All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lukasz Majewski <l.majewski@majess.pl>
To: Thierry Reding <thierry.reding@gmail.com>,
	Stefan Agner <stefan@agner.ch>,
	Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: linux-pwm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Fabio Estevam <fabio.estevam@nxp.com>,
	Fabio Estevam <festevam@gmail.com>,
	Lothar Wassmann <LW@karo-electronics.de>,
	Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>,
	kernel@pengutronix.de, Lukasz Majewski <l.majewski@majess.pl>
Subject: [PATCH v2 05/10] pwm: imx: Move PWMv2 wait for fifo slot code to a separate function
Date: Thu, 27 Oct 2016 08:29:41 +0200	[thread overview]
Message-ID: <1477549785-4972-6-git-send-email-l.majewski@majess.pl> (raw)
In-Reply-To: <1477549785-4972-1-git-send-email-l.majewski@majess.pl>

The code, which waits for fifo slot, has been extracted from
imx_pwm_config_v2 function and moved to new one - imx_pwm_wait_fifo_slot().

This change reduces the overall size of imx_pwm_config_v2() and prepares
it for atomic PWM operation.

Suggested-by: Stefan Agner <stefan@agner.ch>
Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Lukasz Majewski <l.majewski@majess.pl>
---
Changes for v2:
- None
---
 drivers/pwm/pwm-imx.c | 43 +++++++++++++++++++++++++------------------
 1 file changed, 25 insertions(+), 18 deletions(-)

diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
index 8174ae6..f7c7534 100644
--- a/drivers/pwm/pwm-imx.c
+++ b/drivers/pwm/pwm-imx.c
@@ -152,18 +152,36 @@ static void imx_pwm_sw_reset(struct pwm_chip *chip)
 		dev_warn(dev, "software reset timeout\n");
 }
 
+static void imx_pwm_wait_fifo_slot(struct pwm_chip *chip,
+				   struct pwm_device *pwm)
+{
+	struct imx_chip *imx = to_imx_chip(chip);
+	struct device *dev = chip->dev;
+	unsigned int period_ms;
+	int fifoav;
+	u32 sr;
+
+	sr = readl(imx->mmio_base + MX3_PWMSR);
+	fifoav = sr & MX3_PWMSR_FIFOAV_MASK;
+	if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) {
+		period_ms = DIV_ROUND_UP(pwm_get_period(pwm),
+					 NSEC_PER_MSEC);
+		msleep(period_ms);
+
+		sr = readl(imx->mmio_base + MX3_PWMSR);
+		if (fifoav == (sr & MX3_PWMSR_FIFOAV_MASK))
+			dev_warn(dev, "there is no free FIFO slot\n");
+	}
+}
 
 static int imx_pwm_config_v2(struct pwm_chip *chip,
 		struct pwm_device *pwm, int duty_ns, int period_ns)
 {
 	struct imx_chip *imx = to_imx_chip(chip);
-	struct device *dev = chip->dev;
 	unsigned long long c;
 	unsigned long period_cycles, duty_cycles, prescale;
-	unsigned int period_ms;
 	bool enable = pwm_is_enabled(pwm);
-	int fifoav;
-	u32 cr, sr;
+	u32 cr;
 
 	/*
 	 * i.MX PWMv2 has a 4-word sample FIFO.
@@ -172,21 +190,10 @@ static int imx_pwm_config_v2(struct pwm_chip *chip,
 	 * wait for a full PWM cycle to get a relinquished FIFO slot
 	 * when the controller is enabled and the FIFO is fully loaded.
 	 */
-	if (enable) {
-		sr = readl(imx->mmio_base + MX3_PWMSR);
-		fifoav = sr & MX3_PWMSR_FIFOAV_MASK;
-		if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) {
-			period_ms = DIV_ROUND_UP(pwm_get_period(pwm),
-						 NSEC_PER_MSEC);
-			msleep(period_ms);
-
-			sr = readl(imx->mmio_base + MX3_PWMSR);
-			if (fifoav == (sr & MX3_PWMSR_FIFOAV_MASK))
-				dev_warn(dev, "there is no free FIFO slot\n");
-		}
-	} else {
+	if (enable)
+		imx_pwm_wait_fifo_slot(chip, pwm);
+	else
 		imx_pwm_sw_reset(chip);
-	}
 
 	c = clk_get_rate(imx->clk_per);
 	c = c * period_ns;
-- 
2.1.4

  parent reply	other threads:[~2016-10-27  6:46 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-27  6:29 [PATCH v2 00/10] pwm: imx: Provide atomic operation for IMX PWM driver Lukasz Majewski
2016-10-27  6:29 ` [PATCH v2 01/10] pwm: print error messages with pr_err() instead of pr_debug() Lukasz Majewski
2016-10-27  6:29 ` [PATCH v2 02/10] pwm: imx: Add separate set of pwm ops for PWMv1 and PWMv2 Lukasz Majewski
2016-10-27  6:29 ` [PATCH v2 03/10] pwm: imx: Rewrite imx_pwm_*_v1 code to facilitate switch to atomic pwm operation Lukasz Majewski
2016-10-27  7:40   ` Boris Brezillon
2016-10-27  8:22     ` Lukasz Majewski
2016-10-31  5:59     ` Sascha Hauer
2016-10-31  5:59       ` Sascha Hauer
2016-10-31  8:06       ` Lukasz Majewski
2016-10-31  9:24         ` Sascha Hauer
2016-10-31  9:29       ` Sascha Hauer
2016-10-31 11:58         ` Lukasz Majewski
2016-11-01  5:57         ` Lukasz Majewski
2016-11-01  7:17           ` Sascha Hauer
2016-11-01  8:20             ` Lukasz Majewski
2016-11-01  8:59         ` Sascha Hauer
2016-11-02  7:18       ` Lothar Waßmann
2016-11-02  7:36         ` Sascha Hauer
2016-11-02  7:56           ` Lothar Waßmann
2016-11-02  8:06             ` Sascha Hauer
2016-11-02  8:51               ` Lothar Waßmann
2016-11-02  9:34                 ` Philipp Zabel
2016-10-27  6:29 ` [PATCH v2 04/10] pwm: imx: Move PWMv2 software reset code to a separate function Lukasz Majewski
2016-11-03  9:34   ` Philipp Zabel
2016-10-27  6:29 ` Lukasz Majewski [this message]
2016-10-27  6:29 ` [PATCH v2 06/10] pwm: imx: Provide atomic PWM support for i.MX PWMv2 Lukasz Majewski
2016-10-27  6:29 ` [PATCH v2 07/10] pwm: imx: Remove redundant i.MX PWMv2 code Lukasz Majewski
2016-10-27  6:29 ` [PATCH v2 08/10] pwm: core: make the PWM_POLARITY flag in DTB optional Lukasz Majewski
2016-10-27  6:29 ` [PATCH v2 10/10] pwm: imx: Add polarity inversion support to i.MX's PWMv2 Lukasz Majewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1477549785-4972-6-git-send-email-l.majewski@majess.pl \
    --to=l.majewski@majess.pl \
    --cc=LW@karo-electronics.de \
    --cc=bhuvanchandra.dv@toradex.com \
    --cc=boris.brezillon@free-electrons.com \
    --cc=fabio.estevam@nxp.com \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=stefan@agner.ch \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.