All of lore.kernel.org
 help / color / mirror / Atom feed
From: christopher.lee.bostic@gmail.com
To: openbmc@lists.ozlabs.org
Cc: joel@jms.id.au, zahrens@us.ibm.com, xxpetri@de.ibm.com,
	Jeremy Kerr <jk@ozlabs.org>
Subject: [PATCH linux v5 01/18] fsi: Add empty fsi bus definitions
Date: Wed, 19 Oct 2016 18:09:29 -0500	[thread overview]
Message-ID: <1476918586-13475-2-git-send-email-christopher.lee.bostic@gmail.com> (raw)
In-Reply-To: <1476918586-13475-1-git-send-email-christopher.lee.bostic@gmail.com>

From: Jeremy Kerr <jk@ozlabs.org>

This change adds the initial (empty) fsi bus definition, and introduces
drivers/fsi/.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---
 drivers/Kconfig        |  2 ++
 drivers/Makefile       |  1 +
 drivers/fsi/Kconfig    | 12 ++++++++++++
 drivers/fsi/Makefile   |  2 ++
 drivers/fsi/fsi-core.c | 38 ++++++++++++++++++++++++++++++++++++++
 include/linux/fsi.h    | 23 +++++++++++++++++++++++
 6 files changed, 78 insertions(+)
 create mode 100644 drivers/fsi/Kconfig
 create mode 100644 drivers/fsi/Makefile
 create mode 100644 drivers/fsi/fsi-core.c
 create mode 100644 include/linux/fsi.h

diff --git a/drivers/Kconfig b/drivers/Kconfig
index e1e2066..117ca14c 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -202,4 +202,6 @@ source "drivers/hwtracing/intel_th/Kconfig"
 
 source "drivers/fpga/Kconfig"
 
+source "drivers/fsi/Kconfig"
+
 endmenu
diff --git a/drivers/Makefile b/drivers/Makefile
index 0b6f3d6..7a1c96f 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -173,3 +173,4 @@ obj-$(CONFIG_STM)		+= hwtracing/stm/
 obj-$(CONFIG_ANDROID)		+= android/
 obj-$(CONFIG_NVMEM)		+= nvmem/
 obj-$(CONFIG_FPGA)		+= fpga/
+obj-$(CONFIG_FSI)		+= fsi/
diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig
new file mode 100644
index 0000000..04c1a0e
--- /dev/null
+++ b/drivers/fsi/Kconfig
@@ -0,0 +1,12 @@
+#
+# FSI subsystem
+#
+
+menu "FSI support"
+
+config FSI
+	tristate "FSI support"
+	---help---
+	  FSI - the FRU Support Interface - is a simple bus for low-level
+	  access to POWER-based hardware.
+endmenu
diff --git a/drivers/fsi/Makefile b/drivers/fsi/Makefile
new file mode 100644
index 0000000..db0e5e7
--- /dev/null
+++ b/drivers/fsi/Makefile
@@ -0,0 +1,2 @@
+
+obj-$(CONFIG_FSI) += fsi-core.o
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
new file mode 100644
index 0000000..3e45306
--- /dev/null
+++ b/drivers/fsi/fsi-core.c
@@ -0,0 +1,38 @@
+/*
+ * FSI core driver
+ *
+ * Copyright (C) IBM Corporation 2016
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/fsi.h>
+#include <linux/module.h>
+
+/* FSI core & Linux bus type definitions */
+
+struct bus_type fsi_bus_type = {
+	.name		= "fsi",
+};
+EXPORT_SYMBOL_GPL(fsi_bus_type);
+
+static int fsi_init(void)
+{
+	return bus_register(&fsi_bus_type);
+}
+
+static void fsi_exit(void)
+{
+	bus_unregister(&fsi_bus_type);
+}
+
+module_init(fsi_init);
+module_exit(fsi_exit);
diff --git a/include/linux/fsi.h b/include/linux/fsi.h
new file mode 100644
index 0000000..8e8bdea
--- /dev/null
+++ b/include/linux/fsi.h
@@ -0,0 +1,23 @@
+/*
+ * FSI device & driver interfaces
+ *
+ * Copyright (C) IBM Corporation 2016
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef LINUX_FSI_H
+#define LINUX_FSI_H
+
+#include <linux/device.h>
+
+extern struct bus_type fsi_bus_type;
+
+#endif /* LINUX_FSI_H */
-- 
1.8.2.2

  reply	other threads:[~2016-10-19 23:09 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-19 23:09 [PATCH linux v5 00/18] FSI device driver introduction christopher.lee.bostic
2016-10-19 23:09 ` christopher.lee.bostic [this message]
2016-10-19 23:09 ` [PATCH linux v5 02/18] fsi: Add device & driver definitions christopher.lee.bostic
2016-10-19 23:09 ` [PATCH linux v5 03/18] fsi: add driver to device matches christopher.lee.bostic
2016-10-19 23:09 ` [PATCH linux v5 04/18] fsi: Add fsi master definition christopher.lee.bostic
2016-10-19 23:09 ` [PATCH linux v5 05/18] fsi: Add fake master driver christopher.lee.bostic
2016-10-19 23:09 ` [PATCH linux v5 06/18] fsi: enable debug christopher.lee.bostic
2016-10-19 23:09 ` [PATCH linux v5 07/18] fsi: Add slave definition christopher.lee.bostic
2016-10-19 23:09 ` [PATCH linux v5 08/18] fsi: Add empty master scan christopher.lee.bostic
2016-10-19 23:09 ` [PATCH linux v5 09/18] fsi: Add crc4 helpers christopher.lee.bostic
2016-10-19 23:09 ` [PATCH linux v5 10/18] fsi: Implement slave initialisation christopher.lee.bostic
2016-10-19 23:09 ` [PATCH linux v5 11/18] fsi: scan slaves & register devices christopher.lee.bostic
2016-10-19 23:09 ` [PATCH linux v5 12/18] fsi: Add device read/write/peek functions christopher.lee.bostic
2016-10-19 23:09 ` [PATCH linux v5 13/18] drivers/fsi: Set up links for slave communication christopher.lee.bostic
2016-10-19 23:39   ` Jeremy Kerr
2016-10-20  0:10     ` Joel Stanley
2016-10-20 14:16       ` Christopher Bostic
2016-10-21  5:28   ` Jeremy Kerr
2016-10-28 21:07     ` Christopher Bostic
2016-10-19 23:09 ` [PATCH linux v5 14/18] drivers/fsi: Set slave SMODE to init communications christopher.lee.bostic
2016-10-20  0:24   ` Jeremy Kerr
2016-10-19 23:09 ` [PATCH linux v5 15/18] drivers/fsi: Add GPIO FSI master christopher.lee.bostic
2016-10-20  1:26   ` Jeremy Kerr
2016-10-20 15:02     ` Christopher Bostic
2016-10-21  1:26       ` Jeremy Kerr
2016-10-30 21:29         ` Christopher Bostic
2016-10-31  0:59           ` Jeremy Kerr
2016-10-19 23:09 ` [PATCH linux v5 16/18] drivers/fsi: Add client driver register utilities christopher.lee.bostic
2016-10-20  1:29   ` Jeremy Kerr
2016-10-20 15:07     ` Christopher Bostic
2016-10-19 23:09 ` [PATCH linux v5 17/18] drivers/fsi: Add SCOM FSI client device driver christopher.lee.bostic
2016-10-20  3:27   ` Jeremy Kerr
2016-10-20 15:21     ` Christopher Bostic
2016-10-21  5:24       ` Jeremy Kerr
2016-10-28 19:25         ` Christopher Bostic
2016-10-20 20:11     ` Christopher Bostic
2016-10-19 23:09 ` [PATCH linux v5 18/18] Documenation: Add basic FSI text file christopher.lee.bostic
2016-10-20  2:17   ` Jeremy Kerr
2016-10-20 15:11     ` Christopher Bostic

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1476918586-13475-2-git-send-email-christopher.lee.bostic@gmail.com \
    --to=christopher.lee.bostic@gmail.com \
    --cc=jk@ozlabs.org \
    --cc=joel@jms.id.au \
    --cc=openbmc@lists.ozlabs.org \
    --cc=xxpetri@de.ibm.com \
    --cc=zahrens@us.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.