All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lukasz Majewski <l.majewski@majess.pl>
To: Thierry Reding <thierry.reding@gmail.com>,
	Stefan Agner <stefan@agner.ch>,
	Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: linux-pwm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Fabio Estevam <fabio.estevam@nxp.com>,
	Fabio Estevam <festevam@gmail.com>,
	Lothar Wassmann <LW@karo-electronics.de>,
	Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>,
	kernel@pengutronix.de, Lukasz Majewski <l.majewski@majess.pl>
Subject: [PATCH v2 07/10] pwm: imx: Remove redundant i.MX PWMv2 code
Date: Thu, 27 Oct 2016 08:29:43 +0200	[thread overview]
Message-ID: <1477549785-4972-8-git-send-email-l.majewski@majess.pl> (raw)
In-Reply-To: <1477549785-4972-1-git-send-email-l.majewski@majess.pl>

The code providing functionality surpassed by the atomic PWM is not needed
anymore and hence can be removed.

Suggested-by: Stefan Agner <stefan@agner.ch>
Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Lukasz Majewski <l.majewski@majess.pl>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
Changes for v2:
- None
---
 drivers/pwm/pwm-imx.c | 127 --------------------------------------------------
 1 file changed, 127 deletions(-)

diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
index 6b7d2f1..0132439a 100644
--- a/drivers/pwm/pwm-imx.c
+++ b/drivers/pwm/pwm-imx.c
@@ -54,10 +54,6 @@ struct imx_chip {
 	void __iomem	*mmio_base;
 
 	struct pwm_chip	chip;
-
-	int (*config)(struct pwm_chip *chip,
-		struct pwm_device *pwm, int duty_ns, int period_ns);
-	void (*set_enable)(struct pwm_chip *chip, bool enable);
 };
 
 #define to_imx_chip(chip)	container_of(chip, struct imx_chip, chip)
@@ -249,118 +245,6 @@ static int imx_pwm_apply_v2(struct pwm_chip *chip, struct pwm_device *pwm,
 	return 0;
 }
 
-static int imx_pwm_config_v2(struct pwm_chip *chip,
-		struct pwm_device *pwm, int duty_ns, int period_ns)
-{
-	struct imx_chip *imx = to_imx_chip(chip);
-	unsigned long long c;
-	unsigned long period_cycles, duty_cycles, prescale;
-	bool enable = pwm_is_enabled(pwm);
-	u32 cr;
-
-	/*
-	 * i.MX PWMv2 has a 4-word sample FIFO.
-	 * In order to avoid FIFO overflow issue, we do software reset
-	 * to clear all sample FIFO if the controller is disabled or
-	 * wait for a full PWM cycle to get a relinquished FIFO slot
-	 * when the controller is enabled and the FIFO is fully loaded.
-	 */
-	if (enable)
-		imx_pwm_wait_fifo_slot(chip, pwm);
-	else
-		imx_pwm_sw_reset(chip);
-
-	c = clk_get_rate(imx->clk_per);
-	c = c * period_ns;
-	do_div(c, 1000000000);
-	period_cycles = c;
-
-	prescale = period_cycles / 0x10000 + 1;
-
-	period_cycles /= prescale;
-	c = (unsigned long long)period_cycles * duty_ns;
-	do_div(c, period_ns);
-	duty_cycles = c;
-
-	/*
-	 * according to imx pwm RM, the real period value should be
-	 * PERIOD value in PWMPR plus 2.
-	 */
-	if (period_cycles > 2)
-		period_cycles -= 2;
-	else
-		period_cycles = 0;
-
-	writel(duty_cycles, imx->mmio_base + MX3_PWMSAR);
-	writel(period_cycles, imx->mmio_base + MX3_PWMPR);
-
-	cr = MX3_PWMCR_PRESCALER(prescale) |
-		MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
-		MX3_PWMCR_DBGEN | MX3_PWMCR_CLKSRC_IPG_HIGH;
-
-	if (enable)
-		cr |= MX3_PWMCR_EN;
-
-	writel(cr, imx->mmio_base + MX3_PWMCR);
-
-	return 0;
-}
-
-static void imx_pwm_set_enable_v2(struct pwm_chip *chip, bool enable)
-{
-	struct imx_chip *imx = to_imx_chip(chip);
-	u32 val;
-
-	val = readl(imx->mmio_base + MX3_PWMCR);
-
-	if (enable)
-		val |= MX3_PWMCR_EN;
-	else
-		val &= ~MX3_PWMCR_EN;
-
-	writel(val, imx->mmio_base + MX3_PWMCR);
-}
-
-static int imx_pwm_config(struct pwm_chip *chip,
-		struct pwm_device *pwm, int duty_ns, int period_ns)
-{
-	struct imx_chip *imx = to_imx_chip(chip);
-	int ret;
-
-	ret = clk_prepare_enable(imx->clk_ipg);
-	if (ret)
-		return ret;
-
-	ret = imx->config(chip, pwm, duty_ns, period_ns);
-
-	clk_disable_unprepare(imx->clk_ipg);
-
-	return ret;
-}
-
-static int imx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
-	struct imx_chip *imx = to_imx_chip(chip);
-	int ret;
-
-	ret = clk_prepare_enable(imx->clk_per);
-	if (ret)
-		return ret;
-
-	imx->set_enable(chip, true);
-
-	return 0;
-}
-
-static void imx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
-	struct imx_chip *imx = to_imx_chip(chip);
-
-	imx->set_enable(chip, false);
-
-	clk_disable_unprepare(imx->clk_per);
-}
-
 static struct pwm_ops imx_pwm_ops_v1 = {
 	.enable = imx_pwm_enable_v1,
 	.disable = imx_pwm_disable_v1,
@@ -369,17 +253,11 @@ static struct pwm_ops imx_pwm_ops_v1 = {
 };
 
 static struct pwm_ops imx_pwm_ops_v2 = {
-	.enable = imx_pwm_enable,
-	.disable = imx_pwm_disable,
-	.config = imx_pwm_config,
 	.apply = imx_pwm_apply_v2,
 	.owner = THIS_MODULE,
 };
 
 struct imx_pwm_data {
-	int (*config)(struct pwm_chip *chip,
-		struct pwm_device *pwm, int duty_ns, int period_ns);
-	void (*set_enable)(struct pwm_chip *chip, bool enable);
 	struct pwm_ops *pwm_ops;
 };
 
@@ -388,8 +266,6 @@ static struct imx_pwm_data imx_pwm_data_v1 = {
 };
 
 static struct imx_pwm_data imx_pwm_data_v2 = {
-	.config = imx_pwm_config_v2,
-	.set_enable = imx_pwm_set_enable_v2,
 	.pwm_ops = &imx_pwm_ops_v2,
 };
 
@@ -443,9 +319,6 @@ static int imx_pwm_probe(struct platform_device *pdev)
 	if (IS_ERR(imx->mmio_base))
 		return PTR_ERR(imx->mmio_base);
 
-	imx->config = data->config;
-	imx->set_enable = data->set_enable;
-
 	ret = pwmchip_add(&imx->chip);
 	if (ret < 0)
 		return ret;
-- 
2.1.4

  parent reply	other threads:[~2016-10-27  6:41 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-27  6:29 [PATCH v2 00/10] pwm: imx: Provide atomic operation for IMX PWM driver Lukasz Majewski
2016-10-27  6:29 ` [PATCH v2 01/10] pwm: print error messages with pr_err() instead of pr_debug() Lukasz Majewski
2016-10-27  6:29 ` [PATCH v2 02/10] pwm: imx: Add separate set of pwm ops for PWMv1 and PWMv2 Lukasz Majewski
2016-10-27  6:29 ` [PATCH v2 03/10] pwm: imx: Rewrite imx_pwm_*_v1 code to facilitate switch to atomic pwm operation Lukasz Majewski
2016-10-27  7:40   ` Boris Brezillon
2016-10-27  8:22     ` Lukasz Majewski
2016-10-31  5:59     ` Sascha Hauer
2016-10-31  5:59       ` Sascha Hauer
2016-10-31  8:06       ` Lukasz Majewski
2016-10-31  9:24         ` Sascha Hauer
2016-10-31  9:29       ` Sascha Hauer
2016-10-31 11:58         ` Lukasz Majewski
2016-11-01  5:57         ` Lukasz Majewski
2016-11-01  7:17           ` Sascha Hauer
2016-11-01  8:20             ` Lukasz Majewski
2016-11-01  8:59         ` Sascha Hauer
2016-11-02  7:18       ` Lothar Waßmann
2016-11-02  7:36         ` Sascha Hauer
2016-11-02  7:56           ` Lothar Waßmann
2016-11-02  8:06             ` Sascha Hauer
2016-11-02  8:51               ` Lothar Waßmann
2016-11-02  9:34                 ` Philipp Zabel
2016-10-27  6:29 ` [PATCH v2 04/10] pwm: imx: Move PWMv2 software reset code to a separate function Lukasz Majewski
2016-11-03  9:34   ` Philipp Zabel
2016-10-27  6:29 ` [PATCH v2 05/10] pwm: imx: Move PWMv2 wait for fifo slot " Lukasz Majewski
2016-10-27  6:29 ` [PATCH v2 06/10] pwm: imx: Provide atomic PWM support for i.MX PWMv2 Lukasz Majewski
2016-10-27  6:29 ` Lukasz Majewski [this message]
2016-10-27  6:29 ` [PATCH v2 08/10] pwm: core: make the PWM_POLARITY flag in DTB optional Lukasz Majewski
2016-10-27  6:29 ` [PATCH v2 10/10] pwm: imx: Add polarity inversion support to i.MX's PWMv2 Lukasz Majewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1477549785-4972-8-git-send-email-l.majewski@majess.pl \
    --to=l.majewski@majess.pl \
    --cc=LW@karo-electronics.de \
    --cc=bhuvanchandra.dv@toradex.com \
    --cc=boris.brezillon@free-electrons.com \
    --cc=fabio.estevam@nxp.com \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=stefan@agner.ch \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.