* Skylake graphics regression: projector failure with 4.8-rc3
@ 2016-08-26 13:10 ` James Bottomley
0 siblings, 0 replies; 17+ messages in thread
From: James Bottomley @ 2016-08-26 13:10 UTC (permalink / raw)
To: intel-gfx, dri-devel; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 622 bytes --]
We seem to have an xrandr regression with skylake now. What's
happening is that I can get output on to a projector, but the system is
losing video when I change the xrandr sessions (like going from a -
-above b to a --same-as b). The main screen goes blank, which is
basically a reboot situation. Unfortunately, I can't seem to get the
logs out of systemd to see if there was a dump to dmesg (the system was
definitely responding).
I fell back to 4.6.2 which worked perfectly, so this is definitely some
sort of regression. I'll be able to debug more fully when I get back
home from the Linux Security Summit.
James
[-- Attachment #2: Xorg.0.log --]
[-- Type: text/x-log, Size: 27983 bytes --]
[ 13.504]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[ 13.504] X Protocol Version 11, Revision 0
[ 13.504] Build Operating System: openSUSE SUSE LINUX
[ 13.504] Current Operating System: Linux jarvis 4.7.0-rc1+ #1 SMP PREEMPT Mon May 30 12:29:53 PDT 2016 x86_64
[ 13.504] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-test root=UUID=994363fd-c12c-4c6c-92e9-85e8ac695cf9 ro resume=/dev/nvme0n1p2 splash=silent quiet showopts pcie_aspm=force
[ 13.504] Build Date: 07 March 2016 08:22:28AM
[ 13.504]
[ 13.504] Current version of pixman: 0.32.6
[ 13.504] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.504] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.504] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 30 12:40:53 2016
[ 13.504] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13.504] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13.504] (==) No Layout section. Using the first Screen section.
[ 13.504] (==) No screen section available. Using defaults.
[ 13.504] (**) |-->Screen "Default Screen Section" (0)
[ 13.504] (**) | |-->Monitor "<default monitor>"
[ 13.505] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 13.505] (==) Automatically adding devices
[ 13.505] (==) Automatically enabling devices
[ 13.505] (==) Automatically adding GPU devices
[ 13.509] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[ 13.509] Entry deleted from font path.
[ 13.509] (==) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/ghostscript/,
/usr/share/fonts/cyrillic:unscaled,
/usr/share/fonts/truetype/,
built-ins
[ 13.509] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 13.509] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 13.509] (II) Loader magic: 0x80dd00
[ 13.509] (II) Module ABI versions:
[ 13.509] X.Org ANSI C Emulation: 0.4
[ 13.509] X.Org Video Driver: 19.0
[ 13.509] X.Org XInput driver : 21.0
[ 13.509] X.Org Server Extension : 9.0
[ 13.509] (++) using VT number 7
[ 13.509] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 13.510] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13.925] (--) PCI:*(0:0:2:0) 8086:1916:1028:0704 rev 7, Mem @ 0xdb000000/16777216, 0x90000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 13.925] (II) LoadModule: "glx"
[ 13.926] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 13.930] (II) Module glx: vendor="X.Org Foundation"
[ 13.930] compiled for 1.17.2, module version = 1.0.0
[ 13.931] ABI class: X.Org Server Extension, version 9.0
[ 13.931] (==) AIGLX enabled
[ 13.931] (==) Matched intel as autoconfigured driver 0
[ 13.931] (==) Matched intel as autoconfigured driver 1
[ 13.931] (==) Matched modesetting as autoconfigured driver 2
[ 13.931] (==) Matched fbdev as autoconfigured driver 3
[ 13.931] (==) Matched vesa as autoconfigured driver 4
[ 13.931] (==) Assigned the driver to the xf86ConfigLayout
[ 13.931] (II) LoadModule: "intel"
[ 13.931] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 13.932] (II) Module intel: vendor="X.Org Foundation"
[ 13.932] compiled for 1.17.2, module version = 2.99.917
[ 13.932] Module class: X.Org Video Driver
[ 13.932] ABI class: X.Org Video Driver, version 19.0
[ 13.932] (II) LoadModule: "modesetting"
[ 13.932] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 13.932] (II) Module modesetting: vendor="X.Org Foundation"
[ 13.932] compiled for 1.17.2, module version = 1.17.2
[ 13.932] Module class: X.Org Video Driver
[ 13.932] ABI class: X.Org Video Driver, version 19.0
[ 13.932] (II) LoadModule: "fbdev"
[ 13.933] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 13.933] (II) Module fbdev: vendor="X.Org Foundation"
[ 13.933] compiled for 1.17.2, module version = 0.4.4
[ 13.933] Module class: X.Org Video Driver
[ 13.933] ABI class: X.Org Video Driver, version 19.0
[ 13.933] (II) LoadModule: "vesa"
[ 13.933] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 13.933] (II) Module vesa: vendor="X.Org Foundation"
[ 13.933] compiled for 1.17.2, module version = 2.3.4
[ 13.933] Module class: X.Org Video Driver
[ 13.933] ABI class: X.Org Video Driver, version 19.0
[ 13.933] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 13.934] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 13.934] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 13.934] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 13.934] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 13.934] (II) FBDEV: driver for framebuffer: fbdev
[ 13.934] (II) VESA: driver for VESA chipsets: vesa
[ 13.934] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160425
[ 13.935] (WW) Falling back to old probe method for modesetting
[ 13.935] (WW) Falling back to old probe method for fbdev
[ 13.935] (II) Loading sub module "fbdevhw"
[ 13.935] (II) LoadModule: "fbdevhw"
[ 13.935] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 13.935] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 13.935] compiled for 1.17.2, module version = 0.0.2
[ 13.935] ABI class: X.Org Video Driver, version 19.0
[ 13.935] (WW) Falling back to old probe method for vesa
[ 13.936] (--) intel(0): gen9 engineering sample
[ 13.936] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[ 13.936] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 13.936] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 13.936] (==) intel(0): RGB weight 888
[ 13.936] (==) intel(0): Default visual is TrueColor
[ 13.937] (II) intel(0): Output eDP1 has no monitor section
[ 13.952] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 13.952] (II) intel(0): Enabled output eDP1
[ 13.952] (II) intel(0): Output DP1 has no monitor section
[ 13.952] (II) intel(0): Enabled output DP1
[ 13.952] (II) intel(0): Output HDMI1 has no monitor section
[ 13.952] (II) intel(0): Enabled output HDMI1
[ 13.952] (II) intel(0): Output DP2 has no monitor section
[ 13.952] (II) intel(0): Enabled output DP2
[ 13.952] (II) intel(0): Output HDMI2 has no monitor section
[ 13.952] (II) intel(0): Enabled output HDMI2
[ 13.952] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 13.953] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 13.953] (II) intel(0): Enabled output VIRTUAL1
[ 13.953] (--) intel(0): Output eDP1 using initial mode 3200x1800 on pipe 0
[ 13.953] (==) intel(0): TearFree disabled
[ 13.953] (==) intel(0): DPI set to (96, 96)
[ 13.953] (II) Loading sub module "dri2"
[ 13.953] (II) LoadModule: "dri2"
[ 13.953] (II) Module "dri2" already built-in
[ 13.953] (II) Loading sub module "present"
[ 13.953] (II) LoadModule: "present"
[ 13.953] (II) Module "present" already built-in
[ 13.953] (II) UnloadModule: "modesetting"
[ 13.953] (II) Unloading modesetting
[ 13.953] (II) UnloadModule: "fbdev"
[ 13.953] (II) Unloading fbdev
[ 13.953] (II) UnloadSubModule: "fbdevhw"
[ 13.953] (II) Unloading fbdevhw
[ 13.953] (II) UnloadModule: "vesa"
[ 13.953] (II) Unloading vesa
[ 13.953] (==) Depth 24 pixmap format is 32 bpp
[ 13.954] (II) intel(0): SNA initialized with generic backend
[ 13.954] (==) intel(0): Backing store enabled
[ 13.954] (==) intel(0): Silken mouse enabled
[ 13.954] (II) intel(0): HW Cursor enabled
[ 13.954] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 13.954] (==) intel(0): DPMS enabled
[ 13.954] (==) intel(0): display hotplug detection enabled
[ 13.954] (II) intel(0): Textured video not supported on this hardware
[ 13.954] (II) intel(0): [DRI2] Setup complete
[ 13.954] (II) intel(0): [DRI2] DRI driver: i965
[ 13.954] (II) intel(0): [DRI2] VDPAU driver: i965
[ 13.954] (II) intel(0): direct rendering: DRI2 enabled
[ 13.954] (II) intel(0): hardware support for Present enabled
[ 13.954] (--) RandR disabled
[ 13.988] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 13.988] (II) AIGLX: enabled GLX_ARB_create_context
[ 13.988] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 13.988] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 13.988] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 13.988] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 13.988] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 13.988] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 13.988] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 13.988] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 13.988] (II) AIGLX: Loaded and initialized i965
[ 13.988] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 14.001] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 14.014] (II) intel(0): Setting screen physical size to 846 x 476
[ 14.077] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 14.077] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.077] (**) Power Button: Applying InputClass "system-keyboard"
[ 14.077] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.077] (II) LoadModule: "evdev"
[ 14.077] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 14.078] (II) Module evdev: vendor="X.Org Foundation"
[ 14.078] compiled for 1.17.2, module version = 2.9.2
[ 14.078] Module class: X.Org XInput Driver
[ 14.078] ABI class: X.Org XInput driver, version 21.0
[ 14.078] (II) Using input driver 'evdev' for 'Power Button'
[ 14.078] (**) Power Button: always reports core events
[ 14.078] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 14.078] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.078] (--) evdev: Power Button: Found keys
[ 14.078] (II) evdev: Power Button: Configuring as keyboard
[ 14.078] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[ 14.078] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 14.078] (**) Option "xkb_rules" "evdev"
[ 14.078] (**) Option "xkb_model" "pc104"
[ 14.078] (**) Option "xkb_layout" "us"
[ 14.093] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 14.093] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 14.093] (**) Video Bus: Applying InputClass "system-keyboard"
[ 14.093] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 14.093] (II) Using input driver 'evdev' for 'Video Bus'
[ 14.093] (**) Video Bus: always reports core events
[ 14.093] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 14.093] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 14.093] (--) evdev: Video Bus: Found keys
[ 14.093] (II) evdev: Video Bus: Configuring as keyboard
[ 14.093] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event6"
[ 14.093] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 14.093] (**) Option "xkb_rules" "evdev"
[ 14.093] (**) Option "xkb_model" "pc104"
[ 14.093] (**) Option "xkb_layout" "us"
[ 14.093] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 14.093] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.093] (**) Power Button: Applying InputClass "system-keyboard"
[ 14.093] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.093] (II) Using input driver 'evdev' for 'Power Button'
[ 14.093] (**) Power Button: always reports core events
[ 14.093] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 14.093] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.093] (--) evdev: Power Button: Found keys
[ 14.093] (II) evdev: Power Button: Configuring as keyboard
[ 14.093] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[ 14.093] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 14.093] (**) Option "xkb_rules" "evdev"
[ 14.093] (**) Option "xkb_model" "pc104"
[ 14.093] (**) Option "xkb_layout" "us"
[ 14.094] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 14.094] (II) No input driver specified, ignoring this device.
[ 14.094] (II) This device may have been added with another device file.
[ 14.094] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 14.094] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 14.094] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 14.094] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 14.094] (II) Using input driver 'evdev' for 'Sleep Button'
[ 14.094] (**) Sleep Button: always reports core events
[ 14.094] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 14.094] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 14.094] (--) evdev: Sleep Button: Found keys
[ 14.094] (II) evdev: Sleep Button: Configuring as keyboard
[ 14.094] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event4"
[ 14.094] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 14.094] (**) Option "xkb_rules" "evdev"
[ 14.094] (**) Option "xkb_model" "pc104"
[ 14.094] (**) Option "xkb_layout" "us"
[ 14.094] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event14)
[ 14.094] (**) ELAN Touchscreen: Applying InputClass "evdev touchscreen catchall"
[ 14.094] (**) ELAN Touchscreen: Applying InputClass "evdev touchscreen catchall"
[ 14.094] (II) Using input driver 'evdev' for 'ELAN Touchscreen'
[ 14.094] (**) ELAN Touchscreen: always reports core events
[ 14.094] (**) evdev: ELAN Touchscreen: Device: "/dev/input/event14"
[ 14.094] (--) evdev: ELAN Touchscreen: Vendor 0x4f3 Product 0x20d0
[ 14.094] (--) evdev: ELAN Touchscreen: Found absolute axes
[ 14.094] (--) evdev: ELAN Touchscreen: Found absolute multitouch axes
[ 14.094] (II) evdev: ELAN Touchscreen: No buttons found, faking one.
[ 14.094] (--) evdev: ELAN Touchscreen: Found x and y absolute axes
[ 14.094] (--) evdev: ELAN Touchscreen: Found absolute touchscreen
[ 14.094] (II) evdev: ELAN Touchscreen: Configuring as touchscreen
[ 14.094] (**) evdev: ELAN Touchscreen: YAxisMapping: buttons 4 and 5
[ 14.094] (**) evdev: ELAN Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.094] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:20D0.0001/input/input15/event14"
[ 14.094] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TOUCHSCREEN, id 10)
[ 14.095] (II) evdev: ELAN Touchscreen: initialized for absolute axes.
[ 14.095] (**) ELAN Touchscreen: (accel) keeping acceleration scheme 1
[ 14.095] (**) ELAN Touchscreen: (accel) acceleration profile 0
[ 14.095] (**) ELAN Touchscreen: (accel) acceleration factor: 2.000
[ 14.095] (**) ELAN Touchscreen: (accel) acceleration threshold: 4
[ 14.095] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse1)
[ 14.095] (II) No input driver specified, ignoring this device.
[ 14.095] (II) This device may have been added with another device file.
[ 14.095] (II) config/udev: Adding input device Integrated_Webcam_HD (/dev/input/event16)
[ 14.095] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[ 14.095] (**) Integrated_Webcam_HD: Applying InputClass "system-keyboard"
[ 14.095] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[ 14.095] (II) Using input driver 'evdev' for 'Integrated_Webcam_HD'
[ 14.095] (**) Integrated_Webcam_HD: always reports core events
[ 14.095] (**) evdev: Integrated_Webcam_HD: Device: "/dev/input/event16"
[ 14.095] (--) evdev: Integrated_Webcam_HD: Vendor 0xbda Product 0x5682
[ 14.095] (--) evdev: Integrated_Webcam_HD: Found keys
[ 14.095] (II) evdev: Integrated_Webcam_HD: Configuring as keyboard
[ 14.095] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input19/event16"
[ 14.095] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD" (type: KEYBOARD, id 11)
[ 14.095] (**) Option "xkb_rules" "evdev"
[ 14.095] (**) Option "xkb_model" "pc104"
[ 14.095] (**) Option "xkb_layout" "us"
[ 14.095] (II) config/udev: Adding input device DLL0704:01 06CB:76AE Touchpad (/dev/input/event15)
[ 14.095] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "evdev touchpad catchall"
[ 14.095] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "evdev touchpad catchall"
[ 14.095] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "touchpad catchall"
[ 14.095] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "Default clickpad buttons"
[ 14.096] (II) LoadModule: "synaptics"
[ 14.096] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 14.096] (II) Module synaptics: vendor="X.Org Foundation"
[ 14.096] compiled for 1.17.2, module version = 1.8.2
[ 14.096] Module class: X.Org XInput Driver
[ 14.096] ABI class: X.Org XInput driver, version 21.0
[ 14.096] (II) Using input driver 'synaptics' for 'DLL0704:01 06CB:76AE Touchpad'
[ 14.096] (**) DLL0704:01 06CB:76AE Touchpad: always reports core events
[ 14.096] (**) Option "Device" "/dev/input/event15"
[ 14.252] (II) synaptics: DLL0704:01 06CB:76AE Touchpad: found clickpad property
[ 14.252] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: x-axis range 0 - 1216 (res 12)
[ 14.252] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: y-axis range 0 - 680 (res 12)
[ 14.252] (II) synaptics: DLL0704:01 06CB:76AE Touchpad: device does not report pressure, will use touch data.
[ 14.253] (II) synaptics: DLL0704:01 06CB:76AE Touchpad: device does not report finger width.
[ 14.253] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: buttons: left double triple
[ 14.253] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: Vendor 0x6cb Product 0x76ae
[ 14.253] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: invalid pressure range. defaulting to 0 - 255
[ 14.253] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: invalid finger width range. defaulting to 0 - 15
[ 14.253] (**) Option "HorizEdgeScroll" "off"
[ 14.253] (**) Option "TapButton1" "1"
[ 14.253] (**) Option "TapButton2" "3"
[ 14.253] (**) Option "TapButton3" "2"
[ 14.253] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 14.253] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: touchpad found
[ 14.253] (**) DLL0704:01 06CB:76AE Touchpad: always reports core events
[ 14.292] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-DLL0704:01/0018:06CB:76AE.0002/input/input17/event15"
[ 14.292] (II) XINPUT: Adding extended input device "DLL0704:01 06CB:76AE Touchpad" (type: TOUCHPAD, id 12)
[ 14.292] (**) synaptics: DLL0704:01 06CB:76AE Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 14.292] (**) synaptics: DLL0704:01 06CB:76AE Touchpad: (accel) MaxSpeed is now 1.75
[ 14.292] (**) synaptics: DLL0704:01 06CB:76AE Touchpad: (accel) AccelFactor is now 0.144
[ 14.292] (**) DLL0704:01 06CB:76AE Touchpad: (accel) keeping acceleration scheme 1
[ 14.292] (**) DLL0704:01 06CB:76AE Touchpad: (accel) acceleration profile 1
[ 14.292] (**) DLL0704:01 06CB:76AE Touchpad: (accel) acceleration factor: 2.000
[ 14.292] (**) DLL0704:01 06CB:76AE Touchpad: (accel) acceleration threshold: 4
[ 14.293] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: touchpad found
[ 14.293] (II) config/udev: Adding input device DLL0704:01 06CB:76AE Touchpad (/dev/input/mouse2)
[ 14.293] (**) DLL0704:01 06CB:76AE Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 14.294] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event9)
[ 14.294] (II) No input driver specified, ignoring this device.
[ 14.294] (II) This device may have been added with another device file.
[ 14.295] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 14.295] (II) No input driver specified, ignoring this device.
[ 14.295] (II) This device may have been added with another device file.
[ 14.295] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event11)
[ 14.295] (II) No input driver specified, ignoring this device.
[ 14.295] (II) This device may have been added with another device file.
[ 14.296] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event12)
[ 14.296] (II) No input driver specified, ignoring this device.
[ 14.296] (II) This device may have been added with another device file.
[ 14.297] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 14.297] (II) No input driver specified, ignoring this device.
[ 14.297] (II) This device may have been added with another device file.
[ 14.297] (II) config/udev: Adding input device Intel HID events (/dev/input/event7)
[ 14.297] (**) Intel HID events: Applying InputClass "evdev keyboard catchall"
[ 14.298] (**) Intel HID events: Applying InputClass "system-keyboard"
[ 14.298] (**) Intel HID events: Applying InputClass "evdev keyboard catchall"
[ 14.298] (II) Using input driver 'evdev' for 'Intel HID events'
[ 14.298] (**) Intel HID events: always reports core events
[ 14.298] (**) evdev: Intel HID events: Device: "/dev/input/event7"
[ 14.298] (--) evdev: Intel HID events: Vendor 0 Product 0
[ 14.298] (--) evdev: Intel HID events: Found keys
[ 14.298] (II) evdev: Intel HID events: Configuring as keyboard
[ 14.298] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input8/event7"
[ 14.298] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 13)
[ 14.298] (**) Option "xkb_rules" "evdev"
[ 14.298] (**) Option "xkb_model" "pc104"
[ 14.298] (**) Option "xkb_layout" "us"
[ 14.299] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 14.299] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.299] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 14.299] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.299] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 14.299] (**) AT Translated Set 2 keyboard: always reports core events
[ 14.299] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 14.300] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 14.302] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 14.302] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 14.303] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 14.303] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 14.303] (**) Option "xkb_rules" "evdev"
[ 14.303] (**) Option "xkb_model" "pc104"
[ 14.303] (**) Option "xkb_layout" "us"
[ 14.304] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[ 14.304] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 14.304] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 14.304] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 14.304] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 14.304] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 14.304] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 14.304] (**) Option "Device" "/dev/input/event1"
[ 14.368] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 14.368] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1276 - 5666 (res 0)
[ 14.368] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1118 - 4734 (res 0)
[ 14.368] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 14.368] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 14.368] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 14.368] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 14.368] (**) Option "HorizEdgeScroll" "off"
[ 14.368] (**) Option "TapButton1" "1"
[ 14.368] (**) Option "TapButton2" "3"
[ 14.368] (**) Option "TapButton3" "2"
[ 14.368] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 14.368] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 14.368] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 14.400] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[ 14.400] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[ 14.400] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 14.400] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 14.400] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[ 14.400] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 14.400] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 14.400] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 14.400] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 14.400] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 14.401] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 14.401] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 14.401] (II) config/udev: Adding input device PC Speaker (/dev/input/event13)
[ 14.401] (II) No input driver specified, ignoring this device.
[ 14.401] (II) This device may have been added with another device file.
[ 30.805] (II) intel(0): EDID vendor "SHP", prod id 5194
[ 30.806] (II) intel(0): Printing DDC gathered Modelines:
[ 30.806] (II) intel(0): Modeline "3200x1800"x0.0 373.25 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (111.1 kHz eP)
[ 30.806] (II) intel(0): Modeline "3200x1800"x0.0 298.60 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (88.9 kHz e)
[-- Attachment #3: Type: text/plain, Size: 68292 bytes --]
[ 0.000000] Linux version 4.7.0-rc1+ (jejb@jarvis) (gcc version 4.8.5 (SUSE Linux) ) #1 SMP PREEMPT Mon May 30 12:29:53 PDT 2016
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-test root=UUID=994363fd-c12c-4c6c-92e9-85e8ac695cf9 ro resume=/dev/nvme0n1p2 splash=silent quiet showopts pcie_aspm=force
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000069537fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000069538000-0x0000000069538fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000069539000-0x0000000069562fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000069563000-0x00000000695bdfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000695be000-0x0000000069daefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000069daf000-0x000000007907dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007907e000-0x00000000793f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000793f9000-0x0000000079448fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000079449000-0x0000000079c00fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000079c01000-0x000000007a4fefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007a4ff000-0x000000007a4fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007a500000-0x000000007a5fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x67823018-0x67833057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000000fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000001000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009cfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000067823017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000067823018-0x0000000067833057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000067833058-0x0000000069537fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000069538000-0x0000000069538fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000069539000-0x0000000069562fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000069563000-0x00000000695bdfff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000695be000-0x0000000069daefff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000069daf000-0x000000007907dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007907e000-0x00000000793f8fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000793f9000-0x0000000079448fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x0000000079449000-0x0000000079c00fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000079c01000-0x000000007a4fefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007a4ff000-0x000000007a4fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007a500000-0x000000007a5fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000027effffff] usable
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ACPI=0x7941a000 ACPI 2.0=0x7941a000 SMBIOS=0xf0000
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Dell Inc. XPS 13 9350/07TYC2, BIOS 1.3.3 03/01/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x27f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable
[ 0.000000] 2 base 007B800000 mask 7FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x7a500 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x0205d000, 0x0205dfff] PGTABLE
[ 0.000000] BRK [0x0205e000, 0x0205efff] PGTABLE
[ 0.000000] BRK [0x0205f000, 0x0205ffff] PGTABLE
[ 0.000000] BRK [0x02060000, 0x02060fff] PGTABLE
[ 0.000000] BRK [0x02061000, 0x02061fff] PGTABLE
[ 0.000000] BRK [0x02062000, 0x02062fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x2f71f000-0x2ff92fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000007941A000 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x000000007941A0B8 0000EC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007943A840 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000007941A230 02060D (v02 DELL CBX3 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x0000000079C00F80 000040
[ 0.000000] ACPI: APIC 0x000000007943A950 000084 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000007943A9D8 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x000000007943AA20 00009C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000007943AAC0 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000007943AB00 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
[ 0.000000] ACPI: SSDT 0x000000007943AB38 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: LPIT 0x000000007943AE50 000094 (v01 INTEL SKL-ULT 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000007943AEE8 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000007943B130 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000007943DCE0 000BE3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
[ 0.000000] ACPI: DBGP 0x000000007943E8C8 000034 (v01 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x000000007943E900 000054 (v00 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000007943E958 000737 (v02 INTEL xh_rvp07 00000000 INTL 20120913)
[ 0.000000] ACPI: BOOT 0x000000007943F090 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000007943F0B8 0035AE (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x0000000079442668 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x00000000794426B0 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: MSDM 0x0000000079443528 000055 (v03 DELL CBX3 06222004 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x0000000079443580 003AE3 (v02 DptfTa DptfTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SLIC 0x0000000079447068 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.000000] ACPI: TCPA 0x00000000794471E0 000032 (v02 ALASKA NAPAASF 00000001 MSFT 01000013)
[ 0.000000] ACPI: BGRT 0x0000000079447218 000038 (v00 ?\xffffffcdq{ 01072009 AMI 00010013)
[ 0.000000] ACPI: DMAR 0x0000000079447250 0000F0 (v01 INTEL SKL 00000001 INTL 00000001)
[ 0.000000] ACPI: ASF! 0x0000000079447340 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x27efeb000-0x27effcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000027effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000069537fff]
[ 0.000000] node 0: [mem 0x0000000069563000-0x00000000695bdfff]
[ 0.000000] node 0: [mem 0x0000000069daf000-0x000000007907dfff]
[ 0.000000] node 0: [mem 0x000000007a4ff000-0x000000007a4fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000027effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027effffff]
[ 0.000000] On node 0 totalpages: 2062334
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7650 pages used for memmap
[ 0.000000] DMA32 zone: 489571 pages, LIFO batch:31
[ 0.000000] Normal zone: 24512 pages used for memmap
[ 0.000000] Normal zone: 1568768 pages, LIFO batch:31
[ 0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED
[ 0.000000] Reserving Intel graphics stolen memory at 0x7c000000-0x7fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x67823000-0x67823fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x67833000-0x67833fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x69538000-0x69538fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x69539000-0x69562fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x695be000-0x69daefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7907e000-0x793f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x793f9000-0x79448fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79449000-0x79c00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79c01000-0x7a4fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a500000-0x7a5fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a600000-0x7bffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7c000000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff88027ec00000 s104024 r8192 d31144 u524288
[ 0.000000] pcpu-alloc: s104024 r8192 d31144 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2030087
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-test root=UUID=994363fd-c12c-4c6c-92e9-85e8ac695cf9 ro resume=/dev/nvme0n1p2 splash=silent quiet showopts pcie_aspm=force
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 3706140K/8249336K available (6701K kernel code, 1127K rwdata, 3016K rodata, 1656K init, 1648K bss, 497728K reserved, 0K cma-reserved)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:1024 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 2399.949 MHz processor
[ 0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.89 BogoMIPS (lpj=9599796)
[ 0.000030] pid_max: default: 32768 minimum: 301
[ 0.000039] ACPI: Core revision 20160422
[ 0.000922] Security Framework initialized
[ 0.000928] AppArmor: AppArmor initialized
[ 0.001447] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002952] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003608] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.003616] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.003848] CPU: Physical Processor ID: 0
[ 0.003849] CPU: Processor Core ID: 0
[ 0.003853] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.003854] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.003858] mce: CPU supports 8 MCE banks
[ 0.003867] CPU0: Thermal monitoring enabled (TM1)
[ 0.003890] process: using mwait in idle threads
[ 0.003892] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.003893] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.004255] Freeing SMP alternatives memory: 24K (ffffffff81eb9000 - ffffffff81ebf000)
[ 0.016195] ftrace: allocating 26970 entries in 106 pages
[ 0.027589] smpboot: Max logical packages: 2
[ 0.027591] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.027596] DMAR: Host address width 39
[ 0.027597] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.027604] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[ 0.027606] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.027610] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.027612] DMAR: RMRR base: 0x0000007918b000 end: 0x000000791aafff
[ 0.027613] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
[ 0.027614] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.027615] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.027617] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.027618] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.027619] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.027620] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.027810] DMAR: DRHD: handling fault status reg 2
[ 0.027815] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 6824 [fault reason 37] Blocked a compatibility format interrupt request
[ 0.029049] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.029050] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.033157] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072848] TSC deadline timer enabled
[ 0.072853] smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3)
[ 0.072857] Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver.
[ 0.072886] ... version: 4
[ 0.072887] ... bit width: 48
[ 0.072888] ... generic registers: 4
[ 0.072888] ... value mask: 0000ffffffffffff
[ 0.072889] ... max period: 0000ffffffffffff
[ 0.072890] ... fixed-purpose events: 3
[ 0.072891] ... event mask: 000000070000000f
[ 0.097018] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.117030] x86: Booting SMP configuration:
[ 0.117031] .... node #0, CPUs: #1 #2 #3
[ 0.391196] x86: Booted up 1 node, 4 CPUs
[ 0.391200] smpboot: Total of 4 processors activated (19202.81 BogoMIPS)
[ 0.410714] node 0 initialised, 1011367 pages in 12ms
[ 0.419179] devtmpfs: initialized
[ 0.419243] x86/mm: Memory block size: 128MB
[ 0.427205] PM: Registering ACPI NVS region [mem 0x69538000-0x69538fff] (4096 bytes)
[ 0.427207] PM: Registering ACPI NVS region [mem 0x79449000-0x79c00fff] (8093696 bytes)
[ 0.427409] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.439085] pinctrl core: initialized pinctrl subsystem
[ 0.439204] RTC time: 19:40:40, date: 05/30/16
[ 0.451932] NET: Registered protocol family 16
[ 0.463116] cpuidle: using governor ladder
[ 0.475135] cpuidle: using governor menu
[ 0.475184] Simple Boot Flag at 0x47 set to 0x80
[ 0.475214] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.475217] ACPI: bus type PCI registered
[ 0.475219] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.495271] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.495273] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.495280] PCI: Using configuration type 1 for base access
[ 0.495285] dmi type 0xB1 record - unknown flag
[ 0.519287] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.519288] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.539282] ACPI: Added _OSI(Module Device)
[ 0.539283] ACPI: Added _OSI(Processor Device)
[ 0.539284] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.539286] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.567786] ACPI: Executed 21 blocks of module-level executable AML code
[ 0.579489] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.583484] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.599042] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.706018] ACPI: Dynamic OEM Table Load:
[ 0.706025] ACPI: SSDT 0xFFFF88027EBDA800 00061E (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.707109] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.708603] ACPI: Dynamic OEM Table Load:
[ 0.708609] ACPI: SSDT 0xFFFF88027EC37000 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.710463] ACPI: Dynamic OEM Table Load:
[ 0.710468] ACPI: SSDT 0xFFFF88027EBDA000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.711960] ACPI: Dynamic OEM Table Load:
[ 0.711965] ACPI: SSDT 0xFFFF88027ED46E00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.715042] ACPI: Interpreter enabled
[ 0.715076] ACPI: (supports S0 S3 S4 S5)
[ 0.715077] ACPI: Using IOAPIC for interrupt routing
[ 0.715115] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.717346] ACPI: Power Resource [PG00] (on)
[ 0.717781] ACPI: Power Resource [PG01] (on)
[ 0.718200] ACPI: Power Resource [PG02] (on)
[ 0.720297] ACPI: Power Resource [WRST] (off)
[ 0.720722] ACPI: Power Resource [WRST] (off)
[ 0.721145] ACPI: Power Resource [WRST] (off)
[ 0.721566] ACPI: Power Resource [WRST] (off)
[ 0.721994] ACPI: Power Resource [WRST] (off)
[ 0.722416] ACPI: Power Resource [WRST] (off)
[ 0.722837] ACPI: Power Resource [WRST] (off)
[ 0.723258] ACPI: Power Resource [WRST] (off)
[ 0.723679] ACPI: Power Resource [WRST] (off)
[ 0.724128] ACPI: Power Resource [WRST] (off)
[ 0.724556] ACPI: Power Resource [WRST] (off)
[ 0.724975] ACPI: Power Resource [WRST] (off)
[ 0.725397] ACPI: Power Resource [WRST] (off)
[ 0.725822] ACPI: Power Resource [WRST] (off)
[ 0.726244] ACPI: Power Resource [WRST] (off)
[ 0.726665] ACPI: Power Resource [WRST] (off)
[ 0.727085] ACPI: Power Resource [WRST] (off)
[ 0.727508] ACPI: Power Resource [WRST] (off)
[ 0.727927] ACPI: Power Resource [WRST] (off)
[ 0.728350] ACPI: Power Resource [WRST] (off)
[ 0.744692] ACPI: Power Resource [FN00] (off)
[ 0.744822] ACPI: Power Resource [FN01] (off)
[ 0.744948] ACPI: Power Resource [FN02] (off)
[ 0.745074] ACPI: Power Resource [FN03] (off)
[ 0.745199] ACPI: Power Resource [FN04] (off)
[ 0.746565] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.746572] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.746621] \_SB_.PCI0 (33DB4D5B-1FF7-401C-9657-7441C03DD766): _OSC invalid UUID
[ 0.746621] _OSC request data: 1 1f 0
[ 0.746625] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.747356] PCI host bridge to bus 0000:00
[ 0.747359] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.747360] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.747362] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.747363] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.747364] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.747366] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.747367] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.747368] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.747370] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.747371] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.747372] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.747373] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.747375] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.747376] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.747377] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[ 0.747378] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.747380] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.747387] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[ 0.747537] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
[ 0.747546] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
[ 0.747552] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.747557] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.747722] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.747732] pci 0000:00:04.0: reg 0x10: [mem 0xdc320000-0xdc327fff 64bit]
[ 0.747962] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.747982] pci 0000:00:14.0: reg 0x10: [mem 0xdc310000-0xdc31ffff 64bit]
[ 0.748054] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.748191] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.748232] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.748252] pci 0000:00:14.2: reg 0x10: [mem 0xdc338000-0xdc338fff 64bit]
[ 0.748527] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[ 0.748735] pci 0000:00:15.0: reg 0x10: [mem 0xdc337000-0xdc337fff 64bit]
[ 0.749712] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[ 0.749908] pci 0000:00:15.1: reg 0x10: [mem 0xdc336000-0xdc336fff 64bit]
[ 0.750821] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.750840] pci 0000:00:16.0: reg 0x10: [mem 0xdc335000-0xdc335fff 64bit]
[ 0.750909] pci 0000:00:16.0: PME# supported from D3hot
[ 0.751080] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 0.751097] pci 0000:00:17.0: reg 0x10: [mem 0xdc330000-0xdc331fff]
[ 0.751106] pci 0000:00:17.0: reg 0x14: [mem 0xdc334000-0xdc3340ff]
[ 0.751115] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.751124] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.751133] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.751142] pci 0000:00:17.0: reg 0x24: [mem 0xdc333000-0xdc3337ff]
[ 0.751187] pci 0000:00:17.0: PME# supported from D3hot
[ 0.751361] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 0.751434] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.751602] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.751651] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[ 0.751724] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.751889] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.751927] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[ 0.751996] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.752159] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.752203] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[ 0.752269] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.752430] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.752498] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
[ 0.752755] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.752766] pci 0000:00:1f.2: reg 0x10: [mem 0xdc32c000-0xdc32ffff]
[ 0.752959] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040380
[ 0.752981] pci 0000:00:1f.3: reg 0x10: [mem 0xdc328000-0xdc32bfff 64bit]
[ 0.753008] pci 0000:00:1f.3: reg 0x20: [mem 0xdc300000-0xdc30ffff 64bit]
[ 0.753058] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.753247] pci 0000:00:1f.3: System wakeup disabled by ACPI
[ 0.753290] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.753337] pci 0000:00:1f.4: reg 0x10: [mem 0xdc332000-0xdc3320ff 64bit]
[ 0.753409] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.753739] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.753744] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.753749] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.753896] pci 0000:3a:00.0: [8086:095a] type 00 class 0x028000
[ 0.753939] pci 0000:3a:00.0: reg 0x10: [mem 0xdc200000-0xdc201fff 64bit]
[ 0.754121] pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold
[ 0.754254] pci 0000:3a:00.0: System wakeup disabled by ACPI
[ 0.758452] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.758457] pci 0000:00:1c.4: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.758588] pci 0000:3b:00.0: [10ec:525a] type 00 class 0xff0000
[ 0.758616] pci 0000:3b:00.0: reg 0x14: [mem 0xdc100000-0xdc100fff]
[ 0.758729] pci 0000:3b:00.0: supports D1 D2
[ 0.758731] pci 0000:3b:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.758828] pci 0000:3b:00.0: System wakeup disabled by ACPI
[ 0.766450] pci 0000:00:1c.5: PCI bridge to [bus 3b]
[ 0.766455] pci 0000:00:1c.5: bridge window [mem 0xdc100000-0xdc1fffff]
[ 0.766574] pci 0000:3c:00.0: [144d:a802] type 00 class 0x010802
[ 0.766594] pci 0000:3c:00.0: reg 0x10: [mem 0xdc000000-0xdc003fff 64bit]
[ 0.766604] pci 0000:3c:00.0: reg 0x18: [io 0xe000-0xe0ff]
[ 0.766799] pci 0000:3c:00.0: System wakeup disabled by ACPI
[ 0.774466] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[ 0.774469] pci 0000:00:1d.0: bridge window [io 0xe000-0xefff]
[ 0.774472] pci 0000:00:1d.0: bridge window [mem 0xdc000000-0xdc0fffff]
[ 0.776941] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.777016] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.777088] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.777159] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.777230] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.777301] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.777376] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.777448] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.779945] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.781038] ACPI : EC: GPE = 0x14, I/O: command/status = 0x934, data = 0x930
[ 0.781040] ACPI : EC: EC started
[ 0.812407] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.812409] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.812412] vgaarb: loaded
[ 0.812413] vgaarb: bridge control possible 0000:00:02.0
[ 0.822633] SCSI subsystem initialized
[ 0.822668] libata version 3.00 loaded.
[ 0.822762] PCI: Using ACPI for IRQ routing
[ 0.846790] PCI: pci_cache_line_size set to 64 bytes
[ 0.846934] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.846935] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.846936] e820: reserve RAM buffer [mem 0x67823018-0x67ffffff]
[ 0.846938] e820: reserve RAM buffer [mem 0x69538000-0x6bffffff]
[ 0.846939] e820: reserve RAM buffer [mem 0x695be000-0x6bffffff]
[ 0.846940] e820: reserve RAM buffer [mem 0x7907e000-0x7bffffff]
[ 0.846942] e820: reserve RAM buffer [mem 0x7a500000-0x7bffffff]
[ 0.846943] e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff]
[ 0.847030] NetLabel: Initializing
[ 0.847031] NetLabel: domain hash size = 128
[ 0.847032] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.847043] NetLabel: unlabeled traffic allowed by default
[ 0.847135] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.847140] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.849186] clocksource: Switched to clocksource hpet
[ 0.854773] VFS: Disk quotas dquot_6.6.0
[ 0.865242] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.881280] AppArmor: AppArmor Filesystem Enabled
[ 0.881311] pnp: PnP ACPI init
[ 0.881558] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.881560] system 00:00: [io 0xffff] has been reserved
[ 0.881562] system 00:00: [io 0xffff] has been reserved
[ 0.881563] system 00:00: [io 0xffff] has been reserved
[ 0.881565] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.881566] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.881570] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.881666] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.881710] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.881713] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.881817] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.881839] pnp 00:04: Plug and Play ACPI device, IDs DLL0704 PNP0f13 (active)
[ 0.882113] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.882114] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.882116] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.882118] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.882119] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.882121] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.882122] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.882124] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.882126] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.882128] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.882130] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.882178] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.882180] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.882182] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.882183] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.882185] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.882187] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.882189] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.882191] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.882489] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.882491] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.883799] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.883801] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.883803] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.884590] pnp 00:09: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.890429] pnp: PnP ACPI: found 10 devices
[ 0.898990] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.899003] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-39] add_size 1000
[ 0.899024] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.899026] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.899029] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.899032] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.899034] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.899038] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.899041] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.899046] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.899050] pci 0000:00:1c.4: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.899057] pci 0000:00:1c.5: PCI bridge to [bus 3b]
[ 0.899061] pci 0000:00:1c.5: bridge window [mem 0xdc100000-0xdc1fffff]
[ 0.899068] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[ 0.899070] pci 0000:00:1d.0: bridge window [io 0xe000-0xefff]
[ 0.899073] pci 0000:00:1d.0: bridge window [mem 0xdc000000-0xdc0fffff]
[ 0.899080] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.899082] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.899083] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.899085] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.899086] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.899087] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.899088] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.899090] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.899091] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.899092] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.899094] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.899095] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.899096] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.899098] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.899099] pci_bus 0000:00: resource 18 [mem 0x80000000-0xdfffffff window]
[ 0.899100] pci_bus 0000:00: resource 19 [mem 0xfd000000-0xfe7fffff window]
[ 0.899102] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.899103] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff]
[ 0.899104] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.899106] pci_bus 0000:3a: resource 1 [mem 0xdc200000-0xdc2fffff]
[ 0.899107] pci_bus 0000:3b: resource 1 [mem 0xdc100000-0xdc1fffff]
[ 0.899109] pci_bus 0000:3c: resource 0 [io 0xe000-0xefff]
[ 0.899110] pci_bus 0000:3c: resource 1 [mem 0xdc000000-0xdc0fffff]
[ 0.965244] NET: Registered protocol family 2
[ 0.977286] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.977389] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.977490] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.977506] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.977527] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.005246] NET: Registered protocol family 1
[ 1.005259] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.006361] PCI: CLS 0 bytes, default 64
[ 1.006403] Unpacking initramfs...
[ 1.943987] Freeing initrd memory: 8656K (ffff88002f71f000 - ffff88002ff93000)
[ 1.957284] DMAR: ACPI device "device:64" under DMAR at fed91000 as 00:15.0
[ 1.957288] DMAR: ACPI device "device:65" under DMAR at fed91000 as 00:15.1
[ 1.957304] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.957313] software IO TLB [mem 0x63823000-0x67823000] (64MB) mapped at [ffff880063823000-ffff880067822fff]
[ 1.957344] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 1.957345] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 1.957346] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 1.957346] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 1.957347] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 1.957348] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 1.957416] Scanning for low memory corruption every 60 seconds
[ 1.969397] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.981268] audit: initializing netlink subsys (disabled)
[ 1.981281] audit: type=2000 audit(1464637241.940:1): initialized
[ 1.981881] workingset: timestamp_bits=35 max_order=21 bucket_order=0
[ 1.981908] zbud: loaded
[ 2.005278] Key type big_key registered
[ 2.006149] Key type asymmetric registered
[ 2.006151] Asymmetric key parser 'x509' registered
[ 2.025325] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 2.025392] io scheduler noop registered
[ 2.025393] io scheduler deadline registered
[ 2.041310] io scheduler cfq registered (default)
[ 2.041971] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.041975] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.041996] efifb: probing for efifb
[ 2.042009] efifb: framebuffer at 0x90000000, using 22500k, total 22500k
[ 2.042010] efifb: mode is 3200x1800x32, linelength=12800, pages=1
[ 2.042010] efifb: scrolling: redraw
[ 2.042012] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.053091] Console: switching to colour frame buffer device 400x112
[ 2.064037] fb0: EFI VGA frame buffer device
[ 2.064044] intel_idle: MWAIT substates: 0x11142120
[ 2.064045] intel_idle: v0.4.1 model 0x4E
[ 2.064255] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.064378] GHES: HEST is not enabled!
[ 2.064444] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
[ 2.067294] Non-volatile memory driver v1.3
[ 2.067366] Linux agpgart interface v0.103
[ 2.089302] tpm_tis 00:09: 1.2 TPM (device-id 0xFE, rev-id 2)
[ 2.185932] ahci 0000:00:17.0: version 3.0
[ 2.186112] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x0 impl SATA mode
[ 2.186114] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 2.187094] scsi host0: ahci
[ 2.187359] scsi host1: ahci
[ 2.187533] scsi host2: ahci
[ 2.187745] scsi host3: ahci
[ 2.187926] scsi host4: ahci
[ 2.188135] scsi host5: ahci
[ 2.188348] scsi host6: ahci
[ 2.188540] scsi host7: ahci
[ 2.188587] ata1: DUMMY
[ 2.188588] ata2: DUMMY
[ 2.188589] ata3: DUMMY
[ 2.188589] ata4: DUMMY
[ 2.188590] ata5: DUMMY
[ 2.188591] ata6: DUMMY
[ 2.188592] ata7: DUMMY
[ 2.188592] ata8: DUMMY
[ 2.188664] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.189190] i8042: Warning: Keylock active
[ 2.191483] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.191513] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.191675] mousedev: PS/2 mouse device common for all mice
[ 2.191934] rtc_cmos 00:01: RTC can wake from S4
[ 2.192620] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 2.192710] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.192718] intel_pstate: Intel P-state driver initializing
[ 2.192996] intel_pstate: HWP enabled
[ 2.193000] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.193001] EFI Variables Facility v0.08 2004-May-17
[ 2.193533] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.198068] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.281453] NET: Registered protocol family 10
[ 2.282117] microcode: CPU0 sig=0x406e3, pf=0x80, revision=0x82
[ 2.282125] microcode: CPU1 sig=0x406e3, pf=0x80, revision=0x82
[ 2.282143] microcode: CPU2 sig=0x406e3, pf=0x80, revision=0x82
[ 2.282156] microcode: CPU3 sig=0x406e3, pf=0x80, revision=0x82
[ 2.282244] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.282518] registered taskstats version 1
[ 2.282539] zswap: loaded using pool lzo/zbud
[ 2.289182] Key type encrypted registered
[ 2.289187] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.530880] Magic number: 0:398:699
[ 2.531100] rtc_cmos 00:01: setting system clock to 2016-05-30 19:40:42 UTC (1464637242)
[ 2.531173] PM: Checking hibernation image partition /dev/nvme0n1p2
[ 2.957305] tsc: Refined TSC clocksource calibration: 2399.992 MHz
[ 2.957308] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22982fdf183, max_idle_ns: 440795240423 ns
[ 2.999263] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4734]
[ 3.030195] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1118..]
[ 3.091716] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2a1, caps: 0xf00223/0x840300/0x12e800/0x0, board id: 3038, fw id: 2011643
[ 3.130500] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 3.133494] PM: Hibernation image not present or could not be loaded.
[ 3.134712] Freeing unused kernel memory: 1656K (ffffffff81d1b000 - ffffffff81eb9000)
[ 3.134715] Write protecting the kernel read-only data: 12288k
[ 3.135294] Freeing unused kernel memory: 1476K (ffff88000168f000 - ffff880001800000)
[ 3.138254] Freeing unused kernel memory: 1080K (ffff880001af2000 - ffff880001c00000)
[ 3.141995] random: systemd urandom read with 19 bits of entropy available
[ 3.160614] systemd[1]: systemd 210 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP +APPARMOR)
[ 3.160824] systemd[1]: Detected architecture 'x86-64'.
[ 3.160828] systemd[1]: Running in initial RAM disk.
[ 3.160910] systemd[1]: Set hostname to <jarvis>.
[ 3.208651] systemd[1]: Expecting device dev-disk-by\x2duuid-994363fd\x2dc12c\x2d4c6c\x2d92e9\x2d85e8ac695cf9.device...
[ 3.208712] systemd[1]: Starting Timers.
[ 3.208732] systemd[1]: Reached target Timers.
[ 3.208751] systemd[1]: Starting -.slice.
[ 3.224376] systemd[1]: Created slice -.slice.
[ 3.224418] systemd[1]: Starting udev Kernel Socket.
[ 3.224456] systemd[1]: Listening on udev Kernel Socket.
[ 3.224477] systemd[1]: Starting udev Control Socket.
[ 3.224516] systemd[1]: Listening on udev Control Socket.
[ 3.224535] systemd[1]: Starting Journal Socket.
[ 3.224587] systemd[1]: Listening on Journal Socket.
[ 3.224607] systemd[1]: Starting Sockets.
[ 3.224624] systemd[1]: Reached target Sockets.
[ 3.224642] systemd[1]: Starting System Slice.
[ 3.224825] systemd[1]: Created slice System Slice.
[ 3.224845] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 3.225020] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.225128] systemd[1]: Starting dracut cmdline hook...
[ 3.225710] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.226331] systemd[1]: Starting Load Kernel Modules...
[ 3.226918] systemd[1]: Starting Entropy Daemon based on the HAVEGE algorithm...
[ 3.227557] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
[ 3.228587] systemd[1]: Starting Journal Service...
[ 3.229353] systemd[1]: Starting Slices.
[ 3.229384] systemd[1]: Reached target Slices.
[ 3.229435] systemd[1]: Starting Setup Virtual Console...
[ 3.230113] systemd[1]: Starting Swap.
[ 3.230142] systemd[1]: Reached target Swap.
[ 3.230174] systemd[1]: Starting Local File Systems.
[ 3.230196] systemd[1]: Reached target Local File Systems.
[ 3.230791] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 3.231107] systemd[1]: Started Load Kernel Modules.
[ 3.232688] systemd[1]: Starting Apply Kernel Variables...
[ 3.233488] systemd[1]: Starting Create static device nodes in /dev...
[ 3.236341] systemd[1]: Started Apply Kernel Variables.
[ 3.250794] systemd[1]: Started Create static device nodes in /dev.
[ 3.265362] systemd[1]: Started Setup Virtual Console.
[ 3.276968] systemd[1]: Started Journal Service.
[ 3.440925] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 3.443016] ACPI: Lid Switch [LID0]
[ 3.443080] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 3.443254] ACPI: Power Button [PBTN]
[ 3.443310] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[ 3.443354] ACPI: Sleep Button [SBTN]
[ 3.443413] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 3.443454] ACPI: Power Button [PWRF]
[ 3.494009] [drm] Initialized drm 1.1.0 20060810
[ 3.494624] ACPI: bus type USB registered
[ 3.494681] usbcore: registered new interface driver usbfs
[ 3.494709] usbcore: registered new interface driver hub
[ 3.494734] usbcore: registered new device driver usb
[ 3.496057] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.496073] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 3.497548] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 3.497577] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 3.497876] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.497884] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.497885] usb usb1: Product: xHCI Host Controller
[ 3.497886] usb usb1: Manufacturer: Linux 4.7.0-rc1+ xhci-hcd
[ 3.497887] usb usb1: SerialNumber: 0000:00:14.0
[ 3.498136] hub 1-0:1.0: USB hub found
[ 3.498211] hub 1-0:1.0: 12 ports detected
[ 3.518208] rtsx_pci 0000:3b:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 124
[ 3.520256] nvme nvme0: pci function 0000:3c:00.0
[ 3.532479] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.532485] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 3.532739] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.532741] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.532743] usb usb2: Product: xHCI Host Controller
[ 3.532745] usb usb2: Manufacturer: Linux 4.7.0-rc1+ xhci-hcd
[ 3.532746] usb usb2: SerialNumber: 0000:00:14.0
[ 3.532970] hub 2-0:1.0: USB hub found
[ 3.533008] hub 2-0:1.0: 6 ports detected
[ 3.538242] usb: port power management may be unreliable
[ 3.613657] [drm] Memory usable by graphics device = 4096M
[ 3.613661] checking generic (90000000 15f9000) vs hw (90000000 10000000)
[ 3.613662] fb: switching to inteldrmfb from EFI VGA
[ 3.613692] Console: switching to colour dummy device 80x25
[ 3.613787] [drm] Replacing VGA console driver
[ 3.619481] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.619485] [drm] Driver supports precise vblank timestamp query.
[ 3.629464] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.632867] [drm] Finished loading i915/skl_dmc_ver1.bin (v1.26)
[ 3.644364] nvme0n1: p1 p2 p3 p4
[ 3.645446] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.647997] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 3.648743] [drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0
[ 3.729362] raid6: sse2x1 gen() 6580 MB/s
[ 3.797329] raid6: sse2x1 xor() 4087 MB/s
[ 3.865349] raid6: sse2x2 gen() 8293 MB/s
[ 3.913450] fbcon: inteldrmfb (fb0) is primary device
[ 3.933312] raid6: sse2x2 xor() 6051 MB/s
[ 3.965329] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 4.001342] raid6: sse2x4 gen() 9754 MB/s
[ 4.069350] raid6: sse2x4 xor() 7007 MB/s
[ 4.069351] clocksource: Switched to clocksource tsc
[ 4.098414] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2a
[ 4.098415] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.137257] raid6: avx2x1 gen() 12003 MB/s
[ 4.205258] raid6: avx2x2 gen() 15599 MB/s
[ 4.213263] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[ 4.273266] raid6: avx2x4 gen() 22635 MB/s
[ 4.273267] raid6: using algorithm avx2x4 gen() 22635 MB/s
[ 4.273267] raid6: using avx2x2 recovery algorithm
[ 4.273429] xor: automatically using best checksumming function:
[ 4.313260] avx : 23170.000 MB/sec
[ 4.398808] usb 1-4: New USB device found, idVendor=04f3, idProduct=20d0
[ 4.398809] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ 4.398810] usb 1-4: Product: Touchscreen
[ 4.398810] usb 1-4: Manufacturer: ELAN
[ 4.405128] usbcore: registered new interface driver usbhid
[ 4.405128] usbhid: USB HID core driver
[ 4.541340] Btrfs loaded, assert=on
[ 4.541609] BTRFS: device fsid 994363fd-c12c-4c6c-92e9-85e8ac695cf9 devid 1 transid 239305 /dev/nvme0n1p3
[ 4.565304] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[ 4.789852] usb 1-5: New USB device found, idVendor=0bda, idProduct=5682
[ 4.789853] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 4.789854] usb 1-5: Product: Integrated_Webcam_HD
[ 4.789855] usb 1-5: Manufacturer: CKFEH41I373010052032
[ 4.789855] usb 1-5: SerialNumber: 200901010001
[ 4.857549] [drm] RC6 on
[ 5.709440] Console: switching to colour frame buffer device 400x112
[ 5.719099] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 5.762345] PM: Starting manual resume from disk
[ 5.762349] PM: Hibernation image partition 259:2 present
[ 5.762350] PM: Looking for hibernation image.
[ 5.762559] PM: Image not found (code -22)
[ 5.762561] PM: Hibernation image not present or could not be loaded.
[ 5.774266] BTRFS info (device nvme0n1p3): disk space caching is enabled
[ 5.774269] BTRFS info (device nvme0n1p3): has skinny extents
[ 5.784851] BTRFS info (device nvme0n1p3): detected SSD devices, enabling SSD mode
[ 6.028042] systemd-journald[140]: Received SIGTERM from PID 1 (systemd).
[ 6.211204] BTRFS info (device nvme0n1p3): disk space caching is enabled
[ 6.219352] random: nonblocking pool is initialized
[ 6.257883] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 6.260411] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 6.280386] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 6.288792] acpi INT33D5:00: intel-hid: created platform device
[ 6.288921] input: Intel HID events as /devices/platform/INT33D5:00/input/input8
[ 6.300684] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 6.300997] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 6.315932] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 6.326273] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.326283] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.326290] ACPI Error: Method parse/execution failed [\_TZ.FN00._ON] (Node ffff88027ed78f28), AE_NOT_FOUND (20160422/psparse-542)
[ 6.326300] acpi PNP0C0B:00: Failed to change power state to D0
[ 6.326850] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 6.332304] ACPI: Battery Slot [BAT0] (battery present)
[ 6.334145] thermal LNXTHERM:00: registered as thermal_zone4
[ 6.334148] ACPI: Thermal Zone [THM] (25 C)
[ 6.335114] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.335126] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.335133] ACPI Error: Method parse/execution failed [\_TZ.FN00._ON] (Node ffff88027ed78f28), AE_NOT_FOUND (20160422/psparse-542)
[ 6.335144] acpi PNP0C0B:00: Failed to set initial power state
[ 6.335202] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.CHRG] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.335209] ACPI Error: Method parse/execution failed [\PNOT] (Node ffff88027edee758), AE_NOT_FOUND (20160422/psparse-542)
[ 6.335214] ACPI Error: Method parse/execution failed [\_SB.AC._PSR] (Node ffff88027ed41528), AE_NOT_FOUND (20160422/psparse-542)
[ 6.335222] ACPI Exception: AE_NOT_FOUND, Error reading AC Adapter state (20160422/ac-128)
[ 6.335560] wmi: Mapper loaded
[ 6.339542] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.339551] ACPI Error: Method parse/execution failed [\_TZ.TZ00._TMP] (Node ffff88027ed7b6e0), AE_NOT_FOUND (20160422/psparse-542)
[ 6.339780] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.339785] ACPI Error: Method parse/execution failed [\_TZ.TZ00._TMP] (Node ffff88027ed7b6e0), AE_NOT_FOUND (20160422/psparse-542)
[ 6.339883] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.339888] ACPI Error: Method parse/execution failed [\_TZ.TZ01._TMP] (Node ffff88027ed7b618), AE_NOT_FOUND (20160422/psparse-542)
[ 6.339971] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.339976] ACPI Error: Method parse/execution failed [\_TZ.TZ01._TMP] (Node ffff88027ed7b618), AE_NOT_FOUND (20160422/psparse-542)
[ 6.341961] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.342357] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB.PCI0.SBUS.SMBI) (20160422/utaddress-255)
[ 6.342363] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.374285] Bluetooth: Core ver 2.21
[ 6.374318] NET: Registered protocol family 31
[ 6.374320] Bluetooth: HCI device and connection manager initialized
[ 6.374324] Bluetooth: HCI socket layer initialized
[ 6.374326] Bluetooth: L2CAP socket layer initialized
[ 6.374332] Bluetooth: SCO socket layer initialized
[ 6.397815] Bluetooth: HCI UART driver ver 2.3
[ 6.397819] Bluetooth: HCI UART protocol H4 registered
[ 6.397820] Bluetooth: HCI UART protocol BCSP registered
[ 6.397822] Bluetooth: HCI UART protocol LL registered
[ 6.397823] Bluetooth: HCI UART protocol ATH3K registered
[ 6.397824] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 6.397887] Bluetooth: HCI UART protocol Intel registered
[ 6.397905] Bluetooth: HCI UART protocol BCM registered
[ 6.397906] Bluetooth: HCI UART protocol QCA registered
[ 6.405480] AVX2 version of gcm_enc/dec engaged.
[ 6.405484] AES CTR mode by8 optimization enabled
[ 6.412910] Intel(R) Wireless WiFi driver for Linux
[ 6.412913] Copyright(c) 2003- 2015 Intel Corporation
[ 6.412993] iwlwifi 0000:3a:00.0: enabling device (0000 -> 0002)
[ 6.414543] iwlwifi 0000:3a:00.0: Unsupported splx structure
[ 6.421709] iwlwifi 0000:3a:00.0: loaded firmware version 21.302800.0 op_mode iwlmvm
[ 6.433757] acpi PNP0C0B:00: Cannot transition from (unknown) to D3hot
[ 6.441541] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.441549] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.441557] ACPI Error: Method parse/execution failed [\_TZ.FN01._ON] (Node ffff88027ed78de8), AE_NOT_FOUND (20160422/psparse-542)
[ 6.441565] acpi PNP0C0B:01: Failed to change power state to D0
[ 6.449519] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.449528] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.449536] ACPI Error: Method parse/execution failed [\_TZ.FN01._ON] (Node ffff88027ed78de8), AE_NOT_FOUND (20160422/psparse-542)
[ 6.449546] acpi PNP0C0B:01: Failed to set initial power state
[ 6.456203] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 6.457351] int3403 thermal: probe of INT3403:03 failed with error -22
[ 6.462986] iwlwifi 0000:3a:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[ 6.463446] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 6.463844] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 6.465054] iwlwifi 0000:3a:00.0: L1 Enabled - LTR Disabled
[ 6.465252] iwlwifi 0000:3a:00.0: L1 Enabled - LTR Disabled
[ 6.489421] acpi PNP0C0B:01: Cannot transition from (unknown) to D3hot
[ 6.489714] Adding 2096124k swap on /dev/nvme0n1p2. Priority:-1 extents:1 across:2096124k SSFS
[ 6.497577] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.497588] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.497598] ACPI Error: Method parse/execution failed [\_TZ.FN02._ON] (Node ffff88027ed78ca8), AE_NOT_FOUND (20160422/psparse-542)
[ 6.497609] acpi PNP0C0B:02: Failed to change power state to D0
[ 6.505518] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.505542] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.505551] ACPI Error: Method parse/execution failed [\_TZ.FN02._ON] (Node ffff88027ed78ca8), AE_NOT_FOUND (20160422/psparse-542)
[ 6.505561] acpi PNP0C0B:02: Failed to set initial power state
[ 6.525329] acpi PNP0C0B:02: Cannot transition from (unknown) to D3hot
[ 6.529824] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 6.529828] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.529830] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 6.529832] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.529833] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.529835] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 6.529837] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 6.529839] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 6.533547] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.533558] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.533567] ACPI Error: Method parse/execution failed [\_TZ.FN03._ON] (Node ffff88027ed78b68), AE_NOT_FOUND (20160422/psparse-542)
[ 6.533577] acpi PNP0C0B:03: Failed to change power state to D0
[ 6.536935] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 6.543632] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 6.546255] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 6.547377] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 6.547540] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 6.547617] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 6.548016] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 6.548652] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.548661] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.548668] ACPI Error: Method parse/execution failed [\_TZ.FN03._ON] (Node ffff88027ed78b68), AE_NOT_FOUND (20160422/psparse-542)
[ 6.548683] acpi PNP0C0B:03: Failed to set initial power state
[ 6.565354] acpi PNP0C0B:03: Cannot transition from (unknown) to D3hot
[ 6.573311] device-mapper: uevent: version 1.0.3
[ 6.573543] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.573553] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.573562] ACPI Error: Method parse/execution failed [\_TZ.FN04._ON] (Node ffff88027ed78a28), AE_NOT_FOUND (20160422/psparse-542)
[ 6.573573] acpi PNP0C0B:04: Failed to change power state to D0
[ 6.581518] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.581549] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.581556] ACPI Error: Method parse/execution failed [\_TZ.FN04._ON] (Node ffff88027ed78a28), AE_NOT_FOUND (20160422/psparse-542)
[ 6.581566] acpi PNP0C0B:04: Failed to set initial power state
[ 6.589375] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 6.597368] acpi PNP0C0B:04: Cannot transition from (unknown) to D3hot
[ 6.599862] ACPI Warning: \_SB.IETM._ART: Return Package type mismatch at index 0 - found Integer, expected Reference (20160422/nspredef-297)
[ 6.599871] ACPI: Invalid package element [0]: got number, expecting [R]
[ 6.599873] _ART package 0 is invalid, ignored
[ 6.600251] input: PC Speaker as /devices/platform/pcspkr/input/input14
[ 6.688756] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:20D0.0001/input/input15
[ 6.688958] hid-multitouch 0003:04F3:20D0.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[ 6.696909] input: DLL0704:01 06CB:76AE Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-DLL0704:01/0018:06CB:76AE.0002/input/input17
[ 6.697041] hid-multitouch 0018:06CB:76AE.0002: input,hidraw1: I2C HID v1.00 Mouse [DLL0704:01 06CB:76AE] on i2c-DLL0704:01
[ 6.947538] systemd-journald[378]: Received request to flush runtime journal from PID 1
[ 6.949158] audit: type=1305 audit(1464637246.910:2): audit_pid=792 old=0 auid=4294967295 ses=4294967295 res=1
[ 6.984618] systemd-journald[378]: File /var/log/journal/69c54807c3cb473b82a49c7b7e022c37/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 7.406991] Linux video capture interface: v2.00
[ 7.490406] usbcore: registered new interface driver btusb
[ 7.505817] Bluetooth: hci0: read Intel version: 370810011003110e23
[ 7.505821] Bluetooth: hci0: Intel device is already patched. patch num: 23
[ 7.510120] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5682)
[ 7.519169] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input19
[ 7.519255] usbcore: registered new interface driver uvcvideo
[ 7.519257] USB Video Class driver (1.1.1)
[ 7.863528] systemd-journald[378]: Received request to flush runtime journal from PID 1
[ 12.935479] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.935481] Bluetooth: BNEP filters: protocol multicast
[ 12.935485] Bluetooth: BNEP socket layer initialized
[ 12.980072] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 12.997454] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 13.029906] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.029955] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 13.154614] XFS (dm-0): Mounting V5 Filesystem
[ 13.173927] XFS (dm-0): Ending clean mount
[ 13.531564] iwlwifi 0000:3a:00.0: L1 Enabled - LTR Disabled
[ 13.531862] iwlwifi 0000:3a:00.0: L1 Enabled - LTR Disabled
[ 13.596889] iwlwifi 0000:3a:00.0: L1 Enabled - LTR Disabled
[ 13.597186] iwlwifi 0000:3a:00.0: L1 Enabled - LTR Disabled
[ 13.630776] NET: Registered protocol family 17
^ permalink raw reply [flat|nested] 17+ messages in thread
* Skylake graphics regression: projector failure with 4.8-rc3
@ 2016-08-26 13:10 ` James Bottomley
0 siblings, 0 replies; 17+ messages in thread
From: James Bottomley @ 2016-08-26 13:10 UTC (permalink / raw)
To: intel-gfx, dri-devel; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 622 bytes --]
We seem to have an xrandr regression with skylake now. What's
happening is that I can get output on to a projector, but the system is
losing video when I change the xrandr sessions (like going from a -
-above b to a --same-as b). The main screen goes blank, which is
basically a reboot situation. Unfortunately, I can't seem to get the
logs out of systemd to see if there was a dump to dmesg (the system was
definitely responding).
I fell back to 4.6.2 which worked perfectly, so this is definitely some
sort of regression. I'll be able to debug more fully when I get back
home from the Linux Security Summit.
James
[-- Attachment #2: Xorg.0.log --]
[-- Type: text/x-log, Size: 27983 bytes --]
[ 13.504]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[ 13.504] X Protocol Version 11, Revision 0
[ 13.504] Build Operating System: openSUSE SUSE LINUX
[ 13.504] Current Operating System: Linux jarvis 4.7.0-rc1+ #1 SMP PREEMPT Mon May 30 12:29:53 PDT 2016 x86_64
[ 13.504] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-test root=UUID=994363fd-c12c-4c6c-92e9-85e8ac695cf9 ro resume=/dev/nvme0n1p2 splash=silent quiet showopts pcie_aspm=force
[ 13.504] Build Date: 07 March 2016 08:22:28AM
[ 13.504]
[ 13.504] Current version of pixman: 0.32.6
[ 13.504] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.504] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.504] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 30 12:40:53 2016
[ 13.504] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13.504] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13.504] (==) No Layout section. Using the first Screen section.
[ 13.504] (==) No screen section available. Using defaults.
[ 13.504] (**) |-->Screen "Default Screen Section" (0)
[ 13.504] (**) | |-->Monitor "<default monitor>"
[ 13.505] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 13.505] (==) Automatically adding devices
[ 13.505] (==) Automatically enabling devices
[ 13.505] (==) Automatically adding GPU devices
[ 13.509] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[ 13.509] Entry deleted from font path.
[ 13.509] (==) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/ghostscript/,
/usr/share/fonts/cyrillic:unscaled,
/usr/share/fonts/truetype/,
built-ins
[ 13.509] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 13.509] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 13.509] (II) Loader magic: 0x80dd00
[ 13.509] (II) Module ABI versions:
[ 13.509] X.Org ANSI C Emulation: 0.4
[ 13.509] X.Org Video Driver: 19.0
[ 13.509] X.Org XInput driver : 21.0
[ 13.509] X.Org Server Extension : 9.0
[ 13.509] (++) using VT number 7
[ 13.509] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 13.510] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13.925] (--) PCI:*(0:0:2:0) 8086:1916:1028:0704 rev 7, Mem @ 0xdb000000/16777216, 0x90000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 13.925] (II) LoadModule: "glx"
[ 13.926] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 13.930] (II) Module glx: vendor="X.Org Foundation"
[ 13.930] compiled for 1.17.2, module version = 1.0.0
[ 13.931] ABI class: X.Org Server Extension, version 9.0
[ 13.931] (==) AIGLX enabled
[ 13.931] (==) Matched intel as autoconfigured driver 0
[ 13.931] (==) Matched intel as autoconfigured driver 1
[ 13.931] (==) Matched modesetting as autoconfigured driver 2
[ 13.931] (==) Matched fbdev as autoconfigured driver 3
[ 13.931] (==) Matched vesa as autoconfigured driver 4
[ 13.931] (==) Assigned the driver to the xf86ConfigLayout
[ 13.931] (II) LoadModule: "intel"
[ 13.931] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 13.932] (II) Module intel: vendor="X.Org Foundation"
[ 13.932] compiled for 1.17.2, module version = 2.99.917
[ 13.932] Module class: X.Org Video Driver
[ 13.932] ABI class: X.Org Video Driver, version 19.0
[ 13.932] (II) LoadModule: "modesetting"
[ 13.932] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 13.932] (II) Module modesetting: vendor="X.Org Foundation"
[ 13.932] compiled for 1.17.2, module version = 1.17.2
[ 13.932] Module class: X.Org Video Driver
[ 13.932] ABI class: X.Org Video Driver, version 19.0
[ 13.932] (II) LoadModule: "fbdev"
[ 13.933] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 13.933] (II) Module fbdev: vendor="X.Org Foundation"
[ 13.933] compiled for 1.17.2, module version = 0.4.4
[ 13.933] Module class: X.Org Video Driver
[ 13.933] ABI class: X.Org Video Driver, version 19.0
[ 13.933] (II) LoadModule: "vesa"
[ 13.933] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 13.933] (II) Module vesa: vendor="X.Org Foundation"
[ 13.933] compiled for 1.17.2, module version = 2.3.4
[ 13.933] Module class: X.Org Video Driver
[ 13.933] ABI class: X.Org Video Driver, version 19.0
[ 13.933] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 13.934] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 13.934] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 13.934] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 13.934] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 13.934] (II) FBDEV: driver for framebuffer: fbdev
[ 13.934] (II) VESA: driver for VESA chipsets: vesa
[ 13.934] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160425
[ 13.935] (WW) Falling back to old probe method for modesetting
[ 13.935] (WW) Falling back to old probe method for fbdev
[ 13.935] (II) Loading sub module "fbdevhw"
[ 13.935] (II) LoadModule: "fbdevhw"
[ 13.935] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 13.935] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 13.935] compiled for 1.17.2, module version = 0.0.2
[ 13.935] ABI class: X.Org Video Driver, version 19.0
[ 13.935] (WW) Falling back to old probe method for vesa
[ 13.936] (--) intel(0): gen9 engineering sample
[ 13.936] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[ 13.936] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 13.936] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 13.936] (==) intel(0): RGB weight 888
[ 13.936] (==) intel(0): Default visual is TrueColor
[ 13.937] (II) intel(0): Output eDP1 has no monitor section
[ 13.952] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 13.952] (II) intel(0): Enabled output eDP1
[ 13.952] (II) intel(0): Output DP1 has no monitor section
[ 13.952] (II) intel(0): Enabled output DP1
[ 13.952] (II) intel(0): Output HDMI1 has no monitor section
[ 13.952] (II) intel(0): Enabled output HDMI1
[ 13.952] (II) intel(0): Output DP2 has no monitor section
[ 13.952] (II) intel(0): Enabled output DP2
[ 13.952] (II) intel(0): Output HDMI2 has no monitor section
[ 13.952] (II) intel(0): Enabled output HDMI2
[ 13.952] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 13.953] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 13.953] (II) intel(0): Enabled output VIRTUAL1
[ 13.953] (--) intel(0): Output eDP1 using initial mode 3200x1800 on pipe 0
[ 13.953] (==) intel(0): TearFree disabled
[ 13.953] (==) intel(0): DPI set to (96, 96)
[ 13.953] (II) Loading sub module "dri2"
[ 13.953] (II) LoadModule: "dri2"
[ 13.953] (II) Module "dri2" already built-in
[ 13.953] (II) Loading sub module "present"
[ 13.953] (II) LoadModule: "present"
[ 13.953] (II) Module "present" already built-in
[ 13.953] (II) UnloadModule: "modesetting"
[ 13.953] (II) Unloading modesetting
[ 13.953] (II) UnloadModule: "fbdev"
[ 13.953] (II) Unloading fbdev
[ 13.953] (II) UnloadSubModule: "fbdevhw"
[ 13.953] (II) Unloading fbdevhw
[ 13.953] (II) UnloadModule: "vesa"
[ 13.953] (II) Unloading vesa
[ 13.953] (==) Depth 24 pixmap format is 32 bpp
[ 13.954] (II) intel(0): SNA initialized with generic backend
[ 13.954] (==) intel(0): Backing store enabled
[ 13.954] (==) intel(0): Silken mouse enabled
[ 13.954] (II) intel(0): HW Cursor enabled
[ 13.954] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 13.954] (==) intel(0): DPMS enabled
[ 13.954] (==) intel(0): display hotplug detection enabled
[ 13.954] (II) intel(0): Textured video not supported on this hardware
[ 13.954] (II) intel(0): [DRI2] Setup complete
[ 13.954] (II) intel(0): [DRI2] DRI driver: i965
[ 13.954] (II) intel(0): [DRI2] VDPAU driver: i965
[ 13.954] (II) intel(0): direct rendering: DRI2 enabled
[ 13.954] (II) intel(0): hardware support for Present enabled
[ 13.954] (--) RandR disabled
[ 13.988] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 13.988] (II) AIGLX: enabled GLX_ARB_create_context
[ 13.988] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 13.988] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 13.988] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 13.988] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 13.988] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 13.988] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 13.988] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 13.988] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 13.988] (II) AIGLX: Loaded and initialized i965
[ 13.988] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 14.001] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 14.014] (II) intel(0): Setting screen physical size to 846 x 476
[ 14.077] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 14.077] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.077] (**) Power Button: Applying InputClass "system-keyboard"
[ 14.077] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.077] (II) LoadModule: "evdev"
[ 14.077] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 14.078] (II) Module evdev: vendor="X.Org Foundation"
[ 14.078] compiled for 1.17.2, module version = 2.9.2
[ 14.078] Module class: X.Org XInput Driver
[ 14.078] ABI class: X.Org XInput driver, version 21.0
[ 14.078] (II) Using input driver 'evdev' for 'Power Button'
[ 14.078] (**) Power Button: always reports core events
[ 14.078] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 14.078] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.078] (--) evdev: Power Button: Found keys
[ 14.078] (II) evdev: Power Button: Configuring as keyboard
[ 14.078] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[ 14.078] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 14.078] (**) Option "xkb_rules" "evdev"
[ 14.078] (**) Option "xkb_model" "pc104"
[ 14.078] (**) Option "xkb_layout" "us"
[ 14.093] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 14.093] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 14.093] (**) Video Bus: Applying InputClass "system-keyboard"
[ 14.093] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 14.093] (II) Using input driver 'evdev' for 'Video Bus'
[ 14.093] (**) Video Bus: always reports core events
[ 14.093] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 14.093] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 14.093] (--) evdev: Video Bus: Found keys
[ 14.093] (II) evdev: Video Bus: Configuring as keyboard
[ 14.093] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event6"
[ 14.093] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 14.093] (**) Option "xkb_rules" "evdev"
[ 14.093] (**) Option "xkb_model" "pc104"
[ 14.093] (**) Option "xkb_layout" "us"
[ 14.093] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 14.093] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.093] (**) Power Button: Applying InputClass "system-keyboard"
[ 14.093] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.093] (II) Using input driver 'evdev' for 'Power Button'
[ 14.093] (**) Power Button: always reports core events
[ 14.093] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 14.093] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.093] (--) evdev: Power Button: Found keys
[ 14.093] (II) evdev: Power Button: Configuring as keyboard
[ 14.093] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[ 14.093] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 14.093] (**) Option "xkb_rules" "evdev"
[ 14.093] (**) Option "xkb_model" "pc104"
[ 14.093] (**) Option "xkb_layout" "us"
[ 14.094] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 14.094] (II) No input driver specified, ignoring this device.
[ 14.094] (II) This device may have been added with another device file.
[ 14.094] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 14.094] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 14.094] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 14.094] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 14.094] (II) Using input driver 'evdev' for 'Sleep Button'
[ 14.094] (**) Sleep Button: always reports core events
[ 14.094] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 14.094] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 14.094] (--) evdev: Sleep Button: Found keys
[ 14.094] (II) evdev: Sleep Button: Configuring as keyboard
[ 14.094] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event4"
[ 14.094] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 14.094] (**) Option "xkb_rules" "evdev"
[ 14.094] (**) Option "xkb_model" "pc104"
[ 14.094] (**) Option "xkb_layout" "us"
[ 14.094] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event14)
[ 14.094] (**) ELAN Touchscreen: Applying InputClass "evdev touchscreen catchall"
[ 14.094] (**) ELAN Touchscreen: Applying InputClass "evdev touchscreen catchall"
[ 14.094] (II) Using input driver 'evdev' for 'ELAN Touchscreen'
[ 14.094] (**) ELAN Touchscreen: always reports core events
[ 14.094] (**) evdev: ELAN Touchscreen: Device: "/dev/input/event14"
[ 14.094] (--) evdev: ELAN Touchscreen: Vendor 0x4f3 Product 0x20d0
[ 14.094] (--) evdev: ELAN Touchscreen: Found absolute axes
[ 14.094] (--) evdev: ELAN Touchscreen: Found absolute multitouch axes
[ 14.094] (II) evdev: ELAN Touchscreen: No buttons found, faking one.
[ 14.094] (--) evdev: ELAN Touchscreen: Found x and y absolute axes
[ 14.094] (--) evdev: ELAN Touchscreen: Found absolute touchscreen
[ 14.094] (II) evdev: ELAN Touchscreen: Configuring as touchscreen
[ 14.094] (**) evdev: ELAN Touchscreen: YAxisMapping: buttons 4 and 5
[ 14.094] (**) evdev: ELAN Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.094] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:20D0.0001/input/input15/event14"
[ 14.094] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TOUCHSCREEN, id 10)
[ 14.095] (II) evdev: ELAN Touchscreen: initialized for absolute axes.
[ 14.095] (**) ELAN Touchscreen: (accel) keeping acceleration scheme 1
[ 14.095] (**) ELAN Touchscreen: (accel) acceleration profile 0
[ 14.095] (**) ELAN Touchscreen: (accel) acceleration factor: 2.000
[ 14.095] (**) ELAN Touchscreen: (accel) acceleration threshold: 4
[ 14.095] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse1)
[ 14.095] (II) No input driver specified, ignoring this device.
[ 14.095] (II) This device may have been added with another device file.
[ 14.095] (II) config/udev: Adding input device Integrated_Webcam_HD (/dev/input/event16)
[ 14.095] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[ 14.095] (**) Integrated_Webcam_HD: Applying InputClass "system-keyboard"
[ 14.095] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[ 14.095] (II) Using input driver 'evdev' for 'Integrated_Webcam_HD'
[ 14.095] (**) Integrated_Webcam_HD: always reports core events
[ 14.095] (**) evdev: Integrated_Webcam_HD: Device: "/dev/input/event16"
[ 14.095] (--) evdev: Integrated_Webcam_HD: Vendor 0xbda Product 0x5682
[ 14.095] (--) evdev: Integrated_Webcam_HD: Found keys
[ 14.095] (II) evdev: Integrated_Webcam_HD: Configuring as keyboard
[ 14.095] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input19/event16"
[ 14.095] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD" (type: KEYBOARD, id 11)
[ 14.095] (**) Option "xkb_rules" "evdev"
[ 14.095] (**) Option "xkb_model" "pc104"
[ 14.095] (**) Option "xkb_layout" "us"
[ 14.095] (II) config/udev: Adding input device DLL0704:01 06CB:76AE Touchpad (/dev/input/event15)
[ 14.095] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "evdev touchpad catchall"
[ 14.095] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "evdev touchpad catchall"
[ 14.095] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "touchpad catchall"
[ 14.095] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "Default clickpad buttons"
[ 14.096] (II) LoadModule: "synaptics"
[ 14.096] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 14.096] (II) Module synaptics: vendor="X.Org Foundation"
[ 14.096] compiled for 1.17.2, module version = 1.8.2
[ 14.096] Module class: X.Org XInput Driver
[ 14.096] ABI class: X.Org XInput driver, version 21.0
[ 14.096] (II) Using input driver 'synaptics' for 'DLL0704:01 06CB:76AE Touchpad'
[ 14.096] (**) DLL0704:01 06CB:76AE Touchpad: always reports core events
[ 14.096] (**) Option "Device" "/dev/input/event15"
[ 14.252] (II) synaptics: DLL0704:01 06CB:76AE Touchpad: found clickpad property
[ 14.252] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: x-axis range 0 - 1216 (res 12)
[ 14.252] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: y-axis range 0 - 680 (res 12)
[ 14.252] (II) synaptics: DLL0704:01 06CB:76AE Touchpad: device does not report pressure, will use touch data.
[ 14.253] (II) synaptics: DLL0704:01 06CB:76AE Touchpad: device does not report finger width.
[ 14.253] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: buttons: left double triple
[ 14.253] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: Vendor 0x6cb Product 0x76ae
[ 14.253] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: invalid pressure range. defaulting to 0 - 255
[ 14.253] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: invalid finger width range. defaulting to 0 - 15
[ 14.253] (**) Option "HorizEdgeScroll" "off"
[ 14.253] (**) Option "TapButton1" "1"
[ 14.253] (**) Option "TapButton2" "3"
[ 14.253] (**) Option "TapButton3" "2"
[ 14.253] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 14.253] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: touchpad found
[ 14.253] (**) DLL0704:01 06CB:76AE Touchpad: always reports core events
[ 14.292] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-DLL0704:01/0018:06CB:76AE.0002/input/input17/event15"
[ 14.292] (II) XINPUT: Adding extended input device "DLL0704:01 06CB:76AE Touchpad" (type: TOUCHPAD, id 12)
[ 14.292] (**) synaptics: DLL0704:01 06CB:76AE Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 14.292] (**) synaptics: DLL0704:01 06CB:76AE Touchpad: (accel) MaxSpeed is now 1.75
[ 14.292] (**) synaptics: DLL0704:01 06CB:76AE Touchpad: (accel) AccelFactor is now 0.144
[ 14.292] (**) DLL0704:01 06CB:76AE Touchpad: (accel) keeping acceleration scheme 1
[ 14.292] (**) DLL0704:01 06CB:76AE Touchpad: (accel) acceleration profile 1
[ 14.292] (**) DLL0704:01 06CB:76AE Touchpad: (accel) acceleration factor: 2.000
[ 14.292] (**) DLL0704:01 06CB:76AE Touchpad: (accel) acceleration threshold: 4
[ 14.293] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: touchpad found
[ 14.293] (II) config/udev: Adding input device DLL0704:01 06CB:76AE Touchpad (/dev/input/mouse2)
[ 14.293] (**) DLL0704:01 06CB:76AE Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 14.294] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event9)
[ 14.294] (II) No input driver specified, ignoring this device.
[ 14.294] (II) This device may have been added with another device file.
[ 14.295] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 14.295] (II) No input driver specified, ignoring this device.
[ 14.295] (II) This device may have been added with another device file.
[ 14.295] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event11)
[ 14.295] (II) No input driver specified, ignoring this device.
[ 14.295] (II) This device may have been added with another device file.
[ 14.296] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event12)
[ 14.296] (II) No input driver specified, ignoring this device.
[ 14.296] (II) This device may have been added with another device file.
[ 14.297] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 14.297] (II) No input driver specified, ignoring this device.
[ 14.297] (II) This device may have been added with another device file.
[ 14.297] (II) config/udev: Adding input device Intel HID events (/dev/input/event7)
[ 14.297] (**) Intel HID events: Applying InputClass "evdev keyboard catchall"
[ 14.298] (**) Intel HID events: Applying InputClass "system-keyboard"
[ 14.298] (**) Intel HID events: Applying InputClass "evdev keyboard catchall"
[ 14.298] (II) Using input driver 'evdev' for 'Intel HID events'
[ 14.298] (**) Intel HID events: always reports core events
[ 14.298] (**) evdev: Intel HID events: Device: "/dev/input/event7"
[ 14.298] (--) evdev: Intel HID events: Vendor 0 Product 0
[ 14.298] (--) evdev: Intel HID events: Found keys
[ 14.298] (II) evdev: Intel HID events: Configuring as keyboard
[ 14.298] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input8/event7"
[ 14.298] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 13)
[ 14.298] (**) Option "xkb_rules" "evdev"
[ 14.298] (**) Option "xkb_model" "pc104"
[ 14.298] (**) Option "xkb_layout" "us"
[ 14.299] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 14.299] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.299] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 14.299] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.299] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 14.299] (**) AT Translated Set 2 keyboard: always reports core events
[ 14.299] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 14.300] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 14.302] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 14.302] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 14.303] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 14.303] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 14.303] (**) Option "xkb_rules" "evdev"
[ 14.303] (**) Option "xkb_model" "pc104"
[ 14.303] (**) Option "xkb_layout" "us"
[ 14.304] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[ 14.304] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 14.304] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 14.304] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 14.304] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 14.304] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 14.304] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 14.304] (**) Option "Device" "/dev/input/event1"
[ 14.368] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 14.368] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1276 - 5666 (res 0)
[ 14.368] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1118 - 4734 (res 0)
[ 14.368] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 14.368] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 14.368] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 14.368] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 14.368] (**) Option "HorizEdgeScroll" "off"
[ 14.368] (**) Option "TapButton1" "1"
[ 14.368] (**) Option "TapButton2" "3"
[ 14.368] (**) Option "TapButton3" "2"
[ 14.368] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 14.368] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 14.368] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 14.400] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[ 14.400] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[ 14.400] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 14.400] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 14.400] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[ 14.400] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 14.400] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 14.400] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 14.400] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 14.400] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 14.401] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 14.401] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 14.401] (II) config/udev: Adding input device PC Speaker (/dev/input/event13)
[ 14.401] (II) No input driver specified, ignoring this device.
[ 14.401] (II) This device may have been added with another device file.
[ 30.805] (II) intel(0): EDID vendor "SHP", prod id 5194
[ 30.806] (II) intel(0): Printing DDC gathered Modelines:
[ 30.806] (II) intel(0): Modeline "3200x1800"x0.0 373.25 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (111.1 kHz eP)
[ 30.806] (II) intel(0): Modeline "3200x1800"x0.0 298.60 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (88.9 kHz e)
[-- Attachment #3: Type: text/plain, Size: 68292 bytes --]
[ 0.000000] Linux version 4.7.0-rc1+ (jejb@jarvis) (gcc version 4.8.5 (SUSE Linux) ) #1 SMP PREEMPT Mon May 30 12:29:53 PDT 2016
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-test root=UUID=994363fd-c12c-4c6c-92e9-85e8ac695cf9 ro resume=/dev/nvme0n1p2 splash=silent quiet showopts pcie_aspm=force
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000069537fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000069538000-0x0000000069538fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000069539000-0x0000000069562fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000069563000-0x00000000695bdfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000695be000-0x0000000069daefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000069daf000-0x000000007907dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007907e000-0x00000000793f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000793f9000-0x0000000079448fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000079449000-0x0000000079c00fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000079c01000-0x000000007a4fefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007a4ff000-0x000000007a4fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007a500000-0x000000007a5fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x67823018-0x67833057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000000fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000001000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009cfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000067823017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000067823018-0x0000000067833057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000067833058-0x0000000069537fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000069538000-0x0000000069538fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000069539000-0x0000000069562fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000069563000-0x00000000695bdfff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000695be000-0x0000000069daefff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000069daf000-0x000000007907dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007907e000-0x00000000793f8fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000793f9000-0x0000000079448fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x0000000079449000-0x0000000079c00fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000079c01000-0x000000007a4fefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007a4ff000-0x000000007a4fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007a500000-0x000000007a5fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000027effffff] usable
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ACPI=0x7941a000 ACPI 2.0=0x7941a000 SMBIOS=0xf0000
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Dell Inc. XPS 13 9350/07TYC2, BIOS 1.3.3 03/01/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x27f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable
[ 0.000000] 2 base 007B800000 mask 7FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x7a500 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x0205d000, 0x0205dfff] PGTABLE
[ 0.000000] BRK [0x0205e000, 0x0205efff] PGTABLE
[ 0.000000] BRK [0x0205f000, 0x0205ffff] PGTABLE
[ 0.000000] BRK [0x02060000, 0x02060fff] PGTABLE
[ 0.000000] BRK [0x02061000, 0x02061fff] PGTABLE
[ 0.000000] BRK [0x02062000, 0x02062fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x2f71f000-0x2ff92fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000007941A000 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x000000007941A0B8 0000EC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007943A840 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000007941A230 02060D (v02 DELL CBX3 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x0000000079C00F80 000040
[ 0.000000] ACPI: APIC 0x000000007943A950 000084 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000007943A9D8 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x000000007943AA20 00009C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000007943AAC0 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000007943AB00 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
[ 0.000000] ACPI: SSDT 0x000000007943AB38 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: LPIT 0x000000007943AE50 000094 (v01 INTEL SKL-ULT 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000007943AEE8 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000007943B130 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000007943DCE0 000BE3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
[ 0.000000] ACPI: DBGP 0x000000007943E8C8 000034 (v01 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x000000007943E900 000054 (v00 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000007943E958 000737 (v02 INTEL xh_rvp07 00000000 INTL 20120913)
[ 0.000000] ACPI: BOOT 0x000000007943F090 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000007943F0B8 0035AE (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x0000000079442668 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x00000000794426B0 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: MSDM 0x0000000079443528 000055 (v03 DELL CBX3 06222004 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x0000000079443580 003AE3 (v02 DptfTa DptfTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SLIC 0x0000000079447068 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.000000] ACPI: TCPA 0x00000000794471E0 000032 (v02 ALASKA NAPAASF 00000001 MSFT 01000013)
[ 0.000000] ACPI: BGRT 0x0000000079447218 000038 (v00 ?\xffffffcdq{ 01072009 AMI 00010013)
[ 0.000000] ACPI: DMAR 0x0000000079447250 0000F0 (v01 INTEL SKL 00000001 INTL 00000001)
[ 0.000000] ACPI: ASF! 0x0000000079447340 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x27efeb000-0x27effcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000027effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000069537fff]
[ 0.000000] node 0: [mem 0x0000000069563000-0x00000000695bdfff]
[ 0.000000] node 0: [mem 0x0000000069daf000-0x000000007907dfff]
[ 0.000000] node 0: [mem 0x000000007a4ff000-0x000000007a4fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000027effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027effffff]
[ 0.000000] On node 0 totalpages: 2062334
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7650 pages used for memmap
[ 0.000000] DMA32 zone: 489571 pages, LIFO batch:31
[ 0.000000] Normal zone: 24512 pages used for memmap
[ 0.000000] Normal zone: 1568768 pages, LIFO batch:31
[ 0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED
[ 0.000000] Reserving Intel graphics stolen memory at 0x7c000000-0x7fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x67823000-0x67823fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x67833000-0x67833fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x69538000-0x69538fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x69539000-0x69562fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x695be000-0x69daefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7907e000-0x793f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x793f9000-0x79448fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79449000-0x79c00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79c01000-0x7a4fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a500000-0x7a5fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a600000-0x7bffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7c000000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff88027ec00000 s104024 r8192 d31144 u524288
[ 0.000000] pcpu-alloc: s104024 r8192 d31144 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2030087
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-test root=UUID=994363fd-c12c-4c6c-92e9-85e8ac695cf9 ro resume=/dev/nvme0n1p2 splash=silent quiet showopts pcie_aspm=force
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 3706140K/8249336K available (6701K kernel code, 1127K rwdata, 3016K rodata, 1656K init, 1648K bss, 497728K reserved, 0K cma-reserved)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:1024 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 2399.949 MHz processor
[ 0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.89 BogoMIPS (lpj=9599796)
[ 0.000030] pid_max: default: 32768 minimum: 301
[ 0.000039] ACPI: Core revision 20160422
[ 0.000922] Security Framework initialized
[ 0.000928] AppArmor: AppArmor initialized
[ 0.001447] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002952] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003608] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.003616] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.003848] CPU: Physical Processor ID: 0
[ 0.003849] CPU: Processor Core ID: 0
[ 0.003853] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.003854] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.003858] mce: CPU supports 8 MCE banks
[ 0.003867] CPU0: Thermal monitoring enabled (TM1)
[ 0.003890] process: using mwait in idle threads
[ 0.003892] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.003893] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.004255] Freeing SMP alternatives memory: 24K (ffffffff81eb9000 - ffffffff81ebf000)
[ 0.016195] ftrace: allocating 26970 entries in 106 pages
[ 0.027589] smpboot: Max logical packages: 2
[ 0.027591] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.027596] DMAR: Host address width 39
[ 0.027597] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.027604] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[ 0.027606] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.027610] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.027612] DMAR: RMRR base: 0x0000007918b000 end: 0x000000791aafff
[ 0.027613] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
[ 0.027614] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.027615] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.027617] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.027618] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.027619] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.027620] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.027810] DMAR: DRHD: handling fault status reg 2
[ 0.027815] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 6824 [fault reason 37] Blocked a compatibility format interrupt request
[ 0.029049] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.029050] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.033157] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072848] TSC deadline timer enabled
[ 0.072853] smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3)
[ 0.072857] Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver.
[ 0.072886] ... version: 4
[ 0.072887] ... bit width: 48
[ 0.072888] ... generic registers: 4
[ 0.072888] ... value mask: 0000ffffffffffff
[ 0.072889] ... max period: 0000ffffffffffff
[ 0.072890] ... fixed-purpose events: 3
[ 0.072891] ... event mask: 000000070000000f
[ 0.097018] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.117030] x86: Booting SMP configuration:
[ 0.117031] .... node #0, CPUs: #1 #2 #3
[ 0.391196] x86: Booted up 1 node, 4 CPUs
[ 0.391200] smpboot: Total of 4 processors activated (19202.81 BogoMIPS)
[ 0.410714] node 0 initialised, 1011367 pages in 12ms
[ 0.419179] devtmpfs: initialized
[ 0.419243] x86/mm: Memory block size: 128MB
[ 0.427205] PM: Registering ACPI NVS region [mem 0x69538000-0x69538fff] (4096 bytes)
[ 0.427207] PM: Registering ACPI NVS region [mem 0x79449000-0x79c00fff] (8093696 bytes)
[ 0.427409] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.439085] pinctrl core: initialized pinctrl subsystem
[ 0.439204] RTC time: 19:40:40, date: 05/30/16
[ 0.451932] NET: Registered protocol family 16
[ 0.463116] cpuidle: using governor ladder
[ 0.475135] cpuidle: using governor menu
[ 0.475184] Simple Boot Flag at 0x47 set to 0x80
[ 0.475214] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.475217] ACPI: bus type PCI registered
[ 0.475219] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.495271] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.495273] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.495280] PCI: Using configuration type 1 for base access
[ 0.495285] dmi type 0xB1 record - unknown flag
[ 0.519287] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.519288] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.539282] ACPI: Added _OSI(Module Device)
[ 0.539283] ACPI: Added _OSI(Processor Device)
[ 0.539284] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.539286] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.567786] ACPI: Executed 21 blocks of module-level executable AML code
[ 0.579489] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.583484] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.599042] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.706018] ACPI: Dynamic OEM Table Load:
[ 0.706025] ACPI: SSDT 0xFFFF88027EBDA800 00061E (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.707109] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.708603] ACPI: Dynamic OEM Table Load:
[ 0.708609] ACPI: SSDT 0xFFFF88027EC37000 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.710463] ACPI: Dynamic OEM Table Load:
[ 0.710468] ACPI: SSDT 0xFFFF88027EBDA000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.711960] ACPI: Dynamic OEM Table Load:
[ 0.711965] ACPI: SSDT 0xFFFF88027ED46E00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.715042] ACPI: Interpreter enabled
[ 0.715076] ACPI: (supports S0 S3 S4 S5)
[ 0.715077] ACPI: Using IOAPIC for interrupt routing
[ 0.715115] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.717346] ACPI: Power Resource [PG00] (on)
[ 0.717781] ACPI: Power Resource [PG01] (on)
[ 0.718200] ACPI: Power Resource [PG02] (on)
[ 0.720297] ACPI: Power Resource [WRST] (off)
[ 0.720722] ACPI: Power Resource [WRST] (off)
[ 0.721145] ACPI: Power Resource [WRST] (off)
[ 0.721566] ACPI: Power Resource [WRST] (off)
[ 0.721994] ACPI: Power Resource [WRST] (off)
[ 0.722416] ACPI: Power Resource [WRST] (off)
[ 0.722837] ACPI: Power Resource [WRST] (off)
[ 0.723258] ACPI: Power Resource [WRST] (off)
[ 0.723679] ACPI: Power Resource [WRST] (off)
[ 0.724128] ACPI: Power Resource [WRST] (off)
[ 0.724556] ACPI: Power Resource [WRST] (off)
[ 0.724975] ACPI: Power Resource [WRST] (off)
[ 0.725397] ACPI: Power Resource [WRST] (off)
[ 0.725822] ACPI: Power Resource [WRST] (off)
[ 0.726244] ACPI: Power Resource [WRST] (off)
[ 0.726665] ACPI: Power Resource [WRST] (off)
[ 0.727085] ACPI: Power Resource [WRST] (off)
[ 0.727508] ACPI: Power Resource [WRST] (off)
[ 0.727927] ACPI: Power Resource [WRST] (off)
[ 0.728350] ACPI: Power Resource [WRST] (off)
[ 0.744692] ACPI: Power Resource [FN00] (off)
[ 0.744822] ACPI: Power Resource [FN01] (off)
[ 0.744948] ACPI: Power Resource [FN02] (off)
[ 0.745074] ACPI: Power Resource [FN03] (off)
[ 0.745199] ACPI: Power Resource [FN04] (off)
[ 0.746565] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.746572] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.746621] \_SB_.PCI0 (33DB4D5B-1FF7-401C-9657-7441C03DD766): _OSC invalid UUID
[ 0.746621] _OSC request data: 1 1f 0
[ 0.746625] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.747356] PCI host bridge to bus 0000:00
[ 0.747359] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.747360] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.747362] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.747363] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.747364] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.747366] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.747367] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.747368] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.747370] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.747371] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.747372] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.747373] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.747375] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.747376] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.747377] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[ 0.747378] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.747380] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.747387] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[ 0.747537] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
[ 0.747546] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
[ 0.747552] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.747557] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.747722] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.747732] pci 0000:00:04.0: reg 0x10: [mem 0xdc320000-0xdc327fff 64bit]
[ 0.747962] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.747982] pci 0000:00:14.0: reg 0x10: [mem 0xdc310000-0xdc31ffff 64bit]
[ 0.748054] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.748191] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.748232] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.748252] pci 0000:00:14.2: reg 0x10: [mem 0xdc338000-0xdc338fff 64bit]
[ 0.748527] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[ 0.748735] pci 0000:00:15.0: reg 0x10: [mem 0xdc337000-0xdc337fff 64bit]
[ 0.749712] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[ 0.749908] pci 0000:00:15.1: reg 0x10: [mem 0xdc336000-0xdc336fff 64bit]
[ 0.750821] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.750840] pci 0000:00:16.0: reg 0x10: [mem 0xdc335000-0xdc335fff 64bit]
[ 0.750909] pci 0000:00:16.0: PME# supported from D3hot
[ 0.751080] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 0.751097] pci 0000:00:17.0: reg 0x10: [mem 0xdc330000-0xdc331fff]
[ 0.751106] pci 0000:00:17.0: reg 0x14: [mem 0xdc334000-0xdc3340ff]
[ 0.751115] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.751124] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.751133] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.751142] pci 0000:00:17.0: reg 0x24: [mem 0xdc333000-0xdc3337ff]
[ 0.751187] pci 0000:00:17.0: PME# supported from D3hot
[ 0.751361] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 0.751434] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.751602] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.751651] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[ 0.751724] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.751889] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.751927] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[ 0.751996] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.752159] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.752203] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[ 0.752269] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.752430] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.752498] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
[ 0.752755] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.752766] pci 0000:00:1f.2: reg 0x10: [mem 0xdc32c000-0xdc32ffff]
[ 0.752959] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040380
[ 0.752981] pci 0000:00:1f.3: reg 0x10: [mem 0xdc328000-0xdc32bfff 64bit]
[ 0.753008] pci 0000:00:1f.3: reg 0x20: [mem 0xdc300000-0xdc30ffff 64bit]
[ 0.753058] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.753247] pci 0000:00:1f.3: System wakeup disabled by ACPI
[ 0.753290] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.753337] pci 0000:00:1f.4: reg 0x10: [mem 0xdc332000-0xdc3320ff 64bit]
[ 0.753409] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.753739] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.753744] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.753749] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.753896] pci 0000:3a:00.0: [8086:095a] type 00 class 0x028000
[ 0.753939] pci 0000:3a:00.0: reg 0x10: [mem 0xdc200000-0xdc201fff 64bit]
[ 0.754121] pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold
[ 0.754254] pci 0000:3a:00.0: System wakeup disabled by ACPI
[ 0.758452] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.758457] pci 0000:00:1c.4: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.758588] pci 0000:3b:00.0: [10ec:525a] type 00 class 0xff0000
[ 0.758616] pci 0000:3b:00.0: reg 0x14: [mem 0xdc100000-0xdc100fff]
[ 0.758729] pci 0000:3b:00.0: supports D1 D2
[ 0.758731] pci 0000:3b:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.758828] pci 0000:3b:00.0: System wakeup disabled by ACPI
[ 0.766450] pci 0000:00:1c.5: PCI bridge to [bus 3b]
[ 0.766455] pci 0000:00:1c.5: bridge window [mem 0xdc100000-0xdc1fffff]
[ 0.766574] pci 0000:3c:00.0: [144d:a802] type 00 class 0x010802
[ 0.766594] pci 0000:3c:00.0: reg 0x10: [mem 0xdc000000-0xdc003fff 64bit]
[ 0.766604] pci 0000:3c:00.0: reg 0x18: [io 0xe000-0xe0ff]
[ 0.766799] pci 0000:3c:00.0: System wakeup disabled by ACPI
[ 0.774466] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[ 0.774469] pci 0000:00:1d.0: bridge window [io 0xe000-0xefff]
[ 0.774472] pci 0000:00:1d.0: bridge window [mem 0xdc000000-0xdc0fffff]
[ 0.776941] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.777016] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.777088] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.777159] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.777230] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.777301] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.777376] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.777448] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.779945] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.781038] ACPI : EC: GPE = 0x14, I/O: command/status = 0x934, data = 0x930
[ 0.781040] ACPI : EC: EC started
[ 0.812407] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.812409] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.812412] vgaarb: loaded
[ 0.812413] vgaarb: bridge control possible 0000:00:02.0
[ 0.822633] SCSI subsystem initialized
[ 0.822668] libata version 3.00 loaded.
[ 0.822762] PCI: Using ACPI for IRQ routing
[ 0.846790] PCI: pci_cache_line_size set to 64 bytes
[ 0.846934] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.846935] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.846936] e820: reserve RAM buffer [mem 0x67823018-0x67ffffff]
[ 0.846938] e820: reserve RAM buffer [mem 0x69538000-0x6bffffff]
[ 0.846939] e820: reserve RAM buffer [mem 0x695be000-0x6bffffff]
[ 0.846940] e820: reserve RAM buffer [mem 0x7907e000-0x7bffffff]
[ 0.846942] e820: reserve RAM buffer [mem 0x7a500000-0x7bffffff]
[ 0.846943] e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff]
[ 0.847030] NetLabel: Initializing
[ 0.847031] NetLabel: domain hash size = 128
[ 0.847032] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.847043] NetLabel: unlabeled traffic allowed by default
[ 0.847135] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.847140] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.849186] clocksource: Switched to clocksource hpet
[ 0.854773] VFS: Disk quotas dquot_6.6.0
[ 0.865242] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.881280] AppArmor: AppArmor Filesystem Enabled
[ 0.881311] pnp: PnP ACPI init
[ 0.881558] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.881560] system 00:00: [io 0xffff] has been reserved
[ 0.881562] system 00:00: [io 0xffff] has been reserved
[ 0.881563] system 00:00: [io 0xffff] has been reserved
[ 0.881565] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.881566] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.881570] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.881666] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.881710] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.881713] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.881817] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.881839] pnp 00:04: Plug and Play ACPI device, IDs DLL0704 PNP0f13 (active)
[ 0.882113] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.882114] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.882116] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.882118] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.882119] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.882121] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.882122] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.882124] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.882126] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.882128] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.882130] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.882178] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.882180] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.882182] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.882183] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.882185] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.882187] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.882189] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.882191] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.882489] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.882491] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.883799] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.883801] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.883803] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.884590] pnp 00:09: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.890429] pnp: PnP ACPI: found 10 devices
[ 0.898990] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.899003] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-39] add_size 1000
[ 0.899024] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.899026] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.899029] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.899032] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.899034] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.899038] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.899041] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.899046] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.899050] pci 0000:00:1c.4: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.899057] pci 0000:00:1c.5: PCI bridge to [bus 3b]
[ 0.899061] pci 0000:00:1c.5: bridge window [mem 0xdc100000-0xdc1fffff]
[ 0.899068] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[ 0.899070] pci 0000:00:1d.0: bridge window [io 0xe000-0xefff]
[ 0.899073] pci 0000:00:1d.0: bridge window [mem 0xdc000000-0xdc0fffff]
[ 0.899080] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.899082] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.899083] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.899085] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.899086] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.899087] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.899088] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.899090] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.899091] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.899092] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.899094] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.899095] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.899096] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.899098] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.899099] pci_bus 0000:00: resource 18 [mem 0x80000000-0xdfffffff window]
[ 0.899100] pci_bus 0000:00: resource 19 [mem 0xfd000000-0xfe7fffff window]
[ 0.899102] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.899103] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff]
[ 0.899104] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.899106] pci_bus 0000:3a: resource 1 [mem 0xdc200000-0xdc2fffff]
[ 0.899107] pci_bus 0000:3b: resource 1 [mem 0xdc100000-0xdc1fffff]
[ 0.899109] pci_bus 0000:3c: resource 0 [io 0xe000-0xefff]
[ 0.899110] pci_bus 0000:3c: resource 1 [mem 0xdc000000-0xdc0fffff]
[ 0.965244] NET: Registered protocol family 2
[ 0.977286] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.977389] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.977490] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.977506] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.977527] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.005246] NET: Registered protocol family 1
[ 1.005259] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.006361] PCI: CLS 0 bytes, default 64
[ 1.006403] Unpacking initramfs...
[ 1.943987] Freeing initrd memory: 8656K (ffff88002f71f000 - ffff88002ff93000)
[ 1.957284] DMAR: ACPI device "device:64" under DMAR at fed91000 as 00:15.0
[ 1.957288] DMAR: ACPI device "device:65" under DMAR at fed91000 as 00:15.1
[ 1.957304] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.957313] software IO TLB [mem 0x63823000-0x67823000] (64MB) mapped at [ffff880063823000-ffff880067822fff]
[ 1.957344] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 1.957345] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 1.957346] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 1.957346] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 1.957347] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 1.957348] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 1.957416] Scanning for low memory corruption every 60 seconds
[ 1.969397] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.981268] audit: initializing netlink subsys (disabled)
[ 1.981281] audit: type=2000 audit(1464637241.940:1): initialized
[ 1.981881] workingset: timestamp_bits=35 max_order=21 bucket_order=0
[ 1.981908] zbud: loaded
[ 2.005278] Key type big_key registered
[ 2.006149] Key type asymmetric registered
[ 2.006151] Asymmetric key parser 'x509' registered
[ 2.025325] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 2.025392] io scheduler noop registered
[ 2.025393] io scheduler deadline registered
[ 2.041310] io scheduler cfq registered (default)
[ 2.041971] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.041975] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.041996] efifb: probing for efifb
[ 2.042009] efifb: framebuffer at 0x90000000, using 22500k, total 22500k
[ 2.042010] efifb: mode is 3200x1800x32, linelength=12800, pages=1
[ 2.042010] efifb: scrolling: redraw
[ 2.042012] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.053091] Console: switching to colour frame buffer device 400x112
[ 2.064037] fb0: EFI VGA frame buffer device
[ 2.064044] intel_idle: MWAIT substates: 0x11142120
[ 2.064045] intel_idle: v0.4.1 model 0x4E
[ 2.064255] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.064378] GHES: HEST is not enabled!
[ 2.064444] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
[ 2.067294] Non-volatile memory driver v1.3
[ 2.067366] Linux agpgart interface v0.103
[ 2.089302] tpm_tis 00:09: 1.2 TPM (device-id 0xFE, rev-id 2)
[ 2.185932] ahci 0000:00:17.0: version 3.0
[ 2.186112] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x0 impl SATA mode
[ 2.186114] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 2.187094] scsi host0: ahci
[ 2.187359] scsi host1: ahci
[ 2.187533] scsi host2: ahci
[ 2.187745] scsi host3: ahci
[ 2.187926] scsi host4: ahci
[ 2.188135] scsi host5: ahci
[ 2.188348] scsi host6: ahci
[ 2.188540] scsi host7: ahci
[ 2.188587] ata1: DUMMY
[ 2.188588] ata2: DUMMY
[ 2.188589] ata3: DUMMY
[ 2.188589] ata4: DUMMY
[ 2.188590] ata5: DUMMY
[ 2.188591] ata6: DUMMY
[ 2.188592] ata7: DUMMY
[ 2.188592] ata8: DUMMY
[ 2.188664] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.189190] i8042: Warning: Keylock active
[ 2.191483] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.191513] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.191675] mousedev: PS/2 mouse device common for all mice
[ 2.191934] rtc_cmos 00:01: RTC can wake from S4
[ 2.192620] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 2.192710] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.192718] intel_pstate: Intel P-state driver initializing
[ 2.192996] intel_pstate: HWP enabled
[ 2.193000] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.193001] EFI Variables Facility v0.08 2004-May-17
[ 2.193533] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.198068] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.281453] NET: Registered protocol family 10
[ 2.282117] microcode: CPU0 sig=0x406e3, pf=0x80, revision=0x82
[ 2.282125] microcode: CPU1 sig=0x406e3, pf=0x80, revision=0x82
[ 2.282143] microcode: CPU2 sig=0x406e3, pf=0x80, revision=0x82
[ 2.282156] microcode: CPU3 sig=0x406e3, pf=0x80, revision=0x82
[ 2.282244] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.282518] registered taskstats version 1
[ 2.282539] zswap: loaded using pool lzo/zbud
[ 2.289182] Key type encrypted registered
[ 2.289187] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.530880] Magic number: 0:398:699
[ 2.531100] rtc_cmos 00:01: setting system clock to 2016-05-30 19:40:42 UTC (1464637242)
[ 2.531173] PM: Checking hibernation image partition /dev/nvme0n1p2
[ 2.957305] tsc: Refined TSC clocksource calibration: 2399.992 MHz
[ 2.957308] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22982fdf183, max_idle_ns: 440795240423 ns
[ 2.999263] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4734]
[ 3.030195] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1118..]
[ 3.091716] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2a1, caps: 0xf00223/0x840300/0x12e800/0x0, board id: 3038, fw id: 2011643
[ 3.130500] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 3.133494] PM: Hibernation image not present or could not be loaded.
[ 3.134712] Freeing unused kernel memory: 1656K (ffffffff81d1b000 - ffffffff81eb9000)
[ 3.134715] Write protecting the kernel read-only data: 12288k
[ 3.135294] Freeing unused kernel memory: 1476K (ffff88000168f000 - ffff880001800000)
[ 3.138254] Freeing unused kernel memory: 1080K (ffff880001af2000 - ffff880001c00000)
[ 3.141995] random: systemd urandom read with 19 bits of entropy available
[ 3.160614] systemd[1]: systemd 210 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP +APPARMOR)
[ 3.160824] systemd[1]: Detected architecture 'x86-64'.
[ 3.160828] systemd[1]: Running in initial RAM disk.
[ 3.160910] systemd[1]: Set hostname to <jarvis>.
[ 3.208651] systemd[1]: Expecting device dev-disk-by\x2duuid-994363fd\x2dc12c\x2d4c6c\x2d92e9\x2d85e8ac695cf9.device...
[ 3.208712] systemd[1]: Starting Timers.
[ 3.208732] systemd[1]: Reached target Timers.
[ 3.208751] systemd[1]: Starting -.slice.
[ 3.224376] systemd[1]: Created slice -.slice.
[ 3.224418] systemd[1]: Starting udev Kernel Socket.
[ 3.224456] systemd[1]: Listening on udev Kernel Socket.
[ 3.224477] systemd[1]: Starting udev Control Socket.
[ 3.224516] systemd[1]: Listening on udev Control Socket.
[ 3.224535] systemd[1]: Starting Journal Socket.
[ 3.224587] systemd[1]: Listening on Journal Socket.
[ 3.224607] systemd[1]: Starting Sockets.
[ 3.224624] systemd[1]: Reached target Sockets.
[ 3.224642] systemd[1]: Starting System Slice.
[ 3.224825] systemd[1]: Created slice System Slice.
[ 3.224845] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 3.225020] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.225128] systemd[1]: Starting dracut cmdline hook...
[ 3.225710] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.226331] systemd[1]: Starting Load Kernel Modules...
[ 3.226918] systemd[1]: Starting Entropy Daemon based on the HAVEGE algorithm...
[ 3.227557] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
[ 3.228587] systemd[1]: Starting Journal Service...
[ 3.229353] systemd[1]: Starting Slices.
[ 3.229384] systemd[1]: Reached target Slices.
[ 3.229435] systemd[1]: Starting Setup Virtual Console...
[ 3.230113] systemd[1]: Starting Swap.
[ 3.230142] systemd[1]: Reached target Swap.
[ 3.230174] systemd[1]: Starting Local File Systems.
[ 3.230196] systemd[1]: Reached target Local File Systems.
[ 3.230791] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 3.231107] systemd[1]: Started Load Kernel Modules.
[ 3.232688] systemd[1]: Starting Apply Kernel Variables...
[ 3.233488] systemd[1]: Starting Create static device nodes in /dev...
[ 3.236341] systemd[1]: Started Apply Kernel Variables.
[ 3.250794] systemd[1]: Started Create static device nodes in /dev.
[ 3.265362] systemd[1]: Started Setup Virtual Console.
[ 3.276968] systemd[1]: Started Journal Service.
[ 3.440925] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 3.443016] ACPI: Lid Switch [LID0]
[ 3.443080] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 3.443254] ACPI: Power Button [PBTN]
[ 3.443310] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[ 3.443354] ACPI: Sleep Button [SBTN]
[ 3.443413] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 3.443454] ACPI: Power Button [PWRF]
[ 3.494009] [drm] Initialized drm 1.1.0 20060810
[ 3.494624] ACPI: bus type USB registered
[ 3.494681] usbcore: registered new interface driver usbfs
[ 3.494709] usbcore: registered new interface driver hub
[ 3.494734] usbcore: registered new device driver usb
[ 3.496057] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.496073] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 3.497548] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 3.497577] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 3.497876] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.497884] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.497885] usb usb1: Product: xHCI Host Controller
[ 3.497886] usb usb1: Manufacturer: Linux 4.7.0-rc1+ xhci-hcd
[ 3.497887] usb usb1: SerialNumber: 0000:00:14.0
[ 3.498136] hub 1-0:1.0: USB hub found
[ 3.498211] hub 1-0:1.0: 12 ports detected
[ 3.518208] rtsx_pci 0000:3b:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 124
[ 3.520256] nvme nvme0: pci function 0000:3c:00.0
[ 3.532479] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.532485] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 3.532739] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.532741] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.532743] usb usb2: Product: xHCI Host Controller
[ 3.532745] usb usb2: Manufacturer: Linux 4.7.0-rc1+ xhci-hcd
[ 3.532746] usb usb2: SerialNumber: 0000:00:14.0
[ 3.532970] hub 2-0:1.0: USB hub found
[ 3.533008] hub 2-0:1.0: 6 ports detected
[ 3.538242] usb: port power management may be unreliable
[ 3.613657] [drm] Memory usable by graphics device = 4096M
[ 3.613661] checking generic (90000000 15f9000) vs hw (90000000 10000000)
[ 3.613662] fb: switching to inteldrmfb from EFI VGA
[ 3.613692] Console: switching to colour dummy device 80x25
[ 3.613787] [drm] Replacing VGA console driver
[ 3.619481] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.619485] [drm] Driver supports precise vblank timestamp query.
[ 3.629464] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.632867] [drm] Finished loading i915/skl_dmc_ver1.bin (v1.26)
[ 3.644364] nvme0n1: p1 p2 p3 p4
[ 3.645446] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.647997] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 3.648743] [drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0
[ 3.729362] raid6: sse2x1 gen() 6580 MB/s
[ 3.797329] raid6: sse2x1 xor() 4087 MB/s
[ 3.865349] raid6: sse2x2 gen() 8293 MB/s
[ 3.913450] fbcon: inteldrmfb (fb0) is primary device
[ 3.933312] raid6: sse2x2 xor() 6051 MB/s
[ 3.965329] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 4.001342] raid6: sse2x4 gen() 9754 MB/s
[ 4.069350] raid6: sse2x4 xor() 7007 MB/s
[ 4.069351] clocksource: Switched to clocksource tsc
[ 4.098414] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2a
[ 4.098415] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.137257] raid6: avx2x1 gen() 12003 MB/s
[ 4.205258] raid6: avx2x2 gen() 15599 MB/s
[ 4.213263] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[ 4.273266] raid6: avx2x4 gen() 22635 MB/s
[ 4.273267] raid6: using algorithm avx2x4 gen() 22635 MB/s
[ 4.273267] raid6: using avx2x2 recovery algorithm
[ 4.273429] xor: automatically using best checksumming function:
[ 4.313260] avx : 23170.000 MB/sec
[ 4.398808] usb 1-4: New USB device found, idVendor=04f3, idProduct=20d0
[ 4.398809] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ 4.398810] usb 1-4: Product: Touchscreen
[ 4.398810] usb 1-4: Manufacturer: ELAN
[ 4.405128] usbcore: registered new interface driver usbhid
[ 4.405128] usbhid: USB HID core driver
[ 4.541340] Btrfs loaded, assert=on
[ 4.541609] BTRFS: device fsid 994363fd-c12c-4c6c-92e9-85e8ac695cf9 devid 1 transid 239305 /dev/nvme0n1p3
[ 4.565304] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[ 4.789852] usb 1-5: New USB device found, idVendor=0bda, idProduct=5682
[ 4.789853] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 4.789854] usb 1-5: Product: Integrated_Webcam_HD
[ 4.789855] usb 1-5: Manufacturer: CKFEH41I373010052032
[ 4.789855] usb 1-5: SerialNumber: 200901010001
[ 4.857549] [drm] RC6 on
[ 5.709440] Console: switching to colour frame buffer device 400x112
[ 5.719099] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 5.762345] PM: Starting manual resume from disk
[ 5.762349] PM: Hibernation image partition 259:2 present
[ 5.762350] PM: Looking for hibernation image.
[ 5.762559] PM: Image not found (code -22)
[ 5.762561] PM: Hibernation image not present or could not be loaded.
[ 5.774266] BTRFS info (device nvme0n1p3): disk space caching is enabled
[ 5.774269] BTRFS info (device nvme0n1p3): has skinny extents
[ 5.784851] BTRFS info (device nvme0n1p3): detected SSD devices, enabling SSD mode
[ 6.028042] systemd-journald[140]: Received SIGTERM from PID 1 (systemd).
[ 6.211204] BTRFS info (device nvme0n1p3): disk space caching is enabled
[ 6.219352] random: nonblocking pool is initialized
[ 6.257883] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 6.260411] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 6.280386] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 6.288792] acpi INT33D5:00: intel-hid: created platform device
[ 6.288921] input: Intel HID events as /devices/platform/INT33D5:00/input/input8
[ 6.300684] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 6.300997] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 6.315932] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 6.326273] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.326283] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.326290] ACPI Error: Method parse/execution failed [\_TZ.FN00._ON] (Node ffff88027ed78f28), AE_NOT_FOUND (20160422/psparse-542)
[ 6.326300] acpi PNP0C0B:00: Failed to change power state to D0
[ 6.326850] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 6.332304] ACPI: Battery Slot [BAT0] (battery present)
[ 6.334145] thermal LNXTHERM:00: registered as thermal_zone4
[ 6.334148] ACPI: Thermal Zone [THM] (25 C)
[ 6.335114] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.335126] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.335133] ACPI Error: Method parse/execution failed [\_TZ.FN00._ON] (Node ffff88027ed78f28), AE_NOT_FOUND (20160422/psparse-542)
[ 6.335144] acpi PNP0C0B:00: Failed to set initial power state
[ 6.335202] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.CHRG] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.335209] ACPI Error: Method parse/execution failed [\PNOT] (Node ffff88027edee758), AE_NOT_FOUND (20160422/psparse-542)
[ 6.335214] ACPI Error: Method parse/execution failed [\_SB.AC._PSR] (Node ffff88027ed41528), AE_NOT_FOUND (20160422/psparse-542)
[ 6.335222] ACPI Exception: AE_NOT_FOUND, Error reading AC Adapter state (20160422/ac-128)
[ 6.335560] wmi: Mapper loaded
[ 6.339542] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.339551] ACPI Error: Method parse/execution failed [\_TZ.TZ00._TMP] (Node ffff88027ed7b6e0), AE_NOT_FOUND (20160422/psparse-542)
[ 6.339780] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.339785] ACPI Error: Method parse/execution failed [\_TZ.TZ00._TMP] (Node ffff88027ed7b6e0), AE_NOT_FOUND (20160422/psparse-542)
[ 6.339883] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.339888] ACPI Error: Method parse/execution failed [\_TZ.TZ01._TMP] (Node ffff88027ed7b618), AE_NOT_FOUND (20160422/psparse-542)
[ 6.339971] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.339976] ACPI Error: Method parse/execution failed [\_TZ.TZ01._TMP] (Node ffff88027ed7b618), AE_NOT_FOUND (20160422/psparse-542)
[ 6.341961] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.342357] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB.PCI0.SBUS.SMBI) (20160422/utaddress-255)
[ 6.342363] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.374285] Bluetooth: Core ver 2.21
[ 6.374318] NET: Registered protocol family 31
[ 6.374320] Bluetooth: HCI device and connection manager initialized
[ 6.374324] Bluetooth: HCI socket layer initialized
[ 6.374326] Bluetooth: L2CAP socket layer initialized
[ 6.374332] Bluetooth: SCO socket layer initialized
[ 6.397815] Bluetooth: HCI UART driver ver 2.3
[ 6.397819] Bluetooth: HCI UART protocol H4 registered
[ 6.397820] Bluetooth: HCI UART protocol BCSP registered
[ 6.397822] Bluetooth: HCI UART protocol LL registered
[ 6.397823] Bluetooth: HCI UART protocol ATH3K registered
[ 6.397824] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 6.397887] Bluetooth: HCI UART protocol Intel registered
[ 6.397905] Bluetooth: HCI UART protocol BCM registered
[ 6.397906] Bluetooth: HCI UART protocol QCA registered
[ 6.405480] AVX2 version of gcm_enc/dec engaged.
[ 6.405484] AES CTR mode by8 optimization enabled
[ 6.412910] Intel(R) Wireless WiFi driver for Linux
[ 6.412913] Copyright(c) 2003- 2015 Intel Corporation
[ 6.412993] iwlwifi 0000:3a:00.0: enabling device (0000 -> 0002)
[ 6.414543] iwlwifi 0000:3a:00.0: Unsupported splx structure
[ 6.421709] iwlwifi 0000:3a:00.0: loaded firmware version 21.302800.0 op_mode iwlmvm
[ 6.433757] acpi PNP0C0B:00: Cannot transition from (unknown) to D3hot
[ 6.441541] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.441549] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.441557] ACPI Error: Method parse/execution failed [\_TZ.FN01._ON] (Node ffff88027ed78de8), AE_NOT_FOUND (20160422/psparse-542)
[ 6.441565] acpi PNP0C0B:01: Failed to change power state to D0
[ 6.449519] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.449528] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.449536] ACPI Error: Method parse/execution failed [\_TZ.FN01._ON] (Node ffff88027ed78de8), AE_NOT_FOUND (20160422/psparse-542)
[ 6.449546] acpi PNP0C0B:01: Failed to set initial power state
[ 6.456203] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 6.457351] int3403 thermal: probe of INT3403:03 failed with error -22
[ 6.462986] iwlwifi 0000:3a:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[ 6.463446] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 6.463844] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 6.465054] iwlwifi 0000:3a:00.0: L1 Enabled - LTR Disabled
[ 6.465252] iwlwifi 0000:3a:00.0: L1 Enabled - LTR Disabled
[ 6.489421] acpi PNP0C0B:01: Cannot transition from (unknown) to D3hot
[ 6.489714] Adding 2096124k swap on /dev/nvme0n1p2. Priority:-1 extents:1 across:2096124k SSFS
[ 6.497577] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.497588] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.497598] ACPI Error: Method parse/execution failed [\_TZ.FN02._ON] (Node ffff88027ed78ca8), AE_NOT_FOUND (20160422/psparse-542)
[ 6.497609] acpi PNP0C0B:02: Failed to change power state to D0
[ 6.505518] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.505542] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.505551] ACPI Error: Method parse/execution failed [\_TZ.FN02._ON] (Node ffff88027ed78ca8), AE_NOT_FOUND (20160422/psparse-542)
[ 6.505561] acpi PNP0C0B:02: Failed to set initial power state
[ 6.525329] acpi PNP0C0B:02: Cannot transition from (unknown) to D3hot
[ 6.529824] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 6.529828] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.529830] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 6.529832] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.529833] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.529835] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 6.529837] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 6.529839] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 6.533547] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.533558] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.533567] ACPI Error: Method parse/execution failed [\_TZ.FN03._ON] (Node ffff88027ed78b68), AE_NOT_FOUND (20160422/psparse-542)
[ 6.533577] acpi PNP0C0B:03: Failed to change power state to D0
[ 6.536935] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 6.543632] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 6.546255] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 6.547377] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 6.547540] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 6.547617] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 6.548016] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 6.548652] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.548661] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.548668] ACPI Error: Method parse/execution failed [\_TZ.FN03._ON] (Node ffff88027ed78b68), AE_NOT_FOUND (20160422/psparse-542)
[ 6.548683] acpi PNP0C0B:03: Failed to set initial power state
[ 6.565354] acpi PNP0C0B:03: Cannot transition from (unknown) to D3hot
[ 6.573311] device-mapper: uevent: version 1.0.3
[ 6.573543] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.573553] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.573562] ACPI Error: Method parse/execution failed [\_TZ.FN04._ON] (Node ffff88027ed78a28), AE_NOT_FOUND (20160422/psparse-542)
[ 6.573573] acpi PNP0C0B:04: Failed to change power state to D0
[ 6.581518] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.581549] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.581556] ACPI Error: Method parse/execution failed [\_TZ.FN04._ON] (Node ffff88027ed78a28), AE_NOT_FOUND (20160422/psparse-542)
[ 6.581566] acpi PNP0C0B:04: Failed to set initial power state
[ 6.589375] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 6.597368] acpi PNP0C0B:04: Cannot transition from (unknown) to D3hot
[ 6.599862] ACPI Warning: \_SB.IETM._ART: Return Package type mismatch at index 0 - found Integer, expected Reference (20160422/nspredef-297)
[ 6.599871] ACPI: Invalid package element [0]: got number, expecting [R]
[ 6.599873] _ART package 0 is invalid, ignored
[ 6.600251] input: PC Speaker as /devices/platform/pcspkr/input/input14
[ 6.688756] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:20D0.0001/input/input15
[ 6.688958] hid-multitouch 0003:04F3:20D0.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[ 6.696909] input: DLL0704:01 06CB:76AE Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-DLL0704:01/0018:06CB:76AE.0002/input/input17
[ 6.697041] hid-multitouch 0018:06CB:76AE.0002: input,hidraw1: I2C HID v1.00 Mouse [DLL0704:01 06CB:76AE] on i2c-DLL0704:01
[ 6.947538] systemd-journald[378]: Received request to flush runtime journal from PID 1
[ 6.949158] audit: type=1305 audit(1464637246.910:2): audit_pid=792 old=0 auid=4294967295 ses=4294967295 res=1
[ 6.984618] systemd-journald[378]: File /var/log/journal/69c54807c3cb473b82a49c7b7e022c37/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 7.406991] Linux video capture interface: v2.00
[ 7.490406] usbcore: registered new interface driver btusb
[ 7.505817] Bluetooth: hci0: read Intel version: 370810011003110e23
[ 7.505821] Bluetooth: hci0: Intel device is already patched. patch num: 23
[ 7.510120] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5682)
[ 7.519169] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input19
[ 7.519255] usbcore: registered new interface driver uvcvideo
[ 7.519257] USB Video Class driver (1.1.1)
[ 7.863528] systemd-journald[378]: Received request to flush runtime journal from PID 1
[ 12.935479] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.935481] Bluetooth: BNEP filters: protocol multicast
[ 12.935485] Bluetooth: BNEP socket layer initialized
[ 12.980072] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 12.997454] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 13.029906] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.029955] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 13.154614] XFS (dm-0): Mounting V5 Filesystem
[ 13.173927] XFS (dm-0): Ending clean mount
[ 13.531564] iwlwifi 0000:3a:00.0: L1 Enabled - LTR Disabled
[ 13.531862] iwlwifi 0000:3a:00.0: L1 Enabled - LTR Disabled
[ 13.596889] iwlwifi 0000:3a:00.0: L1 Enabled - LTR Disabled
[ 13.597186] iwlwifi 0000:3a:00.0: L1 Enabled - LTR Disabled
[ 13.630776] NET: Registered protocol family 17
[-- Attachment #4: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Skylake graphics regression: projector failure with 4.8-rc3
2016-08-26 13:10 ` James Bottomley
(?)
@ 2016-08-26 13:11 ` James Bottomley
-1 siblings, 0 replies; 17+ messages in thread
From: James Bottomley @ 2016-08-26 13:11 UTC (permalink / raw)
To: intel-gfx, dri-devel; +Cc: linux-kernel
On Fri, 2016-08-26 at 09:10 -0400, James Bottomley wrote:
> We seem to have an xrandr regression with skylake now. What's
> happening is that I can get output on to a projector, but the system
> is losing video when I change the xrandr sessions (like going from a
> --above b to a --same-as b). The main screen goes blank, which is
> basically a reboot situation. Unfortunately, I can't seem to get the
> logs out of systemd to see if there was a dump to dmesg (the system
> was definitely responding).
>
> I fell back to 4.6.2 which worked perfectly, so this is definitely
> some sort of regression. I'll be able to debug more fully when I get
> back home from the Linux Security Summit.
Sorry, ignore the logs: they're from a previous bug; as I said I'll try
to gather logs when I get back to a more controlled environment over
the weekend.
James
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Skylake graphics regression: projector failure with 4.8-rc3
2016-08-26 13:10 ` James Bottomley
@ 2016-08-31 18:23 ` James Bottomley
-1 siblings, 0 replies; 17+ messages in thread
From: James Bottomley @ 2016-08-31 18:23 UTC (permalink / raw)
To: intel-gfx, dri-devel; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1497 bytes --]
On Fri, 2016-08-26 at 09:10 -0400, James Bottomley wrote:
> We seem to have an xrandr regression with skylake now. What's
> happening is that I can get output on to a projector, but the system
> is losing video when I change the xrandr sessions (like going from a
> --above b to a --same-as b). The main screen goes blank, which is
> basically a reboot situation. Unfortunately, I can't seem to get the
> logs out of systemd to see if there was a dump to dmesg (the system
> was definitely responding).
>
> I fell back to 4.6.2 which worked perfectly, so this is definitely
> some sort of regression. I'll be able to debug more fully when I get
> back home from the Linux Security Summit.
I'm home now. Unfortunately, my monitor isn't as problematic as the
projector, but by flipping between various modes and separating and
overlaying the panels with --above and --same-as (xrandr), I can
eventually get it to the point where the main LCD panel goes black and
can only be restarted by specifying a different mode.
This seems to be associated with these lines in the X
[ 14714.389] (EE) intel(0): failed to set mode: Invalid argument [22]
But the curious thing is that even if this fails with the error message
once, it may succeed a second time, so it looks to be a transient error
translation problem from the kernel driver.
I've attached the full log below.
This is only with a VGA output. I currently don't have a HDMI dongle,
but I'm in the process of acquiring one.
James
[-- Attachment #2: Xorg.0.log --]
[-- Type: text/x-log, Size: 31792 bytes --]
[ 30.672]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[ 30.672] X Protocol Version 11, Revision 0
[ 30.672] Build Operating System: openSUSE SUSE LINUX
[ 30.672] Current Operating System: Linux jarvis 4.8.0-rc3+ #12 SMP PREEMPT Mon Aug 22 08:16:45 EDT 2016 x86_64
[ 30.672] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-test root=UUID=994363fd-c12c-4c6c-92e9-85e8ac695cf9 ro resume=/dev/nvme0n1p2 splash=silent quiet showopts pcie_aspm=force
[ 30.672] Build Date: 07 March 2016 08:22:28AM
[ 30.672]
[ 30.672] Current version of pixman: 0.32.6
[ 30.672] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 30.672] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 30.673] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 31 07:10:56 2016
[ 30.673] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 30.673] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 30.673] (==) No Layout section. Using the first Screen section.
[ 30.673] (==) No screen section available. Using defaults.
[ 30.673] (**) |-->Screen "Default Screen Section" (0)
[ 30.673] (**) | |-->Monitor "<default monitor>"
[ 30.673] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 30.673] (==) Automatically adding devices
[ 30.673] (==) Automatically enabling devices
[ 30.673] (==) Automatically adding GPU devices
[ 30.674] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[ 30.674] Entry deleted from font path.
[ 30.674] (==) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/ghostscript/,
/usr/share/fonts/cyrillic:unscaled,
/usr/share/fonts/truetype/,
built-ins
[ 30.674] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 30.674] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 30.674] (II) Loader magic: 0x80dd00
[ 30.674] (II) Module ABI versions:
[ 30.674] X.Org ANSI C Emulation: 0.4
[ 30.674] X.Org Video Driver: 19.0
[ 30.674] X.Org XInput driver : 21.0
[ 30.674] X.Org Server Extension : 9.0
[ 30.675] (++) using VT number 7
[ 30.675] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 30.675] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 30.688] (--) PCI:*(0:0:2:0) 8086:1916:1028:0704 rev 7, Mem @ 0xdb000000/16777216, 0x90000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 30.688] (II) LoadModule: "glx"
[ 30.689] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 30.691] (II) Module glx: vendor="X.Org Foundation"
[ 30.691] compiled for 1.17.2, module version = 1.0.0
[ 30.691] ABI class: X.Org Server Extension, version 9.0
[ 30.691] (==) AIGLX enabled
[ 30.691] (==) Matched intel as autoconfigured driver 0
[ 30.691] (==) Matched intel as autoconfigured driver 1
[ 30.691] (==) Matched modesetting as autoconfigured driver 2
[ 30.691] (==) Matched fbdev as autoconfigured driver 3
[ 30.691] (==) Matched vesa as autoconfigured driver 4
[ 30.691] (==) Assigned the driver to the xf86ConfigLayout
[ 30.691] (II) LoadModule: "intel"
[ 30.691] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 30.691] (II) Module intel: vendor="X.Org Foundation"
[ 30.691] compiled for 1.17.2, module version = 2.99.917
[ 30.691] Module class: X.Org Video Driver
[ 30.691] ABI class: X.Org Video Driver, version 19.0
[ 30.691] (II) LoadModule: "modesetting"
[ 30.692] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 30.692] (II) Module modesetting: vendor="X.Org Foundation"
[ 30.692] compiled for 1.17.2, module version = 1.17.2
[ 30.692] Module class: X.Org Video Driver
[ 30.692] ABI class: X.Org Video Driver, version 19.0
[ 30.692] (II) LoadModule: "fbdev"
[ 30.692] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 30.692] (II) Module fbdev: vendor="X.Org Foundation"
[ 30.692] compiled for 1.17.2, module version = 0.4.4
[ 30.692] Module class: X.Org Video Driver
[ 30.692] ABI class: X.Org Video Driver, version 19.0
[ 30.692] (II) LoadModule: "vesa"
[ 30.692] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 30.692] (II) Module vesa: vendor="X.Org Foundation"
[ 30.692] compiled for 1.17.2, module version = 2.3.4
[ 30.692] Module class: X.Org Video Driver
[ 30.692] ABI class: X.Org Video Driver, version 19.0
[ 30.692] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 30.692] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 30.692] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 30.692] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 30.692] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 30.692] (II) FBDEV: driver for framebuffer: fbdev
[ 30.692] (II) VESA: driver for VESA chipsets: vesa
[ 30.693] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160711
[ 30.693] (WW) Falling back to old probe method for modesetting
[ 30.693] (WW) Falling back to old probe method for fbdev
[ 30.693] (II) Loading sub module "fbdevhw"
[ 30.693] (II) LoadModule: "fbdevhw"
[ 30.693] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 30.693] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 30.693] compiled for 1.17.2, module version = 0.0.2
[ 30.693] ABI class: X.Org Video Driver, version 19.0
[ 30.693] (WW) Falling back to old probe method for vesa
[ 30.693] (--) intel(0): gen9 engineering sample
[ 30.693] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[ 30.693] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 30.693] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 30.693] (==) intel(0): RGB weight 888
[ 30.693] (==) intel(0): Default visual is TrueColor
[ 30.694] (II) intel(0): Output eDP1 has no monitor section
[ 30.712] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 30.712] (II) intel(0): Enabled output eDP1
[ 30.712] (II) intel(0): Output DP1 has no monitor section
[ 30.712] (II) intel(0): Enabled output DP1
[ 30.712] (II) intel(0): Output HDMI1 has no monitor section
[ 30.712] (II) intel(0): Enabled output HDMI1
[ 30.712] (II) intel(0): Output DP2 has no monitor section
[ 30.712] (II) intel(0): Enabled output DP2
[ 30.712] (II) intel(0): Output HDMI2 has no monitor section
[ 30.712] (II) intel(0): Enabled output HDMI2
[ 30.712] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 30.712] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 30.712] (II) intel(0): Enabled output VIRTUAL1
[ 30.712] (--) intel(0): Output eDP1 using initial mode 3200x1800 on pipe 0
[ 30.712] (==) intel(0): TearFree disabled
[ 30.712] (==) intel(0): DPI set to (96, 96)
[ 30.712] (II) Loading sub module "dri2"
[ 30.712] (II) LoadModule: "dri2"
[ 30.712] (II) Module "dri2" already built-in
[ 30.712] (II) Loading sub module "present"
[ 30.712] (II) LoadModule: "present"
[ 30.712] (II) Module "present" already built-in
[ 30.712] (II) UnloadModule: "modesetting"
[ 30.712] (II) Unloading modesetting
[ 30.712] (II) UnloadModule: "fbdev"
[ 30.712] (II) Unloading fbdev
[ 30.712] (II) UnloadSubModule: "fbdevhw"
[ 30.712] (II) Unloading fbdevhw
[ 30.712] (II) UnloadModule: "vesa"
[ 30.712] (II) Unloading vesa
[ 30.712] (==) Depth 24 pixmap format is 32 bpp
[ 30.712] (II) intel(0): SNA initialized with generic backend
[ 30.712] (==) intel(0): Backing store enabled
[ 30.712] (==) intel(0): Silken mouse enabled
[ 30.712] (II) intel(0): HW Cursor enabled
[ 30.712] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 30.713] (==) intel(0): DPMS enabled
[ 30.713] (==) intel(0): display hotplug detection enabled
[ 30.713] (II) intel(0): Textured video not supported on this hardware
[ 30.713] (II) intel(0): [DRI2] Setup complete
[ 30.713] (II) intel(0): [DRI2] DRI driver: i965
[ 30.713] (II) intel(0): [DRI2] VDPAU driver: i965
[ 30.713] (II) intel(0): direct rendering: DRI2 enabled
[ 30.713] (II) intel(0): hardware support for Present enabled
[ 30.713] (--) RandR disabled
[ 30.735] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 30.735] (II) AIGLX: enabled GLX_ARB_create_context
[ 30.735] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 30.735] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 30.735] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 30.735] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 30.735] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 30.735] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 30.735] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 30.735] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 30.735] (II) AIGLX: Loaded and initialized i965
[ 30.735] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 30.745] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 30.770] (II) intel(0): Setting screen physical size to 846 x 476
[ 30.834] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 30.834] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.834] (**) Power Button: Applying InputClass "system-keyboard"
[ 30.834] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.834] (II) LoadModule: "evdev"
[ 30.834] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 30.834] (II) Module evdev: vendor="X.Org Foundation"
[ 30.834] compiled for 1.17.2, module version = 2.9.2
[ 30.834] Module class: X.Org XInput Driver
[ 30.835] ABI class: X.Org XInput driver, version 21.0
[ 30.835] (II) Using input driver 'evdev' for 'Power Button'
[ 30.835] (**) Power Button: always reports core events
[ 30.835] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 30.835] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 30.835] (--) evdev: Power Button: Found keys
[ 30.835] (II) evdev: Power Button: Configuring as keyboard
[ 30.835] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[ 30.835] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 30.835] (**) Option "xkb_rules" "evdev"
[ 30.835] (**) Option "xkb_model" "pc104"
[ 30.835] (**) Option "xkb_layout" "us"
[ 30.849] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 30.849] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 30.849] (**) Video Bus: Applying InputClass "system-keyboard"
[ 30.849] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 30.849] (II) Using input driver 'evdev' for 'Video Bus'
[ 30.849] (**) Video Bus: always reports core events
[ 30.849] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 30.849] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 30.849] (--) evdev: Video Bus: Found keys
[ 30.849] (II) evdev: Video Bus: Configuring as keyboard
[ 30.849] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event6"
[ 30.849] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 30.849] (**) Option "xkb_rules" "evdev"
[ 30.849] (**) Option "xkb_model" "pc104"
[ 30.849] (**) Option "xkb_layout" "us"
[ 30.850] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 30.850] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.850] (**) Power Button: Applying InputClass "system-keyboard"
[ 30.850] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.850] (II) Using input driver 'evdev' for 'Power Button'
[ 30.850] (**) Power Button: always reports core events
[ 30.850] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 30.850] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 30.850] (--) evdev: Power Button: Found keys
[ 30.850] (II) evdev: Power Button: Configuring as keyboard
[ 30.850] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[ 30.850] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 30.850] (**) Option "xkb_rules" "evdev"
[ 30.850] (**) Option "xkb_model" "pc104"
[ 30.850] (**) Option "xkb_layout" "us"
[ 30.850] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 30.850] (II) No input driver specified, ignoring this device.
[ 30.850] (II) This device may have been added with another device file.
[ 30.850] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 30.850] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 30.850] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 30.850] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 30.850] (II) Using input driver 'evdev' for 'Sleep Button'
[ 30.850] (**) Sleep Button: always reports core events
[ 30.850] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 30.850] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 30.850] (--) evdev: Sleep Button: Found keys
[ 30.850] (II) evdev: Sleep Button: Configuring as keyboard
[ 30.850] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event4"
[ 30.850] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 30.850] (**) Option "xkb_rules" "evdev"
[ 30.850] (**) Option "xkb_model" "pc104"
[ 30.850] (**) Option "xkb_layout" "us"
[ 30.851] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event15)
[ 30.851] (**) ELAN Touchscreen: Applying InputClass "evdev touchscreen catchall"
[ 30.851] (**) ELAN Touchscreen: Applying InputClass "evdev touchscreen catchall"
[ 30.851] (II) Using input driver 'evdev' for 'ELAN Touchscreen'
[ 30.851] (**) ELAN Touchscreen: always reports core events
[ 30.851] (**) evdev: ELAN Touchscreen: Device: "/dev/input/event15"
[ 30.851] (--) evdev: ELAN Touchscreen: Vendor 0x4f3 Product 0x20d0
[ 30.851] (--) evdev: ELAN Touchscreen: Found absolute axes
[ 30.851] (--) evdev: ELAN Touchscreen: Found absolute multitouch axes
[ 30.851] (II) evdev: ELAN Touchscreen: No buttons found, faking one.
[ 30.851] (--) evdev: ELAN Touchscreen: Found x and y absolute axes
[ 30.851] (--) evdev: ELAN Touchscreen: Found absolute touchscreen
[ 30.851] (II) evdev: ELAN Touchscreen: Configuring as touchscreen
[ 30.851] (**) evdev: ELAN Touchscreen: YAxisMapping: buttons 4 and 5
[ 30.851] (**) evdev: ELAN Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.851] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:20D0.0001/input/input16/event15"
[ 30.851] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TOUCHSCREEN, id 10)
[ 30.851] (II) evdev: ELAN Touchscreen: initialized for absolute axes.
[ 30.851] (**) ELAN Touchscreen: (accel) keeping acceleration scheme 1
[ 30.851] (**) ELAN Touchscreen: (accel) acceleration profile 0
[ 30.851] (**) ELAN Touchscreen: (accel) acceleration factor: 2.000
[ 30.851] (**) ELAN Touchscreen: (accel) acceleration threshold: 4
[ 30.851] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse1)
[ 30.851] (II) No input driver specified, ignoring this device.
[ 30.851] (II) This device may have been added with another device file.
[ 30.851] (II) config/udev: Adding input device Integrated_Webcam_HD (/dev/input/event17)
[ 30.851] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[ 30.851] (**) Integrated_Webcam_HD: Applying InputClass "system-keyboard"
[ 30.851] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[ 30.851] (II) Using input driver 'evdev' for 'Integrated_Webcam_HD'
[ 30.851] (**) Integrated_Webcam_HD: always reports core events
[ 30.851] (**) evdev: Integrated_Webcam_HD: Device: "/dev/input/event17"
[ 30.852] (--) evdev: Integrated_Webcam_HD: Vendor 0xbda Product 0x5682
[ 30.852] (--) evdev: Integrated_Webcam_HD: Found keys
[ 30.852] (II) evdev: Integrated_Webcam_HD: Configuring as keyboard
[ 30.852] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input20/event17"
[ 30.852] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD" (type: KEYBOARD, id 11)
[ 30.852] (**) Option "xkb_rules" "evdev"
[ 30.852] (**) Option "xkb_model" "pc104"
[ 30.852] (**) Option "xkb_layout" "us"
[ 30.852] (II) config/udev: Adding input device DLL0704:01 06CB:76AE Touchpad (/dev/input/event16)
[ 30.852] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "evdev touchpad catchall"
[ 30.852] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "evdev touchpad catchall"
[ 30.852] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "touchpad catchall"
[ 30.852] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "Default clickpad buttons"
[ 30.852] (II) LoadModule: "synaptics"
[ 30.852] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 30.852] (II) Module synaptics: vendor="X.Org Foundation"
[ 30.852] compiled for 1.17.2, module version = 1.8.2
[ 30.852] Module class: X.Org XInput Driver
[ 30.852] ABI class: X.Org XInput driver, version 21.0
[ 30.852] (II) Using input driver 'synaptics' for 'DLL0704:01 06CB:76AE Touchpad'
[ 30.852] (**) DLL0704:01 06CB:76AE Touchpad: always reports core events
[ 30.852] (**) Option "Device" "/dev/input/event16"
[ 30.932] (II) synaptics: DLL0704:01 06CB:76AE Touchpad: found clickpad property
[ 30.932] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: x-axis range 0 - 1216 (res 12)
[ 30.932] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: y-axis range 0 - 680 (res 12)
[ 30.932] (II) synaptics: DLL0704:01 06CB:76AE Touchpad: device does not report pressure, will use touch data.
[ 30.932] (II) synaptics: DLL0704:01 06CB:76AE Touchpad: device does not report finger width.
[ 30.932] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: buttons: left double triple
[ 30.932] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: Vendor 0x6cb Product 0x76ae
[ 30.932] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: invalid pressure range. defaulting to 0 - 255
[ 30.932] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: invalid finger width range. defaulting to 0 - 15
[ 30.932] (**) Option "HorizEdgeScroll" "off"
[ 30.932] (**) Option "TapButton1" "1"
[ 30.932] (**) Option "TapButton2" "3"
[ 30.932] (**) Option "TapButton3" "2"
[ 30.932] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 30.932] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: touchpad found
[ 30.932] (**) DLL0704:01 06CB:76AE Touchpad: always reports core events
[ 30.976] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL0704:01/0018:06CB:76AE.0002/input/input18/event16"
[ 30.976] (II) XINPUT: Adding extended input device "DLL0704:01 06CB:76AE Touchpad" (type: TOUCHPAD, id 12)
[ 30.976] (**) synaptics: DLL0704:01 06CB:76AE Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 30.976] (**) synaptics: DLL0704:01 06CB:76AE Touchpad: (accel) MaxSpeed is now 1.75
[ 30.976] (**) synaptics: DLL0704:01 06CB:76AE Touchpad: (accel) AccelFactor is now 0.144
[ 30.976] (**) DLL0704:01 06CB:76AE Touchpad: (accel) keeping acceleration scheme 1
[ 30.976] (**) DLL0704:01 06CB:76AE Touchpad: (accel) acceleration profile 1
[ 30.976] (**) DLL0704:01 06CB:76AE Touchpad: (accel) acceleration factor: 2.000
[ 30.976] (**) DLL0704:01 06CB:76AE Touchpad: (accel) acceleration threshold: 4
[ 30.976] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: touchpad found
[ 30.977] (II) config/udev: Adding input device DLL0704:01 06CB:76AE Touchpad (/dev/input/mouse2)
[ 30.977] (**) DLL0704:01 06CB:76AE Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 30.977] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 30.977] (II) No input driver specified, ignoring this device.
[ 30.977] (II) This device may have been added with another device file.
[ 30.977] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event11)
[ 30.977] (II) No input driver specified, ignoring this device.
[ 30.977] (II) This device may have been added with another device file.
[ 30.977] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 30.977] (II) No input driver specified, ignoring this device.
[ 30.977] (II) This device may have been added with another device file.
[ 30.977] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13)
[ 30.977] (II) No input driver specified, ignoring this device.
[ 30.977] (II) This device may have been added with another device file.
[ 30.977] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
[ 30.977] (II) No input driver specified, ignoring this device.
[ 30.977] (II) This device may have been added with another device file.
[ 30.978] (II) config/udev: Adding input device Intel HID events (/dev/input/event7)
[ 30.978] (**) Intel HID events: Applying InputClass "evdev keyboard catchall"
[ 30.978] (**) Intel HID events: Applying InputClass "system-keyboard"
[ 30.978] (**) Intel HID events: Applying InputClass "evdev keyboard catchall"
[ 30.978] (II) Using input driver 'evdev' for 'Intel HID events'
[ 30.978] (**) Intel HID events: always reports core events
[ 30.978] (**) evdev: Intel HID events: Device: "/dev/input/event7"
[ 30.978] (--) evdev: Intel HID events: Vendor 0 Product 0
[ 30.978] (--) evdev: Intel HID events: Found keys
[ 30.978] (II) evdev: Intel HID events: Configuring as keyboard
[ 30.978] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input8/event7"
[ 30.978] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 13)
[ 30.978] (**) Option "xkb_rules" "evdev"
[ 30.978] (**) Option "xkb_model" "pc104"
[ 30.978] (**) Option "xkb_layout" "us"
[ 30.978] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 30.978] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.978] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 30.978] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.978] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 30.978] (**) AT Translated Set 2 keyboard: always reports core events
[ 30.978] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 30.978] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 30.978] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 30.978] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 30.978] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 30.978] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 30.978] (**) Option "xkb_rules" "evdev"
[ 30.978] (**) Option "xkb_model" "pc104"
[ 30.978] (**) Option "xkb_layout" "us"
[ 30.979] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[ 30.979] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 30.979] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 30.979] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 30.979] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 30.979] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 30.979] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 30.979] (**) Option "Device" "/dev/input/event1"
[ 31.060] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 31.060] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1276 - 5666 (res 0)
[ 31.060] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1118 - 4734 (res 0)
[ 31.060] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 31.060] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 31.060] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 31.060] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 31.060] (**) Option "HorizEdgeScroll" "off"
[ 31.060] (**) Option "TapButton1" "1"
[ 31.060] (**) Option "TapButton2" "3"
[ 31.060] (**) Option "TapButton3" "2"
[ 31.060] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 31.060] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 31.060] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 31.092] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[ 31.092] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[ 31.092] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 31.092] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 31.092] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[ 31.092] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 31.092] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 31.092] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 31.092] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 31.092] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 31.092] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 31.092] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 31.092] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 31.092] (II) No input driver specified, ignoring this device.
[ 31.092] (II) This device may have been added with another device file.
[ 31.093] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event9)
[ 31.093] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 31.093] (**) Dell WMI hotkeys: Applying InputClass "system-keyboard"
[ 31.093] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 31.093] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 31.093] (**) Dell WMI hotkeys: always reports core events
[ 31.093] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event9"
[ 31.093] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 31.093] (--) evdev: Dell WMI hotkeys: Found keys
[ 31.093] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 31.093] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event9"
[ 31.093] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 16)
[ 31.093] (**) Option "xkb_rules" "evdev"
[ 31.093] (**) Option "xkb_model" "pc104"
[ 31.093] (**) Option "xkb_layout" "us"
[ 101.648] (II) intel(0): EDID vendor "SHP", prod id 5194
[ 101.648] (II) intel(0): Printing DDC gathered Modelines:
[ 101.648] (II) intel(0): Modeline "3200x1800"x0.0 373.25 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (111.1 kHz eP)
[ 101.648] (II) intel(0): Modeline "3200x1800"x0.0 298.60 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (88.9 kHz e)
[ 14349.759] (II) intel(0): switch to mode 1600x1200@60.0 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 14378.434] (II) intel(0): resizing framebuffer to 3200x3000
[ 14378.473] (II) intel(0): switch to mode 1600x1200@60.0 on DP1 using pipe 1, position (0, 1800), rotation normal, reflection none
[ 14429.118] (II) intel(0): resizing framebuffer to 3200x1800
[ 14429.151] (II) intel(0): switch to mode 1600x1200@60.0 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 14526.343] (II) intel(0): switch to mode 1024x768@75.0 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 14526.345] (EE) intel(0): failed to set mode: Invalid argument [22]
[ 14527.685] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 14527.927] (II) intel(0): switch to mode 1600x1200@60.0 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 14553.742] (II) intel(0): switch to mode 800x600@72.2 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 14553.742] (EE) intel(0): failed to set mode: Invalid argument [22]
[ 14555.081] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 14555.326] (II) intel(0): switch to mode 1600x1200@60.0 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 14566.922] (II) intel(0): switch to mode 1400x1050@74.9 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 14592.055] (II) intel(0): switch to mode 1280x960@60.0 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 14633.704] (II) intel(0): switch to mode 1152x864@75.0 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 14659.052] (II) intel(0): switch to mode 1024x768@75.0 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 14714.371] (II) intel(0): resizing framebuffer to 3200x2568
[ 14714.389] (EE) intel(0): failed to set mode: Invalid argument [22]
[ 14715.704] (II) intel(0): switch to mode 1024x768@75.0 on DP1 using pipe 1, position (0, 1800), rotation normal, reflection none
[ 14785.629] (II) intel(0): resizing framebuffer to 3200x1800
[ 14785.640] (II) intel(0): switch to mode 1024x768@75.0 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 14866.968] (II) intel(0): resizing framebuffer to 1920x1440
[ 14866.989] (II) intel(0): switch to mode 1920x1440@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 14877.534] (II) intel(0): resizing framebuffer to 3200x1800
[ 14877.554] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Skylake graphics regression: projector failure with 4.8-rc3
@ 2016-08-31 18:23 ` James Bottomley
0 siblings, 0 replies; 17+ messages in thread
From: James Bottomley @ 2016-08-31 18:23 UTC (permalink / raw)
To: intel-gfx, dri-devel; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1497 bytes --]
On Fri, 2016-08-26 at 09:10 -0400, James Bottomley wrote:
> We seem to have an xrandr regression with skylake now. What's
> happening is that I can get output on to a projector, but the system
> is losing video when I change the xrandr sessions (like going from a
> --above b to a --same-as b). The main screen goes blank, which is
> basically a reboot situation. Unfortunately, I can't seem to get the
> logs out of systemd to see if there was a dump to dmesg (the system
> was definitely responding).
>
> I fell back to 4.6.2 which worked perfectly, so this is definitely
> some sort of regression. I'll be able to debug more fully when I get
> back home from the Linux Security Summit.
I'm home now. Unfortunately, my monitor isn't as problematic as the
projector, but by flipping between various modes and separating and
overlaying the panels with --above and --same-as (xrandr), I can
eventually get it to the point where the main LCD panel goes black and
can only be restarted by specifying a different mode.
This seems to be associated with these lines in the X
[ 14714.389] (EE) intel(0): failed to set mode: Invalid argument [22]
But the curious thing is that even if this fails with the error message
once, it may succeed a second time, so it looks to be a transient error
translation problem from the kernel driver.
I've attached the full log below.
This is only with a VGA output. I currently don't have a HDMI dongle,
but I'm in the process of acquiring one.
James
[-- Attachment #2: Xorg.0.log --]
[-- Type: text/x-log, Size: 31792 bytes --]
[ 30.672]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[ 30.672] X Protocol Version 11, Revision 0
[ 30.672] Build Operating System: openSUSE SUSE LINUX
[ 30.672] Current Operating System: Linux jarvis 4.8.0-rc3+ #12 SMP PREEMPT Mon Aug 22 08:16:45 EDT 2016 x86_64
[ 30.672] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-test root=UUID=994363fd-c12c-4c6c-92e9-85e8ac695cf9 ro resume=/dev/nvme0n1p2 splash=silent quiet showopts pcie_aspm=force
[ 30.672] Build Date: 07 March 2016 08:22:28AM
[ 30.672]
[ 30.672] Current version of pixman: 0.32.6
[ 30.672] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 30.672] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 30.673] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 31 07:10:56 2016
[ 30.673] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 30.673] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 30.673] (==) No Layout section. Using the first Screen section.
[ 30.673] (==) No screen section available. Using defaults.
[ 30.673] (**) |-->Screen "Default Screen Section" (0)
[ 30.673] (**) | |-->Monitor "<default monitor>"
[ 30.673] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 30.673] (==) Automatically adding devices
[ 30.673] (==) Automatically enabling devices
[ 30.673] (==) Automatically adding GPU devices
[ 30.674] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[ 30.674] Entry deleted from font path.
[ 30.674] (==) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/ghostscript/,
/usr/share/fonts/cyrillic:unscaled,
/usr/share/fonts/truetype/,
built-ins
[ 30.674] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 30.674] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 30.674] (II) Loader magic: 0x80dd00
[ 30.674] (II) Module ABI versions:
[ 30.674] X.Org ANSI C Emulation: 0.4
[ 30.674] X.Org Video Driver: 19.0
[ 30.674] X.Org XInput driver : 21.0
[ 30.674] X.Org Server Extension : 9.0
[ 30.675] (++) using VT number 7
[ 30.675] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 30.675] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 30.688] (--) PCI:*(0:0:2:0) 8086:1916:1028:0704 rev 7, Mem @ 0xdb000000/16777216, 0x90000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 30.688] (II) LoadModule: "glx"
[ 30.689] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 30.691] (II) Module glx: vendor="X.Org Foundation"
[ 30.691] compiled for 1.17.2, module version = 1.0.0
[ 30.691] ABI class: X.Org Server Extension, version 9.0
[ 30.691] (==) AIGLX enabled
[ 30.691] (==) Matched intel as autoconfigured driver 0
[ 30.691] (==) Matched intel as autoconfigured driver 1
[ 30.691] (==) Matched modesetting as autoconfigured driver 2
[ 30.691] (==) Matched fbdev as autoconfigured driver 3
[ 30.691] (==) Matched vesa as autoconfigured driver 4
[ 30.691] (==) Assigned the driver to the xf86ConfigLayout
[ 30.691] (II) LoadModule: "intel"
[ 30.691] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 30.691] (II) Module intel: vendor="X.Org Foundation"
[ 30.691] compiled for 1.17.2, module version = 2.99.917
[ 30.691] Module class: X.Org Video Driver
[ 30.691] ABI class: X.Org Video Driver, version 19.0
[ 30.691] (II) LoadModule: "modesetting"
[ 30.692] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 30.692] (II) Module modesetting: vendor="X.Org Foundation"
[ 30.692] compiled for 1.17.2, module version = 1.17.2
[ 30.692] Module class: X.Org Video Driver
[ 30.692] ABI class: X.Org Video Driver, version 19.0
[ 30.692] (II) LoadModule: "fbdev"
[ 30.692] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 30.692] (II) Module fbdev: vendor="X.Org Foundation"
[ 30.692] compiled for 1.17.2, module version = 0.4.4
[ 30.692] Module class: X.Org Video Driver
[ 30.692] ABI class: X.Org Video Driver, version 19.0
[ 30.692] (II) LoadModule: "vesa"
[ 30.692] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 30.692] (II) Module vesa: vendor="X.Org Foundation"
[ 30.692] compiled for 1.17.2, module version = 2.3.4
[ 30.692] Module class: X.Org Video Driver
[ 30.692] ABI class: X.Org Video Driver, version 19.0
[ 30.692] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 30.692] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 30.692] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 30.692] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 30.692] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 30.692] (II) FBDEV: driver for framebuffer: fbdev
[ 30.692] (II) VESA: driver for VESA chipsets: vesa
[ 30.693] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160711
[ 30.693] (WW) Falling back to old probe method for modesetting
[ 30.693] (WW) Falling back to old probe method for fbdev
[ 30.693] (II) Loading sub module "fbdevhw"
[ 30.693] (II) LoadModule: "fbdevhw"
[ 30.693] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 30.693] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 30.693] compiled for 1.17.2, module version = 0.0.2
[ 30.693] ABI class: X.Org Video Driver, version 19.0
[ 30.693] (WW) Falling back to old probe method for vesa
[ 30.693] (--) intel(0): gen9 engineering sample
[ 30.693] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[ 30.693] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 30.693] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 30.693] (==) intel(0): RGB weight 888
[ 30.693] (==) intel(0): Default visual is TrueColor
[ 30.694] (II) intel(0): Output eDP1 has no monitor section
[ 30.712] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 30.712] (II) intel(0): Enabled output eDP1
[ 30.712] (II) intel(0): Output DP1 has no monitor section
[ 30.712] (II) intel(0): Enabled output DP1
[ 30.712] (II) intel(0): Output HDMI1 has no monitor section
[ 30.712] (II) intel(0): Enabled output HDMI1
[ 30.712] (II) intel(0): Output DP2 has no monitor section
[ 30.712] (II) intel(0): Enabled output DP2
[ 30.712] (II) intel(0): Output HDMI2 has no monitor section
[ 30.712] (II) intel(0): Enabled output HDMI2
[ 30.712] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 30.712] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 30.712] (II) intel(0): Enabled output VIRTUAL1
[ 30.712] (--) intel(0): Output eDP1 using initial mode 3200x1800 on pipe 0
[ 30.712] (==) intel(0): TearFree disabled
[ 30.712] (==) intel(0): DPI set to (96, 96)
[ 30.712] (II) Loading sub module "dri2"
[ 30.712] (II) LoadModule: "dri2"
[ 30.712] (II) Module "dri2" already built-in
[ 30.712] (II) Loading sub module "present"
[ 30.712] (II) LoadModule: "present"
[ 30.712] (II) Module "present" already built-in
[ 30.712] (II) UnloadModule: "modesetting"
[ 30.712] (II) Unloading modesetting
[ 30.712] (II) UnloadModule: "fbdev"
[ 30.712] (II) Unloading fbdev
[ 30.712] (II) UnloadSubModule: "fbdevhw"
[ 30.712] (II) Unloading fbdevhw
[ 30.712] (II) UnloadModule: "vesa"
[ 30.712] (II) Unloading vesa
[ 30.712] (==) Depth 24 pixmap format is 32 bpp
[ 30.712] (II) intel(0): SNA initialized with generic backend
[ 30.712] (==) intel(0): Backing store enabled
[ 30.712] (==) intel(0): Silken mouse enabled
[ 30.712] (II) intel(0): HW Cursor enabled
[ 30.712] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 30.713] (==) intel(0): DPMS enabled
[ 30.713] (==) intel(0): display hotplug detection enabled
[ 30.713] (II) intel(0): Textured video not supported on this hardware
[ 30.713] (II) intel(0): [DRI2] Setup complete
[ 30.713] (II) intel(0): [DRI2] DRI driver: i965
[ 30.713] (II) intel(0): [DRI2] VDPAU driver: i965
[ 30.713] (II) intel(0): direct rendering: DRI2 enabled
[ 30.713] (II) intel(0): hardware support for Present enabled
[ 30.713] (--) RandR disabled
[ 30.735] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 30.735] (II) AIGLX: enabled GLX_ARB_create_context
[ 30.735] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 30.735] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 30.735] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 30.735] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 30.735] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 30.735] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 30.735] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 30.735] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 30.735] (II) AIGLX: Loaded and initialized i965
[ 30.735] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 30.745] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 30.770] (II) intel(0): Setting screen physical size to 846 x 476
[ 30.834] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 30.834] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.834] (**) Power Button: Applying InputClass "system-keyboard"
[ 30.834] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.834] (II) LoadModule: "evdev"
[ 30.834] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 30.834] (II) Module evdev: vendor="X.Org Foundation"
[ 30.834] compiled for 1.17.2, module version = 2.9.2
[ 30.834] Module class: X.Org XInput Driver
[ 30.835] ABI class: X.Org XInput driver, version 21.0
[ 30.835] (II) Using input driver 'evdev' for 'Power Button'
[ 30.835] (**) Power Button: always reports core events
[ 30.835] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 30.835] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 30.835] (--) evdev: Power Button: Found keys
[ 30.835] (II) evdev: Power Button: Configuring as keyboard
[ 30.835] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[ 30.835] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 30.835] (**) Option "xkb_rules" "evdev"
[ 30.835] (**) Option "xkb_model" "pc104"
[ 30.835] (**) Option "xkb_layout" "us"
[ 30.849] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 30.849] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 30.849] (**) Video Bus: Applying InputClass "system-keyboard"
[ 30.849] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 30.849] (II) Using input driver 'evdev' for 'Video Bus'
[ 30.849] (**) Video Bus: always reports core events
[ 30.849] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 30.849] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 30.849] (--) evdev: Video Bus: Found keys
[ 30.849] (II) evdev: Video Bus: Configuring as keyboard
[ 30.849] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event6"
[ 30.849] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 30.849] (**) Option "xkb_rules" "evdev"
[ 30.849] (**) Option "xkb_model" "pc104"
[ 30.849] (**) Option "xkb_layout" "us"
[ 30.850] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 30.850] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.850] (**) Power Button: Applying InputClass "system-keyboard"
[ 30.850] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.850] (II) Using input driver 'evdev' for 'Power Button'
[ 30.850] (**) Power Button: always reports core events
[ 30.850] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 30.850] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 30.850] (--) evdev: Power Button: Found keys
[ 30.850] (II) evdev: Power Button: Configuring as keyboard
[ 30.850] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[ 30.850] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 30.850] (**) Option "xkb_rules" "evdev"
[ 30.850] (**) Option "xkb_model" "pc104"
[ 30.850] (**) Option "xkb_layout" "us"
[ 30.850] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 30.850] (II) No input driver specified, ignoring this device.
[ 30.850] (II) This device may have been added with another device file.
[ 30.850] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 30.850] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 30.850] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 30.850] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 30.850] (II) Using input driver 'evdev' for 'Sleep Button'
[ 30.850] (**) Sleep Button: always reports core events
[ 30.850] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 30.850] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 30.850] (--) evdev: Sleep Button: Found keys
[ 30.850] (II) evdev: Sleep Button: Configuring as keyboard
[ 30.850] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event4"
[ 30.850] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 30.850] (**) Option "xkb_rules" "evdev"
[ 30.850] (**) Option "xkb_model" "pc104"
[ 30.850] (**) Option "xkb_layout" "us"
[ 30.851] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event15)
[ 30.851] (**) ELAN Touchscreen: Applying InputClass "evdev touchscreen catchall"
[ 30.851] (**) ELAN Touchscreen: Applying InputClass "evdev touchscreen catchall"
[ 30.851] (II) Using input driver 'evdev' for 'ELAN Touchscreen'
[ 30.851] (**) ELAN Touchscreen: always reports core events
[ 30.851] (**) evdev: ELAN Touchscreen: Device: "/dev/input/event15"
[ 30.851] (--) evdev: ELAN Touchscreen: Vendor 0x4f3 Product 0x20d0
[ 30.851] (--) evdev: ELAN Touchscreen: Found absolute axes
[ 30.851] (--) evdev: ELAN Touchscreen: Found absolute multitouch axes
[ 30.851] (II) evdev: ELAN Touchscreen: No buttons found, faking one.
[ 30.851] (--) evdev: ELAN Touchscreen: Found x and y absolute axes
[ 30.851] (--) evdev: ELAN Touchscreen: Found absolute touchscreen
[ 30.851] (II) evdev: ELAN Touchscreen: Configuring as touchscreen
[ 30.851] (**) evdev: ELAN Touchscreen: YAxisMapping: buttons 4 and 5
[ 30.851] (**) evdev: ELAN Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.851] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:20D0.0001/input/input16/event15"
[ 30.851] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TOUCHSCREEN, id 10)
[ 30.851] (II) evdev: ELAN Touchscreen: initialized for absolute axes.
[ 30.851] (**) ELAN Touchscreen: (accel) keeping acceleration scheme 1
[ 30.851] (**) ELAN Touchscreen: (accel) acceleration profile 0
[ 30.851] (**) ELAN Touchscreen: (accel) acceleration factor: 2.000
[ 30.851] (**) ELAN Touchscreen: (accel) acceleration threshold: 4
[ 30.851] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse1)
[ 30.851] (II) No input driver specified, ignoring this device.
[ 30.851] (II) This device may have been added with another device file.
[ 30.851] (II) config/udev: Adding input device Integrated_Webcam_HD (/dev/input/event17)
[ 30.851] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[ 30.851] (**) Integrated_Webcam_HD: Applying InputClass "system-keyboard"
[ 30.851] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[ 30.851] (II) Using input driver 'evdev' for 'Integrated_Webcam_HD'
[ 30.851] (**) Integrated_Webcam_HD: always reports core events
[ 30.851] (**) evdev: Integrated_Webcam_HD: Device: "/dev/input/event17"
[ 30.852] (--) evdev: Integrated_Webcam_HD: Vendor 0xbda Product 0x5682
[ 30.852] (--) evdev: Integrated_Webcam_HD: Found keys
[ 30.852] (II) evdev: Integrated_Webcam_HD: Configuring as keyboard
[ 30.852] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input20/event17"
[ 30.852] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD" (type: KEYBOARD, id 11)
[ 30.852] (**) Option "xkb_rules" "evdev"
[ 30.852] (**) Option "xkb_model" "pc104"
[ 30.852] (**) Option "xkb_layout" "us"
[ 30.852] (II) config/udev: Adding input device DLL0704:01 06CB:76AE Touchpad (/dev/input/event16)
[ 30.852] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "evdev touchpad catchall"
[ 30.852] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "evdev touchpad catchall"
[ 30.852] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "touchpad catchall"
[ 30.852] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "Default clickpad buttons"
[ 30.852] (II) LoadModule: "synaptics"
[ 30.852] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 30.852] (II) Module synaptics: vendor="X.Org Foundation"
[ 30.852] compiled for 1.17.2, module version = 1.8.2
[ 30.852] Module class: X.Org XInput Driver
[ 30.852] ABI class: X.Org XInput driver, version 21.0
[ 30.852] (II) Using input driver 'synaptics' for 'DLL0704:01 06CB:76AE Touchpad'
[ 30.852] (**) DLL0704:01 06CB:76AE Touchpad: always reports core events
[ 30.852] (**) Option "Device" "/dev/input/event16"
[ 30.932] (II) synaptics: DLL0704:01 06CB:76AE Touchpad: found clickpad property
[ 30.932] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: x-axis range 0 - 1216 (res 12)
[ 30.932] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: y-axis range 0 - 680 (res 12)
[ 30.932] (II) synaptics: DLL0704:01 06CB:76AE Touchpad: device does not report pressure, will use touch data.
[ 30.932] (II) synaptics: DLL0704:01 06CB:76AE Touchpad: device does not report finger width.
[ 30.932] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: buttons: left double triple
[ 30.932] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: Vendor 0x6cb Product 0x76ae
[ 30.932] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: invalid pressure range. defaulting to 0 - 255
[ 30.932] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: invalid finger width range. defaulting to 0 - 15
[ 30.932] (**) Option "HorizEdgeScroll" "off"
[ 30.932] (**) Option "TapButton1" "1"
[ 30.932] (**) Option "TapButton2" "3"
[ 30.932] (**) Option "TapButton3" "2"
[ 30.932] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 30.932] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: touchpad found
[ 30.932] (**) DLL0704:01 06CB:76AE Touchpad: always reports core events
[ 30.976] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL0704:01/0018:06CB:76AE.0002/input/input18/event16"
[ 30.976] (II) XINPUT: Adding extended input device "DLL0704:01 06CB:76AE Touchpad" (type: TOUCHPAD, id 12)
[ 30.976] (**) synaptics: DLL0704:01 06CB:76AE Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 30.976] (**) synaptics: DLL0704:01 06CB:76AE Touchpad: (accel) MaxSpeed is now 1.75
[ 30.976] (**) synaptics: DLL0704:01 06CB:76AE Touchpad: (accel) AccelFactor is now 0.144
[ 30.976] (**) DLL0704:01 06CB:76AE Touchpad: (accel) keeping acceleration scheme 1
[ 30.976] (**) DLL0704:01 06CB:76AE Touchpad: (accel) acceleration profile 1
[ 30.976] (**) DLL0704:01 06CB:76AE Touchpad: (accel) acceleration factor: 2.000
[ 30.976] (**) DLL0704:01 06CB:76AE Touchpad: (accel) acceleration threshold: 4
[ 30.976] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: touchpad found
[ 30.977] (II) config/udev: Adding input device DLL0704:01 06CB:76AE Touchpad (/dev/input/mouse2)
[ 30.977] (**) DLL0704:01 06CB:76AE Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 30.977] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 30.977] (II) No input driver specified, ignoring this device.
[ 30.977] (II) This device may have been added with another device file.
[ 30.977] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event11)
[ 30.977] (II) No input driver specified, ignoring this device.
[ 30.977] (II) This device may have been added with another device file.
[ 30.977] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 30.977] (II) No input driver specified, ignoring this device.
[ 30.977] (II) This device may have been added with another device file.
[ 30.977] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13)
[ 30.977] (II) No input driver specified, ignoring this device.
[ 30.977] (II) This device may have been added with another device file.
[ 30.977] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
[ 30.977] (II) No input driver specified, ignoring this device.
[ 30.977] (II) This device may have been added with another device file.
[ 30.978] (II) config/udev: Adding input device Intel HID events (/dev/input/event7)
[ 30.978] (**) Intel HID events: Applying InputClass "evdev keyboard catchall"
[ 30.978] (**) Intel HID events: Applying InputClass "system-keyboard"
[ 30.978] (**) Intel HID events: Applying InputClass "evdev keyboard catchall"
[ 30.978] (II) Using input driver 'evdev' for 'Intel HID events'
[ 30.978] (**) Intel HID events: always reports core events
[ 30.978] (**) evdev: Intel HID events: Device: "/dev/input/event7"
[ 30.978] (--) evdev: Intel HID events: Vendor 0 Product 0
[ 30.978] (--) evdev: Intel HID events: Found keys
[ 30.978] (II) evdev: Intel HID events: Configuring as keyboard
[ 30.978] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input8/event7"
[ 30.978] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 13)
[ 30.978] (**) Option "xkb_rules" "evdev"
[ 30.978] (**) Option "xkb_model" "pc104"
[ 30.978] (**) Option "xkb_layout" "us"
[ 30.978] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 30.978] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.978] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 30.978] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.978] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 30.978] (**) AT Translated Set 2 keyboard: always reports core events
[ 30.978] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 30.978] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 30.978] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 30.978] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 30.978] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 30.978] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 30.978] (**) Option "xkb_rules" "evdev"
[ 30.978] (**) Option "xkb_model" "pc104"
[ 30.978] (**) Option "xkb_layout" "us"
[ 30.979] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[ 30.979] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 30.979] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 30.979] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 30.979] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 30.979] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 30.979] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 30.979] (**) Option "Device" "/dev/input/event1"
[ 31.060] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 31.060] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1276 - 5666 (res 0)
[ 31.060] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1118 - 4734 (res 0)
[ 31.060] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 31.060] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 31.060] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 31.060] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 31.060] (**) Option "HorizEdgeScroll" "off"
[ 31.060] (**) Option "TapButton1" "1"
[ 31.060] (**) Option "TapButton2" "3"
[ 31.060] (**) Option "TapButton3" "2"
[ 31.060] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 31.060] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 31.060] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 31.092] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[ 31.092] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[ 31.092] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 31.092] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 31.092] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[ 31.092] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 31.092] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 31.092] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 31.092] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 31.092] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 31.092] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 31.092] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 31.092] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 31.092] (II) No input driver specified, ignoring this device.
[ 31.092] (II) This device may have been added with another device file.
[ 31.093] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event9)
[ 31.093] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 31.093] (**) Dell WMI hotkeys: Applying InputClass "system-keyboard"
[ 31.093] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 31.093] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 31.093] (**) Dell WMI hotkeys: always reports core events
[ 31.093] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event9"
[ 31.093] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 31.093] (--) evdev: Dell WMI hotkeys: Found keys
[ 31.093] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 31.093] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event9"
[ 31.093] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 16)
[ 31.093] (**) Option "xkb_rules" "evdev"
[ 31.093] (**) Option "xkb_model" "pc104"
[ 31.093] (**) Option "xkb_layout" "us"
[ 101.648] (II) intel(0): EDID vendor "SHP", prod id 5194
[ 101.648] (II) intel(0): Printing DDC gathered Modelines:
[ 101.648] (II) intel(0): Modeline "3200x1800"x0.0 373.25 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (111.1 kHz eP)
[ 101.648] (II) intel(0): Modeline "3200x1800"x0.0 298.60 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (88.9 kHz e)
[ 14349.759] (II) intel(0): switch to mode 1600x1200@60.0 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 14378.434] (II) intel(0): resizing framebuffer to 3200x3000
[ 14378.473] (II) intel(0): switch to mode 1600x1200@60.0 on DP1 using pipe 1, position (0, 1800), rotation normal, reflection none
[ 14429.118] (II) intel(0): resizing framebuffer to 3200x1800
[ 14429.151] (II) intel(0): switch to mode 1600x1200@60.0 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 14526.343] (II) intel(0): switch to mode 1024x768@75.0 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 14526.345] (EE) intel(0): failed to set mode: Invalid argument [22]
[ 14527.685] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 14527.927] (II) intel(0): switch to mode 1600x1200@60.0 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 14553.742] (II) intel(0): switch to mode 800x600@72.2 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 14553.742] (EE) intel(0): failed to set mode: Invalid argument [22]
[ 14555.081] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 14555.326] (II) intel(0): switch to mode 1600x1200@60.0 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 14566.922] (II) intel(0): switch to mode 1400x1050@74.9 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 14592.055] (II) intel(0): switch to mode 1280x960@60.0 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 14633.704] (II) intel(0): switch to mode 1152x864@75.0 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 14659.052] (II) intel(0): switch to mode 1024x768@75.0 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 14714.371] (II) intel(0): resizing framebuffer to 3200x2568
[ 14714.389] (EE) intel(0): failed to set mode: Invalid argument [22]
[ 14715.704] (II) intel(0): switch to mode 1024x768@75.0 on DP1 using pipe 1, position (0, 1800), rotation normal, reflection none
[ 14785.629] (II) intel(0): resizing framebuffer to 3200x1800
[ 14785.640] (II) intel(0): switch to mode 1024x768@75.0 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 14866.968] (II) intel(0): resizing framebuffer to 1920x1440
[ 14866.989] (II) intel(0): switch to mode 1920x1440@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 14877.534] (II) intel(0): resizing framebuffer to 3200x1800
[ 14877.554] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[-- Attachment #3: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Skylake graphics regression: projector failure with 4.8-rc3
2016-08-31 18:23 ` James Bottomley
@ 2016-08-31 21:43 ` James Bottomley
-1 siblings, 0 replies; 17+ messages in thread
From: James Bottomley @ 2016-08-31 21:43 UTC (permalink / raw)
To: intel-gfx, dri-devel; +Cc: linux-kernel
On Wed, 2016-08-31 at 11:23 -0700, James Bottomley wrote:
> On Fri, 2016-08-26 at 09:10 -0400, James Bottomley wrote:
> > We seem to have an xrandr regression with skylake now. What's
> > happening is that I can get output on to a projector, but the
> > system is losing video when I change the xrandr sessions (like
> > going from a --above b to a --same-as b). The main screen goes
> > blank, which is basically a reboot situation. Unfortunately, I
> > can't seem to get the logs out of systemd to see if there was a
> > dump to dmesg (the system was definitely responding).
> >
> > I fell back to 4.6.2 which worked perfectly, so this is definitely
> > some sort of regression. I'll be able to debug more fully when I
> > get back home from the Linux Security Summit.
>
> I'm home now. Unfortunately, my monitor isn't as problematic as the
> projector, but by flipping between various modes and separating and
> overlaying the panels with --above and --same-as (xrandr), I can
> eventually get it to the point where the main LCD panel goes black
> and can only be restarted by specifying a different mode.
>
> This seems to be associated with these lines in the X
>
> [ 14714.389] (EE) intel(0): failed to set mode: Invalid argument [22]
>
> But the curious thing is that even if this fails with the error
> message once, it may succeed a second time, so it looks to be a
> transient error translation problem from the kernel driver.
>
> I've attached the full log below.
>
> This is only with a VGA output. I currently don't have a HDMI
> dongle, but I'm in the process of acquiring one.
After more playing around, I'm getting thousands of these in the kernel
log (possibly millions: the log wraps very fast):
[23504.873606] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting
And then finally it gives up with
[25023.770951] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe B FIFO underrun
[25561.926075] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
And the crtc for the VGA output becomes non-responsive to any
configuration command. This requires a reboot and sometimes a UEFI
variable reset before it comes back.
James
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Skylake graphics regression: projector failure with 4.8-rc3
@ 2016-08-31 21:43 ` James Bottomley
0 siblings, 0 replies; 17+ messages in thread
From: James Bottomley @ 2016-08-31 21:43 UTC (permalink / raw)
To: intel-gfx, dri-devel; +Cc: linux-kernel
On Wed, 2016-08-31 at 11:23 -0700, James Bottomley wrote:
> On Fri, 2016-08-26 at 09:10 -0400, James Bottomley wrote:
> > We seem to have an xrandr regression with skylake now. What's
> > happening is that I can get output on to a projector, but the
> > system is losing video when I change the xrandr sessions (like
> > going from a --above b to a --same-as b). The main screen goes
> > blank, which is basically a reboot situation. Unfortunately, I
> > can't seem to get the logs out of systemd to see if there was a
> > dump to dmesg (the system was definitely responding).
> >
> > I fell back to 4.6.2 which worked perfectly, so this is definitely
> > some sort of regression. I'll be able to debug more fully when I
> > get back home from the Linux Security Summit.
>
> I'm home now. Unfortunately, my monitor isn't as problematic as the
> projector, but by flipping between various modes and separating and
> overlaying the panels with --above and --same-as (xrandr), I can
> eventually get it to the point where the main LCD panel goes black
> and can only be restarted by specifying a different mode.
>
> This seems to be associated with these lines in the X
>
> [ 14714.389] (EE) intel(0): failed to set mode: Invalid argument [22]
>
> But the curious thing is that even if this fails with the error
> message once, it may succeed a second time, so it looks to be a
> transient error translation problem from the kernel driver.
>
> I've attached the full log below.
>
> This is only with a VGA output. I currently don't have a HDMI
> dongle, but I'm in the process of acquiring one.
After more playing around, I'm getting thousands of these in the kernel
log (possibly millions: the log wraps very fast):
[23504.873606] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting
And then finally it gives up with
[25023.770951] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe B FIFO underrun
[25561.926075] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
And the crtc for the VGA output becomes non-responsive to any
configuration command. This requires a reboot and sometimes a UEFI
variable reset before it comes back.
James
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Intel-gfx] Skylake graphics regression: projector failure with 4.8-rc3
2016-08-31 21:43 ` James Bottomley
@ 2016-08-31 21:51 ` Zanoni, Paulo R
-1 siblings, 0 replies; 17+ messages in thread
From: Zanoni, Paulo R @ 2016-08-31 21:51 UTC (permalink / raw)
To: dri-devel, James.Bottomley, intel-gfx; +Cc: linux-kernel
Hi
Em Qua, 2016-08-31 às 14:43 -0700, James Bottomley escreveu:
> On Wed, 2016-08-31 at 11:23 -0700, James Bottomley wrote:
> >
> > On Fri, 2016-08-26 at 09:10 -0400, James Bottomley wrote:
> > >
> > > We seem to have an xrandr regression with skylake now. What's
> > > happening is that I can get output on to a projector, but the
> > > system is losing video when I change the xrandr sessions (like
> > > going from a --above b to a --same-as b). The main screen goes
> > > blank, which is basically a reboot situation. Unfortunately, I
> > > can't seem to get the logs out of systemd to see if there was a
> > > dump to dmesg (the system was definitely responding).
> > >
> > > I fell back to 4.6.2 which worked perfectly, so this is
> > > definitely
> > > some sort of regression. I'll be able to debug more fully when
> > > I
> > > get back home from the Linux Security Summit.
> >
> > I'm home now. Unfortunately, my monitor isn't as problematic as
> > the
> > projector, but by flipping between various modes and separating and
> > overlaying the panels with --above and --same-as (xrandr), I can
> > eventually get it to the point where the main LCD panel goes black
> > and can only be restarted by specifying a different mode.
> >
> > This seems to be associated with these lines in the X
> >
> > [ 14714.389] (EE) intel(0): failed to set mode: Invalid argument
> > [22]
> >
> > But the curious thing is that even if this fails with the error
> > message once, it may succeed a second time, so it looks to be a
> > transient error translation problem from the kernel driver.
> >
> > I've attached the full log below.
> >
> > This is only with a VGA output. I currently don't have a HDMI
> > dongle, but I'm in the process of acquiring one.
>
> After more playing around, I'm getting thousands of these in the
> kernel
> log (possibly millions: the log wraps very fast):
>
> [23504.873606] [drm:intel_dp_start_link_train [i915]] *ERROR* failed
> to train DP, aborting
>
> And then finally it gives up with
>
> [25023.770951] [drm:intel_cpu_fifo_underrun_irq_handler [i915]]
> *ERROR* CPU pipe B FIFO underrun
> [25561.926075] [drm:intel_cpu_fifo_underrun_irq_handler [i915]]
> *ERROR* CPU pipe A FIFO underrun
>
> And the crtc for the VGA output becomes non-responsive to any
> configuration command. This requires a reboot and sometimes a UEFI
> variable reset before it comes back.
Please see this discussion:
https://patchwork.freedesktop.org/patch/103237/
Do you have this patch on your tree? Does the problem go away if you
revert it?
Thanks,
Paulo
>
> James
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Skylake graphics regression: projector failure with 4.8-rc3
@ 2016-08-31 21:51 ` Zanoni, Paulo R
0 siblings, 0 replies; 17+ messages in thread
From: Zanoni, Paulo R @ 2016-08-31 21:51 UTC (permalink / raw)
To: dri-devel, James.Bottomley, intel-gfx; +Cc: linux-kernel
Hi
Em Qua, 2016-08-31 às 14:43 -0700, James Bottomley escreveu:
> On Wed, 2016-08-31 at 11:23 -0700, James Bottomley wrote:
> >
> > On Fri, 2016-08-26 at 09:10 -0400, James Bottomley wrote:
> > >
> > > We seem to have an xrandr regression with skylake now. What's
> > > happening is that I can get output on to a projector, but the
> > > system is losing video when I change the xrandr sessions (like
> > > going from a --above b to a --same-as b). The main screen goes
> > > blank, which is basically a reboot situation. Unfortunately, I
> > > can't seem to get the logs out of systemd to see if there was a
> > > dump to dmesg (the system was definitely responding).
> > >
> > > I fell back to 4.6.2 which worked perfectly, so this is
> > > definitely
> > > some sort of regression. I'll be able to debug more fully when
> > > I
> > > get back home from the Linux Security Summit.
> >
> > I'm home now. Unfortunately, my monitor isn't as problematic as
> > the
> > projector, but by flipping between various modes and separating and
> > overlaying the panels with --above and --same-as (xrandr), I can
> > eventually get it to the point where the main LCD panel goes black
> > and can only be restarted by specifying a different mode.
> >
> > This seems to be associated with these lines in the X
> >
> > [ 14714.389] (EE) intel(0): failed to set mode: Invalid argument
> > [22]
> >
> > But the curious thing is that even if this fails with the error
> > message once, it may succeed a second time, so it looks to be a
> > transient error translation problem from the kernel driver.
> >
> > I've attached the full log below.
> >
> > This is only with a VGA output. I currently don't have a HDMI
> > dongle, but I'm in the process of acquiring one.
>
> After more playing around, I'm getting thousands of these in the
> kernel
> log (possibly millions: the log wraps very fast):
>
> [23504.873606] [drm:intel_dp_start_link_train [i915]] *ERROR* failed
> to train DP, aborting
>
> And then finally it gives up with
>
> [25023.770951] [drm:intel_cpu_fifo_underrun_irq_handler [i915]]
> *ERROR* CPU pipe B FIFO underrun
> [25561.926075] [drm:intel_cpu_fifo_underrun_irq_handler [i915]]
> *ERROR* CPU pipe A FIFO underrun
>
> And the crtc for the VGA output becomes non-responsive to any
> configuration command. This requires a reboot and sometimes a UEFI
> variable reset before it comes back.
Please see this discussion:
https://patchwork.freedesktop.org/patch/103237/
Do you have this patch on your tree? Does the problem go away if you
revert it?
Thanks,
Paulo
>
> James
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Intel-gfx] Skylake graphics regression: projector failure with 4.8-rc3
2016-08-31 21:51 ` Zanoni, Paulo R
@ 2016-08-31 22:25 ` James Bottomley
-1 siblings, 0 replies; 17+ messages in thread
From: James Bottomley @ 2016-08-31 22:25 UTC (permalink / raw)
To: Zanoni, Paulo R, dri-devel, intel-gfx; +Cc: linux-kernel
On Wed, 2016-08-31 at 21:51 +0000, Zanoni, Paulo R wrote:
> Hi
>
> Em Qua, 2016-08-31 às 14:43 -0700, James Bottomley escreveu:
> > On Wed, 2016-08-31 at 11:23 -0700, James Bottomley wrote:
> > >
> > > On Fri, 2016-08-26 at 09:10 -0400, James Bottomley wrote:
> > > >
> > > > We seem to have an xrandr regression with skylake now. What's
> > > > happening is that I can get output on to a projector, but the
> > > > system is losing video when I change the xrandr sessions (like
> > > > going from a --above b to a --same-as b). The main screen goes
> > > > blank, which is basically a reboot situation. Unfortunately, I
> > > > can't seem to get the logs out of systemd to see if there was a
> > > > dump to dmesg (the system was definitely responding).
> > > >
> > > > I fell back to 4.6.2 which worked perfectly, so this is
> > > > definitely
> > > > some sort of regression. I'll be able to debug more fully when
> > > > I
> > > > get back home from the Linux Security Summit.
> > >
> > > I'm home now. Unfortunately, my monitor isn't as problematic as
> > > the
> > > projector, but by flipping between various modes and separating
> > > and
> > > overlaying the panels with --above and --same-as (xrandr), I can
> > > eventually get it to the point where the main LCD panel goes
> > > black
> > > and can only be restarted by specifying a different mode.
> > >
> > > This seems to be associated with these lines in the X
> > >
> > > [ 14714.389] (EE) intel(0): failed to set mode: Invalid argument
> > > [22]
> > >
> > > But the curious thing is that even if this fails with the error
> > > message once, it may succeed a second time, so it looks to be a
> > > transient error translation problem from the kernel driver.
> > >
> > > I've attached the full log below.
> > >
> > > This is only with a VGA output. I currently don't have a HDMI
> > > dongle, but I'm in the process of acquiring one.
> >
> > After more playing around, I'm getting thousands of these in the
> > kernel
> > log (possibly millions: the log wraps very fast):
> >
> > [23504.873606] [drm:intel_dp_start_link_train [i915]] *ERROR*
> > failed
> > to train DP, aborting
> >
> > And then finally it gives up with
> >
> > [25023.770951] [drm:intel_cpu_fifo_underrun_irq_handler [i915]]
> > *ERROR* CPU pipe B FIFO underrun
> > [25561.926075] [drm:intel_cpu_fifo_underrun_irq_handler [i915]]
> > *ERROR* CPU pipe A FIFO underrun
> >
> > And the crtc for the VGA output becomes non-responsive to any
> > configuration command. This requires a reboot and sometimes a UEFI
> > variable reset before it comes back.
>
> Please see this discussion:
> https://patchwork.freedesktop.org/patch/103237/
>
> Do you have this patch on your tree? Does the problem go away if you
> revert it?
Yes, I've got it, it went in in 4.8-rc3 according to git:
commit 58e311b09c319183254d9220c50a533e7157c9ab
Author: Matt Roper <matthew.d.roper@intel.com>
Date: Thu Aug 4 14:08:00 2016 -0700
drm/i915/gen9: Give one extra block per line for SKL plane WM
calculations
Reverting it causes the secondary display not to sync pretty much at
all. However, in the flickers I can see, it does work OK and doesn't
now crash switching from --same-as to --above and back
I also still get the logs filling up with the link training errors.
On balance, although the behaviour is different, it's not an
improvement because if I can't sync with the projector, I can't really
use this as a fix.
James
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Intel-gfx] Skylake graphics regression: projector failure with 4.8-rc3
@ 2016-08-31 22:25 ` James Bottomley
0 siblings, 0 replies; 17+ messages in thread
From: James Bottomley @ 2016-08-31 22:25 UTC (permalink / raw)
To: Zanoni, Paulo R, dri-devel, intel-gfx; +Cc: linux-kernel
On Wed, 2016-08-31 at 21:51 +0000, Zanoni, Paulo R wrote:
> Hi
>
> Em Qua, 2016-08-31 às 14:43 -0700, James Bottomley escreveu:
> > On Wed, 2016-08-31 at 11:23 -0700, James Bottomley wrote:
> > >
> > > On Fri, 2016-08-26 at 09:10 -0400, James Bottomley wrote:
> > > >
> > > > We seem to have an xrandr regression with skylake now. What's
> > > > happening is that I can get output on to a projector, but the
> > > > system is losing video when I change the xrandr sessions (like
> > > > going from a --above b to a --same-as b). The main screen goes
> > > > blank, which is basically a reboot situation. Unfortunately, I
> > > > can't seem to get the logs out of systemd to see if there was a
> > > > dump to dmesg (the system was definitely responding).
> > > >
> > > > I fell back to 4.6.2 which worked perfectly, so this is
> > > > definitely
> > > > some sort of regression. I'll be able to debug more fully when
> > > > I
> > > > get back home from the Linux Security Summit.
> > >
> > > I'm home now. Unfortunately, my monitor isn't as problematic as
> > > the
> > > projector, but by flipping between various modes and separating
> > > and
> > > overlaying the panels with --above and --same-as (xrandr), I can
> > > eventually get it to the point where the main LCD panel goes
> > > black
> > > and can only be restarted by specifying a different mode.
> > >
> > > This seems to be associated with these lines in the X
> > >
> > > [ 14714.389] (EE) intel(0): failed to set mode: Invalid argument
> > > [22]
> > >
> > > But the curious thing is that even if this fails with the error
> > > message once, it may succeed a second time, so it looks to be a
> > > transient error translation problem from the kernel driver.
> > >
> > > I've attached the full log below.
> > >
> > > This is only with a VGA output. I currently don't have a HDMI
> > > dongle, but I'm in the process of acquiring one.
> >
> > After more playing around, I'm getting thousands of these in the
> > kernel
> > log (possibly millions: the log wraps very fast):
> >
> > [23504.873606] [drm:intel_dp_start_link_train [i915]] *ERROR*
> > failed
> > to train DP, aborting
> >
> > And then finally it gives up with
> >
> > [25023.770951] [drm:intel_cpu_fifo_underrun_irq_handler [i915]]
> > *ERROR* CPU pipe B FIFO underrun
> > [25561.926075] [drm:intel_cpu_fifo_underrun_irq_handler [i915]]
> > *ERROR* CPU pipe A FIFO underrun
> >
> > And the crtc for the VGA output becomes non-responsive to any
> > configuration command. This requires a reboot and sometimes a UEFI
> > variable reset before it comes back.
>
> Please see this discussion:
> https://patchwork.freedesktop.org/patch/103237/
>
> Do you have this patch on your tree? Does the problem go away if you
> revert it?
Yes, I've got it, it went in in 4.8-rc3 according to git:
commit 58e311b09c319183254d9220c50a533e7157c9ab
Author: Matt Roper <matthew.d.roper@intel.com>
Date: Thu Aug 4 14:08:00 2016 -0700
drm/i915/gen9: Give one extra block per line for SKL plane WM
calculations
Reverting it causes the secondary display not to sync pretty much at
all. However, in the flickers I can see, it does work OK and doesn't
now crash switching from --same-as to --above and back
I also still get the logs filling up with the link training errors.
On balance, although the behaviour is different, it's not an
improvement because if I can't sync with the projector, I can't really
use this as a fix.
James
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Intel-gfx] Skylake graphics regression: projector failure with 4.8-rc3
2016-08-31 22:25 ` James Bottomley
(?)
@ 2016-09-18 11:35 ` Thorsten Leemhuis
2016-09-19 15:09 ` James Bottomley
-1 siblings, 1 reply; 17+ messages in thread
From: Thorsten Leemhuis @ 2016-09-18 11:35 UTC (permalink / raw)
To: James Bottomley, Zanoni, Paulo R, dri-devel, intel-gfx; +Cc: linux-kernel
Hi! James & Paulo: What's the current status of this? Was this issue
discussed elsewhere or even fixed in between? Just asking, because this
issue is on the list of regressions for 4.8. Ciao, Thorsten
On 01.09.2016 00:25, James Bottomley wrote:
> On Wed, 2016-08-31 at 21:51 +0000, Zanoni, Paulo R wrote:
>> Em Qua, 2016-08-31 às 14:43 -0700, James Bottomley escreveu:
>>> On Wed, 2016-08-31 at 11:23 -0700, James Bottomley wrote:
>>>> On Fri, 2016-08-26 at 09:10 -0400, James Bottomley wrote:
>>>>> We seem to have an xrandr regression with skylake now. What's
>>>>> happening is that I can get output on to a projector, but the
>>>>> system is losing video when I change the xrandr sessions (like
>>>>> going from a --above b to a --same-as b). The main screen goes
>>>>> blank, which is basically a reboot situation. Unfortunately, I
>>>>> can't seem to get the logs out of systemd to see if there was a
>>>>> dump to dmesg (the system was definitely responding).
>>>>>
>>>>> I fell back to 4.6.2 which worked perfectly, so this is
>>>>> definitely
>>>>> some sort of regression. I'll be able to debug more fully when
>>>>> I
>>>>> get back home from the Linux Security Summit.
>>>>
>>>> I'm home now. Unfortunately, my monitor isn't as problematic as
>>>> the
>>>> projector, but by flipping between various modes and separating
>>>> and
>>>> overlaying the panels with --above and --same-as (xrandr), I can
>>>> eventually get it to the point where the main LCD panel goes
>>>> black
>>>> and can only be restarted by specifying a different mode.
>>>>
>>>> This seems to be associated with these lines in the X
>>>>
>>>> [ 14714.389] (EE) intel(0): failed to set mode: Invalid argument
>>>> [22]
>>>>
>>>> But the curious thing is that even if this fails with the error
>>>> message once, it may succeed a second time, so it looks to be a
>>>> transient error translation problem from the kernel driver.
>>>>
>>>> I've attached the full log below.
>>>>
>>>> This is only with a VGA output. I currently don't have a HDMI
>>>> dongle, but I'm in the process of acquiring one.
>>>
>>> After more playing around, I'm getting thousands of these in the
>>> kernel
>>> log (possibly millions: the log wraps very fast):
>>>
>>> [23504.873606] [drm:intel_dp_start_link_train [i915]] *ERROR*
>>> failed
>>> to train DP, aborting
>>>
>>> And then finally it gives up with
>>>
>>> [25023.770951] [drm:intel_cpu_fifo_underrun_irq_handler [i915]]
>>> *ERROR* CPU pipe B FIFO underrun
>>> [25561.926075] [drm:intel_cpu_fifo_underrun_irq_handler [i915]]
>>> *ERROR* CPU pipe A FIFO underrun
>>>
>>> And the crtc for the VGA output becomes non-responsive to any
>>> configuration command. This requires a reboot and sometimes a UEFI
>>> variable reset before it comes back.
>>
>> Please see this discussion:
>> https://patchwork.freedesktop.org/patch/103237/
>>
>> Do you have this patch on your tree? Does the problem go away if you
>> revert it?
>
> Yes, I've got it, it went in in 4.8-rc3 according to git:
>
> commit 58e311b09c319183254d9220c50a533e7157c9ab
> Author: Matt Roper <matthew.d.roper@intel.com>
> Date: Thu Aug 4 14:08:00 2016 -0700
>
> drm/i915/gen9: Give one extra block per line for SKL plane WM
> calculations
>
> Reverting it causes the secondary display not to sync pretty much at
> all. However, in the flickers I can see, it does work OK and doesn't
> now crash switching from --same-as to --above and back
>
> I also still get the logs filling up with the link training errors.
>
> On balance, although the behaviour is different, it's not an
> improvement because if I can't sync with the projector, I can't really
> use this as a fix.
>
> James
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Intel-gfx] Skylake graphics regression: projector failure with 4.8-rc3
2016-09-18 11:35 ` Thorsten Leemhuis
@ 2016-09-19 15:09 ` James Bottomley
2016-09-19 19:27 ` James Bottomley
0 siblings, 1 reply; 17+ messages in thread
From: James Bottomley @ 2016-09-19 15:09 UTC (permalink / raw)
To: Thorsten Leemhuis, Zanoni, Paulo R, dri-devel, intel-gfx; +Cc: linux-kernel
On Sun, 2016-09-18 at 13:35 +0200, Thorsten Leemhuis wrote:
> Hi! James & Paulo: What's the current status of this?
No, the only interaction has been the suggestion below for a revert,
which didn't fix the problem.
> Was this issue discussed elsewhere or even fixed in between? Just
> asking, because this issue is on the list of regressions for 4.8.
I'm just about to try out -rc7, but it's not fixed so far.
James
> Ciao, Thorsten
>
> On 01.09.2016 00:25, James Bottomley wrote:
> > On Wed, 2016-08-31 at 21:51 +0000, Zanoni, Paulo R wrote:
> > > Em Qua, 2016-08-31 às 14:43 -0700, James Bottomley escreveu:
> > > > On Wed, 2016-08-31 at 11:23 -0700, James Bottomley wrote:
> > > > > On Fri, 2016-08-26 at 09:10 -0400, James Bottomley wrote:
> > > > > > We seem to have an xrandr regression with skylake now.
> > > > > > What's
> > > > > > happening is that I can get output on to a projector, but
> > > > > > the
> > > > > > system is losing video when I change the xrandr sessions
> > > > > > (like
> > > > > > going from a --above b to a --same-as b). The main screen
> > > > > > goes
> > > > > > blank, which is basically a reboot situation.
> > > > > > Unfortunately, I
> > > > > > can't seem to get the logs out of systemd to see if there
> > > > > > was a
> > > > > > dump to dmesg (the system was definitely responding).
> > > > > >
> > > > > > I fell back to 4.6.2 which worked perfectly, so this is
> > > > > > definitely
> > > > > > some sort of regression. I'll be able to debug more fully
> > > > > > when
> > > > > > I
> > > > > > get back home from the Linux Security Summit.
> > > > >
> > > > > I'm home now. Unfortunately, my monitor isn't as problematic
> > > > > as
> > > > > the
> > > > > projector, but by flipping between various modes and
> > > > > separating
> > > > > and
> > > > > overlaying the panels with --above and --same-as (xrandr), I
> > > > > can
> > > > > eventually get it to the point where the main LCD panel goes
> > > > > black
> > > > > and can only be restarted by specifying a different mode.
> > > > >
> > > > > This seems to be associated with these lines in the X
> > > > >
> > > > > [ 14714.389] (EE) intel(0): failed to set mode: Invalid
> > > > > argument
> > > > > [22]
> > > > >
> > > > > But the curious thing is that even if this fails with the
> > > > > error
> > > > > message once, it may succeed a second time, so it looks to be
> > > > > a
> > > > > transient error translation problem from the kernel driver.
> > > > >
> > > > > I've attached the full log below.
> > > > >
> > > > > This is only with a VGA output. I currently don't have a
> > > > > HDMI
> > > > > dongle, but I'm in the process of acquiring one.
> > > >
> > > > After more playing around, I'm getting thousands of these in
> > > > the
> > > > kernel
> > > > log (possibly millions: the log wraps very fast):
> > > >
> > > > [23504.873606] [drm:intel_dp_start_link_train [i915]] *ERROR*
> > > > failed
> > > > to train DP, aborting
> > > >
> > > > And then finally it gives up with
> > > >
> > > > [25023.770951] [drm:intel_cpu_fifo_underrun_irq_handler [i915]]
> > > > *ERROR* CPU pipe B FIFO underrun
> > > > [25561.926075] [drm:intel_cpu_fifo_underrun_irq_handler [i915]]
> > > > *ERROR* CPU pipe A FIFO underrun
> > > >
> > > > And the crtc for the VGA output becomes non-responsive to any
> > > > configuration command. This requires a reboot and sometimes a
> > > > UEFI
> > > > variable reset before it comes back.
> > >
> > > Please see this discussion:
> > > https://patchwork.freedesktop.org/patch/103237/
> > >
> > > Do you have this patch on your tree? Does the problem go away if
> > > you
> > > revert it?
> >
> > Yes, I've got it, it went in in 4.8-rc3 according to git:
> >
> > commit 58e311b09c319183254d9220c50a533e7157c9ab
> > Author: Matt Roper <matthew.d.roper@intel.com>
> > Date: Thu Aug 4 14:08:00 2016 -0700
> >
> > drm/i915/gen9: Give one extra block per line for SKL plane WM
> > calculations
> >
> > Reverting it causes the secondary display not to sync pretty much
> > at
> > all. However, in the flickers I can see, it does work OK and
> > doesn't
> > now crash switching from --same-as to --above and back
> >
> > I also still get the logs filling up with the link training errors.
> >
> > On balance, although the behaviour is different, it's not an
> > improvement because if I can't sync with the projector, I can't
> > really
> > use this as a fix.
> >
> > James
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Intel-gfx] Skylake graphics regression: projector failure with 4.8-rc3
2016-09-19 15:09 ` James Bottomley
@ 2016-09-19 19:27 ` James Bottomley
0 siblings, 0 replies; 17+ messages in thread
From: James Bottomley @ 2016-09-19 19:27 UTC (permalink / raw)
To: Thorsten Leemhuis, Zanoni, Paulo R, dri-devel, intel-gfx; +Cc: linux-kernel
On Mon, 2016-09-19 at 08:09 -0700, James Bottomley wrote:
> On Sun, 2016-09-18 at 13:35 +0200, Thorsten Leemhuis wrote:
> > Hi! James & Paulo: What's the current status of this?
>
> No, the only interaction has been the suggestion below for a revert,
> which didn't fix the problem.
>
> > Was this issue discussed elsewhere or even fixed in between? Just
> > asking, because this issue is on the list of regressions for 4.8.
>
>
> I'm just about to try out -rc7, but it's not fixed so far.
OK, with -rc7 and the i915 fixes, there seems to be a marked
improvement. I can no longer crash the crtc by using lots of xrandr
switches, which was the principal problem.
I've so far only got one of these in the logs
[14858.635035] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR*
CPU pipe B FIFO underrun
And the only residual problem seems to be that the monitor goes blank
periodically, but this can be fixed by switching resolution a couple of
times.
I haven't seen any of the link training errors so far and I've run
through my usual battery of be nasty to the external monitor tests.
James
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Skylake graphics regression: projector failure with 4.8-rc3
@ 2016-09-19 19:27 ` James Bottomley
0 siblings, 0 replies; 17+ messages in thread
From: James Bottomley @ 2016-09-19 19:27 UTC (permalink / raw)
To: Thorsten Leemhuis, Zanoni, Paulo R, dri-devel, intel-gfx; +Cc: linux-kernel
On Mon, 2016-09-19 at 08:09 -0700, James Bottomley wrote:
> On Sun, 2016-09-18 at 13:35 +0200, Thorsten Leemhuis wrote:
> > Hi! James & Paulo: What's the current status of this?
>
> No, the only interaction has been the suggestion below for a revert,
> which didn't fix the problem.
>
> > Was this issue discussed elsewhere or even fixed in between? Just
> > asking, because this issue is on the list of regressions for 4.8.
>
>
> I'm just about to try out -rc7, but it's not fixed so far.
OK, with -rc7 and the i915 fixes, there seems to be a marked
improvement. I can no longer crash the crtc by using lots of xrandr
switches, which was the principal problem.
I've so far only got one of these in the logs
[14858.635035] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR*
CPU pipe B FIFO underrun
And the only residual problem seems to be that the monitor goes blank
periodically, but this can be fixed by switching resolution a couple of
times.
I haven't seen any of the link training errors so far and I've run
through my usual battery of be nasty to the external monitor tests.
James
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Intel-gfx] Skylake graphics regression: projector failure with 4.8-rc3
2016-09-19 19:27 ` James Bottomley
@ 2016-09-20 8:14 ` Jani Nikula
-1 siblings, 0 replies; 17+ messages in thread
From: Jani Nikula @ 2016-09-20 8:14 UTC (permalink / raw)
To: James Bottomley, Thorsten Leemhuis, Zanoni, Paulo R, dri-devel,
intel-gfx
Cc: linux-kernel
On Mon, 19 Sep 2016, James Bottomley <James.Bottomley@HansenPartnership.com> wrote:
> On Mon, 2016-09-19 at 08:09 -0700, James Bottomley wrote:
>> On Sun, 2016-09-18 at 13:35 +0200, Thorsten Leemhuis wrote:
>> > Hi! James & Paulo: What's the current status of this?
>>
>> No, the only interaction has been the suggestion below for a revert,
>> which didn't fix the problem.
>>
>> > Was this issue discussed elsewhere or even fixed in between? Just
>> > asking, because this issue is on the list of regressions for 4.8.
>>
>>
>> I'm just about to try out -rc7, but it's not fixed so far.
>
> OK, with -rc7 and the i915 fixes, there seems to be a marked
> improvement. I can no longer crash the crtc by using lots of xrandr
> switches, which was the principal problem.
>
> I've so far only got one of these in the logs
>
> [14858.635035] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR*
> CPU pipe B FIFO underrun
>
> And the only residual problem seems to be that the monitor goes blank
> periodically, but this can be fixed by switching resolution a couple of
> times.
>
> I haven't seen any of the link training errors so far and I've run
> through my usual battery of be nasty to the external monitor tests.
Thanks for the update. We still have fixes for the underruns in the
pipeline.
BR,
Jani.
--
Jani Nikula, Intel Open Source Technology Center
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Intel-gfx] Skylake graphics regression: projector failure with 4.8-rc3
@ 2016-09-20 8:14 ` Jani Nikula
0 siblings, 0 replies; 17+ messages in thread
From: Jani Nikula @ 2016-09-20 8:14 UTC (permalink / raw)
To: James Bottomley, Thorsten Leemhuis, Zanoni, Paulo R, dri-devel,
intel-gfx
Cc: linux-kernel
On Mon, 19 Sep 2016, James Bottomley <James.Bottomley@HansenPartnership.com> wrote:
> On Mon, 2016-09-19 at 08:09 -0700, James Bottomley wrote:
>> On Sun, 2016-09-18 at 13:35 +0200, Thorsten Leemhuis wrote:
>> > Hi! James & Paulo: What's the current status of this?
>>
>> No, the only interaction has been the suggestion below for a revert,
>> which didn't fix the problem.
>>
>> > Was this issue discussed elsewhere or even fixed in between? Just
>> > asking, because this issue is on the list of regressions for 4.8.
>>
>>
>> I'm just about to try out -rc7, but it's not fixed so far.
>
> OK, with -rc7 and the i915 fixes, there seems to be a marked
> improvement. I can no longer crash the crtc by using lots of xrandr
> switches, which was the principal problem.
>
> I've so far only got one of these in the logs
>
> [14858.635035] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR*
> CPU pipe B FIFO underrun
>
> And the only residual problem seems to be that the monitor goes blank
> periodically, but this can be fixed by switching resolution a couple of
> times.
>
> I haven't seen any of the link training errors so far and I've run
> through my usual battery of be nasty to the external monitor tests.
Thanks for the update. We still have fixes for the underruns in the
pipeline.
BR,
Jani.
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2016-09-20 8:14 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-08-26 13:10 Skylake graphics regression: projector failure with 4.8-rc3 James Bottomley
2016-08-26 13:10 ` James Bottomley
2016-08-26 13:11 ` James Bottomley
2016-08-31 18:23 ` James Bottomley
2016-08-31 18:23 ` James Bottomley
2016-08-31 21:43 ` James Bottomley
2016-08-31 21:43 ` James Bottomley
2016-08-31 21:51 ` [Intel-gfx] " Zanoni, Paulo R
2016-08-31 21:51 ` Zanoni, Paulo R
2016-08-31 22:25 ` [Intel-gfx] " James Bottomley
2016-08-31 22:25 ` James Bottomley
2016-09-18 11:35 ` Thorsten Leemhuis
2016-09-19 15:09 ` James Bottomley
2016-09-19 19:27 ` James Bottomley
2016-09-19 19:27 ` James Bottomley
2016-09-20 8:14 ` [Intel-gfx] " Jani Nikula
2016-09-20 8:14 ` Jani Nikula
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.