From: Mahoda Ratnayaka <Mahoda.Ratnayaka@alliedtelesis.co.nz> To: Guenter Roeck <linux@roeck-us.net> Cc: Jean Delvare <jdelvare@suse.com>, "linux-hwmon@vger.kernel.org" <linux-hwmon@vger.kernel.org>, Chris Packham <Chris.Packham@alliedtelesis.co.nz>, "devicetree@vger.kernel.org" <devicetree@vger.kernel.org> Subject: Re: [PATCH] hwmon: (lm87) Add channel data from the dts file. Date: Wed, 7 Sep 2016 00:17:01 +0000 [thread overview] Message-ID: <1473207421452.19824@alliedtelesis.co.nz> (raw) In-Reply-To: <20160906172040.GA18235@roeck-us.net> Thanks Guenter for the comments, I'll first update the lm87 Documentation to include the device tree information and then I'll update the documentation with my proposed update along with the updated patch for reading the property in the driver. Thanks, Mahoda ________________________________________ From: linux-hwmon-owner@vger.kernel.org <linux-hwmon-owner@vger.kernel.org> on behalf of Guenter Roeck <linux@roeck-us.net> Sent: Wednesday, 7 September 2016 5:20 a.m. To: Mahoda Ratnayaka Cc: Jean Delvare; linux-hwmon@vger.kernel.org; Chris Packham Subject: Re: [PATCH] hwmon: (lm87) Add channel data from the dts file. On Mon, Sep 05, 2016 at 05:36:14PM +1200, Mahoda Ratnayaka wrote: > Currently there is no method for setting the channel > value from the DTS file. When, the driver uses a dts > file to initialize the driver platform_data is not set. > As a the result channel variable may not be set correctly. > > Without the channel variable set correctly, some of the > sensors will not be initialized correctly. For example > temp3 sensor sysfs entries. > > This adds the required functionality to set the channel > variable from the DTS file. This is done via reading the > reading a property named "channel" from the lm87 driver. > Devicetree properties need to be documented and approved by devicetree maintainers. > Signed-off-by: Mahoda Ratnayaka <mahoda.ratnayaka@alliedtelesis.co.nz> > --- > drivers/hwmon/lm87.c | 13 ++++++++++++- > 1 file changed, 12 insertions(+), 1 deletion(-) > > diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c > index a5e2958..ac0018b 100644 > --- a/drivers/hwmon/lm87.c > +++ b/drivers/hwmon/lm87.c > @@ -858,14 +858,25 @@ static void lm87_remove_files(struct i2c_client *client) > static void lm87_init_client(struct i2c_client *client) > { > struct lm87_data *data = i2c_get_clientdata(client); > + struct device_node *np = NULL; > + const char *channel = NULL; > + u8 val; > > - if (dev_get_platdata(&client->dev)) { > + np = client->dev.of_node; > + > + /* Use value read from the dts file to setup channel value. */ Isn't that obvious from the code ? > + if (np && of_property_read_u8(np, "channels", &val) == 0) { When using a function, you need to include the file declaring it, in this case linux/of.h. of_property_read_u8( )already checks for np == NULL, so there is no need to check it here. Instead of "== 0", please use "!". > + data->channel = val; > + lm87_write_value(client, > + LM87_REG_CHANNEL_MODE, data->channel); > + } else if (dev_get_platdata(&client->dev)) { > data->channel = *(u8 *)dev_get_platdata(&client->dev); > lm87_write_value(client, > LM87_REG_CHANNEL_MODE, data->channel); > } else { > data->channel = lm87_read_value(client, LM87_REG_CHANNEL_MODE); > } > + Please no unnecessary whitespace changes. > data->config = lm87_read_value(client, LM87_REG_CONFIG) & 0x6F; > > if (!(data->config & 0x01)) { > -- > 2.9.3 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Mahoda Ratnayaka <Mahoda.Ratnayaka-6g8wRflRTwXFdCa3tKVlE6U/zSkkHjvu@public.gmane.org> To: Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org> Cc: Jean Delvare <jdelvare-IBi9RG/b67k@public.gmane.org>, "linux-hwmon-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" <linux-hwmon-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>, Chris Packham <Chris.Packham-6g8wRflRTwXFdCa3tKVlE6U/zSkkHjvu@public.gmane.org>, "devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> Subject: Re: [PATCH] hwmon: (lm87) Add channel data from the dts file. Date: Wed, 7 Sep 2016 00:17:01 +0000 [thread overview] Message-ID: <1473207421452.19824@alliedtelesis.co.nz> (raw) In-Reply-To: <20160906172040.GA18235-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org> Thanks Guenter for the comments, I'll first update the lm87 Documentation to include the device tree information and then I'll update the documentation with my proposed update along with the updated patch for reading the property in the driver. Thanks, Mahoda ________________________________________ From: linux-hwmon-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org <linux-hwmon-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> on behalf of Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org> Sent: Wednesday, 7 September 2016 5:20 a.m. To: Mahoda Ratnayaka Cc: Jean Delvare; linux-hwmon-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; Chris Packham Subject: Re: [PATCH] hwmon: (lm87) Add channel data from the dts file. On Mon, Sep 05, 2016 at 05:36:14PM +1200, Mahoda Ratnayaka wrote: > Currently there is no method for setting the channel > value from the DTS file. When, the driver uses a dts > file to initialize the driver platform_data is not set. > As a the result channel variable may not be set correctly. > > Without the channel variable set correctly, some of the > sensors will not be initialized correctly. For example > temp3 sensor sysfs entries. > > This adds the required functionality to set the channel > variable from the DTS file. This is done via reading the > reading a property named "channel" from the lm87 driver. > Devicetree properties need to be documented and approved by devicetree maintainers. > Signed-off-by: Mahoda Ratnayaka <mahoda.ratnayaka-6g8wRflRTwXFdCa3tKVlE6U/zSkkHjvu@public.gmane.org> > --- > drivers/hwmon/lm87.c | 13 ++++++++++++- > 1 file changed, 12 insertions(+), 1 deletion(-) > > diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c > index a5e2958..ac0018b 100644 > --- a/drivers/hwmon/lm87.c > +++ b/drivers/hwmon/lm87.c > @@ -858,14 +858,25 @@ static void lm87_remove_files(struct i2c_client *client) > static void lm87_init_client(struct i2c_client *client) > { > struct lm87_data *data = i2c_get_clientdata(client); > + struct device_node *np = NULL; > + const char *channel = NULL; > + u8 val; > > - if (dev_get_platdata(&client->dev)) { > + np = client->dev.of_node; > + > + /* Use value read from the dts file to setup channel value. */ Isn't that obvious from the code ? > + if (np && of_property_read_u8(np, "channels", &val) == 0) { When using a function, you need to include the file declaring it, in this case linux/of.h. of_property_read_u8( )already checks for np == NULL, so there is no need to check it here. Instead of "== 0", please use "!". > + data->channel = val; > + lm87_write_value(client, > + LM87_REG_CHANNEL_MODE, data->channel); > + } else if (dev_get_platdata(&client->dev)) { > data->channel = *(u8 *)dev_get_platdata(&client->dev); > lm87_write_value(client, > LM87_REG_CHANNEL_MODE, data->channel); > } else { > data->channel = lm87_read_value(client, LM87_REG_CHANNEL_MODE); > } > + Please no unnecessary whitespace changes. > data->config = lm87_read_value(client, LM87_REG_CONFIG) & 0x6F; > > if (!(data->config & 0x01)) { > -- > 2.9.3 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in > the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-09-07 0:17 UTC|newest] Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-09-05 5:36 [PATCH] hwmon: (lm87) Add channel data from the dts file Mahoda Ratnayaka 2016-09-06 17:20 ` Guenter Roeck 2016-09-07 0:17 ` Mahoda Ratnayaka [this message] 2016-09-07 0:17 ` Mahoda Ratnayaka 2016-09-07 1:35 ` Guenter Roeck
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1473207421452.19824@alliedtelesis.co.nz \ --to=mahoda.ratnayaka@alliedtelesis.co.nz \ --cc=Chris.Packham@alliedtelesis.co.nz \ --cc=devicetree@vger.kernel.org \ --cc=jdelvare@suse.com \ --cc=linux-hwmon@vger.kernel.org \ --cc=linux@roeck-us.net \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.