* [PATCH v3 0/5] arm64: dts: r8a7795: Add HSUSB device node and enable channel 0 of USB2.0
@ 2016-07-21 10:46 ` Yoshihiro Shimoda
0 siblings, 0 replies; 14+ messages in thread
From: Yoshihiro Shimoda @ 2016-07-21 10:46 UTC (permalink / raw)
To: horms-/R6kz+dDXgpPR4JQBCEnsQ, magnus.damm-Re5JQEeQqe8AvxtiuMwx3w,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA, Yoshihiro Shimoda
This patch is based on the renesas.git / renesas-devel-20160718-v4.7-rc7 tag.
Changes from v2:
- rebase on renesas.git / renesas-devel-20160718-v4.7-rc7.
- maybe the panic issue disappears on the tree. but, if still happens,
please try the following patch:
https://git.kernel.org/cgit/linux/kernel/git/gregkh/usb.git/commit/?h=usb-next&id=c14f8a4032efa73d9c4e155add47c19252b3bdf4
- remove the redundant instruction in patch 4.
- add a new patch that enables HSUSB driver as kernel module on the defconfig.
Changes from v1:
- fix compatible string of hsusb in patch 1.
- fix patch 2 for "make dtbs W=1" warning.
Yoshihiro Shimoda (5):
arm64: dts: r8a7795: Add HSUSB device node
arm64: dts: salvator-x: enable usb2_phy of channel 0
arm64: dts: salvator-x: enable USB 2.0 Host channel 0
arm64: dts: salvator-x: enable HSUSB
arm64: defconfig: Add Renesas R-Car HSUSB driver support as module
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 36 ++++++++++++++++++++++
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 17 ++++++++++
arch/arm64/configs/defconfig | 2 ++
3 files changed, 55 insertions(+)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v3 0/5] arm64: dts: r8a7795: Add HSUSB device node and enable channel 0 of USB2.0
@ 2016-07-21 10:46 ` Yoshihiro Shimoda
0 siblings, 0 replies; 14+ messages in thread
From: Yoshihiro Shimoda @ 2016-07-21 10:46 UTC (permalink / raw)
To: horms, magnus.damm, robh+dt, mark.rutland
Cc: devicetree, linux-renesas-soc, Yoshihiro Shimoda
This patch is based on the renesas.git / renesas-devel-20160718-v4.7-rc7 tag.
Changes from v2:
- rebase on renesas.git / renesas-devel-20160718-v4.7-rc7.
- maybe the panic issue disappears on the tree. but, if still happens,
please try the following patch:
https://git.kernel.org/cgit/linux/kernel/git/gregkh/usb.git/commit/?h=usb-next&id=c14f8a4032efa73d9c4e155add47c19252b3bdf4
- remove the redundant instruction in patch 4.
- add a new patch that enables HSUSB driver as kernel module on the defconfig.
Changes from v1:
- fix compatible string of hsusb in patch 1.
- fix patch 2 for "make dtbs W=1" warning.
Yoshihiro Shimoda (5):
arm64: dts: r8a7795: Add HSUSB device node
arm64: dts: salvator-x: enable usb2_phy of channel 0
arm64: dts: salvator-x: enable USB 2.0 Host channel 0
arm64: dts: salvator-x: enable HSUSB
arm64: defconfig: Add Renesas R-Car HSUSB driver support as module
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 36 ++++++++++++++++++++++
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 17 ++++++++++
arch/arm64/configs/defconfig | 2 ++
3 files changed, 55 insertions(+)
--
1.9.1
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v3 1/5] arm64: dts: r8a7795: Add HSUSB device node
2016-07-21 10:46 ` Yoshihiro Shimoda
@ 2016-07-21 10:46 ` Yoshihiro Shimoda
-1 siblings, 0 replies; 14+ messages in thread
From: Yoshihiro Shimoda @ 2016-07-21 10:46 UTC (permalink / raw)
To: horms, magnus.damm, robh+dt, mark.rutland
Cc: devicetree, linux-renesas-soc, Yoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 99953ca..6f0a4ad 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -1224,6 +1224,23 @@
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
+
+ hsusb: usb@e6590000 {
+ compatible = "renesas,usbhs-r8a7795",
+ "renesas,rcar-gen3-usbhs";
+ reg = <0 0xe6590000 0 0x100>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 704>;
+ dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+ <&usb_dmac1 0>, <&usb_dmac1 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
+ renesas,buswait = <11>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
pciec0: pcie@fe000000 {
compatible = "renesas,pcie-r8a7795";
reg = <0 0xfe000000 0 0x80000>;
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v3 1/5] arm64: dts: r8a7795: Add HSUSB device node
@ 2016-07-21 10:46 ` Yoshihiro Shimoda
0 siblings, 0 replies; 14+ messages in thread
From: Yoshihiro Shimoda @ 2016-07-21 10:46 UTC (permalink / raw)
To: horms, magnus.damm, robh+dt, mark.rutland
Cc: devicetree, linux-renesas-soc, Yoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 99953ca..6f0a4ad 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -1224,6 +1224,23 @@
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
+
+ hsusb: usb@e6590000 {
+ compatible = "renesas,usbhs-r8a7795",
+ "renesas,rcar-gen3-usbhs";
+ reg = <0 0xe6590000 0 0x100>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 704>;
+ dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+ <&usb_dmac1 0>, <&usb_dmac1 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
+ renesas,buswait = <11>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
pciec0: pcie@fe000000 {
compatible = "renesas,pcie-r8a7795";
reg = <0 0xfe000000 0 0x80000>;
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v3 2/5] arm64: dts: salvator-x: enable usb2_phy of channel 0
2016-07-21 10:46 ` Yoshihiro Shimoda
@ 2016-07-21 10:46 ` Yoshihiro Shimoda
-1 siblings, 0 replies; 14+ messages in thread
From: Yoshihiro Shimoda @ 2016-07-21 10:46 UTC (permalink / raw)
To: horms, magnus.damm, robh+dt, mark.rutland
Cc: devicetree, linux-renesas-soc, Yoshihiro Shimoda
This patch also adds a regulator node for USB2.0 to handle VBUS on/off
by the phy-rcar-gen3-usb2 driver.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 24 ++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index 98f0263..8c8bfdc 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -110,6 +110,17 @@
1800000 0>;
};
+ vbus0_usb2: regulator-vbus0-usb2 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB20_VBUS0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
audio_clkout: audio_clkout {
/*
* This is same as <&rcar_sound 0>
@@ -193,6 +204,11 @@
function = "audio_clk";
};
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
usb1_pins: usb1 {
groups = "usb1";
function = "usb1";
@@ -369,6 +385,14 @@
status = "okay";
};
+&usb2_phy0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+
+ vbus-supply = <&vbus0_usb2>;
+ status = "okay";
+};
+
&usb2_phy1 {
pinctrl-0 = <&usb1_pins>;
pinctrl-names = "default";
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v3 2/5] arm64: dts: salvator-x: enable usb2_phy of channel 0
@ 2016-07-21 10:46 ` Yoshihiro Shimoda
0 siblings, 0 replies; 14+ messages in thread
From: Yoshihiro Shimoda @ 2016-07-21 10:46 UTC (permalink / raw)
To: horms, magnus.damm, robh+dt, mark.rutland
Cc: devicetree, linux-renesas-soc, Yoshihiro Shimoda
This patch also adds a regulator node for USB2.0 to handle VBUS on/off
by the phy-rcar-gen3-usb2 driver.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 24 ++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index 98f0263..8c8bfdc 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -110,6 +110,17 @@
1800000 0>;
};
+ vbus0_usb2: regulator-vbus0-usb2 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB20_VBUS0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
audio_clkout: audio_clkout {
/*
* This is same as <&rcar_sound 0>
@@ -193,6 +204,11 @@
function = "audio_clk";
};
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
usb1_pins: usb1 {
groups = "usb1";
function = "usb1";
@@ -369,6 +385,14 @@
status = "okay";
};
+&usb2_phy0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+
+ vbus-supply = <&vbus0_usb2>;
+ status = "okay";
+};
+
&usb2_phy1 {
pinctrl-0 = <&usb1_pins>;
pinctrl-names = "default";
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v3 3/5] arm64: dts: salvator-x: enable USB 2.0 Host channel 0
2016-07-21 10:46 ` Yoshihiro Shimoda
@ 2016-07-21 10:46 ` Yoshihiro Shimoda
-1 siblings, 0 replies; 14+ messages in thread
From: Yoshihiro Shimoda @ 2016-07-21 10:46 UTC (permalink / raw)
To: horms, magnus.damm, robh+dt, mark.rutland
Cc: devicetree, linux-renesas-soc, Yoshihiro Shimoda
We have to set SW15 to pin 2-3 side on the board before we use CN9
as USB host or peripheral.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index 8c8bfdc..c0e6e8f 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -407,6 +407,10 @@
status = "okay";
};
+&ehci0 {
+ status = "okay";
+};
+
&ehci1 {
status = "okay";
};
@@ -415,6 +419,10 @@
status = "okay";
};
+&ohci0 {
+ status = "okay";
+};
+
&ohci1 {
status = "okay";
};
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v3 3/5] arm64: dts: salvator-x: enable USB 2.0 Host channel 0
@ 2016-07-21 10:46 ` Yoshihiro Shimoda
0 siblings, 0 replies; 14+ messages in thread
From: Yoshihiro Shimoda @ 2016-07-21 10:46 UTC (permalink / raw)
To: horms, magnus.damm, robh+dt, mark.rutland
Cc: devicetree, linux-renesas-soc, Yoshihiro Shimoda
We have to set SW15 to pin 2-3 side on the board before we use CN9
as USB host or peripheral.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index 8c8bfdc..c0e6e8f 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -407,6 +407,10 @@
status = "okay";
};
+&ehci0 {
+ status = "okay";
+};
+
&ehci1 {
status = "okay";
};
@@ -415,6 +419,10 @@
status = "okay";
};
+&ohci0 {
+ status = "okay";
+};
+
&ohci1 {
status = "okay";
};
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v3 4/5] arm64: dts: salvator-x: enable HSUSB
2016-07-21 10:46 ` Yoshihiro Shimoda
@ 2016-07-21 10:47 ` Yoshihiro Shimoda
-1 siblings, 0 replies; 14+ messages in thread
From: Yoshihiro Shimoda @ 2016-07-21 10:47 UTC (permalink / raw)
To: horms, magnus.damm, robh+dt, mark.rutland
Cc: devicetree, linux-renesas-soc, Yoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index c0e6e8f..4332ec7 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -431,6 +431,10 @@
status = "okay";
};
+&hsusb {
+ status = "okay";
+};
+
&pcie_bus_clk {
clock-frequency = <100000000>;
status = "okay";
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v3 4/5] arm64: dts: salvator-x: enable HSUSB
@ 2016-07-21 10:47 ` Yoshihiro Shimoda
0 siblings, 0 replies; 14+ messages in thread
From: Yoshihiro Shimoda @ 2016-07-21 10:47 UTC (permalink / raw)
To: horms, magnus.damm, robh+dt, mark.rutland
Cc: devicetree, linux-renesas-soc, Yoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index c0e6e8f..4332ec7 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -431,6 +431,10 @@
status = "okay";
};
+&hsusb {
+ status = "okay";
+};
+
&pcie_bus_clk {
clock-frequency = <100000000>;
status = "okay";
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v3 5/5] arm64: defconfig: Add Renesas R-Car HSUSB driver support as module
2016-07-21 10:46 ` Yoshihiro Shimoda
@ 2016-07-21 10:47 ` Yoshihiro Shimoda
-1 siblings, 0 replies; 14+ messages in thread
From: Yoshihiro Shimoda @ 2016-07-21 10:47 UTC (permalink / raw)
To: horms, magnus.damm, robh+dt, mark.rutland
Cc: devicetree, linux-renesas-soc, Yoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
arch/arm64/configs/defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index aa47366..9d23ff9 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -232,6 +232,7 @@ CONFIG_USB_EHCI_MSM=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_RENESAS_USBHS=m
CONFIG_USB_STORAGE=y
CONFIG_USB_DWC2=y
CONFIG_USB_CHIPIDEA=y
@@ -242,6 +243,7 @@ CONFIG_USB_HSIC_USB3503=y
CONFIG_USB_MSM_OTG=y
CONFIG_USB_ULPI=y
CONFIG_USB_GADGET=y
+CONFIG_USB_RENESAS_USBHS_UDC=m
CONFIG_MMC=y
CONFIG_MMC_BLOCK_MINORS=32
CONFIG_MMC_ARMMMCI=y
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v3 5/5] arm64: defconfig: Add Renesas R-Car HSUSB driver support as module
@ 2016-07-21 10:47 ` Yoshihiro Shimoda
0 siblings, 0 replies; 14+ messages in thread
From: Yoshihiro Shimoda @ 2016-07-21 10:47 UTC (permalink / raw)
To: horms, magnus.damm, robh+dt, mark.rutland
Cc: devicetree, linux-renesas-soc, Yoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
arch/arm64/configs/defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index aa47366..9d23ff9 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -232,6 +232,7 @@ CONFIG_USB_EHCI_MSM=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_RENESAS_USBHS=m
CONFIG_USB_STORAGE=y
CONFIG_USB_DWC2=y
CONFIG_USB_CHIPIDEA=y
@@ -242,6 +243,7 @@ CONFIG_USB_HSIC_USB3503=y
CONFIG_USB_MSM_OTG=y
CONFIG_USB_ULPI=y
CONFIG_USB_GADGET=y
+CONFIG_USB_RENESAS_USBHS_UDC=m
CONFIG_MMC=y
CONFIG_MMC_BLOCK_MINORS=32
CONFIG_MMC_ARMMMCI=y
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH v3 0/5] arm64: dts: r8a7795: Add HSUSB device node and enable channel 0 of USB2.0
2016-07-21 10:46 ` Yoshihiro Shimoda
` (5 preceding siblings ...)
(?)
@ 2016-08-10 8:45 ` Simon Horman
2016-08-11 2:15 ` Yoshihiro Shimoda
-1 siblings, 1 reply; 14+ messages in thread
From: Simon Horman @ 2016-08-10 8:45 UTC (permalink / raw)
To: Yoshihiro Shimoda
Cc: magnus.damm, robh+dt, mark.rutland, devicetree, linux-renesas-soc
Hi Shimoda-san,
On Thu, Jul 21, 2016 at 07:46:56PM +0900, Yoshihiro Shimoda wrote:
> This patch is based on the renesas.git / renesas-devel-20160718-v4.7-rc7 tag.
>
> Changes from v2:
> - rebase on renesas.git / renesas-devel-20160718-v4.7-rc7.
> - maybe the panic issue disappears on the tree. but, if still happens,
> please try the following patch:
> https://git.kernel.org/cgit/linux/kernel/git/gregkh/usb.git/commit/?h=usb-next&id=c14f8a4032efa73d9c4e155add47c19252b3bdf4
> - remove the redundant instruction in patch 4.
> - add a new patch that enables HSUSB driver as kernel module on the defconfig.
Sorry for not attending to this earlier.
In your opinion are these patches ready to merge?
^ permalink raw reply [flat|nested] 14+ messages in thread
* RE: [PATCH v3 0/5] arm64: dts: r8a7795: Add HSUSB device node and enable channel 0 of USB2.0
2016-08-10 8:45 ` [PATCH v3 0/5] arm64: dts: r8a7795: Add HSUSB device node and enable channel 0 of USB2.0 Simon Horman
@ 2016-08-11 2:15 ` Yoshihiro Shimoda
0 siblings, 0 replies; 14+ messages in thread
From: Yoshihiro Shimoda @ 2016-08-11 2:15 UTC (permalink / raw)
To: Simon Horman
Cc: magnus.damm, robh+dt, mark.rutland, devicetree, linux-renesas-soc
Hi Simon-san,
> From: Simon Horman [mailto:horms@verge.net.au]
> Sent: Wednesday, August 10, 2016 5:46 PM
>
> Hi Shimoda-san,
>
> On Thu, Jul 21, 2016 at 07:46:56PM +0900, Yoshihiro Shimoda wrote:
> > This patch is based on the renesas.git / renesas-devel-20160718-v4.7-rc7 tag.
> >
> > Changes from v2:
> > - rebase on renesas.git / renesas-devel-20160718-v4.7-rc7.
> > - maybe the panic issue disappears on the tree. but, if still happens,
> > please try the following patch:
> >
> https://git.kernel.org/cgit/linux/kernel/git/gregkh/usb.git/commit/?h=usb-next&id=c14f8a4032efa73d9c4e155add47c19252
> b3bdf4
> > - remove the redundant instruction in patch 4.
> > - add a new patch that enables HSUSB driver as kernel module on the defconfig.
>
> Sorry for not attending to this earlier.
> In your opinion are these patches ready to merge?
Yes. Since the following patch had been merged in v4.8-rc1, the panic issue disappears.
> https://git.kernel.org/cgit/linux/kernel/git/gregkh/usb.git/commit/?h=usb-next&id=c14f8a4032efa73d9c4e155add47c19252
> b3bdf4
Best regards,
Yoshihiro Shimoda
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2016-08-11 2:15 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-07-21 10:46 [PATCH v3 0/5] arm64: dts: r8a7795: Add HSUSB device node and enable channel 0 of USB2.0 Yoshihiro Shimoda
2016-07-21 10:46 ` Yoshihiro Shimoda
2016-07-21 10:46 ` [PATCH v3 1/5] arm64: dts: r8a7795: Add HSUSB device node Yoshihiro Shimoda
2016-07-21 10:46 ` Yoshihiro Shimoda
2016-07-21 10:46 ` [PATCH v3 2/5] arm64: dts: salvator-x: enable usb2_phy of channel 0 Yoshihiro Shimoda
2016-07-21 10:46 ` Yoshihiro Shimoda
2016-07-21 10:46 ` [PATCH v3 3/5] arm64: dts: salvator-x: enable USB 2.0 Host " Yoshihiro Shimoda
2016-07-21 10:46 ` Yoshihiro Shimoda
2016-07-21 10:47 ` [PATCH v3 4/5] arm64: dts: salvator-x: enable HSUSB Yoshihiro Shimoda
2016-07-21 10:47 ` Yoshihiro Shimoda
2016-07-21 10:47 ` [PATCH v3 5/5] arm64: defconfig: Add Renesas R-Car HSUSB driver support as module Yoshihiro Shimoda
2016-07-21 10:47 ` Yoshihiro Shimoda
2016-08-10 8:45 ` [PATCH v3 0/5] arm64: dts: r8a7795: Add HSUSB device node and enable channel 0 of USB2.0 Simon Horman
2016-08-11 2:15 ` Yoshihiro Shimoda
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.