* [PATCH v1 0/2] Add two automotive field Evaluation boards from rockchip
@ 2016-09-10 17:40 ` Andy Yan
0 siblings, 0 replies; 27+ messages in thread
From: Andy Yan @ 2016-09-10 17:40 UTC (permalink / raw)
To: heiko
Cc: devicetree, briannorris, afaerber, linux-kernel, robh+dt,
linux-arm-kernel, Andy Yan
Changes in v1:
- board rename
- add vendor prefix for i2c interfaced sensors
- use stdout-path to set the default console
Andy Yan (2):
ARM: dts: add rockchip PX3 Evaluation board
arm64: dts: rockchip: Add PX5 Evaluation board
Documentation/devicetree/bindings/arm/rockchip.txt | 8 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/rk3188-px3-evb.dts | 337 +++++++++++++++++++++
arch/arm64/boot/dts/rockchip/Makefile | 1 +
arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts | 304 +++++++++++++++++++
5 files changed, 651 insertions(+)
create mode 100644 arch/arm/boot/dts/rk3188-px3-evb.dts
create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
--
2.7.4
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v1 0/2] Add two automotive field Evaluation boards from rockchip
@ 2016-09-10 17:40 ` Andy Yan
0 siblings, 0 replies; 27+ messages in thread
From: Andy Yan @ 2016-09-10 17:40 UTC (permalink / raw)
To: heiko-4mtYJXux2i+zQB+pC5nmwQ
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
briannorris-F7+t8E8rja9g9hUCZPvPmw, afaerber-l3A5Bk7waGM,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Andy Yan
Changes in v1:
- board rename
- add vendor prefix for i2c interfaced sensors
- use stdout-path to set the default console
Andy Yan (2):
ARM: dts: add rockchip PX3 Evaluation board
arm64: dts: rockchip: Add PX5 Evaluation board
Documentation/devicetree/bindings/arm/rockchip.txt | 8 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/rk3188-px3-evb.dts | 337 +++++++++++++++++++++
arch/arm64/boot/dts/rockchip/Makefile | 1 +
arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts | 304 +++++++++++++++++++
5 files changed, 651 insertions(+)
create mode 100644 arch/arm/boot/dts/rk3188-px3-evb.dts
create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v1 0/2] Add two automotive field Evaluation boards from rockchip
@ 2016-09-10 17:40 ` Andy Yan
0 siblings, 0 replies; 27+ messages in thread
From: Andy Yan @ 2016-09-10 17:40 UTC (permalink / raw)
To: linux-arm-kernel
Changes in v1:
- board rename
- add vendor prefix for i2c interfaced sensors
- use stdout-path to set the default console
Andy Yan (2):
ARM: dts: add rockchip PX3 Evaluation board
arm64: dts: rockchip: Add PX5 Evaluation board
Documentation/devicetree/bindings/arm/rockchip.txt | 8 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/rk3188-px3-evb.dts | 337 +++++++++++++++++++++
arch/arm64/boot/dts/rockchip/Makefile | 1 +
arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts | 304 +++++++++++++++++++
5 files changed, 651 insertions(+)
create mode 100644 arch/arm/boot/dts/rk3188-px3-evb.dts
create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
--
2.7.4
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v1 1/2] ARM: dts: add rockchip PX3 Evaluation board
@ 2016-09-10 17:44 ` Andy Yan
0 siblings, 0 replies; 27+ messages in thread
From: Andy Yan @ 2016-09-10 17:44 UTC (permalink / raw)
To: heiko
Cc: devicetree, briannorris, afaerber, linux-kernel, robh+dt,
linux-arm-kernel, Andy Yan
PX3 EVB is designed by Rockchip for automotive field,
which intergrated with CVBS(TP2825)/MIPI DSI/LVDS/HDMI
video input/output interface, WIFI/BT/GPS(on a module
named S500 which based on MT6620), Gsensor BMA250E and
light&proximity sensor STK3410.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---
Changes in v1:
- board rename
- add vendor prefix for i2c interfaced sensors
- use stdout-path to set the default console
Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/rk3188-px3-evb.dts | 337 +++++++++++++++++++++
3 files changed, 342 insertions(+)
create mode 100644 arch/arm/boot/dts/rk3188-px3-evb.dts
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 6668645..6da3881 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -21,6 +21,10 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "radxa,rock", "rockchip,rk3188";
+- Rockchip PX3 Evaluation board:
+ Required root node properties:
+ - compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
+
- Radxa Rock2 Square board:
Required root node properties:
- compatible = "radxa,rock2-square", "rockchip,rk3288";
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index faacd52..88d27a2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -620,6 +620,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3066a-marsboard.dtb \
rk3066a-rayeager.dtb \
rk3188-radxarock.dtb \
+ rk3188-px3-evb.dtb \
rk3228-evb.dtb \
rk3229-evb.dtb \
rk3288-evb-act8846.dtb \
diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts
new file mode 100644
index 0000000..f6bc738
--- /dev/null
+++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
@@ -0,0 +1,337 @@
+/*
+ * Copyright (c) 2016 Andy Yan <andy.yan@rock-chips.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3188.dtsi"
+
+/ {
+ model = "Rockchip PX3-EVB";
+ compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x60000000 0x80000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ power {
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ label = "GPIO Key Power";
+ linux,input-type = <1>;
+ wakeup-source;
+ debounce-interval = <100>;
+ };
+ };
+
+ vcc_sys: vsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vsys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ /* Accelerometer */
+ bma250@18 {
+ compatible = "bosch,bma250";
+ reg = <0x18>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ stk3410@48 {
+ compatible = "sensortek,STK3310";
+ reg = <0x48>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+ rk808: pmic@1c {
+ compatible = "rockchip,rk818";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_io>;
+ vcc9-supply = <&vcc_io>;
+
+ regulators {
+ vdd_cpu: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-name = "vdd_arm";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd_gpu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_io";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_cif: LDO_REG1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_cif";
+ };
+
+ vcc_jetta33: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_jetta33";
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd_10";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ lvds_12: LDO_REG4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "lvds_12";
+ };
+
+ lvds_25: LDO_REG5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "lvds_25";
+ };
+
+ cif_18: LDO_REG6 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "cif_18";
+ };
+
+ vcc_sd: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ wl_18: LDO_REG8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "wl_18";
+ };
+
+ lcd_33: SWITCH_REG1 {
+ regulator-name = "lcd_33";
+ };
+ };
+ };
+
+};
+
+&i2c2 {
+ gsl1680: touchscreen@40 {
+ compatible = "silead,gsl1680";
+ reg = <0x40>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+ power-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <1280>;
+ silead,max-fingers = <5>;
+ };
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ disable-wp;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
+ status = "okay";
+};
+
+&mmc0 {
+ num-slots = <1>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+ vmmc-supply = <&vcc_sd>;
+
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&pinctrl {
+ pcfg_output_low: pcfg-output-low {
+ output-low;
+ };
+
+ usb {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ otg_vbus_drv: otg-vbus-drv {
+ rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+&usb_host {
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v1 1/2] ARM: dts: add rockchip PX3 Evaluation board
@ 2016-09-10 17:44 ` Andy Yan
0 siblings, 0 replies; 27+ messages in thread
From: Andy Yan @ 2016-09-10 17:44 UTC (permalink / raw)
To: heiko-4mtYJXux2i+zQB+pC5nmwQ
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
briannorris-F7+t8E8rja9g9hUCZPvPmw, afaerber-l3A5Bk7waGM,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Andy Yan
PX3 EVB is designed by Rockchip for automotive field,
which intergrated with CVBS(TP2825)/MIPI DSI/LVDS/HDMI
video input/output interface, WIFI/BT/GPS(on a module
named S500 which based on MT6620), Gsensor BMA250E and
light&proximity sensor STK3410.
Signed-off-by: Andy Yan <andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
Changes in v1:
- board rename
- add vendor prefix for i2c interfaced sensors
- use stdout-path to set the default console
Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/rk3188-px3-evb.dts | 337 +++++++++++++++++++++
3 files changed, 342 insertions(+)
create mode 100644 arch/arm/boot/dts/rk3188-px3-evb.dts
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 6668645..6da3881 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -21,6 +21,10 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "radxa,rock", "rockchip,rk3188";
+- Rockchip PX3 Evaluation board:
+ Required root node properties:
+ - compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
+
- Radxa Rock2 Square board:
Required root node properties:
- compatible = "radxa,rock2-square", "rockchip,rk3288";
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index faacd52..88d27a2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -620,6 +620,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3066a-marsboard.dtb \
rk3066a-rayeager.dtb \
rk3188-radxarock.dtb \
+ rk3188-px3-evb.dtb \
rk3228-evb.dtb \
rk3229-evb.dtb \
rk3288-evb-act8846.dtb \
diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts
new file mode 100644
index 0000000..f6bc738
--- /dev/null
+++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
@@ -0,0 +1,337 @@
+/*
+ * Copyright (c) 2016 Andy Yan <andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3188.dtsi"
+
+/ {
+ model = "Rockchip PX3-EVB";
+ compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x60000000 0x80000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ power {
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ label = "GPIO Key Power";
+ linux,input-type = <1>;
+ wakeup-source;
+ debounce-interval = <100>;
+ };
+ };
+
+ vcc_sys: vsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vsys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ /* Accelerometer */
+ bma250@18 {
+ compatible = "bosch,bma250";
+ reg = <0x18>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ stk3410@48 {
+ compatible = "sensortek,STK3310";
+ reg = <0x48>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+ rk808: pmic@1c {
+ compatible = "rockchip,rk818";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_io>;
+ vcc9-supply = <&vcc_io>;
+
+ regulators {
+ vdd_cpu: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-name = "vdd_arm";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd_gpu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_io";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_cif: LDO_REG1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_cif";
+ };
+
+ vcc_jetta33: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_jetta33";
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd_10";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ lvds_12: LDO_REG4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "lvds_12";
+ };
+
+ lvds_25: LDO_REG5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "lvds_25";
+ };
+
+ cif_18: LDO_REG6 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "cif_18";
+ };
+
+ vcc_sd: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ wl_18: LDO_REG8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "wl_18";
+ };
+
+ lcd_33: SWITCH_REG1 {
+ regulator-name = "lcd_33";
+ };
+ };
+ };
+
+};
+
+&i2c2 {
+ gsl1680: touchscreen@40 {
+ compatible = "silead,gsl1680";
+ reg = <0x40>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+ power-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <1280>;
+ silead,max-fingers = <5>;
+ };
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ disable-wp;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
+ status = "okay";
+};
+
+&mmc0 {
+ num-slots = <1>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+ vmmc-supply = <&vcc_sd>;
+
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&pinctrl {
+ pcfg_output_low: pcfg-output-low {
+ output-low;
+ };
+
+ usb {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ otg_vbus_drv: otg-vbus-drv {
+ rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+&usb_host {
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v1 1/2] ARM: dts: add rockchip PX3 Evaluation board
@ 2016-09-10 17:44 ` Andy Yan
0 siblings, 0 replies; 27+ messages in thread
From: Andy Yan @ 2016-09-10 17:44 UTC (permalink / raw)
To: linux-arm-kernel
PX3 EVB is designed by Rockchip for automotive field,
which intergrated with CVBS(TP2825)/MIPI DSI/LVDS/HDMI
video input/output interface, WIFI/BT/GPS(on a module
named S500 which based on MT6620), Gsensor BMA250E and
light&proximity sensor STK3410.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---
Changes in v1:
- board rename
- add vendor prefix for i2c interfaced sensors
- use stdout-path to set the default console
Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/rk3188-px3-evb.dts | 337 +++++++++++++++++++++
3 files changed, 342 insertions(+)
create mode 100644 arch/arm/boot/dts/rk3188-px3-evb.dts
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 6668645..6da3881 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -21,6 +21,10 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "radxa,rock", "rockchip,rk3188";
+- Rockchip PX3 Evaluation board:
+ Required root node properties:
+ - compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
+
- Radxa Rock2 Square board:
Required root node properties:
- compatible = "radxa,rock2-square", "rockchip,rk3288";
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index faacd52..88d27a2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -620,6 +620,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3066a-marsboard.dtb \
rk3066a-rayeager.dtb \
rk3188-radxarock.dtb \
+ rk3188-px3-evb.dtb \
rk3228-evb.dtb \
rk3229-evb.dtb \
rk3288-evb-act8846.dtb \
diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts
new file mode 100644
index 0000000..f6bc738
--- /dev/null
+++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
@@ -0,0 +1,337 @@
+/*
+ * Copyright (c) 2016 Andy Yan <andy.yan@rock-chips.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3188.dtsi"
+
+/ {
+ model = "Rockchip PX3-EVB";
+ compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x60000000 0x80000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ power {
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ label = "GPIO Key Power";
+ linux,input-type = <1>;
+ wakeup-source;
+ debounce-interval = <100>;
+ };
+ };
+
+ vcc_sys: vsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vsys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ /* Accelerometer */
+ bma250 at 18 {
+ compatible = "bosch,bma250";
+ reg = <0x18>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ stk3410 at 48 {
+ compatible = "sensortek,STK3310";
+ reg = <0x48>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+ rk808: pmic at 1c {
+ compatible = "rockchip,rk818";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_io>;
+ vcc9-supply = <&vcc_io>;
+
+ regulators {
+ vdd_cpu: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-name = "vdd_arm";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd_gpu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_io";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_cif: LDO_REG1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_cif";
+ };
+
+ vcc_jetta33: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_jetta33";
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd_10";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ lvds_12: LDO_REG4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "lvds_12";
+ };
+
+ lvds_25: LDO_REG5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "lvds_25";
+ };
+
+ cif_18: LDO_REG6 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "cif_18";
+ };
+
+ vcc_sd: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ wl_18: LDO_REG8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "wl_18";
+ };
+
+ lcd_33: SWITCH_REG1 {
+ regulator-name = "lcd_33";
+ };
+ };
+ };
+
+};
+
+&i2c2 {
+ gsl1680: touchscreen at 40 {
+ compatible = "silead,gsl1680";
+ reg = <0x40>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+ power-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <1280>;
+ silead,max-fingers = <5>;
+ };
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ disable-wp;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
+ status = "okay";
+};
+
+&mmc0 {
+ num-slots = <1>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+ vmmc-supply = <&vcc_sd>;
+
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&pinctrl {
+ pcfg_output_low: pcfg-output-low {
+ output-low;
+ };
+
+ usb {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ otg_vbus_drv: otg-vbus-drv {
+ rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+&usb_host {
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v1 2/2] arm64: dts: rockchip: Add PX5 Evaluation board
@ 2016-09-10 17:47 ` Andy Yan
0 siblings, 0 replies; 27+ messages in thread
From: Andy Yan @ 2016-09-10 17:47 UTC (permalink / raw)
To: heiko
Cc: devicetree, briannorris, afaerber, linux-kernel, robh+dt,
linux-arm-kernel, Andy Yan
PX5 EVB is designed by Rockchip for automotive field,
which intergrated with CVBS(TP2825)/MIPI DSI/CSI/LVDS
HDMI video input/output interface, audio codec ES8396,
WIFI/BT(on RTL8723BS), Gsensor BMA250E and light&proximity
sensor STK3410.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---
Changes in v1:
- board rename
- add vendor prefix for i2c interfaced devices
Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
arch/arm64/boot/dts/rockchip/Makefile | 1 +
arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts | 304 +++++++++++++++++++++
3 files changed, 309 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 6da3881..b6f92d6 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -107,6 +107,10 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "rockchip,r88", "rockchip,rk3368";
+- Rockchip PX5 Evaluation board:
+ Required root node properties:
+ - compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
+
- Rockchip RK3228 Evaluation board:
Required root node properties:
- compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 7037a16..86c74b2 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -1,6 +1,7 @@
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
always := $(dtb-y)
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
new file mode 100644
index 0000000..be0e915
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
@@ -0,0 +1,304 @@
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3368.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Rockchip PX5 EVB";
+ compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
+
+ chosen {
+ stdout-path = "serial4:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ keys: gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_key>;
+
+ power {
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ label = "GPIO Power";
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ vcc_sys: vcc-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&emmc {
+ status = "okay";
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ clock-frequency = <150000000>;
+ disable-wp;
+ keep-power-in-suspend;
+ non-removable;
+ num-slots = <1>;
+ vmmc-supply = <&vcc_io>;
+ vqmmc-supply = <&vcc18_flash>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ rockchip,system-power-controller;
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_io>;
+ vcc9-supply = <&vcc_sys>;
+ vcc10-supply = <&vcc_sys>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc_io>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ #clock-cells = <1>;
+
+ regulators {
+ vdd_cpu: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd_cpu";
+ };
+
+ vdd_log: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd_log";
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_io";
+ };
+
+ vcc18_flash: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_flash";
+ };
+
+ vcca_33: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcca_33";
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd_10";
+ };
+
+ avdd_33: LDO_REG4 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "avdd_33";
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd";
+ };
+
+ vdd10_lcd: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd10_lcd";
+ };
+
+ vcc_18: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_18";
+ };
+
+ vcc18_lcd: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_lcd";
+ };
+
+ vcc_sd: SWITCH_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_sd";
+ };
+
+ vcc33_lcd: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc33_lcd";
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ /* Accelerometer */
+ bma250@18 {
+ compatible = "bosch,bma250";
+ reg = <0x18>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ stk3410@48 {
+ compatible = "sensortek,STK3310";
+ reg = <0x48>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ gsl1680: touchscreen@40 {
+ compatible = "silead,gsl1680";
+ reg = <0x40>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+ power-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <1280>;
+ silead,max-fingers = <5>;
+ };
+};
+
+&pinctrl {
+
+ keys {
+ pwr_key: pwr-key {
+ rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_sleep: pmic-sleep {
+ rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ pmic_int: pmic-int {
+ rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&tsadc {
+ status = "okay";
+ rockchip,hw-tshut-mode = <0>; /* CRU */
+ rockchip,hw-tshut-polarity = <1>; /* high */
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v1 2/2] arm64: dts: rockchip: Add PX5 Evaluation board
@ 2016-09-10 17:47 ` Andy Yan
0 siblings, 0 replies; 27+ messages in thread
From: Andy Yan @ 2016-09-10 17:47 UTC (permalink / raw)
To: heiko-4mtYJXux2i+zQB+pC5nmwQ
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
briannorris-F7+t8E8rja9g9hUCZPvPmw, afaerber-l3A5Bk7waGM,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Andy Yan
PX5 EVB is designed by Rockchip for automotive field,
which intergrated with CVBS(TP2825)/MIPI DSI/CSI/LVDS
HDMI video input/output interface, audio codec ES8396,
WIFI/BT(on RTL8723BS), Gsensor BMA250E and light&proximity
sensor STK3410.
Signed-off-by: Andy Yan <andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
Changes in v1:
- board rename
- add vendor prefix for i2c interfaced devices
Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
arch/arm64/boot/dts/rockchip/Makefile | 1 +
arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts | 304 +++++++++++++++++++++
3 files changed, 309 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 6da3881..b6f92d6 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -107,6 +107,10 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "rockchip,r88", "rockchip,rk3368";
+- Rockchip PX5 Evaluation board:
+ Required root node properties:
+ - compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
+
- Rockchip RK3228 Evaluation board:
Required root node properties:
- compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 7037a16..86c74b2 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -1,6 +1,7 @@
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
always := $(dtb-y)
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
new file mode 100644
index 0000000..be0e915
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
@@ -0,0 +1,304 @@
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3368.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Rockchip PX5 EVB";
+ compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
+
+ chosen {
+ stdout-path = "serial4:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ keys: gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_key>;
+
+ power {
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ label = "GPIO Power";
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ vcc_sys: vcc-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&emmc {
+ status = "okay";
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ clock-frequency = <150000000>;
+ disable-wp;
+ keep-power-in-suspend;
+ non-removable;
+ num-slots = <1>;
+ vmmc-supply = <&vcc_io>;
+ vqmmc-supply = <&vcc18_flash>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ rockchip,system-power-controller;
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_io>;
+ vcc9-supply = <&vcc_sys>;
+ vcc10-supply = <&vcc_sys>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc_io>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ #clock-cells = <1>;
+
+ regulators {
+ vdd_cpu: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd_cpu";
+ };
+
+ vdd_log: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd_log";
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_io";
+ };
+
+ vcc18_flash: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_flash";
+ };
+
+ vcca_33: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcca_33";
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd_10";
+ };
+
+ avdd_33: LDO_REG4 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "avdd_33";
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd";
+ };
+
+ vdd10_lcd: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd10_lcd";
+ };
+
+ vcc_18: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_18";
+ };
+
+ vcc18_lcd: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_lcd";
+ };
+
+ vcc_sd: SWITCH_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_sd";
+ };
+
+ vcc33_lcd: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc33_lcd";
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ /* Accelerometer */
+ bma250@18 {
+ compatible = "bosch,bma250";
+ reg = <0x18>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ stk3410@48 {
+ compatible = "sensortek,STK3310";
+ reg = <0x48>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ gsl1680: touchscreen@40 {
+ compatible = "silead,gsl1680";
+ reg = <0x40>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+ power-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <1280>;
+ silead,max-fingers = <5>;
+ };
+};
+
+&pinctrl {
+
+ keys {
+ pwr_key: pwr-key {
+ rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_sleep: pmic-sleep {
+ rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ pmic_int: pmic-int {
+ rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&tsadc {
+ status = "okay";
+ rockchip,hw-tshut-mode = <0>; /* CRU */
+ rockchip,hw-tshut-polarity = <1>; /* high */
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v1 2/2] arm64: dts: rockchip: Add PX5 Evaluation board
@ 2016-09-10 17:47 ` Andy Yan
0 siblings, 0 replies; 27+ messages in thread
From: Andy Yan @ 2016-09-10 17:47 UTC (permalink / raw)
To: linux-arm-kernel
PX5 EVB is designed by Rockchip for automotive field,
which intergrated with CVBS(TP2825)/MIPI DSI/CSI/LVDS
HDMI video input/output interface, audio codec ES8396,
WIFI/BT(on RTL8723BS), Gsensor BMA250E and light&proximity
sensor STK3410.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---
Changes in v1:
- board rename
- add vendor prefix for i2c interfaced devices
Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
arch/arm64/boot/dts/rockchip/Makefile | 1 +
arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts | 304 +++++++++++++++++++++
3 files changed, 309 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 6da3881..b6f92d6 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -107,6 +107,10 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "rockchip,r88", "rockchip,rk3368";
+- Rockchip PX5 Evaluation board:
+ Required root node properties:
+ - compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
+
- Rockchip RK3228 Evaluation board:
Required root node properties:
- compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 7037a16..86c74b2 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -1,6 +1,7 @@
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
always := $(dtb-y)
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
new file mode 100644
index 0000000..be0e915
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
@@ -0,0 +1,304 @@
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3368.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Rockchip PX5 EVB";
+ compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
+
+ chosen {
+ stdout-path = "serial4:115200n8";
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ keys: gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_key>;
+
+ power {
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ label = "GPIO Power";
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ vcc_sys: vcc-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&emmc {
+ status = "okay";
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ clock-frequency = <150000000>;
+ disable-wp;
+ keep-power-in-suspend;
+ non-removable;
+ num-slots = <1>;
+ vmmc-supply = <&vcc_io>;
+ vqmmc-supply = <&vcc18_flash>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ rk808: pmic at 1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ rockchip,system-power-controller;
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_io>;
+ vcc9-supply = <&vcc_sys>;
+ vcc10-supply = <&vcc_sys>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc_io>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ #clock-cells = <1>;
+
+ regulators {
+ vdd_cpu: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd_cpu";
+ };
+
+ vdd_log: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd_log";
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_io";
+ };
+
+ vcc18_flash: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_flash";
+ };
+
+ vcca_33: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcca_33";
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd_10";
+ };
+
+ avdd_33: LDO_REG4 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "avdd_33";
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd";
+ };
+
+ vdd10_lcd: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd10_lcd";
+ };
+
+ vcc_18: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_18";
+ };
+
+ vcc18_lcd: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_lcd";
+ };
+
+ vcc_sd: SWITCH_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_sd";
+ };
+
+ vcc33_lcd: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc33_lcd";
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ /* Accelerometer */
+ bma250 at 18 {
+ compatible = "bosch,bma250";
+ reg = <0x18>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ stk3410 at 48 {
+ compatible = "sensortek,STK3310";
+ reg = <0x48>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ gsl1680: touchscreen at 40 {
+ compatible = "silead,gsl1680";
+ reg = <0x40>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+ power-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <1280>;
+ silead,max-fingers = <5>;
+ };
+};
+
+&pinctrl {
+
+ keys {
+ pwr_key: pwr-key {
+ rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_sleep: pmic-sleep {
+ rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ pmic_int: pmic-int {
+ rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&tsadc {
+ status = "okay";
+ rockchip,hw-tshut-mode = <0>; /* CRU */
+ rockchip,hw-tshut-polarity = <1>; /* high */
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [PATCH v1 1/2] ARM: dts: add rockchip PX3 Evaluation board
2016-09-10 17:44 ` Andy Yan
@ 2016-09-13 10:06 ` Andy Yan
-1 siblings, 0 replies; 27+ messages in thread
From: Andy Yan @ 2016-09-13 10:06 UTC (permalink / raw)
To: heiko
Cc: devicetree, briannorris, afaerber, linux-kernel, robh+dt,
linux-arm-kernel
Hi Heiko:
Is there any further suggestion about this series?
On 2016年09月11日 01:44, Andy Yan wrote:
> PX3 EVB is designed by Rockchip for automotive field,
> which intergrated with CVBS(TP2825)/MIPI DSI/LVDS/HDMI
> video input/output interface, WIFI/BT/GPS(on a module
> named S500 which based on MT6620), Gsensor BMA250E and
> light&proximity sensor STK3410.
>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
>
> ---
>
> Changes in v1:
> - board rename
> - add vendor prefix for i2c interfaced sensors
> - use stdout-path to set the default console
>
> Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/rk3188-px3-evb.dts | 337 +++++++++++++++++++++
> 3 files changed, 342 insertions(+)
> create mode 100644 arch/arm/boot/dts/rk3188-px3-evb.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
> index 6668645..6da3881 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.txt
> +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
> @@ -21,6 +21,10 @@ Rockchip platforms device tree bindings
> Required root node properties:
> - compatible = "radxa,rock", "rockchip,rk3188";
>
> +- Rockchip PX3 Evaluation board:
> + Required root node properties:
> + - compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
> +
> - Radxa Rock2 Square board:
> Required root node properties:
> - compatible = "radxa,rock2-square", "rockchip,rk3288";
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index faacd52..88d27a2 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -620,6 +620,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> rk3066a-marsboard.dtb \
> rk3066a-rayeager.dtb \
> rk3188-radxarock.dtb \
> + rk3188-px3-evb.dtb \
> rk3228-evb.dtb \
> rk3229-evb.dtb \
> rk3288-evb-act8846.dtb \
> diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts
> new file mode 100644
> index 0000000..f6bc738
> --- /dev/null
> +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
> @@ -0,0 +1,337 @@
> +/*
> + * Copyright (c) 2016 Andy Yan <andy.yan@rock-chips.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/input/input.h>
> +#include "rk3188.dtsi"
> +
> +/ {
> + model = "Rockchip PX3-EVB";
> + compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
> +
> + chosen {
> + stdout-path = "serial2:115200n8";
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x60000000 0x80000000>;
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + autorepeat;
> +
> + power {
> + gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_POWER>;
> + label = "GPIO Key Power";
> + linux,input-type = <1>;
> + wakeup-source;
> + debounce-interval = <100>;
> + };
> + };
> +
> + vcc_sys: vsys-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vsys";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-boot-on;
> + };
> +};
> +
> +&cpu0 {
> + cpu0-supply = <&vdd_cpu>;
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + /* Accelerometer */
> + bma250@18 {
> + compatible = "bosch,bma250";
> + reg = <0x18>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + stk3410@48 {
> + compatible = "sensortek,STK3310";
> + reg = <0x48>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> + clock-frequency = <400000>;
> + rk808: pmic@1c {
> + compatible = "rockchip,rk818";
> + reg = <0x1c>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
> + rockchip,system-power-controller;
> + wakeup-source;
> + #clock-cells = <1>;
> + clock-output-names = "xin32k", "rk808-clkout2";
> +
> + vcc1-supply = <&vcc_sys>;
> + vcc2-supply = <&vcc_sys>;
> + vcc3-supply = <&vcc_sys>;
> + vcc4-supply = <&vcc_sys>;
> + vcc6-supply = <&vcc_sys>;
> + vcc7-supply = <&vcc_sys>;
> + vcc8-supply = <&vcc_io>;
> + vcc9-supply = <&vcc_io>;
> +
> + regulators {
> + vdd_cpu: DCDC_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-name = "vdd_arm";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_gpu: DCDC_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1250000>;
> + regulator-name = "vdd_gpu";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1000000>;
> + };
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc_ddr";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc_io: DCDC_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_io";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vcc_cif: LDO_REG1 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_cif";
> + };
> +
> + vcc_jetta33: LDO_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_jetta33";
> + };
> +
> + vdd_10: LDO_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-name = "vdd_10";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1000000>;
> + };
> + };
> +
> + lvds_12: LDO_REG4 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "lvds_12";
> + };
> +
> + lvds_25: LDO_REG5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "lvds_25";
> + };
> +
> + cif_18: LDO_REG6 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-name = "cif_18";
> + };
> +
> + vcc_sd: LDO_REG7 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_sd";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + wl_18: LDO_REG8 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "wl_18";
> + };
> +
> + lcd_33: SWITCH_REG1 {
> + regulator-name = "lcd_33";
> + };
> + };
> + };
> +
> +};
> +
> +&i2c2 {
> + gsl1680: touchscreen@40 {
> + compatible = "silead,gsl1680";
> + reg = <0x40>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
> + power-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
> + touchscreen-size-x = <800>;
> + touchscreen-size-y = <1280>;
> + silead,max-fingers = <5>;
> + };
> +};
> +
> +&emmc {
> + bus-width = <8>;
> + cap-mmc-highspeed;
> + disable-wp;
> + non-removable;
> + num-slots = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
> + status = "okay";
> +};
> +
> +&mmc0 {
> + num-slots = <1>;
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
> + vmmc-supply = <&vcc_sd>;
> +
> + bus-width = <4>;
> + cap-mmc-highspeed;
> + cap-sd-highspeed;
> + disable-wp;
> +};
> +
> +&pwm1 {
> + status = "okay";
> +};
> +
> +&pwm2 {
> + status = "okay";
> +};
> +
> +&pwm3 {
> + status = "okay";
> +};
> +
> +&pinctrl {
> + pcfg_output_low: pcfg-output-low {
> + output-low;
> + };
> +
> + usb {
> + host_vbus_drv: host-vbus-drv {
> + rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + otg_vbus_drv: otg-vbus-drv {
> + rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&uart3 {
> + status = "okay";
> +};
> +
> +&usbphy {
> + status = "okay";
> +};
> +
> +&usb_host {
> + status = "okay";
> +};
> +
> +&usb_otg {
> + status = "okay";
> +};
> +
> +&wdt {
> + status = "okay";
> +};
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v1 1/2] ARM: dts: add rockchip PX3 Evaluation board
@ 2016-09-13 10:06 ` Andy Yan
0 siblings, 0 replies; 27+ messages in thread
From: Andy Yan @ 2016-09-13 10:06 UTC (permalink / raw)
To: linux-arm-kernel
Hi Heiko:
Is there any further suggestion about this series?
On 2016?09?11? 01:44, Andy Yan wrote:
> PX3 EVB is designed by Rockchip for automotive field,
> which intergrated with CVBS(TP2825)/MIPI DSI/LVDS/HDMI
> video input/output interface, WIFI/BT/GPS(on a module
> named S500 which based on MT6620), Gsensor BMA250E and
> light&proximity sensor STK3410.
>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
>
> ---
>
> Changes in v1:
> - board rename
> - add vendor prefix for i2c interfaced sensors
> - use stdout-path to set the default console
>
> Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/rk3188-px3-evb.dts | 337 +++++++++++++++++++++
> 3 files changed, 342 insertions(+)
> create mode 100644 arch/arm/boot/dts/rk3188-px3-evb.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
> index 6668645..6da3881 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.txt
> +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
> @@ -21,6 +21,10 @@ Rockchip platforms device tree bindings
> Required root node properties:
> - compatible = "radxa,rock", "rockchip,rk3188";
>
> +- Rockchip PX3 Evaluation board:
> + Required root node properties:
> + - compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
> +
> - Radxa Rock2 Square board:
> Required root node properties:
> - compatible = "radxa,rock2-square", "rockchip,rk3288";
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index faacd52..88d27a2 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -620,6 +620,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> rk3066a-marsboard.dtb \
> rk3066a-rayeager.dtb \
> rk3188-radxarock.dtb \
> + rk3188-px3-evb.dtb \
> rk3228-evb.dtb \
> rk3229-evb.dtb \
> rk3288-evb-act8846.dtb \
> diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts
> new file mode 100644
> index 0000000..f6bc738
> --- /dev/null
> +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
> @@ -0,0 +1,337 @@
> +/*
> + * Copyright (c) 2016 Andy Yan <andy.yan@rock-chips.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/input/input.h>
> +#include "rk3188.dtsi"
> +
> +/ {
> + model = "Rockchip PX3-EVB";
> + compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
> +
> + chosen {
> + stdout-path = "serial2:115200n8";
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x60000000 0x80000000>;
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + autorepeat;
> +
> + power {
> + gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_POWER>;
> + label = "GPIO Key Power";
> + linux,input-type = <1>;
> + wakeup-source;
> + debounce-interval = <100>;
> + };
> + };
> +
> + vcc_sys: vsys-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vsys";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-boot-on;
> + };
> +};
> +
> +&cpu0 {
> + cpu0-supply = <&vdd_cpu>;
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + /* Accelerometer */
> + bma250 at 18 {
> + compatible = "bosch,bma250";
> + reg = <0x18>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + stk3410 at 48 {
> + compatible = "sensortek,STK3310";
> + reg = <0x48>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> + clock-frequency = <400000>;
> + rk808: pmic at 1c {
> + compatible = "rockchip,rk818";
> + reg = <0x1c>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
> + rockchip,system-power-controller;
> + wakeup-source;
> + #clock-cells = <1>;
> + clock-output-names = "xin32k", "rk808-clkout2";
> +
> + vcc1-supply = <&vcc_sys>;
> + vcc2-supply = <&vcc_sys>;
> + vcc3-supply = <&vcc_sys>;
> + vcc4-supply = <&vcc_sys>;
> + vcc6-supply = <&vcc_sys>;
> + vcc7-supply = <&vcc_sys>;
> + vcc8-supply = <&vcc_io>;
> + vcc9-supply = <&vcc_io>;
> +
> + regulators {
> + vdd_cpu: DCDC_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-name = "vdd_arm";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_gpu: DCDC_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1250000>;
> + regulator-name = "vdd_gpu";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1000000>;
> + };
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc_ddr";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc_io: DCDC_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_io";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vcc_cif: LDO_REG1 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_cif";
> + };
> +
> + vcc_jetta33: LDO_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_jetta33";
> + };
> +
> + vdd_10: LDO_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-name = "vdd_10";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1000000>;
> + };
> + };
> +
> + lvds_12: LDO_REG4 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "lvds_12";
> + };
> +
> + lvds_25: LDO_REG5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "lvds_25";
> + };
> +
> + cif_18: LDO_REG6 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-name = "cif_18";
> + };
> +
> + vcc_sd: LDO_REG7 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_sd";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + wl_18: LDO_REG8 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "wl_18";
> + };
> +
> + lcd_33: SWITCH_REG1 {
> + regulator-name = "lcd_33";
> + };
> + };
> + };
> +
> +};
> +
> +&i2c2 {
> + gsl1680: touchscreen at 40 {
> + compatible = "silead,gsl1680";
> + reg = <0x40>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
> + power-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
> + touchscreen-size-x = <800>;
> + touchscreen-size-y = <1280>;
> + silead,max-fingers = <5>;
> + };
> +};
> +
> +&emmc {
> + bus-width = <8>;
> + cap-mmc-highspeed;
> + disable-wp;
> + non-removable;
> + num-slots = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
> + status = "okay";
> +};
> +
> +&mmc0 {
> + num-slots = <1>;
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
> + vmmc-supply = <&vcc_sd>;
> +
> + bus-width = <4>;
> + cap-mmc-highspeed;
> + cap-sd-highspeed;
> + disable-wp;
> +};
> +
> +&pwm1 {
> + status = "okay";
> +};
> +
> +&pwm2 {
> + status = "okay";
> +};
> +
> +&pwm3 {
> + status = "okay";
> +};
> +
> +&pinctrl {
> + pcfg_output_low: pcfg-output-low {
> + output-low;
> + };
> +
> + usb {
> + host_vbus_drv: host-vbus-drv {
> + rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + otg_vbus_drv: otg-vbus-drv {
> + rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&uart3 {
> + status = "okay";
> +};
> +
> +&usbphy {
> + status = "okay";
> +};
> +
> +&usb_host {
> + status = "okay";
> +};
> +
> +&usb_otg {
> + status = "okay";
> +};
> +
> +&wdt {
> + status = "okay";
> +};
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v1 1/2] ARM: dts: add rockchip PX3 Evaluation board
@ 2016-09-13 11:04 ` Heiko Stuebner
0 siblings, 0 replies; 27+ messages in thread
From: Heiko Stuebner @ 2016-09-13 11:04 UTC (permalink / raw)
To: Andy Yan
Cc: devicetree, briannorris, afaerber, linux-kernel, robh+dt,
linux-arm-kernel
Hi Andy,
Am Dienstag, 13. September 2016, 18:06:12 CEST schrieb Andy Yan:
> Hi Heiko:
>
> Is there any further suggestion about this series?
nope, all fine. I've now applied both patches, after moving some minor stuff
around (alphabetical ordering etc). While it is in branches targeted at 4.9 it
may very well only make it into 4.10.
I've also dropped the stk3310 i2c node from both until the binding is figured
out and moved the px3 board binding to the px5 patch, so that we can sort
entries correctly but don't produce merge conflicts.
If you have time, please give it a final look:
https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/commit/?id=a55e2f1b7423ab8b1c3fefbac7ae752e8a4b7edc
https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/commit/?id=d42f818e056116237ac8b6a3f72e5bfc38681589
Heiko
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v1 1/2] ARM: dts: add rockchip PX3 Evaluation board
@ 2016-09-13 11:04 ` Heiko Stuebner
0 siblings, 0 replies; 27+ messages in thread
From: Heiko Stuebner @ 2016-09-13 11:04 UTC (permalink / raw)
To: Andy Yan
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
briannorris-F7+t8E8rja9g9hUCZPvPmw, afaerber-l3A5Bk7waGM,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Hi Andy,
Am Dienstag, 13. September 2016, 18:06:12 CEST schrieb Andy Yan:
> Hi Heiko:
>
> Is there any further suggestion about this series?
nope, all fine. I've now applied both patches, after moving some minor stuff
around (alphabetical ordering etc). While it is in branches targeted at 4.9 it
may very well only make it into 4.10.
I've also dropped the stk3310 i2c node from both until the binding is figured
out and moved the px3 board binding to the px5 patch, so that we can sort
entries correctly but don't produce merge conflicts.
If you have time, please give it a final look:
https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/commit/?id=a55e2f1b7423ab8b1c3fefbac7ae752e8a4b7edc
https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/commit/?id=d42f818e056116237ac8b6a3f72e5bfc38681589
Heiko
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v1 1/2] ARM: dts: add rockchip PX3 Evaluation board
@ 2016-09-13 11:04 ` Heiko Stuebner
0 siblings, 0 replies; 27+ messages in thread
From: Heiko Stuebner @ 2016-09-13 11:04 UTC (permalink / raw)
To: linux-arm-kernel
Hi Andy,
Am Dienstag, 13. September 2016, 18:06:12 CEST schrieb Andy Yan:
> Hi Heiko:
>
> Is there any further suggestion about this series?
nope, all fine. I've now applied both patches, after moving some minor stuff
around (alphabetical ordering etc). While it is in branches targeted at 4.9 it
may very well only make it into 4.10.
I've also dropped the stk3310 i2c node from both until the binding is figured
out and moved the px3 board binding to the px5 patch, so that we can sort
entries correctly but don't produce merge conflicts.
If you have time, please give it a final look:
https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/commit/?id=a55e2f1b7423ab8b1c3fefbac7ae752e8a4b7edc
https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/commit/?id=d42f818e056116237ac8b6a3f72e5bfc38681589
Heiko
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v1 1/2] ARM: dts: add rockchip PX3 Evaluation board
2016-09-10 17:44 ` Andy Yan
@ 2016-09-13 12:14 ` Andreas Färber
-1 siblings, 0 replies; 27+ messages in thread
From: Andreas Färber @ 2016-09-13 12:14 UTC (permalink / raw)
To: Andy Yan
Cc: heiko, devicetree, briannorris, linux-kernel, robh+dt,
linux-arm-kernel, linux-rockchip
Hi Andy,
This patch didn't make it to linux-rockchip list somehow...
Not sure why I'm CC'ed, I don't have access to such a board to check, so
just a couple formal nitpicks:
Am 10.09.2016 um 19:44 schrieb Andy Yan:
> PX3 EVB is designed by Rockchip for automotive field,
> which intergrated with CVBS(TP2825)/MIPI DSI/LVDS/HDMI
"integrated"
but the grammar is somewhat incorrect with "which" referring to field -
I assume you meant "with integrated CVBS..."?
> video input/output interface, WIFI/BT/GPS(on a module
Also please always leave a space before an opening parenthesis in
English text. Similarly above, spaces around "/" would help recognize
that MIPI DSI belongs together rather than being two lists.
If nothing else applies below then maybe Heiko can edit it for you?
> named S500 which based on MT6620), Gsensor BMA250E and
> light&proximity sensor STK3410.
>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
>
> ---
>
> Changes in v1:
> - board rename
> - add vendor prefix for i2c interfaced sensors
> - use stdout-path to set the default console
>
> Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/rk3188-px3-evb.dts | 337 +++++++++++++++++++++
> 3 files changed, 342 insertions(+)
> create mode 100644 arch/arm/boot/dts/rk3188-px3-evb.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
> index 6668645..6da3881 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.txt
> +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
> @@ -21,6 +21,10 @@ Rockchip platforms device tree bindings
> Required root node properties:
> - compatible = "radxa,rock", "rockchip,rk3188";
>
> +- Rockchip PX3 Evaluation board:
> + Required root node properties:
> + - compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
How compatible is PX3 with RK3188? It is a separate SoC product:
http://www.rock-chips.com/a/en/products/rkpower/2015/1125/730.html
Wondering whether or not to drop the third compatible string.
> +
> - Radxa Rock2 Square board:
> Required root node properties:
> - compatible = "radxa,rock2-square", "rockchip,rk3288";
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index faacd52..88d27a2 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -620,6 +620,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> rk3066a-marsboard.dtb \
> rk3066a-rayeager.dtb \
> rk3188-radxarock.dtb \
> + rk3188-px3-evb.dtb \
Affects file naming as well: px3-evb.dtb?
> rk3228-evb.dtb \
> rk3229-evb.dtb \
> rk3288-evb-act8846.dtb \
> diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts
> new file mode 100644
> index 0000000..f6bc738
> --- /dev/null
> +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
> @@ -0,0 +1,337 @@
> +/*
> + * Copyright (c) 2016 Andy Yan <andy.yan@rock-chips.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/input/input.h>
> +#include "rk3188.dtsi"
I'm surprised there is no [rk3188-]px3.dtsi here! Surely some automotive
vendor may design their own board with it and should have at least the
two trailing compatible strings pre-set.
> +
> +/ {
> + model = "Rockchip PX3-EVB";
> + compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
> +
> + chosen {
> + stdout-path = "serial2:115200n8";
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x60000000 0x80000000>;
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + autorepeat;
> +
> + power {
> + gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_POWER>;
> + label = "GPIO Key Power";
> + linux,input-type = <1>;
> + wakeup-source;
> + debounce-interval = <100>;
> + };
> + };
> +
> + vcc_sys: vsys-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vsys";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-boot-on;
> + };
> +};
> +
> +&cpu0 {
> + cpu0-supply = <&vdd_cpu>;
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + /* Accelerometer */
Space after tab intentional?
> + bma250@18 {
> + compatible = "bosch,bma250";
> + reg = <0x18>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + stk3410@48 {
> + compatible = "sensortek,STK3310";
> + reg = <0x48>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
> + };
Generally it is undesired to repeat the compatible name as node name -
did you compare other .dts files? (e.g., accelerometer@18 would be
self-documenting) If this is a copy from an existing .dts then please
ignore this comment.
> +};
> +
> +&i2c1 {
> + status = "okay";
> + clock-frequency = <400000>;
Insert white line?
> + rk808: pmic@1c {
> + compatible = "rockchip,rk818";
> + reg = <0x1c>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
> + rockchip,system-power-controller;
> + wakeup-source;
> + #clock-cells = <1>;
> + clock-output-names = "xin32k", "rk808-clkout2";
> +
> + vcc1-supply = <&vcc_sys>;
> + vcc2-supply = <&vcc_sys>;
> + vcc3-supply = <&vcc_sys>;
> + vcc4-supply = <&vcc_sys>;
> + vcc6-supply = <&vcc_sys>;
> + vcc7-supply = <&vcc_sys>;
> + vcc8-supply = <&vcc_io>;
> + vcc9-supply = <&vcc_io>;
> +
> + regulators {
> + vdd_cpu: DCDC_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-name = "vdd_arm";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_gpu: DCDC_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1250000>;
> + regulator-name = "vdd_gpu";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1000000>;
> + };
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc_ddr";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc_io: DCDC_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_io";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vcc_cif: LDO_REG1 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_cif";
> + };
> +
> + vcc_jetta33: LDO_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_jetta33";
> + };
> +
> + vdd_10: LDO_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-name = "vdd_10";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1000000>;
> + };
> + };
> +
> + lvds_12: LDO_REG4 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "lvds_12";
> + };
> +
> + lvds_25: LDO_REG5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "lvds_25";
> + };
> +
> + cif_18: LDO_REG6 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-name = "cif_18";
> + };
> +
> + vcc_sd: LDO_REG7 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_sd";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + wl_18: LDO_REG8 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "wl_18";
> + };
> +
> + lcd_33: SWITCH_REG1 {
> + regulator-name = "lcd_33";
> + };
> + };
> + };
> +
> +};
> +
> +&i2c2 {
> + gsl1680: touchscreen@40 {
> + compatible = "silead,gsl1680";
> + reg = <0x40>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
> + power-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
> + touchscreen-size-x = <800>;
> + touchscreen-size-y = <1280>;
> + silead,max-fingers = <5>;
> + };
> +};
> +
> +&emmc {
> + bus-width = <8>;
> + cap-mmc-highspeed;
> + disable-wp;
> + non-removable;
> + num-slots = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
> + status = "okay";
> +};
> +
> +&mmc0 {
> + num-slots = <1>;
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
> + vmmc-supply = <&vcc_sd>;
> +
> + bus-width = <4>;
> + cap-mmc-highspeed;
> + cap-sd-highspeed;
> + disable-wp;
> +};
> +
> +&pwm1 {
> + status = "okay";
> +};
> +
> +&pwm2 {
> + status = "okay";
> +};
> +
> +&pwm3 {
> + status = "okay";
> +};
> +
> +&pinctrl {
> + pcfg_output_low: pcfg-output-low {
> + output-low;
> + };
> +
> + usb {
> + host_vbus_drv: host-vbus-drv {
> + rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + otg_vbus_drv: otg-vbus-drv {
> + rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&uart3 {
> + status = "okay";
> +};
> +
> +&usbphy {
> + status = "okay";
> +};
> +
> +&usb_host {
> + status = "okay";
> +};
> +
> +&usb_otg {
> + status = "okay";
> +};
> +
> +&wdt {
> + status = "okay";
> +};
Otherwise formally looks fine.
Cheers,
Andreas
--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v1 1/2] ARM: dts: add rockchip PX3 Evaluation board
@ 2016-09-13 12:14 ` Andreas Färber
0 siblings, 0 replies; 27+ messages in thread
From: Andreas Färber @ 2016-09-13 12:14 UTC (permalink / raw)
To: linux-arm-kernel
Hi Andy,
This patch didn't make it to linux-rockchip list somehow...
Not sure why I'm CC'ed, I don't have access to such a board to check, so
just a couple formal nitpicks:
Am 10.09.2016 um 19:44 schrieb Andy Yan:
> PX3 EVB is designed by Rockchip for automotive field,
> which intergrated with CVBS(TP2825)/MIPI DSI/LVDS/HDMI
"integrated"
but the grammar is somewhat incorrect with "which" referring to field -
I assume you meant "with integrated CVBS..."?
> video input/output interface, WIFI/BT/GPS(on a module
Also please always leave a space before an opening parenthesis in
English text. Similarly above, spaces around "/" would help recognize
that MIPI DSI belongs together rather than being two lists.
If nothing else applies below then maybe Heiko can edit it for you?
> named S500 which based on MT6620), Gsensor BMA250E and
> light&proximity sensor STK3410.
>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
>
> ---
>
> Changes in v1:
> - board rename
> - add vendor prefix for i2c interfaced sensors
> - use stdout-path to set the default console
>
> Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/rk3188-px3-evb.dts | 337 +++++++++++++++++++++
> 3 files changed, 342 insertions(+)
> create mode 100644 arch/arm/boot/dts/rk3188-px3-evb.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
> index 6668645..6da3881 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.txt
> +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
> @@ -21,6 +21,10 @@ Rockchip platforms device tree bindings
> Required root node properties:
> - compatible = "radxa,rock", "rockchip,rk3188";
>
> +- Rockchip PX3 Evaluation board:
> + Required root node properties:
> + - compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
How compatible is PX3 with RK3188? It is a separate SoC product:
http://www.rock-chips.com/a/en/products/rkpower/2015/1125/730.html
Wondering whether or not to drop the third compatible string.
> +
> - Radxa Rock2 Square board:
> Required root node properties:
> - compatible = "radxa,rock2-square", "rockchip,rk3288";
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index faacd52..88d27a2 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -620,6 +620,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> rk3066a-marsboard.dtb \
> rk3066a-rayeager.dtb \
> rk3188-radxarock.dtb \
> + rk3188-px3-evb.dtb \
Affects file naming as well: px3-evb.dtb?
> rk3228-evb.dtb \
> rk3229-evb.dtb \
> rk3288-evb-act8846.dtb \
> diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts
> new file mode 100644
> index 0000000..f6bc738
> --- /dev/null
> +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
> @@ -0,0 +1,337 @@
> +/*
> + * Copyright (c) 2016 Andy Yan <andy.yan@rock-chips.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/input/input.h>
> +#include "rk3188.dtsi"
I'm surprised there is no [rk3188-]px3.dtsi here! Surely some automotive
vendor may design their own board with it and should have at least the
two trailing compatible strings pre-set.
> +
> +/ {
> + model = "Rockchip PX3-EVB";
> + compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
> +
> + chosen {
> + stdout-path = "serial2:115200n8";
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x60000000 0x80000000>;
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + autorepeat;
> +
> + power {
> + gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_POWER>;
> + label = "GPIO Key Power";
> + linux,input-type = <1>;
> + wakeup-source;
> + debounce-interval = <100>;
> + };
> + };
> +
> + vcc_sys: vsys-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vsys";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-boot-on;
> + };
> +};
> +
> +&cpu0 {
> + cpu0-supply = <&vdd_cpu>;
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + /* Accelerometer */
Space after tab intentional?
> + bma250 at 18 {
> + compatible = "bosch,bma250";
> + reg = <0x18>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + stk3410 at 48 {
> + compatible = "sensortek,STK3310";
> + reg = <0x48>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
> + };
Generally it is undesired to repeat the compatible name as node name -
did you compare other .dts files? (e.g., accelerometer at 18 would be
self-documenting) If this is a copy from an existing .dts then please
ignore this comment.
> +};
> +
> +&i2c1 {
> + status = "okay";
> + clock-frequency = <400000>;
Insert white line?
> + rk808: pmic at 1c {
> + compatible = "rockchip,rk818";
> + reg = <0x1c>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
> + rockchip,system-power-controller;
> + wakeup-source;
> + #clock-cells = <1>;
> + clock-output-names = "xin32k", "rk808-clkout2";
> +
> + vcc1-supply = <&vcc_sys>;
> + vcc2-supply = <&vcc_sys>;
> + vcc3-supply = <&vcc_sys>;
> + vcc4-supply = <&vcc_sys>;
> + vcc6-supply = <&vcc_sys>;
> + vcc7-supply = <&vcc_sys>;
> + vcc8-supply = <&vcc_io>;
> + vcc9-supply = <&vcc_io>;
> +
> + regulators {
> + vdd_cpu: DCDC_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-name = "vdd_arm";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_gpu: DCDC_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1250000>;
> + regulator-name = "vdd_gpu";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1000000>;
> + };
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc_ddr";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc_io: DCDC_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_io";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vcc_cif: LDO_REG1 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_cif";
> + };
> +
> + vcc_jetta33: LDO_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_jetta33";
> + };
> +
> + vdd_10: LDO_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-name = "vdd_10";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1000000>;
> + };
> + };
> +
> + lvds_12: LDO_REG4 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "lvds_12";
> + };
> +
> + lvds_25: LDO_REG5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "lvds_25";
> + };
> +
> + cif_18: LDO_REG6 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-name = "cif_18";
> + };
> +
> + vcc_sd: LDO_REG7 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_sd";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + wl_18: LDO_REG8 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "wl_18";
> + };
> +
> + lcd_33: SWITCH_REG1 {
> + regulator-name = "lcd_33";
> + };
> + };
> + };
> +
> +};
> +
> +&i2c2 {
> + gsl1680: touchscreen at 40 {
> + compatible = "silead,gsl1680";
> + reg = <0x40>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
> + power-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
> + touchscreen-size-x = <800>;
> + touchscreen-size-y = <1280>;
> + silead,max-fingers = <5>;
> + };
> +};
> +
> +&emmc {
> + bus-width = <8>;
> + cap-mmc-highspeed;
> + disable-wp;
> + non-removable;
> + num-slots = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
> + status = "okay";
> +};
> +
> +&mmc0 {
> + num-slots = <1>;
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
> + vmmc-supply = <&vcc_sd>;
> +
> + bus-width = <4>;
> + cap-mmc-highspeed;
> + cap-sd-highspeed;
> + disable-wp;
> +};
> +
> +&pwm1 {
> + status = "okay";
> +};
> +
> +&pwm2 {
> + status = "okay";
> +};
> +
> +&pwm3 {
> + status = "okay";
> +};
> +
> +&pinctrl {
> + pcfg_output_low: pcfg-output-low {
> + output-low;
> + };
> +
> + usb {
> + host_vbus_drv: host-vbus-drv {
> + rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + otg_vbus_drv: otg-vbus-drv {
> + rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&uart3 {
> + status = "okay";
> +};
> +
> +&usbphy {
> + status = "okay";
> +};
> +
> +&usb_host {
> + status = "okay";
> +};
> +
> +&usb_otg {
> + status = "okay";
> +};
> +
> +&wdt {
> + status = "okay";
> +};
Otherwise formally looks fine.
Cheers,
Andreas
--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Felix Imend?rffer, Jane Smithard, Graham Norton
HRB 21284 (AG N?rnberg)
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v1 2/2] arm64: dts: rockchip: Add PX5 Evaluation board
@ 2016-09-13 12:23 ` Andreas Färber
0 siblings, 0 replies; 27+ messages in thread
From: Andreas Färber @ 2016-09-13 12:23 UTC (permalink / raw)
To: Andy Yan
Cc: heiko, devicetree, briannorris, linux-kernel, robh+dt,
linux-arm-kernel, linux-rockchip
Hi,
Am 10.09.2016 um 19:47 schrieb Andy Yan:
> PX5 EVB is designed by Rockchip for automotive field,
> which intergrated with CVBS(TP2825)/MIPI DSI/CSI/LVDS
> HDMI video input/output interface, audio codec ES8396,
> WIFI/BT(on RTL8723BS), Gsensor BMA250E and light&proximity
> sensor STK3410.
>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Most comments from PX3 1/2 apply here, too.
> ---
>
> Changes in v1:
> - board rename
> - add vendor prefix for i2c interfaced devices
>
> Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts | 304 +++++++++++++++++++++
> 3 files changed, 309 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
> index 6da3881..b6f92d6 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.txt
> +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
> @@ -107,6 +107,10 @@ Rockchip platforms device tree bindings
> Required root node properties:
> - compatible = "rockchip,r88", "rockchip,rk3368";
>
> +- Rockchip PX5 Evaluation board:
> + Required root node properties:
> + - compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
> +
> - Rockchip RK3228 Evaluation board:
> Required root node properties:
> - compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 7037a16..86c74b2 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -1,6 +1,7 @@
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
There is no PX5 listed on your English website (yet), but given that you
have your own rockchip/ folder for arm64 I would encourage you to rename
to px5-evb.dtb independent of any internal heritage or compatibility the
SoC has. Compare apq/ipq/msm in qcom.
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
>
> always := $(dtb-y)
> diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
> new file mode 100644
> index 0000000..be0e915
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
> @@ -0,0 +1,304 @@
> +/*
> + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "rk3368.dtsi"
Similarly suggest a px5.dtsi here.
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> + model = "Rockchip PX5 EVB";
> + compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
> +
> + chosen {
> + stdout-path = "serial4:115200n8";
> + };
> +
> + memory@0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x80000000>;
> + };
> +
> + keys: gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pwr_key>;
> +
> + power {
> + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
> + label = "GPIO Power";
> + linux,code = <KEY_POWER>;
> + wakeup-source;
> + };
> + };
> +
> + vcc_sys: vcc-sys-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_sys";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +};
> +
> +&emmc {
> + status = "okay";
> + bus-width = <8>;
> + cap-mmc-highspeed;
> + clock-frequency = <150000000>;
> + disable-wp;
> + keep-power-in-suspend;
> + non-removable;
> + num-slots = <1>;
> + vmmc-supply = <&vcc_io>;
> + vqmmc-supply = <&vcc18_flash>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + rk808: pmic@1b {
> + compatible = "rockchip,rk808";
> + reg = <0x1b>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
> + rockchip,system-power-controller;
> + vcc1-supply = <&vcc_sys>;
> + vcc2-supply = <&vcc_sys>;
> + vcc3-supply = <&vcc_sys>;
> + vcc4-supply = <&vcc_sys>;
> + vcc6-supply = <&vcc_sys>;
> + vcc7-supply = <&vcc_sys>;
> + vcc8-supply = <&vcc_io>;
> + vcc9-supply = <&vcc_sys>;
> + vcc10-supply = <&vcc_sys>;
> + vcc11-supply = <&vcc_sys>;
> + vcc12-supply = <&vcc_io>;
> + clock-output-names = "xin32k", "rk808-clkout2";
> + #clock-cells = <1>;
> +
> + regulators {
> + vdd_cpu: DCDC_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-name = "vdd_cpu";
> + };
> +
> + vdd_log: DCDC_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-name = "vdd_log";
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc_ddr";
> + };
> +
> + vcc_io: DCDC_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_io";
> + };
> +
> + vcc18_flash: LDO_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc18_flash";
> + };
> +
> + vcca_33: LDO_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcca_33";
> + };
> +
> + vdd_10: LDO_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-name = "vdd_10";
> + };
> +
> + avdd_33: LDO_REG4 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "avdd_33";
> + };
> +
> + vccio_sd: LDO_REG5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vccio_sd";
> + };
> +
> + vdd10_lcd: LDO_REG6 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-name = "vdd10_lcd";
> + };
> +
> + vcc_18: LDO_REG7 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc_18";
> + };
> +
> + vcc18_lcd: LDO_REG8 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc18_lcd";
> + };
> +
> + vcc_sd: SWITCH_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc_sd";
> + };
> +
> + vcc33_lcd: SWITCH_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc33_lcd";
> + };
> + };
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> +
> + /* Accelerometer */
> + bma250@18 {
> + compatible = "bosch,bma250";
> + reg = <0x18>;
> + interrupt-parent = <&gpio2>;
> + interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + stk3410@48 {
> + compatible = "sensortek,STK3310";
> + reg = <0x48>;
> + interrupt-parent = <&gpio2>;
> + interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
> + };
> +};
> +
> +&i2c2 {
> + status = "okay";
> +
> + gsl1680: touchscreen@40 {
> + compatible = "silead,gsl1680";
> + reg = <0x40>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
> + power-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
> + touchscreen-size-x = <800>;
> + touchscreen-size-y = <1280>;
> + silead,max-fingers = <5>;
> + };
> +};
> +
> +&pinctrl {
> +
Drop white line?
> + keys {
> + pwr_key: pwr-key {
> + rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + pmic {
> + pmic_sleep: pmic-sleep {
> + rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
> + };
> +
> + pmic_int: pmic-int {
> + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +};
> +
> +&tsadc {
> + status = "okay";
> + rockchip,hw-tshut-mode = <0>; /* CRU */
> + rockchip,hw-tshut-polarity = <1>; /* high */
> +};
> +
> +&uart4 {
> + status = "okay";
> +};
> +
> +&usb_host0_ehci {
> + status = "okay";
> +};
> +
> +&usb_otg {
> + status = "okay";
> +};
> +
> +&wdt {
> + status = "okay";
> +};
Otherwise formally looks fine.
Cheers,
Andreas
--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v1 2/2] arm64: dts: rockchip: Add PX5 Evaluation board
@ 2016-09-13 12:23 ` Andreas Färber
0 siblings, 0 replies; 27+ messages in thread
From: Andreas Färber @ 2016-09-13 12:23 UTC (permalink / raw)
To: Andy Yan
Cc: heiko-4mtYJXux2i+zQB+pC5nmwQ, devicetree-u79uwXL29TY76Z2rM5mHXA,
briannorris-F7+t8E8rja9g9hUCZPvPmw,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-rockchip
Hi,
Am 10.09.2016 um 19:47 schrieb Andy Yan:
> PX5 EVB is designed by Rockchip for automotive field,
> which intergrated with CVBS(TP2825)/MIPI DSI/CSI/LVDS
> HDMI video input/output interface, audio codec ES8396,
> WIFI/BT(on RTL8723BS), Gsensor BMA250E and light&proximity
> sensor STK3410.
>
> Signed-off-by: Andy Yan <andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Most comments from PX3 1/2 apply here, too.
> ---
>
> Changes in v1:
> - board rename
> - add vendor prefix for i2c interfaced devices
>
> Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts | 304 +++++++++++++++++++++
> 3 files changed, 309 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
> index 6da3881..b6f92d6 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.txt
> +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
> @@ -107,6 +107,10 @@ Rockchip platforms device tree bindings
> Required root node properties:
> - compatible = "rockchip,r88", "rockchip,rk3368";
>
> +- Rockchip PX5 Evaluation board:
> + Required root node properties:
> + - compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
> +
> - Rockchip RK3228 Evaluation board:
> Required root node properties:
> - compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 7037a16..86c74b2 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -1,6 +1,7 @@
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
There is no PX5 listed on your English website (yet), but given that you
have your own rockchip/ folder for arm64 I would encourage you to rename
to px5-evb.dtb independent of any internal heritage or compatibility the
SoC has. Compare apq/ipq/msm in qcom.
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
>
> always := $(dtb-y)
> diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
> new file mode 100644
> index 0000000..be0e915
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
> @@ -0,0 +1,304 @@
> +/*
> + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "rk3368.dtsi"
Similarly suggest a px5.dtsi here.
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> + model = "Rockchip PX5 EVB";
> + compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
> +
> + chosen {
> + stdout-path = "serial4:115200n8";
> + };
> +
> + memory@0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x80000000>;
> + };
> +
> + keys: gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pwr_key>;
> +
> + power {
> + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
> + label = "GPIO Power";
> + linux,code = <KEY_POWER>;
> + wakeup-source;
> + };
> + };
> +
> + vcc_sys: vcc-sys-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_sys";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +};
> +
> +&emmc {
> + status = "okay";
> + bus-width = <8>;
> + cap-mmc-highspeed;
> + clock-frequency = <150000000>;
> + disable-wp;
> + keep-power-in-suspend;
> + non-removable;
> + num-slots = <1>;
> + vmmc-supply = <&vcc_io>;
> + vqmmc-supply = <&vcc18_flash>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + rk808: pmic@1b {
> + compatible = "rockchip,rk808";
> + reg = <0x1b>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
> + rockchip,system-power-controller;
> + vcc1-supply = <&vcc_sys>;
> + vcc2-supply = <&vcc_sys>;
> + vcc3-supply = <&vcc_sys>;
> + vcc4-supply = <&vcc_sys>;
> + vcc6-supply = <&vcc_sys>;
> + vcc7-supply = <&vcc_sys>;
> + vcc8-supply = <&vcc_io>;
> + vcc9-supply = <&vcc_sys>;
> + vcc10-supply = <&vcc_sys>;
> + vcc11-supply = <&vcc_sys>;
> + vcc12-supply = <&vcc_io>;
> + clock-output-names = "xin32k", "rk808-clkout2";
> + #clock-cells = <1>;
> +
> + regulators {
> + vdd_cpu: DCDC_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-name = "vdd_cpu";
> + };
> +
> + vdd_log: DCDC_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-name = "vdd_log";
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc_ddr";
> + };
> +
> + vcc_io: DCDC_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_io";
> + };
> +
> + vcc18_flash: LDO_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc18_flash";
> + };
> +
> + vcca_33: LDO_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcca_33";
> + };
> +
> + vdd_10: LDO_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-name = "vdd_10";
> + };
> +
> + avdd_33: LDO_REG4 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "avdd_33";
> + };
> +
> + vccio_sd: LDO_REG5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vccio_sd";
> + };
> +
> + vdd10_lcd: LDO_REG6 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-name = "vdd10_lcd";
> + };
> +
> + vcc_18: LDO_REG7 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc_18";
> + };
> +
> + vcc18_lcd: LDO_REG8 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc18_lcd";
> + };
> +
> + vcc_sd: SWITCH_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc_sd";
> + };
> +
> + vcc33_lcd: SWITCH_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc33_lcd";
> + };
> + };
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> +
> + /* Accelerometer */
> + bma250@18 {
> + compatible = "bosch,bma250";
> + reg = <0x18>;
> + interrupt-parent = <&gpio2>;
> + interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + stk3410@48 {
> + compatible = "sensortek,STK3310";
> + reg = <0x48>;
> + interrupt-parent = <&gpio2>;
> + interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
> + };
> +};
> +
> +&i2c2 {
> + status = "okay";
> +
> + gsl1680: touchscreen@40 {
> + compatible = "silead,gsl1680";
> + reg = <0x40>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
> + power-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
> + touchscreen-size-x = <800>;
> + touchscreen-size-y = <1280>;
> + silead,max-fingers = <5>;
> + };
> +};
> +
> +&pinctrl {
> +
Drop white line?
> + keys {
> + pwr_key: pwr-key {
> + rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + pmic {
> + pmic_sleep: pmic-sleep {
> + rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
> + };
> +
> + pmic_int: pmic-int {
> + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +};
> +
> +&tsadc {
> + status = "okay";
> + rockchip,hw-tshut-mode = <0>; /* CRU */
> + rockchip,hw-tshut-polarity = <1>; /* high */
> +};
> +
> +&uart4 {
> + status = "okay";
> +};
> +
> +&usb_host0_ehci {
> + status = "okay";
> +};
> +
> +&usb_otg {
> + status = "okay";
> +};
> +
> +&wdt {
> + status = "okay";
> +};
Otherwise formally looks fine.
Cheers,
Andreas
--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v1 2/2] arm64: dts: rockchip: Add PX5 Evaluation board
@ 2016-09-13 12:23 ` Andreas Färber
0 siblings, 0 replies; 27+ messages in thread
From: Andreas Färber @ 2016-09-13 12:23 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
Am 10.09.2016 um 19:47 schrieb Andy Yan:
> PX5 EVB is designed by Rockchip for automotive field,
> which intergrated with CVBS(TP2825)/MIPI DSI/CSI/LVDS
> HDMI video input/output interface, audio codec ES8396,
> WIFI/BT(on RTL8723BS), Gsensor BMA250E and light&proximity
> sensor STK3410.
>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Most comments from PX3 1/2 apply here, too.
> ---
>
> Changes in v1:
> - board rename
> - add vendor prefix for i2c interfaced devices
>
> Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts | 304 +++++++++++++++++++++
> 3 files changed, 309 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
> index 6da3881..b6f92d6 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.txt
> +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
> @@ -107,6 +107,10 @@ Rockchip platforms device tree bindings
> Required root node properties:
> - compatible = "rockchip,r88", "rockchip,rk3368";
>
> +- Rockchip PX5 Evaluation board:
> + Required root node properties:
> + - compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
> +
> - Rockchip RK3228 Evaluation board:
> Required root node properties:
> - compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 7037a16..86c74b2 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -1,6 +1,7 @@
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
There is no PX5 listed on your English website (yet), but given that you
have your own rockchip/ folder for arm64 I would encourage you to rename
to px5-evb.dtb independent of any internal heritage or compatibility the
SoC has. Compare apq/ipq/msm in qcom.
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
>
> always := $(dtb-y)
> diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
> new file mode 100644
> index 0000000..be0e915
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
> @@ -0,0 +1,304 @@
> +/*
> + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "rk3368.dtsi"
Similarly suggest a px5.dtsi here.
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> + model = "Rockchip PX5 EVB";
> + compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
> +
> + chosen {
> + stdout-path = "serial4:115200n8";
> + };
> +
> + memory at 0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x80000000>;
> + };
> +
> + keys: gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pwr_key>;
> +
> + power {
> + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
> + label = "GPIO Power";
> + linux,code = <KEY_POWER>;
> + wakeup-source;
> + };
> + };
> +
> + vcc_sys: vcc-sys-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_sys";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +};
> +
> +&emmc {
> + status = "okay";
> + bus-width = <8>;
> + cap-mmc-highspeed;
> + clock-frequency = <150000000>;
> + disable-wp;
> + keep-power-in-suspend;
> + non-removable;
> + num-slots = <1>;
> + vmmc-supply = <&vcc_io>;
> + vqmmc-supply = <&vcc18_flash>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + rk808: pmic at 1b {
> + compatible = "rockchip,rk808";
> + reg = <0x1b>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
> + rockchip,system-power-controller;
> + vcc1-supply = <&vcc_sys>;
> + vcc2-supply = <&vcc_sys>;
> + vcc3-supply = <&vcc_sys>;
> + vcc4-supply = <&vcc_sys>;
> + vcc6-supply = <&vcc_sys>;
> + vcc7-supply = <&vcc_sys>;
> + vcc8-supply = <&vcc_io>;
> + vcc9-supply = <&vcc_sys>;
> + vcc10-supply = <&vcc_sys>;
> + vcc11-supply = <&vcc_sys>;
> + vcc12-supply = <&vcc_io>;
> + clock-output-names = "xin32k", "rk808-clkout2";
> + #clock-cells = <1>;
> +
> + regulators {
> + vdd_cpu: DCDC_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-name = "vdd_cpu";
> + };
> +
> + vdd_log: DCDC_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-name = "vdd_log";
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc_ddr";
> + };
> +
> + vcc_io: DCDC_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_io";
> + };
> +
> + vcc18_flash: LDO_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc18_flash";
> + };
> +
> + vcca_33: LDO_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcca_33";
> + };
> +
> + vdd_10: LDO_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-name = "vdd_10";
> + };
> +
> + avdd_33: LDO_REG4 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "avdd_33";
> + };
> +
> + vccio_sd: LDO_REG5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vccio_sd";
> + };
> +
> + vdd10_lcd: LDO_REG6 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-name = "vdd10_lcd";
> + };
> +
> + vcc_18: LDO_REG7 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc_18";
> + };
> +
> + vcc18_lcd: LDO_REG8 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc18_lcd";
> + };
> +
> + vcc_sd: SWITCH_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc_sd";
> + };
> +
> + vcc33_lcd: SWITCH_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc33_lcd";
> + };
> + };
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> +
> + /* Accelerometer */
> + bma250 at 18 {
> + compatible = "bosch,bma250";
> + reg = <0x18>;
> + interrupt-parent = <&gpio2>;
> + interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + stk3410 at 48 {
> + compatible = "sensortek,STK3310";
> + reg = <0x48>;
> + interrupt-parent = <&gpio2>;
> + interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
> + };
> +};
> +
> +&i2c2 {
> + status = "okay";
> +
> + gsl1680: touchscreen at 40 {
> + compatible = "silead,gsl1680";
> + reg = <0x40>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
> + power-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
> + touchscreen-size-x = <800>;
> + touchscreen-size-y = <1280>;
> + silead,max-fingers = <5>;
> + };
> +};
> +
> +&pinctrl {
> +
Drop white line?
> + keys {
> + pwr_key: pwr-key {
> + rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + pmic {
> + pmic_sleep: pmic-sleep {
> + rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
> + };
> +
> + pmic_int: pmic-int {
> + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +};
> +
> +&tsadc {
> + status = "okay";
> + rockchip,hw-tshut-mode = <0>; /* CRU */
> + rockchip,hw-tshut-polarity = <1>; /* high */
> +};
> +
> +&uart4 {
> + status = "okay";
> +};
> +
> +&usb_host0_ehci {
> + status = "okay";
> +};
> +
> +&usb_otg {
> + status = "okay";
> +};
> +
> +&wdt {
> + status = "okay";
> +};
Otherwise formally looks fine.
Cheers,
Andreas
--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Felix Imend?rffer, Jane Smithard, Graham Norton
HRB 21284 (AG N?rnberg)
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v1 1/2] ARM: dts: add rockchip PX3 Evaluation board
@ 2016-10-10 9:54 ` Heiko Stuebner
0 siblings, 0 replies; 27+ messages in thread
From: Heiko Stuebner @ 2016-10-10 9:54 UTC (permalink / raw)
To: Andreas Färber
Cc: Andy Yan, devicetree, briannorris, linux-kernel, robh+dt,
linux-arm-kernel, linux-rockchip
Hi Andreas, Andy,
Am Dienstag, 13. September 2016, 14:14:01 CEST schrieb Andreas Färber:
> Hi Andy,
>
> This patch didn't make it to linux-rockchip list somehow...
> Not sure why I'm CC'ed, I don't have access to such a board to check, so
> just a couple formal nitpicks:
>
> Am 10.09.2016 um 19:44 schrieb Andy Yan:
> > PX3 EVB is designed by Rockchip for automotive field,
> > which intergrated with CVBS(TP2825)/MIPI DSI/LVDS/HDMI
>
> "integrated"
> but the grammar is somewhat incorrect with "which" referring to field -
> I assume you meant "with integrated CVBS..."?
>
> > video input/output interface, WIFI/BT/GPS(on a module
>
> Also please always leave a space before an opening parenthesis in
> English text. Similarly above, spaces around "/" would help recognize
> that MIPI DSI belongs together rather than being two lists.
>
> If nothing else applies below then maybe Heiko can edit it for you?
I've fixed the remarks in the commit description.
> > named S500 which based on MT6620), Gsensor BMA250E and
> > light&proximity sensor STK3410.
> >
> > Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> >
> > ---
> >
> > Changes in v1:
> > - board rename
> > - add vendor prefix for i2c interfaced sensors
> > - use stdout-path to set the default console
> >
> > Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
> > arch/arm/boot/dts/Makefile | 1 +
> > arch/arm/boot/dts/rk3188-px3-evb.dts | 337
> > +++++++++++++++++++++ 3 files changed, 342 insertions(+)
> > create mode 100644 arch/arm/boot/dts/rk3188-px3-evb.dts
> >
> > diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt
> > b/Documentation/devicetree/bindings/arm/rockchip.txt index
> > 6668645..6da3881 100644
> > --- a/Documentation/devicetree/bindings/arm/rockchip.txt
> > +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
> > @@ -21,6 +21,10 @@ Rockchip platforms device tree bindings
> >
> > Required root node properties:
> > - compatible = "radxa,rock", "rockchip,rk3188";
> >
> > +- Rockchip PX3 Evaluation board:
> > + Required root node properties:
> > + - compatible = "rockchip,px3-evb", "rockchip,px3",
> > "rockchip,rk3188";
> How compatible is PX3 with RK3188? It is a separate SoC product:
>
> http://www.rock-chips.com/a/en/products/rkpower/2015/1125/730.html
>
> Wondering whether or not to drop the third compatible string.
As discussed in IRC (and with arm-soc maintainers), I intend to keep the
rk3188 part, as the chip really is just a (hardened?) variant of the consumer
rk3188, but shares the same internals with the original.
> > +
> >
> > - Radxa Rock2 Square board:
> > Required root node properties:
> > - compatible = "radxa,rock2-square", "rockchip,rk3288";
> >
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index faacd52..88d27a2 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -620,6 +620,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> >
> > rk3066a-marsboard.dtb \
> > rk3066a-rayeager.dtb \
> > rk3188-radxarock.dtb \
> >
> > + rk3188-px3-evb.dtb \
>
> Affects file naming as well: px3-evb.dtb?
see above
>
> > rk3228-evb.dtb \
> > rk3229-evb.dtb \
> > rk3288-evb-act8846.dtb \
> >
> > diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts
> > b/arch/arm/boot/dts/rk3188-px3-evb.dts new file mode 100644
> > index 0000000..f6bc738
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
> > @@ -0,0 +1,337 @@
> > +/*
> > + * Copyright (c) 2016 Andy Yan <andy.yan@rock-chips.com>
> > + *
> > + * This file is dual-licensed: you can use it either under the terms
> > + * of the GPL or the X11 license, at your option. Note that this dual
> > + * licensing only applies to this file, and not this project as a
> > + * whole.
> > + *
> > + * a) This file is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of the
> > + * License, or (at your option) any later version.
> > + *
> > + * This file is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * Or, alternatively,
> > + *
> > + * b) Permission is hereby granted, free of charge, to any person
> > + * obtaining a copy of this software and associated documentation
> > + * files (the "Software"), to deal in the Software without
> > + * restriction, including without limitation the rights to use,
> > + * copy, modify, merge, publish, distribute, sublicense, and/or
> > + * sell copies of the Software, and to permit persons to whom the
> > + * Software is furnished to do so, subject to the following
> > + * conditions:
> > + *
> > + * The above copyright notice and this permission notice shall be
> > + * included in all copies or substantial portions of the Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> > + * OTHER DEALINGS IN THE SOFTWARE.
> > + */
> > +
> > +/dts-v1/;
> > +#include <dt-bindings/input/input.h>
> > +#include "rk3188.dtsi"
>
> I'm surprised there is no [rk3188-]px3.dtsi here! Surely some automotive
> vendor may design their own board with it and should have at least the
> two trailing compatible strings pre-set.
see above. I don't think there is a need to pollute the directory with
(nearly) empty dtsi files, especially as the compatible will get overwritten by
a board compatible anyway.
>
> > +
> > +/ {
> > + model = "Rockchip PX3-EVB";
> > + compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
> > +
> > + chosen {
> > + stdout-path = "serial2:115200n8";
> > + };
> > +
> > + memory {
> > + device_type = "memory";
> > + reg = <0x60000000 0x80000000>;
> > + };
> > +
> > + gpio-keys {
> > + compatible = "gpio-keys";
> > + autorepeat;
> > +
> > + power {
> > + gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
> > + linux,code = <KEY_POWER>;
> > + label = "GPIO Key Power";
> > + linux,input-type = <1>;
> > + wakeup-source;
> > + debounce-interval = <100>;
> > + };
> > + };
> > +
> > + vcc_sys: vsys-regulator {
> > + compatible = "regulator-fixed";
> > + regulator-name = "vsys";
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5000000>;
> > + regulator-boot-on;
> > + };
> > +};
> > +
> > +&cpu0 {
> > + cpu0-supply = <&vdd_cpu>;
> > +};
> > +
> > +&i2c0 {
> > + status = "okay";
> > +
> > + /* Accelerometer */
>
> Space after tab intentional?
>
> > + bma250@18 {
> > + compatible = "bosch,bma250";
> > + reg = <0x18>;
> > + interrupt-parent = <&gpio0>;
> > + interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
> > + };
> > +
> > + stk3410@48 {
> > + compatible = "sensortek,STK3310";
> > + reg = <0x48>;
> > + interrupt-parent = <&gpio1>;
> > + interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
> > + };
>
> Generally it is undesired to repeat the compatible name as node name -
> did you compare other .dts files? (e.g., accelerometer@18 would be
> self-documenting) If this is a copy from an existing .dts then please
> ignore this comment.
due to the compatible ambiguity, I had dropped the stk3410 node anyway.
I've also checked how the bma250 gets specified and there are both variants in
use (accelerometer@ and bmc250@). So to set a good example for the future,
I've changed the node name to accelerometer@18 and dropped the now self
explanatory comment obove it.
>
> > +};
> > +
> > +&i2c1 {
> > + status = "okay";
> > + clock-frequency = <400000>;
>
> Insert white line?
done
Heiko
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v1 1/2] ARM: dts: add rockchip PX3 Evaluation board
@ 2016-10-10 9:54 ` Heiko Stuebner
0 siblings, 0 replies; 27+ messages in thread
From: Heiko Stuebner @ 2016-10-10 9:54 UTC (permalink / raw)
To: Andreas Färber
Cc: Andy Yan, devicetree-u79uwXL29TY76Z2rM5mHXA,
briannorris-F7+t8E8rja9g9hUCZPvPmw,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-rockchip
Hi Andreas, Andy,
Am Dienstag, 13. September 2016, 14:14:01 CEST schrieb Andreas Färber:
> Hi Andy,
>
> This patch didn't make it to linux-rockchip list somehow...
> Not sure why I'm CC'ed, I don't have access to such a board to check, so
> just a couple formal nitpicks:
>
> Am 10.09.2016 um 19:44 schrieb Andy Yan:
> > PX3 EVB is designed by Rockchip for automotive field,
> > which intergrated with CVBS(TP2825)/MIPI DSI/LVDS/HDMI
>
> "integrated"
> but the grammar is somewhat incorrect with "which" referring to field -
> I assume you meant "with integrated CVBS..."?
>
> > video input/output interface, WIFI/BT/GPS(on a module
>
> Also please always leave a space before an opening parenthesis in
> English text. Similarly above, spaces around "/" would help recognize
> that MIPI DSI belongs together rather than being two lists.
>
> If nothing else applies below then maybe Heiko can edit it for you?
I've fixed the remarks in the commit description.
> > named S500 which based on MT6620), Gsensor BMA250E and
> > light&proximity sensor STK3410.
> >
> > Signed-off-by: Andy Yan <andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> >
> > ---
> >
> > Changes in v1:
> > - board rename
> > - add vendor prefix for i2c interfaced sensors
> > - use stdout-path to set the default console
> >
> > Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
> > arch/arm/boot/dts/Makefile | 1 +
> > arch/arm/boot/dts/rk3188-px3-evb.dts | 337
> > +++++++++++++++++++++ 3 files changed, 342 insertions(+)
> > create mode 100644 arch/arm/boot/dts/rk3188-px3-evb.dts
> >
> > diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt
> > b/Documentation/devicetree/bindings/arm/rockchip.txt index
> > 6668645..6da3881 100644
> > --- a/Documentation/devicetree/bindings/arm/rockchip.txt
> > +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
> > @@ -21,6 +21,10 @@ Rockchip platforms device tree bindings
> >
> > Required root node properties:
> > - compatible = "radxa,rock", "rockchip,rk3188";
> >
> > +- Rockchip PX3 Evaluation board:
> > + Required root node properties:
> > + - compatible = "rockchip,px3-evb", "rockchip,px3",
> > "rockchip,rk3188";
> How compatible is PX3 with RK3188? It is a separate SoC product:
>
> http://www.rock-chips.com/a/en/products/rkpower/2015/1125/730.html
>
> Wondering whether or not to drop the third compatible string.
As discussed in IRC (and with arm-soc maintainers), I intend to keep the
rk3188 part, as the chip really is just a (hardened?) variant of the consumer
rk3188, but shares the same internals with the original.
> > +
> >
> > - Radxa Rock2 Square board:
> > Required root node properties:
> > - compatible = "radxa,rock2-square", "rockchip,rk3288";
> >
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index faacd52..88d27a2 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -620,6 +620,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> >
> > rk3066a-marsboard.dtb \
> > rk3066a-rayeager.dtb \
> > rk3188-radxarock.dtb \
> >
> > + rk3188-px3-evb.dtb \
>
> Affects file naming as well: px3-evb.dtb?
see above
>
> > rk3228-evb.dtb \
> > rk3229-evb.dtb \
> > rk3288-evb-act8846.dtb \
> >
> > diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts
> > b/arch/arm/boot/dts/rk3188-px3-evb.dts new file mode 100644
> > index 0000000..f6bc738
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
> > @@ -0,0 +1,337 @@
> > +/*
> > + * Copyright (c) 2016 Andy Yan <andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> > + *
> > + * This file is dual-licensed: you can use it either under the terms
> > + * of the GPL or the X11 license, at your option. Note that this dual
> > + * licensing only applies to this file, and not this project as a
> > + * whole.
> > + *
> > + * a) This file is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of the
> > + * License, or (at your option) any later version.
> > + *
> > + * This file is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * Or, alternatively,
> > + *
> > + * b) Permission is hereby granted, free of charge, to any person
> > + * obtaining a copy of this software and associated documentation
> > + * files (the "Software"), to deal in the Software without
> > + * restriction, including without limitation the rights to use,
> > + * copy, modify, merge, publish, distribute, sublicense, and/or
> > + * sell copies of the Software, and to permit persons to whom the
> > + * Software is furnished to do so, subject to the following
> > + * conditions:
> > + *
> > + * The above copyright notice and this permission notice shall be
> > + * included in all copies or substantial portions of the Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> > + * OTHER DEALINGS IN THE SOFTWARE.
> > + */
> > +
> > +/dts-v1/;
> > +#include <dt-bindings/input/input.h>
> > +#include "rk3188.dtsi"
>
> I'm surprised there is no [rk3188-]px3.dtsi here! Surely some automotive
> vendor may design their own board with it and should have at least the
> two trailing compatible strings pre-set.
see above. I don't think there is a need to pollute the directory with
(nearly) empty dtsi files, especially as the compatible will get overwritten by
a board compatible anyway.
>
> > +
> > +/ {
> > + model = "Rockchip PX3-EVB";
> > + compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
> > +
> > + chosen {
> > + stdout-path = "serial2:115200n8";
> > + };
> > +
> > + memory {
> > + device_type = "memory";
> > + reg = <0x60000000 0x80000000>;
> > + };
> > +
> > + gpio-keys {
> > + compatible = "gpio-keys";
> > + autorepeat;
> > +
> > + power {
> > + gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
> > + linux,code = <KEY_POWER>;
> > + label = "GPIO Key Power";
> > + linux,input-type = <1>;
> > + wakeup-source;
> > + debounce-interval = <100>;
> > + };
> > + };
> > +
> > + vcc_sys: vsys-regulator {
> > + compatible = "regulator-fixed";
> > + regulator-name = "vsys";
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5000000>;
> > + regulator-boot-on;
> > + };
> > +};
> > +
> > +&cpu0 {
> > + cpu0-supply = <&vdd_cpu>;
> > +};
> > +
> > +&i2c0 {
> > + status = "okay";
> > +
> > + /* Accelerometer */
>
> Space after tab intentional?
>
> > + bma250@18 {
> > + compatible = "bosch,bma250";
> > + reg = <0x18>;
> > + interrupt-parent = <&gpio0>;
> > + interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
> > + };
> > +
> > + stk3410@48 {
> > + compatible = "sensortek,STK3310";
> > + reg = <0x48>;
> > + interrupt-parent = <&gpio1>;
> > + interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
> > + };
>
> Generally it is undesired to repeat the compatible name as node name -
> did you compare other .dts files? (e.g., accelerometer@18 would be
> self-documenting) If this is a copy from an existing .dts then please
> ignore this comment.
due to the compatible ambiguity, I had dropped the stk3410 node anyway.
I've also checked how the bma250 gets specified and there are both variants in
use (accelerometer@ and bmc250@). So to set a good example for the future,
I've changed the node name to accelerometer@18 and dropped the now self
explanatory comment obove it.
>
> > +};
> > +
> > +&i2c1 {
> > + status = "okay";
> > + clock-frequency = <400000>;
>
> Insert white line?
done
Heiko
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v1 1/2] ARM: dts: add rockchip PX3 Evaluation board
@ 2016-10-10 9:54 ` Heiko Stuebner
0 siblings, 0 replies; 27+ messages in thread
From: Heiko Stuebner @ 2016-10-10 9:54 UTC (permalink / raw)
To: linux-arm-kernel
Hi Andreas, Andy,
Am Dienstag, 13. September 2016, 14:14:01 CEST schrieb Andreas F?rber:
> Hi Andy,
>
> This patch didn't make it to linux-rockchip list somehow...
> Not sure why I'm CC'ed, I don't have access to such a board to check, so
> just a couple formal nitpicks:
>
> Am 10.09.2016 um 19:44 schrieb Andy Yan:
> > PX3 EVB is designed by Rockchip for automotive field,
> > which intergrated with CVBS(TP2825)/MIPI DSI/LVDS/HDMI
>
> "integrated"
> but the grammar is somewhat incorrect with "which" referring to field -
> I assume you meant "with integrated CVBS..."?
>
> > video input/output interface, WIFI/BT/GPS(on a module
>
> Also please always leave a space before an opening parenthesis in
> English text. Similarly above, spaces around "/" would help recognize
> that MIPI DSI belongs together rather than being two lists.
>
> If nothing else applies below then maybe Heiko can edit it for you?
I've fixed the remarks in the commit description.
> > named S500 which based on MT6620), Gsensor BMA250E and
> > light&proximity sensor STK3410.
> >
> > Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> >
> > ---
> >
> > Changes in v1:
> > - board rename
> > - add vendor prefix for i2c interfaced sensors
> > - use stdout-path to set the default console
> >
> > Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
> > arch/arm/boot/dts/Makefile | 1 +
> > arch/arm/boot/dts/rk3188-px3-evb.dts | 337
> > +++++++++++++++++++++ 3 files changed, 342 insertions(+)
> > create mode 100644 arch/arm/boot/dts/rk3188-px3-evb.dts
> >
> > diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt
> > b/Documentation/devicetree/bindings/arm/rockchip.txt index
> > 6668645..6da3881 100644
> > --- a/Documentation/devicetree/bindings/arm/rockchip.txt
> > +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
> > @@ -21,6 +21,10 @@ Rockchip platforms device tree bindings
> >
> > Required root node properties:
> > - compatible = "radxa,rock", "rockchip,rk3188";
> >
> > +- Rockchip PX3 Evaluation board:
> > + Required root node properties:
> > + - compatible = "rockchip,px3-evb", "rockchip,px3",
> > "rockchip,rk3188";
> How compatible is PX3 with RK3188? It is a separate SoC product:
>
> http://www.rock-chips.com/a/en/products/rkpower/2015/1125/730.html
>
> Wondering whether or not to drop the third compatible string.
As discussed in IRC (and with arm-soc maintainers), I intend to keep the
rk3188 part, as the chip really is just a (hardened?) variant of the consumer
rk3188, but shares the same internals with the original.
> > +
> >
> > - Radxa Rock2 Square board:
> > Required root node properties:
> > - compatible = "radxa,rock2-square", "rockchip,rk3288";
> >
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index faacd52..88d27a2 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -620,6 +620,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> >
> > rk3066a-marsboard.dtb \
> > rk3066a-rayeager.dtb \
> > rk3188-radxarock.dtb \
> >
> > + rk3188-px3-evb.dtb \
>
> Affects file naming as well: px3-evb.dtb?
see above
>
> > rk3228-evb.dtb \
> > rk3229-evb.dtb \
> > rk3288-evb-act8846.dtb \
> >
> > diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts
> > b/arch/arm/boot/dts/rk3188-px3-evb.dts new file mode 100644
> > index 0000000..f6bc738
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
> > @@ -0,0 +1,337 @@
> > +/*
> > + * Copyright (c) 2016 Andy Yan <andy.yan@rock-chips.com>
> > + *
> > + * This file is dual-licensed: you can use it either under the terms
> > + * of the GPL or the X11 license, at your option. Note that this dual
> > + * licensing only applies to this file, and not this project as a
> > + * whole.
> > + *
> > + * a) This file is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of the
> > + * License, or (at your option) any later version.
> > + *
> > + * This file is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * Or, alternatively,
> > + *
> > + * b) Permission is hereby granted, free of charge, to any person
> > + * obtaining a copy of this software and associated documentation
> > + * files (the "Software"), to deal in the Software without
> > + * restriction, including without limitation the rights to use,
> > + * copy, modify, merge, publish, distribute, sublicense, and/or
> > + * sell copies of the Software, and to permit persons to whom the
> > + * Software is furnished to do so, subject to the following
> > + * conditions:
> > + *
> > + * The above copyright notice and this permission notice shall be
> > + * included in all copies or substantial portions of the Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> > + * OTHER DEALINGS IN THE SOFTWARE.
> > + */
> > +
> > +/dts-v1/;
> > +#include <dt-bindings/input/input.h>
> > +#include "rk3188.dtsi"
>
> I'm surprised there is no [rk3188-]px3.dtsi here! Surely some automotive
> vendor may design their own board with it and should have at least the
> two trailing compatible strings pre-set.
see above. I don't think there is a need to pollute the directory with
(nearly) empty dtsi files, especially as the compatible will get overwritten by
a board compatible anyway.
>
> > +
> > +/ {
> > + model = "Rockchip PX3-EVB";
> > + compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
> > +
> > + chosen {
> > + stdout-path = "serial2:115200n8";
> > + };
> > +
> > + memory {
> > + device_type = "memory";
> > + reg = <0x60000000 0x80000000>;
> > + };
> > +
> > + gpio-keys {
> > + compatible = "gpio-keys";
> > + autorepeat;
> > +
> > + power {
> > + gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
> > + linux,code = <KEY_POWER>;
> > + label = "GPIO Key Power";
> > + linux,input-type = <1>;
> > + wakeup-source;
> > + debounce-interval = <100>;
> > + };
> > + };
> > +
> > + vcc_sys: vsys-regulator {
> > + compatible = "regulator-fixed";
> > + regulator-name = "vsys";
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5000000>;
> > + regulator-boot-on;
> > + };
> > +};
> > +
> > +&cpu0 {
> > + cpu0-supply = <&vdd_cpu>;
> > +};
> > +
> > +&i2c0 {
> > + status = "okay";
> > +
> > + /* Accelerometer */
>
> Space after tab intentional?
>
> > + bma250 at 18 {
> > + compatible = "bosch,bma250";
> > + reg = <0x18>;
> > + interrupt-parent = <&gpio0>;
> > + interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
> > + };
> > +
> > + stk3410 at 48 {
> > + compatible = "sensortek,STK3310";
> > + reg = <0x48>;
> > + interrupt-parent = <&gpio1>;
> > + interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
> > + };
>
> Generally it is undesired to repeat the compatible name as node name -
> did you compare other .dts files? (e.g., accelerometer at 18 would be
> self-documenting) If this is a copy from an existing .dts then please
> ignore this comment.
due to the compatible ambiguity, I had dropped the stk3410 node anyway.
I've also checked how the bma250 gets specified and there are both variants in
use (accelerometer@ and bmc250@). So to set a good example for the future,
I've changed the node name to accelerometer at 18 and dropped the now self
explanatory comment obove it.
>
> > +};
> > +
> > +&i2c1 {
> > + status = "okay";
> > + clock-frequency = <400000>;
>
> Insert white line?
done
Heiko
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v1 1/2] ARM: dts: add rockchip PX3 Evaluation board
2016-10-10 9:54 ` Heiko Stuebner
(?)
@ 2016-10-10 11:25 ` Andy Yan
-1 siblings, 0 replies; 27+ messages in thread
From: Andy Yan @ 2016-10-10 11:25 UTC (permalink / raw)
To: Heiko Stuebner, Andreas Färber
Cc: devicetree, briannorris, linux-kernel, robh+dt, linux-arm-kernel,
linux-rockchip
Hi Heiko:
On 2016年10月10日 17:54, Heiko Stuebner wrote:
> Hi Andreas, Andy,
>
> Am Dienstag, 13. September 2016, 14:14:01 CEST schrieb Andreas Färber:
>> Hi Andy,
>>
>> This patch didn't make it to linux-rockchip list somehow...
>> Not sure why I'm CC'ed, I don't have access to such a board to check, so
>> just a couple formal nitpicks:
>>
>> Am 10.09.2016 um 19:44 schrieb Andy Yan:
>>> PX3 EVB is designed by Rockchip for automotive field,
>>> which intergrated with CVBS(TP2825)/MIPI DSI/LVDS/HDMI
>> "integrated"
>> but the grammar is somewhat incorrect with "which" referring to field -
>> I assume you meant "with integrated CVBS..."?
>>
>>> video input/output interface, WIFI/BT/GPS(on a module
>> Also please always leave a space before an opening parenthesis in
>> English text. Similarly above, spaces around "/" would help recognize
>> that MIPI DSI belongs together rather than being two lists.
>>
>> If nothing else applies below then maybe Heiko can edit it for you?
> I've fixed the remarks in the commit description.
>
>
>>> named S500 which based on MT6620), Gsensor BMA250E and
>>> light&proximity sensor STK3410.
>>>
>>> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
>>>
>>> ---
>>>
>>> Changes in v1:
>>> - board rename
>>> - add vendor prefix for i2c interfaced sensors
>>> - use stdout-path to set the default console
>>>
>>> Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
>>> arch/arm/boot/dts/Makefile | 1 +
>>> arch/arm/boot/dts/rk3188-px3-evb.dts | 337
>>> +++++++++++++++++++++ 3 files changed, 342 insertions(+)
>>> create mode 100644 arch/arm/boot/dts/rk3188-px3-evb.dts
>>>
>>> diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt
>>> b/Documentation/devicetree/bindings/arm/rockchip.txt index
>>> 6668645..6da3881 100644
>>> --- a/Documentation/devicetree/bindings/arm/rockchip.txt
>>> +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
>>> @@ -21,6 +21,10 @@ Rockchip platforms device tree bindings
>>>
>>> Required root node properties:
>>> - compatible = "radxa,rock", "rockchip,rk3188";
>>>
>>> +- Rockchip PX3 Evaluation board:
>>> + Required root node properties:
>>> + - compatible = "rockchip,px3-evb", "rockchip,px3",
>>> "rockchip,rk3188";
>> How compatible is PX3 with RK3188? It is a separate SoC product:
>>
>> http://www.rock-chips.com/a/en/products/rkpower/2015/1125/730.html
>>
>> Wondering whether or not to drop the third compatible string.
> As discussed in IRC (and with arm-soc maintainers), I intend to keep the
> rk3188 part, as the chip really is just a (hardened?) variant of the consumer
> rk3188, but shares the same internals with the original.
>
>>> +
>>>
>>> - Radxa Rock2 Square board:
>>> Required root node properties:
>>> - compatible = "radxa,rock2-square", "rockchip,rk3288";
>>>
>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>> index faacd52..88d27a2 100644
>>> --- a/arch/arm/boot/dts/Makefile
>>> +++ b/arch/arm/boot/dts/Makefile
>>> @@ -620,6 +620,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
>>>
>>> rk3066a-marsboard.dtb \
>>> rk3066a-rayeager.dtb \
>>> rk3188-radxarock.dtb \
>>>
>>> + rk3188-px3-evb.dtb \
>> Affects file naming as well: px3-evb.dtb?
> see above
>
>>> rk3228-evb.dtb \
>>> rk3229-evb.dtb \
>>> rk3288-evb-act8846.dtb \
>>>
>>> diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts
>>> b/arch/arm/boot/dts/rk3188-px3-evb.dts new file mode 100644
>>> index 0000000..f6bc738
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
>>> @@ -0,0 +1,337 @@
>>> +/*
>>> + * Copyright (c) 2016 Andy Yan <andy.yan@rock-chips.com>
>>> + *
>>> + * This file is dual-licensed: you can use it either under the terms
>>> + * of the GPL or the X11 license, at your option. Note that this dual
>>> + * licensing only applies to this file, and not this project as a
>>> + * whole.
>>> + *
>>> + * a) This file is free software; you can redistribute it and/or
>>> + * modify it under the terms of the GNU General Public License as
>>> + * published by the Free Software Foundation; either version 2 of the
>>> + * License, or (at your option) any later version.
>>> + *
>>> + * This file is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + *
>>> + * Or, alternatively,
>>> + *
>>> + * b) Permission is hereby granted, free of charge, to any person
>>> + * obtaining a copy of this software and associated documentation
>>> + * files (the "Software"), to deal in the Software without
>>> + * restriction, including without limitation the rights to use,
>>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>>> + * sell copies of the Software, and to permit persons to whom the
>>> + * Software is furnished to do so, subject to the following
>>> + * conditions:
>>> + *
>>> + * The above copyright notice and this permission notice shall be
>>> + * included in all copies or substantial portions of the Software.
>>> + *
>>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>>> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>>> + * OTHER DEALINGS IN THE SOFTWARE.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +#include <dt-bindings/input/input.h>
>>> +#include "rk3188.dtsi"
>> I'm surprised there is no [rk3188-]px3.dtsi here! Surely some automotive
>> vendor may design their own board with it and should have at least the
>> two trailing compatible strings pre-set.
> see above. I don't think there is a need to pollute the directory with
> (nearly) empty dtsi files, especially as the compatible will get overwritten by
> a board compatible anyway.
>
>>> +
>>> +/ {
>>> + model = "Rockchip PX3-EVB";
>>> + compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
>>> +
>>> + chosen {
>>> + stdout-path = "serial2:115200n8";
>>> + };
>>> +
>>> + memory {
>>> + device_type = "memory";
>>> + reg = <0x60000000 0x80000000>;
>>> + };
>>> +
>>> + gpio-keys {
>>> + compatible = "gpio-keys";
>>> + autorepeat;
>>> +
>>> + power {
>>> + gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
>>> + linux,code = <KEY_POWER>;
>>> + label = "GPIO Key Power";
>>> + linux,input-type = <1>;
>>> + wakeup-source;
>>> + debounce-interval = <100>;
>>> + };
>>> + };
>>> +
>>> + vcc_sys: vsys-regulator {
>>> + compatible = "regulator-fixed";
>>> + regulator-name = "vsys";
>>> + regulator-min-microvolt = <5000000>;
>>> + regulator-max-microvolt = <5000000>;
>>> + regulator-boot-on;
>>> + };
>>> +};
>>> +
>>> +&cpu0 {
>>> + cpu0-supply = <&vdd_cpu>;
>>> +};
>>> +
>>> +&i2c0 {
>>> + status = "okay";
>>> +
>>> + /* Accelerometer */
>> Space after tab intentional?
>>
>>> + bma250@18 {
>>> + compatible = "bosch,bma250";
>>> + reg = <0x18>;
>>> + interrupt-parent = <&gpio0>;
>>> + interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
>>> + };
>>> +
>>> + stk3410@48 {
>>> + compatible = "sensortek,STK3310";
>>> + reg = <0x48>;
>>> + interrupt-parent = <&gpio1>;
>>> + interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
>>> + };
>> Generally it is undesired to repeat the compatible name as node name -
>> did you compare other .dts files? (e.g., accelerometer@18 would be
>> self-documenting) If this is a copy from an existing .dts then please
>> ignore this comment.
> due to the compatible ambiguity, I had dropped the stk3410 node anyway.
> I've also checked how the bma250 gets specified and there are both variants in
> use (accelerometer@ and bmc250@). So to set a good example for the future,
> I've changed the node name to accelerometer@18 and dropped the now self
> explanatory comment obove it.
>
>
>>> +};
>>> +
>>> +&i2c1 {
>>> + status = "okay";
>>> + clock-frequency = <400000>;
>> Insert white line?
> done
>
>
> Heiko
>
>
I have no problem with these above, Thanks for all you have done.
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v1 1/2] ARM: dts: add rockchip PX3 Evaluation board
@ 2016-10-10 11:25 ` Andy Yan
0 siblings, 0 replies; 27+ messages in thread
From: Andy Yan @ 2016-10-10 11:25 UTC (permalink / raw)
To: Heiko Stuebner, Andreas Färber
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
briannorris-F7+t8E8rja9g9hUCZPvPmw,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-rockchip
Hi Heiko:
On 2016年10月10日 17:54, Heiko Stuebner wrote:
> Hi Andreas, Andy,
>
> Am Dienstag, 13. September 2016, 14:14:01 CEST schrieb Andreas Färber:
>> Hi Andy,
>>
>> This patch didn't make it to linux-rockchip list somehow...
>> Not sure why I'm CC'ed, I don't have access to such a board to check, so
>> just a couple formal nitpicks:
>>
>> Am 10.09.2016 um 19:44 schrieb Andy Yan:
>>> PX3 EVB is designed by Rockchip for automotive field,
>>> which intergrated with CVBS(TP2825)/MIPI DSI/LVDS/HDMI
>> "integrated"
>> but the grammar is somewhat incorrect with "which" referring to field -
>> I assume you meant "with integrated CVBS..."?
>>
>>> video input/output interface, WIFI/BT/GPS(on a module
>> Also please always leave a space before an opening parenthesis in
>> English text. Similarly above, spaces around "/" would help recognize
>> that MIPI DSI belongs together rather than being two lists.
>>
>> If nothing else applies below then maybe Heiko can edit it for you?
> I've fixed the remarks in the commit description.
>
>
>>> named S500 which based on MT6620), Gsensor BMA250E and
>>> light&proximity sensor STK3410.
>>>
>>> Signed-off-by: Andy Yan <andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>>>
>>> ---
>>>
>>> Changes in v1:
>>> - board rename
>>> - add vendor prefix for i2c interfaced sensors
>>> - use stdout-path to set the default console
>>>
>>> Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
>>> arch/arm/boot/dts/Makefile | 1 +
>>> arch/arm/boot/dts/rk3188-px3-evb.dts | 337
>>> +++++++++++++++++++++ 3 files changed, 342 insertions(+)
>>> create mode 100644 arch/arm/boot/dts/rk3188-px3-evb.dts
>>>
>>> diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt
>>> b/Documentation/devicetree/bindings/arm/rockchip.txt index
>>> 6668645..6da3881 100644
>>> --- a/Documentation/devicetree/bindings/arm/rockchip.txt
>>> +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
>>> @@ -21,6 +21,10 @@ Rockchip platforms device tree bindings
>>>
>>> Required root node properties:
>>> - compatible = "radxa,rock", "rockchip,rk3188";
>>>
>>> +- Rockchip PX3 Evaluation board:
>>> + Required root node properties:
>>> + - compatible = "rockchip,px3-evb", "rockchip,px3",
>>> "rockchip,rk3188";
>> How compatible is PX3 with RK3188? It is a separate SoC product:
>>
>> http://www.rock-chips.com/a/en/products/rkpower/2015/1125/730.html
>>
>> Wondering whether or not to drop the third compatible string.
> As discussed in IRC (and with arm-soc maintainers), I intend to keep the
> rk3188 part, as the chip really is just a (hardened?) variant of the consumer
> rk3188, but shares the same internals with the original.
>
>>> +
>>>
>>> - Radxa Rock2 Square board:
>>> Required root node properties:
>>> - compatible = "radxa,rock2-square", "rockchip,rk3288";
>>>
>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>> index faacd52..88d27a2 100644
>>> --- a/arch/arm/boot/dts/Makefile
>>> +++ b/arch/arm/boot/dts/Makefile
>>> @@ -620,6 +620,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
>>>
>>> rk3066a-marsboard.dtb \
>>> rk3066a-rayeager.dtb \
>>> rk3188-radxarock.dtb \
>>>
>>> + rk3188-px3-evb.dtb \
>> Affects file naming as well: px3-evb.dtb?
> see above
>
>>> rk3228-evb.dtb \
>>> rk3229-evb.dtb \
>>> rk3288-evb-act8846.dtb \
>>>
>>> diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts
>>> b/arch/arm/boot/dts/rk3188-px3-evb.dts new file mode 100644
>>> index 0000000..f6bc738
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
>>> @@ -0,0 +1,337 @@
>>> +/*
>>> + * Copyright (c) 2016 Andy Yan <andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>>> + *
>>> + * This file is dual-licensed: you can use it either under the terms
>>> + * of the GPL or the X11 license, at your option. Note that this dual
>>> + * licensing only applies to this file, and not this project as a
>>> + * whole.
>>> + *
>>> + * a) This file is free software; you can redistribute it and/or
>>> + * modify it under the terms of the GNU General Public License as
>>> + * published by the Free Software Foundation; either version 2 of the
>>> + * License, or (at your option) any later version.
>>> + *
>>> + * This file is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + *
>>> + * Or, alternatively,
>>> + *
>>> + * b) Permission is hereby granted, free of charge, to any person
>>> + * obtaining a copy of this software and associated documentation
>>> + * files (the "Software"), to deal in the Software without
>>> + * restriction, including without limitation the rights to use,
>>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>>> + * sell copies of the Software, and to permit persons to whom the
>>> + * Software is furnished to do so, subject to the following
>>> + * conditions:
>>> + *
>>> + * The above copyright notice and this permission notice shall be
>>> + * included in all copies or substantial portions of the Software.
>>> + *
>>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>>> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>>> + * OTHER DEALINGS IN THE SOFTWARE.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +#include <dt-bindings/input/input.h>
>>> +#include "rk3188.dtsi"
>> I'm surprised there is no [rk3188-]px3.dtsi here! Surely some automotive
>> vendor may design their own board with it and should have at least the
>> two trailing compatible strings pre-set.
> see above. I don't think there is a need to pollute the directory with
> (nearly) empty dtsi files, especially as the compatible will get overwritten by
> a board compatible anyway.
>
>>> +
>>> +/ {
>>> + model = "Rockchip PX3-EVB";
>>> + compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
>>> +
>>> + chosen {
>>> + stdout-path = "serial2:115200n8";
>>> + };
>>> +
>>> + memory {
>>> + device_type = "memory";
>>> + reg = <0x60000000 0x80000000>;
>>> + };
>>> +
>>> + gpio-keys {
>>> + compatible = "gpio-keys";
>>> + autorepeat;
>>> +
>>> + power {
>>> + gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
>>> + linux,code = <KEY_POWER>;
>>> + label = "GPIO Key Power";
>>> + linux,input-type = <1>;
>>> + wakeup-source;
>>> + debounce-interval = <100>;
>>> + };
>>> + };
>>> +
>>> + vcc_sys: vsys-regulator {
>>> + compatible = "regulator-fixed";
>>> + regulator-name = "vsys";
>>> + regulator-min-microvolt = <5000000>;
>>> + regulator-max-microvolt = <5000000>;
>>> + regulator-boot-on;
>>> + };
>>> +};
>>> +
>>> +&cpu0 {
>>> + cpu0-supply = <&vdd_cpu>;
>>> +};
>>> +
>>> +&i2c0 {
>>> + status = "okay";
>>> +
>>> + /* Accelerometer */
>> Space after tab intentional?
>>
>>> + bma250@18 {
>>> + compatible = "bosch,bma250";
>>> + reg = <0x18>;
>>> + interrupt-parent = <&gpio0>;
>>> + interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
>>> + };
>>> +
>>> + stk3410@48 {
>>> + compatible = "sensortek,STK3310";
>>> + reg = <0x48>;
>>> + interrupt-parent = <&gpio1>;
>>> + interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
>>> + };
>> Generally it is undesired to repeat the compatible name as node name -
>> did you compare other .dts files? (e.g., accelerometer@18 would be
>> self-documenting) If this is a copy from an existing .dts then please
>> ignore this comment.
> due to the compatible ambiguity, I had dropped the stk3410 node anyway.
> I've also checked how the bma250 gets specified and there are both variants in
> use (accelerometer@ and bmc250@). So to set a good example for the future,
> I've changed the node name to accelerometer@18 and dropped the now self
> explanatory comment obove it.
>
>
>>> +};
>>> +
>>> +&i2c1 {
>>> + status = "okay";
>>> + clock-frequency = <400000>;
>> Insert white line?
> done
>
>
> Heiko
>
>
I have no problem with these above, Thanks for all you have done.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v1 1/2] ARM: dts: add rockchip PX3 Evaluation board
@ 2016-10-10 11:25 ` Andy Yan
0 siblings, 0 replies; 27+ messages in thread
From: Andy Yan @ 2016-10-10 11:25 UTC (permalink / raw)
To: linux-arm-kernel
Hi Heiko:
On 2016?10?10? 17:54, Heiko Stuebner wrote:
> Hi Andreas, Andy,
>
> Am Dienstag, 13. September 2016, 14:14:01 CEST schrieb Andreas F?rber:
>> Hi Andy,
>>
>> This patch didn't make it to linux-rockchip list somehow...
>> Not sure why I'm CC'ed, I don't have access to such a board to check, so
>> just a couple formal nitpicks:
>>
>> Am 10.09.2016 um 19:44 schrieb Andy Yan:
>>> PX3 EVB is designed by Rockchip for automotive field,
>>> which intergrated with CVBS(TP2825)/MIPI DSI/LVDS/HDMI
>> "integrated"
>> but the grammar is somewhat incorrect with "which" referring to field -
>> I assume you meant "with integrated CVBS..."?
>>
>>> video input/output interface, WIFI/BT/GPS(on a module
>> Also please always leave a space before an opening parenthesis in
>> English text. Similarly above, spaces around "/" would help recognize
>> that MIPI DSI belongs together rather than being two lists.
>>
>> If nothing else applies below then maybe Heiko can edit it for you?
> I've fixed the remarks in the commit description.
>
>
>>> named S500 which based on MT6620), Gsensor BMA250E and
>>> light&proximity sensor STK3410.
>>>
>>> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
>>>
>>> ---
>>>
>>> Changes in v1:
>>> - board rename
>>> - add vendor prefix for i2c interfaced sensors
>>> - use stdout-path to set the default console
>>>
>>> Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
>>> arch/arm/boot/dts/Makefile | 1 +
>>> arch/arm/boot/dts/rk3188-px3-evb.dts | 337
>>> +++++++++++++++++++++ 3 files changed, 342 insertions(+)
>>> create mode 100644 arch/arm/boot/dts/rk3188-px3-evb.dts
>>>
>>> diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt
>>> b/Documentation/devicetree/bindings/arm/rockchip.txt index
>>> 6668645..6da3881 100644
>>> --- a/Documentation/devicetree/bindings/arm/rockchip.txt
>>> +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
>>> @@ -21,6 +21,10 @@ Rockchip platforms device tree bindings
>>>
>>> Required root node properties:
>>> - compatible = "radxa,rock", "rockchip,rk3188";
>>>
>>> +- Rockchip PX3 Evaluation board:
>>> + Required root node properties:
>>> + - compatible = "rockchip,px3-evb", "rockchip,px3",
>>> "rockchip,rk3188";
>> How compatible is PX3 with RK3188? It is a separate SoC product:
>>
>> http://www.rock-chips.com/a/en/products/rkpower/2015/1125/730.html
>>
>> Wondering whether or not to drop the third compatible string.
> As discussed in IRC (and with arm-soc maintainers), I intend to keep the
> rk3188 part, as the chip really is just a (hardened?) variant of the consumer
> rk3188, but shares the same internals with the original.
>
>>> +
>>>
>>> - Radxa Rock2 Square board:
>>> Required root node properties:
>>> - compatible = "radxa,rock2-square", "rockchip,rk3288";
>>>
>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>> index faacd52..88d27a2 100644
>>> --- a/arch/arm/boot/dts/Makefile
>>> +++ b/arch/arm/boot/dts/Makefile
>>> @@ -620,6 +620,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
>>>
>>> rk3066a-marsboard.dtb \
>>> rk3066a-rayeager.dtb \
>>> rk3188-radxarock.dtb \
>>>
>>> + rk3188-px3-evb.dtb \
>> Affects file naming as well: px3-evb.dtb?
> see above
>
>>> rk3228-evb.dtb \
>>> rk3229-evb.dtb \
>>> rk3288-evb-act8846.dtb \
>>>
>>> diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts
>>> b/arch/arm/boot/dts/rk3188-px3-evb.dts new file mode 100644
>>> index 0000000..f6bc738
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
>>> @@ -0,0 +1,337 @@
>>> +/*
>>> + * Copyright (c) 2016 Andy Yan <andy.yan@rock-chips.com>
>>> + *
>>> + * This file is dual-licensed: you can use it either under the terms
>>> + * of the GPL or the X11 license, at your option. Note that this dual
>>> + * licensing only applies to this file, and not this project as a
>>> + * whole.
>>> + *
>>> + * a) This file is free software; you can redistribute it and/or
>>> + * modify it under the terms of the GNU General Public License as
>>> + * published by the Free Software Foundation; either version 2 of the
>>> + * License, or (at your option) any later version.
>>> + *
>>> + * This file is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + *
>>> + * Or, alternatively,
>>> + *
>>> + * b) Permission is hereby granted, free of charge, to any person
>>> + * obtaining a copy of this software and associated documentation
>>> + * files (the "Software"), to deal in the Software without
>>> + * restriction, including without limitation the rights to use,
>>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>>> + * sell copies of the Software, and to permit persons to whom the
>>> + * Software is furnished to do so, subject to the following
>>> + * conditions:
>>> + *
>>> + * The above copyright notice and this permission notice shall be
>>> + * included in all copies or substantial portions of the Software.
>>> + *
>>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>>> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>>> + * OTHER DEALINGS IN THE SOFTWARE.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +#include <dt-bindings/input/input.h>
>>> +#include "rk3188.dtsi"
>> I'm surprised there is no [rk3188-]px3.dtsi here! Surely some automotive
>> vendor may design their own board with it and should have at least the
>> two trailing compatible strings pre-set.
> see above. I don't think there is a need to pollute the directory with
> (nearly) empty dtsi files, especially as the compatible will get overwritten by
> a board compatible anyway.
>
>>> +
>>> +/ {
>>> + model = "Rockchip PX3-EVB";
>>> + compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
>>> +
>>> + chosen {
>>> + stdout-path = "serial2:115200n8";
>>> + };
>>> +
>>> + memory {
>>> + device_type = "memory";
>>> + reg = <0x60000000 0x80000000>;
>>> + };
>>> +
>>> + gpio-keys {
>>> + compatible = "gpio-keys";
>>> + autorepeat;
>>> +
>>> + power {
>>> + gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
>>> + linux,code = <KEY_POWER>;
>>> + label = "GPIO Key Power";
>>> + linux,input-type = <1>;
>>> + wakeup-source;
>>> + debounce-interval = <100>;
>>> + };
>>> + };
>>> +
>>> + vcc_sys: vsys-regulator {
>>> + compatible = "regulator-fixed";
>>> + regulator-name = "vsys";
>>> + regulator-min-microvolt = <5000000>;
>>> + regulator-max-microvolt = <5000000>;
>>> + regulator-boot-on;
>>> + };
>>> +};
>>> +
>>> +&cpu0 {
>>> + cpu0-supply = <&vdd_cpu>;
>>> +};
>>> +
>>> +&i2c0 {
>>> + status = "okay";
>>> +
>>> + /* Accelerometer */
>> Space after tab intentional?
>>
>>> + bma250 at 18 {
>>> + compatible = "bosch,bma250";
>>> + reg = <0x18>;
>>> + interrupt-parent = <&gpio0>;
>>> + interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
>>> + };
>>> +
>>> + stk3410 at 48 {
>>> + compatible = "sensortek,STK3310";
>>> + reg = <0x48>;
>>> + interrupt-parent = <&gpio1>;
>>> + interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
>>> + };
>> Generally it is undesired to repeat the compatible name as node name -
>> did you compare other .dts files? (e.g., accelerometer at 18 would be
>> self-documenting) If this is a copy from an existing .dts then please
>> ignore this comment.
> due to the compatible ambiguity, I had dropped the stk3410 node anyway.
> I've also checked how the bma250 gets specified and there are both variants in
> use (accelerometer@ and bmc250@). So to set a good example for the future,
> I've changed the node name to accelerometer at 18 and dropped the now self
> explanatory comment obove it.
>
>
>>> +};
>>> +
>>> +&i2c1 {
>>> + status = "okay";
>>> + clock-frequency = <400000>;
>> Insert white line?
> done
>
>
> Heiko
>
>
I have no problem with these above, Thanks for all you have done.
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v1 2/2] arm64: dts: rockchip: Add PX5 Evaluation board
2016-09-13 12:23 ` Andreas Färber
@ 2016-10-10 12:23 ` Heiko Stuebner
-1 siblings, 0 replies; 27+ messages in thread
From: Heiko Stuebner @ 2016-10-10 12:23 UTC (permalink / raw)
To: Andreas Färber
Cc: Andy Yan, devicetree, briannorris, linux-kernel, robh+dt,
linux-arm-kernel, linux-rockchip
Hi Andreas, Andy,
Am Dienstag, 13. September 2016, 14:23:35 CEST schrieb Andreas Färber:
> Hi,
>
> Am 10.09.2016 um 19:47 schrieb Andy Yan:
> > PX5 EVB is designed by Rockchip for automotive field,
> > which intergrated with CVBS(TP2825)/MIPI DSI/CSI/LVDS
> > HDMI video input/output interface, audio codec ES8396,
> > WIFI/BT(on RTL8723BS), Gsensor BMA250E and light&proximity
> > sensor STK3410.
> >
> > Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
>
> Most comments from PX3 1/2 apply here, too.
ammended te commit
> > ---
> >
> > Changes in v1:
> > - board rename
> > - add vendor prefix for i2c interfaced devices
> >
> > Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
> > arch/arm64/boot/dts/rockchip/Makefile | 1 +
> > arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts | 304
> > +++++++++++++++++++++ 3 files changed, 309 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
> >
> > diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt
> > b/Documentation/devicetree/bindings/arm/rockchip.txt index
> > 6da3881..b6f92d6 100644
> > --- a/Documentation/devicetree/bindings/arm/rockchip.txt
> > +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
> > @@ -107,6 +107,10 @@ Rockchip platforms device tree bindings
> >
> > Required root node properties:
> > - compatible = "rockchip,r88", "rockchip,rk3368";
> >
> > +- Rockchip PX5 Evaluation board:
> > + Required root node properties:
> > + - compatible = "rockchip,px5-evb", "rockchip,px5",
> > "rockchip,rk3368"; +
> >
> > - Rockchip RK3228 Evaluation board:
> > Required root node properties:
> > - compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/Makefile
> > b/arch/arm64/boot/dts/rockchip/Makefile index 7037a16..86c74b2 100644
> > --- a/arch/arm64/boot/dts/rockchip/Makefile
> > +++ b/arch/arm64/boot/dts/rockchip/Makefile
> > @@ -1,6 +1,7 @@
> >
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
> >
> > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
>
> There is no PX5 listed on your English website (yet), but given that you
> have your own rockchip/ folder for arm64 I would encourage you to rename
> to px5-evb.dtb independent of any internal heritage or compatibility the
> SoC has. Compare apq/ipq/msm in qcom.
I prefer to keep it like it is, see comment in px3 patch.
>
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
> >
> > always := $(dtb-y)
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
> > b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts new file mode 100644
> > index 0000000..be0e915
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
> > @@ -0,0 +1,304 @@
> > +/*
> > + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
> > + *
> > + * This file is dual-licensed: you can use it either under the terms
> > + * of the GPL or the X11 license, at your option. Note that this dual
> > + * licensing only applies to this file, and not this project as a
> > + * whole.
> > + *
> > + * a) This file is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of the
> > + * License, or (at your option) any later version.
> > + *
> > + * This file is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * Or, alternatively,
> > + *
> > + * b) Permission is hereby granted, free of charge, to any person
> > + * obtaining a copy of this software and associated documentation
> > + * files (the "Software"), to deal in the Software without
> > + * restriction, including without limitation the rights to use,
> > + * copy, modify, merge, publish, distribute, sublicense, and/or
> > + * sell copies of the Software, and to permit persons to whom the
> > + * Software is furnished to do so, subject to the following
> > + * conditions:
> > + *
> > + * The above copyright notice and this permission notice shall be
> > + * included in all copies or substantial portions of the Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> > + * OTHER DEALINGS IN THE SOFTWARE.
> > + */
> > +
> > +/dts-v1/;
> > +#include "rk3368.dtsi"
>
> Similarly suggest a px5.dtsi here.
>
> > +#include <dt-bindings/input/input.h>
> > +
> > +/ {
> > + model = "Rockchip PX5 EVB";
> > + compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
> > +
> > + chosen {
> > + stdout-path = "serial4:115200n8";
> > + };
> > +
> > + memory@0 {
> > + device_type = "memory";
> > + reg = <0x0 0x0 0x0 0x80000000>;
> > + };
> > +
> > + keys: gpio-keys {
> > + compatible = "gpio-keys";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pwr_key>;
> > +
> > + power {
> > + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
> > + label = "GPIO Power";
> > + linux,code = <KEY_POWER>;
> > + wakeup-source;
> > + };
> > + };
> > +
> > + vcc_sys: vcc-sys-regulator {
> > + compatible = "regulator-fixed";
> > + regulator-name = "vcc_sys";
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5000000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +};
> > +
> > +&emmc {
> > + status = "okay";
> > + bus-width = <8>;
> > + cap-mmc-highspeed;
> > + clock-frequency = <150000000>;
> > + disable-wp;
> > + keep-power-in-suspend;
> > + non-removable;
> > + num-slots = <1>;
> > + vmmc-supply = <&vcc_io>;
> > + vqmmc-supply = <&vcc18_flash>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
> > +};
> > +
> > +&i2c0 {
> > + status = "okay";
> > +
> > + rk808: pmic@1b {
> > + compatible = "rockchip,rk808";
> > + reg = <0x1b>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
> > + interrupt-parent = <&gpio0>;
> > + interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
> > + rockchip,system-power-controller;
> > + vcc1-supply = <&vcc_sys>;
> > + vcc2-supply = <&vcc_sys>;
> > + vcc3-supply = <&vcc_sys>;
> > + vcc4-supply = <&vcc_sys>;
> > + vcc6-supply = <&vcc_sys>;
> > + vcc7-supply = <&vcc_sys>;
> > + vcc8-supply = <&vcc_io>;
> > + vcc9-supply = <&vcc_sys>;
> > + vcc10-supply = <&vcc_sys>;
> > + vcc11-supply = <&vcc_sys>;
> > + vcc12-supply = <&vcc_io>;
> > + clock-output-names = "xin32k", "rk808-clkout2";
> > + #clock-cells = <1>;
> > +
> > + regulators {
> > + vdd_cpu: DCDC_REG1 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <700000>;
> > + regulator-max-microvolt = <1500000>;
> > + regulator-name = "vdd_cpu";
> > + };
> > +
> > + vdd_log: DCDC_REG2 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <700000>;
> > + regulator-max-microvolt = <1500000>;
> > + regulator-name = "vdd_log";
> > + };
> > +
> > + vcc_ddr: DCDC_REG3 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-name = "vcc_ddr";
> > + };
> > +
> > + vcc_io: DCDC_REG4 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-name = "vcc_io";
> > + };
> > +
> > + vcc18_flash: LDO_REG1 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-name = "vcc18_flash";
> > + };
> > +
> > + vcca_33: LDO_REG2 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-name = "vcca_33";
> > + };
> > +
> > + vdd_10: LDO_REG3 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1000000>;
> > + regulator-max-microvolt = <1000000>;
> > + regulator-name = "vdd_10";
> > + };
> > +
> > + avdd_33: LDO_REG4 {
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-name = "avdd_33";
> > + };
> > +
> > + vccio_sd: LDO_REG5 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-name = "vccio_sd";
> > + };
> > +
> > + vdd10_lcd: LDO_REG6 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1000000>;
> > + regulator-max-microvolt = <1000000>;
> > + regulator-name = "vdd10_lcd";
> > + };
> > +
> > + vcc_18: LDO_REG7 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-name = "vcc_18";
> > + };
> > +
> > + vcc18_lcd: LDO_REG8 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-name = "vcc18_lcd";
> > + };
> > +
> > + vcc_sd: SWITCH_REG1 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-name = "vcc_sd";
> > + };
> > +
> > + vcc33_lcd: SWITCH_REG2 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-name = "vcc33_lcd";
> > + };
> > + };
> > + };
> > +};
> > +
> > +&i2c1 {
> > + status = "okay";
> > +
> > + /* Accelerometer */
> > + bma250@18 {
changed to accelerometer@18 similar to px3
> > + compatible = "bosch,bma250";
> > + reg = <0x18>;
> > + interrupt-parent = <&gpio2>;
> > + interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
> > + };
> > +
> > + stk3410@48 {
> > + compatible = "sensortek,STK3310";
> > + reg = <0x48>;
> > + interrupt-parent = <&gpio2>;
> > + interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
> > + };
> > +};
> > +
> > +&i2c2 {
> > + status = "okay";
> > +
> > + gsl1680: touchscreen@40 {
> > + compatible = "silead,gsl1680";
> > + reg = <0x40>;
> > + interrupt-parent = <&gpio3>;
> > + interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
> > + power-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
> > + touchscreen-size-x = <800>;
> > + touchscreen-size-y = <1280>;
> > + silead,max-fingers = <5>;
> > + };
> > +};
> > +
> > +&pinctrl {
> > +
>
> Drop white line?
seems I dropped that already.
> > + keys {
> > + pwr_key: pwr-key {
> > + rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>;
> > + };
> > + };
> > +
> > + pmic {
> > + pmic_sleep: pmic-sleep {
> > + rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
> > + };
> > +
> > + pmic_int: pmic-int {
> > + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
> > + };
> > + };
> > +};
> > +
> > +&tsadc {
> > + status = "okay";
> > + rockchip,hw-tshut-mode = <0>; /* CRU */
> > + rockchip,hw-tshut-polarity = <1>; /* high */
> > +};
> > +
> > +&uart4 {
> > + status = "okay";
> > +};
> > +
> > +&usb_host0_ehci {
> > + status = "okay";
> > +};
> > +
> > +&usb_otg {
> > + status = "okay";
> > +};
> > +
> > +&wdt {
> > + status = "okay";
> > +};
>
> Otherwise formally looks fine.
Thanks for looking at the patch.
Heiko
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v1 2/2] arm64: dts: rockchip: Add PX5 Evaluation board
@ 2016-10-10 12:23 ` Heiko Stuebner
0 siblings, 0 replies; 27+ messages in thread
From: Heiko Stuebner @ 2016-10-10 12:23 UTC (permalink / raw)
To: linux-arm-kernel
Hi Andreas, Andy,
Am Dienstag, 13. September 2016, 14:23:35 CEST schrieb Andreas F?rber:
> Hi,
>
> Am 10.09.2016 um 19:47 schrieb Andy Yan:
> > PX5 EVB is designed by Rockchip for automotive field,
> > which intergrated with CVBS(TP2825)/MIPI DSI/CSI/LVDS
> > HDMI video input/output interface, audio codec ES8396,
> > WIFI/BT(on RTL8723BS), Gsensor BMA250E and light&proximity
> > sensor STK3410.
> >
> > Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
>
> Most comments from PX3 1/2 apply here, too.
ammended te commit
> > ---
> >
> > Changes in v1:
> > - board rename
> > - add vendor prefix for i2c interfaced devices
> >
> > Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
> > arch/arm64/boot/dts/rockchip/Makefile | 1 +
> > arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts | 304
> > +++++++++++++++++++++ 3 files changed, 309 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
> >
> > diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt
> > b/Documentation/devicetree/bindings/arm/rockchip.txt index
> > 6da3881..b6f92d6 100644
> > --- a/Documentation/devicetree/bindings/arm/rockchip.txt
> > +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
> > @@ -107,6 +107,10 @@ Rockchip platforms device tree bindings
> >
> > Required root node properties:
> > - compatible = "rockchip,r88", "rockchip,rk3368";
> >
> > +- Rockchip PX5 Evaluation board:
> > + Required root node properties:
> > + - compatible = "rockchip,px5-evb", "rockchip,px5",
> > "rockchip,rk3368"; +
> >
> > - Rockchip RK3228 Evaluation board:
> > Required root node properties:
> > - compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/Makefile
> > b/arch/arm64/boot/dts/rockchip/Makefile index 7037a16..86c74b2 100644
> > --- a/arch/arm64/boot/dts/rockchip/Makefile
> > +++ b/arch/arm64/boot/dts/rockchip/Makefile
> > @@ -1,6 +1,7 @@
> >
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
> >
> > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
>
> There is no PX5 listed on your English website (yet), but given that you
> have your own rockchip/ folder for arm64 I would encourage you to rename
> to px5-evb.dtb independent of any internal heritage or compatibility the
> SoC has. Compare apq/ipq/msm in qcom.
I prefer to keep it like it is, see comment in px3 patch.
>
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
> >
> > always := $(dtb-y)
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
> > b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts new file mode 100644
> > index 0000000..be0e915
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
> > @@ -0,0 +1,304 @@
> > +/*
> > + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
> > + *
> > + * This file is dual-licensed: you can use it either under the terms
> > + * of the GPL or the X11 license, at your option. Note that this dual
> > + * licensing only applies to this file, and not this project as a
> > + * whole.
> > + *
> > + * a) This file is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of the
> > + * License, or (at your option) any later version.
> > + *
> > + * This file is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * Or, alternatively,
> > + *
> > + * b) Permission is hereby granted, free of charge, to any person
> > + * obtaining a copy of this software and associated documentation
> > + * files (the "Software"), to deal in the Software without
> > + * restriction, including without limitation the rights to use,
> > + * copy, modify, merge, publish, distribute, sublicense, and/or
> > + * sell copies of the Software, and to permit persons to whom the
> > + * Software is furnished to do so, subject to the following
> > + * conditions:
> > + *
> > + * The above copyright notice and this permission notice shall be
> > + * included in all copies or substantial portions of the Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> > + * OTHER DEALINGS IN THE SOFTWARE.
> > + */
> > +
> > +/dts-v1/;
> > +#include "rk3368.dtsi"
>
> Similarly suggest a px5.dtsi here.
>
> > +#include <dt-bindings/input/input.h>
> > +
> > +/ {
> > + model = "Rockchip PX5 EVB";
> > + compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
> > +
> > + chosen {
> > + stdout-path = "serial4:115200n8";
> > + };
> > +
> > + memory at 0 {
> > + device_type = "memory";
> > + reg = <0x0 0x0 0x0 0x80000000>;
> > + };
> > +
> > + keys: gpio-keys {
> > + compatible = "gpio-keys";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pwr_key>;
> > +
> > + power {
> > + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
> > + label = "GPIO Power";
> > + linux,code = <KEY_POWER>;
> > + wakeup-source;
> > + };
> > + };
> > +
> > + vcc_sys: vcc-sys-regulator {
> > + compatible = "regulator-fixed";
> > + regulator-name = "vcc_sys";
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5000000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +};
> > +
> > +&emmc {
> > + status = "okay";
> > + bus-width = <8>;
> > + cap-mmc-highspeed;
> > + clock-frequency = <150000000>;
> > + disable-wp;
> > + keep-power-in-suspend;
> > + non-removable;
> > + num-slots = <1>;
> > + vmmc-supply = <&vcc_io>;
> > + vqmmc-supply = <&vcc18_flash>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
> > +};
> > +
> > +&i2c0 {
> > + status = "okay";
> > +
> > + rk808: pmic at 1b {
> > + compatible = "rockchip,rk808";
> > + reg = <0x1b>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
> > + interrupt-parent = <&gpio0>;
> > + interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
> > + rockchip,system-power-controller;
> > + vcc1-supply = <&vcc_sys>;
> > + vcc2-supply = <&vcc_sys>;
> > + vcc3-supply = <&vcc_sys>;
> > + vcc4-supply = <&vcc_sys>;
> > + vcc6-supply = <&vcc_sys>;
> > + vcc7-supply = <&vcc_sys>;
> > + vcc8-supply = <&vcc_io>;
> > + vcc9-supply = <&vcc_sys>;
> > + vcc10-supply = <&vcc_sys>;
> > + vcc11-supply = <&vcc_sys>;
> > + vcc12-supply = <&vcc_io>;
> > + clock-output-names = "xin32k", "rk808-clkout2";
> > + #clock-cells = <1>;
> > +
> > + regulators {
> > + vdd_cpu: DCDC_REG1 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <700000>;
> > + regulator-max-microvolt = <1500000>;
> > + regulator-name = "vdd_cpu";
> > + };
> > +
> > + vdd_log: DCDC_REG2 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <700000>;
> > + regulator-max-microvolt = <1500000>;
> > + regulator-name = "vdd_log";
> > + };
> > +
> > + vcc_ddr: DCDC_REG3 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-name = "vcc_ddr";
> > + };
> > +
> > + vcc_io: DCDC_REG4 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-name = "vcc_io";
> > + };
> > +
> > + vcc18_flash: LDO_REG1 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-name = "vcc18_flash";
> > + };
> > +
> > + vcca_33: LDO_REG2 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-name = "vcca_33";
> > + };
> > +
> > + vdd_10: LDO_REG3 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1000000>;
> > + regulator-max-microvolt = <1000000>;
> > + regulator-name = "vdd_10";
> > + };
> > +
> > + avdd_33: LDO_REG4 {
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-name = "avdd_33";
> > + };
> > +
> > + vccio_sd: LDO_REG5 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-name = "vccio_sd";
> > + };
> > +
> > + vdd10_lcd: LDO_REG6 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1000000>;
> > + regulator-max-microvolt = <1000000>;
> > + regulator-name = "vdd10_lcd";
> > + };
> > +
> > + vcc_18: LDO_REG7 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-name = "vcc_18";
> > + };
> > +
> > + vcc18_lcd: LDO_REG8 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-name = "vcc18_lcd";
> > + };
> > +
> > + vcc_sd: SWITCH_REG1 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-name = "vcc_sd";
> > + };
> > +
> > + vcc33_lcd: SWITCH_REG2 {
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-name = "vcc33_lcd";
> > + };
> > + };
> > + };
> > +};
> > +
> > +&i2c1 {
> > + status = "okay";
> > +
> > + /* Accelerometer */
> > + bma250 at 18 {
changed to accelerometer at 18 similar to px3
> > + compatible = "bosch,bma250";
> > + reg = <0x18>;
> > + interrupt-parent = <&gpio2>;
> > + interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
> > + };
> > +
> > + stk3410 at 48 {
> > + compatible = "sensortek,STK3310";
> > + reg = <0x48>;
> > + interrupt-parent = <&gpio2>;
> > + interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
> > + };
> > +};
> > +
> > +&i2c2 {
> > + status = "okay";
> > +
> > + gsl1680: touchscreen at 40 {
> > + compatible = "silead,gsl1680";
> > + reg = <0x40>;
> > + interrupt-parent = <&gpio3>;
> > + interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
> > + power-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
> > + touchscreen-size-x = <800>;
> > + touchscreen-size-y = <1280>;
> > + silead,max-fingers = <5>;
> > + };
> > +};
> > +
> > +&pinctrl {
> > +
>
> Drop white line?
seems I dropped that already.
> > + keys {
> > + pwr_key: pwr-key {
> > + rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>;
> > + };
> > + };
> > +
> > + pmic {
> > + pmic_sleep: pmic-sleep {
> > + rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
> > + };
> > +
> > + pmic_int: pmic-int {
> > + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
> > + };
> > + };
> > +};
> > +
> > +&tsadc {
> > + status = "okay";
> > + rockchip,hw-tshut-mode = <0>; /* CRU */
> > + rockchip,hw-tshut-polarity = <1>; /* high */
> > +};
> > +
> > +&uart4 {
> > + status = "okay";
> > +};
> > +
> > +&usb_host0_ehci {
> > + status = "okay";
> > +};
> > +
> > +&usb_otg {
> > + status = "okay";
> > +};
> > +
> > +&wdt {
> > + status = "okay";
> > +};
>
> Otherwise formally looks fine.
Thanks for looking at the patch.
Heiko
^ permalink raw reply [flat|nested] 27+ messages in thread
end of thread, other threads:[~2016-10-10 12:24 UTC | newest]
Thread overview: 27+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-09-10 17:40 [PATCH v1 0/2] Add two automotive field Evaluation boards from rockchip Andy Yan
2016-09-10 17:40 ` Andy Yan
2016-09-10 17:40 ` Andy Yan
2016-09-10 17:44 ` [PATCH v1 1/2] ARM: dts: add rockchip PX3 Evaluation board Andy Yan
2016-09-10 17:44 ` Andy Yan
2016-09-10 17:44 ` Andy Yan
2016-09-13 10:06 ` Andy Yan
2016-09-13 10:06 ` Andy Yan
2016-09-13 11:04 ` Heiko Stuebner
2016-09-13 11:04 ` Heiko Stuebner
2016-09-13 11:04 ` Heiko Stuebner
2016-09-13 12:14 ` Andreas Färber
2016-09-13 12:14 ` Andreas Färber
2016-10-10 9:54 ` Heiko Stuebner
2016-10-10 9:54 ` Heiko Stuebner
2016-10-10 9:54 ` Heiko Stuebner
2016-10-10 11:25 ` Andy Yan
2016-10-10 11:25 ` Andy Yan
2016-10-10 11:25 ` Andy Yan
2016-09-10 17:47 ` [PATCH v1 2/2] arm64: dts: rockchip: Add PX5 " Andy Yan
2016-09-10 17:47 ` Andy Yan
2016-09-10 17:47 ` Andy Yan
2016-09-13 12:23 ` Andreas Färber
2016-09-13 12:23 ` Andreas Färber
2016-09-13 12:23 ` Andreas Färber
2016-10-10 12:23 ` Heiko Stuebner
2016-10-10 12:23 ` Heiko Stuebner
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.