All of lore.kernel.org
 help / color / mirror / Atom feed
From: Deepa Dinamani <deepa.kernel@gmail.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: arnd@arndb.de, y2038@lists.linaro.org
Subject: [PATCH 4/4] input: serio: Replace timeval by timespec64
Date: Tue, 13 Sep 2016 07:10:05 -0700	[thread overview]
Message-ID: <1473775805-2242-5-git-send-email-deepa.kernel@gmail.com> (raw)
In-Reply-To: <1473775805-2242-1-git-send-email-deepa.kernel@gmail.com>

struct timeval is not y2038 safe.
All references to timeval will be deleted from the
kernel to make it y2038 safe.
Replace its uses by y2038 safe struct timespec64.

The timestamps changed here only keep track of delta
times. These timestamps are also internal to kernel.
Hence, monotonic times are sufficient here.
The unit of the delta times is also changed in certain
cases to nanoseconds rather than microseconds. This is
in line with timespec64 which keeps time in nanoseconds.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
---
 drivers/input/serio/hil_mlc.c    | 37 ++++++++++++++++++-------------------
 drivers/input/serio/hp_sdc.c     | 17 +++++++++--------
 drivers/input/serio/hp_sdc_mlc.c | 10 +++++-----
 include/linux/hil_mlc.h          |  6 +++---
 include/linux/hp_sdc.h           |  6 +++---
 5 files changed, 38 insertions(+), 38 deletions(-)

diff --git a/drivers/input/serio/hil_mlc.c b/drivers/input/serio/hil_mlc.c
index 65605e4..7c59a79 100644
--- a/drivers/input/serio/hil_mlc.c
+++ b/drivers/input/serio/hil_mlc.c
@@ -274,14 +274,14 @@ static int hilse_match(hil_mlc *mlc, int unused)
 /* An LCV used to prevent runaway loops, forces 5 second sleep when reset. */
 static int hilse_init_lcv(hil_mlc *mlc, int unused)
 {
-	struct timeval tv;
+	time64_t time;
 
-	do_gettimeofday(&tv);
+	time = ktime_get_seconds();
 
-	if (mlc->lcv && (tv.tv_sec - mlc->lcv_tv.tv_sec) < 5)
+	if (mlc->lcv && (time - mlc->lcv_tv.tv_sec) < 5)
 		return -1;
 
-	mlc->lcv_tv = tv;
+	mlc->lcv_tv.tv_sec = time;
 	mlc->lcv = 0;
 
 	return 0;
@@ -466,7 +466,7 @@ static const struct hilse_node hil_mlc_se[HILSEN_END] = {
 	FUNC(hilse_init_lcv, 0,	HILSEN_NEXT,	HILSEN_SLEEP,	0)
 
 	/* 1  HILSEN_RESTART */
-	FUNC(hilse_inc_lcv, 10,	HILSEN_NEXT,	HILSEN_START,  0)
+	FUNC(hilse_inc_lcv, 10000,	HILSEN_NEXT,	HILSEN_START,  0)
 	OUT(HIL_CTRL_ONLY)			/* Disable APE */
 	CTS
 
@@ -485,7 +485,7 @@ static const struct hilse_node hil_mlc_se[HILSEN_END] = {
 	FUNC(hilse_init_lcv, 0,	HILSEN_NEXT,	HILSEN_SLEEP,	0)
 
 	/* 10 HILSEN_DHR2 */
-	FUNC(hilse_inc_lcv, 10,	HILSEN_NEXT,	HILSEN_START,	0)
+	FUNC(hilse_inc_lcv, 10000,	HILSEN_NEXT,	HILSEN_START,	0)
 	FUNC(hilse_set_ddi, -1,	HILSEN_NEXT,	0,		0)
 	OUT(HIL_PKT_CMD | HIL_CMD_DHR)
 	IN(300000,		HILSEN_DHR2,	HILSEN_DHR2,	HILSEN_NEXT)
@@ -515,7 +515,7 @@ static const struct hilse_node hil_mlc_se[HILSEN_END] = {
 	FUNC(hilse_init_lcv, 0,	HILSEN_NEXT,	HILSEN_DOZE,	0)
 
 	/* 22 HILSEN_ACF2 */
-	FUNC(hilse_inc_lcv, 10,	HILSEN_NEXT,	HILSEN_START,	0)
+	FUNC(hilse_inc_lcv, 10000,	HILSEN_NEXT,	HILSEN_START,	0)
 	OUT(HIL_PKT_CMD | HIL_CMD_ACF | 1)
 	IN(20000,		HILSEN_NEXT,	HILSEN_DSR,	HILSEN_NEXT)
 
@@ -572,7 +572,7 @@ static const struct hilse_node hil_mlc_se[HILSEN_END] = {
 	OUT(HIL_PKT_CMD | HIL_CMD_RPL)
 	EXPECT(HIL_PKT_CMD | HIL_CMD_RPL | HIL_ERR_INT,
 	       20000,		HILSEN_NEXT,	HILSEN_DSR,	HILSEN_NEXT)
-	FUNC(hilse_operate, 1,	HILSEN_OPERATE,	HILSEN_IFC,	HILSEN_PROBE)
+	FUNC(hilse_operate, 1000, HILSEN_OPERATE, HILSEN_IFC,	HILSEN_PROBE)
 
 	/* 58 HILSEN_IFCACF */
 	OUT(HIL_PKT_CMD | HIL_CMD_IFC)
@@ -584,7 +584,6 @@ static const struct hilse_node hil_mlc_se[HILSEN_END] = {
 
 static inline void hilse_setup_input(hil_mlc *mlc, const struct hilse_node *node)
 {
-
 	switch (node->act) {
 	case HILSE_EXPECT_DISC:
 		mlc->imatch = node->object.packet;
@@ -605,7 +604,7 @@ static inline void hilse_setup_input(hil_mlc *mlc, const struct hilse_node *node
 	}
 	mlc->istarted = 1;
 	mlc->intimeout = node->arg;
-	do_gettimeofday(&(mlc->instart));
+	ktime_get_ts64(&(mlc->instart));
 	mlc->icount = 15;
 	memset(mlc->ipacket, 0, 16 * sizeof(hil_packet));
 	BUG_ON(down_trylock(&mlc->isem));
@@ -710,7 +709,7 @@ static int hilse_donode(hil_mlc *mlc)
 			break;
 		}
 		mlc->ostarted = 0;
-		do_gettimeofday(&(mlc->instart));
+		ktime_get_ts64(&(mlc->instart));
 		write_unlock_irqrestore(&mlc->lock, flags);
 		nextidx = HILSEN_NEXT;
 		break;
@@ -731,18 +730,18 @@ static int hilse_donode(hil_mlc *mlc)
 #endif
 
 	while (nextidx & HILSEN_SCHED) {
-		struct timeval tv;
+		struct timespec64 ts;
 
 		if (!sched_long)
 			goto sched;
 
-		do_gettimeofday(&tv);
-		tv.tv_usec += USEC_PER_SEC * (tv.tv_sec - mlc->instart.tv_sec);
-		tv.tv_usec -= mlc->instart.tv_usec;
-		if (tv.tv_usec >= mlc->intimeout) goto sched;
-		tv.tv_usec = (mlc->intimeout - tv.tv_usec) * HZ / USEC_PER_SEC;
-		if (!tv.tv_usec) goto sched;
-		mod_timer(&hil_mlcs_kicker, jiffies + tv.tv_usec);
+		ktime_get_ts64(&ts);
+		ts.tv_nsec += NSEC_PER_SEC * (ts.tv_sec - mlc->instart.tv_sec);
+		ts.tv_nsec -= mlc->instart.tv_nsec;
+		if (ts.tv_nsec >= mlc->intimeout) goto sched;
+		ts.tv_nsec = (mlc->intimeout - ts.tv_nsec) * HZ / NSEC_PER_SEC;
+		if (!ts.tv_nsec) goto sched;
+		mod_timer(&hil_mlcs_kicker, jiffies + ts.tv_nsec);
 		break;
 	sched:
 		tasklet_schedule(&hil_mlcs_tasklet);
diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index 852858e..ce8f21b 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -193,7 +193,7 @@ static void hp_sdc_take(int irq, void *dev_id, uint8_t status, uint8_t data)
 	curr->seq[curr->idx++] = status;
 	curr->seq[curr->idx++] = data;
 	hp_sdc.rqty -= 2;
-	do_gettimeofday(&hp_sdc.rtv);
+	ktime_get_ts64(&hp_sdc.rtv);
 
 	if (hp_sdc.rqty <= 0) {
 		/* All data has been gathered. */
@@ -306,13 +306,13 @@ static void hp_sdc_tasklet(unsigned long foo)
 	write_lock_irq(&hp_sdc.rtq_lock);
 
 	if (hp_sdc.rcurr >= 0) {
-		struct timeval tv;
+		struct timespec64 ts;
 
-		do_gettimeofday(&tv);
-		if (tv.tv_sec > hp_sdc.rtv.tv_sec)
-			tv.tv_usec += USEC_PER_SEC;
+		ktime_get_ts64(&ts);
+		if (ts.tv_sec > hp_sdc.rtv.tv_sec)
+			ts.tv_nsec += NSEC_PER_SEC;
 
-		if (tv.tv_usec - hp_sdc.rtv.tv_usec > HP_SDC_MAX_REG_DELAY) {
+		if (ts.tv_nsec - hp_sdc.rtv.tv_nsec > HP_SDC_MAX_REG_DELAY) {
 			hp_sdc_transaction *curr;
 			uint8_t tmp;
 
@@ -322,7 +322,8 @@ static void hp_sdc_tasklet(unsigned long foo)
 			 * it back to the application. and be less verbose.
 			 */
 			printk(KERN_WARNING PREFIX "read timeout (%ius)!\n",
-			       (int)(tv.tv_usec - hp_sdc.rtv.tv_usec));
+			       (int)(ts.tv_nsec - hp_sdc.rtv.tv_nsec) /
+				     (int)NSEC_PER_USEC);
 			curr->idx += hp_sdc.rqty;
 			hp_sdc.rqty = 0;
 			tmp = curr->seq[curr->actidx];
@@ -551,7 +552,7 @@ unsigned long hp_sdc_put(void)
 
 			/* Start a new read */
 			hp_sdc.rqty = curr->seq[curr->idx];
-			do_gettimeofday(&hp_sdc.rtv);
+			ktime_get_ts64(&hp_sdc.rtv);
 			curr->idx++;
 			/* Still need to lock here in case of spurious irq. */
 			write_lock_irq(&hp_sdc.rtq_lock);
diff --git a/drivers/input/serio/hp_sdc_mlc.c b/drivers/input/serio/hp_sdc_mlc.c
index d50f067..66020cd 100644
--- a/drivers/input/serio/hp_sdc_mlc.c
+++ b/drivers/input/serio/hp_sdc_mlc.c
@@ -149,7 +149,7 @@ static int hp_sdc_mlc_in(hil_mlc *mlc, suseconds_t timeout)
 
 	/* Try to down the semaphore */
 	if (down_trylock(&mlc->isem)) {
-		struct timeval tv;
+		struct timespec64 ts;
 		if (priv->emtestmode) {
 			mlc->ipacket[0] =
 				HIL_ERR_INT | (mlc->opacket &
@@ -160,11 +160,11 @@ static int hp_sdc_mlc_in(hil_mlc *mlc, suseconds_t timeout)
 			/* printk(KERN_DEBUG PREFIX ">[%x]\n", mlc->ipacket[0]); */
 			goto wasup;
 		}
-		do_gettimeofday(&tv);
-		tv.tv_usec += USEC_PER_SEC * (tv.tv_sec - mlc->instart.tv_sec);
-		if (tv.tv_usec - mlc->instart.tv_usec > mlc->intimeout) {
+		ktime_get_ts64(&ts);
+		ts.tv_nsec += NSEC_PER_SEC * (ts.tv_sec - mlc->instart.tv_sec);
+		if (ts.tv_nsec - mlc->instart.tv_nsec > mlc->intimeout) {
 			/*	printk("!%i %i",
-				tv.tv_usec - mlc->instart.tv_usec,
+				tv.tv_nsec - mlc->instart.tv_nsec,
 				mlc->intimeout);
 			 */
 			rc = 1;
diff --git a/include/linux/hil_mlc.h b/include/linux/hil_mlc.h
index 394a840..f846730 100644
--- a/include/linux/hil_mlc.h
+++ b/include/linux/hil_mlc.h
@@ -32,7 +32,7 @@
  */
 
 #include <linux/hil.h>
-#include <linux/time.h>
+#include <linux/time64.h>
 #include <linux/interrupt.h>
 #include <linux/semaphore.h>
 #include <linux/serio.h>
@@ -144,12 +144,12 @@ struct hil_mlc {
 	hil_packet		ipacket[16];
 	hil_packet		imatch;
 	int			icount;
-	struct timeval		instart;
+	struct timespec64	instart;
 	suseconds_t		intimeout;
 
 	int			ddi;	/* Last operational device id */
 	int			lcv;	/* LCV to throttle loops */
-	struct timeval		lcv_tv; /* Time loop was started */
+	struct timespec64	lcv_tv; /* Time loop was started */
 
 	int			di_map[7]; /* Maps below items to live devs */
 	struct hil_mlc_devinfo	di[HIL_MLC_DEVMEM];
diff --git a/include/linux/hp_sdc.h b/include/linux/hp_sdc.h
index d392975..d863944 100644
--- a/include/linux/hp_sdc.h
+++ b/include/linux/hp_sdc.h
@@ -47,9 +47,9 @@
 #endif
 
 
-/* No 4X status reads take longer than this (in usec).
+/* No 4X status reads take longer than this (in nsec).
  */
-#define HP_SDC_MAX_REG_DELAY 20000
+#define HP_SDC_MAX_REG_DELAY 20000000
 
 typedef void (hp_sdc_irqhook) (int irq, void *dev_id, 
 			       uint8_t status, uint8_t data);
@@ -281,7 +281,7 @@ typedef struct {
 	hp_sdc_transaction *tq[HP_SDC_QUEUE_LEN]; /* All pending read/writes */
 
 	int		rcurr, rqty;	/* Current read transact in process */
-	struct timeval	rtv;		/* Time when current read started */
+	struct timespec64 rtv;		/* Monotonic time when current read started */
 	int		wcurr;		/* Current write transact in process */
 
 	int		dev_err;	/* carries status from registration */
-- 
2.7.4

  parent reply	other threads:[~2016-09-13 14:10 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-13 14:10 [PATCH 0/4] Make input drivers y2038 safe Deepa Dinamani
2016-09-13 14:10 ` [PATCH 1/4] uinput: Add ioctl for using monotonic/ boot times Deepa Dinamani
2016-09-13 14:10   ` Deepa Dinamani
2016-09-13 15:07   ` Arnd Bergmann
2016-09-15 17:11     ` Deepa Dinamani
2016-09-13 14:10 ` [PATCH 2/4] input: evdev: Replace timeval with timespec64 Deepa Dinamani
2016-09-13 15:08   ` Arnd Bergmann
2016-09-13 14:10 ` [PATCH 3/4] input: Deprecate real timestamps beyond year 2106 Deepa Dinamani
2016-09-13 14:59   ` Arnd Bergmann
2016-09-13 16:06   ` kbuild test robot
2016-09-13 16:06     ` kbuild test robot
2016-09-13 16:34     ` Deepa Dinamani
2016-09-13 20:10       ` Deepa Dinamani
2016-09-13 20:40         ` Arnd Bergmann
2016-09-13 20:40           ` Arnd Bergmann
2016-09-13 14:10 ` Deepa Dinamani [this message]
2016-09-13 15:13   ` [PATCH 4/4] input: serio: Replace timeval by timespec64 Arnd Bergmann
2016-09-15 17:21     ` Deepa Dinamani

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1473775805-2242-5-git-send-email-deepa.kernel@gmail.com \
    --to=deepa.kernel@gmail.com \
    --cc=arnd@arndb.de \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=y2038@lists.linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.