dmard06_id, > >> + .driver = { > >> + .name = DMARD06_DRV_NAME, > >> + .of_match_table = of_match_ptr(dmard06_of_match), > >> + }, > >> +}; > >> +module_i2c_driver(dmard06_driver); > >> + > >> +MODULE_AUTHOR("Aleksei Mamlin <mamlinav@gmail.com>"); > >> +MODULE_DESCRIPTION("Domintech DMARD06 accelerometer driver"); > >> +MODULE_LICENSE("GPL v2"); > >> > > > -- Thanks and regards, Aleksei Mamlin ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 2/2] iio: accel: Add support for Domintech DMARD06 accelerometer 2016-07-25 7:50 ` Aleksei Mamlin @ 2016-07-25 8:36 ` Peter Meerwald-Stadler 0 siblings, 0 replies; 23+ messages in thread From: Peter Meerwald-Stadler @ 2016-07-25 8:36 UTC (permalink / raw) To: Aleksei Mamlin Cc: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen, Rob Herring, devicetree, linux-kernel, linux-iio > > >> This patch add support for Domintech DMARD06 accelerometer. > > > > > > comments below > > > > > >> Domintech DMARD06 is a low-g tri-axial digital accelerometer for > > >> cost-sensitive consumer application. > > >> > > >> Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> > > I don't have anything to add here. Nice fairly clean first version. > > Jonathan, I found that dmard05, dmard06 and dmard07 chips are very similar > and have the same registers. There is not so many difference between chips, > dmard05 and dmard07 have 8 bit adc and dmard06 only 7 bit adc. > > I want to add support of those chips in driver, but there is the question: > should driver be renamed to something like dmard050607 or just dmard05 > as first chip in this series? just pick one name, e.g. dmard06; the file name should NOT contain things such as dmard0x or 050607 -- marketing is just too creative :) and remember: "There are two hard things in computer science: cache invalidation, naming things, and off-by-one errors." p. > > >> --- > > >> .../devicetree/bindings/iio/accel/dmard06.txt | 17 ++ > > >> drivers/iio/accel/Kconfig | 11 ++ > > >> drivers/iio/accel/Makefile | 1 + > > >> drivers/iio/accel/dmard06.c | 219 +++++++++++++++++++++ > > >> 4 files changed, 248 insertions(+) > > >> create mode 100644 Documentation/devicetree/bindings/iio/accel/dmard06.txt > > >> create mode 100644 drivers/iio/accel/dmard06.c > > >> > > >> diff --git a/Documentation/devicetree/bindings/iio/accel/dmard06.txt b/Documentation/devicetree/bindings/iio/accel/dmard06.txt > > >> new file mode 100644 > > >> index 0000000..cc2231a > > >> --- /dev/null > > >> +++ b/Documentation/devicetree/bindings/iio/accel/dmard06.txt > > >> @@ -0,0 +1,17 @@ > > >> +Device tree bindings for Domintech DMARD06 acceletometer > > > > > > typo: accelerometer > > > > > >> + > > >> +Required properties: > > >> + - compatible : Should be "domintech,dmard06" > > >> + - reg : I2C address of the chip. Should be 0x1c > > >> + > > >> +Example: > > >> + &i2c1 { > > >> + /* ... */ > > >> + > > >> + accelerometer@1c { > > >> + compatible = "domintech,dmard06"; > > >> + reg = <0x1c>; > > >> + }; > > >> + > > >> + /* ... */ > > >> + }; > > >> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig > > >> index e4a758c..abc8536 100644 > > >> --- a/drivers/iio/accel/Kconfig > > >> +++ b/drivers/iio/accel/Kconfig > > >> @@ -40,6 +40,17 @@ config BMC150_ACCEL_SPI > > >> tristate > > >> select REGMAP_SPI > > >> > > >> +config DMARD06 > > >> + tristate "Domintech DMARD06 Digital Accelerometer Driver" > > >> + depends on OF || COMPILE_TEST > > >> + depends on I2C > > >> + help > > >> + Say yes here to build support for the Domintech DMARD06 low-g > > >> + tri-axial digital accelerometer connected via an I2C bus. > > >> + > > >> + To compile this driver as a module, choose M here: the > > >> + module will be called dmard06. > > >> + > > >> config HID_SENSOR_ACCEL_3D > > >> depends on HID_SENSOR_HUB > > >> select IIO_BUFFER > > >> diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile > > >> index 71b6794..a96b269 100644 > > >> --- a/drivers/iio/accel/Makefile > > >> +++ b/drivers/iio/accel/Makefile > > >> @@ -7,6 +7,7 @@ obj-$(CONFIG_BMA180) += bma180.o > > >> obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o > > >> obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o > > >> obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o > > >> +obj-$(CONFIG_DMARD06) += dmard06.o > > >> obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o > > >> obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o > > >> obj-$(CONFIG_KXSD9) += kxsd9.o > > >> diff --git a/drivers/iio/accel/dmard06.c b/drivers/iio/accel/dmard06.c > > >> new file mode 100644 > > >> index 0000000..433e430 > > >> --- /dev/null > > >> +++ b/drivers/iio/accel/dmard06.c > > >> @@ -0,0 +1,219 @@ > > >> +/* > > >> + * IIO driver for Domintech DMARD06 accelerometer > > >> + * > > >> + * Copyright (C) 2016 Aleksei Mamlin <mamlinav@gmail.com> > > >> + * > > >> + * This program is free software; you can redistribute it and/or modify it > > >> + * under the terms and conditions of the GNU General Public License, > > >> + * version 2, as published by the Free Software Foundation. > > >> + */ > > >> + > > >> +#include <linux/module.h> > > >> +#include <linux/i2c.h> > > >> +#include <linux/iio/iio.h> > > >> + > > >> +struct dmard06_data { > > >> + struct i2c_client *client; > > >> +}; > > >> + > > >> +#define DMARD06_DRV_NAME "dmard06" > > >> + > > >> +/* Device data registers */ > > >> +#define DMARD06_CHIP_ID_REG 0x0f > > >> +#define DMARD06_TOUT_REG 0x40 > > >> +#define DMARD06_XOUT_REG 0x41 > > >> +#define DMARD06_YOUT_REG 0x42 > > >> +#define DMARD06_ZOUT_REG 0x43 > > >> + > > >> +/* Device ID value */ > > >> +#define DMARD06_CHIP_ID 0x06 > > >> + > > >> +/* Device values */ > > >> +#define DMARD06_AXIS_MAX_VAL 64 > > >> +#define DMARD06_AXIS_SCALE_VAL 31250 > > >> +#define DMARD06_TEMP_CENTER_VAL 25 > > >> + > > >> +static int dmard06_i2c_read(struct i2c_client *client, u8 reg, u8 *buf) > > >> +{ > > >> + int error; > > > > > > 'error' is a bit pessimistic, how about 'ret'? :-) > > > > > >> + > > > > > > can't use i2c_smbus_read_byte_data()? > > > > > >> + error = i2c_master_send(client, ®, 1); > > >> + if (unlikely(error < 0)) > > >> + return error; > > >> + > > >> + error = i2c_master_recv(client, buf, 1); > > >> + if (unlikely(error < 0)) > > >> + return error; > > > > > > not sure if it is worth to annotate unlikely() here -- i2c is slooow > > > locking is needed if you really need two i2c_master calls > > > > > >> + return 0; > > >> +} > > >> + > > >> +static int dmard06_read_chip_id(struct dmard06_data *dmard06) > > >> +{ > > >> + u8 buf; > > >> + u8 chip_id; > > >> + int error; > > >> + > > >> + error = dmard06_i2c_read(dmard06->client, DMARD06_CHIP_ID_REG, &buf); > > >> + if (error) { > > >> + dev_err(&dmard06->client->dev, "Failed to read chip id: %d\n", > > >> + error); > > >> + return error; > > >> + } > > >> + > > >> + chip_id = (buf & 0x00ff); > > > > > > why? buf is u8 anyways > > > > > >> + if (chip_id != DMARD06_CHIP_ID) { > > >> + dev_err(&dmard06->client->dev, "Invalid chip id: %02x\n", > > >> + chip_id); > > >> + return -EINVAL; > > > > > > often ENODEV is used for this case > > > > > >> + } > > >> + > > >> + dev_info(&dmard06->client->dev, "Found DMARD%02x chip\n", chip_id); > > > > > > we prefer silent probing of the driver, please don't clutter the log > > > > > >> + > > >> + return 0; > > >> +} > > >> + > > >> +static int dmard06_read_raw(struct iio_dev *indio_dev, > > >> + struct iio_chan_spec const *chan, > > >> + int *val, int *val2, long mask) > > >> +{ > > >> + struct dmard06_data *dmard06 = iio_priv(indio_dev); > > >> + u8 buf; > > >> + bool reversed; > > >> + int error; > > >> + int tmp; > > >> + > > >> + switch (mask) { > > >> + case IIO_CHAN_INFO_RAW: > > >> + error = dmard06_i2c_read(dmard06->client, chan->address, &buf); > > >> + if (error) { > > >> + dev_err(&dmard06->client->dev, > > >> + "Failed to read data %d\n", error); > > >> + return error; > > >> + } > > >> + > > >> + reversed = (buf >> 7) & 1; > > >> + tmp = (int)((buf & 0x7f) >> 1); > > > > > > > > >> + > > >> + switch (chan->type) { > > >> + case IIO_ACCEL: > > > > > > wouldn't sign_extend32(buf >> 1, 6) do the job? > > > > > >> + *val = reversed ? (tmp - DMARD06_AXIS_MAX_VAL) : tmp; > > >> + return IIO_VAL_INT; > > >> + case IIO_TEMP: > > >> + *val = reversed ? -tmp : tmp; > > >> + return IIO_VAL_INT; > > >> + default: > > >> + return -EINVAL; > > >> + } > > >> + case IIO_CHAN_INFO_OFFSET: > > >> + switch (chan->type) { > > >> + case IIO_TEMP: > > >> + *val = DMARD06_TEMP_CENTER_VAL; > > >> + return IIO_VAL_INT; > > >> + default: > > >> + return -EINVAL; > > >> + } > > >> + case IIO_CHAN_INFO_SCALE: > > >> + switch (chan->type) { > > >> + case IIO_ACCEL: > > >> + *val = 0; > > >> + *val2 = DMARD06_AXIS_SCALE_VAL; > > >> + return IIO_VAL_INT_PLUS_MICRO; > > >> + default: > > >> + return -EINVAL; > > >> + } > > >> + default: > > >> + return -EINVAL; > > >> + } > > >> +} > > >> + > > >> +static const struct iio_info dmard06_info = { > > >> + .driver_module = THIS_MODULE, > > >> + .read_raw = dmard06_read_raw, > > >> +}; > > >> + > > >> +#define DMARD06_ACCEL_CHANNEL(_axis, reg) { \ > > > > > > maybe rename reg to _reg > > > > > >> + .type = IIO_ACCEL, \ > > >> + .address = reg, \ > > >> + .channel2 = IIO_MOD_##_axis, \ > > >> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ > > >> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ > > >> + .modified = 1, \ > > >> +} > > >> + > > >> +#define DMARD06_TEMP_CHANNEL(reg) { \ > > >> + .type = IIO_TEMP, \ > > >> + .address = reg, \ > > >> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ > > >> + BIT(IIO_CHAN_INFO_OFFSET), \ > > >> +} > > >> + > > >> +static const struct iio_chan_spec dmard06_channels[] = { > > >> + DMARD06_ACCEL_CHANNEL(X, DMARD06_XOUT_REG), > > >> + DMARD06_ACCEL_CHANNEL(Y, DMARD06_YOUT_REG), > > >> + DMARD06_ACCEL_CHANNEL(Z, DMARD06_ZOUT_REG), > > >> + DMARD06_TEMP_CHANNEL(DMARD06_TOUT_REG), > > >> +}; > > >> + > > >> +static int dmard06_probe(struct i2c_client *client, > > >> + const struct i2c_device_id *id) > > >> +{ > > >> + int error; > > >> + struct iio_dev *indio_dev; > > >> + struct dmard06_data *dmard06; > > >> + > > >> + dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr); > > > > > > not needed > > > > > >> + > > >> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { > > >> + dev_err(&client->dev, "I2C check functionality failed\n"); > > >> + return -ENXIO; > > >> + } > > >> + > > >> + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dmard06)); > > >> + if (!indio_dev) { > > >> + dev_err(&client->dev, "Failed to allocate iio device\n"); > > >> + return -ENOMEM; > > >> + } > > >> + > > >> + dmard06 = iio_priv(indio_dev); > > >> + dmard06->client = client; > > >> + > > >> + error = dmard06_read_chip_id(dmard06); > > >> + if (error) > > >> + return error; > > >> + > > >> + i2c_set_clientdata(client, indio_dev); > > >> + indio_dev->dev.parent = &client->dev; > > >> + indio_dev->name = DMARD06_DRV_NAME; > > >> + indio_dev->modes = INDIO_DIRECT_MODE; > > >> + indio_dev->channels = dmard06_channels; > > >> + indio_dev->num_channels = ARRAY_SIZE(dmard06_channels); > > >> + indio_dev->info = &dmard06_info; > > >> + > > >> + return devm_iio_device_register(&client->dev, indio_dev); > > >> +} > > >> + > > >> +static const struct i2c_device_id dmard06_id[] = { > > >> + { "dmard06", 0 }, > > >> + { } > > >> +}; > > >> +MODULE_DEVICE_TABLE(i2c, dmard06_id); > > >> + > > >> +static const struct of_device_id dmard06_of_match[] = { > > >> + { .compatible = "domintech,dmard06" }, > > >> + { } > > >> +}; > > >> +MODULE_DEVICE_TABLE(of, dmard06_of_match); > > >> + > > >> +static struct i2c_driver dmard06_driver = { > > >> + .probe = dmard06_probe, > > >> + .id_table = dmard06_id, > > >> + .driver = { > > >> + .name = DMARD06_DRV_NAME, > > >> + .of_match_table = of_match_ptr(dmard06_of_match), > > >> + }, > > >> +}; > > >> +module_i2c_driver(dmard06_driver); > > >> + > > >> +MODULE_AUTHOR("Aleksei Mamlin <mamlinav@gmail.com>"); > > >> +MODULE_DESCRIPTION("Domintech DMARD06 accelerometer driver"); > > >> +MODULE_LICENSE("GPL v2"); > > >> > > > > > > > > -- Peter Meerwald-Stadler +43-664-2444418 (mobile) ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 2/2] iio: accel: Add support for Domintech DMARD06 accelerometer @ 2016-07-23 21:49 ` Aleksei Mamlin 0 siblings, 0 replies; 23+ messages in thread From: Aleksei Mamlin @ 2016-07-23 21:49 UTC (permalink / raw) To: Peter Meerwald-Stadler Cc: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen, Rob Herring, devicetree, linux-kernel, linux-iio On Fri, 22 Jul 2016 00:41:39 +0200 (CEST) Peter Meerwald-Stadler <pmeerw@pmeerw.net> wrote: > > > This patch add support for Domintech DMARD06 accelerometer. > > comments below > > > Domintech DMARD06 is a low-g tri-axial digital accelerometer for > > cost-sensitive consumer application. > > > > Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> > > --- > > .../devicetree/bindings/iio/accel/dmard06.txt | 17 ++ > > drivers/iio/accel/Kconfig | 11 ++ > > drivers/iio/accel/Makefile | 1 + > > drivers/iio/accel/dmard06.c | 219 +++++++++++++++++++++ > > 4 files changed, 248 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/iio/accel/dmard06.txt > > create mode 100644 drivers/iio/accel/dmard06.c > > > > diff --git a/Documentation/devicetree/bindings/iio/accel/dmard06.txt b/Documentation/devicetree/bindings/iio/accel/dmard06.txt > > new file mode 100644 > > index 0000000..cc2231a > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/iio/accel/dmard06.txt > > @@ -0,0 +1,17 @@ > > +Device tree bindings for Domintech DMARD06 acceletometer > > typo: accelerometer > > > + > > +Required properties: > > + - compatible : Should be "domintech,dmard06" > > + - reg : I2C address of the chip. Should be 0x1c > > + > > +Example: > > + &i2c1 { > > + /* ... */ > > + > > + accelerometer@1c { > > + compatible = "domintech,dmard06"; > > + reg = <0x1c>; > > + }; > > + > > + /* ... */ > > + }; > > diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig > > index e4a758c..abc8536 100644 > > --- a/drivers/iio/accel/Kconfig > > +++ b/drivers/iio/accel/Kconfig > > @@ -40,6 +40,17 @@ config BMC150_ACCEL_SPI > > tristate > > select REGMAP_SPI > > > > +config DMARD06 > > + tristate "Domintech DMARD06 Digital Accelerometer Driver" > > + depends on OF || COMPILE_TEST > > + depends on I2C > > + help > > + Say yes here to build support for the Domintech DMARD06 low-g > > + tri-axial digital accelerometer connected via an I2C bus. > > + > > + To compile this driver as a module, choose M here: the > > + module will be called dmard06. > > + > > config HID_SENSOR_ACCEL_3D > > depends on HID_SENSOR_HUB > > select IIO_BUFFER > > diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile > > index 71b6794..a96b269 100644 > > --- a/drivers/iio/accel/Makefile > > +++ b/drivers/iio/accel/Makefile > > @@ -7,6 +7,7 @@ obj-$(CONFIG_BMA180) += bma180.o > > obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o > > obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o > > obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o > > +obj-$(CONFIG_DMARD06) += dmard06.o > > obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o > > obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o > > obj-$(CONFIG_KXSD9) += kxsd9.o > > diff --git a/drivers/iio/accel/dmard06.c b/drivers/iio/accel/dmard06.c > > new file mode 100644 > > index 0000000..433e430 > > --- /dev/null > > +++ b/drivers/iio/accel/dmard06.c > > @@ -0,0 +1,219 @@ > > +/* > > + * IIO driver for Domintech DMARD06 accelerometer > > + * > > + * Copyright (C) 2016 Aleksei Mamlin <mamlinav@gmail.com> > > + * > > + * This program is free software; you can redistribute it and/or modify it > > + * under the terms and conditions of the GNU General Public License, > > + * version 2, as published by the Free Software Foundation. > > + */ > > + > > +#include <linux/module.h> > > +#include <linux/i2c.h> > > +#include <linux/iio/iio.h> > > + > > +struct dmard06_data { > > + struct i2c_client *client; > > +}; > > + > > +#define DMARD06_DRV_NAME "dmard06" > > + > > +/* Device data registers */ > > +#define DMARD06_CHIP_ID_REG 0x0f > > +#define DMARD06_TOUT_REG 0x40 > > +#define DMARD06_XOUT_REG 0x41 > > +#define DMARD06_YOUT_REG 0x42 > > +#define DMARD06_ZOUT_REG 0x43 > > + > > +/* Device ID value */ > > +#define DMARD06_CHIP_ID 0x06 > > + > > +/* Device values */ > > +#define DMARD06_AXIS_MAX_VAL 64 > > +#define DMARD06_AXIS_SCALE_VAL 31250 > > +#define DMARD06_TEMP_CENTER_VAL 25 > > + > > +static int dmard06_i2c_read(struct i2c_client *client, u8 reg, u8 *buf) > > +{ > > + int error; > > 'error' is a bit pessimistic, how about 'ret'? :-) > > > + > > can't use i2c_smbus_read_byte_data()? > I'll use it in next patch version > > > + error = i2c_master_send(client, ®, 1); > > + if (unlikely(error < 0)) > > + return error; > > + > > + error = i2c_master_recv(client, buf, 1); > > + if (unlikely(error < 0)) > > + return error; > > not sure if it is worth to annotate unlikely() here -- i2c is slooow > locking is needed if you really need two i2c_master calls > > > + return 0; > > +} > > + > > +static int dmard06_read_chip_id(struct dmard06_data *dmard06) > > +{ > > + u8 buf; > > + u8 chip_id; > > + int error; > > + > > + error = dmard06_i2c_read(dmard06->client, DMARD06_CHIP_ID_REG, &buf); > > + if (error) { > > + dev_err(&dmard06->client->dev, "Failed to read chip id: %d\n", > > + error); > > + return error; > > + } > > + > > + chip_id = (buf & 0x00ff); > > why? buf is u8 anyways > > > + if (chip_id != DMARD06_CHIP_ID) { > > + dev_err(&dmard06->client->dev, "Invalid chip id: %02x\n", > > + chip_id); > > + return -EINVAL; > > often ENODEV is used for this case > > > + } > > + > > + dev_info(&dmard06->client->dev, "Found DMARD%02x chip\n", chip_id); > > we prefer silent probing of the driver, please don't clutter the log > > > + > > + return 0; > > +} > > + > > +static int dmard06_read_raw(struct iio_dev *indio_dev, > > + struct iio_chan_spec const *chan, > > + int *val, int *val2, long mask) > > +{ > > + struct dmard06_data *dmard06 = iio_priv(indio_dev); > > + u8 buf; > > + bool reversed; > > + int error; > > + int tmp; > > + > > + switch (mask) { > > + case IIO_CHAN_INFO_RAW: > > + error = dmard06_i2c_read(dmard06->client, chan->address, &buf); > > + if (error) { > > + dev_err(&dmard06->client->dev, > > + "Failed to read data %d\n", error); > > + return error; > > + } > > + > > + reversed = (buf >> 7) & 1; > > + tmp = (int)((buf & 0x7f) >> 1); > > > > + > > + switch (chan->type) { > > + case IIO_ACCEL: > > wouldn't sign_extend32(buf >> 1, 6) do the job? > You are right, this do the job for axis and temperature. Thanks > > > + *val = reversed ? (tmp - DMARD06_AXIS_MAX_VAL) : tmp; > > + return IIO_VAL_INT; > > + case IIO_TEMP: > > + *val = reversed ? -tmp : tmp; > > + return IIO_VAL_INT; > > + default: > > + return -EINVAL; > > + } > > + case IIO_CHAN_INFO_OFFSET: > > + switch (chan->type) { > > + case IIO_TEMP: > > + *val = DMARD06_TEMP_CENTER_VAL; > > + return IIO_VAL_INT; > > + default: > > + return -EINVAL; > > + } > > + case IIO_CHAN_INFO_SCALE: > > + switch (chan->type) { > > + case IIO_ACCEL: > > + *val = 0; > > + *val2 = DMARD06_AXIS_SCALE_VAL; > > + return IIO_VAL_INT_PLUS_MICRO; > > + default: > > + return -EINVAL; > > + } > > + default: > > + return -EINVAL; > > + } > > +} > > + > > +static const struct iio_info dmard06_info = { > > + .driver_module = THIS_MODULE, > > + .read_raw = dmard06_read_raw, > > +}; > > + > > +#define DMARD06_ACCEL_CHANNEL(_axis, reg) { \ > > maybe rename reg to _reg > > > + .type = IIO_ACCEL, \ > > + .address = reg, \ > > + .channel2 = IIO_MOD_##_axis, \ > > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ > > + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ > > + .modified = 1, \ > > +} > > + > > +#define DMARD06_TEMP_CHANNEL(reg) { \ > > + .type = IIO_TEMP, \ > > + .address = reg, \ > > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ > > + BIT(IIO_CHAN_INFO_OFFSET), \ > > +} > > + > > +static const struct iio_chan_spec dmard06_channels[] = { > > + DMARD06_ACCEL_CHANNEL(X, DMARD06_XOUT_REG), > > + DMARD06_ACCEL_CHANNEL(Y, DMARD06_YOUT_REG), > > + DMARD06_ACCEL_CHANNEL(Z, DMARD06_ZOUT_REG), > > + DMARD06_TEMP_CHANNEL(DMARD06_TOUT_REG), > > +}; > > + > > +static int dmard06_probe(struct i2c_client *client, > > + const struct i2c_device_id *id) > > +{ > > + int error; > > + struct iio_dev *indio_dev; > > + struct dmard06_data *dmard06; > > + > > + dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr); > > not needed > > > + > > + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { > > + dev_err(&client->dev, "I2C check functionality failed\n"); > > + return -ENXIO; > > + } > > + > > + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dmard06)); > > + if (!indio_dev) { > > + dev_err(&client->dev, "Failed to allocate iio device\n"); > > + return -ENOMEM; > > + } > > + > > + dmard06 = iio_priv(indio_dev); > > + dmard06->client = client; > > + > > + error = dmard06_read_chip_id(dmard06); > > + if (error) > > + return error; > > + > > + i2c_set_clientdata(client, indio_dev); > > + indio_dev->dev.parent = &client->dev; > > + indio_dev->name = DMARD06_DRV_NAME; > > + indio_dev->modes = INDIO_DIRECT_MODE; > > + indio_dev->channels = dmard06_channels; > > + indio_dev->num_channels = ARRAY_SIZE(dmard06_channels); > > + indio_dev->info = &dmard06_info; > > + > > + return devm_iio_device_register(&client->dev, indio_dev); > > +} > > + > > +static const struct i2c_device_id dmard06_id[] = { > > + { "dmard06", 0 }, > > + { } > > +}; > > +MODULE_DEVICE_TABLE(i2c, dmard06_id); > > + > > +static const struct of_device_id dmard06_of_match[] = { > > + { .compatible = "domintech,dmard06" }, > > + { } > > +}; > > +MODULE_DEVICE_TABLE(of, dmard06_of_match); > > + > > +static struct i2c_driver dmard06_driver = { > > + .probe = dmard06_probe, > > + .id_table = dmard06_id, > > + .driver = { > > + .name = DMARD06_DRV_NAME, > > + .of_match_table = of_match_ptr(dmard06_of_match), > > + }, > > +}; > > +module_i2c_driver(dmard06_driver); > > + > > +MODULE_AUTHOR("Aleksei Mamlin <mamlinav@gmail.com>"); > > +MODULE_DESCRIPTION("Domintech DMARD06 accelerometer driver"); > > +MODULE_LICENSE("GPL v2"); > > > > -- > > Peter Meerwald-Stadler > +43-664-2444418 (mobile) -- Thanks and regards, Aleksei Mamlin ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 2/2] iio: accel: Add support for Domintech DMARD06 accelerometer @ 2016-07-23 21:49 ` Aleksei Mamlin 0 siblings, 0 replies; 23+ messages in thread From: Aleksei Mamlin @ 2016-07-23 21:49 UTC (permalink / raw) To: Peter Meerwald-Stadler Cc: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen, Rob Herring, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-iio-u79uwXL29TY76Z2rM5mHXA On Fri, 22 Jul 2016 00:41:39 +0200 (CEST) Peter Meerwald-Stadler <pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org> wrote: > > > This patch add support for Domintech DMARD06 accelerometer. > > comments below > > > Domintech DMARD06 is a low-g tri-axial digital accelerometer for > > cost-sensitive consumer application. > > > > Signed-off-by: Aleksei Mamlin <mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > > --- > > .../devicetree/bindings/iio/accel/dmard06.txt | 17 ++ > > drivers/iio/accel/Kconfig | 11 ++ > > drivers/iio/accel/Makefile | 1 + > > drivers/iio/accel/dmard06.c | 219 +++++++++++++++++++++ > > 4 files changed, 248 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/iio/accel/dmard06.txt > > create mode 100644 drivers/iio/accel/dmard06.c > > > > diff --git a/Documentation/devicetree/bindings/iio/accel/dmard06.txt b/Documentation/devicetree/bindings/iio/accel/dmard06.txt > > new file mode 100644 > > index 0000000..cc2231a > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/iio/accel/dmard06.txt > > @@ -0,0 +1,17 @@ > > +Device tree bindings for Domintech DMARD06 acceletometer > > typo: accelerometer > > > + > > +Required properties: > > + - compatible : Should be "domintech,dmard06" > > + - reg : I2C address of the chip. Should be 0x1c > > + > > +Example: > > + &i2c1 { > > + /* ... */ > > + > > + accelerometer@1c { > > + compatible = "domintech,dmard06"; > > + reg = <0x1c>; > > + }; > > + > > + /* ... */ > > + }; > > diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig > > index e4a758c..abc8536 100644 > > --- a/drivers/iio/accel/Kconfig > > +++ b/drivers/iio/accel/Kconfig > > @@ -40,6 +40,17 @@ config BMC150_ACCEL_SPI > > tristate > > select REGMAP_SPI > > > > +config DMARD06 > > + tristate "Domintech DMARD06 Digital Accelerometer Driver" > > + depends on OF || COMPILE_TEST > > + depends on I2C > > + help > > + Say yes here to build support for the Domintech DMARD06 low-g > > + tri-axial digital accelerometer connected via an I2C bus. > > + > > + To compile this driver as a module, choose M here: the > > + module will be called dmard06. > > + > > config HID_SENSOR_ACCEL_3D > > depends on HID_SENSOR_HUB > > select IIO_BUFFER > > diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile > > index 71b6794..a96b269 100644 > > --- a/drivers/iio/accel/Makefile > > +++ b/drivers/iio/accel/Makefile > > @@ -7,6 +7,7 @@ obj-$(CONFIG_BMA180) += bma180.o > > obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o > > obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o > > obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o > > +obj-$(CONFIG_DMARD06) += dmard06.o > > obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o > > obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o > > obj-$(CONFIG_KXSD9) += kxsd9.o > > diff --git a/drivers/iio/accel/dmard06.c b/drivers/iio/accel/dmard06.c > > new file mode 100644 > > index 0000000..433e430 > > --- /dev/null > > +++ b/drivers/iio/accel/dmard06.c > > @@ -0,0 +1,219 @@ > > +/* > > + * IIO driver for Domintech DMARD06 accelerometer > > + * > > + * Copyright (C) 2016 Aleksei Mamlin <mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > > + * > > + * This program is free software; you can redistribute it and/or modify it > > + * under the terms and conditions of the GNU General Public License, > > + * version 2, as published by the Free Software Foundation. > > + */ > > + > > +#include <linux/module.h> > > +#include <linux/i2c.h> > > +#include <linux/iio/iio.h> > > + > > +struct dmard06_data { > > + struct i2c_client *client; > > +}; > > + > > +#define DMARD06_DRV_NAME "dmard06" > > + > > +/* Device data registers */ > > +#define DMARD06_CHIP_ID_REG 0x0f > > +#define DMARD06_TOUT_REG 0x40 > > +#define DMARD06_XOUT_REG 0x41 > > +#define DMARD06_YOUT_REG 0x42 > > +#define DMARD06_ZOUT_REG 0x43 > > + > > +/* Device ID value */ > > +#define DMARD06_CHIP_ID 0x06 > > + > > +/* Device values */ > > +#define DMARD06_AXIS_MAX_VAL 64 > > +#define DMARD06_AXIS_SCALE_VAL 31250 > > +#define DMARD06_TEMP_CENTER_VAL 25 > > + > > +static int dmard06_i2c_read(struct i2c_client *client, u8 reg, u8 *buf) > > +{ > > + int error; > > 'error' is a bit pessimistic, how about 'ret'? :-) > > > + > > can't use i2c_smbus_read_byte_data()? > I'll use it in next patch version > > > + error = i2c_master_send(client, ®, 1); > > + if (unlikely(error < 0)) > > + return error; > > + > > + error = i2c_master_recv(client, buf, 1); > > + if (unlikely(error < 0)) > > + return error; > > not sure if it is worth to annotate unlikely() here -- i2c is slooow > locking is needed if you really need two i2c_master calls > > > + return 0; > > +} > > + > > +static int dmard06_read_chip_id(struct dmard06_data *dmard06) > > +{ > > + u8 buf; > > + u8 chip_id; > > + int error; > > + > > + error = dmard06_i2c_read(dmard06->client, DMARD06_CHIP_ID_REG, &buf); > > + if (error) { > > + dev_err(&dmard06->client->dev, "Failed to read chip id: %d\n", > > + error); > > + return error; > > + } > > + > > + chip_id = (buf & 0x00ff); > > why? buf is u8 anyways > > > + if (chip_id != DMARD06_CHIP_ID) { > > + dev_err(&dmard06->client->dev, "Invalid chip id: %02x\n", > > + chip_id); > > + return -EINVAL; > > often ENODEV is used for this case > > > + } > > + > > + dev_info(&dmard06->client->dev, "Found DMARD%02x chip\n", chip_id); > > we prefer silent probing of the driver, please don't clutter the log > > > + > > + return 0; > > +} > > + > > +static int dmard06_read_raw(struct iio_dev *indio_dev, > > + struct iio_chan_spec const *chan, > > + int *val, int *val2, long mask) > > +{ > > + struct dmard06_data *dmard06 = iio_priv(indio_dev); > > + u8 buf; > > + bool reversed; > > + int error; > > + int tmp; > > + > > + switch (mask) { > > + case IIO_CHAN_INFO_RAW: > > + error = dmard06_i2c_read(dmard06->client, chan->address, &buf); > > + if (error) { > > + dev_err(&dmard06->client->dev, > > + "Failed to read data %d\n", error); > > + return error; > > + } > > + > > + reversed = (buf >> 7) & 1; > > + tmp = (int)((buf & 0x7f) >> 1); > > > > + > > + switch (chan->type) { > > + case IIO_ACCEL: > > wouldn't sign_extend32(buf >> 1, 6) do the job? > You are right, this do the job for axis and temperature. Thanks > > > + *val = reversed ? (tmp - DMARD06_AXIS_MAX_VAL) : tmp; > > + return IIO_VAL_INT; > > + case IIO_TEMP: > > + *val = reversed ? -tmp : tmp; > > + return IIO_VAL_INT; > > + default: > > + return -EINVAL; > > + } > > + case IIO_CHAN_INFO_OFFSET: > > + switch (chan->type) { > > + case IIO_TEMP: > > + *val = DMARD06_TEMP_CENTER_VAL; > > + return IIO_VAL_INT; > > + default: > > + return -EINVAL; > > + } > > + case IIO_CHAN_INFO_SCALE: > > + switch (chan->type) { > > + case IIO_ACCEL: > > + *val = 0; > > + *val2 = DMARD06_AXIS_SCALE_VAL; > > + return IIO_VAL_INT_PLUS_MICRO; > > + default: > > + return -EINVAL; > > + } > > + default: > > + return -EINVAL; > > + } > > +} > > + > > +static const struct iio_info dmard06_info = { > > + .driver_module = THIS_MODULE, > > + .read_raw = dmard06_read_raw, > > +}; > > + > > +#define DMARD06_ACCEL_CHANNEL(_axis, reg) { \ > > maybe rename reg to _reg > > > + .type = IIO_ACCEL, \ > > + .address = reg, \ > > + .channel2 = IIO_MOD_##_axis, \ > > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ > > + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ > > + .modified = 1, \ > > +} > > + > > +#define DMARD06_TEMP_CHANNEL(reg) { \ > > + .type = IIO_TEMP, \ > > + .address = reg, \ > > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ > > + BIT(IIO_CHAN_INFO_OFFSET), \ > > +} > > + > > +static const struct iio_chan_spec dmard06_channels[] = { > > + DMARD06_ACCEL_CHANNEL(X, DMARD06_XOUT_REG), > > + DMARD06_ACCEL_CHANNEL(Y, DMARD06_YOUT_REG), > > + DMARD06_ACCEL_CHANNEL(Z, DMARD06_ZOUT_REG), > > + DMARD06_TEMP_CHANNEL(DMARD06_TOUT_REG), > > +}; > > + > > +static int dmard06_probe(struct i2c_client *client, > > + const struct i2c_device_id *id) > > +{ > > + int error; > > + struct iio_dev *indio_dev; > > + struct dmard06_data *dmard06; > > + > > + dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr); > > not needed > > > + > > + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { > > + dev_err(&client->dev, "I2C check functionality failed\n"); > > + return -ENXIO; > > + } > > + > > + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dmard06)); > > + if (!indio_dev) { > > + dev_err(&client->dev, "Failed to allocate iio device\n"); > > + return -ENOMEM; > > + } > > + > > + dmard06 = iio_priv(indio_dev); > > + dmard06->client = client; > > + > > + error = dmard06_read_chip_id(dmard06); > > + if (error) > > + return error; > > + > > + i2c_set_clientdata(client, indio_dev); > > + indio_dev->dev.parent = &client->dev; > > + indio_dev->name = DMARD06_DRV_NAME; > > + indio_dev->modes = INDIO_DIRECT_MODE; > > + indio_dev->channels = dmard06_channels; > > + indio_dev->num_channels = ARRAY_SIZE(dmard06_channels); > > + indio_dev->info = &dmard06_info; > > + > > + return devm_iio_device_register(&client->dev, indio_dev); > > +} > > + > > +static const struct i2c_device_id dmard06_id[] = { > > + { "dmard06", 0 }, > > + { } > > +}; > > +MODULE_DEVICE_TABLE(i2c, dmard06_id); > > + > > +static const struct of_device_id dmard06_of_match[] = { > > + { .compatible = "domintech,dmard06" }, > > + { } > > +}; > > +MODULE_DEVICE_TABLE(of, dmard06_of_match); > > + > > +static struct i2c_driver dmard06_driver = { > > + .probe = dmard06_probe, > > + .id_table = dmard06_id, > > + .driver = { > > + .name = DMARD06_DRV_NAME, > > + .of_match_table = of_match_ptr(dmard06_of_match), > > + }, > > +}; > > +module_i2c_driver(dmard06_driver); > > + > > +MODULE_AUTHOR("Aleksei Mamlin <mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>"); > > +MODULE_DESCRIPTION("Domintech DMARD06 accelerometer driver"); > > +MODULE_LICENSE("GPL v2"); > > > > -- > > Peter Meerwald-Stadler > +43-664-2444418 (mobile) -- Thanks and regards, Aleksei Mamlin ^ permalink raw reply [flat|nested] 23+ messages in thread
end of thread, other threads:[~2016-07-25 8:37 UTC | newest] Thread overview: 23+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-07-18 12:48 [PATCH 0/2] Add driver for Domintech DMARD06 accelerometer Aleksei Mamlin 2016-07-18 12:48 ` [PATCH 1/2] devicetree: bindings: Add vendor prefix for Domintech Co., Ltd Aleksei Mamlin 2016-07-20 1:09 ` Rob Herring 2016-07-18 12:48 ` [PATCH 2/2] input: misc: Add support for Domintech DMARD06 accelerometer Aleksei Mamlin 2016-07-18 12:48 ` Aleksei Mamlin 2016-07-20 0:02 ` Dmitry Torokhov 2016-07-21 6:13 ` Jonathan Cameron 2016-07-21 6:35 ` Aleksei Mamlin 2016-07-21 20:32 ` [PATCH 0/2] Add driver " Aleksei Mamlin 2016-07-21 20:32 ` Aleksei Mamlin 2016-07-21 20:32 ` [PATCH 1/2] devicetree: bindings: Add vendor prefix for Domintech Co., Ltd Aleksei Mamlin 2016-07-21 20:32 ` Aleksei Mamlin 2016-07-21 22:16 ` Rob Herring 2016-07-21 22:16 ` Rob Herring 2016-07-21 20:33 ` [PATCH 2/2] iio: accel: Add support for Domintech DMARD06 accelerometer Aleksei Mamlin 2016-07-21 22:19 ` Rob Herring 2016-07-21 22:41 ` Peter Meerwald-Stadler 2016-07-23 7:26 ` Jonathan Cameron 2016-07-23 7:26 ` Jonathan Cameron 2016-07-25 7:50 ` Aleksei Mamlin 2016-07-25 8:36 ` Peter Meerwald-Stadler 2016-07-23 21:49 ` Aleksei Mamlin 2016-07-23 21:49 ` Aleksei Mamlin
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.