From: Bai Ping <ping.bai@nxp.com>
To: shawnguo@kernel.org, mturquette@baylibre.com,
sboyd@codeaurora.org, robh+dt@kernel.org, mark.rutland@arm.com,
linus.walleij@linaro.org
Cc: devicetree@vger.kernel.org, kernel@pengutronix.de,
daniel.lezcano@linaro.org, linux-gpio@vger.kernel.org,
p.zabel@pengutronix.de, jacky.baip@gmail.com,
fabio.estevam@nxp.com, tglx@linutronix.de,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 05/12] Document: dt: binding: imx: update pinctrl doc for imx6sll
Date: Tue, 27 Dec 2016 17:47:43 +0800 [thread overview]
Message-ID: <1482832070-22668-6-git-send-email-ping.bai@nxp.com> (raw)
In-Reply-To: <1482832070-22668-1-git-send-email-ping.bai@nxp.com>
Add pinctrl binding doc update for imx6sll.
Signed-off-by: Bai Ping <ping.bai@nxp.com>
---
.../bindings/pinctrl/fsl,imx6sll-pinctrl.txt | 37 ++++++++++++++++++++++
1 file changed, 37 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
new file mode 100644
index 0000000..9561c1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
@@ -0,0 +1,37 @@
+* Freescale i.MX6 SLL IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6sll-iomuxc"
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+ setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
+ input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+ imx6sll-pinfunc.h under device tree source folder. The last integer CONFIG is
+ the pad setting value like pull-up on this pin. Please refer to i.MX6SLL
+ Reference Manual for detailed CONFIG settings.
+
+CONFIG bits definition:
+PAD_CTL_LVE (1 << 22)
+PAD_CTL_HYS (1 << 16)
+PAD_CTL_PUS_100K_DOWN (0 << 14)
+PAD_CTL_PUS_47K_UP (1 << 14)
+PAD_CTL_PUS_100K_UP (2 << 14)
+PAD_CTL_PUS_22K_UP (3 << 14)
+PAD_CTL_PUE (1 << 13)
+PAD_CTL_PKE (1 << 12)
+PAD_CTL_ODE (1 << 11)
+PAD_CTL_SPEED_LOW (0 << 6)
+PAD_CTL_SPEED_MED (1 << 6)
+PAD_CTL_SPEED_HIGH (3 << 6)
+PAD_CTL_DSE_DISABLE (0 << 3)
+PAD_CTL_DSE_260ohm (1 << 3)
+PAD_CTL_DSE_130ohm (2 << 3)
+PAD_CTL_DSE_87ohm (3 << 3)
+PAD_CTL_DSE_65ohm (4 << 3)
+PAD_CTL_DSE_52ohm (5 << 3)
+PAD_CTL_DSE_43ohm (6 << 3)
+PAD_CTL_DSE_37ohm (7 << 3)
+PAD_CTL_SRE_FAST (1 << 0)
+PAD_CTL_SRE_SLOW (0 << 0)
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Bai Ping <ping.bai@nxp.com>
To: <shawnguo@kernel.org>, <mturquette@baylibre.com>,
<sboyd@codeaurora.org>, <robh+dt@kernel.org>,
<mark.rutland@arm.com>, <linus.walleij@linaro.org>
Cc: <kernel@pengutronix.de>, <fabio.estevam@nxp.com>,
<daniel.lezcano@linaro.org>, <tglx@linutronix.de>,
<p.zabel@pengutronix.de>, <linux-clk@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-gpio@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <jacky.baip@gmail.com>
Subject: [PATCH v2 05/12] Document: dt: binding: imx: update pinctrl doc for imx6sll
Date: Tue, 27 Dec 2016 17:47:43 +0800 [thread overview]
Message-ID: <1482832070-22668-6-git-send-email-ping.bai@nxp.com> (raw)
In-Reply-To: <1482832070-22668-1-git-send-email-ping.bai@nxp.com>
Add pinctrl binding doc update for imx6sll.
Signed-off-by: Bai Ping <ping.bai@nxp.com>
---
.../bindings/pinctrl/fsl,imx6sll-pinctrl.txt | 37 ++++++++++++++++++++++
1 file changed, 37 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
new file mode 100644
index 0000000..9561c1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
@@ -0,0 +1,37 @@
+* Freescale i.MX6 SLL IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6sll-iomuxc"
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+ setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
+ input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+ imx6sll-pinfunc.h under device tree source folder. The last integer CONFIG is
+ the pad setting value like pull-up on this pin. Please refer to i.MX6SLL
+ Reference Manual for detailed CONFIG settings.
+
+CONFIG bits definition:
+PAD_CTL_LVE (1 << 22)
+PAD_CTL_HYS (1 << 16)
+PAD_CTL_PUS_100K_DOWN (0 << 14)
+PAD_CTL_PUS_47K_UP (1 << 14)
+PAD_CTL_PUS_100K_UP (2 << 14)
+PAD_CTL_PUS_22K_UP (3 << 14)
+PAD_CTL_PUE (1 << 13)
+PAD_CTL_PKE (1 << 12)
+PAD_CTL_ODE (1 << 11)
+PAD_CTL_SPEED_LOW (0 << 6)
+PAD_CTL_SPEED_MED (1 << 6)
+PAD_CTL_SPEED_HIGH (3 << 6)
+PAD_CTL_DSE_DISABLE (0 << 3)
+PAD_CTL_DSE_260ohm (1 << 3)
+PAD_CTL_DSE_130ohm (2 << 3)
+PAD_CTL_DSE_87ohm (3 << 3)
+PAD_CTL_DSE_65ohm (4 << 3)
+PAD_CTL_DSE_52ohm (5 << 3)
+PAD_CTL_DSE_43ohm (6 << 3)
+PAD_CTL_DSE_37ohm (7 << 3)
+PAD_CTL_SRE_FAST (1 << 0)
+PAD_CTL_SRE_SLOW (0 << 0)
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: ping.bai@nxp.com (Bai Ping)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 05/12] Document: dt: binding: imx: update pinctrl doc for imx6sll
Date: Tue, 27 Dec 2016 17:47:43 +0800 [thread overview]
Message-ID: <1482832070-22668-6-git-send-email-ping.bai@nxp.com> (raw)
In-Reply-To: <1482832070-22668-1-git-send-email-ping.bai@nxp.com>
Add pinctrl binding doc update for imx6sll.
Signed-off-by: Bai Ping <ping.bai@nxp.com>
---
.../bindings/pinctrl/fsl,imx6sll-pinctrl.txt | 37 ++++++++++++++++++++++
1 file changed, 37 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
new file mode 100644
index 0000000..9561c1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
@@ -0,0 +1,37 @@
+* Freescale i.MX6 SLL IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6sll-iomuxc"
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+ setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
+ input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+ imx6sll-pinfunc.h under device tree source folder. The last integer CONFIG is
+ the pad setting value like pull-up on this pin. Please refer to i.MX6SLL
+ Reference Manual for detailed CONFIG settings.
+
+CONFIG bits definition:
+PAD_CTL_LVE (1 << 22)
+PAD_CTL_HYS (1 << 16)
+PAD_CTL_PUS_100K_DOWN (0 << 14)
+PAD_CTL_PUS_47K_UP (1 << 14)
+PAD_CTL_PUS_100K_UP (2 << 14)
+PAD_CTL_PUS_22K_UP (3 << 14)
+PAD_CTL_PUE (1 << 13)
+PAD_CTL_PKE (1 << 12)
+PAD_CTL_ODE (1 << 11)
+PAD_CTL_SPEED_LOW (0 << 6)
+PAD_CTL_SPEED_MED (1 << 6)
+PAD_CTL_SPEED_HIGH (3 << 6)
+PAD_CTL_DSE_DISABLE (0 << 3)
+PAD_CTL_DSE_260ohm (1 << 3)
+PAD_CTL_DSE_130ohm (2 << 3)
+PAD_CTL_DSE_87ohm (3 << 3)
+PAD_CTL_DSE_65ohm (4 << 3)
+PAD_CTL_DSE_52ohm (5 << 3)
+PAD_CTL_DSE_43ohm (6 << 3)
+PAD_CTL_DSE_37ohm (7 << 3)
+PAD_CTL_SRE_FAST (1 << 0)
+PAD_CTL_SRE_SLOW (0 << 0)
--
1.9.1
next prev parent reply other threads:[~2016-12-27 9:47 UTC|newest]
Thread overview: 113+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-27 9:47 [PATCH v2 00/12] Add basic code support for imx6sll Bai Ping
2016-12-27 9:47 ` Bai Ping
2016-12-27 9:47 ` Bai Ping
2016-12-27 9:47 ` [PATCH v2 01/12] ARM: imx: Add basic msl " Bai Ping
2016-12-27 9:47 ` Bai Ping
2016-12-27 9:47 ` Bai Ping
2016-12-27 9:47 ` [PATCH v2 02/12] driver: clocksource: add gpt timer " Bai Ping
2016-12-27 9:47 ` Bai Ping
2016-12-27 9:47 ` Bai Ping
2017-01-09 10:30 ` Daniel Lezcano
2017-01-09 10:30 ` Daniel Lezcano
2017-01-09 10:30 ` Daniel Lezcano
2016-12-27 9:47 ` [PATCH v2 03/12] Document: dt: binding: imx: update clock doc " Bai Ping
2016-12-27 9:47 ` Bai Ping
2016-12-27 9:47 ` Bai Ping
2017-01-03 17:48 ` Rob Herring
2017-01-03 17:48 ` Rob Herring
2017-01-03 17:48 ` Rob Herring
2016-12-27 9:47 ` [PATCH v2 04/12] driver: clk: imx: Add clock driver " Bai Ping
2016-12-27 9:47 ` Bai Ping
2016-12-27 9:47 ` Bai Ping
[not found] ` <1482832070-22668-5-git-send-email-ping.bai-3arQi8VN3Tc@public.gmane.org>
2017-01-03 17:49 ` Rob Herring
2017-01-03 17:49 ` Rob Herring
2017-01-03 17:49 ` Rob Herring
2017-01-10 0:37 ` Stephen Boyd
2017-01-10 0:37 ` Stephen Boyd
2017-01-10 0:37 ` Stephen Boyd
[not found] ` <20170110003753.GM17126-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-01-10 3:18 ` Jacky Bai
2017-01-10 3:18 ` Jacky Bai
2017-01-10 3:18 ` Jacky Bai
2017-01-12 22:05 ` Stephen Boyd
2017-01-12 22:05 ` Stephen Boyd
2017-01-12 22:05 ` Stephen Boyd
2017-01-13 3:04 ` Jacky Bai
2017-01-13 3:04 ` Jacky Bai
2017-01-13 3:04 ` Jacky Bai
2017-01-21 1:00 ` Stephen Boyd
2017-01-21 1:00 ` Stephen Boyd
2017-01-21 1:00 ` Stephen Boyd
2017-01-22 2:14 ` Jacky Bai
2017-01-22 2:14 ` Jacky Bai
2017-01-22 2:14 ` Jacky Bai
2016-12-27 9:47 ` Bai Ping [this message]
2016-12-27 9:47 ` [PATCH v2 05/12] Document: dt: binding: imx: update pinctrl doc " Bai Ping
2016-12-27 9:47 ` Bai Ping
2016-12-27 12:59 ` Linus Walleij
2016-12-27 12:59 ` Linus Walleij
2017-01-09 2:32 ` Jacky Bai
2017-01-09 2:32 ` Jacky Bai
2017-01-09 2:32 ` Jacky Bai
[not found] ` <AM3PR04MB5304992095753B761E66A9A87640-f56W/S9L6NRDGcFijYBXZgfhPeD8jYilXA4E9RH9d+qIuWR1G4zioA@public.gmane.org>
2017-01-11 14:33 ` Linus Walleij
2017-01-11 14:33 ` Linus Walleij
2017-01-11 14:33 ` Linus Walleij
2017-01-12 2:57 ` Jacky Bai
2017-01-12 2:57 ` Jacky Bai
2017-01-12 2:57 ` Jacky Bai
2017-01-13 15:22 ` Linus Walleij
2017-01-13 15:22 ` Linus Walleij
2017-01-17 6:35 ` Jacky Bai
2017-01-17 6:35 ` Jacky Bai
2017-01-17 6:35 ` Jacky Bai
2017-01-18 12:24 ` Linus Walleij
2017-01-18 12:24 ` Linus Walleij
2017-01-18 12:24 ` Linus Walleij
2017-01-23 6:04 ` Shawn Guo
2017-01-23 6:04 ` Shawn Guo
2017-01-23 7:17 ` Jacky Bai
2017-01-23 7:17 ` Jacky Bai
2017-01-23 7:17 ` Jacky Bai
2017-01-26 14:05 ` Linus Walleij
2017-01-26 14:05 ` Linus Walleij
2017-02-16 7:51 ` Dong Aisheng
2017-02-16 7:51 ` Dong Aisheng
2017-02-16 7:51 ` Dong Aisheng
2017-02-24 9:02 ` Dong Aisheng
2017-02-24 9:02 ` Dong Aisheng
2017-02-24 9:02 ` Dong Aisheng
2017-03-14 13:54 ` Linus Walleij
2017-03-14 13:54 ` Linus Walleij
2017-03-15 14:05 ` Dong Aisheng
2017-03-15 14:05 ` Dong Aisheng
2017-03-15 14:05 ` Dong Aisheng
2016-12-27 9:47 ` [PATCH v2 06/12] driver: pinctrl: imx: Add pinctrl driver support " Bai Ping
2016-12-27 9:47 ` Bai Ping
2016-12-27 9:47 ` Bai Ping
2016-12-27 13:01 ` Linus Walleij
2016-12-27 13:01 ` Linus Walleij
2016-12-27 13:01 ` Linus Walleij
2017-01-03 1:00 ` Jacky Bai
2017-01-03 1:00 ` Jacky Bai
2017-01-03 1:00 ` Jacky Bai
2016-12-27 9:47 ` [PATCH v2 07/12] ARM: dts: imx: Add basic dtsi " Bai Ping
2016-12-27 9:47 ` Bai Ping
2016-12-27 9:47 ` [PATCH v2 08/12] ARM: dts: imx: Add imx6sll EVK board dts support Bai Ping
2016-12-27 9:47 ` Bai Ping
2016-12-27 9:47 ` Bai Ping
2016-12-27 9:47 ` [PATCH v2 09/12] ARM: debug: Add low level debug support for imx6sll Bai Ping
2016-12-27 9:47 ` Bai Ping
2016-12-27 9:47 ` Bai Ping
2016-12-27 9:47 ` [PATCH v2 10/12] ARM: imx: Add suspend/resume " Bai Ping
2016-12-27 9:47 ` Bai Ping
2016-12-27 9:47 ` Bai Ping
2016-12-27 9:47 ` [PATCH v2 11/12] ARM: imx: correct i.mx6sll dram io low power mode Bai Ping
2016-12-27 9:47 ` Bai Ping
2016-12-27 9:47 ` Bai Ping
2016-12-27 9:47 ` [PATCH v2 12/12] ARM: configs: enable imx6sll support in defconfig Bai Ping
2016-12-27 9:47 ` Bai Ping
2016-12-27 9:47 ` Bai Ping
2017-01-23 6:10 ` [PATCH v2 00/12] Add basic code support for imx6sll Shawn Guo
2017-01-23 6:10 ` Shawn Guo
2017-01-23 7:18 ` Jacky Bai
2017-01-23 7:18 ` Jacky Bai
2017-01-23 7:18 ` Jacky Bai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1482832070-22668-6-git-send-email-ping.bai@nxp.com \
--to=ping.bai@nxp.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=jacky.baip@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=shawnguo@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.