[PATCH v4 0/2] i2c: aspeed: added driver for Aspeed I2C

[PATCH v4 0/2] i2c: aspeed: added driver for Aspeed I2C

[Brendan Higgins]

Sorry, been a while since I was able to send an update for this.

As a refresher, I added a master mode and slave mode I2C driver for the Aspeed
24XX/25XX SoC as well as device binding documentation.

Changes since first update:
  - I have removed the bus device tree param as requested here:
    http://www.spinics.net/lists/devicetree/msg143850.html
  - I2C adapter number is now generated dynamically unless an alias is provided
  - I changed the Kconfig for the driver to depend only on ARCH_ASPEED
  - Replaced the two module_platform_driver registrations with single
    module_init

Changes have been tested on the Aspeed evaluation board.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 0/2] i2c: aspeed: added driver for Aspeed I2C

[Brendan Higgins]

Sorry, been a while since I was able to send an update for this.

As a refresher, I added a master mode and slave mode I2C driver for the Aspeed
24XX/25XX SoC as well as device binding documentation.

Changes since first update:
  - I have removed the bus device tree param as requested here:
    http://www.spinics.net/lists/devicetree/msg143850.html
  - I2C adapter number is now generated dynamically unless an alias is provided
  - I changed the Kconfig for the driver to depend only on ARCH_ASPEED
  - Replaced the two module_platform_driver registrations with single
    module_init

Changes have been tested on the Aspeed evaluation board.

[PATCH v4 1/2] i2c: aspeed: added driver for Aspeed I2C

[Brendan Higgins]

Added initial master and slave support for Aspeed I2C controller.
Supports fourteen busses present in ast24xx and ast25xx BMC SoCs by
Aspeed.

Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
---
Changes for v2:
  - Added single module_init (multiple was breaking some builds).
Changes for v3:
  - Removed "bus" device tree param; now extracted from bus address offset
Changes for v4:
  - I2C adapter number is now generated dynamically unless specified in alias.
---
 drivers/i2c/busses/Kconfig      |  10 +
 drivers/i2c/busses/Makefile     |   1 +
 drivers/i2c/busses/i2c-aspeed.c | 807 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 818 insertions(+)
 create mode 100644 drivers/i2c/busses/i2c-aspeed.c

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index d252276..b6caa5d 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -1009,6 +1009,16 @@ config I2C_RCAR
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-rcar.
 
+config I2C_ASPEED
+	tristate "Aspeed AST2xxx SoC I2C Controller"
+	depends on ARCH_ASPEED
+	help
+	  If you say yes to this option, support will be included for the
+	  Aspeed AST2xxx SoC I2C controller.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-aspeed.
+
 comment "External I2C/SMBus adapter drivers"
 
 config I2C_DIOLAN_U2C
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 29764cc..826e780 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -99,6 +99,7 @@ obj-$(CONFIG_I2C_XILINX)	+= i2c-xiic.o
 obj-$(CONFIG_I2C_XLR)		+= i2c-xlr.o
 obj-$(CONFIG_I2C_XLP9XX)	+= i2c-xlp9xx.o
 obj-$(CONFIG_I2C_RCAR)		+= i2c-rcar.o
+obj-$(CONFIG_I2C_ASPEED)	+= i2c-aspeed.o
 
 # External I2C/SMBus adapter drivers
 obj-$(CONFIG_I2C_DIOLAN_U2C)	+= i2c-diolan-u2c.o
diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
new file mode 100644
index 0000000..88e078a
--- /dev/null
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -0,0 +1,807 @@
+/*
+ *  I2C adapter for the ASPEED I2C bus.
+ *
+ *  Copyright (C) 2012-2020  ASPEED Technology Inc.
+ *  Copyright 2016 IBM Corporation
+ *  Copyright 2016 Google, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/completion.h>
+#include <linux/slab.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+/* I2C Register */
+#define ASPEED_I2C_FUN_CTRL_REG				0x00
+#define ASPEED_I2C_AC_TIMING_REG1			0x04
+#define ASPEED_I2C_AC_TIMING_REG2			0x08
+#define ASPEED_I2C_INTR_CTRL_REG			0x0c
+#define ASPEED_I2C_INTR_STS_REG				0x10
+#define ASPEED_I2C_CMD_REG				0x14
+#define ASPEED_I2C_DEV_ADDR_REG				0x18
+#define ASPEED_I2C_BYTE_BUF_REG				0x20
+#define ASPEED_I2C_OFFSET_START				0x40
+#define ASPEED_I2C_OFFSET_INCREMENT			0x40
+
+#define ASPEED_I2C_NUM_BUS 14
+
+/* Global Register Definition */
+/* 0x00 : I2C Interrupt Status Register  */
+/* 0x08 : I2C Interrupt Target Assignment  */
+
+/* Device Register Definition */
+/* 0x00 : I2CD Function Control Register  */
+#define ASPEED_I2CD_MULTI_MASTER_DIS			BIT(15)
+#define ASPEED_I2CD_SDA_DRIVE_1T_EN			BIT(8)
+#define ASPEED_I2CD_M_SDA_DRIVE_1T_EN			BIT(7)
+#define ASPEED_I2CD_M_HIGH_SPEED_EN			BIT(6)
+#define ASPEED_I2CD_SLAVE_EN				BIT(1)
+#define ASPEED_I2CD_MASTER_EN				BIT(0)
+
+/* 0x08 : I2CD Clock and AC Timing Control Register #2 */
+#define ASPEED_NO_TIMEOUT_CTRL				0
+
+
+/* 0x0c : I2CD Interrupt Control Register &
+ * 0x10 : I2CD Interrupt Status Register
+ *
+ * These share bit definitions, so use the same values for the enable &
+ * status bits.
+ */
+#define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT			BIT(14)
+#define ASPEED_I2CD_INTR_BUS_RECOVER_DONE		BIT(13)
+#define ASPEED_I2CD_INTR_SLAVE_MATCH			BIT(7)
+#define ASPEED_I2CD_INTR_SCL_TIMEOUT			BIT(6)
+#define ASPEED_I2CD_INTR_ABNORMAL			BIT(5)
+#define ASPEED_I2CD_INTR_NORMAL_STOP			BIT(4)
+#define ASPEED_I2CD_INTR_ARBIT_LOSS			BIT(3)
+#define ASPEED_I2CD_INTR_RX_DONE			BIT(2)
+#define ASPEED_I2CD_INTR_TX_NAK				BIT(1)
+#define ASPEED_I2CD_INTR_TX_ACK				BIT(0)
+
+/* 0x14 : I2CD Command/Status Register   */
+#define ASPEED_I2CD_SCL_LINE_STS			BIT(18)
+#define ASPEED_I2CD_SDA_LINE_STS			BIT(17)
+#define ASPEED_I2CD_BUS_BUSY_STS			BIT(16)
+#define ASPEED_I2CD_BUS_RECOVER_CMD			BIT(11)
+
+/* Command Bit */
+#define ASPEED_I2CD_M_STOP_CMD				BIT(5)
+#define ASPEED_I2CD_M_S_RX_CMD_LAST			BIT(4)
+#define ASPEED_I2CD_M_RX_CMD				BIT(3)
+#define ASPEED_I2CD_S_TX_CMD				BIT(2)
+#define ASPEED_I2CD_M_TX_CMD				BIT(1)
+#define ASPEED_I2CD_M_START_CMD				BIT(0)
+
+/* 0x18 : I2CD Slave Device Address Register   */
+#define ASPEED_I2CD_DEV_ADDR_MASK			GENMASK(6, 0)
+
+enum aspeed_i2c_slave_state {
+	ASPEED_I2C_SLAVE_START,
+	ASPEED_I2C_SLAVE_READ_REQUESTED,
+	ASPEED_I2C_SLAVE_READ_PROCESSED,
+	ASPEED_I2C_SLAVE_WRITE_REQUESTED,
+	ASPEED_I2C_SLAVE_WRITE_RECEIVED,
+	ASPEED_I2C_SLAVE_STOP,
+};
+
+struct aspeed_i2c_bus {
+	struct i2c_adapter		adap;
+	struct device			*dev;
+	void __iomem			*base;
+	spinlock_t			lock;
+	struct completion		cmd_complete;
+	int				irq;
+	/* Transaction state. */
+	struct i2c_msg			*msg;
+	int				msg_pos;
+	u32				cmd_err;
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	struct i2c_client		*slave;
+	enum aspeed_i2c_slave_state	slave_state;
+#endif
+};
+
+struct aspeed_i2c_controller {
+	struct device		*dev;
+	void __iomem		*base;
+	int			irq;
+	struct irq_domain	*irq_domain;
+};
+
+static inline void aspeed_i2c_write(struct aspeed_i2c_bus *bus, u32 val,
+				    u32 reg)
+{
+	writel(val, bus->base + reg);
+}
+
+static inline u32 aspeed_i2c_read(struct aspeed_i2c_bus *bus, u32 reg)
+{
+	return readl(bus->base + reg);
+}
+
+static u8 aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus)
+{
+	u32 command;
+	unsigned long time_left;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&bus->lock, flags);
+	command = aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG);
+	/* Bus is idle: no recovery needed. */
+	if ((command & ASPEED_I2CD_SDA_LINE_STS) &&
+	    (command & ASPEED_I2CD_SCL_LINE_STS))
+		goto out;
+
+	dev_dbg(bus->dev, "bus hung (state %x), attempting recovery\n",
+		command);
+
+	/* Bus held: put bus in stop state. */
+	if ((command & ASPEED_I2CD_SDA_LINE_STS) &&
+	    !(command & ASPEED_I2CD_SCL_LINE_STS)) {
+		aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD,
+				 ASPEED_I2C_CMD_REG);
+		reinit_completion(&bus->cmd_complete);
+		spin_unlock_irqrestore(&bus->lock, flags);
+
+		time_left = wait_for_completion_interruptible_timeout(
+				&bus->cmd_complete, bus->adap.timeout * HZ);
+
+		spin_lock_irqsave(&bus->lock, flags);
+		if (time_left == 0)
+			ret = -ETIMEDOUT;
+		else if (bus->cmd_err)
+			ret = -EIO;
+	/* Bus error. */
+	} else if (!(command & ASPEED_I2CD_SDA_LINE_STS)) {
+		aspeed_i2c_write(bus, ASPEED_I2CD_BUS_RECOVER_CMD,
+				 ASPEED_I2C_CMD_REG);
+		reinit_completion(&bus->cmd_complete);
+		spin_unlock_irqrestore(&bus->lock, flags);
+
+		time_left = wait_for_completion_interruptible_timeout(
+				&bus->cmd_complete, bus->adap.timeout * HZ);
+
+		spin_lock_irqsave(&bus->lock, flags);
+		if (time_left == 0)
+			ret = -ETIMEDOUT;
+		else if (bus->cmd_err)
+			ret = -EIO;
+		/* Recovery failed. */
+		else if (!(aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG) &
+			   ASPEED_I2CD_SDA_LINE_STS))
+			ret = -EIO;
+	}
+
+out:
+	spin_unlock_irqrestore(&bus->lock, flags);
+	return ret;
+}
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
+{
+	bool irq_handled = true;
+	u32 command;
+	u32 irq_status;
+	u32 status_ack = 0;
+	u8 value;
+	struct i2c_client *slave = bus->slave;
+
+	spin_lock(&bus->lock);
+	if (!slave) {
+		irq_handled = false;
+		goto out;
+	}
+	command = aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG);
+	irq_status = aspeed_i2c_read(bus, ASPEED_I2C_INTR_STS_REG);
+
+	/* Slave was requested, restart state machine. */
+	if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) {
+		status_ack |= ASPEED_I2CD_INTR_SLAVE_MATCH;
+		bus->slave_state = ASPEED_I2C_SLAVE_START;
+	}
+	/* Slave is not currently active, irq was for someone else. */
+	if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
+		irq_handled = false;
+		goto out;
+	}
+
+	dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n",
+		irq_status, command);
+
+	/* Slave was sent something. */
+	if (irq_status & ASPEED_I2CD_INTR_RX_DONE) {
+		value = aspeed_i2c_read(bus, ASPEED_I2C_BYTE_BUF_REG) >> 8;
+		/* Handle address frame. */
+		if (bus->slave_state == ASPEED_I2C_SLAVE_START) {
+			if (value & 0x1)
+				bus->slave_state =
+						ASPEED_I2C_SLAVE_READ_REQUESTED;
+			else
+				bus->slave_state =
+						ASPEED_I2C_SLAVE_WRITE_REQUESTED;
+		}
+		status_ack |= ASPEED_I2CD_INTR_RX_DONE;
+	}
+
+	/* Slave was asked to stop. */
+	if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
+		status_ack |= ASPEED_I2CD_INTR_NORMAL_STOP;
+		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
+	}
+	if (irq_status & ASPEED_I2CD_INTR_TX_NAK) {
+		status_ack |= ASPEED_I2CD_INTR_TX_NAK;
+		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
+	}
+
+	if (bus->slave_state == ASPEED_I2C_SLAVE_READ_REQUESTED) {
+		if (irq_status & ASPEED_I2CD_INTR_TX_ACK)
+			dev_err(bus->dev, "Unexpected ACK on read request.\n");
+		bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED;
+
+		i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
+		aspeed_i2c_write(bus, value, ASPEED_I2C_BYTE_BUF_REG);
+		aspeed_i2c_write(bus, ASPEED_I2CD_S_TX_CMD, ASPEED_I2C_CMD_REG);
+	} else if (bus->slave_state == ASPEED_I2C_SLAVE_READ_PROCESSED) {
+		status_ack |= ASPEED_I2CD_INTR_TX_ACK;
+		if (!(irq_status & ASPEED_I2CD_INTR_TX_ACK))
+			dev_err(bus->dev,
+				"Expected ACK after processed read.\n");
+		i2c_slave_event(slave, I2C_SLAVE_READ_PROCESSED, &value);
+		aspeed_i2c_write(bus, value, ASPEED_I2C_BYTE_BUF_REG);
+		aspeed_i2c_write(bus, ASPEED_I2CD_S_TX_CMD, ASPEED_I2C_CMD_REG);
+	} else if (bus->slave_state == ASPEED_I2C_SLAVE_WRITE_REQUESTED) {
+		bus->slave_state = ASPEED_I2C_SLAVE_WRITE_RECEIVED;
+		i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
+	} else if (bus->slave_state == ASPEED_I2C_SLAVE_WRITE_RECEIVED) {
+		i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value);
+	} else if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
+		i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
+	}
+
+	if (status_ack != irq_status)
+		dev_err(bus->dev,
+			"irq handled != irq. expected %x, but was %x\n",
+			irq_status, status_ack);
+	aspeed_i2c_write(bus, status_ack, ASPEED_I2C_INTR_STS_REG);
+
+out:
+	spin_unlock(&bus->lock);
+	return irq_handled;
+}
+#endif
+
+static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
+{
+	const u32 errs = ASPEED_I2CD_INTR_ARBIT_LOSS |
+		ASPEED_I2CD_INTR_ABNORMAL |
+		ASPEED_I2CD_INTR_SCL_TIMEOUT |
+		ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |
+		ASPEED_I2CD_INTR_TX_NAK;
+	u32 irq_status;
+
+	spin_lock(&bus->lock);
+	irq_status = aspeed_i2c_read(bus, ASPEED_I2C_INTR_STS_REG);
+	bus->cmd_err = irq_status & errs;
+
+	dev_dbg(bus->dev, "master irq status 0x%08x\n", irq_status);
+
+	/* No message to transfer. */
+	if (bus->cmd_err ||
+	    (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) ||
+	    (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE)) {
+		complete(&bus->cmd_complete);
+		goto out;
+	} else if (!bus->msg || bus->msg_pos >= bus->msg->len)
+		goto out;
+
+	if ((bus->msg->flags & I2C_M_RD) &&
+	    (irq_status & ASPEED_I2CD_INTR_RX_DONE)) {
+		bus->msg->buf[bus->msg_pos++] = aspeed_i2c_read(
+				bus, ASPEED_I2C_BYTE_BUF_REG) >> 8;
+		if (bus->msg_pos + 1 < bus->msg->len)
+			aspeed_i2c_write(bus, ASPEED_I2CD_M_RX_CMD,
+					 ASPEED_I2C_CMD_REG);
+		else if (bus->msg_pos < bus->msg->len)
+			aspeed_i2c_write(bus, ASPEED_I2CD_M_RX_CMD |
+				      ASPEED_I2CD_M_S_RX_CMD_LAST,
+				      ASPEED_I2C_CMD_REG);
+	} else if (!(bus->msg->flags & I2C_M_RD) &&
+		   (irq_status & ASPEED_I2CD_INTR_TX_ACK)) {
+		aspeed_i2c_write(bus, bus->msg->buf[bus->msg_pos++],
+			      ASPEED_I2C_BYTE_BUF_REG);
+		aspeed_i2c_write(bus, ASPEED_I2CD_M_TX_CMD, ASPEED_I2C_CMD_REG);
+	}
+
+	/* Transmission complete: notify caller. */
+	if (bus->msg_pos >= bus->msg->len)
+		complete(&bus->cmd_complete);
+out:
+	aspeed_i2c_write(bus, irq_status, ASPEED_I2C_INTR_STS_REG);
+	spin_unlock(&bus->lock);
+	return true;
+}
+
+static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
+{
+	struct aspeed_i2c_bus *bus = dev_id;
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	if (aspeed_i2c_slave_irq(bus)) {
+		dev_dbg(bus->dev, "irq handled by slave.\n");
+		return IRQ_HANDLED;
+	}
+#endif
+	if (aspeed_i2c_master_irq(bus)) {
+		dev_dbg(bus->dev, "irq handled by master.\n");
+		return IRQ_HANDLED;
+	}
+	dev_err(bus->dev, "irq not handled properly!\n");
+	return IRQ_HANDLED;
+}
+
+static int aspeed_i2c_master_single_xfer(struct i2c_adapter *adap,
+				      struct i2c_msg *msg)
+{
+	struct aspeed_i2c_bus *bus = adap->algo_data;
+	unsigned long flags;
+	u8 slave_addr;
+	u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD;
+	int ret = msg->len;
+	unsigned long time_left;
+
+	spin_lock_irqsave(&bus->lock, flags);
+	bus->msg = msg;
+	bus->msg_pos = 0;
+	slave_addr = msg->addr << 1;
+	if (msg->flags & I2C_M_RD) {
+		slave_addr |= 1;
+		command |= ASPEED_I2CD_M_RX_CMD;
+		if (msg->len == 1)
+			command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
+	}
+	aspeed_i2c_write(bus, slave_addr, ASPEED_I2C_BYTE_BUF_REG);
+	aspeed_i2c_write(bus, command, ASPEED_I2C_CMD_REG);
+	reinit_completion(&bus->cmd_complete);
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	time_left = wait_for_completion_interruptible_timeout(
+			&bus->cmd_complete, bus->adap.timeout * HZ * msg->len);
+	if (time_left == 0)
+		return -ETIMEDOUT;
+
+	spin_lock_irqsave(&bus->lock, flags);
+	if (bus->cmd_err)
+		ret = -EIO;
+	bus->msg = NULL;
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	return ret;
+}
+
+static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
+				  struct i2c_msg *msgs, int num)
+{
+	struct aspeed_i2c_bus *bus = adap->algo_data;
+	int ret;
+	int i;
+	unsigned long flags;
+	unsigned long time_left;
+
+	/* If bus is busy, attempt recovery. We assume a single master
+	 * environment.
+	 */
+	if (aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG) &
+	    ASPEED_I2CD_BUS_BUSY_STS) {
+		ret = aspeed_i2c_recover_bus(bus);
+		if (ret)
+			return ret;
+	}
+
+	for (i = 0; i < num; i++) {
+		ret = aspeed_i2c_master_single_xfer(adap, &msgs[i]);
+		if (ret < 0)
+			break;
+		/* TODO: Support other forms of I2C protocol mangling. */
+		if (msgs[i].flags & I2C_M_STOP) {
+			spin_lock_irqsave(&bus->lock, flags);
+			aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD,
+				      ASPEED_I2C_CMD_REG);
+			reinit_completion(&bus->cmd_complete);
+			spin_unlock_irqrestore(&bus->lock, flags);
+
+			time_left = wait_for_completion_interruptible_timeout(
+					&bus->cmd_complete,
+					bus->adap.timeout * HZ);
+			if (time_left == 0)
+				return -ETIMEDOUT;
+		}
+	}
+
+	spin_lock_irqsave(&bus->lock, flags);
+	aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD, ASPEED_I2C_CMD_REG);
+	reinit_completion(&bus->cmd_complete);
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	time_left = wait_for_completion_interruptible_timeout(
+			&bus->cmd_complete, bus->adap.timeout * HZ);
+	if (time_left == 0)
+		return -ETIMEDOUT;
+
+	/* If nothing went wrong, return number of messages transferred. */
+	if (ret < 0)
+		return ret;
+	else
+		return i;
+}
+
+static u32 aspeed_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+static int aspeed_i2c_reg_slave(struct i2c_client *client)
+{
+	struct aspeed_i2c_bus *bus;
+	unsigned long flags;
+	u32 addr_reg_val;
+	u32 func_ctrl_reg_val;
+
+	bus = client->adapter->algo_data;
+	spin_lock_irqsave(&bus->lock, flags);
+	if (bus->slave) {
+		spin_unlock_irqrestore(&bus->lock, flags);
+		return -EINVAL;
+	}
+
+	/* Set slave addr. */
+	addr_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_DEV_ADDR_REG);
+	addr_reg_val &= ~ASPEED_I2CD_DEV_ADDR_MASK;
+	addr_reg_val |= client->addr & ASPEED_I2CD_DEV_ADDR_MASK;
+	aspeed_i2c_write(bus, addr_reg_val, ASPEED_I2C_DEV_ADDR_REG);
+
+	/* Switch from master mode to slave mode. */
+	func_ctrl_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG);
+	func_ctrl_reg_val &= ~ASPEED_I2CD_MASTER_EN;
+	func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN;
+	aspeed_i2c_write(bus, func_ctrl_reg_val, ASPEED_I2C_FUN_CTRL_REG);
+
+	bus->slave = client;
+	bus->slave_state = ASPEED_I2C_SLAVE_STOP;
+	spin_unlock_irqrestore(&bus->lock, flags);
+	return 0;
+}
+
+static int aspeed_i2c_unreg_slave(struct i2c_client *client)
+{
+	struct aspeed_i2c_bus *bus = client->adapter->algo_data;
+	unsigned long flags;
+	u32 func_ctrl_reg_val;
+
+	spin_lock_irqsave(&bus->lock, flags);
+	if (!bus->slave) {
+		spin_unlock_irqrestore(&bus->lock, flags);
+		return -EINVAL;
+	}
+
+	/* Switch from slave mode to master mode. */
+	func_ctrl_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG);
+	func_ctrl_reg_val &= ~ASPEED_I2CD_SLAVE_EN;
+	func_ctrl_reg_val |= ASPEED_I2CD_MASTER_EN;
+	aspeed_i2c_write(bus, func_ctrl_reg_val, ASPEED_I2C_FUN_CTRL_REG);
+
+	bus->slave = NULL;
+	spin_unlock_irqrestore(&bus->lock, flags);
+	return 0;
+}
+#endif
+
+static const struct i2c_algorithm aspeed_i2c_algo = {
+	.master_xfer	= aspeed_i2c_master_xfer,
+	.functionality	= aspeed_i2c_functionality,
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	.reg_slave	= aspeed_i2c_reg_slave,
+	.unreg_slave	= aspeed_i2c_unreg_slave,
+#endif
+};
+
+static u32 aspeed_i2c_get_clk_reg_val(u32 divider_ratio)
+{
+	unsigned int inc = 0, div;
+	u32 scl_low, scl_high, data;
+
+	for (div = 0; divider_ratio >= 16; div++) {
+		inc |= (divider_ratio & 1);
+		divider_ratio >>= 1;
+	}
+	divider_ratio += inc;
+	scl_low = (divider_ratio >> 1) - 1;
+	scl_high = divider_ratio - scl_low - 2;
+	data = 0x77700300 | (scl_high << 16) | (scl_low << 12) | div;
+	return data;
+}
+
+static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus,
+			    struct platform_device *pdev)
+{
+	struct clk *pclk;
+	u32 clk_freq;
+	u32 divider_ratio;
+	int ret;
+
+	pclk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pclk)) {
+		dev_err(&pdev->dev, "clk_get failed\n");
+		return PTR_ERR(pclk);
+	}
+	ret = of_property_read_u32(pdev->dev.of_node,
+			"clock-frequency", &clk_freq);
+	if (ret < 0) {
+		dev_err(&pdev->dev,
+				"Could not read clock-frequency property\n");
+		clk_freq = 100000;
+	}
+	divider_ratio = clk_get_rate(pclk) / clk_freq;
+	/* We just need the clock rate, we don't actually use the clk object. */
+	devm_clk_put(&pdev->dev, pclk);
+
+	/* Set AC Timing */
+	if (clk_freq / 1000 > 400) {
+		aspeed_i2c_write(bus, aspeed_i2c_read(bus,
+						      ASPEED_I2C_FUN_CTRL_REG) |
+				ASPEED_I2CD_M_HIGH_SPEED_EN |
+				ASPEED_I2CD_M_SDA_DRIVE_1T_EN |
+				ASPEED_I2CD_SDA_DRIVE_1T_EN,
+				ASPEED_I2C_FUN_CTRL_REG);
+
+		aspeed_i2c_write(bus, 0x3, ASPEED_I2C_AC_TIMING_REG2);
+		aspeed_i2c_write(bus, aspeed_i2c_get_clk_reg_val(divider_ratio),
+			      ASPEED_I2C_AC_TIMING_REG1);
+	} else {
+		aspeed_i2c_write(bus, aspeed_i2c_get_clk_reg_val(divider_ratio),
+			      ASPEED_I2C_AC_TIMING_REG1);
+		aspeed_i2c_write(bus, ASPEED_NO_TIMEOUT_CTRL,
+				 ASPEED_I2C_AC_TIMING_REG2);
+	}
+
+	return 0;
+}
+
+static void noop(struct irq_data *data) { }
+
+static struct irq_chip aspeed_i2c_irqchip = {
+	.name		= "ast-i2c",
+	.irq_unmask	= noop,
+	.irq_mask	= noop,
+};
+
+static int aspeed_i2c_probe_bus(struct platform_device *pdev)
+{
+	struct aspeed_i2c_bus *bus;
+	struct aspeed_i2c_controller *controller =
+			dev_get_drvdata(pdev->dev.parent);
+	struct resource *res;
+	int ret, irq;
+	u32 hwirq;
+
+	bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
+	if (!bus)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	bus->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(bus->base))
+		return PTR_ERR(bus->base);
+
+	bus->irq = platform_get_irq(pdev, 0);
+	if (bus->irq < 0)
+		return -ENXIO;
+	ret = of_property_read_u32(pdev->dev.of_node, "interrupts", &hwirq);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "no I2C 'interrupts' property\n");
+		return -ENXIO;
+	}
+	irq = irq_create_mapping(controller->irq_domain, hwirq);
+	irq_set_chip_data(irq, controller);
+	irq_set_chip_and_handler(irq, &aspeed_i2c_irqchip, handle_simple_irq);
+	ret = devm_request_irq(&pdev->dev, bus->irq, aspeed_i2c_bus_irq,
+			0, dev_name(&pdev->dev), bus);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to request interrupt\n");
+		return -ENXIO;
+	}
+
+	/* Initialize the I2C adapter */
+	spin_lock_init(&bus->lock);
+	init_completion(&bus->cmd_complete);
+	bus->adap.owner = THIS_MODULE;
+	bus->adap.retries = 0;
+	bus->adap.timeout = 5;
+	bus->adap.algo = &aspeed_i2c_algo;
+	bus->adap.algo_data = bus;
+	bus->adap.dev.parent = &pdev->dev;
+	bus->adap.dev.of_node = pdev->dev.of_node;
+	snprintf(bus->adap.name, sizeof(bus->adap.name), "Aspeed i2c");
+
+	bus->dev = &pdev->dev;
+
+	/* reset device: disable master & slave functions */
+	aspeed_i2c_write(bus, 0, ASPEED_I2C_FUN_CTRL_REG);
+
+	ret = aspeed_i2c_init_clk(bus, pdev);
+	if (ret < 0)
+		return ret;
+
+	/* Enable Master Mode */
+	aspeed_i2c_write(bus, aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG) |
+		      ASPEED_I2CD_MASTER_EN |
+		      ASPEED_I2CD_MULTI_MASTER_DIS, ASPEED_I2C_FUN_CTRL_REG);
+
+	/* Set interrupt generation of I2C controller */
+	aspeed_i2c_write(bus, ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |
+			ASPEED_I2CD_INTR_BUS_RECOVER_DONE |
+			ASPEED_I2CD_INTR_SCL_TIMEOUT |
+			ASPEED_I2CD_INTR_ABNORMAL |
+			ASPEED_I2CD_INTR_NORMAL_STOP |
+			ASPEED_I2CD_INTR_ARBIT_LOSS |
+			ASPEED_I2CD_INTR_RX_DONE |
+			ASPEED_I2CD_INTR_TX_NAK |
+			ASPEED_I2CD_INTR_TX_ACK,
+			ASPEED_I2C_INTR_CTRL_REG);
+
+	ret = i2c_add_adapter(&bus->adap);
+	if (ret < 0)
+		return -ENXIO;
+
+	platform_set_drvdata(pdev, bus);
+
+	dev_info(bus->dev, "i2c bus %d registered, irq %d\n",
+			bus->adap.nr, bus->irq);
+
+	return 0;
+}
+
+static int aspeed_i2c_remove_bus(struct platform_device *pdev)
+{
+	struct aspeed_i2c_bus *bus = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&bus->adap);
+	return 0;
+}
+
+static const struct of_device_id aspeed_i2c_bus_of_table[] = {
+	{ .compatible = "aspeed,ast2400-i2c-bus", },
+	{ .compatible = "aspeed,ast2500-i2c-bus", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table);
+
+static struct platform_driver aspeed_i2c_bus_driver = {
+	.probe		= aspeed_i2c_probe_bus,
+	.remove		= aspeed_i2c_remove_bus,
+	.driver		= {
+		.name		= "ast-i2c-bus",
+		.of_match_table	= aspeed_i2c_bus_of_table,
+	},
+};
+
+static void aspeed_i2c_controller_irq(struct irq_desc *desc)
+{
+	struct aspeed_i2c_controller *c = irq_desc_get_handler_data(desc);
+	unsigned long p, status;
+	unsigned int bus_irq;
+
+	status = readl(c->base);
+	for_each_set_bit(p, &status, ASPEED_I2C_NUM_BUS) {
+		bus_irq = irq_find_mapping(c->irq_domain, p);
+		generic_handle_irq(bus_irq);
+	}
+}
+
+static int aspeed_i2c_probe_controller(struct platform_device *pdev)
+{
+	struct aspeed_i2c_controller *controller;
+	struct device_node *np;
+	struct resource *res;
+
+	controller = kzalloc(sizeof(*controller), GFP_KERNEL);
+	if (!controller)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	controller->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(controller->base))
+		return PTR_ERR(controller->base);
+
+	controller->irq = platform_get_irq(pdev, 0);
+	if (controller->irq < 0)
+		return -ENXIO;
+
+	controller->irq_domain = irq_domain_add_linear(pdev->dev.of_node,
+			ASPEED_I2C_NUM_BUS, &irq_domain_simple_ops, NULL);
+	if (!controller->irq_domain)
+		return -ENXIO;
+	controller->irq_domain->name = "ast-i2c-domain";
+
+	irq_set_chained_handler_and_data(controller->irq,
+			aspeed_i2c_controller_irq, controller);
+
+	controller->dev = &pdev->dev;
+
+	platform_set_drvdata(pdev, controller);
+
+	dev_info(controller->dev, "i2c controller registered, irq %d\n",
+			controller->irq);
+
+	for_each_child_of_node(pdev->dev.of_node, np) {
+		of_platform_device_create(np, NULL, &pdev->dev);
+		of_node_put(np);
+	}
+
+	return 0;
+}
+
+static int aspeed_i2c_remove_controller(struct platform_device *pdev)
+{
+	struct aspeed_i2c_controller *controller = platform_get_drvdata(pdev);
+
+	irq_domain_remove(controller->irq_domain);
+	return 0;
+}
+
+static const struct of_device_id aspeed_i2c_controller_of_table[] = {
+	{ .compatible = "aspeed,ast2400-i2c-controller", },
+	{ .compatible = "aspeed,ast2500-i2c-controller", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, aspeed_i2c_controller_of_table);
+
+static struct platform_driver aspeed_i2c_controller_driver = {
+	.probe		= aspeed_i2c_probe_controller,
+	.remove		= aspeed_i2c_remove_controller,
+	.driver		= {
+		.name		= "ast-i2c-controller",
+		.of_match_table	= aspeed_i2c_controller_of_table,
+	},
+};
+
+static int __init aspeed_i2c_driver_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&aspeed_i2c_controller_driver);
+	if (ret < 0)
+		return ret;
+	return platform_driver_register(&aspeed_i2c_bus_driver);
+}
+module_init(aspeed_i2c_driver_init);
+
+static void __exit aspeed_i2c_driver_exit(void)
+{
+	platform_driver_unregister(&aspeed_i2c_bus_driver);
+	platform_driver_unregister(&aspeed_i2c_controller_driver);
+}
+module_exit(aspeed_i2c_driver_exit);
+
+MODULE_AUTHOR("Brendan Higgins <brendanhiggins@google.com>");
+MODULE_DESCRIPTION("Aspeed I2C Bus Driver");
+MODULE_LICENSE("GPL");
-- 
2.8.0.rc3.226.g39d4020

[PATCH v4 2/2] i2c: aspeed: added documentation for Aspeed I2C driver

[Brendan Higgins]

Added device tree binding documentation for Aspeed I2C controller and
busses.

Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
---
Changes for v2:
  - None
Changes for v3:
  - Removed reference to "bus" device tree param
Changes for v4:
  - None
---
 .../devicetree/bindings/i2c/i2c-aspeed.txt         | 61 ++++++++++++++++++++++
 1 file changed, 61 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt

diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
new file mode 100644
index 0000000..dd11a97
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
@@ -0,0 +1,61 @@
+Device tree configuration for the I2C controller and busses on the AST24XX
+and AST25XX SoCs.
+
+Controller:
+
+	Required Properties:
+	- #address-cells	: should be 1
+	- #size-cells 		: should be 1
+	- #interrupt-cells 	: should be 1
+	- compatible 		: should be "aspeed,ast2400-i2c-controller"
+				  or "aspeed,ast2500-i2c-controller"
+	- reg			: address start and range of controller
+	- ranges		: defines address offset and range for busses
+	- interrupts		: interrupt number
+	- clocks		: root clock of bus, should reference the APB
+				  clock
+	- clock-ranges		: specifies that child busses can inherit clocks
+	- interrupt-controller	: denotes that the controller receives and fires
+				  new interrupts for child busses
+
+Bus:
+
+	Required Properties:
+	- #address-cells	: should be 1
+	- #size-cells		: should be 0
+	- reg			: address offset and range of bus
+	- compatible		: should be "aspeed,ast2400-i2c-bus"
+				  or "aspeed,ast2500-i2c-bus"
+	- interrupts		: interrupt number
+
+	Optional Properties:
+	- clock-frequency	: frequency of the bus clock in Hz
+				  defaults to 100 kHz when not specified
+
+Example:
+
+i2c: i2c@1e78a000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	#interrupt-cells = <1>;
+
+	compatible = "aspeed,ast2400-i2c-controller";
+	reg = <0x1e78a000 0x40>;
+	ranges = <0 0x1e78a000 0x1000>;
+	interrupts = <12>;
+	clocks = <&clk_apb>;
+	clock-ranges;
+	interrupt-controller;
+
+	i2c0: i2c-bus@40 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x40 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clock-frequency = <100000>;
+		status = "disabled";
+		interrupts = <0>;
+		interrupt-parent = <&i2c>;
+	};
+};
+
-- 
2.8.0.rc3.226.g39d4020

Re: [PATCH v4 2/2] i2c: aspeed: added documentation for Aspeed I2C driver

[Rob Herring]

On Fri, Nov 04, 2016 at 06:58:19PM -0700, Brendan Higgins wrote:
> Added device tree binding documentation for Aspeed I2C controller and
> busses.
> 
> Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
> ---
> Changes for v2:
>   - None
> Changes for v3:
>   - Removed reference to "bus" device tree param
> Changes for v4:
>   - None
> ---
>  .../devicetree/bindings/i2c/i2c-aspeed.txt         | 61 ++++++++++++++++++++++
>  1 file changed, 61 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v4 2/2] i2c: aspeed: added documentation for Aspeed I2C driver

[Joel Stanley]

On Tue, Nov 15, 2016 at 2:27 AM, Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:
> On Fri, Nov 04, 2016 at 06:58:19PM -0700, Brendan Higgins wrote:
>> Added device tree binding documentation for Aspeed I2C controller and
>> busses.
>>
>> Signed-off-by: Brendan Higgins <brendanhiggins-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
>> ---
>> Changes for v2:
>>   - None
>> Changes for v3:
>>   - Removed reference to "bus" device tree param
>> Changes for v4:
>>   - None
>> ---
>>  .../devicetree/bindings/i2c/i2c-aspeed.txt         | 61 ++++++++++++++++++++++
>>  1 file changed, 61 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
>
> Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

Thanks Rob.

Acked-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>

Cheers,

Joel
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v4 2/2] i2c: aspeed: added documentation for Aspeed I2C driver

[Joel Stanley]

On Tue, Nov 15, 2016 at 2:27 AM, Rob Herring <robh@kernel.org> wrote:
> On Fri, Nov 04, 2016 at 06:58:19PM -0700, Brendan Higgins wrote:
>> Added device tree binding documentation for Aspeed I2C controller and
>> busses.
>>
>> Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
>> ---
>> Changes for v2:
>>   - None
>> Changes for v3:
>>   - Removed reference to "bus" device tree param
>> Changes for v4:
>>   - None
>> ---
>>  .../devicetree/bindings/i2c/i2c-aspeed.txt         | 61 ++++++++++++++++++++++
>>  1 file changed, 61 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
>
> Acked-by: Rob Herring <robh@kernel.org>

Thanks Rob.

Acked-by: Joel Stanley <joel@jms.id.au>

Cheers,

Joel

Re: [PATCH v4 1/2] i2c: aspeed: added driver for Aspeed I2C

[Joel Stanley]

On Sat, Nov 5, 2016 at 12:28 PM, Brendan Higgins
<brendanhiggins@google.com> wrote:
> Added initial master and slave support for Aspeed I2C controller.
> Supports fourteen busses present in ast24xx and ast25xx BMC SoCs by
> Aspeed.
>
> Signed-off-by: Brendan Higgins <brendanhiggins@google.com>

I've tested this on an OpenPower Palmetto BMC system and on the Qemu
machine for the same board.

Reviewed-by: Joel Stanley <joel@jms.id.au>

Cheers,

Joel

> ---
> Changes for v2:
>   - Added single module_init (multiple was breaking some builds).
> Changes for v3:
>   - Removed "bus" device tree param; now extracted from bus address offset
> Changes for v4:
>   - I2C adapter number is now generated dynamically unless specified in alias.
> ---
>  drivers/i2c/busses/Kconfig      |  10 +
>  drivers/i2c/busses/Makefile     |   1 +
>  drivers/i2c/busses/i2c-aspeed.c | 807 ++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 818 insertions(+)
>  create mode 100644 drivers/i2c/busses/i2c-aspeed.c
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index d252276..b6caa5d 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -1009,6 +1009,16 @@ config I2C_RCAR
>           This driver can also be built as a module.  If so, the module
>           will be called i2c-rcar.
>
> +config I2C_ASPEED
> +       tristate "Aspeed AST2xxx SoC I2C Controller"
> +       depends on ARCH_ASPEED
> +       help
> +         If you say yes to this option, support will be included for the
> +         Aspeed AST2xxx SoC I2C controller.
> +
> +         This driver can also be built as a module.  If so, the module
> +         will be called i2c-aspeed.
> +
>  comment "External I2C/SMBus adapter drivers"
>
>  config I2C_DIOLAN_U2C
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index 29764cc..826e780 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -99,6 +99,7 @@ obj-$(CONFIG_I2C_XILINX)      += i2c-xiic.o
>  obj-$(CONFIG_I2C_XLR)          += i2c-xlr.o
>  obj-$(CONFIG_I2C_XLP9XX)       += i2c-xlp9xx.o
>  obj-$(CONFIG_I2C_RCAR)         += i2c-rcar.o
> +obj-$(CONFIG_I2C_ASPEED)       += i2c-aspeed.o
>
>  # External I2C/SMBus adapter drivers
>  obj-$(CONFIG_I2C_DIOLAN_U2C)   += i2c-diolan-u2c.o
> diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
> new file mode 100644
> index 0000000..88e078a
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-aspeed.c
> @@ -0,0 +1,807 @@
> +/*
> + *  I2C adapter for the ASPEED I2C bus.
> + *
> + *  Copyright (C) 2012-2020  ASPEED Technology Inc.
> + *  Copyright 2016 IBM Corporation
> + *  Copyright 2016 Google, Inc.
> + *
> + *  This program is free software; you can redistribute it and/or modify
> + *  it under the terms of the GNU General Public License version 2 as
> + *  published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/errno.h>
> +#include <linux/interrupt.h>
> +#include <linux/completion.h>
> +#include <linux/slab.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/err.h>
> +#include <linux/clk.h>
> +
> +/* I2C Register */
> +#define ASPEED_I2C_FUN_CTRL_REG                                0x00
> +#define ASPEED_I2C_AC_TIMING_REG1                      0x04
> +#define ASPEED_I2C_AC_TIMING_REG2                      0x08
> +#define ASPEED_I2C_INTR_CTRL_REG                       0x0c
> +#define ASPEED_I2C_INTR_STS_REG                                0x10
> +#define ASPEED_I2C_CMD_REG                             0x14
> +#define ASPEED_I2C_DEV_ADDR_REG                                0x18
> +#define ASPEED_I2C_BYTE_BUF_REG                                0x20
> +#define ASPEED_I2C_OFFSET_START                                0x40
> +#define ASPEED_I2C_OFFSET_INCREMENT                    0x40
> +
> +#define ASPEED_I2C_NUM_BUS 14
> +
> +/* Global Register Definition */
> +/* 0x00 : I2C Interrupt Status Register  */
> +/* 0x08 : I2C Interrupt Target Assignment  */
> +
> +/* Device Register Definition */
> +/* 0x00 : I2CD Function Control Register  */
> +#define ASPEED_I2CD_MULTI_MASTER_DIS                   BIT(15)
> +#define ASPEED_I2CD_SDA_DRIVE_1T_EN                    BIT(8)
> +#define ASPEED_I2CD_M_SDA_DRIVE_1T_EN                  BIT(7)
> +#define ASPEED_I2CD_M_HIGH_SPEED_EN                    BIT(6)
> +#define ASPEED_I2CD_SLAVE_EN                           BIT(1)
> +#define ASPEED_I2CD_MASTER_EN                          BIT(0)
> +
> +/* 0x08 : I2CD Clock and AC Timing Control Register #2 */
> +#define ASPEED_NO_TIMEOUT_CTRL                         0
> +
> +
> +/* 0x0c : I2CD Interrupt Control Register &
> + * 0x10 : I2CD Interrupt Status Register
> + *
> + * These share bit definitions, so use the same values for the enable &
> + * status bits.
> + */
> +#define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT                        BIT(14)
> +#define ASPEED_I2CD_INTR_BUS_RECOVER_DONE              BIT(13)
> +#define ASPEED_I2CD_INTR_SLAVE_MATCH                   BIT(7)
> +#define ASPEED_I2CD_INTR_SCL_TIMEOUT                   BIT(6)
> +#define ASPEED_I2CD_INTR_ABNORMAL                      BIT(5)
> +#define ASPEED_I2CD_INTR_NORMAL_STOP                   BIT(4)
> +#define ASPEED_I2CD_INTR_ARBIT_LOSS                    BIT(3)
> +#define ASPEED_I2CD_INTR_RX_DONE                       BIT(2)
> +#define ASPEED_I2CD_INTR_TX_NAK                                BIT(1)
> +#define ASPEED_I2CD_INTR_TX_ACK                                BIT(0)
> +
> +/* 0x14 : I2CD Command/Status Register   */
> +#define ASPEED_I2CD_SCL_LINE_STS                       BIT(18)
> +#define ASPEED_I2CD_SDA_LINE_STS                       BIT(17)
> +#define ASPEED_I2CD_BUS_BUSY_STS                       BIT(16)
> +#define ASPEED_I2CD_BUS_RECOVER_CMD                    BIT(11)
> +
> +/* Command Bit */
> +#define ASPEED_I2CD_M_STOP_CMD                         BIT(5)
> +#define ASPEED_I2CD_M_S_RX_CMD_LAST                    BIT(4)
> +#define ASPEED_I2CD_M_RX_CMD                           BIT(3)
> +#define ASPEED_I2CD_S_TX_CMD                           BIT(2)
> +#define ASPEED_I2CD_M_TX_CMD                           BIT(1)
> +#define ASPEED_I2CD_M_START_CMD                                BIT(0)
> +
> +/* 0x18 : I2CD Slave Device Address Register   */
> +#define ASPEED_I2CD_DEV_ADDR_MASK                      GENMASK(6, 0)
> +
> +enum aspeed_i2c_slave_state {
> +       ASPEED_I2C_SLAVE_START,
> +       ASPEED_I2C_SLAVE_READ_REQUESTED,
> +       ASPEED_I2C_SLAVE_READ_PROCESSED,
> +       ASPEED_I2C_SLAVE_WRITE_REQUESTED,
> +       ASPEED_I2C_SLAVE_WRITE_RECEIVED,
> +       ASPEED_I2C_SLAVE_STOP,
> +};
> +
> +struct aspeed_i2c_bus {
> +       struct i2c_adapter              adap;
> +       struct device                   *dev;
> +       void __iomem                    *base;
> +       spinlock_t                      lock;
> +       struct completion               cmd_complete;
> +       int                             irq;
> +       /* Transaction state. */
> +       struct i2c_msg                  *msg;
> +       int                             msg_pos;
> +       u32                             cmd_err;
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +       struct i2c_client               *slave;
> +       enum aspeed_i2c_slave_state     slave_state;
> +#endif
> +};
> +
> +struct aspeed_i2c_controller {
> +       struct device           *dev;
> +       void __iomem            *base;
> +       int                     irq;
> +       struct irq_domain       *irq_domain;
> +};
> +
> +static inline void aspeed_i2c_write(struct aspeed_i2c_bus *bus, u32 val,
> +                                   u32 reg)
> +{
> +       writel(val, bus->base + reg);
> +}
> +
> +static inline u32 aspeed_i2c_read(struct aspeed_i2c_bus *bus, u32 reg)
> +{
> +       return readl(bus->base + reg);
> +}
> +
> +static u8 aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus)
> +{
> +       u32 command;
> +       unsigned long time_left;
> +       unsigned long flags;
> +       int ret = 0;
> +
> +       spin_lock_irqsave(&bus->lock, flags);
> +       command = aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG);
> +       /* Bus is idle: no recovery needed. */
> +       if ((command & ASPEED_I2CD_SDA_LINE_STS) &&
> +           (command & ASPEED_I2CD_SCL_LINE_STS))
> +               goto out;
> +
> +       dev_dbg(bus->dev, "bus hung (state %x), attempting recovery\n",
> +               command);
> +
> +       /* Bus held: put bus in stop state. */
> +       if ((command & ASPEED_I2CD_SDA_LINE_STS) &&
> +           !(command & ASPEED_I2CD_SCL_LINE_STS)) {
> +               aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD,
> +                                ASPEED_I2C_CMD_REG);
> +               reinit_completion(&bus->cmd_complete);
> +               spin_unlock_irqrestore(&bus->lock, flags);
> +
> +               time_left = wait_for_completion_interruptible_timeout(
> +                               &bus->cmd_complete, bus->adap.timeout * HZ);
> +
> +               spin_lock_irqsave(&bus->lock, flags);
> +               if (time_left == 0)
> +                       ret = -ETIMEDOUT;
> +               else if (bus->cmd_err)
> +                       ret = -EIO;
> +       /* Bus error. */
> +       } else if (!(command & ASPEED_I2CD_SDA_LINE_STS)) {
> +               aspeed_i2c_write(bus, ASPEED_I2CD_BUS_RECOVER_CMD,
> +                                ASPEED_I2C_CMD_REG);
> +               reinit_completion(&bus->cmd_complete);
> +               spin_unlock_irqrestore(&bus->lock, flags);
> +
> +               time_left = wait_for_completion_interruptible_timeout(
> +                               &bus->cmd_complete, bus->adap.timeout * HZ);
> +
> +               spin_lock_irqsave(&bus->lock, flags);
> +               if (time_left == 0)
> +                       ret = -ETIMEDOUT;
> +               else if (bus->cmd_err)
> +                       ret = -EIO;
> +               /* Recovery failed. */
> +               else if (!(aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG) &
> +                          ASPEED_I2CD_SDA_LINE_STS))
> +                       ret = -EIO;
> +       }
> +
> +out:
> +       spin_unlock_irqrestore(&bus->lock, flags);
> +       return ret;
> +}
> +
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
> +{
> +       bool irq_handled = true;
> +       u32 command;
> +       u32 irq_status;
> +       u32 status_ack = 0;
> +       u8 value;
> +       struct i2c_client *slave = bus->slave;
> +
> +       spin_lock(&bus->lock);
> +       if (!slave) {
> +               irq_handled = false;
> +               goto out;
> +       }
> +       command = aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG);
> +       irq_status = aspeed_i2c_read(bus, ASPEED_I2C_INTR_STS_REG);
> +
> +       /* Slave was requested, restart state machine. */
> +       if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) {
> +               status_ack |= ASPEED_I2CD_INTR_SLAVE_MATCH;
> +               bus->slave_state = ASPEED_I2C_SLAVE_START;
> +       }
> +       /* Slave is not currently active, irq was for someone else. */
> +       if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
> +               irq_handled = false;
> +               goto out;
> +       }
> +
> +       dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n",
> +               irq_status, command);
> +
> +       /* Slave was sent something. */
> +       if (irq_status & ASPEED_I2CD_INTR_RX_DONE) {
> +               value = aspeed_i2c_read(bus, ASPEED_I2C_BYTE_BUF_REG) >> 8;
> +               /* Handle address frame. */
> +               if (bus->slave_state == ASPEED_I2C_SLAVE_START) {
> +                       if (value & 0x1)
> +                               bus->slave_state =
> +                                               ASPEED_I2C_SLAVE_READ_REQUESTED;
> +                       else
> +                               bus->slave_state =
> +                                               ASPEED_I2C_SLAVE_WRITE_REQUESTED;
> +               }
> +               status_ack |= ASPEED_I2CD_INTR_RX_DONE;
> +       }
> +
> +       /* Slave was asked to stop. */
> +       if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
> +               status_ack |= ASPEED_I2CD_INTR_NORMAL_STOP;
> +               bus->slave_state = ASPEED_I2C_SLAVE_STOP;
> +       }
> +       if (irq_status & ASPEED_I2CD_INTR_TX_NAK) {
> +               status_ack |= ASPEED_I2CD_INTR_TX_NAK;
> +               bus->slave_state = ASPEED_I2C_SLAVE_STOP;
> +       }
> +
> +       if (bus->slave_state == ASPEED_I2C_SLAVE_READ_REQUESTED) {
> +               if (irq_status & ASPEED_I2CD_INTR_TX_ACK)
> +                       dev_err(bus->dev, "Unexpected ACK on read request.\n");
> +               bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED;
> +
> +               i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
> +               aspeed_i2c_write(bus, value, ASPEED_I2C_BYTE_BUF_REG);
> +               aspeed_i2c_write(bus, ASPEED_I2CD_S_TX_CMD, ASPEED_I2C_CMD_REG);
> +       } else if (bus->slave_state == ASPEED_I2C_SLAVE_READ_PROCESSED) {
> +               status_ack |= ASPEED_I2CD_INTR_TX_ACK;
> +               if (!(irq_status & ASPEED_I2CD_INTR_TX_ACK))
> +                       dev_err(bus->dev,
> +                               "Expected ACK after processed read.\n");
> +               i2c_slave_event(slave, I2C_SLAVE_READ_PROCESSED, &value);
> +               aspeed_i2c_write(bus, value, ASPEED_I2C_BYTE_BUF_REG);
> +               aspeed_i2c_write(bus, ASPEED_I2CD_S_TX_CMD, ASPEED_I2C_CMD_REG);
> +       } else if (bus->slave_state == ASPEED_I2C_SLAVE_WRITE_REQUESTED) {
> +               bus->slave_state = ASPEED_I2C_SLAVE_WRITE_RECEIVED;
> +               i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
> +       } else if (bus->slave_state == ASPEED_I2C_SLAVE_WRITE_RECEIVED) {
> +               i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value);
> +       } else if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
> +               i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
> +       }
> +
> +       if (status_ack != irq_status)
> +               dev_err(bus->dev,
> +                       "irq handled != irq. expected %x, but was %x\n",
> +                       irq_status, status_ack);
> +       aspeed_i2c_write(bus, status_ack, ASPEED_I2C_INTR_STS_REG);
> +
> +out:
> +       spin_unlock(&bus->lock);
> +       return irq_handled;
> +}
> +#endif
> +
> +static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
> +{
> +       const u32 errs = ASPEED_I2CD_INTR_ARBIT_LOSS |
> +               ASPEED_I2CD_INTR_ABNORMAL |
> +               ASPEED_I2CD_INTR_SCL_TIMEOUT |
> +               ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |
> +               ASPEED_I2CD_INTR_TX_NAK;
> +       u32 irq_status;
> +
> +       spin_lock(&bus->lock);
> +       irq_status = aspeed_i2c_read(bus, ASPEED_I2C_INTR_STS_REG);
> +       bus->cmd_err = irq_status & errs;
> +
> +       dev_dbg(bus->dev, "master irq status 0x%08x\n", irq_status);
> +
> +       /* No message to transfer. */
> +       if (bus->cmd_err ||
> +           (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) ||
> +           (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE)) {
> +               complete(&bus->cmd_complete);
> +               goto out;
> +       } else if (!bus->msg || bus->msg_pos >= bus->msg->len)
> +               goto out;
> +
> +       if ((bus->msg->flags & I2C_M_RD) &&
> +           (irq_status & ASPEED_I2CD_INTR_RX_DONE)) {
> +               bus->msg->buf[bus->msg_pos++] = aspeed_i2c_read(
> +                               bus, ASPEED_I2C_BYTE_BUF_REG) >> 8;
> +               if (bus->msg_pos + 1 < bus->msg->len)
> +                       aspeed_i2c_write(bus, ASPEED_I2CD_M_RX_CMD,
> +                                        ASPEED_I2C_CMD_REG);
> +               else if (bus->msg_pos < bus->msg->len)
> +                       aspeed_i2c_write(bus, ASPEED_I2CD_M_RX_CMD |
> +                                     ASPEED_I2CD_M_S_RX_CMD_LAST,
> +                                     ASPEED_I2C_CMD_REG);
> +       } else if (!(bus->msg->flags & I2C_M_RD) &&
> +                  (irq_status & ASPEED_I2CD_INTR_TX_ACK)) {
> +               aspeed_i2c_write(bus, bus->msg->buf[bus->msg_pos++],
> +                             ASPEED_I2C_BYTE_BUF_REG);
> +               aspeed_i2c_write(bus, ASPEED_I2CD_M_TX_CMD, ASPEED_I2C_CMD_REG);
> +       }
> +
> +       /* Transmission complete: notify caller. */
> +       if (bus->msg_pos >= bus->msg->len)
> +               complete(&bus->cmd_complete);
> +out:
> +       aspeed_i2c_write(bus, irq_status, ASPEED_I2C_INTR_STS_REG);
> +       spin_unlock(&bus->lock);
> +       return true;
> +}
> +
> +static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
> +{
> +       struct aspeed_i2c_bus *bus = dev_id;
> +
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +       if (aspeed_i2c_slave_irq(bus)) {
> +               dev_dbg(bus->dev, "irq handled by slave.\n");
> +               return IRQ_HANDLED;
> +       }
> +#endif
> +       if (aspeed_i2c_master_irq(bus)) {
> +               dev_dbg(bus->dev, "irq handled by master.\n");
> +               return IRQ_HANDLED;
> +       }
> +       dev_err(bus->dev, "irq not handled properly!\n");
> +       return IRQ_HANDLED;
> +}
> +
> +static int aspeed_i2c_master_single_xfer(struct i2c_adapter *adap,
> +                                     struct i2c_msg *msg)
> +{
> +       struct aspeed_i2c_bus *bus = adap->algo_data;
> +       unsigned long flags;
> +       u8 slave_addr;
> +       u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD;
> +       int ret = msg->len;
> +       unsigned long time_left;
> +
> +       spin_lock_irqsave(&bus->lock, flags);
> +       bus->msg = msg;
> +       bus->msg_pos = 0;
> +       slave_addr = msg->addr << 1;
> +       if (msg->flags & I2C_M_RD) {
> +               slave_addr |= 1;
> +               command |= ASPEED_I2CD_M_RX_CMD;
> +               if (msg->len == 1)
> +                       command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
> +       }
> +       aspeed_i2c_write(bus, slave_addr, ASPEED_I2C_BYTE_BUF_REG);
> +       aspeed_i2c_write(bus, command, ASPEED_I2C_CMD_REG);
> +       reinit_completion(&bus->cmd_complete);
> +       spin_unlock_irqrestore(&bus->lock, flags);
> +
> +       time_left = wait_for_completion_interruptible_timeout(
> +                       &bus->cmd_complete, bus->adap.timeout * HZ * msg->len);
> +       if (time_left == 0)
> +               return -ETIMEDOUT;
> +
> +       spin_lock_irqsave(&bus->lock, flags);
> +       if (bus->cmd_err)
> +               ret = -EIO;
> +       bus->msg = NULL;
> +       spin_unlock_irqrestore(&bus->lock, flags);
> +
> +       return ret;
> +}
> +
> +static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
> +                                 struct i2c_msg *msgs, int num)
> +{
> +       struct aspeed_i2c_bus *bus = adap->algo_data;
> +       int ret;
> +       int i;
> +       unsigned long flags;
> +       unsigned long time_left;
> +
> +       /* If bus is busy, attempt recovery. We assume a single master
> +        * environment.
> +        */
> +       if (aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG) &
> +           ASPEED_I2CD_BUS_BUSY_STS) {
> +               ret = aspeed_i2c_recover_bus(bus);
> +               if (ret)
> +                       return ret;
> +       }
> +
> +       for (i = 0; i < num; i++) {
> +               ret = aspeed_i2c_master_single_xfer(adap, &msgs[i]);
> +               if (ret < 0)
> +                       break;
> +               /* TODO: Support other forms of I2C protocol mangling. */
> +               if (msgs[i].flags & I2C_M_STOP) {
> +                       spin_lock_irqsave(&bus->lock, flags);
> +                       aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD,
> +                                     ASPEED_I2C_CMD_REG);
> +                       reinit_completion(&bus->cmd_complete);
> +                       spin_unlock_irqrestore(&bus->lock, flags);
> +
> +                       time_left = wait_for_completion_interruptible_timeout(
> +                                       &bus->cmd_complete,
> +                                       bus->adap.timeout * HZ);
> +                       if (time_left == 0)
> +                               return -ETIMEDOUT;
> +               }
> +       }
> +
> +       spin_lock_irqsave(&bus->lock, flags);
> +       aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD, ASPEED_I2C_CMD_REG);
> +       reinit_completion(&bus->cmd_complete);
> +       spin_unlock_irqrestore(&bus->lock, flags);
> +
> +       time_left = wait_for_completion_interruptible_timeout(
> +                       &bus->cmd_complete, bus->adap.timeout * HZ);
> +       if (time_left == 0)
> +               return -ETIMEDOUT;
> +
> +       /* If nothing went wrong, return number of messages transferred. */
> +       if (ret < 0)
> +               return ret;
> +       else
> +               return i;
> +}
> +
> +static u32 aspeed_i2c_functionality(struct i2c_adapter *adap)
> +{
> +       return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
> +}
> +
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +static int aspeed_i2c_reg_slave(struct i2c_client *client)
> +{
> +       struct aspeed_i2c_bus *bus;
> +       unsigned long flags;
> +       u32 addr_reg_val;
> +       u32 func_ctrl_reg_val;
> +
> +       bus = client->adapter->algo_data;
> +       spin_lock_irqsave(&bus->lock, flags);
> +       if (bus->slave) {
> +               spin_unlock_irqrestore(&bus->lock, flags);
> +               return -EINVAL;
> +       }
> +
> +       /* Set slave addr. */
> +       addr_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_DEV_ADDR_REG);
> +       addr_reg_val &= ~ASPEED_I2CD_DEV_ADDR_MASK;
> +       addr_reg_val |= client->addr & ASPEED_I2CD_DEV_ADDR_MASK;
> +       aspeed_i2c_write(bus, addr_reg_val, ASPEED_I2C_DEV_ADDR_REG);
> +
> +       /* Switch from master mode to slave mode. */
> +       func_ctrl_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG);
> +       func_ctrl_reg_val &= ~ASPEED_I2CD_MASTER_EN;
> +       func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN;
> +       aspeed_i2c_write(bus, func_ctrl_reg_val, ASPEED_I2C_FUN_CTRL_REG);
> +
> +       bus->slave = client;
> +       bus->slave_state = ASPEED_I2C_SLAVE_STOP;
> +       spin_unlock_irqrestore(&bus->lock, flags);
> +       return 0;
> +}
> +
> +static int aspeed_i2c_unreg_slave(struct i2c_client *client)
> +{
> +       struct aspeed_i2c_bus *bus = client->adapter->algo_data;
> +       unsigned long flags;
> +       u32 func_ctrl_reg_val;
> +
> +       spin_lock_irqsave(&bus->lock, flags);
> +       if (!bus->slave) {
> +               spin_unlock_irqrestore(&bus->lock, flags);
> +               return -EINVAL;
> +       }
> +
> +       /* Switch from slave mode to master mode. */
> +       func_ctrl_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG);
> +       func_ctrl_reg_val &= ~ASPEED_I2CD_SLAVE_EN;
> +       func_ctrl_reg_val |= ASPEED_I2CD_MASTER_EN;
> +       aspeed_i2c_write(bus, func_ctrl_reg_val, ASPEED_I2C_FUN_CTRL_REG);
> +
> +       bus->slave = NULL;
> +       spin_unlock_irqrestore(&bus->lock, flags);
> +       return 0;
> +}
> +#endif
> +
> +static const struct i2c_algorithm aspeed_i2c_algo = {
> +       .master_xfer    = aspeed_i2c_master_xfer,
> +       .functionality  = aspeed_i2c_functionality,
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +       .reg_slave      = aspeed_i2c_reg_slave,
> +       .unreg_slave    = aspeed_i2c_unreg_slave,
> +#endif
> +};
> +
> +static u32 aspeed_i2c_get_clk_reg_val(u32 divider_ratio)
> +{
> +       unsigned int inc = 0, div;
> +       u32 scl_low, scl_high, data;
> +
> +       for (div = 0; divider_ratio >= 16; div++) {
> +               inc |= (divider_ratio & 1);
> +               divider_ratio >>= 1;
> +       }
> +       divider_ratio += inc;
> +       scl_low = (divider_ratio >> 1) - 1;
> +       scl_high = divider_ratio - scl_low - 2;
> +       data = 0x77700300 | (scl_high << 16) | (scl_low << 12) | div;
> +       return data;
> +}
> +
> +static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus,
> +                           struct platform_device *pdev)
> +{
> +       struct clk *pclk;
> +       u32 clk_freq;
> +       u32 divider_ratio;
> +       int ret;
> +
> +       pclk = devm_clk_get(&pdev->dev, NULL);
> +       if (IS_ERR(pclk)) {
> +               dev_err(&pdev->dev, "clk_get failed\n");
> +               return PTR_ERR(pclk);
> +       }
> +       ret = of_property_read_u32(pdev->dev.of_node,
> +                       "clock-frequency", &clk_freq);
> +       if (ret < 0) {
> +               dev_err(&pdev->dev,
> +                               "Could not read clock-frequency property\n");
> +               clk_freq = 100000;
> +       }
> +       divider_ratio = clk_get_rate(pclk) / clk_freq;
> +       /* We just need the clock rate, we don't actually use the clk object. */
> +       devm_clk_put(&pdev->dev, pclk);
> +
> +       /* Set AC Timing */
> +       if (clk_freq / 1000 > 400) {
> +               aspeed_i2c_write(bus, aspeed_i2c_read(bus,
> +                                                     ASPEED_I2C_FUN_CTRL_REG) |
> +                               ASPEED_I2CD_M_HIGH_SPEED_EN |
> +                               ASPEED_I2CD_M_SDA_DRIVE_1T_EN |
> +                               ASPEED_I2CD_SDA_DRIVE_1T_EN,
> +                               ASPEED_I2C_FUN_CTRL_REG);
> +
> +               aspeed_i2c_write(bus, 0x3, ASPEED_I2C_AC_TIMING_REG2);
> +               aspeed_i2c_write(bus, aspeed_i2c_get_clk_reg_val(divider_ratio),
> +                             ASPEED_I2C_AC_TIMING_REG1);
> +       } else {
> +               aspeed_i2c_write(bus, aspeed_i2c_get_clk_reg_val(divider_ratio),
> +                             ASPEED_I2C_AC_TIMING_REG1);
> +               aspeed_i2c_write(bus, ASPEED_NO_TIMEOUT_CTRL,
> +                                ASPEED_I2C_AC_TIMING_REG2);
> +       }
> +
> +       return 0;
> +}
> +
> +static void noop(struct irq_data *data) { }
> +
> +static struct irq_chip aspeed_i2c_irqchip = {
> +       .name           = "ast-i2c",
> +       .irq_unmask     = noop,
> +       .irq_mask       = noop,
> +};
> +
> +static int aspeed_i2c_probe_bus(struct platform_device *pdev)
> +{
> +       struct aspeed_i2c_bus *bus;
> +       struct aspeed_i2c_controller *controller =
> +                       dev_get_drvdata(pdev->dev.parent);
> +       struct resource *res;
> +       int ret, irq;
> +       u32 hwirq;
> +
> +       bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
> +       if (!bus)
> +               return -ENOMEM;
> +
> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       bus->base = devm_ioremap_resource(&pdev->dev, res);
> +       if (IS_ERR(bus->base))
> +               return PTR_ERR(bus->base);
> +
> +       bus->irq = platform_get_irq(pdev, 0);
> +       if (bus->irq < 0)
> +               return -ENXIO;
> +       ret = of_property_read_u32(pdev->dev.of_node, "interrupts", &hwirq);
> +       if (ret < 0) {
> +               dev_err(&pdev->dev, "no I2C 'interrupts' property\n");
> +               return -ENXIO;
> +       }
> +       irq = irq_create_mapping(controller->irq_domain, hwirq);
> +       irq_set_chip_data(irq, controller);
> +       irq_set_chip_and_handler(irq, &aspeed_i2c_irqchip, handle_simple_irq);
> +       ret = devm_request_irq(&pdev->dev, bus->irq, aspeed_i2c_bus_irq,
> +                       0, dev_name(&pdev->dev), bus);
> +       if (ret) {
> +               dev_err(&pdev->dev, "failed to request interrupt\n");
> +               return -ENXIO;
> +       }
> +
> +       /* Initialize the I2C adapter */
> +       spin_lock_init(&bus->lock);
> +       init_completion(&bus->cmd_complete);
> +       bus->adap.owner = THIS_MODULE;
> +       bus->adap.retries = 0;
> +       bus->adap.timeout = 5;
> +       bus->adap.algo = &aspeed_i2c_algo;
> +       bus->adap.algo_data = bus;
> +       bus->adap.dev.parent = &pdev->dev;
> +       bus->adap.dev.of_node = pdev->dev.of_node;
> +       snprintf(bus->adap.name, sizeof(bus->adap.name), "Aspeed i2c");
> +
> +       bus->dev = &pdev->dev;
> +
> +       /* reset device: disable master & slave functions */
> +       aspeed_i2c_write(bus, 0, ASPEED_I2C_FUN_CTRL_REG);
> +
> +       ret = aspeed_i2c_init_clk(bus, pdev);
> +       if (ret < 0)
> +               return ret;
> +
> +       /* Enable Master Mode */
> +       aspeed_i2c_write(bus, aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG) |
> +                     ASPEED_I2CD_MASTER_EN |
> +                     ASPEED_I2CD_MULTI_MASTER_DIS, ASPEED_I2C_FUN_CTRL_REG);
> +
> +       /* Set interrupt generation of I2C controller */
> +       aspeed_i2c_write(bus, ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |
> +                       ASPEED_I2CD_INTR_BUS_RECOVER_DONE |
> +                       ASPEED_I2CD_INTR_SCL_TIMEOUT |
> +                       ASPEED_I2CD_INTR_ABNORMAL |
> +                       ASPEED_I2CD_INTR_NORMAL_STOP |
> +                       ASPEED_I2CD_INTR_ARBIT_LOSS |
> +                       ASPEED_I2CD_INTR_RX_DONE |
> +                       ASPEED_I2CD_INTR_TX_NAK |
> +                       ASPEED_I2CD_INTR_TX_ACK,
> +                       ASPEED_I2C_INTR_CTRL_REG);
> +
> +       ret = i2c_add_adapter(&bus->adap);
> +       if (ret < 0)
> +               return -ENXIO;
> +
> +       platform_set_drvdata(pdev, bus);
> +
> +       dev_info(bus->dev, "i2c bus %d registered, irq %d\n",
> +                       bus->adap.nr, bus->irq);
> +
> +       return 0;
> +}
> +
> +static int aspeed_i2c_remove_bus(struct platform_device *pdev)
> +{
> +       struct aspeed_i2c_bus *bus = platform_get_drvdata(pdev);
> +
> +       i2c_del_adapter(&bus->adap);
> +       return 0;
> +}
> +
> +static const struct of_device_id aspeed_i2c_bus_of_table[] = {
> +       { .compatible = "aspeed,ast2400-i2c-bus", },
> +       { .compatible = "aspeed,ast2500-i2c-bus", },
> +       { },
> +};
> +MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table);
> +
> +static struct platform_driver aspeed_i2c_bus_driver = {
> +       .probe          = aspeed_i2c_probe_bus,
> +       .remove         = aspeed_i2c_remove_bus,
> +       .driver         = {
> +               .name           = "ast-i2c-bus",
> +               .of_match_table = aspeed_i2c_bus_of_table,
> +       },
> +};
> +
> +static void aspeed_i2c_controller_irq(struct irq_desc *desc)
> +{
> +       struct aspeed_i2c_controller *c = irq_desc_get_handler_data(desc);
> +       unsigned long p, status;
> +       unsigned int bus_irq;
> +
> +       status = readl(c->base);
> +       for_each_set_bit(p, &status, ASPEED_I2C_NUM_BUS) {
> +               bus_irq = irq_find_mapping(c->irq_domain, p);
> +               generic_handle_irq(bus_irq);
> +       }
> +}
> +
> +static int aspeed_i2c_probe_controller(struct platform_device *pdev)
> +{
> +       struct aspeed_i2c_controller *controller;
> +       struct device_node *np;
> +       struct resource *res;
> +
> +       controller = kzalloc(sizeof(*controller), GFP_KERNEL);
> +       if (!controller)
> +               return -ENOMEM;
> +
> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       controller->base = devm_ioremap_resource(&pdev->dev, res);
> +       if (IS_ERR(controller->base))
> +               return PTR_ERR(controller->base);
> +
> +       controller->irq = platform_get_irq(pdev, 0);
> +       if (controller->irq < 0)
> +               return -ENXIO;
> +
> +       controller->irq_domain = irq_domain_add_linear(pdev->dev.of_node,
> +                       ASPEED_I2C_NUM_BUS, &irq_domain_simple_ops, NULL);
> +       if (!controller->irq_domain)
> +               return -ENXIO;
> +       controller->irq_domain->name = "ast-i2c-domain";
> +
> +       irq_set_chained_handler_and_data(controller->irq,
> +                       aspeed_i2c_controller_irq, controller);
> +
> +       controller->dev = &pdev->dev;
> +
> +       platform_set_drvdata(pdev, controller);
> +
> +       dev_info(controller->dev, "i2c controller registered, irq %d\n",
> +                       controller->irq);
> +
> +       for_each_child_of_node(pdev->dev.of_node, np) {
> +               of_platform_device_create(np, NULL, &pdev->dev);
> +               of_node_put(np);
> +       }
> +
> +       return 0;
> +}
> +
> +static int aspeed_i2c_remove_controller(struct platform_device *pdev)
> +{
> +       struct aspeed_i2c_controller *controller = platform_get_drvdata(pdev);
> +
> +       irq_domain_remove(controller->irq_domain);
> +       return 0;
> +}
> +
> +static const struct of_device_id aspeed_i2c_controller_of_table[] = {
> +       { .compatible = "aspeed,ast2400-i2c-controller", },
> +       { .compatible = "aspeed,ast2500-i2c-controller", },
> +       { },
> +};
> +MODULE_DEVICE_TABLE(of, aspeed_i2c_controller_of_table);
> +
> +static struct platform_driver aspeed_i2c_controller_driver = {
> +       .probe          = aspeed_i2c_probe_controller,
> +       .remove         = aspeed_i2c_remove_controller,
> +       .driver         = {
> +               .name           = "ast-i2c-controller",
> +               .of_match_table = aspeed_i2c_controller_of_table,
> +       },
> +};
> +
> +static int __init aspeed_i2c_driver_init(void)
> +{
> +       int ret;
> +
> +       ret = platform_driver_register(&aspeed_i2c_controller_driver);
> +       if (ret < 0)
> +               return ret;
> +       return platform_driver_register(&aspeed_i2c_bus_driver);
> +}
> +module_init(aspeed_i2c_driver_init);
> +
> +static void __exit aspeed_i2c_driver_exit(void)
> +{
> +       platform_driver_unregister(&aspeed_i2c_bus_driver);
> +       platform_driver_unregister(&aspeed_i2c_controller_driver);
> +}
> +module_exit(aspeed_i2c_driver_exit);
> +
> +MODULE_AUTHOR("Brendan Higgins <brendanhiggins@google.com>");
> +MODULE_DESCRIPTION("Aspeed I2C Bus Driver");
> +MODULE_LICENSE("GPL");
> --
> 2.8.0.rc3.226.g39d4020
>

Re: [PATCH v4 1/2] i2c: aspeed: added driver for Aspeed I2C

[Joel Stanley]

On Sat, Nov 5, 2016 at 12:28 PM, Brendan Higgins
<brendanhiggins@google.com> wrote:
> Added initial master and slave support for Aspeed I2C controller.
> Supports fourteen busses present in ast24xx and ast25xx BMC SoCs by
> Aspeed.
>
> Signed-off-by: Brendan Higgins <brendanhiggins@google.com>

I've tested this on an OpenPower Palmetto BMC system and on the Qemu
machine for the same board.

Reviewed-by: Joel Stanley <joel@jms.id.au>

Cheers,

Joel

> ---
> Changes for v2:
>   - Added single module_init (multiple was breaking some builds).
> Changes for v3:
>   - Removed "bus" device tree param; now extracted from bus address offset
> Changes for v4:
>   - I2C adapter number is now generated dynamically unless specified in alias.
> ---
>  drivers/i2c/busses/Kconfig      |  10 +
>  drivers/i2c/busses/Makefile     |   1 +
>  drivers/i2c/busses/i2c-aspeed.c | 807 ++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 818 insertions(+)
>  create mode 100644 drivers/i2c/busses/i2c-aspeed.c
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index d252276..b6caa5d 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -1009,6 +1009,16 @@ config I2C_RCAR
>           This driver can also be built as a module.  If so, the module
>           will be called i2c-rcar.
>
> +config I2C_ASPEED
> +       tristate "Aspeed AST2xxx SoC I2C Controller"
> +       depends on ARCH_ASPEED
> +       help
> +         If you say yes to this option, support will be included for the
> +         Aspeed AST2xxx SoC I2C controller.
> +
> +         This driver can also be built as a module.  If so, the module
> +         will be called i2c-aspeed.
> +
>  comment "External I2C/SMBus adapter drivers"
>
>  config I2C_DIOLAN_U2C
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index 29764cc..826e780 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -99,6 +99,7 @@ obj-$(CONFIG_I2C_XILINX)      += i2c-xiic.o
>  obj-$(CONFIG_I2C_XLR)          += i2c-xlr.o
>  obj-$(CONFIG_I2C_XLP9XX)       += i2c-xlp9xx.o
>  obj-$(CONFIG_I2C_RCAR)         += i2c-rcar.o
> +obj-$(CONFIG_I2C_ASPEED)       += i2c-aspeed.o
>
>  # External I2C/SMBus adapter drivers
>  obj-$(CONFIG_I2C_DIOLAN_U2C)   += i2c-diolan-u2c.o
> diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
> new file mode 100644
> index 0000000..88e078a
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-aspeed.c
> @@ -0,0 +1,807 @@
> +/*
> + *  I2C adapter for the ASPEED I2C bus.
> + *
> + *  Copyright (C) 2012-2020  ASPEED Technology Inc.
> + *  Copyright 2016 IBM Corporation
> + *  Copyright 2016 Google, Inc.
> + *
> + *  This program is free software; you can redistribute it and/or modify
> + *  it under the terms of the GNU General Public License version 2 as
> + *  published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/errno.h>
> +#include <linux/interrupt.h>
> +#include <linux/completion.h>
> +#include <linux/slab.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/err.h>
> +#include <linux/clk.h>
> +
> +/* I2C Register */
> +#define ASPEED_I2C_FUN_CTRL_REG                                0x00
> +#define ASPEED_I2C_AC_TIMING_REG1                      0x04
> +#define ASPEED_I2C_AC_TIMING_REG2                      0x08
> +#define ASPEED_I2C_INTR_CTRL_REG                       0x0c
> +#define ASPEED_I2C_INTR_STS_REG                                0x10
> +#define ASPEED_I2C_CMD_REG                             0x14
> +#define ASPEED_I2C_DEV_ADDR_REG                                0x18
> +#define ASPEED_I2C_BYTE_BUF_REG                                0x20
> +#define ASPEED_I2C_OFFSET_START                                0x40
> +#define ASPEED_I2C_OFFSET_INCREMENT                    0x40
> +
> +#define ASPEED_I2C_NUM_BUS 14
> +
> +/* Global Register Definition */
> +/* 0x00 : I2C Interrupt Status Register  */
> +/* 0x08 : I2C Interrupt Target Assignment  */
> +
> +/* Device Register Definition */
> +/* 0x00 : I2CD Function Control Register  */
> +#define ASPEED_I2CD_MULTI_MASTER_DIS                   BIT(15)
> +#define ASPEED_I2CD_SDA_DRIVE_1T_EN                    BIT(8)
> +#define ASPEED_I2CD_M_SDA_DRIVE_1T_EN                  BIT(7)
> +#define ASPEED_I2CD_M_HIGH_SPEED_EN                    BIT(6)
> +#define ASPEED_I2CD_SLAVE_EN                           BIT(1)
> +#define ASPEED_I2CD_MASTER_EN                          BIT(0)
> +
> +/* 0x08 : I2CD Clock and AC Timing Control Register #2 */
> +#define ASPEED_NO_TIMEOUT_CTRL                         0
> +
> +
> +/* 0x0c : I2CD Interrupt Control Register &
> + * 0x10 : I2CD Interrupt Status Register
> + *
> + * These share bit definitions, so use the same values for the enable &
> + * status bits.
> + */
> +#define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT                        BIT(14)
> +#define ASPEED_I2CD_INTR_BUS_RECOVER_DONE              BIT(13)
> +#define ASPEED_I2CD_INTR_SLAVE_MATCH                   BIT(7)
> +#define ASPEED_I2CD_INTR_SCL_TIMEOUT                   BIT(6)
> +#define ASPEED_I2CD_INTR_ABNORMAL                      BIT(5)
> +#define ASPEED_I2CD_INTR_NORMAL_STOP                   BIT(4)
> +#define ASPEED_I2CD_INTR_ARBIT_LOSS                    BIT(3)
> +#define ASPEED_I2CD_INTR_RX_DONE                       BIT(2)
> +#define ASPEED_I2CD_INTR_TX_NAK                                BIT(1)
> +#define ASPEED_I2CD_INTR_TX_ACK                                BIT(0)
> +
> +/* 0x14 : I2CD Command/Status Register   */
> +#define ASPEED_I2CD_SCL_LINE_STS                       BIT(18)
> +#define ASPEED_I2CD_SDA_LINE_STS                       BIT(17)
> +#define ASPEED_I2CD_BUS_BUSY_STS                       BIT(16)
> +#define ASPEED_I2CD_BUS_RECOVER_CMD                    BIT(11)
> +
> +/* Command Bit */
> +#define ASPEED_I2CD_M_STOP_CMD                         BIT(5)
> +#define ASPEED_I2CD_M_S_RX_CMD_LAST                    BIT(4)
> +#define ASPEED_I2CD_M_RX_CMD                           BIT(3)
> +#define ASPEED_I2CD_S_TX_CMD                           BIT(2)
> +#define ASPEED_I2CD_M_TX_CMD                           BIT(1)
> +#define ASPEED_I2CD_M_START_CMD                                BIT(0)
> +
> +/* 0x18 : I2CD Slave Device Address Register   */
> +#define ASPEED_I2CD_DEV_ADDR_MASK                      GENMASK(6, 0)
> +
> +enum aspeed_i2c_slave_state {
> +       ASPEED_I2C_SLAVE_START,
> +       ASPEED_I2C_SLAVE_READ_REQUESTED,
> +       ASPEED_I2C_SLAVE_READ_PROCESSED,
> +       ASPEED_I2C_SLAVE_WRITE_REQUESTED,
> +       ASPEED_I2C_SLAVE_WRITE_RECEIVED,
> +       ASPEED_I2C_SLAVE_STOP,
> +};
> +
> +struct aspeed_i2c_bus {
> +       struct i2c_adapter              adap;
> +       struct device                   *dev;
> +       void __iomem                    *base;
> +       spinlock_t                      lock;
> +       struct completion               cmd_complete;
> +       int                             irq;
> +       /* Transaction state. */
> +       struct i2c_msg                  *msg;
> +       int                             msg_pos;
> +       u32                             cmd_err;
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +       struct i2c_client               *slave;
> +       enum aspeed_i2c_slave_state     slave_state;
> +#endif
> +};
> +
> +struct aspeed_i2c_controller {
> +       struct device           *dev;
> +       void __iomem            *base;
> +       int                     irq;
> +       struct irq_domain       *irq_domain;
> +};
> +
> +static inline void aspeed_i2c_write(struct aspeed_i2c_bus *bus, u32 val,
> +                                   u32 reg)
> +{
> +       writel(val, bus->base + reg);
> +}
> +
> +static inline u32 aspeed_i2c_read(struct aspeed_i2c_bus *bus, u32 reg)
> +{
> +       return readl(bus->base + reg);
> +}
> +
> +static u8 aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus)
> +{
> +       u32 command;
> +       unsigned long time_left;
> +       unsigned long flags;
> +       int ret = 0;
> +
> +       spin_lock_irqsave(&bus->lock, flags);
> +       command = aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG);
> +       /* Bus is idle: no recovery needed. */
> +       if ((command & ASPEED_I2CD_SDA_LINE_STS) &&
> +           (command & ASPEED_I2CD_SCL_LINE_STS))
> +               goto out;
> +
> +       dev_dbg(bus->dev, "bus hung (state %x), attempting recovery\n",
> +               command);
> +
> +       /* Bus held: put bus in stop state. */
> +       if ((command & ASPEED_I2CD_SDA_LINE_STS) &&
> +           !(command & ASPEED_I2CD_SCL_LINE_STS)) {
> +               aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD,
> +                                ASPEED_I2C_CMD_REG);
> +               reinit_completion(&bus->cmd_complete);
> +               spin_unlock_irqrestore(&bus->lock, flags);
> +
> +               time_left = wait_for_completion_interruptible_timeout(
> +                               &bus->cmd_complete, bus->adap.timeout * HZ);
> +
> +               spin_lock_irqsave(&bus->lock, flags);
> +               if (time_left == 0)
> +                       ret = -ETIMEDOUT;
> +               else if (bus->cmd_err)
> +                       ret = -EIO;
> +       /* Bus error. */
> +       } else if (!(command & ASPEED_I2CD_SDA_LINE_STS)) {
> +               aspeed_i2c_write(bus, ASPEED_I2CD_BUS_RECOVER_CMD,
> +                                ASPEED_I2C_CMD_REG);
> +               reinit_completion(&bus->cmd_complete);
> +               spin_unlock_irqrestore(&bus->lock, flags);
> +
> +               time_left = wait_for_completion_interruptible_timeout(
> +                               &bus->cmd_complete, bus->adap.timeout * HZ);
> +
> +               spin_lock_irqsave(&bus->lock, flags);
> +               if (time_left == 0)
> +                       ret = -ETIMEDOUT;
> +               else if (bus->cmd_err)
> +                       ret = -EIO;
> +               /* Recovery failed. */
> +               else if (!(aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG) &
> +                          ASPEED_I2CD_SDA_LINE_STS))
> +                       ret = -EIO;
> +       }
> +
> +out:
> +       spin_unlock_irqrestore(&bus->lock, flags);
> +       return ret;
> +}
> +
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
> +{
> +       bool irq_handled = true;
> +       u32 command;
> +       u32 irq_status;
> +       u32 status_ack = 0;
> +       u8 value;
> +       struct i2c_client *slave = bus->slave;
> +
> +       spin_lock(&bus->lock);
> +       if (!slave) {
> +               irq_handled = false;
> +               goto out;
> +       }
> +       command = aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG);
> +       irq_status = aspeed_i2c_read(bus, ASPEED_I2C_INTR_STS_REG);
> +
> +       /* Slave was requested, restart state machine. */
> +       if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) {
> +               status_ack |= ASPEED_I2CD_INTR_SLAVE_MATCH;
> +               bus->slave_state = ASPEED_I2C_SLAVE_START;
> +       }
> +       /* Slave is not currently active, irq was for someone else. */
> +       if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
> +               irq_handled = false;
> +               goto out;
> +       }
> +
> +       dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n",
> +               irq_status, command);
> +
> +       /* Slave was sent something. */
> +       if (irq_status & ASPEED_I2CD_INTR_RX_DONE) {
> +               value = aspeed_i2c_read(bus, ASPEED_I2C_BYTE_BUF_REG) >> 8;
> +               /* Handle address frame. */
> +               if (bus->slave_state == ASPEED_I2C_SLAVE_START) {
> +                       if (value & 0x1)
> +                               bus->slave_state =
> +                                               ASPEED_I2C_SLAVE_READ_REQUESTED;
> +                       else
> +                               bus->slave_state =
> +                                               ASPEED_I2C_SLAVE_WRITE_REQUESTED;
> +               }
> +               status_ack |= ASPEED_I2CD_INTR_RX_DONE;
> +       }
> +
> +       /* Slave was asked to stop. */
> +       if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
> +               status_ack |= ASPEED_I2CD_INTR_NORMAL_STOP;
> +               bus->slave_state = ASPEED_I2C_SLAVE_STOP;
> +       }
> +       if (irq_status & ASPEED_I2CD_INTR_TX_NAK) {
> +               status_ack |= ASPEED_I2CD_INTR_TX_NAK;
> +               bus->slave_state = ASPEED_I2C_SLAVE_STOP;
> +       }
> +
> +       if (bus->slave_state == ASPEED_I2C_SLAVE_READ_REQUESTED) {
> +               if (irq_status & ASPEED_I2CD_INTR_TX_ACK)
> +                       dev_err(bus->dev, "Unexpected ACK on read request.\n");
> +               bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED;
> +
> +               i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
> +               aspeed_i2c_write(bus, value, ASPEED_I2C_BYTE_BUF_REG);
> +               aspeed_i2c_write(bus, ASPEED_I2CD_S_TX_CMD, ASPEED_I2C_CMD_REG);
> +       } else if (bus->slave_state == ASPEED_I2C_SLAVE_READ_PROCESSED) {
> +               status_ack |= ASPEED_I2CD_INTR_TX_ACK;
> +               if (!(irq_status & ASPEED_I2CD_INTR_TX_ACK))
> +                       dev_err(bus->dev,
> +                               "Expected ACK after processed read.\n");
> +               i2c_slave_event(slave, I2C_SLAVE_READ_PROCESSED, &value);
> +               aspeed_i2c_write(bus, value, ASPEED_I2C_BYTE_BUF_REG);
> +               aspeed_i2c_write(bus, ASPEED_I2CD_S_TX_CMD, ASPEED_I2C_CMD_REG);
> +       } else if (bus->slave_state == ASPEED_I2C_SLAVE_WRITE_REQUESTED) {
> +               bus->slave_state = ASPEED_I2C_SLAVE_WRITE_RECEIVED;
> +               i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
> +       } else if (bus->slave_state == ASPEED_I2C_SLAVE_WRITE_RECEIVED) {
> +               i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value);
> +       } else if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
> +               i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
> +       }
> +
> +       if (status_ack != irq_status)
> +               dev_err(bus->dev,
> +                       "irq handled != irq. expected %x, but was %x\n",
> +                       irq_status, status_ack);
> +       aspeed_i2c_write(bus, status_ack, ASPEED_I2C_INTR_STS_REG);
> +
> +out:
> +       spin_unlock(&bus->lock);
> +       return irq_handled;
> +}
> +#endif
> +
> +static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
> +{
> +       const u32 errs = ASPEED_I2CD_INTR_ARBIT_LOSS |
> +               ASPEED_I2CD_INTR_ABNORMAL |
> +               ASPEED_I2CD_INTR_SCL_TIMEOUT |
> +               ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |
> +               ASPEED_I2CD_INTR_TX_NAK;
> +       u32 irq_status;
> +
> +       spin_lock(&bus->lock);
> +       irq_status = aspeed_i2c_read(bus, ASPEED_I2C_INTR_STS_REG);
> +       bus->cmd_err = irq_status & errs;
> +
> +       dev_dbg(bus->dev, "master irq status 0x%08x\n", irq_status);
> +
> +       /* No message to transfer. */
> +       if (bus->cmd_err ||
> +           (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) ||
> +           (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE)) {
> +               complete(&bus->cmd_complete);
> +               goto out;
> +       } else if (!bus->msg || bus->msg_pos >= bus->msg->len)
> +               goto out;
> +
> +       if ((bus->msg->flags & I2C_M_RD) &&
> +           (irq_status & ASPEED_I2CD_INTR_RX_DONE)) {
> +               bus->msg->buf[bus->msg_pos++] = aspeed_i2c_read(
> +                               bus, ASPEED_I2C_BYTE_BUF_REG) >> 8;
> +               if (bus->msg_pos + 1 < bus->msg->len)
> +                       aspeed_i2c_write(bus, ASPEED_I2CD_M_RX_CMD,
> +                                        ASPEED_I2C_CMD_REG);
> +               else if (bus->msg_pos < bus->msg->len)
> +                       aspeed_i2c_write(bus, ASPEED_I2CD_M_RX_CMD |
> +                                     ASPEED_I2CD_M_S_RX_CMD_LAST,
> +                                     ASPEED_I2C_CMD_REG);
> +       } else if (!(bus->msg->flags & I2C_M_RD) &&
> +                  (irq_status & ASPEED_I2CD_INTR_TX_ACK)) {
> +               aspeed_i2c_write(bus, bus->msg->buf[bus->msg_pos++],
> +                             ASPEED_I2C_BYTE_BUF_REG);
> +               aspeed_i2c_write(bus, ASPEED_I2CD_M_TX_CMD, ASPEED_I2C_CMD_REG);
> +       }
> +
> +       /* Transmission complete: notify caller. */
> +       if (bus->msg_pos >= bus->msg->len)
> +               complete(&bus->cmd_complete);
> +out:
> +       aspeed_i2c_write(bus, irq_status, ASPEED_I2C_INTR_STS_REG);
> +       spin_unlock(&bus->lock);
> +       return true;
> +}
> +
> +static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
> +{
> +       struct aspeed_i2c_bus *bus = dev_id;
> +
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +       if (aspeed_i2c_slave_irq(bus)) {
> +               dev_dbg(bus->dev, "irq handled by slave.\n");
> +               return IRQ_HANDLED;
> +       }
> +#endif
> +       if (aspeed_i2c_master_irq(bus)) {
> +               dev_dbg(bus->dev, "irq handled by master.\n");
> +               return IRQ_HANDLED;
> +       }
> +       dev_err(bus->dev, "irq not handled properly!\n");
> +       return IRQ_HANDLED;
> +}
> +
> +static int aspeed_i2c_master_single_xfer(struct i2c_adapter *adap,
> +                                     struct i2c_msg *msg)
> +{
> +       struct aspeed_i2c_bus *bus = adap->algo_data;
> +       unsigned long flags;
> +       u8 slave_addr;
> +       u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD;
> +       int ret = msg->len;
> +       unsigned long time_left;
> +
> +       spin_lock_irqsave(&bus->lock, flags);
> +       bus->msg = msg;
> +       bus->msg_pos = 0;
> +       slave_addr = msg->addr << 1;
> +       if (msg->flags & I2C_M_RD) {
> +               slave_addr |= 1;
> +               command |= ASPEED_I2CD_M_RX_CMD;
> +               if (msg->len == 1)
> +                       command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
> +       }
> +       aspeed_i2c_write(bus, slave_addr, ASPEED_I2C_BYTE_BUF_REG);
> +       aspeed_i2c_write(bus, command, ASPEED_I2C_CMD_REG);
> +       reinit_completion(&bus->cmd_complete);
> +       spin_unlock_irqrestore(&bus->lock, flags);
> +
> +       time_left = wait_for_completion_interruptible_timeout(
> +                       &bus->cmd_complete, bus->adap.timeout * HZ * msg->len);
> +       if (time_left == 0)
> +               return -ETIMEDOUT;
> +
> +       spin_lock_irqsave(&bus->lock, flags);
> +       if (bus->cmd_err)
> +               ret = -EIO;
> +       bus->msg = NULL;
> +       spin_unlock_irqrestore(&bus->lock, flags);
> +
> +       return ret;
> +}
> +
> +static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
> +                                 struct i2c_msg *msgs, int num)
> +{
> +       struct aspeed_i2c_bus *bus = adap->algo_data;
> +       int ret;
> +       int i;
> +       unsigned long flags;
> +       unsigned long time_left;
> +
> +       /* If bus is busy, attempt recovery. We assume a single master
> +        * environment.
> +        */
> +       if (aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG) &
> +           ASPEED_I2CD_BUS_BUSY_STS) {
> +               ret = aspeed_i2c_recover_bus(bus);
> +               if (ret)
> +                       return ret;
> +       }
> +
> +       for (i = 0; i < num; i++) {
> +               ret = aspeed_i2c_master_single_xfer(adap, &msgs[i]);
> +               if (ret < 0)
> +                       break;
> +               /* TODO: Support other forms of I2C protocol mangling. */
> +               if (msgs[i].flags & I2C_M_STOP) {
> +                       spin_lock_irqsave(&bus->lock, flags);
> +                       aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD,
> +                                     ASPEED_I2C_CMD_REG);
> +                       reinit_completion(&bus->cmd_complete);
> +                       spin_unlock_irqrestore(&bus->lock, flags);
> +
> +                       time_left = wait_for_completion_interruptible_timeout(
> +                                       &bus->cmd_complete,
> +                                       bus->adap.timeout * HZ);
> +                       if (time_left == 0)
> +                               return -ETIMEDOUT;
> +               }
> +       }
> +
> +       spin_lock_irqsave(&bus->lock, flags);
> +       aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD, ASPEED_I2C_CMD_REG);
> +       reinit_completion(&bus->cmd_complete);
> +       spin_unlock_irqrestore(&bus->lock, flags);
> +
> +       time_left = wait_for_completion_interruptible_timeout(
> +                       &bus->cmd_complete, bus->adap.timeout * HZ);
> +       if (time_left == 0)
> +               return -ETIMEDOUT;
> +
> +       /* If nothing went wrong, return number of messages transferred. */
> +       if (ret < 0)
> +               return ret;
> +       else
> +               return i;
> +}
> +
> +static u32 aspeed_i2c_functionality(struct i2c_adapter *adap)
> +{
> +       return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
> +}
> +
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +static int aspeed_i2c_reg_slave(struct i2c_client *client)
> +{
> +       struct aspeed_i2c_bus *bus;
> +       unsigned long flags;
> +       u32 addr_reg_val;
> +       u32 func_ctrl_reg_val;
> +
> +       bus = client->adapter->algo_data;
> +       spin_lock_irqsave(&bus->lock, flags);
> +       if (bus->slave) {
> +               spin_unlock_irqrestore(&bus->lock, flags);
> +               return -EINVAL;
> +       }
> +
> +       /* Set slave addr. */
> +       addr_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_DEV_ADDR_REG);
> +       addr_reg_val &= ~ASPEED_I2CD_DEV_ADDR_MASK;
> +       addr_reg_val |= client->addr & ASPEED_I2CD_DEV_ADDR_MASK;
> +       aspeed_i2c_write(bus, addr_reg_val, ASPEED_I2C_DEV_ADDR_REG);
> +
> +       /* Switch from master mode to slave mode. */
> +       func_ctrl_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG);
> +       func_ctrl_reg_val &= ~ASPEED_I2CD_MASTER_EN;
> +       func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN;
> +       aspeed_i2c_write(bus, func_ctrl_reg_val, ASPEED_I2C_FUN_CTRL_REG);
> +
> +       bus->slave = client;
> +       bus->slave_state = ASPEED_I2C_SLAVE_STOP;
> +       spin_unlock_irqrestore(&bus->lock, flags);
> +       return 0;
> +}
> +
> +static int aspeed_i2c_unreg_slave(struct i2c_client *client)
> +{
> +       struct aspeed_i2c_bus *bus = client->adapter->algo_data;
> +       unsigned long flags;
> +       u32 func_ctrl_reg_val;
> +
> +       spin_lock_irqsave(&bus->lock, flags);
> +       if (!bus->slave) {
> +               spin_unlock_irqrestore(&bus->lock, flags);
> +               return -EINVAL;
> +       }
> +
> +       /* Switch from slave mode to master mode. */
> +       func_ctrl_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG);
> +       func_ctrl_reg_val &= ~ASPEED_I2CD_SLAVE_EN;
> +       func_ctrl_reg_val |= ASPEED_I2CD_MASTER_EN;
> +       aspeed_i2c_write(bus, func_ctrl_reg_val, ASPEED_I2C_FUN_CTRL_REG);
> +
> +       bus->slave = NULL;
> +       spin_unlock_irqrestore(&bus->lock, flags);
> +       return 0;
> +}
> +#endif
> +
> +static const struct i2c_algorithm aspeed_i2c_algo = {
> +       .master_xfer    = aspeed_i2c_master_xfer,
> +       .functionality  = aspeed_i2c_functionality,
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +       .reg_slave      = aspeed_i2c_reg_slave,
> +       .unreg_slave    = aspeed_i2c_unreg_slave,
> +#endif
> +};
> +
> +static u32 aspeed_i2c_get_clk_reg_val(u32 divider_ratio)
> +{
> +       unsigned int inc = 0, div;
> +       u32 scl_low, scl_high, data;
> +
> +       for (div = 0; divider_ratio >= 16; div++) {
> +               inc |= (divider_ratio & 1);
> +               divider_ratio >>= 1;
> +       }
> +       divider_ratio += inc;
> +       scl_low = (divider_ratio >> 1) - 1;
> +       scl_high = divider_ratio - scl_low - 2;
> +       data = 0x77700300 | (scl_high << 16) | (scl_low << 12) | div;
> +       return data;
> +}
> +
> +static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus,
> +                           struct platform_device *pdev)
> +{
> +       struct clk *pclk;
> +       u32 clk_freq;
> +       u32 divider_ratio;
> +       int ret;
> +
> +       pclk = devm_clk_get(&pdev->dev, NULL);
> +       if (IS_ERR(pclk)) {
> +               dev_err(&pdev->dev, "clk_get failed\n");
> +               return PTR_ERR(pclk);
> +       }
> +       ret = of_property_read_u32(pdev->dev.of_node,
> +                       "clock-frequency", &clk_freq);
> +       if (ret < 0) {
> +               dev_err(&pdev->dev,
> +                               "Could not read clock-frequency property\n");
> +               clk_freq = 100000;
> +       }
> +       divider_ratio = clk_get_rate(pclk) / clk_freq;
> +       /* We just need the clock rate, we don't actually use the clk object. */
> +       devm_clk_put(&pdev->dev, pclk);
> +
> +       /* Set AC Timing */
> +       if (clk_freq / 1000 > 400) {
> +               aspeed_i2c_write(bus, aspeed_i2c_read(bus,
> +                                                     ASPEED_I2C_FUN_CTRL_REG) |
> +                               ASPEED_I2CD_M_HIGH_SPEED_EN |
> +                               ASPEED_I2CD_M_SDA_DRIVE_1T_EN |
> +                               ASPEED_I2CD_SDA_DRIVE_1T_EN,
> +                               ASPEED_I2C_FUN_CTRL_REG);
> +
> +               aspeed_i2c_write(bus, 0x3, ASPEED_I2C_AC_TIMING_REG2);
> +               aspeed_i2c_write(bus, aspeed_i2c_get_clk_reg_val(divider_ratio),
> +                             ASPEED_I2C_AC_TIMING_REG1);
> +       } else {
> +               aspeed_i2c_write(bus, aspeed_i2c_get_clk_reg_val(divider_ratio),
> +                             ASPEED_I2C_AC_TIMING_REG1);
> +               aspeed_i2c_write(bus, ASPEED_NO_TIMEOUT_CTRL,
> +                                ASPEED_I2C_AC_TIMING_REG2);
> +       }
> +
> +       return 0;
> +}
> +
> +static void noop(struct irq_data *data) { }
> +
> +static struct irq_chip aspeed_i2c_irqchip = {
> +       .name           = "ast-i2c",
> +       .irq_unmask     = noop,
> +       .irq_mask       = noop,
> +};
> +
> +static int aspeed_i2c_probe_bus(struct platform_device *pdev)
> +{
> +       struct aspeed_i2c_bus *bus;
> +       struct aspeed_i2c_controller *controller =
> +                       dev_get_drvdata(pdev->dev.parent);
> +       struct resource *res;
> +       int ret, irq;
> +       u32 hwirq;
> +
> +       bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
> +       if (!bus)
> +               return -ENOMEM;
> +
> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       bus->base = devm_ioremap_resource(&pdev->dev, res);
> +       if (IS_ERR(bus->base))
> +               return PTR_ERR(bus->base);
> +
> +       bus->irq = platform_get_irq(pdev, 0);
> +       if (bus->irq < 0)
> +               return -ENXIO;
> +       ret = of_property_read_u32(pdev->dev.of_node, "interrupts", &hwirq);
> +       if (ret < 0) {
> +               dev_err(&pdev->dev, "no I2C 'interrupts' property\n");
> +               return -ENXIO;
> +       }
> +       irq = irq_create_mapping(controller->irq_domain, hwirq);
> +       irq_set_chip_data(irq, controller);
> +       irq_set_chip_and_handler(irq, &aspeed_i2c_irqchip, handle_simple_irq);
> +       ret = devm_request_irq(&pdev->dev, bus->irq, aspeed_i2c_bus_irq,
> +                       0, dev_name(&pdev->dev), bus);
> +       if (ret) {
> +               dev_err(&pdev->dev, "failed to request interrupt\n");
> +               return -ENXIO;
> +       }
> +
> +       /* Initialize the I2C adapter */
> +       spin_lock_init(&bus->lock);
> +       init_completion(&bus->cmd_complete);
> +       bus->adap.owner = THIS_MODULE;
> +       bus->adap.retries = 0;
> +       bus->adap.timeout = 5;
> +       bus->adap.algo = &aspeed_i2c_algo;
> +       bus->adap.algo_data = bus;
> +       bus->adap.dev.parent = &pdev->dev;
> +       bus->adap.dev.of_node = pdev->dev.of_node;
> +       snprintf(bus->adap.name, sizeof(bus->adap.name), "Aspeed i2c");
> +
> +       bus->dev = &pdev->dev;
> +
> +       /* reset device: disable master & slave functions */
> +       aspeed_i2c_write(bus, 0, ASPEED_I2C_FUN_CTRL_REG);
> +
> +       ret = aspeed_i2c_init_clk(bus, pdev);
> +       if (ret < 0)
> +               return ret;
> +
> +       /* Enable Master Mode */
> +       aspeed_i2c_write(bus, aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG) |
> +                     ASPEED_I2CD_MASTER_EN |
> +                     ASPEED_I2CD_MULTI_MASTER_DIS, ASPEED_I2C_FUN_CTRL_REG);
> +
> +       /* Set interrupt generation of I2C controller */
> +       aspeed_i2c_write(bus, ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |
> +                       ASPEED_I2CD_INTR_BUS_RECOVER_DONE |
> +                       ASPEED_I2CD_INTR_SCL_TIMEOUT |
> +                       ASPEED_I2CD_INTR_ABNORMAL |
> +                       ASPEED_I2CD_INTR_NORMAL_STOP |
> +                       ASPEED_I2CD_INTR_ARBIT_LOSS |
> +                       ASPEED_I2CD_INTR_RX_DONE |
> +                       ASPEED_I2CD_INTR_TX_NAK |
> +                       ASPEED_I2CD_INTR_TX_ACK,
> +                       ASPEED_I2C_INTR_CTRL_REG);
> +
> +       ret = i2c_add_adapter(&bus->adap);
> +       if (ret < 0)
> +               return -ENXIO;
> +
> +       platform_set_drvdata(pdev, bus);
> +
> +       dev_info(bus->dev, "i2c bus %d registered, irq %d\n",
> +                       bus->adap.nr, bus->irq);
> +
> +       return 0;
> +}
> +
> +static int aspeed_i2c_remove_bus(struct platform_device *pdev)
> +{
> +       struct aspeed_i2c_bus *bus = platform_get_drvdata(pdev);
> +
> +       i2c_del_adapter(&bus->adap);
> +       return 0;
> +}
> +
> +static const struct of_device_id aspeed_i2c_bus_of_table[] = {
> +       { .compatible = "aspeed,ast2400-i2c-bus", },
> +       { .compatible = "aspeed,ast2500-i2c-bus", },
> +       { },
> +};
> +MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table);
> +
> +static struct platform_driver aspeed_i2c_bus_driver = {
> +       .probe          = aspeed_i2c_probe_bus,
> +       .remove         = aspeed_i2c_remove_bus,
> +       .driver         = {
> +               .name           = "ast-i2c-bus",
> +               .of_match_table = aspeed_i2c_bus_of_table,
> +       },
> +};
> +
> +static void aspeed_i2c_controller_irq(struct irq_desc *desc)
> +{
> +       struct aspeed_i2c_controller *c = irq_desc_get_handler_data(desc);
> +       unsigned long p, status;
> +       unsigned int bus_irq;
> +
> +       status = readl(c->base);
> +       for_each_set_bit(p, &status, ASPEED_I2C_NUM_BUS) {
> +               bus_irq = irq_find_mapping(c->irq_domain, p);
> +               generic_handle_irq(bus_irq);
> +       }
> +}
> +
> +static int aspeed_i2c_probe_controller(struct platform_device *pdev)
> +{
> +       struct aspeed_i2c_controller *controller;
> +       struct device_node *np;
> +       struct resource *res;
> +
> +       controller = kzalloc(sizeof(*controller), GFP_KERNEL);
> +       if (!controller)
> +               return -ENOMEM;
> +
> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       controller->base = devm_ioremap_resource(&pdev->dev, res);
> +       if (IS_ERR(controller->base))
> +               return PTR_ERR(controller->base);
> +
> +       controller->irq = platform_get_irq(pdev, 0);
> +       if (controller->irq < 0)
> +               return -ENXIO;
> +
> +       controller->irq_domain = irq_domain_add_linear(pdev->dev.of_node,
> +                       ASPEED_I2C_NUM_BUS, &irq_domain_simple_ops, NULL);
> +       if (!controller->irq_domain)
> +               return -ENXIO;
> +       controller->irq_domain->name = "ast-i2c-domain";
> +
> +       irq_set_chained_handler_and_data(controller->irq,
> +                       aspeed_i2c_controller_irq, controller);
> +
> +       controller->dev = &pdev->dev;
> +
> +       platform_set_drvdata(pdev, controller);
> +
> +       dev_info(controller->dev, "i2c controller registered, irq %d\n",
> +                       controller->irq);
> +
> +       for_each_child_of_node(pdev->dev.of_node, np) {
> +               of_platform_device_create(np, NULL, &pdev->dev);
> +               of_node_put(np);
> +       }
> +
> +       return 0;
> +}
> +
> +static int aspeed_i2c_remove_controller(struct platform_device *pdev)
> +{
> +       struct aspeed_i2c_controller *controller = platform_get_drvdata(pdev);
> +
> +       irq_domain_remove(controller->irq_domain);
> +       return 0;
> +}
> +
> +static const struct of_device_id aspeed_i2c_controller_of_table[] = {
> +       { .compatible = "aspeed,ast2400-i2c-controller", },
> +       { .compatible = "aspeed,ast2500-i2c-controller", },
> +       { },
> +};
> +MODULE_DEVICE_TABLE(of, aspeed_i2c_controller_of_table);
> +
> +static struct platform_driver aspeed_i2c_controller_driver = {
> +       .probe          = aspeed_i2c_probe_controller,
> +       .remove         = aspeed_i2c_remove_controller,
> +       .driver         = {
> +               .name           = "ast-i2c-controller",
> +               .of_match_table = aspeed_i2c_controller_of_table,
> +       },
> +};
> +
> +static int __init aspeed_i2c_driver_init(void)
> +{
> +       int ret;
> +
> +       ret = platform_driver_register(&aspeed_i2c_controller_driver);
> +       if (ret < 0)
> +               return ret;
> +       return platform_driver_register(&aspeed_i2c_bus_driver);
> +}
> +module_init(aspeed_i2c_driver_init);
> +
> +static void __exit aspeed_i2c_driver_exit(void)
> +{
> +       platform_driver_unregister(&aspeed_i2c_bus_driver);
> +       platform_driver_unregister(&aspeed_i2c_controller_driver);
> +}
> +module_exit(aspeed_i2c_driver_exit);
> +
> +MODULE_AUTHOR("Brendan Higgins <brendanhiggins@google.com>");
> +MODULE_DESCRIPTION("Aspeed I2C Bus Driver");
> +MODULE_LICENSE("GPL");
> --
> 2.8.0.rc3.226.g39d4020
>

Re: [PATCH v4 1/2] i2c: aspeed: added driver for Aspeed I2C

[Cédric Le Goater]

Hello Brendan,

A few comments below,

On 11/05/2016 02:58 AM, Brendan Higgins wrote:
> Added initial master and slave support for Aspeed I2C controller.
> Supports fourteen busses present in ast24xx and ast25xx BMC SoCs by
> Aspeed.
> 
> Signed-off-by: Brendan Higgins <brendanhiggins-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
> ---
> Changes for v2:
>   - Added single module_init (multiple was breaking some builds).
> Changes for v3:
>   - Removed "bus" device tree param; now extracted from bus address offset
> Changes for v4:
>   - I2C adapter number is now generated dynamically unless specified in alias.
> ---
>  drivers/i2c/busses/Kconfig      |  10 +
>  drivers/i2c/busses/Makefile     |   1 +
>  drivers/i2c/busses/i2c-aspeed.c | 807 ++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 818 insertions(+)
>  create mode 100644 drivers/i2c/busses/i2c-aspeed.c
> 
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index d252276..b6caa5d 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -1009,6 +1009,16 @@ config I2C_RCAR
>  	  This driver can also be built as a module.  If so, the module
>  	  will be called i2c-rcar.
>  
> +config I2C_ASPEED
> +	tristate "Aspeed AST2xxx SoC I2C Controller"
> +	depends on ARCH_ASPEED
> +	help
> +	  If you say yes to this option, support will be included for the
> +	  Aspeed AST2xxx SoC I2C controller.
> +
> +	  This driver can also be built as a module.  If so, the module
> +	  will be called i2c-aspeed.
> +
>  comment "External I2C/SMBus adapter drivers"
>  
>  config I2C_DIOLAN_U2C
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index 29764cc..826e780 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -99,6 +99,7 @@ obj-$(CONFIG_I2C_XILINX)	+= i2c-xiic.o
>  obj-$(CONFIG_I2C_XLR)		+= i2c-xlr.o
>  obj-$(CONFIG_I2C_XLP9XX)	+= i2c-xlp9xx.o
>  obj-$(CONFIG_I2C_RCAR)		+= i2c-rcar.o
> +obj-$(CONFIG_I2C_ASPEED)	+= i2c-aspeed.o
>  
>  # External I2C/SMBus adapter drivers
>  obj-$(CONFIG_I2C_DIOLAN_U2C)	+= i2c-diolan-u2c.o
> diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
> new file mode 100644
> index 0000000..88e078a
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-aspeed.c
> @@ -0,0 +1,807 @@
> +/*
> + *  I2C adapter for the ASPEED I2C bus.
> + *
> + *  Copyright (C) 2012-2020  ASPEED Technology Inc.
> + *  Copyright 2016 IBM Corporation
> + *  Copyright 2016 Google, Inc.
> + *
> + *  This program is free software; you can redistribute it and/or modify
> + *  it under the terms of the GNU General Public License version 2 as
> + *  published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/errno.h>
> +#include <linux/interrupt.h>
> +#include <linux/completion.h>
> +#include <linux/slab.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/err.h>
> +#include <linux/clk.h>
> +
> +/* I2C Register */
> +#define ASPEED_I2C_FUN_CTRL_REG				0x00
> +#define ASPEED_I2C_AC_TIMING_REG1			0x04
> +#define ASPEED_I2C_AC_TIMING_REG2			0x08
> +#define ASPEED_I2C_INTR_CTRL_REG			0x0c
> +#define ASPEED_I2C_INTR_STS_REG				0x10
> +#define ASPEED_I2C_CMD_REG				0x14
> +#define ASPEED_I2C_DEV_ADDR_REG				0x18
> +#define ASPEED_I2C_BYTE_BUF_REG				0x20
> +#define ASPEED_I2C_OFFSET_START				0x40
> +#define ASPEED_I2C_OFFSET_INCREMENT			0x40
> +
> +#define ASPEED_I2C_NUM_BUS 14
> +
> +/* Global Register Definition */
> +/* 0x00 : I2C Interrupt Status Register  */
> +/* 0x08 : I2C Interrupt Target Assignment  */
> +
> +/* Device Register Definition */
> +/* 0x00 : I2CD Function Control Register  */
> +#define ASPEED_I2CD_MULTI_MASTER_DIS			BIT(15)
> +#define ASPEED_I2CD_SDA_DRIVE_1T_EN			BIT(8)
> +#define ASPEED_I2CD_M_SDA_DRIVE_1T_EN			BIT(7)
> +#define ASPEED_I2CD_M_HIGH_SPEED_EN			BIT(6)
> +#define ASPEED_I2CD_SLAVE_EN				BIT(1)
> +#define ASPEED_I2CD_MASTER_EN				BIT(0)
> +
> +/* 0x08 : I2CD Clock and AC Timing Control Register #2 */
> +#define ASPEED_NO_TIMEOUT_CTRL				0
> +
> +
> +/* 0x0c : I2CD Interrupt Control Register &
> + * 0x10 : I2CD Interrupt Status Register
> + *
> + * These share bit definitions, so use the same values for the enable &
> + * status bits.
> + */
> +#define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT			BIT(14)
> +#define ASPEED_I2CD_INTR_BUS_RECOVER_DONE		BIT(13)
> +#define ASPEED_I2CD_INTR_SLAVE_MATCH			BIT(7)
> +#define ASPEED_I2CD_INTR_SCL_TIMEOUT			BIT(6)
> +#define ASPEED_I2CD_INTR_ABNORMAL			BIT(5)
> +#define ASPEED_I2CD_INTR_NORMAL_STOP			BIT(4)
> +#define ASPEED_I2CD_INTR_ARBIT_LOSS			BIT(3)
> +#define ASPEED_I2CD_INTR_RX_DONE			BIT(2)
> +#define ASPEED_I2CD_INTR_TX_NAK				BIT(1)
> +#define ASPEED_I2CD_INTR_TX_ACK				BIT(0)
> +
> +/* 0x14 : I2CD Command/Status Register   */
> +#define ASPEED_I2CD_SCL_LINE_STS			BIT(18)
> +#define ASPEED_I2CD_SDA_LINE_STS			BIT(17)
> +#define ASPEED_I2CD_BUS_BUSY_STS			BIT(16)
> +#define ASPEED_I2CD_BUS_RECOVER_CMD			BIT(11)
> +
> +/* Command Bit */
> +#define ASPEED_I2CD_M_STOP_CMD				BIT(5)
> +#define ASPEED_I2CD_M_S_RX_CMD_LAST			BIT(4)
> +#define ASPEED_I2CD_M_RX_CMD				BIT(3)
> +#define ASPEED_I2CD_S_TX_CMD				BIT(2)
> +#define ASPEED_I2CD_M_TX_CMD				BIT(1)
> +#define ASPEED_I2CD_M_START_CMD				BIT(0)
> +
> +/* 0x18 : I2CD Slave Device Address Register   */
> +#define ASPEED_I2CD_DEV_ADDR_MASK			GENMASK(6, 0)
> +
> +enum aspeed_i2c_slave_state {
> +	ASPEED_I2C_SLAVE_START,
> +	ASPEED_I2C_SLAVE_READ_REQUESTED,
> +	ASPEED_I2C_SLAVE_READ_PROCESSED,
> +	ASPEED_I2C_SLAVE_WRITE_REQUESTED,
> +	ASPEED_I2C_SLAVE_WRITE_RECEIVED,
> +	ASPEED_I2C_SLAVE_STOP,
> +};
> +
> +struct aspeed_i2c_bus {
> +	struct i2c_adapter		adap;
> +	struct device			*dev;
> +	void __iomem			*base;
> +	spinlock_t			lock;
> +	struct completion		cmd_complete;
> +	int				irq;
> +	/* Transaction state. */
> +	struct i2c_msg			*msg;
> +	int				msg_pos;
> +	u32				cmd_err;
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +	struct i2c_client		*slave;
> +	enum aspeed_i2c_slave_state	slave_state;
> +#endif
> +};
> +
> +struct aspeed_i2c_controller {
> +	struct device		*dev;
> +	void __iomem		*base;
> +	int			irq;
> +	struct irq_domain	*irq_domain;
> +};
> +
> +static inline void aspeed_i2c_write(struct aspeed_i2c_bus *bus, u32 val,
> +				    u32 reg)
> +{
> +	writel(val, bus->base + reg);
> +}
> +
> +static inline u32 aspeed_i2c_read(struct aspeed_i2c_bus *bus, u32 reg)
> +{
> +	return readl(bus->base + reg);
> +}
> +
> +static u8 aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus)
> +{
> +	u32 command;
> +	unsigned long time_left;
> +	unsigned long flags;
> +	int ret = 0;
> +
> +	spin_lock_irqsave(&bus->lock, flags);
> +	command = aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG);
> +	/* Bus is idle: no recovery needed. */
> +	if ((command & ASPEED_I2CD_SDA_LINE_STS) &&
> +	    (command & ASPEED_I2CD_SCL_LINE_STS))
> +		goto out;
> +
> +	dev_dbg(bus->dev, "bus hung (state %x), attempting recovery\n",
> +		command);
> +
> +	/* Bus held: put bus in stop state. */
> +	if ((command & ASPEED_I2CD_SDA_LINE_STS) &&
> +	    !(command & ASPEED_I2CD_SCL_LINE_STS)) {
> +		aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD,
> +				 ASPEED_I2C_CMD_REG);
> +		reinit_completion(&bus->cmd_complete);
> +		spin_unlock_irqrestore(&bus->lock, flags);
> +
> +		time_left = wait_for_completion_interruptible_timeout(
> +				&bus->cmd_complete, bus->adap.timeout * HZ);
> +
> +		spin_lock_irqsave(&bus->lock, flags);
> +		if (time_left == 0)
> +			ret = -ETIMEDOUT;
> +		else if (bus->cmd_err)
> +			ret = -EIO;
> +	/* Bus error. */
> +	} else if (!(command & ASPEED_I2CD_SDA_LINE_STS)) {
> +		aspeed_i2c_write(bus, ASPEED_I2CD_BUS_RECOVER_CMD,
> +				 ASPEED_I2C_CMD_REG);
> +		reinit_completion(&bus->cmd_complete);
> +		spin_unlock_irqrestore(&bus->lock, flags);
> +
> +		time_left = wait_for_completion_interruptible_timeout(
> +				&bus->cmd_complete, bus->adap.timeout * HZ);
> +
> +		spin_lock_irqsave(&bus->lock, flags);
> +		if (time_left == 0)
> +			ret = -ETIMEDOUT;
> +		else if (bus->cmd_err)
> +			ret = -EIO;
> +		/* Recovery failed. */
> +		else if (!(aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG) &
> +			   ASPEED_I2CD_SDA_LINE_STS))
> +			ret = -EIO;
> +	}
> +
> +out:
> +	spin_unlock_irqrestore(&bus->lock, flags);
> +	return ret;
> +}
> +
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
> +{
> +	bool irq_handled = true;
> +	u32 command;
> +	u32 irq_status;
> +	u32 status_ack = 0;
> +	u8 value;
> +	struct i2c_client *slave = bus->slave;
> +
> +	spin_lock(&bus->lock);
> +	if (!slave) {
> +		irq_handled = false;
> +		goto out;
> +	}
> +	command = aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG);
> +	irq_status = aspeed_i2c_read(bus, ASPEED_I2C_INTR_STS_REG);
> +
> +	/* Slave was requested, restart state machine. */
> +	if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) {
> +		status_ack |= ASPEED_I2CD_INTR_SLAVE_MATCH;
> +		bus->slave_state = ASPEED_I2C_SLAVE_START;
> +	}
> +	/* Slave is not currently active, irq was for someone else. */
> +	if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
> +		irq_handled = false;
> +		goto out;
> +	}
> +
> +	dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n",
> +		irq_status, command);
> +
> +	/* Slave was sent something. */
> +	if (irq_status & ASPEED_I2CD_INTR_RX_DONE) {
> +		value = aspeed_i2c_read(bus, ASPEED_I2C_BYTE_BUF_REG) >> 8;
> +		/* Handle address frame. */
> +		if (bus->slave_state == ASPEED_I2C_SLAVE_START) {
> +			if (value & 0x1)
> +				bus->slave_state =
> +						ASPEED_I2C_SLAVE_READ_REQUESTED;
> +			else
> +				bus->slave_state =
> +						ASPEED_I2C_SLAVE_WRITE_REQUESTED;
> +		}
> +		status_ack |= ASPEED_I2CD_INTR_RX_DONE;
> +	}
> +
> +	/* Slave was asked to stop. */
> +	if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
> +		status_ack |= ASPEED_I2CD_INTR_NORMAL_STOP;
> +		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
> +	}
> +	if (irq_status & ASPEED_I2CD_INTR_TX_NAK) {
> +		status_ack |= ASPEED_I2CD_INTR_TX_NAK;
> +		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
> +	}
> +
> +	if (bus->slave_state == ASPEED_I2C_SLAVE_READ_REQUESTED) {
> +		if (irq_status & ASPEED_I2CD_INTR_TX_ACK)
> +			dev_err(bus->dev, "Unexpected ACK on read request.\n");
> +		bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED;
> +
> +		i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
> +		aspeed_i2c_write(bus, value, ASPEED_I2C_BYTE_BUF_REG);
> +		aspeed_i2c_write(bus, ASPEED_I2CD_S_TX_CMD, ASPEED_I2C_CMD_REG);
> +	} else if (bus->slave_state == ASPEED_I2C_SLAVE_READ_PROCESSED) {
> +		status_ack |= ASPEED_I2CD_INTR_TX_ACK;
> +		if (!(irq_status & ASPEED_I2CD_INTR_TX_ACK))
> +			dev_err(bus->dev,
> +				"Expected ACK after processed read.\n");
> +		i2c_slave_event(slave, I2C_SLAVE_READ_PROCESSED, &value);
> +		aspeed_i2c_write(bus, value, ASPEED_I2C_BYTE_BUF_REG);
> +		aspeed_i2c_write(bus, ASPEED_I2CD_S_TX_CMD, ASPEED_I2C_CMD_REG);
> +	} else if (bus->slave_state == ASPEED_I2C_SLAVE_WRITE_REQUESTED) {
> +		bus->slave_state = ASPEED_I2C_SLAVE_WRITE_RECEIVED;
> +		i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
> +	} else if (bus->slave_state == ASPEED_I2C_SLAVE_WRITE_RECEIVED) {
> +		i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value);
> +	} else if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
> +		i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
> +	}
> +
> +	if (status_ack != irq_status)
> +		dev_err(bus->dev,
> +			"irq handled != irq. expected %x, but was %x\n",
> +			irq_status, status_ack);
> +	aspeed_i2c_write(bus, status_ack, ASPEED_I2C_INTR_STS_REG);
> +
> +out:
> +	spin_unlock(&bus->lock);
> +	return irq_handled;
> +}
> +#endif
> +
> +static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
> +{
> +	const u32 errs = ASPEED_I2CD_INTR_ARBIT_LOSS |
> +		ASPEED_I2CD_INTR_ABNORMAL |
> +		ASPEED_I2CD_INTR_SCL_TIMEOUT |
> +		ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |
> +		ASPEED_I2CD_INTR_TX_NAK;
> +	u32 irq_status;
> +
> +	spin_lock(&bus->lock);
> +	irq_status = aspeed_i2c_read(bus, ASPEED_I2C_INTR_STS_REG);
> +	bus->cmd_err = irq_status & errs;
> +
> +	dev_dbg(bus->dev, "master irq status 0x%08x\n", irq_status);
> +
> +	/* No message to transfer. */
> +	if (bus->cmd_err ||
> +	    (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) ||
> +	    (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE)) {
> +		complete(&bus->cmd_complete);
> +		goto out;
> +	} else if (!bus->msg || bus->msg_pos >= bus->msg->len)
> +		goto out;
> +
> +	if ((bus->msg->flags & I2C_M_RD) &&
> +	    (irq_status & ASPEED_I2CD_INTR_RX_DONE)) {
> +		bus->msg->buf[bus->msg_pos++] = aspeed_i2c_read(
> +				bus, ASPEED_I2C_BYTE_BUF_REG) >> 8;
> +		if (bus->msg_pos + 1 < bus->msg->len)
> +			aspeed_i2c_write(bus, ASPEED_I2CD_M_RX_CMD,
> +					 ASPEED_I2C_CMD_REG);
> +		else if (bus->msg_pos < bus->msg->len)
> +			aspeed_i2c_write(bus, ASPEED_I2CD_M_RX_CMD |
> +				      ASPEED_I2CD_M_S_RX_CMD_LAST,
> +				      ASPEED_I2C_CMD_REG);
> +	} else if (!(bus->msg->flags & I2C_M_RD) &&
> +		   (irq_status & ASPEED_I2CD_INTR_TX_ACK)) {
> +		aspeed_i2c_write(bus, bus->msg->buf[bus->msg_pos++],
> +			      ASPEED_I2C_BYTE_BUF_REG);
> +		aspeed_i2c_write(bus, ASPEED_I2CD_M_TX_CMD, ASPEED_I2C_CMD_REG);
> +	}

is it safe to start a new transaction when in a interrupt handler ? 

> +	/* Transmission complete: notify caller. */
> +	if (bus->msg_pos >= bus->msg->len)
> +		complete(&bus->cmd_complete);
> +out:
> +	aspeed_i2c_write(bus, irq_status, ASPEED_I2C_INTR_STS_REG);

so this is clearing the interrupt status just after having started
a new transaction on the bus. It looks unsafe to me as it could 
clear the status of the just started transaction.

> +	spin_unlock(&bus->lock);
> +	return true;
> +}
> +
> +static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
> +{
> +	struct aspeed_i2c_bus *bus = dev_id;
> +
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +	if (aspeed_i2c_slave_irq(bus)) {
> +		dev_dbg(bus->dev, "irq handled by slave.\n");
> +		return IRQ_HANDLED;
> +	}
> +#endif
> +	if (aspeed_i2c_master_irq(bus)) {
> +		dev_dbg(bus->dev, "irq handled by master.\n");
> +		return IRQ_HANDLED;
> +	}
> +	dev_err(bus->dev, "irq not handled properly!\n");
> +	return IRQ_HANDLED;
> +}
> +
> +static int aspeed_i2c_master_single_xfer(struct i2c_adapter *adap,
> +				      struct i2c_msg *msg)
> +{
> +	struct aspeed_i2c_bus *bus = adap->algo_data;
> +	unsigned long flags;
> +	u8 slave_addr;
> +	u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD;
> +	int ret = msg->len;
> +	unsigned long time_left;
> +
> +	spin_lock_irqsave(&bus->lock, flags);
> +	bus->msg = msg;
> +	bus->msg_pos = 0;
> +	slave_addr = msg->addr << 1;
> +	if (msg->flags & I2C_M_RD) {
> +		slave_addr |= 1;
> +		command |= ASPEED_I2CD_M_RX_CMD;
> +		if (msg->len == 1)
> +			command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
> +	}
> +	aspeed_i2c_write(bus, slave_addr, ASPEED_I2C_BYTE_BUF_REG);
> +	aspeed_i2c_write(bus, command, ASPEED_I2C_CMD_REG);
> +	reinit_completion(&bus->cmd_complete);
> +	spin_unlock_irqrestore(&bus->lock, flags);
> +
> +	time_left = wait_for_completion_interruptible_timeout(
> +			&bus->cmd_complete, bus->adap.timeout * HZ * msg->len);

Why do you multiply by * msg->len ? 

> +	if (time_left == 0)
> +		return -ETIMEDOUT;
> +
> +	spin_lock_irqsave(&bus->lock, flags);
> +	if (bus->cmd_err)
> +		ret = -EIO;
> +	bus->msg = NULL;
> +	spin_unlock_irqrestore(&bus->lock, flags);
> +
> +	return ret;
> +}
> +
> +static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
> +				  struct i2c_msg *msgs, int num)
> +{
> +	struct aspeed_i2c_bus *bus = adap->algo_data;
> +	int ret;
> +	int i;
> +	unsigned long flags;
> +	unsigned long time_left;
> +
> +	/* If bus is busy, attempt recovery. We assume a single master
> +	 * environment.
> +	 */
> +	if (aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG) &
> +	    ASPEED_I2CD_BUS_BUSY_STS) {
> +		ret = aspeed_i2c_recover_bus(bus);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	for (i = 0; i < num; i++) {
> +		ret = aspeed_i2c_master_single_xfer(adap, &msgs[i]);
> +		if (ret < 0)
> +			break;
> +		/* TODO: Support other forms of I2C protocol mangling. */
> +		if (msgs[i].flags & I2C_M_STOP) {
> +			spin_lock_irqsave(&bus->lock, flags);
> +			aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD,
> +				      ASPEED_I2C_CMD_REG);
> +			reinit_completion(&bus->cmd_complete);
> +			spin_unlock_irqrestore(&bus->lock, flags);
> +
> +			time_left = wait_for_completion_interruptible_timeout(
> +					&bus->cmd_complete,
> +					bus->adap.timeout * HZ);
> +			if (time_left == 0)
> +				return -ETIMEDOUT;
> +		}
> +	}
> +
> +	spin_lock_irqsave(&bus->lock, flags);
> +	aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD, ASPEED_I2C_CMD_REG);
> +	reinit_completion(&bus->cmd_complete);
> +	spin_unlock_irqrestore(&bus->lock, flags);
> +
> +	time_left = wait_for_completion_interruptible_timeout(
> +			&bus->cmd_complete, bus->adap.timeout * HZ);
> +	if (time_left == 0)
> +		return -ETIMEDOUT;
> +
> +	/* If nothing went wrong, return number of messages transferred. */
> +	if (ret < 0)
> +		return ret;
> +	else
> +		return i;
> +}
> +
> +static u32 aspeed_i2c_functionality(struct i2c_adapter *adap)
> +{
> +	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
> +}
> +
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +static int aspeed_i2c_reg_slave(struct i2c_client *client)
> +{
> +	struct aspeed_i2c_bus *bus;
> +	unsigned long flags;
> +	u32 addr_reg_val;
> +	u32 func_ctrl_reg_val;
> +
> +	bus = client->adapter->algo_data;
> +	spin_lock_irqsave(&bus->lock, flags);
> +	if (bus->slave) {
> +		spin_unlock_irqrestore(&bus->lock, flags);
> +		return -EINVAL;
> +	}
> +
> +	/* Set slave addr. */
> +	addr_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_DEV_ADDR_REG);
> +	addr_reg_val &= ~ASPEED_I2CD_DEV_ADDR_MASK;
> +	addr_reg_val |= client->addr & ASPEED_I2CD_DEV_ADDR_MASK;
> +	aspeed_i2c_write(bus, addr_reg_val, ASPEED_I2C_DEV_ADDR_REG);
> +
> +	/* Switch from master mode to slave mode. */
> +	func_ctrl_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG);
> +	func_ctrl_reg_val &= ~ASPEED_I2CD_MASTER_EN;
> +	func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN;
> +	aspeed_i2c_write(bus, func_ctrl_reg_val, ASPEED_I2C_FUN_CTRL_REG);
> +
> +	bus->slave = client;
> +	bus->slave_state = ASPEED_I2C_SLAVE_STOP;
> +	spin_unlock_irqrestore(&bus->lock, flags);
> +	return 0;
> +}
> +
> +static int aspeed_i2c_unreg_slave(struct i2c_client *client)
> +{
> +	struct aspeed_i2c_bus *bus = client->adapter->algo_data;
> +	unsigned long flags;
> +	u32 func_ctrl_reg_val;
> +
> +	spin_lock_irqsave(&bus->lock, flags);
> +	if (!bus->slave) {
> +		spin_unlock_irqrestore(&bus->lock, flags);
> +		return -EINVAL;
> +	}
> +
> +	/* Switch from slave mode to master mode. */
> +	func_ctrl_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG);
> +	func_ctrl_reg_val &= ~ASPEED_I2CD_SLAVE_EN;
> +	func_ctrl_reg_val |= ASPEED_I2CD_MASTER_EN;
> +	aspeed_i2c_write(bus, func_ctrl_reg_val, ASPEED_I2C_FUN_CTRL_REG);
> +
> +	bus->slave = NULL;
> +	spin_unlock_irqrestore(&bus->lock, flags);
> +	return 0;
> +}
> +#endif
> +
> +static const struct i2c_algorithm aspeed_i2c_algo = {
> +	.master_xfer	= aspeed_i2c_master_xfer,
> +	.functionality	= aspeed_i2c_functionality,
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +	.reg_slave	= aspeed_i2c_reg_slave,
> +	.unreg_slave	= aspeed_i2c_unreg_slave,
> +#endif
> +};
> +
> +static u32 aspeed_i2c_get_clk_reg_val(u32 divider_ratio)
> +{
> +	unsigned int inc = 0, div;
> +	u32 scl_low, scl_high, data;
> +
> +	for (div = 0; divider_ratio >= 16; div++) {
> +		inc |= (divider_ratio & 1);
> +		divider_ratio >>= 1;
> +	}
> +	divider_ratio += inc;
> +	scl_low = (divider_ratio >> 1) - 1;
> +	scl_high = divider_ratio - scl_low - 2;
> +	data = 0x77700300 | (scl_high << 16) | (scl_low << 12) | div;
> +	return data;
> +}
> +
> +static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus,
> +			    struct platform_device *pdev)
> +{
> +	struct clk *pclk;
> +	u32 clk_freq;
> +	u32 divider_ratio;
> +	int ret;
> +
> +	pclk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(pclk)) {
> +		dev_err(&pdev->dev, "clk_get failed\n");
> +		return PTR_ERR(pclk);
> +	}
> +	ret = of_property_read_u32(pdev->dev.of_node,
> +			"clock-frequency", &clk_freq);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev,
> +				"Could not read clock-frequency property\n");
> +		clk_freq = 100000;
> +	}
> +	divider_ratio = clk_get_rate(pclk) / clk_freq;
> +	/* We just need the clock rate, we don't actually use the clk object. */
> +	devm_clk_put(&pdev->dev, pclk);
> +
> +	/* Set AC Timing */
> +	if (clk_freq / 1000 > 400) {
> +		aspeed_i2c_write(bus, aspeed_i2c_read(bus,
> +						      ASPEED_I2C_FUN_CTRL_REG) |
> +				ASPEED_I2CD_M_HIGH_SPEED_EN |
> +				ASPEED_I2CD_M_SDA_DRIVE_1T_EN |
> +				ASPEED_I2CD_SDA_DRIVE_1T_EN,
> +				ASPEED_I2C_FUN_CTRL_REG);
> +
> +		aspeed_i2c_write(bus, 0x3, ASPEED_I2C_AC_TIMING_REG2);
> +		aspeed_i2c_write(bus, aspeed_i2c_get_clk_reg_val(divider_ratio),
> +			      ASPEED_I2C_AC_TIMING_REG1);
> +	} else {
> +		aspeed_i2c_write(bus, aspeed_i2c_get_clk_reg_val(divider_ratio),
> +			      ASPEED_I2C_AC_TIMING_REG1);
> +		aspeed_i2c_write(bus, ASPEED_NO_TIMEOUT_CTRL,
> +				 ASPEED_I2C_AC_TIMING_REG2);
> +	}
> +
> +	return 0;
> +}
> +
> +static void noop(struct irq_data *data) { }
> +
> +static struct irq_chip aspeed_i2c_irqchip = {
> +	.name		= "ast-i2c",
> +	.irq_unmask	= noop,
> +	.irq_mask	= noop,
> +};
> +
> +static int aspeed_i2c_probe_bus(struct platform_device *pdev)
> +{
> +	struct aspeed_i2c_bus *bus;
> +	struct aspeed_i2c_controller *controller =
> +			dev_get_drvdata(pdev->dev.parent);
> +	struct resource *res;
> +	int ret, irq;
> +	u32 hwirq;
> +
> +	bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
> +	if (!bus)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	bus->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(bus->base))
> +		return PTR_ERR(bus->base);
> +
> +	bus->irq = platform_get_irq(pdev, 0);
> +	if (bus->irq < 0)
> +		return -ENXIO;
> +	ret = of_property_read_u32(pdev->dev.of_node, "interrupts", &hwirq);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "no I2C 'interrupts' property\n");
> +		return -ENXIO;
> +	}
> +	irq = irq_create_mapping(controller->irq_domain, hwirq);
> +	irq_set_chip_data(irq, controller);
> +	irq_set_chip_and_handler(irq, &aspeed_i2c_irqchip, handle_simple_irq);
> +	ret = devm_request_irq(&pdev->dev, bus->irq, aspeed_i2c_bus_irq,
> +			0, dev_name(&pdev->dev), bus);
> +	if (ret) {
> +		dev_err(&pdev->dev, "failed to request interrupt\n");
> +		return -ENXIO;
> +	}
> +
> +	/* Initialize the I2C adapter */
> +	spin_lock_init(&bus->lock);
> +	init_completion(&bus->cmd_complete);
> +	bus->adap.owner = THIS_MODULE;
> +	bus->adap.retries = 0;
> +	bus->adap.timeout = 5;
> +	bus->adap.algo = &aspeed_i2c_algo;
> +	bus->adap.algo_data = bus;
> +	bus->adap.dev.parent = &pdev->dev;
> +	bus->adap.dev.of_node = pdev->dev.of_node;
> +	snprintf(bus->adap.name, sizeof(bus->adap.name), "Aspeed i2c");
> +
> +	bus->dev = &pdev->dev;
> +
> +	/* reset device: disable master & slave functions */
> +	aspeed_i2c_write(bus, 0, ASPEED_I2C_FUN_CTRL_REG);
> +
> +	ret = aspeed_i2c_init_clk(bus, pdev);
> +	if (ret < 0)
> +		return ret;
> +
> +	/* Enable Master Mode */
> +	aspeed_i2c_write(bus, aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG) |
> +		      ASPEED_I2CD_MASTER_EN |
> +		      ASPEED_I2CD_MULTI_MASTER_DIS, ASPEED_I2C_FUN_CTRL_REG);
> +
> +	/* Set interrupt generation of I2C controller */
> +	aspeed_i2c_write(bus, ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |
> +			ASPEED_I2CD_INTR_BUS_RECOVER_DONE |
> +			ASPEED_I2CD_INTR_SCL_TIMEOUT |
> +			ASPEED_I2CD_INTR_ABNORMAL |
> +			ASPEED_I2CD_INTR_NORMAL_STOP |
> +			ASPEED_I2CD_INTR_ARBIT_LOSS |
> +			ASPEED_I2CD_INTR_RX_DONE |
> +			ASPEED_I2CD_INTR_TX_NAK |
> +			ASPEED_I2CD_INTR_TX_ACK,
> +			ASPEED_I2C_INTR_CTRL_REG);
> +
> +	ret = i2c_add_adapter(&bus->adap);
> +	if (ret < 0)
> +		return -ENXIO;
> +
> +	platform_set_drvdata(pdev, bus);
> +
> +	dev_info(bus->dev, "i2c bus %d registered, irq %d\n",
> +			bus->adap.nr, bus->irq);
> +
> +	return 0;
> +}
> +
> +static int aspeed_i2c_remove_bus(struct platform_device *pdev)
> +{
> +	struct aspeed_i2c_bus *bus = platform_get_drvdata(pdev);
> +
> +	i2c_del_adapter(&bus->adap);
> +	return 0;
> +}
> +
> +static const struct of_device_id aspeed_i2c_bus_of_table[] = {
> +	{ .compatible = "aspeed,ast2400-i2c-bus", },
> +	{ .compatible = "aspeed,ast2500-i2c-bus", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table);
> +
> +static struct platform_driver aspeed_i2c_bus_driver = {
> +	.probe		= aspeed_i2c_probe_bus,
> +	.remove		= aspeed_i2c_remove_bus,
> +	.driver		= {
> +		.name		= "ast-i2c-bus",
> +		.of_match_table	= aspeed_i2c_bus_of_table,
> +	},
> +};
> +
> +static void aspeed_i2c_controller_irq(struct irq_desc *desc)
> +{
> +	struct aspeed_i2c_controller *c = irq_desc_get_handler_data(desc);
> +	unsigned long p, status;
> +	unsigned int bus_irq;
> +
> +	status = readl(c->base);
> +	for_each_set_bit(p, &status, ASPEED_I2C_NUM_BUS) {
> +		bus_irq = irq_find_mapping(c->irq_domain, p);
> +		generic_handle_irq(bus_irq);
> +	}
> +}
> +
> +static int aspeed_i2c_probe_controller(struct platform_device *pdev)
> +{
> +	struct aspeed_i2c_controller *controller;
> +	struct device_node *np;
> +	struct resource *res;
> +
> +	controller = kzalloc(sizeof(*controller), GFP_KERNEL);

use devm_kzalloc() may be ? 

C.

> +	if (!controller)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	controller->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(controller->base))
> +		return PTR_ERR(controller->base);
> +
> +	controller->irq = platform_get_irq(pdev, 0);
> +	if (controller->irq < 0)
> +		return -ENXIO;
> +
> +	controller->irq_domain = irq_domain_add_linear(pdev->dev.of_node,
> +			ASPEED_I2C_NUM_BUS, &irq_domain_simple_ops, NULL);
> +	if (!controller->irq_domain)
> +		return -ENXIO;
> +	controller->irq_domain->name = "ast-i2c-domain";
> +
> +	irq_set_chained_handler_and_data(controller->irq,
> +			aspeed_i2c_controller_irq, controller);
> +
> +	controller->dev = &pdev->dev;
> +
> +	platform_set_drvdata(pdev, controller);
> +
> +	dev_info(controller->dev, "i2c controller registered, irq %d\n",
> +			controller->irq);
> +
> +	for_each_child_of_node(pdev->dev.of_node, np) {
> +		of_platform_device_create(np, NULL, &pdev->dev);
> +		of_node_put(np);
> +	}
> +
> +	return 0;
> +}
> +
> +static int aspeed_i2c_remove_controller(struct platform_device *pdev)
> +{
> +	struct aspeed_i2c_controller *controller = platform_get_drvdata(pdev);
> +
> +	irq_domain_remove(controller->irq_domain);
> +	return 0;
> +}
> +
> +static const struct of_device_id aspeed_i2c_controller_of_table[] = {
> +	{ .compatible = "aspeed,ast2400-i2c-controller", },
> +	{ .compatible = "aspeed,ast2500-i2c-controller", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, aspeed_i2c_controller_of_table);
> +
> +static struct platform_driver aspeed_i2c_controller_driver = {
> +	.probe		= aspeed_i2c_probe_controller,
> +	.remove		= aspeed_i2c_remove_controller,
> +	.driver		= {
> +		.name		= "ast-i2c-controller",
> +		.of_match_table	= aspeed_i2c_controller_of_table,
> +	},
> +};
> +
> +static int __init aspeed_i2c_driver_init(void)
> +{
> +	int ret;
> +
> +	ret = platform_driver_register(&aspeed_i2c_controller_driver);
> +	if (ret < 0)
> +		return ret;
> +	return platform_driver_register(&aspeed_i2c_bus_driver);
> +}
> +module_init(aspeed_i2c_driver_init);
> +
> +static void __exit aspeed_i2c_driver_exit(void)
> +{
> +	platform_driver_unregister(&aspeed_i2c_bus_driver);
> +	platform_driver_unregister(&aspeed_i2c_controller_driver);
> +}
> +module_exit(aspeed_i2c_driver_exit);
> +
> +MODULE_AUTHOR("Brendan Higgins <brendanhiggins-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>");
> +MODULE_DESCRIPTION("Aspeed I2C Bus Driver");
> +MODULE_LICENSE("GPL");
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v4 1/2] i2c: aspeed: added driver for Aspeed I2C

[Cédric Le Goater]

Hello Brendan,

A few comments below,

On 11/05/2016 02:58 AM, Brendan Higgins wrote:
> Added initial master and slave support for Aspeed I2C controller.
> Supports fourteen busses present in ast24xx and ast25xx BMC SoCs by
> Aspeed.
> 
> Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
> ---
> Changes for v2:
>   - Added single module_init (multiple was breaking some builds).
> Changes for v3:
>   - Removed "bus" device tree param; now extracted from bus address offset
> Changes for v4:
>   - I2C adapter number is now generated dynamically unless specified in alias.
> ---
>  drivers/i2c/busses/Kconfig      |  10 +
>  drivers/i2c/busses/Makefile     |   1 +
>  drivers/i2c/busses/i2c-aspeed.c | 807 ++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 818 insertions(+)
>  create mode 100644 drivers/i2c/busses/i2c-aspeed.c
> 
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index d252276..b6caa5d 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -1009,6 +1009,16 @@ config I2C_RCAR
>  	  This driver can also be built as a module.  If so, the module
>  	  will be called i2c-rcar.
>  
> +config I2C_ASPEED
> +	tristate "Aspeed AST2xxx SoC I2C Controller"
> +	depends on ARCH_ASPEED
> +	help
> +	  If you say yes to this option, support will be included for the
> +	  Aspeed AST2xxx SoC I2C controller.
> +
> +	  This driver can also be built as a module.  If so, the module
> +	  will be called i2c-aspeed.
> +
>  comment "External I2C/SMBus adapter drivers"
>  
>  config I2C_DIOLAN_U2C
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index 29764cc..826e780 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -99,6 +99,7 @@ obj-$(CONFIG_I2C_XILINX)	+= i2c-xiic.o
>  obj-$(CONFIG_I2C_XLR)		+= i2c-xlr.o
>  obj-$(CONFIG_I2C_XLP9XX)	+= i2c-xlp9xx.o
>  obj-$(CONFIG_I2C_RCAR)		+= i2c-rcar.o
> +obj-$(CONFIG_I2C_ASPEED)	+= i2c-aspeed.o
>  
>  # External I2C/SMBus adapter drivers
>  obj-$(CONFIG_I2C_DIOLAN_U2C)	+= i2c-diolan-u2c.o
> diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
> new file mode 100644
> index 0000000..88e078a
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-aspeed.c
> @@ -0,0 +1,807 @@
> +/*
> + *  I2C adapter for the ASPEED I2C bus.
> + *
> + *  Copyright (C) 2012-2020  ASPEED Technology Inc.
> + *  Copyright 2016 IBM Corporation
> + *  Copyright 2016 Google, Inc.
> + *
> + *  This program is free software; you can redistribute it and/or modify
> + *  it under the terms of the GNU General Public License version 2 as
> + *  published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/errno.h>
> +#include <linux/interrupt.h>
> +#include <linux/completion.h>
> +#include <linux/slab.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/err.h>
> +#include <linux/clk.h>
> +
> +/* I2C Register */
> +#define ASPEED_I2C_FUN_CTRL_REG				0x00
> +#define ASPEED_I2C_AC_TIMING_REG1			0x04
> +#define ASPEED_I2C_AC_TIMING_REG2			0x08
> +#define ASPEED_I2C_INTR_CTRL_REG			0x0c
> +#define ASPEED_I2C_INTR_STS_REG				0x10
> +#define ASPEED_I2C_CMD_REG				0x14
> +#define ASPEED_I2C_DEV_ADDR_REG				0x18
> +#define ASPEED_I2C_BYTE_BUF_REG				0x20
> +#define ASPEED_I2C_OFFSET_START				0x40
> +#define ASPEED_I2C_OFFSET_INCREMENT			0x40
> +
> +#define ASPEED_I2C_NUM_BUS 14
> +
> +/* Global Register Definition */
> +/* 0x00 : I2C Interrupt Status Register  */
> +/* 0x08 : I2C Interrupt Target Assignment  */
> +
> +/* Device Register Definition */
> +/* 0x00 : I2CD Function Control Register  */
> +#define ASPEED_I2CD_MULTI_MASTER_DIS			BIT(15)
> +#define ASPEED_I2CD_SDA_DRIVE_1T_EN			BIT(8)
> +#define ASPEED_I2CD_M_SDA_DRIVE_1T_EN			BIT(7)
> +#define ASPEED_I2CD_M_HIGH_SPEED_EN			BIT(6)
> +#define ASPEED_I2CD_SLAVE_EN				BIT(1)
> +#define ASPEED_I2CD_MASTER_EN				BIT(0)
> +
> +/* 0x08 : I2CD Clock and AC Timing Control Register #2 */
> +#define ASPEED_NO_TIMEOUT_CTRL				0
> +
> +
> +/* 0x0c : I2CD Interrupt Control Register &
> + * 0x10 : I2CD Interrupt Status Register
> + *
> + * These share bit definitions, so use the same values for the enable &
> + * status bits.
> + */
> +#define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT			BIT(14)
> +#define ASPEED_I2CD_INTR_BUS_RECOVER_DONE		BIT(13)
> +#define ASPEED_I2CD_INTR_SLAVE_MATCH			BIT(7)
> +#define ASPEED_I2CD_INTR_SCL_TIMEOUT			BIT(6)
> +#define ASPEED_I2CD_INTR_ABNORMAL			BIT(5)
> +#define ASPEED_I2CD_INTR_NORMAL_STOP			BIT(4)
> +#define ASPEED_I2CD_INTR_ARBIT_LOSS			BIT(3)
> +#define ASPEED_I2CD_INTR_RX_DONE			BIT(2)
> +#define ASPEED_I2CD_INTR_TX_NAK				BIT(1)
> +#define ASPEED_I2CD_INTR_TX_ACK				BIT(0)
> +
> +/* 0x14 : I2CD Command/Status Register   */
> +#define ASPEED_I2CD_SCL_LINE_STS			BIT(18)
> +#define ASPEED_I2CD_SDA_LINE_STS			BIT(17)
> +#define ASPEED_I2CD_BUS_BUSY_STS			BIT(16)
> +#define ASPEED_I2CD_BUS_RECOVER_CMD			BIT(11)
> +
> +/* Command Bit */
> +#define ASPEED_I2CD_M_STOP_CMD				BIT(5)
> +#define ASPEED_I2CD_M_S_RX_CMD_LAST			BIT(4)
> +#define ASPEED_I2CD_M_RX_CMD				BIT(3)
> +#define ASPEED_I2CD_S_TX_CMD				BIT(2)
> +#define ASPEED_I2CD_M_TX_CMD				BIT(1)
> +#define ASPEED_I2CD_M_START_CMD				BIT(0)
> +
> +/* 0x18 : I2CD Slave Device Address Register   */
> +#define ASPEED_I2CD_DEV_ADDR_MASK			GENMASK(6, 0)
> +
> +enum aspeed_i2c_slave_state {
> +	ASPEED_I2C_SLAVE_START,
> +	ASPEED_I2C_SLAVE_READ_REQUESTED,
> +	ASPEED_I2C_SLAVE_READ_PROCESSED,
> +	ASPEED_I2C_SLAVE_WRITE_REQUESTED,
> +	ASPEED_I2C_SLAVE_WRITE_RECEIVED,
> +	ASPEED_I2C_SLAVE_STOP,
> +};
> +
> +struct aspeed_i2c_bus {
> +	struct i2c_adapter		adap;
> +	struct device			*dev;
> +	void __iomem			*base;
> +	spinlock_t			lock;
> +	struct completion		cmd_complete;
> +	int				irq;
> +	/* Transaction state. */
> +	struct i2c_msg			*msg;
> +	int				msg_pos;
> +	u32				cmd_err;
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +	struct i2c_client		*slave;
> +	enum aspeed_i2c_slave_state	slave_state;
> +#endif
> +};
> +
> +struct aspeed_i2c_controller {
> +	struct device		*dev;
> +	void __iomem		*base;
> +	int			irq;
> +	struct irq_domain	*irq_domain;
> +};
> +
> +static inline void aspeed_i2c_write(struct aspeed_i2c_bus *bus, u32 val,
> +				    u32 reg)
> +{
> +	writel(val, bus->base + reg);
> +}
> +
> +static inline u32 aspeed_i2c_read(struct aspeed_i2c_bus *bus, u32 reg)
> +{
> +	return readl(bus->base + reg);
> +}
> +
> +static u8 aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus)
> +{
> +	u32 command;
> +	unsigned long time_left;
> +	unsigned long flags;
> +	int ret = 0;
> +
> +	spin_lock_irqsave(&bus->lock, flags);
> +	command = aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG);
> +	/* Bus is idle: no recovery needed. */
> +	if ((command & ASPEED_I2CD_SDA_LINE_STS) &&
> +	    (command & ASPEED_I2CD_SCL_LINE_STS))
> +		goto out;
> +
> +	dev_dbg(bus->dev, "bus hung (state %x), attempting recovery\n",
> +		command);
> +
> +	/* Bus held: put bus in stop state. */
> +	if ((command & ASPEED_I2CD_SDA_LINE_STS) &&
> +	    !(command & ASPEED_I2CD_SCL_LINE_STS)) {
> +		aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD,
> +				 ASPEED_I2C_CMD_REG);
> +		reinit_completion(&bus->cmd_complete);
> +		spin_unlock_irqrestore(&bus->lock, flags);
> +
> +		time_left = wait_for_completion_interruptible_timeout(
> +				&bus->cmd_complete, bus->adap.timeout * HZ);
> +
> +		spin_lock_irqsave(&bus->lock, flags);
> +		if (time_left == 0)
> +			ret = -ETIMEDOUT;
> +		else if (bus->cmd_err)
> +			ret = -EIO;
> +	/* Bus error. */
> +	} else if (!(command & ASPEED_I2CD_SDA_LINE_STS)) {
> +		aspeed_i2c_write(bus, ASPEED_I2CD_BUS_RECOVER_CMD,
> +				 ASPEED_I2C_CMD_REG);
> +		reinit_completion(&bus->cmd_complete);
> +		spin_unlock_irqrestore(&bus->lock, flags);
> +
> +		time_left = wait_for_completion_interruptible_timeout(
> +				&bus->cmd_complete, bus->adap.timeout * HZ);
> +
> +		spin_lock_irqsave(&bus->lock, flags);
> +		if (time_left == 0)
> +			ret = -ETIMEDOUT;
> +		else if (bus->cmd_err)
> +			ret = -EIO;
> +		/* Recovery failed. */
> +		else if (!(aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG) &
> +			   ASPEED_I2CD_SDA_LINE_STS))
> +			ret = -EIO;
> +	}
> +
> +out:
> +	spin_unlock_irqrestore(&bus->lock, flags);
> +	return ret;
> +}
> +
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
> +{
> +	bool irq_handled = true;
> +	u32 command;
> +	u32 irq_status;
> +	u32 status_ack = 0;
> +	u8 value;
> +	struct i2c_client *slave = bus->slave;
> +
> +	spin_lock(&bus->lock);
> +	if (!slave) {
> +		irq_handled = false;
> +		goto out;
> +	}
> +	command = aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG);
> +	irq_status = aspeed_i2c_read(bus, ASPEED_I2C_INTR_STS_REG);
> +
> +	/* Slave was requested, restart state machine. */
> +	if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) {
> +		status_ack |= ASPEED_I2CD_INTR_SLAVE_MATCH;
> +		bus->slave_state = ASPEED_I2C_SLAVE_START;
> +	}
> +	/* Slave is not currently active, irq was for someone else. */
> +	if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
> +		irq_handled = false;
> +		goto out;
> +	}
> +
> +	dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n",
> +		irq_status, command);
> +
> +	/* Slave was sent something. */
> +	if (irq_status & ASPEED_I2CD_INTR_RX_DONE) {
> +		value = aspeed_i2c_read(bus, ASPEED_I2C_BYTE_BUF_REG) >> 8;
> +		/* Handle address frame. */
> +		if (bus->slave_state == ASPEED_I2C_SLAVE_START) {
> +			if (value & 0x1)
> +				bus->slave_state =
> +						ASPEED_I2C_SLAVE_READ_REQUESTED;
> +			else
> +				bus->slave_state =
> +						ASPEED_I2C_SLAVE_WRITE_REQUESTED;
> +		}
> +		status_ack |= ASPEED_I2CD_INTR_RX_DONE;
> +	}
> +
> +	/* Slave was asked to stop. */
> +	if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
> +		status_ack |= ASPEED_I2CD_INTR_NORMAL_STOP;
> +		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
> +	}
> +	if (irq_status & ASPEED_I2CD_INTR_TX_NAK) {
> +		status_ack |= ASPEED_I2CD_INTR_TX_NAK;
> +		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
> +	}
> +
> +	if (bus->slave_state == ASPEED_I2C_SLAVE_READ_REQUESTED) {
> +		if (irq_status & ASPEED_I2CD_INTR_TX_ACK)
> +			dev_err(bus->dev, "Unexpected ACK on read request.\n");
> +		bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED;
> +
> +		i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
> +		aspeed_i2c_write(bus, value, ASPEED_I2C_BYTE_BUF_REG);
> +		aspeed_i2c_write(bus, ASPEED_I2CD_S_TX_CMD, ASPEED_I2C_CMD_REG);
> +	} else if (bus->slave_state == ASPEED_I2C_SLAVE_READ_PROCESSED) {
> +		status_ack |= ASPEED_I2CD_INTR_TX_ACK;
> +		if (!(irq_status & ASPEED_I2CD_INTR_TX_ACK))
> +			dev_err(bus->dev,
> +				"Expected ACK after processed read.\n");
> +		i2c_slave_event(slave, I2C_SLAVE_READ_PROCESSED, &value);
> +		aspeed_i2c_write(bus, value, ASPEED_I2C_BYTE_BUF_REG);
> +		aspeed_i2c_write(bus, ASPEED_I2CD_S_TX_CMD, ASPEED_I2C_CMD_REG);
> +	} else if (bus->slave_state == ASPEED_I2C_SLAVE_WRITE_REQUESTED) {
> +		bus->slave_state = ASPEED_I2C_SLAVE_WRITE_RECEIVED;
> +		i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
> +	} else if (bus->slave_state == ASPEED_I2C_SLAVE_WRITE_RECEIVED) {
> +		i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value);
> +	} else if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
> +		i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
> +	}
> +
> +	if (status_ack != irq_status)
> +		dev_err(bus->dev,
> +			"irq handled != irq. expected %x, but was %x\n",
> +			irq_status, status_ack);
> +	aspeed_i2c_write(bus, status_ack, ASPEED_I2C_INTR_STS_REG);
> +
> +out:
> +	spin_unlock(&bus->lock);
> +	return irq_handled;
> +}
> +#endif
> +
> +static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
> +{
> +	const u32 errs = ASPEED_I2CD_INTR_ARBIT_LOSS |
> +		ASPEED_I2CD_INTR_ABNORMAL |
> +		ASPEED_I2CD_INTR_SCL_TIMEOUT |
> +		ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |
> +		ASPEED_I2CD_INTR_TX_NAK;
> +	u32 irq_status;
> +
> +	spin_lock(&bus->lock);
> +	irq_status = aspeed_i2c_read(bus, ASPEED_I2C_INTR_STS_REG);
> +	bus->cmd_err = irq_status & errs;
> +
> +	dev_dbg(bus->dev, "master irq status 0x%08x\n", irq_status);
> +
> +	/* No message to transfer. */
> +	if (bus->cmd_err ||
> +	    (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) ||
> +	    (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE)) {
> +		complete(&bus->cmd_complete);
> +		goto out;
> +	} else if (!bus->msg || bus->msg_pos >= bus->msg->len)
> +		goto out;
> +
> +	if ((bus->msg->flags & I2C_M_RD) &&
> +	    (irq_status & ASPEED_I2CD_INTR_RX_DONE)) {
> +		bus->msg->buf[bus->msg_pos++] = aspeed_i2c_read(
> +				bus, ASPEED_I2C_BYTE_BUF_REG) >> 8;
> +		if (bus->msg_pos + 1 < bus->msg->len)
> +			aspeed_i2c_write(bus, ASPEED_I2CD_M_RX_CMD,
> +					 ASPEED_I2C_CMD_REG);
> +		else if (bus->msg_pos < bus->msg->len)
> +			aspeed_i2c_write(bus, ASPEED_I2CD_M_RX_CMD |
> +				      ASPEED_I2CD_M_S_RX_CMD_LAST,
> +				      ASPEED_I2C_CMD_REG);
> +	} else if (!(bus->msg->flags & I2C_M_RD) &&
> +		   (irq_status & ASPEED_I2CD_INTR_TX_ACK)) {
> +		aspeed_i2c_write(bus, bus->msg->buf[bus->msg_pos++],
> +			      ASPEED_I2C_BYTE_BUF_REG);
> +		aspeed_i2c_write(bus, ASPEED_I2CD_M_TX_CMD, ASPEED_I2C_CMD_REG);
> +	}

is it safe to start a new transaction when in a interrupt handler ? 

> +	/* Transmission complete: notify caller. */
> +	if (bus->msg_pos >= bus->msg->len)
> +		complete(&bus->cmd_complete);
> +out:
> +	aspeed_i2c_write(bus, irq_status, ASPEED_I2C_INTR_STS_REG);

so this is clearing the interrupt status just after having started
a new transaction on the bus. It looks unsafe to me as it could 
clear the status of the just started transaction.

> +	spin_unlock(&bus->lock);
> +	return true;
> +}
> +
> +static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
> +{
> +	struct aspeed_i2c_bus *bus = dev_id;
> +
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +	if (aspeed_i2c_slave_irq(bus)) {
> +		dev_dbg(bus->dev, "irq handled by slave.\n");
> +		return IRQ_HANDLED;
> +	}
> +#endif
> +	if (aspeed_i2c_master_irq(bus)) {
> +		dev_dbg(bus->dev, "irq handled by master.\n");
> +		return IRQ_HANDLED;
> +	}
> +	dev_err(bus->dev, "irq not handled properly!\n");
> +	return IRQ_HANDLED;
> +}
> +
> +static int aspeed_i2c_master_single_xfer(struct i2c_adapter *adap,
> +				      struct i2c_msg *msg)
> +{
> +	struct aspeed_i2c_bus *bus = adap->algo_data;
> +	unsigned long flags;
> +	u8 slave_addr;
> +	u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD;
> +	int ret = msg->len;
> +	unsigned long time_left;
> +
> +	spin_lock_irqsave(&bus->lock, flags);
> +	bus->msg = msg;
> +	bus->msg_pos = 0;
> +	slave_addr = msg->addr << 1;
> +	if (msg->flags & I2C_M_RD) {
> +		slave_addr |= 1;
> +		command |= ASPEED_I2CD_M_RX_CMD;
> +		if (msg->len == 1)
> +			command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
> +	}
> +	aspeed_i2c_write(bus, slave_addr, ASPEED_I2C_BYTE_BUF_REG);
> +	aspeed_i2c_write(bus, command, ASPEED_I2C_CMD_REG);
> +	reinit_completion(&bus->cmd_complete);
> +	spin_unlock_irqrestore(&bus->lock, flags);
> +
> +	time_left = wait_for_completion_interruptible_timeout(
> +			&bus->cmd_complete, bus->adap.timeout * HZ * msg->len);

Why do you multiply by * msg->len ? 

> +	if (time_left == 0)
> +		return -ETIMEDOUT;
> +
> +	spin_lock_irqsave(&bus->lock, flags);
> +	if (bus->cmd_err)
> +		ret = -EIO;
> +	bus->msg = NULL;
> +	spin_unlock_irqrestore(&bus->lock, flags);
> +
> +	return ret;
> +}
> +
> +static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
> +				  struct i2c_msg *msgs, int num)
> +{
> +	struct aspeed_i2c_bus *bus = adap->algo_data;
> +	int ret;
> +	int i;
> +	unsigned long flags;
> +	unsigned long time_left;
> +
> +	/* If bus is busy, attempt recovery. We assume a single master
> +	 * environment.
> +	 */
> +	if (aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG) &
> +	    ASPEED_I2CD_BUS_BUSY_STS) {
> +		ret = aspeed_i2c_recover_bus(bus);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	for (i = 0; i < num; i++) {
> +		ret = aspeed_i2c_master_single_xfer(adap, &msgs[i]);
> +		if (ret < 0)
> +			break;
> +		/* TODO: Support other forms of I2C protocol mangling. */
> +		if (msgs[i].flags & I2C_M_STOP) {
> +			spin_lock_irqsave(&bus->lock, flags);
> +			aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD,
> +				      ASPEED_I2C_CMD_REG);
> +			reinit_completion(&bus->cmd_complete);
> +			spin_unlock_irqrestore(&bus->lock, flags);
> +
> +			time_left = wait_for_completion_interruptible_timeout(
> +					&bus->cmd_complete,
> +					bus->adap.timeout * HZ);
> +			if (time_left == 0)
> +				return -ETIMEDOUT;
> +		}
> +	}
> +
> +	spin_lock_irqsave(&bus->lock, flags);
> +	aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD, ASPEED_I2C_CMD_REG);
> +	reinit_completion(&bus->cmd_complete);
> +	spin_unlock_irqrestore(&bus->lock, flags);
> +
> +	time_left = wait_for_completion_interruptible_timeout(
> +			&bus->cmd_complete, bus->adap.timeout * HZ);
> +	if (time_left == 0)
> +		return -ETIMEDOUT;
> +
> +	/* If nothing went wrong, return number of messages transferred. */
> +	if (ret < 0)
> +		return ret;
> +	else
> +		return i;
> +}
> +
> +static u32 aspeed_i2c_functionality(struct i2c_adapter *adap)
> +{
> +	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
> +}
> +
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +static int aspeed_i2c_reg_slave(struct i2c_client *client)
> +{
> +	struct aspeed_i2c_bus *bus;
> +	unsigned long flags;
> +	u32 addr_reg_val;
> +	u32 func_ctrl_reg_val;
> +
> +	bus = client->adapter->algo_data;
> +	spin_lock_irqsave(&bus->lock, flags);
> +	if (bus->slave) {
> +		spin_unlock_irqrestore(&bus->lock, flags);
> +		return -EINVAL;
> +	}
> +
> +	/* Set slave addr. */
> +	addr_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_DEV_ADDR_REG);
> +	addr_reg_val &= ~ASPEED_I2CD_DEV_ADDR_MASK;
> +	addr_reg_val |= client->addr & ASPEED_I2CD_DEV_ADDR_MASK;
> +	aspeed_i2c_write(bus, addr_reg_val, ASPEED_I2C_DEV_ADDR_REG);
> +
> +	/* Switch from master mode to slave mode. */
> +	func_ctrl_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG);
> +	func_ctrl_reg_val &= ~ASPEED_I2CD_MASTER_EN;
> +	func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN;
> +	aspeed_i2c_write(bus, func_ctrl_reg_val, ASPEED_I2C_FUN_CTRL_REG);
> +
> +	bus->slave = client;
> +	bus->slave_state = ASPEED_I2C_SLAVE_STOP;
> +	spin_unlock_irqrestore(&bus->lock, flags);
> +	return 0;
> +}
> +
> +static int aspeed_i2c_unreg_slave(struct i2c_client *client)
> +{
> +	struct aspeed_i2c_bus *bus = client->adapter->algo_data;
> +	unsigned long flags;
> +	u32 func_ctrl_reg_val;
> +
> +	spin_lock_irqsave(&bus->lock, flags);
> +	if (!bus->slave) {
> +		spin_unlock_irqrestore(&bus->lock, flags);
> +		return -EINVAL;
> +	}
> +
> +	/* Switch from slave mode to master mode. */
> +	func_ctrl_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG);
> +	func_ctrl_reg_val &= ~ASPEED_I2CD_SLAVE_EN;
> +	func_ctrl_reg_val |= ASPEED_I2CD_MASTER_EN;
> +	aspeed_i2c_write(bus, func_ctrl_reg_val, ASPEED_I2C_FUN_CTRL_REG);
> +
> +	bus->slave = NULL;
> +	spin_unlock_irqrestore(&bus->lock, flags);
> +	return 0;
> +}
> +#endif
> +
> +static const struct i2c_algorithm aspeed_i2c_algo = {
> +	.master_xfer	= aspeed_i2c_master_xfer,
> +	.functionality	= aspeed_i2c_functionality,
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +	.reg_slave	= aspeed_i2c_reg_slave,
> +	.unreg_slave	= aspeed_i2c_unreg_slave,
> +#endif
> +};
> +
> +static u32 aspeed_i2c_get_clk_reg_val(u32 divider_ratio)
> +{
> +	unsigned int inc = 0, div;
> +	u32 scl_low, scl_high, data;
> +
> +	for (div = 0; divider_ratio >= 16; div++) {
> +		inc |= (divider_ratio & 1);
> +		divider_ratio >>= 1;
> +	}
> +	divider_ratio += inc;
> +	scl_low = (divider_ratio >> 1) - 1;
> +	scl_high = divider_ratio - scl_low - 2;
> +	data = 0x77700300 | (scl_high << 16) | (scl_low << 12) | div;
> +	return data;
> +}
> +
> +static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus,
> +			    struct platform_device *pdev)
> +{
> +	struct clk *pclk;
> +	u32 clk_freq;
> +	u32 divider_ratio;
> +	int ret;
> +
> +	pclk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(pclk)) {
> +		dev_err(&pdev->dev, "clk_get failed\n");
> +		return PTR_ERR(pclk);
> +	}
> +	ret = of_property_read_u32(pdev->dev.of_node,
> +			"clock-frequency", &clk_freq);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev,
> +				"Could not read clock-frequency property\n");
> +		clk_freq = 100000;
> +	}
> +	divider_ratio = clk_get_rate(pclk) / clk_freq;
> +	/* We just need the clock rate, we don't actually use the clk object. */
> +	devm_clk_put(&pdev->dev, pclk);
> +
> +	/* Set AC Timing */
> +	if (clk_freq / 1000 > 400) {
> +		aspeed_i2c_write(bus, aspeed_i2c_read(bus,
> +						      ASPEED_I2C_FUN_CTRL_REG) |
> +				ASPEED_I2CD_M_HIGH_SPEED_EN |
> +				ASPEED_I2CD_M_SDA_DRIVE_1T_EN |
> +				ASPEED_I2CD_SDA_DRIVE_1T_EN,
> +				ASPEED_I2C_FUN_CTRL_REG);
> +
> +		aspeed_i2c_write(bus, 0x3, ASPEED_I2C_AC_TIMING_REG2);
> +		aspeed_i2c_write(bus, aspeed_i2c_get_clk_reg_val(divider_ratio),
> +			      ASPEED_I2C_AC_TIMING_REG1);
> +	} else {
> +		aspeed_i2c_write(bus, aspeed_i2c_get_clk_reg_val(divider_ratio),
> +			      ASPEED_I2C_AC_TIMING_REG1);
> +		aspeed_i2c_write(bus, ASPEED_NO_TIMEOUT_CTRL,
> +				 ASPEED_I2C_AC_TIMING_REG2);
> +	}
> +
> +	return 0;
> +}
> +
> +static void noop(struct irq_data *data) { }
> +
> +static struct irq_chip aspeed_i2c_irqchip = {
> +	.name		= "ast-i2c",
> +	.irq_unmask	= noop,
> +	.irq_mask	= noop,
> +};
> +
> +static int aspeed_i2c_probe_bus(struct platform_device *pdev)
> +{
> +	struct aspeed_i2c_bus *bus;
> +	struct aspeed_i2c_controller *controller =
> +			dev_get_drvdata(pdev->dev.parent);
> +	struct resource *res;
> +	int ret, irq;
> +	u32 hwirq;
> +
> +	bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
> +	if (!bus)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	bus->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(bus->base))
> +		return PTR_ERR(bus->base);
> +
> +	bus->irq = platform_get_irq(pdev, 0);
> +	if (bus->irq < 0)
> +		return -ENXIO;
> +	ret = of_property_read_u32(pdev->dev.of_node, "interrupts", &hwirq);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "no I2C 'interrupts' property\n");
> +		return -ENXIO;
> +	}
> +	irq = irq_create_mapping(controller->irq_domain, hwirq);
> +	irq_set_chip_data(irq, controller);
> +	irq_set_chip_and_handler(irq, &aspeed_i2c_irqchip, handle_simple_irq);
> +	ret = devm_request_irq(&pdev->dev, bus->irq, aspeed_i2c_bus_irq,
> +			0, dev_name(&pdev->dev), bus);
> +	if (ret) {
> +		dev_err(&pdev->dev, "failed to request interrupt\n");
> +		return -ENXIO;
> +	}
> +
> +	/* Initialize the I2C adapter */
> +	spin_lock_init(&bus->lock);
> +	init_completion(&bus->cmd_complete);
> +	bus->adap.owner = THIS_MODULE;
> +	bus->adap.retries = 0;
> +	bus->adap.timeout = 5;
> +	bus->adap.algo = &aspeed_i2c_algo;
> +	bus->adap.algo_data = bus;
> +	bus->adap.dev.parent = &pdev->dev;
> +	bus->adap.dev.of_node = pdev->dev.of_node;
> +	snprintf(bus->adap.name, sizeof(bus->adap.name), "Aspeed i2c");
> +
> +	bus->dev = &pdev->dev;
> +
> +	/* reset device: disable master & slave functions */
> +	aspeed_i2c_write(bus, 0, ASPEED_I2C_FUN_CTRL_REG);
> +
> +	ret = aspeed_i2c_init_clk(bus, pdev);
> +	if (ret < 0)
> +		return ret;
> +
> +	/* Enable Master Mode */
> +	aspeed_i2c_write(bus, aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG) |
> +		      ASPEED_I2CD_MASTER_EN |
> +		      ASPEED_I2CD_MULTI_MASTER_DIS, ASPEED_I2C_FUN_CTRL_REG);
> +
> +	/* Set interrupt generation of I2C controller */
> +	aspeed_i2c_write(bus, ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |
> +			ASPEED_I2CD_INTR_BUS_RECOVER_DONE |
> +			ASPEED_I2CD_INTR_SCL_TIMEOUT |
> +			ASPEED_I2CD_INTR_ABNORMAL |
> +			ASPEED_I2CD_INTR_NORMAL_STOP |
> +			ASPEED_I2CD_INTR_ARBIT_LOSS |
> +			ASPEED_I2CD_INTR_RX_DONE |
> +			ASPEED_I2CD_INTR_TX_NAK |
> +			ASPEED_I2CD_INTR_TX_ACK,
> +			ASPEED_I2C_INTR_CTRL_REG);
> +
> +	ret = i2c_add_adapter(&bus->adap);
> +	if (ret < 0)
> +		return -ENXIO;
> +
> +	platform_set_drvdata(pdev, bus);
> +
> +	dev_info(bus->dev, "i2c bus %d registered, irq %d\n",
> +			bus->adap.nr, bus->irq);
> +
> +	return 0;
> +}
> +
> +static int aspeed_i2c_remove_bus(struct platform_device *pdev)
> +{
> +	struct aspeed_i2c_bus *bus = platform_get_drvdata(pdev);
> +
> +	i2c_del_adapter(&bus->adap);
> +	return 0;
> +}
> +
> +static const struct of_device_id aspeed_i2c_bus_of_table[] = {
> +	{ .compatible = "aspeed,ast2400-i2c-bus", },
> +	{ .compatible = "aspeed,ast2500-i2c-bus", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table);
> +
> +static struct platform_driver aspeed_i2c_bus_driver = {
> +	.probe		= aspeed_i2c_probe_bus,
> +	.remove		= aspeed_i2c_remove_bus,
> +	.driver		= {
> +		.name		= "ast-i2c-bus",
> +		.of_match_table	= aspeed_i2c_bus_of_table,
> +	},
> +};
> +
> +static void aspeed_i2c_controller_irq(struct irq_desc *desc)
> +{
> +	struct aspeed_i2c_controller *c = irq_desc_get_handler_data(desc);
> +	unsigned long p, status;
> +	unsigned int bus_irq;
> +
> +	status = readl(c->base);
> +	for_each_set_bit(p, &status, ASPEED_I2C_NUM_BUS) {
> +		bus_irq = irq_find_mapping(c->irq_domain, p);
> +		generic_handle_irq(bus_irq);
> +	}
> +}
> +
> +static int aspeed_i2c_probe_controller(struct platform_device *pdev)
> +{
> +	struct aspeed_i2c_controller *controller;
> +	struct device_node *np;
> +	struct resource *res;
> +
> +	controller = kzalloc(sizeof(*controller), GFP_KERNEL);

use devm_kzalloc() may be ? 

C.

> +	if (!controller)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	controller->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(controller->base))
> +		return PTR_ERR(controller->base);
> +
> +	controller->irq = platform_get_irq(pdev, 0);
> +	if (controller->irq < 0)
> +		return -ENXIO;
> +
> +	controller->irq_domain = irq_domain_add_linear(pdev->dev.of_node,
> +			ASPEED_I2C_NUM_BUS, &irq_domain_simple_ops, NULL);
> +	if (!controller->irq_domain)
> +		return -ENXIO;
> +	controller->irq_domain->name = "ast-i2c-domain";
> +
> +	irq_set_chained_handler_and_data(controller->irq,
> +			aspeed_i2c_controller_irq, controller);
> +
> +	controller->dev = &pdev->dev;
> +
> +	platform_set_drvdata(pdev, controller);
> +
> +	dev_info(controller->dev, "i2c controller registered, irq %d\n",
> +			controller->irq);
> +
> +	for_each_child_of_node(pdev->dev.of_node, np) {
> +		of_platform_device_create(np, NULL, &pdev->dev);
> +		of_node_put(np);
> +	}
> +
> +	return 0;
> +}
> +
> +static int aspeed_i2c_remove_controller(struct platform_device *pdev)
> +{
> +	struct aspeed_i2c_controller *controller = platform_get_drvdata(pdev);
> +
> +	irq_domain_remove(controller->irq_domain);
> +	return 0;
> +}
> +
> +static const struct of_device_id aspeed_i2c_controller_of_table[] = {
> +	{ .compatible = "aspeed,ast2400-i2c-controller", },
> +	{ .compatible = "aspeed,ast2500-i2c-controller", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, aspeed_i2c_controller_of_table);
> +
> +static struct platform_driver aspeed_i2c_controller_driver = {
> +	.probe		= aspeed_i2c_probe_controller,
> +	.remove		= aspeed_i2c_remove_controller,
> +	.driver		= {
> +		.name		= "ast-i2c-controller",
> +		.of_match_table	= aspeed_i2c_controller_of_table,
> +	},
> +};
> +
> +static int __init aspeed_i2c_driver_init(void)
> +{
> +	int ret;
> +
> +	ret = platform_driver_register(&aspeed_i2c_controller_driver);
> +	if (ret < 0)
> +		return ret;
> +	return platform_driver_register(&aspeed_i2c_bus_driver);
> +}
> +module_init(aspeed_i2c_driver_init);
> +
> +static void __exit aspeed_i2c_driver_exit(void)
> +{
> +	platform_driver_unregister(&aspeed_i2c_bus_driver);
> +	platform_driver_unregister(&aspeed_i2c_controller_driver);
> +}
> +module_exit(aspeed_i2c_driver_exit);
> +
> +MODULE_AUTHOR("Brendan Higgins <brendanhiggins@google.com>");
> +MODULE_DESCRIPTION("Aspeed I2C Bus Driver");
> +MODULE_LICENSE("GPL");
> 

Re: [PATCH v4 1/2] i2c: aspeed: added driver for Aspeed I2C

[Kachalov Anton]

Hello.

I would like to add my five cents here. Do not limit the bus_clk with 400kHz (FM) while HighSpeed is above 1MHz (above FM+ devices). I've successfully tested FM+ (1Mhz) in a quite big i2c network (a number of pca9600, pca9675, pca9848) with at least eight AST2150 SoCs on the common bus.

BTW. Just a lame question. If the device isn't designed to work on the higher speed (like standard of FM) while the bus selected as FM+, would those kind of devices just unoperate or may have undefined behavior and disturb the SDA/SCL? Just wondering to dynamically slowdown down to 100Khz (if needed) for the specific slave, but keep high rate (FM+) at the normal operation.

--- source/drivers/i2c/busses/i2c-aspeed.c.orig	2016-11-18 19:17:41.000000000 +0300
+++ source/drivers/i2c/busses/i2c-aspeed.c	2016-11-18 19:17:49.682092658 +0300
@@ -310,7 +310,7 @@ static void ast_i2c_dev_init(struct ast_
 			bus->bus_clk, clk_get_rate(bus->pclk));
 
 	/* Set AC Timing */
-	if(bus->bus_clk / 1000 > 400) {
+	if(bus->bus_clk / 1000 > 1000) {
 		ast_i2c_write(bus, ast_i2c_read(bus, I2C_FUN_CTRL_REG) |
 				AST_I2CD_M_HIGH_SPEED_EN |
 				AST_I2CD_M_SDA_DRIVE_1T_EN |

22.11.2016, 12:07, "Cédric Le Goater" <clg-Bxea+6Xhats@public.gmane.org>:
> Hello Brendan,
>
> A few comments below,
>
> On 11/05/2016 02:58 AM, Brendan Higgins wrote:
>>  Added initial master and slave support for Aspeed I2C controller.
>>  Supports fourteen busses present in ast24xx and ast25xx BMC SoCs by
>>  Aspeed.
>>
>>  Signed-off-by: Brendan Higgins <brendanhiggins-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
>>  ---
>>  Changes for v2:
>>    - Added single module_init (multiple was breaking some builds).
>>  Changes for v3:
>>    - Removed "bus" device tree param; now extracted from bus address offset
>>  Changes for v4:
>>    - I2C adapter number is now generated dynamically unless specified in alias.
>>  ---
>>   drivers/i2c/busses/Kconfig | 10 +
>>   drivers/i2c/busses/Makefile | 1 +
>>   drivers/i2c/busses/i2c-aspeed.c | 807 ++++++++++++++++++++++++++++++++++++++++
>>   3 files changed, 818 insertions(+)
>>   create mode 100644 drivers/i2c/busses/i2c-aspeed.c
>>
>>  diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
>>  index d252276..b6caa5d 100644
>>  --- a/drivers/i2c/busses/Kconfig
>>  +++ b/drivers/i2c/busses/Kconfig
>>  @@ -1009,6 +1009,16 @@ config I2C_RCAR
>>             This driver can also be built as a module. If so, the module
>>             will be called i2c-rcar.
>>
>>  +config I2C_ASPEED
>>  + tristate "Aspeed AST2xxx SoC I2C Controller"
>>  + depends on ARCH_ASPEED
>>  + help
>>  + If you say yes to this option, support will be included for the
>>  + Aspeed AST2xxx SoC I2C controller.
>>  +
>>  + This driver can also be built as a module. If so, the module
>>  + will be called i2c-aspeed.
>>  +
>>   comment "External I2C/SMBus adapter drivers"
>>
>>   config I2C_DIOLAN_U2C
>>  diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
>>  index 29764cc..826e780 100644
>>  --- a/drivers/i2c/busses/Makefile
>>  +++ b/drivers/i2c/busses/Makefile
>>  @@ -99,6 +99,7 @@ obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o
>>   obj-$(CONFIG_I2C_XLR) += i2c-xlr.o
>>   obj-$(CONFIG_I2C_XLP9XX) += i2c-xlp9xx.o
>>   obj-$(CONFIG_I2C_RCAR) += i2c-rcar.o
>>  +obj-$(CONFIG_I2C_ASPEED) += i2c-aspeed.o
>>
>>   # External I2C/SMBus adapter drivers
>>   obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o
>>  diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
>>  new file mode 100644
>>  index 0000000..88e078a
>>  --- /dev/null
>>  +++ b/drivers/i2c/busses/i2c-aspeed.c
>>  @@ -0,0 +1,807 @@
>>  +/*
>>  + * I2C adapter for the ASPEED I2C bus.
>>  + *
>>  + * Copyright (C) 2012-2020 ASPEED Technology Inc.
>>  + * Copyright 2016 IBM Corporation
>>  + * Copyright 2016 Google, Inc.
>>  + *
>>  + * This program is free software; you can redistribute it and/or modify
>>  + * it under the terms of the GNU General Public License version 2 as
>>  + * published by the Free Software Foundation.
>>  + */
>>  +
>>  +#include <linux/kernel.h>
>>  +#include <linux/module.h>
>>  +#include <linux/i2c.h>
>>  +#include <linux/irq.h>
>>  +#include <linux/irqdomain.h>
>>  +#include <linux/init.h>
>>  +#include <linux/io.h>
>>  +#include <linux/errno.h>
>>  +#include <linux/interrupt.h>
>>  +#include <linux/completion.h>
>>  +#include <linux/slab.h>
>>  +#include <linux/of_address.h>
>>  +#include <linux/of_platform.h>
>>  +#include <linux/platform_device.h>
>>  +#include <linux/err.h>
>>  +#include <linux/clk.h>
>>  +
>>  +/* I2C Register */
>>  +#define ASPEED_I2C_FUN_CTRL_REG 0x00
>>  +#define ASPEED_I2C_AC_TIMING_REG1 0x04
>>  +#define ASPEED_I2C_AC_TIMING_REG2 0x08
>>  +#define ASPEED_I2C_INTR_CTRL_REG 0x0c
>>  +#define ASPEED_I2C_INTR_STS_REG 0x10
>>  +#define ASPEED_I2C_CMD_REG 0x14
>>  +#define ASPEED_I2C_DEV_ADDR_REG 0x18
>>  +#define ASPEED_I2C_BYTE_BUF_REG 0x20
>>  +#define ASPEED_I2C_OFFSET_START 0x40
>>  +#define ASPEED_I2C_OFFSET_INCREMENT 0x40
>>  +
>>  +#define ASPEED_I2C_NUM_BUS 14
>>  +
>>  +/* Global Register Definition */
>>  +/* 0x00 : I2C Interrupt Status Register */
>>  +/* 0x08 : I2C Interrupt Target Assignment */
>>  +
>>  +/* Device Register Definition */
>>  +/* 0x00 : I2CD Function Control Register */
>>  +#define ASPEED_I2CD_MULTI_MASTER_DIS BIT(15)
>>  +#define ASPEED_I2CD_SDA_DRIVE_1T_EN BIT(8)
>>  +#define ASPEED_I2CD_M_SDA_DRIVE_1T_EN BIT(7)
>>  +#define ASPEED_I2CD_M_HIGH_SPEED_EN BIT(6)
>>  +#define ASPEED_I2CD_SLAVE_EN BIT(1)
>>  +#define ASPEED_I2CD_MASTER_EN BIT(0)
>>  +
>>  +/* 0x08 : I2CD Clock and AC Timing Control Register #2 */
>>  +#define ASPEED_NO_TIMEOUT_CTRL 0
>>  +
>>  +
>>  +/* 0x0c : I2CD Interrupt Control Register &
>>  + * 0x10 : I2CD Interrupt Status Register
>>  + *
>>  + * These share bit definitions, so use the same values for the enable &
>>  + * status bits.
>>  + */
>>  +#define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT BIT(14)
>>  +#define ASPEED_I2CD_INTR_BUS_RECOVER_DONE BIT(13)
>>  +#define ASPEED_I2CD_INTR_SLAVE_MATCH BIT(7)
>>  +#define ASPEED_I2CD_INTR_SCL_TIMEOUT BIT(6)
>>  +#define ASPEED_I2CD_INTR_ABNORMAL BIT(5)
>>  +#define ASPEED_I2CD_INTR_NORMAL_STOP BIT(4)
>>  +#define ASPEED_I2CD_INTR_ARBIT_LOSS BIT(3)
>>  +#define ASPEED_I2CD_INTR_RX_DONE BIT(2)
>>  +#define ASPEED_I2CD_INTR_TX_NAK BIT(1)
>>  +#define ASPEED_I2CD_INTR_TX_ACK BIT(0)
>>  +
>>  +/* 0x14 : I2CD Command/Status Register */
>>  +#define ASPEED_I2CD_SCL_LINE_STS BIT(18)
>>  +#define ASPEED_I2CD_SDA_LINE_STS BIT(17)
>>  +#define ASPEED_I2CD_BUS_BUSY_STS BIT(16)
>>  +#define ASPEED_I2CD_BUS_RECOVER_CMD BIT(11)
>>  +
>>  +/* Command Bit */
>>  +#define ASPEED_I2CD_M_STOP_CMD BIT(5)
>>  +#define ASPEED_I2CD_M_S_RX_CMD_LAST BIT(4)
>>  +#define ASPEED_I2CD_M_RX_CMD BIT(3)
>>  +#define ASPEED_I2CD_S_TX_CMD BIT(2)
>>  +#define ASPEED_I2CD_M_TX_CMD BIT(1)
>>  +#define ASPEED_I2CD_M_START_CMD BIT(0)
>>  +
>>  +/* 0x18 : I2CD Slave Device Address Register */
>>  +#define ASPEED_I2CD_DEV_ADDR_MASK GENMASK(6, 0)
>>  +
>>  +enum aspeed_i2c_slave_state {
>>  + ASPEED_I2C_SLAVE_START,
>>  + ASPEED_I2C_SLAVE_READ_REQUESTED,
>>  + ASPEED_I2C_SLAVE_READ_PROCESSED,
>>  + ASPEED_I2C_SLAVE_WRITE_REQUESTED,
>>  + ASPEED_I2C_SLAVE_WRITE_RECEIVED,
>>  + ASPEED_I2C_SLAVE_STOP,
>>  +};
>>  +
>>  +struct aspeed_i2c_bus {
>>  + struct i2c_adapter adap;
>>  + struct device *dev;
>>  + void __iomem *base;
>>  + spinlock_t lock;
>>  + struct completion cmd_complete;
>>  + int irq;
>>  + /* Transaction state. */
>>  + struct i2c_msg *msg;
>>  + int msg_pos;
>>  + u32 cmd_err;
>>  +#if IS_ENABLED(CONFIG_I2C_SLAVE)
>>  + struct i2c_client *slave;
>>  + enum aspeed_i2c_slave_state slave_state;
>>  +#endif
>>  +};
>>  +
>>  +struct aspeed_i2c_controller {
>>  + struct device *dev;
>>  + void __iomem *base;
>>  + int irq;
>>  + struct irq_domain *irq_domain;
>>  +};
>>  +
>>  +static inline void aspeed_i2c_write(struct aspeed_i2c_bus *bus, u32 val,
>>  + u32 reg)
>>  +{
>>  + writel(val, bus->base + reg);
>>  +}
>>  +
>>  +static inline u32 aspeed_i2c_read(struct aspeed_i2c_bus *bus, u32 reg)
>>  +{
>>  + return readl(bus->base + reg);
>>  +}
>>  +
>>  +static u8 aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus)
>>  +{
>>  + u32 command;
>>  + unsigned long time_left;
>>  + unsigned long flags;
>>  + int ret = 0;
>>  +
>>  + spin_lock_irqsave(&bus->lock, flags);
>>  + command = aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG);
>>  + /* Bus is idle: no recovery needed. */
>>  + if ((command & ASPEED_I2CD_SDA_LINE_STS) &&
>>  + (command & ASPEED_I2CD_SCL_LINE_STS))
>>  + goto out;
>>  +
>>  + dev_dbg(bus->dev, "bus hung (state %x), attempting recovery\n",
>>  + command);
>>  +
>>  + /* Bus held: put bus in stop state. */
>>  + if ((command & ASPEED_I2CD_SDA_LINE_STS) &&
>>  + !(command & ASPEED_I2CD_SCL_LINE_STS)) {
>>  + aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD,
>>  + ASPEED_I2C_CMD_REG);
>>  + reinit_completion(&bus->cmd_complete);
>>  + spin_unlock_irqrestore(&bus->lock, flags);
>>  +
>>  + time_left = wait_for_completion_interruptible_timeout(
>>  + &bus->cmd_complete, bus->adap.timeout * HZ);
>>  +
>>  + spin_lock_irqsave(&bus->lock, flags);
>>  + if (time_left == 0)
>>  + ret = -ETIMEDOUT;
>>  + else if (bus->cmd_err)
>>  + ret = -EIO;
>>  + /* Bus error. */
>>  + } else if (!(command & ASPEED_I2CD_SDA_LINE_STS)) {
>>  + aspeed_i2c_write(bus, ASPEED_I2CD_BUS_RECOVER_CMD,
>>  + ASPEED_I2C_CMD_REG);
>>  + reinit_completion(&bus->cmd_complete);
>>  + spin_unlock_irqrestore(&bus->lock, flags);
>>  +
>>  + time_left = wait_for_completion_interruptible_timeout(
>>  + &bus->cmd_complete, bus->adap.timeout * HZ);
>>  +
>>  + spin_lock_irqsave(&bus->lock, flags);
>>  + if (time_left == 0)
>>  + ret = -ETIMEDOUT;
>>  + else if (bus->cmd_err)
>>  + ret = -EIO;
>>  + /* Recovery failed. */
>>  + else if (!(aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG) &
>>  + ASPEED_I2CD_SDA_LINE_STS))
>>  + ret = -EIO;
>>  + }
>>  +
>>  +out:
>>  + spin_unlock_irqrestore(&bus->lock, flags);
>>  + return ret;
>>  +}
>>  +
>>  +#if IS_ENABLED(CONFIG_I2C_SLAVE)
>>  +static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
>>  +{
>>  + bool irq_handled = true;
>>  + u32 command;
>>  + u32 irq_status;
>>  + u32 status_ack = 0;
>>  + u8 value;
>>  + struct i2c_client *slave = bus->slave;
>>  +
>>  + spin_lock(&bus->lock);
>>  + if (!slave) {
>>  + irq_handled = false;
>>  + goto out;
>>  + }
>>  + command = aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG);
>>  + irq_status = aspeed_i2c_read(bus, ASPEED_I2C_INTR_STS_REG);
>>  +
>>  + /* Slave was requested, restart state machine. */
>>  + if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) {
>>  + status_ack |= ASPEED_I2CD_INTR_SLAVE_MATCH;
>>  + bus->slave_state = ASPEED_I2C_SLAVE_START;
>>  + }
>>  + /* Slave is not currently active, irq was for someone else. */
>>  + if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
>>  + irq_handled = false;
>>  + goto out;
>>  + }
>>  +
>>  + dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n",
>>  + irq_status, command);
>>  +
>>  + /* Slave was sent something. */
>>  + if (irq_status & ASPEED_I2CD_INTR_RX_DONE) {
>>  + value = aspeed_i2c_read(bus, ASPEED_I2C_BYTE_BUF_REG) >> 8;
>>  + /* Handle address frame. */
>>  + if (bus->slave_state == ASPEED_I2C_SLAVE_START) {
>>  + if (value & 0x1)
>>  + bus->slave_state =
>>  + ASPEED_I2C_SLAVE_READ_REQUESTED;
>>  + else
>>  + bus->slave_state =
>>  + ASPEED_I2C_SLAVE_WRITE_REQUESTED;
>>  + }
>>  + status_ack |= ASPEED_I2CD_INTR_RX_DONE;
>>  + }
>>  +
>>  + /* Slave was asked to stop. */
>>  + if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
>>  + status_ack |= ASPEED_I2CD_INTR_NORMAL_STOP;
>>  + bus->slave_state = ASPEED_I2C_SLAVE_STOP;
>>  + }
>>  + if (irq_status & ASPEED_I2CD_INTR_TX_NAK) {
>>  + status_ack |= ASPEED_I2CD_INTR_TX_NAK;
>>  + bus->slave_state = ASPEED_I2C_SLAVE_STOP;
>>  + }
>>  +
>>  + if (bus->slave_state == ASPEED_I2C_SLAVE_READ_REQUESTED) {
>>  + if (irq_status & ASPEED_I2CD_INTR_TX_ACK)
>>  + dev_err(bus->dev, "Unexpected ACK on read request.\n");
>>  + bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED;
>>  +
>>  + i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
>>  + aspeed_i2c_write(bus, value, ASPEED_I2C_BYTE_BUF_REG);
>>  + aspeed_i2c_write(bus, ASPEED_I2CD_S_TX_CMD, ASPEED_I2C_CMD_REG);
>>  + } else if (bus->slave_state == ASPEED_I2C_SLAVE_READ_PROCESSED) {
>>  + status_ack |= ASPEED_I2CD_INTR_TX_ACK;
>>  + if (!(irq_status & ASPEED_I2CD_INTR_TX_ACK))
>>  + dev_err(bus->dev,
>>  + "Expected ACK after processed read.\n");
>>  + i2c_slave_event(slave, I2C_SLAVE_READ_PROCESSED, &value);
>>  + aspeed_i2c_write(bus, value, ASPEED_I2C_BYTE_BUF_REG);
>>  + aspeed_i2c_write(bus, ASPEED_I2CD_S_TX_CMD, ASPEED_I2C_CMD_REG);
>>  + } else if (bus->slave_state == ASPEED_I2C_SLAVE_WRITE_REQUESTED) {
>>  + bus->slave_state = ASPEED_I2C_SLAVE_WRITE_RECEIVED;
>>  + i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
>>  + } else if (bus->slave_state == ASPEED_I2C_SLAVE_WRITE_RECEIVED) {
>>  + i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value);
>>  + } else if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
>>  + i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
>>  + }
>>  +
>>  + if (status_ack != irq_status)
>>  + dev_err(bus->dev,
>>  + "irq handled != irq. expected %x, but was %x\n",
>>  + irq_status, status_ack);
>>  + aspeed_i2c_write(bus, status_ack, ASPEED_I2C_INTR_STS_REG);
>>  +
>>  +out:
>>  + spin_unlock(&bus->lock);
>>  + return irq_handled;
>>  +}
>>  +#endif
>>  +
>>  +static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
>>  +{
>>  + const u32 errs = ASPEED_I2CD_INTR_ARBIT_LOSS |
>>  + ASPEED_I2CD_INTR_ABNORMAL |
>>  + ASPEED_I2CD_INTR_SCL_TIMEOUT |
>>  + ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |
>>  + ASPEED_I2CD_INTR_TX_NAK;
>>  + u32 irq_status;
>>  +
>>  + spin_lock(&bus->lock);
>>  + irq_status = aspeed_i2c_read(bus, ASPEED_I2C_INTR_STS_REG);
>>  + bus->cmd_err = irq_status & errs;
>>  +
>>  + dev_dbg(bus->dev, "master irq status 0x%08x\n", irq_status);
>>  +
>>  + /* No message to transfer. */
>>  + if (bus->cmd_err ||
>>  + (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) ||
>>  + (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE)) {
>>  + complete(&bus->cmd_complete);
>>  + goto out;
>>  + } else if (!bus->msg || bus->msg_pos >= bus->msg->len)
>>  + goto out;
>>  +
>>  + if ((bus->msg->flags & I2C_M_RD) &&
>>  + (irq_status & ASPEED_I2CD_INTR_RX_DONE)) {
>>  + bus->msg->buf[bus->msg_pos++] = aspeed_i2c_read(
>>  + bus, ASPEED_I2C_BYTE_BUF_REG) >> 8;
>>  + if (bus->msg_pos + 1 < bus->msg->len)
>>  + aspeed_i2c_write(bus, ASPEED_I2CD_M_RX_CMD,
>>  + ASPEED_I2C_CMD_REG);
>>  + else if (bus->msg_pos < bus->msg->len)
>>  + aspeed_i2c_write(bus, ASPEED_I2CD_M_RX_CMD |
>>  + ASPEED_I2CD_M_S_RX_CMD_LAST,
>>  + ASPEED_I2C_CMD_REG);
>>  + } else if (!(bus->msg->flags & I2C_M_RD) &&
>>  + (irq_status & ASPEED_I2CD_INTR_TX_ACK)) {
>>  + aspeed_i2c_write(bus, bus->msg->buf[bus->msg_pos++],
>>  + ASPEED_I2C_BYTE_BUF_REG);
>>  + aspeed_i2c_write(bus, ASPEED_I2CD_M_TX_CMD, ASPEED_I2C_CMD_REG);
>>  + }
>
> is it safe to start a new transaction when in a interrupt handler ?
>
>>  + /* Transmission complete: notify caller. */
>>  + if (bus->msg_pos >= bus->msg->len)
>>  + complete(&bus->cmd_complete);
>>  +out:
>>  + aspeed_i2c_write(bus, irq_status, ASPEED_I2C_INTR_STS_REG);
>
> so this is clearing the interrupt status just after having started
> a new transaction on the bus. It looks unsafe to me as it could
> clear the status of the just started transaction.
>
>>  + spin_unlock(&bus->lock);
>>  + return true;
>>  +}
>>  +
>>  +static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
>>  +{
>>  + struct aspeed_i2c_bus *bus = dev_id;
>>  +
>>  +#if IS_ENABLED(CONFIG_I2C_SLAVE)
>>  + if (aspeed_i2c_slave_irq(bus)) {
>>  + dev_dbg(bus->dev, "irq handled by slave.\n");
>>  + return IRQ_HANDLED;
>>  + }
>>  +#endif
>>  + if (aspeed_i2c_master_irq(bus)) {
>>  + dev_dbg(bus->dev, "irq handled by master.\n");
>>  + return IRQ_HANDLED;
>>  + }
>>  + dev_err(bus->dev, "irq not handled properly!\n");
>>  + return IRQ_HANDLED;
>>  +}
>>  +
>>  +static int aspeed_i2c_master_single_xfer(struct i2c_adapter *adap,
>>  + struct i2c_msg *msg)
>>  +{
>>  + struct aspeed_i2c_bus *bus = adap->algo_data;
>>  + unsigned long flags;
>>  + u8 slave_addr;
>>  + u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD;
>>  + int ret = msg->len;
>>  + unsigned long time_left;
>>  +
>>  + spin_lock_irqsave(&bus->lock, flags);
>>  + bus->msg = msg;
>>  + bus->msg_pos = 0;
>>  + slave_addr = msg->addr << 1;
>>  + if (msg->flags & I2C_M_RD) {
>>  + slave_addr |= 1;
>>  + command |= ASPEED_I2CD_M_RX_CMD;
>>  + if (msg->len == 1)
>>  + command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
>>  + }
>>  + aspeed_i2c_write(bus, slave_addr, ASPEED_I2C_BYTE_BUF_REG);
>>  + aspeed_i2c_write(bus, command, ASPEED_I2C_CMD_REG);
>>  + reinit_completion(&bus->cmd_complete);
>>  + spin_unlock_irqrestore(&bus->lock, flags);
>>  +
>>  + time_left = wait_for_completion_interruptible_timeout(
>>  + &bus->cmd_complete, bus->adap.timeout * HZ * msg->len);
>
> Why do you multiply by * msg->len ?
>
>>  + if (time_left == 0)
>>  + return -ETIMEDOUT;
>>  +
>>  + spin_lock_irqsave(&bus->lock, flags);
>>  + if (bus->cmd_err)
>>  + ret = -EIO;
>>  + bus->msg = NULL;
>>  + spin_unlock_irqrestore(&bus->lock, flags);
>>  +
>>  + return ret;
>>  +}
>>  +
>>  +static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
>>  + struct i2c_msg *msgs, int num)
>>  +{
>>  + struct aspeed_i2c_bus *bus = adap->algo_data;
>>  + int ret;
>>  + int i;
>>  + unsigned long flags;
>>  + unsigned long time_left;
>>  +
>>  + /* If bus is busy, attempt recovery. We assume a single master
>>  + * environment.
>>  + */
>>  + if (aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG) &
>>  + ASPEED_I2CD_BUS_BUSY_STS) {
>>  + ret = aspeed_i2c_recover_bus(bus);
>>  + if (ret)
>>  + return ret;
>>  + }
>>  +
>>  + for (i = 0; i < num; i++) {
>>  + ret = aspeed_i2c_master_single_xfer(adap, &msgs[i]);
>>  + if (ret < 0)
>>  + break;
>>  + /* TODO: Support other forms of I2C protocol mangling. */
>>  + if (msgs[i].flags & I2C_M_STOP) {
>>  + spin_lock_irqsave(&bus->lock, flags);
>>  + aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD,
>>  + ASPEED_I2C_CMD_REG);
>>  + reinit_completion(&bus->cmd_complete);
>>  + spin_unlock_irqrestore(&bus->lock, flags);
>>  +
>>  + time_left = wait_for_completion_interruptible_timeout(
>>  + &bus->cmd_complete,
>>  + bus->adap.timeout * HZ);
>>  + if (time_left == 0)
>>  + return -ETIMEDOUT;
>>  + }
>>  + }
>>  +
>>  + spin_lock_irqsave(&bus->lock, flags);
>>  + aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD, ASPEED_I2C_CMD_REG);
>>  + reinit_completion(&bus->cmd_complete);
>>  + spin_unlock_irqrestore(&bus->lock, flags);
>>  +
>>  + time_left = wait_for_completion_interruptible_timeout(
>>  + &bus->cmd_complete, bus->adap.timeout * HZ);
>>  + if (time_left == 0)
>>  + return -ETIMEDOUT;
>>  +
>>  + /* If nothing went wrong, return number of messages transferred. */
>>  + if (ret < 0)
>>  + return ret;
>>  + else
>>  + return i;
>>  +}
>>  +
>>  +static u32 aspeed_i2c_functionality(struct i2c_adapter *adap)
>>  +{
>>  + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
>>  +}
>>  +
>>  +#if IS_ENABLED(CONFIG_I2C_SLAVE)
>>  +static int aspeed_i2c_reg_slave(struct i2c_client *client)
>>  +{
>>  + struct aspeed_i2c_bus *bus;
>>  + unsigned long flags;
>>  + u32 addr_reg_val;
>>  + u32 func_ctrl_reg_val;
>>  +
>>  + bus = client->adapter->algo_data;
>>  + spin_lock_irqsave(&bus->lock, flags);
>>  + if (bus->slave) {
>>  + spin_unlock_irqrestore(&bus->lock, flags);
>>  + return -EINVAL;
>>  + }
>>  +
>>  + /* Set slave addr. */
>>  + addr_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_DEV_ADDR_REG);
>>  + addr_reg_val &= ~ASPEED_I2CD_DEV_ADDR_MASK;
>>  + addr_reg_val |= client->addr & ASPEED_I2CD_DEV_ADDR_MASK;
>>  + aspeed_i2c_write(bus, addr_reg_val, ASPEED_I2C_DEV_ADDR_REG);
>>  +
>>  + /* Switch from master mode to slave mode. */
>>  + func_ctrl_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG);
>>  + func_ctrl_reg_val &= ~ASPEED_I2CD_MASTER_EN;
>>  + func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN;
>>  + aspeed_i2c_write(bus, func_ctrl_reg_val, ASPEED_I2C_FUN_CTRL_REG);
>>  +
>>  + bus->slave = client;
>>  + bus->slave_state = ASPEED_I2C_SLAVE_STOP;
>>  + spin_unlock_irqrestore(&bus->lock, flags);
>>  + return 0;
>>  +}
>>  +
>>  +static int aspeed_i2c_unreg_slave(struct i2c_client *client)
>>  +{
>>  + struct aspeed_i2c_bus *bus = client->adapter->algo_data;
>>  + unsigned long flags;
>>  + u32 func_ctrl_reg_val;
>>  +
>>  + spin_lock_irqsave(&bus->lock, flags);
>>  + if (!bus->slave) {
>>  + spin_unlock_irqrestore(&bus->lock, flags);
>>  + return -EINVAL;
>>  + }
>>  +
>>  + /* Switch from slave mode to master mode. */
>>  + func_ctrl_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG);
>>  + func_ctrl_reg_val &= ~ASPEED_I2CD_SLAVE_EN;
>>  + func_ctrl_reg_val |= ASPEED_I2CD_MASTER_EN;
>>  + aspeed_i2c_write(bus, func_ctrl_reg_val, ASPEED_I2C_FUN_CTRL_REG);
>>  +
>>  + bus->slave = NULL;
>>  + spin_unlock_irqrestore(&bus->lock, flags);
>>  + return 0;
>>  +}
>>  +#endif
>>  +
>>  +static const struct i2c_algorithm aspeed_i2c_algo = {
>>  + .master_xfer = aspeed_i2c_master_xfer,
>>  + .functionality = aspeed_i2c_functionality,
>>  +#if IS_ENABLED(CONFIG_I2C_SLAVE)
>>  + .reg_slave = aspeed_i2c_reg_slave,
>>  + .unreg_slave = aspeed_i2c_unreg_slave,
>>  +#endif
>>  +};
>>  +
>>  +static u32 aspeed_i2c_get_clk_reg_val(u32 divider_ratio)
>>  +{
>>  + unsigned int inc = 0, div;
>>  + u32 scl_low, scl_high, data;
>>  +
>>  + for (div = 0; divider_ratio >= 16; div++) {
>>  + inc |= (divider_ratio & 1);
>>  + divider_ratio >>= 1;
>>  + }
>>  + divider_ratio += inc;
>>  + scl_low = (divider_ratio >> 1) - 1;
>>  + scl_high = divider_ratio - scl_low - 2;
>>  + data = 0x77700300 | (scl_high << 16) | (scl_low << 12) | div;
>>  + return data;
>>  +}
>>  +
>>  +static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus,
>>  + struct platform_device *pdev)
>>  +{
>>  + struct clk *pclk;
>>  + u32 clk_freq;
>>  + u32 divider_ratio;
>>  + int ret;
>>  +
>>  + pclk = devm_clk_get(&pdev->dev, NULL);
>>  + if (IS_ERR(pclk)) {
>>  + dev_err(&pdev->dev, "clk_get failed\n");
>>  + return PTR_ERR(pclk);
>>  + }
>>  + ret = of_property_read_u32(pdev->dev.of_node,
>>  + "clock-frequency", &clk_freq);
>>  + if (ret < 0) {
>>  + dev_err(&pdev->dev,
>>  + "Could not read clock-frequency property\n");
>>  + clk_freq = 100000;
>>  + }
>>  + divider_ratio = clk_get_rate(pclk) / clk_freq;
>>  + /* We just need the clock rate, we don't actually use the clk object. */
>>  + devm_clk_put(&pdev->dev, pclk);
>>  +
>>  + /* Set AC Timing */
>>  + if (clk_freq / 1000 > 400) {
>>  + aspeed_i2c_write(bus, aspeed_i2c_read(bus,
>>  + ASPEED_I2C_FUN_CTRL_REG) |
>>  + ASPEED_I2CD_M_HIGH_SPEED_EN |
>>  + ASPEED_I2CD_M_SDA_DRIVE_1T_EN |
>>  + ASPEED_I2CD_SDA_DRIVE_1T_EN,
>>  + ASPEED_I2C_FUN_CTRL_REG);
>>  +
>>  + aspeed_i2c_write(bus, 0x3, ASPEED_I2C_AC_TIMING_REG2);
>>  + aspeed_i2c_write(bus, aspeed_i2c_get_clk_reg_val(divider_ratio),
>>  + ASPEED_I2C_AC_TIMING_REG1);
>>  + } else {
>>  + aspeed_i2c_write(bus, aspeed_i2c_get_clk_reg_val(divider_ratio),
>>  + ASPEED_I2C_AC_TIMING_REG1);
>>  + aspeed_i2c_write(bus, ASPEED_NO_TIMEOUT_CTRL,
>>  + ASPEED_I2C_AC_TIMING_REG2);
>>  + }
>>  +
>>  + return 0;
>>  +}
>>  +
>>  +static void noop(struct irq_data *data) { }
>>  +
>>  +static struct irq_chip aspeed_i2c_irqchip = {
>>  + .name = "ast-i2c",
>>  + .irq_unmask = noop,
>>  + .irq_mask = noop,
>>  +};
>>  +
>>  +static int aspeed_i2c_probe_bus(struct platform_device *pdev)
>>  +{
>>  + struct aspeed_i2c_bus *bus;
>>  + struct aspeed_i2c_controller *controller =
>>  + dev_get_drvdata(pdev->dev.parent);
>>  + struct resource *res;
>>  + int ret, irq;
>>  + u32 hwirq;
>>  +
>>  + bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
>>  + if (!bus)
>>  + return -ENOMEM;
>>  +
>>  + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>  + bus->base = devm_ioremap_resource(&pdev->dev, res);
>>  + if (IS_ERR(bus->base))
>>  + return PTR_ERR(bus->base);
>>  +
>>  + bus->irq = platform_get_irq(pdev, 0);
>>  + if (bus->irq < 0)
>>  + return -ENXIO;
>>  + ret = of_property_read_u32(pdev->dev.of_node, "interrupts", &hwirq);
>>  + if (ret < 0) {
>>  + dev_err(&pdev->dev, "no I2C 'interrupts' property\n");
>>  + return -ENXIO;
>>  + }
>>  + irq = irq_create_mapping(controller->irq_domain, hwirq);
>>  + irq_set_chip_data(irq, controller);
>>  + irq_set_chip_and_handler(irq, &aspeed_i2c_irqchip, handle_simple_irq);
>>  + ret = devm_request_irq(&pdev->dev, bus->irq, aspeed_i2c_bus_irq,
>>  + 0, dev_name(&pdev->dev), bus);
>>  + if (ret) {
>>  + dev_err(&pdev->dev, "failed to request interrupt\n");
>>  + return -ENXIO;
>>  + }
>>  +
>>  + /* Initialize the I2C adapter */
>>  + spin_lock_init(&bus->lock);
>>  + init_completion(&bus->cmd_complete);
>>  + bus->adap.owner = THIS_MODULE;
>>  + bus->adap.retries = 0;
>>  + bus->adap.timeout = 5;
>>  + bus->adap.algo = &aspeed_i2c_algo;
>>  + bus->adap.algo_data = bus;
>>  + bus->adap.dev.parent = &pdev->dev;
>>  + bus->adap.dev.of_node = pdev->dev.of_node;
>>  + snprintf(bus->adap.name, sizeof(bus->adap.name), "Aspeed i2c");
>>  +
>>  + bus->dev = &pdev->dev;
>>  +
>>  + /* reset device: disable master & slave functions */
>>  + aspeed_i2c_write(bus, 0, ASPEED_I2C_FUN_CTRL_REG);
>>  +
>>  + ret = aspeed_i2c_init_clk(bus, pdev);
>>  + if (ret < 0)
>>  + return ret;
>>  +
>>  + /* Enable Master Mode */
>>  + aspeed_i2c_write(bus, aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG) |
>>  + ASPEED_I2CD_MASTER_EN |
>>  + ASPEED_I2CD_MULTI_MASTER_DIS, ASPEED_I2C_FUN_CTRL_REG);
>>  +
>>  + /* Set interrupt generation of I2C controller */
>>  + aspeed_i2c_write(bus, ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |
>>  + ASPEED_I2CD_INTR_BUS_RECOVER_DONE |
>>  + ASPEED_I2CD_INTR_SCL_TIMEOUT |
>>  + ASPEED_I2CD_INTR_ABNORMAL |
>>  + ASPEED_I2CD_INTR_NORMAL_STOP |
>>  + ASPEED_I2CD_INTR_ARBIT_LOSS |
>>  + ASPEED_I2CD_INTR_RX_DONE |
>>  + ASPEED_I2CD_INTR_TX_NAK |
>>  + ASPEED_I2CD_INTR_TX_ACK,
>>  + ASPEED_I2C_INTR_CTRL_REG);
>>  +
>>  + ret = i2c_add_adapter(&bus->adap);
>>  + if (ret < 0)
>>  + return -ENXIO;
>>  +
>>  + platform_set_drvdata(pdev, bus);
>>  +
>>  + dev_info(bus->dev, "i2c bus %d registered, irq %d\n",
>>  + bus->adap.nr, bus->irq);
>>  +
>>  + return 0;
>>  +}
>>  +
>>  +static int aspeed_i2c_remove_bus(struct platform_device *pdev)
>>  +{
>>  + struct aspeed_i2c_bus *bus = platform_get_drvdata(pdev);
>>  +
>>  + i2c_del_adapter(&bus->adap);
>>  + return 0;
>>  +}
>>  +
>>  +static const struct of_device_id aspeed_i2c_bus_of_table[] = {
>>  + { .compatible = "aspeed,ast2400-i2c-bus", },
>>  + { .compatible = "aspeed,ast2500-i2c-bus", },
>>  + { },
>>  +};
>>  +MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table);
>>  +
>>  +static struct platform_driver aspeed_i2c_bus_driver = {
>>  + .probe = aspeed_i2c_probe_bus,
>>  + .remove = aspeed_i2c_remove_bus,
>>  + .driver = {
>>  + .name = "ast-i2c-bus",
>>  + .of_match_table = aspeed_i2c_bus_of_table,
>>  + },
>>  +};
>>  +
>>  +static void aspeed_i2c_controller_irq(struct irq_desc *desc)
>>  +{
>>  + struct aspeed_i2c_controller *c = irq_desc_get_handler_data(desc);
>>  + unsigned long p, status;
>>  + unsigned int bus_irq;
>>  +
>>  + status = readl(c->base);
>>  + for_each_set_bit(p, &status, ASPEED_I2C_NUM_BUS) {
>>  + bus_irq = irq_find_mapping(c->irq_domain, p);
>>  + generic_handle_irq(bus_irq);
>>  + }
>>  +}
>>  +
>>  +static int aspeed_i2c_probe_controller(struct platform_device *pdev)
>>  +{
>>  + struct aspeed_i2c_controller *controller;
>>  + struct device_node *np;
>>  + struct resource *res;
>>  +
>>  + controller = kzalloc(sizeof(*controller), GFP_KERNEL);
>
> use devm_kzalloc() may be ?
>
> C.
>
>>  + if (!controller)
>>  + return -ENOMEM;
>>  +
>>  + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>  + controller->base = devm_ioremap_resource(&pdev->dev, res);
>>  + if (IS_ERR(controller->base))
>>  + return PTR_ERR(controller->base);
>>  +
>>  + controller->irq = platform_get_irq(pdev, 0);
>>  + if (controller->irq < 0)
>>  + return -ENXIO;
>>  +
>>  + controller->irq_domain = irq_domain_add_linear(pdev->dev.of_node,
>>  + ASPEED_I2C_NUM_BUS, &irq_domain_simple_ops, NULL);
>>  + if (!controller->irq_domain)
>>  + return -ENXIO;
>>  + controller->irq_domain->name = "ast-i2c-domain";
>>  +
>>  + irq_set_chained_handler_and_data(controller->irq,
>>  + aspeed_i2c_controller_irq, controller);
>>  +
>>  + controller->dev = &pdev->dev;
>>  +
>>  + platform_set_drvdata(pdev, controller);
>>  +
>>  + dev_info(controller->dev, "i2c controller registered, irq %d\n",
>>  + controller->irq);
>>  +
>>  + for_each_child_of_node(pdev->dev.of_node, np) {
>>  + of_platform_device_create(np, NULL, &pdev->dev);
>>  + of_node_put(np);
>>  + }
>>  +
>>  + return 0;
>>  +}
>>  +
>>  +static int aspeed_i2c_remove_controller(struct platform_device *pdev)
>>  +{
>>  + struct aspeed_i2c_controller *controller = platform_get_drvdata(pdev);
>>  +
>>  + irq_domain_remove(controller->irq_domain);
>>  + return 0;
>>  +}
>>  +
>>  +static const struct of_device_id aspeed_i2c_controller_of_table[] = {
>>  + { .compatible = "aspeed,ast2400-i2c-controller", },
>>  + { .compatible = "aspeed,ast2500-i2c-controller", },
>>  + { },
>>  +};
>>  +MODULE_DEVICE_TABLE(of, aspeed_i2c_controller_of_table);
>>  +
>>  +static struct platform_driver aspeed_i2c_controller_driver = {
>>  + .probe = aspeed_i2c_probe_controller,
>>  + .remove = aspeed_i2c_remove_controller,
>>  + .driver = {
>>  + .name = "ast-i2c-controller",
>>  + .of_match_table = aspeed_i2c_controller_of_table,
>>  + },
>>  +};
>>  +
>>  +static int __init aspeed_i2c_driver_init(void)
>>  +{
>>  + int ret;
>>  +
>>  + ret = platform_driver_register(&aspeed_i2c_controller_driver);
>>  + if (ret < 0)
>>  + return ret;
>>  + return platform_driver_register(&aspeed_i2c_bus_driver);
>>  +}
>>  +module_init(aspeed_i2c_driver_init);
>>  +
>>  +static void __exit aspeed_i2c_driver_exit(void)
>>  +{
>>  + platform_driver_unregister(&aspeed_i2c_bus_driver);
>>  + platform_driver_unregister(&aspeed_i2c_controller_driver);
>>  +}
>>  +module_exit(aspeed_i2c_driver_exit);
>>  +
>>  +MODULE_AUTHOR("Brendan Higgins <brendanhiggins-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>");
>>  +MODULE_DESCRIPTION("Aspeed I2C Bus Driver");
>>  +MODULE_LICENSE("GPL");
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v4 1/2] i2c: aspeed: added driver for Aspeed I2C

[Kachalov Anton]

Hello.

I would like to add my five cents here. Do not limit the bus_clk with 400kHz (FM) while HighSpeed is above 1MHz (above FM+ devices). I've successfully tested FM+ (1Mhz) in a quite big i2c network (a number of pca9600, pca9675, pca9848) with at least eight AST2150 SoCs on the common bus.

BTW. Just a lame question. If the device isn't designed to work on the higher speed (like standard of FM) while the bus selected as FM+, would those kind of devices just unoperate or may have undefined behavior and disturb the SDA/SCL? Just wondering to dynamically slowdown down to 100Khz (if needed) for the specific slave, but keep high rate (FM+) at the normal operation.

--- source/drivers/i2c/busses/i2c-aspeed.c.orig	2016-11-18 19:17:41.000000000 +0300
+++ source/drivers/i2c/busses/i2c-aspeed.c	2016-11-18 19:17:49.682092658 +0300
@@ -310,7 +310,7 @@ static void ast_i2c_dev_init(struct ast_
 			bus->bus_clk, clk_get_rate(bus->pclk));
 
 	/* Set AC Timing */
-	if(bus->bus_clk / 1000 > 400) {
+	if(bus->bus_clk / 1000 > 1000) {
 		ast_i2c_write(bus, ast_i2c_read(bus, I2C_FUN_CTRL_REG) |
 				AST_I2CD_M_HIGH_SPEED_EN |
 				AST_I2CD_M_SDA_DRIVE_1T_EN |

22.11.2016, 12:07, "Cédric Le Goater" <clg@kaod.org>:
> Hello Brendan,
>
> A few comments below,
>
> On 11/05/2016 02:58 AM, Brendan Higgins wrote:
>>  Added initial master and slave support for Aspeed I2C controller.
>>  Supports fourteen busses present in ast24xx and ast25xx BMC SoCs by
>>  Aspeed.
>>
>>  Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
>>  ---
>>  Changes for v2:
>>    - Added single module_init (multiple was breaking some builds).
>>  Changes for v3:
>>    - Removed "bus" device tree param; now extracted from bus address offset
>>  Changes for v4:
>>    - I2C adapter number is now generated dynamically unless specified in alias.
>>  ---
>>   drivers/i2c/busses/Kconfig | 10 +
>>   drivers/i2c/busses/Makefile | 1 +
>>   drivers/i2c/busses/i2c-aspeed.c | 807 ++++++++++++++++++++++++++++++++++++++++
>>   3 files changed, 818 insertions(+)
>>   create mode 100644 drivers/i2c/busses/i2c-aspeed.c
>>
>>  diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
>>  index d252276..b6caa5d 100644
>>  --- a/drivers/i2c/busses/Kconfig
>>  +++ b/drivers/i2c/busses/Kconfig
>>  @@ -1009,6 +1009,16 @@ config I2C_RCAR
>>             This driver can also be built as a module. If so, the module
>>             will be called i2c-rcar.
>>
>>  +config I2C_ASPEED
>>  + tristate "Aspeed AST2xxx SoC I2C Controller"
>>  + depends on ARCH_ASPEED
>>  + help
>>  + If you say yes to this option, support will be included for the
>>  + Aspeed AST2xxx SoC I2C controller.
>>  +
>>  + This driver can also be built as a module. If so, the module
>>  + will be called i2c-aspeed.
>>  +
>>   comment "External I2C/SMBus adapter drivers"
>>
>>   config I2C_DIOLAN_U2C
>>  diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
>>  index 29764cc..826e780 100644
>>  --- a/drivers/i2c/busses/Makefile
>>  +++ b/drivers/i2c/busses/Makefile
>>  @@ -99,6 +99,7 @@ obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o
>>   obj-$(CONFIG_I2C_XLR) += i2c-xlr.o
>>   obj-$(CONFIG_I2C_XLP9XX) += i2c-xlp9xx.o
>>   obj-$(CONFIG_I2C_RCAR) += i2c-rcar.o
>>  +obj-$(CONFIG_I2C_ASPEED) += i2c-aspeed.o
>>
>>   # External I2C/SMBus adapter drivers
>>   obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o
>>  diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
>>  new file mode 100644
>>  index 0000000..88e078a
>>  --- /dev/null
>>  +++ b/drivers/i2c/busses/i2c-aspeed.c
>>  @@ -0,0 +1,807 @@
>>  +/*
>>  + * I2C adapter for the ASPEED I2C bus.
>>  + *
>>  + * Copyright (C) 2012-2020 ASPEED Technology Inc.
>>  + * Copyright 2016 IBM Corporation
>>  + * Copyright 2016 Google, Inc.
>>  + *
>>  + * This program is free software; you can redistribute it and/or modify
>>  + * it under the terms of the GNU General Public License version 2 as
>>  + * published by the Free Software Foundation.
>>  + */
>>  +
>>  +#include <linux/kernel.h>
>>  +#include <linux/module.h>
>>  +#include <linux/i2c.h>
>>  +#include <linux/irq.h>
>>  +#include <linux/irqdomain.h>
>>  +#include <linux/init.h>
>>  +#include <linux/io.h>
>>  +#include <linux/errno.h>
>>  +#include <linux/interrupt.h>
>>  +#include <linux/completion.h>
>>  +#include <linux/slab.h>
>>  +#include <linux/of_address.h>
>>  +#include <linux/of_platform.h>
>>  +#include <linux/platform_device.h>
>>  +#include <linux/err.h>
>>  +#include <linux/clk.h>
>>  +
>>  +/* I2C Register */
>>  +#define ASPEED_I2C_FUN_CTRL_REG 0x00
>>  +#define ASPEED_I2C_AC_TIMING_REG1 0x04
>>  +#define ASPEED_I2C_AC_TIMING_REG2 0x08
>>  +#define ASPEED_I2C_INTR_CTRL_REG 0x0c
>>  +#define ASPEED_I2C_INTR_STS_REG 0x10
>>  +#define ASPEED_I2C_CMD_REG 0x14
>>  +#define ASPEED_I2C_DEV_ADDR_REG 0x18
>>  +#define ASPEED_I2C_BYTE_BUF_REG 0x20
>>  +#define ASPEED_I2C_OFFSET_START 0x40
>>  +#define ASPEED_I2C_OFFSET_INCREMENT 0x40
>>  +
>>  +#define ASPEED_I2C_NUM_BUS 14
>>  +
>>  +/* Global Register Definition */
>>  +/* 0x00 : I2C Interrupt Status Register */
>>  +/* 0x08 : I2C Interrupt Target Assignment */
>>  +
>>  +/* Device Register Definition */
>>  +/* 0x00 : I2CD Function Control Register */
>>  +#define ASPEED_I2CD_MULTI_MASTER_DIS BIT(15)
>>  +#define ASPEED_I2CD_SDA_DRIVE_1T_EN BIT(8)
>>  +#define ASPEED_I2CD_M_SDA_DRIVE_1T_EN BIT(7)
>>  +#define ASPEED_I2CD_M_HIGH_SPEED_EN BIT(6)
>>  +#define ASPEED_I2CD_SLAVE_EN BIT(1)
>>  +#define ASPEED_I2CD_MASTER_EN BIT(0)
>>  +
>>  +/* 0x08 : I2CD Clock and AC Timing Control Register #2 */
>>  +#define ASPEED_NO_TIMEOUT_CTRL 0
>>  +
>>  +
>>  +/* 0x0c : I2CD Interrupt Control Register &
>>  + * 0x10 : I2CD Interrupt Status Register
>>  + *
>>  + * These share bit definitions, so use the same values for the enable &
>>  + * status bits.
>>  + */
>>  +#define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT BIT(14)
>>  +#define ASPEED_I2CD_INTR_BUS_RECOVER_DONE BIT(13)
>>  +#define ASPEED_I2CD_INTR_SLAVE_MATCH BIT(7)
>>  +#define ASPEED_I2CD_INTR_SCL_TIMEOUT BIT(6)
>>  +#define ASPEED_I2CD_INTR_ABNORMAL BIT(5)
>>  +#define ASPEED_I2CD_INTR_NORMAL_STOP BIT(4)
>>  +#define ASPEED_I2CD_INTR_ARBIT_LOSS BIT(3)
>>  +#define ASPEED_I2CD_INTR_RX_DONE BIT(2)
>>  +#define ASPEED_I2CD_INTR_TX_NAK BIT(1)
>>  +#define ASPEED_I2CD_INTR_TX_ACK BIT(0)
>>  +
>>  +/* 0x14 : I2CD Command/Status Register */
>>  +#define ASPEED_I2CD_SCL_LINE_STS BIT(18)
>>  +#define ASPEED_I2CD_SDA_LINE_STS BIT(17)
>>  +#define ASPEED_I2CD_BUS_BUSY_STS BIT(16)
>>  +#define ASPEED_I2CD_BUS_RECOVER_CMD BIT(11)
>>  +
>>  +/* Command Bit */
>>  +#define ASPEED_I2CD_M_STOP_CMD BIT(5)
>>  +#define ASPEED_I2CD_M_S_RX_CMD_LAST BIT(4)
>>  +#define ASPEED_I2CD_M_RX_CMD BIT(3)
>>  +#define ASPEED_I2CD_S_TX_CMD BIT(2)
>>  +#define ASPEED_I2CD_M_TX_CMD BIT(1)
>>  +#define ASPEED_I2CD_M_START_CMD BIT(0)
>>  +
>>  +/* 0x18 : I2CD Slave Device Address Register */
>>  +#define ASPEED_I2CD_DEV_ADDR_MASK GENMASK(6, 0)
>>  +
>>  +enum aspeed_i2c_slave_state {
>>  + ASPEED_I2C_SLAVE_START,
>>  + ASPEED_I2C_SLAVE_READ_REQUESTED,
>>  + ASPEED_I2C_SLAVE_READ_PROCESSED,
>>  + ASPEED_I2C_SLAVE_WRITE_REQUESTED,
>>  + ASPEED_I2C_SLAVE_WRITE_RECEIVED,
>>  + ASPEED_I2C_SLAVE_STOP,
>>  +};
>>  +
>>  +struct aspeed_i2c_bus {
>>  + struct i2c_adapter adap;
>>  + struct device *dev;
>>  + void __iomem *base;
>>  + spinlock_t lock;
>>  + struct completion cmd_complete;
>>  + int irq;
>>  + /* Transaction state. */
>>  + struct i2c_msg *msg;
>>  + int msg_pos;
>>  + u32 cmd_err;
>>  +#if IS_ENABLED(CONFIG_I2C_SLAVE)
>>  + struct i2c_client *slave;
>>  + enum aspeed_i2c_slave_state slave_state;
>>  +#endif
>>  +};
>>  +
>>  +struct aspeed_i2c_controller {
>>  + struct device *dev;
>>  + void __iomem *base;
>>  + int irq;
>>  + struct irq_domain *irq_domain;
>>  +};
>>  +
>>  +static inline void aspeed_i2c_write(struct aspeed_i2c_bus *bus, u32 val,
>>  + u32 reg)
>>  +{
>>  + writel(val, bus->base + reg);
>>  +}
>>  +
>>  +static inline u32 aspeed_i2c_read(struct aspeed_i2c_bus *bus, u32 reg)
>>  +{
>>  + return readl(bus->base + reg);
>>  +}
>>  +
>>  +static u8 aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus)
>>  +{
>>  + u32 command;
>>  + unsigned long time_left;
>>  + unsigned long flags;
>>  + int ret = 0;
>>  +
>>  + spin_lock_irqsave(&bus->lock, flags);
>>  + command = aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG);
>>  + /* Bus is idle: no recovery needed. */
>>  + if ((command & ASPEED_I2CD_SDA_LINE_STS) &&
>>  + (command & ASPEED_I2CD_SCL_LINE_STS))
>>  + goto out;
>>  +
>>  + dev_dbg(bus->dev, "bus hung (state %x), attempting recovery\n",
>>  + command);
>>  +
>>  + /* Bus held: put bus in stop state. */
>>  + if ((command & ASPEED_I2CD_SDA_LINE_STS) &&
>>  + !(command & ASPEED_I2CD_SCL_LINE_STS)) {
>>  + aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD,
>>  + ASPEED_I2C_CMD_REG);
>>  + reinit_completion(&bus->cmd_complete);
>>  + spin_unlock_irqrestore(&bus->lock, flags);
>>  +
>>  + time_left = wait_for_completion_interruptible_timeout(
>>  + &bus->cmd_complete, bus->adap.timeout * HZ);
>>  +
>>  + spin_lock_irqsave(&bus->lock, flags);
>>  + if (time_left == 0)
>>  + ret = -ETIMEDOUT;
>>  + else if (bus->cmd_err)
>>  + ret = -EIO;
>>  + /* Bus error. */
>>  + } else if (!(command & ASPEED_I2CD_SDA_LINE_STS)) {
>>  + aspeed_i2c_write(bus, ASPEED_I2CD_BUS_RECOVER_CMD,
>>  + ASPEED_I2C_CMD_REG);
>>  + reinit_completion(&bus->cmd_complete);
>>  + spin_unlock_irqrestore(&bus->lock, flags);
>>  +
>>  + time_left = wait_for_completion_interruptible_timeout(
>>  + &bus->cmd_complete, bus->adap.timeout * HZ);
>>  +
>>  + spin_lock_irqsave(&bus->lock, flags);
>>  + if (time_left == 0)
>>  + ret = -ETIMEDOUT;
>>  + else if (bus->cmd_err)
>>  + ret = -EIO;
>>  + /* Recovery failed. */
>>  + else if (!(aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG) &
>>  + ASPEED_I2CD_SDA_LINE_STS))
>>  + ret = -EIO;
>>  + }
>>  +
>>  +out:
>>  + spin_unlock_irqrestore(&bus->lock, flags);
>>  + return ret;
>>  +}
>>  +
>>  +#if IS_ENABLED(CONFIG_I2C_SLAVE)
>>  +static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
>>  +{
>>  + bool irq_handled = true;
>>  + u32 command;
>>  + u32 irq_status;
>>  + u32 status_ack = 0;
>>  + u8 value;
>>  + struct i2c_client *slave = bus->slave;
>>  +
>>  + spin_lock(&bus->lock);
>>  + if (!slave) {
>>  + irq_handled = false;
>>  + goto out;
>>  + }
>>  + command = aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG);
>>  + irq_status = aspeed_i2c_read(bus, ASPEED_I2C_INTR_STS_REG);
>>  +
>>  + /* Slave was requested, restart state machine. */
>>  + if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) {
>>  + status_ack |= ASPEED_I2CD_INTR_SLAVE_MATCH;
>>  + bus->slave_state = ASPEED_I2C_SLAVE_START;
>>  + }
>>  + /* Slave is not currently active, irq was for someone else. */
>>  + if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
>>  + irq_handled = false;
>>  + goto out;
>>  + }
>>  +
>>  + dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n",
>>  + irq_status, command);
>>  +
>>  + /* Slave was sent something. */
>>  + if (irq_status & ASPEED_I2CD_INTR_RX_DONE) {
>>  + value = aspeed_i2c_read(bus, ASPEED_I2C_BYTE_BUF_REG) >> 8;
>>  + /* Handle address frame. */
>>  + if (bus->slave_state == ASPEED_I2C_SLAVE_START) {
>>  + if (value & 0x1)
>>  + bus->slave_state =
>>  + ASPEED_I2C_SLAVE_READ_REQUESTED;
>>  + else
>>  + bus->slave_state =
>>  + ASPEED_I2C_SLAVE_WRITE_REQUESTED;
>>  + }
>>  + status_ack |= ASPEED_I2CD_INTR_RX_DONE;
>>  + }
>>  +
>>  + /* Slave was asked to stop. */
>>  + if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
>>  + status_ack |= ASPEED_I2CD_INTR_NORMAL_STOP;
>>  + bus->slave_state = ASPEED_I2C_SLAVE_STOP;
>>  + }
>>  + if (irq_status & ASPEED_I2CD_INTR_TX_NAK) {
>>  + status_ack |= ASPEED_I2CD_INTR_TX_NAK;
>>  + bus->slave_state = ASPEED_I2C_SLAVE_STOP;
>>  + }
>>  +
>>  + if (bus->slave_state == ASPEED_I2C_SLAVE_READ_REQUESTED) {
>>  + if (irq_status & ASPEED_I2CD_INTR_TX_ACK)
>>  + dev_err(bus->dev, "Unexpected ACK on read request.\n");
>>  + bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED;
>>  +
>>  + i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
>>  + aspeed_i2c_write(bus, value, ASPEED_I2C_BYTE_BUF_REG);
>>  + aspeed_i2c_write(bus, ASPEED_I2CD_S_TX_CMD, ASPEED_I2C_CMD_REG);
>>  + } else if (bus->slave_state == ASPEED_I2C_SLAVE_READ_PROCESSED) {
>>  + status_ack |= ASPEED_I2CD_INTR_TX_ACK;
>>  + if (!(irq_status & ASPEED_I2CD_INTR_TX_ACK))
>>  + dev_err(bus->dev,
>>  + "Expected ACK after processed read.\n");
>>  + i2c_slave_event(slave, I2C_SLAVE_READ_PROCESSED, &value);
>>  + aspeed_i2c_write(bus, value, ASPEED_I2C_BYTE_BUF_REG);
>>  + aspeed_i2c_write(bus, ASPEED_I2CD_S_TX_CMD, ASPEED_I2C_CMD_REG);
>>  + } else if (bus->slave_state == ASPEED_I2C_SLAVE_WRITE_REQUESTED) {
>>  + bus->slave_state = ASPEED_I2C_SLAVE_WRITE_RECEIVED;
>>  + i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
>>  + } else if (bus->slave_state == ASPEED_I2C_SLAVE_WRITE_RECEIVED) {
>>  + i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value);
>>  + } else if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
>>  + i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
>>  + }
>>  +
>>  + if (status_ack != irq_status)
>>  + dev_err(bus->dev,
>>  + "irq handled != irq. expected %x, but was %x\n",
>>  + irq_status, status_ack);
>>  + aspeed_i2c_write(bus, status_ack, ASPEED_I2C_INTR_STS_REG);
>>  +
>>  +out:
>>  + spin_unlock(&bus->lock);
>>  + return irq_handled;
>>  +}
>>  +#endif
>>  +
>>  +static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
>>  +{
>>  + const u32 errs = ASPEED_I2CD_INTR_ARBIT_LOSS |
>>  + ASPEED_I2CD_INTR_ABNORMAL |
>>  + ASPEED_I2CD_INTR_SCL_TIMEOUT |
>>  + ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |
>>  + ASPEED_I2CD_INTR_TX_NAK;
>>  + u32 irq_status;
>>  +
>>  + spin_lock(&bus->lock);
>>  + irq_status = aspeed_i2c_read(bus, ASPEED_I2C_INTR_STS_REG);
>>  + bus->cmd_err = irq_status & errs;
>>  +
>>  + dev_dbg(bus->dev, "master irq status 0x%08x\n", irq_status);
>>  +
>>  + /* No message to transfer. */
>>  + if (bus->cmd_err ||
>>  + (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) ||
>>  + (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE)) {
>>  + complete(&bus->cmd_complete);
>>  + goto out;
>>  + } else if (!bus->msg || bus->msg_pos >= bus->msg->len)
>>  + goto out;
>>  +
>>  + if ((bus->msg->flags & I2C_M_RD) &&
>>  + (irq_status & ASPEED_I2CD_INTR_RX_DONE)) {
>>  + bus->msg->buf[bus->msg_pos++] = aspeed_i2c_read(
>>  + bus, ASPEED_I2C_BYTE_BUF_REG) >> 8;
>>  + if (bus->msg_pos + 1 < bus->msg->len)
>>  + aspeed_i2c_write(bus, ASPEED_I2CD_M_RX_CMD,
>>  + ASPEED_I2C_CMD_REG);
>>  + else if (bus->msg_pos < bus->msg->len)
>>  + aspeed_i2c_write(bus, ASPEED_I2CD_M_RX_CMD |
>>  + ASPEED_I2CD_M_S_RX_CMD_LAST,
>>  + ASPEED_I2C_CMD_REG);
>>  + } else if (!(bus->msg->flags & I2C_M_RD) &&
>>  + (irq_status & ASPEED_I2CD_INTR_TX_ACK)) {
>>  + aspeed_i2c_write(bus, bus->msg->buf[bus->msg_pos++],
>>  + ASPEED_I2C_BYTE_BUF_REG);
>>  + aspeed_i2c_write(bus, ASPEED_I2CD_M_TX_CMD, ASPEED_I2C_CMD_REG);
>>  + }
>
> is it safe to start a new transaction when in a interrupt handler ?
>
>>  + /* Transmission complete: notify caller. */
>>  + if (bus->msg_pos >= bus->msg->len)
>>  + complete(&bus->cmd_complete);
>>  +out:
>>  + aspeed_i2c_write(bus, irq_status, ASPEED_I2C_INTR_STS_REG);
>
> so this is clearing the interrupt status just after having started
> a new transaction on the bus. It looks unsafe to me as it could
> clear the status of the just started transaction.
>
>>  + spin_unlock(&bus->lock);
>>  + return true;
>>  +}
>>  +
>>  +static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
>>  +{
>>  + struct aspeed_i2c_bus *bus = dev_id;
>>  +
>>  +#if IS_ENABLED(CONFIG_I2C_SLAVE)
>>  + if (aspeed_i2c_slave_irq(bus)) {
>>  + dev_dbg(bus->dev, "irq handled by slave.\n");
>>  + return IRQ_HANDLED;
>>  + }
>>  +#endif
>>  + if (aspeed_i2c_master_irq(bus)) {
>>  + dev_dbg(bus->dev, "irq handled by master.\n");
>>  + return IRQ_HANDLED;
>>  + }
>>  + dev_err(bus->dev, "irq not handled properly!\n");
>>  + return IRQ_HANDLED;
>>  +}
>>  +
>>  +static int aspeed_i2c_master_single_xfer(struct i2c_adapter *adap,
>>  + struct i2c_msg *msg)
>>  +{
>>  + struct aspeed_i2c_bus *bus = adap->algo_data;
>>  + unsigned long flags;
>>  + u8 slave_addr;
>>  + u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD;
>>  + int ret = msg->len;
>>  + unsigned long time_left;
>>  +
>>  + spin_lock_irqsave(&bus->lock, flags);
>>  + bus->msg = msg;
>>  + bus->msg_pos = 0;
>>  + slave_addr = msg->addr << 1;
>>  + if (msg->flags & I2C_M_RD) {
>>  + slave_addr |= 1;
>>  + command |= ASPEED_I2CD_M_RX_CMD;
>>  + if (msg->len == 1)
>>  + command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
>>  + }
>>  + aspeed_i2c_write(bus, slave_addr, ASPEED_I2C_BYTE_BUF_REG);
>>  + aspeed_i2c_write(bus, command, ASPEED_I2C_CMD_REG);
>>  + reinit_completion(&bus->cmd_complete);
>>  + spin_unlock_irqrestore(&bus->lock, flags);
>>  +
>>  + time_left = wait_for_completion_interruptible_timeout(
>>  + &bus->cmd_complete, bus->adap.timeout * HZ * msg->len);
>
> Why do you multiply by * msg->len ?
>
>>  + if (time_left == 0)
>>  + return -ETIMEDOUT;
>>  +
>>  + spin_lock_irqsave(&bus->lock, flags);
>>  + if (bus->cmd_err)
>>  + ret = -EIO;
>>  + bus->msg = NULL;
>>  + spin_unlock_irqrestore(&bus->lock, flags);
>>  +
>>  + return ret;
>>  +}
>>  +
>>  +static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
>>  + struct i2c_msg *msgs, int num)
>>  +{
>>  + struct aspeed_i2c_bus *bus = adap->algo_data;
>>  + int ret;
>>  + int i;
>>  + unsigned long flags;
>>  + unsigned long time_left;
>>  +
>>  + /* If bus is busy, attempt recovery. We assume a single master
>>  + * environment.
>>  + */
>>  + if (aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG) &
>>  + ASPEED_I2CD_BUS_BUSY_STS) {
>>  + ret = aspeed_i2c_recover_bus(bus);
>>  + if (ret)
>>  + return ret;
>>  + }
>>  +
>>  + for (i = 0; i < num; i++) {
>>  + ret = aspeed_i2c_master_single_xfer(adap, &msgs[i]);
>>  + if (ret < 0)
>>  + break;
>>  + /* TODO: Support other forms of I2C protocol mangling. */
>>  + if (msgs[i].flags & I2C_M_STOP) {
>>  + spin_lock_irqsave(&bus->lock, flags);
>>  + aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD,
>>  + ASPEED_I2C_CMD_REG);
>>  + reinit_completion(&bus->cmd_complete);
>>  + spin_unlock_irqrestore(&bus->lock, flags);
>>  +
>>  + time_left = wait_for_completion_interruptible_timeout(
>>  + &bus->cmd_complete,
>>  + bus->adap.timeout * HZ);
>>  + if (time_left == 0)
>>  + return -ETIMEDOUT;
>>  + }
>>  + }
>>  +
>>  + spin_lock_irqsave(&bus->lock, flags);
>>  + aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD, ASPEED_I2C_CMD_REG);
>>  + reinit_completion(&bus->cmd_complete);
>>  + spin_unlock_irqrestore(&bus->lock, flags);
>>  +
>>  + time_left = wait_for_completion_interruptible_timeout(
>>  + &bus->cmd_complete, bus->adap.timeout * HZ);
>>  + if (time_left == 0)
>>  + return -ETIMEDOUT;
>>  +
>>  + /* If nothing went wrong, return number of messages transferred. */
>>  + if (ret < 0)
>>  + return ret;
>>  + else
>>  + return i;
>>  +}
>>  +
>>  +static u32 aspeed_i2c_functionality(struct i2c_adapter *adap)
>>  +{
>>  + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
>>  +}
>>  +
>>  +#if IS_ENABLED(CONFIG_I2C_SLAVE)
>>  +static int aspeed_i2c_reg_slave(struct i2c_client *client)
>>  +{
>>  + struct aspeed_i2c_bus *bus;
>>  + unsigned long flags;
>>  + u32 addr_reg_val;
>>  + u32 func_ctrl_reg_val;
>>  +
>>  + bus = client->adapter->algo_data;
>>  + spin_lock_irqsave(&bus->lock, flags);
>>  + if (bus->slave) {
>>  + spin_unlock_irqrestore(&bus->lock, flags);
>>  + return -EINVAL;
>>  + }
>>  +
>>  + /* Set slave addr. */
>>  + addr_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_DEV_ADDR_REG);
>>  + addr_reg_val &= ~ASPEED_I2CD_DEV_ADDR_MASK;
>>  + addr_reg_val |= client->addr & ASPEED_I2CD_DEV_ADDR_MASK;
>>  + aspeed_i2c_write(bus, addr_reg_val, ASPEED_I2C_DEV_ADDR_REG);
>>  +
>>  + /* Switch from master mode to slave mode. */
>>  + func_ctrl_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG);
>>  + func_ctrl_reg_val &= ~ASPEED_I2CD_MASTER_EN;
>>  + func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN;
>>  + aspeed_i2c_write(bus, func_ctrl_reg_val, ASPEED_I2C_FUN_CTRL_REG);
>>  +
>>  + bus->slave = client;
>>  + bus->slave_state = ASPEED_I2C_SLAVE_STOP;
>>  + spin_unlock_irqrestore(&bus->lock, flags);
>>  + return 0;
>>  +}
>>  +
>>  +static int aspeed_i2c_unreg_slave(struct i2c_client *client)
>>  +{
>>  + struct aspeed_i2c_bus *bus = client->adapter->algo_data;
>>  + unsigned long flags;
>>  + u32 func_ctrl_reg_val;
>>  +
>>  + spin_lock_irqsave(&bus->lock, flags);
>>  + if (!bus->slave) {
>>  + spin_unlock_irqrestore(&bus->lock, flags);
>>  + return -EINVAL;
>>  + }
>>  +
>>  + /* Switch from slave mode to master mode. */
>>  + func_ctrl_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG);
>>  + func_ctrl_reg_val &= ~ASPEED_I2CD_SLAVE_EN;
>>  + func_ctrl_reg_val |= ASPEED_I2CD_MASTER_EN;
>>  + aspeed_i2c_write(bus, func_ctrl_reg_val, ASPEED_I2C_FUN_CTRL_REG);
>>  +
>>  + bus->slave = NULL;
>>  + spin_unlock_irqrestore(&bus->lock, flags);
>>  + return 0;
>>  +}
>>  +#endif
>>  +
>>  +static const struct i2c_algorithm aspeed_i2c_algo = {
>>  + .master_xfer = aspeed_i2c_master_xfer,
>>  + .functionality = aspeed_i2c_functionality,
>>  +#if IS_ENABLED(CONFIG_I2C_SLAVE)
>>  + .reg_slave = aspeed_i2c_reg_slave,
>>  + .unreg_slave = aspeed_i2c_unreg_slave,
>>  +#endif
>>  +};
>>  +
>>  +static u32 aspeed_i2c_get_clk_reg_val(u32 divider_ratio)
>>  +{
>>  + unsigned int inc = 0, div;
>>  + u32 scl_low, scl_high, data;
>>  +
>>  + for (div = 0; divider_ratio >= 16; div++) {
>>  + inc |= (divider_ratio & 1);
>>  + divider_ratio >>= 1;
>>  + }
>>  + divider_ratio += inc;
>>  + scl_low = (divider_ratio >> 1) - 1;
>>  + scl_high = divider_ratio - scl_low - 2;
>>  + data = 0x77700300 | (scl_high << 16) | (scl_low << 12) | div;
>>  + return data;
>>  +}
>>  +
>>  +static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus,
>>  + struct platform_device *pdev)
>>  +{
>>  + struct clk *pclk;
>>  + u32 clk_freq;
>>  + u32 divider_ratio;
>>  + int ret;
>>  +
>>  + pclk = devm_clk_get(&pdev->dev, NULL);
>>  + if (IS_ERR(pclk)) {
>>  + dev_err(&pdev->dev, "clk_get failed\n");
>>  + return PTR_ERR(pclk);
>>  + }
>>  + ret = of_property_read_u32(pdev->dev.of_node,
>>  + "clock-frequency", &clk_freq);
>>  + if (ret < 0) {
>>  + dev_err(&pdev->dev,
>>  + "Could not read clock-frequency property\n");
>>  + clk_freq = 100000;
>>  + }
>>  + divider_ratio = clk_get_rate(pclk) / clk_freq;
>>  + /* We just need the clock rate, we don't actually use the clk object. */
>>  + devm_clk_put(&pdev->dev, pclk);
>>  +
>>  + /* Set AC Timing */
>>  + if (clk_freq / 1000 > 400) {
>>  + aspeed_i2c_write(bus, aspeed_i2c_read(bus,
>>  + ASPEED_I2C_FUN_CTRL_REG) |
>>  + ASPEED_I2CD_M_HIGH_SPEED_EN |
>>  + ASPEED_I2CD_M_SDA_DRIVE_1T_EN |
>>  + ASPEED_I2CD_SDA_DRIVE_1T_EN,
>>  + ASPEED_I2C_FUN_CTRL_REG);
>>  +
>>  + aspeed_i2c_write(bus, 0x3, ASPEED_I2C_AC_TIMING_REG2);
>>  + aspeed_i2c_write(bus, aspeed_i2c_get_clk_reg_val(divider_ratio),
>>  + ASPEED_I2C_AC_TIMING_REG1);
>>  + } else {
>>  + aspeed_i2c_write(bus, aspeed_i2c_get_clk_reg_val(divider_ratio),
>>  + ASPEED_I2C_AC_TIMING_REG1);
>>  + aspeed_i2c_write(bus, ASPEED_NO_TIMEOUT_CTRL,
>>  + ASPEED_I2C_AC_TIMING_REG2);
>>  + }
>>  +
>>  + return 0;
>>  +}
>>  +
>>  +static void noop(struct irq_data *data) { }
>>  +
>>  +static struct irq_chip aspeed_i2c_irqchip = {
>>  + .name = "ast-i2c",
>>  + .irq_unmask = noop,
>>  + .irq_mask = noop,
>>  +};
>>  +
>>  +static int aspeed_i2c_probe_bus(struct platform_device *pdev)
>>  +{
>>  + struct aspeed_i2c_bus *bus;
>>  + struct aspeed_i2c_controller *controller =
>>  + dev_get_drvdata(pdev->dev.parent);
>>  + struct resource *res;
>>  + int ret, irq;
>>  + u32 hwirq;
>>  +
>>  + bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
>>  + if (!bus)
>>  + return -ENOMEM;
>>  +
>>  + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>  + bus->base = devm_ioremap_resource(&pdev->dev, res);
>>  + if (IS_ERR(bus->base))
>>  + return PTR_ERR(bus->base);
>>  +
>>  + bus->irq = platform_get_irq(pdev, 0);
>>  + if (bus->irq < 0)
>>  + return -ENXIO;
>>  + ret = of_property_read_u32(pdev->dev.of_node, "interrupts", &hwirq);
>>  + if (ret < 0) {
>>  + dev_err(&pdev->dev, "no I2C 'interrupts' property\n");
>>  + return -ENXIO;
>>  + }
>>  + irq = irq_create_mapping(controller->irq_domain, hwirq);
>>  + irq_set_chip_data(irq, controller);
>>  + irq_set_chip_and_handler(irq, &aspeed_i2c_irqchip, handle_simple_irq);
>>  + ret = devm_request_irq(&pdev->dev, bus->irq, aspeed_i2c_bus_irq,
>>  + 0, dev_name(&pdev->dev), bus);
>>  + if (ret) {
>>  + dev_err(&pdev->dev, "failed to request interrupt\n");
>>  + return -ENXIO;
>>  + }
>>  +
>>  + /* Initialize the I2C adapter */
>>  + spin_lock_init(&bus->lock);
>>  + init_completion(&bus->cmd_complete);
>>  + bus->adap.owner = THIS_MODULE;
>>  + bus->adap.retries = 0;
>>  + bus->adap.timeout = 5;
>>  + bus->adap.algo = &aspeed_i2c_algo;
>>  + bus->adap.algo_data = bus;
>>  + bus->adap.dev.parent = &pdev->dev;
>>  + bus->adap.dev.of_node = pdev->dev.of_node;
>>  + snprintf(bus->adap.name, sizeof(bus->adap.name), "Aspeed i2c");
>>  +
>>  + bus->dev = &pdev->dev;
>>  +
>>  + /* reset device: disable master & slave functions */
>>  + aspeed_i2c_write(bus, 0, ASPEED_I2C_FUN_CTRL_REG);
>>  +
>>  + ret = aspeed_i2c_init_clk(bus, pdev);
>>  + if (ret < 0)
>>  + return ret;
>>  +
>>  + /* Enable Master Mode */
>>  + aspeed_i2c_write(bus, aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG) |
>>  + ASPEED_I2CD_MASTER_EN |
>>  + ASPEED_I2CD_MULTI_MASTER_DIS, ASPEED_I2C_FUN_CTRL_REG);
>>  +
>>  + /* Set interrupt generation of I2C controller */
>>  + aspeed_i2c_write(bus, ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |
>>  + ASPEED_I2CD_INTR_BUS_RECOVER_DONE |
>>  + ASPEED_I2CD_INTR_SCL_TIMEOUT |
>>  + ASPEED_I2CD_INTR_ABNORMAL |
>>  + ASPEED_I2CD_INTR_NORMAL_STOP |
>>  + ASPEED_I2CD_INTR_ARBIT_LOSS |
>>  + ASPEED_I2CD_INTR_RX_DONE |
>>  + ASPEED_I2CD_INTR_TX_NAK |
>>  + ASPEED_I2CD_INTR_TX_ACK,
>>  + ASPEED_I2C_INTR_CTRL_REG);
>>  +
>>  + ret = i2c_add_adapter(&bus->adap);
>>  + if (ret < 0)
>>  + return -ENXIO;
>>  +
>>  + platform_set_drvdata(pdev, bus);
>>  +
>>  + dev_info(bus->dev, "i2c bus %d registered, irq %d\n",
>>  + bus->adap.nr, bus->irq);
>>  +
>>  + return 0;
>>  +}
>>  +
>>  +static int aspeed_i2c_remove_bus(struct platform_device *pdev)
>>  +{
>>  + struct aspeed_i2c_bus *bus = platform_get_drvdata(pdev);
>>  +
>>  + i2c_del_adapter(&bus->adap);
>>  + return 0;
>>  +}
>>  +
>>  +static const struct of_device_id aspeed_i2c_bus_of_table[] = {
>>  + { .compatible = "aspeed,ast2400-i2c-bus", },
>>  + { .compatible = "aspeed,ast2500-i2c-bus", },
>>  + { },
>>  +};
>>  +MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table);
>>  +
>>  +static struct platform_driver aspeed_i2c_bus_driver = {
>>  + .probe = aspeed_i2c_probe_bus,
>>  + .remove = aspeed_i2c_remove_bus,
>>  + .driver = {
>>  + .name = "ast-i2c-bus",
>>  + .of_match_table = aspeed_i2c_bus_of_table,
>>  + },
>>  +};
>>  +
>>  +static void aspeed_i2c_controller_irq(struct irq_desc *desc)
>>  +{
>>  + struct aspeed_i2c_controller *c = irq_desc_get_handler_data(desc);
>>  + unsigned long p, status;
>>  + unsigned int bus_irq;
>>  +
>>  + status = readl(c->base);
>>  + for_each_set_bit(p, &status, ASPEED_I2C_NUM_BUS) {
>>  + bus_irq = irq_find_mapping(c->irq_domain, p);
>>  + generic_handle_irq(bus_irq);
>>  + }
>>  +}
>>  +
>>  +static int aspeed_i2c_probe_controller(struct platform_device *pdev)
>>  +{
>>  + struct aspeed_i2c_controller *controller;
>>  + struct device_node *np;
>>  + struct resource *res;
>>  +
>>  + controller = kzalloc(sizeof(*controller), GFP_KERNEL);
>
> use devm_kzalloc() may be ?
>
> C.
>
>>  + if (!controller)
>>  + return -ENOMEM;
>>  +
>>  + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>  + controller->base = devm_ioremap_resource(&pdev->dev, res);
>>  + if (IS_ERR(controller->base))
>>  + return PTR_ERR(controller->base);
>>  +
>>  + controller->irq = platform_get_irq(pdev, 0);
>>  + if (controller->irq < 0)
>>  + return -ENXIO;
>>  +
>>  + controller->irq_domain = irq_domain_add_linear(pdev->dev.of_node,
>>  + ASPEED_I2C_NUM_BUS, &irq_domain_simple_ops, NULL);
>>  + if (!controller->irq_domain)
>>  + return -ENXIO;
>>  + controller->irq_domain->name = "ast-i2c-domain";
>>  +
>>  + irq_set_chained_handler_and_data(controller->irq,
>>  + aspeed_i2c_controller_irq, controller);
>>  +
>>  + controller->dev = &pdev->dev;
>>  +
>>  + platform_set_drvdata(pdev, controller);
>>  +
>>  + dev_info(controller->dev, "i2c controller registered, irq %d\n",
>>  + controller->irq);
>>  +
>>  + for_each_child_of_node(pdev->dev.of_node, np) {
>>  + of_platform_device_create(np, NULL, &pdev->dev);
>>  + of_node_put(np);
>>  + }
>>  +
>>  + return 0;
>>  +}
>>  +
>>  +static int aspeed_i2c_remove_controller(struct platform_device *pdev)
>>  +{
>>  + struct aspeed_i2c_controller *controller = platform_get_drvdata(pdev);
>>  +
>>  + irq_domain_remove(controller->irq_domain);
>>  + return 0;
>>  +}
>>  +
>>  +static const struct of_device_id aspeed_i2c_controller_of_table[] = {
>>  + { .compatible = "aspeed,ast2400-i2c-controller", },
>>  + { .compatible = "aspeed,ast2500-i2c-controller", },
>>  + { },
>>  +};
>>  +MODULE_DEVICE_TABLE(of, aspeed_i2c_controller_of_table);
>>  +
>>  +static struct platform_driver aspeed_i2c_controller_driver = {
>>  + .probe = aspeed_i2c_probe_controller,
>>  + .remove = aspeed_i2c_remove_controller,
>>  + .driver = {
>>  + .name = "ast-i2c-controller",
>>  + .of_match_table = aspeed_i2c_controller_of_table,
>>  + },
>>  +};
>>  +
>>  +static int __init aspeed_i2c_driver_init(void)
>>  +{
>>  + int ret;
>>  +
>>  + ret = platform_driver_register(&aspeed_i2c_controller_driver);
>>  + if (ret < 0)
>>  + return ret;
>>  + return platform_driver_register(&aspeed_i2c_bus_driver);
>>  +}
>>  +module_init(aspeed_i2c_driver_init);
>>  +
>>  +static void __exit aspeed_i2c_driver_exit(void)
>>  +{
>>  + platform_driver_unregister(&aspeed_i2c_bus_driver);
>>  + platform_driver_unregister(&aspeed_i2c_controller_driver);
>>  +}
>>  +module_exit(aspeed_i2c_driver_exit);
>>  +
>>  +MODULE_AUTHOR("Brendan Higgins <brendanhiggins@google.com>");
>>  +MODULE_DESCRIPTION("Aspeed I2C Bus Driver");
>>  +MODULE_LICENSE("GPL");
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

Re: [PATCH v4 1/2] i2c: aspeed: added driver for Aspeed I2C

[Brendan Higgins]

> is it safe to start a new transaction when in a interrupt handler ?

Yep, i2c_transfer and most of the other functions in the i2c API that
wrap the implementations already lock for you.

> Why do you multiply by * msg->len ?

I thought it might make sense to make timeout proportional to message
length, so their would be a timeout per byte, like what the hardware
already does. I guess we should just leave that up to the user to
determine on their own?

> use devm_kzalloc() may be ?

Whoops, good catch. Will update in next version.

Re: [PATCH v4 1/2] i2c: aspeed: added driver for Aspeed I2C

[Brendan Higgins]

> is it safe to start a new transaction when in a interrupt handler ?

Yep, i2c_transfer and most of the other functions in the i2c API that
wrap the implementations already lock for you.

> Why do you multiply by * msg->len ?

I thought it might make sense to make timeout proportional to message
length, so their would be a timeout per byte, like what the hardware
already does. I guess we should just leave that up to the user to
determine on their own?

> use devm_kzalloc() may be ?

Whoops, good catch. Will update in next version.

Re: [PATCH v4 1/2] i2c: aspeed: added driver for Aspeed I2C

[Brendan Higgins]

> I would like to add my five cents here. Do not limit the bus_clk with 400kHz (FM) while HighSpeed is above
> 1MHz (above FM+ devices). I've successfully tested FM+ (1Mhz) in a quite big i2c network (a number of
> pca9600, pca9675, pca9848) with at least eight AST2150 SoCs on the common bus.

Interesting point, on one hand I would argue that we should force
people to use either FM or FM+ in a conformant manner. But on the
other hand, I suppose a device may not support FM+'s electrical
characteristics, but could run at a higher clock rate, and it is
better to allow that than forcing FM+. Maybe I should remove any kind
of restriction, and just allow the clock to be set to any conformant
frequency and expose FM+ as a separate option in device tree.
Thoughts?

> BTW. Just a lame question. If the device isn't designed to work on the higher speed (like standard of FM)
> while the bus selected as FM+, would those kind of devices just unoperate or may have undefined behavior
> and disturb the SDA/SCL? Just wondering to dynamically slowdown down to 100Khz (if needed) for the
> specific slave, but keep high rate (FM+) at the normal operation.

I have never tried this myself, but I suspect there may be other
issues with running an FM device on an FM+ bus: FM+ uses a higher
current to make the rise times on the line faster. A bigger problem:
if a master wanted to select a high speed capable slave, it could
write the address at a high speed which might look like a different
address to a low speed slave that is incapable of sampling the address
properly. So I do not think that supporting dynamically slowing down
an I2C bus makes much sense. An interesting idea, though.

Re: [PATCH v4 1/2] i2c: aspeed: added driver for Aspeed I2C

[Vladimir Zapolskiy]

Hello Brendan,

please find some review notes below.

On 11/05/2016 03:58 AM, Brendan Higgins wrote:
> Added initial master and slave support for Aspeed I2C controller.
> Supports fourteen busses present in ast24xx and ast25xx BMC SoCs by
> Aspeed.
>
> Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
> ---
> Changes for v2:
>   - Added single module_init (multiple was breaking some builds).
> Changes for v3:
>   - Removed "bus" device tree param; now extracted from bus address offset
> Changes for v4:
>   - I2C adapter number is now generated dynamically unless specified in alias.
> ---
>  drivers/i2c/busses/Kconfig      |  10 +
>  drivers/i2c/busses/Makefile     |   1 +
>  drivers/i2c/busses/i2c-aspeed.c | 807 ++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 818 insertions(+)
>  create mode 100644 drivers/i2c/busses/i2c-aspeed.c
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index d252276..b6caa5d 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -1009,6 +1009,16 @@ config I2C_RCAR
>  	  This driver can also be built as a module.  If so, the module
>  	  will be called i2c-rcar.
>
> +config I2C_ASPEED
> +	tristate "Aspeed AST2xxx SoC I2C Controller"
> +	depends on ARCH_ASPEED
> +	help
> +	  If you say yes to this option, support will be included for the
> +	  Aspeed AST2xxx SoC I2C controller.
> +
> +	  This driver can also be built as a module.  If so, the module
> +	  will be called i2c-aspeed.
> +

Please try to keep the list ordered, it would be better, if you
add I2C_ASPEED before I2C_AT91.

>  comment "External I2C/SMBus adapter drivers"
>
>  config I2C_DIOLAN_U2C
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index 29764cc..826e780 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -99,6 +99,7 @@ obj-$(CONFIG_I2C_XILINX)	+= i2c-xiic.o
>  obj-$(CONFIG_I2C_XLR)		+= i2c-xlr.o
>  obj-$(CONFIG_I2C_XLP9XX)	+= i2c-xlp9xx.o
>  obj-$(CONFIG_I2C_RCAR)		+= i2c-rcar.o
> +obj-$(CONFIG_I2C_ASPEED)	+= i2c-aspeed.o
>

Same comment as above, put it in front of i2c-at91.o

>  # External I2C/SMBus adapter drivers
>  obj-$(CONFIG_I2C_DIOLAN_U2C)	+= i2c-diolan-u2c.o
> diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
> new file mode 100644
> index 0000000..88e078a
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-aspeed.c
> @@ -0,0 +1,807 @@
> +/*
> + *  I2C adapter for the ASPEED I2C bus.
> + *
> + *  Copyright (C) 2012-2020  ASPEED Technology Inc.

I don't think that the copyright dated by 2020 in advance is legal here.

Please change it to the expected ...-2016 value.

> + *  Copyright 2016 IBM Corporation
> + *  Copyright 2016 Google, Inc.
> + *
> + *  This program is free software; you can redistribute it and/or modify
> + *  it under the terms of the GNU General Public License version 2 as
> + *  published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/errno.h>
> +#include <linux/interrupt.h>
> +#include <linux/completion.h>
> +#include <linux/slab.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/err.h>
> +#include <linux/clk.h>

Please sort the headers alphabetically.

> +
> +/* I2C Register */
> +#define ASPEED_I2C_FUN_CTRL_REG				0x00
> +#define ASPEED_I2C_AC_TIMING_REG1			0x04
> +#define ASPEED_I2C_AC_TIMING_REG2			0x08
> +#define ASPEED_I2C_INTR_CTRL_REG			0x0c
> +#define ASPEED_I2C_INTR_STS_REG				0x10
> +#define ASPEED_I2C_CMD_REG				0x14
> +#define ASPEED_I2C_DEV_ADDR_REG				0x18
> +#define ASPEED_I2C_BYTE_BUF_REG				0x20
> +#define ASPEED_I2C_OFFSET_START				0x40

Unused macro, please remove.

> +#define ASPEED_I2C_OFFSET_INCREMENT			0x40

Unused macro, please remove.

> +
> +#define ASPEED_I2C_NUM_BUS 14
> +
> +/* Global Register Definition */
> +/* 0x00 : I2C Interrupt Status Register  */
> +/* 0x08 : I2C Interrupt Target Assignment  */
> +
> +/* Device Register Definition */
> +/* 0x00 : I2CD Function Control Register  */
> +#define ASPEED_I2CD_MULTI_MASTER_DIS			BIT(15)

Unused macro, please remove.

> +#define ASPEED_I2CD_SDA_DRIVE_1T_EN			BIT(8)

Unused macro, please remove.

> +#define ASPEED_I2CD_M_SDA_DRIVE_1T_EN			BIT(7)
> +#define ASPEED_I2CD_M_HIGH_SPEED_EN			BIT(6)
> +#define ASPEED_I2CD_SLAVE_EN				BIT(1)

Unused macro, please remove. You add slave support, may be you
need this control, but it is unused.

> +#define ASPEED_I2CD_MASTER_EN				BIT(0)
> +
> +/* 0x08 : I2CD Clock and AC Timing Control Register #2 */
> +#define ASPEED_NO_TIMEOUT_CTRL				0
> +
> +
> +/* 0x0c : I2CD Interrupt Control Register &
> + * 0x10 : I2CD Interrupt Status Register
> + *
> + * These share bit definitions, so use the same values for the enable &
> + * status bits.
> + */
> +#define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT			BIT(14)
> +#define ASPEED_I2CD_INTR_BUS_RECOVER_DONE		BIT(13)
> +#define ASPEED_I2CD_INTR_SLAVE_MATCH			BIT(7)
> +#define ASPEED_I2CD_INTR_SCL_TIMEOUT			BIT(6)
> +#define ASPEED_I2CD_INTR_ABNORMAL			BIT(5)
> +#define ASPEED_I2CD_INTR_NORMAL_STOP			BIT(4)
> +#define ASPEED_I2CD_INTR_ARBIT_LOSS			BIT(3)
> +#define ASPEED_I2CD_INTR_RX_DONE			BIT(2)
> +#define ASPEED_I2CD_INTR_TX_NAK				BIT(1)
> +#define ASPEED_I2CD_INTR_TX_ACK				BIT(0)
> +
> +/* 0x14 : I2CD Command/Status Register   */
> +#define ASPEED_I2CD_SCL_LINE_STS			BIT(18)
> +#define ASPEED_I2CD_SDA_LINE_STS			BIT(17)
> +#define ASPEED_I2CD_BUS_BUSY_STS			BIT(16)
> +#define ASPEED_I2CD_BUS_RECOVER_CMD			BIT(11)
> +
> +/* Command Bit */
> +#define ASPEED_I2CD_M_STOP_CMD				BIT(5)
> +#define ASPEED_I2CD_M_S_RX_CMD_LAST			BIT(4)
> +#define ASPEED_I2CD_M_RX_CMD				BIT(3)
> +#define ASPEED_I2CD_S_TX_CMD				BIT(2)
> +#define ASPEED_I2CD_M_TX_CMD				BIT(1)
> +#define ASPEED_I2CD_M_START_CMD				BIT(0)
> +
> +/* 0x18 : I2CD Slave Device Address Register   */
> +#define ASPEED_I2CD_DEV_ADDR_MASK			GENMASK(6, 0)
> +
> +enum aspeed_i2c_slave_state {
> +	ASPEED_I2C_SLAVE_START,
> +	ASPEED_I2C_SLAVE_READ_REQUESTED,
> +	ASPEED_I2C_SLAVE_READ_PROCESSED,
> +	ASPEED_I2C_SLAVE_WRITE_REQUESTED,
> +	ASPEED_I2C_SLAVE_WRITE_RECEIVED,
> +	ASPEED_I2C_SLAVE_STOP,
> +};
> +
> +struct aspeed_i2c_bus {
> +	struct i2c_adapter		adap;
> +	struct device			*dev;
> +	void __iomem			*base;
> +	spinlock_t			lock;
> +	struct completion		cmd_complete;
> +	int				irq;
> +	/* Transaction state. */
> +	struct i2c_msg			*msg;
> +	int				msg_pos;
> +	u32				cmd_err;
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +	struct i2c_client		*slave;
> +	enum aspeed_i2c_slave_state	slave_state;
> +#endif
> +};
> +
> +struct aspeed_i2c_controller {
> +	struct device		*dev;
> +	void __iomem		*base;
> +	int			irq;
> +	struct irq_domain	*irq_domain;
> +};
> +
> +static inline void aspeed_i2c_write(struct aspeed_i2c_bus *bus, u32 val,
> +				    u32 reg)
> +{
> +	writel(val, bus->base + reg);
> +}
> +
> +static inline u32 aspeed_i2c_read(struct aspeed_i2c_bus *bus, u32 reg)
> +{
> +	return readl(bus->base + reg);
> +}
> +
> +static u8 aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus)

The function may return errors as negative numbers, please
change its return type to 'int'.

> +{
> +	u32 command;
> +	unsigned long time_left;
> +	unsigned long flags;
> +	int ret = 0;

Please whenever possible use "reverse christmas tree" order while
declaring local variables, this applies to all functions, here it
should be

	unsigned long time_left, flags;
	int ret = 0;
	u32 command;

> +
> +	spin_lock_irqsave(&bus->lock, flags);
> +	command = aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG);
> +	/* Bus is idle: no recovery needed. */
> +	if ((command & ASPEED_I2CD_SDA_LINE_STS) &&
> +	    (command & ASPEED_I2CD_SCL_LINE_STS))
> +		goto out;
> +
> +	dev_dbg(bus->dev, "bus hung (state %x), attempting recovery\n",
> +		command);
> +
> +	/* Bus held: put bus in stop state. */
> +	if ((command & ASPEED_I2CD_SDA_LINE_STS) &&
> +	    !(command & ASPEED_I2CD_SCL_LINE_STS)) {
> +		aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD,
> +				 ASPEED_I2C_CMD_REG);
> +		reinit_completion(&bus->cmd_complete);
> +		spin_unlock_irqrestore(&bus->lock, flags);
> +
> +		time_left = wait_for_completion_interruptible_timeout(
> +				&bus->cmd_complete, bus->adap.timeout * HZ);
> +
> +		spin_lock_irqsave(&bus->lock, flags);
> +		if (time_left == 0)
> +			ret = -ETIMEDOUT;
> +		else if (bus->cmd_err)
> +			ret = -EIO;

Since you use wait_for_completion_interruptible_timeout(), please
handle possible -ERESTARTSYS error if the execution is interrupted.

You have 5 quite similar wait_for_completion_interruptible_timeout()
functions in the driver, please add it to all of them, or you may
think how to wrap it properly into a new function.

> +	/* Bus error. */
> +	} else if (!(command & ASPEED_I2CD_SDA_LINE_STS)) {

You don't need to introduce "else if" here, at this point
!(command & ASPEED_I2CD_SDA_LINE_STS) expression is always true.

Please drop dev_dbg("bus hang") statement from above (or put it to
an if-branch from two ones described below) and for simplicity
rearrange the code:

	if (command & ASPEED_I2CD_SDA_LINE_STS) {
		/* Bus is idle: no recovery needed. */
		if (command & ASPEED_I2CD_SCL_LINE_STS)
			goto out;

		/* Bus held: put bus in stop state. */
		.....
	} else {
		/* Bus error. */
		.....
	}

> +		aspeed_i2c_write(bus, ASPEED_I2CD_BUS_RECOVER_CMD,
> +				 ASPEED_I2C_CMD_REG);
> +		reinit_completion(&bus->cmd_complete);
> +		spin_unlock_irqrestore(&bus->lock, flags);
> +
> +		time_left = wait_for_completion_interruptible_timeout(
> +				&bus->cmd_complete, bus->adap.timeout * HZ);
> +
> +		spin_lock_irqsave(&bus->lock, flags);
> +		if (time_left == 0)
> +			ret = -ETIMEDOUT;
> +		else if (bus->cmd_err)
> +			ret = -EIO;
> +		/* Recovery failed. */
> +		else if (!(aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG) &
> +			   ASPEED_I2CD_SDA_LINE_STS))
> +			ret = -EIO;
> +	}
> +
> +out:
> +	spin_unlock_irqrestore(&bus->lock, flags);

Please insert an empty line here to improve readability.

> +	return ret;
> +}
> +
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
> +{
> +	bool irq_handled = true;
> +	u32 command;
> +	u32 irq_status;
> +	u32 status_ack = 0;
> +	u8 value;
> +	struct i2c_client *slave = bus->slave;

See a comment above about order of declared local variables.

> +
> +	spin_lock(&bus->lock);
> +	if (!slave) {
> +		irq_handled = false;
> +		goto out;
> +	}

Add an empty line here.

> +	command = aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG);
> +	irq_status = aspeed_i2c_read(bus, ASPEED_I2C_INTR_STS_REG);
> +
> +	/* Slave was requested, restart state machine. */
> +	if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) {
> +		status_ack |= ASPEED_I2CD_INTR_SLAVE_MATCH;
> +		bus->slave_state = ASPEED_I2C_SLAVE_START;
> +	}

Add an empty line here.

> +	/* Slave is not currently active, irq was for someone else. */
> +	if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
> +		irq_handled = false;
> +		goto out;
> +	}
> +
> +	dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n",
> +		irq_status, command);
> +
> +	/* Slave was sent something. */
> +	if (irq_status & ASPEED_I2CD_INTR_RX_DONE) {
> +		value = aspeed_i2c_read(bus, ASPEED_I2C_BYTE_BUF_REG) >> 8;
> +		/* Handle address frame. */
> +		if (bus->slave_state == ASPEED_I2C_SLAVE_START) {
> +			if (value & 0x1)
> +				bus->slave_state =
> +						ASPEED_I2C_SLAVE_READ_REQUESTED;
> +			else
> +				bus->slave_state =
> +						ASPEED_I2C_SLAVE_WRITE_REQUESTED;
> +		}
> +		status_ack |= ASPEED_I2CD_INTR_RX_DONE;
> +	}
> +
> +	/* Slave was asked to stop. */
> +	if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
> +		status_ack |= ASPEED_I2CD_INTR_NORMAL_STOP;
> +		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
> +	}

Add an empty line here.

> +	if (irq_status & ASPEED_I2CD_INTR_TX_NAK) {
> +		status_ack |= ASPEED_I2CD_INTR_TX_NAK;
> +		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
> +	}
> +
> +	if (bus->slave_state == ASPEED_I2C_SLAVE_READ_REQUESTED) {
> +		if (irq_status & ASPEED_I2CD_INTR_TX_ACK)
> +			dev_err(bus->dev, "Unexpected ACK on read request.\n");
> +		bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED;
> +
> +		i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
> +		aspeed_i2c_write(bus, value, ASPEED_I2C_BYTE_BUF_REG);
> +		aspeed_i2c_write(bus, ASPEED_I2CD_S_TX_CMD, ASPEED_I2C_CMD_REG);
> +	} else if (bus->slave_state == ASPEED_I2C_SLAVE_READ_PROCESSED) {
> +		status_ack |= ASPEED_I2CD_INTR_TX_ACK;
> +		if (!(irq_status & ASPEED_I2CD_INTR_TX_ACK))
> +			dev_err(bus->dev,
> +				"Expected ACK after processed read.\n");
> +		i2c_slave_event(slave, I2C_SLAVE_READ_PROCESSED, &value);
> +		aspeed_i2c_write(bus, value, ASPEED_I2C_BYTE_BUF_REG);
> +		aspeed_i2c_write(bus, ASPEED_I2CD_S_TX_CMD, ASPEED_I2C_CMD_REG);
> +	} else if (bus->slave_state == ASPEED_I2C_SLAVE_WRITE_REQUESTED) {
> +		bus->slave_state = ASPEED_I2C_SLAVE_WRITE_RECEIVED;
> +		i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
> +	} else if (bus->slave_state == ASPEED_I2C_SLAVE_WRITE_RECEIVED) {
> +		i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value);
> +	} else if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
> +		i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
> +	}

Please change this if-else-if-else-if-... construction of state machine
changes into switch-case.

> +
> +	if (status_ack != irq_status)
> +		dev_err(bus->dev,
> +			"irq handled != irq. expected %x, but was %x\n",
> +			irq_status, status_ack);
> +	aspeed_i2c_write(bus, status_ack, ASPEED_I2C_INTR_STS_REG);
> +
> +out:
> +	spin_unlock(&bus->lock);
> +	return irq_handled;
> +}
> +#endif
> +
> +static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
> +{
> +	const u32 errs = ASPEED_I2CD_INTR_ARBIT_LOSS |
> +		ASPEED_I2CD_INTR_ABNORMAL |
> +		ASPEED_I2CD_INTR_SCL_TIMEOUT |
> +		ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |
> +		ASPEED_I2CD_INTR_TX_NAK;

You don't need this local variable, it is used only once, please
declare a macro and put it somewhere close to ASPEED_I2CD_INTR_*
macro in the beginning of the file.

> +	u32 irq_status;
> +
> +	spin_lock(&bus->lock);
> +	irq_status = aspeed_i2c_read(bus, ASPEED_I2C_INTR_STS_REG);
> +	bus->cmd_err = irq_status & errs;
> +
> +	dev_dbg(bus->dev, "master irq status 0x%08x\n", irq_status);
> +
> +	/* No message to transfer. */
> +	if (bus->cmd_err ||
> +	    (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) ||
> +	    (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE)) {
> +		complete(&bus->cmd_complete);
> +		goto out;
> +	} else if (!bus->msg || bus->msg_pos >= bus->msg->len)
> +		goto out;
> +
> +	if ((bus->msg->flags & I2C_M_RD) &&
> +	    (irq_status & ASPEED_I2CD_INTR_RX_DONE)) {
> +		bus->msg->buf[bus->msg_pos++] = aspeed_i2c_read(
> +				bus, ASPEED_I2C_BYTE_BUF_REG) >> 8;
> +		if (bus->msg_pos + 1 < bus->msg->len)
> +			aspeed_i2c_write(bus, ASPEED_I2CD_M_RX_CMD,
> +					 ASPEED_I2C_CMD_REG);
> +		else if (bus->msg_pos < bus->msg->len)
> +			aspeed_i2c_write(bus, ASPEED_I2CD_M_RX_CMD |
> +				      ASPEED_I2CD_M_S_RX_CMD_LAST,
> +				      ASPEED_I2C_CMD_REG);
> +	} else if (!(bus->msg->flags & I2C_M_RD) &&
> +		   (irq_status & ASPEED_I2CD_INTR_TX_ACK)) {
> +		aspeed_i2c_write(bus, bus->msg->buf[bus->msg_pos++],
> +			      ASPEED_I2C_BYTE_BUF_REG);
> +		aspeed_i2c_write(bus, ASPEED_I2CD_M_TX_CMD, ASPEED_I2C_CMD_REG);
> +	}
> +
> +	/* Transmission complete: notify caller. */
> +	if (bus->msg_pos >= bus->msg->len)
> +		complete(&bus->cmd_complete);
> +out:
> +	aspeed_i2c_write(bus, irq_status, ASPEED_I2C_INTR_STS_REG);
> +	spin_unlock(&bus->lock);

Please insert an empty line here to improve readability.

> +	return true;
> +}
> +
> +static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
> +{
> +	struct aspeed_i2c_bus *bus = dev_id;
> +
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +	if (aspeed_i2c_slave_irq(bus)) {
> +		dev_dbg(bus->dev, "irq handled by slave.\n");
> +		return IRQ_HANDLED;
> +	}
> +#endif

Please insert an empty line here to improve readability.

> +	if (aspeed_i2c_master_irq(bus)) {
> +		dev_dbg(bus->dev, "irq handled by master.\n");
> +		return IRQ_HANDLED;
> +	}

Please insert an empty line here to improve readability.

> +	dev_err(bus->dev, "irq not handled properly!\n");
> +	return IRQ_HANDLED;

If interrupt is not handled, return IRQ_NONE.

> +}
> +
> +static int aspeed_i2c_master_single_xfer(struct i2c_adapter *adap,
> +				      struct i2c_msg *msg)
> +{
> +	struct aspeed_i2c_bus *bus = adap->algo_data;
> +	unsigned long flags;
> +	u8 slave_addr;
> +	u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD;
> +	int ret = msg->len;
> +	unsigned long time_left;
> +
> +	spin_lock_irqsave(&bus->lock, flags);
> +	bus->msg = msg;
> +	bus->msg_pos = 0;
> +	slave_addr = msg->addr << 1;

Please insert an empty line here to improve readability.

> +	if (msg->flags & I2C_M_RD) {
> +		slave_addr |= 1;
> +		command |= ASPEED_I2CD_M_RX_CMD;
> +		if (msg->len == 1)
> +			command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
> +	}

Please insert an empty line here to improve readability.

> +	aspeed_i2c_write(bus, slave_addr, ASPEED_I2C_BYTE_BUF_REG);
> +	aspeed_i2c_write(bus, command, ASPEED_I2C_CMD_REG);
> +	reinit_completion(&bus->cmd_complete);
> +	spin_unlock_irqrestore(&bus->lock, flags);
> +
> +	time_left = wait_for_completion_interruptible_timeout(
> +			&bus->cmd_complete, bus->adap.timeout * HZ * msg->len);
> +	if (time_left == 0)
> +		return -ETIMEDOUT;
> +
> +	spin_lock_irqsave(&bus->lock, flags);
> +	if (bus->cmd_err)
> +		ret = -EIO;

Please insert an empty line here to improve readability.

> +	bus->msg = NULL;
> +	spin_unlock_irqrestore(&bus->lock, flags);
> +
> +	return ret;
> +}
> +
> +static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
> +				  struct i2c_msg *msgs, int num)
> +{
> +	struct aspeed_i2c_bus *bus = adap->algo_data;
> +	int ret;
> +	int i;
> +	unsigned long flags;
> +	unsigned long time_left;
> +
> +	/* If bus is busy, attempt recovery. We assume a single master
> +	 * environment.
> +	 */
> +	if (aspeed_i2c_read(bus, ASPEED_I2C_CMD_REG) &
> +	    ASPEED_I2CD_BUS_BUSY_STS) {
> +		ret = aspeed_i2c_recover_bus(bus);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	for (i = 0; i < num; i++) {
> +		ret = aspeed_i2c_master_single_xfer(adap, &msgs[i]);
> +		if (ret < 0)
> +			break;
> +		/* TODO: Support other forms of I2C protocol mangling. */
> +		if (msgs[i].flags & I2C_M_STOP) {
> +			spin_lock_irqsave(&bus->lock, flags);
> +			aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD,
> +				      ASPEED_I2C_CMD_REG);
> +			reinit_completion(&bus->cmd_complete);
> +			spin_unlock_irqrestore(&bus->lock, flags);
> +
> +			time_left = wait_for_completion_interruptible_timeout(
> +					&bus->cmd_complete,
> +					bus->adap.timeout * HZ);
> +			if (time_left == 0)
> +				return -ETIMEDOUT;
> +		}
> +	}
> +
> +	spin_lock_irqsave(&bus->lock, flags);
> +	aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD, ASPEED_I2C_CMD_REG);
> +	reinit_completion(&bus->cmd_complete);
> +	spin_unlock_irqrestore(&bus->lock, flags);
> +
> +	time_left = wait_for_completion_interruptible_timeout(
> +			&bus->cmd_complete, bus->adap.timeout * HZ);
> +	if (time_left == 0)
> +		return -ETIMEDOUT;
> +
> +	/* If nothing went wrong, return number of messages transferred. */
> +	if (ret < 0)
> +		return ret;
> +	else
> +		return i;
> +}
> +
> +static u32 aspeed_i2c_functionality(struct i2c_adapter *adap)
> +{
> +	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
> +}
> +
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +static int aspeed_i2c_reg_slave(struct i2c_client *client)
> +{
> +	struct aspeed_i2c_bus *bus;
> +	unsigned long flags;
> +	u32 addr_reg_val;
> +	u32 func_ctrl_reg_val;
> +
> +	bus = client->adapter->algo_data;
> +	spin_lock_irqsave(&bus->lock, flags);
> +	if (bus->slave) {
> +		spin_unlock_irqrestore(&bus->lock, flags);
> +		return -EINVAL;
> +	}
> +
> +	/* Set slave addr. */
> +	addr_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_DEV_ADDR_REG);
> +	addr_reg_val &= ~ASPEED_I2CD_DEV_ADDR_MASK;
> +	addr_reg_val |= client->addr & ASPEED_I2CD_DEV_ADDR_MASK;
> +	aspeed_i2c_write(bus, addr_reg_val, ASPEED_I2C_DEV_ADDR_REG);
> +
> +	/* Switch from master mode to slave mode. */
> +	func_ctrl_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG);
> +	func_ctrl_reg_val &= ~ASPEED_I2CD_MASTER_EN;
> +	func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN;
> +	aspeed_i2c_write(bus, func_ctrl_reg_val, ASPEED_I2C_FUN_CTRL_REG);
> +
> +	bus->slave = client;
> +	bus->slave_state = ASPEED_I2C_SLAVE_STOP;
> +	spin_unlock_irqrestore(&bus->lock, flags);

Please insert an empty line here to improve readability.

> +	return 0;
> +}
> +
> +static int aspeed_i2c_unreg_slave(struct i2c_client *client)
> +{
> +	struct aspeed_i2c_bus *bus = client->adapter->algo_data;
> +	unsigned long flags;
> +	u32 func_ctrl_reg_val;
> +
> +	spin_lock_irqsave(&bus->lock, flags);
> +	if (!bus->slave) {
> +		spin_unlock_irqrestore(&bus->lock, flags);
> +		return -EINVAL;
> +	}
> +
> +	/* Switch from slave mode to master mode. */
> +	func_ctrl_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG);
> +	func_ctrl_reg_val &= ~ASPEED_I2CD_SLAVE_EN;
> +	func_ctrl_reg_val |= ASPEED_I2CD_MASTER_EN;
> +	aspeed_i2c_write(bus, func_ctrl_reg_val, ASPEED_I2C_FUN_CTRL_REG);
> +
> +	bus->slave = NULL;
> +	spin_unlock_irqrestore(&bus->lock, flags);

Please insert an empty line here to improve readability.

> +	return 0;
> +}
> +#endif
> +
> +static const struct i2c_algorithm aspeed_i2c_algo = {
> +	.master_xfer	= aspeed_i2c_master_xfer,
> +	.functionality	= aspeed_i2c_functionality,
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +	.reg_slave	= aspeed_i2c_reg_slave,
> +	.unreg_slave	= aspeed_i2c_unreg_slave,
> +#endif
> +};
> +
> +static u32 aspeed_i2c_get_clk_reg_val(u32 divider_ratio)
> +{
> +	unsigned int inc = 0, div;
> +	u32 scl_low, scl_high, data;
> +
> +	for (div = 0; divider_ratio >= 16; div++) {
> +		inc |= (divider_ratio & 1);
> +		divider_ratio >>= 1;
> +	}

Please insert an empty line here to improve readability.

> +	divider_ratio += inc;
> +	scl_low = (divider_ratio >> 1) - 1;
> +	scl_high = divider_ratio - scl_low - 2;
> +	data = 0x77700300 | (scl_high << 16) | (scl_low << 12) | div;
> +	return data;
> +}
> +
> +static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus,
> +			    struct platform_device *pdev)
> +{
> +	struct clk *pclk;
> +	u32 clk_freq;
> +	u32 divider_ratio;
> +	int ret;
> +
> +	pclk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(pclk)) {
> +		dev_err(&pdev->dev, "clk_get failed\n");
> +		return PTR_ERR(pclk);
> +	}
> +	ret = of_property_read_u32(pdev->dev.of_node,
> +			"clock-frequency", &clk_freq);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev,
> +				"Could not read clock-frequency property\n");
> +		clk_freq = 100000;
> +	}
> +	divider_ratio = clk_get_rate(pclk) / clk_freq;
> +	/* We just need the clock rate, we don't actually use the clk object. */
> +	devm_clk_put(&pdev->dev, pclk);

Does the controller have a clock supply? If yes, shall the clock be
enabled before issuing command to the controller?

> +
> +	/* Set AC Timing */
> +	if (clk_freq / 1000 > 400) {
> +		aspeed_i2c_write(bus, aspeed_i2c_read(bus,
> +						      ASPEED_I2C_FUN_CTRL_REG) |
> +				ASPEED_I2CD_M_HIGH_SPEED_EN |
> +				ASPEED_I2CD_M_SDA_DRIVE_1T_EN |
> +				ASPEED_I2CD_SDA_DRIVE_1T_EN,
> +				ASPEED_I2C_FUN_CTRL_REG);
> +
> +		aspeed_i2c_write(bus, 0x3, ASPEED_I2C_AC_TIMING_REG2);
> +		aspeed_i2c_write(bus, aspeed_i2c_get_clk_reg_val(divider_ratio),
> +			      ASPEED_I2C_AC_TIMING_REG1);
> +	} else {
> +		aspeed_i2c_write(bus, aspeed_i2c_get_clk_reg_val(divider_ratio),
> +			      ASPEED_I2C_AC_TIMING_REG1);
> +		aspeed_i2c_write(bus, ASPEED_NO_TIMEOUT_CTRL,
> +				 ASPEED_I2C_AC_TIMING_REG2);
> +	}
> +
> +	return 0;
> +}
> +
> +static void noop(struct irq_data *data) { }
> +
> +static struct irq_chip aspeed_i2c_irqchip = {
> +	.name		= "ast-i2c",
> +	.irq_unmask	= noop,
> +	.irq_mask	= noop,

Thomas or Marc should review the irqchip code for correctness,
inform them.

> +};
> +
> +static int aspeed_i2c_probe_bus(struct platform_device *pdev)
> +{
> +	struct aspeed_i2c_bus *bus;
> +	struct aspeed_i2c_controller *controller =
> +			dev_get_drvdata(pdev->dev.parent);

How do you ensure that "controller" device _driver_ is initialized
at this point? This is a critical race condition.

> +	struct resource *res;
> +	int ret, irq;
> +	u32 hwirq;
> +
> +	bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
> +	if (!bus)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	bus->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(bus->base))
> +		return PTR_ERR(bus->base);
> +
> +	bus->irq = platform_get_irq(pdev, 0);
> +	if (bus->irq < 0)
> +		return -ENXIO;

Remove check for error here, on error it will be returned by the
following devm_request_irq().

> +	ret = of_property_read_u32(pdev->dev.of_node, "interrupts", &hwirq);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "no I2C 'interrupts' property\n");
> +		return -ENXIO;

return -EINVAL;

> +	}
> +	irq = irq_create_mapping(controller->irq_domain, hwirq);
> +	irq_set_chip_data(irq, controller);
> +	irq_set_chip_and_handler(irq, &aspeed_i2c_irqchip, handle_simple_irq);
> +	ret = devm_request_irq(&pdev->dev, bus->irq, aspeed_i2c_bus_irq,
> +			0, dev_name(&pdev->dev), bus);
> +	if (ret) {
> +		dev_err(&pdev->dev, "failed to request interrupt\n");
> +		return -ENXIO;

return ret;

In general I'm very surprised to see irqchip declaration and
initialization as a part of an I2C bus driver.

What is it used for? If you keep it, most probably IRQCHIP maintainers
(Thomas, Marc) shall review and ack the code.

> +	}
> +
> +	/* Initialize the I2C adapter */
> +	spin_lock_init(&bus->lock);
> +	init_completion(&bus->cmd_complete);
> +	bus->adap.owner = THIS_MODULE;
> +	bus->adap.retries = 0;
> +	bus->adap.timeout = 5;

I don't think that this is a correct value, because here timeout unit
is in jiffies. Please update it here and everywhere in the driver,
where you use the value.

> +	bus->adap.algo = &aspeed_i2c_algo;
> +	bus->adap.algo_data = bus;
> +	bus->adap.dev.parent = &pdev->dev;
> +	bus->adap.dev.of_node = pdev->dev.of_node;
> +	snprintf(bus->adap.name, sizeof(bus->adap.name), "Aspeed i2c");
> +
> +	bus->dev = &pdev->dev;
> +
> +	/* reset device: disable master & slave functions */
> +	aspeed_i2c_write(bus, 0, ASPEED_I2C_FUN_CTRL_REG);
> +
> +	ret = aspeed_i2c_init_clk(bus, pdev);
> +	if (ret < 0)
> +		return ret;

I'm not sure here, probably you start leaking resources allocated by
irq_create_mapping().

> +
> +	/* Enable Master Mode */
> +	aspeed_i2c_write(bus, aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG) |
> +		      ASPEED_I2CD_MASTER_EN |
> +		      ASPEED_I2CD_MULTI_MASTER_DIS, ASPEED_I2C_FUN_CTRL_REG);
> +
> +	/* Set interrupt generation of I2C controller */
> +	aspeed_i2c_write(bus, ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |
> +			ASPEED_I2CD_INTR_BUS_RECOVER_DONE |
> +			ASPEED_I2CD_INTR_SCL_TIMEOUT |
> +			ASPEED_I2CD_INTR_ABNORMAL |
> +			ASPEED_I2CD_INTR_NORMAL_STOP |
> +			ASPEED_I2CD_INTR_ARBIT_LOSS |
> +			ASPEED_I2CD_INTR_RX_DONE |
> +			ASPEED_I2CD_INTR_TX_NAK |
> +			ASPEED_I2CD_INTR_TX_ACK,

Please declare a macro which combines all enabled interrupt events, and
put it somewhere close to ASPEED_I2CD_INTR_* macro definitions.

> +			ASPEED_I2C_INTR_CTRL_REG);
> +
> +	ret = i2c_add_adapter(&bus->adap);
> +	if (ret < 0)
> +		return -ENXIO;

Incorrect, you should propogate the error and "return ret;" here.

> +
> +	platform_set_drvdata(pdev, bus);
> +
> +	dev_info(bus->dev, "i2c bus %d registered, irq %d\n",
> +			bus->adap.nr, bus->irq);
> +
> +	return 0;
> +}
> +
> +static int aspeed_i2c_remove_bus(struct platform_device *pdev)
> +{
> +	struct aspeed_i2c_bus *bus = platform_get_drvdata(pdev);
> +
> +	i2c_del_adapter(&bus->adap);

Please insert an empty line here to improve readability.

> +	return 0;
> +}
> +
> +static const struct of_device_id aspeed_i2c_bus_of_table[] = {
> +	{ .compatible = "aspeed,ast2400-i2c-bus", },
> +	{ .compatible = "aspeed,ast2500-i2c-bus", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table);
> +
> +static struct platform_driver aspeed_i2c_bus_driver = {
> +	.probe		= aspeed_i2c_probe_bus,
> +	.remove		= aspeed_i2c_remove_bus,
> +	.driver		= {
> +		.name		= "ast-i2c-bus",
> +		.of_match_table	= aspeed_i2c_bus_of_table,
> +	},
> +};
> +
> +static void aspeed_i2c_controller_irq(struct irq_desc *desc)
> +{
> +	struct aspeed_i2c_controller *c = irq_desc_get_handler_data(desc);
> +	unsigned long p, status;
> +	unsigned int bus_irq;
> +
> +	status = readl(c->base);
> +	for_each_set_bit(p, &status, ASPEED_I2C_NUM_BUS) {
> +		bus_irq = irq_find_mapping(c->irq_domain, p);
> +		generic_handle_irq(bus_irq);
> +	}

This is a processing of a cascaded interrupt, you should wrap
the code into chained_irq_enter()/chained_irq_exit().

> +}
> +
> +static int aspeed_i2c_probe_controller(struct platform_device *pdev)
> +{
> +	struct aspeed_i2c_controller *controller;
> +	struct device_node *np;
> +	struct resource *res;
> +
> +	controller = kzalloc(sizeof(*controller), GFP_KERNEL);
> +	if (!controller)
> +		return -ENOMEM;

You don't free the allocated memory on driver release, please convert
allocation to devm_kzalloc().

> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	controller->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(controller->base))
> +		return PTR_ERR(controller->base);
> +
> +	controller->irq = platform_get_irq(pdev, 0);
> +	if (controller->irq < 0)
> +		return -ENXIO;
> +
> +	controller->irq_domain = irq_domain_add_linear(pdev->dev.of_node,
> +			ASPEED_I2C_NUM_BUS, &irq_domain_simple_ops, NULL);
> +	if (!controller->irq_domain)
> +		return -ENXIO;

return -ENOMEM is the correct error here.

Please insert an empty line here to improve readability.

> +	controller->irq_domain->name = "ast-i2c-domain";
> +
> +	irq_set_chained_handler_and_data(controller->irq,
> +			aspeed_i2c_controller_irq, controller);
> +
> +	controller->dev = &pdev->dev;
> +
> +	platform_set_drvdata(pdev, controller);
> +
> +	dev_info(controller->dev, "i2c controller registered, irq %d\n",
> +			controller->irq);
> +
> +	for_each_child_of_node(pdev->dev.of_node, np) {
> +		of_platform_device_create(np, NULL, &pdev->dev);
> +		of_node_put(np);

This is invalid use of of_node_put(np) inside for_each_child_of_node().

Just remove it to make the statement valid.

> +	}
> +
> +	return 0;
> +}
> +
> +static int aspeed_i2c_remove_controller(struct platform_device *pdev)
> +{
> +	struct aspeed_i2c_controller *controller = platform_get_drvdata(pdev);
> +
> +	irq_domain_remove(controller->irq_domain);

Please insert an empty line here to improve readability.

> +	return 0;
> +}
> +
> +static const struct of_device_id aspeed_i2c_controller_of_table[] = {
> +	{ .compatible = "aspeed,ast2400-i2c-controller", },
> +	{ .compatible = "aspeed,ast2500-i2c-controller", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, aspeed_i2c_controller_of_table);
> +
> +static struct platform_driver aspeed_i2c_controller_driver = {
> +	.probe		= aspeed_i2c_probe_controller,
> +	.remove		= aspeed_i2c_remove_controller,
> +	.driver		= {
> +		.name		= "ast-i2c-controller",
> +		.of_match_table	= aspeed_i2c_controller_of_table,
> +	},
> +};
> +
> +static int __init aspeed_i2c_driver_init(void)
> +{
> +	int ret;
> +
> +	ret = platform_driver_register(&aspeed_i2c_controller_driver);
> +	if (ret < 0)
> +		return ret;

Please insert an empty line here to improve readability.

> +	return platform_driver_register(&aspeed_i2c_bus_driver);

No, on error you must unregister &aspeed_i2c_controller_driver.

> +}
> +module_init(aspeed_i2c_driver_init);
> +
> +static void __exit aspeed_i2c_driver_exit(void)
> +{
> +	platform_driver_unregister(&aspeed_i2c_bus_driver);
> +	platform_driver_unregister(&aspeed_i2c_controller_driver);
> +}
> +module_exit(aspeed_i2c_driver_exit);
> +
> +MODULE_AUTHOR("Brendan Higgins <brendanhiggins@google.com>");
> +MODULE_DESCRIPTION("Aspeed I2C Bus Driver");
> +MODULE_LICENSE("GPL");
>

Re: [PATCH v4 1/2] i2c: aspeed: added driver for Aspeed I2C

[Brendan Higgins]

Thanks for the comments!

Most of the stuff you suggested was pretty straightforward and will be
in the v5 patchset which I will send out in a bit.

I removed my implementation of the irq_chip; it appears that there is already a
dummy_irq_chip that is intended for just this kind of thing. Let me
know if you think
we still need to loop in the irqchip people.

The remaining comments are addressed below:

> > +#define ASPEED_I2CD_MULTI_MASTER_DIS                   BIT(15)
>
> Unused macro, please remove.

No, it is used below:

> +       /* Enable Master Mode */
> +       aspeed_i2c_write(bus, aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG) |
> +                     ASPEED_I2CD_MASTER_EN |
> +                     ASPEED_I2CD_MULTI_MASTER_DIS, ASPEED_I2C_FUN_CTRL_REG);

> > +#define ASPEED_I2CD_SDA_DRIVE_1T_EN                    BIT(8)
>
> Unused macro, please remove.

No, it is used below:

> +       /* Set AC Timing */
> +       if (clk_freq / 1000 > 400) {
> +               aspeed_i2c_write(bus, aspeed_i2c_read(bus,
> +                                                     ASPEED_I2C_FUN_CTRL_REG) |
> +                               ASPEED_I2CD_M_HIGH_SPEED_EN |
> +                               ASPEED_I2CD_M_SDA_DRIVE_1T_EN |
> +                               ASPEED_I2CD_SDA_DRIVE_1T_EN,
> +                               ASPEED_I2C_FUN_CTRL_REG);

> > +#define ASPEED_I2CD_SLAVE_EN                           BIT(1)
>
> Unused macro, please remove. You add slave support, may be you
> need this control, but it is unused.

No, it is used below:

> +       /* Switch from master mode to slave mode. */
> +       func_ctrl_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG);
> +       func_ctrl_reg_val &= ~ASPEED_I2CD_MASTER_EN;
> +       func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN;

> > +       /* Slave was asked to stop. */
> > +       if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
> > +               status_ack |= ASPEED_I2CD_INTR_NORMAL_STOP;
> > +               bus->slave_state = ASPEED_I2C_SLAVE_STOP;
> > +       }
>
> Add an empty line here.
>
> > +       if (irq_status & ASPEED_I2CD_INTR_TX_NAK) {
> > +               status_ack |= ASPEED_I2CD_INTR_TX_NAK;
> > +               bus->slave_state = ASPEED_I2C_SLAVE_STOP;
> > +       }

Actually, I think this makes more sense without a space as these are
both stop conditions.

> > +static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus,
> > +                           struct platform_device *pdev)
> > +{
> > +       struct clk *pclk;
> > +       u32 clk_freq;
> > +       u32 divider_ratio;
> > +       int ret;
> > +
> > +       pclk = devm_clk_get(&pdev->dev, NULL);
> > +       if (IS_ERR(pclk)) {
> > +               dev_err(&pdev->dev, "clk_get failed\n");
> > +               return PTR_ERR(pclk);
> > +       }
> > +       ret = of_property_read_u32(pdev->dev.of_node,
> > +                       "clock-frequency", &clk_freq);
> > +       if (ret < 0) {
> > +               dev_err(&pdev->dev,
> > +                               "Could not read clock-frequency property\n");
> > +               clk_freq = 100000;
> > +       }
> > +       divider_ratio = clk_get_rate(pclk) / clk_freq;
> > +       /* We just need the clock rate, we don't actually use the clk object. */
> > +       devm_clk_put(&pdev->dev, pclk);
>
> Does the controller have a clock supply? If yes, shall the clock be
> enabled before issuing command to the controller?

No, the clock source for the busses is the APB's clock. The chip does
not really expose
any sophisticated way to manipulate it, so we can just assume it is
always on and is fixed
frequency. Additionally, each bus has its own clock which is just a
divider on the APB's
clock which we set up here. The controller does not participate in this.

> > +static int aspeed_i2c_probe_bus(struct platform_device *pdev)
> > +{
> > +       struct aspeed_i2c_bus *bus;
> > +       struct aspeed_i2c_controller *controller =
> > +                       dev_get_drvdata(pdev->dev.parent);
>
> How do you ensure that "controller" device _driver_ is initialized
> at this point? This is a critical race condition.

aspeed_i2c_probe_controller(...) is responsible for creating the bus
nodes right before it
finishes, so it makes sure that it is sufficiently initialized before
allowing its child busses
to be probed:

> +       for_each_child_of_node(pdev->dev.of_node, np) {
> +               of_platform_device_create(np, NULL, &pdev->dev);
> +               of_node_put(np);
> +       }

Cheers

Re: [PATCH v4 1/2] i2c: aspeed: added driver for Aspeed I2C

[Brendan Higgins]

Thanks for the comments!

Most of the stuff you suggested was pretty straightforward and will be
in the v5 patchset which I will send out in a bit.

I removed my implementation of the irq_chip; it appears that there is already a
dummy_irq_chip that is intended for just this kind of thing. Let me
know if you think
we still need to loop in the irqchip people.

The remaining comments are addressed below:

> > +#define ASPEED_I2CD_MULTI_MASTER_DIS                   BIT(15)
>
> Unused macro, please remove.

No, it is used below:

> +       /* Enable Master Mode */
> +       aspeed_i2c_write(bus, aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG) |
> +                     ASPEED_I2CD_MASTER_EN |
> +                     ASPEED_I2CD_MULTI_MASTER_DIS, ASPEED_I2C_FUN_CTRL_REG);

> > +#define ASPEED_I2CD_SDA_DRIVE_1T_EN                    BIT(8)
>
> Unused macro, please remove.

No, it is used below:

> +       /* Set AC Timing */
> +       if (clk_freq / 1000 > 400) {
> +               aspeed_i2c_write(bus, aspeed_i2c_read(bus,
> +                                                     ASPEED_I2C_FUN_CTRL_REG) |
> +                               ASPEED_I2CD_M_HIGH_SPEED_EN |
> +                               ASPEED_I2CD_M_SDA_DRIVE_1T_EN |
> +                               ASPEED_I2CD_SDA_DRIVE_1T_EN,
> +                               ASPEED_I2C_FUN_CTRL_REG);

> > +#define ASPEED_I2CD_SLAVE_EN                           BIT(1)
>
> Unused macro, please remove. You add slave support, may be you
> need this control, but it is unused.

No, it is used below:

> +       /* Switch from master mode to slave mode. */
> +       func_ctrl_reg_val = aspeed_i2c_read(bus, ASPEED_I2C_FUN_CTRL_REG);
> +       func_ctrl_reg_val &= ~ASPEED_I2CD_MASTER_EN;
> +       func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN;

> > +       /* Slave was asked to stop. */
> > +       if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
> > +               status_ack |= ASPEED_I2CD_INTR_NORMAL_STOP;
> > +               bus->slave_state = ASPEED_I2C_SLAVE_STOP;
> > +       }
>
> Add an empty line here.
>
> > +       if (irq_status & ASPEED_I2CD_INTR_TX_NAK) {
> > +               status_ack |= ASPEED_I2CD_INTR_TX_NAK;
> > +               bus->slave_state = ASPEED_I2C_SLAVE_STOP;
> > +       }

Actually, I think this makes more sense without a space as these are
both stop conditions.

> > +static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus,
> > +                           struct platform_device *pdev)
> > +{
> > +       struct clk *pclk;
> > +       u32 clk_freq;
> > +       u32 divider_ratio;
> > +       int ret;
> > +
> > +       pclk = devm_clk_get(&pdev->dev, NULL);
> > +       if (IS_ERR(pclk)) {
> > +               dev_err(&pdev->dev, "clk_get failed\n");
> > +               return PTR_ERR(pclk);
> > +       }
> > +       ret = of_property_read_u32(pdev->dev.of_node,
> > +                       "clock-frequency", &clk_freq);
> > +       if (ret < 0) {
> > +               dev_err(&pdev->dev,
> > +                               "Could not read clock-frequency property\n");
> > +               clk_freq = 100000;
> > +       }
> > +       divider_ratio = clk_get_rate(pclk) / clk_freq;
> > +       /* We just need the clock rate, we don't actually use the clk object. */
> > +       devm_clk_put(&pdev->dev, pclk);
>
> Does the controller have a clock supply? If yes, shall the clock be
> enabled before issuing command to the controller?

No, the clock source for the busses is the APB's clock. The chip does
not really expose
any sophisticated way to manipulate it, so we can just assume it is
always on and is fixed
frequency. Additionally, each bus has its own clock which is just a
divider on the APB's
clock which we set up here. The controller does not participate in this.

> > +static int aspeed_i2c_probe_bus(struct platform_device *pdev)
> > +{
> > +       struct aspeed_i2c_bus *bus;
> > +       struct aspeed_i2c_controller *controller =
> > +                       dev_get_drvdata(pdev->dev.parent);
>
> How do you ensure that "controller" device _driver_ is initialized
> at this point? This is a critical race condition.

aspeed_i2c_probe_controller(...) is responsible for creating the bus
nodes right before it
finishes, so it makes sure that it is sufficiently initialized before
allowing its child busses
to be probed:

> +       for_each_child_of_node(pdev->dev.of_node, np) {
> +               of_platform_device_create(np, NULL, &pdev->dev);
> +               of_node_put(np);
> +       }

Cheers