All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tero Kristo <t-kristo@ti.com>
To: linux-clk@vger.kernel.org, mturquette@baylibre.com,
	sboyd@codeaurora.org, ssantosh@kernel.org
Cc: nm@ti.com, linux-arm-kernel@lists.infradead.org,
	devicetree@vger.kernel.org
Subject: [PATCH 1/3] Documentation: dt: Add TI SCI clock driver
Date: Fri, 21 Oct 2016 15:45:59 +0300	[thread overview]
Message-ID: <1477053961-27128-2-git-send-email-t-kristo@ti.com> (raw)
In-Reply-To: <1477053961-27128-1-git-send-email-t-kristo@ti.com>

Add a clock implementation, TI SCI clock, that will hook to the common
clock framework, and allow each clock to be controlled via TI SCI
protocol.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/clock/ti,sci-clk.txt       | 37 ++++++++++++++++++++++
 MAINTAINERS                                        |  1 +
 2 files changed, 38 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/ti,sci-clk.txt

diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt
new file mode 100644
index 0000000..bfc3ca4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt
@@ -0,0 +1,37 @@
+Texas Instruments TI-SCI Clocks
+===============================
+
+All clocks on Texas Instruments' SoCs that contain a System Controller,
+are only controlled by this entity. Communication between a host processor
+running an OS and the System Controller happens through a protocol known
+as TI-SCI[1]. This clock implementation plugs into the common clock
+framework and makes use of the TI-SCI protocol on clock API requests.
+
+[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
+
+Required properties:
+-------------------
+- compatible: Must be "ti,k2g-sci-clk"
+- #clock-cells: Shall be 2.
+  In clock consumers, this cell represents the device ID and clock ID
+  exposed by the PM firmware. The assignments can be found in the header
+  files <dt-bindings/genpd/<soc>.h> (which covers the device IDs) and
+  <dt-bindings/clock/<soc>.h> (which covers the clock IDs), where <soc>
+  is the SoC involved, for example 'k2g'.
+
+Examples:
+--------
+
+pmmc: pmmc {
+	compatible = "ti,k2g-sci";
+
+	k2g_clks: k2g_clks {
+		compatible = "ti,k2g-sci-clk";
+		#clock-cells = <2>;
+	};
+};
+
+uart0: serial@2530c00 {
+	compatible = "ns16550a";
+	clocks = <&k2g_clks K2G_DEV_UART0 0>;
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 3eaac5ed..3ee7c7a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11895,6 +11895,7 @@ F:	include/linux/soc/ti/ti_sci_protocol.h
 F:	Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
 F:	include/dt-bindings/genpd/k2g.h
 F:	drivers/soc/ti/ti_sci_pm_domains.c
+F:	Documentation/devicetree/bindings/clock/ti,sci-clk.txt
 
 THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
-- 
1.9.1


WARNING: multiple messages have this Message-ID (diff)
From: Tero Kristo <t-kristo@ti.com>
To: <linux-clk@vger.kernel.org>, <mturquette@baylibre.com>,
	<sboyd@codeaurora.org>, <ssantosh@kernel.org>
Cc: <nm@ti.com>, <linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>
Subject: [PATCH 1/3] Documentation: dt: Add TI SCI clock driver
Date: Fri, 21 Oct 2016 15:45:59 +0300	[thread overview]
Message-ID: <1477053961-27128-2-git-send-email-t-kristo@ti.com> (raw)
In-Reply-To: <1477053961-27128-1-git-send-email-t-kristo@ti.com>

Add a clock implementation, TI SCI clock, that will hook to the common
clock framework, and allow each clock to be controlled via TI SCI
protocol.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/clock/ti,sci-clk.txt       | 37 ++++++++++++++++++++++
 MAINTAINERS                                        |  1 +
 2 files changed, 38 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/ti,sci-clk.txt

diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt
new file mode 100644
index 0000000..bfc3ca4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt
@@ -0,0 +1,37 @@
+Texas Instruments TI-SCI Clocks
+===============================
+
+All clocks on Texas Instruments' SoCs that contain a System Controller,
+are only controlled by this entity. Communication between a host processor
+running an OS and the System Controller happens through a protocol known
+as TI-SCI[1]. This clock implementation plugs into the common clock
+framework and makes use of the TI-SCI protocol on clock API requests.
+
+[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
+
+Required properties:
+-------------------
+- compatible: Must be "ti,k2g-sci-clk"
+- #clock-cells: Shall be 2.
+  In clock consumers, this cell represents the device ID and clock ID
+  exposed by the PM firmware. The assignments can be found in the header
+  files <dt-bindings/genpd/<soc>.h> (which covers the device IDs) and
+  <dt-bindings/clock/<soc>.h> (which covers the clock IDs), where <soc>
+  is the SoC involved, for example 'k2g'.
+
+Examples:
+--------
+
+pmmc: pmmc {
+	compatible = "ti,k2g-sci";
+
+	k2g_clks: k2g_clks {
+		compatible = "ti,k2g-sci-clk";
+		#clock-cells = <2>;
+	};
+};
+
+uart0: serial@2530c00 {
+	compatible = "ns16550a";
+	clocks = <&k2g_clks K2G_DEV_UART0 0>;
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 3eaac5ed..3ee7c7a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11895,6 +11895,7 @@ F:	include/linux/soc/ti/ti_sci_protocol.h
 F:	Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
 F:	include/dt-bindings/genpd/k2g.h
 F:	drivers/soc/ti/ti_sci_pm_domains.c
+F:	Documentation/devicetree/bindings/clock/ti,sci-clk.txt
 
 THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: t-kristo@ti.com (Tero Kristo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] Documentation: dt: Add TI SCI clock driver
Date: Fri, 21 Oct 2016 15:45:59 +0300	[thread overview]
Message-ID: <1477053961-27128-2-git-send-email-t-kristo@ti.com> (raw)
In-Reply-To: <1477053961-27128-1-git-send-email-t-kristo@ti.com>

Add a clock implementation, TI SCI clock, that will hook to the common
clock framework, and allow each clock to be controlled via TI SCI
protocol.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/clock/ti,sci-clk.txt       | 37 ++++++++++++++++++++++
 MAINTAINERS                                        |  1 +
 2 files changed, 38 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/ti,sci-clk.txt

diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt
new file mode 100644
index 0000000..bfc3ca4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt
@@ -0,0 +1,37 @@
+Texas Instruments TI-SCI Clocks
+===============================
+
+All clocks on Texas Instruments' SoCs that contain a System Controller,
+are only controlled by this entity. Communication between a host processor
+running an OS and the System Controller happens through a protocol known
+as TI-SCI[1]. This clock implementation plugs into the common clock
+framework and makes use of the TI-SCI protocol on clock API requests.
+
+[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
+
+Required properties:
+-------------------
+- compatible: Must be "ti,k2g-sci-clk"
+- #clock-cells: Shall be 2.
+  In clock consumers, this cell represents the device ID and clock ID
+  exposed by the PM firmware. The assignments can be found in the header
+  files <dt-bindings/genpd/<soc>.h> (which covers the device IDs) and
+  <dt-bindings/clock/<soc>.h> (which covers the clock IDs), where <soc>
+  is the SoC involved, for example 'k2g'.
+
+Examples:
+--------
+
+pmmc: pmmc {
+	compatible = "ti,k2g-sci";
+
+	k2g_clks: k2g_clks {
+		compatible = "ti,k2g-sci-clk";
+		#clock-cells = <2>;
+	};
+};
+
+uart0: serial at 2530c00 {
+	compatible = "ns16550a";
+	clocks = <&k2g_clks K2G_DEV_UART0 0>;
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 3eaac5ed..3ee7c7a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11895,6 +11895,7 @@ F:	include/linux/soc/ti/ti_sci_protocol.h
 F:	Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
 F:	include/dt-bindings/genpd/k2g.h
 F:	drivers/soc/ti/ti_sci_pm_domains.c
+F:	Documentation/devicetree/bindings/clock/ti,sci-clk.txt
 
 THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
-- 
1.9.1

  reply	other threads:[~2016-10-21 12:45 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-21 12:45 [PATCH 0/3] clk: keystone: add sci clock support Tero Kristo
2016-10-21 12:45 ` Tero Kristo
2016-10-21 12:45 ` Tero Kristo
2016-10-21 12:45 ` Tero Kristo [this message]
2016-10-21 12:45   ` [PATCH 1/3] Documentation: dt: Add TI SCI clock driver Tero Kristo
2016-10-21 12:45   ` Tero Kristo
2016-10-30 20:41   ` Rob Herring
2016-10-30 20:41     ` Rob Herring
2016-10-31 12:50     ` Tero Kristo
2016-10-31 12:50       ` Tero Kristo
2016-10-31 12:50       ` Tero Kristo
2016-10-31 20:34       ` Nishanth Menon
2016-10-31 20:34         ` Nishanth Menon
2016-10-31 20:34         ` Nishanth Menon
2016-11-18 17:20       ` Rob Herring
2016-11-18 17:20         ` Rob Herring
     [not found]         ` <CAL_JsqLtSs6ifnMdEOsfXpGoWnmXuGAx83+ziB9yU+zurvob+A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-11-21  8:14           ` Tero Kristo
2016-11-21  8:14             ` Tero Kristo
2016-11-21  8:14             ` Tero Kristo
2016-12-02  8:19             ` Tero Kristo
2016-12-02  8:19               ` Tero Kristo
2016-12-02 18:45               ` Rob Herring
2016-12-02 18:45                 ` Rob Herring
2016-12-02 18:58                 ` Stephen Boyd
2016-12-02 18:58                   ` Stephen Boyd
     [not found]                   ` <5f146fb6-ec88-b7ee-ef5b-a5ad32c54a74-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-12-02 21:07                     ` Tero Kristo
2016-12-02 21:07                       ` Tero Kristo
2016-12-02 21:07                       ` Tero Kristo
2016-10-21 12:46 ` [PATCH 2/3] dt-binding: clock: Add k2g clock definitions Tero Kristo
2016-10-21 12:46   ` Tero Kristo
2016-10-21 12:46   ` Tero Kristo
2017-05-16 15:03   ` Tero Kristo
2017-05-16 15:03     ` Tero Kristo
2016-10-21 12:46 ` [PATCH 3/3] clk: keystone: Add sci-clk driver support Tero Kristo
2016-10-21 12:46   ` Tero Kristo
2016-10-21 12:46   ` Tero Kristo
2016-12-08  0:13   ` Stephen Boyd
2016-12-08  0:13     ` Stephen Boyd
2016-12-08 10:45     ` Tero Kristo
2016-12-08 10:45       ` Tero Kristo
2016-12-08 10:45       ` Tero Kristo
2016-12-08 21:10       ` Stephen Boyd
2016-12-08 21:10         ` Stephen Boyd
     [not found]         ` <20161208211044.GI5423-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-12-09  8:05           ` Tero Kristo
2016-12-09  8:05             ` Tero Kristo
2016-12-09  8:05             ` Tero Kristo
2016-12-12 19:38             ` Stephen Boyd
2016-12-12 19:38               ` Stephen Boyd
     [not found]               ` <20161212193800.GL5423-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-12-13  9:01                 ` Tero Kristo
2016-12-13  9:01                   ` Tero Kristo
2016-12-13  9:01                   ` Tero Kristo
  -- strict thread matches above, loose matches on Subject: below --
2016-08-20  0:33 [PATCH 0/3] ARM: K2G: Add support for TI-SCI Clocks Nishanth Menon
2016-08-20  0:33 ` [PATCH 1/3] Documentation: dt: Add TI SCI clock driver Nishanth Menon
2016-08-20  0:33   ` Nishanth Menon
2016-08-20  0:33   ` Nishanth Menon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1477053961-27128-2-git-send-email-t-kristo@ti.com \
    --to=t-kristo@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=nm@ti.com \
    --cc=sboyd@codeaurora.org \
    --cc=ssantosh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.