From: Sriram Dash <sriram.dash@nxp.com> To: <linux-kernel@vger.kernel.org>, <linux-usb@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org> Cc: <robh+dt@kernel.org>, <mark.rutland@arm.com>, <kishon@ti.com>, <catalin.marinas@arm.com>, <will.deacon@arm.com>, <stern@rowland.harvard.edu>, <pku.leo@gmail.com>, <mathias.nyman@intel.com>, <gregkh@linuxfoundation.org>, <suresh.gupta@nxp.com>, <felipe.balbi@linux.intel.com>, Sriram Dash <sriram.dash@nxp.com> Subject: [PATCH 2/2] arm64: dts: ls1043a: Enable USB 3.0 phy driver Date: Mon, 14 Nov 2016 10:56:55 +0530 [thread overview] Message-ID: <1479101215-26954-3-git-send-email-sriram.dash@nxp.com> (raw) In-Reply-To: <1479101215-26954-1-git-send-email-sriram.dash@nxp.com> This patch adds entries in dts to enable USB 3.0 PHY driver. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> --- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 33 ++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 97d331e..c87fc16 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -475,11 +475,40 @@ <&clockgen 4 0>; }; + usbphy0: usb3-phy@084f0000 { + compatible = "fsl,qoriq-usb3-phy"; + reg = <0x0 0x01570070 0x0 0xC>, + <0x0 0x084F0000 0x0 0x5000>; + reg-names = "param_ctrl", "phy_base"; + #phy-cells = <0>; + phy_type = "utmi"; + }; + + usbphy1: usb3-phy@08500000 { + compatible = "fsl,qoriq-usb3-phy"; + reg = <0x0 0x0157007C 0x0 0xC>, + <0x0 0x08500000 0x0 0x5000>; + reg-names = "param_ctrl", "phy_base"; + #phy-cells = <0>; + phy_type = "utmi"; + }; + + usbphy2: usb3-phy@08510000 { + compatible = "fsl,qoriq-usb3-phy"; + reg = <0x0 0x01570088 0x0 0xC>, + <0x0 0x08510000 0x0 0x5000>; + reg-names = "param_ctrl", "phy_base"; + #phy-cells = <0>; + phy_type = "utmi"; + }; + usb0: usb3@2f00000 { compatible = "snps,dwc3"; reg = <0x0 0x2f00000 0x0 0x10000>; interrupts = <0 60 0x4>; dr_mode = "host"; + phys = <&usbphy0>; + phy-names = "usb3-phy"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; }; @@ -489,6 +518,8 @@ reg = <0x0 0x3000000 0x0 0x10000>; interrupts = <0 61 0x4>; dr_mode = "host"; + phys = <&usbphy1>; + phy-names = "usb3-phy"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; }; @@ -498,6 +529,8 @@ reg = <0x0 0x3100000 0x0 0x10000>; interrupts = <0 63 0x4>; dr_mode = "host"; + phys = <&usbphy2>; + phy-names = "usb3-phy"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; }; -- 2.1.0
WARNING: multiple messages have this Message-ID (diff)
From: Sriram Dash <sriram.dash@nxp.com> To: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: robh+dt@kernel.org, mark.rutland@arm.com, kishon@ti.com, catalin.marinas@arm.com, will.deacon@arm.com, stern@rowland.harvard.edu, pku.leo@gmail.com, mathias.nyman@intel.com, gregkh@linuxfoundation.org, suresh.gupta@nxp.com, felipe.balbi@linux.intel.com, Sriram Dash <sriram.dash@nxp.com> Subject: [PATCH 2/2] arm64: dts: ls1043a: Enable USB 3.0 phy driver Date: Mon, 14 Nov 2016 10:56:55 +0530 [thread overview] Message-ID: <1479101215-26954-3-git-send-email-sriram.dash@nxp.com> (raw) In-Reply-To: <1479101215-26954-1-git-send-email-sriram.dash@nxp.com> This patch adds entries in dts to enable USB 3.0 PHY driver. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> --- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 33 ++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 97d331e..c87fc16 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -475,11 +475,40 @@ <&clockgen 4 0>; }; + usbphy0: usb3-phy@084f0000 { + compatible = "fsl,qoriq-usb3-phy"; + reg = <0x0 0x01570070 0x0 0xC>, + <0x0 0x084F0000 0x0 0x5000>; + reg-names = "param_ctrl", "phy_base"; + #phy-cells = <0>; + phy_type = "utmi"; + }; + + usbphy1: usb3-phy@08500000 { + compatible = "fsl,qoriq-usb3-phy"; + reg = <0x0 0x0157007C 0x0 0xC>, + <0x0 0x08500000 0x0 0x5000>; + reg-names = "param_ctrl", "phy_base"; + #phy-cells = <0>; + phy_type = "utmi"; + }; + + usbphy2: usb3-phy@08510000 { + compatible = "fsl,qoriq-usb3-phy"; + reg = <0x0 0x01570088 0x0 0xC>, + <0x0 0x08510000 0x0 0x5000>; + reg-names = "param_ctrl", "phy_base"; + #phy-cells = <0>; + phy_type = "utmi"; + }; + usb0: usb3@2f00000 { compatible = "snps,dwc3"; reg = <0x0 0x2f00000 0x0 0x10000>; interrupts = <0 60 0x4>; dr_mode = "host"; + phys = <&usbphy0>; + phy-names = "usb3-phy"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; }; @@ -489,6 +518,8 @@ reg = <0x0 0x3000000 0x0 0x10000>; interrupts = <0 61 0x4>; dr_mode = "host"; + phys = <&usbphy1>; + phy-names = "usb3-phy"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; }; @@ -498,6 +529,8 @@ reg = <0x0 0x3100000 0x0 0x10000>; interrupts = <0 63 0x4>; dr_mode = "host"; + phys = <&usbphy2>; + phy-names = "usb3-phy"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; }; -- 2.1.0
next prev parent reply other threads:[~2016-11-14 5:27 UTC|newest] Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-11-14 5:26 [PATCH 0/2] drivers: usb: phy: Add qoriq usb 3.0 phy driver support Sriram Dash 2016-11-14 5:26 ` Sriram Dash 2016-11-14 5:26 ` [PATCH 1/2] " Sriram Dash 2016-11-14 5:26 ` Sriram Dash 2016-11-14 16:07 ` [upstream-release] " Scott Wood 2016-11-14 16:07 ` Scott Wood 2016-11-14 16:07 ` Scott Wood 2016-11-15 12:39 ` Sriram Dash 2016-11-15 12:39 ` Sriram Dash 2016-11-15 12:39 ` Sriram Dash 2016-11-16 7:22 ` Scott Wood 2016-11-16 7:22 ` Scott Wood 2016-11-16 7:22 ` Scott Wood 2016-11-16 11:33 ` Sriram Dash 2016-11-16 11:33 ` Sriram Dash 2016-11-16 11:33 ` Sriram Dash 2016-11-16 21:07 ` Scott Wood 2016-11-16 21:07 ` Scott Wood 2016-11-16 21:07 ` Scott Wood 2016-11-16 0:07 ` Rob Herring 2016-11-16 0:07 ` Rob Herring 2016-11-16 0:07 ` Rob Herring 2016-11-16 5:48 ` Sriram Dash 2016-11-16 5:48 ` Sriram Dash 2016-11-16 5:48 ` Sriram Dash 2016-11-14 5:26 ` Sriram Dash [this message] 2016-11-14 5:26 ` [PATCH 2/2] arm64: dts: ls1043a: Enable USB 3.0 phy driver Sriram Dash
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1479101215-26954-3-git-send-email-sriram.dash@nxp.com \ --to=sriram.dash@nxp.com \ --cc=catalin.marinas@arm.com \ --cc=devicetree@vger.kernel.org \ --cc=felipe.balbi@linux.intel.com \ --cc=gregkh@linuxfoundation.org \ --cc=kishon@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=mathias.nyman@intel.com \ --cc=pku.leo@gmail.com \ --cc=robh+dt@kernel.org \ --cc=stern@rowland.harvard.edu \ --cc=suresh.gupta@nxp.com \ --cc=will.deacon@arm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.