From: Simon Glass <sjg@chromium.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 6/8] arm: Remove smdk2410 board
Date: Thu, 20 Oct 2016 13:06:58 -0600 [thread overview]
Message-ID: <1476990421-30259-7-git-send-email-sjg@chromium.org> (raw)
In-Reply-To: <1476990421-30259-1-git-send-email-sjg@chromium.org>
This board has not been converted to DM_SERIAL by the deadline.
Remove it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
arch/arm/Kconfig | 5 -
board/samsung/smdk2410/Kconfig | 15 ---
board/samsung/smdk2410/MAINTAINERS | 6 --
board/samsung/smdk2410/Makefile | 9 --
board/samsung/smdk2410/lowlevel_init.S | 146 --------------------------
board/samsung/smdk2410/smdk2410.c | 139 -------------------------
configs/smdk2410_defconfig | 16 ---
include/configs/smdk2410.h | 181 ---------------------------------
scripts/config_whitelist.txt | 2 -
9 files changed, 519 deletions(-)
delete mode 100644 board/samsung/smdk2410/Kconfig
delete mode 100644 board/samsung/smdk2410/MAINTAINERS
delete mode 100644 board/samsung/smdk2410/Makefile
delete mode 100644 board/samsung/smdk2410/lowlevel_init.S
delete mode 100644 board/samsung/smdk2410/smdk2410.c
delete mode 100644 configs/smdk2410_defconfig
delete mode 100644 include/configs/smdk2410.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index cd582a7..6aa5208 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -141,10 +141,6 @@ config TARGET_VCMA9
bool "Support VCMA9"
select CPU_ARM920T
-config TARGET_SMDK2410
- bool "Support smdk2410"
- select CPU_ARM920T
-
config TARGET_ASPENITE
bool "Support aspenite"
select CPU_ARM926EJS
@@ -978,7 +974,6 @@ source "board/olimex/mx23_olinuxino/Kconfig"
source "board/phytec/pcm051/Kconfig"
source "board/phytec/pcm052/Kconfig"
source "board/ppcag/bg0900/Kconfig"
-source "board/samsung/smdk2410/Kconfig"
source "board/sandisk/sansa_fuze_plus/Kconfig"
source "board/schulercontrol/sc_sps_1/Kconfig"
source "board/siemens/draco/Kconfig"
diff --git a/board/samsung/smdk2410/Kconfig b/board/samsung/smdk2410/Kconfig
deleted file mode 100644
index e987b64..0000000
--- a/board/samsung/smdk2410/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_SMDK2410
-
-config SYS_BOARD
- default "smdk2410"
-
-config SYS_VENDOR
- default "samsung"
-
-config SYS_SOC
- default "s3c24x0"
-
-config SYS_CONFIG_NAME
- default "smdk2410"
-
-endif
diff --git a/board/samsung/smdk2410/MAINTAINERS b/board/samsung/smdk2410/MAINTAINERS
deleted file mode 100644
index 12a25e8..0000000
--- a/board/samsung/smdk2410/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-SMDK2410 BOARD
-M: David M?ller <d.mueller@elsoft.ch>
-S: Maintained
-F: board/samsung/smdk2410/
-F: include/configs/smdk2410.h
-F: configs/smdk2410_defconfig
diff --git a/board/samsung/smdk2410/Makefile b/board/samsung/smdk2410/Makefile
deleted file mode 100644
index 1939a21..0000000
--- a/board/samsung/smdk2410/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := smdk2410.o
-obj-y += lowlevel_init.o
diff --git a/board/samsung/smdk2410/lowlevel_init.S b/board/samsung/smdk2410/lowlevel_init.S
deleted file mode 100644
index c3f4187..0000000
--- a/board/samsung/smdk2410/lowlevel_init.S
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
- * Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
- *
- * Modified for the Samsung SMDK2410 by
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-
-#include <config.h>
-
-/* some parameters for the board */
-
-/*
- *
- * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S
- *
- * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar@sec.samsung.com>
- *
- */
-
-#define BWSCON 0x48000000
-
-/* BWSCON */
-#define DW8 (0x0)
-#define DW16 (0x1)
-#define DW32 (0x2)
-#define WAIT (0x1<<2)
-#define UBLB (0x1<<3)
-
-#define B1_BWSCON (DW32)
-#define B2_BWSCON (DW16)
-#define B3_BWSCON (DW16 + WAIT + UBLB)
-#define B4_BWSCON (DW16)
-#define B5_BWSCON (DW16)
-#define B6_BWSCON (DW32)
-#define B7_BWSCON (DW32)
-
-/* BANK0CON */
-#define B0_Tacs 0x0 /* 0clk */
-#define B0_Tcos 0x0 /* 0clk */
-#define B0_Tacc 0x7 /* 14clk */
-#define B0_Tcoh 0x0 /* 0clk */
-#define B0_Tah 0x0 /* 0clk */
-#define B0_Tacp 0x0
-#define B0_PMC 0x0 /* normal */
-
-/* BANK1CON */
-#define B1_Tacs 0x0 /* 0clk */
-#define B1_Tcos 0x0 /* 0clk */
-#define B1_Tacc 0x7 /* 14clk */
-#define B1_Tcoh 0x0 /* 0clk */
-#define B1_Tah 0x0 /* 0clk */
-#define B1_Tacp 0x0
-#define B1_PMC 0x0
-
-#define B2_Tacs 0x0
-#define B2_Tcos 0x0
-#define B2_Tacc 0x7
-#define B2_Tcoh 0x0
-#define B2_Tah 0x0
-#define B2_Tacp 0x0
-#define B2_PMC 0x0
-
-#define B3_Tacs 0x0 /* 0clk */
-#define B3_Tcos 0x3 /* 4clk */
-#define B3_Tacc 0x7 /* 14clk */
-#define B3_Tcoh 0x1 /* 1clk */
-#define B3_Tah 0x0 /* 0clk */
-#define B3_Tacp 0x3 /* 6clk */
-#define B3_PMC 0x0 /* normal */
-
-#define B4_Tacs 0x0 /* 0clk */
-#define B4_Tcos 0x0 /* 0clk */
-#define B4_Tacc 0x7 /* 14clk */
-#define B4_Tcoh 0x0 /* 0clk */
-#define B4_Tah 0x0 /* 0clk */
-#define B4_Tacp 0x0
-#define B4_PMC 0x0 /* normal */
-
-#define B5_Tacs 0x0 /* 0clk */
-#define B5_Tcos 0x0 /* 0clk */
-#define B5_Tacc 0x7 /* 14clk */
-#define B5_Tcoh 0x0 /* 0clk */
-#define B5_Tah 0x0 /* 0clk */
-#define B5_Tacp 0x0
-#define B5_PMC 0x0 /* normal */
-
-#define B6_MT 0x3 /* SDRAM */
-#define B6_Trcd 0x1
-#define B6_SCAN 0x1 /* 9bit */
-
-#define B7_MT 0x3 /* SDRAM */
-#define B7_Trcd 0x1 /* 3clk */
-#define B7_SCAN 0x1 /* 9bit */
-
-/* REFRESH parameter */
-#define REFEN 0x1 /* Refresh enable */
-#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */
-#define Trp 0x0 /* 2clk */
-#define Trc 0x3 /* 7clk */
-#define Tchr 0x2 /* 3clk */
-#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */
-/**************************************/
-
-.globl lowlevel_init
-lowlevel_init:
- /* memory control configuration */
- /* make r0 relative the current location so that it */
- /* reads SMRDATA out of FLASH rather than memory ! */
- ldr r0, =SMRDATA
- ldr r1, =CONFIG_SYS_TEXT_BASE
- sub r0, r0, r1
- ldr r1, =BWSCON /* Bus Width Status Controller */
- add r2, r0, #13*4
-0:
- ldr r3, [r0], #4
- str r3, [r1], #4
- cmp r2, r0
- bne 0b
-
- /* everything is fine now */
- mov pc, lr
-
- .ltorg
-/* the literal pools origin */
-
-SMRDATA:
- .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28))
- .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))
- .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))
- .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))
- .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))
- .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))
- .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))
- .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
- .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
- .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
- .word 0x32
- .word 0x30
- .word 0x30
diff --git a/board/samsung/smdk2410/smdk2410.c b/board/samsung/smdk2410/smdk2410.c
deleted file mode 100644
index 6e678c7..0000000
--- a/board/samsung/smdk2410/smdk2410.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002, 2010
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <asm/arch/s3c24x0_cpu.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define FCLK_SPEED 1
-
-#if (FCLK_SPEED == 0) /* Fout = 203MHz, Fin = 12MHz for Audio */
-#define M_MDIV 0xC3
-#define M_PDIV 0x4
-#define M_SDIV 0x1
-#elif (FCLK_SPEED == 1) /* Fout = 202.8MHz */
-#define M_MDIV 0xA1
-#define M_PDIV 0x3
-#define M_SDIV 0x1
-#endif
-
-#define USB_CLOCK 1
-
-#if (USB_CLOCK == 0)
-#define U_M_MDIV 0xA1
-#define U_M_PDIV 0x3
-#define U_M_SDIV 0x1
-#elif (USB_CLOCK == 1)
-#define U_M_MDIV 0x48
-#define U_M_PDIV 0x3
-#define U_M_SDIV 0x2
-#endif
-
-static inline void pll_delay(unsigned long loops)
-{
- __asm__ volatile ("1:\n"
- "subs %0, %1, #1\n"
- "bne 1b" : "=r" (loops) : "0" (loops));
-}
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_early_init_f(void)
-{
- struct s3c24x0_clock_power * const clk_power =
- s3c24x0_get_base_clock_power();
- struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
-
- /* to reduce PLL lock time, adjust the LOCKTIME register */
- writel(0xFFFFFF, &clk_power->locktime);
-
- /* configure MPLL */
- writel((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV,
- &clk_power->mpllcon);
-
- /* some delay between MPLL and UPLL */
- pll_delay(4000);
-
- /* configure UPLL */
- writel((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV,
- &clk_power->upllcon);
-
- /* some delay between MPLL and UPLL */
- pll_delay(8000);
-
- /* set up the I/O ports */
- writel(0x007FFFFF, &gpio->gpacon);
- writel(0x00044555, &gpio->gpbcon);
- writel(0x000007FF, &gpio->gpbup);
- writel(0xAAAAAAAA, &gpio->gpccon);
- writel(0x0000FFFF, &gpio->gpcup);
- writel(0xAAAAAAAA, &gpio->gpdcon);
- writel(0x0000FFFF, &gpio->gpdup);
- writel(0xAAAAAAAA, &gpio->gpecon);
- writel(0x0000FFFF, &gpio->gpeup);
- writel(0x000055AA, &gpio->gpfcon);
- writel(0x000000FF, &gpio->gpfup);
- writel(0xFF95FFBA, &gpio->gpgcon);
- writel(0x0000FFFF, &gpio->gpgup);
- writel(0x002AFAAA, &gpio->gphcon);
- writel(0x000007FF, &gpio->gphup);
-
- return 0;
-}
-
-int board_init(void)
-{
- /* arch number of SMDK2410-Board */
- gd->bd->bi_arch_number = MACH_TYPE_SMDK2410;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x30000100;
-
- icache_enable();
- dcache_enable();
-
- return 0;
-}
-
-int dram_init(void)
-{
- /* dram_init must store complete ramsize in gd->ram_size */
- gd->ram_size = PHYS_SDRAM_1_SIZE;
- return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_CS8900
- rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
- return rc;
-}
-#endif
-
-/*
- * Hardcoded flash setup:
- * Flash 0 is a non-CFI AMD AM29LV800BB flash.
- */
-ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
-{
- info->portwidth = FLASH_CFI_16BIT;
- info->chipwidth = FLASH_CFI_BY16;
- info->interface = FLASH_CFI_X16;
- return 1;
-}
diff --git a/configs/smdk2410_defconfig b/configs/smdk2410_defconfig
deleted file mode 100644
index d6aa2dd..0000000
--- a/configs/smdk2410_defconfig
+++ /dev/null
@@ -1,16 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_SMDK2410=y
-CONFIG_BOOTDELAY=5
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="SMDK2410 # "
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_UBI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h
deleted file mode 100644
index f76fa75..0000000
--- a/include/configs/smdk2410.h
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- * Gary Jennejohn <garyj@denx.de>
- * David Mueller <d.mueller@elsoft.ch>
- *
- * Configuation settings for the SAMSUNG SMDK2410 board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_S3C24X0 /* This is a SAMSUNG S3C24x0-type SoC */
-#define CONFIG_S3C2410 /* specifically a SAMSUNG S3C2410 SoC */
-#define CONFIG_SMDK2410 /* on a SAMSUNG SMDK2410 Board */
-
-#define CONFIG_SYS_TEXT_BASE 0x0
-
-#define CONFIG_SYS_ARM_CACHE_WRITETHROUGH
-
-/* input clock of PLL (the SMDK2410 has 12MHz input clock) */
-#define CONFIG_SYS_CLK_FREQ 12000000
-
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-/*
- * Hardware drivers
- */
-#define CONFIG_CS8900 /* we have a CS8900 on-board */
-#define CONFIG_CS8900_BASE 0x19000300
-#define CONFIG_CS8900_BUS16 /* the Linux driver does accesses as shorts */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_S3C24X0_SERIAL
-#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2410 */
-
-/************************************************************
- * USB support (currently only works with D-cache off)
- ************************************************************/
-#define CONFIG_USB_OHCI
-#define CONFIG_USB_OHCI_S3C24XX
-#define CONFIG_USB_KEYBOARD
-#define CONFIG_DOS_PARTITION
-
-/************************************************************
- * RTC
- ************************************************************/
-#define CONFIG_RTC_S3C24X0
-
-#define CONFIG_BAUDRATE 115200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_REGINFO
-
-#define CONFIG_CMDLINE_EDITING
-
-/* autoboot */
-#define CONFIG_BOOT_RETRY_TIME -1
-#define CONFIG_RESET_TO_RETRY
-
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 10.0.0.110
-#define CONFIG_SERVERIP 10.0.0.1
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 256
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START 0x30000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x30800000
-
-/* support additional compression methods */
-#define CONFIG_BZIP2
-#define CONFIG_LZO
-#define CONFIG_LZMA
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #0 */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_FLASH_CFI_LEGACY
-#define CONFIG_SYS_FLASH_LEGACY_512Kx16
-#define CONFIG_FLASH_SHOW_PROGRESS 45
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
-#define CONFIG_SYS_MAX_FLASH_SECT (19)
-
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x070000)
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SIZE 0x10000
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * Size of malloc() pool
- * BZIP2 / LZO / LZMA need a lot of RAM
- */
-#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
-
-#define CONFIG_SYS_MONITOR_LEN (448 * 1024)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-
-/*
- * NAND configuration
- */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_S3C2410
-#define CONFIG_SYS_S3C2410_NAND_HWECC
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x4E000000
-#endif
-
-/*
- * File system
- */
-#define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_YAFFS2
-#define CONFIG_RBTREE
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
- GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_BOARD_EARLY_INIT_F
-
-#endif /* __CONFIG_H */
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 4d42fc5..337407f 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -165,7 +165,6 @@ CONFIG_ARCH_RMOBILE_EXTRAM_BOOT
CONFIG_ARCH_RPC
CONFIG_ARCH_S3C2440
CONFIG_ARCH_SHARK
-CONFIG_ARCH_SMDK2410
CONFIG_ARCH_TEGRA
CONFIG_ARCH_USE_BUILTIN_BSWAP
CONFIG_ARCH_VERSATILE_PB
@@ -4119,7 +4118,6 @@ CONFIG_SMC_B3TIM_VAL
CONFIG_SMC_GCTL_VAL
CONFIG_SMC_USE_32_BIT
CONFIG_SMC_USE_IOFUNCS
-CONFIG_SMDK2410
CONFIG_SMDK5420
CONFIG_SMDKC100
CONFIG_SMDKV310
--
2.8.0.rc3.226.g39d4020
next prev parent reply other threads:[~2016-10-20 19:06 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-20 19:06 [U-Boot] [PATCH 0/8] dm: Update on serial driver progress Simon Glass
2016-10-20 19:06 ` [U-Boot] [PATCH 1/8] arm: Remove colibri_pxa270 board Simon Glass
2016-10-20 19:06 ` [U-Boot] [PATCH 2/8] arm: Remove h2200 board Simon Glass
2016-10-20 19:06 ` [U-Boot] [PATCH 3/8] arm: Remove zipitz2 board Simon Glass
2016-10-20 19:06 ` [U-Boot] [PATCH 4/8] arm: Drop pxa serial driver Simon Glass
2016-10-20 19:06 ` [U-Boot] [PATCH 5/8] serial: Update docs to indicate mcfuart supports DM_SERIAL Simon Glass
2016-10-20 19:06 ` Simon Glass [this message]
2016-10-20 19:06 ` [U-Boot] [PATCH 7/8] arm: Remove VCMA9 board Simon Glass
2016-10-20 19:07 ` [U-Boot] [PATCH 8/8] serial: Drop the s3c24x0 serial driver Simon Glass
2016-10-21 6:52 ` [U-Boot] [PATCH 0/8] dm: Update on serial driver progress Marcel Ziswiler
2016-10-21 8:10 ` Marek Vasut
2016-10-26 16:30 ` Simon Glass
2016-10-28 10:44 ` Marcel Ziswiler
2016-11-02 1:55 ` Simon Glass
2016-11-02 15:44 ` Marcel Ziswiler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1476990421-30259-7-git-send-email-sjg@chromium.org \
--to=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.