[U-Boot] [PATCH 7/8] arm: Remove VCMA9 board

[Simon Glass <sjg@chromium.org>]

This board has not been converted to DM_SERIAL by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

 arch/arm/Kconfig                |   5 -
 board/mpl/common/common_util.c  |  23 --
 board/mpl/vcma9/Kconfig         |  15 --
 board/mpl/vcma9/MAINTAINERS     |   6 -
 board/mpl/vcma9/Makefile        |  11 -
 board/mpl/vcma9/cmd_vcma9.c     | 119 ----------
 board/mpl/vcma9/lowlevel_init.S | 500 ----------------------------------------
 board/mpl/vcma9/vcma9.c         | 209 -----------------
 board/mpl/vcma9/vcma9.h         |  28 ---
 configs/VCMA9_defconfig         |  16 --
 include/configs/VCMA9.h         | 207 -----------------
 scripts/config_whitelist.txt    |   1 -
 12 files changed, 1140 deletions(-)
 delete mode 100644 board/mpl/vcma9/Kconfig
 delete mode 100644 board/mpl/vcma9/MAINTAINERS
 delete mode 100644 board/mpl/vcma9/Makefile
 delete mode 100644 board/mpl/vcma9/cmd_vcma9.c
 delete mode 100644 board/mpl/vcma9/lowlevel_init.S
 delete mode 100644 board/mpl/vcma9/vcma9.c
 delete mode 100644 board/mpl/vcma9/vcma9.h
 delete mode 100644 configs/VCMA9_defconfig
 delete mode 100644 include/configs/VCMA9.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6aa5208..5036379 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -137,10 +137,6 @@ config TARGET_EDB93XX
 	bool "Support edb93xx"
 	select CPU_ARM920T
 
-config TARGET_VCMA9
-	bool "Support VCMA9"
-	select CPU_ARM920T
-
 config TARGET_ASPENITE
 	bool "Support aspenite"
 	select CPU_ARM926EJS
@@ -969,7 +965,6 @@ source "board/gumstix/pepper/Kconfig"
 source "board/hisilicon/hikey/Kconfig"
 source "board/imx31_phycore/Kconfig"
 source "board/isee/igep0033/Kconfig"
-source "board/mpl/vcma9/Kconfig"
 source "board/olimex/mx23_olinuxino/Kconfig"
 source "board/phytec/pcm051/Kconfig"
 source "board/phytec/pcm052/Kconfig"
diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c
index 3c110fa..aa40d10 100644
--- a/board/mpl/common/common_util.c
+++ b/board/mpl/common/common_util.c
@@ -272,29 +272,6 @@ mpl_prg(uchar *src, ulong size)
 		return (1);
 	}
 #endif /* defined(CONFIG_PATI) */
-
-#elif defined(CONFIG_VCMA9)
-	start = 0;
-
-	/* search end sector */
-	for (i = 0; i < info->sector_count; i++)
-		if (size < info->start[i])
-		    break;
-
-	flash_protect(FLAG_PROTECT_CLEAR,
-		      start,
-		      size,
-		      info);
-
-	/* now erase flash */
-	printf("Erasing at %lx (sector %d) (start %lx)\n",
-				start,0,info->start[0]);
-	if ((rc = flash_erase (info, 0, i)) != 0) {
-		puts("ERROR ");
-		flash_perror(rc);
-		return (1);
-	}
-
 #endif
 	printf("flash erased, programming from 0x%lx 0x%lx Bytes\n",
 		(ulong)src, size);
diff --git a/board/mpl/vcma9/Kconfig b/board/mpl/vcma9/Kconfig
deleted file mode 100644
index a156452..0000000
--- a/board/mpl/vcma9/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_VCMA9
-
-config SYS_BOARD
-	default "vcma9"
-
-config SYS_VENDOR
-	default "mpl"
-
-config SYS_SOC
-	default "s3c24x0"
-
-config SYS_CONFIG_NAME
-	default "VCMA9"
-
-endif
diff --git a/board/mpl/vcma9/MAINTAINERS b/board/mpl/vcma9/MAINTAINERS
deleted file mode 100644
index 3817436..0000000
--- a/board/mpl/vcma9/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-VCMA9 BOARD
-M:	David M?ller <d.mueller@elsoft.ch>
-S:	Maintained
-F:	board/mpl/vcma9/
-F:	include/configs/VCMA9.h
-F:	configs/VCMA9_defconfig
diff --git a/board/mpl/vcma9/Makefile b/board/mpl/vcma9/Makefile
deleted file mode 100644
index 175a19f..0000000
--- a/board/mpl/vcma9/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= ../common/common_util.o
-obj-y	+= vcma9.o cmd_vcma9.o
-
-obj-y	+= lowlevel_init.o
diff --git a/board/mpl/vcma9/cmd_vcma9.c b/board/mpl/vcma9/cmd_vcma9.c
deleted file mode 100644
index c2d62e4..0000000
--- a/board/mpl/vcma9/cmd_vcma9.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * (C) Copyright 2002
- * Denis Peter, MPL AG Switzerland, d.peter at mpl.ch
- *
- * adapted for VCMA9
- * David Mueller, ELSOFT AG, d.mueller at elsoft.ch
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <net.h>
-#include "vcma9.h"
-#include "../common/common_util.h"
-
-#if defined(CONFIG_CS8900)
-#include <../drivers/net/cs8900.h>
-
-static uchar cs8900_chksum(ushort data)
-{
-	return((data >> 8) & 0x00FF) + (data & 0x00FF);
-}
-
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-int do_vcma9(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	struct eth_device *dev;
-	char cs8900_name[10];
-	if (strcmp(argv[1], "info") == 0)
-	{
-		vcma9_print_info();
-		return 0;
-	}
-#if defined(CONFIG_CS8900)
-	if (strcmp(argv[1], "cs8900") == 0) {
-		sprintf(cs8900_name, "%s-0", CS8900_DRIVERNAME);
-		dev = eth_get_dev_by_name(cs8900_name);
-		if (!dev) {
-			printf("Couldn't find CS8900 driver");
-			return 0;
-		}
-		if (strcmp(argv[2], "read") == 0) {
-			uchar addr; ushort data;
-
-			addr = simple_strtoul(argv[3], NULL, 16);
-			cs8900_e2prom_read(dev, addr, &data);
-			printf("0x%2.2X: 0x%4.4X\n", addr, data);
-		} else if (strcmp(argv[2], "write") == 0) {
-			uchar addr; ushort data;
-
-			addr = simple_strtoul(argv[3], NULL, 16);
-			data = simple_strtoul(argv[4], NULL, 16);
-			cs8900_e2prom_write(dev, addr, data);
-		} else if (strcmp(argv[2], "setaddr") == 0) {
-			uchar addr, i, csum; ushort data;
-			uchar ethaddr[6];
-
-			/* check for valid ethaddr */
-			if (eth_getenv_enetaddr("ethaddr", ethaddr)) {
-				addr = 1;
-				data = 0x2158;
-				cs8900_e2prom_write(dev, addr, data);
-				csum = cs8900_chksum(data);
-				addr++;
-				for (i = 0; i < 6; i+=2) {
-					data = ethaddr[i+1] << 8 |
-					       ethaddr[i];
-					cs8900_e2prom_write(dev, addr, data);
-					csum += cs8900_chksum(data);
-					addr++;
-				}
-				/* calculate header link byte */
-				data = 0xA100 | (addr * 2);
-				cs8900_e2prom_write(dev, 0, data);
-				csum += cs8900_chksum(data);
-				/* write checksum word */
-				cs8900_e2prom_write(dev, addr, (0 - csum) << 8);
-			} else {
-				puts("\nplease defined 'ethaddr'\n");
-			}
-		} else if (strcmp(argv[2], "dump") == 0) {
-			uchar addr = 0, endaddr, csum; ushort data;
-
-			puts("Dump of CS8900 config device: ");
-			cs8900_e2prom_read(dev, addr, &data);
-			if ((data & 0xE000) == 0xA000) {
-				endaddr = (data & 0x00FF) / 2;
-				csum = cs8900_chksum(data);
-				for (addr = 1; addr <= endaddr; addr++) {
-					cs8900_e2prom_read(dev, addr, &data);
-					printf("\n0x%2.2X: 0x%4.4X", addr, data);
-					csum += cs8900_chksum(data);
-				}
-				printf("\nChecksum: %s", (csum == 0) ? "ok" : "wrong");
-			} else {
-				puts("no valid config found");
-			}
-			puts("\n");
-		}
-
-		return 0;
-	}
-#endif
-
-	return (do_mplcommon(cmdtp, flag, argc, argv));
-}
-
-U_BOOT_CMD(
-	vcma9, 6, 1, do_vcma9,
-	"VCMA9 specific commands",
-	"flash mem [SrcAddr] - updates U-Boot with image in memory\n"
-	"vcma9 info                - displays board information"
-);
diff --git a/board/mpl/vcma9/lowlevel_init.S b/board/mpl/vcma9/lowlevel_init.S
deleted file mode 100644
index c0d6cc8..0000000
--- a/board/mpl/vcma9/lowlevel_init.S
+++ /dev/null
@@ -1,500 +0,0 @@
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
- *                     Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
- *
- * Modified for MPL VCMA9 by
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- * (C) Copyright 2002, 2003, 2004, 2005
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-
-#include <config.h>
-
-/* register definitions */
-
-#define PLD_BASE	0x28000000
-#define MISC_REG	0x103
-#define SDRAM_REG	0x106
-#define BWSCON		0x48000000
-#define CLKBASE		0x4C000000
-#define LOCKTIME	0x0
-#define MPLLCON		0x4
-#define UPLLCON		0x8
-#define GPIOBASE	0x56000000
-#define GSTATUS1	0xB0
-#define FASTCPU		0x02
-
-/* some parameters for the board */
-/* BWSCON */
-#define DW8			(0x0)
-#define DW16			(0x1)
-#define DW32			(0x2)
-#define WAIT			(0x1<<2)
-#define UBLB			(0x1<<3)
-
-/* BANKSIZE */
-#define BURST_EN		(0x1<<7)
-
-/* BANK0CON 200 */
-#define B0_Tacs_200		0x0	/*  0clk  (or 0x1 1clk) */
-#define B0_Tcos_200		0x1	/*  1clk  (or 0x2 2clk) */
-#define B0_Tacc_200		0x5	/*  8clk  (or 0x6 10clk) */
-#define B0_Tcoh_200		0x0	/*  0clk */
-#define B0_Tcah_200		0x3	/*  4clk  (or0x01 1clk) */
-#define B0_Tacp_200		0x0     /* page mode is not used */
-#define B0_PMC_200		0x0	/* page mode disabled */
-
-/* BANK0CON 250 */
-#define B0_Tacs_250		0x0	/*  0clk  (or 0x1 1clk) */
-#define B0_Tcos_250		0x1	/*  1clk  (or 0x2 2clk) */
-#define B0_Tacc_250		0x5	/*  8clk  (or 0x7 14clk) */
-#define B0_Tcoh_250		0x0	/*  0clk */
-#define B0_Tcah_250		0x3	/*  4clk  (or 0x1 1clk) */
-#define B0_Tacp_250		0x0     /* page mode is not used */
-#define B0_PMC_250		0x0	/* page mode disabled */
-
-/* BANK0CON 266 */
-#define B0_Tacs_266		0x0	/*  0clk  (or 0x1 1clk) */
-#define B0_Tcos_266		0x1	/*  1clk  (or 0x2 2clk) */
-#define B0_Tacc_266		0x6	/*  10clk (or 0x7 14clk) */
-#define B0_Tcoh_266		0x0	/*  0clk */
-#define B0_Tcah_266		0x3	/*  4clk  (or 0x1 1clk) */
-#define B0_Tacp_266		0x0     /* page mode is not used */
-#define B0_PMC_266		0x0	/* page mode disabled */
-
-/* BANK1CON 200 */
-#define B1_Tacs_200		0x0	/*  0clk  (or 0x1 1clk) */
-#define B1_Tcos_200		0x1	/*  1clk  (or 0x2 2clk) */
-#define B1_Tacc_200		0x5	/*  8clk  (or 0x6 10clk) */
-#define B1_Tcoh_200		0x0	/*  0clk */
-#define B1_Tcah_200		0x3	/*  4clk  (or 0x1 1clk) */
-#define B1_Tacp_200		0x0     /* page mode is not used */
-#define B1_PMC_200		0x0	/* page mode disabled */
-
-/* BANK1CON 250 */
-#define B1_Tacs_250		0x0	/*  0clk  (or 0x1 1clk) */
-#define B1_Tcos_250		0x1	/*  1clk  (or 0x2 2clk) */
-#define B1_Tacc_250		0x5	/*  8clk  (or 0x7 14clk) */
-#define B1_Tcoh_250		0x0	/*  0clk */
-#define B1_Tcah_250		0x3	/*  4clk  (or 0x1 1clk) */
-#define B1_Tacp_250		0x0     /* page mode is not used */
-#define B1_PMC_250		0x0	/* page mode disabled */
-
-/* BANK1CON 266 */
-#define B1_Tacs_266		0x0	/*  0clk  (or 0x1 1clk) */
-#define B1_Tcos_266		0x1	/*  1clk  (or 0x2 2clk) */
-#define B1_Tacc_266		0x6	/*  10clk (or 0x7 14clk) */
-#define B1_Tcoh_266		0x0	/*  0clk */
-#define B1_Tcah_266		0x3	/*  4clk  (or 0x1 1clk) */
-#define B1_Tacp_266		0x0     /* page mode is not used */
-#define B1_PMC_266		0x0	/* page mode disabled */
-
-/* BANK2CON 200 + 250 + 266 */
-#define B2_Tacs			0x3	/*  4clk */
-#define B2_Tcos			0x3	/*  4clk */
-#define B2_Tacc			0x7     /* 14clk */
-#define B2_Tcoh			0x3	/*  4clk */
-#define B2_Tcah			0x3	/*  4clk */
-#define B2_Tacp			0x0	/* page mode is not used */
-#define B2_PMC			0x0     /* page mode disabled */
-
-/* BANK3CON 200 + 250 + 266 */
-#define B3_Tacs			0x3	/*  4clk */
-#define B3_Tcos			0x3	/*  4clk */
-#define B3_Tacc			0x7     /* 14clk */
-#define B3_Tcoh			0x3	/*  4clk */
-#define B3_Tcah			0x3	/*  4clk */
-#define B3_Tacp			0x0	/* page mode is not used */
-#define B3_PMC			0x0     /* page mode disabled */
-
-/* BANK4CON 200 */
-#define B4_Tacs_200		0x1	/*  1clk */
-#define B4_Tcos_200		0x3	/*  4clk */
-#define B4_Tacc_200		0x7	/* 14clk */
-#define B4_Tcoh_200		0x3	/*  4clk */
-#define B4_Tcah_200		0x2	/*  2clk */
-#define B4_Tacp_200		0x0     /* page mode is not used */
-#define B4_PMC_200		0x0	/* page mode disabled */
-
-/* BANK4CON 250 */
-#define B4_Tacs_250		0x1	/*  1clk */
-#define B4_Tcos_250		0x3	/*  4clk */
-#define B4_Tacc_250		0x7	/* 14clk */
-#define B4_Tcoh_250		0x3	/*  4clk */
-#define B4_Tcah_250		0x2	/*  2clk */
-#define B4_Tacp_250		0x0     /* page mode is not used */
-#define B4_PMC_250		0x0	/* page mode disabled */
-
-/* BANK4CON 266 */
-#define B4_Tacs_266		0x1	/*  1clk */
-#define B4_Tcos_266		0x3	/*  4clk */
-#define B4_Tacc_266		0x7	/* 14clk */
-#define B4_Tcoh_266		0x3	/*  4clk */
-#define B4_Tcah_266		0x2	/*  2clk */
-#define B4_Tacp_266		0x0     /* page mode is not used */
-#define B4_PMC_266		0x0	/* page mode disabled */
-
-/* BANK5CON 200 */
-#define B5_Tacs_200		0x0	/*  0clk */
-#define B5_Tcos_200		0x3	/*  4clk */
-#define B5_Tacc_200		0x4	/*  6clk */
-#define B5_Tcoh_200		0x3	/*  4clk */
-#define B5_Tcah_200		0x1	/*  1clk */
-#define B5_Tacp_200		0x0     /* page mode is not used */
-#define B5_PMC_200		0x0	/* page mode disabled */
-
-/* BANK5CON 250 */
-#define B5_Tacs_250		0x0	/*  0clk */
-#define B5_Tcos_250		0x3	/*  4clk */
-#define B5_Tacc_250		0x5	/*  8clk */
-#define B5_Tcoh_250		0x3	/*  4clk */
-#define B5_Tcah_250		0x1	/*  1clk */
-#define B5_Tacp_250		0x0     /* page mode is not used */
-#define B5_PMC_250		0x0	/* page mode disabled */
-
-/* BANK5CON 266 */
-#define B5_Tacs_266		0x0	/*  0clk */
-#define B5_Tcos_266		0x3	/*  4clk */
-#define B5_Tacc_266		0x5	/*  8clk */
-#define B5_Tcoh_266		0x3	/*  4clk */
-#define B5_Tcah_266		0x1	/*  1clk */
-#define B5_Tacp_266		0x0     /* page mode is not used */
-#define B5_PMC_266		0x0	/* page mode disabled */
-
-#define B6_MT			0x3	/* SDRAM */
-#define B6_Trcd_200		0x0	/* 2clk */
-#define B6_Trcd_250		0x1	/* 3clk */
-#define B6_Trcd_266		0x1	/* 3clk */
-#define B6_SCAN			0x2	/* 10bit */
-
-#define B7_MT			0x3	/* SDRAM */
-#define B7_Trcd_200		0x0	/* 2clk */
-#define B7_Trcd_250		0x1	/* 3clk */
-#define B7_Trcd_266		0x1	/* 3clk */
-#define B7_SCAN			0x2	/* 10bit */
-
-/* REFRESH parameter */
-#define REFEN			0x1	/* Refresh enable */
-#define TREFMD			0x0	/* CBR(CAS before RAS)/Auto refresh */
-#define Trp_200			0x0	/* 2clk */
-#define Trp_250			0x1	/* 3clk */
-#define Trp_266			0x1	/* 3clk */
-#define Tsrc_200		0x1	/* 5clk */
-#define Tsrc_250		0x2	/* 6clk */
-#define Tsrc_266		0x3	/* 7clk */
-
-/* period=15.6us, HCLK=100Mhz, (2048+1-15.6*100) */
-#define REFCNT_200		489
-/* period=15.6us, HCLK=125Mhz, (2048+1-15.6*125) */
-#define REFCNT_250		99
-/* period=15.6us, HCLK=133Mhz, (2048+1-15.6*133) */
-#define REFCNT_266		0
-/**************************************/
-
-.globl lowlevel_init
-lowlevel_init:
-	/* use r0 to relocate DATA read/write to flash rather than memory ! */
-	ldr	r0, =CONFIG_SYS_TEXT_BASE
-	ldr	r13, =BWSCON
-
-	/* enable minimal access to PLD */
-	ldr	r1, [r13]			/* load default BWSCON */
-	orr	r1, r1, #(DW8 + UBLB) << 20	/* set necessary CS attrs */
-	str	r1, [r13]			/* set BWSCON */
-	ldr	r1, =0x7FF0			/* select slowest timing */
-	str	r1, [r13, #0x18]		/* set BANKCON5 */
-
-	ldr	r1, =PLD_BASE
-	ldr	r2, =SETUPDATA
-	ldrb	r1, [r1, #MISC_REG]
-	sub	r2, r2, r0
-	tst	r1, #FASTCPU			/* FASTCPU available ? */
-	addeq	r2, r2, #SETUPENTRY_SIZE
-
-	/* memory control configuration */
-	/* r2 = pointer into timing table */
-	/* r13 = pointer to MEM controller regs (starting with BWSCON) */
-	add     r3, r2, #CSDATA_OFFSET
-	add     r4, r3, #CSDATAENTRY_SIZE
-0:
-	ldr     r1, [r3], #4
-	str     r1, [r13], #4
-	cmp     r3, r4
-	bne     0b
-
-	/* PLD access is now possible */
-	/* r3 = SDRAMDATA */
-	/* r13 = pointer to MEM controller regs */
-	ldr	r1, =PLD_BASE
-	mov	r4, #SDRAMENTRY_SIZE
-	ldrb	r1, [r1, #SDRAM_REG]
-	/* calculate start and end point */
-	mla	r3, r4, r1, r3
-	add     r4, r3, r4
-0:
-	ldr     r1, [r3], #4
-	str     r1, [r13], #4
-	cmp     r3, r4
-	bne     0b
-
-	/* setup MPLL registers */
-	ldr	r1, =CLKBASE
-	ldr	r4, =0xFFFFFF
-	add	r3, r2, #4		/* r3 points to PLL values */
-	str	r4, [r1, #LOCKTIME]
-	ldmia	r3, {r4,r5}
-	str	r5, [r1, #UPLLCON]	/* writing PLL register */
-					/* !! order seems to be important !! */
-	/* a little delay */
-	ldr	r3, =0x4000
-0:
-	subs	r3, r3, #1
-	bne	0b
-
-	str	r4, [r1, #MPLLCON]	/* writing PLL register */
-					/* !! order seems to be important !! */
-	/* a little delay */
-	ldr	r3, =0x4000
-0:
-	subs	r3, r3, #1
-	bne	0b
-
-	/* everything is fine now */
-	mov	pc, lr
-
-	.ltorg
-/* the literal pools origin */
-
-#define MK_BWSCON(bws1, bws2, bws3, bws4, bws5, bws6, bws7) \
-	((bws1) << 4) + \
-	((bws2) << 8) + \
-	((bws3) << 12) + \
-	((bws4) << 16) + \
-	((bws5) << 20) + \
-	((bws6) << 24) + \
-	((bws7) << 28)
-
-#define MK_BANKCON(tacs, tcos, tacc, tcoh, tcah, tacp, pmc) \
-	((tacs) << 13) + \
-	((tcos) << 11) + \
-	((tacc) << 8) + \
-	((tcoh) << 6) + \
-	((tcah) << 4) + \
-	((tacp) << 2) + \
-	(pmc)
-
-#define MK_BANKCON_SDRAM(trcd, scan) \
-	((0x03) << 15) + \
-	((trcd) << 2) + \
-	(scan)
-
-#define MK_SDRAM_REFRESH(enable, trefmd, trp, tsrc, cnt) \
-	((enable) << 23) + \
-	((trefmd) << 22) + \
-	((trp) << 20) + \
-	((tsrc) << 18) + \
-	(cnt)
-
-SETUPDATA:
-	.word 0x32410002
-	/* PLL values (MDIV, PDIV, SDIV) for 250 MHz */
-	.word (0x75 << 12) + (0x01 << 4) + (0x01 << 0)
-	/* PLL values for USB clock */
-	.word (0x48 << 12) + (0x03 << 4) + (0x02 << 0)
-
-	/* timing for 250 MHz*/
-0:
-	.equiv CSDATA_OFFSET, (. - SETUPDATA)
-	.word MK_BWSCON(DW16, \
-			DW32, \
-			DW32, \
-			DW16 + WAIT + UBLB, \
-			DW8 + UBLB, \
-			DW32, \
-			DW32)
-
-	.word MK_BANKCON(B0_Tacs_250, \
-			 B0_Tcos_250, \
-			 B0_Tacc_250, \
-			 B0_Tcoh_250, \
-			 B0_Tcah_250, \
-			 B0_Tacp_250, \
-			 B0_PMC_250)
-
-	.word MK_BANKCON(B1_Tacs_250, \
-			 B1_Tcos_250, \
-			 B1_Tacc_250, \
-			 B1_Tcoh_250, \
-			 B1_Tcah_250, \
-			 B1_Tacp_250, \
-			 B1_PMC_250)
-
-	.word MK_BANKCON(B2_Tacs, \
-			 B2_Tcos, \
-			 B2_Tacc, \
-			 B2_Tcoh, \
-			 B2_Tcah, \
-			 B2_Tacp, \
-			 B2_PMC)
-
-	.word MK_BANKCON(B3_Tacs, \
-			 B3_Tcos, \
-			 B3_Tacc, \
-			 B3_Tcoh, \
-			 B3_Tcah, \
-			 B3_Tacp, \
-			 B3_PMC)
-
-	.word MK_BANKCON(B4_Tacs_250, \
-			 B4_Tcos_250, \
-			 B4_Tacc_250, \
-			 B4_Tcoh_250, \
-			 B4_Tcah_250, \
-			 B4_Tacp_250, \
-			 B4_PMC_250)
-
-	.word MK_BANKCON(B5_Tacs_250, \
-			 B5_Tcos_250, \
-			 B5_Tacc_250, \
-			 B5_Tcoh_250, \
-			 B5_Tcah_250, \
-			 B5_Tacp_250, \
-			 B5_PMC_250)
-
-	.equiv CSDATAENTRY_SIZE, (. - 0b)
-	/* 4Mx8x4 */
-0:
-	.word MK_BANKCON_SDRAM(B6_Trcd_250, B6_SCAN)
-	.word MK_BANKCON_SDRAM(B7_Trcd_250, B7_SCAN)
-	.word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_250, Tsrc_250, REFCNT_250)
-	.word 0x32 + BURST_EN
-	.word 0x30
-	.word 0x30
-	.equiv SDRAMENTRY_SIZE, (. - 0b)
-
-	/* 8Mx8x4 */
-	.word MK_BANKCON_SDRAM(B6_Trcd_250, B6_SCAN)
-	.word MK_BANKCON_SDRAM(B7_Trcd_250, B7_SCAN)
-	.word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_250, Tsrc_250, REFCNT_250)
-	.word 0x32 + BURST_EN
-	.word 0x30
-	.word 0x30
-
-	/* 2Mx8x4 */
-	.word MK_BANKCON_SDRAM(B6_Trcd_250, B6_SCAN)
-	.word MK_BANKCON_SDRAM(B7_Trcd_250, B7_SCAN)
-	.word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_250, Tsrc_250, REFCNT_250)
-	.word 0x32 + BURST_EN
-	.word 0x30
-	.word 0x30
-
-	/* 4Mx8x2 */
-	.word MK_BANKCON_SDRAM(B6_Trcd_250, B6_SCAN)
-	.word MK_BANKCON_SDRAM(B7_Trcd_250, B7_SCAN)
-	.word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_250, Tsrc_250, REFCNT_250)
-	.word 0x32 + BURST_EN
-	.word 0x30
-	.word 0x30
-
-	.equiv SETUPENTRY_SIZE, (. - SETUPDATA)
-
-	.word 0x32410000
-	/* PLL values (MDIV, PDIV, SDIV) for 200 MHz (Fout = 202.8MHz) */
-	.word (0xA1 << 12) + (0x03 << 4) + (0x01 << 0)
-	/* PLL values for USB clock */
-	.word (0x48 << 12) + (0x03 << 4) + (0x02 << 0)
-
-	/* timing for 200 MHz and default*/
-	.word MK_BWSCON(DW16, \
-			DW32, \
-			DW32, \
-			DW16 + WAIT + UBLB, \
-			DW8 + UBLB, \
-			DW32, \
-			DW32)
-
-	.word MK_BANKCON(B0_Tacs_200, \
-			 B0_Tcos_200, \
-			 B0_Tacc_200, \
-			 B0_Tcoh_200, \
-			 B0_Tcah_200, \
-			 B0_Tacp_200, \
-			 B0_PMC_200)
-
-	.word MK_BANKCON(B1_Tacs_200, \
-			 B1_Tcos_200, \
-			 B1_Tacc_200, \
-			 B1_Tcoh_200, \
-			 B1_Tcah_200, \
-			 B1_Tacp_200, \
-			 B1_PMC_200)
-
-	.word MK_BANKCON(B2_Tacs, \
-			 B2_Tcos, \
-			 B2_Tacc, \
-			 B2_Tcoh, \
-			 B2_Tcah, \
-			 B2_Tacp, \
-			 B2_PMC)
-
-	.word MK_BANKCON(B3_Tacs, \
-			 B3_Tcos, \
-			 B3_Tacc, \
-			 B3_Tcoh, \
-			 B3_Tcah, \
-			 B3_Tacp, \
-			 B3_PMC)
-
-	.word MK_BANKCON(B4_Tacs_200, \
-			 B4_Tcos_200, \
-			 B4_Tacc_200, \
-			 B4_Tcoh_200, \
-			 B4_Tcah_200, \
-			 B4_Tacp_200, \
-			 B4_PMC_200)
-
-	.word MK_BANKCON(B5_Tacs_200, \
-			 B5_Tcos_200, \
-			 B5_Tacc_200, \
-			 B5_Tcoh_200, \
-			 B5_Tcah_200, \
-			 B5_Tacp_200, \
-			 B5_PMC_200)
-
-	/* 4Mx8x4 */
-	.word MK_BANKCON_SDRAM(B6_Trcd_200, B6_SCAN)
-	.word MK_BANKCON_SDRAM(B7_Trcd_200, B7_SCAN)
-	.word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_200, Tsrc_200, REFCNT_200)
-	.word 0x32 + BURST_EN
-	.word 0x30
-	.word 0x30
-
-	/* 8Mx8x4 */
-	.word MK_BANKCON_SDRAM(B6_Trcd_200, B6_SCAN)
-	.word MK_BANKCON_SDRAM(B7_Trcd_200, B7_SCAN)
-	.word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_200, Tsrc_200, REFCNT_200)
-	.word 0x32 + BURST_EN
-	.word 0x30
-	.word 0x30
-
-	/* 2Mx8x4 */
-	.word MK_BANKCON_SDRAM(B6_Trcd_200, B6_SCAN)
-	.word MK_BANKCON_SDRAM(B7_Trcd_200, B7_SCAN)
-	.word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_200, Tsrc_200, REFCNT_200)
-	.word 0x32 + BURST_EN
-	.word 0x30
-	.word 0x30
-
-	/* 4Mx8x2 */
-	.word MK_BANKCON_SDRAM(B6_Trcd_200, B6_SCAN)
-	.word MK_BANKCON_SDRAM(B7_Trcd_200, B7_SCAN)
-	.word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_200, Tsrc_200, REFCNT_200)
-	.word 0x32 + BURST_EN
-	.word 0x30
-	.word 0x30
-
-	.equiv SETUPDATA_SIZE, (. - SETUPDATA)
diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c
deleted file mode 100644
index 43a3d47..0000000
--- a/board/mpl/vcma9/vcma9.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002, 2010
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <i2c.h>
-#include <asm/io.h>
-#include <asm/arch/s3c24x0_cpu.h>
-
-#include "vcma9.h"
-#include "../common/common_util.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_early_init_f(void)
-{
-	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
-
-	/* set up the I/O ports */
-	writel(0x007FFFFF, &gpio->gpacon);
-	writel(0x002AAAAA, &gpio->gpbcon);
-	writel(0x000002BF, &gpio->gpbup);
-	writel(0xAAAAAAAA, &gpio->gpccon);
-	writel(0x0000FFFF, &gpio->gpcup);
-	writel(0xAAAAAAAA, &gpio->gpdcon);
-	writel(0x0000FFFF, &gpio->gpdup);
-	writel(0xAAAAAAAA, &gpio->gpecon);
-	writel(0x000037F7, &gpio->gpeup);
-	writel(0x00000000, &gpio->gpfcon);
-	writel(0x00000000, &gpio->gpfup);
-	writel(0xFFEAFF5A, &gpio->gpgcon);
-	writel(0x0000F0DC, &gpio->gpgup);
-	writel(0x0028AAAA, &gpio->gphcon);
-	writel(0x00000656, &gpio->gphup);
-
-	/* setup correct IRQ modes for NIC (rising edge mode) */
-	writel((readl(&gpio->extint2) & ~(7<<8)) | (4<<8),  &gpio->extint2);
-
-	/* select USB port 2 to be host or device (setup as host for now) */
-	writel(readl(&gpio->misccr) | 0x08, &gpio->misccr);
-
-	return 0;
-}
-
-int board_init(void)
-{
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0x30000100;
-
-	icache_enable();
-	dcache_enable();
-
-	return 0;
-}
-
-/*
- * Get some Board/PLD Info
- */
-
-static u8 get_pld_reg(enum vcma9_pld_regs reg)
-{
-	return readb(VCMA9_PLD_BASE + reg);
-}
-
-static u8 get_pld_version(void)
-{
-	return (get_pld_reg(VCMA9_PLD_ID) >> 4) & 0x0F;
-}
-
-static u8 get_pld_revision(void)
-{
-	return get_pld_reg(VCMA9_PLD_ID) & 0x0F;
-}
-
-static uchar get_board_pcb(void)
-{
-	return ((get_pld_reg(VCMA9_PLD_BOARD) >> 4) & 0x03) + 'A';
-}
-
-static u8 get_nr_chips(void)
-{
-	switch ((get_pld_reg(VCMA9_PLD_SDRAM) >> 4) & 0x0F) {
-		case 0: return 4;
-		case 1: return 1;
-		case 2: return 2;
-		default: return 0;
-	}
-}
-
-static ulong get_chip_size(void)
-{
-	switch (get_pld_reg(VCMA9_PLD_SDRAM) & 0x0F) {
-		case 0: return 16 * (1024*1024);
-		case 1: return 32 * (1024*1024);
-		case 2: return  8 * (1024*1024);
-		case 3: return  8 * (1024*1024);
-		default: return 0;
-	}
-}
-
-static const char *get_chip_geom(void)
-{
-	switch (get_pld_reg(VCMA9_PLD_SDRAM) & 0x0F) {
-		case 0: return "4Mx8x4";
-		case 1: return "8Mx8x4";
-		case 2: return "2Mx8x4";
-		case 3: return "4Mx8x2";
-		default: return "unknown";
-	}
-}
-
-static void vcma9_show_info(char *board_name, char *serial)
-{
-	printf("Board: %s SN: %s  PCB Rev: %c PLD(%d,%d)\n",
-		board_name, serial,
-		get_board_pcb(), get_pld_version(), get_pld_revision());
-	printf("SDRAM: %d chips %s\n", get_nr_chips(), get_chip_geom());
-}
-
-int dram_init(void)
-{
-	/* dram_init must store complete ramsize in gd->ram_size */
-	gd->ram_size = get_chip_size() * get_nr_chips();
-	return 0;
-}
-
-/*
- * Check Board Identity:
- */
-
-int checkboard(void)
-{
-	char s[50];
-	int i;
-	backup_t *b = (backup_t *) s;
-
-	i = getenv_f("serial#", s, 32);
-	if ((i < 0) || strncmp (s, "VCMA9", 5)) {
-		get_backup_values (b);
-		if (strncmp (b->signature, "MPL\0", 4) != 0) {
-			puts ("### No HW ID - assuming VCMA9");
-		} else {
-			b->serial_name[5] = 0;
-			vcma9_show_info(b->serial_name, &b->serial_name[6]);
-		}
-	} else {
-		s[5] = 0;
-		vcma9_show_info(s, &s[6]);
-	}
-
-	return 0;
-}
-
-int board_late_init(void)
-{
-	/*
-	 * check if environment is healthy, otherwise restore values
-	 * from shadow copy
-	 */
-	check_env();
-	return 0;
-}
-
-void vcma9_print_info(void)
-{
-	char *s = getenv("serial#");
-
-	if (!s) {
-		puts ("### No HW ID - assuming VCMA9");
-	} else {
-		s[5] = 0;
-		vcma9_show_info(s, &s[6]);
-	}
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_CS8900
-	rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
-	return rc;
-}
-#endif
-
-/*
- * Hardcoded flash setup:
- * Flash 0 is a non-CFI AMD AM29F400BB flash.
- */
-ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
-{
-	info->portwidth = FLASH_CFI_16BIT;
-	info->chipwidth = FLASH_CFI_BY16;
-	info->interface = FLASH_CFI_X16;
-	return 1;
-}
diff --git a/board/mpl/vcma9/vcma9.h b/board/mpl/vcma9/vcma9.h
deleted file mode 100644
index c585c8e..0000000
--- a/board/mpl/vcma9/vcma9.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * (C) Copyright 2002, 2003
- * David Mueller, ELSOFT AG, d.mueller at elsoft.ch
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
- /****************************************************************************
- * Global routines used for VCMA9
- *****************************************************************************/
-
-#include <asm/arch/s3c24x0_cpu.h>
-
-extern void vcma9_print_info(void);
-extern int do_mplcommon(cmd_tbl_t *cmdtp, int flag,
-			int argc, char *const argv[]);
-
-/* VCMA9 PLD registers */
-enum vcma9_pld_regs {
-	VCMA9_PLD_ID,
-	VCMA9_PLD_NIC,
-	VCMA9_PLD_CAN,
-	VCMA9_PLD_MISC,
-	VCMA9_PLD_GPCD,
-	VCMA9_PLD_BOARD,
-	VCMA9_PLD_SDRAM
-};
-
-#define VCMA9_PLD_BASE	(0x2C000100)
diff --git a/configs/VCMA9_defconfig b/configs/VCMA9_defconfig
deleted file mode 100644
index da568a1..0000000
--- a/configs/VCMA9_defconfig
+++ /dev/null
@@ -1,16 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_VCMA9=y
-CONFIG_IDENT_STRING="\n(c) 2003 - 2011 by MPL AG Switzerland, MEV-10080-001 unstable"
-CONFIG_BOOTDELAY=5
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="VCMA9 # "
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_UBI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
deleted file mode 100644
index e012417..0000000
--- a/include/configs/VCMA9.h
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * (C) Copyright 2002, 2003
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- * Gary Jennejohn <garyj@denx.de>
- * David Mueller <d.mueller@elsoft.ch>
- *
- * Configuation settings for the MPL VCMA9 board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define MACH_TYPE_MPL_VCMA9	227
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SYS_THUMB_BUILD
-
-#define CONFIG_S3C24X0		/* This is a SAMSUNG S3C24x0-type SoC */
-#define CONFIG_S3C2410		/* specifically a SAMSUNG S3C2410 SoC */
-#define CONFIG_VCMA9		/* on a MPL VCMA9 Board  */
-#define CONFIG_MACH_TYPE	MACH_TYPE_MPL_VCMA9 /* Machine type */
-
-#define CONFIG_SYS_TEXT_BASE	0x0
-
-#define CONFIG_SYS_ARM_CACHE_WRITETHROUGH
-
-/* input clock of PLL (VCMA9 has 12MHz input clock) */
-#define CONFIG_SYS_CLK_FREQ	12000000
-
-#define CONFIG_CMDLINE_TAG	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_NAND
-
-#define CONFIG_BOARD_LATE_INIT
-
-#define CONFIG_CMDLINE_EDITING
-
-/*
- * I2C stuff:
- * the MPL VCMA9 is equipped with an ATMEL 24C256 EEPROM at
- * address 0x50 with 16bit addressing
- */
-#define CONFIG_SYS_I2C
-
-/* we use the built-in I2C controller */
-#define CONFIG_SYS_I2C_S3C24X0
-#define CONFIG_SYS_I2C_S3C24X0_SPEED    100000	/* I2C speed */
-#define CONFIG_SYS_I2C_S3C24X0_SLAVE    0x7F	/* I2C slave addr */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
-/* use EEPROM for environment vars */
-#define CONFIG_ENV_IS_IN_EEPROM		1
-/* environment starts at offset 0 */
-#define CONFIG_ENV_OFFSET		0x000
-/* 2KB should be more than enough */
-#define CONFIG_ENV_SIZE			0x800
-
-#undef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
-/* 64 bytes page write mode on 24C256 */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-
-/*
- * Hardware drivers
- */
-#define CONFIG_CS8900			/* we have a CS8900 on-board */
-#define CONFIG_CS8900_BASE		0x20000300
-#define CONFIG_CS8900_BUS16
-
-/*
- * select serial console configuration
- */
-#define CONFIG_S3C24X0_SERIAL
-#define CONFIG_SERIAL1		1	/* we use SERIAL 1 on VCMA9 */
-
-/* USB support (currently only works with D-cache off) */
-#define CONFIG_USB_OHCI
-#define CONFIG_USB_OHCI_S3C24XX
-#define CONFIG_USB_KEYBOARD
-#define CONFIG_DOS_PARTITION
-
-/* Enable needed helper functions */
-#define CONFIG_SYS_STDIO_DEREGISTER	/* needs stdio_deregister */
-
-/* RTC */
-#define CONFIG_RTC_S3C24X0
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE			9600
-
-#define CONFIG_BOOT_RETRY_TIME		-1
-#define CONFIG_RESET_TO_RETRY
-
-#define CONFIG_NETMASK			255.255.255.0
-#define CONFIG_IPADDR			10.0.0.110
-#define CONFIG_SERVERIP			10.0.0.1
-
-#if defined(CONFIG_CMD_KGDB)
-/* speed to run kgdb serial port */
-#define CONFIG_KGDB_BAUDRATE		115200
-#endif
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_CBSIZE		256
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS		16
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START	0x30000000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x31FFFFFF	/* 32 MB in DRAM */
-
-#define CONFIG_SYS_ALT_MEMTEST
-#define CONFIG_SYS_LOAD_ADDR		0x30800000
-
-/* we configure PWM Timer 4 to 1ms 1000Hz  */
-
-/* support additional compression methods */
-#define CONFIG_BZIP2
-#define CONFIG_LZO
-#define CONFIG_LZMA
-
-/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1		0x30000000	/* SDRAM Bank #1 */
-#define PHYS_FLASH_1		0x00000000	/* Flash Bank #1 */
-
-#define CONFIG_SYS_FLASH_BASE	PHYS_FLASH_1
-
-/* FLASH and environment organization */
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_FLASH_CFI_LEGACY
-#define CONFIG_SYS_FLASH_LEGACY_512Kx16
-#define CONFIG_FLASH_SHOW_PROGRESS	45
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
-#define CONFIG_SYS_MAX_FLASH_SECT	(19)
-
-/*
- * Size of malloc() pool
- * BZIP2 / LZO / LZMA need a lot of RAM
- */
-#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
-#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
-
-/* NAND configuration */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_S3C2410
-#define CONFIG_SYS_S3C2410_NAND_HWECC
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		0x4E000000
-#define CONFIG_S3C24XX_CUSTOM_NAND_TIMING
-#define CONFIG_S3C24XX_TACLS		1
-#define CONFIG_S3C24XX_TWRPH0		5
-#define CONFIG_S3C24XX_TWRPH1		3
-#endif
-
-#define MULTI_PURPOSE_SOCKET_ADDR	0x08000000
-
-/* File system */
-#define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_JFFS2
-#define CONFIG_YAFFS2
-#define CONFIG_RBTREE
-#define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_LZO
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - \
-					GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_BOARD_EARLY_INIT_F
-
-#endif /* __CONFIG_H */
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 337407f..b637599 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -8253,7 +8253,6 @@ CONFIG_U_QE
 CONFIG_V38B
 CONFIG_VAL
 CONFIG_VAR_SIZE_SPL
-CONFIG_VCMA9
 CONFIG_VCO_HZ
 CONFIG_VCO_MULT
 CONFIG_VCT_NOR
-- 
2.8.0.rc3.226.g39d4020