* [U-Boot] [PATCH] armv8: ls2080a: Update serdes protocol support
@ 2016-10-25 7:46 Priyanka Jain
0 siblings, 0 replies; only message in thread
From: Priyanka Jain @ 2016-10-25 7:46 UTC (permalink / raw)
To: u-boot
Add serdes protocol support for
Serdes1 protocol: 0x39, 0x4B, 0x4C, 0x4D
Serdes2 protocol: 0x47, 0x57
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
---
arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c | 6 +
board/freescale/ls2080aqds/eth.c | 122 +++++++++++++++++++-
2 files changed, 125 insertions(+), 3 deletions(-)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c
index eaa44a7..67d605e 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c
@@ -34,6 +34,11 @@ static struct serdes_config serdes1_cfg_tbl[] = {
{0x33, {PCIE2, PCIE2, PCIE2, PCIE2, QSGMII_D, QSGMII_C, QSGMII_B,
QSGMII_A} },
{0x35, {QSGMII_D, QSGMII_C, QSGMII_B, PCIE2, XFI4, XFI3, XFI2, XFI1 } },
+ {0x39, {SGMII8, SGMII7, SGMII6, PCIE2, SGMII4, SGMII3, SGMII2,
+ PCIE1 } },
+ {0x4B, {PCIE2, PCIE2, PCIE2, PCIE2, XFI4, XFI3, XFI2, XFI1 } },
+ {0x4C, {XFI8, XFI7, XFI6, XFI5, PCIE1, PCIE1, PCIE1, PCIE1 } },
+ {0x4D, {SGMII8, SGMII7, PCIE2, PCIE2, SGMII4, SGMII3, PCIE1, PCIE1 } },
{}
};
static struct serdes_config serdes2_cfg_tbl[] = {
@@ -64,6 +69,7 @@ static struct serdes_config serdes2_cfg_tbl[] = {
SATA2 } },
{0x4A, {SGMII9, SGMII10, SGMII11, SGMII12, PCIE4, PCIE4, SATA1,
SATA2 } },
+ {0x57, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SGMII15, SGMII16 } },
{}
};
diff --git a/board/freescale/ls2080aqds/eth.c b/board/freescale/ls2080aqds/eth.c
index 95ff68b..8618506 100644
--- a/board/freescale/ls2080aqds/eth.c
+++ b/board/freescale/ls2080aqds/eth.c
@@ -64,7 +64,7 @@ static int sgmii_riser_phy_addr[] = {
};
/* Slot2 does not have EMI connections */
-#define EMI_NONE 0xFFFFFFFF
+#define EMI_NONE 0xFF
#define EMI1_SLOT1 0
#define EMI1_SLOT2 1
#define EMI1_SLOT3 2
@@ -470,7 +470,49 @@ static void initialize_dpmac_to_slot(void)
}
break;
+ case 0x39:
+ printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
+ serdes1_prtcl);
+ if (hwconfig_f("xqsgmii", env_hwconfig)) {
+ lane_to_slot_fsm1[0] = EMI1_SLOT3;
+ lane_to_slot_fsm1[1] = EMI1_SLOT3;
+ lane_to_slot_fsm1[2] = EMI1_SLOT3;
+ lane_to_slot_fsm1[3] = EMI_NONE;
+ } else {
+ lane_to_slot_fsm1[0] = EMI_NONE;
+ lane_to_slot_fsm1[1] = EMI_NONE;
+ lane_to_slot_fsm1[2] = EMI_NONE;
+ lane_to_slot_fsm1[3] = EMI_NONE;
+ }
+ lane_to_slot_fsm1[4] = EMI1_SLOT3;
+ lane_to_slot_fsm1[5] = EMI1_SLOT3;
+ lane_to_slot_fsm1[6] = EMI1_SLOT3;
+ lane_to_slot_fsm1[7] = EMI_NONE;
+ break;
+
+ case 0x4D:
+ printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
+ serdes1_prtcl);
+ if (hwconfig_f("xqsgmii", env_hwconfig)) {
+ lane_to_slot_fsm1[0] = EMI1_SLOT3;
+ lane_to_slot_fsm1[1] = EMI1_SLOT3;
+ lane_to_slot_fsm1[2] = EMI_NONE;
+ lane_to_slot_fsm1[3] = EMI_NONE;
+ } else {
+ lane_to_slot_fsm1[0] = EMI_NONE;
+ lane_to_slot_fsm1[1] = EMI_NONE;
+ lane_to_slot_fsm1[2] = EMI_NONE;
+ lane_to_slot_fsm1[3] = EMI_NONE;
+ }
+ lane_to_slot_fsm1[4] = EMI1_SLOT3;
+ lane_to_slot_fsm1[5] = EMI1_SLOT3;
+ lane_to_slot_fsm1[6] = EMI_NONE;
+ lane_to_slot_fsm1[7] = EMI_NONE;
+ break;
+
case 0x2A:
+ case 0x4B:
+ case 0x4C:
printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
serdes1_prtcl);
break;
@@ -505,6 +547,38 @@ static void initialize_dpmac_to_slot(void)
lane_to_slot_fsm2[7] = EMI1_SLOT6;
}
break;
+
+ case 0x47:
+ printf("qds: WRIOP: Supported SerDes2 Protocol 0x%02x\n",
+ serdes2_prtcl);
+ lane_to_slot_fsm2[0] = EMI_NONE;
+ lane_to_slot_fsm2[1] = EMI1_SLOT5;
+ lane_to_slot_fsm2[2] = EMI1_SLOT5;
+ lane_to_slot_fsm2[3] = EMI1_SLOT5;
+
+ if (hwconfig_f("xqsgmii", env_hwconfig)) {
+ lane_to_slot_fsm2[4] = EMI_NONE;
+ lane_to_slot_fsm2[5] = EMI1_SLOT5;
+ lane_to_slot_fsm2[6] = EMI1_SLOT5;
+ lane_to_slot_fsm2[7] = EMI1_SLOT5;
+ }
+ break;
+
+ case 0x57:
+ printf("qds: WRIOP: Supported SerDes2 Protocol 0x%02x\n",
+ serdes2_prtcl);
+ if (hwconfig_f("xqsgmii", env_hwconfig)) {
+ lane_to_slot_fsm2[0] = EMI_NONE;
+ lane_to_slot_fsm2[1] = EMI_NONE;
+ lane_to_slot_fsm2[2] = EMI_NONE;
+ lane_to_slot_fsm2[3] = EMI_NONE;
+ }
+ lane_to_slot_fsm2[4] = EMI_NONE;
+ lane_to_slot_fsm2[5] = EMI_NONE;
+ lane_to_slot_fsm2[6] = EMI1_SLOT5;
+ lane_to_slot_fsm2[7] = EMI1_SLOT5;
+ break;
+
default:
printf(" %s qds: WRIOP: Unsupported SerDes2 Protocol 0x%02x\n",
__func__ , serdes2_prtcl);
@@ -537,8 +611,10 @@ void ls2080a_handle_phy_interface_sgmii(int dpmac_id)
switch (serdes1_prtcl) {
case 0x07:
+ case 0x39:
+ case 0x4D:
+ lane = serdes_get_first_lane(FSL_SRDS_1, SGMII1 + dpmac_id - 1);
- lane = serdes_get_first_lane(FSL_SRDS_1, SGMII1 + dpmac_id);
slot = lane_to_slot_fsm1[lane];
switch (++slot) {
@@ -559,6 +635,26 @@ void ls2080a_handle_phy_interface_sgmii(int dpmac_id)
wriop_set_mdio(dpmac_id, bus);
break;
case 3:
+ if (slot == EMI_NONE)
+ return;
+ if (serdes1_prtcl == 0x39) {
+ wriop_set_phy_address(dpmac_id,
+ riser_phy_addr[dpmac_id - 2]);
+ if (dpmac_id >= 6 && hwconfig_f("xqsgmii",
+ env_hwconfig))
+ wriop_set_phy_address(dpmac_id,
+ riser_phy_addr[dpmac_id - 3]);
+ } else {
+ wriop_set_phy_address(dpmac_id,
+ riser_phy_addr[dpmac_id - 2]);
+ if (dpmac_id >= 7 && hwconfig_f("xqsgmii",
+ env_hwconfig))
+ wriop_set_phy_address(dpmac_id,
+ riser_phy_addr[dpmac_id - 3]);
+ }
+ dpmac_info[dpmac_id].board_mux = EMI1_SLOT3;
+ bus = mii_dev_for_muxval(EMI1_SLOT3);
+ wriop_set_mdio(dpmac_id, bus);
break;
case 4:
break;
@@ -579,6 +675,8 @@ serdes2:
case 0x07:
case 0x08:
case 0x49:
+ case 0x47:
+ case 0x57:
lane = serdes_get_first_lane(FSL_SRDS_2, SGMII9 +
(dpmac_id - 9));
slot = lane_to_slot_fsm2[lane];
@@ -597,7 +695,23 @@ serdes2:
wriop_set_mdio(dpmac_id, bus);
break;
case 5:
- break;
+ if (slot == EMI_NONE)
+ return;
+ if (serdes2_prtcl == 0x47) {
+ wriop_set_phy_address(dpmac_id,
+ riser_phy_addr[dpmac_id - 10]);
+ if (dpmac_id >= 14 && hwconfig_f("xqsgmii",
+ env_hwconfig))
+ wriop_set_phy_address(dpmac_id,
+ riser_phy_addr[dpmac_id - 11]);
+ } else {
+ wriop_set_phy_address(dpmac_id,
+ riser_phy_addr[dpmac_id - 11]);
+ }
+ dpmac_info[dpmac_id].board_mux = EMI1_SLOT5;
+ bus = mii_dev_for_muxval(EMI1_SLOT5);
+ wriop_set_mdio(dpmac_id, bus);
+ break;
case 6:
/* Slot housing a SGMII riser card? */
wriop_set_phy_address(dpmac_id,
@@ -691,6 +805,8 @@ void ls2080a_handle_phy_interface_xsgmii(int i)
switch (serdes1_prtcl) {
case 0x2A:
+ case 0x4B:
+ case 0x4C:
/*
* XFI does not need a PHY to work, but to avoid U-Boot use
* default PHY address which is zero to a MAC when it found
--
1.7.4.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2016-10-25 7:46 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-10-25 7:46 [U-Boot] [PATCH] armv8: ls2080a: Update serdes protocol support Priyanka Jain
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.