[PATCH 0/2] mmc: host: s3cmci: add device tree support

[PATCH 0/2] mmc: host: s3cmci: add device tree support

[Sergio Prado]

This series adds support for configuring Samsung's S3C24XX MMC/SD/SDIO
controller via device tree.

Tested on FriendlyARM mini2440, based on s3c2440 SoC.

Sergio Prado (2):
  dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller
  mmc: host: s3cmci: allow probing from device tree

 .../devicetree/bindings/mmc/samsung,s3cmci.txt     |  38 +++++
 drivers/mmc/host/s3cmci.c                          | 155 +++++++++++++++++----
 2 files changed, 169 insertions(+), 24 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt

-- 
1.9.1

[PATCH 0/2] mmc: host: s3cmci: add device tree support

[Sergio Prado]

This series adds support for configuring Samsung's S3C24XX MMC/SD/SDIO
controller via device tree.

Tested on FriendlyARM mini2440, based on s3c2440 SoC.

Sergio Prado (2):
  dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller
  mmc: host: s3cmci: allow probing from device tree

 .../devicetree/bindings/mmc/samsung,s3cmci.txt     |  38 +++++
 drivers/mmc/host/s3cmci.c                          | 155 +++++++++++++++++----
 2 files changed, 169 insertions(+), 24 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt

-- 
1.9.1

[PATCH 1/2] dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller

[Sergio Prado]

Adds the device tree bindings description for Samsung S3C24XX
MMC/SD/SDIO controller, used as a connectivity interface with external
MMC, SD and SDIO storage mediums.

Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
---
 .../devicetree/bindings/mmc/samsung,s3cmci.txt     | 38 ++++++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt

diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
new file mode 100644
index 000000000000..3f044076e69a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
@@ -0,0 +1,38 @@
+* Samsung's S3C24XX MMC/SD/SDIO controller device tree bindings
+
+Samsung's S3C24XX MMC/SD/SDIO controller is used as a connectivity interface
+with external MMC, SD and SDIO storage mediums.
+
+This file documents differences between the core mmc properties described by
+mmc.txt and the properties used by the Samsung S3C24XX MMC/SD/SDIO controller
+implementation.
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+  - "samsung,s3c2410-sdi": for controllers compatible with s3c2410
+  - "samsung,s3c2412-sdi": for controllers compatible with s3c2412
+  - "samsung,s3c2440-sdi": for controllers compatible with s3c2440
+- clocks: Should reference the controller clock
+- clock-names: Should contain "sdi"
+
+Required Board Specific Properties:
+- pinctrl-0: Should specify pin control groups used for this controller.
+- pinctrl-names: Should contain only one value - "default".
+
+Example:
+	sdi: sdi@5a000000 {
+		compatible = "samsung,s3c2440-sdi";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdi_pins>;
+		reg = <0x5a000000 0x100000>;
+		interrupts = <0 0 21 3>;
+		clocks = <&clocks PCLK_SDI>;
+		clock-names = "sdi";
+		bus-width = <4>;
+		cd-gpios = <&gpg 8 GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gph 8 GPIO_ACTIVE_LOW>;
+	};
+
+	Note: This example shows both SoC specific and board specific properties
+	in a single device node. The properties can be actually be separated
+	into SoC specific node and board specific node.
-- 
1.9.1

[PATCH 1/2] dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller

[Sergio Prado]

Adds the device tree bindings description for Samsung S3C24XX
MMC/SD/SDIO controller, used as a connectivity interface with external
MMC, SD and SDIO storage mediums.

Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
---
 .../devicetree/bindings/mmc/samsung,s3cmci.txt     | 38 ++++++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt

diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
new file mode 100644
index 000000000000..3f044076e69a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
@@ -0,0 +1,38 @@
+* Samsung's S3C24XX MMC/SD/SDIO controller device tree bindings
+
+Samsung's S3C24XX MMC/SD/SDIO controller is used as a connectivity interface
+with external MMC, SD and SDIO storage mediums.
+
+This file documents differences between the core mmc properties described by
+mmc.txt and the properties used by the Samsung S3C24XX MMC/SD/SDIO controller
+implementation.
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+  - "samsung,s3c2410-sdi": for controllers compatible with s3c2410
+  - "samsung,s3c2412-sdi": for controllers compatible with s3c2412
+  - "samsung,s3c2440-sdi": for controllers compatible with s3c2440
+- clocks: Should reference the controller clock
+- clock-names: Should contain "sdi"
+
+Required Board Specific Properties:
+- pinctrl-0: Should specify pin control groups used for this controller.
+- pinctrl-names: Should contain only one value - "default".
+
+Example:
+	sdi: sdi at 5a000000 {
+		compatible = "samsung,s3c2440-sdi";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdi_pins>;
+		reg = <0x5a000000 0x100000>;
+		interrupts = <0 0 21 3>;
+		clocks = <&clocks PCLK_SDI>;
+		clock-names = "sdi";
+		bus-width = <4>;
+		cd-gpios = <&gpg 8 GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gph 8 GPIO_ACTIVE_LOW>;
+	};
+
+	Note: This example shows both SoC specific and board specific properties
+	in a single device node. The properties can be actually be separated
+	into SoC specific node and board specific node.
-- 
1.9.1

[PATCH 2/2] mmc: host: s3cmci: allow probing from device tree

[Sergio Prado]

Allows configuring Samsung S3C24XX MMC/SD/SDIO controller using a device
tree.

Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
---
 drivers/mmc/host/s3cmci.c | 155 +++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 131 insertions(+), 24 deletions(-)

diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 932a4b1fed33..bfeb90e8ffee 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -23,6 +23,9 @@
 #include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
 
 #include <plat/gpio-cfg.h>
 #include <mach/dma.h>
@@ -127,6 +130,22 @@ enum dbg_channels {
 	dbg_conf  = (1 << 8),
 };
 
+struct s3cmci_drv_data {
+	int is2440;
+};
+
+static const struct s3cmci_drv_data s3c2410_s3cmci_drv_data = {
+	.is2440 = 0,
+};
+
+static const struct s3cmci_drv_data s3c2412_s3cmci_drv_data = {
+	.is2440 = 1,
+};
+
+static const struct s3cmci_drv_data s3c2440_s3cmci_drv_data = {
+	.is2440 = 1,
+};
+
 static const int dbgmap_err   = dbg_fail;
 static const int dbgmap_info  = dbg_info | dbg_conf;
 static const int dbgmap_debug = dbg_err | dbg_debug;
@@ -1241,8 +1260,9 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	case MMC_POWER_ON:
 	case MMC_POWER_UP:
 		/* Configure GPE5...GPE10 pins in SD mode */
-		s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
-				      S3C_GPIO_PULL_NONE);
+		if (!host->pdev->dev.of_node)
+			s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
+					      S3C_GPIO_PULL_NONE);
 
 		if (host->pdata->set_power)
 			host->pdata->set_power(ios->power_mode, ios->vdd);
@@ -1254,7 +1274,8 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 	case MMC_POWER_OFF:
 	default:
-		gpio_direction_output(S3C2410_GPE(5), 0);
+		if (!host->pdev->dev.of_node)
+			gpio_direction_output(S3C2410_GPE(5), 0);
 
 		if (host->is2440)
 			mci_con |= S3C2440_SDICON_SDRESET;
@@ -1544,21 +1565,12 @@ static inline void s3cmci_debugfs_remove(struct s3cmci_host *host) { }
 
 #endif /* CONFIG_DEBUG_FS */
 
-static int s3cmci_probe(struct platform_device *pdev)
+static int s3cmci_probe_pdata(struct s3cmci_host *host)
 {
-	struct s3cmci_host *host;
-	struct mmc_host	*mmc;
-	int ret;
-	int is2440;
-	int i;
+	struct platform_device *pdev = host->pdev;
+	int i, ret;
 
-	is2440 = platform_get_device_id(pdev)->driver_data;
-
-	mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
-	if (!mmc) {
-		ret = -ENOMEM;
-		goto probe_out;
-	}
+	host->is2440 = platform_get_device_id(pdev)->driver_data;
 
 	for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) {
 		ret = gpio_request(i, dev_name(&pdev->dev));
@@ -1568,14 +1580,90 @@ static int s3cmci_probe(struct platform_device *pdev)
 			for (i--; i >= S3C2410_GPE(5); i--)
 				gpio_free(i);
 
-			goto probe_free_host;
+			return ret;
 		}
 	}
 
+	return 0;
+}
+
+static int s3cmci_probe_dt(struct s3cmci_host *host)
+{
+	struct platform_device *pdev = host->pdev;
+	struct s3c24xx_mci_pdata *pdata;
+	const struct s3cmci_drv_data *drvdata;
+	struct mmc_host *mmc = host->mmc;
+	int gpio, ret;
+
+	drvdata = of_device_get_match_data(&pdev->dev);
+	if (!drvdata)
+		return -ENODEV;
+
+	host->is2440 = drvdata->is2440;
+
+	ret = mmc_of_parse(mmc);
+	if (ret)
+		return ret;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	pdata->ocr_avail = mmc->ocr_avail;
+
+	if (mmc->caps2 & MMC_CAP2_NO_WRITE_PROTECT)
+		pdata->no_wprotect = 1;
+
+	if (mmc->caps & MMC_CAP_NEEDS_POLL)
+		pdata->no_detect = 1;
+
+	if (mmc->caps2 & MMC_CAP2_RO_ACTIVE_HIGH)
+		pdata->wprotect_invert = 1;
+
+	if (mmc->caps2 & MMC_CAP2_CD_ACTIVE_HIGH)
+		pdata->detect_invert = 1;
+
+	gpio = of_get_named_gpio(pdev->dev.of_node, "cd-gpios", 0);
+	if (gpio_is_valid(gpio)) {
+		pdata->gpio_detect = gpio;
+		gpio_free(gpio);
+	}
+
+	gpio = of_get_named_gpio(pdev->dev.of_node, "wp-gpios", 0);
+	if (gpio_is_valid(gpio)) {
+		pdata->gpio_wprotect = gpio;
+		gpio_free(gpio);
+	}
+
+	pdev->dev.platform_data = pdata;
+
+	return 0;
+}
+
+static int s3cmci_probe(struct platform_device *pdev)
+{
+	struct s3cmci_host *host;
+	struct mmc_host	*mmc;
+	int ret;
+	int i;
+
+	mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
+	if (!mmc) {
+		ret = -ENOMEM;
+		goto probe_out;
+	}
+
 	host = mmc_priv(mmc);
 	host->mmc 	= mmc;
 	host->pdev	= pdev;
-	host->is2440	= is2440;
+
+	if (pdev->dev.of_node)
+		ret = s3cmci_probe_dt(host);
+	else
+		ret = s3cmci_probe_pdata(host);
+
+	if (ret)
+		goto probe_free_host;
 
 	host->pdata = pdev->dev.platform_data;
 	if (!host->pdata) {
@@ -1586,7 +1674,7 @@ static int s3cmci_probe(struct platform_device *pdev)
 	spin_lock_init(&host->complete_lock);
 	tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host);
 
-	if (is2440) {
+	if (host->is2440) {
 		host->sdiimsk	= S3C2440_SDIIMSK;
 		host->sdidata	= S3C2440_SDIDATA;
 		host->clk_div	= 1;
@@ -1789,8 +1877,9 @@ static int s3cmci_probe(struct platform_device *pdev)
 	release_mem_region(host->mem->start, resource_size(host->mem));
 
  probe_free_gpio:
-	for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
-		gpio_free(i);
+	if (!pdev->dev.of_node)
+		for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
+			gpio_free(i);
 
  probe_free_host:
 	mmc_free_host(mmc);
@@ -1837,9 +1926,9 @@ static int s3cmci_remove(struct platform_device *pdev)
 	if (!pd->no_detect)
 		gpio_free(pd->gpio_detect);
 
-	for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
-		gpio_free(i);
-
+	if (!pdev->dev.of_node)
+		for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
+			gpio_free(i);
 
 	iounmap(host->base);
 	release_mem_region(host->mem->start, resource_size(host->mem));
@@ -1848,6 +1937,23 @@ static int s3cmci_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id s3cmci_dt_match[] = {
+	{
+		.compatible = "samsung,s3c2410-sdi",
+		.data = &s3c2410_s3cmci_drv_data,
+	},
+	{
+		.compatible = "samsung,s3c2412-sdi",
+		.data = &s3c2412_s3cmci_drv_data,
+	},
+	{
+		.compatible = "samsung,s3c2440-sdi",
+		.data = &s3c2440_s3cmci_drv_data,
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, sdhci_s3c_dt_match);
+
 static const struct platform_device_id s3cmci_driver_ids[] = {
 	{
 		.name	= "s3c2410-sdi",
@@ -1867,6 +1973,7 @@ static int s3cmci_remove(struct platform_device *pdev)
 static struct platform_driver s3cmci_driver = {
 	.driver	= {
 		.name	= "s3c-sdi",
+		.of_match_table = s3cmci_dt_match,
 	},
 	.id_table	= s3cmci_driver_ids,
 	.probe		= s3cmci_probe,
-- 
1.9.1

[PATCH 2/2] mmc: host: s3cmci: allow probing from device tree

[Sergio Prado]

Allows configuring Samsung S3C24XX MMC/SD/SDIO controller using a device
tree.

Signed-off-by: Sergio Prado <sergio.prado-1e4yhPs3/ABSwrhanM7KvQ@public.gmane.org>
---
 drivers/mmc/host/s3cmci.c | 155 +++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 131 insertions(+), 24 deletions(-)

diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 932a4b1fed33..bfeb90e8ffee 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -23,6 +23,9 @@
 #include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
 
 #include <plat/gpio-cfg.h>
 #include <mach/dma.h>
@@ -127,6 +130,22 @@ enum dbg_channels {
 	dbg_conf  = (1 << 8),
 };
 
+struct s3cmci_drv_data {
+	int is2440;
+};
+
+static const struct s3cmci_drv_data s3c2410_s3cmci_drv_data = {
+	.is2440 = 0,
+};
+
+static const struct s3cmci_drv_data s3c2412_s3cmci_drv_data = {
+	.is2440 = 1,
+};
+
+static const struct s3cmci_drv_data s3c2440_s3cmci_drv_data = {
+	.is2440 = 1,
+};
+
 static const int dbgmap_err   = dbg_fail;
 static const int dbgmap_info  = dbg_info | dbg_conf;
 static const int dbgmap_debug = dbg_err | dbg_debug;
@@ -1241,8 +1260,9 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	case MMC_POWER_ON:
 	case MMC_POWER_UP:
 		/* Configure GPE5...GPE10 pins in SD mode */
-		s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
-				      S3C_GPIO_PULL_NONE);
+		if (!host->pdev->dev.of_node)
+			s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
+					      S3C_GPIO_PULL_NONE);
 
 		if (host->pdata->set_power)
 			host->pdata->set_power(ios->power_mode, ios->vdd);
@@ -1254,7 +1274,8 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 	case MMC_POWER_OFF:
 	default:
-		gpio_direction_output(S3C2410_GPE(5), 0);
+		if (!host->pdev->dev.of_node)
+			gpio_direction_output(S3C2410_GPE(5), 0);
 
 		if (host->is2440)
 			mci_con |= S3C2440_SDICON_SDRESET;
@@ -1544,21 +1565,12 @@ static inline void s3cmci_debugfs_remove(struct s3cmci_host *host) { }
 
 #endif /* CONFIG_DEBUG_FS */
 
-static int s3cmci_probe(struct platform_device *pdev)
+static int s3cmci_probe_pdata(struct s3cmci_host *host)
 {
-	struct s3cmci_host *host;
-	struct mmc_host	*mmc;
-	int ret;
-	int is2440;
-	int i;
+	struct platform_device *pdev = host->pdev;
+	int i, ret;
 
-	is2440 = platform_get_device_id(pdev)->driver_data;
-
-	mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
-	if (!mmc) {
-		ret = -ENOMEM;
-		goto probe_out;
-	}
+	host->is2440 = platform_get_device_id(pdev)->driver_data;
 
 	for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) {
 		ret = gpio_request(i, dev_name(&pdev->dev));
@@ -1568,14 +1580,90 @@ static int s3cmci_probe(struct platform_device *pdev)
 			for (i--; i >= S3C2410_GPE(5); i--)
 				gpio_free(i);
 
-			goto probe_free_host;
+			return ret;
 		}
 	}
 
+	return 0;
+}
+
+static int s3cmci_probe_dt(struct s3cmci_host *host)
+{
+	struct platform_device *pdev = host->pdev;
+	struct s3c24xx_mci_pdata *pdata;
+	const struct s3cmci_drv_data *drvdata;
+	struct mmc_host *mmc = host->mmc;
+	int gpio, ret;
+
+	drvdata = of_device_get_match_data(&pdev->dev);
+	if (!drvdata)
+		return -ENODEV;
+
+	host->is2440 = drvdata->is2440;
+
+	ret = mmc_of_parse(mmc);
+	if (ret)
+		return ret;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	pdata->ocr_avail = mmc->ocr_avail;
+
+	if (mmc->caps2 & MMC_CAP2_NO_WRITE_PROTECT)
+		pdata->no_wprotect = 1;
+
+	if (mmc->caps & MMC_CAP_NEEDS_POLL)
+		pdata->no_detect = 1;
+
+	if (mmc->caps2 & MMC_CAP2_RO_ACTIVE_HIGH)
+		pdata->wprotect_invert = 1;
+
+	if (mmc->caps2 & MMC_CAP2_CD_ACTIVE_HIGH)
+		pdata->detect_invert = 1;
+
+	gpio = of_get_named_gpio(pdev->dev.of_node, "cd-gpios", 0);
+	if (gpio_is_valid(gpio)) {
+		pdata->gpio_detect = gpio;
+		gpio_free(gpio);
+	}
+
+	gpio = of_get_named_gpio(pdev->dev.of_node, "wp-gpios", 0);
+	if (gpio_is_valid(gpio)) {
+		pdata->gpio_wprotect = gpio;
+		gpio_free(gpio);
+	}
+
+	pdev->dev.platform_data = pdata;
+
+	return 0;
+}
+
+static int s3cmci_probe(struct platform_device *pdev)
+{
+	struct s3cmci_host *host;
+	struct mmc_host	*mmc;
+	int ret;
+	int i;
+
+	mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
+	if (!mmc) {
+		ret = -ENOMEM;
+		goto probe_out;
+	}
+
 	host = mmc_priv(mmc);
 	host->mmc 	= mmc;
 	host->pdev	= pdev;
-	host->is2440	= is2440;
+
+	if (pdev->dev.of_node)
+		ret = s3cmci_probe_dt(host);
+	else
+		ret = s3cmci_probe_pdata(host);
+
+	if (ret)
+		goto probe_free_host;
 
 	host->pdata = pdev->dev.platform_data;
 	if (!host->pdata) {
@@ -1586,7 +1674,7 @@ static int s3cmci_probe(struct platform_device *pdev)
 	spin_lock_init(&host->complete_lock);
 	tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host);
 
-	if (is2440) {
+	if (host->is2440) {
 		host->sdiimsk	= S3C2440_SDIIMSK;
 		host->sdidata	= S3C2440_SDIDATA;
 		host->clk_div	= 1;
@@ -1789,8 +1877,9 @@ static int s3cmci_probe(struct platform_device *pdev)
 	release_mem_region(host->mem->start, resource_size(host->mem));
 
  probe_free_gpio:
-	for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
-		gpio_free(i);
+	if (!pdev->dev.of_node)
+		for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
+			gpio_free(i);
 
  probe_free_host:
 	mmc_free_host(mmc);
@@ -1837,9 +1926,9 @@ static int s3cmci_remove(struct platform_device *pdev)
 	if (!pd->no_detect)
 		gpio_free(pd->gpio_detect);
 
-	for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
-		gpio_free(i);
-
+	if (!pdev->dev.of_node)
+		for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
+			gpio_free(i);
 
 	iounmap(host->base);
 	release_mem_region(host->mem->start, resource_size(host->mem));
@@ -1848,6 +1937,23 @@ static int s3cmci_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id s3cmci_dt_match[] = {
+	{
+		.compatible = "samsung,s3c2410-sdi",
+		.data = &s3c2410_s3cmci_drv_data,
+	},
+	{
+		.compatible = "samsung,s3c2412-sdi",
+		.data = &s3c2412_s3cmci_drv_data,
+	},
+	{
+		.compatible = "samsung,s3c2440-sdi",
+		.data = &s3c2440_s3cmci_drv_data,
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, sdhci_s3c_dt_match);
+
 static const struct platform_device_id s3cmci_driver_ids[] = {
 	{
 		.name	= "s3c2410-sdi",
@@ -1867,6 +1973,7 @@ static int s3cmci_remove(struct platform_device *pdev)
 static struct platform_driver s3cmci_driver = {
 	.driver	= {
 		.name	= "s3c-sdi",
+		.of_match_table = s3cmci_dt_match,
 	},
 	.id_table	= s3cmci_driver_ids,
 	.probe		= s3cmci_probe,
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/2] mmc: host: s3cmci: allow probing from device tree

[Sergio Prado]

Allows configuring Samsung S3C24XX MMC/SD/SDIO controller using a device
tree.

Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
---
 drivers/mmc/host/s3cmci.c | 155 +++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 131 insertions(+), 24 deletions(-)

diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 932a4b1fed33..bfeb90e8ffee 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -23,6 +23,9 @@
 #include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
 
 #include <plat/gpio-cfg.h>
 #include <mach/dma.h>
@@ -127,6 +130,22 @@ enum dbg_channels {
 	dbg_conf  = (1 << 8),
 };
 
+struct s3cmci_drv_data {
+	int is2440;
+};
+
+static const struct s3cmci_drv_data s3c2410_s3cmci_drv_data = {
+	.is2440 = 0,
+};
+
+static const struct s3cmci_drv_data s3c2412_s3cmci_drv_data = {
+	.is2440 = 1,
+};
+
+static const struct s3cmci_drv_data s3c2440_s3cmci_drv_data = {
+	.is2440 = 1,
+};
+
 static const int dbgmap_err   = dbg_fail;
 static const int dbgmap_info  = dbg_info | dbg_conf;
 static const int dbgmap_debug = dbg_err | dbg_debug;
@@ -1241,8 +1260,9 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	case MMC_POWER_ON:
 	case MMC_POWER_UP:
 		/* Configure GPE5...GPE10 pins in SD mode */
-		s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
-				      S3C_GPIO_PULL_NONE);
+		if (!host->pdev->dev.of_node)
+			s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
+					      S3C_GPIO_PULL_NONE);
 
 		if (host->pdata->set_power)
 			host->pdata->set_power(ios->power_mode, ios->vdd);
@@ -1254,7 +1274,8 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 	case MMC_POWER_OFF:
 	default:
-		gpio_direction_output(S3C2410_GPE(5), 0);
+		if (!host->pdev->dev.of_node)
+			gpio_direction_output(S3C2410_GPE(5), 0);
 
 		if (host->is2440)
 			mci_con |= S3C2440_SDICON_SDRESET;
@@ -1544,21 +1565,12 @@ static inline void s3cmci_debugfs_remove(struct s3cmci_host *host) { }
 
 #endif /* CONFIG_DEBUG_FS */
 
-static int s3cmci_probe(struct platform_device *pdev)
+static int s3cmci_probe_pdata(struct s3cmci_host *host)
 {
-	struct s3cmci_host *host;
-	struct mmc_host	*mmc;
-	int ret;
-	int is2440;
-	int i;
+	struct platform_device *pdev = host->pdev;
+	int i, ret;
 
-	is2440 = platform_get_device_id(pdev)->driver_data;
-
-	mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
-	if (!mmc) {
-		ret = -ENOMEM;
-		goto probe_out;
-	}
+	host->is2440 = platform_get_device_id(pdev)->driver_data;
 
 	for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) {
 		ret = gpio_request(i, dev_name(&pdev->dev));
@@ -1568,14 +1580,90 @@ static int s3cmci_probe(struct platform_device *pdev)
 			for (i--; i >= S3C2410_GPE(5); i--)
 				gpio_free(i);
 
-			goto probe_free_host;
+			return ret;
 		}
 	}
 
+	return 0;
+}
+
+static int s3cmci_probe_dt(struct s3cmci_host *host)
+{
+	struct platform_device *pdev = host->pdev;
+	struct s3c24xx_mci_pdata *pdata;
+	const struct s3cmci_drv_data *drvdata;
+	struct mmc_host *mmc = host->mmc;
+	int gpio, ret;
+
+	drvdata = of_device_get_match_data(&pdev->dev);
+	if (!drvdata)
+		return -ENODEV;
+
+	host->is2440 = drvdata->is2440;
+
+	ret = mmc_of_parse(mmc);
+	if (ret)
+		return ret;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	pdata->ocr_avail = mmc->ocr_avail;
+
+	if (mmc->caps2 & MMC_CAP2_NO_WRITE_PROTECT)
+		pdata->no_wprotect = 1;
+
+	if (mmc->caps & MMC_CAP_NEEDS_POLL)
+		pdata->no_detect = 1;
+
+	if (mmc->caps2 & MMC_CAP2_RO_ACTIVE_HIGH)
+		pdata->wprotect_invert = 1;
+
+	if (mmc->caps2 & MMC_CAP2_CD_ACTIVE_HIGH)
+		pdata->detect_invert = 1;
+
+	gpio = of_get_named_gpio(pdev->dev.of_node, "cd-gpios", 0);
+	if (gpio_is_valid(gpio)) {
+		pdata->gpio_detect = gpio;
+		gpio_free(gpio);
+	}
+
+	gpio = of_get_named_gpio(pdev->dev.of_node, "wp-gpios", 0);
+	if (gpio_is_valid(gpio)) {
+		pdata->gpio_wprotect = gpio;
+		gpio_free(gpio);
+	}
+
+	pdev->dev.platform_data = pdata;
+
+	return 0;
+}
+
+static int s3cmci_probe(struct platform_device *pdev)
+{
+	struct s3cmci_host *host;
+	struct mmc_host	*mmc;
+	int ret;
+	int i;
+
+	mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
+	if (!mmc) {
+		ret = -ENOMEM;
+		goto probe_out;
+	}
+
 	host = mmc_priv(mmc);
 	host->mmc 	= mmc;
 	host->pdev	= pdev;
-	host->is2440	= is2440;
+
+	if (pdev->dev.of_node)
+		ret = s3cmci_probe_dt(host);
+	else
+		ret = s3cmci_probe_pdata(host);
+
+	if (ret)
+		goto probe_free_host;
 
 	host->pdata = pdev->dev.platform_data;
 	if (!host->pdata) {
@@ -1586,7 +1674,7 @@ static int s3cmci_probe(struct platform_device *pdev)
 	spin_lock_init(&host->complete_lock);
 	tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host);
 
-	if (is2440) {
+	if (host->is2440) {
 		host->sdiimsk	= S3C2440_SDIIMSK;
 		host->sdidata	= S3C2440_SDIDATA;
 		host->clk_div	= 1;
@@ -1789,8 +1877,9 @@ static int s3cmci_probe(struct platform_device *pdev)
 	release_mem_region(host->mem->start, resource_size(host->mem));
 
  probe_free_gpio:
-	for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
-		gpio_free(i);
+	if (!pdev->dev.of_node)
+		for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
+			gpio_free(i);
 
  probe_free_host:
 	mmc_free_host(mmc);
@@ -1837,9 +1926,9 @@ static int s3cmci_remove(struct platform_device *pdev)
 	if (!pd->no_detect)
 		gpio_free(pd->gpio_detect);
 
-	for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
-		gpio_free(i);
-
+	if (!pdev->dev.of_node)
+		for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
+			gpio_free(i);
 
 	iounmap(host->base);
 	release_mem_region(host->mem->start, resource_size(host->mem));
@@ -1848,6 +1937,23 @@ static int s3cmci_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id s3cmci_dt_match[] = {
+	{
+		.compatible = "samsung,s3c2410-sdi",
+		.data = &s3c2410_s3cmci_drv_data,
+	},
+	{
+		.compatible = "samsung,s3c2412-sdi",
+		.data = &s3c2412_s3cmci_drv_data,
+	},
+	{
+		.compatible = "samsung,s3c2440-sdi",
+		.data = &s3c2440_s3cmci_drv_data,
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, sdhci_s3c_dt_match);
+
 static const struct platform_device_id s3cmci_driver_ids[] = {
 	{
 		.name	= "s3c2410-sdi",
@@ -1867,6 +1973,7 @@ static int s3cmci_remove(struct platform_device *pdev)
 static struct platform_driver s3cmci_driver = {
 	.driver	= {
 		.name	= "s3c-sdi",
+		.of_match_table = s3cmci_dt_match,
 	},
 	.id_table	= s3cmci_driver_ids,
 	.probe		= s3cmci_probe,
-- 
1.9.1

Re: [PATCH 1/2] dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller

[Jaehoon Chung]

On 12/02/2016 09:14 AM, Sergio Prado wrote:
> Adds the device tree bindings description for Samsung S3C24XX
> MMC/SD/SDIO controller, used as a connectivity interface with external
> MMC, SD and SDIO storage mediums.
> 
> Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
> ---
>  .../devicetree/bindings/mmc/samsung,s3cmci.txt     | 38 ++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
> 
> diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
> new file mode 100644
> index 000000000000..3f044076e69a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
> @@ -0,0 +1,38 @@
> +* Samsung's S3C24XX MMC/SD/SDIO controller device tree bindings
> +
> +Samsung's S3C24XX MMC/SD/SDIO controller is used as a connectivity interface
> +with external MMC, SD and SDIO storage mediums.
> +
> +This file documents differences between the core mmc properties described by
> +mmc.txt and the properties used by the Samsung S3C24XX MMC/SD/SDIO controller
> +implementation.
> +
> +Required SoC Specific Properties:
> +- compatible: should be one of the following
> +  - "samsung,s3c2410-sdi": for controllers compatible with s3c2410
> +  - "samsung,s3c2412-sdi": for controllers compatible with s3c2412
> +  - "samsung,s3c2440-sdi": for controllers compatible with s3c2440
> +- clocks: Should reference the controller clock
> +- clock-names: Should contain "sdi"
> +
> +Required Board Specific Properties:
> +- pinctrl-0: Should specify pin control groups used for this controller.
> +- pinctrl-names: Should contain only one value - "default".

I'm not sure but i think this description doesn't need at here.

> +
> +Example:
> +	sdi: sdi@5a000000 {

I think it needs to use "mmc0: sdi@5a000000" instead of "sdi: sdi@5a000000"
Because mmc is more clear than sdi.

> +		compatible = "samsung,s3c2440-sdi";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&sdi_pins>;
> +		reg = <0x5a000000 0x100000>;
> +		interrupts = <0 0 21 3>;
> +		clocks = <&clocks PCLK_SDI>;
> +		clock-names = "sdi";
> +		bus-width = <4>;
> +		cd-gpios = <&gpg 8 GPIO_ACTIVE_LOW>;
> +		wp-gpios = <&gph 8 GPIO_ACTIVE_LOW>;
> +	};
> +
> +	Note: This example shows both SoC specific and board specific properties
> +	in a single device node. The properties can be actually be separated
> +	into SoC specific node and board specific node.
> 

[PATCH 1/2] dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller

[Jaehoon Chung]

On 12/02/2016 09:14 AM, Sergio Prado wrote:
> Adds the device tree bindings description for Samsung S3C24XX
> MMC/SD/SDIO controller, used as a connectivity interface with external
> MMC, SD and SDIO storage mediums.
> 
> Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
> ---
>  .../devicetree/bindings/mmc/samsung,s3cmci.txt     | 38 ++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
> 
> diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
> new file mode 100644
> index 000000000000..3f044076e69a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
> @@ -0,0 +1,38 @@
> +* Samsung's S3C24XX MMC/SD/SDIO controller device tree bindings
> +
> +Samsung's S3C24XX MMC/SD/SDIO controller is used as a connectivity interface
> +with external MMC, SD and SDIO storage mediums.
> +
> +This file documents differences between the core mmc properties described by
> +mmc.txt and the properties used by the Samsung S3C24XX MMC/SD/SDIO controller
> +implementation.
> +
> +Required SoC Specific Properties:
> +- compatible: should be one of the following
> +  - "samsung,s3c2410-sdi": for controllers compatible with s3c2410
> +  - "samsung,s3c2412-sdi": for controllers compatible with s3c2412
> +  - "samsung,s3c2440-sdi": for controllers compatible with s3c2440
> +- clocks: Should reference the controller clock
> +- clock-names: Should contain "sdi"
> +
> +Required Board Specific Properties:
> +- pinctrl-0: Should specify pin control groups used for this controller.
> +- pinctrl-names: Should contain only one value - "default".

I'm not sure but i think this description doesn't need at here.

> +
> +Example:
> +	sdi: sdi at 5a000000 {

I think it needs to use "mmc0: sdi at 5a000000" instead of "sdi: sdi at 5a000000"
Because mmc is more clear than sdi.

> +		compatible = "samsung,s3c2440-sdi";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&sdi_pins>;
> +		reg = <0x5a000000 0x100000>;
> +		interrupts = <0 0 21 3>;
> +		clocks = <&clocks PCLK_SDI>;
> +		clock-names = "sdi";
> +		bus-width = <4>;
> +		cd-gpios = <&gpg 8 GPIO_ACTIVE_LOW>;
> +		wp-gpios = <&gph 8 GPIO_ACTIVE_LOW>;
> +	};
> +
> +	Note: This example shows both SoC specific and board specific properties
> +	in a single device node. The properties can be actually be separated
> +	into SoC specific node and board specific node.
> 

Re: [PATCH 1/2] dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller

[Rob Herring]

On Fri, Dec 02, 2016 at 09:48:45AM +0900, Jaehoon Chung wrote:
> On 12/02/2016 09:14 AM, Sergio Prado wrote:
> > Adds the device tree bindings description for Samsung S3C24XX
> > MMC/SD/SDIO controller, used as a connectivity interface with external
> > MMC, SD and SDIO storage mediums.
> > 
> > Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
> > ---
> >  .../devicetree/bindings/mmc/samsung,s3cmci.txt     | 38 ++++++++++++++++++++++
> >  1 file changed, 38 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
> > new file mode 100644
> > index 000000000000..3f044076e69a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
> > @@ -0,0 +1,38 @@
> > +* Samsung's S3C24XX MMC/SD/SDIO controller device tree bindings
> > +
> > +Samsung's S3C24XX MMC/SD/SDIO controller is used as a connectivity interface
> > +with external MMC, SD and SDIO storage mediums.
> > +
> > +This file documents differences between the core mmc properties described by
> > +mmc.txt and the properties used by the Samsung S3C24XX MMC/SD/SDIO controller
> > +implementation.
> > +
> > +Required SoC Specific Properties:
> > +- compatible: should be one of the following
> > +  - "samsung,s3c2410-sdi": for controllers compatible with s3c2410
> > +  - "samsung,s3c2412-sdi": for controllers compatible with s3c2412
> > +  - "samsung,s3c2440-sdi": for controllers compatible with s3c2440
> > +- clocks: Should reference the controller clock
> > +- clock-names: Should contain "sdi"
> > +
> > +Required Board Specific Properties:
> > +- pinctrl-0: Should specify pin control groups used for this controller.
> > +- pinctrl-names: Should contain only one value - "default".
> 
> I'm not sure but i think this description doesn't need at here.
> 
> > +
> > +Example:
> > +	sdi: sdi@5a000000 {
> 
> I think it needs to use "mmc0: sdi@5a000000" instead of "sdi: sdi@5a000000"
> Because mmc is more clear than sdi.

The label doesn't matter much as it is not part of the dtb. The unit 
name should be 'mmc' though.

With that,

Acked-by: Rob Herring <robh@kernel.org>

[PATCH 1/2] dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller

[Rob Herring]

On Fri, Dec 02, 2016 at 09:48:45AM +0900, Jaehoon Chung wrote:
> On 12/02/2016 09:14 AM, Sergio Prado wrote:
> > Adds the device tree bindings description for Samsung S3C24XX
> > MMC/SD/SDIO controller, used as a connectivity interface with external
> > MMC, SD and SDIO storage mediums.
> > 
> > Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
> > ---
> >  .../devicetree/bindings/mmc/samsung,s3cmci.txt     | 38 ++++++++++++++++++++++
> >  1 file changed, 38 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
> > new file mode 100644
> > index 000000000000..3f044076e69a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
> > @@ -0,0 +1,38 @@
> > +* Samsung's S3C24XX MMC/SD/SDIO controller device tree bindings
> > +
> > +Samsung's S3C24XX MMC/SD/SDIO controller is used as a connectivity interface
> > +with external MMC, SD and SDIO storage mediums.
> > +
> > +This file documents differences between the core mmc properties described by
> > +mmc.txt and the properties used by the Samsung S3C24XX MMC/SD/SDIO controller
> > +implementation.
> > +
> > +Required SoC Specific Properties:
> > +- compatible: should be one of the following
> > +  - "samsung,s3c2410-sdi": for controllers compatible with s3c2410
> > +  - "samsung,s3c2412-sdi": for controllers compatible with s3c2412
> > +  - "samsung,s3c2440-sdi": for controllers compatible with s3c2440
> > +- clocks: Should reference the controller clock
> > +- clock-names: Should contain "sdi"
> > +
> > +Required Board Specific Properties:
> > +- pinctrl-0: Should specify pin control groups used for this controller.
> > +- pinctrl-names: Should contain only one value - "default".
> 
> I'm not sure but i think this description doesn't need at here.
> 
> > +
> > +Example:
> > +	sdi: sdi at 5a000000 {
> 
> I think it needs to use "mmc0: sdi at 5a000000" instead of "sdi: sdi at 5a000000"
> Because mmc is more clear than sdi.

The label doesn't matter much as it is not part of the dtb. The unit 
name should be 'mmc' though.

With that,

Acked-by: Rob Herring <robh@kernel.org>