* [PATCH v4 1/4] mfd: pm8921: Add support for pm8018
2016-08-11 13:16 ` Neil Armstrong
(?)
@ 2016-08-11 13:16 ` Neil Armstrong
-1 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2016-08-11 13:16 UTC (permalink / raw)
To: andy.gross-QSEj5FYQhm4dnm+yROfE0A,
david.brown-QSEj5FYQhm4dnm+yROfE0A,
lee.jones-QSEj5FYQhm4dnm+yROfE0A,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w, broonie-DgEjT+Ai2ygdnm+yROfE0A,
a.zummo-BfzFCNDTiLLj+vYz1yj4TQ,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8
Cc: Neil Armstrong, linux-input-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA,
linux-soc-u79uwXL29TY76Z2rM5mHXA,
rtc-linux-/JYPxA39Uh5TLH3MbocFFw
In order to support the Qualcomm MDM9615 PMIC, add support for the
pm8018 in pm8921 mfd driver.
Reviewed-by: Bjorn Andersson <bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Acked-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
drivers/mfd/pm8921-core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mfd/pm8921-core.c b/drivers/mfd/pm8921-core.c
index 1b7ec08..0e3a2ea 100644
--- a/drivers/mfd/pm8921-core.c
+++ b/drivers/mfd/pm8921-core.c
@@ -309,6 +309,7 @@ static const struct regmap_config ssbi_regmap_config = {
};
static const struct of_device_id pm8921_id_table[] = {
+ { .compatible = "qcom,pm8018", },
{ .compatible = "qcom,pm8058", },
{ .compatible = "qcom,pm8921", },
{ }
--
1.9.1
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply related [flat|nested] 21+ messages in thread* [rtc-linux] [PATCH v4 1/4] mfd: pm8921: Add support for pm8018
@ 2016-08-11 13:16 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2016-08-11 13:16 UTC (permalink / raw)
To: andy.gross, david.brown, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni
Cc: Neil Armstrong, linux-input, linux-kernel, linux-arm-msm,
linux-soc, rtc-linux
In order to support the Qualcomm MDM9615 PMIC, add support for the
pm8018 in pm8921 mfd driver.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/mfd/pm8921-core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mfd/pm8921-core.c b/drivers/mfd/pm8921-core.c
index 1b7ec08..0e3a2ea 100644
--- a/drivers/mfd/pm8921-core.c
+++ b/drivers/mfd/pm8921-core.c
@@ -309,6 +309,7 @@ static const struct regmap_config ssbi_regmap_config = {
};
static const struct of_device_id pm8921_id_table[] = {
+ { .compatible = "qcom,pm8018", },
{ .compatible = "qcom,pm8058", },
{ .compatible = "qcom,pm8921", },
{ }
--
1.9.1
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v4 1/4] mfd: pm8921: Add support for pm8018
@ 2016-08-11 13:16 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2016-08-11 13:16 UTC (permalink / raw)
To: andy.gross, david.brown, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni
Cc: Neil Armstrong, linux-input, linux-kernel, linux-arm-msm,
linux-soc, rtc-linux
In order to support the Qualcomm MDM9615 PMIC, add support for the
pm8018 in pm8921 mfd driver.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/mfd/pm8921-core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mfd/pm8921-core.c b/drivers/mfd/pm8921-core.c
index 1b7ec08..0e3a2ea 100644
--- a/drivers/mfd/pm8921-core.c
+++ b/drivers/mfd/pm8921-core.c
@@ -309,6 +309,7 @@ static const struct regmap_config ssbi_regmap_config = {
};
static const struct of_device_id pm8921_id_table[] = {
+ { .compatible = "qcom,pm8018", },
{ .compatible = "qcom,pm8058", },
{ .compatible = "qcom,pm8921", },
{ }
--
1.9.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v4 2/4] rtc: rtc-pm8xxx: Add support for pm8018 rtc
2016-08-11 13:16 ` Neil Armstrong
(?)
@ 2016-08-11 13:16 ` Neil Armstrong
-1 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2016-08-11 13:16 UTC (permalink / raw)
To: andy.gross-QSEj5FYQhm4dnm+yROfE0A,
david.brown-QSEj5FYQhm4dnm+yROfE0A,
lee.jones-QSEj5FYQhm4dnm+yROfE0A,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w, broonie-DgEjT+Ai2ygdnm+yROfE0A,
a.zummo-BfzFCNDTiLLj+vYz1yj4TQ,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8
Cc: Neil Armstrong, linux-input-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA,
linux-soc-u79uwXL29TY76Z2rM5mHXA,
rtc-linux-/JYPxA39Uh5TLH3MbocFFw
In order to support RTC on Qualcomm MDM9615 SoC, add support for
the pm8018 rtc in rtc-pm8xxx driver.
Reviewed-by: Bjorn Andersson <bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Acked-by: Alexandre Belloni <alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Signed-off-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt | 1 +
drivers/rtc/rtc-pm8xxx.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
index f24f334..37a088f 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
@@ -62,6 +62,7 @@ The below bindings specify the set of valid subnodes.
"qcom,pm8058-rtc"
"qcom,pm8921-rtc"
"qcom,pm8941-rtc"
+ "qcom,pm8018-rtc"
- reg:
Usage: required
diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c
index 795fcbd..fac8355 100644
--- a/drivers/rtc/rtc-pm8xxx.c
+++ b/drivers/rtc/rtc-pm8xxx.c
@@ -428,6 +428,7 @@ static const struct pm8xxx_rtc_regs pm8941_regs = {
*/
static const struct of_device_id pm8xxx_id_table[] = {
{ .compatible = "qcom,pm8921-rtc", .data = &pm8921_regs },
+ { .compatible = "qcom,pm8018-rtc", .data = &pm8921_regs },
{ .compatible = "qcom,pm8058-rtc", .data = &pm8058_regs },
{ .compatible = "qcom,pm8941-rtc", .data = &pm8941_regs },
{ },
--
1.9.1
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply related [flat|nested] 21+ messages in thread* [rtc-linux] [PATCH v4 2/4] rtc: rtc-pm8xxx: Add support for pm8018 rtc
@ 2016-08-11 13:16 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2016-08-11 13:16 UTC (permalink / raw)
To: andy.gross, david.brown, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni
Cc: Neil Armstrong, linux-input, linux-kernel, linux-arm-msm,
linux-soc, rtc-linux
In order to support RTC on Qualcomm MDM9615 SoC, add support for
the pm8018 rtc in rtc-pm8xxx driver.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt | 1 +
drivers/rtc/rtc-pm8xxx.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
index f24f334..37a088f 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
@@ -62,6 +62,7 @@ The below bindings specify the set of valid subnodes.
"qcom,pm8058-rtc"
"qcom,pm8921-rtc"
"qcom,pm8941-rtc"
+ "qcom,pm8018-rtc"
- reg:
Usage: required
diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c
index 795fcbd..fac8355 100644
--- a/drivers/rtc/rtc-pm8xxx.c
+++ b/drivers/rtc/rtc-pm8xxx.c
@@ -428,6 +428,7 @@ static const struct pm8xxx_rtc_regs pm8941_regs = {
*/
static const struct of_device_id pm8xxx_id_table[] = {
{ .compatible = "qcom,pm8921-rtc", .data = &pm8921_regs },
+ { .compatible = "qcom,pm8018-rtc", .data = &pm8921_regs },
{ .compatible = "qcom,pm8058-rtc", .data = &pm8058_regs },
{ .compatible = "qcom,pm8941-rtc", .data = &pm8941_regs },
{ },
--
1.9.1
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v4 2/4] rtc: rtc-pm8xxx: Add support for pm8018 rtc
@ 2016-08-11 13:16 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2016-08-11 13:16 UTC (permalink / raw)
To: andy.gross, david.brown, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni
Cc: Neil Armstrong, linux-input, linux-kernel, linux-arm-msm,
linux-soc, rtc-linux
In order to support RTC on Qualcomm MDM9615 SoC, add support for
the pm8018 rtc in rtc-pm8xxx driver.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt | 1 +
drivers/rtc/rtc-pm8xxx.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
index f24f334..37a088f 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
@@ -62,6 +62,7 @@ The below bindings specify the set of valid subnodes.
"qcom,pm8058-rtc"
"qcom,pm8921-rtc"
"qcom,pm8941-rtc"
+ "qcom,pm8018-rtc"
- reg:
Usage: required
diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c
index 795fcbd..fac8355 100644
--- a/drivers/rtc/rtc-pm8xxx.c
+++ b/drivers/rtc/rtc-pm8xxx.c
@@ -428,6 +428,7 @@ static const struct pm8xxx_rtc_regs pm8941_regs = {
*/
static const struct of_device_id pm8xxx_id_table[] = {
{ .compatible = "qcom,pm8921-rtc", .data = &pm8921_regs },
+ { .compatible = "qcom,pm8018-rtc", .data = &pm8921_regs },
{ .compatible = "qcom,pm8058-rtc", .data = &pm8058_regs },
{ .compatible = "qcom,pm8941-rtc", .data = &pm8941_regs },
{ },
--
1.9.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v4 3/4] mfd: qcom-rpm: Add support for pm8018 RPM Regulator
2016-08-11 13:16 ` Neil Armstrong
(?)
@ 2016-08-11 13:16 ` Neil Armstrong
-1 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2016-08-11 13:16 UTC (permalink / raw)
To: andy.gross-QSEj5FYQhm4dnm+yROfE0A,
david.brown-QSEj5FYQhm4dnm+yROfE0A,
lee.jones-QSEj5FYQhm4dnm+yROfE0A,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w, broonie-DgEjT+Ai2ygdnm+yROfE0A,
a.zummo-BfzFCNDTiLLj+vYz1yj4TQ,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8
Cc: Neil Armstrong, linux-input-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA,
linux-soc-u79uwXL29TY76Z2rM5mHXA,
rtc-linux-/JYPxA39Uh5TLH3MbocFFw
In order to support the Qualcomm MDM9615 SoC, add support for the
RPM regulator entries in the qcom-rpm driver.
Acked-by: Bjorn Andersson <bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Acked-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 1 +
drivers/mfd/qcom_rpm.c | 51 ++++++++++++++++++++++
include/dt-bindings/mfd/qcom-rpm.h | 22 ++++++++++
3 files changed, 74 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
index b98b291..72d68d4 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
@@ -13,6 +13,7 @@ frequencies.
"qcom,rpm-msm8660"
"qcom,rpm-msm8960"
"qcom,rpm-ipq8064"
+ "qcom,rpm-mdm9615"
- reg:
Usage: required
diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
index 2e44323..a74210d 100644
--- a/drivers/mfd/qcom_rpm.c
+++ b/drivers/mfd/qcom_rpm.c
@@ -388,11 +388,62 @@ static const struct qcom_rpm_data ipq806x_template = {
.ack_sel_size = 7,
};
+static const struct qcom_rpm_resource mdm9615_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 26, 10, 9, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 27, 11, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 28, 12, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 29, 13, 13, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 30, 14, 16, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 31, 15, 22, 2 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 33, 16, 23, 3 },
+ [QCOM_RPM_APPS_FABRIC_IOCTL] = { 36, 17, 24, 1 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 37, 18, 25, 27 },
+ [QCOM_RPM_PM8018_SMPS1] = { 64, 19, 30, 2 },
+ [QCOM_RPM_PM8018_SMPS2] = { 66, 21, 31, 2 },
+ [QCOM_RPM_PM8018_SMPS3] = { 68, 23, 32, 2 },
+ [QCOM_RPM_PM8018_SMPS4] = { 70, 25, 33, 2 },
+ [QCOM_RPM_PM8018_SMPS5] = { 72, 27, 34, 2 },
+ [QCOM_RPM_PM8018_LDO1] = { 74, 29, 35, 2 },
+ [QCOM_RPM_PM8018_LDO2] = { 76, 31, 36, 2 },
+ [QCOM_RPM_PM8018_LDO3] = { 78, 33, 37, 2 },
+ [QCOM_RPM_PM8018_LDO4] = { 80, 35, 38, 2 },
+ [QCOM_RPM_PM8018_LDO5] = { 82, 37, 39, 2 },
+ [QCOM_RPM_PM8018_LDO6] = { 84, 39, 40, 2 },
+ [QCOM_RPM_PM8018_LDO7] = { 86, 41, 41, 2 },
+ [QCOM_RPM_PM8018_LDO8] = { 88, 43, 42, 2 },
+ [QCOM_RPM_PM8018_LDO9] = { 90, 45, 43, 2 },
+ [QCOM_RPM_PM8018_LDO10] = { 92, 47, 44, 2 },
+ [QCOM_RPM_PM8018_LDO11] = { 94, 49, 45, 2 },
+ [QCOM_RPM_PM8018_LDO12] = { 96, 51, 46, 2 },
+ [QCOM_RPM_PM8018_LDO13] = { 98, 53, 47, 2 },
+ [QCOM_RPM_PM8018_LDO14] = { 100, 55, 48, 2 },
+ [QCOM_RPM_PM8018_LVS1] = { 102, 57, 49, 1 },
+ [QCOM_RPM_PM8018_NCP] = { 103, 58, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 105, 60, 81, 1 },
+ [QCOM_RPM_USB_OTG_SWITCH] = { 106, 61, 82, 1 },
+ [QCOM_RPM_HDMI_SWITCH] = { 107, 62, 83, 1 },
+ [QCOM_RPM_VOLTAGE_CORNER] = { 109, 64, 87, 1 },
+};
+
+static const struct qcom_rpm_data mdm9615_template = {
+ .version = 3,
+ .resource_table = mdm9615_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(mdm9615_rpm_resource_table),
+ .req_ctx_off = 3,
+ .req_sel_off = 11,
+ .ack_ctx_off = 15,
+ .ack_sel_off = 23,
+ .req_sel_size = 4,
+ .ack_sel_size = 7,
+};
+
static const struct of_device_id qcom_rpm_of_match[] = {
{ .compatible = "qcom,rpm-apq8064", .data = &apq8064_template },
{ .compatible = "qcom,rpm-msm8660", .data = &msm8660_template },
{ .compatible = "qcom,rpm-msm8960", .data = &msm8960_template },
{ .compatible = "qcom,rpm-ipq8064", .data = &ipq806x_template },
+ { .compatible = "qcom,rpm-mdm9615", .data = &mdm9615_template },
{ }
};
MODULE_DEVICE_TABLE(of, qcom_rpm_of_match);
diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h
index 13a9d4b..54aef5e 100644
--- a/include/dt-bindings/mfd/qcom-rpm.h
+++ b/include/dt-bindings/mfd/qcom-rpm.h
@@ -147,6 +147,28 @@
#define QCOM_RPM_SMB208_S1b 137
#define QCOM_RPM_SMB208_S2a 138
#define QCOM_RPM_SMB208_S2b 139
+#define QCOM_RPM_PM8018_SMPS1 140
+#define QCOM_RPM_PM8018_SMPS2 141
+#define QCOM_RPM_PM8018_SMPS3 142
+#define QCOM_RPM_PM8018_SMPS4 143
+#define QCOM_RPM_PM8018_SMPS5 144
+#define QCOM_RPM_PM8018_LDO1 145
+#define QCOM_RPM_PM8018_LDO2 146
+#define QCOM_RPM_PM8018_LDO3 147
+#define QCOM_RPM_PM8018_LDO4 148
+#define QCOM_RPM_PM8018_LDO5 149
+#define QCOM_RPM_PM8018_LDO6 150
+#define QCOM_RPM_PM8018_LDO7 151
+#define QCOM_RPM_PM8018_LDO8 152
+#define QCOM_RPM_PM8018_LDO9 153
+#define QCOM_RPM_PM8018_LDO10 154
+#define QCOM_RPM_PM8018_LDO11 155
+#define QCOM_RPM_PM8018_LDO12 156
+#define QCOM_RPM_PM8018_LDO13 157
+#define QCOM_RPM_PM8018_LDO14 158
+#define QCOM_RPM_PM8018_LVS1 159
+#define QCOM_RPM_PM8018_NCP 160
+#define QCOM_RPM_VOLTAGE_CORNER 161
/*
* Constants used to select force mode for regulators.
--
1.9.1
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply related [flat|nested] 21+ messages in thread* [rtc-linux] [PATCH v4 3/4] mfd: qcom-rpm: Add support for pm8018 RPM Regulator
@ 2016-08-11 13:16 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2016-08-11 13:16 UTC (permalink / raw)
To: andy.gross, david.brown, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni
Cc: Neil Armstrong, linux-input, linux-kernel, linux-arm-msm,
linux-soc, rtc-linux
In order to support the Qualcomm MDM9615 SoC, add support for the
RPM regulator entries in the qcom-rpm driver.
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 1 +
drivers/mfd/qcom_rpm.c | 51 ++++++++++++++++++++++
include/dt-bindings/mfd/qcom-rpm.h | 22 ++++++++++
3 files changed, 74 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
index b98b291..72d68d4 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
@@ -13,6 +13,7 @@ frequencies.
"qcom,rpm-msm8660"
"qcom,rpm-msm8960"
"qcom,rpm-ipq8064"
+ "qcom,rpm-mdm9615"
- reg:
Usage: required
diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
index 2e44323..a74210d 100644
--- a/drivers/mfd/qcom_rpm.c
+++ b/drivers/mfd/qcom_rpm.c
@@ -388,11 +388,62 @@ static const struct qcom_rpm_data ipq806x_template = {
.ack_sel_size = 7,
};
+static const struct qcom_rpm_resource mdm9615_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 26, 10, 9, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 27, 11, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 28, 12, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 29, 13, 13, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 30, 14, 16, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 31, 15, 22, 2 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 33, 16, 23, 3 },
+ [QCOM_RPM_APPS_FABRIC_IOCTL] = { 36, 17, 24, 1 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 37, 18, 25, 27 },
+ [QCOM_RPM_PM8018_SMPS1] = { 64, 19, 30, 2 },
+ [QCOM_RPM_PM8018_SMPS2] = { 66, 21, 31, 2 },
+ [QCOM_RPM_PM8018_SMPS3] = { 68, 23, 32, 2 },
+ [QCOM_RPM_PM8018_SMPS4] = { 70, 25, 33, 2 },
+ [QCOM_RPM_PM8018_SMPS5] = { 72, 27, 34, 2 },
+ [QCOM_RPM_PM8018_LDO1] = { 74, 29, 35, 2 },
+ [QCOM_RPM_PM8018_LDO2] = { 76, 31, 36, 2 },
+ [QCOM_RPM_PM8018_LDO3] = { 78, 33, 37, 2 },
+ [QCOM_RPM_PM8018_LDO4] = { 80, 35, 38, 2 },
+ [QCOM_RPM_PM8018_LDO5] = { 82, 37, 39, 2 },
+ [QCOM_RPM_PM8018_LDO6] = { 84, 39, 40, 2 },
+ [QCOM_RPM_PM8018_LDO7] = { 86, 41, 41, 2 },
+ [QCOM_RPM_PM8018_LDO8] = { 88, 43, 42, 2 },
+ [QCOM_RPM_PM8018_LDO9] = { 90, 45, 43, 2 },
+ [QCOM_RPM_PM8018_LDO10] = { 92, 47, 44, 2 },
+ [QCOM_RPM_PM8018_LDO11] = { 94, 49, 45, 2 },
+ [QCOM_RPM_PM8018_LDO12] = { 96, 51, 46, 2 },
+ [QCOM_RPM_PM8018_LDO13] = { 98, 53, 47, 2 },
+ [QCOM_RPM_PM8018_LDO14] = { 100, 55, 48, 2 },
+ [QCOM_RPM_PM8018_LVS1] = { 102, 57, 49, 1 },
+ [QCOM_RPM_PM8018_NCP] = { 103, 58, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 105, 60, 81, 1 },
+ [QCOM_RPM_USB_OTG_SWITCH] = { 106, 61, 82, 1 },
+ [QCOM_RPM_HDMI_SWITCH] = { 107, 62, 83, 1 },
+ [QCOM_RPM_VOLTAGE_CORNER] = { 109, 64, 87, 1 },
+};
+
+static const struct qcom_rpm_data mdm9615_template = {
+ .version = 3,
+ .resource_table = mdm9615_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(mdm9615_rpm_resource_table),
+ .req_ctx_off = 3,
+ .req_sel_off = 11,
+ .ack_ctx_off = 15,
+ .ack_sel_off = 23,
+ .req_sel_size = 4,
+ .ack_sel_size = 7,
+};
+
static const struct of_device_id qcom_rpm_of_match[] = {
{ .compatible = "qcom,rpm-apq8064", .data = &apq8064_template },
{ .compatible = "qcom,rpm-msm8660", .data = &msm8660_template },
{ .compatible = "qcom,rpm-msm8960", .data = &msm8960_template },
{ .compatible = "qcom,rpm-ipq8064", .data = &ipq806x_template },
+ { .compatible = "qcom,rpm-mdm9615", .data = &mdm9615_template },
{ }
};
MODULE_DEVICE_TABLE(of, qcom_rpm_of_match);
diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h
index 13a9d4b..54aef5e 100644
--- a/include/dt-bindings/mfd/qcom-rpm.h
+++ b/include/dt-bindings/mfd/qcom-rpm.h
@@ -147,6 +147,28 @@
#define QCOM_RPM_SMB208_S1b 137
#define QCOM_RPM_SMB208_S2a 138
#define QCOM_RPM_SMB208_S2b 139
+#define QCOM_RPM_PM8018_SMPS1 140
+#define QCOM_RPM_PM8018_SMPS2 141
+#define QCOM_RPM_PM8018_SMPS3 142
+#define QCOM_RPM_PM8018_SMPS4 143
+#define QCOM_RPM_PM8018_SMPS5 144
+#define QCOM_RPM_PM8018_LDO1 145
+#define QCOM_RPM_PM8018_LDO2 146
+#define QCOM_RPM_PM8018_LDO3 147
+#define QCOM_RPM_PM8018_LDO4 148
+#define QCOM_RPM_PM8018_LDO5 149
+#define QCOM_RPM_PM8018_LDO6 150
+#define QCOM_RPM_PM8018_LDO7 151
+#define QCOM_RPM_PM8018_LDO8 152
+#define QCOM_RPM_PM8018_LDO9 153
+#define QCOM_RPM_PM8018_LDO10 154
+#define QCOM_RPM_PM8018_LDO11 155
+#define QCOM_RPM_PM8018_LDO12 156
+#define QCOM_RPM_PM8018_LDO13 157
+#define QCOM_RPM_PM8018_LDO14 158
+#define QCOM_RPM_PM8018_LVS1 159
+#define QCOM_RPM_PM8018_NCP 160
+#define QCOM_RPM_VOLTAGE_CORNER 161
/*
* Constants used to select force mode for regulators.
--
1.9.1
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v4 3/4] mfd: qcom-rpm: Add support for pm8018 RPM Regulator
@ 2016-08-11 13:16 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2016-08-11 13:16 UTC (permalink / raw)
To: andy.gross, david.brown, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni
Cc: Neil Armstrong, linux-input, linux-kernel, linux-arm-msm,
linux-soc, rtc-linux
In order to support the Qualcomm MDM9615 SoC, add support for the
RPM regulator entries in the qcom-rpm driver.
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 1 +
drivers/mfd/qcom_rpm.c | 51 ++++++++++++++++++++++
include/dt-bindings/mfd/qcom-rpm.h | 22 ++++++++++
3 files changed, 74 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
index b98b291..72d68d4 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
@@ -13,6 +13,7 @@ frequencies.
"qcom,rpm-msm8660"
"qcom,rpm-msm8960"
"qcom,rpm-ipq8064"
+ "qcom,rpm-mdm9615"
- reg:
Usage: required
diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
index 2e44323..a74210d 100644
--- a/drivers/mfd/qcom_rpm.c
+++ b/drivers/mfd/qcom_rpm.c
@@ -388,11 +388,62 @@ static const struct qcom_rpm_data ipq806x_template = {
.ack_sel_size = 7,
};
+static const struct qcom_rpm_resource mdm9615_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 26, 10, 9, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 27, 11, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 28, 12, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 29, 13, 13, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 30, 14, 16, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 31, 15, 22, 2 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 33, 16, 23, 3 },
+ [QCOM_RPM_APPS_FABRIC_IOCTL] = { 36, 17, 24, 1 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 37, 18, 25, 27 },
+ [QCOM_RPM_PM8018_SMPS1] = { 64, 19, 30, 2 },
+ [QCOM_RPM_PM8018_SMPS2] = { 66, 21, 31, 2 },
+ [QCOM_RPM_PM8018_SMPS3] = { 68, 23, 32, 2 },
+ [QCOM_RPM_PM8018_SMPS4] = { 70, 25, 33, 2 },
+ [QCOM_RPM_PM8018_SMPS5] = { 72, 27, 34, 2 },
+ [QCOM_RPM_PM8018_LDO1] = { 74, 29, 35, 2 },
+ [QCOM_RPM_PM8018_LDO2] = { 76, 31, 36, 2 },
+ [QCOM_RPM_PM8018_LDO3] = { 78, 33, 37, 2 },
+ [QCOM_RPM_PM8018_LDO4] = { 80, 35, 38, 2 },
+ [QCOM_RPM_PM8018_LDO5] = { 82, 37, 39, 2 },
+ [QCOM_RPM_PM8018_LDO6] = { 84, 39, 40, 2 },
+ [QCOM_RPM_PM8018_LDO7] = { 86, 41, 41, 2 },
+ [QCOM_RPM_PM8018_LDO8] = { 88, 43, 42, 2 },
+ [QCOM_RPM_PM8018_LDO9] = { 90, 45, 43, 2 },
+ [QCOM_RPM_PM8018_LDO10] = { 92, 47, 44, 2 },
+ [QCOM_RPM_PM8018_LDO11] = { 94, 49, 45, 2 },
+ [QCOM_RPM_PM8018_LDO12] = { 96, 51, 46, 2 },
+ [QCOM_RPM_PM8018_LDO13] = { 98, 53, 47, 2 },
+ [QCOM_RPM_PM8018_LDO14] = { 100, 55, 48, 2 },
+ [QCOM_RPM_PM8018_LVS1] = { 102, 57, 49, 1 },
+ [QCOM_RPM_PM8018_NCP] = { 103, 58, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 105, 60, 81, 1 },
+ [QCOM_RPM_USB_OTG_SWITCH] = { 106, 61, 82, 1 },
+ [QCOM_RPM_HDMI_SWITCH] = { 107, 62, 83, 1 },
+ [QCOM_RPM_VOLTAGE_CORNER] = { 109, 64, 87, 1 },
+};
+
+static const struct qcom_rpm_data mdm9615_template = {
+ .version = 3,
+ .resource_table = mdm9615_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(mdm9615_rpm_resource_table),
+ .req_ctx_off = 3,
+ .req_sel_off = 11,
+ .ack_ctx_off = 15,
+ .ack_sel_off = 23,
+ .req_sel_size = 4,
+ .ack_sel_size = 7,
+};
+
static const struct of_device_id qcom_rpm_of_match[] = {
{ .compatible = "qcom,rpm-apq8064", .data = &apq8064_template },
{ .compatible = "qcom,rpm-msm8660", .data = &msm8660_template },
{ .compatible = "qcom,rpm-msm8960", .data = &msm8960_template },
{ .compatible = "qcom,rpm-ipq8064", .data = &ipq806x_template },
+ { .compatible = "qcom,rpm-mdm9615", .data = &mdm9615_template },
{ }
};
MODULE_DEVICE_TABLE(of, qcom_rpm_of_match);
diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h
index 13a9d4b..54aef5e 100644
--- a/include/dt-bindings/mfd/qcom-rpm.h
+++ b/include/dt-bindings/mfd/qcom-rpm.h
@@ -147,6 +147,28 @@
#define QCOM_RPM_SMB208_S1b 137
#define QCOM_RPM_SMB208_S2a 138
#define QCOM_RPM_SMB208_S2b 139
+#define QCOM_RPM_PM8018_SMPS1 140
+#define QCOM_RPM_PM8018_SMPS2 141
+#define QCOM_RPM_PM8018_SMPS3 142
+#define QCOM_RPM_PM8018_SMPS4 143
+#define QCOM_RPM_PM8018_SMPS5 144
+#define QCOM_RPM_PM8018_LDO1 145
+#define QCOM_RPM_PM8018_LDO2 146
+#define QCOM_RPM_PM8018_LDO3 147
+#define QCOM_RPM_PM8018_LDO4 148
+#define QCOM_RPM_PM8018_LDO5 149
+#define QCOM_RPM_PM8018_LDO6 150
+#define QCOM_RPM_PM8018_LDO7 151
+#define QCOM_RPM_PM8018_LDO8 152
+#define QCOM_RPM_PM8018_LDO9 153
+#define QCOM_RPM_PM8018_LDO10 154
+#define QCOM_RPM_PM8018_LDO11 155
+#define QCOM_RPM_PM8018_LDO12 156
+#define QCOM_RPM_PM8018_LDO13 157
+#define QCOM_RPM_PM8018_LDO14 158
+#define QCOM_RPM_PM8018_LVS1 159
+#define QCOM_RPM_PM8018_NCP 160
+#define QCOM_RPM_VOLTAGE_CORNER 161
/*
* Constants used to select force mode for regulators.
--
1.9.1
^ permalink raw reply related [flat|nested] 21+ messages in thread[parent not found: <1470921406-18468-4-git-send-email-narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>]
* Re: [PATCH v4 3/4] mfd: qcom-rpm: Add support for pm8018 RPM Regulator
2016-08-11 13:16 ` Neil Armstrong
(?)
@ 2016-08-31 8:39 ` Lee Jones
-1 siblings, 0 replies; 21+ messages in thread
From: Lee Jones @ 2016-08-31 8:39 UTC (permalink / raw)
To: Neil Armstrong
Cc: andy.gross-QSEj5FYQhm4dnm+yROfE0A,
david.brown-QSEj5FYQhm4dnm+yROfE0A,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w, broonie-DgEjT+Ai2ygdnm+yROfE0A,
a.zummo-BfzFCNDTiLLj+vYz1yj4TQ,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
linux-input-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA,
linux-soc-u79uwXL29TY76Z2rM5mHXA,
rtc-linux-/JYPxA39Uh5TLH3MbocFFw
On Thu, 11 Aug 2016, Neil Armstrong wrote:
> In order to support the Qualcomm MDM9615 SoC, add support for the
> RPM regulator entries in the qcom-rpm driver.
>
> Acked-by: Bjorn Andersson <bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Acked-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Signed-off-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Quick note. In future can you keep these chronological please?
Bjorn and I could not have Acked the patch before you sent it.
> ---
> Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 1 +
> drivers/mfd/qcom_rpm.c | 51 ++++++++++++++++++++++
> include/dt-bindings/mfd/qcom-rpm.h | 22 ++++++++++
> 3 files changed, 74 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> index b98b291..72d68d4 100644
> --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> @@ -13,6 +13,7 @@ frequencies.
> "qcom,rpm-msm8660"
> "qcom,rpm-msm8960"
> "qcom,rpm-ipq8064"
> + "qcom,rpm-mdm9615"
>
> - reg:
> Usage: required
> diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
> index 2e44323..a74210d 100644
> --- a/drivers/mfd/qcom_rpm.c
> +++ b/drivers/mfd/qcom_rpm.c
> @@ -388,11 +388,62 @@ static const struct qcom_rpm_data ipq806x_template = {
> .ack_sel_size = 7,
> };
>
> +static const struct qcom_rpm_resource mdm9615_rpm_resource_table[] = {
> + [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
> + [QCOM_RPM_SYS_FABRIC_CLK] = { 26, 10, 9, 1 },
> + [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 27, 11, 11, 1 },
> + [QCOM_RPM_SFPB_CLK] = { 28, 12, 12, 1 },
> + [QCOM_RPM_CFPB_CLK] = { 29, 13, 13, 1 },
> + [QCOM_RPM_EBI1_CLK] = { 30, 14, 16, 1 },
> + [QCOM_RPM_APPS_FABRIC_HALT] = { 31, 15, 22, 2 },
> + [QCOM_RPM_APPS_FABRIC_MODE] = { 33, 16, 23, 3 },
> + [QCOM_RPM_APPS_FABRIC_IOCTL] = { 36, 17, 24, 1 },
> + [QCOM_RPM_APPS_FABRIC_ARB] = { 37, 18, 25, 27 },
> + [QCOM_RPM_PM8018_SMPS1] = { 64, 19, 30, 2 },
> + [QCOM_RPM_PM8018_SMPS2] = { 66, 21, 31, 2 },
> + [QCOM_RPM_PM8018_SMPS3] = { 68, 23, 32, 2 },
> + [QCOM_RPM_PM8018_SMPS4] = { 70, 25, 33, 2 },
> + [QCOM_RPM_PM8018_SMPS5] = { 72, 27, 34, 2 },
> + [QCOM_RPM_PM8018_LDO1] = { 74, 29, 35, 2 },
> + [QCOM_RPM_PM8018_LDO2] = { 76, 31, 36, 2 },
> + [QCOM_RPM_PM8018_LDO3] = { 78, 33, 37, 2 },
> + [QCOM_RPM_PM8018_LDO4] = { 80, 35, 38, 2 },
> + [QCOM_RPM_PM8018_LDO5] = { 82, 37, 39, 2 },
> + [QCOM_RPM_PM8018_LDO6] = { 84, 39, 40, 2 },
> + [QCOM_RPM_PM8018_LDO7] = { 86, 41, 41, 2 },
> + [QCOM_RPM_PM8018_LDO8] = { 88, 43, 42, 2 },
> + [QCOM_RPM_PM8018_LDO9] = { 90, 45, 43, 2 },
> + [QCOM_RPM_PM8018_LDO10] = { 92, 47, 44, 2 },
> + [QCOM_RPM_PM8018_LDO11] = { 94, 49, 45, 2 },
> + [QCOM_RPM_PM8018_LDO12] = { 96, 51, 46, 2 },
> + [QCOM_RPM_PM8018_LDO13] = { 98, 53, 47, 2 },
> + [QCOM_RPM_PM8018_LDO14] = { 100, 55, 48, 2 },
> + [QCOM_RPM_PM8018_LVS1] = { 102, 57, 49, 1 },
> + [QCOM_RPM_PM8018_NCP] = { 103, 58, 80, 2 },
> + [QCOM_RPM_CXO_BUFFERS] = { 105, 60, 81, 1 },
> + [QCOM_RPM_USB_OTG_SWITCH] = { 106, 61, 82, 1 },
> + [QCOM_RPM_HDMI_SWITCH] = { 107, 62, 83, 1 },
> + [QCOM_RPM_VOLTAGE_CORNER] = { 109, 64, 87, 1 },
> +};
> +
> +static const struct qcom_rpm_data mdm9615_template = {
> + .version = 3,
> + .resource_table = mdm9615_rpm_resource_table,
> + .n_resources = ARRAY_SIZE(mdm9615_rpm_resource_table),
> + .req_ctx_off = 3,
> + .req_sel_off = 11,
> + .ack_ctx_off = 15,
> + .ack_sel_off = 23,
> + .req_sel_size = 4,
> + .ack_sel_size = 7,
> +};
> +
> static const struct of_device_id qcom_rpm_of_match[] = {
> { .compatible = "qcom,rpm-apq8064", .data = &apq8064_template },
> { .compatible = "qcom,rpm-msm8660", .data = &msm8660_template },
> { .compatible = "qcom,rpm-msm8960", .data = &msm8960_template },
> { .compatible = "qcom,rpm-ipq8064", .data = &ipq806x_template },
> + { .compatible = "qcom,rpm-mdm9615", .data = &mdm9615_template },
> { }
> };
> MODULE_DEVICE_TABLE(of, qcom_rpm_of_match);
> diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h
> index 13a9d4b..54aef5e 100644
> --- a/include/dt-bindings/mfd/qcom-rpm.h
> +++ b/include/dt-bindings/mfd/qcom-rpm.h
> @@ -147,6 +147,28 @@
> #define QCOM_RPM_SMB208_S1b 137
> #define QCOM_RPM_SMB208_S2a 138
> #define QCOM_RPM_SMB208_S2b 139
> +#define QCOM_RPM_PM8018_SMPS1 140
> +#define QCOM_RPM_PM8018_SMPS2 141
> +#define QCOM_RPM_PM8018_SMPS3 142
> +#define QCOM_RPM_PM8018_SMPS4 143
> +#define QCOM_RPM_PM8018_SMPS5 144
> +#define QCOM_RPM_PM8018_LDO1 145
> +#define QCOM_RPM_PM8018_LDO2 146
> +#define QCOM_RPM_PM8018_LDO3 147
> +#define QCOM_RPM_PM8018_LDO4 148
> +#define QCOM_RPM_PM8018_LDO5 149
> +#define QCOM_RPM_PM8018_LDO6 150
> +#define QCOM_RPM_PM8018_LDO7 151
> +#define QCOM_RPM_PM8018_LDO8 152
> +#define QCOM_RPM_PM8018_LDO9 153
> +#define QCOM_RPM_PM8018_LDO10 154
> +#define QCOM_RPM_PM8018_LDO11 155
> +#define QCOM_RPM_PM8018_LDO12 156
> +#define QCOM_RPM_PM8018_LDO13 157
> +#define QCOM_RPM_PM8018_LDO14 158
> +#define QCOM_RPM_PM8018_LVS1 159
> +#define QCOM_RPM_PM8018_NCP 160
> +#define QCOM_RPM_VOLTAGE_CORNER 161
>
> /*
> * Constants used to select force mode for regulators.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply [flat|nested] 21+ messages in thread* [rtc-linux] Re: [PATCH v4 3/4] mfd: qcom-rpm: Add support for pm8018 RPM Regulator
@ 2016-08-31 8:39 ` Lee Jones
0 siblings, 0 replies; 21+ messages in thread
From: Lee Jones @ 2016-08-31 8:39 UTC (permalink / raw)
To: Neil Armstrong
Cc: andy.gross, david.brown, lgirdwood, broonie, a.zummo,
alexandre.belloni, linux-input, linux-kernel, linux-arm-msm,
linux-soc, rtc-linux
On Thu, 11 Aug 2016, Neil Armstrong wrote:
> In order to support the Qualcomm MDM9615 SoC, add support for the
> RPM regulator entries in the qcom-rpm driver.
>=20
> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Acked-by: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Quick note. In future can you keep these chronological please?
Bjorn and I could not have Acked the patch before you sent it.
> ---
> Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 1 +
> drivers/mfd/qcom_rpm.c | 51 ++++++++++++++++=
++++++
> include/dt-bindings/mfd/qcom-rpm.h | 22 ++++++++++
> 3 files changed, 74 insertions(+)
>=20
> diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documen=
tation/devicetree/bindings/mfd/qcom-rpm.txt
> index b98b291..72d68d4 100644
> --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> @@ -13,6 +13,7 @@ frequencies.
> "qcom,rpm-msm8660"
> "qcom,rpm-msm8960"
> "qcom,rpm-ipq8064"
> + "qcom,rpm-mdm9615"
> =20
> - reg:
> Usage: required
> diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
> index 2e44323..a74210d 100644
> --- a/drivers/mfd/qcom_rpm.c
> +++ b/drivers/mfd/qcom_rpm.c
> @@ -388,11 +388,62 @@ static const struct qcom_rpm_data ipq806x_template =
=3D {
> .ack_sel_size =3D 7,
> };
> =20
> +static const struct qcom_rpm_resource mdm9615_rpm_resource_table[] =3D {
> + [QCOM_RPM_CXO_CLK] =3D { 25, 9, 5, 1 },
> + [QCOM_RPM_SYS_FABRIC_CLK] =3D { 26, 10, 9, 1 },
> + [QCOM_RPM_DAYTONA_FABRIC_CLK] =3D { 27, 11, 11, 1 },
> + [QCOM_RPM_SFPB_CLK] =3D { 28, 12, 12, 1 },
> + [QCOM_RPM_CFPB_CLK] =3D { 29, 13, 13, 1 },
> + [QCOM_RPM_EBI1_CLK] =3D { 30, 14, 16, 1 },
> + [QCOM_RPM_APPS_FABRIC_HALT] =3D { 31, 15, 22, 2 },
> + [QCOM_RPM_APPS_FABRIC_MODE] =3D { 33, 16, 23, 3 },
> + [QCOM_RPM_APPS_FABRIC_IOCTL] =3D { 36, 17, 24, 1 },
> + [QCOM_RPM_APPS_FABRIC_ARB] =3D { 37, 18, 25, 27 },
> + [QCOM_RPM_PM8018_SMPS1] =3D { 64, 19, 30, 2 },
> + [QCOM_RPM_PM8018_SMPS2] =3D { 66, 21, 31, 2 },
> + [QCOM_RPM_PM8018_SMPS3] =3D { 68, 23, 32, 2 },
> + [QCOM_RPM_PM8018_SMPS4] =3D { 70, 25, 33, 2 },
> + [QCOM_RPM_PM8018_SMPS5] =3D { 72, 27, 34, 2 },
> + [QCOM_RPM_PM8018_LDO1] =3D { 74, 29, 35, 2 },
> + [QCOM_RPM_PM8018_LDO2] =3D { 76, 31, 36, 2 },
> + [QCOM_RPM_PM8018_LDO3] =3D { 78, 33, 37, 2 },
> + [QCOM_RPM_PM8018_LDO4] =3D { 80, 35, 38, 2 },
> + [QCOM_RPM_PM8018_LDO5] =3D { 82, 37, 39, 2 },
> + [QCOM_RPM_PM8018_LDO6] =3D { 84, 39, 40, 2 },
> + [QCOM_RPM_PM8018_LDO7] =3D { 86, 41, 41, 2 },
> + [QCOM_RPM_PM8018_LDO8] =3D { 88, 43, 42, 2 },
> + [QCOM_RPM_PM8018_LDO9] =3D { 90, 45, 43, 2 },
> + [QCOM_RPM_PM8018_LDO10] =3D { 92, 47, 44, 2 },
> + [QCOM_RPM_PM8018_LDO11] =3D { 94, 49, 45, 2 },
> + [QCOM_RPM_PM8018_LDO12] =3D { 96, 51, 46, 2 },
> + [QCOM_RPM_PM8018_LDO13] =3D { 98, 53, 47, 2 },
> + [QCOM_RPM_PM8018_LDO14] =3D { 100, 55, 48, 2 },
> + [QCOM_RPM_PM8018_LVS1] =3D { 102, 57, 49, 1 },
> + [QCOM_RPM_PM8018_NCP] =3D { 103, 58, 80, 2 },
> + [QCOM_RPM_CXO_BUFFERS] =3D { 105, 60, 81, 1 },
> + [QCOM_RPM_USB_OTG_SWITCH] =3D { 106, 61, 82, 1 },
> + [QCOM_RPM_HDMI_SWITCH] =3D { 107, 62, 83, 1 },
> + [QCOM_RPM_VOLTAGE_CORNER] =3D { 109, 64, 87, 1 },
> +};
> +
> +static const struct qcom_rpm_data mdm9615_template =3D {
> + .version =3D 3,
> + .resource_table =3D mdm9615_rpm_resource_table,
> + .n_resources =3D ARRAY_SIZE(mdm9615_rpm_resource_table),
> + .req_ctx_off =3D 3,
> + .req_sel_off =3D 11,
> + .ack_ctx_off =3D 15,
> + .ack_sel_off =3D 23,
> + .req_sel_size =3D 4,
> + .ack_sel_size =3D 7,
> +};
> +
> static const struct of_device_id qcom_rpm_of_match[] =3D {
> { .compatible =3D "qcom,rpm-apq8064", .data =3D &apq8064_template },
> { .compatible =3D "qcom,rpm-msm8660", .data =3D &msm8660_template },
> { .compatible =3D "qcom,rpm-msm8960", .data =3D &msm8960_template },
> { .compatible =3D "qcom,rpm-ipq8064", .data =3D &ipq806x_template },
> + { .compatible =3D "qcom,rpm-mdm9615", .data =3D &mdm9615_template },
> { }
> };
> MODULE_DEVICE_TABLE(of, qcom_rpm_of_match);
> diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd=
/qcom-rpm.h
> index 13a9d4b..54aef5e 100644
> --- a/include/dt-bindings/mfd/qcom-rpm.h
> +++ b/include/dt-bindings/mfd/qcom-rpm.h
> @@ -147,6 +147,28 @@
> #define QCOM_RPM_SMB208_S1b 137
> #define QCOM_RPM_SMB208_S2a 138
> #define QCOM_RPM_SMB208_S2b 139
> +#define QCOM_RPM_PM8018_SMPS1 140
> +#define QCOM_RPM_PM8018_SMPS2 141
> +#define QCOM_RPM_PM8018_SMPS3 142
> +#define QCOM_RPM_PM8018_SMPS4 143
> +#define QCOM_RPM_PM8018_SMPS5 144
> +#define QCOM_RPM_PM8018_LDO1 145
> +#define QCOM_RPM_PM8018_LDO2 146
> +#define QCOM_RPM_PM8018_LDO3 147
> +#define QCOM_RPM_PM8018_LDO4 148
> +#define QCOM_RPM_PM8018_LDO5 149
> +#define QCOM_RPM_PM8018_LDO6 150
> +#define QCOM_RPM_PM8018_LDO7 151
> +#define QCOM_RPM_PM8018_LDO8 152
> +#define QCOM_RPM_PM8018_LDO9 153
> +#define QCOM_RPM_PM8018_LDO10 154
> +#define QCOM_RPM_PM8018_LDO11 155
> +#define QCOM_RPM_PM8018_LDO12 156
> +#define QCOM_RPM_PM8018_LDO13 157
> +#define QCOM_RPM_PM8018_LDO14 158
> +#define QCOM_RPM_PM8018_LVS1 159
> +#define QCOM_RPM_PM8018_NCP 160
> +#define QCOM_RPM_VOLTAGE_CORNER 161
> =20
> /*
> * Constants used to select force mode for regulators.
--=20
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org =E2=94=82 Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--=20
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---=20
You received this message because you are subscribed to the Google Groups "=
rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an e=
mail to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH v4 3/4] mfd: qcom-rpm: Add support for pm8018 RPM Regulator
@ 2016-08-31 8:39 ` Lee Jones
0 siblings, 0 replies; 21+ messages in thread
From: Lee Jones @ 2016-08-31 8:39 UTC (permalink / raw)
To: Neil Armstrong
Cc: andy.gross, david.brown, lgirdwood, broonie, a.zummo,
alexandre.belloni, linux-input, linux-kernel, linux-arm-msm,
linux-soc, rtc-linux
On Thu, 11 Aug 2016, Neil Armstrong wrote:
> In order to support the Qualcomm MDM9615 SoC, add support for the
> RPM regulator entries in the qcom-rpm driver.
>
> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Acked-by: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Quick note. In future can you keep these chronological please?
Bjorn and I could not have Acked the patch before you sent it.
> ---
> Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 1 +
> drivers/mfd/qcom_rpm.c | 51 ++++++++++++++++++++++
> include/dt-bindings/mfd/qcom-rpm.h | 22 ++++++++++
> 3 files changed, 74 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> index b98b291..72d68d4 100644
> --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> @@ -13,6 +13,7 @@ frequencies.
> "qcom,rpm-msm8660"
> "qcom,rpm-msm8960"
> "qcom,rpm-ipq8064"
> + "qcom,rpm-mdm9615"
>
> - reg:
> Usage: required
> diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
> index 2e44323..a74210d 100644
> --- a/drivers/mfd/qcom_rpm.c
> +++ b/drivers/mfd/qcom_rpm.c
> @@ -388,11 +388,62 @@ static const struct qcom_rpm_data ipq806x_template = {
> .ack_sel_size = 7,
> };
>
> +static const struct qcom_rpm_resource mdm9615_rpm_resource_table[] = {
> + [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
> + [QCOM_RPM_SYS_FABRIC_CLK] = { 26, 10, 9, 1 },
> + [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 27, 11, 11, 1 },
> + [QCOM_RPM_SFPB_CLK] = { 28, 12, 12, 1 },
> + [QCOM_RPM_CFPB_CLK] = { 29, 13, 13, 1 },
> + [QCOM_RPM_EBI1_CLK] = { 30, 14, 16, 1 },
> + [QCOM_RPM_APPS_FABRIC_HALT] = { 31, 15, 22, 2 },
> + [QCOM_RPM_APPS_FABRIC_MODE] = { 33, 16, 23, 3 },
> + [QCOM_RPM_APPS_FABRIC_IOCTL] = { 36, 17, 24, 1 },
> + [QCOM_RPM_APPS_FABRIC_ARB] = { 37, 18, 25, 27 },
> + [QCOM_RPM_PM8018_SMPS1] = { 64, 19, 30, 2 },
> + [QCOM_RPM_PM8018_SMPS2] = { 66, 21, 31, 2 },
> + [QCOM_RPM_PM8018_SMPS3] = { 68, 23, 32, 2 },
> + [QCOM_RPM_PM8018_SMPS4] = { 70, 25, 33, 2 },
> + [QCOM_RPM_PM8018_SMPS5] = { 72, 27, 34, 2 },
> + [QCOM_RPM_PM8018_LDO1] = { 74, 29, 35, 2 },
> + [QCOM_RPM_PM8018_LDO2] = { 76, 31, 36, 2 },
> + [QCOM_RPM_PM8018_LDO3] = { 78, 33, 37, 2 },
> + [QCOM_RPM_PM8018_LDO4] = { 80, 35, 38, 2 },
> + [QCOM_RPM_PM8018_LDO5] = { 82, 37, 39, 2 },
> + [QCOM_RPM_PM8018_LDO6] = { 84, 39, 40, 2 },
> + [QCOM_RPM_PM8018_LDO7] = { 86, 41, 41, 2 },
> + [QCOM_RPM_PM8018_LDO8] = { 88, 43, 42, 2 },
> + [QCOM_RPM_PM8018_LDO9] = { 90, 45, 43, 2 },
> + [QCOM_RPM_PM8018_LDO10] = { 92, 47, 44, 2 },
> + [QCOM_RPM_PM8018_LDO11] = { 94, 49, 45, 2 },
> + [QCOM_RPM_PM8018_LDO12] = { 96, 51, 46, 2 },
> + [QCOM_RPM_PM8018_LDO13] = { 98, 53, 47, 2 },
> + [QCOM_RPM_PM8018_LDO14] = { 100, 55, 48, 2 },
> + [QCOM_RPM_PM8018_LVS1] = { 102, 57, 49, 1 },
> + [QCOM_RPM_PM8018_NCP] = { 103, 58, 80, 2 },
> + [QCOM_RPM_CXO_BUFFERS] = { 105, 60, 81, 1 },
> + [QCOM_RPM_USB_OTG_SWITCH] = { 106, 61, 82, 1 },
> + [QCOM_RPM_HDMI_SWITCH] = { 107, 62, 83, 1 },
> + [QCOM_RPM_VOLTAGE_CORNER] = { 109, 64, 87, 1 },
> +};
> +
> +static const struct qcom_rpm_data mdm9615_template = {
> + .version = 3,
> + .resource_table = mdm9615_rpm_resource_table,
> + .n_resources = ARRAY_SIZE(mdm9615_rpm_resource_table),
> + .req_ctx_off = 3,
> + .req_sel_off = 11,
> + .ack_ctx_off = 15,
> + .ack_sel_off = 23,
> + .req_sel_size = 4,
> + .ack_sel_size = 7,
> +};
> +
> static const struct of_device_id qcom_rpm_of_match[] = {
> { .compatible = "qcom,rpm-apq8064", .data = &apq8064_template },
> { .compatible = "qcom,rpm-msm8660", .data = &msm8660_template },
> { .compatible = "qcom,rpm-msm8960", .data = &msm8960_template },
> { .compatible = "qcom,rpm-ipq8064", .data = &ipq806x_template },
> + { .compatible = "qcom,rpm-mdm9615", .data = &mdm9615_template },
> { }
> };
> MODULE_DEVICE_TABLE(of, qcom_rpm_of_match);
> diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h
> index 13a9d4b..54aef5e 100644
> --- a/include/dt-bindings/mfd/qcom-rpm.h
> +++ b/include/dt-bindings/mfd/qcom-rpm.h
> @@ -147,6 +147,28 @@
> #define QCOM_RPM_SMB208_S1b 137
> #define QCOM_RPM_SMB208_S2a 138
> #define QCOM_RPM_SMB208_S2b 139
> +#define QCOM_RPM_PM8018_SMPS1 140
> +#define QCOM_RPM_PM8018_SMPS2 141
> +#define QCOM_RPM_PM8018_SMPS3 142
> +#define QCOM_RPM_PM8018_SMPS4 143
> +#define QCOM_RPM_PM8018_SMPS5 144
> +#define QCOM_RPM_PM8018_LDO1 145
> +#define QCOM_RPM_PM8018_LDO2 146
> +#define QCOM_RPM_PM8018_LDO3 147
> +#define QCOM_RPM_PM8018_LDO4 148
> +#define QCOM_RPM_PM8018_LDO5 149
> +#define QCOM_RPM_PM8018_LDO6 150
> +#define QCOM_RPM_PM8018_LDO7 151
> +#define QCOM_RPM_PM8018_LDO8 152
> +#define QCOM_RPM_PM8018_LDO9 153
> +#define QCOM_RPM_PM8018_LDO10 154
> +#define QCOM_RPM_PM8018_LDO11 155
> +#define QCOM_RPM_PM8018_LDO12 156
> +#define QCOM_RPM_PM8018_LDO13 157
> +#define QCOM_RPM_PM8018_LDO14 158
> +#define QCOM_RPM_PM8018_LVS1 159
> +#define QCOM_RPM_PM8018_NCP 160
> +#define QCOM_RPM_VOLTAGE_CORNER 161
>
> /*
> * Constants used to select force mode for regulators.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v4 4/4] regulator: qcom_rpm-regulator: Add support for pm8018 rpm regulator
2016-08-11 13:16 ` Neil Armstrong
(?)
@ 2016-08-11 13:16 ` Neil Armstrong
-1 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2016-08-11 13:16 UTC (permalink / raw)
To: andy.gross-QSEj5FYQhm4dnm+yROfE0A,
david.brown-QSEj5FYQhm4dnm+yROfE0A,
lee.jones-QSEj5FYQhm4dnm+yROfE0A,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w, broonie-DgEjT+Ai2ygdnm+yROfE0A,
a.zummo-BfzFCNDTiLLj+vYz1yj4TQ,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8
Cc: Neil Armstrong, linux-input-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA,
linux-soc-u79uwXL29TY76Z2rM5mHXA,
rtc-linux-/JYPxA39Uh5TLH3MbocFFw
In order to support the Qualcomm MDM9615 SoC, add support for the
PM8018 RPM regulator in the qcom_rpm-regulator driver.
Acked-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 14 +++++
drivers/regulator/qcom_rpm-regulator.c | 66 ++++++++++++++++++++++
2 files changed, 80 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
index 72d68d4..485bc59 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
@@ -60,6 +60,7 @@ Regulator nodes are identified by their compatible:
"qcom,rpm-pm8058-regulators"
"qcom,rpm-pm8901-regulators"
"qcom,rpm-pm8921-regulators"
+ "qcom,rpm-pm8018-regulators"
- vdd_l0_l1_lvs-supply:
- vdd_l2_l11_l12-supply:
@@ -138,6 +139,15 @@ Regulator nodes are identified by their compatible:
Definition: reference to regulator supplying the input pin, as
described in the data sheet
+- vin_lvs1-supply:
+- vdd_l7-supply:
+- vdd_l8-supply:
+- vdd_l9_l10_l11_l12-supply:
+ Usage: optional (pm8018 only)
+ Value type: <phandle>
+ Definition: reference to regulator supplying the input pin, as
+ described in the data sheet
+
The regulator node houses sub-nodes for each regulator within the device. Each
sub-node is identified using the node's name, with valid values listed for each
of the pmics below.
@@ -157,6 +167,10 @@ pm8921:
l29, lvs1, lvs2, lvs3, lvs4, lvs5, lvs6, lvs7, usb-switch, hdmi-switch,
ncp
+pm8018:
+ s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+ l12, l14, lvs1
+
The content of each sub-node is defined by the standard binding for regulators -
see regulator.txt - with additional custom properties described below:
diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c
index e254272..1b2acc4 100644
--- a/drivers/regulator/qcom_rpm-regulator.c
+++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -448,6 +448,44 @@ static struct regulator_ops switch_ops = {
};
/*
+ * PM8018 regulators
+ */
+static const struct qcom_rpm_reg pm8018_pldo = {
+ .desc.linear_ranges = pldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
+ .desc.n_voltages = 161,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8018_nldo = {
+ .desc.linear_ranges = nldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
+ .desc.n_voltages = 64,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8018_smps = {
+ .desc.linear_ranges = smps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges),
+ .desc.n_voltages = 154,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_smps_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8018_switch = {
+ .desc.ops = &switch_ops,
+ .parts = &rpm8960_switch_parts,
+};
+
+/*
* PM8058 regulators
*/
static const struct qcom_rpm_reg pm8058_pldo = {
@@ -755,6 +793,32 @@ struct rpm_regulator_data {
const char *supply;
};
+static const struct rpm_regulator_data rpm_pm8018_regulators[] = {
+ { "s1", QCOM_RPM_PM8018_SMPS1, &pm8018_smps, "vdd_s1" },
+ { "s2", QCOM_RPM_PM8018_SMPS2, &pm8018_smps, "vdd_s2" },
+ { "s3", QCOM_RPM_PM8018_SMPS3, &pm8018_smps, "vdd_s3" },
+ { "s4", QCOM_RPM_PM8018_SMPS4, &pm8018_smps, "vdd_s4" },
+ { "s5", QCOM_RPM_PM8018_SMPS5, &pm8018_smps, "vdd_s5" },
+
+ { "l2", QCOM_RPM_PM8018_LDO2, &pm8018_pldo, "vdd_l2" },
+ { "l3", QCOM_RPM_PM8018_LDO3, &pm8018_pldo, "vdd_l3" },
+ { "l4", QCOM_RPM_PM8018_LDO4, &pm8018_pldo, "vdd_l4" },
+ { "l5", QCOM_RPM_PM8018_LDO5, &pm8018_pldo, "vdd_l5" },
+ { "l6", QCOM_RPM_PM8018_LDO6, &pm8018_pldo, "vdd_l7" },
+ { "l7", QCOM_RPM_PM8018_LDO7, &pm8018_pldo, "vdd_l7" },
+ { "l8", QCOM_RPM_PM8018_LDO8, &pm8018_nldo, "vdd_l8" },
+ { "l9", QCOM_RPM_PM8018_LDO9, &pm8921_nldo1200,
+ "vdd_l9_l10_l11_l12" },
+ { "l10", QCOM_RPM_PM8018_LDO10, &pm8018_nldo, "vdd_l9_l10_l11_l12" },
+ { "l11", QCOM_RPM_PM8018_LDO11, &pm8018_nldo, "vdd_l9_l10_l11_l12" },
+ { "l12", QCOM_RPM_PM8018_LDO12, &pm8018_nldo, "vdd_l9_l10_l11_l12" },
+ { "l14", QCOM_RPM_PM8018_LDO14, &pm8018_pldo, "vdd_l14" },
+
+ { "lvs1", QCOM_RPM_PM8018_LVS1, &pm8018_switch, "lvs1_in" },
+
+ { }
+};
+
static const struct rpm_regulator_data rpm_pm8058_regulators[] = {
{ "l0", QCOM_RPM_PM8058_LDO0, &pm8058_nldo, "vdd_l0_l1_lvs" },
{ "l1", QCOM_RPM_PM8058_LDO1, &pm8058_nldo, "vdd_l0_l1_lvs" },
@@ -870,6 +934,8 @@ static const struct rpm_regulator_data rpm_pm8921_regulators[] = {
};
static const struct of_device_id rpm_of_match[] = {
+ { .compatible = "qcom,rpm-pm8018-regulators",
+ .data = &rpm_pm8018_regulators },
{ .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators },
{ .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators },
{ .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators },
--
1.9.1
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply related [flat|nested] 21+ messages in thread* [rtc-linux] [PATCH v4 4/4] regulator: qcom_rpm-regulator: Add support for pm8018 rpm regulator
@ 2016-08-11 13:16 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2016-08-11 13:16 UTC (permalink / raw)
To: andy.gross, david.brown, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni
Cc: Neil Armstrong, linux-input, linux-kernel, linux-arm-msm,
linux-soc, rtc-linux
In order to support the Qualcomm MDM9615 SoC, add support for the
PM8018 RPM regulator in the qcom_rpm-regulator driver.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 14 +++++
drivers/regulator/qcom_rpm-regulator.c | 66 ++++++++++++++++++++++
2 files changed, 80 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
index 72d68d4..485bc59 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
@@ -60,6 +60,7 @@ Regulator nodes are identified by their compatible:
"qcom,rpm-pm8058-regulators"
"qcom,rpm-pm8901-regulators"
"qcom,rpm-pm8921-regulators"
+ "qcom,rpm-pm8018-regulators"
- vdd_l0_l1_lvs-supply:
- vdd_l2_l11_l12-supply:
@@ -138,6 +139,15 @@ Regulator nodes are identified by their compatible:
Definition: reference to regulator supplying the input pin, as
described in the data sheet
+- vin_lvs1-supply:
+- vdd_l7-supply:
+- vdd_l8-supply:
+- vdd_l9_l10_l11_l12-supply:
+ Usage: optional (pm8018 only)
+ Value type: <phandle>
+ Definition: reference to regulator supplying the input pin, as
+ described in the data sheet
+
The regulator node houses sub-nodes for each regulator within the device. Each
sub-node is identified using the node's name, with valid values listed for each
of the pmics below.
@@ -157,6 +167,10 @@ pm8921:
l29, lvs1, lvs2, lvs3, lvs4, lvs5, lvs6, lvs7, usb-switch, hdmi-switch,
ncp
+pm8018:
+ s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+ l12, l14, lvs1
+
The content of each sub-node is defined by the standard binding for regulators -
see regulator.txt - with additional custom properties described below:
diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c
index e254272..1b2acc4 100644
--- a/drivers/regulator/qcom_rpm-regulator.c
+++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -448,6 +448,44 @@ static struct regulator_ops switch_ops = {
};
/*
+ * PM8018 regulators
+ */
+static const struct qcom_rpm_reg pm8018_pldo = {
+ .desc.linear_ranges = pldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
+ .desc.n_voltages = 161,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8018_nldo = {
+ .desc.linear_ranges = nldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
+ .desc.n_voltages = 64,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8018_smps = {
+ .desc.linear_ranges = smps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges),
+ .desc.n_voltages = 154,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_smps_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8018_switch = {
+ .desc.ops = &switch_ops,
+ .parts = &rpm8960_switch_parts,
+};
+
+/*
* PM8058 regulators
*/
static const struct qcom_rpm_reg pm8058_pldo = {
@@ -755,6 +793,32 @@ struct rpm_regulator_data {
const char *supply;
};
+static const struct rpm_regulator_data rpm_pm8018_regulators[] = {
+ { "s1", QCOM_RPM_PM8018_SMPS1, &pm8018_smps, "vdd_s1" },
+ { "s2", QCOM_RPM_PM8018_SMPS2, &pm8018_smps, "vdd_s2" },
+ { "s3", QCOM_RPM_PM8018_SMPS3, &pm8018_smps, "vdd_s3" },
+ { "s4", QCOM_RPM_PM8018_SMPS4, &pm8018_smps, "vdd_s4" },
+ { "s5", QCOM_RPM_PM8018_SMPS5, &pm8018_smps, "vdd_s5" },
+
+ { "l2", QCOM_RPM_PM8018_LDO2, &pm8018_pldo, "vdd_l2" },
+ { "l3", QCOM_RPM_PM8018_LDO3, &pm8018_pldo, "vdd_l3" },
+ { "l4", QCOM_RPM_PM8018_LDO4, &pm8018_pldo, "vdd_l4" },
+ { "l5", QCOM_RPM_PM8018_LDO5, &pm8018_pldo, "vdd_l5" },
+ { "l6", QCOM_RPM_PM8018_LDO6, &pm8018_pldo, "vdd_l7" },
+ { "l7", QCOM_RPM_PM8018_LDO7, &pm8018_pldo, "vdd_l7" },
+ { "l8", QCOM_RPM_PM8018_LDO8, &pm8018_nldo, "vdd_l8" },
+ { "l9", QCOM_RPM_PM8018_LDO9, &pm8921_nldo1200,
+ "vdd_l9_l10_l11_l12" },
+ { "l10", QCOM_RPM_PM8018_LDO10, &pm8018_nldo, "vdd_l9_l10_l11_l12" },
+ { "l11", QCOM_RPM_PM8018_LDO11, &pm8018_nldo, "vdd_l9_l10_l11_l12" },
+ { "l12", QCOM_RPM_PM8018_LDO12, &pm8018_nldo, "vdd_l9_l10_l11_l12" },
+ { "l14", QCOM_RPM_PM8018_LDO14, &pm8018_pldo, "vdd_l14" },
+
+ { "lvs1", QCOM_RPM_PM8018_LVS1, &pm8018_switch, "lvs1_in" },
+
+ { }
+};
+
static const struct rpm_regulator_data rpm_pm8058_regulators[] = {
{ "l0", QCOM_RPM_PM8058_LDO0, &pm8058_nldo, "vdd_l0_l1_lvs" },
{ "l1", QCOM_RPM_PM8058_LDO1, &pm8058_nldo, "vdd_l0_l1_lvs" },
@@ -870,6 +934,8 @@ static const struct rpm_regulator_data rpm_pm8921_regulators[] = {
};
static const struct of_device_id rpm_of_match[] = {
+ { .compatible = "qcom,rpm-pm8018-regulators",
+ .data = &rpm_pm8018_regulators },
{ .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators },
{ .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators },
{ .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators },
--
1.9.1
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v4 4/4] regulator: qcom_rpm-regulator: Add support for pm8018 rpm regulator
@ 2016-08-11 13:16 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2016-08-11 13:16 UTC (permalink / raw)
To: andy.gross, david.brown, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni
Cc: Neil Armstrong, linux-input, linux-kernel, linux-arm-msm,
linux-soc, rtc-linux
In order to support the Qualcomm MDM9615 SoC, add support for the
PM8018 RPM regulator in the qcom_rpm-regulator driver.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 14 +++++
drivers/regulator/qcom_rpm-regulator.c | 66 ++++++++++++++++++++++
2 files changed, 80 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
index 72d68d4..485bc59 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
@@ -60,6 +60,7 @@ Regulator nodes are identified by their compatible:
"qcom,rpm-pm8058-regulators"
"qcom,rpm-pm8901-regulators"
"qcom,rpm-pm8921-regulators"
+ "qcom,rpm-pm8018-regulators"
- vdd_l0_l1_lvs-supply:
- vdd_l2_l11_l12-supply:
@@ -138,6 +139,15 @@ Regulator nodes are identified by their compatible:
Definition: reference to regulator supplying the input pin, as
described in the data sheet
+- vin_lvs1-supply:
+- vdd_l7-supply:
+- vdd_l8-supply:
+- vdd_l9_l10_l11_l12-supply:
+ Usage: optional (pm8018 only)
+ Value type: <phandle>
+ Definition: reference to regulator supplying the input pin, as
+ described in the data sheet
+
The regulator node houses sub-nodes for each regulator within the device. Each
sub-node is identified using the node's name, with valid values listed for each
of the pmics below.
@@ -157,6 +167,10 @@ pm8921:
l29, lvs1, lvs2, lvs3, lvs4, lvs5, lvs6, lvs7, usb-switch, hdmi-switch,
ncp
+pm8018:
+ s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+ l12, l14, lvs1
+
The content of each sub-node is defined by the standard binding for regulators -
see regulator.txt - with additional custom properties described below:
diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c
index e254272..1b2acc4 100644
--- a/drivers/regulator/qcom_rpm-regulator.c
+++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -448,6 +448,44 @@ static struct regulator_ops switch_ops = {
};
/*
+ * PM8018 regulators
+ */
+static const struct qcom_rpm_reg pm8018_pldo = {
+ .desc.linear_ranges = pldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
+ .desc.n_voltages = 161,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8018_nldo = {
+ .desc.linear_ranges = nldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
+ .desc.n_voltages = 64,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8018_smps = {
+ .desc.linear_ranges = smps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges),
+ .desc.n_voltages = 154,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_smps_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8018_switch = {
+ .desc.ops = &switch_ops,
+ .parts = &rpm8960_switch_parts,
+};
+
+/*
* PM8058 regulators
*/
static const struct qcom_rpm_reg pm8058_pldo = {
@@ -755,6 +793,32 @@ struct rpm_regulator_data {
const char *supply;
};
+static const struct rpm_regulator_data rpm_pm8018_regulators[] = {
+ { "s1", QCOM_RPM_PM8018_SMPS1, &pm8018_smps, "vdd_s1" },
+ { "s2", QCOM_RPM_PM8018_SMPS2, &pm8018_smps, "vdd_s2" },
+ { "s3", QCOM_RPM_PM8018_SMPS3, &pm8018_smps, "vdd_s3" },
+ { "s4", QCOM_RPM_PM8018_SMPS4, &pm8018_smps, "vdd_s4" },
+ { "s5", QCOM_RPM_PM8018_SMPS5, &pm8018_smps, "vdd_s5" },
+
+ { "l2", QCOM_RPM_PM8018_LDO2, &pm8018_pldo, "vdd_l2" },
+ { "l3", QCOM_RPM_PM8018_LDO3, &pm8018_pldo, "vdd_l3" },
+ { "l4", QCOM_RPM_PM8018_LDO4, &pm8018_pldo, "vdd_l4" },
+ { "l5", QCOM_RPM_PM8018_LDO5, &pm8018_pldo, "vdd_l5" },
+ { "l6", QCOM_RPM_PM8018_LDO6, &pm8018_pldo, "vdd_l7" },
+ { "l7", QCOM_RPM_PM8018_LDO7, &pm8018_pldo, "vdd_l7" },
+ { "l8", QCOM_RPM_PM8018_LDO8, &pm8018_nldo, "vdd_l8" },
+ { "l9", QCOM_RPM_PM8018_LDO9, &pm8921_nldo1200,
+ "vdd_l9_l10_l11_l12" },
+ { "l10", QCOM_RPM_PM8018_LDO10, &pm8018_nldo, "vdd_l9_l10_l11_l12" },
+ { "l11", QCOM_RPM_PM8018_LDO11, &pm8018_nldo, "vdd_l9_l10_l11_l12" },
+ { "l12", QCOM_RPM_PM8018_LDO12, &pm8018_nldo, "vdd_l9_l10_l11_l12" },
+ { "l14", QCOM_RPM_PM8018_LDO14, &pm8018_pldo, "vdd_l14" },
+
+ { "lvs1", QCOM_RPM_PM8018_LVS1, &pm8018_switch, "lvs1_in" },
+
+ { }
+};
+
static const struct rpm_regulator_data rpm_pm8058_regulators[] = {
{ "l0", QCOM_RPM_PM8058_LDO0, &pm8058_nldo, "vdd_l0_l1_lvs" },
{ "l1", QCOM_RPM_PM8058_LDO1, &pm8058_nldo, "vdd_l0_l1_lvs" },
@@ -870,6 +934,8 @@ static const struct rpm_regulator_data rpm_pm8921_regulators[] = {
};
static const struct of_device_id rpm_of_match[] = {
+ { .compatible = "qcom,rpm-pm8018-regulators",
+ .data = &rpm_pm8018_regulators },
{ .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators },
{ .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators },
{ .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators },
--
1.9.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [GIT PULL] Immutable branch between MFD, Regulator and RTC
2016-08-11 13:16 ` Neil Armstrong
(?)
@ 2016-08-31 8:38 ` Lee Jones
-1 siblings, 0 replies; 21+ messages in thread
From: Lee Jones @ 2016-08-31 8:38 UTC (permalink / raw)
To: Neil Armstrong
Cc: andy.gross-QSEj5FYQhm4dnm+yROfE0A,
david.brown-QSEj5FYQhm4dnm+yROfE0A,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w, broonie-DgEjT+Ai2ygdnm+yROfE0A,
a.zummo-BfzFCNDTiLLj+vYz1yj4TQ,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
linux-input-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA,
linux-soc-u79uwXL29TY76Z2rM5mHXA,
rtc-linux-/JYPxA39Uh5TLH3MbocFFw
Enjoy!
The following changes since commit 694d0d0bb2030d2e36df73e2d23d5770511dbc8d:
Linux 4.8-rc2 (2016-08-14 19:11:36 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git tags/ib-mfd-regulator-rtc-v4.9
for you to fetch changes up to ddc085d44dd001e65eecd0a8bf05064bff063668:
regulator: qcom_rpm-regulator: Add support for pm8018 rpm regulator (2016-08-31 09:33:54 +0100)
----------------------------------------------------------------
Immutable branch between MFD, Regulator and RTC due for the v4.9 merge window.
----------------------------------------------------------------
Neil Armstrong (4):
mfd: pm8921: Add support for pm8018
rtc: rtc-pm8xxx: Add support for pm8018 rtc
mfd: qcom-rpm: Add support for pm8018 RPM Regulator
regulator: qcom_rpm-regulator: Add support for pm8018 rpm regulator
.../devicetree/bindings/mfd/qcom-pm8xxx.txt | 1 +
Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 15 +++++
drivers/mfd/pm8921-core.c | 1 +
drivers/mfd/qcom_rpm.c | 51 +++++++++++++++++
drivers/regulator/qcom_rpm-regulator.c | 66 ++++++++++++++++++++++
drivers/rtc/rtc-pm8xxx.c | 1 +
include/dt-bindings/mfd/qcom-rpm.h | 22 ++++++++
7 files changed, 157 insertions(+)
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply [flat|nested] 21+ messages in thread* [rtc-linux] [GIT PULL] Immutable branch between MFD, Regulator and RTC
@ 2016-08-31 8:38 ` Lee Jones
0 siblings, 0 replies; 21+ messages in thread
From: Lee Jones @ 2016-08-31 8:38 UTC (permalink / raw)
To: Neil Armstrong
Cc: andy.gross, david.brown, lgirdwood, broonie, a.zummo,
alexandre.belloni, linux-input, linux-kernel, linux-arm-msm,
linux-soc, rtc-linux
Enjoy!
The following changes since commit 694d0d0bb2030d2e36df73e2d23d5770511dbc8d=
:
Linux 4.8-rc2 (2016-08-14 19:11:36 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git tags/ib-mfd-reg=
ulator-rtc-v4.9
for you to fetch changes up to ddc085d44dd001e65eecd0a8bf05064bff063668:
regulator: qcom_rpm-regulator: Add support for pm8018 rpm regulator (2016=
-08-31 09:33:54 +0100)
----------------------------------------------------------------
Immutable branch between MFD, Regulator and RTC due for the v4.9 merge wind=
ow.
----------------------------------------------------------------
Neil Armstrong (4):
mfd: pm8921: Add support for pm8018
rtc: rtc-pm8xxx: Add support for pm8018 rtc
mfd: qcom-rpm: Add support for pm8018 RPM Regulator
regulator: qcom_rpm-regulator: Add support for pm8018 rpm regulator
.../devicetree/bindings/mfd/qcom-pm8xxx.txt | 1 +
Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 15 +++++
drivers/mfd/pm8921-core.c | 1 +
drivers/mfd/qcom_rpm.c | 51 +++++++++++++++++
drivers/regulator/qcom_rpm-regulator.c | 66 ++++++++++++++++++=
++++
drivers/rtc/rtc-pm8xxx.c | 1 +
include/dt-bindings/mfd/qcom-rpm.h | 22 ++++++++
7 files changed, 157 insertions(+)
--=20
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org =E2=94=82 Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--=20
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---=20
You received this message because you are subscribed to the Google Groups "=
rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an e=
mail to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply [flat|nested] 21+ messages in thread* [GIT PULL] Immutable branch between MFD, Regulator and RTC
@ 2016-08-31 8:38 ` Lee Jones
0 siblings, 0 replies; 21+ messages in thread
From: Lee Jones @ 2016-08-31 8:38 UTC (permalink / raw)
To: Neil Armstrong
Cc: andy.gross, david.brown, lgirdwood, broonie, a.zummo,
alexandre.belloni, linux-input, linux-kernel, linux-arm-msm,
linux-soc, rtc-linux
Enjoy!
The following changes since commit 694d0d0bb2030d2e36df73e2d23d5770511dbc8d:
Linux 4.8-rc2 (2016-08-14 19:11:36 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git tags/ib-mfd-regulator-rtc-v4.9
for you to fetch changes up to ddc085d44dd001e65eecd0a8bf05064bff063668:
regulator: qcom_rpm-regulator: Add support for pm8018 rpm regulator (2016-08-31 09:33:54 +0100)
----------------------------------------------------------------
Immutable branch between MFD, Regulator and RTC due for the v4.9 merge window.
----------------------------------------------------------------
Neil Armstrong (4):
mfd: pm8921: Add support for pm8018
rtc: rtc-pm8xxx: Add support for pm8018 rtc
mfd: qcom-rpm: Add support for pm8018 RPM Regulator
regulator: qcom_rpm-regulator: Add support for pm8018 rpm regulator
.../devicetree/bindings/mfd/qcom-pm8xxx.txt | 1 +
Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 15 +++++
drivers/mfd/pm8921-core.c | 1 +
drivers/mfd/qcom_rpm.c | 51 +++++++++++++++++
drivers/regulator/qcom_rpm-regulator.c | 66 ++++++++++++++++++++++
drivers/rtc/rtc-pm8xxx.c | 1 +
include/dt-bindings/mfd/qcom-rpm.h | 22 ++++++++
7 files changed, 157 insertions(+)
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 21+ messages in thread