From: Raviteja Garimella <raviteja.garimella@broadcom.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
Jon Mason <jonmason@broadcom.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] Add DT bindings documentation for NS2 USB DRD phy
Date: Wed, 30 Nov 2016 11:25:36 +0530 [thread overview]
Message-ID: <1480485338-23451-2-git-send-email-raviteja.garimella@broadcom.com> (raw)
In-Reply-To: <1480485338-23451-1-git-send-email-raviteja.garimella@broadcom.com>
This patch adds documentation for NS2 DRD Phy driver DT bindings
Signed-off-by: Raviteja Garimella <raviteja.garimella@broadcom.com>
---
.../devicetree/bindings/phy/brcm,ns2-drd-phy.txt | 40 ++++++++++++++++++++++
1 file changed, 40 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt b/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt
new file mode 100644
index 0000000..5857f99
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt
@@ -0,0 +1,40 @@
+BROADCOM NORTHSTAR2 USB2 (DUAL ROLE DEVICE) PHY
+
+Required properties:
+ - compatible: brcm,ns2-drd-phy
+ - reg: offset and length of the NS2 PHY related registers.
+ - reg-names
+ The below registers must be provided.
+ icfg - for DRD ICFG configurations
+ rst-ctrl - for DRD IDM reset
+ crmu-ctrl - for CRMU core vdd, PHY and PHY PLL reset
+ usb2-strap - for port over current polarity reversal
+ - #phy-cells: Must be 0. No args required.
+ - vbus-gpios: vbus gpio binding
+ - id-gpios: id gpio binding
+
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Example:
+ gpio_g: gpio@660a0000 {
+ compatible = "brcm,iproc-gpio";
+ reg = <0x660a0000 0x50>;
+ ngpios = <32>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ usbdrd_phy: phy@66000960 {
+ #phy-cells = <0>;
+ compatible = "brcm,ns2-drd-phy";
+ reg = <0x66000960 0x24>,
+ <0x67012800 0x4>,
+ <0x6501d148 0x4>,
+ <0x664d0700 0x4>;
+ reg-names = "icfg", "rst-ctrl",
+ "crmu-ctrl", "usb2-strap";
+ id-gpios = <&gpio_g 30 0>;
+ vbus-gpios = <&gpio_g 31 0>;
+ };
--
2.1.0
WARNING: multiple messages have this Message-ID (diff)
From: Raviteja Garimella <raviteja.garimella-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
To: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>,
Ray Jui <rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
Scott Branden <sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
Jon Mason <jonmason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
Catalin Marinas <catalin.marinas-5wv7dgnIgG8@public.gmane.org>,
Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH 1/3] Add DT bindings documentation for NS2 USB DRD phy
Date: Wed, 30 Nov 2016 11:25:36 +0530 [thread overview]
Message-ID: <1480485338-23451-2-git-send-email-raviteja.garimella@broadcom.com> (raw)
In-Reply-To: <1480485338-23451-1-git-send-email-raviteja.garimella-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
This patch adds documentation for NS2 DRD Phy driver DT bindings
Signed-off-by: Raviteja Garimella <raviteja.garimella-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
---
.../devicetree/bindings/phy/brcm,ns2-drd-phy.txt | 40 ++++++++++++++++++++++
1 file changed, 40 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt b/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt
new file mode 100644
index 0000000..5857f99
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt
@@ -0,0 +1,40 @@
+BROADCOM NORTHSTAR2 USB2 (DUAL ROLE DEVICE) PHY
+
+Required properties:
+ - compatible: brcm,ns2-drd-phy
+ - reg: offset and length of the NS2 PHY related registers.
+ - reg-names
+ The below registers must be provided.
+ icfg - for DRD ICFG configurations
+ rst-ctrl - for DRD IDM reset
+ crmu-ctrl - for CRMU core vdd, PHY and PHY PLL reset
+ usb2-strap - for port over current polarity reversal
+ - #phy-cells: Must be 0. No args required.
+ - vbus-gpios: vbus gpio binding
+ - id-gpios: id gpio binding
+
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Example:
+ gpio_g: gpio@660a0000 {
+ compatible = "brcm,iproc-gpio";
+ reg = <0x660a0000 0x50>;
+ ngpios = <32>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ usbdrd_phy: phy@66000960 {
+ #phy-cells = <0>;
+ compatible = "brcm,ns2-drd-phy";
+ reg = <0x66000960 0x24>,
+ <0x67012800 0x4>,
+ <0x6501d148 0x4>,
+ <0x664d0700 0x4>;
+ reg-names = "icfg", "rst-ctrl",
+ "crmu-ctrl", "usb2-strap";
+ id-gpios = <&gpio_g 30 0>;
+ vbus-gpios = <&gpio_g 31 0>;
+ };
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: raviteja.garimella@broadcom.com (Raviteja Garimella)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] Add DT bindings documentation for NS2 USB DRD phy
Date: Wed, 30 Nov 2016 11:25:36 +0530 [thread overview]
Message-ID: <1480485338-23451-2-git-send-email-raviteja.garimella@broadcom.com> (raw)
In-Reply-To: <1480485338-23451-1-git-send-email-raviteja.garimella@broadcom.com>
This patch adds documentation for NS2 DRD Phy driver DT bindings
Signed-off-by: Raviteja Garimella <raviteja.garimella@broadcom.com>
---
.../devicetree/bindings/phy/brcm,ns2-drd-phy.txt | 40 ++++++++++++++++++++++
1 file changed, 40 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt b/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt
new file mode 100644
index 0000000..5857f99
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt
@@ -0,0 +1,40 @@
+BROADCOM NORTHSTAR2 USB2 (DUAL ROLE DEVICE) PHY
+
+Required properties:
+ - compatible: brcm,ns2-drd-phy
+ - reg: offset and length of the NS2 PHY related registers.
+ - reg-names
+ The below registers must be provided.
+ icfg - for DRD ICFG configurations
+ rst-ctrl - for DRD IDM reset
+ crmu-ctrl - for CRMU core vdd, PHY and PHY PLL reset
+ usb2-strap - for port over current polarity reversal
+ - #phy-cells: Must be 0. No args required.
+ - vbus-gpios: vbus gpio binding
+ - id-gpios: id gpio binding
+
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Example:
+ gpio_g: gpio at 660a0000 {
+ compatible = "brcm,iproc-gpio";
+ reg = <0x660a0000 0x50>;
+ ngpios = <32>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ usbdrd_phy: phy at 66000960 {
+ #phy-cells = <0>;
+ compatible = "brcm,ns2-drd-phy";
+ reg = <0x66000960 0x24>,
+ <0x67012800 0x4>,
+ <0x6501d148 0x4>,
+ <0x664d0700 0x4>;
+ reg-names = "icfg", "rst-ctrl",
+ "crmu-ctrl", "usb2-strap";
+ id-gpios = <&gpio_g 30 0>;
+ vbus-gpios = <&gpio_g 31 0>;
+ };
--
2.1.0
next prev parent reply other threads:[~2016-11-30 5:56 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-30 5:55 [PATCH 0/3] Support for USB DRD Phy driver for NS2 Raviteja Garimella
2016-11-30 5:55 ` Raviteja Garimella
2016-11-30 5:55 ` Raviteja Garimella
2016-11-30 5:55 ` Raviteja Garimella [this message]
2016-11-30 5:55 ` [PATCH 1/3] Add DT bindings documentation for NS2 USB DRD phy Raviteja Garimella
2016-11-30 5:55 ` Raviteja Garimella
2016-12-05 23:09 ` Rob Herring
2016-12-05 23:09 ` Rob Herring
2016-12-05 23:09 ` Rob Herring
2016-11-30 5:55 ` [PATCH 2/3] Broadcom USB DRD Phy driver for Northstar2 Raviteja Garimella
2016-11-30 5:55 ` Raviteja Garimella
2016-11-30 5:55 ` Raviteja Garimella
2017-01-16 9:22 ` Kishon Vijay Abraham I
2017-01-16 9:22 ` Kishon Vijay Abraham I
2017-01-16 9:22 ` Kishon Vijay Abraham I
2017-01-16 10:51 ` Raviteja Garimella
2017-01-16 10:51 ` Raviteja Garimella
2017-01-16 10:51 ` Raviteja Garimella
2016-11-30 5:55 ` [PATCH 3/3] DT nodes for Broadcom Northstar2 USB DRD Phy Raviteja Garimella
2016-11-30 5:55 ` Raviteja Garimella
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1480485338-23451-2-git-send-email-raviteja.garimella@broadcom.com \
--to=raviteja.garimella@broadcom.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=jonmason@broadcom.com \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=sbranden@broadcom.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.