* [PATCH 0/3] scsi_dh: switch to scsi_execute_req_flags()
@ 2016-10-31 17:59 Hannes Reinecke
2016-10-31 17:59 ` [PATCH 1/3] scsi_dh_rdac: " Hannes Reinecke
` (3 more replies)
0 siblings, 4 replies; 8+ messages in thread
From: Hannes Reinecke @ 2016-10-31 17:59 UTC (permalink / raw)
To: Martin K. Petersen
Cc: Christoph Hellwig, James Bottomley, linux-scsi, Hannes Reinecke
Hi all,
here's a patchset to switch to scsi_execute_req_flags() for
all SCSI device handlers. Originally we would be using
blk_execute_rq_nowait to allow the 'activate' function
to run asynchronously.
However, as we're now calling the 'activate' function
synchronously there's no point in using the blk_execute_rq()
interface and we should be using scsi_execute_req_flags()
instead.
As usual, comments and reviews are welcome.
Hannes Reinecke (3):
scsi_dh_rdac: switch to scsi_execute_req_flags()
scsi_dh_emc: switch to scsi_execute_req_flags()
scsi_dh_hp_sw: switch to scsi_execute_req_flags()
drivers/scsi/device_handler/scsi_dh_emc.c | 245 ++++++----------------------
drivers/scsi/device_handler/scsi_dh_hp_sw.c | 218 +++++++------------------
drivers/scsi/device_handler/scsi_dh_rdac.c | 160 +++++-------------
3 files changed, 160 insertions(+), 463 deletions(-)
--
2.6.6
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/3] scsi_dh_rdac: switch to scsi_execute_req_flags()
2016-10-31 17:59 [PATCH 0/3] scsi_dh: switch to scsi_execute_req_flags() Hannes Reinecke
@ 2016-10-31 17:59 ` Hannes Reinecke
2016-11-01 14:47 ` Christoph Hellwig
2016-10-31 17:59 ` [PATCH 2/3] scsi_dh_emc: " Hannes Reinecke
` (2 subsequent siblings)
3 siblings, 1 reply; 8+ messages in thread
From: Hannes Reinecke @ 2016-10-31 17:59 UTC (permalink / raw)
To: Martin K. Petersen
Cc: Christoph Hellwig, James Bottomley, linux-scsi, Hannes Reinecke,
Hannes Reinecke
Switch to using scsi_execute_req_flags() instead of using the
block primitives.
Signed-off-by: Hannes Reinecke <hare@suse.com>
---
drivers/scsi/device_handler/scsi_dh_rdac.c | 160 ++++++++---------------------
1 file changed, 45 insertions(+), 115 deletions(-)
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index 06fbd0b..18ca2e9 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -205,7 +205,6 @@ struct rdac_dh_data {
#define RDAC_NON_PREFERRED 1
char preferred;
- unsigned char sense[SCSI_SENSE_BUFFERSIZE];
union {
struct c2_inquiry c2;
struct c4_inquiry c4;
@@ -262,40 +261,12 @@ do { \
sdev_printk(KERN_INFO, sdev, RDAC_NAME ": " f "\n", ## arg); \
} while (0);
-static struct request *get_rdac_req(struct scsi_device *sdev,
- void *buffer, unsigned buflen, int rw)
+static unsigned int rdac_failover_get(struct rdac_controller *ctlr,
+ struct list_head *list,
+ unsigned char *cdb)
{
- struct request *rq;
- struct request_queue *q = sdev->request_queue;
-
- rq = blk_get_request(q, rw, GFP_NOIO);
-
- if (IS_ERR(rq)) {
- sdev_printk(KERN_INFO, sdev,
- "get_rdac_req: blk_get_request failed.\n");
- return NULL;
- }
- blk_rq_set_block_pc(rq);
-
- if (buflen && blk_rq_map_kern(q, rq, buffer, buflen, GFP_NOIO)) {
- blk_put_request(rq);
- sdev_printk(KERN_INFO, sdev,
- "get_rdac_req: blk_rq_map_kern failed.\n");
- return NULL;
- }
-
- rq->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
- REQ_FAILFAST_DRIVER;
- rq->retries = RDAC_RETRIES;
- rq->timeout = RDAC_TIMEOUT;
-
- return rq;
-}
-
-static struct request *rdac_failover_get(struct scsi_device *sdev,
- struct rdac_dh_data *h, struct list_head *list)
-{
- struct request *rq;
+ struct scsi_device *sdev = ctlr->ms_sdev;
+ struct rdac_dh_data *h = sdev->handler_data;
struct rdac_mode_common *common;
unsigned data_size;
struct rdac_queue_data *qdata;
@@ -332,27 +303,17 @@ static struct request *rdac_failover_get(struct scsi_device *sdev,
lun_table[qdata->h->lun] = 0x81;
}
- /* get request for block layer packet command */
- rq = get_rdac_req(sdev, &h->ctlr->mode_select, data_size, WRITE);
- if (!rq)
- return NULL;
-
/* Prepare the command. */
if (h->ctlr->use_ms10) {
- rq->cmd[0] = MODE_SELECT_10;
- rq->cmd[7] = data_size >> 8;
- rq->cmd[8] = data_size & 0xff;
+ cdb[0] = MODE_SELECT_10;
+ cdb[7] = data_size >> 8;
+ cdb[8] = data_size & 0xff;
} else {
- rq->cmd[0] = MODE_SELECT;
- rq->cmd[4] = data_size;
+ cdb[0] = MODE_SELECT;
+ cdb[4] = data_size;
}
- rq->cmd_len = COMMAND_SIZE(rq->cmd[0]);
-
- rq->sense = h->sense;
- memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
- rq->sense_len = 0;
- return rq;
+ return data_size;
}
static void release_controller(struct kref *kref)
@@ -400,45 +361,14 @@ static struct rdac_controller *get_controller(int index, char *array_name,
return ctlr;
}
-static int submit_inquiry(struct scsi_device *sdev, int page_code,
- unsigned int len, struct rdac_dh_data *h)
-{
- struct request *rq;
- struct request_queue *q = sdev->request_queue;
- int err = SCSI_DH_RES_TEMP_UNAVAIL;
-
- rq = get_rdac_req(sdev, &h->inq, len, READ);
- if (!rq)
- goto done;
-
- /* Prepare the command. */
- rq->cmd[0] = INQUIRY;
- rq->cmd[1] = 1;
- rq->cmd[2] = page_code;
- rq->cmd[4] = len;
- rq->cmd_len = COMMAND_SIZE(INQUIRY);
-
- rq->sense = h->sense;
- memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
- rq->sense_len = 0;
-
- err = blk_execute_rq(q, NULL, rq, 1);
- if (err == -EIO)
- err = SCSI_DH_IO;
-
- blk_put_request(rq);
-done:
- return err;
-}
-
static int get_lun_info(struct scsi_device *sdev, struct rdac_dh_data *h,
char *array_name, u8 *array_id)
{
- int err, i;
+ int err = SCSI_DH_IO, i;
struct c8_inquiry *inqp;
- err = submit_inquiry(sdev, 0xC8, sizeof(struct c8_inquiry), h);
- if (err == SCSI_DH_OK) {
+ if (!scsi_get_vpd_page(sdev, 0xC8, (unsigned char *)h,
+ sizeof(struct c8_inquiry))) {
inqp = &h->inq.c8;
if (inqp->page_code != 0xc8)
return SCSI_DH_NOSYS;
@@ -453,19 +383,20 @@ static int get_lun_info(struct scsi_device *sdev, struct rdac_dh_data *h,
*(array_name+ARRAY_LABEL_LEN-1) = '\0';
memset(array_id, 0, UNIQUE_ID_LEN);
memcpy(array_id, inqp->array_unique_id, inqp->array_uniq_id_len);
+ err = SCSI_DH_OK;
}
return err;
}
static int check_ownership(struct scsi_device *sdev, struct rdac_dh_data *h)
{
- int err, access_state;
+ int err = SCSI_DH_IO, access_state;
struct rdac_dh_data *tmp;
struct c9_inquiry *inqp;
h->state = RDAC_STATE_ACTIVE;
- err = submit_inquiry(sdev, 0xC9, sizeof(struct c9_inquiry), h);
- if (err == SCSI_DH_OK) {
+ if (!scsi_get_vpd_page(sdev, 0xC9, (unsigned char *)h,
+ sizeof(struct c9_inquiry))) {
inqp = &h->inq.c9;
/* detect the operating mode */
if ((inqp->avte_cvp >> 5) & 0x1)
@@ -501,6 +432,7 @@ static int check_ownership(struct scsi_device *sdev, struct rdac_dh_data *h)
tmp->sdev->access_state = access_state;
}
rcu_read_unlock();
+ err = SCSI_DH_OK;
}
return err;
@@ -509,11 +441,11 @@ static int check_ownership(struct scsi_device *sdev, struct rdac_dh_data *h)
static int initialize_controller(struct scsi_device *sdev,
struct rdac_dh_data *h, char *array_name, u8 *array_id)
{
- int err, index;
+ int err = SCSI_DH_IO, index;
struct c4_inquiry *inqp;
- err = submit_inquiry(sdev, 0xC4, sizeof(struct c4_inquiry), h);
- if (err == SCSI_DH_OK) {
+ if (!scsi_get_vpd_page(sdev, 0xC4, (unsigned char *)h,
+ sizeof(struct c4_inquiry))) {
inqp = &h->inq.c4;
/* get the controller index */
if (inqp->slot_id[1] == 0x31)
@@ -530,17 +462,18 @@ static int initialize_controller(struct scsi_device *sdev,
h->sdev = sdev;
}
spin_unlock(&list_lock);
+ err = SCSI_DH_OK;
}
return err;
}
static int set_mode_select(struct scsi_device *sdev, struct rdac_dh_data *h)
{
- int err;
+ int err = SCSI_DH_IO;
struct c2_inquiry *inqp;
- err = submit_inquiry(sdev, 0xC2, sizeof(struct c2_inquiry), h);
- if (err == SCSI_DH_OK) {
+ if (!scsi_get_vpd_page(sdev, 0xC2, (unsigned char *)h,
+ sizeof(struct c2_inquiry))) {
inqp = &h->inq.c2;
/*
* If more than MODE6_MAX_LUN luns are supported, use
@@ -550,36 +483,35 @@ static int set_mode_select(struct scsi_device *sdev, struct rdac_dh_data *h)
h->ctlr->use_ms10 = 1;
else
h->ctlr->use_ms10 = 0;
+ err = SCSI_DH_OK;
}
return err;
}
static int mode_select_handle_sense(struct scsi_device *sdev,
- unsigned char *sensebuf)
+ struct scsi_sense_hdr *sense_hdr)
{
- struct scsi_sense_hdr sense_hdr;
- int err = SCSI_DH_IO, ret;
+ int err = SCSI_DH_IO;
struct rdac_dh_data *h = sdev->handler_data;
- ret = scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE, &sense_hdr);
- if (!ret)
+ if (!scsi_sense_valid(sense_hdr))
goto done;
- switch (sense_hdr.sense_key) {
+ switch (sense_hdr->sense_key) {
case NO_SENSE:
case ABORTED_COMMAND:
case UNIT_ATTENTION:
err = SCSI_DH_RETRY;
break;
case NOT_READY:
- if (sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x01)
+ if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x01)
/* LUN Not Ready and is in the Process of Becoming
* Ready
*/
err = SCSI_DH_RETRY;
break;
case ILLEGAL_REQUEST:
- if (sense_hdr.asc == 0x91 && sense_hdr.ascq == 0x36)
+ if (sense_hdr->asc == 0x91 && sense_hdr->ascq == 0x36)
/*
* Command Lock contention
*/
@@ -592,7 +524,7 @@ static int mode_select_handle_sense(struct scsi_device *sdev,
RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, "
"MODE_SELECT returned with sense %02x/%02x/%02x",
(char *) h->ctlr->array_name, h->ctlr->index,
- sense_hdr.sense_key, sense_hdr.asc, sense_hdr.ascq);
+ sense_hdr->sense_key, sense_hdr->asc, sense_hdr->ascq);
done:
return err;
@@ -602,13 +534,14 @@ static void send_mode_select(struct work_struct *work)
{
struct rdac_controller *ctlr =
container_of(work, struct rdac_controller, ms_work);
- struct request *rq;
struct scsi_device *sdev = ctlr->ms_sdev;
struct rdac_dh_data *h = sdev->handler_data;
- struct request_queue *q = sdev->request_queue;
- int err, retry_cnt = RDAC_RETRY_COUNT;
+ int err = SCSI_DH_OK, retry_cnt = RDAC_RETRY_COUNT;
struct rdac_queue_data *tmp, *qdata;
LIST_HEAD(list);
+ unsigned char cdb[COMMAND_SIZE(MODE_SELECT_10)];
+ struct scsi_sense_hdr sshdr;
+ unsigned int data_size;
spin_lock(&ctlr->ms_lock);
list_splice_init(&ctlr->ms_head, &list);
@@ -616,21 +549,19 @@ static void send_mode_select(struct work_struct *work)
ctlr->ms_sdev = NULL;
spin_unlock(&ctlr->ms_lock);
-retry:
- err = SCSI_DH_RES_TEMP_UNAVAIL;
- rq = rdac_failover_get(sdev, h, &list);
- if (!rq)
- goto done;
+ retry:
+ data_size = rdac_failover_get(ctlr, &list, cdb);
RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, "
"%s MODE_SELECT command",
(char *) h->ctlr->array_name, h->ctlr->index,
(retry_cnt == RDAC_RETRY_COUNT) ? "queueing" : "retrying");
- err = blk_execute_rq(q, NULL, rq, 1);
- blk_put_request(rq);
- if (err != SCSI_DH_OK) {
- err = mode_select_handle_sense(sdev, h->sense);
+ if (scsi_execute_req_flags(sdev, cdb, DMA_TO_DEVICE,
+ &h->ctlr->mode_select, data_size, &sshdr,
+ RDAC_TIMEOUT * HZ,
+ RDAC_RETRIES, NULL, REQ_FAILFAST_MASK)) {
+ err = mode_select_handle_sense(sdev, &sshdr);
if (err == SCSI_DH_RETRY && retry_cnt--)
goto retry;
if (err == SCSI_DH_IMM_RETRY)
@@ -643,7 +574,6 @@ static void send_mode_select(struct work_struct *work)
(char *) h->ctlr->array_name, h->ctlr->index);
}
-done:
list_for_each_entry_safe(qdata, tmp, &list, entry) {
list_del(&qdata->entry);
if (err == SCSI_DH_OK)
--
2.6.6
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/3] scsi_dh_emc: switch to scsi_execute_req_flags()
2016-10-31 17:59 [PATCH 0/3] scsi_dh: switch to scsi_execute_req_flags() Hannes Reinecke
2016-10-31 17:59 ` [PATCH 1/3] scsi_dh_rdac: " Hannes Reinecke
@ 2016-10-31 17:59 ` Hannes Reinecke
2016-10-31 17:59 ` [PATCH 3/3] scsi_dh_hp_sw: " Hannes Reinecke
2016-11-01 14:41 ` [PATCH 0/3] scsi_dh: " Christoph Hellwig
3 siblings, 0 replies; 8+ messages in thread
From: Hannes Reinecke @ 2016-10-31 17:59 UTC (permalink / raw)
To: Martin K. Petersen
Cc: Christoph Hellwig, James Bottomley, linux-scsi, Hannes Reinecke,
Hannes Reinecke
Switch to using scsi_execute_req_flags() instead of using the
block primitives.
Signed-off-by: Hannes Reinecke <hare@suse.com>
---
drivers/scsi/device_handler/scsi_dh_emc.c | 245 +++++++-----------------------
1 file changed, 54 insertions(+), 191 deletions(-)
diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c
index 375d818..a7da109 100644
--- a/drivers/scsi/device_handler/scsi_dh_emc.c
+++ b/drivers/scsi/device_handler/scsi_dh_emc.c
@@ -88,12 +88,6 @@ struct clariion_dh_data {
*/
unsigned char buffer[CLARIION_BUFFER_SIZE];
/*
- * SCSI sense buffer for commands -- assumes serial issuance
- * and completion sequence of all commands for same multipath.
- */
- unsigned char sense[SCSI_SENSE_BUFFERSIZE];
- unsigned int senselen;
- /*
* LUN state
*/
int lun_state;
@@ -116,44 +110,38 @@ struct clariion_dh_data {
/*
* Parse MODE_SELECT cmd reply.
*/
-static int trespass_endio(struct scsi_device *sdev, char *sense)
+static int trespass_endio(struct scsi_device *sdev,
+ struct scsi_sense_hdr *sshdr)
{
int err = SCSI_DH_IO;
- struct scsi_sense_hdr sshdr;
-
- if (!scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr)) {
- sdev_printk(KERN_ERR, sdev, "%s: Found valid sense data 0x%2x, "
- "0x%2x, 0x%2x while sending CLARiiON trespass "
- "command.\n", CLARIION_NAME, sshdr.sense_key,
- sshdr.asc, sshdr.ascq);
- if ((sshdr.sense_key == 0x05) && (sshdr.asc == 0x04) &&
- (sshdr.ascq == 0x00)) {
- /*
- * Array based copy in progress -- do not send
- * mode_select or copy will be aborted mid-stream.
- */
- sdev_printk(KERN_INFO, sdev, "%s: Array Based Copy in "
- "progress while sending CLARiiON trespass "
- "command.\n", CLARIION_NAME);
- err = SCSI_DH_DEV_TEMP_BUSY;
- } else if ((sshdr.sense_key == 0x02) && (sshdr.asc == 0x04) &&
- (sshdr.ascq == 0x03)) {
- /*
- * LUN Not Ready - Manual Intervention Required
- * indicates in-progress ucode upgrade (NDU).
- */
- sdev_printk(KERN_INFO, sdev, "%s: Detected in-progress "
- "ucode upgrade NDU operation while sending "
- "CLARiiON trespass command.\n", CLARIION_NAME);
- err = SCSI_DH_DEV_TEMP_BUSY;
- } else
- err = SCSI_DH_DEV_FAILED;
- } else {
- sdev_printk(KERN_INFO, sdev,
- "%s: failed to send MODE SELECT, no sense available\n",
- CLARIION_NAME);
- }
+ sdev_printk(KERN_ERR, sdev, "%s: Found valid sense data 0x%2x, "
+ "0x%2x, 0x%2x while sending CLARiiON trespass "
+ "command.\n", CLARIION_NAME, sshdr->sense_key,
+ sshdr->asc, sshdr->ascq);
+
+ if ((sshdr->sense_key == 0x05) && (sshdr->asc == 0x04) &&
+ (sshdr->ascq == 0x00)) {
+ /*
+ * Array based copy in progress -- do not send
+ * mode_select or copy will be aborted mid-stream.
+ */
+ sdev_printk(KERN_INFO, sdev, "%s: Array Based Copy in "
+ "progress while sending CLARiiON trespass "
+ "command.\n", CLARIION_NAME);
+ err = SCSI_DH_DEV_TEMP_BUSY;
+ } else if ((sshdr->sense_key == 0x02) && (sshdr->asc == 0x04) &&
+ (sshdr->ascq == 0x03)) {
+ /*
+ * LUN Not Ready - Manual Intervention Required
+ * indicates in-progress ucode upgrade (NDU).
+ */
+ sdev_printk(KERN_INFO, sdev, "%s: Detected in-progress "
+ "ucode upgrade NDU operation while sending "
+ "CLARiiON trespass command.\n", CLARIION_NAME);
+ err = SCSI_DH_DEV_TEMP_BUSY;
+ } else
+ err = SCSI_DH_DEV_FAILED;
return err;
}
@@ -257,103 +245,13 @@ static char * parse_sp_model(struct scsi_device *sdev, unsigned char *buffer)
return sp_model;
}
-/*
- * Get block request for REQ_BLOCK_PC command issued to path. Currently
- * limited to MODE_SELECT (trespass) and INQUIRY (VPD page 0xC0) commands.
- *
- * Uses data and sense buffers in hardware handler context structure and
- * assumes serial servicing of commands, both issuance and completion.
- */
-static struct request *get_req(struct scsi_device *sdev, int cmd,
- unsigned char *buffer)
-{
- struct request *rq;
- int len = 0;
-
- rq = blk_get_request(sdev->request_queue,
- (cmd != INQUIRY) ? WRITE : READ, GFP_NOIO);
- if (IS_ERR(rq)) {
- sdev_printk(KERN_INFO, sdev, "get_req: blk_get_request failed");
- return NULL;
- }
-
- blk_rq_set_block_pc(rq);
- rq->cmd_len = COMMAND_SIZE(cmd);
- rq->cmd[0] = cmd;
-
- switch (cmd) {
- case MODE_SELECT:
- len = sizeof(short_trespass);
- rq->cmd[1] = 0x10;
- rq->cmd[4] = len;
- break;
- case MODE_SELECT_10:
- len = sizeof(long_trespass);
- rq->cmd[1] = 0x10;
- rq->cmd[8] = len;
- break;
- case INQUIRY:
- len = CLARIION_BUFFER_SIZE;
- rq->cmd[4] = len;
- memset(buffer, 0, len);
- break;
- default:
- BUG_ON(1);
- break;
- }
-
- rq->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
- REQ_FAILFAST_DRIVER;
- rq->timeout = CLARIION_TIMEOUT;
- rq->retries = CLARIION_RETRIES;
-
- if (blk_rq_map_kern(rq->q, rq, buffer, len, GFP_NOIO)) {
- blk_put_request(rq);
- return NULL;
- }
-
- return rq;
-}
-
-static int send_inquiry_cmd(struct scsi_device *sdev, int page,
- struct clariion_dh_data *csdev)
-{
- struct request *rq = get_req(sdev, INQUIRY, csdev->buffer);
- int err;
-
- if (!rq)
- return SCSI_DH_RES_TEMP_UNAVAIL;
-
- rq->sense = csdev->sense;
- memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
- rq->sense_len = csdev->senselen = 0;
-
- rq->cmd[0] = INQUIRY;
- if (page != 0) {
- rq->cmd[1] = 1;
- rq->cmd[2] = page;
- }
- err = blk_execute_rq(sdev->request_queue, NULL, rq, 1);
- if (err == -EIO) {
- sdev_printk(KERN_INFO, sdev,
- "%s: failed to send %s INQUIRY: %x\n",
- CLARIION_NAME, page?"EVPD":"standard",
- rq->errors);
- csdev->senselen = rq->sense_len;
- err = SCSI_DH_IO;
- }
-
- blk_put_request(rq);
-
- return err;
-}
-
static int send_trespass_cmd(struct scsi_device *sdev,
struct clariion_dh_data *csdev)
{
- struct request *rq;
unsigned char *page22;
- int err, len, cmd;
+ unsigned char cdb[COMMAND_SIZE(MODE_SELECT)];
+ int err, res = SCSI_DH_OK, len;
+ struct scsi_sense_hdr sshdr;
if (csdev->flags & CLARIION_SHORT_TRESPASS) {
page22 = short_trespass;
@@ -361,40 +259,37 @@ static int send_trespass_cmd(struct scsi_device *sdev,
/* Set Honor Reservations bit */
page22[6] |= 0x80;
len = sizeof(short_trespass);
- cmd = MODE_SELECT;
+ cdb[0] = MODE_SELECT;
+ cdb[1] = 0x10;
+ cdb[4] = len;
} else {
page22 = long_trespass;
if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS))
/* Set Honor Reservations bit */
page22[10] |= 0x80;
len = sizeof(long_trespass);
- cmd = MODE_SELECT_10;
+ cdb[0] = MODE_SELECT_10;
+ cdb[8] = len;
}
BUG_ON((len > CLARIION_BUFFER_SIZE));
memcpy(csdev->buffer, page22, len);
- rq = get_req(sdev, cmd, csdev->buffer);
- if (!rq)
- return SCSI_DH_RES_TEMP_UNAVAIL;
-
- rq->sense = csdev->sense;
- memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
- rq->sense_len = csdev->senselen = 0;
-
- err = blk_execute_rq(sdev->request_queue, NULL, rq, 1);
- if (err == -EIO) {
- if (rq->sense_len) {
- err = trespass_endio(sdev, csdev->sense);
- } else {
+ err = scsi_execute_req_flags(sdev, cdb, DMA_TO_DEVICE,
+ csdev->buffer, len, &sshdr,
+ CLARIION_TIMEOUT * HZ, CLARIION_RETRIES,
+ NULL, REQ_FAILFAST_MASK);
+ if (err) {
+ if (scsi_sense_valid(&sshdr))
+ res = trespass_endio(sdev, &sshdr);
+ else {
sdev_printk(KERN_INFO, sdev,
"%s: failed to send MODE SELECT: %x\n",
- CLARIION_NAME, rq->errors);
+ CLARIION_NAME, err);
+ res = SCSI_DH_IO;
}
}
- blk_put_request(rq);
-
- return err;
+ return res;
}
static int clariion_check_sense(struct scsi_device *sdev,
@@ -464,21 +359,7 @@ static int clariion_std_inquiry(struct scsi_device *sdev,
int err;
char *sp_model;
- err = send_inquiry_cmd(sdev, 0, csdev);
- if (err != SCSI_DH_OK && csdev->senselen) {
- struct scsi_sense_hdr sshdr;
-
- if (scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE,
- &sshdr)) {
- sdev_printk(KERN_ERR, sdev, "%s: INQUIRY sense code "
- "%02x/%02x/%02x\n", CLARIION_NAME,
- sshdr.sense_key, sshdr.asc, sshdr.ascq);
- }
- err = SCSI_DH_IO;
- goto out;
- }
-
- sp_model = parse_sp_model(sdev, csdev->buffer);
+ sp_model = parse_sp_model(sdev, sdev->inquiry);
if (!sp_model) {
err = SCSI_DH_DEV_UNSUPP;
goto out;
@@ -500,30 +381,12 @@ static int clariion_std_inquiry(struct scsi_device *sdev,
static int clariion_send_inquiry(struct scsi_device *sdev,
struct clariion_dh_data *csdev)
{
- int err, retry = CLARIION_RETRIES;
-
-retry:
- err = send_inquiry_cmd(sdev, 0xC0, csdev);
- if (err != SCSI_DH_OK && csdev->senselen) {
- struct scsi_sense_hdr sshdr;
-
- err = scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE,
- &sshdr);
- if (!err)
- return SCSI_DH_IO;
-
- err = clariion_check_sense(sdev, &sshdr);
- if (retry > 0 && err == ADD_TO_MLQUEUE) {
- retry--;
- goto retry;
- }
- sdev_printk(KERN_ERR, sdev, "%s: INQUIRY sense code "
- "%02x/%02x/%02x\n", CLARIION_NAME,
- sshdr.sense_key, sshdr.asc, sshdr.ascq);
- err = SCSI_DH_IO;
- } else {
+ int err = SCSI_DH_IO;
+
+ if (!scsi_get_vpd_page(sdev, 0xC0, csdev->buffer,
+ CLARIION_BUFFER_SIZE))
err = parse_sp_info_reply(sdev, csdev);
- }
+
return err;
}
--
2.6.6
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 3/3] scsi_dh_hp_sw: switch to scsi_execute_req_flags()
2016-10-31 17:59 [PATCH 0/3] scsi_dh: switch to scsi_execute_req_flags() Hannes Reinecke
2016-10-31 17:59 ` [PATCH 1/3] scsi_dh_rdac: " Hannes Reinecke
2016-10-31 17:59 ` [PATCH 2/3] scsi_dh_emc: " Hannes Reinecke
@ 2016-10-31 17:59 ` Hannes Reinecke
2016-11-01 14:41 ` [PATCH 0/3] scsi_dh: " Christoph Hellwig
3 siblings, 0 replies; 8+ messages in thread
From: Hannes Reinecke @ 2016-10-31 17:59 UTC (permalink / raw)
To: Martin K. Petersen
Cc: Christoph Hellwig, James Bottomley, linux-scsi, Hannes Reinecke,
Hannes Reinecke
Switch to using scsi_execute_req_flags() instead of using the
block primitives.
Signed-off-by: Hannes Reinecke <hare@suse.com>
---
drivers/scsi/device_handler/scsi_dh_hp_sw.c | 218 ++++++++--------------------
1 file changed, 61 insertions(+), 157 deletions(-)
diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
index 9406d5f..84afe2f 100644
--- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c
+++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
@@ -38,13 +38,10 @@
#define HP_SW_PATH_PASSIVE 1
struct hp_sw_dh_data {
- unsigned char sense[SCSI_SENSE_BUFFERSIZE];
int path_state;
int retries;
int retry_cnt;
struct scsi_device *sdev;
- activate_complete callback_fn;
- void *callback_data;
};
static int hp_sw_start_stop(struct hp_sw_dh_data *);
@@ -56,43 +53,34 @@ static int hp_sw_start_stop(struct hp_sw_dh_data *);
*
* Returns SCSI_DH_DEV_OFFLINED if the sdev is on the passive path
*/
-static int tur_done(struct scsi_device *sdev, unsigned char *sense)
+static int tur_done(struct scsi_device *sdev, struct hp_sw_dh_data *h,
+ struct scsi_sense_hdr *sshdr)
{
- struct scsi_sense_hdr sshdr;
- int ret;
+ int ret = SCSI_DH_IO;
- ret = scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr);
- if (!ret) {
- sdev_printk(KERN_WARNING, sdev,
- "%s: sending tur failed, no sense available\n",
- HP_SW_NAME);
- ret = SCSI_DH_IO;
- goto done;
- }
- switch (sshdr.sense_key) {
+ switch (sshdr->sense_key) {
case UNIT_ATTENTION:
ret = SCSI_DH_IMM_RETRY;
break;
case NOT_READY:
- if ((sshdr.asc == 0x04) && (sshdr.ascq == 2)) {
+ if ((sshdr->asc == 0x04) && (sshdr->ascq == 2)) {
/*
* LUN not ready - Initialization command required
*
* This is the passive path
*/
- ret = SCSI_DH_DEV_OFFLINED;
+ h->path_state = HP_SW_PATH_PASSIVE;
+ ret = SCSI_DH_OK;
break;
}
/* Fallthrough */
default:
sdev_printk(KERN_WARNING, sdev,
"%s: sending tur failed, sense %x/%x/%x\n",
- HP_SW_NAME, sshdr.sense_key, sshdr.asc,
- sshdr.ascq);
+ HP_SW_NAME, sshdr->sense_key, sshdr->asc,
+ sshdr->ascq);
break;
}
-
-done:
return ret;
}
@@ -105,131 +93,34 @@ static int tur_done(struct scsi_device *sdev, unsigned char *sense)
*/
static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h)
{
- struct request *req;
- int ret;
+ unsigned char cmd[6] = { TEST_UNIT_READY };
+ struct scsi_sense_hdr sshdr;
+ int ret = SCSI_DH_OK, res;
retry:
- req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO);
- if (IS_ERR(req))
- return SCSI_DH_RES_TEMP_UNAVAIL;
-
- blk_rq_set_block_pc(req);
- req->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
- REQ_FAILFAST_DRIVER;
- req->cmd_len = COMMAND_SIZE(TEST_UNIT_READY);
- req->cmd[0] = TEST_UNIT_READY;
- req->timeout = HP_SW_TIMEOUT;
- req->sense = h->sense;
- memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE);
- req->sense_len = 0;
-
- ret = blk_execute_rq(req->q, NULL, req, 1);
- if (ret == -EIO) {
- if (req->sense_len > 0) {
- ret = tur_done(sdev, h->sense);
- } else {
+ res = scsi_execute_req_flags(sdev, cmd, DMA_NONE, NULL, 0, &sshdr,
+ HP_SW_TIMEOUT, HP_SW_RETRIES,
+ NULL, REQ_FAILFAST_MASK);
+ if (res) {
+ if (scsi_sense_valid(&sshdr))
+ ret = tur_done(sdev, h, &sshdr);
+ else {
sdev_printk(KERN_WARNING, sdev,
"%s: sending tur failed with %x\n",
- HP_SW_NAME, req->errors);
+ HP_SW_NAME, res);
ret = SCSI_DH_IO;
}
} else {
h->path_state = HP_SW_PATH_ACTIVE;
ret = SCSI_DH_OK;
}
- if (ret == SCSI_DH_IMM_RETRY) {
- blk_put_request(req);
+ if (ret == SCSI_DH_IMM_RETRY)
goto retry;
- }
- if (ret == SCSI_DH_DEV_OFFLINED) {
- h->path_state = HP_SW_PATH_PASSIVE;
- ret = SCSI_DH_OK;
- }
-
- blk_put_request(req);
return ret;
}
/*
- * start_done - Handle START STOP UNIT return status
- * @sdev: sdev the command has been sent to
- * @errors: blk error code
- */
-static int start_done(struct scsi_device *sdev, unsigned char *sense)
-{
- struct scsi_sense_hdr sshdr;
- int rc;
-
- rc = scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr);
- if (!rc) {
- sdev_printk(KERN_WARNING, sdev,
- "%s: sending start_stop_unit failed, "
- "no sense available\n",
- HP_SW_NAME);
- return SCSI_DH_IO;
- }
- switch (sshdr.sense_key) {
- case NOT_READY:
- if ((sshdr.asc == 0x04) && (sshdr.ascq == 3)) {
- /*
- * LUN not ready - manual intervention required
- *
- * Switch-over in progress, retry.
- */
- rc = SCSI_DH_RETRY;
- break;
- }
- /* fall through */
- default:
- sdev_printk(KERN_WARNING, sdev,
- "%s: sending start_stop_unit failed, sense %x/%x/%x\n",
- HP_SW_NAME, sshdr.sense_key, sshdr.asc,
- sshdr.ascq);
- rc = SCSI_DH_IO;
- }
-
- return rc;
-}
-
-static void start_stop_endio(struct request *req, int error)
-{
- struct hp_sw_dh_data *h = req->end_io_data;
- unsigned err = SCSI_DH_OK;
-
- if (error || host_byte(req->errors) != DID_OK ||
- msg_byte(req->errors) != COMMAND_COMPLETE) {
- sdev_printk(KERN_WARNING, h->sdev,
- "%s: sending start_stop_unit failed with %x\n",
- HP_SW_NAME, req->errors);
- err = SCSI_DH_IO;
- goto done;
- }
-
- if (req->sense_len > 0) {
- err = start_done(h->sdev, h->sense);
- if (err == SCSI_DH_RETRY) {
- err = SCSI_DH_IO;
- if (--h->retry_cnt) {
- blk_put_request(req);
- err = hp_sw_start_stop(h);
- if (err == SCSI_DH_OK)
- return;
- }
- }
- }
-done:
- req->end_io_data = NULL;
- __blk_put_request(req->q, req);
- if (h->callback_fn) {
- h->callback_fn(h->callback_data, err);
- h->callback_fn = h->callback_data = NULL;
- }
- return;
-
-}
-
-/*
* hp_sw_start_stop - Send START STOP UNIT command
* @sdev: sdev command should be sent to
*
@@ -237,26 +128,46 @@ static void start_stop_endio(struct request *req, int error)
*/
static int hp_sw_start_stop(struct hp_sw_dh_data *h)
{
- struct request *req;
-
- req = blk_get_request(h->sdev->request_queue, WRITE, GFP_ATOMIC);
- if (IS_ERR(req))
- return SCSI_DH_RES_TEMP_UNAVAIL;
-
- blk_rq_set_block_pc(req);
- req->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
- REQ_FAILFAST_DRIVER;
- req->cmd_len = COMMAND_SIZE(START_STOP);
- req->cmd[0] = START_STOP;
- req->cmd[4] = 1; /* Start spin cycle */
- req->timeout = HP_SW_TIMEOUT;
- req->sense = h->sense;
- memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE);
- req->sense_len = 0;
- req->end_io_data = h;
+ unsigned char cmd[6] = { START_STOP, 0, 0, 0, 1, 0 }; /* START_VALID */
+ struct scsi_sense_hdr sshdr;
+ struct scsi_device *sdev = h->sdev;
+ int res, rc = SCSI_DH_OK;
+ int retry_cnt = HP_SW_RETRIES;
- blk_execute_rq_nowait(req->q, NULL, req, 1, start_stop_endio);
- return SCSI_DH_OK;
+retry:
+ res = scsi_execute_req_flags(sdev, cmd, DMA_NONE, NULL, 0, &sshdr,
+ HP_SW_TIMEOUT, HP_SW_RETRIES,
+ NULL, REQ_FAILFAST_MASK);
+ if (res) {
+ if (!scsi_sense_valid(&sshdr)) {
+ sdev_printk(KERN_WARNING, sdev,
+ "%s: sending start_stop_unit failed, "
+ "no sense available\n", HP_SW_NAME);
+ return SCSI_DH_IO;
+ }
+ switch (sshdr.sense_key) {
+ case NOT_READY:
+ if ((sshdr.asc == 0x04) && (sshdr.ascq == 3)) {
+ /*
+ * LUN not ready - manual intervention required
+ *
+ * Switch-over in progress, retry.
+ */
+ if (--retry_cnt)
+ goto retry;
+ rc = SCSI_DH_RETRY;
+ break;
+ }
+ /* fall through */
+ default:
+ sdev_printk(KERN_WARNING, sdev,
+ "%s: sending start_stop_unit failed, "
+ "sense %x/%x/%x\n", HP_SW_NAME,
+ sshdr.sense_key, sshdr.asc, sshdr.ascq);
+ rc = SCSI_DH_IO;
+ }
+ }
+ return rc;
}
static int hp_sw_prep_fn(struct scsi_device *sdev, struct request *req)
@@ -290,15 +201,8 @@ static int hp_sw_activate(struct scsi_device *sdev,
ret = hp_sw_tur(sdev, h);
- if (ret == SCSI_DH_OK && h->path_state == HP_SW_PATH_PASSIVE) {
- h->retry_cnt = h->retries;
- h->callback_fn = fn;
- h->callback_data = data;
+ if (ret == SCSI_DH_OK && h->path_state == HP_SW_PATH_PASSIVE)
ret = hp_sw_start_stop(h);
- if (ret == SCSI_DH_OK)
- return 0;
- h->callback_fn = h->callback_data = NULL;
- }
if (fn)
fn(data, ret);
--
2.6.6
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 0/3] scsi_dh: switch to scsi_execute_req_flags()
2016-10-31 17:59 [PATCH 0/3] scsi_dh: switch to scsi_execute_req_flags() Hannes Reinecke
` (2 preceding siblings ...)
2016-10-31 17:59 ` [PATCH 3/3] scsi_dh_hp_sw: " Hannes Reinecke
@ 2016-11-01 14:41 ` Christoph Hellwig
2016-11-01 17:00 ` Hannes Reinecke
3 siblings, 1 reply; 8+ messages in thread
From: Christoph Hellwig @ 2016-11-01 14:41 UTC (permalink / raw)
To: Hannes Reinecke
Cc: Martin K. Petersen, Christoph Hellwig, James Bottomley, linux-scsi
A little warning: scsi_execute_req_flags grew a new argument in the block
tree to be able to specify the request-only flags. So any of these
patches would create a (mostly harmless) conflict in linux-next.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/3] scsi_dh_rdac: switch to scsi_execute_req_flags()
2016-10-31 17:59 ` [PATCH 1/3] scsi_dh_rdac: " Hannes Reinecke
@ 2016-11-01 14:47 ` Christoph Hellwig
2016-11-01 19:22 ` Hannes Reinecke
0 siblings, 1 reply; 8+ messages in thread
From: Christoph Hellwig @ 2016-11-01 14:47 UTC (permalink / raw)
To: Hannes Reinecke
Cc: Martin K. Petersen, Christoph Hellwig, James Bottomley,
linux-scsi, Hannes Reinecke
On Mon, Oct 31, 2016 at 06:59:28PM +0100, Hannes Reinecke wrote:
> Switch to using scsi_execute_req_flags() instead of using the
> block primitives.
__scsi_execute adds RQF_QUIET and RQF_PREEMPT to the request flags, which
would be a change in behavior. A little analysis on why that's safe or
even desireable would be nice. (This also applies to the other two patches
I think).
>
> static void release_controller(struct kref *kref)
> static int get_lun_info(struct scsi_device *sdev, struct rdac_dh_data *h,
> char *array_name, u8 *array_id)
> {
> + int err = SCSI_DH_IO, i;
> struct c8_inquiry *inqp;
>
> + if (!scsi_get_vpd_page(sdev, 0xC8, (unsigned char *)h,
> + sizeof(struct c8_inquiry))) {
This looks completely bogus to me - h is a struct rdac_dh_data pointer,
which is an in-kernel data structure that scsi_get_vpd_page would
scramble over.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 0/3] scsi_dh: switch to scsi_execute_req_flags()
2016-11-01 14:41 ` [PATCH 0/3] scsi_dh: " Christoph Hellwig
@ 2016-11-01 17:00 ` Hannes Reinecke
0 siblings, 0 replies; 8+ messages in thread
From: Hannes Reinecke @ 2016-11-01 17:00 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Martin K. Petersen, James Bottomley, linux-scsi, Jens Axboe
On 11/01/2016 03:41 PM, Christoph Hellwig wrote:
> A little warning: scsi_execute_req_flags grew a new argument in the block
> tree to be able to specify the request-only flags. So any of these
> patches would create a (mostly harmless) conflict in linux-next.
>
I don't mind creating the patches against the block tree.
Martin? Jens? What's the preferred way here?
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@suse.de +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/3] scsi_dh_rdac: switch to scsi_execute_req_flags()
2016-11-01 14:47 ` Christoph Hellwig
@ 2016-11-01 19:22 ` Hannes Reinecke
0 siblings, 0 replies; 8+ messages in thread
From: Hannes Reinecke @ 2016-11-01 19:22 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Martin K. Petersen, James Bottomley, linux-scsi, Hannes Reinecke
On 11/01/2016 03:47 PM, Christoph Hellwig wrote:
> On Mon, Oct 31, 2016 at 06:59:28PM +0100, Hannes Reinecke wrote:
>> Switch to using scsi_execute_req_flags() instead of using the
>> block primitives.
>
> __scsi_execute adds RQF_QUIET and RQF_PREEMPT to the request flags, which
> would be a change in behavior. A little analysis on why that's safe or
> even desireable would be nice. (This also applies to the other two patches
> I think).
>
Hmm. Yeah, guess I'll need to reconcile that.
>>
>> static void release_controller(struct kref *kref)
>> static int get_lun_info(struct scsi_device *sdev, struct rdac_dh_data *h,
>> char *array_name, u8 *array_id)
>> {
>> + int err = SCSI_DH_IO, i;
>> struct c8_inquiry *inqp;
>>
>> + if (!scsi_get_vpd_page(sdev, 0xC8, (unsigned char *)h,
>> + sizeof(struct c8_inquiry))) {
>
> This looks completely bogus to me - h is a struct rdac_dh_data pointer,
> which is an in-kernel data structure that scsi_get_vpd_page would
> scramble over.
>
Indeed, you are right. I'll be fixing it up.
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@suse.de +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2016-11-01 19:22 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-10-31 17:59 [PATCH 0/3] scsi_dh: switch to scsi_execute_req_flags() Hannes Reinecke
2016-10-31 17:59 ` [PATCH 1/3] scsi_dh_rdac: " Hannes Reinecke
2016-11-01 14:47 ` Christoph Hellwig
2016-11-01 19:22 ` Hannes Reinecke
2016-10-31 17:59 ` [PATCH 2/3] scsi_dh_emc: " Hannes Reinecke
2016-10-31 17:59 ` [PATCH 3/3] scsi_dh_hp_sw: " Hannes Reinecke
2016-11-01 14:41 ` [PATCH 0/3] scsi_dh: " Christoph Hellwig
2016-11-01 17:00 ` Hannes Reinecke
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.