All of lore.kernel.org
 help / color / mirror / Atom feed
From: Himanshu Madhani <himanshu.madhani@cavium.com>
To: target-devel@vger.kernel.org, bart.vanassche@gmail.com,
	hch@infradead.org, nab@linux-iscsi.org
Cc: giridhar.malavali@cavium.com, linux-scsi@vger.kernel.org,
	himanshu.madhani@cavium.com
Subject: [PATCH 09/11] qla2xxx: Add Dual mode support in the driver
Date: Fri, 23 Dec 2016 20:23:37 -0800	[thread overview]
Message-ID: <1482553419-4117-10-git-send-email-himanshu.madhani@cavium.com> (raw)
In-Reply-To: <1482553419-4117-1-git-send-email-himanshu.madhani@cavium.com>

From: Quinn Tran <quinn.tran@cavium.com>

Add switch to allow both Initiator Mode & Target
mode to operate at the same time.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
---
 drivers/scsi/qla2xxx/qla_def.h     |   1 +
 drivers/scsi/qla2xxx/qla_init.c    |   3 +-
 drivers/scsi/qla2xxx/qla_isr.c     |  19 ++++++-
 drivers/scsi/qla2xxx/qla_target.c  | 113 +++++++++++++++++++++++++++++++------
 drivers/scsi/qla2xxx/qla_target.h  |   6 +-
 drivers/scsi/qla2xxx/tcm_qla2xxx.c |   2 +-
 6 files changed, 124 insertions(+), 20 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 2d3bc22..ce3b946 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -3312,6 +3312,7 @@ struct qla_hw_data {
 #define FLOGI_SP_SUPPORT        BIT_13
 
 	uint8_t		port_no;		/* Physical port of adapter */
+	uint8_t		exch_starvation;
 
 	/* Timeout timers. */
 	uint8_t 	loop_down_abort_time;    /* port down timer */
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index e0ca193..9da537c 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3997,7 +3997,8 @@ static void qla2xxx_nvram_wwn_from_ofw(scsi_qla_host_t *vha, nvram_t *nv)
 			 * Process any ATIO queue entries that came in
 			 * while we weren't online.
 			 */
-			if (qla_tgt_mode_enabled(vha)) {
+			if (qla_tgt_mode_enabled(vha) ||
+				qla_dual_mode_enabled(vha)) {
 				if (IS_QLA27XX(ha) || IS_QLA83XX(ha)) {
 					spin_lock_irqsave(&ha->tgt.atio_lock,
 					    flags);
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 36cc19f..2d47728 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1028,7 +1028,8 @@ static void qla_irq_affinity_notify(struct irq_affinity_notify *,
 
 		qla2x00_mark_all_devices_lost(vha, 1);
 
-		if (vha->vp_idx == 0 && !qla_ini_mode_enabled(vha))
+		if (vha->vp_idx == 0 &&
+			(qla_tgt_mode_enabled(vha) || qla_dual_mode_enabled(vha)))
 			set_bit(SCR_PENDING, &vha->dpc_flags);
 
 		set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
@@ -1643,6 +1644,7 @@ static void qla_irq_affinity_notify(struct irq_affinity_notify *,
 		    fcport->d_id.b.area, fcport->d_id.b.al_pa,
 		    le32_to_cpu(logio->io_parameter[0]));
 
+		vha->hw->exch_starvation = 0;
 		data[0] = MBS_COMMAND_COMPLETE;
 		if (sp->type != SRB_LOGIN_CMD)
 			goto logio_done;
@@ -1678,6 +1680,21 @@ static void qla_irq_affinity_notify(struct irq_affinity_notify *,
 	case LSC_SCODE_NPORT_USED:
 		data[0] = MBS_LOOP_ID_USED;
 		break;
+	case LSC_SCODE_NOXCB:
+		vha->hw->exch_starvation++;
+		if (vha->hw->exch_starvation > 5) {
+			ql_log(ql_log_warn, vha, 0xffff,
+			    "Exchange starvation. Reseting RISC\n");
+
+			vha->hw->exch_starvation = 0;
+
+			if (IS_P3P_TYPE(vha->hw))
+				set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags);
+			else
+				set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+			qla2xxx_wake_dpc(vha);
+		}
+		/* drop through */
 	default:
 		data[0] = MBS_COMMAND_ERROR;
 		break;
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index b697ba5..0fc6da5 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -55,8 +55,17 @@
 	"disabled on enabling target mode and then on disabling target mode "
 	"enabled back; "
 	"\"disabled\" - initiator mode will never be enabled; "
+	"\"dual\" - Initiator Modes will be enabled. Target Mode can be activated "
+	"when ready "
 	"\"enabled\" (default) - initiator mode will always stay enabled.");
 
+static int ql_dm_tgt_ex_pct = 50;
+module_param(ql_dm_tgt_ex_pct, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(ql_dm_tgt_ex_pct,
+	"For Dual Mode (qlini_mode=dual), this parameter determines "
+	"the percentage of exchanges/cmds FW will allocate resources "
+	"for Target mode.");
+
 int ql2x_ini_mode = QLA2XXX_INI_MODE_EXCLUSIVE;
 
 static int temp_sam_status = SAM_STAT_BUSY;
@@ -1302,7 +1311,8 @@ int qlt_stop_phase1(struct qla_tgt *tgt)
 	wait_event(tgt->waitQ, test_tgt_sess_count(tgt));
 
 	/* Big hammer */
-	if (!ha->flags.host_shutting_down && qla_tgt_mode_enabled(vha))
+	if (!ha->flags.host_shutting_down &&
+		(qla_tgt_mode_enabled(vha) || qla_dual_mode_enabled(vha)))
 		qlt_disable_vha(vha);
 
 	/* Wait for sessions to clear out (just in case) */
@@ -5270,6 +5280,35 @@ void qlt_async_event(uint16_t code, struct scsi_qla_host *vha,
 		    le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
 		break;
 
+	case MBA_REJECTED_FCP_CMD:
+		ql_dbg(ql_dbg_tgt_mgt, vha, 0xffff,
+			"qla_target(%d): Async event LS_REJECT occurred "
+			"(m[0]=%x, m[1]=%x, m[2]=%x, m[3]=%x)", vha->vp_idx,
+			le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]),
+			le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
+
+		if (le16_to_cpu(mailbox[3]) == 1) {
+			/* exchange starvation. */
+			vha->hw->exch_starvation++;
+			if (vha->hw->exch_starvation > 5) {
+				ql_log(ql_log_warn, vha, 0xffff,
+				    "Exchange starvation-. Reseting RISC\n");
+
+				vha->hw->exch_starvation = 0;
+
+				if (IS_P3P_TYPE(vha->hw))
+					set_bit(FCOE_CTX_RESET_NEEDED,
+					    &vha->dpc_flags);
+				else
+					set_bit(ISP_ABORT_NEEDED,
+					    &vha->dpc_flags);
+
+				qla2xxx_wake_dpc(vha);
+			}
+		}
+
+		break;
+
 	case MBA_PORT_UPDATE:
 		ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03d,
 		    "qla_target(%d): Port update async event %#x "
@@ -5279,10 +5318,11 @@ void qlt_async_event(uint16_t code, struct scsi_qla_host *vha,
 		    le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
 
 		login_code = le16_to_cpu(mailbox[2]);
-		if (login_code == 0x4)
+		if (login_code == 0x4) {
 			ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03e,
 			    "Async MB 2: Got PLOGI Complete\n");
-		else if (login_code == 0x7)
+			vha->hw->exch_starvation = 0;
+		} else if (login_code == 0x7)
 			ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03f,
 			    "Async MB 2: Port Logged Out\n");
 		break;
@@ -5833,7 +5873,10 @@ static void qlt_set_mode(struct scsi_qla_host *vha)
 		vha->host->active_mode = MODE_TARGET;
 		break;
 	case QLA2XXX_INI_MODE_ENABLED:
-		vha->host->active_mode |= MODE_TARGET;
+		vha->host->active_mode = MODE_UNKNOWN;
+		break;
+	case QLA2XXX_INI_MODE_DUAL:
+		vha->host->active_mode = MODE_DUAL;
 		break;
 	default:
 		break;
@@ -5856,8 +5899,8 @@ static void qlt_clear_mode(struct scsi_qla_host *vha)
 		vha->host->active_mode = MODE_INITIATOR;
 		break;
 	case QLA2XXX_INI_MODE_ENABLED:
-		vha->host->active_mode &= ~MODE_TARGET;
-		vha->host->active_mode |= MODE_INITIATOR;
+	case QLA2XXX_INI_MODE_DUAL:
+		vha->host->active_mode = MODE_INITIATOR;
 		break;
 	default:
 		break;
@@ -5952,9 +5995,6 @@ static void qlt_disable_vha(struct scsi_qla_host *vha)
 void
 qlt_vport_create(struct scsi_qla_host *vha, struct qla_hw_data *ha)
 {
-	if (!qla_tgt_mode_enabled(vha))
-		return;
-
 	vha->vha_tgt.qla_tgt = NULL;
 
 	mutex_init(&vha->vha_tgt.tgt_mutex);
@@ -6004,7 +6044,7 @@ static void qlt_disable_vha(struct scsi_qla_host *vha)
 	uint16_t cnt;
 	struct atio_from_isp *pkt = (struct atio_from_isp *)ha->tgt.atio_ring;
 
-	if (!qla_tgt_mode_enabled(vha))
+	if (qla_ini_mode_enabled(vha))
 		return;
 
 	for (cnt = 0; cnt < ha->tgt.atio_q_length; cnt++) {
@@ -6097,8 +6137,11 @@ static void qlt_disable_vha(struct scsi_qla_host *vha)
 qlt_24xx_config_nvram_stage1(struct scsi_qla_host *vha, struct nvram_24xx *nv)
 {
 	struct qla_hw_data *ha = vha->hw;
+	u32 tmp;
+	u16 t;
 
-	if (qla_tgt_mode_enabled(vha)) {
+	if (qla_tgt_mode_enabled(vha) ||
+		qla_dual_mode_enabled(vha)) {
 		if (!ha->tgt.saved_set) {
 			/* We save only once */
 			ha->tgt.saved_exchange_count = nv->exchange_count;
@@ -6111,7 +6154,24 @@ static void qlt_disable_vha(struct scsi_qla_host *vha)
 			ha->tgt.saved_set = 1;
 		}
 
-		nv->exchange_count = cpu_to_le16(0xFFFF);
+		if (qla_tgt_mode_enabled(vha)) {
+			nv->exchange_count = cpu_to_le16(0xFFFF);
+		} else {			/* dual */
+			if (ql_dm_tgt_ex_pct > 100) {
+				ql_dm_tgt_ex_pct = 50;
+			} else if (ql_dm_tgt_ex_pct == 100) {
+				/* leave some for FW */
+				ql_dm_tgt_ex_pct = 95;
+			}
+
+			tmp = ha->orig_fw_xcb_count * ql_dm_tgt_ex_pct;
+			tmp = tmp/100;
+			if (tmp > 0xffff)
+				tmp = 0xffff;
+
+			t = tmp & 0xffff;
+			nv->exchange_count = cpu_to_le16(t);
+		}
 
 		/* Enable target mode */
 		nv->firmware_options_1 |= cpu_to_le32(BIT_4);
@@ -6196,11 +6256,13 @@ static void qlt_disable_vha(struct scsi_qla_host *vha)
 qlt_81xx_config_nvram_stage1(struct scsi_qla_host *vha, struct nvram_81xx *nv)
 {
 	struct qla_hw_data *ha = vha->hw;
+	u32 tmp;
+	u16 t;
 
 	if (!QLA_TGT_MODE_ENABLED())
 		return;
 
-	if (qla_tgt_mode_enabled(vha)) {
+	if (qla_tgt_mode_enabled(vha) || qla_dual_mode_enabled(vha)) {
 		if (!ha->tgt.saved_set) {
 			/* We save only once */
 			ha->tgt.saved_exchange_count = nv->exchange_count;
@@ -6213,7 +6275,23 @@ static void qlt_disable_vha(struct scsi_qla_host *vha)
 			ha->tgt.saved_set = 1;
 		}
 
-		nv->exchange_count = cpu_to_le16(0xFFFF);
+		if (qla_tgt_mode_enabled(vha)) {
+			nv->exchange_count = cpu_to_le16(0xFFFF);
+		} else {			/* dual */
+			if (ql_dm_tgt_ex_pct > 100) {
+				ql_dm_tgt_ex_pct = 50;
+			} else if (ql_dm_tgt_ex_pct == 100) {
+				/* leave some for FW */
+				ql_dm_tgt_ex_pct = 95;
+			}
+
+			tmp = ha->orig_fw_xcb_count * ql_dm_tgt_ex_pct;
+			tmp = tmp/100;
+			if (tmp > 0xffff)
+				tmp = 0xffff;
+			t = tmp & 0xffff;
+			nv->exchange_count = cpu_to_le16(t);
+		}
 
 		/* Enable target mode */
 		nv->firmware_options_1 |= cpu_to_le32(BIT_4);
@@ -6323,10 +6401,11 @@ static void qlt_disable_vha(struct scsi_qla_host *vha)
 qlt_modify_vp_config(struct scsi_qla_host *vha,
 	struct vp_config_entry_24xx *vpmod)
 {
-	if (qla_tgt_mode_enabled(vha))
+	/* enable target mode.  Bit5 = 1 => disable */
+	if (qla_tgt_mode_enabled(vha) || qla_dual_mode_enabled(vha))
 		vpmod->options_idx1 &= ~BIT_5;
 
-	/* Disable ini mode, if requested. */
+	/* Disable ini mode, if requested.  bit4 = 1 => disable */
 	if (qla_tgt_mode_enabled(vha))
 		vpmod->options_idx1 &= ~BIT_4;
 }
@@ -6481,6 +6560,8 @@ static int __init qlt_parse_ini_mode(void)
 		ql2x_ini_mode = QLA2XXX_INI_MODE_DISABLED;
 	else if (strcasecmp(qlini_mode, QLA2XXX_INI_MODE_STR_ENABLED) == 0)
 		ql2x_ini_mode = QLA2XXX_INI_MODE_ENABLED;
+	else if (strcasecmp(qlini_mode, QLA2XXX_INI_MODE_STR_DUAL) == 0)
+		ql2x_ini_mode = QLA2XXX_INI_MODE_DUAL;
 	else
 		return false;
 
diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h
index 42719ca..5ebd7fb 100644
--- a/drivers/scsi/qla2xxx/qla_target.h
+++ b/drivers/scsi/qla2xxx/qla_target.h
@@ -45,10 +45,12 @@
 #define QLA2XXX_INI_MODE_STR_EXCLUSIVE	"exclusive"
 #define QLA2XXX_INI_MODE_STR_DISABLED	"disabled"
 #define QLA2XXX_INI_MODE_STR_ENABLED	"enabled"
+#define QLA2XXX_INI_MODE_STR_DUAL		"dual"
 
 #define QLA2XXX_INI_MODE_EXCLUSIVE	0
 #define QLA2XXX_INI_MODE_DISABLED	1
 #define QLA2XXX_INI_MODE_ENABLED	2
+#define QLA2XXX_INI_MODE_DUAL	3
 
 #define QLA2XXX_COMMAND_COUNT_INIT	250
 #define QLA2XXX_IMMED_NOTIFY_COUNT_INIT 250
@@ -1051,7 +1053,9 @@ extern int qlt_lport_register(void *, u64, u64, u64,
  * This macro is used during early initializations when host->active_mode
  * is not set. Right now, ha value is ignored.
  */
-#define QLA_TGT_MODE_ENABLED() (ql2x_ini_mode != QLA2XXX_INI_MODE_ENABLED)
+#define QLA_TGT_MODE_ENABLED() \
+	((ql2x_ini_mode != QLA2XXX_INI_MODE_ENABLED) || \
+	 (ql2x_ini_mode == QLA2XXX_INI_MODE_DUAL))
 extern int ql2x_ini_mode;
 
 static inline bool qla_tgt_mode_enabled(struct scsi_qla_host *ha)
diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
index d40f418..8880f13 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
@@ -1744,7 +1744,7 @@ static int tcm_qla2xxx_lport_register_npiv_cb(struct scsi_qla_host *base_vha,
 			(struct tcm_qla2xxx_lport *)base_vha->vha_tgt.target_lport_ptr;
 	struct fc_vport_identifiers vport_id;
 
-	if (!qla_tgt_mode_enabled(base_vha)) {
+	if (qla_ini_mode_enabled(base_vha)) {
 		pr_err("qla2xxx base_vha not enabled for target mode\n");
 		return -EPERM;
 	}
-- 
1.8.3.1


  parent reply	other threads:[~2016-12-24  4:24 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-24  4:23 [PATCH 00/11] qla2xxx: Feature updates for target Himanshu Madhani
2016-12-24  4:23 ` [PATCH 01/11] qla2xxx: Remove direct access of scsi_status field in se_cmd Himanshu Madhani
2016-12-24  4:23 ` [PATCH 02/11] qla2xxx: Cleanup TMF code translation from qla_target Himanshu Madhani
2017-01-11 20:05   ` Bart Van Assche
2017-01-11 20:43     ` Madhani, Himanshu
2017-01-11 21:08   ` Bart Van Assche
2017-01-11 23:01     ` Madhani, Himanshu
2016-12-24  4:23 ` [PATCH 03/11] qla2xxx: Make trace flags more readable Himanshu Madhani
2017-01-09 13:11   ` Christoph Hellwig
2017-01-09 18:36     ` Madhani, Himanshu
2017-01-11 20:47   ` Bart Van Assche
2017-01-11 20:54     ` Madhani, Himanshu
2016-12-24  4:23 ` [PATCH 04/11] qla2xxx: Cleanup SRR code Himanshu Madhani
2017-01-09 13:13   ` Christoph Hellwig
2017-01-10 17:55     ` Madhani, Himanshu
2016-12-24  4:23 ` [PATCH 05/11] qla2xxx: Fix wrong argument in sp done callback Himanshu Madhani
2017-01-09 13:17   ` Christoph Hellwig
2017-01-09 18:05     ` Madhani, Himanshu
2016-12-24  4:23 ` [PATCH 06/11] qla2xxx: Use d_id instead of s_id for more clarity Himanshu Madhani
2017-01-09 13:17   ` Christoph Hellwig
2016-12-24  4:23 ` [PATCH 07/11] qla2xxx: Track I-T nexus as single fc_port struct Himanshu Madhani
2017-01-09 13:28   ` Christoph Hellwig
2016-12-24  4:23 ` [PATCH 08/11] qla2xxx: Add framework for Async fabric discovery Himanshu Madhani
2017-01-11 20:08   ` Bart Van Assche
2017-01-13 17:50     ` Madhani, Himanshu
2016-12-24  4:23 ` Himanshu Madhani [this message]
2017-01-11 19:51   ` [PATCH 09/11] qla2xxx: Add Dual mode support in the driver Bart Van Assche
2017-01-13 22:13     ` Madhani, Himanshu
2016-12-24  4:23 ` [PATCH 10/11] qla2xxx: Remove unused reverse_ini_mode Himanshu Madhani
2016-12-24  4:23 ` [PATCH 11/11] qla2xxx: Improve RSCN handling in driver Himanshu Madhani
2017-01-11 21:05   ` Bart Van Assche

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1482553419-4117-10-git-send-email-himanshu.madhani@cavium.com \
    --to=himanshu.madhani@cavium.com \
    --cc=bart.vanassche@gmail.com \
    --cc=giridhar.malavali@cavium.com \
    --cc=hch@infradead.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=nab@linux-iscsi.org \
    --cc=target-devel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.