From: Simon Horman <horms+renesas@verge.net.au> To: linux-renesas-soc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, Magnus Damm <magnus.damm@gmail.com>, Simon Horman <horms+renesas@verge.net.au> Subject: [PATCH renesas/devel 2/4] ARM: dts: r8a7791: Use R-Car Gen 2 fallback binding for msiof nodes Date: Tue, 20 Dec 2016 11:32:37 +0100 [thread overview] Message-ID: <1482229959-25584-3-git-send-email-horms+renesas@verge.net.au> (raw) In-Reply-To: <1482229959-25584-1-git-send-email-horms+renesas@verge.net.au> Use recently added R-Car Gen 2 fallback binding for msiof nodes in DT for r8a7791 SoC. This has no run-time effect for the current driver as the initialisation sequence is the same for the SoC-specific binding for r8a7791 and the fallback binding for R-Car Gen 2. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> --- arch/arm/boot/dts/r8a7791.dtsi | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 93f446db6a21..ba5748dc5171 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1518,7 +1518,8 @@ }; msiof0: spi@e6e20000 { - compatible = "renesas,msiof-r8a7791"; + compatible = "renesas,msiof-r8a7791", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e20000 0 0x0064>; interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; @@ -1532,7 +1533,8 @@ }; msiof1: spi@e6e10000 { - compatible = "renesas,msiof-r8a7791"; + compatible = "renesas,msiof-r8a7791", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e10000 0 0x0064>; interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>; @@ -1546,7 +1548,8 @@ }; msiof2: spi@e6e00000 { - compatible = "renesas,msiof-r8a7791"; + compatible = "renesas,msiof-r8a7791", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e00000 0 0x0064>; interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>; -- 2.7.0.rc3.207.g0ac5344
WARNING: multiple messages have this Message-ID (diff)
From: horms+renesas@verge.net.au (Simon Horman) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH renesas/devel 2/4] ARM: dts: r8a7791: Use R-Car Gen 2 fallback binding for msiof nodes Date: Tue, 20 Dec 2016 11:32:37 +0100 [thread overview] Message-ID: <1482229959-25584-3-git-send-email-horms+renesas@verge.net.au> (raw) In-Reply-To: <1482229959-25584-1-git-send-email-horms+renesas@verge.net.au> Use recently added R-Car Gen 2 fallback binding for msiof nodes in DT for r8a7791 SoC. This has no run-time effect for the current driver as the initialisation sequence is the same for the SoC-specific binding for r8a7791 and the fallback binding for R-Car Gen 2. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> --- arch/arm/boot/dts/r8a7791.dtsi | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 93f446db6a21..ba5748dc5171 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1518,7 +1518,8 @@ }; msiof0: spi at e6e20000 { - compatible = "renesas,msiof-r8a7791"; + compatible = "renesas,msiof-r8a7791", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e20000 0 0x0064>; interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; @@ -1532,7 +1533,8 @@ }; msiof1: spi at e6e10000 { - compatible = "renesas,msiof-r8a7791"; + compatible = "renesas,msiof-r8a7791", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e10000 0 0x0064>; interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>; @@ -1546,7 +1548,8 @@ }; msiof2: spi at e6e00000 { - compatible = "renesas,msiof-r8a7791"; + compatible = "renesas,msiof-r8a7791", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e00000 0 0x0064>; interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>; -- 2.7.0.rc3.207.g0ac5344
next prev parent reply other threads:[~2016-12-20 10:32 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-12-20 10:32 [PATCH renesas/devel 0/4] ARM, arm64: dts: Use R-Car fallback bindings for msiof nodes Simon Horman 2016-12-20 10:32 ` Simon Horman 2016-12-20 10:32 ` [PATCH renesas/devel 1/4] arm64: dts: r8a7796: Use R-Car Gen 3 fallback binding " Simon Horman 2016-12-20 10:32 ` Simon Horman 2016-12-20 10:42 ` Geert Uytterhoeven 2016-12-20 10:42 ` Geert Uytterhoeven 2016-12-20 10:44 ` Geert Uytterhoeven 2016-12-20 10:44 ` Geert Uytterhoeven 2016-12-20 11:04 ` Simon Horman 2016-12-20 11:04 ` Simon Horman 2016-12-20 10:32 ` Simon Horman [this message] 2016-12-20 10:32 ` [PATCH renesas/devel 2/4] ARM: dts: r8a7791: Use R-Car Gen 2 " Simon Horman 2016-12-20 10:43 ` Geert Uytterhoeven 2016-12-20 10:43 ` Geert Uytterhoeven 2016-12-20 10:32 ` [PATCH renesas/devel 3/4] ARM: dts: r8a7792: " Simon Horman 2016-12-20 10:32 ` Simon Horman 2016-12-20 10:44 ` Geert Uytterhoeven 2016-12-20 10:44 ` Geert Uytterhoeven 2016-12-20 10:32 ` [PATCH renesas/devel 4/4] ARM: dts: r8a7790: " Simon Horman 2016-12-20 10:32 ` Simon Horman 2016-12-20 10:45 ` Geert Uytterhoeven 2016-12-20 10:45 ` Geert Uytterhoeven 2016-12-20 11:03 ` [PATCH renesas/devel 0/4] ARM, arm64: dts: Use R-Car fallback bindings " Simon Horman 2016-12-20 11:03 ` Simon Horman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1482229959-25584-3-git-send-email-horms+renesas@verge.net.au \ --to=horms+renesas@verge.net.au \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=magnus.damm@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.