All of lore.kernel.org
 help / color / mirror / Atom feed
From: <akolli@qti.qualcomm.com>
To: <ath10k@lists.infradead.org>
Cc: <akolli@codeaurora.org>, <linux-wireless@vger.kernel.org>,
	Anilkumar Kolli <akolli@qti.qualcomm.com>
Subject: [PATCH] ath10k: add cc_wraparound type for QCA9888 and QCA9884
Date: Fri, 16 Sep 2016 17:15:27 +0530	[thread overview]
Message-ID: <1474026327-7065-1-git-send-email-akolli@qti.qualcomm.com> (raw)

From: Anilkumar Kolli <akolli@qti.qualcomm.com>

During offchannel scan, iw survey dump shows wrong values.
Fix this by assigning cycle counter wranarround type for
QCA9888 and QCA9884, they share same config with QCA4019.

Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 3a8984ba9f74..93168d9f8902 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -191,6 +191,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.name = "qca9984/qca9994 hw1.0",
 		.patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR,
 		.uart_pin = 7,
+		.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
 		.otp_exe_param = 0x00000700,
 		.continuous_frag_desc = true,
 		.cck_rate_map_rev2 = true,
@@ -215,6 +216,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.name = "qca9888 hw2.0",
 		.patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR,
 		.uart_pin = 7,
+		.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
 		.otp_exe_param = 0x00000700,
 		.continuous_frag_desc = true,
 		.channel_counters_freq_hz = 150000,
-- 
1.7.9.5

WARNING: multiple messages have this Message-ID (diff)
From: <akolli@qti.qualcomm.com>
To: ath10k@lists.infradead.org
Cc: Anilkumar Kolli <akolli@qti.qualcomm.com>,
	akolli@codeaurora.org, linux-wireless@vger.kernel.org
Subject: [PATCH] ath10k: add cc_wraparound type for QCA9888 and QCA9884
Date: Fri, 16 Sep 2016 17:15:27 +0530	[thread overview]
Message-ID: <1474026327-7065-1-git-send-email-akolli@qti.qualcomm.com> (raw)

From: Anilkumar Kolli <akolli@qti.qualcomm.com>

During offchannel scan, iw survey dump shows wrong values.
Fix this by assigning cycle counter wranarround type for
QCA9888 and QCA9884, they share same config with QCA4019.

Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 3a8984ba9f74..93168d9f8902 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -191,6 +191,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.name = "qca9984/qca9994 hw1.0",
 		.patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR,
 		.uart_pin = 7,
+		.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
 		.otp_exe_param = 0x00000700,
 		.continuous_frag_desc = true,
 		.cck_rate_map_rev2 = true,
@@ -215,6 +216,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.name = "qca9888 hw2.0",
 		.patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR,
 		.uart_pin = 7,
+		.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
 		.otp_exe_param = 0x00000700,
 		.continuous_frag_desc = true,
 		.channel_counters_freq_hz = 150000,
-- 
1.7.9.5


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

             reply	other threads:[~2016-09-16 11:45 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-16 11:45 akolli [this message]
2016-09-16 11:45 ` [PATCH] ath10k: add cc_wraparound type for QCA9888 and QCA9884 akolli
2016-10-04 14:58 ` Kalle Valo
2016-10-04 14:58   ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1474026327-7065-1-git-send-email-akolli@qti.qualcomm.com \
    --to=akolli@qti.qualcomm.com \
    --cc=akolli@codeaurora.org \
    --cc=ath10k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.