From: Robert Jarzmik <robert.jarzmik@free.fr>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Daniel Mack <daniel@zonque.org>,
Haojian Zhuang <haojian.zhuang@gmail.com>,
Robert Jarzmik <robert.jarzmik@free.fr>,
Jonathan Cameron <jic23@cam.ac.uk>,
David Howells <dhowells@redhat.com>,
Nicolas Pitre <nico@fluxnic.net>,
"David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-am33-list@redhat.com
Subject: [PATCH v3 2/4] net: smc91x: isolate u16 writes alignment workaround
Date: Mon, 17 Oct 2016 21:45:30 +0200 [thread overview]
Message-ID: <1476733532-29716-3-git-send-email-robert.jarzmik@free.fr> (raw)
In-Reply-To: <1476733532-29716-1-git-send-email-robert.jarzmik@free.fr>
Writes to u16 has a special handling on 3 PXA platforms, where the
hardware wiring forces these writes to be u32 aligned.
This patch isolates this handling for PXA platforms as before, but
enables this "workaround" to be set up dynamically, which will be the
case in device-tree build types.
This patch was tested on 2 PXA platforms : mainstone, which relies on
the workaround, and lubbock, which doesn't.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
--
Since v2: fixed arch/mn10300 case
removed machine_is_*() calls
---
arch/mn10300/unit-asb2303/include/unit/smc91111.h | 2 +-
drivers/net/ethernet/smsc/smc91x.c | 3 +-
drivers/net/ethernet/smsc/smc91x.h | 82 ++++++++++++-----------
3 files changed, 47 insertions(+), 40 deletions(-)
diff --git a/arch/mn10300/unit-asb2303/include/unit/smc91111.h b/arch/mn10300/unit-asb2303/include/unit/smc91111.h
index dd456e9c513f..dd4e2946438e 100644
--- a/arch/mn10300/unit-asb2303/include/unit/smc91111.h
+++ b/arch/mn10300/unit-asb2303/include/unit/smc91111.h
@@ -30,7 +30,7 @@
#if SMC_CAN_USE_16BIT
#define SMC_inw(a, r) inw((unsigned long) ((a) + (r)))
-#define SMC_outw(v, a, r) outw(v, (unsigned long) ((a) + (r)))
+#define SMC_outw(lp, v, a, r) outw(v, (unsigned long) ((a) + (r)))
#define SMC_insw(a, r, p, l) insw((unsigned long) ((a) + (r)), (p), (l))
#define SMC_outsw(a, r, p, l) outsw((unsigned long) ((a) + (r)), (p), (l))
#endif
diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
index 9b4780f87863..705d99b2d947 100644
--- a/drivers/net/ethernet/smsc/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -602,7 +602,8 @@ static void smc_hardware_send_pkt(unsigned long data)
SMC_PUSH_DATA(lp, buf, len & ~1);
/* Send final ctl word with the last byte if there is one */
- SMC_outw(((len & 1) ? (0x2000 | buf[len-1]) : 0), ioaddr, DATA_REG(lp));
+ SMC_outw(lp, ((len & 1) ? (0x2000 | buf[len - 1]) : 0), ioaddr,
+ DATA_REG(lp));
/*
* If THROTTLE_TX_PKTS is set, we stop the queue here. This will
diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h
index ea8465467469..45e6b81a6a92 100644
--- a/drivers/net/ethernet/smsc/smc91x.h
+++ b/drivers/net/ethernet/smsc/smc91x.h
@@ -63,8 +63,6 @@
#if defined(CONFIG_ARM)
-#include <asm/mach-types.h>
-
/* Now the bus width is specified in the platform data
* pretend here to support all I/O access types
*/
@@ -86,11 +84,11 @@
#define SMC_inl(a, r) readl((a) + (r))
#define SMC_outb(v, a, r) writeb(v, (a) + (r))
-#define SMC_outw(v, a, r) \
+#define SMC_outw(lp, v, a, r) \
do { \
unsigned int __v = v, __smc_r = r; \
if (SMC_16BIT(lp)) \
- __SMC_outw(__v, a, __smc_r); \
+ __SMC_outw(lp, __v, a, __smc_r); \
else if (SMC_8BIT(lp)) \
SMC_outw_b(__v, a, __smc_r); \
else \
@@ -107,10 +105,10 @@
#define SMC_IRQ_FLAGS (-1) /* from resource */
/* We actually can't write halfwords properly if not word aligned */
-static inline void __SMC_outw(u16 val, void __iomem *ioaddr, int reg)
+static inline void _SMC_outw_align4(u16 val, void __iomem *ioaddr, int reg,
+ bool use_align4_workaround)
{
- if ((machine_is_mainstone() || machine_is_stargate2() ||
- machine_is_pxa_idp()) && reg & 2) {
+ if (use_align4_workaround) {
unsigned int v = val << 16;
v |= readl(ioaddr + (reg & ~2)) & 0xffff;
writel(v, ioaddr + (reg & ~2));
@@ -119,6 +117,12 @@ static inline void __SMC_outw(u16 val, void __iomem *ioaddr, int reg)
}
}
+#define __SMC_outw(lp, v, a, r) \
+ _SMC_outw_align4((v), (a), (r), \
+ IS_BUILTIN(CONFIG_ARCH_PXA) && ((r) & 2) && \
+ (lp)->cfg.pxa_u16_align4)
+
+
#elif defined(CONFIG_SH_SH4202_MICRODEV)
#define SMC_CAN_USE_8BIT 0
@@ -129,7 +133,7 @@ static inline void __SMC_outw(u16 val, void __iomem *ioaddr, int reg)
#define SMC_inw(a, r) inw((a) + (r) - 0xa0000000)
#define SMC_inl(a, r) inl((a) + (r) - 0xa0000000)
#define SMC_outb(v, a, r) outb(v, (a) + (r) - 0xa0000000)
-#define SMC_outw(v, a, r) outw(v, (a) + (r) - 0xa0000000)
+#define SMC_outw(lp, v, a, r) outw(v, (a) + (r) - 0xa0000000)
#define SMC_outl(v, a, r) outl(v, (a) + (r) - 0xa0000000)
#define SMC_insl(a, r, p, l) insl((a) + (r) - 0xa0000000, p, l)
#define SMC_outsl(a, r, p, l) outsl((a) + (r) - 0xa0000000, p, l)
@@ -147,7 +151,7 @@ static inline void __SMC_outw(u16 val, void __iomem *ioaddr, int reg)
#define SMC_inb(a, r) inb(((u32)a) + (r))
#define SMC_inw(a, r) inw(((u32)a) + (r))
#define SMC_outb(v, a, r) outb(v, ((u32)a) + (r))
-#define SMC_outw(v, a, r) outw(v, ((u32)a) + (r))
+#define SMC_outw(lp, v, a, r) outw(v, ((u32)a) + (r))
#define SMC_insw(a, r, p, l) insw(((u32)a) + (r), p, l)
#define SMC_outsw(a, r, p, l) outsw(((u32)a) + (r), p, l)
@@ -175,7 +179,7 @@ static inline void __SMC_outw(u16 val, void __iomem *ioaddr, int reg)
#define SMC_inw(a, r) readw((a) + (r))
#define SMC_inl(a, r) readl((a) + (r))
#define SMC_outb(v, a, r) writeb(v, (a) + (r))
-#define SMC_outw(v, a, r) writew(v, (a) + (r))
+#define SMC_outw(lp, v, a, r) writew(v, (a) + (r))
#define SMC_outl(v, a, r) writel(v, (a) + (r))
#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
@@ -207,7 +211,7 @@ static inline void mcf_outsw(void *a, unsigned char *p, int l)
}
#define SMC_inw(a, r) _swapw(readw((a) + (r)))
-#define SMC_outw(v, a, r) writew(_swapw(v), (a) + (r))
+#define SMC_outw(lp, v, a, r) writew(_swapw(v), (a) + (r))
#define SMC_insw(a, r, p, l) mcf_insw(a + r, p, l)
#define SMC_outsw(a, r, p, l) mcf_outsw(a + r, p, l)
@@ -241,7 +245,7 @@ static inline void mcf_outsw(void *a, unsigned char *p, int l)
#define SMC_inw(a, r) ioread16((a) + (r))
#define SMC_inl(a, r) ioread32((a) + (r))
#define SMC_outb(v, a, r) iowrite8(v, (a) + (r))
-#define SMC_outw(v, a, r) iowrite16(v, (a) + (r))
+#define SMC_outw(lp, v, a, r) iowrite16(v, (a) + (r))
#define SMC_outl(v, a, r) iowrite32(v, (a) + (r))
#define SMC_insw(a, r, p, l) ioread16_rep((a) + (r), p, l)
#define SMC_outsw(a, r, p, l) iowrite16_rep((a) + (r), p, l)
@@ -303,6 +307,8 @@ struct smc_local {
/* the low address lines on some platforms aren't connected... */
int io_shift;
+ /* on some platforms a u16 write must be 4-bytes aligned */
+ bool half_word_align4;
struct smc91x_platdata cfg;
};
@@ -457,7 +463,7 @@ smc_pxa_dma_insw(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma,
#if ! SMC_CAN_USE_16BIT
-#define SMC_outw(x, ioaddr, reg) SMC_outw_b(x, ioaddr, reg)
+#define SMC_outw(lp, x, ioaddr, reg) SMC_outw_b(x, ioaddr, reg)
#define SMC_inw(ioaddr, reg) SMC_inw_b(ioaddr, reg)
#define SMC_insw(a, r, p, l) BUG()
#define SMC_outsw(a, r, p, l) BUG()
@@ -909,7 +915,7 @@ static const char * chip_ids[ 16 ] = {
else if (SMC_8BIT(lp)) \
SMC_outb(x, ioaddr, PN_REG(lp)); \
else \
- SMC_outw(x, ioaddr, PN_REG(lp)); \
+ SMC_outw(lp, x, ioaddr, PN_REG(lp)); \
} while (0)
#define SMC_GET_AR(lp) \
@@ -937,7 +943,7 @@ static const char * chip_ids[ 16 ] = {
int __mask; \
local_irq_save(__flags); \
__mask = SMC_inw(ioaddr, INT_REG(lp)) & ~0xff; \
- SMC_outw(__mask | (x), ioaddr, INT_REG(lp)); \
+ SMC_outw(lp, __mask | (x), ioaddr, INT_REG(lp)); \
local_irq_restore(__flags); \
} \
} while (0)
@@ -951,7 +957,7 @@ static const char * chip_ids[ 16 ] = {
if (SMC_8BIT(lp)) \
SMC_outb(x, ioaddr, IM_REG(lp)); \
else \
- SMC_outw((x) << 8, ioaddr, INT_REG(lp)); \
+ SMC_outw(lp, (x) << 8, ioaddr, INT_REG(lp)); \
} while (0)
#define SMC_CURRENT_BANK(lp) SMC_inw(ioaddr, BANK_SELECT)
@@ -961,22 +967,22 @@ static const char * chip_ids[ 16 ] = {
if (SMC_MUST_ALIGN_WRITE(lp)) \
SMC_outl((x)<<16, ioaddr, 12<<SMC_IO_SHIFT); \
else \
- SMC_outw(x, ioaddr, BANK_SELECT); \
+ SMC_outw(lp, x, ioaddr, BANK_SELECT); \
} while (0)
#define SMC_GET_BASE(lp) SMC_inw(ioaddr, BASE_REG(lp))
-#define SMC_SET_BASE(lp, x) SMC_outw(x, ioaddr, BASE_REG(lp))
+#define SMC_SET_BASE(lp, x) SMC_outw(lp, x, ioaddr, BASE_REG(lp))
#define SMC_GET_CONFIG(lp) SMC_inw(ioaddr, CONFIG_REG(lp))
-#define SMC_SET_CONFIG(lp, x) SMC_outw(x, ioaddr, CONFIG_REG(lp))
+#define SMC_SET_CONFIG(lp, x) SMC_outw(lp, x, ioaddr, CONFIG_REG(lp))
#define SMC_GET_COUNTER(lp) SMC_inw(ioaddr, COUNTER_REG(lp))
#define SMC_GET_CTL(lp) SMC_inw(ioaddr, CTL_REG(lp))
-#define SMC_SET_CTL(lp, x) SMC_outw(x, ioaddr, CTL_REG(lp))
+#define SMC_SET_CTL(lp, x) SMC_outw(lp, x, ioaddr, CTL_REG(lp))
#define SMC_GET_MII(lp) SMC_inw(ioaddr, MII_REG(lp))
@@ -987,20 +993,20 @@ static const char * chip_ids[ 16 ] = {
if (SMC_MUST_ALIGN_WRITE(lp)) \
SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 8, 1)); \
else \
- SMC_outw(x, ioaddr, GP_REG(lp)); \
+ SMC_outw(lp, x, ioaddr, GP_REG(lp)); \
} while (0)
-#define SMC_SET_MII(lp, x) SMC_outw(x, ioaddr, MII_REG(lp))
+#define SMC_SET_MII(lp, x) SMC_outw(lp, x, ioaddr, MII_REG(lp))
#define SMC_GET_MIR(lp) SMC_inw(ioaddr, MIR_REG(lp))
-#define SMC_SET_MIR(lp, x) SMC_outw(x, ioaddr, MIR_REG(lp))
+#define SMC_SET_MIR(lp, x) SMC_outw(lp, x, ioaddr, MIR_REG(lp))
#define SMC_GET_MMU_CMD(lp) SMC_inw(ioaddr, MMU_CMD_REG(lp))
-#define SMC_SET_MMU_CMD(lp, x) SMC_outw(x, ioaddr, MMU_CMD_REG(lp))
+#define SMC_SET_MMU_CMD(lp, x) SMC_outw(lp, x, ioaddr, MMU_CMD_REG(lp))
-#define SMC_GET_FIFO(lp) SMC_inw(ioaddr, FIFO_REG(lp))
+#define SMC_GET_FIFO(lp) SMC_inw(ioaddr, FIFO_REG(lp))
#define SMC_GET_PTR(lp) SMC_inw(ioaddr, PTR_REG(lp))
@@ -1009,14 +1015,14 @@ static const char * chip_ids[ 16 ] = {
if (SMC_MUST_ALIGN_WRITE(lp)) \
SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 4, 2)); \
else \
- SMC_outw(x, ioaddr, PTR_REG(lp)); \
+ SMC_outw(lp, x, ioaddr, PTR_REG(lp)); \
} while (0)
#define SMC_GET_EPH_STATUS(lp) SMC_inw(ioaddr, EPH_STATUS_REG(lp))
#define SMC_GET_RCR(lp) SMC_inw(ioaddr, RCR_REG(lp))
-#define SMC_SET_RCR(lp, x) SMC_outw(x, ioaddr, RCR_REG(lp))
+#define SMC_SET_RCR(lp, x) SMC_outw(lp, x, ioaddr, RCR_REG(lp))
#define SMC_GET_REV(lp) SMC_inw(ioaddr, REV_REG(lp))
@@ -1027,12 +1033,12 @@ static const char * chip_ids[ 16 ] = {
if (SMC_MUST_ALIGN_WRITE(lp)) \
SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 8, 0)); \
else \
- SMC_outw(x, ioaddr, RPC_REG(lp)); \
+ SMC_outw(lp, x, ioaddr, RPC_REG(lp)); \
} while (0)
#define SMC_GET_TCR(lp) SMC_inw(ioaddr, TCR_REG(lp))
-#define SMC_SET_TCR(lp, x) SMC_outw(x, ioaddr, TCR_REG(lp))
+#define SMC_SET_TCR(lp, x) SMC_outw(lp, x, ioaddr, TCR_REG(lp))
#ifndef SMC_GET_MAC_ADDR
#define SMC_GET_MAC_ADDR(lp, addr) \
@@ -1049,18 +1055,18 @@ static const char * chip_ids[ 16 ] = {
#define SMC_SET_MAC_ADDR(lp, addr) \
do { \
- SMC_outw(addr[0]|(addr[1] << 8), ioaddr, ADDR0_REG(lp)); \
- SMC_outw(addr[2]|(addr[3] << 8), ioaddr, ADDR1_REG(lp)); \
- SMC_outw(addr[4]|(addr[5] << 8), ioaddr, ADDR2_REG(lp)); \
+ SMC_outw(lp, addr[0] | (addr[1] << 8), ioaddr, ADDR0_REG(lp)); \
+ SMC_outw(lp, addr[2] | (addr[3] << 8), ioaddr, ADDR1_REG(lp)); \
+ SMC_outw(lp, addr[4] | (addr[5] << 8), ioaddr, ADDR2_REG(lp)); \
} while (0)
#define SMC_SET_MCAST(lp, x) \
do { \
const unsigned char *mt = (x); \
- SMC_outw(mt[0] | (mt[1] << 8), ioaddr, MCAST_REG1(lp)); \
- SMC_outw(mt[2] | (mt[3] << 8), ioaddr, MCAST_REG2(lp)); \
- SMC_outw(mt[4] | (mt[5] << 8), ioaddr, MCAST_REG3(lp)); \
- SMC_outw(mt[6] | (mt[7] << 8), ioaddr, MCAST_REG4(lp)); \
+ SMC_outw(lp, mt[0] | (mt[1] << 8), ioaddr, MCAST_REG1(lp)); \
+ SMC_outw(lp, mt[2] | (mt[3] << 8), ioaddr, MCAST_REG2(lp)); \
+ SMC_outw(lp, mt[4] | (mt[5] << 8), ioaddr, MCAST_REG3(lp)); \
+ SMC_outw(lp, mt[6] | (mt[7] << 8), ioaddr, MCAST_REG4(lp)); \
} while (0)
#define SMC_PUT_PKT_HDR(lp, status, length) \
@@ -1069,8 +1075,8 @@ static const char * chip_ids[ 16 ] = {
SMC_outl((status) | (length)<<16, ioaddr, \
DATA_REG(lp)); \
else { \
- SMC_outw(status, ioaddr, DATA_REG(lp)); \
- SMC_outw(length, ioaddr, DATA_REG(lp)); \
+ SMC_outw(lp, status, ioaddr, DATA_REG(lp)); \
+ SMC_outw(lp, length, ioaddr, DATA_REG(lp)); \
} \
} while (0)
--
2.1.4
WARNING: multiple messages have this Message-ID (diff)
From: robert.jarzmik@free.fr (Robert Jarzmik)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/4] net: smc91x: isolate u16 writes alignment workaround
Date: Mon, 17 Oct 2016 21:45:30 +0200 [thread overview]
Message-ID: <1476733532-29716-3-git-send-email-robert.jarzmik@free.fr> (raw)
In-Reply-To: <1476733532-29716-1-git-send-email-robert.jarzmik@free.fr>
Writes to u16 has a special handling on 3 PXA platforms, where the
hardware wiring forces these writes to be u32 aligned.
This patch isolates this handling for PXA platforms as before, but
enables this "workaround" to be set up dynamically, which will be the
case in device-tree build types.
This patch was tested on 2 PXA platforms : mainstone, which relies on
the workaround, and lubbock, which doesn't.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
--
Since v2: fixed arch/mn10300 case
removed machine_is_*() calls
---
arch/mn10300/unit-asb2303/include/unit/smc91111.h | 2 +-
drivers/net/ethernet/smsc/smc91x.c | 3 +-
drivers/net/ethernet/smsc/smc91x.h | 82 ++++++++++++-----------
3 files changed, 47 insertions(+), 40 deletions(-)
diff --git a/arch/mn10300/unit-asb2303/include/unit/smc91111.h b/arch/mn10300/unit-asb2303/include/unit/smc91111.h
index dd456e9c513f..dd4e2946438e 100644
--- a/arch/mn10300/unit-asb2303/include/unit/smc91111.h
+++ b/arch/mn10300/unit-asb2303/include/unit/smc91111.h
@@ -30,7 +30,7 @@
#if SMC_CAN_USE_16BIT
#define SMC_inw(a, r) inw((unsigned long) ((a) + (r)))
-#define SMC_outw(v, a, r) outw(v, (unsigned long) ((a) + (r)))
+#define SMC_outw(lp, v, a, r) outw(v, (unsigned long) ((a) + (r)))
#define SMC_insw(a, r, p, l) insw((unsigned long) ((a) + (r)), (p), (l))
#define SMC_outsw(a, r, p, l) outsw((unsigned long) ((a) + (r)), (p), (l))
#endif
diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
index 9b4780f87863..705d99b2d947 100644
--- a/drivers/net/ethernet/smsc/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -602,7 +602,8 @@ static void smc_hardware_send_pkt(unsigned long data)
SMC_PUSH_DATA(lp, buf, len & ~1);
/* Send final ctl word with the last byte if there is one */
- SMC_outw(((len & 1) ? (0x2000 | buf[len-1]) : 0), ioaddr, DATA_REG(lp));
+ SMC_outw(lp, ((len & 1) ? (0x2000 | buf[len - 1]) : 0), ioaddr,
+ DATA_REG(lp));
/*
* If THROTTLE_TX_PKTS is set, we stop the queue here. This will
diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h
index ea8465467469..45e6b81a6a92 100644
--- a/drivers/net/ethernet/smsc/smc91x.h
+++ b/drivers/net/ethernet/smsc/smc91x.h
@@ -63,8 +63,6 @@
#if defined(CONFIG_ARM)
-#include <asm/mach-types.h>
-
/* Now the bus width is specified in the platform data
* pretend here to support all I/O access types
*/
@@ -86,11 +84,11 @@
#define SMC_inl(a, r) readl((a) + (r))
#define SMC_outb(v, a, r) writeb(v, (a) + (r))
-#define SMC_outw(v, a, r) \
+#define SMC_outw(lp, v, a, r) \
do { \
unsigned int __v = v, __smc_r = r; \
if (SMC_16BIT(lp)) \
- __SMC_outw(__v, a, __smc_r); \
+ __SMC_outw(lp, __v, a, __smc_r); \
else if (SMC_8BIT(lp)) \
SMC_outw_b(__v, a, __smc_r); \
else \
@@ -107,10 +105,10 @@
#define SMC_IRQ_FLAGS (-1) /* from resource */
/* We actually can't write halfwords properly if not word aligned */
-static inline void __SMC_outw(u16 val, void __iomem *ioaddr, int reg)
+static inline void _SMC_outw_align4(u16 val, void __iomem *ioaddr, int reg,
+ bool use_align4_workaround)
{
- if ((machine_is_mainstone() || machine_is_stargate2() ||
- machine_is_pxa_idp()) && reg & 2) {
+ if (use_align4_workaround) {
unsigned int v = val << 16;
v |= readl(ioaddr + (reg & ~2)) & 0xffff;
writel(v, ioaddr + (reg & ~2));
@@ -119,6 +117,12 @@ static inline void __SMC_outw(u16 val, void __iomem *ioaddr, int reg)
}
}
+#define __SMC_outw(lp, v, a, r) \
+ _SMC_outw_align4((v), (a), (r), \
+ IS_BUILTIN(CONFIG_ARCH_PXA) && ((r) & 2) && \
+ (lp)->cfg.pxa_u16_align4)
+
+
#elif defined(CONFIG_SH_SH4202_MICRODEV)
#define SMC_CAN_USE_8BIT 0
@@ -129,7 +133,7 @@ static inline void __SMC_outw(u16 val, void __iomem *ioaddr, int reg)
#define SMC_inw(a, r) inw((a) + (r) - 0xa0000000)
#define SMC_inl(a, r) inl((a) + (r) - 0xa0000000)
#define SMC_outb(v, a, r) outb(v, (a) + (r) - 0xa0000000)
-#define SMC_outw(v, a, r) outw(v, (a) + (r) - 0xa0000000)
+#define SMC_outw(lp, v, a, r) outw(v, (a) + (r) - 0xa0000000)
#define SMC_outl(v, a, r) outl(v, (a) + (r) - 0xa0000000)
#define SMC_insl(a, r, p, l) insl((a) + (r) - 0xa0000000, p, l)
#define SMC_outsl(a, r, p, l) outsl((a) + (r) - 0xa0000000, p, l)
@@ -147,7 +151,7 @@ static inline void __SMC_outw(u16 val, void __iomem *ioaddr, int reg)
#define SMC_inb(a, r) inb(((u32)a) + (r))
#define SMC_inw(a, r) inw(((u32)a) + (r))
#define SMC_outb(v, a, r) outb(v, ((u32)a) + (r))
-#define SMC_outw(v, a, r) outw(v, ((u32)a) + (r))
+#define SMC_outw(lp, v, a, r) outw(v, ((u32)a) + (r))
#define SMC_insw(a, r, p, l) insw(((u32)a) + (r), p, l)
#define SMC_outsw(a, r, p, l) outsw(((u32)a) + (r), p, l)
@@ -175,7 +179,7 @@ static inline void __SMC_outw(u16 val, void __iomem *ioaddr, int reg)
#define SMC_inw(a, r) readw((a) + (r))
#define SMC_inl(a, r) readl((a) + (r))
#define SMC_outb(v, a, r) writeb(v, (a) + (r))
-#define SMC_outw(v, a, r) writew(v, (a) + (r))
+#define SMC_outw(lp, v, a, r) writew(v, (a) + (r))
#define SMC_outl(v, a, r) writel(v, (a) + (r))
#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
@@ -207,7 +211,7 @@ static inline void mcf_outsw(void *a, unsigned char *p, int l)
}
#define SMC_inw(a, r) _swapw(readw((a) + (r)))
-#define SMC_outw(v, a, r) writew(_swapw(v), (a) + (r))
+#define SMC_outw(lp, v, a, r) writew(_swapw(v), (a) + (r))
#define SMC_insw(a, r, p, l) mcf_insw(a + r, p, l)
#define SMC_outsw(a, r, p, l) mcf_outsw(a + r, p, l)
@@ -241,7 +245,7 @@ static inline void mcf_outsw(void *a, unsigned char *p, int l)
#define SMC_inw(a, r) ioread16((a) + (r))
#define SMC_inl(a, r) ioread32((a) + (r))
#define SMC_outb(v, a, r) iowrite8(v, (a) + (r))
-#define SMC_outw(v, a, r) iowrite16(v, (a) + (r))
+#define SMC_outw(lp, v, a, r) iowrite16(v, (a) + (r))
#define SMC_outl(v, a, r) iowrite32(v, (a) + (r))
#define SMC_insw(a, r, p, l) ioread16_rep((a) + (r), p, l)
#define SMC_outsw(a, r, p, l) iowrite16_rep((a) + (r), p, l)
@@ -303,6 +307,8 @@ struct smc_local {
/* the low address lines on some platforms aren't connected... */
int io_shift;
+ /* on some platforms a u16 write must be 4-bytes aligned */
+ bool half_word_align4;
struct smc91x_platdata cfg;
};
@@ -457,7 +463,7 @@ smc_pxa_dma_insw(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma,
#if ! SMC_CAN_USE_16BIT
-#define SMC_outw(x, ioaddr, reg) SMC_outw_b(x, ioaddr, reg)
+#define SMC_outw(lp, x, ioaddr, reg) SMC_outw_b(x, ioaddr, reg)
#define SMC_inw(ioaddr, reg) SMC_inw_b(ioaddr, reg)
#define SMC_insw(a, r, p, l) BUG()
#define SMC_outsw(a, r, p, l) BUG()
@@ -909,7 +915,7 @@ static const char * chip_ids[ 16 ] = {
else if (SMC_8BIT(lp)) \
SMC_outb(x, ioaddr, PN_REG(lp)); \
else \
- SMC_outw(x, ioaddr, PN_REG(lp)); \
+ SMC_outw(lp, x, ioaddr, PN_REG(lp)); \
} while (0)
#define SMC_GET_AR(lp) \
@@ -937,7 +943,7 @@ static const char * chip_ids[ 16 ] = {
int __mask; \
local_irq_save(__flags); \
__mask = SMC_inw(ioaddr, INT_REG(lp)) & ~0xff; \
- SMC_outw(__mask | (x), ioaddr, INT_REG(lp)); \
+ SMC_outw(lp, __mask | (x), ioaddr, INT_REG(lp)); \
local_irq_restore(__flags); \
} \
} while (0)
@@ -951,7 +957,7 @@ static const char * chip_ids[ 16 ] = {
if (SMC_8BIT(lp)) \
SMC_outb(x, ioaddr, IM_REG(lp)); \
else \
- SMC_outw((x) << 8, ioaddr, INT_REG(lp)); \
+ SMC_outw(lp, (x) << 8, ioaddr, INT_REG(lp)); \
} while (0)
#define SMC_CURRENT_BANK(lp) SMC_inw(ioaddr, BANK_SELECT)
@@ -961,22 +967,22 @@ static const char * chip_ids[ 16 ] = {
if (SMC_MUST_ALIGN_WRITE(lp)) \
SMC_outl((x)<<16, ioaddr, 12<<SMC_IO_SHIFT); \
else \
- SMC_outw(x, ioaddr, BANK_SELECT); \
+ SMC_outw(lp, x, ioaddr, BANK_SELECT); \
} while (0)
#define SMC_GET_BASE(lp) SMC_inw(ioaddr, BASE_REG(lp))
-#define SMC_SET_BASE(lp, x) SMC_outw(x, ioaddr, BASE_REG(lp))
+#define SMC_SET_BASE(lp, x) SMC_outw(lp, x, ioaddr, BASE_REG(lp))
#define SMC_GET_CONFIG(lp) SMC_inw(ioaddr, CONFIG_REG(lp))
-#define SMC_SET_CONFIG(lp, x) SMC_outw(x, ioaddr, CONFIG_REG(lp))
+#define SMC_SET_CONFIG(lp, x) SMC_outw(lp, x, ioaddr, CONFIG_REG(lp))
#define SMC_GET_COUNTER(lp) SMC_inw(ioaddr, COUNTER_REG(lp))
#define SMC_GET_CTL(lp) SMC_inw(ioaddr, CTL_REG(lp))
-#define SMC_SET_CTL(lp, x) SMC_outw(x, ioaddr, CTL_REG(lp))
+#define SMC_SET_CTL(lp, x) SMC_outw(lp, x, ioaddr, CTL_REG(lp))
#define SMC_GET_MII(lp) SMC_inw(ioaddr, MII_REG(lp))
@@ -987,20 +993,20 @@ static const char * chip_ids[ 16 ] = {
if (SMC_MUST_ALIGN_WRITE(lp)) \
SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 8, 1)); \
else \
- SMC_outw(x, ioaddr, GP_REG(lp)); \
+ SMC_outw(lp, x, ioaddr, GP_REG(lp)); \
} while (0)
-#define SMC_SET_MII(lp, x) SMC_outw(x, ioaddr, MII_REG(lp))
+#define SMC_SET_MII(lp, x) SMC_outw(lp, x, ioaddr, MII_REG(lp))
#define SMC_GET_MIR(lp) SMC_inw(ioaddr, MIR_REG(lp))
-#define SMC_SET_MIR(lp, x) SMC_outw(x, ioaddr, MIR_REG(lp))
+#define SMC_SET_MIR(lp, x) SMC_outw(lp, x, ioaddr, MIR_REG(lp))
#define SMC_GET_MMU_CMD(lp) SMC_inw(ioaddr, MMU_CMD_REG(lp))
-#define SMC_SET_MMU_CMD(lp, x) SMC_outw(x, ioaddr, MMU_CMD_REG(lp))
+#define SMC_SET_MMU_CMD(lp, x) SMC_outw(lp, x, ioaddr, MMU_CMD_REG(lp))
-#define SMC_GET_FIFO(lp) SMC_inw(ioaddr, FIFO_REG(lp))
+#define SMC_GET_FIFO(lp) SMC_inw(ioaddr, FIFO_REG(lp))
#define SMC_GET_PTR(lp) SMC_inw(ioaddr, PTR_REG(lp))
@@ -1009,14 +1015,14 @@ static const char * chip_ids[ 16 ] = {
if (SMC_MUST_ALIGN_WRITE(lp)) \
SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 4, 2)); \
else \
- SMC_outw(x, ioaddr, PTR_REG(lp)); \
+ SMC_outw(lp, x, ioaddr, PTR_REG(lp)); \
} while (0)
#define SMC_GET_EPH_STATUS(lp) SMC_inw(ioaddr, EPH_STATUS_REG(lp))
#define SMC_GET_RCR(lp) SMC_inw(ioaddr, RCR_REG(lp))
-#define SMC_SET_RCR(lp, x) SMC_outw(x, ioaddr, RCR_REG(lp))
+#define SMC_SET_RCR(lp, x) SMC_outw(lp, x, ioaddr, RCR_REG(lp))
#define SMC_GET_REV(lp) SMC_inw(ioaddr, REV_REG(lp))
@@ -1027,12 +1033,12 @@ static const char * chip_ids[ 16 ] = {
if (SMC_MUST_ALIGN_WRITE(lp)) \
SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 8, 0)); \
else \
- SMC_outw(x, ioaddr, RPC_REG(lp)); \
+ SMC_outw(lp, x, ioaddr, RPC_REG(lp)); \
} while (0)
#define SMC_GET_TCR(lp) SMC_inw(ioaddr, TCR_REG(lp))
-#define SMC_SET_TCR(lp, x) SMC_outw(x, ioaddr, TCR_REG(lp))
+#define SMC_SET_TCR(lp, x) SMC_outw(lp, x, ioaddr, TCR_REG(lp))
#ifndef SMC_GET_MAC_ADDR
#define SMC_GET_MAC_ADDR(lp, addr) \
@@ -1049,18 +1055,18 @@ static const char * chip_ids[ 16 ] = {
#define SMC_SET_MAC_ADDR(lp, addr) \
do { \
- SMC_outw(addr[0]|(addr[1] << 8), ioaddr, ADDR0_REG(lp)); \
- SMC_outw(addr[2]|(addr[3] << 8), ioaddr, ADDR1_REG(lp)); \
- SMC_outw(addr[4]|(addr[5] << 8), ioaddr, ADDR2_REG(lp)); \
+ SMC_outw(lp, addr[0] | (addr[1] << 8), ioaddr, ADDR0_REG(lp)); \
+ SMC_outw(lp, addr[2] | (addr[3] << 8), ioaddr, ADDR1_REG(lp)); \
+ SMC_outw(lp, addr[4] | (addr[5] << 8), ioaddr, ADDR2_REG(lp)); \
} while (0)
#define SMC_SET_MCAST(lp, x) \
do { \
const unsigned char *mt = (x); \
- SMC_outw(mt[0] | (mt[1] << 8), ioaddr, MCAST_REG1(lp)); \
- SMC_outw(mt[2] | (mt[3] << 8), ioaddr, MCAST_REG2(lp)); \
- SMC_outw(mt[4] | (mt[5] << 8), ioaddr, MCAST_REG3(lp)); \
- SMC_outw(mt[6] | (mt[7] << 8), ioaddr, MCAST_REG4(lp)); \
+ SMC_outw(lp, mt[0] | (mt[1] << 8), ioaddr, MCAST_REG1(lp)); \
+ SMC_outw(lp, mt[2] | (mt[3] << 8), ioaddr, MCAST_REG2(lp)); \
+ SMC_outw(lp, mt[4] | (mt[5] << 8), ioaddr, MCAST_REG3(lp)); \
+ SMC_outw(lp, mt[6] | (mt[7] << 8), ioaddr, MCAST_REG4(lp)); \
} while (0)
#define SMC_PUT_PKT_HDR(lp, status, length) \
@@ -1069,8 +1075,8 @@ static const char * chip_ids[ 16 ] = {
SMC_outl((status) | (length)<<16, ioaddr, \
DATA_REG(lp)); \
else { \
- SMC_outw(status, ioaddr, DATA_REG(lp)); \
- SMC_outw(length, ioaddr, DATA_REG(lp)); \
+ SMC_outw(lp, status, ioaddr, DATA_REG(lp)); \
+ SMC_outw(lp, length, ioaddr, DATA_REG(lp)); \
} \
} while (0)
--
2.1.4
next prev parent reply other threads:[~2016-10-17 19:46 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-17 19:45 [PATCH v3 0/4] support smc91x on mainstone and devicetree Robert Jarzmik
2016-10-17 19:45 ` Robert Jarzmik
2016-10-17 19:45 ` [PATCH v3 1/4] ARM: pxa: enhance smc91x platform data Robert Jarzmik
2016-10-17 19:45 ` Robert Jarzmik
2016-10-17 19:45 ` Robert Jarzmik [this message]
2016-10-17 19:45 ` [PATCH v3 2/4] net: smc91x: isolate u16 writes alignment workaround Robert Jarzmik
2016-10-17 19:45 ` [PATCH v3 3/4] net: smc91x: take into account half-word workaround Robert Jarzmik
2016-10-17 19:45 ` Robert Jarzmik
2016-10-17 19:45 ` Robert Jarzmik
2016-10-17 19:45 ` [PATCH v3 4/4] net: smsc91x: add u16 workaround for pxa platforms Robert Jarzmik
2016-10-17 19:45 ` Robert Jarzmik
2016-10-17 19:45 ` Robert Jarzmik
2016-10-18 16:39 ` Rob Herring
2016-10-18 16:39 ` Rob Herring
2016-10-18 18:14 ` [PATCH v3 0/4] support smc91x on mainstone and devicetree David Miller
2016-10-18 18:14 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1476733532-29716-3-git-send-email-robert.jarzmik@free.fr \
--to=robert.jarzmik@free.fr \
--cc=daniel@zonque.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=dhowells@redhat.com \
--cc=haojian.zhuang@gmail.com \
--cc=jic23@cam.ac.uk \
--cc=linux-am33-list@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=netdev@vger.kernel.org \
--cc=nico@fluxnic.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.