All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rajendra Nayak <rnayak@codeaurora.org>
To: sboyd@codeaurora.org, mturquette@baylibre.com
Cc: linux-clk@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org, tdas@codeaurora.org,
	Rajendra Nayak <rnayak@codeaurora.org>
Subject: [PATCH v2 02/10] clk: qcom: Add support for alpha pll hwfsm ops
Date: Thu, 11 Aug 2016 14:10:50 +0530	[thread overview]
Message-ID: <1470904858-11930-3-git-send-email-rnayak@codeaurora.org> (raw)
In-Reply-To: <1470904858-11930-1-git-send-email-rnayak@codeaurora.org>

Add support to enable/disable the alpha pll using hwfsm

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
 drivers/clk/qcom/clk-alpha-pll.c | 109 ++++++++++++++++++++++++++++++++++-----
 drivers/clk/qcom/clk-alpha-pll.h |   1 +
 2 files changed, 98 insertions(+), 12 deletions(-)

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index e6a03ea..bae31f9 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -62,9 +62,10 @@
 #define to_clk_alpha_pll_postdiv(_hw) container_of(to_clk_regmap(_hw), \
 					   struct clk_alpha_pll_postdiv, clkr)
 
-static int wait_for_pll(struct clk_alpha_pll *pll)
+static int wait_for_pll(struct clk_alpha_pll *pll, u32 mask, bool inverse,
+			const char *action)
 {
-	u32 val, mask, off;
+	u32 val, off;
 	int count;
 	int ret;
 	const char *name = clk_hw_get_name(&pll->clkr.hw);
@@ -74,26 +75,101 @@ static int wait_for_pll(struct clk_alpha_pll *pll)
 	if (ret)
 		return ret;
 
-	if (val & PLL_VOTE_FSM_ENA)
-		mask = PLL_ACTIVE_FLAG;
-	else
-		mask = PLL_LOCK_DET;
-
-	/* Wait for pll to enable. */
 	for (count = 100; count > 0; count--) {
 		ret = regmap_read(pll->clkr.regmap, off + PLL_MODE, &val);
 		if (ret)
 			return ret;
-		if ((val & mask) == mask)
+		if (inverse && (val & mask))
+			return 0;
+		else if ((val & mask) == mask)
 			return 0;
 
 		udelay(1);
 	}
 
-	WARN(1, "%s didn't enable after voting for it!\n", name);
+	WARN(1, "%s failed to %s!\n", name, action);
 	return -ETIMEDOUT;
 }
 
+static int wait_for_pll_enable(struct clk_alpha_pll *pll, u32 mask)
+{
+	return wait_for_pll(pll, mask, 0, "enable");
+}
+
+static int wait_for_pll_disable(struct clk_alpha_pll *pll, u32 mask)
+{
+	return wait_for_pll(pll, mask, 1, "disable");
+}
+
+static int wait_for_pll_offline(struct clk_alpha_pll *pll, u32 mask)
+{
+	return wait_for_pll(pll, mask, 0, "offline");
+}
+
+/* alpha pll with hwfsm support */
+#define PLL_OFFLINE_REQ		BIT(7)
+#define PLL_FSM_ENA		BIT(20)
+#define PLL_OFFLINE_ACK		BIT(28)
+#define PLL_ACTIVE_FLAG		BIT(30)
+
+static int clk_alpha_pll_hwfsm_enable(struct clk_hw *hw)
+{
+	int ret;
+	u32 val, off;
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+
+	off = pll->offset;
+	ret = regmap_read(pll->clkr.regmap, off + PLL_MODE, &val);
+	if (ret)
+		return ret;
+
+	/* Enable HW FSM mode, clear OFFLINE request */
+	val |= PLL_FSM_ENA;
+	val &= ~PLL_OFFLINE_REQ;
+	ret = regmap_write(pll->clkr.regmap, off + PLL_MODE, val);
+	if (ret)
+		return ret;
+
+	/* Make sure enable request goes through before waiting for update */
+	mb();
+
+	ret = wait_for_pll_enable(pll, PLL_ACTIVE_FLAG);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void clk_alpha_pll_hwfsm_disable(struct clk_hw *hw)
+{
+	int ret;
+	u32 val, off;
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+
+	off = pll->offset;
+	ret = regmap_read(pll->clkr.regmap, off + PLL_MODE, &val);
+	if (ret)
+		return;
+
+	/* Request PLL_OFFLINE and wait for ack */
+	ret = regmap_update_bits(pll->clkr.regmap, off + PLL_MODE,
+				 PLL_OFFLINE_REQ, PLL_OFFLINE_REQ);
+	if (ret)
+		return;
+
+	ret = wait_for_pll_offline(pll, PLL_OFFLINE_ACK);
+	if (ret)
+		return;
+
+	/* Disable hwfsm */
+	ret = regmap_update_bits(pll->clkr.regmap, off + PLL_MODE,
+				 PLL_FSM_ENA, 0);
+	if (ret)
+		return;
+
+	wait_for_pll_disable(pll, PLL_ACTIVE_FLAG);
+}
+
 static int clk_alpha_pll_enable(struct clk_hw *hw)
 {
 	int ret;
@@ -112,7 +188,7 @@ static int clk_alpha_pll_enable(struct clk_hw *hw)
 		ret = clk_enable_regmap(hw);
 		if (ret)
 			return ret;
-		return wait_for_pll(pll);
+		return wait_for_pll_enable(pll, PLL_ACTIVE_FLAG);
 	}
 
 	/* Skip if already enabled */
@@ -136,7 +212,7 @@ static int clk_alpha_pll_enable(struct clk_hw *hw)
 	if (ret)
 		return ret;
 
-	ret = wait_for_pll(pll);
+	ret = wait_for_pll_enable(pll, PLL_LOCK_DET);
 	if (ret)
 		return ret;
 
@@ -300,6 +376,15 @@ const struct clk_ops clk_alpha_pll_ops = {
 };
 EXPORT_SYMBOL_GPL(clk_alpha_pll_ops);
 
+const struct clk_ops clk_alpha_pll_hwfsm_ops = {
+	.enable = clk_alpha_pll_hwfsm_enable,
+	.disable = clk_alpha_pll_hwfsm_disable,
+	.recalc_rate = clk_alpha_pll_recalc_rate,
+	.round_rate = clk_alpha_pll_round_rate,
+	.set_rate = clk_alpha_pll_set_rate,
+};
+EXPORT_SYMBOL_GPL(clk_alpha_pll_hwfsm_ops);
+
 static unsigned long
 clk_alpha_pll_postdiv_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 {
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index 90ce201..f78bf4c 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -52,6 +52,7 @@ struct clk_alpha_pll_postdiv {
 };
 
 extern const struct clk_ops clk_alpha_pll_ops;
+extern const struct clk_ops clk_alpha_pll_hwfsm_ops;
 extern const struct clk_ops clk_alpha_pll_postdiv_ops;
 
 #endif
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

  parent reply	other threads:[~2016-08-11  8:40 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-11  8:40 [PATCH v2 00/10] clk: qcom: PLL updates Rajendra Nayak
2016-08-11  8:40 ` [PATCH v2 01/10] clk: Fix inconsistencies in usage of data types Rajendra Nayak
2016-08-13  0:59   ` Stephen Boyd
2016-08-11  8:40 ` Rajendra Nayak [this message]
2016-08-24  6:13   ` [PATCH v2 02/10] clk: qcom: Add support for alpha pll hwfsm ops Stephen Boyd
2016-08-25  9:05     ` Rajendra Nayak
2016-08-11  8:40 ` [PATCH v2 03/10] clk: qcom: Add support to initialize alpha plls Rajendra Nayak
2016-08-11  8:40 ` [PATCH v2 04/10] clk: qcom: Add support for PLLs with alpha mode Rajendra Nayak
2016-08-24  6:15   ` Stephen Boyd
2016-08-25  9:12     ` Rajendra Nayak
2016-08-11  8:40 ` [PATCH v2 05/10] clk: qcom: Add support for PLLs with early output Rajendra Nayak
2016-08-11  8:40 ` [PATCH v2 06/10] clk: qcom: Add support for PLLs supporting dynamic reprogramming Rajendra Nayak
2016-08-11  8:40 ` [PATCH v2 07/10] clk: qcom: Add support to enable FSM mode for votable alpha PLLs Rajendra Nayak
2016-08-24  6:31   ` Stephen Boyd
2016-08-25  9:16     ` Rajendra Nayak
2016-08-11  8:40 ` [PATCH v2 08/10] clk: qcom: Cleanup some macro defs Rajendra Nayak
2016-08-13  0:57   ` Stephen Boyd
2016-08-11  8:40 ` [PATCH v2 09/10] clk: qcom: Add .is_enabled ops for clk-alpha-pll Rajendra Nayak
2016-08-24  6:28   ` Stephen Boyd
2016-08-25  9:15     ` Rajendra Nayak
2016-08-11  8:40 ` [PATCH v2 10/10] clk: qcom: Fix .set_rate to handle alpha PLLs w/wo dynamic update Rajendra Nayak
2016-08-24  6:26   ` Stephen Boyd
2016-08-25  9:13     ` Rajendra Nayak
2016-08-24  6:17 ` [PATCH v2 00/10] clk: qcom: PLL updates Stephen Boyd
2016-08-25  9:17   ` Rajendra Nayak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1470904858-11930-3-git-send-email-rnayak@codeaurora.org \
    --to=rnayak@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=sboyd@codeaurora.org \
    --cc=tdas@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.