All of lore.kernel.org
 help / color / mirror / Atom feed
From: kernel@martin.sperl.org
To: Zhang Rui <rui.zhang@intel.com>,
	Eduardo Valentin <edubezval@gmail.com>,
	Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Stephen Warren <swarren@wwwdotorg.org>,
	Lee Jones <lee@kernel.org>, Eric Anholt <eric@anholt.net>,
	Russell King <linux@arm.linux.org.uk>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will.deacon@arm.com>,
	Stefan Wahren <stefan.wahren@i2se.com>,
	linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-rpi-kernel@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org
Cc: Martin Sperl <kernel@martin.sperl.org>
Subject: [PATCH V7 3/6] ARM: bcm2835: dts: add thermal node to device-tree of bcm283x
Date: Wed, 21 Sep 2016 08:23:44 +0000	[thread overview]
Message-ID: <1474446227-1147-4-git-send-email-kernel@martin.sperl.org> (raw)
In-Reply-To: <1474446227-1147-1-git-send-email-kernel@martin.sperl.org>

From: Martin Sperl <kernel@martin.sperl.org>

Add the node for the thermal sensor of the bcm2835-soc
to the device tree.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>

Changelog:
V1 -> V5: generic settings is shared in bcm283x.dtsi, but disabled
	  moved the compatible string to the SOC specific dtsi
            for arm and arm64
V5 -> V6: fix remove 0x prefix from thermal@0x7e212000

Note: there is no arm/boot/dts/bcm2837.dtsi as of now,
      so the 32-bit rpi3 dt is not modified.
---
 arch/arm/boot/dts/bcm2835.dtsi | 6 ++++++
 arch/arm/boot/dts/bcm2836.dtsi | 6 ++++++
 arch/arm/boot/dts/bcm283x.dtsi | 7 +++++++
 3 files changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index a78759e..0890d97 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -23,3 +23,9 @@
 		};
 	};
 };
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2835-thermal";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
index 9d0651d..519a44f 100644
--- a/arch/arm/boot/dts/bcm2836.dtsi
+++ b/arch/arm/boot/dts/bcm2836.dtsi
@@ -76,3 +76,9 @@
 	interrupt-parent = <&local_intc>;
 	interrupts = <8>;
 };
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2836-thermal";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index b982522..d9acf21 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -186,6 +186,13 @@
 			interrupts = <2 14>; /* pwa1 */
 		};
 
+		thermal: thermal@7e212000 {
+			compatible = "brcm,bcm2835-thermal";
+			reg = <0x7e212000 0x8>;
+			clocks = <&clocks BCM2835_CLOCK_TSENS>;
+			status = "disabled";
+		};
+
 		aux: aux@0x7e215000 {
 			compatible = "brcm,bcm2835-aux";
 			#clock-cells = <1>;
-- 
2.1.4


WARNING: multiple messages have this Message-ID (diff)
From: kernel@martin.sperl.org (kernel at martin.sperl.org)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V7 3/6] ARM: bcm2835: dts: add thermal node to device-tree of bcm283x
Date: Wed, 21 Sep 2016 08:23:44 +0000	[thread overview]
Message-ID: <1474446227-1147-4-git-send-email-kernel@martin.sperl.org> (raw)
In-Reply-To: <1474446227-1147-1-git-send-email-kernel@martin.sperl.org>

From: Martin Sperl <kernel@martin.sperl.org>

Add the node for the thermal sensor of the bcm2835-soc
to the device tree.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>

Changelog:
V1 -> V5: generic settings is shared in bcm283x.dtsi, but disabled
	  moved the compatible string to the SOC specific dtsi
            for arm and arm64
V5 -> V6: fix remove 0x prefix from thermal at 0x7e212000

Note: there is no arm/boot/dts/bcm2837.dtsi as of now,
      so the 32-bit rpi3 dt is not modified.
---
 arch/arm/boot/dts/bcm2835.dtsi | 6 ++++++
 arch/arm/boot/dts/bcm2836.dtsi | 6 ++++++
 arch/arm/boot/dts/bcm283x.dtsi | 7 +++++++
 3 files changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index a78759e..0890d97 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -23,3 +23,9 @@
 		};
 	};
 };
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2835-thermal";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
index 9d0651d..519a44f 100644
--- a/arch/arm/boot/dts/bcm2836.dtsi
+++ b/arch/arm/boot/dts/bcm2836.dtsi
@@ -76,3 +76,9 @@
 	interrupt-parent = <&local_intc>;
 	interrupts = <8>;
 };
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2836-thermal";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index b982522..d9acf21 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -186,6 +186,13 @@
 			interrupts = <2 14>; /* pwa1 */
 		};
 
+		thermal: thermal at 7e212000 {
+			compatible = "brcm,bcm2835-thermal";
+			reg = <0x7e212000 0x8>;
+			clocks = <&clocks BCM2835_CLOCK_TSENS>;
+			status = "disabled";
+		};
+
 		aux: aux at 0x7e215000 {
 			compatible = "brcm,bcm2835-aux";
 			#clock-cells = <1>;
-- 
2.1.4

  parent reply	other threads:[~2016-09-21  8:23 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-21  8:23 [PATCH V7 0/6] thermal: bcm2835: add thermal driver kernel-TqfNSX0MhmxHKSADF0wUEw
2016-09-21  8:23 ` kernel at martin.sperl.org
2016-09-21  8:23 ` [PATCH V7 1/6] dt: bindings: add thermal device driver for bcm2835 kernel
2016-09-21  8:23   ` kernel at martin.sperl.org
     [not found] ` <1474446227-1147-1-git-send-email-kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org>
2016-09-21  8:23   ` [PATCH V7 2/6] thermal: bcm2835: add thermal driver for bcm2835 soc kernel-TqfNSX0MhmxHKSADF0wUEw
2016-09-21  8:23     ` kernel at martin.sperl.org
2016-09-28 21:10     ` Eric Anholt
2016-09-28 21:10       ` Eric Anholt
     [not found]       ` <87twczg27x.fsf-omZaPlIz5HhaEpDpdNBo/KxOck334EZe@public.gmane.org>
2016-10-20 18:57         ` Stefan Wahren
2016-10-20 18:57           ` Stefan Wahren
2016-10-24 16:21       ` Stefan Wahren
2016-10-24 16:21         ` Stefan Wahren
2016-10-24 16:38         ` Eric Anholt
2016-10-24 16:38           ` Eric Anholt
2016-10-24 18:25           ` Stefan Wahren
2016-10-24 18:25             ` Stefan Wahren
     [not found]             ` <1190898538.120930.02d69662-0b1a-447d-9c29-782aec7a1189.open-xchange-7tX72C7vayboQLBSYMtkGA@public.gmane.org>
2016-10-25  2:47               ` Zhang Rui
2016-10-25  2:47                 ` Zhang Rui
2016-10-31 21:06                 ` Eric Anholt
2016-10-31 21:06                   ` Eric Anholt
2016-11-02 10:14           ` kernel
2016-11-02 10:14             ` kernel at martin.sperl.org
2016-09-21  8:23   ` [PATCH V7 6/6] ARM64: bcm2835: add thermal driver to default_config kernel-TqfNSX0MhmxHKSADF0wUEw
2016-09-21  8:23     ` kernel at martin.sperl.org
2016-09-21  8:23 ` kernel [this message]
2016-09-21  8:23   ` [PATCH V7 3/6] ARM: bcm2835: dts: add thermal node to device-tree of bcm283x kernel at martin.sperl.org
2016-09-21  8:23 ` [PATCH V7 4/6] ARM64: bcm2835: dts: add thermal node to device-tree of bcm2837 kernel
2016-09-21  8:23   ` kernel at martin.sperl.org
2016-09-21  8:23 ` [PATCH V7 5/6] ARM: bcm2835: add thermal driver to default_config kernel
2016-09-21  8:23   ` kernel at martin.sperl.org

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1474446227-1147-4-git-send-email-kernel@martin.sperl.org \
    --to=kernel@martin.sperl.org \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=edubezval@gmail.com \
    --cc=eric@anholt.net \
    --cc=f.fainelli@gmail.com \
    --cc=lee@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=stefan.wahren@i2se.com \
    --cc=swarren@wwwdotorg.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.