[PATCHv3 0/4] Add Altera A10SR Status & Control Monitor

[PATCHv3 0/4] Add Altera A10SR Status & Control Monitor

[tthayer]

From: Thor Thayer <tthayer@opensource.altera.com>

his patch series adds the Altera Arria10 DevKit System Resource
chip's Status and Control Monitor to the A10SR Multi-Function
Device. An earlier patch added this to the hwmon class which
wasn't the proper place so this functionality is added to the
misc directory.
Version 2 changes the DT names from -mon to -monitor for better
readability and clarity and changed the previous version from
modular to built-in.
Version 3 improves the DT bindings naming and removes an unused
variable.

Thor Thayer (4):
  dt-bindings: mfd: Add Altera Arria10 SR Monitor
  misc: Add Altera Arria10 System Resource Control
  mfd: altr-a10sr: Add Arria10 SR Monitor
  ARM: socfpga: dts: Add Monitor to A10-SR MFD

 .../devicetree/bindings/mfd/altera-a10sr.txt       |  11 +-
 MAINTAINERS                                        |   1 +
 arch/arm/boot/dts/socfpga_arria10_socdk.dtsi       |   4 +
 drivers/mfd/altera-a10sr.c                         |   6 +-
 drivers/misc/Kconfig                               |   7 +
 drivers/misc/Makefile                              |   1 +
 drivers/misc/altera-a10sr-monitor.c                | 175 +++++++++++++++++++++
 7 files changed, 203 insertions(+), 2 deletions(-)
 create mode 100644 drivers/misc/altera-a10sr-monitor.c

-- 
1.9.1

[PATCHv3 0/4] Add Altera A10SR Status & Control Monitor

[tthayer at opensource.altera.com]

From: Thor Thayer <tthayer@opensource.altera.com>

his patch series adds the Altera Arria10 DevKit System Resource
chip's Status and Control Monitor to the A10SR Multi-Function
Device. An earlier patch added this to the hwmon class which
wasn't the proper place so this functionality is added to the
misc directory.
Version 2 changes the DT names from -mon to -monitor for better
readability and clarity and changed the previous version from
modular to built-in.
Version 3 improves the DT bindings naming and removes an unused
variable.

Thor Thayer (4):
  dt-bindings: mfd: Add Altera Arria10 SR Monitor
  misc: Add Altera Arria10 System Resource Control
  mfd: altr-a10sr: Add Arria10 SR Monitor
  ARM: socfpga: dts: Add Monitor to A10-SR MFD

 .../devicetree/bindings/mfd/altera-a10sr.txt       |  11 +-
 MAINTAINERS                                        |   1 +
 arch/arm/boot/dts/socfpga_arria10_socdk.dtsi       |   4 +
 drivers/mfd/altera-a10sr.c                         |   6 +-
 drivers/misc/Kconfig                               |   7 +
 drivers/misc/Makefile                              |   1 +
 drivers/misc/altera-a10sr-monitor.c                | 175 +++++++++++++++++++++
 7 files changed, 203 insertions(+), 2 deletions(-)
 create mode 100644 drivers/misc/altera-a10sr-monitor.c

-- 
1.9.1

[PATCHv3 0/4] Add Altera A10SR Status & Control Monitor

[tthayer]

From: Thor Thayer <tthayer@opensource.altera.com>

his patch series adds the Altera Arria10 DevKit System Resource
chip's Status and Control Monitor to the A10SR Multi-Function
Device. An earlier patch added this to the hwmon class which
wasn't the proper place so this functionality is added to the
misc directory.
Version 2 changes the DT names from -mon to -monitor for better
readability and clarity and changed the previous version from
modular to built-in.
Version 3 improves the DT bindings naming and removes an unused
variable.

Thor Thayer (4):
  dt-bindings: mfd: Add Altera Arria10 SR Monitor
  misc: Add Altera Arria10 System Resource Control
  mfd: altr-a10sr: Add Arria10 SR Monitor
  ARM: socfpga: dts: Add Monitor to A10-SR MFD

 .../devicetree/bindings/mfd/altera-a10sr.txt       |  11 +-
 MAINTAINERS                                        |   1 +
 arch/arm/boot/dts/socfpga_arria10_socdk.dtsi       |   4 +
 drivers/mfd/altera-a10sr.c                         |   6 +-
 drivers/misc/Kconfig                               |   7 +
 drivers/misc/Makefile                              |   1 +
 drivers/misc/altera-a10sr-monitor.c                | 175 +++++++++++++++++++++
 7 files changed, 203 insertions(+), 2 deletions(-)
 create mode 100644 drivers/misc/altera-a10sr-monitor.c

-- 
1.9.1

[PATCHv3 1/4] dt-bindings: mfd: Add Altera Arria10 SR Monitor

[tthayer]

From: Thor Thayer <tthayer@opensource.altera.com>

Add the Arria10 DevKit System Resource Chip register and state
monitoring module to the MFD.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
Note: This needs to be applied to the bindings document that
was Acked & Applied but didn't reach the for-next branch.
See https://patchwork.ozlabs.org/patch/629397/
---
v2  Change compatible string -mon to -monitor for clarity
v3  Replace node name a10sr_monitor with just monitor.
    Replace node name a10sr_gpio with just gpio.
---
 Documentation/devicetree/bindings/mfd/altera-a10sr.txt | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
index ea151f2..69243d2 100644
--- a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
+++ b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
@@ -17,7 +17,8 @@ The A10SR consists of these sub-devices:
 
 Device                   Description
 ------                   ----------
-a10sr_gpio               GPIO Controller
+gpio                     GPIO Controller
+monitor                  Register and State Monitoring
 
 Arria10 GPIO
 Required Properties:
@@ -27,6 +28,10 @@ Required Properties:
                       the second cell is used to specify flags.
                       See ../gpio/gpio.txt for more information.
 
+Arria10 Register and State Monitor
+Required Properties:
+- compatible        : Should be "altr,a10sr-monitor"
+
 Example:
 
         resource-manager@0 {
@@ -43,4 +48,8 @@ Example:
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
+
+		monitor {
+			compatible = "altr,a10sr-monitor";
+		};
 	};
-- 
1.9.1

[PATCHv3 1/4] dt-bindings: mfd: Add Altera Arria10 SR Monitor

[tthayer at opensource.altera.com]

From: Thor Thayer <tthayer@opensource.altera.com>

Add the Arria10 DevKit System Resource Chip register and state
monitoring module to the MFD.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
Note: This needs to be applied to the bindings document that
was Acked & Applied but didn't reach the for-next branch.
See https://patchwork.ozlabs.org/patch/629397/
---
v2  Change compatible string -mon to -monitor for clarity
v3  Replace node name a10sr_monitor with just monitor.
    Replace node name a10sr_gpio with just gpio.
---
 Documentation/devicetree/bindings/mfd/altera-a10sr.txt | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
index ea151f2..69243d2 100644
--- a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
+++ b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
@@ -17,7 +17,8 @@ The A10SR consists of these sub-devices:
 
 Device                   Description
 ------                   ----------
-a10sr_gpio               GPIO Controller
+gpio                     GPIO Controller
+monitor                  Register and State Monitoring
 
 Arria10 GPIO
 Required Properties:
@@ -27,6 +28,10 @@ Required Properties:
                       the second cell is used to specify flags.
                       See ../gpio/gpio.txt for more information.
 
+Arria10 Register and State Monitor
+Required Properties:
+- compatible        : Should be "altr,a10sr-monitor"
+
 Example:
 
         resource-manager at 0 {
@@ -43,4 +48,8 @@ Example:
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
+
+		monitor {
+			compatible = "altr,a10sr-monitor";
+		};
 	};
-- 
1.9.1

[PATCHv3 1/4] dt-bindings: mfd: Add Altera Arria10 SR Monitor

[tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx]

From: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>

Add the Arria10 DevKit System Resource Chip register and state
monitoring module to the MFD.

Signed-off-by: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
---
Note: This needs to be applied to the bindings document that
was Acked & Applied but didn't reach the for-next branch.
See https://patchwork.ozlabs.org/patch/629397/
---
v2  Change compatible string -mon to -monitor for clarity
v3  Replace node name a10sr_monitor with just monitor.
    Replace node name a10sr_gpio with just gpio.
---
 Documentation/devicetree/bindings/mfd/altera-a10sr.txt | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
index ea151f2..69243d2 100644
--- a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
+++ b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
@@ -17,7 +17,8 @@ The A10SR consists of these sub-devices:
 
 Device                   Description
 ------                   ----------
-a10sr_gpio               GPIO Controller
+gpio                     GPIO Controller
+monitor                  Register and State Monitoring
 
 Arria10 GPIO
 Required Properties:
@@ -27,6 +28,10 @@ Required Properties:
                       the second cell is used to specify flags.
                       See ../gpio/gpio.txt for more information.
 
+Arria10 Register and State Monitor
+Required Properties:
+- compatible        : Should be "altr,a10sr-monitor"
+
 Example:
 
         resource-manager@0 {
@@ -43,4 +48,8 @@ Example:
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
+
+		monitor {
+			compatible = "altr,a10sr-monitor";
+		};
 	};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCHv3 1/4] dt-bindings: mfd: Add Altera Arria10 SR Monitor

[Lee Jones]

On Wed, 02 Nov 2016, tthayer@opensource.altera.com wrote:

> From: Thor Thayer <tthayer@opensource.altera.com>
> 
> Add the Arria10 DevKit System Resource Chip register and state
> monitoring module to the MFD.
> 
> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
> ---
> Note: This needs to be applied to the bindings document that
> was Acked & Applied but didn't reach the for-next branch.
> See https://patchwork.ozlabs.org/patch/629397/
> ---
> v2  Change compatible string -mon to -monitor for clarity
> v3  Replace node name a10sr_monitor with just monitor.
>     Replace node name a10sr_gpio with just gpio.
> ---
>  Documentation/devicetree/bindings/mfd/altera-a10sr.txt | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)

For my own reference:
  Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

> diff --git a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
> index ea151f2..69243d2 100644
> --- a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
> +++ b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
> @@ -17,7 +17,8 @@ The A10SR consists of these sub-devices:
>  
>  Device                   Description
>  ------                   ----------
> -a10sr_gpio               GPIO Controller
> +gpio                     GPIO Controller
> +monitor                  Register and State Monitoring
>  
>  Arria10 GPIO
>  Required Properties:
> @@ -27,6 +28,10 @@ Required Properties:
>                        the second cell is used to specify flags.
>                        See ../gpio/gpio.txt for more information.
>  
> +Arria10 Register and State Monitor
> +Required Properties:
> +- compatible        : Should be "altr,a10sr-monitor"
> +
>  Example:
>  
>          resource-manager@0 {
> @@ -43,4 +48,8 @@ Example:
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
> +
> +		monitor {
> +			compatible = "altr,a10sr-monitor";
> +		};
>  	};

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCHv3 1/4] dt-bindings: mfd: Add Altera Arria10 SR Monitor

[Lee Jones]

On Wed, 02 Nov 2016, tthayer at opensource.altera.com wrote:

> From: Thor Thayer <tthayer@opensource.altera.com>
> 
> Add the Arria10 DevKit System Resource Chip register and state
> monitoring module to the MFD.
> 
> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
> ---
> Note: This needs to be applied to the bindings document that
> was Acked & Applied but didn't reach the for-next branch.
> See https://patchwork.ozlabs.org/patch/629397/
> ---
> v2  Change compatible string -mon to -monitor for clarity
> v3  Replace node name a10sr_monitor with just monitor.
>     Replace node name a10sr_gpio with just gpio.
> ---
>  Documentation/devicetree/bindings/mfd/altera-a10sr.txt | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)

For my own reference:
  Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

> diff --git a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
> index ea151f2..69243d2 100644
> --- a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
> +++ b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
> @@ -17,7 +17,8 @@ The A10SR consists of these sub-devices:
>  
>  Device                   Description
>  ------                   ----------
> -a10sr_gpio               GPIO Controller
> +gpio                     GPIO Controller
> +monitor                  Register and State Monitoring
>  
>  Arria10 GPIO
>  Required Properties:
> @@ -27,6 +28,10 @@ Required Properties:
>                        the second cell is used to specify flags.
>                        See ../gpio/gpio.txt for more information.
>  
> +Arria10 Register and State Monitor
> +Required Properties:
> +- compatible        : Should be "altr,a10sr-monitor"
> +
>  Example:
>  
>          resource-manager at 0 {
> @@ -43,4 +48,8 @@ Example:
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
> +
> +		monitor {
> +			compatible = "altr,a10sr-monitor";
> +		};
>  	};

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCHv3 1/4] dt-bindings: mfd: Add Altera Arria10 SR Monitor

[Rob Herring]

On Wed, Nov 02, 2016 at 09:32:55AM -0500, tthayer@opensource.altera.com wrote:
> From: Thor Thayer <tthayer@opensource.altera.com>
> 
> Add the Arria10 DevKit System Resource Chip register and state
> monitoring module to the MFD.
> 
> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
> ---
> Note: This needs to be applied to the bindings document that
> was Acked & Applied but didn't reach the for-next branch.
> See https://patchwork.ozlabs.org/patch/629397/
> ---
> v2  Change compatible string -mon to -monitor for clarity
> v3  Replace node name a10sr_monitor with just monitor.
>     Replace node name a10sr_gpio with just gpio.
> ---
>  Documentation/devicetree/bindings/mfd/altera-a10sr.txt | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)

Acked-by: Rob Herring <robh@kernel.org>

[PATCHv3 1/4] dt-bindings: mfd: Add Altera Arria10 SR Monitor

[Rob Herring]

On Wed, Nov 02, 2016 at 09:32:55AM -0500, tthayer at opensource.altera.com wrote:
> From: Thor Thayer <tthayer@opensource.altera.com>
> 
> Add the Arria10 DevKit System Resource Chip register and state
> monitoring module to the MFD.
> 
> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
> ---
> Note: This needs to be applied to the bindings document that
> was Acked & Applied but didn't reach the for-next branch.
> See https://patchwork.ozlabs.org/patch/629397/
> ---
> v2  Change compatible string -mon to -monitor for clarity
> v3  Replace node name a10sr_monitor with just monitor.
>     Replace node name a10sr_gpio with just gpio.
> ---
>  Documentation/devicetree/bindings/mfd/altera-a10sr.txt | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCHv3 1/4] dt-bindings: mfd: Add Altera Arria10 SR Monitor

[Rob Herring]

On Wed, Nov 02, 2016 at 09:32:55AM -0500, tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org wrote:
> From: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
> 
> Add the Arria10 DevKit System Resource Chip register and state
> monitoring module to the MFD.
> 
> Signed-off-by: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
> ---
> Note: This needs to be applied to the bindings document that
> was Acked & Applied but didn't reach the for-next branch.
> See https://patchwork.ozlabs.org/patch/629397/
> ---
> v2  Change compatible string -mon to -monitor for clarity
> v3  Replace node name a10sr_monitor with just monitor.
>     Replace node name a10sr_gpio with just gpio.
> ---
>  Documentation/devicetree/bindings/mfd/altera-a10sr.txt | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv3 2/4] misc: Add Altera Arria10 System Resource Control

[tthayer]

From: Thor Thayer <tthayer@opensource.altera.com>

This patch adds the Altera Arria10 control & monitoring
functions to the Arria10 System Resource chip.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
v2  Change compatible string and filename from -mon to -monitor
    Change CONFIG from module to builtin.
    Make wm_rst register writeable.
v3  Remove unused ret variable.
    Shorten driver name (remove altr_).
---
 MAINTAINERS                         |   1 +
 drivers/misc/Kconfig                |   7 ++
 drivers/misc/Makefile               |   1 +
 drivers/misc/altera-a10sr-monitor.c | 175 ++++++++++++++++++++++++++++++++++++
 4 files changed, 184 insertions(+)
 create mode 100644 drivers/misc/altera-a10sr-monitor.c

diff --git a/MAINTAINERS b/MAINTAINERS
index b180821..baf2404 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -635,6 +635,7 @@ M:	Thor Thayer <tthayer@opensource.altera.com>
 S:	Maintained
 F:	drivers/gpio/gpio-altera-a10sr.c
 F:	drivers/mfd/altera-a10sr.c
+F: 	drivers/misc/altera-a10sr-monitor.c
 F:	include/linux/mfd/altera-a10sr.h
 
 ALTERA TRIPLE SPEED ETHERNET DRIVER
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 64971ba..f42d459 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -766,6 +766,13 @@ config PANEL_BOOT_MESSAGE
 	  An empty message will only clear the display at driver init time. Any other
 	  printf()-formatted message is valid with newline and escape codes.
 
+config ALTERA_A10SR_MONITOR
+	bool "Altera Arria10 System Resource Monitor"
+	depends on MFD_ALTERA_A10SR
+	help
+	  This enables the System Resource monitor driver for the Altera
+	  Arria10 DevKit.
+
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 3198336..9f6e77a 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -43,6 +43,7 @@ obj-y				+= ti-st/
 obj-y				+= lis3lv02d/
 obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o
 obj-$(CONFIG_ALTERA_STAPL)	+=altera-stapl/
+obj-$(CONFIG_ALTERA_A10SR_MONITOR)	+= altera-a10sr-monitor.o
 obj-$(CONFIG_INTEL_MEI)		+= mei/
 obj-$(CONFIG_VMWARE_VMCI)	+= vmw_vmci/
 obj-$(CONFIG_LATTICE_ECP3_CONFIG)	+= lattice-ecp3-config.o
diff --git a/drivers/misc/altera-a10sr-monitor.c b/drivers/misc/altera-a10sr-monitor.c
new file mode 100644
index 0000000..66338e0
--- /dev/null
+++ b/drivers/misc/altera-a10sr-monitor.c
@@ -0,0 +1,175 @@
+/*
+ * Altera Arria10 DevKit System Resource Chip Monitor Driver
+ *
+ * Author: Thor Thayer <tthayer@opensource.altera.com>
+ *
+ * Copyright Intel Corporation (C) 2014-2016. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Monitor driver for the Altera Arria10 MAX5 System Resource Chip
+ * Adapted from ics932s401.c
+ */
+
+#include <linux/err.h>
+#include <linux/mfd/altera-a10sr.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct altr_a10sr_regs {
+	struct regmap		*regmap;
+	struct attribute_group	attr_grp;
+};
+
+static ssize_t a10sr_show(struct device *dev,
+			  struct device_attribute *devattr, char *buf);
+static ssize_t a10sr_store(struct device *dev,
+			   struct device_attribute *devattr, const char *buf,
+			   size_t count);
+
+/* Define FS entries */
+static DEVICE_ATTR(max5_version, 0444, a10sr_show, NULL);
+static DEVICE_ATTR(max5_led, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_button, 0444, a10sr_show, NULL);
+static DEVICE_ATTR(max5_button_irq, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_pg1, 0444, a10sr_show, NULL);
+static DEVICE_ATTR(max5_pg2, 0444, a10sr_show, NULL);
+static DEVICE_ATTR(max5_pg3, 0444, a10sr_show, NULL);
+static DEVICE_ATTR(max5_fmcab, 0444, a10sr_show, NULL);
+static DEVICE_ATTR(max5_hps_resets, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_per_resets, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_sfpa, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_sfpb, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_i2c_master, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_wm_rst, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_wm_rst_key, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_pmbus, 0644, a10sr_show, a10sr_store);
+
+static struct attribute *altr_a10sr_attr[] = {
+	&dev_attr_max5_version.attr,
+	&dev_attr_max5_led.attr,
+	&dev_attr_max5_button.attr,
+	&dev_attr_max5_button_irq.attr,
+	&dev_attr_max5_pg1.attr,
+	&dev_attr_max5_pg2.attr,
+	&dev_attr_max5_pg3.attr,
+	&dev_attr_max5_fmcab.attr,
+	&dev_attr_max5_hps_resets.attr,
+	&dev_attr_max5_per_resets.attr,
+	&dev_attr_max5_sfpa.attr,
+	&dev_attr_max5_sfpb.attr,
+	&dev_attr_max5_i2c_master.attr,
+	&dev_attr_max5_wm_rst.attr,
+	&dev_attr_max5_wm_rst_key.attr,
+	&dev_attr_max5_pmbus.attr,
+	NULL
+};
+
+static const struct attribute_group a10sr_attr_group = {
+	.attrs = altr_a10sr_attr,
+};
+
+static ssize_t a10sr_show(struct device *dev, struct device_attribute *devattr,
+			  char *buf)
+{
+	int i, ret;
+	unsigned int val;
+	struct altr_a10sr_regs *a10sr_regs = dev_get_drvdata(dev);
+
+	for (i = 0; i < ARRAY_SIZE(altr_a10sr_attr); i++) {
+		if (devattr == (struct device_attribute *)altr_a10sr_attr[i])
+			break;
+	}
+
+	if (i >= ARRAY_SIZE(altr_a10sr_attr))
+		return -EINVAL;
+
+	/* Shift because LS bit set by regmap for Read */
+	i <<= 1;
+	ret = regmap_read(a10sr_regs->regmap, i, &val);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "0x%X\n", val);
+}
+
+static ssize_t a10sr_store(struct device *dev,
+			   struct device_attribute *devattr, const char *buf,
+			   size_t count)
+{
+	struct altr_a10sr_regs *a10sr_regs = dev_get_drvdata(dev);
+	unsigned long val;
+	int i, ret;
+
+	ret = kstrtol(buf, 0, &val);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(altr_a10sr_attr); i++) {
+		if (devattr == (struct device_attribute *)altr_a10sr_attr[i])
+			break;
+	}
+	if (i >= ARRAY_SIZE(altr_a10sr_attr))
+		return -EINVAL;
+
+	/* Shift because LS bit cleared by regmap for Write */
+	i <<= 1;
+	ret = regmap_write(a10sr_regs->regmap, i, val);
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static int altr_a10sr_regs_probe(struct platform_device *pdev)
+{
+	struct altr_a10sr_regs *a10regs;
+	struct altr_a10sr *a10sr = dev_get_drvdata(pdev->dev.parent);
+
+	a10regs = devm_kzalloc(&pdev->dev, sizeof(*a10regs), GFP_KERNEL);
+	if (!a10regs)
+		return -ENOMEM;
+
+	a10regs->regmap = a10sr->regmap;
+	a10regs->attr_grp = a10sr_attr_group;
+
+	platform_set_drvdata(pdev, a10regs);
+
+	return sysfs_create_group(&pdev->dev.kobj, &a10sr_attr_group);
+}
+
+static int altr_a10sr_regs_remove(struct platform_device *pdev)
+{
+	struct altr_a10sr_regs *a10regs = platform_get_drvdata(pdev);
+
+	sysfs_remove_group(&pdev->dev.kobj, &a10regs->attr_grp);
+
+	return 0;
+}
+
+static const struct of_device_id altr_a10sr_regs_of_match[] = {
+	{ .compatible = "altr,a10sr-monitor" },
+	{ },
+};
+
+static struct platform_driver altr_a10sr_regs_driver = {
+	.probe = altr_a10sr_regs_probe,
+	.remove = altr_a10sr_regs_remove,
+	.driver = {
+		.name = "a10sr_monitor",
+		.of_match_table = altr_a10sr_regs_of_match,
+	},
+};
+
+builtin_platform_driver(altr_a10sr_regs_driver);
-- 
1.9.1

[PATCHv3 2/4] misc: Add Altera Arria10 System Resource Control

[tthayer at opensource.altera.com]

From: Thor Thayer <tthayer@opensource.altera.com>

This patch adds the Altera Arria10 control & monitoring
functions to the Arria10 System Resource chip.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
v2  Change compatible string and filename from -mon to -monitor
    Change CONFIG from module to builtin.
    Make wm_rst register writeable.
v3  Remove unused ret variable.
    Shorten driver name (remove altr_).
---
 MAINTAINERS                         |   1 +
 drivers/misc/Kconfig                |   7 ++
 drivers/misc/Makefile               |   1 +
 drivers/misc/altera-a10sr-monitor.c | 175 ++++++++++++++++++++++++++++++++++++
 4 files changed, 184 insertions(+)
 create mode 100644 drivers/misc/altera-a10sr-monitor.c

diff --git a/MAINTAINERS b/MAINTAINERS
index b180821..baf2404 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -635,6 +635,7 @@ M:	Thor Thayer <tthayer@opensource.altera.com>
 S:	Maintained
 F:	drivers/gpio/gpio-altera-a10sr.c
 F:	drivers/mfd/altera-a10sr.c
+F: 	drivers/misc/altera-a10sr-monitor.c
 F:	include/linux/mfd/altera-a10sr.h
 
 ALTERA TRIPLE SPEED ETHERNET DRIVER
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 64971ba..f42d459 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -766,6 +766,13 @@ config PANEL_BOOT_MESSAGE
 	  An empty message will only clear the display at driver init time. Any other
 	  printf()-formatted message is valid with newline and escape codes.
 
+config ALTERA_A10SR_MONITOR
+	bool "Altera Arria10 System Resource Monitor"
+	depends on MFD_ALTERA_A10SR
+	help
+	  This enables the System Resource monitor driver for the Altera
+	  Arria10 DevKit.
+
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 3198336..9f6e77a 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -43,6 +43,7 @@ obj-y				+= ti-st/
 obj-y				+= lis3lv02d/
 obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o
 obj-$(CONFIG_ALTERA_STAPL)	+=altera-stapl/
+obj-$(CONFIG_ALTERA_A10SR_MONITOR)	+= altera-a10sr-monitor.o
 obj-$(CONFIG_INTEL_MEI)		+= mei/
 obj-$(CONFIG_VMWARE_VMCI)	+= vmw_vmci/
 obj-$(CONFIG_LATTICE_ECP3_CONFIG)	+= lattice-ecp3-config.o
diff --git a/drivers/misc/altera-a10sr-monitor.c b/drivers/misc/altera-a10sr-monitor.c
new file mode 100644
index 0000000..66338e0
--- /dev/null
+++ b/drivers/misc/altera-a10sr-monitor.c
@@ -0,0 +1,175 @@
+/*
+ * Altera Arria10 DevKit System Resource Chip Monitor Driver
+ *
+ * Author: Thor Thayer <tthayer@opensource.altera.com>
+ *
+ * Copyright Intel Corporation (C) 2014-2016. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Monitor driver for the Altera Arria10 MAX5 System Resource Chip
+ * Adapted from ics932s401.c
+ */
+
+#include <linux/err.h>
+#include <linux/mfd/altera-a10sr.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct altr_a10sr_regs {
+	struct regmap		*regmap;
+	struct attribute_group	attr_grp;
+};
+
+static ssize_t a10sr_show(struct device *dev,
+			  struct device_attribute *devattr, char *buf);
+static ssize_t a10sr_store(struct device *dev,
+			   struct device_attribute *devattr, const char *buf,
+			   size_t count);
+
+/* Define FS entries */
+static DEVICE_ATTR(max5_version, 0444, a10sr_show, NULL);
+static DEVICE_ATTR(max5_led, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_button, 0444, a10sr_show, NULL);
+static DEVICE_ATTR(max5_button_irq, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_pg1, 0444, a10sr_show, NULL);
+static DEVICE_ATTR(max5_pg2, 0444, a10sr_show, NULL);
+static DEVICE_ATTR(max5_pg3, 0444, a10sr_show, NULL);
+static DEVICE_ATTR(max5_fmcab, 0444, a10sr_show, NULL);
+static DEVICE_ATTR(max5_hps_resets, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_per_resets, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_sfpa, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_sfpb, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_i2c_master, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_wm_rst, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_wm_rst_key, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_pmbus, 0644, a10sr_show, a10sr_store);
+
+static struct attribute *altr_a10sr_attr[] = {
+	&dev_attr_max5_version.attr,
+	&dev_attr_max5_led.attr,
+	&dev_attr_max5_button.attr,
+	&dev_attr_max5_button_irq.attr,
+	&dev_attr_max5_pg1.attr,
+	&dev_attr_max5_pg2.attr,
+	&dev_attr_max5_pg3.attr,
+	&dev_attr_max5_fmcab.attr,
+	&dev_attr_max5_hps_resets.attr,
+	&dev_attr_max5_per_resets.attr,
+	&dev_attr_max5_sfpa.attr,
+	&dev_attr_max5_sfpb.attr,
+	&dev_attr_max5_i2c_master.attr,
+	&dev_attr_max5_wm_rst.attr,
+	&dev_attr_max5_wm_rst_key.attr,
+	&dev_attr_max5_pmbus.attr,
+	NULL
+};
+
+static const struct attribute_group a10sr_attr_group = {
+	.attrs = altr_a10sr_attr,
+};
+
+static ssize_t a10sr_show(struct device *dev, struct device_attribute *devattr,
+			  char *buf)
+{
+	int i, ret;
+	unsigned int val;
+	struct altr_a10sr_regs *a10sr_regs = dev_get_drvdata(dev);
+
+	for (i = 0; i < ARRAY_SIZE(altr_a10sr_attr); i++) {
+		if (devattr == (struct device_attribute *)altr_a10sr_attr[i])
+			break;
+	}
+
+	if (i >= ARRAY_SIZE(altr_a10sr_attr))
+		return -EINVAL;
+
+	/* Shift because LS bit set by regmap for Read */
+	i <<= 1;
+	ret = regmap_read(a10sr_regs->regmap, i, &val);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "0x%X\n", val);
+}
+
+static ssize_t a10sr_store(struct device *dev,
+			   struct device_attribute *devattr, const char *buf,
+			   size_t count)
+{
+	struct altr_a10sr_regs *a10sr_regs = dev_get_drvdata(dev);
+	unsigned long val;
+	int i, ret;
+
+	ret = kstrtol(buf, 0, &val);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(altr_a10sr_attr); i++) {
+		if (devattr == (struct device_attribute *)altr_a10sr_attr[i])
+			break;
+	}
+	if (i >= ARRAY_SIZE(altr_a10sr_attr))
+		return -EINVAL;
+
+	/* Shift because LS bit cleared by regmap for Write */
+	i <<= 1;
+	ret = regmap_write(a10sr_regs->regmap, i, val);
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static int altr_a10sr_regs_probe(struct platform_device *pdev)
+{
+	struct altr_a10sr_regs *a10regs;
+	struct altr_a10sr *a10sr = dev_get_drvdata(pdev->dev.parent);
+
+	a10regs = devm_kzalloc(&pdev->dev, sizeof(*a10regs), GFP_KERNEL);
+	if (!a10regs)
+		return -ENOMEM;
+
+	a10regs->regmap = a10sr->regmap;
+	a10regs->attr_grp = a10sr_attr_group;
+
+	platform_set_drvdata(pdev, a10regs);
+
+	return sysfs_create_group(&pdev->dev.kobj, &a10sr_attr_group);
+}
+
+static int altr_a10sr_regs_remove(struct platform_device *pdev)
+{
+	struct altr_a10sr_regs *a10regs = platform_get_drvdata(pdev);
+
+	sysfs_remove_group(&pdev->dev.kobj, &a10regs->attr_grp);
+
+	return 0;
+}
+
+static const struct of_device_id altr_a10sr_regs_of_match[] = {
+	{ .compatible = "altr,a10sr-monitor" },
+	{ },
+};
+
+static struct platform_driver altr_a10sr_regs_driver = {
+	.probe = altr_a10sr_regs_probe,
+	.remove = altr_a10sr_regs_remove,
+	.driver = {
+		.name = "a10sr_monitor",
+		.of_match_table = altr_a10sr_regs_of_match,
+	},
+};
+
+builtin_platform_driver(altr_a10sr_regs_driver);
-- 
1.9.1

[PATCHv3 2/4] misc: Add Altera Arria10 System Resource Control

[tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx]

From: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>

This patch adds the Altera Arria10 control & monitoring
functions to the Arria10 System Resource chip.

Signed-off-by: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
---
v2  Change compatible string and filename from -mon to -monitor
    Change CONFIG from module to builtin.
    Make wm_rst register writeable.
v3  Remove unused ret variable.
    Shorten driver name (remove altr_).
---
 MAINTAINERS                         |   1 +
 drivers/misc/Kconfig                |   7 ++
 drivers/misc/Makefile               |   1 +
 drivers/misc/altera-a10sr-monitor.c | 175 ++++++++++++++++++++++++++++++++++++
 4 files changed, 184 insertions(+)
 create mode 100644 drivers/misc/altera-a10sr-monitor.c

diff --git a/MAINTAINERS b/MAINTAINERS
index b180821..baf2404 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -635,6 +635,7 @@ M:	Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
 S:	Maintained
 F:	drivers/gpio/gpio-altera-a10sr.c
 F:	drivers/mfd/altera-a10sr.c
+F: 	drivers/misc/altera-a10sr-monitor.c
 F:	include/linux/mfd/altera-a10sr.h
 
 ALTERA TRIPLE SPEED ETHERNET DRIVER
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 64971ba..f42d459 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -766,6 +766,13 @@ config PANEL_BOOT_MESSAGE
 	  An empty message will only clear the display at driver init time. Any other
 	  printf()-formatted message is valid with newline and escape codes.
 
+config ALTERA_A10SR_MONITOR
+	bool "Altera Arria10 System Resource Monitor"
+	depends on MFD_ALTERA_A10SR
+	help
+	  This enables the System Resource monitor driver for the Altera
+	  Arria10 DevKit.
+
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 3198336..9f6e77a 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -43,6 +43,7 @@ obj-y				+= ti-st/
 obj-y				+= lis3lv02d/
 obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o
 obj-$(CONFIG_ALTERA_STAPL)	+=altera-stapl/
+obj-$(CONFIG_ALTERA_A10SR_MONITOR)	+= altera-a10sr-monitor.o
 obj-$(CONFIG_INTEL_MEI)		+= mei/
 obj-$(CONFIG_VMWARE_VMCI)	+= vmw_vmci/
 obj-$(CONFIG_LATTICE_ECP3_CONFIG)	+= lattice-ecp3-config.o
diff --git a/drivers/misc/altera-a10sr-monitor.c b/drivers/misc/altera-a10sr-monitor.c
new file mode 100644
index 0000000..66338e0
--- /dev/null
+++ b/drivers/misc/altera-a10sr-monitor.c
@@ -0,0 +1,175 @@
+/*
+ * Altera Arria10 DevKit System Resource Chip Monitor Driver
+ *
+ * Author: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
+ *
+ * Copyright Intel Corporation (C) 2014-2016. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Monitor driver for the Altera Arria10 MAX5 System Resource Chip
+ * Adapted from ics932s401.c
+ */
+
+#include <linux/err.h>
+#include <linux/mfd/altera-a10sr.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct altr_a10sr_regs {
+	struct regmap		*regmap;
+	struct attribute_group	attr_grp;
+};
+
+static ssize_t a10sr_show(struct device *dev,
+			  struct device_attribute *devattr, char *buf);
+static ssize_t a10sr_store(struct device *dev,
+			   struct device_attribute *devattr, const char *buf,
+			   size_t count);
+
+/* Define FS entries */
+static DEVICE_ATTR(max5_version, 0444, a10sr_show, NULL);
+static DEVICE_ATTR(max5_led, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_button, 0444, a10sr_show, NULL);
+static DEVICE_ATTR(max5_button_irq, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_pg1, 0444, a10sr_show, NULL);
+static DEVICE_ATTR(max5_pg2, 0444, a10sr_show, NULL);
+static DEVICE_ATTR(max5_pg3, 0444, a10sr_show, NULL);
+static DEVICE_ATTR(max5_fmcab, 0444, a10sr_show, NULL);
+static DEVICE_ATTR(max5_hps_resets, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_per_resets, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_sfpa, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_sfpb, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_i2c_master, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_wm_rst, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_wm_rst_key, 0644, a10sr_show, a10sr_store);
+static DEVICE_ATTR(max5_pmbus, 0644, a10sr_show, a10sr_store);
+
+static struct attribute *altr_a10sr_attr[] = {
+	&dev_attr_max5_version.attr,
+	&dev_attr_max5_led.attr,
+	&dev_attr_max5_button.attr,
+	&dev_attr_max5_button_irq.attr,
+	&dev_attr_max5_pg1.attr,
+	&dev_attr_max5_pg2.attr,
+	&dev_attr_max5_pg3.attr,
+	&dev_attr_max5_fmcab.attr,
+	&dev_attr_max5_hps_resets.attr,
+	&dev_attr_max5_per_resets.attr,
+	&dev_attr_max5_sfpa.attr,
+	&dev_attr_max5_sfpb.attr,
+	&dev_attr_max5_i2c_master.attr,
+	&dev_attr_max5_wm_rst.attr,
+	&dev_attr_max5_wm_rst_key.attr,
+	&dev_attr_max5_pmbus.attr,
+	NULL
+};
+
+static const struct attribute_group a10sr_attr_group = {
+	.attrs = altr_a10sr_attr,
+};
+
+static ssize_t a10sr_show(struct device *dev, struct device_attribute *devattr,
+			  char *buf)
+{
+	int i, ret;
+	unsigned int val;
+	struct altr_a10sr_regs *a10sr_regs = dev_get_drvdata(dev);
+
+	for (i = 0; i < ARRAY_SIZE(altr_a10sr_attr); i++) {
+		if (devattr == (struct device_attribute *)altr_a10sr_attr[i])
+			break;
+	}
+
+	if (i >= ARRAY_SIZE(altr_a10sr_attr))
+		return -EINVAL;
+
+	/* Shift because LS bit set by regmap for Read */
+	i <<= 1;
+	ret = regmap_read(a10sr_regs->regmap, i, &val);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "0x%X\n", val);
+}
+
+static ssize_t a10sr_store(struct device *dev,
+			   struct device_attribute *devattr, const char *buf,
+			   size_t count)
+{
+	struct altr_a10sr_regs *a10sr_regs = dev_get_drvdata(dev);
+	unsigned long val;
+	int i, ret;
+
+	ret = kstrtol(buf, 0, &val);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(altr_a10sr_attr); i++) {
+		if (devattr == (struct device_attribute *)altr_a10sr_attr[i])
+			break;
+	}
+	if (i >= ARRAY_SIZE(altr_a10sr_attr))
+		return -EINVAL;
+
+	/* Shift because LS bit cleared by regmap for Write */
+	i <<= 1;
+	ret = regmap_write(a10sr_regs->regmap, i, val);
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static int altr_a10sr_regs_probe(struct platform_device *pdev)
+{
+	struct altr_a10sr_regs *a10regs;
+	struct altr_a10sr *a10sr = dev_get_drvdata(pdev->dev.parent);
+
+	a10regs = devm_kzalloc(&pdev->dev, sizeof(*a10regs), GFP_KERNEL);
+	if (!a10regs)
+		return -ENOMEM;
+
+	a10regs->regmap = a10sr->regmap;
+	a10regs->attr_grp = a10sr_attr_group;
+
+	platform_set_drvdata(pdev, a10regs);
+
+	return sysfs_create_group(&pdev->dev.kobj, &a10sr_attr_group);
+}
+
+static int altr_a10sr_regs_remove(struct platform_device *pdev)
+{
+	struct altr_a10sr_regs *a10regs = platform_get_drvdata(pdev);
+
+	sysfs_remove_group(&pdev->dev.kobj, &a10regs->attr_grp);
+
+	return 0;
+}
+
+static const struct of_device_id altr_a10sr_regs_of_match[] = {
+	{ .compatible = "altr,a10sr-monitor" },
+	{ },
+};
+
+static struct platform_driver altr_a10sr_regs_driver = {
+	.probe = altr_a10sr_regs_probe,
+	.remove = altr_a10sr_regs_remove,
+	.driver = {
+		.name = "a10sr_monitor",
+		.of_match_table = altr_a10sr_regs_of_match,
+	},
+};
+
+builtin_platform_driver(altr_a10sr_regs_driver);
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCHv3 2/4] misc: Add Altera Arria10 System Resource Control

[Greg KH]

On Wed, Nov 02, 2016 at 09:32:56AM -0500, tthayer@opensource.altera.com wrote:
> From: Thor Thayer <tthayer@opensource.altera.com>
> 
> This patch adds the Altera Arria10 control & monitoring
> functions to the Arria10 System Resource chip.
> 
> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
> ---
> v2  Change compatible string and filename from -mon to -monitor
>     Change CONFIG from module to builtin.
>     Make wm_rst register writeable.
> v3  Remove unused ret variable.
>     Shorten driver name (remove altr_).
> ---
>  MAINTAINERS                         |   1 +
>  drivers/misc/Kconfig                |   7 ++
>  drivers/misc/Makefile               |   1 +
>  drivers/misc/altera-a10sr-monitor.c | 175 ++++++++++++++++++++++++++++++++++++
>  4 files changed, 184 insertions(+)
>  create mode 100644 drivers/misc/altera-a10sr-monitor.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index b180821..baf2404 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -635,6 +635,7 @@ M:	Thor Thayer <tthayer@opensource.altera.com>
>  S:	Maintained
>  F:	drivers/gpio/gpio-altera-a10sr.c
>  F:	drivers/mfd/altera-a10sr.c
> +F: 	drivers/misc/altera-a10sr-monitor.c
>  F:	include/linux/mfd/altera-a10sr.h
>  
>  ALTERA TRIPLE SPEED ETHERNET DRIVER
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index 64971ba..f42d459 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -766,6 +766,13 @@ config PANEL_BOOT_MESSAGE
>  	  An empty message will only clear the display at driver init time. Any other
>  	  printf()-formatted message is valid with newline and escape codes.
>  
> +config ALTERA_A10SR_MONITOR
> +	bool "Altera Arria10 System Resource Monitor"
> +	depends on MFD_ALTERA_A10SR
> +	help
> +	  This enables the System Resource monitor driver for the Altera
> +	  Arria10 DevKit.
> +
>  source "drivers/misc/c2port/Kconfig"
>  source "drivers/misc/eeprom/Kconfig"
>  source "drivers/misc/cb710/Kconfig"
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index 3198336..9f6e77a 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -43,6 +43,7 @@ obj-y				+= ti-st/
>  obj-y				+= lis3lv02d/
>  obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o
>  obj-$(CONFIG_ALTERA_STAPL)	+=altera-stapl/
> +obj-$(CONFIG_ALTERA_A10SR_MONITOR)	+= altera-a10sr-monitor.o
>  obj-$(CONFIG_INTEL_MEI)		+= mei/
>  obj-$(CONFIG_VMWARE_VMCI)	+= vmw_vmci/
>  obj-$(CONFIG_LATTICE_ECP3_CONFIG)	+= lattice-ecp3-config.o
> diff --git a/drivers/misc/altera-a10sr-monitor.c b/drivers/misc/altera-a10sr-monitor.c
> new file mode 100644
> index 0000000..66338e0
> --- /dev/null
> +++ b/drivers/misc/altera-a10sr-monitor.c
> @@ -0,0 +1,175 @@
> +/*
> + * Altera Arria10 DevKit System Resource Chip Monitor Driver
> + *
> + * Author: Thor Thayer <tthayer@opensource.altera.com>
> + *
> + * Copyright Intel Corporation (C) 2014-2016. All Rights Reserved
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + *
> + * Monitor driver for the Altera Arria10 MAX5 System Resource Chip
> + * Adapted from ics932s401.c
> + */
> +
> +#include <linux/err.h>
> +#include <linux/mfd/altera-a10sr.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +struct altr_a10sr_regs {
> +	struct regmap		*regmap;
> +	struct attribute_group	attr_grp;
> +};
> +
> +static ssize_t a10sr_show(struct device *dev,
> +			  struct device_attribute *devattr, char *buf);
> +static ssize_t a10sr_store(struct device *dev,
> +			   struct device_attribute *devattr, const char *buf,
> +			   size_t count);
> +
> +/* Define FS entries */
> +static DEVICE_ATTR(max5_version, 0444, a10sr_show, NULL);
> +static DEVICE_ATTR(max5_led, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_button, 0444, a10sr_show, NULL);
> +static DEVICE_ATTR(max5_button_irq, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_pg1, 0444, a10sr_show, NULL);
> +static DEVICE_ATTR(max5_pg2, 0444, a10sr_show, NULL);
> +static DEVICE_ATTR(max5_pg3, 0444, a10sr_show, NULL);
> +static DEVICE_ATTR(max5_fmcab, 0444, a10sr_show, NULL);
> +static DEVICE_ATTR(max5_hps_resets, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_per_resets, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_sfpa, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_sfpb, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_i2c_master, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_wm_rst, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_wm_rst_key, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_pmbus, 0644, a10sr_show, a10sr_store);

Please add a Documentation/ABI file to describe all of thes new sysfs
files that you are saying will be present for all of time.

And do you really want userspace access like this to these values?
Shouldn't things like the led and button use the proper led and input
layers instead?


> +static int altr_a10sr_regs_probe(struct platform_device *pdev)
> +{
> +	struct altr_a10sr_regs *a10regs;
> +	struct altr_a10sr *a10sr = dev_get_drvdata(pdev->dev.parent);
> +
> +	a10regs = devm_kzalloc(&pdev->dev, sizeof(*a10regs), GFP_KERNEL);
> +	if (!a10regs)
> +		return -ENOMEM;
> +
> +	a10regs->regmap = a10sr->regmap;
> +	a10regs->attr_grp = a10sr_attr_group;
> +
> +	platform_set_drvdata(pdev, a10regs);
> +
> +	return sysfs_create_group(&pdev->dev.kobj, &a10sr_attr_group);

You just raced userspace and lost :(

Please set the group file properly, and then the driver core should set
this up for you correctly.

thanks,

greg k-h

[PATCHv3 2/4] misc: Add Altera Arria10 System Resource Control

[Greg KH]

On Wed, Nov 02, 2016 at 09:32:56AM -0500, tthayer at opensource.altera.com wrote:
> From: Thor Thayer <tthayer@opensource.altera.com>
> 
> This patch adds the Altera Arria10 control & monitoring
> functions to the Arria10 System Resource chip.
> 
> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
> ---
> v2  Change compatible string and filename from -mon to -monitor
>     Change CONFIG from module to builtin.
>     Make wm_rst register writeable.
> v3  Remove unused ret variable.
>     Shorten driver name (remove altr_).
> ---
>  MAINTAINERS                         |   1 +
>  drivers/misc/Kconfig                |   7 ++
>  drivers/misc/Makefile               |   1 +
>  drivers/misc/altera-a10sr-monitor.c | 175 ++++++++++++++++++++++++++++++++++++
>  4 files changed, 184 insertions(+)
>  create mode 100644 drivers/misc/altera-a10sr-monitor.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index b180821..baf2404 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -635,6 +635,7 @@ M:	Thor Thayer <tthayer@opensource.altera.com>
>  S:	Maintained
>  F:	drivers/gpio/gpio-altera-a10sr.c
>  F:	drivers/mfd/altera-a10sr.c
> +F: 	drivers/misc/altera-a10sr-monitor.c
>  F:	include/linux/mfd/altera-a10sr.h
>  
>  ALTERA TRIPLE SPEED ETHERNET DRIVER
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index 64971ba..f42d459 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -766,6 +766,13 @@ config PANEL_BOOT_MESSAGE
>  	  An empty message will only clear the display at driver init time. Any other
>  	  printf()-formatted message is valid with newline and escape codes.
>  
> +config ALTERA_A10SR_MONITOR
> +	bool "Altera Arria10 System Resource Monitor"
> +	depends on MFD_ALTERA_A10SR
> +	help
> +	  This enables the System Resource monitor driver for the Altera
> +	  Arria10 DevKit.
> +
>  source "drivers/misc/c2port/Kconfig"
>  source "drivers/misc/eeprom/Kconfig"
>  source "drivers/misc/cb710/Kconfig"
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index 3198336..9f6e77a 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -43,6 +43,7 @@ obj-y				+= ti-st/
>  obj-y				+= lis3lv02d/
>  obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o
>  obj-$(CONFIG_ALTERA_STAPL)	+=altera-stapl/
> +obj-$(CONFIG_ALTERA_A10SR_MONITOR)	+= altera-a10sr-monitor.o
>  obj-$(CONFIG_INTEL_MEI)		+= mei/
>  obj-$(CONFIG_VMWARE_VMCI)	+= vmw_vmci/
>  obj-$(CONFIG_LATTICE_ECP3_CONFIG)	+= lattice-ecp3-config.o
> diff --git a/drivers/misc/altera-a10sr-monitor.c b/drivers/misc/altera-a10sr-monitor.c
> new file mode 100644
> index 0000000..66338e0
> --- /dev/null
> +++ b/drivers/misc/altera-a10sr-monitor.c
> @@ -0,0 +1,175 @@
> +/*
> + * Altera Arria10 DevKit System Resource Chip Monitor Driver
> + *
> + * Author: Thor Thayer <tthayer@opensource.altera.com>
> + *
> + * Copyright Intel Corporation (C) 2014-2016. All Rights Reserved
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + *
> + * Monitor driver for the Altera Arria10 MAX5 System Resource Chip
> + * Adapted from ics932s401.c
> + */
> +
> +#include <linux/err.h>
> +#include <linux/mfd/altera-a10sr.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +struct altr_a10sr_regs {
> +	struct regmap		*regmap;
> +	struct attribute_group	attr_grp;
> +};
> +
> +static ssize_t a10sr_show(struct device *dev,
> +			  struct device_attribute *devattr, char *buf);
> +static ssize_t a10sr_store(struct device *dev,
> +			   struct device_attribute *devattr, const char *buf,
> +			   size_t count);
> +
> +/* Define FS entries */
> +static DEVICE_ATTR(max5_version, 0444, a10sr_show, NULL);
> +static DEVICE_ATTR(max5_led, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_button, 0444, a10sr_show, NULL);
> +static DEVICE_ATTR(max5_button_irq, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_pg1, 0444, a10sr_show, NULL);
> +static DEVICE_ATTR(max5_pg2, 0444, a10sr_show, NULL);
> +static DEVICE_ATTR(max5_pg3, 0444, a10sr_show, NULL);
> +static DEVICE_ATTR(max5_fmcab, 0444, a10sr_show, NULL);
> +static DEVICE_ATTR(max5_hps_resets, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_per_resets, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_sfpa, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_sfpb, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_i2c_master, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_wm_rst, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_wm_rst_key, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_pmbus, 0644, a10sr_show, a10sr_store);

Please add a Documentation/ABI file to describe all of thes new sysfs
files that you are saying will be present for all of time.

And do you really want userspace access like this to these values?
Shouldn't things like the led and button use the proper led and input
layers instead?


> +static int altr_a10sr_regs_probe(struct platform_device *pdev)
> +{
> +	struct altr_a10sr_regs *a10regs;
> +	struct altr_a10sr *a10sr = dev_get_drvdata(pdev->dev.parent);
> +
> +	a10regs = devm_kzalloc(&pdev->dev, sizeof(*a10regs), GFP_KERNEL);
> +	if (!a10regs)
> +		return -ENOMEM;
> +
> +	a10regs->regmap = a10sr->regmap;
> +	a10regs->attr_grp = a10sr_attr_group;
> +
> +	platform_set_drvdata(pdev, a10regs);
> +
> +	return sysfs_create_group(&pdev->dev.kobj, &a10sr_attr_group);

You just raced userspace and lost :(

Please set the group file properly, and then the driver core should set
this up for you correctly.

thanks,

greg k-h

[PATCHv3 3/4] mfd: altr-a10sr: Add Arria10 SR Monitor

[tthayer]

From: Thor Thayer <tthayer@opensource.altera.com>

Add the Altera Arria10 DevKit System Resource Monitor functionality
to the MFD device.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---
v2  Change from -mon to -monitor for clarity
v3  Shorten driver name (remove altr_).
---
 drivers/mfd/altera-a10sr.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/altera-a10sr.c b/drivers/mfd/altera-a10sr.c
index 06e1f7f..2ddf235 100644
--- a/drivers/mfd/altera-a10sr.c
+++ b/drivers/mfd/altera-a10sr.c
@@ -30,9 +30,13 @@
 
 static const struct mfd_cell altr_a10sr_subdev_info[] = {
 	{
-		.name = "altr_a10sr_gpio",
+		.name = "a10sr_gpio",
 		.of_compatible = "altr,a10sr-gpio",
 	},
+	{
+		.name = "a10sr_monitor",
+		.of_compatible = "altr,a10sr-monitor",
+	},
 };
 
 static bool altr_a10sr_reg_readable(struct device *dev, unsigned int reg)
-- 
1.9.1

[PATCHv3 3/4] mfd: altr-a10sr: Add Arria10 SR Monitor

[tthayer at opensource.altera.com]

From: Thor Thayer <tthayer@opensource.altera.com>

Add the Altera Arria10 DevKit System Resource Monitor functionality
to the MFD device.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---
v2  Change from -mon to -monitor for clarity
v3  Shorten driver name (remove altr_).
---
 drivers/mfd/altera-a10sr.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/altera-a10sr.c b/drivers/mfd/altera-a10sr.c
index 06e1f7f..2ddf235 100644
--- a/drivers/mfd/altera-a10sr.c
+++ b/drivers/mfd/altera-a10sr.c
@@ -30,9 +30,13 @@
 
 static const struct mfd_cell altr_a10sr_subdev_info[] = {
 	{
-		.name = "altr_a10sr_gpio",
+		.name = "a10sr_gpio",
 		.of_compatible = "altr,a10sr-gpio",
 	},
+	{
+		.name = "a10sr_monitor",
+		.of_compatible = "altr,a10sr-monitor",
+	},
 };
 
 static bool altr_a10sr_reg_readable(struct device *dev, unsigned int reg)
-- 
1.9.1

[PATCHv3 3/4] mfd: altr-a10sr: Add Arria10 SR Monitor

[tthayer]

From: Thor Thayer <tthayer@opensource.altera.com>

Add the Altera Arria10 DevKit System Resource Monitor functionality
to the MFD device.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---
v2  Change from -mon to -monitor for clarity
v3  Shorten driver name (remove altr_).
---
 drivers/mfd/altera-a10sr.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/altera-a10sr.c b/drivers/mfd/altera-a10sr.c
index 06e1f7f..2ddf235 100644
--- a/drivers/mfd/altera-a10sr.c
+++ b/drivers/mfd/altera-a10sr.c
@@ -30,9 +30,13 @@
 
 static const struct mfd_cell altr_a10sr_subdev_info[] = {
 	{
-		.name = "altr_a10sr_gpio",
+		.name = "a10sr_gpio",
 		.of_compatible = "altr,a10sr-gpio",
 	},
+	{
+		.name = "a10sr_monitor",
+		.of_compatible = "altr,a10sr-monitor",
+	},
 };
 
 static bool altr_a10sr_reg_readable(struct device *dev, unsigned int reg)
-- 
1.9.1

[PATCHv3 4/4] ARM: socfpga: dts: Add Monitor to A10-SR MFD

[tthayer]

From: Thor Thayer <tthayer@opensource.altera.com>

Add the Monitor functionality to the Arria10 DevKit
System Resource chip.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
v2  Change from -mon to -monitor for clarity.
v3  Change node name from a10_monitor to monitor.
---
 arch/arm/boot/dts/socfpga_arria10_socdk.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
index eb00ae3..996e745 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
@@ -121,6 +121,10 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
+
+		monitor {
+			compatible = "altr,a10sr-monitor";
+		};
 	};
 };
 
-- 
1.9.1

[PATCHv3 4/4] ARM: socfpga: dts: Add Monitor to A10-SR MFD

[tthayer at opensource.altera.com]

From: Thor Thayer <tthayer@opensource.altera.com>

Add the Monitor functionality to the Arria10 DevKit
System Resource chip.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
v2  Change from -mon to -monitor for clarity.
v3  Change node name from a10_monitor to monitor.
---
 arch/arm/boot/dts/socfpga_arria10_socdk.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
index eb00ae3..996e745 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
@@ -121,6 +121,10 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
+
+		monitor {
+			compatible = "altr,a10sr-monitor";
+		};
 	};
 };
 
-- 
1.9.1

[PATCHv3 4/4] ARM: socfpga: dts: Add Monitor to A10-SR MFD

[tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx]

From: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>

Add the Monitor functionality to the Arria10 DevKit
System Resource chip.

Signed-off-by: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
---
v2  Change from -mon to -monitor for clarity.
v3  Change node name from a10_monitor to monitor.
---
 arch/arm/boot/dts/socfpga_arria10_socdk.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
index eb00ae3..996e745 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
@@ -121,6 +121,10 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
+
+		monitor {
+			compatible = "altr,a10sr-monitor";
+		};
 	};
 };
 
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCHv3 4/4] ARM: socfpga: dts: Add Monitor to A10-SR MFD

[Dinh Nguyen]

On 11/02/2016 09:32 AM, tthayer@opensource.altera.com wrote:
> From: Thor Thayer <tthayer@opensource.altera.com>
> 
> Add the Monitor functionality to the Arria10 DevKit
> System Resource chip.
> 
> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
> ---
> v2  Change from -mon to -monitor for clarity.
> v3  Change node name from a10_monitor to monitor.
> ---
>  arch/arm/boot/dts/socfpga_arria10_socdk.dtsi | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
> index eb00ae3..996e745 100644
> --- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
> +++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
> @@ -121,6 +121,10 @@
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
> +
> +		monitor {
> +			compatible = "altr,a10sr-monitor";
> +		};
>  	};
>  };
>  
> 

Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>

[PATCHv3 4/4] ARM: socfpga: dts: Add Monitor to A10-SR MFD

[Dinh Nguyen]

On 11/02/2016 09:32 AM, tthayer at opensource.altera.com wrote:
> From: Thor Thayer <tthayer@opensource.altera.com>
> 
> Add the Monitor functionality to the Arria10 DevKit
> System Resource chip.
> 
> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
> ---
> v2  Change from -mon to -monitor for clarity.
> v3  Change node name from a10_monitor to monitor.
> ---
>  arch/arm/boot/dts/socfpga_arria10_socdk.dtsi | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
> index eb00ae3..996e745 100644
> --- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
> +++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
> @@ -121,6 +121,10 @@
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
> +
> +		monitor {
> +			compatible = "altr,a10sr-monitor";
> +		};
>  	};
>  };
>  
> 

Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>

Re: [PATCHv3 4/4] ARM: socfpga: dts: Add Monitor to A10-SR MFD

[Dinh Nguyen]

On 11/02/2016 09:32 AM, tthayer@opensource.altera.com wrote:
> From: Thor Thayer <tthayer@opensource.altera.com>
> 
> Add the Monitor functionality to the Arria10 DevKit
> System Resource chip.
> 
> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
> ---
> v2  Change from -mon to -monitor for clarity.
> v3  Change node name from a10_monitor to monitor.
> ---
>  arch/arm/boot/dts/socfpga_arria10_socdk.dtsi | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
> index eb00ae3..996e745 100644
> --- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
> +++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
> @@ -121,6 +121,10 @@
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
> +
> +		monitor {
> +			compatible = "altr,a10sr-monitor";
> +		};
>  	};
>  };
>  
> 

Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>