From: Krzysztof Kozlowski <krzk@kernel.org>
To: Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Javier Martinez Canillas <javier@osg.samsung.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 5/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos4415
Date: Fri, 16 Sep 2016 23:42:00 +0200 [thread overview]
Message-ID: <1474062122-22720-6-git-send-email-krzk@kernel.org> (raw)
In-Reply-To: <1474062122-22720-1-git-send-email-krzk@kernel.org>
Replace hard-coded values of type of GIC interrupt and its flags with
respective macros from header to increase code readability
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos4415-pinctrl.dtsi | 32 ++++-----
arch/arm/boot/dts/exynos4415.dtsi | 108 +++++++++++++++---------------
2 files changed, 71 insertions(+), 69 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi b/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
index 4863147be39a..f8d246cad22c 100644
--- a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
@@ -358,14 +358,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
- interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
- <0 33 IRQ_TYPE_LEVEL_HIGH>,
- <0 34 IRQ_TYPE_LEVEL_HIGH>,
- <0 35 IRQ_TYPE_LEVEL_HIGH>,
- <0 36 IRQ_TYPE_LEVEL_HIGH>,
- <0 37 IRQ_TYPE_LEVEL_HIGH>,
- <0 38 IRQ_TYPE_LEVEL_HIGH>,
- <0 39 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
@@ -375,14 +375,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
- interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>,
- <0 41 IRQ_TYPE_LEVEL_HIGH>,
- <0 42 IRQ_TYPE_LEVEL_HIGH>,
- <0 43 IRQ_TYPE_LEVEL_HIGH>,
- <0 44 IRQ_TYPE_LEVEL_HIGH>,
- <0 45 IRQ_TYPE_LEVEL_HIGH>,
- <0 46 IRQ_TYPE_LEVEL_HIGH>,
- <0 47 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
diff --git a/arch/arm/boot/dts/exynos4415.dtsi b/arch/arm/boot/dts/exynos4415.dtsi
index 2ad6b6f9a37b..8d887ac380ab 100644
--- a/arch/arm/boot/dts/exynos4415.dtsi
+++ b/arch/arm/boot/dts/exynos4415.dtsi
@@ -18,6 +18,7 @@
#include <dt-bindings/clock/exynos4415.h>
#include <dt-bindings/clock/exynos-audss-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
@@ -106,7 +107,7 @@
pinctrl_2: pinctrl@03860000 {
compatible = "samsung,exynos4415-pinctrl";
reg = <0x03860000 0x1000>;
- interrupts = <0 242 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
};
chipid@10000000 {
@@ -181,21 +182,22 @@
rtc: rtc@10070000 {
compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
- interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>, <0 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
mct@10050000 {
compatible = "samsung,exynos4210-mct";
reg = <0x10050000 0x800>;
- interrupts = <0 218 IRQ_TYPE_LEVEL_HIGH>,
- <0 219 IRQ_TYPE_LEVEL_HIGH>,
- <0 220 IRQ_TYPE_LEVEL_HIGH>,
- <0 221 IRQ_TYPE_LEVEL_HIGH>,
- <0 223 IRQ_TYPE_LEVEL_HIGH>,
- <0 226 IRQ_TYPE_LEVEL_HIGH>,
- <0 227 IRQ_TYPE_LEVEL_HIGH>,
- <0 228 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
clock-names = "fin_pll", "mct";
};
@@ -234,28 +236,28 @@
pinctrl_1: pinctrl@11000000 {
compatible = "samsung,exynos4415-pinctrl";
reg = <0x11000000 0x1000>;
- interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos4415-pinctrl";
reg = <0x11400000 0x1000>;
- interrupts = <0 240 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
};
fimd: fimd@11C00000 {
compatible = "samsung,exynos4415-fimd";
reg = <0x11C00000 0x30000>;
interrupt-names = "fifo", "vsync", "lcd_sys";
- interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>,
- <0 85 IRQ_TYPE_LEVEL_HIGH>,
- <0 86 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
clock-names = "sclk_fimd", "fimd";
samsung,power-domain = <&pd_lcd0>;
@@ -267,7 +269,7 @@
dsi_0: dsi@11C80000 {
compatible = "samsung,exynos4415-mipi-dsi";
reg = <0x11C80000 0x10000>;
- interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
samsung,phy-type = <0>;
samsung,power-domain = <&pd_lcd0>;
phys = <&mipi_phy 1>;
@@ -282,8 +284,8 @@
sysmmu_fimd0: sysmmu@11E20000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11e20000 0x1000>;
- interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>,
- <0 81 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sysmmu", "master";
clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>;
power-domains = <&pd_lcd0>;
@@ -293,7 +295,7 @@
hsotg: hsotg@12480000 {
compatible = "samsung,s3c6400-hsotg";
reg = <0x12480000 0x20000>;
- interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_USBDEVICE>;
clock-names = "otg";
phys = <&exynos_usbphy 0>;
@@ -304,7 +306,7 @@
mshc_0: mshc@12510000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12510000 0x1000>;
- interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
@@ -316,7 +318,7 @@
mshc_1: mshc@12520000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12520000 0x1000>;
- interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
@@ -328,7 +330,7 @@
mshc_2: mshc@12530000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12530000 0x1000>;
- interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
@@ -340,7 +342,7 @@
ehci: ehci@12580000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12580000 0x100>;
- interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_USBHOST>;
clock-names = "usbhost";
status = "disabled";
@@ -366,7 +368,7 @@
ohci: ohci@12590000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12590000 0x100>;
- interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_USBHOST>;
clock-names = "usbhost";
status = "disabled";
@@ -400,7 +402,7 @@
pdma0: pdma@12680000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
- interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -411,7 +413,7 @@
pdma1: pdma@12690000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
- interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -424,7 +426,7 @@
compatible = "samsung,exynos3250-adc",
"samsung,exynos-adc-v2";
reg = <0x126C0000 0x100>, <0x10020718 0x4>;
- interrupts = <0 137 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "adc", "sclk";
clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
#io-channel-cells = <1>;
@@ -435,7 +437,7 @@
serial_0: serial@13800000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
- interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -444,7 +446,7 @@
serial_1: serial@13810000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13810000 0x100>;
- interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -453,7 +455,7 @@
serial_2: serial@13820000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
- interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -462,7 +464,7 @@
serial_3: serial@13830000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13830000 0x100>;
- interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART3>, <&cmu CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -473,7 +475,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13860000 0x100>;
- interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C0>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -486,7 +488,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13870000 0x100>;
- interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C1>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -499,7 +501,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13880000 0x100>;
- interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C2>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -512,7 +514,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13890000 0x100>;
- interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C3>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -525,7 +527,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138A0000 0x100>;
- interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C4>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -538,7 +540,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138B0000 0x100>;
- interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C5>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -551,7 +553,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138C0000 0x100>;
- interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C6>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -564,7 +566,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138D0000 0x100>;
- interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C7>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -575,7 +577,7 @@
spi_0: spi@13920000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13920000 0x100>;
- interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 7>, <&pdma0 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -591,7 +593,7 @@
spi_1: spi@13930000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13930000 0x100>;
- interrupts = <0 122 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma1 7>, <&pdma1 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -607,7 +609,7 @@
spi_2: spi@13940000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13940000 0x100>;
- interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 9>, <&pdma0 8>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -629,7 +631,7 @@
i2s0: i2s@3830000 {
compatible = "samsung,s5pv210-i2s";
reg = <0x03830000 0x100>;
- interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_audss EXYNOS_I2S_BUS>,
<&clock_audss EXYNOS_SCLK_I2S>;
clock-names = "iis", "i2s_opclk0";
@@ -644,21 +646,21 @@
pwm: pwm@139D0000 {
compatible = "samsung,exynos4210-pwm";
reg = <0x139D0000 0x1000>;
- interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>,
- <0 105 IRQ_TYPE_LEVEL_HIGH>,
- <0 106 IRQ_TYPE_LEVEL_HIGH>,
- <0 107 IRQ_TYPE_LEVEL_HIGH>,
- <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
#pwm-cells = <3>;
status = "disabled";
};
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>,
- <0 19 IRQ_TYPE_LEVEL_HIGH>,
- <0 20 IRQ_TYPE_LEVEL_HIGH>,
- <0 21 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Kukjin Kim <kgene-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Krzysztof Kozlowski
<krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Javier Martinez Canillas
<javier-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org>,
Catalin Marinas <catalin.marinas-5wv7dgnIgG8@public.gmane.org>,
Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH 5/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos4415
Date: Fri, 16 Sep 2016 23:42:00 +0200 [thread overview]
Message-ID: <1474062122-22720-6-git-send-email-krzk@kernel.org> (raw)
In-Reply-To: <1474062122-22720-1-git-send-email-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Replace hard-coded values of type of GIC interrupt and its flags with
respective macros from header to increase code readability
Signed-off-by: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
arch/arm/boot/dts/exynos4415-pinctrl.dtsi | 32 ++++-----
arch/arm/boot/dts/exynos4415.dtsi | 108 +++++++++++++++---------------
2 files changed, 71 insertions(+), 69 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi b/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
index 4863147be39a..f8d246cad22c 100644
--- a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
@@ -358,14 +358,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
- interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
- <0 33 IRQ_TYPE_LEVEL_HIGH>,
- <0 34 IRQ_TYPE_LEVEL_HIGH>,
- <0 35 IRQ_TYPE_LEVEL_HIGH>,
- <0 36 IRQ_TYPE_LEVEL_HIGH>,
- <0 37 IRQ_TYPE_LEVEL_HIGH>,
- <0 38 IRQ_TYPE_LEVEL_HIGH>,
- <0 39 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
@@ -375,14 +375,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
- interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>,
- <0 41 IRQ_TYPE_LEVEL_HIGH>,
- <0 42 IRQ_TYPE_LEVEL_HIGH>,
- <0 43 IRQ_TYPE_LEVEL_HIGH>,
- <0 44 IRQ_TYPE_LEVEL_HIGH>,
- <0 45 IRQ_TYPE_LEVEL_HIGH>,
- <0 46 IRQ_TYPE_LEVEL_HIGH>,
- <0 47 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
diff --git a/arch/arm/boot/dts/exynos4415.dtsi b/arch/arm/boot/dts/exynos4415.dtsi
index 2ad6b6f9a37b..8d887ac380ab 100644
--- a/arch/arm/boot/dts/exynos4415.dtsi
+++ b/arch/arm/boot/dts/exynos4415.dtsi
@@ -18,6 +18,7 @@
#include <dt-bindings/clock/exynos4415.h>
#include <dt-bindings/clock/exynos-audss-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
@@ -106,7 +107,7 @@
pinctrl_2: pinctrl@03860000 {
compatible = "samsung,exynos4415-pinctrl";
reg = <0x03860000 0x1000>;
- interrupts = <0 242 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
};
chipid@10000000 {
@@ -181,21 +182,22 @@
rtc: rtc@10070000 {
compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
- interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>, <0 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
mct@10050000 {
compatible = "samsung,exynos4210-mct";
reg = <0x10050000 0x800>;
- interrupts = <0 218 IRQ_TYPE_LEVEL_HIGH>,
- <0 219 IRQ_TYPE_LEVEL_HIGH>,
- <0 220 IRQ_TYPE_LEVEL_HIGH>,
- <0 221 IRQ_TYPE_LEVEL_HIGH>,
- <0 223 IRQ_TYPE_LEVEL_HIGH>,
- <0 226 IRQ_TYPE_LEVEL_HIGH>,
- <0 227 IRQ_TYPE_LEVEL_HIGH>,
- <0 228 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
clock-names = "fin_pll", "mct";
};
@@ -234,28 +236,28 @@
pinctrl_1: pinctrl@11000000 {
compatible = "samsung,exynos4415-pinctrl";
reg = <0x11000000 0x1000>;
- interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos4415-pinctrl";
reg = <0x11400000 0x1000>;
- interrupts = <0 240 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
};
fimd: fimd@11C00000 {
compatible = "samsung,exynos4415-fimd";
reg = <0x11C00000 0x30000>;
interrupt-names = "fifo", "vsync", "lcd_sys";
- interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>,
- <0 85 IRQ_TYPE_LEVEL_HIGH>,
- <0 86 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
clock-names = "sclk_fimd", "fimd";
samsung,power-domain = <&pd_lcd0>;
@@ -267,7 +269,7 @@
dsi_0: dsi@11C80000 {
compatible = "samsung,exynos4415-mipi-dsi";
reg = <0x11C80000 0x10000>;
- interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
samsung,phy-type = <0>;
samsung,power-domain = <&pd_lcd0>;
phys = <&mipi_phy 1>;
@@ -282,8 +284,8 @@
sysmmu_fimd0: sysmmu@11E20000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11e20000 0x1000>;
- interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>,
- <0 81 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sysmmu", "master";
clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>;
power-domains = <&pd_lcd0>;
@@ -293,7 +295,7 @@
hsotg: hsotg@12480000 {
compatible = "samsung,s3c6400-hsotg";
reg = <0x12480000 0x20000>;
- interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_USBDEVICE>;
clock-names = "otg";
phys = <&exynos_usbphy 0>;
@@ -304,7 +306,7 @@
mshc_0: mshc@12510000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12510000 0x1000>;
- interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
@@ -316,7 +318,7 @@
mshc_1: mshc@12520000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12520000 0x1000>;
- interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
@@ -328,7 +330,7 @@
mshc_2: mshc@12530000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12530000 0x1000>;
- interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
@@ -340,7 +342,7 @@
ehci: ehci@12580000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12580000 0x100>;
- interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_USBHOST>;
clock-names = "usbhost";
status = "disabled";
@@ -366,7 +368,7 @@
ohci: ohci@12590000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12590000 0x100>;
- interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_USBHOST>;
clock-names = "usbhost";
status = "disabled";
@@ -400,7 +402,7 @@
pdma0: pdma@12680000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
- interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -411,7 +413,7 @@
pdma1: pdma@12690000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
- interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -424,7 +426,7 @@
compatible = "samsung,exynos3250-adc",
"samsung,exynos-adc-v2";
reg = <0x126C0000 0x100>, <0x10020718 0x4>;
- interrupts = <0 137 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "adc", "sclk";
clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
#io-channel-cells = <1>;
@@ -435,7 +437,7 @@
serial_0: serial@13800000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
- interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -444,7 +446,7 @@
serial_1: serial@13810000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13810000 0x100>;
- interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -453,7 +455,7 @@
serial_2: serial@13820000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
- interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -462,7 +464,7 @@
serial_3: serial@13830000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13830000 0x100>;
- interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART3>, <&cmu CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -473,7 +475,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13860000 0x100>;
- interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C0>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -486,7 +488,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13870000 0x100>;
- interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C1>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -499,7 +501,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13880000 0x100>;
- interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C2>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -512,7 +514,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13890000 0x100>;
- interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C3>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -525,7 +527,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138A0000 0x100>;
- interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C4>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -538,7 +540,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138B0000 0x100>;
- interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C5>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -551,7 +553,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138C0000 0x100>;
- interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C6>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -564,7 +566,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138D0000 0x100>;
- interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C7>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -575,7 +577,7 @@
spi_0: spi@13920000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13920000 0x100>;
- interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 7>, <&pdma0 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -591,7 +593,7 @@
spi_1: spi@13930000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13930000 0x100>;
- interrupts = <0 122 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma1 7>, <&pdma1 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -607,7 +609,7 @@
spi_2: spi@13940000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13940000 0x100>;
- interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 9>, <&pdma0 8>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -629,7 +631,7 @@
i2s0: i2s@3830000 {
compatible = "samsung,s5pv210-i2s";
reg = <0x03830000 0x100>;
- interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_audss EXYNOS_I2S_BUS>,
<&clock_audss EXYNOS_SCLK_I2S>;
clock-names = "iis", "i2s_opclk0";
@@ -644,21 +646,21 @@
pwm: pwm@139D0000 {
compatible = "samsung,exynos4210-pwm";
reg = <0x139D0000 0x1000>;
- interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>,
- <0 105 IRQ_TYPE_LEVEL_HIGH>,
- <0 106 IRQ_TYPE_LEVEL_HIGH>,
- <0 107 IRQ_TYPE_LEVEL_HIGH>,
- <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
#pwm-cells = <3>;
status = "disabled";
};
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>,
- <0 19 IRQ_TYPE_LEVEL_HIGH>,
- <0 20 IRQ_TYPE_LEVEL_HIGH>,
- <0 21 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: krzk@kernel.org (Krzysztof Kozlowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos4415
Date: Fri, 16 Sep 2016 23:42:00 +0200 [thread overview]
Message-ID: <1474062122-22720-6-git-send-email-krzk@kernel.org> (raw)
In-Reply-To: <1474062122-22720-1-git-send-email-krzk@kernel.org>
Replace hard-coded values of type of GIC interrupt and its flags with
respective macros from header to increase code readability
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos4415-pinctrl.dtsi | 32 ++++-----
arch/arm/boot/dts/exynos4415.dtsi | 108 +++++++++++++++---------------
2 files changed, 71 insertions(+), 69 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi b/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
index 4863147be39a..f8d246cad22c 100644
--- a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
@@ -358,14 +358,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
- interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
- <0 33 IRQ_TYPE_LEVEL_HIGH>,
- <0 34 IRQ_TYPE_LEVEL_HIGH>,
- <0 35 IRQ_TYPE_LEVEL_HIGH>,
- <0 36 IRQ_TYPE_LEVEL_HIGH>,
- <0 37 IRQ_TYPE_LEVEL_HIGH>,
- <0 38 IRQ_TYPE_LEVEL_HIGH>,
- <0 39 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
@@ -375,14 +375,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
- interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>,
- <0 41 IRQ_TYPE_LEVEL_HIGH>,
- <0 42 IRQ_TYPE_LEVEL_HIGH>,
- <0 43 IRQ_TYPE_LEVEL_HIGH>,
- <0 44 IRQ_TYPE_LEVEL_HIGH>,
- <0 45 IRQ_TYPE_LEVEL_HIGH>,
- <0 46 IRQ_TYPE_LEVEL_HIGH>,
- <0 47 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
diff --git a/arch/arm/boot/dts/exynos4415.dtsi b/arch/arm/boot/dts/exynos4415.dtsi
index 2ad6b6f9a37b..8d887ac380ab 100644
--- a/arch/arm/boot/dts/exynos4415.dtsi
+++ b/arch/arm/boot/dts/exynos4415.dtsi
@@ -18,6 +18,7 @@
#include <dt-bindings/clock/exynos4415.h>
#include <dt-bindings/clock/exynos-audss-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
@@ -106,7 +107,7 @@
pinctrl_2: pinctrl at 03860000 {
compatible = "samsung,exynos4415-pinctrl";
reg = <0x03860000 0x1000>;
- interrupts = <0 242 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
};
chipid at 10000000 {
@@ -181,21 +182,22 @@
rtc: rtc at 10070000 {
compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
- interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>, <0 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
mct at 10050000 {
compatible = "samsung,exynos4210-mct";
reg = <0x10050000 0x800>;
- interrupts = <0 218 IRQ_TYPE_LEVEL_HIGH>,
- <0 219 IRQ_TYPE_LEVEL_HIGH>,
- <0 220 IRQ_TYPE_LEVEL_HIGH>,
- <0 221 IRQ_TYPE_LEVEL_HIGH>,
- <0 223 IRQ_TYPE_LEVEL_HIGH>,
- <0 226 IRQ_TYPE_LEVEL_HIGH>,
- <0 227 IRQ_TYPE_LEVEL_HIGH>,
- <0 228 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
clock-names = "fin_pll", "mct";
};
@@ -234,28 +236,28 @@
pinctrl_1: pinctrl at 11000000 {
compatible = "samsung,exynos4415-pinctrl";
reg = <0x11000000 0x1000>;
- interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_0: pinctrl at 11400000 {
compatible = "samsung,exynos4415-pinctrl";
reg = <0x11400000 0x1000>;
- interrupts = <0 240 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
};
fimd: fimd at 11C00000 {
compatible = "samsung,exynos4415-fimd";
reg = <0x11C00000 0x30000>;
interrupt-names = "fifo", "vsync", "lcd_sys";
- interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>,
- <0 85 IRQ_TYPE_LEVEL_HIGH>,
- <0 86 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
clock-names = "sclk_fimd", "fimd";
samsung,power-domain = <&pd_lcd0>;
@@ -267,7 +269,7 @@
dsi_0: dsi at 11C80000 {
compatible = "samsung,exynos4415-mipi-dsi";
reg = <0x11C80000 0x10000>;
- interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
samsung,phy-type = <0>;
samsung,power-domain = <&pd_lcd0>;
phys = <&mipi_phy 1>;
@@ -282,8 +284,8 @@
sysmmu_fimd0: sysmmu at 11E20000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11e20000 0x1000>;
- interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>,
- <0 81 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sysmmu", "master";
clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>;
power-domains = <&pd_lcd0>;
@@ -293,7 +295,7 @@
hsotg: hsotg at 12480000 {
compatible = "samsung,s3c6400-hsotg";
reg = <0x12480000 0x20000>;
- interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_USBDEVICE>;
clock-names = "otg";
phys = <&exynos_usbphy 0>;
@@ -304,7 +306,7 @@
mshc_0: mshc at 12510000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12510000 0x1000>;
- interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
@@ -316,7 +318,7 @@
mshc_1: mshc at 12520000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12520000 0x1000>;
- interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
@@ -328,7 +330,7 @@
mshc_2: mshc at 12530000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12530000 0x1000>;
- interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
@@ -340,7 +342,7 @@
ehci: ehci at 12580000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12580000 0x100>;
- interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_USBHOST>;
clock-names = "usbhost";
status = "disabled";
@@ -366,7 +368,7 @@
ohci: ohci at 12590000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12590000 0x100>;
- interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_USBHOST>;
clock-names = "usbhost";
status = "disabled";
@@ -400,7 +402,7 @@
pdma0: pdma at 12680000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
- interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -411,7 +413,7 @@
pdma1: pdma at 12690000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
- interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -424,7 +426,7 @@
compatible = "samsung,exynos3250-adc",
"samsung,exynos-adc-v2";
reg = <0x126C0000 0x100>, <0x10020718 0x4>;
- interrupts = <0 137 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "adc", "sclk";
clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
#io-channel-cells = <1>;
@@ -435,7 +437,7 @@
serial_0: serial at 13800000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
- interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -444,7 +446,7 @@
serial_1: serial at 13810000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13810000 0x100>;
- interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -453,7 +455,7 @@
serial_2: serial at 13820000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
- interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -462,7 +464,7 @@
serial_3: serial at 13830000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13830000 0x100>;
- interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART3>, <&cmu CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -473,7 +475,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13860000 0x100>;
- interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C0>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -486,7 +488,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13870000 0x100>;
- interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C1>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -499,7 +501,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13880000 0x100>;
- interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C2>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -512,7 +514,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13890000 0x100>;
- interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C3>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -525,7 +527,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138A0000 0x100>;
- interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C4>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -538,7 +540,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138B0000 0x100>;
- interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C5>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -551,7 +553,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138C0000 0x100>;
- interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C6>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -564,7 +566,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138D0000 0x100>;
- interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C7>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -575,7 +577,7 @@
spi_0: spi at 13920000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13920000 0x100>;
- interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 7>, <&pdma0 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -591,7 +593,7 @@
spi_1: spi at 13930000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13930000 0x100>;
- interrupts = <0 122 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma1 7>, <&pdma1 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -607,7 +609,7 @@
spi_2: spi at 13940000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13940000 0x100>;
- interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 9>, <&pdma0 8>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -629,7 +631,7 @@
i2s0: i2s at 3830000 {
compatible = "samsung,s5pv210-i2s";
reg = <0x03830000 0x100>;
- interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_audss EXYNOS_I2S_BUS>,
<&clock_audss EXYNOS_SCLK_I2S>;
clock-names = "iis", "i2s_opclk0";
@@ -644,21 +646,21 @@
pwm: pwm at 139D0000 {
compatible = "samsung,exynos4210-pwm";
reg = <0x139D0000 0x1000>;
- interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>,
- <0 105 IRQ_TYPE_LEVEL_HIGH>,
- <0 106 IRQ_TYPE_LEVEL_HIGH>,
- <0 107 IRQ_TYPE_LEVEL_HIGH>,
- <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
#pwm-cells = <3>;
status = "disabled";
};
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>,
- <0 19 IRQ_TYPE_LEVEL_HIGH>,
- <0 20 IRQ_TYPE_LEVEL_HIGH>,
- <0 21 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
--
2.7.4
next prev parent reply other threads:[~2016-09-16 21:43 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-16 21:41 [PATCH 0/7] ARM: dts: exynos Use human-friendly symbols for interrupt properties Krzysztof Kozlowski
2016-09-16 21:41 ` Krzysztof Kozlowski
2016-09-16 21:41 ` Krzysztof Kozlowski
2016-09-16 21:41 ` [PATCH 1/7] arm64: dts: exynos: Use human-friendly symbols for interrupt properties in exynos7 Krzysztof Kozlowski
2016-09-16 21:41 ` Krzysztof Kozlowski
2016-09-16 21:41 ` [PATCH 2/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos3250 Krzysztof Kozlowski
2016-09-16 21:41 ` Krzysztof Kozlowski
2016-09-16 21:41 ` [PATCH 3/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos4 Krzysztof Kozlowski
2016-09-16 21:41 ` Krzysztof Kozlowski
2016-09-16 21:41 ` Krzysztof Kozlowski
2016-09-16 21:41 ` [PATCH 4/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5 Krzysztof Kozlowski
2016-09-16 21:41 ` Krzysztof Kozlowski
2016-09-16 21:41 ` Krzysztof Kozlowski
2016-09-18 15:20 ` Javier Martinez Canillas
2016-09-18 15:20 ` Javier Martinez Canillas
2016-09-16 21:42 ` Krzysztof Kozlowski [this message]
2016-09-16 21:42 ` [PATCH 5/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos4415 Krzysztof Kozlowski
2016-09-16 21:42 ` Krzysztof Kozlowski
2016-09-16 21:42 ` [PATCH 6/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5260 Krzysztof Kozlowski
2016-09-16 21:42 ` Krzysztof Kozlowski
2016-09-16 21:42 ` [PATCH 7/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5440 Krzysztof Kozlowski
2016-09-16 21:42 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1474062122-22720-6-git-send-email-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=javier@osg.samsung.com \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.