From: Sudeep Holla <sudeep.holla-5wv7dgnIgG8@public.gmane.org> To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Cc: Sudeep Holla <sudeep.holla-5wv7dgnIgG8@public.gmane.org>, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>, Alexandre Belloni <alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>, Jean-Christophe Plagniol-Villard <plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org> Subject: [PATCH] ARM: dts: at91: replace gpio-key,wakeup with wakeup-source for sam9260ek Date: Mon, 14 Nov 2016 15:44:08 +0000 [thread overview] Message-ID: <1479138250-17780-2-git-send-email-sudeep.holla@arm.com> (raw) Though the keyboard driver for GPIO buttons(gpio-keys) will continue to check for/support the legacy "gpio-key,wakeup" boolean property to enable gpio buttons as wakeup source, "wakeup-source" is the new standard binding. This patch replaces the legacy "gpio-key,wakeup" with the unified "wakeup-source" property in order to avoid any further copy-paste duplication. Cc: Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org> Cc: Alexandre Belloni <alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> Cc: Jean-Christophe Plagniol-Villard <plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org> Signed-off-by: Sudeep Holla <sudeep.holla-5wv7dgnIgG8@public.gmane.org> --- arch/arm/boot/dts/at91sam9260ek.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) Hi, Inspite of getting rid of most of the legacy property almost a year ago, addition of new platforms have brought this back and over time it's now found again in few places. Just get rid of them *again* Regards, Sudeep diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts index 2c87f58448e7..b2578feceb08 100644 --- a/arch/arm/boot/dts/at91sam9260ek.dts +++ b/arch/arm/boot/dts/at91sam9260ek.dts @@ -174,14 +174,14 @@ label = "Button 3"; gpios = <&pioA 30 GPIO_ACTIVE_LOW>; linux,code = <0x103>; - gpio-key,wakeup; + wakeup-source; }; btn4 { label = "Button 4"; gpios = <&pioA 31 GPIO_ACTIVE_LOW>; linux,code = <0x104>; - gpio-key,wakeup; + wakeup-source; }; }; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: sudeep.holla@arm.com (Sudeep Holla) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH] ARM: dts: at91: replace gpio-key, wakeup with wakeup-source for sam9260ek Date: Mon, 14 Nov 2016 15:44:08 +0000 [thread overview] Message-ID: <1479138250-17780-2-git-send-email-sudeep.holla@arm.com> (raw) Though the keyboard driver for GPIO buttons(gpio-keys) will continue to check for/support the legacy "gpio-key,wakeup" boolean property to enable gpio buttons as wakeup source, "wakeup-source" is the new standard binding. This patch replaces the legacy "gpio-key,wakeup" with the unified "wakeup-source" property in order to avoid any further copy-paste duplication. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> --- arch/arm/boot/dts/at91sam9260ek.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) Hi, Inspite of getting rid of most of the legacy property almost a year ago, addition of new platforms have brought this back and over time it's now found again in few places. Just get rid of them *again* Regards, Sudeep diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts index 2c87f58448e7..b2578feceb08 100644 --- a/arch/arm/boot/dts/at91sam9260ek.dts +++ b/arch/arm/boot/dts/at91sam9260ek.dts @@ -174,14 +174,14 @@ label = "Button 3"; gpios = <&pioA 30 GPIO_ACTIVE_LOW>; linux,code = <0x103>; - gpio-key,wakeup; + wakeup-source; }; btn4 { label = "Button 4"; gpios = <&pioA 31 GPIO_ACTIVE_LOW>; linux,code = <0x104>; - gpio-key,wakeup; + wakeup-source; }; }; -- 2.7.4
next reply other threads:[~2016-11-14 15:44 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-11-14 15:44 Sudeep Holla [this message] 2016-11-14 15:44 ` [PATCH] ARM: dts: at91: replace gpio-key, wakeup with wakeup-source for sam9260ek Sudeep Holla [not found] ` <1479138250-17780-2-git-send-email-sudeep.holla-5wv7dgnIgG8@public.gmane.org> 2016-11-14 15:45 ` [PATCH] ARM: dts: at91: replace gpio-key,wakeup " Nicolas Ferre 2016-11-14 15:45 ` Nicolas Ferre [not found] ` <55e95acc-d30f-432e-90d6-f96bad69ac3d-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org> 2016-11-14 15:51 ` Sudeep Holla 2016-11-14 15:51 ` Sudeep Holla 2016-11-14 16:04 ` Alexandre Belloni 2016-11-14 16:04 ` Alexandre Belloni
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1479138250-17780-2-git-send-email-sudeep.holla@arm.com \ --to=sudeep.holla-5wv7dgnigg8@public.gmane.org \ --cc=alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \ --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org \ --cc=plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.