[U-Boot] [v3 01/30] arm: socfpga: arria10: add additional i2c nodes for Arria10

[U-Boot] [v3 01/30] arm: socfpga: arria10: add additional i2c nodes for Arria10

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

Add remaining 3 I2C base addresses for the Arria10.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
 arch/arm/mach-socfpga/include/mach/base_addr_a10.h |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-socfpga/include/mach/base_addr_a10.h b/arch/arm/mach-socfpga/include/mach/base_addr_a10.h
index a7056d4..902c321 100644
--- a/arch/arm/mach-socfpga/include/mach/base_addr_a10.h
+++ b/arch/arm/mach-socfpga/include/mach/base_addr_a10.h
@@ -29,6 +29,9 @@
 #define SOCFPGA_MPUL2_ADDRESS			0xfffff000
 #define SOCFPGA_I2C0_ADDRESS			0xffc02200
 #define SOCFPGA_I2C1_ADDRESS			0xffc02300
+#define SOCFPGA_I2C2_ADDRESS			0xffc02400
+#define SOCFPGA_I2C3_ADDRESS			0xffc02500
+#define SOCFPGA_I2C4_ADDRESS			0xffc02600
 
 #define SOCFPGA_ECC_OCRAM_ADDRESS		0xff8c3000
 #define SOCFPGA_UART0_ADDRESS			0xffc02000
-- 
1.7.7.4

[U-Boot] [v3 02/30] arm: socfpga: arria10: add sdram defines for Arria10

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

Add the structures for the SDRAM controller on Arria10.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
 arch/arm/mach-socfpga/include/mach/sdram_a10.h |  380 ++++++++++++++++++++++++
 1 files changed, 380 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-socfpga/include/mach/sdram_a10.h

diff --git a/arch/arm/mach-socfpga/include/mach/sdram_a10.h b/arch/arm/mach-socfpga/include/mach/sdram_a10.h
new file mode 100644
index 0000000..0403531
--- /dev/null
+++ b/arch/arm/mach-socfpga/include/mach/sdram_a10.h
@@ -0,0 +1,380 @@
+/*
+ * Copyright (C) 2015 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#ifndef	_SOCFPGA_SDRAM_A10_H_
+#define	_SOCFPGA_SDRAM_A10_H_
+
+#ifndef __ASSEMBLY__
+
+struct socfpga_ecc_hmc {
+	u32 ip_rev_id;
+	u32 _pad_0x4_0x7;
+	u32 ddrioctrl;
+	u32 ddrcalstat;
+	u32 mpr_0beat1;
+	u32 mpr_1beat1;
+	u32 mpr_2beat1;
+	u32 mpr_3beat1;
+	u32 mpr_4beat1;
+	u32 mpr_5beat1;
+	u32 mpr_6beat1;
+	u32 mpr_7beat1;
+	u32 mpr_8beat1;
+	u32 mpr_0beat2;
+	u32 mpr_1beat2;
+	u32 mpr_2beat2;
+	u32 mpr_3beat2;
+	u32 mpr_4beat2;
+	u32 mpr_5beat2;
+	u32 mpr_6beat2;
+	u32 mpr_7beat2;
+	u32 mpr_8beat2;
+	u32 _pad_0x58_0x5f[2];
+	u32 auto_precharge;
+	u32 _pad_0x64_0xff[39];
+	u32 eccctrl;
+	u32 eccctrl2;
+	u32 _pad_0x108_0x10f[2];
+	u32 errinten;
+	u32 errintens;
+	u32 errintenr;
+	u32 intmode;
+	u32 intstat;
+	u32 diaginttest;
+	u32 modstat;
+	u32 derraddra;
+	u32 serraddra;
+	u32 _pad_0x134_0x137;
+	u32 autowb_corraddr;
+	u32 serrcntreg;
+	u32 autowb_drop_cntreg;
+	u32 _pad_0x144_0x147;
+	u32 ecc_reg2wreccdatabus;
+	u32 ecc_rdeccdata2regbus;
+	u32 ecc_reg2rdeccdatabus;
+	u32 _pad_0x154_0x15f[3];
+	u32 ecc_diagon;
+	u32 ecc_decstat;
+	u32 _pad_0x168_0x16f[2];
+	u32 ecc_errgenaddr_0;
+	u32 ecc_errgenaddr_1;
+	u32 ecc_errgenaddr_2;
+	u32 ecc_errgenaddr_3;
+};
+
+struct socfpga_noc_ddr_scheduler {
+	u32 ddr_t_main_scheduler_id_coreid;
+	u32 ddr_t_main_scheduler_id_revisionid;
+	u32 ddr_t_main_scheduler_ddrconf;
+	u32 ddr_t_main_scheduler_ddrtiming;
+	u32 ddr_t_main_scheduler_ddrmode;
+	u32 ddr_t_main_scheduler_readlatency;
+	u32 _pad_0x20_0x34[8];
+	u32 ddr_t_main_scheduler_activate;
+	u32 ddr_t_main_scheduler_devtodev;
+};
+
+/*
+ * OCRAM firewall
+ */
+struct socfpga_noc_fw_ocram {
+	u32 enable;
+	u32 enable_set;
+	u32 enable_clear;
+	u32 region0;
+	u32 region1;
+	u32 region2;
+	u32 region3;
+	u32 region4;
+	u32 region5;
+};
+
+/* for master such as MPU and FPGA */
+struct socfpga_noc_fw_ddr_mpu_fpga2sdram {
+	u32 enable;
+	u32 enable_set;
+	u32 enable_clear;
+	u32 _pad_0xc_0xf;
+	u32 mpuregion0addr;
+	u32 mpuregion1addr;
+	u32 mpuregion2addr;
+	u32 mpuregion3addr;
+	u32 fpga2sdram0region0addr;
+	u32 fpga2sdram0region1addr;
+	u32 fpga2sdram0region2addr;
+	u32 fpga2sdram0region3addr;
+	u32 fpga2sdram1region0addr;
+	u32 fpga2sdram1region1addr;
+	u32 fpga2sdram1region2addr;
+	u32 fpga2sdram1region3addr;
+	u32 fpga2sdram2region0addr;
+	u32 fpga2sdram2region1addr;
+	u32 fpga2sdram2region2addr;
+	u32 fpga2sdram2region3addr;
+};
+
+/* for L3 master */
+struct socfpga_noc_fw_ddr_l3 {
+	u32 enable;
+	u32 enable_set;
+	u32 enable_clear;
+	u32 hpsregion0addr;
+	u32 hpsregion1addr;
+	u32 hpsregion2addr;
+	u32 hpsregion3addr;
+	u32 hpsregion4addr;
+	u32 hpsregion5addr;
+	u32 hpsregion6addr;
+	u32 hpsregion7addr;
+};
+
+struct socfpga_io48_mmr {
+	u32 dbgcfg0;
+	u32 dbgcfg1;
+	u32 dbgcfg2;
+	u32 dbgcfg3;
+	u32 dbgcfg4;
+	u32 dbgcfg5;
+	u32 dbgcfg6;
+	u32 reserve0;
+	u32 reserve1;
+	u32 reserve2;
+	u32 ctrlcfg0;
+	u32 ctrlcfg1;
+	u32 ctrlcfg2;
+	u32 ctrlcfg3;
+	u32 ctrlcfg4;
+	u32 ctrlcfg5;
+	u32 ctrlcfg6;
+	u32 ctrlcfg7;
+	u32 ctrlcfg8;
+	u32 ctrlcfg9;
+	u32 dramtiming0;
+	u32 dramodt0;
+	u32 dramodt1;
+	u32 sbcfg0;
+	u32 sbcfg1;
+	u32 sbcfg2;
+	u32 sbcfg3;
+	u32 sbcfg4;
+	u32 sbcfg5;
+	u32 sbcfg6;
+	u32 sbcfg7;
+	u32 caltiming0;
+	u32 caltiming1;
+	u32 caltiming2;
+	u32 caltiming3;
+	u32 caltiming4;
+	u32 caltiming5;
+	u32 caltiming6;
+	u32 caltiming7;
+	u32 caltiming8;
+	u32 caltiming9;
+	u32 caltiming10;
+	u32 dramaddrw;
+	u32 sideband0;
+	u32 sideband1;
+	u32 sideband2;
+	u32 sideband3;
+	u32 sideband4;
+	u32 sideband5;
+	u32 sideband6;
+	u32 sideband7;
+	u32 sideband8;
+	u32 sideband9;
+	u32 sideband10;
+	u32 sideband11;
+	u32 sideband12;
+	u32 sideband13;
+	u32 sideband14;
+	u32 sideband15;
+	u32 dramsts;
+	u32 dbgdone;
+	u32 dbgsignals;
+	u32 dbgreset;
+	u32 dbgmatch;
+	u32 counter0mask;
+	u32 counter1mask;
+	u32 counter0match;
+	u32 counter1match;
+	u32 niosreserve0;
+	u32 niosreserve1;
+	u32 niosreserve2;
+};
+#endif /*__ASSEMBLY__*/
+
+#define IO48_MMR_CTRLCFG0_DB2_BURST_LENGTH_MASK		0x1F000000
+#define IO48_MMR_CTRLCFG0_DB2_BURST_LENGTH_SHIFT	24
+#define IO48_MMR_CTRLCFG0_DB1_BURST_LENGTH_MASK		0x00F80000
+#define IO48_MMR_CTRLCFG0_DB1_BURST_LENGTH_SHIFT	19
+#define IO48_MMR_CTRLCFG0_DB0_BURST_LENGTH_MASK		0x0007C000
+#define IO48_MMR_CTRLCFG0_DB0_BURST_LENGTH_SHIFT	14
+#define IO48_MMR_CTRLCFG0_CTRL_BURST_LENGTH_MASK	0x00003E00
+#define IO48_MMR_CTRLCFG0_CTRL_BURST_LENGTH_SHIFT	9
+#define IO48_MMR_CTRLCFG0_AC_POS_MASK			0x00000180
+#define IO48_MMR_CTRLCFG0_AC_POS_SHIFT			7
+#define IO48_MMR_CTRLCFG0_DIMM_TYPE_MASK		0x00000070
+#define IO48_MMR_CTRLCFG0_DIM_TYPE_SHIFT		4
+#define IO48_MMR_CTRLCFG0_MEM_TYPE_MASK			0x0000000F
+#define IO48_MMR_CTRLCFG0_MEM_TYPE_SHIFT		0
+
+#define IO48_MMR_CTRLCFG1_DBC3_ENABLE_DM		(1 << 30)
+#define IO48_MMR_CTRLCFG1_DBC2_ENABLE_DM		(1 << 29)
+#define IO48_MMR_CTRLCFG1_DBC1_ENABLE_DM		(1 << 28)
+#define IO48_MMR_CTRLCFG1_DBC0_ENABLE_DM		(1 << 27)
+#define IO48_MMR_CTRLCFG1_CTRL_ENABLE_DM		(1 << 26)
+#define IO48_MMR_CTRLCFG1_DQSTRK_EN			(1 << 25)
+#define IO48_MMR_CTRLCFG1_STARVE_LIMIT_MASK		0x01F80000
+#define IO48_MMR_CTRLCFG1_STARVE_LIMIT_SHIFT		19
+#define IO48_MMR_CTRLCFG1_REORDER_READ			(1 << 18)
+#define IO48_MMR_CTRLCFG1_DBC3_REORDER_RDATA		(1 << 17)
+#define IO48_MMR_CTRLCFG1_DBC2_REORDER_RDATA		(1 << 16)
+#define IO48_MMR_CTRLCFG1_DBC1_REORDER_RDATA		(1 << 15)
+#define IO48_MMR_CTRLCFG1_DBC0_REORDER_RDATA		(1 << 14)
+#define IO48_MMR_CTRLCFG1_CTRL_REORDER_RDATA		(1 << 13)
+#define IO48_MMR_CTRLCFG1_REORDER_DATA			(1 << 12)
+#define IO48_MMR_CTRLCFG1_DBC3_ENABLE_ECC		(1 << 11)
+#define IO48_MMR_CTRLCFG1_DBC2_ENABLE_ECC		(1 << 10)
+#define IO48_MMR_CTRLCFG1_DBC1_ENABLE_ECC		(1 << 9)
+#define IO48_MMR_CTRLCFG1_DBC0_ENABLE_ECC		(1 << 8)
+#define IO48_MMR_CTRLCFG1_CTRL_ENABLE_ECC		(1 << 7)
+#define IO48_MMR_CTRLCFG1_ADDR_ORDER_MASK		0x00000060
+#define IO48_MMR_CTRLCFG1_ADDR_ORDER_SHIFT		5
+#define IO48_MMR_CTRLCFG1_DBC3_BURST_LENGTH_MASK	0x0000001F
+#define IO48_MMR_CTRLCFG1_DBC3_BURST_LENGTH_SHIFT	0
+
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_DIFF_BG_MASK		0x3F000000
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_DIFF_BG_SHIFT	24
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_DIFF_BANK_MASK	0x00FC0000
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_DIFF_BANK_SHIFT	18
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_MASK			0x0003F000
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_SHIFT		12
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_PCH_MASK			0x00000FC0
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_PCH_SHIFT		6
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_RDWR_MASK		0x0000003F
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_RDWR_SHIFT		0
+
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_WR_DIFF_CHIP_MASK		0x3F000000
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_WR_DIFF_CHIP_SHIFT	24
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_WR_MASK			0x00FC0000
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_WR_SHIFT			18
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_RD_DB_MASK		0x0003F000
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_RD_DB_SHIFT		12
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_RD_DC_MASK		0x00000FC0
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_RD_DC_SHIFT		6
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_RD_MASK			0x0000003F
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_RD_SHIFT			0
+
+#define IO48_MMR_CALTIMING2_CFG_WR_TO_WR_DIFF_CHIP_MASK		0x3F000000
+#define IO48_MMR_CALTIMING2_CFG_WR_TO_WR_DIFF_CHIP_SHIFT	24
+#define IO48_MMR_CALTIMING2_CFG_WR_TO_WR_MASK			0x00FC0000
+#define IO48_MMR_CALTIMING2_CFG_WR_TO_WR_SHIFT			18
+#define IO48_MMR_CALTIMING2_CFG_RD_TO_AP_VALID_MASK		0x0003F000
+#define IO48_MMR_CALTIMING2_CFG_RD_TO_AP_VALID_SHIFT		12
+#define IO48_MMR_CALTIMING2_CFG_RD_TO_PCH_MASK			0x00000FC0
+#define IO48_MMR_CALTIMING2_CFG_RD_TO_PCH_SHIFT			6
+#define IO48_MMR_CALTIMING2_CFG_RD_TO_WR_DIFF_BG_MASK		0x0000003F
+#define IO48_MMR_CALTIMING2_CFG_RD_TO_WR_DIFF_BG_SHIFT		0
+
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_PCH_MASK			0x3F000000
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_PCH_SHIFT			24
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_RD_DIFF_BG_MASK		0x00FC0000
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_RD_DIFF_BG_SHIFT		18
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_RD_DIFF_CHIP_MASK		0x0003F000
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_RD_DIFF_CHIP_SHIFT	12
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_RD_MASK			0x00000FC0
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_RD_SHIFT			6
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_WR_DIFF_BG_MASK		0x0000003F
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_WR_DIFF_BG_SHIFT		0
+
+#define IO48_MMR_CALTIMING4_CFG_PDN_TO_VALID_MASK		0xFC000000
+#define IO48_MMR_CALTIMING4_CFG_PDN_TO_VALID_SHIFT		26
+#define IO48_MMR_CALTIMING4_CFG_ARF_TO_VALID_MASK		0x03FC0000
+#define IO48_MMR_CALTIMING4_CFG_ARF_TO_VALID_SHIFT		18
+#define IO48_MMR_CALTIMING4_CFG_PCH_ALL_TO_VALID_MASK		0x0003F000
+#define IO48_MMR_CALTIMING4_CFG_PCH_ALL_TO_VALID_SHIFT		12
+#define IO48_MMR_CALTIMING4_CFG_PCH_TO_VALID_MASK		0x00000FC0
+#define IO48_MMR_CALTIMING4_CFG_PCH_TO_VALID_SHIFT		6
+#define IO48_MMR_CALTIMING4_CFG_WR_AP_TO_VALID_MASK		0x0000003F
+#define IO48_MMR_CALTIMING4_CFG_WR_AP_TO_VALID_SHIFT		0
+
+#define IO48_MMR_CALTIMING9_CFG_WR_4_ACT_TO_ACT_MASK		0x000000FF
+#define IO48_MMR_CALTIMING9_CFG_WR_4_ACT_TO_ACT_SHIFT		0
+
+#define IO48_MMR_DRAMADDRW_CFG_CS_ADDR_WIDTH_MASK		0x00070000
+#define IO48_MMR_DRAMADDRW_CFG_CS_ADDR_WIDTH_SHIFT		16
+#define IO48_MMR_DRAMADDRW_CFG_BANK_GROUP_ADDR_WIDTH_MASK	0x0000C000
+#define IO48_MMR_DRAMADDRW_CFG_BANK_GROUP_ADDR_WIDTH_SHIFT	14
+#define IO48_MMR_DRAMADDRW_CFG_BANK_ADDR_WIDTH_MASK		0x00003C00
+#define IO48_MMR_DRAMADDRW_CFG_BANK_ADDR_WIDTH_SHIFT		10
+#define IO48_MMR_DRAMADDRW_CFG_ROW_ADDR_WIDTH_MASK		0x000003E0
+#define IO48_MMR_DRAMADDRW_CFG_ROW_ADDR_WIDTH_SHIFT		5
+#define IO48_MMR_DRAMADDRW_CFG_COL_ADDR_WIDTH_MASK		0x0000001F
+#define IO48_MMR_DRAMADDRW_CFG_COL_ADDR_WIDTH_SHIFT		0
+
+#define ALT_ECC_HMC_OCP_DDRIOCTRL_IO_SIZE_MSK		0x00000003
+
+#define ALT_ECC_HMC_OCP_INTSTAT_SERRPENA_SET_MSK	0x00000001
+#define ALT_ECC_HMC_OCP_INTSTAT_DERRPENA_SET_MSK	0x00000002
+#define ALT_ECC_HMC_OCP_ERRINTEN_SERRINTEN_SET_MSK	0x00000001
+#define ALT_ECC_HMC_OCP_ERRINTEN_DERRINTEN_SET_MSK	0x00000002
+#define ALT_ECC_HMC_OCP_INTMOD_INTONCMP_SET_MSK		0x00010000
+#define ALT_ECC_HMC_OCP_ECCCTL_AWB_CNT_RST_SET_MSK	0x00010000
+#define ALT_ECC_HMC_OCP_ECCCTL_CNT_RST_SET_MSK		0x00000100
+#define ALT_ECC_HMC_OCP_ECCCTL_ECC_EN_SET_MSK		0x00000001
+#define ALT_ECC_HMC_OCP_ECCCTL2_RMW_EN_SET_MSK		0x00000100
+#define ALT_ECC_HMC_OCP_ECCCTL2_AWB_EN_SET_MSK		0x00000001
+
+#define ALT_ECC_HMC_OCP_SERRCNTREG_VALUE		8
+
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_ACTTOACT_LSB	0
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_RDTOMISS_LSB	6
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_WRTOMISS_LSB	12
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_BURSTLEN_LSB	18
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_RDTOWR_LSB	21
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_WRTORD_LSB	26
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_BWRATIO_LSB	31
+
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRMOD_AUTOPRECHARGE_LSB	0
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRMOD_BWRATIOEXTENDED_LSB	1
+
+#define ALT_NOC_MPU_DDR_T_SCHED_ACTIVATE_RRD_LSB	0
+#define ALT_NOC_MPU_DDR_T_SCHED_ACTIVATE_FAW_LSB	4
+#define ALT_NOC_MPU_DDR_T_SCHED_ACTIVATE_FAWBANK_LSB	10
+
+#define ALT_NOC_MPU_DDR_T_SCHED_DEVTODEV_BUSRDTORD_LSB	0
+#define ALT_NOC_MPU_DDR_T_SCHED_DEVTODEV_BUSRDTOWR_LSB	2
+#define ALT_NOC_MPU_DDR_T_SCHED_DEVTODEV_BUSWRTORD_LSB	4
+
+#define ALT_NOC_FW_DDR_END_ADDR_LSB	16
+#define ALT_NOC_FW_DDR_ADDR_MASK	0xFFFF
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG0EN_SET_MSK		0x00000001
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG1EN_SET_MSK		0x00000002
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG2EN_SET_MSK		0x00000004
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG3EN_SET_MSK		0x00000008
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG4EN_SET_MSK		0x00000010
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG5EN_SET_MSK		0x00000020
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG6EN_SET_MSK		0x00000040
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG7EN_SET_MSK		0x00000080
+#define ALT_NOC_FW_DDR_SCR_EN_MPUREG0EN_SET_MSK		0x00000001
+#define ALT_NOC_FW_DDR_SCR_EN_MPUREG1EN_SET_MSK		0x00000002
+#define ALT_NOC_FW_DDR_SCR_EN_MPUREG2EN_SET_MSK		0x00000004
+#define ALT_NOC_FW_DDR_SCR_EN_MPUREG3EN_SET_MSK		0x00000008
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR0REG0EN_SET_MSK	0x00000010
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR0REG1EN_SET_MSK	0x00000020
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR0REG2EN_SET_MSK	0x00000040
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR0REG3EN_SET_MSK	0x00000080
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR1REG0EN_SET_MSK	0x00000100
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR1REG1EN_SET_MSK	0x00000200
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR1REG2EN_SET_MSK	0x00000400
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR1REG3EN_SET_MSK	0x00000800
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR2REG0EN_SET_MSK	0x00001000
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR2REG1EN_SET_MSK	0x00002000
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR2REG2EN_SET_MSK	0x00004000
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR2REG3EN_SET_MSK	0x00008000
+
+#define ALT_IO48_DRAMTIME_MEM_READ_LATENCY_MASK		0x0000003F
+#endif /* _SOCFPGA_SDRAM_A10_H_ */
-- 
1.7.7.4

[U-Boot] [v3 03/30] arm: socfpga: arria10: add board files for the Arria10 SoCDK

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

Add minimal support for the Arria10 SoCDK.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
 board/altera/arria10-socdk/Kconfig   |   18 ++++++++++++++++++
 board/altera/arria10-socdk/Makefile  |    7 +++++++
 board/altera/arria10-socdk/socfpga.c |   24 ++++++++++++++++++++++++
 3 files changed, 49 insertions(+), 0 deletions(-)
 create mode 100644 board/altera/arria10-socdk/Kconfig
 create mode 100644 board/altera/arria10-socdk/Makefile
 create mode 100644 board/altera/arria10-socdk/socfpga.c

diff --git a/board/altera/arria10-socdk/Kconfig b/board/altera/arria10-socdk/Kconfig
new file mode 100644
index 0000000..b80cc6d
--- /dev/null
+++ b/board/altera/arria10-socdk/Kconfig
@@ -0,0 +1,18 @@
+if TARGET_SOCFPGA_ARRIA10
+
+config SYS_CPU
+	default "armv7"
+
+config SYS_BOARD
+	default "socfpga_arria10"
+
+config SYS_VENDOR
+	default "altera"
+
+config SYS_SOC
+	default "socfpga_arria10"
+
+config SYS_CONFIG_NAME
+	default "socfpga_arria10"
+
+endif
diff --git a/board/altera/arria10-socdk/Makefile b/board/altera/arria10-socdk/Makefile
new file mode 100644
index 0000000..1d885ce
--- /dev/null
+++ b/board/altera/arria10-socdk/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2015 Altera Corporation <www.altera.com>
+#
+# SPDX-License-Identifier:	GPL-2.0
+#
+
+obj-y	:= socfpga.o
diff --git a/board/altera/arria10-socdk/socfpga.c b/board/altera/arria10-socdk/socfpga.c
new file mode 100644
index 0000000..abedc22
--- /dev/null
+++ b/board/altera/arria10-socdk/socfpga.c
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2015 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void s_init(void)
+{
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+int board_init(void)
+{
+	/* Address of boot parameters for ATAG (if ATAG is used) */
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+	return 0;
+}
-- 
1.7.7.4

[U-Boot] [v3 04/30] arm: socfpga: arria10: add system manager defines

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

Add system manager defines for Arria10.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
 .../arm/mach-socfpga/include/mach/system_manager.h |  122 ++++++++++++++++++++
 1 files changed, 122 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-socfpga/include/mach/system_manager.h b/arch/arm/mach-socfpga/include/mach/system_manager.h
index c45edea..e688c50 100644
--- a/arch/arm/mach-socfpga/include/mach/system_manager.h
+++ b/arch/arm/mach-socfpga/include/mach/system_manager.h
@@ -15,6 +15,7 @@ void sysmgr_config_warmrstcfgio(int enable);
 void sysmgr_get_pinmux_table(const u8 **table, unsigned int *table_len);
 #endif
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 struct socfpga_system_manager {
 	/* System Manager Module */
 	u32	siliconid1;			/* 0x00 */
@@ -115,6 +116,77 @@ struct socfpga_system_manager {
 	u32	_pad_0x734;
 	u32	spim0usefpga;			/* 0x738 */
 };
+#else /* Arria10 System Manager */
+struct socfpga_system_manager {
+	u32  siliconid1;
+	u32  siliconid2;
+	u32  wddbg;
+	u32  bootinfo;
+	u32  mpu_ctrl_l2_ecc;
+	u32  _pad_0x14_0x1f[3];
+	u32  dma;
+	u32  dma_periph;
+	u32  sdmmcgrp_ctrl;
+	u32  sdmmc_l3master;
+	u32  nand_bootstrap;
+	u32  nand_l3master;
+	u32  usb0_l3master;
+	u32  usb1_l3master;
+	u32  emac_global;
+	u32  emac0;
+	u32  emac1;
+	u32  emac2;
+	u32  _pad_0x50_0x5f[4];
+	u32  fpgaintf_en_global;
+	u32  fpgaintf_en_0;
+	u32  fpgaintf_en_1;
+	u32  fpgaintf_en_2;
+	u32  fpgaintf_en_3;
+	u32  _pad_0x74_0x7f[3];
+	u32  noc_addr_remap_value;
+	u32  noc_addr_remap_set;
+	u32  noc_addr_remap_clear;
+	u32  _pad_0x8c_0x8f;
+	u32  ecc_intmask_value;
+	u32  ecc_intmask_set;
+	u32  ecc_intmask_clr;
+	u32  ecc_intstatus_serr;
+	u32  ecc_intstatus_derr;
+	u32  mpu_status_l2_ecc;
+	u32  mpu_clear_l2_ecc;
+	u32  mpu_status_l1_parity;
+	u32  mpu_clear_l1_parity;
+	u32  mpu_set_l1_parity;
+	u32  _pad_0xb8_0xbf[2];
+	u32  noc_timeout;
+	u32  noc_idlereq_set;
+	u32  noc_idlereq_clr;
+	u32  noc_idlereq_value;
+	u32  noc_idleack;
+	u32  noc_idlestatus;
+	u32  fpga2soc_ctrl;
+	u32  _pad_0xdc_0xff[9];
+	u32  tsmc_tsel_0;
+	u32  tsmc_tsel_1;
+	u32  tsmc_tsel_2;
+	u32  tsmc_tsel_3;
+	u32  _pad_0x110_0x200[60];
+	u32  romhw_ctrl;
+	u32  romcode_ctrl;
+	u32  romcode_cpu1startaddr;
+	u32  romcode_initswstate;
+	u32  romcode_initswlastld;
+	u32  _pad_0x214_0x217;
+	u32  warmram_enable;
+	u32  warmram_datastart;
+	u32  warmram_length;
+	u32  warmram_execution;
+	u32  warmram_crc;
+	u32  _pad_0x22c_0x22f;
+	u32  isw_handoff[8];
+	u32  romcode_bootromswstate[8];
+};
+#endif
 
 #define SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGPINMUX	(1 << 0)
 #define SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGIO	(1 << 1)
@@ -146,4 +218,54 @@ struct socfpga_system_manager {
 #define SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB			2
 #define SYSMGR_EMACGRP_CTRL_PHYSEL_MASK			0x3
 
+/* For dedicated IO configuration */
+/* Voltage select enums */
+#define VOLTAGE_SEL_3V		0x0
+#define VOLTAGE_SEL_1P8V	0x1
+#define VOLTAGE_SEL_2P5V	0x2
+
+/* Input buffer enable */
+#define INPUT_BUF_DISABLE	0
+#define INPUT_BUF_1P8V		1
+#define INPUT_BUF_2P5V3V	2
+
+/* Weak pull up enable */
+#define WK_PU_DISABLE		0
+#define WK_PU_ENABLE		1
+
+/* Pull up slew rate control */
+#define PU_SLW_RT_SLOW		0
+#define PU_SLW_RT_FAST		1
+#define PU_SLW_RT_DEFAULT	PU_SLW_RT_SLOW
+
+/* Pull down slew rate control */
+#define PD_SLW_RT_SLOW		0
+#define PD_SLW_RT_FAST		1
+#define PD_SLW_RT_DEFAULT	PD_SLW_RT_SLOW
+
+/* Drive strength control */
+#define PU_DRV_STRG_DEFAULT	0x10
+#define PD_DRV_STRG_DEFAULT	0x10
+
+/* bit position */
+#define PD_DRV_STRG_LSB		0
+#define PD_SLW_RT_LSB		5
+#define PU_DRV_STRG_LSB		8
+#define PU_SLW_RT_LSB		13
+#define WK_PU_LSB		16
+#define INPUT_BUF_LSB		17
+#define BIAS_TRIM_LSB		19
+#define VOLTAGE_SEL_LSB		0
+
+#define ALT_SYSMGR_NOC_H2F_SET_MSK	0x00000001
+#define ALT_SYSMGR_NOC_LWH2F_SET_MSK	0x00000010
+#define ALT_SYSMGR_NOC_F2H_SET_MSK	0x00000100
+#define ALT_SYSMGR_NOC_F2SDR0_SET_MSK	0x00010000
+#define ALT_SYSMGR_NOC_F2SDR1_SET_MSK	0x00100000
+#define ALT_SYSMGR_NOC_F2SDR2_SET_MSK	0x01000000
+#define ALT_SYSMGR_NOC_TMO_EN_SET_MSK	0x00000001
+
+#define ALT_SYSMGR_ECC_INTSTAT_SERR_OCRAM_SET_MSK	0x00000002
+#define ALT_SYSMGR_ECC_INTSTAT_DERR_OCRAM_SET_MSK	0x00000002
+
 #endif /* _SYSTEM_MANAGER_H_ */
-- 
1.7.7.4

[U-Boot] [v3 05/30] arm: socfpga: arria10: add misc functions for Arria10

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

Add arch_early_init_r function. The Arria10 has a firewall protection
around the SDRAM and OCRAM. These firewalls are to be disabled in order
for U-Boot to function.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
 arch/arm/mach-socfpga/misc.c |   51 ++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 51 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c
index dd6b53b..c1e5969 100644
--- a/arch/arm/mach-socfpga/misc.c
+++ b/arch/arm/mach-socfpga/misc.c
@@ -15,6 +15,7 @@
 #include <watchdog.h>
 #include <asm/arch/reset_manager.h>
 #include <asm/arch/scan_manager.h>
+#include <asm/arch/sdram_a10.h>
 #include <asm/arch/system_manager.h>
 #include <asm/arch/nic301.h>
 #include <asm/arch/scu.h>
@@ -30,8 +31,15 @@ static struct socfpga_system_manager *sysmgr_regs =
 	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
 static struct socfpga_reset_manager *reset_manager_base =
 	(struct socfpga_reset_manager *)SOCFPGA_RSTMGR_ADDRESS;
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 static struct nic301_registers *nic301_regs =
 	(struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS;
+#else
+static const struct socfpga_noc_fw_ocram *noc_fw_ocram_base =
+	(void *)SOCFPGA_SDR_FIREWALL_OCRAM_ADDRESS;
+static const struct socfpga_noc_fw_ddr_l3 *noc_fw_ddr_l3_base =
+	(void *)SOCFPGA_SDR_FIREWALL_L3_ADDRESS;
+#endif
 static struct scu_registers *scu_regs =
 	(struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS;
 
@@ -253,9 +261,14 @@ static int socfpga_fpga_id(const bool print_id)
 #if defined(CONFIG_DISPLAY_CPUINFO)
 int print_cpuinfo(void)
 {
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 	const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7;
 	puts("CPU:   Altera SoCFPGA Platform\n");
 	socfpga_fpga_id(1);
+#else
+	const u32 bsel = (readl(&sysmgr_regs->bootinfo) >> 12) & 0x7;
+	puts("CPU:   Altera SoCFPGA Arria 10\n");
+#endif
 	printf("BOOT:  %s\n", bsel_str[bsel].name);
 	return 0;
 }
@@ -338,6 +351,7 @@ int arch_cpu_init(void)
 	return 0;
 }
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 /*
  * Convert all NIC-301 AMBA slaves from secure to non-secure
  */
@@ -461,6 +475,43 @@ int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 	return 0;
 }
+#else
+/*
++ * This function initializes security policies to be consistent across
++ * all logic units in the Arria 10.
++ *
++ * The idea is to set all security policies to be normal, nonsecure
++ * for all units.
++ */
+static void initialize_security_policies(void)
+{
+	/* Put OCRAM in non-secure */
+	writel(0x003f0000, &noc_fw_ocram_base->region0);
+	writel(0x1, &noc_fw_ocram_base->enable);
+
+	/* Put DDR in non-secure */
+	writel(0xffff0000, &noc_fw_ddr_l3_base->hpsregion0addr);
+	writel(0x1, &noc_fw_ddr_l3_base->enable);
+}
+
+int arch_early_init_r(void)
+{
+	initialize_security_policies();
+
+	/* Configure the L2 controller to make SDRAM start at 0 */
+	writel(0x1, &pl310->pl310_addr_filter_start);
+
+	/* assert reset to all except L4WD0 and L4TIMER0 */
+	socfpga_per_reset_all();
+
+	/* configuring the clock based on handoff */
+	/* TODO: Add call to cm_basic_init() */
+
+	/* Add device descriptor to FPGA device table */
+	socfpga_fpga_add();
+	return 0;
+}
+#endif
 
 U_BOOT_CMD(
 	bridge, 2, 1, do_bridge,
-- 
1.7.7.4

[U-Boot] [v3 06/30] arm: socfpga: arria10: add socfpga_arria10_socdk config

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

Add config for the Arria10 SoC Development Kit.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Acked-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
 include/configs/socfpga_arria10_socdk.h |   94 +++++++++++++++++++++++++++++++
 1 files changed, 94 insertions(+), 0 deletions(-)
 create mode 100644 include/configs/socfpga_arria10_socdk.h

diff --git a/include/configs/socfpga_arria10_socdk.h b/include/configs/socfpga_arria10_socdk.h
new file mode 100644
index 0000000..577f60f
--- /dev/null
+++ b/include/configs/socfpga_arria10_socdk.h
@@ -0,0 +1,94 @@
+/*
+ *  Copyright (C) 2015 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#ifndef __CONFIG_SOCFGPA_ARRIA10_H__
+#define __CONFIG_SOCFGPA_ARRIA10_H__
+
+#include <asm/arch/base_addr_a10.h>
+/* U-Boot Commands */
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_DOS_PARTITION
+#define CONFIG_FAT_WRITE
+#define CONFIG_HW_WATCHDOG
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC
+#define CONFIG_CMD_GREPENV
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_PING
+
+/*
+ * Memory configurations
+ */
+#define PHYS_SDRAM_1_SIZE		0x2000000
+
+/* Booting Linux */
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTFILE		"zImage"
+#define CONFIG_BOOTARGS		"console=ttyS0," __stringify(CONFIG_BAUDRATE)
+#define CONFIG_BOOTCOMMAND      "run mmcload; run mmcboot"
+#define CONFIG_LOADADDR		0x01000000
+#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
+
+/*
+ * Display CPU and Board Info
+ */
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+
+/* Ethernet on SoC (EMAC) */
+#if defined(CONFIG_CMD_NET)
+
+/* PHY */
+#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_MICREL_KSZ9031
+
+#endif
+
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		0/* device 0 */
+#define CONFIG_ENV_OFFSET		512/* just after the MBR */
+
+/*
+ * arguments passed to the bootz command. The value of
+ * CONFIG_BOOTARGS goes into the environment value "bootargs".
+ * Do note the value will overide also the chosen node in FDT blob.
+ */
+#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE)
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"verify=n\0" \
+	"loadaddr= " __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+	"ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
+		"bootm ${loadaddr} - ${fdt_addr}\0" \
+	"bootimage=zImage\0" \
+	"fdt_addr=100\0" \
+	"fdtimage=socfpga.dtb\0" \
+		"fsloadcmd=ext2load\0" \
+	"bootm ${loadaddr} - ${fdt_addr}\0" \
+	"mmcroot=/dev/mmcblk0p2\0" \
+	"mmcboot=setenv bootargs " CONFIG_BOOTARGS \
+		" root=${mmcroot} rw rootwait;" \
+		"bootz ${loadaddr} - ${fdt_addr}\0" \
+	"mmcload=mmc rescan;" \
+		"load mmc 0:1 ${loadaddr} ${bootimage};" \
+		"load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
+	"qspiroot=/dev/mtdblock0\0" \
+	"qspirootfstype=jffs2\0" \
+	"qspiboot=setenv bootargs " CONFIG_BOOTARGS \
+		" root=${qspiroot} rw rootfstype=${qspirootfstype};"\
+		"bootm ${loadaddr} - ${fdt_addr}\0"
+
+/* The rest of the configuration is shared */
+#include <configs/socfpga_common.h>
+#endif	/* __CONFIG_H */
-- 
1.7.7.4

[U-Boot] [v3 07/30] arm: socfpga: arria10: add socfpga_arria10_defconfig

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

Add a defconfig file for Arria10, which does not include enabling SPL.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Acked-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
 configs/socfpga_arria10_defconfig |   16 ++++++++++++++++
 1 files changed, 16 insertions(+), 0 deletions(-)
 create mode 100644 configs/socfpga_arria10_defconfig

diff --git a/configs/socfpga_arria10_defconfig b/configs/socfpga_arria10_defconfig
new file mode 100644
index 0000000..422261b
--- /dev/null
+++ b/configs/socfpga_arria10_defconfig
@@ -0,0 +1,16 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SOCFPGA=y
+CONFIG_TARGET_SOCFPGA_ARRIA10=y
+CONFIG_DM_GPIO=y
+CONFIG_TARGET_SOCFPGA_ARRIA10_SOCDK=y
+CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria10_socdk"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_DWAPB_GPIO=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_SYS_NS16550=y
+CONFIG_CADENCE_QSPI=y
+CONFIG_DESIGNWARE_SPI=y
+CONFIG_DM_MMC=y
-- 
1.7.7.4

[U-Boot] [v3 08/30] arm: socfpga: arria10: add config option build for arria10

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
 arch/arm/Kconfig              |    4 ++--
 arch/arm/mach-socfpga/Kconfig |   10 ++++++++++
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0ed36cd..80c5992 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -561,9 +561,9 @@ config ARCH_SNAPDRAGON
 config ARCH_SOCFPGA
 	bool "Altera SOCFPGA family"
 	select CPU_V7
-	select SUPPORT_SPL
+	select SUPPORT_SPL if !TARGET_SOCFPGA_ARRIA10
 	select OF_CONTROL
-	select SPL_OF_CONTROL
+	select SPL_OF_CONTROL if !TARGET_SOCFPGA_ARRIA10
 	select DM
 	select DM_SPI_FLASH
 	select DM_SPI
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index 6991af8..d9a5178 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -31,6 +31,9 @@ config TARGET_SOCFPGA_ARRIA5
 	bool
 	select TARGET_SOCFPGA_GEN5
 
+config TARGET_SOCFPGA_ARRIA10
+	bool
+
 config TARGET_SOCFPGA_CYCLONE5
 	bool
 	select TARGET_SOCFPGA_GEN5
@@ -50,6 +53,10 @@ config TARGET_SOCFPGA_CYCLONE5_SOCDK
 	bool "Altera SOCFPGA SoCDK (Cyclone V)"
 	select TARGET_SOCFPGA_CYCLONE5
 
+config TARGET_SOCFPGA_ARRIA10_SOCDK
+	bool "Altera SOCFPGA SoCDK (Arria 10)"
+	select TARGET_SOCFPGA_ARRIA10
+
 config TARGET_SOCFPGA_DENX_MCVEVK
 	bool "DENX MCVEVK (Cyclone V)"
 	select TARGET_SOCFPGA_CYCLONE5
@@ -86,6 +93,7 @@ endchoice
 
 config SYS_BOARD
 	default "arria5-socdk" if TARGET_SOCFPGA_ARRIA5_SOCDK
+	default "arria10-socdk" if TARGET_SOCFPGA_ARRIA10_SOCDK
 	default "cyclone5-socdk" if TARGET_SOCFPGA_CYCLONE5_SOCDK
 	default "de0-nano-soc" if TARGET_SOCFPGA_TERASIC_DE0_NANO
 	default "de1-soc" if TARGET_SOCFPGA_TERASIC_DE1_SOC
@@ -98,6 +106,7 @@ config SYS_BOARD
 
 config SYS_VENDOR
 	default "altera" if TARGET_SOCFPGA_ARRIA5_SOCDK
+	default "altera" if TARGET_SOCFPGA_ARRIA10_SOCDK
 	default "altera" if TARGET_SOCFPGA_CYCLONE5_SOCDK
 	default "denx" if TARGET_SOCFPGA_DENX_MCVEVK
 	default "ebv" if TARGET_SOCFPGA_EBV_SOCRATES
@@ -111,6 +120,7 @@ config SYS_SOC
 
 config SYS_CONFIG_NAME
 	default "socfpga_arria5_socdk" if TARGET_SOCFPGA_ARRIA5_SOCDK
+	default "socfpga_arria10_socdk" if TARGET_SOCFPGA_ARRIA10_SOCDK
 	default "socfpga_cyclone5_socdk" if TARGET_SOCFPGA_CYCLONE5_SOCDK
 	default "socfpga_de0_nano_soc" if TARGET_SOCFPGA_TERASIC_DE0_NANO
 	default "socfpga_de1_soc" if TARGET_SOCFPGA_TERASIC_DE1_SOC
-- 
1.7.7.4

[U-Boot] [v3 09/30] arm: socfpga: add define for bootinfo bsel bit shift

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

On arria5/cyclone5 parts, the bsel bits are at shift 0, while for arria10,
the bsel bits are at shift 12. Add SYSMGR_BOOTINFO_BSEL_SHIFT define so that
the reading the bsel can generic.

Suggested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
 .../arm/mach-socfpga/include/mach/system_manager.h |    2 ++
 arch/arm/mach-socfpga/misc.c                       |    4 ++--
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-socfpga/include/mach/system_manager.h b/arch/arm/mach-socfpga/include/mach/system_manager.h
index e688c50..9ca889a 100644
--- a/arch/arm/mach-socfpga/include/mach/system_manager.h
+++ b/arch/arm/mach-socfpga/include/mach/system_manager.h
@@ -203,8 +203,10 @@ struct socfpga_system_manager {
 
 #if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 #define SYSMGR_SDMMC_SMPLSEL_SHIFT	3
+#define SYSMGR_BOOTINFO_BSEL_SHIFT	0
 #else
 #define SYSMGR_SDMMC_SMPLSEL_SHIFT	4
+#define SYSMGR_BOOTINFO_BSEL_SHIFT	12
 #endif
 
 #define SYSMGR_SDMMC_DRVSEL_SHIFT	0
diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c
index c1e5969..2645129 100644
--- a/arch/arm/mach-socfpga/misc.c
+++ b/arch/arm/mach-socfpga/misc.c
@@ -261,12 +261,12 @@ static int socfpga_fpga_id(const bool print_id)
 #if defined(CONFIG_DISPLAY_CPUINFO)
 int print_cpuinfo(void)
 {
+	const u32 bsel = (readl(&sysmgr_regs->bootinfo) >>
+			  SYSMGR_BOOTINFO_BSEL_SHIFT) & 0x7;
 #if defined(CONFIG_TARGET_SOCFPGA_GEN5)
-	const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7;
 	puts("CPU:   Altera SoCFPGA Platform\n");
 	socfpga_fpga_id(1);
 #else
-	const u32 bsel = (readl(&sysmgr_regs->bootinfo) >> 12) & 0x7;
 	puts("CPU:   Altera SoCFPGA Arria 10\n");
 #endif
 	printf("BOOT:  %s\n", bsel_str[bsel].name);
-- 
1.7.7.4

[U-Boot] [v3 10/30] arm: socfpga: arria10: add reset manager for Arria10

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

Add the defines for the reset manager and some basic reset functionality.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
 arch/arm/mach-socfpga/include/mach/reset_manager.h |   65 ++++++++++++++++++++
 arch/arm/mach-socfpga/reset_manager.c              |   24 +++++++-
 2 files changed, 88 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-socfpga/include/mach/reset_manager.h b/arch/arm/mach-socfpga/include/mach/reset_manager.h
index 2f070f2..6225118 100644
--- a/arch/arm/mach-socfpga/include/mach/reset_manager.h
+++ b/arch/arm/mach-socfpga/include/mach/reset_manager.h
@@ -15,6 +15,7 @@ void socfpga_bridges_reset(int enable);
 void socfpga_per_reset(u32 reset, int set);
 void socfpga_per_reset_all(void);
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 struct socfpga_reset_manager {
 	u32	status;
 	u32	ctrl;
@@ -28,6 +29,42 @@ struct socfpga_reset_manager {
 	u32	padding2[12];
 	u32	tstscratch;
 };
+#else
+struct socfpga_reset_manager {
+	u32	stat;
+	u32	ramstat;
+	u32	miscstat;
+	u32	ctrl;
+	u32	hdsken;
+	u32	hdskreq;
+	u32	hdskack;
+	u32	counts;
+	u32	mpu_mod_reset;
+	u32	per_mod_reset;	/* stated as per0_mod_reset in A10 datasheet */
+	u32	per2_mod_reset;	/* stated as per1_mod_reset in A10 datasheet */
+	u32	brg_mod_reset;
+	u32	misc_mod_reset;	/* stated as sys_mod_reset in A10 datasheet */
+	u32	coldmodrst;
+	u32	nrstmodrst;
+	u32	dbgmodrst;
+	u32	mpuwarmmask;
+	u32	per0warmmask;
+	u32	per1warmmask;
+	u32	brgwarmmask;
+	u32	syswarmmask;
+	u32	nrstwarmmask;
+	u32	l3warmmask;
+	u32	tststa;
+	u32	tstscratch;
+	u32	hdsktimeout;
+	u32	hmcintr;
+	u32	hmcintren;
+	u32	hmcintrens;
+	u32	hmcintrenr;
+	u32	hmcgpout;
+	u32	hmcgpin;
+};
+#endif
 
 #if defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
 #define RSTMGR_CTRL_SWWARMRSTREQ_LSB 2
@@ -55,6 +92,7 @@ struct socfpga_reset_manager {
 #define RSTMGR_BANK(_reset)			\
 	(((_reset) >> RSTMGR_BANK_OFFSET) & RSTMGR_BANK_MASK)
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 /*
  * SocFPGA Cyclone V/Arria V reset IDs, bank mapping is as follows:
  * 0 ... mpumodrst
@@ -75,6 +113,33 @@ struct socfpga_reset_manager {
 #define RSTMGR_SDMMC		RSTMGR_DEFINE(1, 22)
 #define RSTMGR_DMA		RSTMGR_DEFINE(1, 28)
 #define RSTMGR_SDR		RSTMGR_DEFINE(1, 29)
+#else
+/*
+ * SocFPGA Arria10 reset IDs, bank mapping is as follows:
+ * 0 ... mpumodrst
+ * 1 ... per0modrst
+ * 2 ... per1modrst
+ * 3 ... brgmodrst
+ * 4 ... sysmodrst
+ */
+#define RSTMGR_EMAC0		RSTMGR_DEFINE(1, 0)
+#define RSTMGR_EMAC1		RSTMGR_DEFINE(1, 1)
+#define RSTMGR_EMAC2		RSTMGR_DEFINE(1, 2)
+#define RSTMGR_L4WD0		RSTMGR_DEFINE(2, 0)
+#define RSTMGR_L4WD1		RSTMGR_DEFINE(2, 1)
+#define RSTMGR_L4SYSTIMER0	RSTMGR_DEFINE(2, 2)
+#define RSTMGR_L4SYSTIMER1	RSTMGR_DEFINE(2, 3)
+#define RSTMGR_SPTIMER0		RSTMGR_DEFINE(2, 4)
+#define RSTMGR_SPTIMER1		RSTMGR_DEFINE(2, 5)
+#define RSTMGR_UART0		RSTMGR_DEFINE(2, 16)
+#define RSTMGR_UART1		RSTMGR_DEFINE(2, 17)
+#define RSTMGR_SPIM0		RSTMGR_DEFINE(1, 17)
+#define RSTMGR_SPIM1		RSTMGR_DEFINE(1, 18)
+#define RSTMGR_QSPI		RSTMGR_DEFINE(1, 6)
+#define RSTMGR_SDMMC		RSTMGR_DEFINE(1, 7)
+#define RSTMGR_DMA		RSTMGR_DEFINE(1, 16)
+#define RSTMGR_DDRSCH		RSTMGR_DEFINE(3, 6)
+#endif
 
 /* Create a human-readable reference to SoCFPGA reset. */
 #define SOCFPGA_RESET(_name)	RSTMGR_##_name
diff --git a/arch/arm/mach-socfpga/reset_manager.c b/arch/arm/mach-socfpga/reset_manager.c
index b6beaa2..d0ff6c4 100644
--- a/arch/arm/mach-socfpga/reset_manager.c
+++ b/arch/arm/mach-socfpga/reset_manager.c
@@ -18,7 +18,9 @@ static const struct socfpga_reset_manager *reset_manager_base =
 static struct socfpga_system_manager *sysmgr_regs =
 	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
 
-/* Assert or de-assert SoCFPGA reset manager reset. */
+/*
+ * Assert or de-assert SoCFPGA reset manager reset.
+ */
 void socfpga_per_reset(u32 reset, int set)
 {
 	const void *reg;
@@ -46,13 +48,29 @@ void socfpga_per_reset(u32 reset, int set)
  * Assert reset on every peripheral but L4WD0.
  * Watchdog must be kept intact to prevent glitches
  * and/or hangs.
+ * For the Arria10, we disable all the peripherals except L4 watchdog0,
+ * L4 Timer 0, and ECC.
  */
 void socfpga_per_reset_all(void)
 {
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 	const u32 l4wd0 = 1 << RSTMGR_RESET(SOCFPGA_RESET(L4WD0));
 
 	writel(~l4wd0, &reset_manager_base->per_mod_reset);
 	writel(0xffffffff, &reset_manager_base->per2_mod_reset);
+#else
+	const u32 l4wd0 = (1 << RSTMGR_RESET(SOCFPGA_RESET(L4WD0)) |
+			(1 << RSTMGR_RESET(SOCFPGA_RESET(L4SYSTIMER0))));
+
+	unsigned mask_ecc_ocp = 0x0000FF00;
+
+	/* disable all components except ECC_OCP, L4 Timer0 and L4 WD0 */
+	writel(~l4wd0, &reset_manager_base->per1_mod_reset);
+	setbits_le32(&reset_manager_base->per0_mod_reset, ~mask_ecc_ocp);
+
+	/* Finally disable the ECC_OCP */
+	setbits_le32(&reset_manager_base->per0_mod_reset, mask_ecc_ocp);
+#endif
 }
 
 /*
@@ -71,6 +89,7 @@ void reset_cpu(ulong addr)
 		;
 }
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 /*
  * Release peripherals from reset based on handoff
  */
@@ -78,6 +97,7 @@ void reset_deassert_peripherals_handoff(void)
 {
 	writel(0, &reset_manager_base->per_mod_reset);
 }
+#endif
 
 #if defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
 void socfpga_bridges_reset(int enable)
@@ -92,6 +112,7 @@ void socfpga_bridges_reset(int enable)
 
 void socfpga_bridges_reset(int enable)
 {
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 	const uint32_t l3mask = L3REGS_REMAP_LWHPS2FPGA_MASK |
 				L3REGS_REMAP_HPS2FPGA_MASK |
 				L3REGS_REMAP_OCRAM_MASK;
@@ -116,5 +137,6 @@ void socfpga_bridges_reset(int enable)
 		/* Remap the bridges into memory map */
 		writel(l3mask, SOCFPGA_L3REGS_ADDRESS);
 	}
+#endif
 }
 #endif
-- 
1.7.7.4

[U-Boot] [v3 11/30] arm: socfpga: wrap system manager functions for A5/C5 devices

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

The system manager on Arria10 is not used for pin muxing duties, so wrap
these functions for GEN5 devices only.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
 arch/arm/mach-socfpga/system_manager.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-socfpga/system_manager.c b/arch/arm/mach-socfpga/system_manager.c
index 75a65f3..9e1c3fd 100644
--- a/arch/arm/mach-socfpga/system_manager.c
+++ b/arch/arm/mach-socfpga/system_manager.c
@@ -19,6 +19,7 @@ static struct socfpga_system_manager *sysmgr_regs =
  * The value is not wrote to SYSMGR.FPGAINTF.MODULE but
  * CONFIG_SYSMGR_ISWGRP_HANDOFF.
  */
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 static void populate_sysmgr_fpgaintf_module(void)
 {
 	uint32_t handoff_val = 0;
@@ -83,3 +84,4 @@ void sysmgr_config_warmrstcfgio(int enable)
 		clrbits_le32(&sysmgr_regs->romcodegrp_ctrl,
 			     SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGIO);
 }
+#endif /* CONFIG_TARGET_SOCFPGA_GEN5 */
-- 
1.7.7.4

[U-Boot] [v3 12/30] arm: socfpga: arria10: don't build GEN5 sdram for arria10

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

The Arria10 device will not be able to re-use the GEN5 SDRAM controller,
so we shouldn't build the driver. Move CONFIG_ALTERA_SDRAM to Kconfig
option in drivers/ddr/altera/Kconfig.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
 drivers/Kconfig                  |    2 ++
 drivers/ddr/Kconfig              |    1 +
 drivers/ddr/altera/Kconfig       |    6 ++++++
 include/configs/socfpga_common.h |    5 -----
 4 files changed, 9 insertions(+), 5 deletions(-)
 create mode 100644 drivers/ddr/Kconfig
 create mode 100644 drivers/ddr/altera/Kconfig

diff --git a/drivers/Kconfig b/drivers/Kconfig
index 0e5d97d..3e6bbac 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -14,6 +14,8 @@ source "drivers/cpu/Kconfig"
 
 source "drivers/crypto/Kconfig"
 
+source "drivers/ddr/Kconfig"
+
 source "drivers/demo/Kconfig"
 
 source "drivers/ddr/fsl/Kconfig"
diff --git a/drivers/ddr/Kconfig b/drivers/ddr/Kconfig
new file mode 100644
index 0000000..b764add
--- /dev/null
+++ b/drivers/ddr/Kconfig
@@ -0,0 +1 @@
+source "drivers/ddr/altera/Kconfig"
diff --git a/drivers/ddr/altera/Kconfig b/drivers/ddr/altera/Kconfig
new file mode 100644
index 0000000..9554da7
--- /dev/null
+++ b/drivers/ddr/altera/Kconfig
@@ -0,0 +1,6 @@
+config ALTERA_SDRAM
+	bool "SoCFPGA SDRAM for Arria5/Cyclone5 devices"
+	default y if TARGET_SOCFPGA_GEN5
+	help
+	  This is for building the SDRAM controller for the Arria5/Cyclone5
+	  devices.
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index 31f1338..bbbde1e 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -77,11 +77,6 @@
 #define CONFIG_SYS_PL310_BASE		SOCFPGA_MPUL2_ADDRESS
 
 /*
- * SDRAM controller
- */
-#define CONFIG_ALTERA_SDRAM
-
-/*
  * EPCS/EPCQx1 Serial Flash Controller
  */
 #ifdef CONFIG_ALTERA_SPI
-- 
1.7.7.4

[U-Boot] [v3 13/30] arm: socfpga: arria10 fpga does not have bridges mapped

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

On the Arria10 device, the bridges are not mapped through the interconnect.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
 drivers/fpga/socfpga.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/drivers/fpga/socfpga.c b/drivers/fpga/socfpga.c
index f1b2f2c..bfefafd 100644
--- a/drivers/fpga/socfpga.c
+++ b/drivers/fpga/socfpga.c
@@ -278,8 +278,10 @@ int socfpga_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size)
 	/* Disable all axi bridge (hps2fpga, lwhps2fpga & fpga2hps) */
 	socfpga_bridges_reset(1);
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 	/* Unmap the bridges from NIC-301 */
 	writel(0x1, SOCFPGA_L3REGS_ADDRESS);
+#endif
 
 	/* Initialize the FPGA Manager */
 	status = fpgamgr_program_init();
-- 
1.7.7.4

[U-Boot] [v3 14/30] arm: socfpga: arria10: remove board_init and s_init

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

These functions are already in arch/arm/mach-socfpga/board.c

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
 board/altera/arria10-socdk/socfpga.c |   17 -----------------
 1 files changed, 0 insertions(+), 17 deletions(-)

diff --git a/board/altera/arria10-socdk/socfpga.c b/board/altera/arria10-socdk/socfpga.c
index abedc22..8516633 100644
--- a/board/altera/arria10-socdk/socfpga.c
+++ b/board/altera/arria10-socdk/socfpga.c
@@ -5,20 +5,3 @@
  */
 
 #include <common.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void s_init(void)
-{
-}
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-int board_init(void)
-{
-	/* Address of boot parameters for ATAG (if ATAG is used) */
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-	return 0;
-}
-- 
1.7.7.4

[U-Boot] [v3 15/30] arm: socfpga: combine clrbits/setbits into a single clrsetbits

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

There is no dependency on doing a separate clrbits first in the
dwmac_deassert_reset function. Combine them into a single
clrsetbits call.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
 arch/arm/mach-socfpga/misc.c |    9 +++------
 1 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c
index 2645129..c97caea 100644
--- a/arch/arm/mach-socfpga/misc.c
+++ b/arch/arm/mach-socfpga/misc.c
@@ -100,13 +100,10 @@ static void dwmac_deassert_reset(const unsigned int of_reset_id,
 		return;
 	}
 
-	/* Clearing emac0 PHY interface select to 0 */
-	clrbits_le32(&sysmgr_regs->emacgrp_ctrl,
-		     SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift);
-
 	/* configure to PHY interface select choosed */
-	setbits_le32(&sysmgr_regs->emacgrp_ctrl,
-		     phymode << physhift);
+	clrsetbits_le32(&sysmgr_regs->emacgrp_ctrl,
+			SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift,
+			phymode << physhift);
 
 	/* Release the EMAC controller from reset */
 	socfpga_per_reset(reset, 0);
-- 
1.7.7.4

[U-Boot] [v3 16/30] arm: socfpga: add reset manager defines for Arria10

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

Add the Arria10 reset manager defines that is used in Linux. Change the
license to SPDX.

[commit 007bb689b3dbad83cdab0ad192bc6ed0162451e0 from the Linux kernel]

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
 include/dt-bindings/reset/altr,rst-mgr-a10.h |  103 ++++++++++++++++++++++++++
 1 files changed, 103 insertions(+), 0 deletions(-)
 create mode 100644 include/dt-bindings/reset/altr,rst-mgr-a10.h

diff --git a/include/dt-bindings/reset/altr,rst-mgr-a10.h b/include/dt-bindings/reset/altr,rst-mgr-a10.h
new file mode 100644
index 0000000..7619ca2
--- /dev/null
+++ b/include/dt-bindings/reset/altr,rst-mgr-a10.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright (c) 2014, Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#ifndef _DT_BINDINGS_RESET_ALTR_RST_MGR_A10_H
+#define _DT_BINDINGS_RESET_ALTR_RST_MGR_A10_H
+
+/* MPUMODRST */
+#define CPU0_RESET		0
+#define CPU1_RESET		1
+#define WDS_RESET		2
+#define SCUPER_RESET		3
+
+/* PER0MODRST */
+#define EMAC0_RESET		32
+#define EMAC1_RESET		33
+#define EMAC2_RESET		34
+#define USB0_RESET		35
+#define USB1_RESET		36
+#define NAND_RESET		37
+#define QSPI_RESET		38
+#define SDMMC_RESET		39
+#define EMAC0_OCP_RESET		40
+#define EMAC1_OCP_RESET		41
+#define EMAC2_OCP_RESET		42
+#define USB0_OCP_RESET		43
+#define USB1_OCP_RESET		44
+#define NAND_OCP_RESET		45
+#define QSPI_OCP_RESET		46
+#define SDMMC_OCP_RESET		47
+#define DMA_RESET		48
+#define SPIM0_RESET		49
+#define SPIM1_RESET		50
+#define SPIS0_RESET		51
+#define SPIS1_RESET		52
+#define DMA_OCP_RESET		53
+#define EMAC_PTP_RESET		54
+/* 55 is empty*/
+#define DMAIF0_RESET		56
+#define DMAIF1_RESET		57
+#define DMAIF2_RESET		58
+#define DMAIF3_RESET		59
+#define DMAIF4_RESET		60
+#define DMAIF5_RESET		61
+#define DMAIF6_RESET		62
+#define DMAIF7_RESET		63
+
+/* PER1MODRST */
+#define L4WD0_RESET		64
+#define L4WD1_RESET		65
+#define L4SYSTIMER0_RESET	66
+#define L4SYSTIMER1_RESET	67
+#define SPTIMER0_RESET		68
+#define SPTIMER1_RESET		69
+/* 70-71 is reserved */
+#define I2C0_RESET		72
+#define I2C1_RESET		73
+#define I2C2_RESET		74
+#define I2C3_RESET		75
+#define I2C4_RESET		76
+/* 77-79 is reserved */
+#define UART0_RESET		80
+#define UART1_RESET		81
+/* 82-87 is reserved */
+#define GPIO0_RESET		88
+#define GPIO1_RESET		89
+#define GPIO2_RESET		90
+
+/* BRGMODRST */
+#define HPS2FPGA_RESET		96
+#define LWHPS2FPGA_RESET	97
+#define FPGA2HPS_RESET		98
+#define F2SSDRAM0_RESET		99
+#define F2SSDRAM1_RESET		100
+#define F2SSDRAM2_RESET		101
+#define DDRSCH_RESET		102
+
+/* SYSMODRST*/
+#define ROM_RESET		128
+#define OCRAM_RESET		129
+/* 130 is reserved */
+#define FPGAMGR_RESET		131
+#define S2F_RESET		132
+#define SYSDBG_RESET		133
+#define OCRAM_OCP_RESET		134
+
+/* COLDMODRST */
+#define CLKMGRCOLD_RESET	160
+/* 161-162 is reserved */
+#define S2FCOLD_RESET		163
+#define TIMESTAMPCOLD_RESET	164
+#define TAPCOLD_RESET		165
+#define HMCCOLD_RESET		166
+#define IOMGRCOLD_RESET		167
+
+/* NRSTMODRST */
+#define NRSTPINOE_RESET		192
+
+/* DBGMODRST */
+#define DBG_RESET		224
+#endif
-- 
1.7.7.4

[U-Boot] [v3 17/30] arm: socfpga: arria10: update dwmac reset function to support Arria10

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

On the Arria10, the EMAC phy mode configuration for each EMACs is located
in separate registers versus being in 1 register for the GEN5 devices. The
Arria10 also has 3 EMACs compared to 2 for the GEN5 devices.

Update the dwmac_deassert_reset function to support both GEN5 and Arria10
devices.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
 .../arm/mach-socfpga/include/mach/system_manager.h |    4 +---
 arch/arm/mach-socfpga/misc.c                       |   14 ++++++++++++++
 2 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-socfpga/include/mach/system_manager.h b/arch/arm/mach-socfpga/include/mach/system_manager.h
index 9ca889a..831ba4a 100644
--- a/arch/arm/mach-socfpga/include/mach/system_manager.h
+++ b/arch/arm/mach-socfpga/include/mach/system_manager.h
@@ -133,9 +133,7 @@ struct socfpga_system_manager {
 	u32  usb0_l3master;
 	u32  usb1_l3master;
 	u32  emac_global;
-	u32  emac0;
-	u32  emac1;
-	u32  emac2;
+	u32  emac[3];
 	u32  _pad_0x50_0x5f[4];
 	u32  fpgaintf_en_global;
 	u32  fpgaintf_en_0;
diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c
index c97caea..510aa1d 100644
--- a/arch/arm/mach-socfpga/misc.c
+++ b/arch/arm/mach-socfpga/misc.c
@@ -21,7 +21,11 @@
 #include <asm/arch/scu.h>
 #include <asm/pl310.h>
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 #include <dt-bindings/reset/altr,rst-mgr.h>
+#else
+#include <dt-bindings/reset/altr,rst-mgr-a10.h>
+#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -95,15 +99,25 @@ static void dwmac_deassert_reset(const unsigned int of_reset_id,
 	} else if (of_reset_id == EMAC1_RESET) {
 		physhift = SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB;
 		reset = SOCFPGA_RESET(EMAC1);
+#ifndef CONFIG_TARGET_SOCFPGA_GEN5
+	} else if (of_reset_id == EMAC2_RESET) {
+		reset = SOCFPGA_RESET(EMAC2);
+#endif
 	} else {
 		printf("GMAC: Invalid reset ID (%i)!\n", of_reset_id);
 		return;
 	}
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 	/* configure to PHY interface select choosed */
 	clrsetbits_le32(&sysmgr_regs->emacgrp_ctrl,
 			SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift,
 			phymode << physhift);
+#else
+	clrsetbits_le32(&sysmgr_regs->emac[of_reset_id - EMAC0_RESET],
+			SYSMGR_EMACGRP_CTRL_PHYSEL_MASK,
+			phymode);
+#endif
 
 	/* Release the EMAC controller from reset */
 	socfpga_per_reset(reset, 0);
-- 
1.7.7.4

[U-Boot] [v3 18/30] arm: socfpga: stratix10: Add SOCFPGA Stratix10 base address

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

Add base address header file for Stratix10 SoC

Signed-off-by: Chin Liang See <clsee@altera.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Ley Foon Tan <lftan@altera.com>
---
 arch/arm/mach-socfpga/include/mach/base_addr_s10.h |   48 ++++++++++++++++++++
 1 files changed, 48 insertions(+), 0 deletions(-)
 create mode 100755 arch/arm/mach-socfpga/include/mach/base_addr_s10.h

diff --git a/arch/arm/mach-socfpga/include/mach/base_addr_s10.h b/arch/arm/mach-socfpga/include/mach/base_addr_s10.h
new file mode 100755
index 0000000..411518d
--- /dev/null
+++ b/arch/arm/mach-socfpga/include/mach/base_addr_s10.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2016, Intel Corporation
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#ifndef _SOCFPGA_S10_BASE_HARDWARE_H_
+#define _SOCFPGA_S10_BASE_HARDWARE_H_
+
+#define SOCFPGA_SMMU_ADDRESS			0xfa000000
+#define SOCFPGA_EMAC0_ADDRESS			0xff800000
+#define SOCFPGA_EMAC1_ADDRESS			0xff802000
+#define SOCFPGA_EMAC2_ADDRESS			0xff804000
+#define SOCFPGA_SDMMC_ADDRESS			0xff808000
+#define SOCFPGA_USB0_ADDRESS			0xffb00000
+#define SOCFPGA_USB1_ADDRESS			0xffb40000
+#define SOCFPGA_NANDREGS_ADDRESS		0xffb80000
+#define SOCFPGA_NANDDATA_ADDRESS		0xffb90000
+#define SOCFPGA_UART0_ADDRESS			0xffc02000
+#define SOCFPGA_UART1_ADDRESS			0xffc02100
+#define SOCFPGA_I2C0_ADDRESS			0xffc02800
+#define SOCFPGA_I2C1_ADDRESS			0xffc02900
+#define SOCFPGA_I2C2_ADDRESS			0xffc02a00
+#define SOCFPGA_I2C3_ADDRESS			0xffc02b00
+#define SOCFPGA_I2C4_ADDRESS			0xffc02c00
+#define SOCFPGA_SPTIMER0_ADDRESS		0xffc03000
+#define SOCFPGA_SPTIMER1_ADDRESS		0xffc03100
+#define SOCFPGA_GPIO0_ADDRESS			0xffc03200
+#define SOCFPGA_GPIO1_ADDRESS			0xffc03300
+#define SOCFPGA_SYSTIMER0_ADDRESS		0xffd00000
+#define SOCFPGA_SYSTIMER0_ADDRESS		0xffd00100
+#define SOCFPGA_L4WD0_ADDRESS			0xffd00200
+#define SOCFPGA_L4WD0_ADDRESS			0xffd00300
+#define SOCFPGA_L4WD0_ADDRESS			0xffd00400
+#define SOCFPGA_L4WD0_ADDRESS			0xffd00500
+#define SOCFPGA_CLKMGR_ADDRESS			0xffd10000
+#define SOCFPGA_RSTMGR_ADDRESS			0xffd11000
+#define SOCFPGA_SYSMGR_ADDRESS			0xffd12000
+#define SOCFPGA_PINMUX_DEDICATED_IO_ADDRESS	0xffd13000
+#define SOCFPGA_DMANONSECURE_ADDRESS		0xffda0000
+#define SOCFPGA_DMASECURE_ADDRESS		0xffda1000
+#define SOCFPGA_SPIS0_ADDRESS			0xffda2000
+#define SOCFPGA_SPIS1_ADDRESS			0xffda3000
+#define SOCFPGA_SPIM0_ADDRESS			0xffda4000
+#define SOCFPGA_SPIM1_ADDRESS			0xffda5000
+#define SOCFPGA_OCRAM_ADDRESS			0xffe00000
+
+#endif /* _SOCFPGA_S10_BASE_HARDWARE_H_ */
-- 
1.7.7.4

[U-Boot] [v3 19/30] ARM:dts: Added device tree for socfpga arria10 development kit sdmmc

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

This is initial version of device tree for the Intel socfpga arria10
development kit with sdmmc.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
Changes for V3
- no changes
Changes for V2
- modified the handoff.dtsi to board specific, and moving some chosen
  config to handoff.dtsi because these config would be generated by tool
---
 arch/arm/dts/Makefile                              |    3 +-
 arch/arm/dts/socfpga_arria10.dtsi                  |  859 ++++++++++++++++++++
 arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts       |   30 +
 .../dts/socfpga_arria10_socdk_sdmmc_handoff.dtsi   |  479 +++++++++++
 4 files changed, 1370 insertions(+), 1 deletions(-)
 create mode 100644 arch/arm/dts/socfpga_arria10.dtsi
 create mode 100644 arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts
 create mode 100644 arch/arm/dts/socfpga_arria10_socdk_sdmmc_handoff.dtsi

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 3ee608b..024aa5f 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -137,7 +137,8 @@ dtb-$(CONFIG_ARCH_SOCFPGA) +=				\
 	socfpga_cyclone5_sockit.dtb			\
 	socfpga_cyclone5_socrates.dtb			\
 	socfpga_cyclone5_sr1500.dtb			\
-	socfpga_cyclone5_vining_fpga.dtb
+	socfpga_cyclone5_vining_fpga.dtb		\
+	socfpga_arria10_socdk_sdmmc.dtb
 
 dtb-$(CONFIG_TARGET_DRA7XX_EVM) += dra72-evm.dtb dra7-evm.dtb	\
 	dra72-evm-revc.dtb dra71-evm.dtb
diff --git a/arch/arm/dts/socfpga_arria10.dtsi b/arch/arm/dts/socfpga_arria10.dtsi
new file mode 100644
index 0000000..f63c4b4
--- /dev/null
+++ b/arch/arm/dts/socfpga_arria10.dtsi
@@ -0,0 +1,859 @@
+/*
+ * Copyright (C) 2016 Intel Corporation
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/altr,rst-mgr-a10.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		timer0 = &timer0;
+		timer1 = &timer1;
+		timer2 = &timer2;
+		timer3 = &timer3;
+		spi0 = &spi0;
+		spi1 = &spi1;
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu at 0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+		cpu at 1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	intc: intc at ffffd000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xffffd000 0x1000>,
+		      <0xffffc100 0x100>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		device_type = "soc";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		amba {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pdma: pdma at ffda1000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0xffda1000 0x1000>;
+				interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 84 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 86 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 88 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 89 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 90 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 91 IRQ_TYPE_LEVEL_HIGH>;
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+				clocks = <&l4_main_clk>;
+				clock-names = "apb_pclk";
+			};
+		};
+
+		clkmgr at ffd04000 {
+			compatible = "altr,clk-mgr";
+			reg = <0xffd04000 0x1000>;
+			reg-names = "soc_clock_manager_OCP_SLV";
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				cb_intosc_hs_div2_clk: cb_intosc_hs_div2_clk {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+				};
+
+				cb_intosc_ls_clk: cb_intosc_ls_clk {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+				};
+
+				f2s_free_clk: f2s_free_clk {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+				};
+
+				osc1: osc1 {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+				};
+
+				main_pll: main_pll {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#clock-cells = <0>;
+					compatible = "altr,socfpga-a10-pll-clock";
+					clocks = <&osc1>, <&cb_intosc_ls_clk>,
+							 <&f2s_free_clk>;
+					reg = <0x40>;
+
+					main_mpu_base_clk: main_mpu_base_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_pll>;
+						div-reg = <0x140 0 11>;
+					};
+
+					main_noc_base_clk: main_noc_base_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_pll>;
+						div-reg = <0x144 0 11>;
+					};
+
+					main_emaca_clk: main_emaca_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_pll>;
+						reg = <0x68>;
+					};
+
+					main_emacb_clk: main_emacb_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_pll>;
+						reg = <0x6C>;
+					};
+
+					main_emac_ptp_clk: main_emac_ptp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_pll>;
+						reg = <0x70>;
+					};
+
+					main_gpio_db_clk: main_gpio_db_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_pll>;
+						reg = <0x74>;
+					};
+
+					main_sdmmc_clk: main_sdmmc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_pll>;
+						reg = <0x78>;
+					};
+
+					main_s2f_usr0_clk: main_s2f_usr0_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_pll>;
+						reg = <0x7C>;
+					};
+
+					main_s2f_usr1_clk: main_s2f_usr1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_pll>;
+						reg = <0x80>;
+					};
+
+					main_hmc_pll_ref_clk: main_hmc_pll_ref_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_pll>;
+						reg = <0x84>;
+					};
+
+					main_periph_ref_clk: main_periph_ref_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_pll>;
+						reg = <0x9C>;
+					};
+				};
+
+				periph_pll: periph_pll {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#clock-cells = <0>;
+					compatible = "altr,socfpga-a10-pll-clock";
+					clocks = <&osc1>, <&cb_intosc_ls_clk>,
+							 <&f2s_free_clk>, <&main_periph_ref_clk>;
+					reg = <0xC0>;
+
+					peri_mpu_base_clk: peri_mpu_base_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&periph_pll>;
+						div-reg = <0x140 16 11>;
+					};
+
+					peri_noc_base_clk: peri_noc_base_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&periph_pll>;
+						div-reg = <0x144 16 11>;
+					};
+
+					peri_emaca_clk: peri_emaca_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&periph_pll>;
+						reg = <0xE8>;
+					};
+
+					peri_emacb_clk: peri_emacb_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&periph_pll>;
+						reg = <0xEC>;
+					};
+
+					peri_emac_ptp_clk: peri_emac_ptp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&periph_pll>;
+						reg = <0xF0>;
+					};
+
+					peri_gpio_db_clk: peri_gpio_db_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&periph_pll>;
+						reg = <0xF4>;
+					};
+
+					peri_sdmmc_clk: peri_sdmmc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&periph_pll>;
+						reg = <0xF8>;
+					};
+
+					peri_s2f_usr0_clk: peri_s2f_usr0_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&periph_pll>;
+						reg = <0xFC>;
+					};
+
+					peri_s2f_usr1_clk: peri_s2f_usr1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&periph_pll>;
+						reg = <0x100>;
+					};
+
+					peri_hmc_pll_ref_clk: peri_hmc_pll_ref_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&periph_pll>;
+						reg = <0x104>;
+					};
+				};
+
+				mpu_free_clk: mpu_free_clk {
+					#clock-cells = <0>;
+					compatible = "altr,socfpga-a10-perip-clk";
+					clocks = <&main_mpu_base_clk>, <&peri_mpu_base_clk>,
+							 <&osc1>, <&cb_intosc_hs_div2_clk>,
+							 <&f2s_free_clk>;
+					reg = <0x60>;
+				};
+
+				noc_free_clk: noc_free_clk {
+					#clock-cells = <0>;
+					compatible = "altr,socfpga-a10-perip-clk";
+					clocks = <&main_noc_base_clk>, <&peri_noc_base_clk>,
+							 <&osc1>, <&cb_intosc_hs_div2_clk>,
+							 <&f2s_free_clk>;
+					reg = <0x64>;
+				};
+
+				s2f_user1_free_clk: s2f_user1_free_clk {
+					#clock-cells = <0>;
+					compatible = "altr,socfpga-a10-perip-clk";
+					clocks = <&main_s2f_usr1_clk>, <&peri_s2f_usr1_clk>,
+							 <&osc1>, <&cb_intosc_hs_div2_clk>,
+							 <&f2s_free_clk>;
+					reg = <0x104>;
+				};
+
+				sdmmc_free_clk: sdmmc_free_clk {
+					#clock-cells = <0>;
+					compatible = "altr,socfpga-a10-perip-clk";
+					clocks = <&main_sdmmc_clk>, <&peri_sdmmc_clk>,
+							 <&osc1>, <&cb_intosc_hs_div2_clk>,
+							 <&f2s_free_clk>;
+					fixed-divider = <4>;
+					reg = <0xF8>;
+				};
+
+				l4_sys_free_clk: l4_sys_free_clk {
+					#clock-cells = <0>;
+					compatible = "altr,socfpga-a10-perip-clk";
+					clocks = <&noc_free_clk>;
+					fixed-divider = <4>;
+				};
+
+				l4_main_clk: l4_main_clk {
+					#clock-cells = <0>;
+					compatible = "altr,socfpga-a10-gate-clk";
+					clocks = <&noc_free_clk>;
+					div-reg = <0xA8 0 2>;
+					clk-gate = <0x48 1>;
+				};
+
+				l4_mp_clk: l4_mp_clk {
+					#clock-cells = <0>;
+					compatible = "altr,socfpga-a10-gate-clk";
+					clocks = <&noc_free_clk>;
+					div-reg = <0xA8 8 2>;
+					clk-gate = <0x48 2>;
+				};
+
+				l4_sp_clk: l4_sp_clk {
+					#clock-cells = <0>;
+					compatible = "altr,socfpga-a10-gate-clk";
+					clocks = <&noc_free_clk>;
+					div-reg = <0xA8 16 2>;
+					clk-gate = <0x48 3>;
+				};
+
+				mpu_periph_clk: mpu_periph_clk {
+					#clock-cells = <0>;
+					compatible = "altr,socfpga-a10-gate-clk";
+					clocks = <&mpu_free_clk>;
+					fixed-divider = <4>;
+					clk-gate = <0x48 0>;
+				};
+
+				sdmmc_clk: sdmmc_clk {
+					#clock-cells = <0>;
+					compatible = "altr,socfpga-a10-gate-clk";
+					clocks = <&sdmmc_free_clk>;
+					clk-gate = <0xC8 5>;
+					clk-phase = <0 135>;
+				};
+
+				qspi_clk: qspi_clk {
+					#clock-cells = <0>;
+					compatible = "altr,socfpga-a10-gate-clk";
+					clocks = <&l4_main_clk>;
+					clk-gate = <0xC8 11>;
+				};
+
+				nand_clk: nand_clk {
+					#clock-cells = <0>;
+					compatible = "altr,socfpga-a10-gate-clk";
+					clocks = <&l4_mp_clk>;
+					clk-gate = <0xC8 10>;
+				};
+
+				spi_m_clk: spi_m_clk {
+					#clock-cells = <0>;
+					compatible = "altr,socfpga-a10-gate-clk";
+					clocks = <&l4_main_clk>;
+					clk-gate = <0xC8 9>;
+				};
+
+				usb_clk: usb_clk {
+					#clock-cells = <0>;
+					compatible = "altr,socfpga-a10-gate-clk";
+					clocks = <&l4_mp_clk>;
+					clk-gate = <0xC8 8>;
+				};
+
+				s2f_usr1_clk: s2f_usr1_clk {
+					#clock-cells = <0>;
+					compatible = "altr,socfpga-a10-gate-clk";
+					clocks = <&peri_s2f_usr1_clk>;
+					clk-gate = <0xC8 6>;
+				};
+			};
+		};
+
+		gmac0: ethernet at ff800000 {
+			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x44 0>;
+			reg = <0xff800000 0x2000>;
+			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			/* Filled in by bootloader */
+			mac-address = [00 00 00 00 00 00];
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <16384>;
+			clocks = <&l4_mp_clk>;
+			clock-names = "stmmaceth";
+			resets = <&rst EMAC0_RESET>;
+			reset-names = "stmmaceth";
+			status = "disabled";
+		};
+
+		gmac1: ethernet at ff802000 {
+			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x48 0>;
+		        reg = <0xff802000 0x2000>;
+			interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			/* Filled in by bootloader */
+			mac-address = [00 00 00 00 00 00];
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <16384>;
+			clocks = <&l4_mp_clk>;
+			clock-names = "stmmaceth";
+			resets = <&rst EMAC1_RESET>;
+			reset-names = "stmmaceth";
+			status = "disabled";
+		};
+
+		gmac2: ethernet at ff804000 {
+			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x4C 0>;
+			reg = <0xff804000 0x2000>;
+			interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			/* Filled in by bootloader */
+			mac-address = [00 00 00 00 00 00];
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <16384>;
+			clocks = <&l4_mp_clk>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+		};
+
+		gpio0: gpio at ffc02900 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc02900 0x100>;
+			status = "disabled";
+
+			porta: gpio-controller at 0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <29>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio1: gpio at ffc02a00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc02a00 0x100>;
+			status = "disabled";
+
+			portb: gpio-controller at 0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <29>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio2: gpio at ffc02b00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc02b00 0x100>;
+			status = "disabled";
+
+			portc: gpio-controller at 0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <27>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		fpga_mgr: fpga-mgr at ffd03000 {
+			compatible = "altr,socfpga-a10-fpga-mgr";
+			reg = <0xffd03000 0x100
+			       0xffcfe400 0x20>;
+			clocks = <&l4_mp_clk>;
+			resets = <&rst FPGAMGR_RESET>;
+			reset-names = "fpgamgr";
+		};
+
+		i2c0: i2c at ffc02200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02200 0x100>;
+			interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
+			status = "disabled";
+		};
+
+		i2c1: i2c at ffc02300 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02300 0x100>;
+			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
+			status = "disabled";
+		};
+
+		i2c2: i2c at ffc02400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02400 0x100>;
+			interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
+			status = "disabled";
+		};
+
+		i2c3: i2c at ffc02500 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02500 0x100>;
+			interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
+			status = "disabled";
+		};
+
+		i2c4: i2c at ffc02600 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02600 0x100>;
+			interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
+			status = "disabled";
+		};
+
+		sdr: sdr at 0xffcfb100 {
+			compatible = "syscon";
+			reg = <0xffcfb100 0x80>;
+		};
+
+		spi0: spi at ffda4000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda4000 0x100>;
+			interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+			num-chipselect = <4>;
+			bus-num = <0>;
+			tx-dma-channel = <&pdma 16>;
+			rx-dma-channel = <&pdma 17>;
+			clocks = <&spi_m_clk>;
+			status = "disabled";
+		};
+
+		spi1: spi at ffda5000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda5000 0x100>;
+			interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
+			num-chipselect = <4>;
+			bus-num = <0>;
+			tx-dma-channel = <&pdma 20>;
+			rx-dma-channel = <&pdma 21>;
+			clocks = <&spi_m_clk>;
+			status = "disabled";
+		};
+
+		L2: l2-cache at fffff000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xfffff000 0x1000>;
+			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		mmc: dwmmc0 at ff808000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "altr,socfpga-dw-mshc";
+			reg = <0xff808000 0x1000>;
+			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+			fifo-depth = <0x400>;
+			bus-width = <4>;
+			clocks = <&l4_mp_clk>, <&sdmmc_clk>;
+			clock-names = "biu", "ciu";
+			status = "disabled";
+		};
+
+		ocram: sram at ffe00000 {
+			compatible = "mmio-sram";
+			reg = <0xffe00000 0x40000>;
+		};
+
+		eccmgr: eccmgr at ffd06000 {
+			compatible = "altr,socfpga-a10-ecc-manager";
+			altr,sysmgr-syscon = <&sysmgr>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ranges;
+
+			sdramedac {
+				compatible = "altr,sdram-edac-a10";
+				altr,sdr-syscon = <&sdr>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+					     <49 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			l2-ecc at ffd06010 {
+				compatible = "altr,socfpga-a10-l2-ecc";
+				reg = <0xffd06010 0x4>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+					     <32 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			ocram-ecc at ff8c3000 {
+				compatible = "altr,socfpga-a10-ocram-ecc";
+				reg = <0xff8c3000 0x400>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
+					     <33 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sdmmca-ecc at ff8c2c00 {
+				compatible = "altr,socfpga-sdmmc-ecc";
+				reg = <0xff8c2c00 0x400>;
+				altr,ecc-parent = <&mmc>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+					<47 IRQ_TYPE_LEVEL_HIGH>,
+					<16 IRQ_TYPE_LEVEL_HIGH>,
+					<48 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			emac0-rx-ecc at ff8c0800 {
+				compatible = "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0800 0x400>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>,
+					     <36 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			emac0-tx-ecc at ff8c0c00 {
+				compatible = "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0c00 0x400>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
+					     <37 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			dma-ecc at ff8c8000 {
+				compatible = "altr,socfpga-dma-ecc";
+				reg = <0xff8c8000 0x400>;
+				altr,ecc-parent = <&pdma>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+					     <42 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			usb0-ecc at ff8c8800 {
+				compatible = "altr,socfpga-usb-ecc";
+				reg = <0xff8c8800 0x400>;
+				altr,ecc-parent = <&usb0>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+					     <34 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		qspi: qspi at ff809000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "cadence,qspi";
+			reg = <0xff809000 0x100>,
+				<0xffa00000 0x100000>;
+			interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_main_clk>;
+			ext-decoder = <0>;  /* external decoder */
+			num-chipselect = <4>;
+			fifo-depth = <128>;
+			sram-size = <512>;
+			bus-num = <2>;
+			status = "disabled";
+		};
+
+		rst: rstmgr at ffd05000 {
+			#reset-cells = <1>;
+			compatible = "altr,rst-mgr";
+			reg = <0xffd05000 0x100>;
+			altr,modrst-offset = <0x20>;
+		};
+
+		scu: snoop-control-unit at ffffc000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xffffc000 0x100>;
+		};
+
+		sysmgr: sysmgr at ffd06000 {
+			compatible = "altr,sys-mgr", "syscon";
+			reg = <0xffd06000 0x300>;
+			cpu1-start-addr = <0xffd06230>;
+		};
+
+		/* Local timer */
+		timer at ffffc600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xffffc600 0x100>;
+			interrupts = <1 13 0xf04>;
+			clocks = <&mpu_periph_clk>;
+		};
+
+		timer0: timer0 at ffc02700 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffc02700 0x100>;
+			clocks = <&l4_sp_clk>;
+			clock-names = "timer";
+		};
+
+		timer1: timer1 at ffc02800 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffc02800 0x100>;
+			clocks = <&l4_sp_clk>;
+			clock-names = "timer";
+		};
+
+		timer2: timer2 at ffd00000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffd00000 0x100>;
+			clocks = <&l4_sys_free_clk>;
+			clock-names = "timer";
+		};
+
+		timer3: timer3 at ffd00100 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffd01000 0x100>;
+			clocks = <&l4_sys_free_clk>;
+			clock-names = "timer";
+		};
+
+		uart0: serial0 at ffc02000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02000 0x100>;
+			interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&l4_sp_clk>;
+			status = "disabled";
+		};
+
+		uart1: serial1 at ffc02100 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02100 0x100>;
+			interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&l4_sp_clk>;
+			status = "disabled";
+		};
+
+		usbphy0: usbphy at 0 {
+			#phy-cells = <0>;
+			compatible = "usb-nop-xceiv";
+			status = "okay";
+		};
+
+		usb0: usb at ffb00000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb00000 0xffff>;
+			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clk>;
+			clock-names = "otg";
+			resets = <&rst USB0_RESET>;
+			reset-names = "dwc2";
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		usb1: usb at ffb40000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb40000 0xffff>;
+			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clk>;
+			clock-names = "otg";
+			resets = <&rst USB1_RESET>;
+			reset-names = "dwc2";
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		watchdog0: watchdog at ffd00200 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00200 0x100>;
+			interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sys_free_clk>;
+			status = "disabled";
+		};
+
+		watchdog1: watchdog at ffd00300 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00300 0x100>;
+			interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sys_free_clk>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts b/arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts
new file mode 100644
index 0000000..fdd581b
--- /dev/null
+++ b/arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2016 Intel Corporation
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+/dts-v1/;
+#include "socfpga_arria10_socdk_sdmmc_handoff.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+};
+
+&uart1 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&mmc {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+	num-slots = <1>;
+	cap-sd-highspeed;
+	broken-cd;
+	bus-width = <4>;
+	altr,dw-mshc-ciu-div = <3>;
+	altr,dw-mshc-sdr-timing = <0 3>;
+};
diff --git a/arch/arm/dts/socfpga_arria10_socdk_sdmmc_handoff.dtsi b/arch/arm/dts/socfpga_arria10_socdk_sdmmc_handoff.dtsi
new file mode 100644
index 0000000..0778141
--- /dev/null
+++ b/arch/arm/dts/socfpga_arria10_socdk_sdmmc_handoff.dtsi
@@ -0,0 +1,479 @@
+/*
+ * Copyright (C) 2016 Intel Corporation
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ *
+ *<auto-generated>
+ *	This code was generated by a tool based on
+ *	handoffs from both Qsys and Quartus.
+ *
+ *	Changes to this file may be lost if
+ *	the code is regenerated.
+ *</auto-generated>
+ */
+
+#include "socfpga_arria10.dtsi"
+
+/ {
+	model = "Altera SOCFPGA Arria 10";
+	compatible = "altr,socfpga-arria10", "altr,socfpga";
+
+	chosen {
+		/* Bootloader setting: uboot.rbf_filename */
+		cff-file = "ghrd_10as066n2.periph.rbf";
+		early-release-fpga-config;
+	};
+
+	soc {
+		u-boot,dm-pre-reloc;
+		clkmgr at ffd04000 {
+			u-boot,dm-pre-reloc;
+			clocks {
+				u-boot,dm-pre-reloc;
+				osc1 {
+					u-boot,dm-pre-reloc;
+					clock-frequency = <25000000>;
+					clock-output-names = "altera_arria10_hps_eosc1-clk";
+				};
+
+				cb_intosc_ls_clk {
+					u-boot,dm-pre-reloc;
+					clock-frequency = <60000000>;
+					clock-output-names = "altera_arria10_hps_cb_intosc_ls-clk";
+				};
+
+				f2s_free_clk {
+					u-boot,dm-pre-reloc;
+					clock-frequency = <200000000>;
+					clock-output-names = "altera_arria10_hps_f2h_free-clk";
+				};
+
+				main_pll {
+					u-boot,dm-pre-reloc;
+				/*
+				 * Address Block: soc_clock_manager_OCP_SLV.
+				 * i_clk_mgr_mainpllgrp
+				 */
+					altr,of_reg_value = <
+						0	/* Field: vco0.psrc */
+						1	/* Field: vco1.denom */
+						191	/* Field: vco1.numer */
+						0	/* Field: mpuclk */
+						0	/* Field: mpuclk.cnt */
+						0	/* Field: mpuclk.src */
+						0	/* Field: nocclk */
+						0	/* Field: nocclk.cnt */
+						0	/* Field: nocclk.src */
+						900	/* Field: cntr2clk.cnt */
+						900	/* Field: cntr3clk.cnt */
+						900	/* Field: cntr4clk.cnt */
+						900	/* Field: cntr5clk.cnt */
+						900	/* Field: cntr6clk.cnt */
+						900	/* Field: cntr7clk.cnt */
+						0	/* Field: cntr7clk.src */
+						900	/* Field: cntr8clk.cnt */
+						900	/* Field: cntr9clk.cnt */
+						0	/* Field: cntr9clk.src */
+						900	/* Field: cntr15clk.cnt */
+						0	/* Field: nocdiv.l4mainclk */
+						0	/* Field: nocdiv.l4mpclk */
+						2	/* Field: nocdiv.l4spclk */
+						0	/* Field: nocdiv.csatclk */
+						1	/* Field: nocdiv.cstraceclk */
+						1	/* Field: nocdiv.cspdbgclk */
+					>;
+				};
+
+				periph_pll {
+					u-boot,dm-pre-reloc;
+				/*
+				 * Address Block: soc_clock_manager_OCP_SLV.
+				 * i_clk_mgr_perpllgrp
+				 */
+					altr,of_reg_value = <
+						0	/* Field: vco0.psrc */
+						1	/* Field: vco1.denom */
+						159	/* Field: vco1.numer */
+						7	/* Field: cntr2clk.cnt */
+						1	/* Field: cntr2clk.src */
+						900	/* Field: cntr3clk.cnt */
+						1	/* Field: cntr3clk.src */
+						19	/* Field: cntr4clk.cnt */
+						1	/* Field: cntr4clk.src */
+						499	/* Field: cntr5clk.cnt */
+						1	/* Field: cntr5clk.src */
+						9	/* Field: cntr6clk.cnt */
+						1	/* Field: cntr6clk.src */
+						900	/* Field: cntr7clk.cnt */
+						900	/* Field: cntr8clk.cnt */
+						0	/* Field: cntr8clk.src */
+						900	/* Field: cntr9clk.cnt */
+						0	/* Field: emacctl.emac0sel */
+						0	/* Field: emacctl.emac1sel */
+						0	/* Field: emacctl.emac2sel */
+						32000	/* Field: gpiodiv.gpiodbclk */
+					>;
+				};
+
+				altera {
+					u-boot,dm-pre-reloc;
+				/*
+				 * Address Block: soc_clock_manager_OCP_SLV.
+				 * i_clk_mgr_alteragrp
+				 */
+					altr,of_reg_value = <
+						0x0384000b	/* Register: nocclk */
+						0x03840001	/* Register: mpuclk */
+					>;
+				};
+			};
+		};
+
+		/*
+		 * Driver: altera_arria10_soc_3v_io48_pin_mux_arria10_uboot_driver
+		 * Binding: pinmux
+		 */
+		i_io48_pin_mux: pinmux at 0xffd07000 {
+			u-boot,dm-pre-reloc;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "pinctrl-single";
+			reg = <0xffd07000 0x00000800>;
+			reg-names = "soc_3v_io48_pin_mux_OCP_SLV";
+
+			/*
+			 *	Address Block: soc_3v_io48_pin_mux_OCP_SLV.
+			 *					i_io48_pin_mux_shared_3v_io_grp
+			 */
+			shared {
+				u-boot,dm-pre-reloc;
+				reg = <0xffd07000 0x00000200>;
+				pinctrl-single,register-width = <32>;
+				pinctrl-single,function-mask = <0x0000000f>;
+				pinctrl-single,pins =
+					/* Reg: pinmux_shared_io_q1_1 */
+					<0x00000000 0x00000008>,
+					/* Reg: pinmux_shared_io_q1_2 */
+					<0x00000004 0x00000008>,
+					/* Reg: pinmux_shared_io_q1_3 */
+					<0x00000008 0x00000008>,
+					/* Reg: pinmux_shared_io_q1_4 */
+					<0x0000000c 0x00000008>,
+					/* Reg: pinmux_shared_io_q1_5 */
+					<0x00000010 0x00000008>,
+					/* Reg: pinmux_shared_io_q1_6 */
+					<0x00000014 0x00000008>,
+					/* Reg: pinmux_shared_io_q1_7 */
+					<0x00000018 0x00000008>,
+					/* Reg: pinmux_shared_io_q1_8 */
+					<0x0000001c 0x00000008>,
+					/* Reg: pinmux_shared_io_q1_9 */
+					<0x00000020 0x00000008>,
+					/* Reg: pinmux_shared_io_q1_10 */
+					<0x00000024 0x00000008>,
+					/* Reg: pinmux_shared_io_q1_11 */
+					<0x00000028 0x00000008>,
+					/* Reg: pinmux_shared_io_q1_12 */
+					<0x0000002c 0x00000008>,
+					/* Reg: pinmux_shared_io_q2_1 */
+					<0x00000030 0x00000004>,
+					/* Reg: pinmux_shared_io_q2_2 */
+					<0x00000034 0x00000004>,
+					/* Reg: pinmux_shared_io_q2_3 */
+					<0x00000038 0x00000004>,
+					/* Reg: pinmux_shared_io_q2_4 */
+					<0x0000003c 0x00000004>,
+					/* Reg: pinmux_shared_io_q2_5 */
+					<0x00000040 0x00000004>,
+					/* Reg: pinmux_shared_io_q2_6 */
+					<0x00000044 0x00000004>,
+					/* Reg: pinmux_shared_io_q2_7 */
+					<0x00000048 0x00000004>,
+					/* Reg: pinmux_shared_io_q2_8 */
+					<0x0000004c 0x00000004>,
+					/* Reg: pinmux_shared_io_q2_9 */
+					<0x00000050 0x00000004>,
+					/* Reg: pinmux_shared_io_q2_10 */
+					<0x00000054 0x00000004>,
+					/* Reg: pinmux_shared_io_q2_11 */
+					<0x00000058 0x00000004>,
+					/* Reg: pinmux_shared_io_q2_12 */
+					<0x0000005c 0x00000004>,
+					/* Reg: pinmux_shared_io_q3_1 */
+					<0x00000060 0x00000003>,
+					/* Reg: pinmux_shared_io_q3_2 */
+					<0x00000064 0x00000003>,
+					/* Reg: pinmux_shared_io_q3_3 */
+					<0x00000068 0x00000003>,
+					/* Reg: pinmux_shared_io_q3_4 */
+					<0x0000006c 0x00000003>,
+					/* Reg: pinmux_shared_io_q3_5 */
+					<0x00000070 0x00000003>,
+					/* Reg: pinmux_shared_io_q3_6 */
+					<0x00000074 0x0000000f>,
+					/* Reg: pinmux_shared_io_q3_7 */
+					<0x00000078 0x0000000a>,
+					/* Reg: pinmux_shared_io_q3_8 */
+					<0x0000007c 0x0000000a>,
+					/* Reg: pinmux_shared_io_q3_9 */
+					<0x00000080 0x0000000a>,
+					/* Reg: pinmux_shared_io_q3_10 */
+					<0x00000084 0x0000000a>,
+					/* Reg: pinmux_shared_io_q3_11 */
+					<0x00000088 0x00000001>,
+					/* Reg: pinmux_shared_io_q3_12 */
+					<0x0000008c 0x00000001>,
+					/* Reg: pinmux_shared_io_q4_1 */
+					<0x00000090 0x00000000>,
+					/* Reg: pinmux_shared_io_q4_2 */
+					<0x00000094 0x00000000>,
+					/* Reg: pinmux_shared_io_q4_3 */
+					<0x00000098 0x0000000f>,
+					/* Reg: pinmux_shared_io_q4_4 */
+					<0x0000009c 0x0000000c>,
+					/* Reg: pinmux_shared_io_q4_5 */
+					<0x000000a0 0x0000000f>,
+					/* Reg: pinmux_shared_io_q4_6 */
+					<0x000000a4 0x0000000f>,
+					/* Reg: pinmux_shared_io_q4_7 */
+					<0x000000a8 0x0000000a>,
+					/* Reg: pinmux_shared_io_q4_8 */
+					<0x000000ac 0x0000000a>,
+					/* Reg: pinmux_shared_io_q4_9 */
+					<0x000000b0 0x0000000c>,
+					/* Reg: pinmux_shared_io_q4_10 */
+					<0x000000b4 0x0000000c>,
+					/* Reg: pinmux_shared_io_q4_11 */
+					<0x000000b8 0x0000000c>,
+					/* Reg: pinmux_shared_io_q4_12 */
+					<0x000000bc 0x0000000c>;
+			};
+
+			/*
+			 *	Address Block: soc_3v_io48_pin_mux_OCP_SLV.
+			 *	i_io48_pin_mux_dedicated_io_grp
+			 */
+			dedicated {
+				u-boot,dm-pre-reloc;
+				reg = <0xffd07200 0x00000200>;
+				pinctrl-single,register-width = <32>;
+				pinctrl-single,function-mask = <0x0000000f>;
+				pinctrl-single,pins =
+					/* Reg: pinmux_dedicated_io_4 */
+					<0x0000000c 0x00000008>,
+					/* Reg: pinmux_dedicated_io_5 */
+					<0x00000010 0x00000008>,
+					/* Reg: pinmux_dedicated_io_6 */
+					<0x00000014 0x00000008>,
+					/* Regi: pinmux_dedicated_io_7 */
+					<0x00000018 0x00000008>,
+					/* Reg: pinmux_dedicated_io_8 */
+					<0x0000001c 0x00000008>,
+					/* Reg: pinmux_dedicated_io_9 */
+					<0x00000020 0x00000008>,
+					/* Reg: pinmux_dedicated_io_10 */
+					<0x00000024 0x0000000a>,
+					/* Reg: pinmux_dedicated_io_11 */
+					<0x00000028 0x0000000a>,
+					/* Reg: pinmux_dedicated_io_12 */
+					<0x0000002c 0x00000008>,
+					/* Reg: pinmux_dedicated_io_13 */
+					<0x00000030 0x00000008>,
+					/* Reg: pinmux_dedicated_io_14 */
+					<0x00000034 0x00000008>,
+					/* Reg: pinmux_dedicated_io_15 */
+					<0x00000038 0x00000008>,
+					/* Reg: pinmux_dedicated_io_16 */
+					<0x0000003c 0x0000000d>,
+					/* Reg: pinmux_dedicated_io_17 */
+					<0x00000040 0x0000000d>;
+			};
+
+			/*
+			 * Address Block: soc_3v_io48_pin_mux_OCP_SLV.
+			 * i_io48_pin_mux_dedicated_io_grp
+			 */
+			dedicated_cfg {
+				u-boot,dm-pre-reloc;
+				reg = <0xffd07200 0x00000200>;
+				pinctrl-single,register-width = <32>;
+				pinctrl-single,function-mask = <0x003f3f3f>;
+				pinctrl-single,pins =
+					/* Reg: cfg_dedicated_io_bank */
+					<0x00000100 0x00000101>,
+					/* Reg: cfg_dedicated_io_1 */
+					<0x00000104 0x000b080a>,
+					/* Reg: cfg_dedicated_io_2 */
+					<0x00000108 0x000b080a>,
+					/* Reg: cfg_dedicated_io_3 */
+					<0x0000010c 0x000b080a>,
+					/* Reg: cfg_dedicated_io_4 */
+					<0x00000110 0x000a282a>,
+					/* Reg: cfg_dedicated_io_5 */
+					<0x00000114 0x000a282a>,
+					/* Reg: cfg_dedicated_io_6 */
+					<0x00000118 0x0008282a>,
+					/* Reg: cfg_dedicated_io_7 */
+					<0x0000011c 0x000a282a>,
+					/* Reg: cfg_dedicated_io_8 */
+					<0x00000120 0x000a282a>,
+					/* Reg: cfg_dedicated_io_9 */
+					<0x00000124 0x000a282a>,
+					/* Reg: cfg_dedicated_io_10 */
+					<0x00000128 0x00090000>,
+					/* Reg: cfg_dedicated_io_11 */
+					<0x0000012c 0x00090000>,
+					/* Reg: cfg_dedicated_io_12 */
+					<0x00000130 0x000b282a>,
+					/* Reg: cfg_dedicated_io_13 */
+					<0x00000134 0x000b282a>,
+					/* Reg: cfg_dedicated_io_14 */
+					<0x00000138 0x000b282a>,
+					/* Reg: cfg_dedicated_io_15 */
+					<0x0000013c 0x000b282a>,
+					/* Reg: cfg_dedicated_io_16 */
+					<0x00000140 0x0008282a>,
+					/* Reg: cfg_dedicated_io_17 */
+					<0x00000144 0x000a282a>;
+			};
+
+			/*
+			 *	Address Block: soc_3v_io48_pin_mux_OCP_SLV.
+			 *	i_io48_pin_mux_fpga_interface_grp
+			 */
+			fpga {
+				u-boot,dm-pre-reloc;
+				reg = <0xffd07400 0x00000100>;
+				pinctrl-single,register-width = <32>;
+				pinctrl-single,function-mask = <0x00000001>;
+				pinctrl-single,pins =
+					/* Reg: pinmux_emac0_usefpga */
+					<0x00000000 0x00000000>,
+					/* Reg: pinmux_emac1_usefpga */
+					<0x00000004 0x00000000>,
+					/* Reg: pinmux_emac2_usefpga */
+					<0x00000008 0x00000000>,
+					/* Reg: pinmux_i2c0_usefpga */
+					<0x0000000c 0x00000000>,
+					/* Reg: pinmux_i2c1_usefpga */
+					<0x00000010 0x00000000>,
+					/* Reg: pinmux_i2c_emac0_usefpga */
+					<0x00000014 0x00000000>,
+					/* Reg: pinmux_i2c_emac1_usefpga */
+					<0x00000018 0x00000000>,
+					/* Reg: pinmux_i2c_emac2_usefpga */
+					<0x0000001c 0x00000000>,
+					/* Reg: pinmux_nand_usefpga */
+					<0x00000020 0x00000000>,
+					/* Reg: pinmux_qspi_usefpga */
+					<0x00000024 0x00000000>,
+					/* Reg: pinmux_sdmmc_usefpga */
+					<0x00000028 0x00000000>,
+					/* Reg: pinmux_spim0_usefpga */
+					<0x0000002c 0x00000000>,
+					/* Reg: pinmux_spim1_usefpga */
+					<0x00000030 0x00000000>,
+					/* Reg: pinmux_spis0_usefpga */
+					<0x00000034 0x00000000>,
+					/* Reg: pinmux_spis1_usefpga */
+					<0x00000038 0x00000000>,
+					/* Reg: pinmux_uart0_usefpga */
+					<0x0000003c 0x00000000>,
+					/* Reg: pinmux_uart1_usefpga */
+					<0x00000040 0x00000000>;
+			};
+		};
+
+		i_noc: noc at 0xffd10000 {
+			compatible = "altr,socfpga-a10-noc";
+			reg = <0xffd10000 0x00008000>;
+			reg-names = "mpu_m0";
+
+			firewall {
+				/*
+				 * Driver setting: altera_arria10_soc_noc_arria10_uboot_driver.
+				 *					I_NOC.mpu_m0.
+				 *					noc_fw_ddr_mpu_fpga2sdram_ddr_scr.
+				 *					mpuregion0addr.base
+				 * Driver setting: altera_arria10_soc_noc_arria10_uboot_driver.
+				 *					I_NOC.mpu_m0.
+				 *					noc_fw_ddr_mpu_fpga2sdram_ddr_scr.
+				 *					mpuregion0addr.limit
+				 */
+				altr,mpu0 = <0x00000000 0x0000ffff>;
+				/*
+				 * Driver setting: altera_arria10_soc_noc_arria10_uboot_driver.
+				 *					I_NOC.mpu_m0.noc_fw_ddr_l3_ddr_scr.
+				 *					hpsregion0addr.base
+				 * Driver setting: altera_arria10_soc_noc_arria10_uboot_driver.
+				 *					I_NOC.mpu_m0.noc_fw_ddr_l3_ddr_scr.
+				 *					hpsregion0addr.limit
+				 */
+				altr,l3-0 = <0x00000000 0x0000ffff>;
+				/*
+				 * Driver setting: altera_arria10_soc_noc_arria10_uboot_driver.
+				 * 					I_NOC.mpu_m0.
+				 *					noc_fw_ddr_mpu_fpga2sdram_ddr_scr.
+				 *					fpga2sdram0region0addr.base
+				 * Driver setting: altera_arria10_soc_noc_arria10_uboot_driver.
+				 *					I_NOC.mpu_m0.
+				 *					noc_fw_ddr_mpu_fpga2sdram_ddr_scr.
+				 *					fpga2sdram0region0addr.limit
+				 */
+				altr,fpga2sdram0-0 = <0x00000000 0x0000ffff>;
+				/*
+				 * Driver setting: altera_arria10_soc_noc_arria10_uboot_driver.
+				 *					I_NOC.mpu_m0.
+				 *					noc_fw_ddr_mpu_fpga2sdram_ddr_scr.
+				 *					fpga2sdram1region0addr.base
+				 * Driver setting: altera_arria10_soc_noc_arria10_uboot_driver.
+				 *					I_NOC.mpu_m0.
+				 *					noc_fw_ddr_mpu_fpga2sdram_ddr_scr.
+				 *					fpga2sdram1region0addr.limit
+				 */
+				altr,fpga2sdram1-0 = <0x00000000 0x0000ffff>;
+				/*
+				 * Driver setting: altera_arria10_soc_noc_arria10_uboot_driver.
+				 *					I_NOC.mpu_m0.
+				 *					noc_fw_ddr_mpu_fpga2sdram_ddr_scr.
+				 *					fpga2sdram2region0addr.base
+				 * Driver setting: altera_arria10_soc_noc_arria10_uboot_driver.
+				 *					I_NOC.mpu_m0.
+				 *					noc_fw_ddr_mpu_fpga2sdram_ddr_scr.
+				 *					fpga2sdram2region0addr.limit
+				 */
+				altr,fpga2sdram2-0 = <0x00000000 0x0000ffff>;
+			};
+		};
+
+		hps_fpgabridge0: fpgabridge at 0 {
+			compatible = "altr,socfpga-hps2fpga-bridge";
+			altr,init-val = <1>;
+		};
+
+		hps_fpgabridge1: fpgabridge at 1 {
+			compatible = "altr,socfpga-lwhps2fpga-bridge";
+			altr,init-val = <1>;
+		};
+
+		hps_fpgabridge2: fpgabridge at 2 {
+			compatible = "altr,socfpga-fpga2hps-bridge";
+			altr,init-val = <1>;
+		};
+
+		hps_fpgabridge3: fpgabridge at 3 {
+			compatible = "altr,socfpga-fpga2sdram0-bridge";
+			altr,init-val = <1>;
+		};
+
+		hps_fpgabridge4: fpgabridge at 4 {
+			compatible = "altr,socfpga-fpga2sdram1-bridge";
+			altr,init-val = <0>;
+		};
+
+		hps_fpgabridge5: fpgabridge at 5 {
+			compatible = "altr,socfpga-fpga2sdram2-bridge";
+			altr,init-val = <1>;
+		};
+	};
+};
-- 
1.7.7.4

[U-Boot] [v3 20/30] arm: socfpga: arria10: Enable SPL for Arria 10

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

This patch enables SPL build and implementation for Arria 10.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
Changes for V3
- no changes.
Changes for V2
- Commit messages changed.
---
 arch/arm/Kconfig |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 80c5992..0ed36cd 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -561,9 +561,9 @@ config ARCH_SNAPDRAGON
 config ARCH_SOCFPGA
 	bool "Altera SOCFPGA family"
 	select CPU_V7
-	select SUPPORT_SPL if !TARGET_SOCFPGA_ARRIA10
+	select SUPPORT_SPL
 	select OF_CONTROL
-	select SPL_OF_CONTROL if !TARGET_SOCFPGA_ARRIA10
+	select SPL_OF_CONTROL
 	select DM
 	select DM_SPI_FLASH
 	select DM_SPI
-- 
1.7.7.4

[U-Boot] [v3 21/30] arm: socfpga: arria10: Enhanced socfpga_arria10_defconfig to support SPL

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

Enhanced defconfig file for Arria10 to enable SPL build and supporting
device tree build for SDMMC.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
Changes for V3
- no changes
Changes for V2
- Removed boot header info setup since it already fixed in mainline
---
 configs/socfpga_arria10_defconfig |   18 +++++++++++++-----
 1 files changed, 13 insertions(+), 5 deletions(-)

diff --git a/configs/socfpga_arria10_defconfig b/configs/socfpga_arria10_defconfig
index 422261b..755bb66 100644
--- a/configs/socfpga_arria10_defconfig
+++ b/configs/socfpga_arria10_defconfig
@@ -3,14 +3,22 @@ CONFIG_ARCH_SOCFPGA=y
 CONFIG_TARGET_SOCFPGA_ARRIA10=y
 CONFIG_DM_GPIO=y
 CONFIG_TARGET_SOCFPGA_ARRIA10_SOCDK=y
-CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria10_socdk"
+CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria10_socdk_sdmmc"
+CONFIG_IDENT_STRING="socfpga_arria10"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_DWAPB_GPIO=y
-CONFIG_DM_ETH=y
-CONFIG_ETH_DESIGNWARE=y
 CONFIG_SYS_NS16550=y
-CONFIG_CADENCE_QSPI=y
-CONFIG_DESIGNWARE_SPI=y
 CONFIG_DM_MMC=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_CMD_MMC=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_SPL=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_SIMPLE_BUS=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_OF_LIBFDT=y
+CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y
-- 
1.7.7.4

[U-Boot] [v3 21/30] arm: socfpga: arria10: Enhanced socfpga_arria10_defconfig to support SPL

[Dinh Nguyen]

On 01/06/2017 05:19 AM, Chee Tien Fong wrote:
> From: Tien Fong Chee <tien.fong.chee@intel.com>
>
> Enhanced defconfig file for Arria10 to enable SPL build and supporting
> device tree build for SDMMC.
>
> Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
> Cc: Marek Vasut <marex@denx.de>
> Cc: Dinh Nguyen <dinguyen@kernel.org>
> Cc: Chin Liang See <chin.liang.see@intel.com>
> Cc: Tien Fong <skywindctf@gmail.com>
> ---
> Changes for V3
> - no changes
> Changes for V2
> - Removed boot header info setup since it already fixed in mainline
> ---

You can probably just roll this patch together with the previous patch 
for socfpga_arria10_defconfig "[v3 07/30] arm: socfpga: arria10: add
socfpga_arria10_defconfig"

Dinh

[U-Boot] [v3 21/30] arm: socfpga: arria10: Enhanced socfpga_arria10_defconfig to support SPL

[Chee, Tien Fong]

On Jum, 2017-01-06 at 12:12 -0600, Dinh Nguyen wrote:
> 
> On 01/06/2017 05:19 AM, Chee Tien Fong wrote:
> > 
> > From: Tien Fong Chee <tien.fong.chee@intel.com>
> > 
> > Enhanced defconfig file for Arria10 to enable SPL build and
> > supporting
> > device tree build for SDMMC.
> > 
> > Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
> > Cc: Marek Vasut <marex@denx.de>
> > Cc: Dinh Nguyen <dinguyen@kernel.org>
> > Cc: Chin Liang See <chin.liang.see@intel.com>
> > Cc: Tien Fong <skywindctf@gmail.com>
> > ---
> > Changes for V3
> > - no changes
> > Changes for V2
> > - Removed boot header info setup since it already fixed in mainline
> > ---
> You can probably just roll this patch together with the previous
> patch?
> for socfpga_arria10_defconfig "[v3 07/30] arm: socfpga: arria10: add
> socfpga_arria10_defconfig"
> 
> Dinh

Okay, noted.

[U-Boot] [v3 22/30] arm: socfpga: arria10: Added clock manager and pin mux compat macro

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

These compat macros would be used by clock manager and pin mux drivers
to look the required HW info from DTS for hardware initialization.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
Changes for V3
- no changes
Changes for V2
- Added only compat strings with matching drivers in this series patches
---
 include/fdtdec.h |    8 ++++++++
 lib/fdtdec.c     |    8 ++++++++
 2 files changed, 16 insertions(+), 0 deletions(-)

diff --git a/include/fdtdec.h b/include/fdtdec.h
index d074478..73e3a46 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -155,6 +155,14 @@ enum fdt_compat_id {
 	COMPAT_INTEL_BAYTRAIL_FSP_MDP,	/* Intel FSP memory-down params */
 	COMPAT_INTEL_IVYBRIDGE_FSP,	/* Intel Ivy Bridge FSP */
 	COMPAT_SUNXI_NAND,		/* SUNXI NAND controller */
+	COMPAT_ALTERA_SOCFPGA_CLK,	/* SoCFPGA Clock initialization */
+	COMPAT_ALTERA_SOCFPGA_PINCTRL_SINGLE,	/* pinctrl-single */
+	COMPAT_ALTERA_SOCFPGA_H2F_BRG,          /* Arria10 hps2fpga bridge */
+	COMPAT_ALTERA_SOCFPGA_LWH2F_BRG,        /* Arria10 lwhps2fpga bridge */
+	COMPAT_ALTERA_SOCFPGA_F2H_BRG,          /* Arria10 fpga2hps bridge */
+	COMPAT_ALTERA_SOCFPGA_F2SDR0,           /* Arria10 fpga2SDRAM0 bridge */
+	COMPAT_ALTERA_SOCFPGA_F2SDR1,           /* Arria10 fpga2SDRAM1 bridge */
+	COMPAT_ALTERA_SOCFPGA_F2SDR2,           /* Arria10 fpga2SDRAM2 bridge */
 
 	COMPAT_COUNT,
 };
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index 81f47ef..ebe4a9a 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -66,6 +66,14 @@ static const char * const compat_names[COMPAT_COUNT] = {
 	COMPAT(INTEL_BAYTRAIL_FSP_MDP, "intel,baytrail-fsp-mdp"),
 	COMPAT(INTEL_IVYBRIDGE_FSP, "intel,ivybridge-fsp"),
 	COMPAT(COMPAT_SUNXI_NAND, "allwinner,sun4i-a10-nand"),
+	COMPAT(ALTERA_SOCFPGA_CLK, "altr,clk-mgr"),
+	COMPAT(ALTERA_SOCFPGA_PINCTRL_SINGLE, "pinctrl-single"),
+	COMPAT(ALTERA_SOCFPGA_H2F_BRG, "altr,socfpga-hps2fpga-bridge"),
+	COMPAT(ALTERA_SOCFPGA_LWH2F_BRG, "altr,socfpga-lwhps2fpga-bridge"),
+	COMPAT(ALTERA_SOCFPGA_F2H_BRG, "altr,socfpga-fpga2hps-bridge"),
+	COMPAT(ALTERA_SOCFPGA_F2SDR0, "altr,socfpga-fpga2sdram0-bridge"),
+	COMPAT(ALTERA_SOCFPGA_F2SDR1, "altr,socfpga-fpga2sdram1-bridge"),
+	COMPAT(ALTERA_SOCFPGA_F2SDR2, "altr,socfpga-fpga2sdram2-bridge"),
 };
 
 const char *fdtdec_get_compatible(enum fdt_compat_id id)
-- 
1.7.7.4

[U-Boot] [v3 23/30] arm: socfpga: arria10: Added some hardware base address for Arria 10

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
Changes for v3
- no changes
changes for v2
- Separate patch for adding some HW base address for Arria 10.
---
 arch/arm/mach-socfpga/include/mach/base_addr_a10.h |    5 ++++-
 1 files changed, 4 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-socfpga/include/mach/base_addr_a10.h b/arch/arm/mach-socfpga/include/mach/base_addr_a10.h
index 902c321..2d66580 100644
--- a/arch/arm/mach-socfpga/include/mach/base_addr_a10.h
+++ b/arch/arm/mach-socfpga/include/mach/base_addr_a10.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2014 Altera Corporation <www.altera.com>
+ * Copyright (C) 2014-2016 Altera Corporation <www.altera.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -36,10 +36,13 @@
 #define SOCFPGA_ECC_OCRAM_ADDRESS		0xff8c3000
 #define SOCFPGA_UART0_ADDRESS			0xffc02000
 #define SOCFPGA_OSC1TIMER0_ADDRESS		0xffd00000
+#define SOCFPGA_OSC1TIMER1_ADDRESS		0xffd00100
 #define SOCFPGA_CLKMGR_ADDRESS			0xffd04000
 #define SOCFPGA_RSTMGR_ADDRESS			0xffd05000
 
 #define SOCFPGA_SDR_ADDRESS			0xffcfb000
+#define SOCFPGA_NOC_L4_PRIV_FLT_OFST        	0xffd11000
+#define SOCFPGA_NOC_FW_H2F_SCR_OFST		0xffd13500
 #define SOCFPGA_SDR_SCHEDULER_ADDRESS		0xffd12400
 #define SOCFPGA_SDR_FIREWALL_OCRAM_ADDRESS	0xffd13200
 #define SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS	0xffd13300
-- 
1.7.7.4

[U-Boot] [v3 24/30] arm: socfpga: arria10: Added support for Arria 10 socdk

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
Changes for V3
- no changes
Changes for V2
- Separate patch, reuse socfpga_common.h
---
 arch/arm/mach-socfpga/system_manager.c  |    4 ++-
 drivers/fpga/socfpga.c                  |    7 +++-
 include/configs/socfpga_arria10_socdk.h |   56 +++++++++++++++++++------------
 include/configs/socfpga_common.h        |   33 ++++++++++++++++--
 4 files changed, 71 insertions(+), 29 deletions(-)

diff --git a/arch/arm/mach-socfpga/system_manager.c b/arch/arm/mach-socfpga/system_manager.c
index 9e1c3fd..e1f0082 100644
--- a/arch/arm/mach-socfpga/system_manager.c
+++ b/arch/arm/mach-socfpga/system_manager.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ * Copyright (C) 2013-2016 Altera Corporation <www.altera.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -11,8 +11,10 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 static struct socfpga_system_manager *sysmgr_regs =
 	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
+#endif
 
 /*
  * Populate the value for SYSMGR.FPGAINTF.MODULE based on pinmux setting.
diff --git a/drivers/fpga/socfpga.c b/drivers/fpga/socfpga.c
index bfefafd..7fd922e 100644
--- a/drivers/fpga/socfpga.c
+++ b/drivers/fpga/socfpga.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ * Copyright (C) 2012-2016 Altera Corporation <www.altera.com>
  * All rights reserved.
  *
  * SPDX-License-Identifier:	BSD-3-Clause
@@ -19,8 +19,10 @@ DECLARE_GLOBAL_DATA_PTR;
 
 static struct socfpga_fpga_manager *fpgamgr_regs =
 	(struct socfpga_fpga_manager *)SOCFPGA_FPGAMGRREGS_ADDRESS;
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 static struct socfpga_system_manager *sysmgr_regs =
 	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
+#endif
 
 /* Set CD ratio */
 static void fpgamgr_set_cd_ratio(unsigned long ratio)
@@ -267,9 +269,10 @@ int socfpga_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size)
 	}
 
 	/* Prior programming the FPGA, all bridges need to be shut off */
-
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 	/* Disable all signals from hps peripheral controller to fpga */
 	writel(0, &sysmgr_regs->fpgaintfgrp_module);
+#endif
 
 	/* Disable all signals from FPGA to HPS SDRAM */
 #define SDR_CTRLGRP_FPGAPORTRST_ADDRESS	0x5080
diff --git a/include/configs/socfpga_arria10_socdk.h b/include/configs/socfpga_arria10_socdk.h
index 577f60f..105c4c0 100644
--- a/include/configs/socfpga_arria10_socdk.h
+++ b/include/configs/socfpga_arria10_socdk.h
@@ -1,5 +1,5 @@
 /*
- *  Copyright (C) 2015 Altera Corporation <www.altera.com>
+ *  Copyright (C) 2015-2016 Altera Corporation <www.altera.com>
  *
  * SPDX-License-Identifier:	GPL-2.0
  */
@@ -8,31 +8,20 @@
 #define __CONFIG_SOCFGPA_ARRIA10_H__
 
 #include <asm/arch/base_addr_a10.h>
+
 /* U-Boot Commands */
-#define CONFIG_SYS_NO_FLASH
 #define CONFIG_DOS_PARTITION
 #define CONFIG_FAT_WRITE
 #define CONFIG_HW_WATCHDOG
 
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EXT4
 #define CONFIG_CMD_EXT4_WRITE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
 #define CONFIG_CMD_GREPENV
-#define CONFIG_CMD_MMC
 #define CONFIG_CMD_PING
 
-/*
- * Memory configurations
- */
-#define PHYS_SDRAM_1_SIZE		0x2000000
-
 /* Booting Linux */
-#define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTFILE		"zImage"
 #define CONFIG_BOOTARGS		"console=ttyS0," __stringify(CONFIG_BAUDRATE)
 #define CONFIG_BOOTCOMMAND      "run mmcload; run mmcboot"
@@ -40,24 +29,30 @@
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 
 /*
- * Display CPU and Board Info
+ * U-Boot general configurations
+ */
+/* Cache options */
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_CMD_CACHE
+
+/*
+ * U-Boot console configurations
  */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_DISPLAY_BOARDINFO_LATE
+#define CONFIG_DOS_PARTITION
+
+/* Memory configurations  */
+#define PHYS_SDRAM_1_SIZE		0x80000000
 
 /* Ethernet on SoC (EMAC) */
 #if defined(CONFIG_CMD_NET)
-
-/* PHY */
 #define CONFIG_PHY_MICREL
 #define CONFIG_PHY_MICREL_KSZ9031
-
 #endif
 
+/*
+ * U-Boot environment configurations
+ */
 #define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV		0/* device 0 */
-#define CONFIG_ENV_OFFSET		512/* just after the MBR */
 
 /*
  * arguments passed to the bootz command. The value of
@@ -89,6 +84,23 @@
 		" root=${qspiroot} rw rootfstype=${qspirootfstype};"\
 		"bootm ${loadaddr} - ${fdt_addr}\0"
 
+/*
+ * Serial / UART configurations
+ */
+#define CONFIG_SYS_NS16550_MEM32
+#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200}
+
+/*
+ * L4 OSC1 Timer 0
+ */
+/* reload value when timer count to zero */
+#define TIMER_LOAD_VAL			0xFFFFFFFF
+
+/*
+ * Flash configurations
+ */
+#define CONFIG_SYS_MAX_FLASH_BANKS     1
+
 /* The rest of the configuration is shared */
 #include <configs/socfpga_common.h>
 #endif	/* __CONFIG_H */
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index bbbde1e..fde9a51 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -15,7 +15,9 @@
  * High level configuration
  */
 #define CONFIG_DISPLAY_BOARDINFO_LATE
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 #define CONFIG_ARCH_MISC_INIT
+#endif
 #define CONFIG_ARCH_EARLY_INIT_R
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_CLOCKS
@@ -37,9 +39,13 @@
 #define CONFIG_SYS_MALLOC_LEN		(64 * 1024 * 1024)
 #define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_1
 #define CONFIG_SYS_MEMTEST_END		PHYS_SDRAM_1_SIZE
-
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 #define CONFIG_SYS_INIT_RAM_ADDR	0xFFFF0000
 #define CONFIG_SYS_INIT_RAM_SIZE	0x10000
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#define CONFIG_SYS_INIT_RAM_ADDR	0xFFE00000
+#define CONFIG_SYS_INIT_RAM_SIZE	0x40000 /* 256KB */
+#endif
 #define CONFIG_SYS_INIT_SP_OFFSET		\
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR			\
@@ -213,11 +219,14 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
  */
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	-4
-#define CONFIG_SYS_NS16550_COM1		SOCFPGA_UART0_ADDRESS
 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
 #define CONFIG_SYS_NS16550_CLK		1000000
-#else
+#elif defined(CONFIG_TARGET_SOCFPGA_GEN5)
+#define CONFIG_SYS_NS16550_COM1		SOCFPGA_UART0_ADDRESS
 #define CONFIG_SYS_NS16550_CLK		100000000
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#define CONFIG_SYS_NS16550_COM1        SOCFPGA_UART1_ADDRESS
+#define CONFIG_SYS_NS16550_CLK         	50000000
 #endif
 #define CONFIG_CONS_INDEX		1
 #define CONFIG_BAUDRATE			115200
@@ -295,23 +304,39 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 /*
  * SPL
  *
- * SRAM Memory layout:
+ * SRAM Memory layout(TARGET_SOCFPGA_GEN5):
  *
  * 0xFFFF_0000 ...... Start of SRAM
  * 0xFFFF_xxxx ...... Top of stack (grows down)
  * 0xFFFF_yyyy ...... Malloc area
  * 0xFFFF_zzzz ...... Global Data
  * 0xFFFF_FF00 ...... End of SRAM
+ *
+ * SRAM Memory layout(TARGET_SOCFPGA_ARRIA10):
+ *
+ * 0xFFE0_0000 ...... Start of SRAM
+ * 0xFFE0_xxxx ...... Top of stack (grows down)
+ * 0xFFE0_yyyy ...... Malloc area
+ * 0xFFE0_zzzz ...... Global Data
+ * 0xFFE3_FFFF ...... End of SRAM
  */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_RAM_DEVICE
 #define CONFIG_SPL_TEXT_BASE		CONFIG_SYS_INIT_RAM_ADDR
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 #define CONFIG_SPL_MAX_SIZE		(64 * 1024)
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#define CONFIG_SPL_MAX_SIZE		CONFIG_SYS_INIT_RAM_SIZE
+#endif
 
 /* SPL SDMMC boot support */
 #ifdef CONFIG_SPL_MMC_SUPPORT
 #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	2
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
+#endif
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot-dtb.img"
 #else
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION	1
-- 
1.7.7.4

[U-Boot] [v3 25/30] arm: socfpga: arria10: Added drivers for Arria10 Reset Manager

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

Drivers for reset manager is restructured such that common functions,
gen5 drivers and Arria10 drivers are moved to reset_manager.c,
reset_manager_gen5.c and reset_manager_arria10.c respectively.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
Changes for V3
- no changes
Changes for V2
- Reverted license changes, removing extern and volatile declaration
---
 arch/arm/mach-socfpga/Makefile                     |   16 +-
 arch/arm/mach-socfpga/include/mach/reset_manager.h |  155 ++++++--
 arch/arm/mach-socfpga/reset_manager.c              |  112 +------
 arch/arm/mach-socfpga/reset_manager_arria10.c      |  407 ++++++++++++++++++++
 .../{reset_manager.c => reset_manager_gen5.c}      |   94 ++---
 5 files changed, 570 insertions(+), 214 deletions(-)
 create mode 100644 arch/arm/mach-socfpga/reset_manager_arria10.c
 copy arch/arm/mach-socfpga/{reset_manager.c => reset_manager_gen5.c} (58%)

diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
index 809cd47..b8fcf6e 100644
--- a/arch/arm/mach-socfpga/Makefile
+++ b/arch/arm/mach-socfpga/Makefile
@@ -2,21 +2,27 @@
 # (C) Copyright 2000-2003
 # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
 #
-# Copyright (C) 2012 Altera Corporation <www.altera.com>
+# Copyright (C) 2012-2016 Altera Corporation <www.altera.com>
 #
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
 obj-y	+= misc.o timer.o reset_manager.o system_manager.o clock_manager.o \
 	   fpga_manager.o board.o
+obj-$(CONFIG_TARGET_SOCFPGA_ARRIA10) += reset_manager_arria10.o
+obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += scan_manager.o wrap_pll_config.o \
+				reset_manager_gen5.o
 
-obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o
+obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += freeze_controller.o wrap_iocsr_config.o \
+				wrap_pinmux_config.o wrap_sdram_config.o
+endif
 
+ifdef CONFIG_TARGET_SOCFPGA_GEN5
 # QTS-generated config file wrappers
-obj-$(CONFIG_TARGET_SOCFPGA_GEN5)	+= scan_manager.o wrap_pll_config.o
-obj-$(CONFIG_SPL_BUILD) += wrap_iocsr_config.o wrap_pinmux_config.o	\
-			   wrap_sdram_config.o
 CFLAGS_wrap_iocsr_config.o	+= -I$(srctree)/board/$(BOARDDIR)
 CFLAGS_wrap_pinmux_config.o	+= -I$(srctree)/board/$(BOARDDIR)
 CFLAGS_wrap_pll_config.o	+= -I$(srctree)/board/$(BOARDDIR)
 CFLAGS_wrap_sdram_config.o	+= -I$(srctree)/board/$(BOARDDIR)
+endif
diff --git a/arch/arm/mach-socfpga/include/mach/reset_manager.h b/arch/arm/mach-socfpga/include/mach/reset_manager.h
index 6225118..13f9731 100644
--- a/arch/arm/mach-socfpga/include/mach/reset_manager.h
+++ b/arch/arm/mach-socfpga/include/mach/reset_manager.h
@@ -1,5 +1,5 @@
 /*
- *  Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *  Copyright (C) 2012-2016 Altera Corporation <www.altera.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -7,15 +7,27 @@
 #ifndef	_RESET_MANAGER_H_
 #define	_RESET_MANAGER_H_
 
+/* Common function prototypes */
 void reset_cpu(ulong addr);
-void reset_deassert_peripherals_handoff(void);
-
 void socfpga_bridges_reset(int enable);
-
 void socfpga_per_reset(u32 reset, int set);
 void socfpga_per_reset_all(void);
 
 #if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+void reset_deassert_peripherals_handoff(void);
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+void watchdog_disable(void);
+void reset_deassert_noc_ddr_scheduler(void);
+int is_wdt_in_reset(void);
+void emac_manage_reset(ulong emacbase, uint state);
+int reset_deassert_bridges_handoff(void);
+void reset_assert_fpga_connected_peripherals(void);
+void reset_deassert_osc1wd0(void);
+void reset_assert_uart(void);
+void reset_deassert_uart(void);
+#endif
+
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 struct socfpga_reset_manager {
 	u32	status;
 	u32	ctrl;
@@ -29,40 +41,40 @@ struct socfpga_reset_manager {
 	u32	padding2[12];
 	u32	tstscratch;
 };
-#else
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
 struct socfpga_reset_manager {
-	u32	stat;
-	u32	ramstat;
-	u32	miscstat;
-	u32	ctrl;
-	u32	hdsken;
-	u32	hdskreq;
-	u32	hdskack;
-	u32	counts;
-	u32	mpu_mod_reset;
-	u32	per_mod_reset;	/* stated as per0_mod_reset in A10 datasheet */
-	u32	per2_mod_reset;	/* stated as per1_mod_reset in A10 datasheet */
-	u32	brg_mod_reset;
-	u32	misc_mod_reset;	/* stated as sys_mod_reset in A10 datasheet */
-	u32	coldmodrst;
-	u32	nrstmodrst;
-	u32	dbgmodrst;
-	u32	mpuwarmmask;
-	u32	per0warmmask;
-	u32	per1warmmask;
-	u32	brgwarmmask;
-	u32	syswarmmask;
-	u32	nrstwarmmask;
-	u32	l3warmmask;
-	u32	tststa;
-	u32	tstscratch;
-	u32	hdsktimeout;
-	u32	hmcintr;
-	u32	hmcintren;
-	u32	hmcintrens;
-	u32	hmcintrenr;
-	u32	hmcgpout;
-	u32	hmcgpin;
+	uint32_t  stat;
+	uint32_t  ramstat;
+	uint32_t  miscstat;
+	uint32_t  ctrl;
+	uint32_t  hdsken;
+	uint32_t  hdskreq;
+	uint32_t  hdskack;
+	uint32_t  counts;
+	uint32_t  mpumodrst;
+	uint32_t  per0modrst;
+	uint32_t  per1modrst;
+	uint32_t  brgmodrst;
+	uint32_t  sysmodrst;
+	uint32_t  coldmodrst;
+	uint32_t  nrstmodrst;
+	uint32_t  dbgmodrst;
+	uint32_t  mpuwarmmask;
+	uint32_t  per0warmmask;
+	uint32_t  per1warmmask;
+	uint32_t  brgwarmmask;
+	uint32_t  syswarmmask;
+	uint32_t  nrstwarmmask;
+	uint32_t  l3warmmask;
+	uint32_t  tststa;
+	uint32_t  tstscratch;
+	uint32_t  hdsktimeout;
+	uint32_t  hmcintr;
+	uint32_t  hmcintren;
+	uint32_t  hmcintrens;
+	uint32_t  hmcintrenr;
+	uint32_t  hmcgpout;
+	uint32_t  hmcgpin;
 };
 #endif
 
@@ -113,7 +125,7 @@ struct socfpga_reset_manager {
 #define RSTMGR_SDMMC		RSTMGR_DEFINE(1, 22)
 #define RSTMGR_DMA		RSTMGR_DEFINE(1, 28)
 #define RSTMGR_SDR		RSTMGR_DEFINE(1, 29)
-#else
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
 /*
  * SocFPGA Arria10 reset IDs, bank mapping is as follows:
  * 0 ... mpumodrst
@@ -144,4 +156,71 @@ struct socfpga_reset_manager {
 /* Create a human-readable reference to SoCFPGA reset. */
 #define SOCFPGA_RESET(_name)	RSTMGR_##_name
 
+/* Create a human-readable reference to SoCFPGA reset. */
+#define SOCFPGA_RESET(_name)	RSTMGR_##_name
+
+#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#define ALT_RSTMGR_CTL_SWWARMRSTREQ_SET_MSK	0x00000002
+#define ALT_RSTMGR_PER0MODRST_EMAC0_SET_MSK	0x00000001
+#define ALT_RSTMGR_PER0MODRST_EMAC1_SET_MSK	0x00000002
+#define ALT_RSTMGR_PER0MODRST_EMAC2_SET_MSK	0x00000004
+#define ALT_RSTMGR_PER0MODRST_USB0_SET_MSK	0x00000008
+#define ALT_RSTMGR_PER0MODRST_USB1_SET_MSK	0x00000010
+#define ALT_RSTMGR_PER0MODRST_NAND_SET_MSK	0x00000020
+#define ALT_RSTMGR_PER0MODRST_QSPI_SET_MSK	0x00000040
+#define ALT_RSTMGR_PER0MODRST_SDMMC_SET_MSK	0x00000080
+#define ALT_RSTMGR_PER0MODRST_EMACECC0_SET_MSK	0x00000100
+#define ALT_RSTMGR_PER0MODRST_EMACECC1_SET_MSK	0x00000200
+#define ALT_RSTMGR_PER0MODRST_EMACECC2_SET_MSK	0x00000400
+#define ALT_RSTMGR_PER0MODRST_USBECC0_SET_MSK	0x00000800
+#define ALT_RSTMGR_PER0MODRST_USBECC1_SET_MSK	0x00001000
+#define ALT_RSTMGR_PER0MODRST_NANDECC_SET_MSK	0x00002000
+#define ALT_RSTMGR_PER0MODRST_QSPIECC_SET_MSK	0x00004000
+#define ALT_RSTMGR_PER0MODRST_SDMMCECC_SET_MSK	0x00008000
+#define ALT_RSTMGR_PER0MODRST_DMA_SET_MSK	0x00010000
+#define ALT_RSTMGR_PER0MODRST_SPIM0_SET_MSK	0x00020000
+#define ALT_RSTMGR_PER0MODRST_SPIM1_SET_MSK	0x00040000
+#define ALT_RSTMGR_PER0MODRST_SPIS0_SET_MSK	0x00080000
+#define ALT_RSTMGR_PER0MODRST_SPIS1_SET_MSK	0x00100000
+#define ALT_RSTMGR_PER0MODRST_DMAECC_SET_MSK	0x00200000
+#define ALT_RSTMGR_PER0MODRST_EMACPTP_SET_MSK	0x00400000
+#define ALT_RSTMGR_PER0MODRST_DMAIF0_SET_MSK	0x01000000
+#define ALT_RSTMGR_PER0MODRST_DMAIF1_SET_MSK	0x02000000
+#define ALT_RSTMGR_PER0MODRST_DMAIF2_SET_MSK	0x04000000
+#define ALT_RSTMGR_PER0MODRST_DMAIF3_SET_MSK	0x08000000
+#define ALT_RSTMGR_PER0MODRST_DMAIF4_SET_MSK	0x10000000
+#define ALT_RSTMGR_PER0MODRST_DMAIF5_SET_MSK	0x20000000
+#define ALT_RSTMGR_PER0MODRST_DMAIF6_SET_MSK	0x40000000
+#define ALT_RSTMGR_PER0MODRST_DMAIF7_SET_MSK	0x80000000
+
+#define ALT_RSTMGR_PER1MODRST_WD0_SET_MSK	0x00000001
+#define ALT_RSTMGR_PER1MODRST_WD1_SET_MSK	0x00000002
+#define ALT_RSTMGR_PER1MODRST_L4SYSTMR0_SET_MSK	0x00000004
+#define ALT_RSTMGR_PER1MODRST_L4SYSTMR1_SET_MSK	0x00000008
+#define ALT_RSTMGR_PER1MODRST_SPTMR0_SET_MSK	0x00000010
+#define ALT_RSTMGR_PER1MODRST_SPTMR1_SET_MSK	0x00000020
+#define ALT_RSTMGR_PER1MODRST_I2C0_SET_MSK	0x00000100
+#define ALT_RSTMGR_PER1MODRST_I2C1_SET_MSK	0x00000200
+#define ALT_RSTMGR_PER1MODRST_I2C2_SET_MSK	0x00000400
+#define ALT_RSTMGR_PER1MODRST_I2C3_SET_MSK	0x00000800
+#define ALT_RSTMGR_PER1MODRST_I2C4_SET_MSK	0x00001000
+#define ALT_RSTMGR_PER1MODRST_UART0_SET_MSK	0x00010000
+#define ALT_RSTMGR_PER1MODRST_UART1_SET_MSK	0x00020000
+#define ALT_RSTMGR_PER1MODRST_GPIO0_SET_MSK	0x01000000
+#define ALT_RSTMGR_PER1MODRST_GPIO1_SET_MSK	0x02000000
+#define ALT_RSTMGR_PER1MODRST_GPIO2_SET_MSK	0x04000000
+
+#define ALT_RSTMGR_BRGMODRST_H2F_SET_MSK	0x00000001
+#define ALT_RSTMGR_BRGMODRST_LWH2F_SET_MSK	0x00000002
+#define ALT_RSTMGR_BRGMODRST_F2H_SET_MSK	0x00000004
+#define ALT_RSTMGR_BRGMODRST_F2SSDRAM0_SET_MSK	0x00000008
+#define ALT_RSTMGR_BRGMODRST_F2SSDRAM1_SET_MSK	0x00000010
+#define ALT_RSTMGR_BRGMODRST_F2SSDRAM2_SET_MSK	0x00000020
+#define ALT_RSTMGR_BRGMODRST_DDRSCH_SET_MSK	0x00000040
+
+#define ALT_RSTMGR_HDSKEN_SDRSELFREFEN_SET_MSK	0x00000001
+#define ALT_RSTMGR_HDSKEN_FPGAMGRHSEN_SET_MSK	0x00000002
+#define ALT_RSTMGR_HDSKEN_FPGAHSEN_SET_MSK	0x00000004
+#define ALT_RSTMGR_HDSKEN_ETRSTALLEN_SET_MSK	0x00000008
+#endif
 #endif /* _RESET_MANAGER_H_ */
diff --git a/arch/arm/mach-socfpga/reset_manager.c b/arch/arm/mach-socfpga/reset_manager.c
index d0ff6c4..cc370dc 100644
--- a/arch/arm/mach-socfpga/reset_manager.c
+++ b/arch/arm/mach-socfpga/reset_manager.c
@@ -1,5 +1,5 @@
 /*
- *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *  Copyright (C) 2013-2016 Altera Corporation <www.altera.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -7,71 +7,12 @@
 
 #include <common.h>
 #include <asm/io.h>
-#include <asm/arch/fpga_manager.h>
 #include <asm/arch/reset_manager.h>
-#include <asm/arch/system_manager.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
 static const struct socfpga_reset_manager *reset_manager_base =
 		(void *)SOCFPGA_RSTMGR_ADDRESS;
-static struct socfpga_system_manager *sysmgr_regs =
-	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
-
-/*
- * Assert or de-assert SoCFPGA reset manager reset.
- */
-void socfpga_per_reset(u32 reset, int set)
-{
-	const void *reg;
-
-	if (RSTMGR_BANK(reset) == 0)
-		reg = &reset_manager_base->mpu_mod_reset;
-	else if (RSTMGR_BANK(reset) == 1)
-		reg = &reset_manager_base->per_mod_reset;
-	else if (RSTMGR_BANK(reset) == 2)
-		reg = &reset_manager_base->per2_mod_reset;
-	else if (RSTMGR_BANK(reset) == 3)
-		reg = &reset_manager_base->brg_mod_reset;
-	else if (RSTMGR_BANK(reset) == 4)
-		reg = &reset_manager_base->misc_mod_reset;
-	else	/* Invalid reset register, do nothing */
-		return;
-
-	if (set)
-		setbits_le32(reg, 1 << RSTMGR_RESET(reset));
-	else
-		clrbits_le32(reg, 1 << RSTMGR_RESET(reset));
-}
-
-/*
- * Assert reset on every peripheral but L4WD0.
- * Watchdog must be kept intact to prevent glitches
- * and/or hangs.
- * For the Arria10, we disable all the peripherals except L4 watchdog0,
- * L4 Timer 0, and ECC.
- */
-void socfpga_per_reset_all(void)
-{
-#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
-	const u32 l4wd0 = 1 << RSTMGR_RESET(SOCFPGA_RESET(L4WD0));
-
-	writel(~l4wd0, &reset_manager_base->per_mod_reset);
-	writel(0xffffffff, &reset_manager_base->per2_mod_reset);
-#else
-	const u32 l4wd0 = (1 << RSTMGR_RESET(SOCFPGA_RESET(L4WD0)) |
-			(1 << RSTMGR_RESET(SOCFPGA_RESET(L4SYSTIMER0))));
-
-	unsigned mask_ecc_ocp = 0x0000FF00;
-
-	/* disable all components except ECC_OCP, L4 Timer0 and L4 WD0 */
-	writel(~l4wd0, &reset_manager_base->per1_mod_reset);
-	setbits_le32(&reset_manager_base->per0_mod_reset, ~mask_ecc_ocp);
-
-	/* Finally disable the ECC_OCP */
-	setbits_le32(&reset_manager_base->per0_mod_reset, mask_ecc_ocp);
-#endif
-}
 
 /*
  * Write the reset manager register to cause reset
@@ -89,54 +30,3 @@ void reset_cpu(ulong addr)
 		;
 }
 
-#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
-/*
- * Release peripherals from reset based on handoff
- */
-void reset_deassert_peripherals_handoff(void)
-{
-	writel(0, &reset_manager_base->per_mod_reset);
-}
-#endif
-
-#if defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
-void socfpga_bridges_reset(int enable)
-{
-	/* For SoCFPGA-VT, this is NOP. */
-}
-#else
-
-#define L3REGS_REMAP_LWHPS2FPGA_MASK	0x10
-#define L3REGS_REMAP_HPS2FPGA_MASK	0x08
-#define L3REGS_REMAP_OCRAM_MASK		0x01
-
-void socfpga_bridges_reset(int enable)
-{
-#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
-	const uint32_t l3mask = L3REGS_REMAP_LWHPS2FPGA_MASK |
-				L3REGS_REMAP_HPS2FPGA_MASK |
-				L3REGS_REMAP_OCRAM_MASK;
-
-	if (enable) {
-		/* brdmodrst */
-		writel(0xffffffff, &reset_manager_base->brg_mod_reset);
-	} else {
-		writel(0, &sysmgr_regs->iswgrp_handoff[0]);
-		writel(l3mask, &sysmgr_regs->iswgrp_handoff[1]);
-
-		/* Check signal from FPGA. */
-		if (!fpgamgr_test_fpga_ready()) {
-			/* FPGA not ready, do nothing. */
-			printf("%s: FPGA not ready, aborting.\n", __func__);
-			return;
-		}
-
-		/* brdmodrst */
-		writel(0, &reset_manager_base->brg_mod_reset);
-
-		/* Remap the bridges into memory map */
-		writel(l3mask, SOCFPGA_L3REGS_ADDRESS);
-	}
-#endif
-}
-#endif
diff --git a/arch/arm/mach-socfpga/reset_manager_arria10.c b/arch/arm/mach-socfpga/reset_manager_arria10.c
new file mode 100644
index 0000000..66ccebc
--- /dev/null
+++ b/arch/arm/mach-socfpga/reset_manager_arria10.c
@@ -0,0 +1,407 @@
+/*
+ * Copyright (C) 2016, Intel Corporation
+ *
+ * SPDX-License-Identifier:    GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/fpga_manager.h>
+#include <asm/arch/misc.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/arch/system_manager.h>
+#include <fdtdec.h>
+#include <errno.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct socfpga_reset_manager *reset_manager_base =
+		(void *)SOCFPGA_RSTMGR_ADDRESS;
+static const struct socfpga_system_manager *sysmgr_regs =
+	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
+
+static int get_bridge_init_val(const void *blob, int compat_id);
+
+#define ECC_MASK (ALT_RSTMGR_PER0MODRST_EMACECC0_SET_MSK|\
+	ALT_RSTMGR_PER0MODRST_EMACECC1_SET_MSK|\
+	ALT_RSTMGR_PER0MODRST_EMACECC2_SET_MSK|\
+	ALT_RSTMGR_PER0MODRST_NANDECC_SET_MSK|\
+	ALT_RSTMGR_PER0MODRST_QSPIECC_SET_MSK|\
+	ALT_RSTMGR_PER0MODRST_SDMMCECC_SET_MSK)
+
+void reset_assert_uart(void)
+{
+	u32 mask = 0;
+	unsigned int com_port;
+
+	com_port = uart_com_port(gd->fdt_blob);
+
+	if (SOCFPGA_UART1_ADDRESS == com_port)
+		mask |= ALT_RSTMGR_PER1MODRST_UART1_SET_MSK;
+	else if (SOCFPGA_UART0_ADDRESS == com_port)
+		mask |= ALT_RSTMGR_PER1MODRST_UART0_SET_MSK;
+
+	setbits_le32(&reset_manager_base->per1modrst, mask);
+}
+
+void reset_deassert_uart(void)
+{
+	u32 mask = 0;
+	unsigned int com_port;
+
+	com_port = uart_com_port(gd->fdt_blob);
+
+	if (SOCFPGA_UART1_ADDRESS == com_port)
+		mask |= ALT_RSTMGR_PER1MODRST_UART1_SET_MSK;
+	else if (SOCFPGA_UART0_ADDRESS == com_port)
+		mask |= ALT_RSTMGR_PER1MODRST_UART0_SET_MSK;
+
+	clrbits_le32(&reset_manager_base->per1modrst, mask);
+}
+
+static const uint32_t per0fpgamasks[] = {
+	ALT_RSTMGR_PER0MODRST_EMACECC0_SET_MSK |
+	ALT_RSTMGR_PER0MODRST_EMAC0_SET_MSK,
+	ALT_RSTMGR_PER0MODRST_EMACECC1_SET_MSK |
+	ALT_RSTMGR_PER0MODRST_EMAC1_SET_MSK,
+	ALT_RSTMGR_PER0MODRST_EMACECC2_SET_MSK |
+	ALT_RSTMGR_PER0MODRST_EMAC2_SET_MSK,
+	0, /* i2c0 per1mod */
+	0, /* i2c1 per1mod */
+	0, /* i2c0_emac */
+	0, /* i2c1_emac */
+	0, /* i2c2_emac */
+	ALT_RSTMGR_PER0MODRST_NANDECC_SET_MSK |
+	ALT_RSTMGR_PER0MODRST_NAND_SET_MSK,
+	ALT_RSTMGR_PER0MODRST_QSPIECC_SET_MSK |
+	ALT_RSTMGR_PER0MODRST_QSPI_SET_MSK,
+	ALT_RSTMGR_PER0MODRST_SDMMCECC_SET_MSK |
+	ALT_RSTMGR_PER0MODRST_SDMMC_SET_MSK,
+	ALT_RSTMGR_PER0MODRST_SPIM0_SET_MSK,
+	ALT_RSTMGR_PER0MODRST_SPIM1_SET_MSK,
+	ALT_RSTMGR_PER0MODRST_SPIS0_SET_MSK,
+	ALT_RSTMGR_PER0MODRST_SPIS1_SET_MSK,
+	0, /* uart0 per1mod */
+	0, /* uart1 per1mod */
+};
+
+static const uint32_t per1fpgamasks[] = {
+	0, /* emac0 per0mod */
+	0, /* emac1 per0mod */
+	0, /* emac2 per0mod */
+	ALT_RSTMGR_PER1MODRST_I2C0_SET_MSK,
+	ALT_RSTMGR_PER1MODRST_I2C1_SET_MSK,
+	ALT_RSTMGR_PER1MODRST_I2C2_SET_MSK, /* i2c0_emac */
+	ALT_RSTMGR_PER1MODRST_I2C3_SET_MSK, /* i2c1_emac */
+	ALT_RSTMGR_PER1MODRST_I2C4_SET_MSK, /* i2c2_emac */
+	0, /* nand per0mod */
+	0, /* qspi per0mod */
+	0, /* sdmmc per0mod */
+	0, /* spim0 per0mod */
+	0, /* spim1 per0mod */
+	0, /* spis0 per0mod */
+	0, /* spis1 per0mod */
+	ALT_RSTMGR_PER1MODRST_UART0_SET_MSK,
+	ALT_RSTMGR_PER1MODRST_UART1_SET_MSK,
+};
+
+struct bridge_cfg {
+	int compat_id;
+	u32  mask_noc;
+	u32  mask_rstmgr;
+};
+
+static const struct bridge_cfg bridge_cfg_tbl[] = {
+	{
+		COMPAT_ALTERA_SOCFPGA_H2F_BRG,
+		ALT_SYSMGR_NOC_H2F_SET_MSK,
+		ALT_RSTMGR_BRGMODRST_H2F_SET_MSK,
+	},
+	{
+		COMPAT_ALTERA_SOCFPGA_LWH2F_BRG,
+		ALT_SYSMGR_NOC_LWH2F_SET_MSK,
+		ALT_RSTMGR_BRGMODRST_LWH2F_SET_MSK,
+	},
+	{
+		COMPAT_ALTERA_SOCFPGA_F2H_BRG,
+		ALT_SYSMGR_NOC_F2H_SET_MSK,
+		ALT_RSTMGR_BRGMODRST_F2H_SET_MSK,
+	},
+	{
+		COMPAT_ALTERA_SOCFPGA_F2SDR0,
+		ALT_SYSMGR_NOC_F2SDR0_SET_MSK,
+		ALT_RSTMGR_BRGMODRST_F2SSDRAM0_SET_MSK,
+	},
+	{
+		COMPAT_ALTERA_SOCFPGA_F2SDR1,
+		ALT_SYSMGR_NOC_F2SDR1_SET_MSK,
+		ALT_RSTMGR_BRGMODRST_F2SSDRAM1_SET_MSK,
+	},
+	{
+		COMPAT_ALTERA_SOCFPGA_F2SDR2,
+		ALT_SYSMGR_NOC_F2SDR2_SET_MSK,
+		ALT_RSTMGR_BRGMODRST_F2SSDRAM2_SET_MSK,
+	},
+};
+
+/* Disable the watchdog (toggle reset to watchdog) */
+void watchdog_disable(void)
+{
+	/* assert reset for watchdog */
+	setbits_le32(&reset_manager_base->per1modrst,
+		ALT_RSTMGR_PER1MODRST_WD0_SET_MSK);
+
+}
+
+/* Release NOC ddr scheduler from reset */
+void reset_deassert_noc_ddr_scheduler(void)
+{
+	clrbits_le32(&reset_manager_base->brgmodrst,
+		ALT_RSTMGR_BRGMODRST_DDRSCH_SET_MSK);
+}
+
+/* Check whether Watchdog in reset state? */
+int is_wdt_in_reset(void)
+{
+	unsigned long val;
+
+	val = readl(&reset_manager_base->per1modrst);
+	val &= ALT_RSTMGR_PER1MODRST_WD0_SET_MSK;
+
+	/* return 0x1 if watchdog in reset */
+	return val;
+}
+
+/* emacbase: base address of emac to enable/disable reset
+ * state: 0 - disable reset, !0 - enable reset
+ */
+void emac_manage_reset(ulong emacbase, uint state)
+{
+	ulong eccmask;
+	ulong emacmask;
+	switch (emacbase) {
+	case SOCFPGA_EMAC0_ADDRESS:
+		eccmask = ALT_RSTMGR_PER0MODRST_EMACECC0_SET_MSK;
+		emacmask = ALT_RSTMGR_PER0MODRST_EMAC0_SET_MSK;
+		break;
+	case SOCFPGA_EMAC1_ADDRESS:
+		eccmask = ALT_RSTMGR_PER0MODRST_EMACECC1_SET_MSK;
+		emacmask = ALT_RSTMGR_PER0MODRST_EMAC1_SET_MSK;
+		break;
+	case SOCFPGA_EMAC2_ADDRESS:
+		eccmask = ALT_RSTMGR_PER0MODRST_EMACECC2_SET_MSK;
+		emacmask = ALT_RSTMGR_PER0MODRST_EMAC2_SET_MSK;
+		break;
+	default:
+		error("emac base address unexpected! %lx", emacbase);
+		hang();
+		break;
+	}
+
+	if (state) {
+		/* Enable ECC OCP first */
+		setbits_le32(&reset_manager_base->per0modrst, eccmask);
+		setbits_le32(&reset_manager_base->per0modrst, emacmask);
+	} else {
+		/* Disable ECC OCP first */
+		clrbits_le32(&reset_manager_base->per0modrst, emacmask);
+		clrbits_le32(&reset_manager_base->per0modrst, eccmask);
+	}
+}
+
+static int get_bridge_init_val(const void *blob, int compat_id)
+{
+	int rval = 0;
+	int node;
+	u32 val;
+
+	node = fdtdec_next_compatible(blob, 0, compat_id);
+	if (node >= 0) {
+		if (!fdtdec_get_int_array(blob, node, "init-val", &val, 1)) {
+			if (val == 1)
+				rval = val;
+		}
+	}
+	return rval;
+}
+
+/* Enable bridges (hps2fpga, lwhps2fpga, fpga2hps, fpga2sdram) per handoff */
+int reset_deassert_bridges_handoff(void)
+{
+	u32 mask_noc = 0, mask_rstmgr = 0;
+	int i;
+	unsigned start = get_timer(0);
+
+	for (i = 0; i < ARRAY_SIZE(bridge_cfg_tbl); i++) {
+		if (get_bridge_init_val(gd->fdt_blob,
+					bridge_cfg_tbl[i].compat_id)) {
+			mask_noc |= bridge_cfg_tbl[i].mask_noc;
+			mask_rstmgr |= bridge_cfg_tbl[i].mask_rstmgr;
+		}
+	}
+
+	/* clear idle request to all bridges */
+	setbits_le32(&sysmgr_regs->noc_idlereq_clr, mask_noc);
+
+	/* Release bridges from reset state per handoff value */
+	clrbits_le32(&reset_manager_base->brgmodrst, mask_rstmgr);
+
+	/* Poll until all idleack to 0, timeout at 1000ms */
+	while (readl(&sysmgr_regs->noc_idleack) & mask_noc) {
+		if (get_timer(start) > 1000) {
+			printf("Fail: noc_idleack = 0x%08x mask_noc = 0x%08x\n",
+				readl(&sysmgr_regs->noc_idleack),
+				mask_noc);
+			return -ETIMEDOUT;
+		}
+	}
+	return 0;
+}
+
+void reset_assert_fpga_connected_peripherals(void)
+{
+	uint32_t mask0 = 0;
+	uint32_t mask1 = 0;
+	uint32_t fpga_pinux_addr = SOCFPGA_PINMUX_FPGA_INTERFACE_ADDRESS;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(per1fpgamasks); i++) {
+		if (readl(fpga_pinux_addr)) {
+			mask0 |= per0fpgamasks[i];
+			mask1 |= per1fpgamasks[i];
+		}
+		fpga_pinux_addr += sizeof(uint32_t);
+	}
+
+	setbits_le32(&reset_manager_base->per0modrst, mask0 & ECC_MASK);
+	setbits_le32(&reset_manager_base->per1modrst, mask1);
+	setbits_le32(&reset_manager_base->per0modrst, mask0);
+}
+
+/* Release L4 OSC1 Watchdog Timer 0 from reset through reset manager */
+void reset_deassert_osc1wd0(void)
+{
+	clrbits_le32(&reset_manager_base->per1modrst,
+		ALT_RSTMGR_PER1MODRST_WD0_SET_MSK);
+}
+
+/*
+ * Assert or de-assert SoCFPGA reset manager reset.
+ */
+void socfpga_per_reset(u32 reset, int set)
+{
+	const volatile uint32_t *reg;
+	uint32_t rstmgr_bank = RSTMGR_BANK(reset);
+
+	switch (rstmgr_bank) {
+		case 0:
+			reg = &reset_manager_base->mpumodrst;
+			break;
+		case 1:
+			reg = &reset_manager_base->per0modrst;
+			break;
+		case 2:
+			reg = &reset_manager_base->per1modrst;
+			break;
+		case 3:
+			reg = &reset_manager_base->brgmodrst;
+			break;
+		case 4:
+			reg = &reset_manager_base->sysmodrst;
+			break;
+
+		default:
+			return;
+	}
+
+	if (set)
+		setbits_le32(reg, 1 << RSTMGR_RESET(reset));
+	else
+		clrbits_le32(reg, 1 << RSTMGR_RESET(reset));
+}
+
+/*
+ * Assert reset on every peripheral but L4WD0.
+ * Watchdog must be kept intact to prevent glitches
+ * and/or hangs.
+ * For the Arria10, we disable all the peripherals except L4 watchdog0,
+ * L4 Timer 0, and ECC.
+ */
+void socfpga_per_reset_all(void)
+{
+	const u32 l4wd0 = (1 << RSTMGR_RESET(SOCFPGA_RESET(L4WD0)) |
+			(1 << RSTMGR_RESET(SOCFPGA_RESET(L4SYSTIMER0))));
+
+	unsigned mask_ecc_ocp =
+		ALT_RSTMGR_PER0MODRST_EMACECC0_SET_MSK |
+		ALT_RSTMGR_PER0MODRST_EMACECC1_SET_MSK |
+		ALT_RSTMGR_PER0MODRST_EMACECC2_SET_MSK |
+		ALT_RSTMGR_PER0MODRST_USBECC0_SET_MSK |
+		ALT_RSTMGR_PER0MODRST_USBECC1_SET_MSK |
+		ALT_RSTMGR_PER0MODRST_NANDECC_SET_MSK |
+		ALT_RSTMGR_PER0MODRST_QSPIECC_SET_MSK |
+		ALT_RSTMGR_PER0MODRST_SDMMCECC_SET_MSK;
+
+	/* disable all components except ECC_OCP, L4 Timer0 and L4 WD0 */
+	writel(~l4wd0, &reset_manager_base->per1modrst);
+	setbits_le32(&reset_manager_base->per0modrst, ~mask_ecc_ocp);
+
+	/* Finally disable the ECC_OCP */
+	setbits_le32(&reset_manager_base->per0modrst, mask_ecc_ocp);
+}
+
+#if defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
+void socfpga_bridges_reset(int enable)
+{
+	/* For SoCFPGA-VT, this is NOP. */
+}
+#else
+void socfpga_bridges_reset(int enable)
+{
+/* Disable all the bridges (hps2fpga, lwhps2fpga, fpga2hps, fpga2sdram) */
+	/* set idle request to all bridges */
+	writel(ALT_SYSMGR_NOC_H2F_SET_MSK |
+		ALT_SYSMGR_NOC_LWH2F_SET_MSK |
+		ALT_SYSMGR_NOC_F2H_SET_MSK |
+		ALT_SYSMGR_NOC_F2SDR0_SET_MSK |
+		ALT_SYSMGR_NOC_F2SDR1_SET_MSK |
+		ALT_SYSMGR_NOC_F2SDR2_SET_MSK,
+		&sysmgr_regs->noc_idlereq_set);
+
+	/* Enable the NOC timeout */
+	writel(ALT_SYSMGR_NOC_TMO_EN_SET_MSK,
+		&sysmgr_regs->noc_timeout);
+
+	/* Poll until all idleack to 1 */
+	while ((readl(&sysmgr_regs->noc_idleack) ^
+		(ALT_SYSMGR_NOC_H2F_SET_MSK |
+		ALT_SYSMGR_NOC_LWH2F_SET_MSK |
+		ALT_SYSMGR_NOC_F2H_SET_MSK |
+		ALT_SYSMGR_NOC_F2SDR0_SET_MSK |
+		ALT_SYSMGR_NOC_F2SDR1_SET_MSK |
+		ALT_SYSMGR_NOC_F2SDR2_SET_MSK)))
+		;
+
+	/* Poll until all idlestatus to 1 */
+	while ((readl(&sysmgr_regs->noc_idlestatus) ^
+		(ALT_SYSMGR_NOC_H2F_SET_MSK |
+		ALT_SYSMGR_NOC_LWH2F_SET_MSK |
+		ALT_SYSMGR_NOC_F2H_SET_MSK |
+		ALT_SYSMGR_NOC_F2SDR0_SET_MSK |
+		ALT_SYSMGR_NOC_F2SDR1_SET_MSK |
+		ALT_SYSMGR_NOC_F2SDR2_SET_MSK)))
+		;
+
+	/* Put all bridges (except NOR DDR scheduler) into reset state */
+	setbits_le32(&reset_manager_base->brgmodrst,
+		(ALT_RSTMGR_BRGMODRST_H2F_SET_MSK |
+		ALT_RSTMGR_BRGMODRST_LWH2F_SET_MSK |
+		ALT_RSTMGR_BRGMODRST_F2H_SET_MSK |
+		ALT_RSTMGR_BRGMODRST_F2SSDRAM0_SET_MSK |
+		ALT_RSTMGR_BRGMODRST_F2SSDRAM1_SET_MSK |
+		ALT_RSTMGR_BRGMODRST_F2SSDRAM2_SET_MSK));
+
+	/* Disable NOC timeout */
+	writel(0, &sysmgr_regs->noc_timeout);
+}
+#endif
diff --git a/arch/arm/mach-socfpga/reset_manager.c b/arch/arm/mach-socfpga/reset_manager_gen5.c
similarity index 58%
copy from arch/arm/mach-socfpga/reset_manager.c
copy to arch/arm/mach-socfpga/reset_manager_gen5.c
index d0ff6c4..8c1f96e 100644
--- a/arch/arm/mach-socfpga/reset_manager.c
+++ b/arch/arm/mach-socfpga/reset_manager_gen5.c
@@ -1,10 +1,9 @@
 /*
- *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ * Copyright (C) 2016, Intel Corporation
  *
- * SPDX-License-Identifier:	GPL-2.0+
+ * SPDX-License-Identifier:    GPL-2.0
  */
 
-
 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/fpga_manager.h>
@@ -15,28 +14,45 @@ DECLARE_GLOBAL_DATA_PTR;
 
 static const struct socfpga_reset_manager *reset_manager_base =
 		(void *)SOCFPGA_RSTMGR_ADDRESS;
-static struct socfpga_system_manager *sysmgr_regs =
+static const struct socfpga_system_manager *sysmgr_regs =
 	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
 
 /*
+ * Release peripherals from reset based on handoff
+ */
+void reset_deassert_peripherals_handoff(void)
+{
+	writel(0, &reset_manager_base->per_mod_reset);
+}
+
+/*
  * Assert or de-assert SoCFPGA reset manager reset.
  */
 void socfpga_per_reset(u32 reset, int set)
 {
-	const void *reg;
-
-	if (RSTMGR_BANK(reset) == 0)
-		reg = &reset_manager_base->mpu_mod_reset;
-	else if (RSTMGR_BANK(reset) == 1)
-		reg = &reset_manager_base->per_mod_reset;
-	else if (RSTMGR_BANK(reset) == 2)
-		reg = &reset_manager_base->per2_mod_reset;
-	else if (RSTMGR_BANK(reset) == 3)
-		reg = &reset_manager_base->brg_mod_reset;
-	else if (RSTMGR_BANK(reset) == 4)
-		reg = &reset_manager_base->misc_mod_reset;
-	else	/* Invalid reset register, do nothing */
-		return;
+	const volatile uint32_t *reg;
+	uint32_t rstmgr_bank = RSTMGR_BANK(reset);
+
+	switch (rstmgr_bank) {
+		case 0:
+			reg = &reset_manager_base->mpu_mod_reset;
+			break;
+		case 1:
+			reg = &reset_manager_base->per_mod_reset;
+			break;
+		case 2:
+			reg = &reset_manager_base->per2_mod_reset;
+			break;
+		case 3:
+			reg = &reset_manager_base->brg_mod_reset;
+			break;
+		case 4:
+			reg = &reset_manager_base->misc_mod_reset;
+			break;
+
+		default:
+			return;
+	}
 
 	if (set)
 		setbits_le32(reg, 1 << RSTMGR_RESET(reset));
@@ -53,52 +69,12 @@ void socfpga_per_reset(u32 reset, int set)
  */
 void socfpga_per_reset_all(void)
 {
-#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 	const u32 l4wd0 = 1 << RSTMGR_RESET(SOCFPGA_RESET(L4WD0));
 
 	writel(~l4wd0, &reset_manager_base->per_mod_reset);
 	writel(0xffffffff, &reset_manager_base->per2_mod_reset);
-#else
-	const u32 l4wd0 = (1 << RSTMGR_RESET(SOCFPGA_RESET(L4WD0)) |
-			(1 << RSTMGR_RESET(SOCFPGA_RESET(L4SYSTIMER0))));
-
-	unsigned mask_ecc_ocp = 0x0000FF00;
-
-	/* disable all components except ECC_OCP, L4 Timer0 and L4 WD0 */
-	writel(~l4wd0, &reset_manager_base->per1_mod_reset);
-	setbits_le32(&reset_manager_base->per0_mod_reset, ~mask_ecc_ocp);
-
-	/* Finally disable the ECC_OCP */
-	setbits_le32(&reset_manager_base->per0_mod_reset, mask_ecc_ocp);
-#endif
 }
 
-/*
- * Write the reset manager register to cause reset
- */
-void reset_cpu(ulong addr)
-{
-	/* request a warm reset */
-	writel((1 << RSTMGR_CTRL_SWWARMRSTREQ_LSB),
-		&reset_manager_base->ctrl);
-	/*
-	 * infinite loop here as watchdog will trigger and reset
-	 * the processor
-	 */
-	while (1)
-		;
-}
-
-#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
-/*
- * Release peripherals from reset based on handoff
- */
-void reset_deassert_peripherals_handoff(void)
-{
-	writel(0, &reset_manager_base->per_mod_reset);
-}
-#endif
-
 #if defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
 void socfpga_bridges_reset(int enable)
 {
@@ -112,7 +88,6 @@ void socfpga_bridges_reset(int enable)
 
 void socfpga_bridges_reset(int enable)
 {
-#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 	const uint32_t l3mask = L3REGS_REMAP_LWHPS2FPGA_MASK |
 				L3REGS_REMAP_HPS2FPGA_MASK |
 				L3REGS_REMAP_OCRAM_MASK;
@@ -137,6 +112,5 @@ void socfpga_bridges_reset(int enable)
 		/* Remap the bridges into memory map */
 		writel(l3mask, SOCFPGA_L3REGS_ADDRESS);
 	}
-#endif
 }
 #endif
-- 
1.7.7.4

[U-Boot] [v3 25/30] arm: socfpga: arria10: Added drivers for Arria10 Reset Manager

[Dinh Nguyen]

On 01/06/2017 05:19 AM, Chee Tien Fong wrote:
> From: Tien Fong Chee <tien.fong.chee@intel.com>
>
> Drivers for reset manager is restructured such that common functions,
> gen5 drivers and Arria10 drivers are moved to reset_manager.c,
> reset_manager_gen5.c and reset_manager_arria10.c respectively.
>

In Linux, I was able to use the same reset manager driver to support 
both gen5 and Arria10 devices, are you sure you can't do the same here?

Take a look at this commit:

https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commi/drivers/rese/resetsocfpga.c?id=27e44646dc0083c931b71bbb8e179aeb38010d31

My guess is that you can probably use the same driver but with different 
macro defines.

> Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
> Cc: Marek Vasut <marex@denx.de>
> Cc: Dinh Nguyen <dinguyen@kernel.org>
> Cc: Chin Liang See <chin.liang.see@intel.com>
> Cc: Tien Fong <skywindctf@gmail.com>
> ---
> Changes for V3
> - no changes
> Changes for V2
> - Reverted license changes, removing extern and volatile declaration
> ---
>  arch/arm/mach-socfpga/Makefile                     |   16 +-
>  arch/arm/mach-socfpga/include/mach/reset_manager.h |  155 ++++++--
>  arch/arm/mach-socfpga/reset_manager.c              |  112 +------
>  arch/arm/mach-socfpga/reset_manager_arria10.c      |  407 ++++++++++++++++++++
>  .../{reset_manager.c => reset_manager_gen5.c}      |   94 ++---
>  5 files changed, 570 insertions(+), 214 deletions(-)
>  create mode 100644 arch/arm/mach-socfpga/reset_manager_arria10.c
>  copy arch/arm/mach-socfpga/{reset_manager.c => reset_manager_gen5.c} (58%)
>
> diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
> index 809cd47..b8fcf6e 100644
> --- a/arch/arm/mach-socfpga/Makefile
> +++ b/arch/arm/mach-socfpga/Makefile
> @@ -2,21 +2,27 @@
>  # (C) Copyright 2000-2003
>  # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
>  #
> -# Copyright (C) 2012 Altera Corporation <www.altera.com>
> +# Copyright (C) 2012-2016 Altera Corporation <www.altera.com>
>  #
>  # SPDX-License-Identifier:	GPL-2.0+
>  #
>
>  obj-y	+= misc.o timer.o reset_manager.o system_manager.o clock_manager.o \
>  	   fpga_manager.o board.o
> +obj-$(CONFIG_TARGET_SOCFPGA_ARRIA10) += reset_manager_arria10.o
> +obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += scan_manager.o wrap_pll_config.o \
> +				reset_manager_gen5.o
>
> -obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o
> +ifdef CONFIG_SPL_BUILD
> +obj-y += spl.o
> +obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += freeze_controller.o wrap_iocsr_config.o \
> +				wrap_pinmux_config.o wrap_sdram_config.o
> +endif
>
> +ifdef CONFIG_TARGET_SOCFPGA_GEN5
>  # QTS-generated config file wrappers
> -obj-$(CONFIG_TARGET_SOCFPGA_GEN5)	+= scan_manager.o wrap_pll_config.o
> -obj-$(CONFIG_SPL_BUILD) += wrap_iocsr_config.o wrap_pinmux_config.o	\
> -			   wrap_sdram_config.o
>  CFLAGS_wrap_iocsr_config.o	+= -I$(srctree)/board/$(BOARDDIR)
>  CFLAGS_wrap_pinmux_config.o	+= -I$(srctree)/board/$(BOARDDIR)
>  CFLAGS_wrap_pll_config.o	+= -I$(srctree)/board/$(BOARDDIR)
>  CFLAGS_wrap_sdram_config.o	+= -I$(srctree)/board/$(BOARDDIR)
> +endif
> diff --git a/arch/arm/mach-socfpga/include/mach/reset_manager.h b/arch/arm/mach-socfpga/include/mach/reset_manager.h
> index 6225118..13f9731 100644
> --- a/arch/arm/mach-socfpga/include/mach/reset_manager.h
> +++ b/arch/arm/mach-socfpga/include/mach/reset_manager.h
> @@ -1,5 +1,5 @@
>  /*
> - *  Copyright (C) 2012 Altera Corporation <www.altera.com>
> + *  Copyright (C) 2012-2016 Altera Corporation <www.altera.com>
>   *
>   * SPDX-License-Identifier:	GPL-2.0+
>   */
> @@ -7,15 +7,27 @@
>  #ifndef	_RESET_MANAGER_H_
>  #define	_RESET_MANAGER_H_
>
> +/* Common function prototypes */
>  void reset_cpu(ulong addr);
> -void reset_deassert_peripherals_handoff(void);
> -
>  void socfpga_bridges_reset(int enable);
> -
>  void socfpga_per_reset(u32 reset, int set);
>  void socfpga_per_reset_all(void);
>
>  #if defined(CONFIG_TARGET_SOCFPGA_GEN5)
> +void reset_deassert_peripherals_handoff(void);
> +#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
> +void watchdog_disable(void);
> +void reset_deassert_noc_ddr_scheduler(void);
> +int is_wdt_in_reset(void);
> +void emac_manage_reset(ulong emacbase, uint state);
> +int reset_deassert_bridges_handoff(void);
> +void reset_assert_fpga_connected_peripherals(void);
> +void reset_deassert_osc1wd0(void);
> +void reset_assert_uart(void);
> +void reset_deassert_uart(void);

Not sure why you need these new functions instead of re-using 
socfpga_per_reset()?

> +#endif
> +
> +#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
>  struct socfpga_reset_manager {
>  	u32	status;
>  	u32	ctrl;
> @@ -29,40 +41,40 @@ struct socfpga_reset_manager {
>  	u32	padding2[12];
>  	u32	tstscratch;
>  };
> -#else
> +#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
>  struct socfpga_reset_manager {
> -	u32	stat;
> -	u32	ramstat;
> -	u32	miscstat;
> -	u32	ctrl;
> -	u32	hdsken;
> -	u32	hdskreq;
> -	u32	hdskack;
> -	u32	counts;
> -	u32	mpu_mod_reset;
> -	u32	per_mod_reset;	/* stated as per0_mod_reset in A10 datasheet */
> -	u32	per2_mod_reset;	/* stated as per1_mod_reset in A10 datasheet */
> -	u32	brg_mod_reset;
> -	u32	misc_mod_reset;	/* stated as sys_mod_reset in A10 datasheet */
> -	u32	coldmodrst;
> -	u32	nrstmodrst;
> -	u32	dbgmodrst;
> -	u32	mpuwarmmask;
> -	u32	per0warmmask;
> -	u32	per1warmmask;
> -	u32	brgwarmmask;
> -	u32	syswarmmask;
> -	u32	nrstwarmmask;
> -	u32	l3warmmask;
> -	u32	tststa;
> -	u32	tstscratch;
> -	u32	hdsktimeout;
> -	u32	hmcintr;
> -	u32	hmcintren;
> -	u32	hmcintrens;
> -	u32	hmcintrenr;
> -	u32	hmcgpout;
> -	u32	hmcgpin;
> +	uint32_t  stat;
> +	uint32_t  ramstat;
> +	uint32_t  miscstat;
> +	uint32_t  ctrl;
> +	uint32_t  hdsken;
> +	uint32_t  hdskreq;
> +	uint32_t  hdskack;
> +	uint32_t  counts;
> +	uint32_t  mpumodrst;
> +	uint32_t  per0modrst;
> +	uint32_t  per1modrst;
> +	uint32_t  brgmodrst;
> +	uint32_t  sysmodrst;
> +	uint32_t  coldmodrst;
> +	uint32_t  nrstmodrst;
> +	uint32_t  dbgmodrst;
> +	uint32_t  mpuwarmmask;
> +	uint32_t  per0warmmask;
> +	uint32_t  per1warmmask;
> +	uint32_t  brgwarmmask;
> +	uint32_t  syswarmmask;
> +	uint32_t  nrstwarmmask;
> +	uint32_t  l3warmmask;
> +	uint32_t  tststa;
> +	uint32_t  tstscratch;
> +	uint32_t  hdsktimeout;
> +	uint32_t  hmcintr;
> +	uint32_t  hmcintren;
> +	uint32_t  hmcintrens;
> +	uint32_t  hmcintrenr;
> +	uint32_t  hmcgpout;
> +	uint32_t  hmcgpin;
>  };
>  #endif
>

Why did you have to change the type for these reset manager variables?

Dinh

[U-Boot] [v3 25/30] arm: socfpga: arria10: Added drivers for Arria10 Reset Manager

[Chee, Tien Fong]

On Jum, 2017-01-06 at 17:03 -0600, Dinh Nguyen wrote:
> 
> On 01/06/2017 05:19 AM, Chee Tien Fong wrote:
> > 
> > From: Tien Fong Chee <tien.fong.chee@intel.com>
> > 
> > Drivers for reset manager is restructured such that common
> > functions,
> > gen5 drivers and Arria10 drivers are moved to reset_manager.c,
> > reset_manager_gen5.c and reset_manager_arria10.c respectively.
> > 
> In Linux, I was able to use the same reset manager driver to support?
> both gen5 and Arria10 devices, are you sure you can't do the same
> here?
> 
> Take a look at this commit:
> 
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commi
> /drivers/rese/resetsocfpga.c?id=27e44646dc0083c931b71bbb8e179aeb38010
> d31
> 
> My guess is that you can probably use the same driver but with
> different?
> macro defines.
> 
We have some prepocessing required before triggering the simple reset
assert/deassert on the right peripheral. Some new functions are created
for specific group reset purpose like all bridges reset based on
handoff. As per agreement between marek and CL, those functions merging
which require #ifdef arria10/gen5, then for the sake of clean code, it
is better putting them in different files based on device type.
> > 
> > Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
> > Cc: Marek Vasut <marex@denx.de>
> > Cc: Dinh Nguyen <dinguyen@kernel.org>
> > Cc: Chin Liang See <chin.liang.see@intel.com>
> > Cc: Tien Fong <skywindctf@gmail.com>
> > ---
> > Changes for V3
> > - no changes
> > Changes for V2
> > - Reverted license changes, removing extern and volatile
> > declaration
> > ---
> > ?arch/arm/mach-socfpga/Makefile?????????????????????|???16 +-
> > ?arch/arm/mach-socfpga/include/mach/reset_manager.h |??155 ++++++--
> > ?arch/arm/mach-socfpga/reset_manager.c??????????????|??112 +------
> > ?arch/arm/mach-socfpga/reset_manager_arria10.c??????|??407
> > ++++++++++++++++++++
> > ?.../{reset_manager.c => reset_manager_gen5.c}??????|???94 ++---
> > ?5 files changed, 570 insertions(+), 214 deletions(-)
> > ?create mode 100644 arch/arm/mach-socfpga/reset_manager_arria10.c
> > ?copy arch/arm/mach-socfpga/{reset_manager.c =>
> > reset_manager_gen5.c} (58%)
> > 
> > diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-
> > socfpga/Makefile
> > index 809cd47..b8fcf6e 100644
> > --- a/arch/arm/mach-socfpga/Makefile
> > +++ b/arch/arm/mach-socfpga/Makefile
> > @@ -2,21 +2,27 @@
> > ?# (C) Copyright 2000-2003
> > ?# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> > ?#
> > -# Copyright (C) 2012 Altera Corporation <www.altera.com>
> > +# Copyright (C) 2012-2016 Altera Corporation <www.altera.com>
> > ?#
> > ?# SPDX-License-Identifier:	GPL-2.0+
> > ?#
> > 
> > ?obj-y	+= misc.o timer.o reset_manager.o system_manager.o
> > clock_manager.o \
> > ?	???fpga_manager.o board.o
> > +obj-$(CONFIG_TARGET_SOCFPGA_ARRIA10) += reset_manager_arria10.o
> > +obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += scan_manager.o
> > wrap_pll_config.o \
> > +				reset_manager_gen5.o
> > 
> > -obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o
> > +ifdef CONFIG_SPL_BUILD
> > +obj-y += spl.o
> > +obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += freeze_controller.o
> > wrap_iocsr_config.o \
> > +				wrap_pinmux_config.o
> > wrap_sdram_config.o
> > +endif
> > 
> > +ifdef CONFIG_TARGET_SOCFPGA_GEN5
> > ?# QTS-generated config file wrappers
> > -obj-$(CONFIG_TARGET_SOCFPGA_GEN5)	+= scan_manager.o
> > wrap_pll_config.o
> > -obj-$(CONFIG_SPL_BUILD) += wrap_iocsr_config.o
> > wrap_pinmux_config.o	\
> > -			???wrap_sdram_config.o
> > ?CFLAGS_wrap_iocsr_config.o	+=
> > -I$(srctree)/board/$(BOARDDIR)
> > ?CFLAGS_wrap_pinmux_config.o	+=
> > -I$(srctree)/board/$(BOARDDIR)
> > ?CFLAGS_wrap_pll_config.o	+= -I$(srctree)/board/$(BOARDDIR)
> > ?CFLAGS_wrap_sdram_config.o	+=
> > -I$(srctree)/board/$(BOARDDIR)
> > +endif
> > diff --git a/arch/arm/mach-socfpga/include/mach/reset_manager.h
> > b/arch/arm/mach-socfpga/include/mach/reset_manager.h
> > index 6225118..13f9731 100644
> > --- a/arch/arm/mach-socfpga/include/mach/reset_manager.h
> > +++ b/arch/arm/mach-socfpga/include/mach/reset_manager.h
> > @@ -1,5 +1,5 @@
> > ?/*
> > - *??Copyright (C) 2012 Altera Corporation <www.altera.com>
> > + *??Copyright (C) 2012-2016 Altera Corporation <www.altera.com>
> > ? *
> > ? * SPDX-License-Identifier:	GPL-2.0+
> > ? */
> > @@ -7,15 +7,27 @@
> > ?#ifndef	_RESET_MANAGER_H_
> > ?#define	_RESET_MANAGER_H_
> > 
> > +/* Common function prototypes */
> > ?void reset_cpu(ulong addr);
> > -void reset_deassert_peripherals_handoff(void);
> > -
> > ?void socfpga_bridges_reset(int enable);
> > -
> > ?void socfpga_per_reset(u32 reset, int set);
> > ?void socfpga_per_reset_all(void);
> > 
> > ?#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
> > +void reset_deassert_peripherals_handoff(void);
> > +#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
> > +void watchdog_disable(void);
> > +void reset_deassert_noc_ddr_scheduler(void);
> > +int is_wdt_in_reset(void);
> > +void emac_manage_reset(ulong emacbase, uint state);
> > +int reset_deassert_bridges_handoff(void);
> > +void reset_assert_fpga_connected_peripherals(void);
> > +void reset_deassert_osc1wd0(void);
> > +void reset_assert_uart(void);
> > +void reset_deassert_uart(void);
> Not sure why you need these new functions instead of re-using?
> socfpga_per_reset()?
> 
Those reset functions are not just simple reset, there are some
preprocessing or populating based on handoff required before triggering
reset on right peripheral. For example, U-boot can reset deassert
correct UART port based on the handoff. So, we tidy up those
preprocessing ?and reset into one function. But for the
socfpga_per_reset, we have different register name in both
gen5/arria10, so i prefer to put them in separate file based on device
type. i believe it helps to avoid confusion when mapping the name to
our registers datasheet.
> > 
> > +#endif
> > +
> > +#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
> > ?struct socfpga_reset_manager {
> > ?	u32	status;
> > ?	u32	ctrl;
> > @@ -29,40 +41,40 @@ struct socfpga_reset_manager {
> > ?	u32	padding2[12];
> > ?	u32	tstscratch;
> > ?};
> > -#else
> > +#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
> > ?struct socfpga_reset_manager {
> > -	u32	stat;
> > -	u32	ramstat;
> > -	u32	miscstat;
> > -	u32	ctrl;
> > -	u32	hdsken;
> > -	u32	hdskreq;
> > -	u32	hdskack;
> > -	u32	counts;
> > -	u32	mpu_mod_reset;
> > -	u32	per_mod_reset;	/* stated as
> > per0_mod_reset in A10 datasheet */
> > -	u32	per2_mod_reset;	/* stated as
> > per1_mod_reset in A10 datasheet */
> > -	u32	brg_mod_reset;
> > -	u32	misc_mod_reset;	/* stated as
> > sys_mod_reset in A10 datasheet */
> > -	u32	coldmodrst;
> > -	u32	nrstmodrst;
> > -	u32	dbgmodrst;
> > -	u32	mpuwarmmask;
> > -	u32	per0warmmask;
> > -	u32	per1warmmask;
> > -	u32	brgwarmmask;
> > -	u32	syswarmmask;
> > -	u32	nrstwarmmask;
> > -	u32	l3warmmask;
> > -	u32	tststa;
> > -	u32	tstscratch;
> > -	u32	hdsktimeout;
> > -	u32	hmcintr;
> > -	u32	hmcintren;
> > -	u32	hmcintrens;
> > -	u32	hmcintrenr;
> > -	u32	hmcgpout;
> > -	u32	hmcgpin;
> > +	uint32_t??stat;
> > +	uint32_t??ramstat;
> > +	uint32_t??miscstat;
> > +	uint32_t??ctrl;
> > +	uint32_t??hdsken;
> > +	uint32_t??hdskreq;
> > +	uint32_t??hdskack;
> > +	uint32_t??counts;
> > +	uint32_t??mpumodrst;
> > +	uint32_t??per0modrst;
> > +	uint32_t??per1modrst;
> > +	uint32_t??brgmodrst;
> > +	uint32_t??sysmodrst;
> > +	uint32_t??coldmodrst;
> > +	uint32_t??nrstmodrst;
> > +	uint32_t??dbgmodrst;
> > +	uint32_t??mpuwarmmask;
> > +	uint32_t??per0warmmask;
> > +	uint32_t??per1warmmask;
> > +	uint32_t??brgwarmmask;
> > +	uint32_t??syswarmmask;
> > +	uint32_t??nrstwarmmask;
> > +	uint32_t??l3warmmask;
> > +	uint32_t??tststa;
> > +	uint32_t??tstscratch;
> > +	uint32_t??hdsktimeout;
> > +	uint32_t??hmcintr;
> > +	uint32_t??hmcintren;
> > +	uint32_t??hmcintrens;
> > +	uint32_t??hmcintrenr;
> > +	uint32_t??hmcgpout;
> > +	uint32_t??hmcgpin;
> > ?};
> > ?#endif
> > 
> Why did you have to change the type for these reset manager
> variables?
> 
> Dinh

I recalled i did some checking on these two types, for u32 type, the
build support on this type can be turned off, and some comment for the
limitation of using this type, like "avoid exported outside the kernel
to avoid name space clashes". However, uint32_t is widely accepted and
using in U-boot. For details, i think you need to dig more from the
codes, then i believe you will think uint32_t is better.

[U-Boot] [v3 26/30] arm: socfpga: arria10: Added miscellaneous drivers for Arria 10

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

The drivers is restructured such common functions, gen5 functions. and
arria10 functions are moved to misc.c, misc_gen5 and misc_arria10
respectively.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Ching Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
Changes for V3
- no changes
Changes for V2
- Populating base address of UART based on handoff setting.
---
 arch/arm/mach-socfpga/Makefile                |    6 +-
 arch/arm/mach-socfpga/include/mach/misc.h     |   32 ++
 arch/arm/mach-socfpga/misc.c                  |  427 +------------------------
 arch/arm/mach-socfpga/misc_arria10.c          |  255 +++++++++++++++
 arch/arm/mach-socfpga/{misc.c => misc_gen5.c} |  232 ++------------
 5 files changed, 337 insertions(+), 615 deletions(-)
 create mode 100644 arch/arm/mach-socfpga/include/mach/misc.h
 create mode 100644 arch/arm/mach-socfpga/misc_arria10.c
 copy arch/arm/mach-socfpga/{misc.c => misc_gen5.c} (66%)

diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
index b8fcf6e..1ab68be 100644
--- a/arch/arm/mach-socfpga/Makefile
+++ b/arch/arm/mach-socfpga/Makefile
@@ -9,9 +9,11 @@
 
 obj-y	+= misc.o timer.o reset_manager.o system_manager.o clock_manager.o \
 	   fpga_manager.o board.o
-obj-$(CONFIG_TARGET_SOCFPGA_ARRIA10) += reset_manager_arria10.o
+obj-$(CONFIG_TARGET_SOCFPGA_ARRIA10) += reset_manager_arria10.o misc_arria10.o \
+				clock_manager_arria10.o pinmux.o
 obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += scan_manager.o wrap_pll_config.o \
-				reset_manager_gen5.o
+				reset_manager_gen5.o misc_gen5.o \
+				clock_manager_gen5.o
 
 ifdef CONFIG_SPL_BUILD
 obj-y += spl.o
diff --git a/arch/arm/mach-socfpga/include/mach/misc.h b/arch/arm/mach-socfpga/include/mach/misc.h
new file mode 100644
index 0000000..045268d
--- /dev/null
+++ b/arch/arm/mach-socfpga/include/mach/misc.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2016, Intel Corporation
+ *
+ * SPDX-License-Identifier:    GPL-2.0
+ */
+
+#ifndef _MISC_H_
+#define	_MISC_H_
+
+extern void dwmac_deassert_reset(const unsigned int of_reset_id,
+				 const u32 phymode);
+
+struct bsel{
+	const char	*mode;
+	const char	*name;
+};
+
+extern struct bsel bsel_str[];
+
+#ifdef CONFIG_FPGA
+extern void socfpga_fpga_add(void);
+#else
+inline void socfpga_fpga_add(void) {}
+#endif
+
+#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+unsigned int dedicated_uart_com_port(const void *blob);
+unsigned int shared_uart_com_port(const void *blob);
+unsigned int uart_com_port(const void *blob);
+#endif
+
+#endif /* _MISC_H_ */
diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c
index 510aa1d..7fd5c0e 100644
--- a/arch/arm/mach-socfpga/misc.c
+++ b/arch/arm/mach-socfpga/misc.c
@@ -1,5 +1,5 @@
 /*
- *  Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *  Copyright (C) 2012-2016 Altera Corporation <www.altera.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -7,45 +7,33 @@
 #include <common.h>
 #include <asm/io.h>
 #include <errno.h>
-#include <fdtdec.h>
-#include <libfdt.h>
 #include <altera.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <watchdog.h>
+#include <asm/arch/misc.h>
 #include <asm/arch/reset_manager.h>
-#include <asm/arch/scan_manager.h>
 #include <asm/arch/sdram_a10.h>
 #include <asm/arch/system_manager.h>
 #include <asm/arch/nic301.h>
 #include <asm/arch/scu.h>
 #include <asm/pl310.h>
 
-#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
-#include <dt-bindings/reset/altr,rst-mgr.h>
-#else
-#include <dt-bindings/reset/altr,rst-mgr-a10.h>
-#endif
-
 DECLARE_GLOBAL_DATA_PTR;
 
-static struct pl310_regs *const pl310 =
+static const struct pl310_regs *const pl310 =
 	(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
-static struct socfpga_system_manager *sysmgr_regs =
-	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
-static struct socfpga_reset_manager *reset_manager_base =
-	(struct socfpga_reset_manager *)SOCFPGA_RSTMGR_ADDRESS;
-#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
-static struct nic301_registers *nic301_regs =
-	(struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS;
-#else
-static const struct socfpga_noc_fw_ocram *noc_fw_ocram_base =
-	(void *)SOCFPGA_SDR_FIREWALL_OCRAM_ADDRESS;
-static const struct socfpga_noc_fw_ddr_l3 *noc_fw_ddr_l3_base =
-	(void *)SOCFPGA_SDR_FIREWALL_L3_ADDRESS;
-#endif
-static struct scu_registers *scu_regs =
-	(struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS;
+
+struct bsel	bsel_str[] = {
+	{ "rsvd", "Reserved", },
+	{ "fpga", "FPGA (HPS2FPGA Bridge)", },
+	{ "nand", "NAND Flash (1.8V)", },
+	{ "nand", "NAND Flash (3.0V)", },
+	{ "sd", "SD/MMC External Transceiver (1.8V)", },
+	{ "sd", "SD/MMC Internal Transceiver (3.0V)", },
+	{ "qspi", "QSPI Flash (1.8V)", },
+	{ "qspi", "QSPI Flash (3.0V)", },
+};
 
 int dram_init(void)
 {
@@ -84,219 +72,6 @@ void v7_outer_cache_disable(void)
 	clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
 }
 
-/*
- * DesignWare Ethernet initialization
- */
-#ifdef CONFIG_ETH_DESIGNWARE
-static void dwmac_deassert_reset(const unsigned int of_reset_id,
-				 const u32 phymode)
-{
-	u32 physhift, reset;
-
-	if (of_reset_id == EMAC0_RESET) {
-		physhift = SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB;
-		reset = SOCFPGA_RESET(EMAC0);
-	} else if (of_reset_id == EMAC1_RESET) {
-		physhift = SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB;
-		reset = SOCFPGA_RESET(EMAC1);
-#ifndef CONFIG_TARGET_SOCFPGA_GEN5
-	} else if (of_reset_id == EMAC2_RESET) {
-		reset = SOCFPGA_RESET(EMAC2);
-#endif
-	} else {
-		printf("GMAC: Invalid reset ID (%i)!\n", of_reset_id);
-		return;
-	}
-
-#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
-	/* configure to PHY interface select choosed */
-	clrsetbits_le32(&sysmgr_regs->emacgrp_ctrl,
-			SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift,
-			phymode << physhift);
-#else
-	clrsetbits_le32(&sysmgr_regs->emac[of_reset_id - EMAC0_RESET],
-			SYSMGR_EMACGRP_CTRL_PHYSEL_MASK,
-			phymode);
-#endif
-
-	/* Release the EMAC controller from reset */
-	socfpga_per_reset(reset, 0);
-}
-
-static u32 dwmac_phymode_to_modereg(const char *phymode, u32 *modereg)
-{
-	if (!phymode)
-		return -EINVAL;
-
-	if (!strcmp(phymode, "mii") || !strcmp(phymode, "gmii")) {
-		*modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
-		return 0;
-	}
-
-	if (!strcmp(phymode, "rgmii")) {
-		*modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII;
-		return 0;
-	}
-
-	if (!strcmp(phymode, "rmii")) {
-		*modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII;
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-static int socfpga_eth_reset(void)
-{
-	const void *fdt = gd->fdt_blob;
-	struct fdtdec_phandle_args args;
-	const char *phy_mode;
-	u32 phy_modereg;
-	int nodes[2];	/* Max. two GMACs */
-	int ret, count;
-	int i, node;
-
-	/* Put both GMACs into RESET state. */
-	socfpga_per_reset(SOCFPGA_RESET(EMAC0), 1);
-	socfpga_per_reset(SOCFPGA_RESET(EMAC1), 1);
-
-	count = fdtdec_find_aliases_for_id(fdt, "ethernet",
-					   COMPAT_ALTERA_SOCFPGA_DWMAC,
-					   nodes, ARRAY_SIZE(nodes));
-	for (i = 0; i < count; i++) {
-		node = nodes[i];
-		if (node <= 0)
-			continue;
-
-		ret = fdtdec_parse_phandle_with_args(fdt, node, "resets",
-						     "#reset-cells", 1, 0,
-						     &args);
-		if (ret || (args.args_count != 1)) {
-			debug("GMAC%i: Failed to parse DT 'resets'!\n", i);
-			continue;
-		}
-
-		phy_mode = fdt_getprop(fdt, node, "phy-mode", NULL);
-		ret = dwmac_phymode_to_modereg(phy_mode, &phy_modereg);
-		if (ret) {
-			debug("GMAC%i: Failed to parse DT 'phy-mode'!\n", i);
-			continue;
-		}
-
-		dwmac_deassert_reset(args.args[0], phy_modereg);
-	}
-
-	return 0;
-}
-#else
-static int socfpga_eth_reset(void)
-{
-	return 0;
-};
-#endif
-
-struct {
-	const char	*mode;
-	const char	*name;
-} bsel_str[] = {
-	{ "rsvd", "Reserved", },
-	{ "fpga", "FPGA (HPS2FPGA Bridge)", },
-	{ "nand", "NAND Flash (1.8V)", },
-	{ "nand", "NAND Flash (3.0V)", },
-	{ "sd", "SD/MMC External Transceiver (1.8V)", },
-	{ "sd", "SD/MMC Internal Transceiver (3.0V)", },
-	{ "qspi", "QSPI Flash (1.8V)", },
-	{ "qspi", "QSPI Flash (3.0V)", },
-};
-
-static const struct {
-	const u16	pn;
-	const char	*name;
-	const char	*var;
-} const socfpga_fpga_model[] = {
-	/* Cyclone V E */
-	{ 0x2b15, "Cyclone V, E/A2", "cv_e_a2" },
-	{ 0x2b05, "Cyclone V, E/A4", "cv_e_a4" },
-	{ 0x2b22, "Cyclone V, E/A5", "cv_e_a5" },
-	{ 0x2b13, "Cyclone V, E/A7", "cv_e_a7" },
-	{ 0x2b14, "Cyclone V, E/A9", "cv_e_a9" },
-	/* Cyclone V GX/GT */
-	{ 0x2b01, "Cyclone V, GX/C3", "cv_gx_c3" },
-	{ 0x2b12, "Cyclone V, GX/C4", "cv_gx_c4" },
-	{ 0x2b02, "Cyclone V, GX/C5 or GT/D5", "cv_gx_c5" },
-	{ 0x2b03, "Cyclone V, GX/C7 or GT/D7", "cv_gx_c7" },
-	{ 0x2b04, "Cyclone V, GX/C9 or GT/D9", "cv_gx_c9" },
-	/* Cyclone V SE/SX/ST */
-	{ 0x2d11, "Cyclone V, SE/A2 or SX/C2", "cv_se_a2" },
-	{ 0x2d01, "Cyclone V, SE/A4 or SX/C4", "cv_se_a4" },
-	{ 0x2d12, "Cyclone V, SE/A5 or SX/C5 or ST/D5", "cv_se_a5" },
-	{ 0x2d02, "Cyclone V, SE/A6 or SX/C6 or ST/D6", "cv_se_a6" },
-	/* Arria V */
-	{ 0x2d03, "Arria V, D5", "av_d5" },
-};
-
-static int socfpga_fpga_id(const bool print_id)
-{
-	const u32 altera_mi = 0x6e;
-	const u32 id = scan_mgr_get_fpga_id();
-
-	const u32 lsb = id & 0x00000001;
-	const u32 mi = (id >> 1) & 0x000007ff;
-	const u32 pn = (id >> 12) & 0x0000ffff;
-	const u32 version = (id >> 28) & 0x0000000f;
-	int i;
-
-	if ((mi != altera_mi) || (lsb != 1)) {
-		printf("FPGA:  Not Altera chip ID\n");
-		return -EINVAL;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(socfpga_fpga_model); i++)
-		if (pn == socfpga_fpga_model[i].pn)
-			break;
-
-	if (i == ARRAY_SIZE(socfpga_fpga_model)) {
-		printf("FPGA:  Unknown Altera chip, ID 0x%08x\n", id);
-		return -EINVAL;
-	}
-
-	if (print_id)
-		printf("FPGA:  Altera %s, version 0x%01x\n",
-		       socfpga_fpga_model[i].name, version);
-	return i;
-}
-
-/*
- * Print CPU information
- */
-#if defined(CONFIG_DISPLAY_CPUINFO)
-int print_cpuinfo(void)
-{
-	const u32 bsel = (readl(&sysmgr_regs->bootinfo) >>
-			  SYSMGR_BOOTINFO_BSEL_SHIFT) & 0x7;
-#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
-	puts("CPU:   Altera SoCFPGA Platform\n");
-	socfpga_fpga_id(1);
-#else
-	puts("CPU:   Altera SoCFPGA Arria 10\n");
-#endif
-	printf("BOOT:  %s\n", bsel_str[bsel].name);
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_ARCH_MISC_INIT
-int arch_misc_init(void)
-{
-	const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7;
-	const int fpga_id = socfpga_fpga_id(0);
-	setenv("bootmode", bsel_str[bsel].mode);
-	if (fpga_id >= 0)
-		setenv("fpgatype", socfpga_fpga_model[fpga_id].var);
-	return socfpga_eth_reset();
-}
-#endif
-
 #if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && \
 defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE)
 int overwrite_console(void)
@@ -327,15 +102,13 @@ static Altera_desc altera_fpga[] = {
 };
 
 /* add device descriptor to FPGA device table */
-static void socfpga_fpga_add(void)
+void socfpga_fpga_add(void)
 {
 	int i;
 	fpga_init();
 	for (i = 0; i < ARRAY_SIZE(altera_fpga); i++)
 		fpga_add(fpga_altera, &altera_fpga[i]);
 }
-#else
-static inline void socfpga_fpga_add(void) {}
 #endif
 
 int arch_cpu_init(void)
@@ -361,173 +134,3 @@ int arch_cpu_init(void)
 
 	return 0;
 }
-
-#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
-/*
- * Convert all NIC-301 AMBA slaves from secure to non-secure
- */
-static void socfpga_nic301_slave_ns(void)
-{
-	writel(0x1, &nic301_regs->lwhps2fpgaregs);
-	writel(0x1, &nic301_regs->hps2fpgaregs);
-	writel(0x1, &nic301_regs->acp);
-	writel(0x1, &nic301_regs->rom);
-	writel(0x1, &nic301_regs->ocram);
-	writel(0x1, &nic301_regs->sdrdata);
-}
-
-static uint32_t iswgrp_handoff[8];
-
-int arch_early_init_r(void)
-{
-	int i;
-
-	/*
-	 * Write magic value into magic register to unlock support for
-	 * issuing warm reset. The ancient kernel code expects this
-	 * value to be written into the register by the bootloader, so
-	 * to support that old code, we write it here instead of in the
-	 * reset_cpu() function just before resetting the CPU.
-	 */
-	writel(0xae9efebc, &sysmgr_regs->romcodegrp_warmramgrp_enable);
-
-	for (i = 0; i < 8; i++)	/* Cache initial SW setting regs */
-		iswgrp_handoff[i] = readl(&sysmgr_regs->iswgrp_handoff[i]);
-
-	socfpga_bridges_reset(1);
-	socfpga_nic301_slave_ns();
-
-	/*
-	 * Private components security:
-	 * U-Boot : configure private timer, global timer and cpu component
-	 * access as non secure for kernel stage (as required by Linux)
-	 */
-	setbits_le32(&scu_regs->sacr, 0xfff);
-
-	/* Configure the L2 controller to make SDRAM start at 0 */
-#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
-	writel(0x2, &nic301_regs->remap);
-#else
-	writel(0x1, &nic301_regs->remap);	/* remap.mpuzero */
-	writel(0x1, &pl310->pl310_addr_filter_start);
-#endif
-
-	/* Add device descriptor to FPGA device table */
-	socfpga_fpga_add();
-
-#ifdef CONFIG_DESIGNWARE_SPI
-	/* Get Designware SPI controller out of reset */
-	socfpga_per_reset(SOCFPGA_RESET(SPIM0), 0);
-	socfpga_per_reset(SOCFPGA_RESET(SPIM1), 0);
-#endif
-
-#ifdef CONFIG_NAND_DENALI
-	socfpga_per_reset(SOCFPGA_RESET(NAND), 0);
-#endif
-
-	return 0;
-}
-
-static void socfpga_sdram_apply_static_cfg(void)
-{
-	const uint32_t staticcfg = SOCFPGA_SDR_ADDRESS + 0x505c;
-	const uint32_t applymask = 0x8;
-	uint32_t val = readl(staticcfg) | applymask;
-
-	/*
-	 * SDRAM staticcfg register specific:
-	 * When applying the register setting, the CPU must not access
-	 * SDRAM. Luckily for us, we can abuse i-cache here to help us
-	 * circumvent the SDRAM access issue. The idea is to make sure
-	 * that the code is in one full i-cache line by branching past
-	 * it and back. Once it is in the i-cache, we execute the core
-	 * of the code and apply the register settings.
-	 *
-	 * The code below uses 7 instructions, while the Cortex-A9 has
-	 * 32-byte cachelines, thus the limit is 8 instructions total.
-	 */
-	asm volatile(
-		".align	5			\n"
-		"	b	2f		\n"
-		"1:	str	%0,	[%1]	\n"
-		"	dsb			\n"
-		"	isb			\n"
-		"	b	3f		\n"
-		"2:	b	1b		\n"
-		"3:	nop			\n"
-	: : "r"(val), "r"(staticcfg) : "memory", "cc");
-}
-
-int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	if (argc != 2)
-		return CMD_RET_USAGE;
-
-	argv++;
-
-	switch (*argv[0]) {
-	case 'e':	/* Enable */
-		writel(iswgrp_handoff[2], &sysmgr_regs->fpgaintfgrp_module);
-		socfpga_sdram_apply_static_cfg();
-		writel(iswgrp_handoff[3], SOCFPGA_SDR_ADDRESS + 0x5080);
-		writel(iswgrp_handoff[0], &reset_manager_base->brg_mod_reset);
-		writel(iswgrp_handoff[1], &nic301_regs->remap);
-		break;
-	case 'd':	/* Disable */
-		writel(0, &sysmgr_regs->fpgaintfgrp_module);
-		writel(0, SOCFPGA_SDR_ADDRESS + 0x5080);
-		socfpga_sdram_apply_static_cfg();
-		writel(0, &reset_manager_base->brg_mod_reset);
-		writel(1, &nic301_regs->remap);
-		break;
-	default:
-		return CMD_RET_USAGE;
-	}
-
-	return 0;
-}
-#else
-/*
-+ * This function initializes security policies to be consistent across
-+ * all logic units in the Arria 10.
-+ *
-+ * The idea is to set all security policies to be normal, nonsecure
-+ * for all units.
-+ */
-static void initialize_security_policies(void)
-{
-	/* Put OCRAM in non-secure */
-	writel(0x003f0000, &noc_fw_ocram_base->region0);
-	writel(0x1, &noc_fw_ocram_base->enable);
-
-	/* Put DDR in non-secure */
-	writel(0xffff0000, &noc_fw_ddr_l3_base->hpsregion0addr);
-	writel(0x1, &noc_fw_ddr_l3_base->enable);
-}
-
-int arch_early_init_r(void)
-{
-	initialize_security_policies();
-
-	/* Configure the L2 controller to make SDRAM start at 0 */
-	writel(0x1, &pl310->pl310_addr_filter_start);
-
-	/* assert reset to all except L4WD0 and L4TIMER0 */
-	socfpga_per_reset_all();
-
-	/* configuring the clock based on handoff */
-	/* TODO: Add call to cm_basic_init() */
-
-	/* Add device descriptor to FPGA device table */
-	socfpga_fpga_add();
-	return 0;
-}
-#endif
-
-U_BOOT_CMD(
-	bridge, 2, 1, do_bridge,
-	"SoCFPGA HPS FPGA bridge control",
-	"enable  - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
-	"bridge disable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
-	""
-);
diff --git a/arch/arm/mach-socfpga/misc_arria10.c b/arch/arm/mach-socfpga/misc_arria10.c
new file mode 100644
index 0000000..6c50515
--- /dev/null
+++ b/arch/arm/mach-socfpga/misc_arria10.c
@@ -0,0 +1,255 @@
+/*
+ * Copyright (C) 2016, Intel Corporation
+ *
+ * SPDX-License-Identifier:    GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <altera.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <watchdog.h>
+#include <asm/arch/misc.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/arch/sdram_a10.h>
+#include <asm/arch/system_manager.h>
+#include <asm/arch/nic301.h>
+#include <asm/pl310.h>
+#include <fdtdec.h>
+#include <ns16550.h>
+
+#define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q1_3	0x08
+#define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q2_11	0x58
+#define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q3_3	0x68
+#define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q1_7	0x18
+#define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q3_7	0x78
+#define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q4_3	0x98
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int find_peripheral_uart(const void *blob,
+	int child, const char *node_name);
+static int is_peripheral_uart_true(const void *blob,
+	int node, const char *child_name);
+
+static struct pl310_regs *const pl310 =
+	(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
+static struct socfpga_system_manager *sysmgr_regs =
+	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
+static const struct socfpga_noc_fw_ocram *noc_fw_ocram_base =
+	(void *)SOCFPGA_SDR_FIREWALL_OCRAM_ADDRESS;
+static const struct socfpga_noc_fw_ddr_l3 *noc_fw_ddr_l3_base =
+	(void *)SOCFPGA_SDR_FIREWALL_L3_ADDRESS;
+
+/*
+ * DesignWare Ethernet initialization
+ */
+#ifdef CONFIG_ETH_DESIGNWARE
+void dwmac_deassert_reset(const unsigned int of_reset_id,
+				 const u32 phymode)
+{
+	u32 reset;
+
+	if (of_reset_id == EMAC0_RESET) {
+		reset = SOCFPGA_RESET(EMAC0);
+	} else if (of_reset_id == EMAC1_RESET) {
+		reset = SOCFPGA_RESET(EMAC1);
+	} else if (of_reset_id == EMAC2_RESET) {
+		reset = SOCFPGA_RESET(EMAC2);
+	} else {
+		printf("GMAC: Invalid reset ID (%i)!\n", of_reset_id);
+		return;
+	}
+
+	clrsetbits_le32(&sysmgr_regs->emac[of_reset_id - EMAC0_RESET],
+			SYSMGR_EMACGRP_CTRL_PHYSEL_MASK,
+			phymode);
+
+	/* Release the EMAC controller from reset */
+	socfpga_per_reset(reset, 0);
+}
+#endif
+
+/*
++ * This function initializes security policies to be consistent across
++ * all logic units in the Arria 10.
++ *
++ * The idea is to set all security policies to be normal, nonsecure
++ * for all units.
++ */
+static void initialize_security_policies(void)
+{
+	/* Put OCRAM in non-secure */
+	writel(0x003f0000, &noc_fw_ocram_base->region0);
+	writel(0x1, &noc_fw_ocram_base->enable);
+
+	/* Put DDR in non-secure */
+	writel(0xffff0000, &noc_fw_ddr_l3_base->hpsregion0addr);
+	writel(0x1, &noc_fw_ddr_l3_base->enable);
+}
+
+int arch_early_init_r(void)
+{
+	initialize_security_policies();
+
+	/* Configure the L2 controller to make SDRAM start at 0 */
+	writel(0x1, &pl310->pl310_addr_filter_start);
+
+	/* assert reset to all except L4WD0 and L4TIMER0 */
+	socfpga_per_reset_all();
+
+	/* configuring the clock based on handoff */
+	/* TODO: Add call to cm_basic_init() */
+
+	/* Add device descriptor to FPGA device table */
+	socfpga_fpga_add();
+	return 0;
+}
+
+/*
+ * This function looking the 1st encounter UART peripheral,
+ * and then return its offset of the dedicated/shared IO pin
+ * mux. offset value (zero and above).
+ */
+static int find_peripheral_uart(const void *blob,
+	int child, const char *node_name)
+{
+	int len;
+	fdt_addr_t base_addr = 0;
+	fdt_size_t size;
+	const u32 *cell;
+	u32 value, offset = 0;
+
+	base_addr = fdtdec_get_addr_size(blob, child, "reg", &size);
+	if (base_addr != FDT_ADDR_T_NONE) {
+		cell = fdt_getprop(blob, child, "pinctrl-single,pins",
+			&len);
+		if (cell != NULL) {
+			for (; len > 0; len -= (2 * sizeof(u32))) {
+				offset = fdt32_to_cpu(*cell++);
+				value = fdt32_to_cpu(*cell++);
+				/* Found UART peripheral */
+				if (0x0D == value)
+					return offset;
+			}
+		}
+	}
+	return -1;
+}
+
+/*
+ * This function looking the 1st encounter UART peripheral,
+ * and then return its offset of the dedicated/shared IO pin
+ * mux. UART peripheral is found if the offset is not in negative
+ * value.
+ */
+static int is_peripheral_uart_true(const void *blob,
+	int node, const char *child_name)
+{
+	int child, len;
+	const char *node_name;
+
+	child = fdt_first_subnode(blob, node);
+
+	if (child < 0)
+		return -1;
+
+	node_name = fdt_get_name(blob, child, &len);
+
+	while (node_name) {
+		if (!strcmp(child_name, node_name))
+			return find_peripheral_uart(blob, child, node_name);
+
+		child = fdt_next_subnode(blob, child);
+
+		if (child < 0)
+			break;
+
+		node_name = fdt_get_name(blob, child, &len);
+	}
+
+	return -1;
+}
+
+/*
+ * This function looking the 1st encounter UART dedicated IO peripheral,
+ * and then return based address of the 1st encounter UART dedicated
+ * IO peripheral.
+ */
+unsigned int dedicated_uart_com_port(const void *blob)
+{
+	int node;
+
+	node = fdtdec_next_compatible(blob, 0,
+		 COMPAT_ALTERA_SOCFPGA_PINCTRL_SINGLE);
+
+	if (node < 0)
+		return 0;
+
+	if (0 <= is_peripheral_uart_true(blob, node, "dedicated"))
+		return SOCFPGA_UART1_ADDRESS;
+	else
+		return 0;
+}
+
+/*
+ * This function looking the 1st encounter UART shared IO peripheral, and then
+ * return based address of the 1st encounter UART shared IO peripheral.
+ */
+unsigned int shared_uart_com_port(const void *blob)
+{
+	int node, ret;
+
+	node = fdtdec_next_compatible(blob, 0,
+		 COMPAT_ALTERA_SOCFPGA_PINCTRL_SINGLE);
+
+	if (node < 0)
+		return 0;
+
+	ret = is_peripheral_uart_true(blob, node, "shared");
+
+	if (PINMUX_UART0_TX_SHARED_IO_OFFSET_Q1_3 == ret ||
+		PINMUX_UART0_TX_SHARED_IO_OFFSET_Q2_11 == ret ||
+		PINMUX_UART0_TX_SHARED_IO_OFFSET_Q3_3 == ret)
+		return SOCFPGA_UART0_ADDRESS;
+	else if (PINMUX_UART1_TX_SHARED_IO_OFFSET_Q1_7 == ret ||
+		PINMUX_UART1_TX_SHARED_IO_OFFSET_Q3_7 == ret ||
+		PINMUX_UART1_TX_SHARED_IO_OFFSET_Q4_3 == ret)
+		return SOCFPGA_UART1_ADDRESS;
+	else
+		return 0;
+}
+
+/*
+ * This function looking the 1st encounter UART peripheral, and then return
+ * base address of the 1st encounter UART peripheral.
+ */
+unsigned int uart_com_port(const void *blob)
+{
+	unsigned int ret;
+
+	ret = dedicated_uart_com_port(blob);
+
+	if (ret)
+		return ret;
+
+	return shared_uart_com_port(blob);
+}
+
+/*
+ * Print CPU information
+ */
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	const u32 bsel = (readl(&sysmgr_regs->bootinfo) >>
+			  SYSMGR_BOOTINFO_BSEL_SHIFT) & 0x7;
+
+	puts("CPU:   Altera SoCFPGA Arria 10\n");
+
+	printf("BOOT:  %s\n", bsel_str[bsel].name);
+	return 0;
+}
+#endif
diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc_gen5.c
similarity index 66%
copy from arch/arm/mach-socfpga/misc.c
copy to arch/arm/mach-socfpga/misc_gen5.c
index 510aa1d..b91aeb1 100644
--- a/arch/arm/mach-socfpga/misc.c
+++ b/arch/arm/mach-socfpga/misc_gen5.c
@@ -1,7 +1,7 @@
 /*
- *  Copyright (C) 2012 Altera Corporation <www.altera.com>
+ * Copyright (C) 2016, Intel Corporation
  *
- * SPDX-License-Identifier:	GPL-2.0+
+ * SPDX-License-Identifier:    GPL-2.0
  */
 
 #include <common.h>
@@ -13,6 +13,7 @@
 #include <miiphy.h>
 #include <netdev.h>
 #include <watchdog.h>
+#include <asm/arch/misc.h>
 #include <asm/arch/reset_manager.h>
 #include <asm/arch/scan_manager.h>
 #include <asm/arch/sdram_a10.h>
@@ -20,12 +21,7 @@
 #include <asm/arch/nic301.h>
 #include <asm/arch/scu.h>
 #include <asm/pl310.h>
-
-#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 #include <dt-bindings/reset/altr,rst-mgr.h>
-#else
-#include <dt-bindings/reset/altr,rst-mgr-a10.h>
-#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -35,94 +31,47 @@ static struct socfpga_system_manager *sysmgr_regs =
 	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
 static struct socfpga_reset_manager *reset_manager_base =
 	(struct socfpga_reset_manager *)SOCFPGA_RSTMGR_ADDRESS;
-#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 static struct nic301_registers *nic301_regs =
 	(struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS;
-#else
-static const struct socfpga_noc_fw_ocram *noc_fw_ocram_base =
-	(void *)SOCFPGA_SDR_FIREWALL_OCRAM_ADDRESS;
-static const struct socfpga_noc_fw_ddr_l3 *noc_fw_ddr_l3_base =
-	(void *)SOCFPGA_SDR_FIREWALL_L3_ADDRESS;
-#endif
 static struct scu_registers *scu_regs =
 	(struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS;
 
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
-	return 0;
-}
-
-void enable_caches(void)
-{
-#ifndef CONFIG_SYS_ICACHE_OFF
-	icache_enable();
-#endif
-#ifndef CONFIG_SYS_DCACHE_OFF
-	dcache_enable();
-#endif
-}
-
-void v7_outer_cache_enable(void)
-{
-	/* Disable the L2 cache */
-	clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
-
-	/* enable BRESP, instruction and data prefetch, full line of zeroes */
-	setbits_le32(&pl310->pl310_aux_ctrl,
-		     L310_AUX_CTRL_DATA_PREFETCH_MASK |
-		     L310_AUX_CTRL_INST_PREFETCH_MASK |
-		     L310_SHARED_ATT_OVERRIDE_ENABLE);
-
-	/* Enable the L2 cache */
-	setbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
-}
-
-void v7_outer_cache_disable(void)
-{
-	/* Disable the L2 cache */
-	clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
-}
-
 /*
  * DesignWare Ethernet initialization
  */
 #ifdef CONFIG_ETH_DESIGNWARE
-static void dwmac_deassert_reset(const unsigned int of_reset_id,
+void dwmac_deassert_reset(const unsigned int of_reset_id,
 				 const u32 phymode)
 {
-	u32 physhift, reset;
+	u32 physhift;
+	u32 reset;
 
 	if (of_reset_id == EMAC0_RESET) {
 		physhift = SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB;
+
 		reset = SOCFPGA_RESET(EMAC0);
 	} else if (of_reset_id == EMAC1_RESET) {
 		physhift = SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB;
+
 		reset = SOCFPGA_RESET(EMAC1);
-#ifndef CONFIG_TARGET_SOCFPGA_GEN5
-	} else if (of_reset_id == EMAC2_RESET) {
-		reset = SOCFPGA_RESET(EMAC2);
-#endif
-	} else {
+	}
+	else {
 		printf("GMAC: Invalid reset ID (%i)!\n", of_reset_id);
 		return;
 	}
 
-#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 	/* configure to PHY interface select choosed */
 	clrsetbits_le32(&sysmgr_regs->emacgrp_ctrl,
 			SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift,
 			phymode << physhift);
-#else
-	clrsetbits_le32(&sysmgr_regs->emac[of_reset_id - EMAC0_RESET],
-			SYSMGR_EMACGRP_CTRL_PHYSEL_MASK,
-			phymode);
-#endif
 
 	/* Release the EMAC controller from reset */
 	socfpga_per_reset(reset, 0);
 }
 
+/*
+ * DesignWare Ethernet initialization
+ */
 static u32 dwmac_phymode_to_modereg(const char *phymode, u32 *modereg)
 {
 	if (!phymode)
@@ -195,20 +144,6 @@ static int socfpga_eth_reset(void)
 };
 #endif
 
-struct {
-	const char	*mode;
-	const char	*name;
-} bsel_str[] = {
-	{ "rsvd", "Reserved", },
-	{ "fpga", "FPGA (HPS2FPGA Bridge)", },
-	{ "nand", "NAND Flash (1.8V)", },
-	{ "nand", "NAND Flash (3.0V)", },
-	{ "sd", "SD/MMC External Transceiver (1.8V)", },
-	{ "sd", "SD/MMC Internal Transceiver (3.0V)", },
-	{ "qspi", "QSPI Flash (1.8V)", },
-	{ "qspi", "QSPI Flash (3.0V)", },
-};
-
 static const struct {
 	const u16	pn;
 	const char	*name;
@@ -266,25 +201,6 @@ static int socfpga_fpga_id(const bool print_id)
 	return i;
 }
 
-/*
- * Print CPU information
- */
-#if defined(CONFIG_DISPLAY_CPUINFO)
-int print_cpuinfo(void)
-{
-	const u32 bsel = (readl(&sysmgr_regs->bootinfo) >>
-			  SYSMGR_BOOTINFO_BSEL_SHIFT) & 0x7;
-#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
-	puts("CPU:   Altera SoCFPGA Platform\n");
-	socfpga_fpga_id(1);
-#else
-	puts("CPU:   Altera SoCFPGA Arria 10\n");
-#endif
-	printf("BOOT:  %s\n", bsel_str[bsel].name);
-	return 0;
-}
-#endif
-
 #ifdef CONFIG_ARCH_MISC_INIT
 int arch_misc_init(void)
 {
@@ -297,72 +213,6 @@ int arch_misc_init(void)
 }
 #endif
 
-#if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && \
-defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE)
-int overwrite_console(void)
-{
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_FPGA
-/*
- * FPGA programming support for SoC FPGA Cyclone V
- */
-static Altera_desc altera_fpga[] = {
-	{
-		/* Family */
-		Altera_SoCFPGA,
-		/* Interface type */
-		fast_passive_parallel,
-		/* No limitation as additional data will be ignored */
-		-1,
-		/* No device function table */
-		NULL,
-		/* Base interface address specified in driver */
-		NULL,
-		/* No cookie implementation */
-		0
-	},
-};
-
-/* add device descriptor to FPGA device table */
-static void socfpga_fpga_add(void)
-{
-	int i;
-	fpga_init();
-	for (i = 0; i < ARRAY_SIZE(altera_fpga); i++)
-		fpga_add(fpga_altera, &altera_fpga[i]);
-}
-#else
-static inline void socfpga_fpga_add(void) {}
-#endif
-
-int arch_cpu_init(void)
-{
-#ifdef CONFIG_HW_WATCHDOG
-	/*
-	 * In case the watchdog is enabled, make sure to (re-)configure it
-	 * so that the defined timeout is valid. Otherwise the SPL (Perloader)
-	 * timeout value is still active which might too short for Linux
-	 * booting.
-	 */
-	hw_watchdog_init();
-#else
-	/*
-	 * If the HW watchdog is NOT enabled, make sure it is not running,
-	 * for example because it was enabled in the preloader. This might
-	 * trigger a watchdog-triggered reboot of Linux kernel later.
-	 * Toggle watchdog reset, so watchdog in not running state.
-	 */
-	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 1);
-	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 0);
-#endif
-
-	return 0;
-}
-
-#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 /*
  * Convert all NIC-301 AMBA slaves from secure to non-secure
  */
@@ -387,7 +237,7 @@ int arch_early_init_r(void)
 	 * issuing warm reset. The ancient kernel code expects this
 	 * value to be written into the register by the bootloader, so
 	 * to support that old code, we write it here instead of in the
-	 * reset_cpu() function just before resetting the CPU.
+	 * reset_cpu() function just before reseting the CPU.
 	 */
 	writel(0xae9efebc, &sysmgr_regs->romcodegrp_warmramgrp_enable);
 
@@ -486,43 +336,6 @@ int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 	return 0;
 }
-#else
-/*
-+ * This function initializes security policies to be consistent across
-+ * all logic units in the Arria 10.
-+ *
-+ * The idea is to set all security policies to be normal, nonsecure
-+ * for all units.
-+ */
-static void initialize_security_policies(void)
-{
-	/* Put OCRAM in non-secure */
-	writel(0x003f0000, &noc_fw_ocram_base->region0);
-	writel(0x1, &noc_fw_ocram_base->enable);
-
-	/* Put DDR in non-secure */
-	writel(0xffff0000, &noc_fw_ddr_l3_base->hpsregion0addr);
-	writel(0x1, &noc_fw_ddr_l3_base->enable);
-}
-
-int arch_early_init_r(void)
-{
-	initialize_security_policies();
-
-	/* Configure the L2 controller to make SDRAM start at 0 */
-	writel(0x1, &pl310->pl310_addr_filter_start);
-
-	/* assert reset to all except L4WD0 and L4TIMER0 */
-	socfpga_per_reset_all();
-
-	/* configuring the clock based on handoff */
-	/* TODO: Add call to cm_basic_init() */
-
-	/* Add device descriptor to FPGA device table */
-	socfpga_fpga_add();
-	return 0;
-}
-#endif
 
 U_BOOT_CMD(
 	bridge, 2, 1, do_bridge,
@@ -531,3 +344,20 @@ U_BOOT_CMD(
 	"bridge disable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
 	""
 );
+
+/*
+ * Print CPU information
+ */
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	const u32 bsel = (readl(&sysmgr_regs->bootinfo) >>
+			  SYSMGR_BOOTINFO_BSEL_SHIFT) & 0x7;
+
+	puts("CPU:   Altera SoCFPGA Platform\n");
+	socfpga_fpga_id(1);
+
+	printf("BOOT:  %s\n", bsel_str[bsel].name);
+	return 0;
+}
+#endif
-- 
1.7.7.4

[U-Boot] [v3 27/30] arm: socfpga: arria10: Added drivers for Arria10 clock manager

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

The drivers is restructured such common functions, gen5 functions, and
arria10 functions are moved to clock_manager.c, clock_manager_gen5 and
clock_manager_arria10 respectively.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dingnuyen@kernel.org>
Cc: Ching Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
Changes for V3
- no changes
Changes for V2
- Reverted license changes, removing extern and volatile declaration.
---
 arch/arm/mach-socfpga/clock_manager.c              |  752 +++++++---------
 arch/arm/mach-socfpga/clock_manager_arria10.c      |  954 ++++++++++++++++++++
 .../{clock_manager.c => clock_manager_gen5.c}      |  240 +-----
 arch/arm/mach-socfpga/include/mach/clock_manager.h |  356 ++++++--
 4 files changed, 1573 insertions(+), 729 deletions(-)
 create mode 100644 arch/arm/mach-socfpga/clock_manager_arria10.c
 copy arch/arm/mach-socfpga/{clock_manager.c => clock_manager_gen5.c} (62%)

diff --git a/arch/arm/mach-socfpga/clock_manager.c b/arch/arm/mach-socfpga/clock_manager.c
index aa71636..d209f7d 100644
--- a/arch/arm/mach-socfpga/clock_manager.c
+++ b/arch/arm/mach-socfpga/clock_manager.c
@@ -1,5 +1,5 @@
 /*
- *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *  Copyright (C) 2013-2016 Altera Corporation <www.altera.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -7,416 +7,287 @@
 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/clock_manager.h>
+#include <fdtdec.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
+/* Function prototypes */
+/* Common prototypes */
+unsigned int cm_get_l4_sp_clk_hz(void);
+unsigned int cm_get_qspi_controller_clk_hz(void);
+unsigned int cm_get_mmc_controller_clk_hz(void);
+unsigned int cm_get_spi_controller_clk_hz(void);
+static void cm_print_clock_quick_summary(void);
+int do_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
+void cm_wait_for_lock(uint32_t mask);
+void cm_wait_for_fsm(void);
+unsigned int cm_get_main_vco_clk_hz(void);
+unsigned int cm_get_per_vco_clk_hz(void);
+unsigned long cm_get_mpu_clk_hz(void);
+
 static const struct socfpga_clock_manager *clock_manager_base =
 	(struct socfpga_clock_manager *)SOCFPGA_CLKMGR_ADDRESS;
 
-static void cm_wait_for_lock(uint32_t mask)
+/* Common functions */
+int set_cpu_clk_info(void)
 {
-	register uint32_t inter_val;
-	uint32_t retry = 0;
-	do {
-		inter_val = readl(&clock_manager_base->inter) & mask;
-		if (inter_val == mask)
-			retry++;
-		else
-			retry = 0;
-		if (retry >= 10)
-			break;
-	} while (1);
-}
+	/* Calculate the clock frequencies required for drivers */
+	cm_get_l4_sp_clk_hz();
+	cm_get_mmc_controller_clk_hz();
 
-/* function to poll in the fsm busy bit */
-static void cm_wait_for_fsm(void)
-{
-	while (readl(&clock_manager_base->stat) & CLKMGR_STAT_BUSY)
-		;
-}
+	gd->bd->bi_arm_freq = cm_get_mpu_clk_hz() / 1000000;
+	gd->bd->bi_dsp_freq = 0;
 
-/*
- * function to write the bypass register which requires a poll of the
- * busy bit
- */
-static void cm_write_bypass(uint32_t val)
-{
-	writel(val, &clock_manager_base->bypass);
-	cm_wait_for_fsm();
-}
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+	gd->bd->bi_ddr_freq = cm_get_sdram_clk_hz() / 1000000;
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+	gd->bd->bi_ddr_freq = 0;
+#endif
 
-/* function to write the ctrl register which requires a poll of the busy bit */
-static void cm_write_ctrl(uint32_t val)
-{
-	writel(val, &clock_manager_base->ctrl);
-	cm_wait_for_fsm();
+	return 0;
 }
 
-/* function to write a clock register that has phase information */
-static void cm_write_with_phase(uint32_t value,
-				uint32_t reg_address, uint32_t mask)
+unsigned int cm_get_spi_controller_clk_hz(void)
 {
-	/* poll until phase is zero */
-	while (readl(reg_address) & mask)
-		;
+	uint32_t clock = 0;
 
-	writel(value, reg_address);
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+	uint32_t reg;
+	clock = cm_get_per_vco_clk_hz();
 
-	while (readl(reg_address) & mask)
-		;
-}
+	/* get the clock prior L4 SP divider (periph_base_clk) */
+	reg = readl(&clock_manager_base->per_pll.perbaseclk);
+	clock /= (reg + 1);
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+	clock = cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MPCLK_LSB);
+#endif
 
-/*
- * Setup clocks while making no assumptions about previous state of the clocks.
- *
- * Start by being paranoid and gate all sw managed clocks
- * Put all plls in bypass
- * Put all plls VCO registers back to reset value (bandgap power down).
- * Put peripheral and main pll src to reset value to avoid glitch.
- * Delay 5 us.
- * Deassert bandgap power down and set numerator and denominator
- * Start 7 us timer.
- * set internal dividers
- * Wait for 7 us timer.
- * Enable plls
- * Set external dividers while plls are locking
- * Wait for pll lock
- * Assert/deassert outreset all.
- * Take all pll's out of bypass
- * Clear safe mode
- * set source main and peripheral clocks
- * Ungate clocks
- */
+	return clock;
+}
 
-void cm_basic_init(const struct cm_config * const cfg)
+unsigned int cm_get_qspi_controller_clk_hz(void)
 {
-	unsigned long end;
-
-	/* Start by being paranoid and gate all sw managed clocks */
-
-	/*
-	 * We need to disable nandclk
-	 * and then do another apb access before disabling
-	 * gatting off the rest of the periperal clocks.
-	 */
-	writel(~CLKMGR_PERPLLGRP_EN_NANDCLK_MASK &
-		readl(&clock_manager_base->per_pll.en),
-		&clock_manager_base->per_pll.en);
-
-	/* DO NOT GATE OFF DEBUG CLOCKS & BRIDGE CLOCKS */
-	writel(CLKMGR_MAINPLLGRP_EN_DBGTIMERCLK_MASK |
-		CLKMGR_MAINPLLGRP_EN_DBGTRACECLK_MASK |
-		CLKMGR_MAINPLLGRP_EN_DBGCLK_MASK |
-		CLKMGR_MAINPLLGRP_EN_DBGATCLK_MASK |
-		CLKMGR_MAINPLLGRP_EN_S2FUSER0CLK_MASK |
-		CLKMGR_MAINPLLGRP_EN_L4MPCLK_MASK,
-		&clock_manager_base->main_pll.en);
-
-	writel(0, &clock_manager_base->sdr_pll.en);
-
-	/* now we can gate off the rest of the peripheral clocks */
-	writel(0, &clock_manager_base->per_pll.en);
-
-	/* Put all plls in bypass */
-	cm_write_bypass(CLKMGR_BYPASS_PERPLL | CLKMGR_BYPASS_SDRPLL |
-			CLKMGR_BYPASS_MAINPLL);
-
-	/* Put all plls VCO registers back to reset value. */
-	writel(CLKMGR_MAINPLLGRP_VCO_RESET_VALUE &
-	       ~CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK,
-	       &clock_manager_base->main_pll.vco);
-	writel(CLKMGR_PERPLLGRP_VCO_RESET_VALUE &
-	       ~CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK,
-	       &clock_manager_base->per_pll.vco);
-	writel(CLKMGR_SDRPLLGRP_VCO_RESET_VALUE &
-	       ~CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK,
-	       &clock_manager_base->sdr_pll.vco);
-
-	/*
-	 * The clocks to the flash devices and the L4_MAIN clocks can
-	 * glitch when coming out of safe mode if their source values
-	 * are different from their reset value.  So the trick it to
-	 * put them back to their reset state, and change input
-	 * after exiting safe mode but before ungating the clocks.
-	 */
-	writel(CLKMGR_PERPLLGRP_SRC_RESET_VALUE,
-	       &clock_manager_base->per_pll.src);
-	writel(CLKMGR_MAINPLLGRP_L4SRC_RESET_VALUE,
-	       &clock_manager_base->main_pll.l4src);
-
-	/* read back for the required 5 us delay. */
-	readl(&clock_manager_base->main_pll.vco);
-	readl(&clock_manager_base->per_pll.vco);
-	readl(&clock_manager_base->sdr_pll.vco);
-
-
-	/*
-	 * We made sure bgpwr down was assert for 5 us. Now deassert BG PWR DN
-	 * with numerator and denominator.
-	 */
-	writel(cfg->main_vco_base, &clock_manager_base->main_pll.vco);
-	writel(cfg->peri_vco_base, &clock_manager_base->per_pll.vco);
-	writel(cfg->sdram_vco_base, &clock_manager_base->sdr_pll.vco);
-
-	/*
-	 * Time starts here. Must wait 7 us from
-	 * BGPWRDN_SET(0) to VCO_ENABLE_SET(1).
-	 */
-	end = timer_get_us() + 7;
-
-	/* main mpu */
-	writel(cfg->mpuclk, &clock_manager_base->main_pll.mpuclk);
-
-	/* main main clock */
-	writel(cfg->mainclk, &clock_manager_base->main_pll.mainclk);
-
-	/* main for dbg */
-	writel(cfg->dbgatclk, &clock_manager_base->main_pll.dbgatclk);
-
-	/* main for cfgs2fuser0clk */
-	writel(cfg->cfg2fuser0clk,
-	       &clock_manager_base->main_pll.cfgs2fuser0clk);
-
-	/* Peri emac0 50 MHz default to RMII */
-	writel(cfg->emac0clk, &clock_manager_base->per_pll.emac0clk);
-
-	/* Peri emac1 50 MHz default to RMII */
-	writel(cfg->emac1clk, &clock_manager_base->per_pll.emac1clk);
-
-	/* Peri QSPI */
-	writel(cfg->mainqspiclk, &clock_manager_base->main_pll.mainqspiclk);
-
-	writel(cfg->perqspiclk, &clock_manager_base->per_pll.perqspiclk);
-
-	/* Peri pernandsdmmcclk */
-	writel(cfg->mainnandsdmmcclk,
-	       &clock_manager_base->main_pll.mainnandsdmmcclk);
-
-	writel(cfg->pernandsdmmcclk,
-	       &clock_manager_base->per_pll.pernandsdmmcclk);
-
-	/* Peri perbaseclk */
-	writel(cfg->perbaseclk, &clock_manager_base->per_pll.perbaseclk);
-
-	/* Peri s2fuser1clk */
-	writel(cfg->s2fuser1clk, &clock_manager_base->per_pll.s2fuser1clk);
-
-	/* 7 us must have elapsed before we can enable the VCO */
-	while (timer_get_us() < end)
-		;
-
-	/* Enable vco */
-	/* main pll vco */
-	writel(cfg->main_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
-	       &clock_manager_base->main_pll.vco);
+	uint32_t clock = 0;
 
-	/* periferal pll */
-	writel(cfg->peri_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
-	       &clock_manager_base->per_pll.vco);
-
-	/* sdram pll vco */
-	writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
-	       &clock_manager_base->sdr_pll.vco);
-
-	/* L3 MP and L3 SP */
-	writel(cfg->maindiv, &clock_manager_base->main_pll.maindiv);
-
-	writel(cfg->dbgdiv, &clock_manager_base->main_pll.dbgdiv);
-
-	writel(cfg->tracediv, &clock_manager_base->main_pll.tracediv);
-
-	/* L4 MP, L4 SP, can0, and can1 */
-	writel(cfg->perdiv, &clock_manager_base->per_pll.div);
-
-	writel(cfg->gpiodiv, &clock_manager_base->per_pll.gpiodiv);
-
-#define LOCKED_MASK \
-	(CLKMGR_INTER_SDRPLLLOCKED_MASK  | \
-	CLKMGR_INTER_PERPLLLOCKED_MASK  | \
-	CLKMGR_INTER_MAINPLLLOCKED_MASK)
-
-	cm_wait_for_lock(LOCKED_MASK);
-
-	/* write the sdram clock counters before toggling outreset all */
-	writel(cfg->ddrdqsclk & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK,
-	       &clock_manager_base->sdr_pll.ddrdqsclk);
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+	uint32_t reg;
+	/* identify the source of QSPI clock */
+	reg = readl(&clock_manager_base->per_pll.src);
+	reg = (reg & CLKMGR_PERPLLGRP_SRC_QSPI_MASK) >>
+	      CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET;
 
-	writel(cfg->ddr2xdqsclk & CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_MASK,
-	       &clock_manager_base->sdr_pll.ddr2xdqsclk);
+	if (reg == CLKMGR_QSPI_CLK_SRC_F2S) {
+		clock = cm_get_f2s_per_ref_clk_hz();
+	} else if (reg == CLKMGR_QSPI_CLK_SRC_MAIN) {
+		clock = cm_get_main_vco_clk_hz();
 
-	writel(cfg->ddrdqclk & CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_MASK,
-	       &clock_manager_base->sdr_pll.ddrdqclk);
+		/* get the qspi clock */
+		reg = readl(&clock_manager_base->main_pll.mainqspiclk);
+		clock /= (reg + 1);
+	} else if (reg == CLKMGR_QSPI_CLK_SRC_PER) {
+		clock = cm_get_per_vco_clk_hz();
 
-	writel(cfg->s2fuser2clk & CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK,
-	       &clock_manager_base->sdr_pll.s2fuser2clk);
+		/* get the qspi clock */
+		reg = readl(&clock_manager_base->per_pll.perqspiclk);
+		clock /= (reg + 1);
+	}
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+	clock = cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MAINCLK_LSB);
+#endif
 
-	/*
-	 * after locking, but before taking out of bypass
-	 * assert/deassert outresetall
-	 */
-	uint32_t mainvco = readl(&clock_manager_base->main_pll.vco);
+	return clock;
+}
 
-	/* assert main outresetall */
-	writel(mainvco | CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
-	       &clock_manager_base->main_pll.vco);
+void cm_wait_for_lock(uint32_t mask)
+{
+	register uint32_t inter_val;
+	uint32_t retry = 0;
+	do {
+#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+		inter_val = readl(&clock_manager_base->stat) & mask;
+#elif defined(CONFIG_TARGET_SOCFPGA_GEN5)
+		inter_val = readl(&clock_manager_base->inter) & mask;
+#endif
+		/* Wait for stable lock */
+		if (inter_val == mask)
+			retry++;
+		else
+			retry = 0;
+		if (retry >= 10)
+			break;
+	} while (1);
+}
 
-	uint32_t periphvco = readl(&clock_manager_base->per_pll.vco);
+unsigned long cm_get_mpu_clk_hz(void)
+{
+	uint32_t reg, clk_hz;
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+	clk_hz = cm_get_main_vco_clk_hz();
 
-	/* assert pheriph outresetall */
-	writel(periphvco | CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
-	       &clock_manager_base->per_pll.vco);
+	/* get the MPU clock */
+	reg = readl(&clock_manager_base->altera.mpuclk);
+	clk_hz /= (reg + 1);
+	reg = readl(&clock_manager_base->main_pll.mpuclk);
+	clk_hz /= (reg + 1);
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+	uint32_t clk_src, mainmpuclk_reg;
 
-	/* assert sdram outresetall */
-	writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN|
-		CLKMGR_SDRPLLGRP_VCO_OUTRESETALL,
-		&clock_manager_base->sdr_pll.vco);
+	mainmpuclk_reg = readl(&clock_manager_base->main_pll.mpuclk);
 
-	/* deassert main outresetall */
-	writel(mainvco & ~CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
-	       &clock_manager_base->main_pll.vco);
+	clk_src = (mainmpuclk_reg >> CLKMGR_MAINPLL_MPUCLK_SRC_LSB) &
+		CLKMGR_MAINPLL_MPUCLK_SRC_MSK;
 
-	/* deassert pheriph outresetall */
-	writel(periphvco & ~CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
-	       &clock_manager_base->per_pll.vco);
+	reg = readl(&clock_manager_base->altera.mpuclk);
+	/* Check MPU clock source: main, periph, osc1, intosc or f2s? */
+	switch (clk_src) {
+	case CLKMGR_MAINPLL_MPUCLK_SRC_MAIN:
+		clk_hz = cm_get_main_vco_clk_hz();
+		clk_hz /= ((reg & CLKMGR_MAINPLL_MPUCLK_CNT_MSK)
+			   + 1);
+		break;
+	case CLKMGR_MAINPLL_MPUCLK_SRC_PERI:
+		clk_hz = cm_get_per_vco_clk_hz();
+		clk_hz /= (((reg >> CLKMGR_MAINPLL_MPUCLK_PERICNT_LSB) &
+			   CLKMGR_MAINPLL_MPUCLK_CNT_MSK) + 1);
+		break;
+	case CLKMGR_MAINPLL_MPUCLK_SRC_OSC1:
+		clk_hz = eosc1_hz;
+		break;
+	case CLKMGR_MAINPLL_MPUCLK_SRC_INTOSC:
+		clk_hz = cb_intosc_hz;
+		break;
+	case CLKMGR_MAINPLL_MPUCLK_SRC_FPGA:
+		clk_hz = f2s_free_hz;
+		break;
+	default:
+		printf("cm_get_mpu_clk_hz invalid clk_src %d\n", clk_src);
+		return 0;
+	}
 
-	/* deassert sdram outresetall */
-	writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
-	       &clock_manager_base->sdr_pll.vco);
+	clk_hz /= ((mainmpuclk_reg & CLKMGR_MAINPLL_MPUCLK_CNT_MSK) + 1);
+#endif
 
-	/*
-	 * now that we've toggled outreset all, all the clocks
-	 * are aligned nicely; so we can change any phase.
-	 */
-	cm_write_with_phase(cfg->ddrdqsclk,
-			    (uint32_t)&clock_manager_base->sdr_pll.ddrdqsclk,
-			    CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_MASK);
+	return clk_hz;
+}
 
-	/* SDRAM DDR2XDQSCLK */
-	cm_write_with_phase(cfg->ddr2xdqsclk,
-			    (uint32_t)&clock_manager_base->sdr_pll.ddr2xdqsclk,
-			    CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_MASK);
+unsigned int cm_get_per_vco_clk_hz(void)
+{
+	uint32_t src_hz = 0;
+	uint32_t clk_src = 0;
+	uint32_t numer = 0;
+	uint32_t denom = 0;
+	uint32_t vco = 0;
 
-	cm_write_with_phase(cfg->ddrdqclk,
-			    (uint32_t)&clock_manager_base->sdr_pll.ddrdqclk,
-			    CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_MASK);
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+	/* identify PER PLL clock source */
+	clk_src = readl(&clock_manager_base->per_pll.vco);
+	clk_src = (clk_src & CLKMGR_PERPLLGRP_VCO_SSRC_MASK) >>
+	      CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET;
+	if (clk_src == CLKMGR_VCO_SSRC_EOSC1)
+		src_hz = cm_get_osc_clk_hz(1);
+	else if (clk_src == CLKMGR_VCO_SSRC_EOSC2)
+		src_hz = cm_get_osc_clk_hz(2);
+	else if (clk_src == CLKMGR_VCO_SSRC_F2S)
+		src_hz = cm_get_f2s_per_ref_clk_hz();
 
-	cm_write_with_phase(cfg->s2fuser2clk,
-			    (uint32_t)&clock_manager_base->sdr_pll.s2fuser2clk,
-			    CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK);
+	/* get the PER VCO clock */
+	vco = readl(&clock_manager_base->per_pll.vco);
+
+	numer = (vco & CLKMGR_PERPLLGRP_VCO_NUMER_MASK) >>
+		CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET;
+
+	denom = (vco & CLKMGR_PERPLLGRP_VCO_DENOM_MASK) >>
+		CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET;
+
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+	clk_src = readl(&clock_manager_base->per_pll.vco0);
+
+	clk_src = (clk_src >> CLKMGR_PERPLL_VCO0_PSRC_LSB) &
+		CLKMGR_PERPLL_VCO0_PSRC_MSK;
+
+	if (clk_src == CLKMGR_PERPLL_VCO0_PSRC_EOSC) {
+		src_hz = eosc1_hz;
+	} else if (clk_src == CLKMGR_PERPLL_VCO0_PSRC_E_INTOSC) {
+		src_hz = cb_intosc_hz;
+	} else if (clk_src == CLKMGR_PERPLL_VCO0_PSRC_F2S) {
+		src_hz = f2s_free_hz;
+	} else if (clk_src == CLKMGR_PERPLL_VCO0_PSRC_MAIN) {
+		src_hz = cm_get_main_vco_clk_hz();
+		src_hz /= (readl
+			(&clock_manager_base->main_pll.cntr15clk) &
+			CLKMGR_MAINPLL_CNTRCLK_MSK) + 1;
+	} else {
+		printf("cm_get_per_vco_clk_hz invalid clk_src %d\n", clk_src);
+		return 0;
+	}
 
-	/* Take all three PLLs out of bypass when safe mode is cleared. */
-	cm_write_bypass(0);
+	vco = readl(&clock_manager_base->per_pll.vco1);
 
-	/* clear safe mode */
-	cm_write_ctrl(readl(&clock_manager_base->ctrl) | CLKMGR_CTRL_SAFEMODE);
+	numer = vco & CLKMGR_PERPLL_VCO1_NUMER_MSK;
 
-	/*
-	 * now that safe mode is clear with clocks gated
-	 * it safe to change the source mux for the flashes the the L4_MAIN
-	 */
-	writel(cfg->persrc, &clock_manager_base->per_pll.src);
-	writel(cfg->l4src, &clock_manager_base->main_pll.l4src);
+	denom = (vco >> CLKMGR_PERPLL_VCO1_DENOM_LSB) &
+			CLKMGR_PERPLL_VCO1_DENOM_MSK;
+#endif
 
-	/* Now ungate non-hw-managed clocks */
-	writel(~0, &clock_manager_base->main_pll.en);
-	writel(~0, &clock_manager_base->per_pll.en);
-	writel(~0, &clock_manager_base->sdr_pll.en);
+	vco = src_hz;
+	vco /= (1 + denom);
+	vco *= (1 + numer);
 
-	/* Clear the loss of lock bits (write 1 to clear) */
-	writel(CLKMGR_INTER_SDRPLLLOST_MASK | CLKMGR_INTER_PERPLLLOST_MASK |
-	       CLKMGR_INTER_MAINPLLLOST_MASK,
-	       &clock_manager_base->inter);
+	return vco;
 }
 
-static unsigned int cm_get_main_vco_clk_hz(void)
+unsigned int cm_get_main_vco_clk_hz(void)
 {
-	uint32_t reg, clock;
+	uint32_t src_hz, numer, denom, vco;
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 	/* get the main VCO clock */
-	reg = readl(&clock_manager_base->main_pll.vco);
-	clock = cm_get_osc_clk_hz(1);
-	clock /= ((reg & CLKMGR_MAINPLLGRP_VCO_DENOM_MASK) >>
-		  CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET) + 1;
-	clock *= ((reg & CLKMGR_MAINPLLGRP_VCO_NUMER_MASK) >>
-		  CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET) + 1;
-
-	return clock;
-}
-
-static unsigned int cm_get_per_vco_clk_hz(void)
-{
-	uint32_t reg, clock = 0;
-
-	/* identify PER PLL clock source */
-	reg = readl(&clock_manager_base->per_pll.vco);
-	reg = (reg & CLKMGR_PERPLLGRP_VCO_SSRC_MASK) >>
-	      CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET;
-	if (reg == CLKMGR_VCO_SSRC_EOSC1)
-		clock = cm_get_osc_clk_hz(1);
-	else if (reg == CLKMGR_VCO_SSRC_EOSC2)
-		clock = cm_get_osc_clk_hz(2);
-	else if (reg == CLKMGR_VCO_SSRC_F2S)
-		clock = cm_get_f2s_per_ref_clk_hz();
-
-	/* get the PER VCO clock */
-	reg = readl(&clock_manager_base->per_pll.vco);
-	clock /= ((reg & CLKMGR_PERPLLGRP_VCO_DENOM_MASK) >>
-		  CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET) + 1;
-	clock *= ((reg & CLKMGR_PERPLLGRP_VCO_NUMER_MASK) >>
-		  CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET) + 1;
-
-	return clock;
-}
+	vco = readl(&clock_manager_base->main_pll.vco);
+
+	numer = ((vco & CLKMGR_MAINPLLGRP_VCO_NUMER_MASK) >>
+		CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET);
+	denom = ((vco & CLKMGR_MAINPLLGRP_VCO_DENOM_MASK) >>
+		 CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET);
+
+	src_hz = cm_get_osc_clk_hz(1);
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+	uint32_t clk_src = readl(&clock_manager_base->main_pll.vco0);
+
+	clk_src = (clk_src >> CLKMGR_MAINPLL_VCO0_PSRC_LSB) &
+		CLKMGR_MAINPLL_VCO0_PSRC_MSK;
+
+	if (clk_src == CLKMGR_MAINPLL_VCO0_PSRC_EOSC) {
+		src_hz = eosc1_hz;
+	} else if (clk_src == CLKMGR_MAINPLL_VCO0_PSRC_E_INTOSC) {
+		src_hz = cb_intosc_hz;
+	} else if (clk_src == CLKMGR_MAINPLL_VCO0_PSRC_F2S) {
+		src_hz = f2s_free_hz;
+	} else {
+		printf("cm_get_main_vco_clk_hz invalid clk_src %d\n", clk_src);
+		return 0;
+	}
 
-unsigned long cm_get_mpu_clk_hz(void)
-{
-	uint32_t reg, clock;
+	vco = readl(&clock_manager_base->main_pll.vco1);
 
-	clock = cm_get_main_vco_clk_hz();
+	numer = vco & CLKMGR_MAINPLL_VCO1_NUMER_MSK;
 
-	/* get the MPU clock */
-	reg = readl(&clock_manager_base->altera.mpuclk);
-	clock /= (reg + 1);
-	reg = readl(&clock_manager_base->main_pll.mpuclk);
-	clock /= (reg + 1);
-	return clock;
-}
+	denom = (vco >> CLKMGR_MAINPLL_VCO1_DENOM_LSB) &
+			CLKMGR_MAINPLL_VCO1_DENOM_MSK;
+#endif
 
-unsigned long cm_get_sdram_clk_hz(void)
-{
-	uint32_t reg, clock = 0;
-
-	/* identify SDRAM PLL clock source */
-	reg = readl(&clock_manager_base->sdr_pll.vco);
-	reg = (reg & CLKMGR_SDRPLLGRP_VCO_SSRC_MASK) >>
-	      CLKMGR_SDRPLLGRP_VCO_SSRC_OFFSET;
-	if (reg == CLKMGR_VCO_SSRC_EOSC1)
-		clock = cm_get_osc_clk_hz(1);
-	else if (reg == CLKMGR_VCO_SSRC_EOSC2)
-		clock = cm_get_osc_clk_hz(2);
-	else if (reg == CLKMGR_VCO_SSRC_F2S)
-		clock = cm_get_f2s_sdr_ref_clk_hz();
-
-	/* get the SDRAM VCO clock */
-	reg = readl(&clock_manager_base->sdr_pll.vco);
-	clock /= ((reg & CLKMGR_SDRPLLGRP_VCO_DENOM_MASK) >>
-		  CLKMGR_SDRPLLGRP_VCO_DENOM_OFFSET) + 1;
-	clock *= ((reg & CLKMGR_SDRPLLGRP_VCO_NUMER_MASK) >>
-		  CLKMGR_SDRPLLGRP_VCO_NUMER_OFFSET) + 1;
-
-	/* get the SDRAM (DDR_DQS) clock */
-	reg = readl(&clock_manager_base->sdr_pll.ddrdqsclk);
-	reg = (reg & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK) >>
-	      CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_OFFSET;
-	clock /= (reg + 1);
+	vco = src_hz;
+	vco /= (1 + denom);
+	vco *= (1 + numer);
 
-	return clock;
+	return vco;
 }
 
 unsigned int cm_get_l4_sp_clk_hz(void)
 {
-	uint32_t reg, clock = 0;
+	uint32_t clock = 0;
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+	uint32_t reg;
 	/* identify the source of L4 SP clock */
 	reg = readl(&clock_manager_base->main_pll.l4src);
 	reg = (reg & CLKMGR_MAINPLLGRP_L4SRC_L4SP) >>
@@ -443,106 +314,117 @@ unsigned int cm_get_l4_sp_clk_hz(void)
 	reg = (reg & CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_MASK) >>
 	      CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET;
 	clock = clock / (1 << reg);
-
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+	clock = cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4SPCLK_LSB);
+#endif
 	return clock;
 }
 
-unsigned int cm_get_mmc_controller_clk_hz(void)
+/* function to poll in the fsm busy bit */
+void cm_wait_for_fsm(void)
 {
-	uint32_t reg, clock = 0;
-
-	/* identify the source of MMC clock */
-	reg = readl(&clock_manager_base->per_pll.src);
-	reg = (reg & CLKMGR_PERPLLGRP_SRC_SDMMC_MASK) >>
-	      CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET;
-
-	if (reg == CLKMGR_SDMMC_CLK_SRC_F2S) {
-		clock = cm_get_f2s_per_ref_clk_hz();
-	} else if (reg == CLKMGR_SDMMC_CLK_SRC_MAIN) {
-		clock = cm_get_main_vco_clk_hz();
-
-		/* get the SDMMC clock */
-		reg = readl(&clock_manager_base->main_pll.mainnandsdmmcclk);
-		clock /= (reg + 1);
-	} else if (reg == CLKMGR_SDMMC_CLK_SRC_PER) {
-		clock = cm_get_per_vco_clk_hz();
-
-		/* get the SDMMC clock */
-		reg = readl(&clock_manager_base->per_pll.pernandsdmmcclk);
-		clock /= (reg + 1);
-	}
-
-	/* further divide by 4 as we have fixed divider at wrapper */
-	clock /= 4;
-	return clock;
+	while (readl(&clock_manager_base->stat) &
+		CLKMGR_CLKMGR_STAT_BUSY_SET_MSK);
 }
 
-unsigned int cm_get_qspi_controller_clk_hz(void)
+unsigned int cm_get_mmc_controller_clk_hz(void)
 {
-	uint32_t reg, clock = 0;
-
-	/* identify the source of QSPI clock */
-	reg = readl(&clock_manager_base->per_pll.src);
-	reg = (reg & CLKMGR_PERPLLGRP_SRC_QSPI_MASK) >>
-	      CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET;
+	uint32_t clk_hz = 0;
+	uint32_t clk_input = 0;
+
+#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+	clk_input = readl(&clock_manager_base->per_pll.cntr6clk);
+	clk_input = (clk_input >> CLKMGR_PERPLL_CNTR6CLK_SRC_LSB) &
+		CLKMGR_PERPLLGRP_SRC_MSK;
+#elif defined(CONFIG_TARGET_SOCFPGA_GEN5)
+	clk_input = readl(&clock_manager_base->per_pll.src);
+	clk_input = (clk_input & CLKMGR_PERPLLGRP_SRC_SDMMC_MASK) >>
+	      CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET;
+#endif
+
+	switch (clk_input) {
+#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+	case CLKMGR_PERPLLGRP_SRC_MAIN:
+		clk_hz = cm_get_main_vco_clk_hz();
+		clk_hz /= 1 +
+			(readl
+			(&clock_manager_base->main_pll.cntr6clk) &
+			CLKMGR_MAINPLL_CNTRCLK_MSK);
+		break;
+
+	case CLKMGR_PERPLLGRP_SRC_PERI:
+		clk_hz = cm_get_per_vco_clk_hz();
+		clk_hz /= 1 + (readl
+			(&clock_manager_base->per_pll.cntr6clk) &
+			CLKMGR_PERPLL_CNTRCLK_MSK);
+		break;
+
+	case CLKMGR_PERPLLGRP_SRC_OSC1:
+		clk_hz = eosc1_hz;
+		break;
+
+	case CLKMGR_PERPLLGRP_SRC_INTOSC:
+		clk_hz = cb_intosc_hz;
+		break;
+
+	case CLKMGR_PERPLLGRP_SRC_FPGA:
+		clk_hz = f2s_free_hz;
+		break;
+#elif defined(CONFIG_TARGET_SOCFPGA_GEN5)
+	case CLKMGR_SDMMC_CLK_SRC_F2S:
+		clk_hz = cm_get_f2s_per_ref_clk_hz();
+		break;
+
+	case CLKMGR_SDMMC_CLK_SRC_MAIN:
+		clk_hz = cm_get_main_vco_clk_hz();
 
-	if (reg == CLKMGR_QSPI_CLK_SRC_F2S) {
-		clock = cm_get_f2s_per_ref_clk_hz();
-	} else if (reg == CLKMGR_QSPI_CLK_SRC_MAIN) {
-		clock = cm_get_main_vco_clk_hz();
+		/* get the SDMMC clock */
+		clk_input =
+			readl(&clock_manager_base->main_pll.mainnandsdmmcclk);
+		clk_hz /= (clk_input + 1);
+		break;
 
-		/* get the qspi clock */
-		reg = readl(&clock_manager_base->main_pll.mainqspiclk);
-		clock /= (reg + 1);
-	} else if (reg == CLKMGR_QSPI_CLK_SRC_PER) {
-		clock = cm_get_per_vco_clk_hz();
+	case CLKMGR_SDMMC_CLK_SRC_PER:
+		clk_hz = cm_get_per_vco_clk_hz();
 
-		/* get the qspi clock */
-		reg = readl(&clock_manager_base->per_pll.perqspiclk);
-		clock /= (reg + 1);
+		/* get the SDMMC clock */
+		clk_input =
+			readl(&clock_manager_base->per_pll.pernandsdmmcclk);
+		clk_hz /= (clk_input + 1);
+		break;
+#endif
 	}
-
-	return clock;
-}
-
-unsigned int cm_get_spi_controller_clk_hz(void)
-{
-	uint32_t reg, clock = 0;
-
-	clock = cm_get_per_vco_clk_hz();
-
-	/* get the clock prior L4 SP divider (periph_base_clk) */
-	reg = readl(&clock_manager_base->per_pll.perbaseclk);
-	clock /= (reg + 1);
-
-	return clock;
+	return clk_hz/4;
 }
 
 static void cm_print_clock_quick_summary(void)
 {
 	printf("MPU       %10ld kHz\n", cm_get_mpu_clk_hz() / 1000);
+	printf("MMC         %8d kHz\n", cm_get_mmc_controller_clk_hz() / 1000);
+	printf("QSPI        %8d kHz\n",
+		cm_get_qspi_controller_clk_hz() / 1000);
+	printf("SPI         %8d kHz\n", cm_get_spi_controller_clk_hz() / 1000);
+#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+	printf("EOSC1       %8d kHz\n", eosc1_hz / 1000);
+	printf("cb_intosc   %8d kHz\n", cb_intosc_hz / 1000);
+	printf("f2s_free    %8d kHz\n", f2s_free_hz / 1000);
+	printf("Main VCO    %8d kHz\n", cm_get_main_vco_clk_hz()/1000);
+	printf("NOC         %8d kHz\n", cm_get_noc_clk_hz()/1000);
+	printf("L4 Main	    %8d kHz\n",
+	       cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MAINCLK_LSB)/1000);
+	printf("L4 MP       %8d kHz\n",
+	       cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MPCLK_LSB)/1000);
+	printf("L4 SP       %8d kHz\n",
+	       cm_get_l4_sp_clk_hz()/1000);
+	printf("L4 sys free %8d kHz\n", cm_l4_sys_free_clk_hz/1000);
+#elif defined(CONFIG_TARGET_SOCFPGA_GEN5)
 	printf("DDR       %10ld kHz\n", cm_get_sdram_clk_hz() / 1000);
 	printf("EOSC1       %8d kHz\n", cm_get_osc_clk_hz(1) / 1000);
 	printf("EOSC2       %8d kHz\n", cm_get_osc_clk_hz(2) / 1000);
 	printf("F2S_SDR_REF %8d kHz\n", cm_get_f2s_sdr_ref_clk_hz() / 1000);
 	printf("F2S_PER_REF %8d kHz\n", cm_get_f2s_per_ref_clk_hz() / 1000);
-	printf("MMC         %8d kHz\n", cm_get_mmc_controller_clk_hz() / 1000);
-	printf("QSPI        %8d kHz\n", cm_get_qspi_controller_clk_hz() / 1000);
 	printf("UART        %8d kHz\n", cm_get_l4_sp_clk_hz() / 1000);
-	printf("SPI         %8d kHz\n", cm_get_spi_controller_clk_hz() / 1000);
-}
-
-int set_cpu_clk_info(void)
-{
-	/* Calculate the clock frequencies required for drivers */
-	cm_get_l4_sp_clk_hz();
-	cm_get_mmc_controller_clk_hz();
-
-	gd->bd->bi_arm_freq = cm_get_mpu_clk_hz() / 1000000;
-	gd->bd->bi_dsp_freq = 0;
-	gd->bd->bi_ddr_freq = cm_get_sdram_clk_hz() / 1000000;
-
-	return 0;
+#endif
 }
 
 int do_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
diff --git a/arch/arm/mach-socfpga/clock_manager_arria10.c b/arch/arm/mach-socfpga/clock_manager_arria10.c
new file mode 100644
index 0000000..93165b4
--- /dev/null
+++ b/arch/arm/mach-socfpga/clock_manager_arria10.c
@@ -0,0 +1,954 @@
+/*
+ * Copyright (C) 2016, Intel Corporation
+ *
+ * SPDX-License-Identifier:    GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock_manager.h>
+#include <fdtdec.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int cm_basic_init(const void* blob);
+uint32_t eosc1_hz;
+uint32_t cb_intosc_hz;
+uint32_t f2s_free_hz;
+unsigned int cm_l4_main_clk_hz;
+unsigned int cm_l4_sp_clk_hz;
+unsigned int cm_l4_mp_clk_hz;
+unsigned int cm_l4_sys_free_clk_hz;
+
+struct strtopu32 {
+	const char *str;
+	uint32_t *p;
+};
+
+struct mainpll_cfg {
+	uint32_t vco0_psrc;
+	uint32_t vco1_denom;
+	uint32_t vco1_numer;
+	uint32_t mpuclk;
+	uint32_t mpuclk_cnt;
+	uint32_t mpuclk_src;
+	uint32_t nocclk;
+	uint32_t nocclk_cnt;
+	uint32_t nocclk_src;
+	uint32_t cntr2clk_cnt;
+	uint32_t cntr3clk_cnt;
+	uint32_t cntr4clk_cnt;
+	uint32_t cntr5clk_cnt;
+	uint32_t cntr6clk_cnt;
+	uint32_t cntr7clk_cnt;
+	uint32_t cntr7clk_src;
+	uint32_t cntr8clk_cnt;
+	uint32_t cntr9clk_cnt;
+	uint32_t cntr9clk_src;
+	uint32_t cntr15clk_cnt;
+	uint32_t nocdiv_l4mainclk;
+	uint32_t nocdiv_l4mpclk;
+	uint32_t nocdiv_l4spclk;
+	uint32_t nocdiv_csatclk;
+	uint32_t nocdiv_cstraceclk;
+	uint32_t nocdiv_cspdbclk;
+};
+
+struct perpll_cfg {
+	uint32_t vco0_psrc;
+	uint32_t vco1_denom;
+	uint32_t vco1_numer;
+	uint32_t cntr2clk_cnt;
+	uint32_t cntr2clk_src;
+	uint32_t cntr3clk_cnt;
+	uint32_t cntr3clk_src;
+	uint32_t cntr4clk_cnt;
+	uint32_t cntr4clk_src;
+	uint32_t cntr5clk_cnt;
+	uint32_t cntr5clk_src;
+	uint32_t cntr6clk_cnt;
+	uint32_t cntr6clk_src;
+	uint32_t cntr7clk_cnt;
+	uint32_t cntr8clk_cnt;
+	uint32_t cntr8clk_src;
+	uint32_t cntr9clk_cnt;
+	uint32_t emacctl_emac0sel;
+	uint32_t emacctl_emac1sel;
+	uint32_t emacctl_emac2sel;
+	uint32_t gpiodiv_gpiodbclk;
+};
+
+struct alteragrp_cfg {
+	uint32_t nocclk;
+	uint32_t mpuclk;
+};
+
+unsigned int cm_get_noc_clk_hz(void);
+unsigned int cm_get_l4_noc_hz(unsigned int nocdivshift);
+static int of_to_struct(const void *blob, int node, int cfg__len, void *cfg);
+static int of_get_input_clks(const void *blob, int node, void *cfg);
+static int of_get_clk_cfg(const void *blob, struct mainpll_cfg *main_cfg,
+	 struct perpll_cfg *per_cfg, struct alteragrp_cfg *altrgrp_cfg);
+static unsigned int cm_calc_handoff_main_vco_clk_hz(
+	 struct mainpll_cfg *main_cfg);
+static unsigned int cm_calc_handoff_periph_vco_clk_hz(
+	 struct mainpll_cfg *main_cfg, struct perpll_cfg *per_cfg);
+static unsigned int cm_calc_handoff_mpu_clk_hz(struct mainpll_cfg *main_cfg,
+	 struct perpll_cfg *per_cfg);
+static unsigned int cm_calc_handoff_noc_clk_hz(struct mainpll_cfg *main_cfg,
+	 struct perpll_cfg *per_cfg);
+static int cm_is_pll_ramp_required(int main0periph1,
+	 struct mainpll_cfg *main_cfg, struct perpll_cfg *per_cfg);
+static unsigned int cm_calc_safe_pll_numer(int main0periph1,
+	 struct mainpll_cfg *main_cfg, struct perpll_cfg *per_cfg,
+	 unsigned int safe_hz);
+static void cm_pll_ramp_main(struct mainpll_cfg *main_cfg,
+	 struct perpll_cfg *per_cfg, unsigned int pll_ramp_main_hz);
+static void cm_pll_ramp_periph(struct mainpll_cfg *main_cfg,
+	 struct perpll_cfg *per_cfg, unsigned int pll_ramp_periph_hz);
+static int cm_full_cfg(struct mainpll_cfg *main_cfg,
+	 struct perpll_cfg *per_cfg);
+
+static const struct socfpga_clock_manager *clock_manager_base =
+	(struct socfpga_clock_manager *)SOCFPGA_CLKMGR_ADDRESS;
+
+void cm_use_intosc(void)
+{
+	setbits_le32(&clock_manager_base->ctrl,
+		     CLKMGR_CLKMGR_CTL_BOOTCLK_INTOSC_SET_MSK);
+}
+
+unsigned int cm_get_noc_clk_hz(void)
+{
+	unsigned int clk_src, dividor, nocclk, src_hz;
+
+	nocclk = readl(&clock_manager_base->main_pll.nocclk);
+	clk_src = (nocclk >> CLKMGR_MAINPLL_NOCCLK_SRC_LSB) &
+		CLKMGR_MAINPLL_NOCCLK_SRC_MSK;
+
+	dividor = 1 + (nocclk & CLKMGR_MAINPLL_NOCDIV_MSK);
+
+	if (clk_src == CLKMGR_PERPLLGRP_SRC_MAIN) {
+		src_hz = cm_get_main_vco_clk_hz();
+		src_hz /= 1 +
+		(readl(SOCFPGA_CLKMGR_ADDRESS+CLKMGR_MAINPLL_NOC_CLK_OFFSET)&
+		CLKMGR_MAINPLL_NOCCLK_CNT_MSK);
+	} else if (clk_src == CLKMGR_PERPLLGRP_SRC_PERI) {
+		src_hz = cm_get_per_vco_clk_hz();
+		src_hz /= 1 +
+		((readl(SOCFPGA_CLKMGR_ADDRESS+CLKMGR_MAINPLL_NOC_CLK_OFFSET)>>
+			CLKMGR_MAINPLL_NOCCLK_PERICNT_LSB)&
+			CLKMGR_MAINPLL_NOCCLK_CNT_MSK);
+	} else if (clk_src == CLKMGR_PERPLLGRP_SRC_OSC1) {
+		src_hz = eosc1_hz;
+	} else if (clk_src == CLKMGR_PERPLLGRP_SRC_INTOSC) {
+		src_hz = cb_intosc_hz;
+	} else if (clk_src == CLKMGR_PERPLLGRP_SRC_FPGA) {
+		src_hz = f2s_free_hz;
+	} else {
+		src_hz = 0;
+	}
+	return src_hz/dividor;
+}
+
+unsigned int cm_get_l4_noc_hz(unsigned int nocdivshift)
+{
+	unsigned int dividor2 = 1 <<
+		((readl(&clock_manager_base->main_pll.nocdiv) >>
+			nocdivshift) & CLKMGR_MAINPLL_NOCDIV_MSK);
+
+	return cm_get_noc_clk_hz()/dividor2;
+}
+
+int of_to_struct(const void *blob, int node, int cfg_len, void *cfg)
+{
+	if (fdtdec_get_int_array(blob, node, "altr,of_reg_value",
+		(u32*)cfg, cfg_len)) {
+		/* could not find required property */
+		return 100;
+	}
+
+	return 0;
+}
+
+static int of_get_input_clks(const void *blob, int node, void *cfg)
+{
+	if (fdtdec_get_int_array(blob, node, "clock-frequency",
+		(u32*)cfg, 1)) {
+		/* could not find required property */
+		return 100;
+	}
+
+	return 0;
+}
+
+int of_get_clk_cfg(const void *blob, struct mainpll_cfg *main_cfg,
+			  struct perpll_cfg *per_cfg, struct alteragrp_cfg *altrgrp_cfg)
+{
+	int node, child, len;
+	const char *node_name;
+
+	node = fdtdec_next_compatible(blob, 0, COMPAT_ALTERA_SOCFPGA_CLK);
+
+	if (node < 0)
+		return 1;
+
+	child = fdt_first_subnode(blob, node);
+
+	if (child < 0)
+		return 2;
+
+	child = fdt_first_subnode(blob, child);
+
+	if (child < 0)
+		return 3;
+
+	node_name = fdt_get_name(blob, child, &len);
+
+	while (node_name) {
+		if (!strcmp(node_name, "osc1")) {
+			if (of_get_input_clks(blob, child, &eosc1_hz))
+				return 101;
+		} else if (!strcmp(node_name, "cb_intosc_ls_clk")) {
+			if (of_get_input_clks(blob, child, &cb_intosc_hz))
+				return 102;
+		} else if (!strcmp(node_name, "f2s_free_clk")) {
+			if (of_get_input_clks(blob, child, &f2s_free_hz))
+				return 103;
+		} else if (!strcmp(node_name, "main_pll")) {
+			if (of_to_struct(blob, child, sizeof(*main_cfg)/sizeof(uint32_t),
+				main_cfg))
+				return 104;
+		} else if (!strcmp(node_name, "periph_pll")) {
+			if (of_to_struct(blob, child, sizeof(*per_cfg)/sizeof(uint32_t),
+				per_cfg))
+				return 105;
+		} else if (!strcmp(node_name, "altera")) {
+			if (of_to_struct(blob, child,
+				sizeof(*altrgrp_cfg)/sizeof(uint32_t), altrgrp_cfg))
+				return 106;
+
+			main_cfg->mpuclk = altrgrp_cfg->mpuclk;
+			main_cfg->nocclk = altrgrp_cfg->nocclk;
+		}
+		child = fdt_next_subnode(blob, child);
+
+		if (child < 0)
+			break;
+
+		node_name = fdt_get_name(blob, child, &len);
+	}
+
+	return 0;
+}
+
+/* calculate the intended main VCO frequency based on handoff */
+static unsigned int cm_calc_handoff_main_vco_clk_hz
+	(struct mainpll_cfg *main_cfg)
+{
+	unsigned int clk_hz;
+
+	/* Check main VCO clock source: eosc, intosc or f2s? */
+	switch (main_cfg->vco0_psrc) {
+	case CLKMGR_MAINPLL_VCO0_PSRC_EOSC:
+		clk_hz = eosc1_hz;
+		break;
+	case CLKMGR_MAINPLL_VCO0_PSRC_E_INTOSC:
+		clk_hz = cb_intosc_hz;
+		break;
+	case CLKMGR_MAINPLL_VCO0_PSRC_F2S:
+		clk_hz = f2s_free_hz;
+		break;
+	default:
+		return 0;
+	}
+
+	/* calculate the VCO frequency */
+	clk_hz /= (1 + main_cfg->vco1_denom);
+	clk_hz *= (1 + main_cfg->vco1_numer);
+
+	return clk_hz;
+}
+
+/* calculate the intended periph VCO frequency based on handoff */
+static unsigned int cm_calc_handoff_periph_vco_clk_hz
+	(struct mainpll_cfg *main_cfg, struct perpll_cfg *per_cfg)
+{
+	unsigned int clk_hz;
+
+	/* Check periph VCO clock source: eosc, intosc, f2s or mainpll? */
+	switch (per_cfg->vco0_psrc) {
+	case CLKMGR_PERPLL_VCO0_PSRC_EOSC:
+		clk_hz = eosc1_hz;
+		break;
+	case CLKMGR_PERPLL_VCO0_PSRC_E_INTOSC:
+		clk_hz = cb_intosc_hz;
+		break;
+	case CLKMGR_PERPLL_VCO0_PSRC_F2S:
+		clk_hz = f2s_free_hz;
+		break;
+	case CLKMGR_PERPLL_VCO0_PSRC_MAIN:
+		clk_hz = cm_calc_handoff_main_vco_clk_hz(main_cfg);
+		clk_hz /= main_cfg->cntr15clk_cnt;
+		break;
+	default:
+		return 0;
+	}
+
+	/* calculate the VCO frequency */
+	clk_hz /= (1 + per_cfg->vco1_denom);
+	clk_hz *= (1 + per_cfg->vco1_numer);
+
+	return clk_hz;
+}
+
+/* calculate the intended MPU clock frequency based on handoff */
+static unsigned int cm_calc_handoff_mpu_clk_hz(struct mainpll_cfg *main_cfg,
+			       struct perpll_cfg *per_cfg)
+{
+	unsigned int clk_hz;
+
+	/* Check MPU clock source: main, periph, osc1, intosc or f2s? */
+	switch (main_cfg->mpuclk_src) {
+	case CLKMGR_MAINPLL_MPUCLK_SRC_MAIN:
+		clk_hz = cm_calc_handoff_main_vco_clk_hz(main_cfg);
+		clk_hz /= ((main_cfg->mpuclk & CLKMGR_MAINPLL_MPUCLK_CNT_MSK)
+			   + 1);
+		break;
+	case CLKMGR_MAINPLL_MPUCLK_SRC_PERI:
+		clk_hz = cm_calc_handoff_periph_vco_clk_hz(main_cfg, per_cfg);
+		clk_hz /= (((main_cfg->mpuclk >>
+			   CLKMGR_MAINPLL_MPUCLK_PERICNT_LSB) &
+			   CLKMGR_MAINPLL_MPUCLK_CNT_MSK) + 1);
+		break;
+	case CLKMGR_MAINPLL_MPUCLK_SRC_OSC1:
+		clk_hz = eosc1_hz;
+		break;
+	case CLKMGR_MAINPLL_MPUCLK_SRC_INTOSC:
+		clk_hz = cb_intosc_hz;
+		break;
+	case CLKMGR_MAINPLL_MPUCLK_SRC_FPGA:
+		clk_hz = f2s_free_hz;
+		break;
+	default:
+		return 0;
+	}
+
+	clk_hz /= (main_cfg->mpuclk_cnt + 1);
+	return clk_hz;
+}
+
+/* calculate the intended NOC clock frequency based on handoff */
+static unsigned int cm_calc_handoff_noc_clk_hz(struct mainpll_cfg *main_cfg,
+			       struct perpll_cfg *per_cfg)
+{
+	unsigned int clk_hz;
+
+	/* Check MPU clock source: main, periph, osc1, intosc or f2s? */
+	switch (main_cfg->nocclk_src) {
+	case CLKMGR_MAINPLL_NOCCLK_SRC_MAIN:
+		clk_hz = cm_calc_handoff_main_vco_clk_hz(main_cfg);
+		clk_hz /= ((main_cfg->nocclk & CLKMGR_MAINPLL_NOCCLK_CNT_MSK)
+			   + 1);
+		break;
+	case CLKMGR_MAINPLL_NOCCLK_SRC_PERI:
+		clk_hz = cm_calc_handoff_periph_vco_clk_hz(main_cfg, per_cfg);
+		clk_hz /= (((main_cfg->nocclk >>
+			   CLKMGR_MAINPLL_NOCCLK_PERICNT_LSB) &
+			   CLKMGR_MAINPLL_NOCCLK_CNT_MSK) + 1);
+		break;
+	case CLKMGR_MAINPLL_NOCCLK_SRC_OSC1:
+		clk_hz = eosc1_hz;
+		break;
+	case CLKMGR_MAINPLL_NOCCLK_SRC_INTOSC:
+		clk_hz = cb_intosc_hz;
+		break;
+	case CLKMGR_MAINPLL_NOCCLK_SRC_FPGA:
+		clk_hz = f2s_free_hz;
+		break;
+	default:
+		return 0;
+	}
+
+	clk_hz /= (main_cfg->nocclk_cnt + 1);
+	return clk_hz;
+}
+
+/* return 1 if PLL ramp is required */
+static int cm_is_pll_ramp_required(int main0periph1,
+				   struct mainpll_cfg *main_cfg,
+				   struct perpll_cfg *per_cfg)
+{
+
+	/* Check for main PLL */
+	if (main0periph1 == 0) {
+		/*
+		 * PLL ramp is not required if both MPU clock and NOC clock are
+		 * not sourced from main PLL
+		 */
+		if (main_cfg->mpuclk_src != CLKMGR_MAINPLL_MPUCLK_SRC_MAIN &&
+		    main_cfg->nocclk_src != CLKMGR_MAINPLL_NOCCLK_SRC_MAIN)
+			return 0;
+
+		/*
+		 * PLL ramp is required if MPU clock is sourced from main PLL
+		 * and MPU clock is over 900MHz (as advised by HW team)
+		 */
+		if (main_cfg->mpuclk_src == CLKMGR_MAINPLL_MPUCLK_SRC_MAIN &&
+		    (cm_calc_handoff_mpu_clk_hz(main_cfg, per_cfg) >
+		     CLKMGR_PLL_RAMP_MPUCLK_THRESHOLD_HZ))
+			return 1;
+
+		/*
+		 * PLL ramp is required if NOC clock is sourced from main PLL
+		 * and NOC clock is over 300MHz (as advised by HW team)
+		 */
+		if (main_cfg->nocclk_src == CLKMGR_MAINPLL_NOCCLK_SRC_MAIN &&
+		    (cm_calc_handoff_noc_clk_hz(main_cfg, per_cfg) >
+		     CLKMGR_PLL_RAMP_NOCCLK_THRESHOLD_HZ))
+			return 2;
+
+	} else if (main0periph1 == 1) {
+		/*
+		 * PLL ramp is not required if both MPU clock and NOC clock are
+		 * not sourced from periph PLL
+		 */
+		if (main_cfg->mpuclk_src != CLKMGR_MAINPLL_MPUCLK_SRC_PERI &&
+		    main_cfg->nocclk_src != CLKMGR_MAINPLL_NOCCLK_SRC_PERI)
+			return 0;
+
+		/*
+		 * PLL ramp is required if MPU clock are source from periph PLL
+		 * and MPU clock is over 900MHz (as advised by HW team)
+		 */
+		if (main_cfg->mpuclk_src == CLKMGR_MAINPLL_MPUCLK_SRC_PERI &&
+		    (cm_calc_handoff_mpu_clk_hz(main_cfg, per_cfg) >
+		     CLKMGR_PLL_RAMP_MPUCLK_THRESHOLD_HZ))
+			return 1;
+
+		/*
+		 * PLL ramp is required if NOC clock are source from periph PLL
+		 * and NOC clock is over 300MHz (as advised by HW team)
+		 */
+		if (main_cfg->nocclk_src == CLKMGR_MAINPLL_NOCCLK_SRC_PERI &&
+		    (cm_calc_handoff_noc_clk_hz(main_cfg, per_cfg) >
+		     CLKMGR_PLL_RAMP_NOCCLK_THRESHOLD_HZ))
+			return 2;
+	}
+	return 0;
+}
+
+/*
+ * Calculate the new PLL numerator which is based on existing DTS hand off and
+ * intended safe frequency (safe_hz). Note that PLL ramp is only modifying the
+ * numerator while maintaining denominator as denominator will influence the
+ * jitter condition. Please refer A10 HPS TRM for the jitter guide. Note final
+ * value for numerator is minus with 1 to cater our register value
+ * representation.
+ */
+static unsigned int cm_calc_safe_pll_numer(int main0periph1,
+				  struct mainpll_cfg *main_cfg,
+				  struct perpll_cfg *per_cfg,
+				  unsigned int safe_hz)
+{
+	unsigned int clk_hz = 0;
+
+	/* Check for main PLL */
+	if (main0periph1 == 0) {
+		/* Check main VCO clock source: eosc, intosc or f2s? */
+		switch (main_cfg->vco0_psrc) {
+		case CLKMGR_MAINPLL_VCO0_PSRC_EOSC:
+			clk_hz = eosc1_hz;
+			break;
+		case CLKMGR_MAINPLL_VCO0_PSRC_E_INTOSC:
+			clk_hz = cb_intosc_hz;
+			break;
+		case CLKMGR_MAINPLL_VCO0_PSRC_F2S:
+			clk_hz = f2s_free_hz;
+			break;
+		default:
+			return 0;
+		}
+		/* Applicable if MPU clock is from main PLL */
+		if (main_cfg->mpuclk_src == CLKMGR_MAINPLL_MPUCLK_SRC_MAIN) {
+			/* calculate the safe numer value */
+			clk_hz = (safe_hz / clk_hz) *
+				(main_cfg->mpuclk_cnt + 1) *
+				((main_cfg->mpuclk &
+				  CLKMGR_MAINPLL_MPUCLK_CNT_MSK) + 1) *
+				(1 + main_cfg->vco1_denom) - 1;
+		}
+		/* Reach here if MPU clk not from main PLL but NOC clk is */
+		else if (main_cfg->nocclk_src ==
+			 CLKMGR_MAINPLL_NOCCLK_SRC_MAIN) {
+			/* calculate the safe numer value */
+			clk_hz = (safe_hz / clk_hz) *
+				(main_cfg->nocclk_cnt + 1) *
+				((main_cfg->nocclk &
+				  CLKMGR_MAINPLL_NOCCLK_CNT_MSK) + 1) *
+				(1 + main_cfg->vco1_denom) - 1;
+		} else
+			clk_hz = 0;
+
+	} else if (main0periph1 == 1) {
+		/* Check periph VCO clock source: eosc, intosc, f2s, mainpll */
+		switch (per_cfg->vco0_psrc) {
+		case CLKMGR_PERPLL_VCO0_PSRC_EOSC:
+			clk_hz = eosc1_hz;
+			break;
+		case CLKMGR_PERPLL_VCO0_PSRC_E_INTOSC:
+			clk_hz = cb_intosc_hz;
+			break;
+		case CLKMGR_PERPLL_VCO0_PSRC_F2S:
+			clk_hz = f2s_free_hz;
+			break;
+		case CLKMGR_PERPLL_VCO0_PSRC_MAIN:
+			clk_hz = cm_calc_handoff_main_vco_clk_hz(
+				 main_cfg);
+			clk_hz /= main_cfg->cntr15clk_cnt;
+			break;
+		default:
+			return 0;
+		}
+		/* Applicable if MPU clock is from periph PLL */
+		if (main_cfg->mpuclk_src == CLKMGR_MAINPLL_MPUCLK_SRC_PERI) {
+			/* calculate the safe numer value */
+			clk_hz = (safe_hz / clk_hz) *
+				(main_cfg->mpuclk_cnt + 1) *
+				(((main_cfg->mpuclk >>
+				  CLKMGR_MAINPLL_MPUCLK_PERICNT_LSB) &
+				  CLKMGR_MAINPLL_MPUCLK_CNT_MSK) + 1) *
+				(1 + per_cfg->vco1_denom) - 1;
+		}
+		/* Reach here if MPU clk not from periph PLL but NOC clk is */
+		else if (main_cfg->nocclk_src ==
+			 CLKMGR_MAINPLL_NOCCLK_SRC_PERI) {
+			/* calculate the safe numer value */
+			clk_hz = (safe_hz / clk_hz) *
+				(main_cfg->nocclk_cnt + 1) *
+				(((main_cfg->nocclk >>
+				  CLKMGR_MAINPLL_NOCCLK_PERICNT_LSB) &
+				  CLKMGR_MAINPLL_NOCCLK_CNT_MSK) + 1) *
+				(1 + per_cfg->vco1_denom) - 1;
+		} else
+			clk_hz = 0;
+	}
+	return clk_hz;
+}
+
+/* ramping the main PLL to final value */
+static void cm_pll_ramp_main(struct mainpll_cfg *main_cfg,
+			    struct perpll_cfg *per_cfg,
+			    unsigned int pll_ramp_main_hz)
+{
+	unsigned int clk_hz = 0, clk_incr_hz = 0, clk_final_hz = 0;
+
+	/* find out the increment value */
+	if (main_cfg->mpuclk_src == CLKMGR_MAINPLL_MPUCLK_SRC_MAIN) {
+		clk_incr_hz = CLKMGR_PLL_RAMP_MPUCLK_INCREMENT_HZ;
+		clk_final_hz = cm_calc_handoff_mpu_clk_hz(main_cfg, per_cfg);
+	} else if (main_cfg->nocclk_src == CLKMGR_MAINPLL_NOCCLK_SRC_MAIN) {
+		clk_incr_hz = CLKMGR_PLL_RAMP_NOCCLK_INCREMENT_HZ;
+		clk_final_hz = cm_calc_handoff_noc_clk_hz(main_cfg, per_cfg);
+	}
+	/* execute the ramping here */
+	for (clk_hz = pll_ramp_main_hz + clk_incr_hz;
+	     clk_hz < clk_final_hz; clk_hz += clk_incr_hz) {
+		writel((main_cfg->vco1_denom <<
+			CLKMGR_MAINPLL_VCO1_DENOM_LSB) |
+			cm_calc_safe_pll_numer(0, main_cfg, per_cfg, clk_hz),
+			&clock_manager_base->main_pll.vco1);
+		udelay(1000);
+		cm_wait_for_lock(LOCKED_MASK);
+	}
+	writel((main_cfg->vco1_denom << CLKMGR_MAINPLL_VCO1_DENOM_LSB) |
+		main_cfg->vco1_numer,
+			&clock_manager_base->main_pll.vco1);
+	udelay(1000);
+	cm_wait_for_lock(LOCKED_MASK);
+}
+
+/* ramping the periph PLL to final value */
+static void cm_pll_ramp_periph(struct mainpll_cfg *main_cfg,
+			      struct perpll_cfg *per_cfg,
+			      unsigned int pll_ramp_periph_hz)
+{
+	unsigned int clk_hz = 0, clk_incr_hz = 0, clk_final_hz = 0;
+
+	/* find out the increment value */
+	if (main_cfg->mpuclk_src == CLKMGR_MAINPLL_MPUCLK_SRC_PERI) {
+		clk_incr_hz = CLKMGR_PLL_RAMP_MPUCLK_INCREMENT_HZ;
+		clk_final_hz = cm_calc_handoff_mpu_clk_hz(main_cfg, per_cfg);
+	} else if (main_cfg->nocclk_src == CLKMGR_MAINPLL_NOCCLK_SRC_PERI) {
+		clk_incr_hz = CLKMGR_PLL_RAMP_NOCCLK_INCREMENT_HZ;
+		clk_final_hz = cm_calc_handoff_noc_clk_hz(main_cfg, per_cfg);
+	}
+	/* execute the ramping here */
+	for (clk_hz = pll_ramp_periph_hz + clk_incr_hz;
+	     clk_hz < clk_final_hz; clk_hz += clk_incr_hz) {
+		writel((per_cfg->vco1_denom << CLKMGR_PERPLL_VCO1_DENOM_LSB) |
+			cm_calc_safe_pll_numer(1, main_cfg, per_cfg, clk_hz),
+			&clock_manager_base->per_pll.vco1);
+		udelay(1000);
+		cm_wait_for_lock(LOCKED_MASK);
+	}
+	writel((per_cfg->vco1_denom << CLKMGR_PERPLL_VCO1_DENOM_LSB) |
+		per_cfg->vco1_numer,
+		&clock_manager_base->per_pll.vco1);
+	udelay(1000);
+	cm_wait_for_lock(LOCKED_MASK);
+}
+
+/*
+ * Setup clocks while making no assumptions of the
+ * previous state of the clocks.
+ *
+ * Start by being paranoid and gate all sw managed clocks
+ *
+ * Put all plls in bypass
+ *
+ * Put all plls VCO registers back to reset value (bgpwr dwn).
+ *
+ * Put peripheral and main pll src to reset value to avoid glitch.
+ *
+ * Delay 5 us.
+ *
+ * Deassert bg pwr dn and set numerator and denominator
+ *
+ * Start 7 us timer.
+ *
+ * set internal dividers
+ *
+ * Wait for 7 us timer.
+ *
+ * Enable plls
+ *
+ * Set external dividers while plls are locking
+ *
+ * Wait for pll lock
+ *
+ * Assert/deassert outreset all.
+ *
+ * Take all pll's out of bypass
+ *
+ * Clear safe mode
+ *
+ * set source main and peripheral clocks
+ *
+ * Ungate clocks
+ */
+
+static int cm_full_cfg(struct mainpll_cfg *main_cfg, struct perpll_cfg *per_cfg)
+{
+	unsigned int pll_ramp_main_hz = 0, pll_ramp_periph_hz = 0,
+		ramp_required;
+
+	/* gate off all mainpll clock excpet HW managed clock */
+	writel(CLKMGR_MAINPLL_EN_S2FUSER0CLKEN_SET_MSK |
+		CLKMGR_MAINPLL_EN_HMCPLLREFCLKEN_SET_MSK,
+		&clock_manager_base->main_pll.enr);
+
+	/* now we can gate off the rest of the peripheral clocks */
+	writel(0, &clock_manager_base->per_pll.en);
+
+	/* Put all plls in external bypass */
+	writel(CLKMGR_MAINPLL_BYPASS_RESET,
+		&clock_manager_base->main_pll.bypasss);
+	writel(CLKMGR_PERPLL_BYPASS_RESET,
+		&clock_manager_base->per_pll.bypasss);
+
+	/*
+	 * Put all plls VCO registers back to reset value.
+	 * Some code might have messed with them. At same time set the
+	 * desired clock source
+	 */
+	writel(CLKMGR_MAINPLL_VCO0_RESET |
+		CLKMGR_MAINPLL_VCO0_REGEXTSEL_SET_MSK |
+		(main_cfg->vco0_psrc <<
+			CLKMGR_MAINPLL_VCO0_PSRC_LSB),
+		&clock_manager_base->main_pll.vco0);
+
+	writel(CLKMGR_PERPLL_VCO0_RESET |
+		CLKMGR_PERPLL_VCO0_REGEXTSEL_SET_MSK |
+		(per_cfg->vco0_psrc <<
+			CLKMGR_PERPLL_VCO0_PSRC_LSB),
+		&clock_manager_base->per_pll.vco0);
+
+	writel(CLKMGR_MAINPLL_VCO1_RESET,
+		&clock_manager_base->main_pll.vco1);
+	writel(CLKMGR_PERPLL_VCO1_RESET,
+		&clock_manager_base->per_pll.vco1);
+
+	/* clear the interrupt register status register */
+	writel(CLKMGR_CLKMGR_INTR_MAINPLLLOST_SET_MSK |
+		CLKMGR_CLKMGR_INTR_PERPLLLOST_SET_MSK |
+		CLKMGR_CLKMGR_INTR_MAINPLLRFSLIP_SET_MSK |
+		CLKMGR_CLKMGR_INTR_PERPLLRFSLIP_SET_MSK |
+		CLKMGR_CLKMGR_INTR_MAINPLLFBSLIP_SET_MSK |
+		CLKMGR_CLKMGR_INTR_PERPLLFBSLIP_SET_MSK |
+		CLKMGR_CLKMGR_INTR_MAINPLLACHIEVED_SET_MSK |
+		CLKMGR_CLKMGR_INTR_PERPLLACHIEVED_SET_MSK,
+		&clock_manager_base->intr);
+
+	/* Program VCO ?Numerator? and ?Denominator? for main PLL */
+	ramp_required = cm_is_pll_ramp_required(0, main_cfg, per_cfg);
+	if (ramp_required) {
+		/* set main PLL to safe starting threshold frequency */
+		if (ramp_required == 1)
+			pll_ramp_main_hz = CLKMGR_PLL_RAMP_MPUCLK_THRESHOLD_HZ;
+		else if (ramp_required == 2)
+			pll_ramp_main_hz = CLKMGR_PLL_RAMP_NOCCLK_THRESHOLD_HZ;
+
+		writel((main_cfg->vco1_denom << CLKMGR_MAINPLL_VCO1_DENOM_LSB) |
+			cm_calc_safe_pll_numer(0, main_cfg, per_cfg,
+			pll_ramp_main_hz),
+			&clock_manager_base->main_pll.vco1);
+	} else
+		writel((main_cfg->vco1_denom << CLKMGR_MAINPLL_VCO1_DENOM_LSB) |
+			main_cfg->vco1_numer,
+			&clock_manager_base->main_pll.vco1);
+
+	/* Program VCO ?Numerator? and ?Denominator? for periph PLL */
+	ramp_required = cm_is_pll_ramp_required(1, main_cfg, per_cfg);
+	if (ramp_required) {
+		/* set periph PLL to safe starting threshold frequency */
+		if (ramp_required == 1)
+			pll_ramp_periph_hz =
+				CLKMGR_PLL_RAMP_MPUCLK_THRESHOLD_HZ;
+		else if (ramp_required == 2)
+			pll_ramp_periph_hz =
+				CLKMGR_PLL_RAMP_NOCCLK_THRESHOLD_HZ;
+
+		writel((per_cfg->vco1_denom << CLKMGR_PERPLL_VCO1_DENOM_LSB) |
+			cm_calc_safe_pll_numer(1, main_cfg, per_cfg,
+			pll_ramp_periph_hz),
+			&clock_manager_base->per_pll.vco1);
+	} else
+		writel((per_cfg->vco1_denom << CLKMGR_PERPLL_VCO1_DENOM_LSB) |
+			per_cfg->vco1_numer,
+			&clock_manager_base->per_pll.vco1);
+
+	/* Wait for at least 5 us */
+	udelay(5);
+
+	/* Now deassert BGPWRDN and PWRDN */
+	clrbits_le32(&clock_manager_base->main_pll.vco0,
+		CLKMGR_MAINPLL_VCO0_BGPWRDN_SET_MSK |
+		CLKMGR_MAINPLL_VCO0_PWRDN_SET_MSK);
+	clrbits_le32(&clock_manager_base->per_pll.vco0,
+		CLKMGR_PERPLL_VCO0_BGPWRDN_SET_MSK |
+		CLKMGR_PERPLL_VCO0_PWRDN_SET_MSK);
+
+	/* Wait for at least 7 us */
+	udelay(7);
+
+	/* enable the VCO and disable the external regulator to PLL */
+	writel((readl(&clock_manager_base->main_pll.vco0) &
+		~CLKMGR_MAINPLL_VCO0_REGEXTSEL_SET_MSK) |
+		CLKMGR_MAINPLL_VCO0_EN_SET_MSK,
+		&clock_manager_base->main_pll.vco0);
+	writel((readl(&clock_manager_base->per_pll.vco0) &
+		~CLKMGR_PERPLL_VCO0_REGEXTSEL_SET_MSK) |
+		CLKMGR_PERPLL_VCO0_EN_SET_MSK,
+		&clock_manager_base->per_pll.vco0);
+
+	/* setup all the main PLL counter and clock source */
+	writel(main_cfg->nocclk,
+	       SOCFPGA_CLKMGR_ADDRESS + CLKMGR_MAINPLL_NOC_CLK_OFFSET);
+	writel(main_cfg->mpuclk,
+	       SOCFPGA_CLKMGR_ADDRESS + CLKMGR_ALTERAGRP_MPU_CLK_OFFSET);
+
+	/* main_emaca_clk divider */
+	writel(main_cfg->cntr2clk_cnt,
+		&clock_manager_base->main_pll.cntr2clk);
+	/* main_emacb_clk divider */
+	writel(main_cfg->cntr3clk_cnt,
+		&clock_manager_base->main_pll.cntr3clk);
+	/* main_emac_ptp_clk divider */
+	writel(main_cfg->cntr4clk_cnt,
+		&clock_manager_base->main_pll.cntr4clk);
+	/* main_gpio_db_clk divider */
+	writel(main_cfg->cntr5clk_cnt,
+		&clock_manager_base->main_pll.cntr5clk);
+	/* main_sdmmc_clk divider */
+	writel(main_cfg->cntr6clk_cnt,
+		&clock_manager_base->main_pll.cntr6clk);
+	/* main_s2f_user0_clk divider */
+	writel(main_cfg->cntr7clk_cnt |
+		(main_cfg->cntr7clk_src <<
+			CLKMGR_MAINPLL_CNTR7CLK_SRC_LSB),
+		&clock_manager_base->main_pll.cntr7clk);
+	/* main_s2f_user1_clk divider */
+	writel(main_cfg->cntr8clk_cnt,
+		&clock_manager_base->main_pll.cntr8clk);
+	/* main_hmc_pll_clk divider */
+	writel(main_cfg->cntr9clk_cnt |
+		(main_cfg->cntr9clk_src <<
+			CLKMGR_MAINPLL_CNTR9CLK_SRC_LSB),
+		&clock_manager_base->main_pll.cntr9clk);
+	/* main_periph_ref_clk divider */
+	writel(main_cfg->cntr15clk_cnt,
+		&clock_manager_base->main_pll.cntr15clk);
+
+	/* setup all the peripheral PLL counter and clock source */
+	/* peri_emaca_clk divider */
+	writel(per_cfg->cntr2clk_cnt |
+		(per_cfg->cntr2clk_src << CLKMGR_PERPLL_CNTR2CLK_SRC_LSB),
+		&clock_manager_base->per_pll.cntr2clk);
+	/* peri_emacb_clk divider */
+	writel(per_cfg->cntr3clk_cnt |
+		(per_cfg->cntr3clk_src << CLKMGR_PERPLL_CNTR3CLK_SRC_LSB),
+		&clock_manager_base->per_pll.cntr3clk);
+	/* peri_emac_ptp_clk divider */
+	writel(per_cfg->cntr4clk_cnt |
+		(per_cfg->cntr4clk_src << CLKMGR_PERPLL_CNTR4CLK_SRC_LSB),
+		&clock_manager_base->per_pll.cntr4clk);
+	/* peri_gpio_db_clk divider */
+	writel(per_cfg->cntr5clk_cnt |
+		(per_cfg->cntr5clk_src << CLKMGR_PERPLL_CNTR5CLK_SRC_LSB),
+		&clock_manager_base->per_pll.cntr5clk);
+	/* peri_sdmmc_clk divider */
+	writel(per_cfg->cntr6clk_cnt |
+		(per_cfg->cntr6clk_src << CLKMGR_PERPLL_CNTR6CLK_SRC_LSB),
+		&clock_manager_base->per_pll.cntr6clk);
+	/* peri_s2f_user0_clk divider */
+	writel(per_cfg->cntr7clk_cnt,
+		&clock_manager_base->per_pll.cntr7clk);
+	/* peri_s2f_user1_clk divider */
+	writel(per_cfg->cntr8clk_cnt |
+		(per_cfg->cntr8clk_src << CLKMGR_PERPLL_CNTR8CLK_SRC_LSB),
+		&clock_manager_base->per_pll.cntr8clk);
+	/* peri_hmc_pll_clk divider */
+	writel(per_cfg->cntr9clk_cnt,
+		&clock_manager_base->per_pll.cntr9clk);
+
+	/* setup all the external PLL counter */
+	/* mpu wrapper / external divider */
+	writel(main_cfg->mpuclk_cnt |
+		(main_cfg->mpuclk_src <<
+			CLKMGR_MAINPLL_MPUCLK_SRC_LSB),
+		&clock_manager_base->main_pll.mpuclk);
+	/* NOC wrapper / external divider */
+	writel(main_cfg->nocclk_cnt |
+		(main_cfg->nocclk_src << CLKMGR_MAINPLL_NOCCLK_SRC_LSB),
+		&clock_manager_base->main_pll.nocclk);
+	/* NOC subclock divider such as l4 */
+	writel(main_cfg->nocdiv_l4mainclk |
+		(main_cfg->nocdiv_l4mpclk <<
+			CLKMGR_MAINPLL_NOCDIV_L4MPCLK_LSB) |
+		(main_cfg->nocdiv_l4spclk <<
+			CLKMGR_MAINPLL_NOCDIV_L4SPCLK_LSB) |
+		(main_cfg->nocdiv_csatclk <<
+			CLKMGR_MAINPLL_NOCDIV_CSATCLK_LSB) |
+		(main_cfg->nocdiv_cstraceclk <<
+			CLKMGR_MAINPLL_NOCDIV_CSTRACECLK_LSB) |
+		(main_cfg->nocdiv_cspdbclk <<
+			CLKMGR_MAINPLL_NOCDIV_CSPDBGCLK_LSB),
+		&clock_manager_base->main_pll.nocdiv);
+	/* gpio_db external divider */
+	writel(per_cfg->gpiodiv_gpiodbclk,
+		&clock_manager_base->per_pll.gpiodiv);
+
+	/* setup the EMAC clock mux select */
+	writel((per_cfg->emacctl_emac0sel <<
+			CLKMGR_PERPLL_EMACCTL_EMAC0SEL_LSB) |
+		(per_cfg->emacctl_emac1sel <<
+			CLKMGR_PERPLL_EMACCTL_EMAC1SEL_LSB) |
+		(per_cfg->emacctl_emac2sel <<
+			CLKMGR_PERPLL_EMACCTL_EMAC2SEL_LSB),
+		&clock_manager_base->per_pll.emacctl);
+
+	/* at this stage, check for PLL lock status */
+	cm_wait_for_lock(LOCKED_MASK);
+
+	/*
+	 * after locking, but before taking out of bypass,
+	 * assert/deassert outresetall
+	 */
+	/* assert mainpll outresetall */
+	setbits_le32(&clock_manager_base->main_pll.vco0,
+		CLKMGR_MAINPLL_VCO0_OUTRSTALL_SET_MSK);
+	/* assert perpll outresetall */
+	setbits_le32(&clock_manager_base->per_pll.vco0,
+		CLKMGR_PERPLL_VCO0_OUTRSTALL_SET_MSK);
+	/* de-assert mainpll outresetall */
+	clrbits_le32(&clock_manager_base->main_pll.vco0,
+		CLKMGR_MAINPLL_VCO0_OUTRSTALL_SET_MSK);
+	/* de-assert perpll outresetall */
+	clrbits_le32(&clock_manager_base->per_pll.vco0,
+		CLKMGR_PERPLL_VCO0_OUTRSTALL_SET_MSK);
+
+	/* Take all PLLs out of bypass when boot mode is cleared. */
+	/* release mainpll from bypass */
+	writel(CLKMGR_MAINPLL_BYPASS_RESET,
+		&clock_manager_base->main_pll.bypassr);
+	/* wait till Clock Manager is not busy */
+	cm_wait_for_fsm();
+
+	/* release perpll from bypass */
+	writel(CLKMGR_PERPLL_BYPASS_RESET,
+		&clock_manager_base->per_pll.bypassr);
+	/* wait till Clock Manager is not busy */
+	cm_wait_for_fsm();
+
+	/* clear boot mode */
+	clrbits_le32(&clock_manager_base->ctrl,
+		CLKMGR_CLKMGR_CTL_BOOTMOD_SET_MSK);
+	/* wait till Clock Manager is not busy */
+	cm_wait_for_fsm();
+
+	/* At here, we need to ramp to final value if needed */
+	if (pll_ramp_main_hz != 0)
+		cm_pll_ramp_main(main_cfg, per_cfg, pll_ramp_main_hz);
+	if (pll_ramp_periph_hz != 0)
+		cm_pll_ramp_periph(main_cfg, per_cfg, pll_ramp_periph_hz);
+
+	/* Now ungate non-hw-managed clocks */
+	writel(CLKMGR_MAINPLL_EN_S2FUSER0CLKEN_SET_MSK |
+		CLKMGR_MAINPLL_EN_HMCPLLREFCLKEN_SET_MSK,
+		&clock_manager_base->main_pll.ens);
+	writel(CLKMGR_PERPLL_EN_RESET,
+		&clock_manager_base->per_pll.ens);
+
+	/* Clear the loss lock and slip bits as they might set during
+	clock reconfiguration */
+	writel(CLKMGR_CLKMGR_INTR_MAINPLLLOST_SET_MSK |
+		CLKMGR_CLKMGR_INTR_PERPLLLOST_SET_MSK |
+		CLKMGR_CLKMGR_INTR_MAINPLLRFSLIP_SET_MSK |
+		CLKMGR_CLKMGR_INTR_PERPLLRFSLIP_SET_MSK |
+		CLKMGR_CLKMGR_INTR_MAINPLLFBSLIP_SET_MSK |
+		CLKMGR_CLKMGR_INTR_PERPLLFBSLIP_SET_MSK,
+		&clock_manager_base->intr);
+
+	return 0;
+}
+
+int cm_basic_init(const void *blob)
+{
+	struct mainpll_cfg main_cfg;
+	struct perpll_cfg per_cfg;
+	struct alteragrp_cfg altrgrp_cfg;
+	int rval;
+
+	/* initialize to zero for use case of optional node */
+	memset(&main_cfg, 0, sizeof(main_cfg));
+	memset(&per_cfg, 0, sizeof(per_cfg));
+	memset(&altrgrp_cfg, 0, sizeof(altrgrp_cfg));
+
+	if (of_get_clk_cfg(blob, &main_cfg, &per_cfg, &altrgrp_cfg)) {
+		return 1;
+	}
+
+	rval =  cm_full_cfg(&main_cfg, &per_cfg);
+
+	cm_l4_main_clk_hz =
+		cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MAINCLK_LSB);
+
+	cm_l4_mp_clk_hz = cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MPCLK_LSB);
+
+	cm_l4_sp_clk_hz = cm_get_l4_sp_clk_hz();
+
+	cm_l4_sys_free_clk_hz = cm_get_noc_clk_hz()/4;
+
+	return rval;
+}
diff --git a/arch/arm/mach-socfpga/clock_manager.c b/arch/arm/mach-socfpga/clock_manager_gen5.c
similarity index 62%
copy from arch/arm/mach-socfpga/clock_manager.c
copy to arch/arm/mach-socfpga/clock_manager_gen5.c
index aa71636..f4bb02b 100644
--- a/arch/arm/mach-socfpga/clock_manager.c
+++ b/arch/arm/mach-socfpga/clock_manager_gen5.c
@@ -1,7 +1,7 @@
 /*
- *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ * Copyright (C) 2016, Intel Corporation
  *
- * SPDX-License-Identifier:	GPL-2.0+
+ * SPDX-License-Identifier:    GPL-2.0
  */
 
 #include <common.h>
@@ -10,31 +10,19 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+const unsigned int cm_get_osc_clk_hz(const int osc);
+const unsigned int cm_get_f2s_per_ref_clk_hz(void);
+const unsigned int cm_get_f2s_sdr_ref_clk_hz(void);
+static void cm_write_bypass(uint32_t val);
+static void cm_write_ctrl(uint32_t val);
+static void cm_write_with_phase(uint32_t value,
+	  uint32_t reg_address, uint32_t mask);
+unsigned long cm_get_sdram_clk_hz(void);
+int set_cpu_clk_info(void);
+
 static const struct socfpga_clock_manager *clock_manager_base =
 	(struct socfpga_clock_manager *)SOCFPGA_CLKMGR_ADDRESS;
 
-static void cm_wait_for_lock(uint32_t mask)
-{
-	register uint32_t inter_val;
-	uint32_t retry = 0;
-	do {
-		inter_val = readl(&clock_manager_base->inter) & mask;
-		if (inter_val == mask)
-			retry++;
-		else
-			retry = 0;
-		if (retry >= 10)
-			break;
-	} while (1);
-}
-
-/* function to poll in the fsm busy bit */
-static void cm_wait_for_fsm(void)
-{
-	while (readl(&clock_manager_base->stat) & CLKMGR_STAT_BUSY)
-		;
-}
-
 /*
  * function to write the bypass register which requires a poll of the
  * busy bit
@@ -87,7 +75,6 @@ static void cm_write_with_phase(uint32_t value,
  * set source main and peripheral clocks
  * Ungate clocks
  */
-
 void cm_basic_init(const struct cm_config * const cfg)
 {
 	unsigned long end;
@@ -230,11 +217,6 @@ void cm_basic_init(const struct cm_config * const cfg)
 
 	writel(cfg->gpiodiv, &clock_manager_base->per_pll.gpiodiv);
 
-#define LOCKED_MASK \
-	(CLKMGR_INTER_SDRPLLLOCKED_MASK  | \
-	CLKMGR_INTER_PERPLLLOCKED_MASK  | \
-	CLKMGR_INTER_MAINPLLLOCKED_MASK)
-
 	cm_wait_for_lock(LOCKED_MASK);
 
 	/* write the sdram clock counters before toggling outreset all */
@@ -328,60 +310,6 @@ void cm_basic_init(const struct cm_config * const cfg)
 	       &clock_manager_base->inter);
 }
 
-static unsigned int cm_get_main_vco_clk_hz(void)
-{
-	uint32_t reg, clock;
-
-	/* get the main VCO clock */
-	reg = readl(&clock_manager_base->main_pll.vco);
-	clock = cm_get_osc_clk_hz(1);
-	clock /= ((reg & CLKMGR_MAINPLLGRP_VCO_DENOM_MASK) >>
-		  CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET) + 1;
-	clock *= ((reg & CLKMGR_MAINPLLGRP_VCO_NUMER_MASK) >>
-		  CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET) + 1;
-
-	return clock;
-}
-
-static unsigned int cm_get_per_vco_clk_hz(void)
-{
-	uint32_t reg, clock = 0;
-
-	/* identify PER PLL clock source */
-	reg = readl(&clock_manager_base->per_pll.vco);
-	reg = (reg & CLKMGR_PERPLLGRP_VCO_SSRC_MASK) >>
-	      CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET;
-	if (reg == CLKMGR_VCO_SSRC_EOSC1)
-		clock = cm_get_osc_clk_hz(1);
-	else if (reg == CLKMGR_VCO_SSRC_EOSC2)
-		clock = cm_get_osc_clk_hz(2);
-	else if (reg == CLKMGR_VCO_SSRC_F2S)
-		clock = cm_get_f2s_per_ref_clk_hz();
-
-	/* get the PER VCO clock */
-	reg = readl(&clock_manager_base->per_pll.vco);
-	clock /= ((reg & CLKMGR_PERPLLGRP_VCO_DENOM_MASK) >>
-		  CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET) + 1;
-	clock *= ((reg & CLKMGR_PERPLLGRP_VCO_NUMER_MASK) >>
-		  CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET) + 1;
-
-	return clock;
-}
-
-unsigned long cm_get_mpu_clk_hz(void)
-{
-	uint32_t reg, clock;
-
-	clock = cm_get_main_vco_clk_hz();
-
-	/* get the MPU clock */
-	reg = readl(&clock_manager_base->altera.mpuclk);
-	clock /= (reg + 1);
-	reg = readl(&clock_manager_base->main_pll.mpuclk);
-	clock /= (reg + 1);
-	return clock;
-}
-
 unsigned long cm_get_sdram_clk_hz(void)
 {
 	uint32_t reg, clock = 0;
@@ -412,147 +340,3 @@ unsigned long cm_get_sdram_clk_hz(void)
 
 	return clock;
 }
-
-unsigned int cm_get_l4_sp_clk_hz(void)
-{
-	uint32_t reg, clock = 0;
-
-	/* identify the source of L4 SP clock */
-	reg = readl(&clock_manager_base->main_pll.l4src);
-	reg = (reg & CLKMGR_MAINPLLGRP_L4SRC_L4SP) >>
-	      CLKMGR_MAINPLLGRP_L4SRC_L4SP_OFFSET;
-
-	if (reg == CLKMGR_L4_SP_CLK_SRC_MAINPLL) {
-		clock = cm_get_main_vco_clk_hz();
-
-		/* get the clock prior L4 SP divider (main clk) */
-		reg = readl(&clock_manager_base->altera.mainclk);
-		clock /= (reg + 1);
-		reg = readl(&clock_manager_base->main_pll.mainclk);
-		clock /= (reg + 1);
-	} else if (reg == CLKMGR_L4_SP_CLK_SRC_PERPLL) {
-		clock = cm_get_per_vco_clk_hz();
-
-		/* get the clock prior L4 SP divider (periph_base_clk) */
-		reg = readl(&clock_manager_base->per_pll.perbaseclk);
-		clock /= (reg + 1);
-	}
-
-	/* get the L4 SP clock which supplied to UART */
-	reg = readl(&clock_manager_base->main_pll.maindiv);
-	reg = (reg & CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_MASK) >>
-	      CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET;
-	clock = clock / (1 << reg);
-
-	return clock;
-}
-
-unsigned int cm_get_mmc_controller_clk_hz(void)
-{
-	uint32_t reg, clock = 0;
-
-	/* identify the source of MMC clock */
-	reg = readl(&clock_manager_base->per_pll.src);
-	reg = (reg & CLKMGR_PERPLLGRP_SRC_SDMMC_MASK) >>
-	      CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET;
-
-	if (reg == CLKMGR_SDMMC_CLK_SRC_F2S) {
-		clock = cm_get_f2s_per_ref_clk_hz();
-	} else if (reg == CLKMGR_SDMMC_CLK_SRC_MAIN) {
-		clock = cm_get_main_vco_clk_hz();
-
-		/* get the SDMMC clock */
-		reg = readl(&clock_manager_base->main_pll.mainnandsdmmcclk);
-		clock /= (reg + 1);
-	} else if (reg == CLKMGR_SDMMC_CLK_SRC_PER) {
-		clock = cm_get_per_vco_clk_hz();
-
-		/* get the SDMMC clock */
-		reg = readl(&clock_manager_base->per_pll.pernandsdmmcclk);
-		clock /= (reg + 1);
-	}
-
-	/* further divide by 4 as we have fixed divider at wrapper */
-	clock /= 4;
-	return clock;
-}
-
-unsigned int cm_get_qspi_controller_clk_hz(void)
-{
-	uint32_t reg, clock = 0;
-
-	/* identify the source of QSPI clock */
-	reg = readl(&clock_manager_base->per_pll.src);
-	reg = (reg & CLKMGR_PERPLLGRP_SRC_QSPI_MASK) >>
-	      CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET;
-
-	if (reg == CLKMGR_QSPI_CLK_SRC_F2S) {
-		clock = cm_get_f2s_per_ref_clk_hz();
-	} else if (reg == CLKMGR_QSPI_CLK_SRC_MAIN) {
-		clock = cm_get_main_vco_clk_hz();
-
-		/* get the qspi clock */
-		reg = readl(&clock_manager_base->main_pll.mainqspiclk);
-		clock /= (reg + 1);
-	} else if (reg == CLKMGR_QSPI_CLK_SRC_PER) {
-		clock = cm_get_per_vco_clk_hz();
-
-		/* get the qspi clock */
-		reg = readl(&clock_manager_base->per_pll.perqspiclk);
-		clock /= (reg + 1);
-	}
-
-	return clock;
-}
-
-unsigned int cm_get_spi_controller_clk_hz(void)
-{
-	uint32_t reg, clock = 0;
-
-	clock = cm_get_per_vco_clk_hz();
-
-	/* get the clock prior L4 SP divider (periph_base_clk) */
-	reg = readl(&clock_manager_base->per_pll.perbaseclk);
-	clock /= (reg + 1);
-
-	return clock;
-}
-
-static void cm_print_clock_quick_summary(void)
-{
-	printf("MPU       %10ld kHz\n", cm_get_mpu_clk_hz() / 1000);
-	printf("DDR       %10ld kHz\n", cm_get_sdram_clk_hz() / 1000);
-	printf("EOSC1       %8d kHz\n", cm_get_osc_clk_hz(1) / 1000);
-	printf("EOSC2       %8d kHz\n", cm_get_osc_clk_hz(2) / 1000);
-	printf("F2S_SDR_REF %8d kHz\n", cm_get_f2s_sdr_ref_clk_hz() / 1000);
-	printf("F2S_PER_REF %8d kHz\n", cm_get_f2s_per_ref_clk_hz() / 1000);
-	printf("MMC         %8d kHz\n", cm_get_mmc_controller_clk_hz() / 1000);
-	printf("QSPI        %8d kHz\n", cm_get_qspi_controller_clk_hz() / 1000);
-	printf("UART        %8d kHz\n", cm_get_l4_sp_clk_hz() / 1000);
-	printf("SPI         %8d kHz\n", cm_get_spi_controller_clk_hz() / 1000);
-}
-
-int set_cpu_clk_info(void)
-{
-	/* Calculate the clock frequencies required for drivers */
-	cm_get_l4_sp_clk_hz();
-	cm_get_mmc_controller_clk_hz();
-
-	gd->bd->bi_arm_freq = cm_get_mpu_clk_hz() / 1000000;
-	gd->bd->bi_dsp_freq = 0;
-	gd->bd->bi_ddr_freq = cm_get_sdram_clk_hz() / 1000000;
-
-	return 0;
-}
-
-int do_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	cm_print_clock_quick_summary();
-	return 0;
-}
-
-U_BOOT_CMD(
-	clocks,	CONFIG_SYS_MAXARGS, 1, do_showclocks,
-	"display clocks",
-	""
-);
diff --git a/arch/arm/mach-socfpga/include/mach/clock_manager.h b/arch/arm/mach-socfpga/include/mach/clock_manager.h
index 2675951..45943ea 100644
--- a/arch/arm/mach-socfpga/include/mach/clock_manager.h
+++ b/arch/arm/mach-socfpga/include/mach/clock_manager.h
@@ -1,5 +1,5 @@
 /*
- *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *  Copyright (C) 2013-2016 Altera Corporation <www.altera.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -8,21 +8,9 @@
 #define	_CLOCK_MANAGER_H_
 
 #ifndef __ASSEMBLER__
-/* Clock speed accessors */
-unsigned long cm_get_mpu_clk_hz(void);
-unsigned long cm_get_sdram_clk_hz(void);
-unsigned int cm_get_l4_sp_clk_hz(void);
-unsigned int cm_get_mmc_controller_clk_hz(void);
-unsigned int cm_get_qspi_controller_clk_hz(void);
-unsigned int cm_get_spi_controller_clk_hz(void);
-const unsigned int cm_get_osc_clk_hz(const int osc);
-const unsigned int cm_get_f2s_per_ref_clk_hz(void);
-const unsigned int cm_get_f2s_sdr_ref_clk_hz(void);
-
-/* Clock configuration accessors */
-const struct cm_config * const cm_get_default_config(void);
-#endif
+#include <linux/types.h>
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 struct cm_config {
 	/* main group */
 	uint32_t main_vco_base;
@@ -57,74 +45,196 @@ struct cm_config {
 	uint32_t s2fuser2clk;
 };
 
+struct socfpga_clock_manager_sdr_pll {
+	uint32_t	vco;
+	uint32_t	ctrl;
+	uint32_t	ddrdqsclk;
+	uint32_t	ddr2xdqsclk;
+	uint32_t	ddrdqclk;
+	uint32_t	s2fuser2clk;
+	uint32_t	en;
+	uint32_t	stat;
+};
+#endif
+
+/* Common prototypes */
+unsigned int cm_get_l4_sp_clk_hz(void);
+unsigned int cm_get_qspi_controller_clk_hz(void);
+unsigned int cm_get_mmc_controller_clk_hz(void);
+unsigned int cm_get_spi_controller_clk_hz(void);
+void cm_use_intosc(void);
+void cm_wait_for_lock(uint32_t mask);
+void cm_wait_for_fsm(void);
+unsigned int cm_get_main_vco_clk_hz(void);
+unsigned int cm_get_per_vco_clk_hz(void);
+unsigned long cm_get_mpu_clk_hz(void);
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+/* Clock speed accessors */
+const unsigned int cm_get_osc_clk_hz(const int osc);
+const unsigned int cm_get_f2s_per_ref_clk_hz(void);
+const unsigned int cm_get_f2s_sdr_ref_clk_hz(void);
 void cm_basic_init(const struct cm_config * const cfg);
+unsigned long cm_get_sdram_clk_hz(void);
+/* Clock configuration accessors */
+const struct cm_config * const cm_get_default_config(void);
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+unsigned int cm_get_noc_clk_hz(void);
+unsigned int cm_get_l4_noc_hz(unsigned int nocdivshift);
+int cm_basic_init(const void* blob);
+extern unsigned int cm_l4_main_clk_hz;
+extern unsigned int cm_l4_sp_clk_hz;
+extern unsigned int cm_l4_mp_clk_hz;
+extern unsigned int cm_l4_sys_free_clk_hz;
+extern uint32_t eosc1_hz;
+extern uint32_t cb_intosc_hz;
+extern uint32_t f2s_free_hz;
+#endif
+#endif
 
 struct socfpga_clock_manager_main_pll {
-	u32	vco;
-	u32	misc;
-	u32	mpuclk;
-	u32	mainclk;
-	u32	dbgatclk;
-	u32	mainqspiclk;
-	u32	mainnandsdmmcclk;
-	u32	cfgs2fuser0clk;
-	u32	en;
-	u32	maindiv;
-	u32	dbgdiv;
-	u32	tracediv;
-	u32	l4src;
-	u32	stat;
-	u32	_pad_0x38_0x40[2];
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+	uint32_t	vco;
+	uint32_t	misc;
+	uint32_t	mpuclk;
+	uint32_t	mainclk;
+	uint32_t	dbgatclk;
+	uint32_t	mainqspiclk;
+	uint32_t	mainnandsdmmcclk;
+	uint32_t	cfgs2fuser0clk;
+	uint32_t	en;
+	uint32_t	maindiv;
+	uint32_t	dbgdiv;
+	uint32_t	tracediv;
+	uint32_t	l4src;
+	uint32_t	stat;
+	uint32_t	_pad_0x38_0x40[2];
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+	uint32_t  vco0;
+	uint32_t  vco1;
+	uint32_t  en;
+	uint32_t  ens;
+	uint32_t  enr;
+	uint32_t  bypass;
+	uint32_t  bypasss;
+	uint32_t  bypassr;
+	uint32_t  mpuclk;
+	uint32_t  nocclk;
+	uint32_t  cntr2clk;
+	uint32_t  cntr3clk;
+	uint32_t  cntr4clk;
+	uint32_t  cntr5clk;
+	uint32_t  cntr6clk;
+	uint32_t  cntr7clk;
+	uint32_t  cntr8clk;
+	uint32_t  cntr9clk;
+	uint32_t  pad_0x48_0x5b[5];
+	uint32_t  cntr15clk;
+	uint32_t  outrst;
+	uint32_t  outrststat;
+	uint32_t  nocdiv;
+	uint32_t  pad_0x6c_0x80[5];
+#endif
 };
 
 struct socfpga_clock_manager_per_pll {
-	u32	vco;
-	u32	misc;
-	u32	emac0clk;
-	u32	emac1clk;
-	u32	perqspiclk;
-	u32	pernandsdmmcclk;
-	u32	perbaseclk;
-	u32	s2fuser1clk;
-	u32	en;
-	u32	div;
-	u32	gpiodiv;
-	u32	src;
-	u32	stat;
-	u32	_pad_0x34_0x40[3];
-};
-
-struct socfpga_clock_manager_sdr_pll {
-	u32	vco;
-	u32	ctrl;
-	u32	ddrdqsclk;
-	u32	ddr2xdqsclk;
-	u32	ddrdqclk;
-	u32	s2fuser2clk;
-	u32	en;
-	u32	stat;
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+	uint32_t	vco;
+	uint32_t	misc;
+	uint32_t	emac0clk;
+	uint32_t	emac1clk;
+	uint32_t	perqspiclk;
+	uint32_t	pernandsdmmcclk;
+	uint32_t	perbaseclk;
+	uint32_t	s2fuser1clk;
+	uint32_t	en;
+	uint32_t	div;
+	uint32_t	gpiodiv;
+	uint32_t	src;
+	uint32_t	stat;
+	uint32_t	_pad_0x34_0x40[3];
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+	uint32_t  vco0;
+	uint32_t  vco1;
+	uint32_t  en;
+	uint32_t  ens;
+	uint32_t  enr;
+	uint32_t  bypass;
+	uint32_t  bypasss;
+	uint32_t  bypassr;
+	uint32_t  pad_0x20_0x27[2];
+	uint32_t  cntr2clk;
+	uint32_t  cntr3clk;
+	uint32_t  cntr4clk;
+	uint32_t  cntr5clk;
+	uint32_t  cntr6clk;
+	uint32_t  cntr7clk;
+	uint32_t  cntr8clk;
+	uint32_t  cntr9clk;
+	uint32_t  pad_0x48_0x5f[6];
+	uint32_t  outrst;
+	uint32_t  outrststat;
+	uint32_t  emacctl;
+	uint32_t  gpiodiv;
+	uint32_t  pad_0x70_0x80[4];
+#endif
 };
 
 struct socfpga_clock_manager_altera {
-	u32	mpuclk;
-	u32	mainclk;
+	uint32_t	mpuclk;
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+	uint32_t	mainclk;
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+	uint32_t	nocclk;
+	uint32_t	mainmisc0;
+	uint32_t	mainmisc1;
+	uint32_t	perimisc0;
+	uint32_t	perimisc1;
+#endif
 };
 
 struct socfpga_clock_manager {
-	u32	ctrl;
-	u32	bypass;
-	u32	inter;
-	u32	intren;
-	u32	dbctrl;
-	u32	stat;
-	u32	_pad_0x18_0x3f[10];
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+	uint32_t	ctrl;
+	uint32_t	bypass;
+	uint32_t	inter;
+	uint32_t	intren;
+	uint32_t	dbctrl;
+	uint32_t	stat;
+	uint32_t	_pad_0x18_0x3f[10];
 	struct socfpga_clock_manager_main_pll main_pll;
 	struct socfpga_clock_manager_per_pll per_pll;
 	struct socfpga_clock_manager_sdr_pll sdr_pll;
 	struct socfpga_clock_manager_altera altera;
-	u32	_pad_0xe8_0x200[70];
+	uint32_t	_pad_0xe8_0x200[70];
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+	/* clkmgr */
+	uint32_t  ctrl;
+	uint32_t  intr;
+	uint32_t  intrs;
+	uint32_t  intrr;
+	uint32_t  intren;
+	uint32_t  intrens;
+	uint32_t  intrenr;
+	uint32_t  stat;
+	uint32_t  testioctrl;
+	uint32_t  _pad_0x24_0x40[7];
+	/* mainpllgrp */
+	struct socfpga_clock_manager_main_pll main_pll;
+	/* perpllgrp */
+	struct socfpga_clock_manager_per_pll per_pll;
+	struct socfpga_clock_manager_altera altera;
+#endif
 };
 
+/* Common mask */
+#define CLKMGR_CLKMGR_STAT_BUSY_SET_MSK			0x00000001
+
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+#define LOCKED_MASK \
+	(CLKMGR_INTER_SDRPLLLOCKED_MASK  | \
+	CLKMGR_INTER_PERPLLLOCKED_MASK  | \
+	CLKMGR_INTER_MAINPLLLOCKED_MASK)
+
 #define CLKMGR_CTRL_SAFEMODE				(1 << 0)
 #define CLKMGR_CTRL_SAFEMODE_OFFSET			0
 
@@ -310,5 +420,119 @@ struct socfpga_clock_manager {
 #define CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK		0x000001ff
 #define CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_OFFSET	9
 #define CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK		0x00000e00
-
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#define CLKMGR_ALTERAGRP_MPU_CLK_OFFSET			0x140
+#define CLKMGR_MAINPLL_NOC_CLK_OFFSET			0x144
+#define LOCKED_MASK \
+	(CLKMGR_CLKMGR_STAT_MAINPLLLOCKED_SET_MSK  | \
+	CLKMGR_CLKMGR_STAT_PERPLLLOCKED_SET_MSK)
+
+/* value */
+#define CLKMGR_MAINPLL_BYPASS_RESET			0x0000003f
+#define CLKMGR_PERPLL_BYPASS_RESET			0x000000ff
+#define CLKMGR_MAINPLL_VCO0_RESET			0x00010053
+#define CLKMGR_MAINPLL_VCO1_RESET			0x00010001
+#define CLKMGR_PERPLL_VCO0_RESET			0x00010053
+#define CLKMGR_PERPLL_VCO1_RESET			0x00010001
+#define CLKMGR_MAINPLL_VCO0_PSRC_EOSC			0x0
+#define CLKMGR_MAINPLL_VCO0_PSRC_E_INTOSC		0x1
+#define CLKMGR_MAINPLL_VCO0_PSRC_F2S			0x2
+#define CLKMGR_PERPLL_VCO0_PSRC_EOSC			0x0
+#define CLKMGR_PERPLL_VCO0_PSRC_E_INTOSC		0x1
+#define CLKMGR_PERPLL_VCO0_PSRC_F2S			0x2
+#define CLKMGR_PERPLL_VCO0_PSRC_MAIN			0x3
+
+/* mask */
+#define CLKMGR_MAINPLL_EN_S2FUSER0CLKEN_SET_MSK		0x00000040
+#define CLKMGR_MAINPLL_EN_HMCPLLREFCLKEN_SET_MSK	0x00000080
+#define CLKMGR_CLKMGR_STAT_MAINPLLLOCKED_SET_MSK	0x00000100
+#define CLKMGR_CLKMGR_STAT_PERPLLLOCKED_SET_MSK		0x00000200
+#define CLKMGR_CLKMGR_STAT_BOOTCLKSRC_SET_MSK		0x00020000
+#define CLKMGR_MAINPLL_VCO0_BGPWRDN_SET_MSK		0x00000001
+#define CLKMGR_MAINPLL_VCO0_PWRDN_SET_MSK		0x00000002
+#define CLKMGR_MAINPLL_VCO0_EN_SET_MSK			0x00000004
+#define CLKMGR_MAINPLL_VCO0_OUTRSTALL_SET_MSK		0x00000008
+#define CLKMGR_MAINPLL_VCO0_REGEXTSEL_SET_MSK		0x00000010
+#define CLKMGR_PERPLL_VCO0_BGPWRDN_SET_MSK		0x00000001
+#define CLKMGR_PERPLL_VCO0_PWRDN_SET_MSK		0x00000002
+#define CLKMGR_PERPLL_VCO0_EN_SET_MSK			0x00000004
+#define CLKMGR_PERPLL_VCO0_OUTRSTALL_SET_MSK		0x00000008
+#define CLKMGR_PERPLL_VCO0_REGEXTSEL_SET_MSK		0x00000010
+#define CLKMGR_CLKMGR_INTR_PERPLLFBSLIP_SET_MSK		0x00000800
+#define CLKMGR_CLKMGR_INTR_MAINPLLFBSLIP_SET_MSK	0x00000400
+#define CLKMGR_CLKMGR_INTR_PERPLLRFSLIP_SET_MSK		0x00000200
+#define CLKMGR_CLKMGR_INTR_MAINPLLRFSLIP_SET_MSK	0x00000100
+#define CLKMGR_CLKMGR_INTR_PERPLLLOST_SET_MSK		0x00000008
+#define CLKMGR_CLKMGR_INTR_MAINPLLLOST_SET_MSK		0x00000004
+#define CLKMGR_CLKMGR_INTR_MAINPLLACHIEVED_SET_MSK	0x00000001
+#define CLKMGR_CLKMGR_INTR_PERPLLACHIEVED_SET_MSK	0x00000002
+#define CLKMGR_CLKMGR_CTL_BOOTMOD_SET_MSK		0x00000001
+#define CLKMGR_CLKMGR_CTL_BOOTCLK_INTOSC_SET_MSK	0x00000300
+#define CLKMGR_PERPLL_EN_RESET				0x00000f7f
+#define CLKMGR_PERPLLGRP_EN_SDMMCCLK_MASK		0x00000020
+#define CLKMGR_MAINPLL_VCO0_PSRC_MSK			0x00000003
+#define CLKMGR_MAINPLL_VCO1_NUMER_MSK			0x00001fff
+#define CLKMGR_MAINPLL_VCO1_DENOM_MSK			0x0000003f
+#define CLKMGR_MAINPLL_CNTRCLK_MSK			0x000003ff
+#define CLKMGR_PERPLL_VCO0_PSRC_MSK			0x00000003
+#define CLKMGR_PERPLL_VCO1_NUMER_MSK			0x00001fff
+#define CLKMGR_PERPLL_VCO1_DENOM_MSK			0x0000003f
+#define CLKMGR_PERPLL_CNTRCLK_MSK			0x000003ff
+#define CLKMGR_MAINPLL_MPUCLK_SRC_MSK			0x00000007
+#define CLKMGR_MAINPLL_MPUCLK_CNT_MSK			0x000003ff
+#define CLKMGR_MAINPLL_MPUCLK_SRC_MAIN			0
+#define CLKMGR_MAINPLL_MPUCLK_SRC_PERI			1
+#define CLKMGR_MAINPLL_MPUCLK_SRC_OSC1			2
+#define CLKMGR_MAINPLL_MPUCLK_SRC_INTOSC		3
+#define CLKMGR_MAINPLL_MPUCLK_SRC_FPGA			4
+#define CLKMGR_MAINPLL_NOCDIV_MSK			0x00000003
+#define CLKMGR_MAINPLL_NOCCLK_CNT_MSK			0x000003ff
+#define CLKMGR_MAINPLL_NOCCLK_SRC_MSK			0x00000007
+#define CLKMGR_MAINPLL_NOCCLK_SRC_MAIN		0
+#define CLKMGR_MAINPLL_NOCCLK_SRC_PERI		1
+#define CLKMGR_MAINPLL_NOCCLK_SRC_OSC1		2
+#define CLKMGR_MAINPLL_NOCCLK_SRC_INTOSC	3
+#define CLKMGR_MAINPLL_NOCCLK_SRC_FPGA		4
+
+#define CLKMGR_PERPLLGRP_SRC_MSK			0x00000007
+#define CLKMGR_PERPLLGRP_SRC_MAIN	0
+#define CLKMGR_PERPLLGRP_SRC_PERI	1
+#define CLKMGR_PERPLLGRP_SRC_OSC1	2
+#define CLKMGR_PERPLLGRP_SRC_INTOSC	3
+#define CLKMGR_PERPLLGRP_SRC_FPGA	4
+
+/* bit shifting macro */
+#define CLKMGR_MAINPLL_VCO0_PSRC_LSB		8
+#define CLKMGR_PERPLL_VCO0_PSRC_LSB		8
+#define CLKMGR_MAINPLL_VCO1_DENOM_LSB		16
+#define CLKMGR_PERPLL_VCO1_DENOM_LSB		16
+#define CLKMGR_MAINPLL_NOCCLK_PERICNT_LSB		16
+#define CLKMGR_MAINPLL_NOCCLK_SRC_LSB		16
+#define CLKMGR_MAINPLL_NOCDIV_L4MAINCLK_LSB	0
+#define CLKMGR_MAINPLL_NOCDIV_L4MPCLK_LSB	8
+#define CLKMGR_MAINPLL_NOCDIV_L4SPCLK_LSB	16
+#define CLKMGR_MAINPLL_NOCDIV_CSATCLK_LSB	24
+#define CLKMGR_MAINPLL_NOCDIV_CSTRACECLK_LSB	26
+#define CLKMGR_MAINPLL_NOCDIV_CSPDBGCLK_LSB	28
+#define CLKMGR_MAINPLL_MPUCLK_SRC_LSB		16
+#define CLKMGR_MAINPLL_MPUCLK_PERICNT_LSB	16
+#define CLKMGR_MAINPLL_NOCCLK_SRC_LSB		16
+#define CLKMGR_MAINPLL_CNTR7CLK_SRC_LSB		16
+#define CLKMGR_MAINPLL_CNTR9CLK_SRC_LSB		16
+#define CLKMGR_PERPLL_CNTR2CLK_SRC_LSB		16
+#define CLKMGR_PERPLL_CNTR3CLK_SRC_LSB		16
+#define CLKMGR_PERPLL_CNTR4CLK_SRC_LSB		16
+#define CLKMGR_PERPLL_CNTR5CLK_SRC_LSB		16
+#define CLKMGR_PERPLL_CNTR6CLK_SRC_LSB		16
+#define CLKMGR_PERPLL_CNTR8CLK_SRC_LSB		16
+#define CLKMGR_PERPLL_EMACCTL_EMAC0SEL_LSB	26
+#define CLKMGR_PERPLL_EMACCTL_EMAC1SEL_LSB	27
+#define CLKMGR_PERPLL_EMACCTL_EMAC2SEL_LSB	28
+
+/* PLL ramping work around */
+#define CLKMGR_PLL_RAMP_MPUCLK_THRESHOLD_HZ	900000000
+#define CLKMGR_PLL_RAMP_NOCCLK_THRESHOLD_HZ	300000000
+#define CLKMGR_PLL_RAMP_MPUCLK_INCREMENT_HZ	100000000
+#define CLKMGR_PLL_RAMP_NOCCLK_INCREMENT_HZ	 33000000
+#endif
 #endif /* _CLOCK_MANAGER_H_ */
-- 
1.7.7.4

[U-Boot] [v3 28/30] arm: socfpga: arria10: Added drivers for Arria10 pinmux/pins configuration

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
Changes for V3
- no changes
Changes for V2
- Removed extern declaration.
---
 arch/arm/mach-socfpga/include/mach/pinmux.h |   17 +++++
 arch/arm/mach-socfpga/pinmux.c              |  104 +++++++++++++++++++++++++++
 2 files changed, 121 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-socfpga/include/mach/pinmux.h
 create mode 100644 arch/arm/mach-socfpga/pinmux.c

diff --git a/arch/arm/mach-socfpga/include/mach/pinmux.h b/arch/arm/mach-socfpga/include/mach/pinmux.h
new file mode 100644
index 0000000..ff54caa
--- /dev/null
+++ b/arch/arm/mach-socfpga/include/mach/pinmux.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2016 Intel Corporation <www.intel.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#ifndef	_PINMUX_H_
+#define	_PINMUX_H_
+
+#ifndef __ASSEMBLY__
+int config_dedicated_pins(const void *blob);
+int config_pins(const void *blob, const char *pin_grp);
+#endif
+
+
+
+#endif /* _PINMUX_H_ */
diff --git a/arch/arm/mach-socfpga/pinmux.c b/arch/arm/mach-socfpga/pinmux.c
new file mode 100644
index 0000000..d45722f
--- /dev/null
+++ b/arch/arm/mach-socfpga/pinmux.c
@@ -0,0 +1,104 @@
+/*
+ *  Copyright (C) 2016 Intel Corporation <www.intel.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <fdtdec.h>
+#include <asm/arch/pinmux.h>
+
+int config_dedicated_pins(const void *blob);
+int config_pins(const void *blob, const char *pin_grp);
+static int __do_pinctr_pins(const void *blob, int child, const char *node_name);
+static int do_pinctrl_pins(const void *blob, int node, const char *child_name);
+
+static int __do_pinctr_pins(const void *blob, int child, const char *node_name)
+{
+	int len;
+	fdt_addr_t base_addr;
+	fdt_size_t size;
+	const u32 *cell;
+	u32 offset, value;
+
+	base_addr = fdtdec_get_addr_size(blob, child, "reg", &size);
+	if (base_addr != FDT_ADDR_T_NONE) {
+		cell = fdt_getprop(blob, child, "pinctrl-single,pins",
+			&len);
+		if (cell != NULL) {
+			debug("%p %d\n", cell, len);
+			for (;len > 0; len -= (2*sizeof(u32))) {
+				offset = fdt32_to_cpu(*cell++);
+				value = fdt32_to_cpu(*cell++);
+				debug("<0x%x 0x%x>\n", offset, value);
+				writel(value, base_addr + offset);
+			}
+			return 0;
+		}
+	}
+	return 1;
+}
+
+static int do_pinctrl_pins(const void *blob, int node, const char *child_name)
+{
+	int child, len;
+	const char *node_name;
+
+	child = fdt_first_subnode(blob, node);
+
+	if (child < 0)
+		return 2;
+
+	node_name = fdt_get_name(blob, child, &len);
+
+	while (node_name) {
+		if (!strcmp(child_name, node_name)) {
+			__do_pinctr_pins(blob, child, node_name);
+			return(0);
+		}
+		child = fdt_next_subnode(blob, child);
+
+		if (child < 0)
+			break;
+
+		node_name = fdt_get_name(blob, child, &len);
+	}
+
+	return 1;
+}
+
+int config_dedicated_pins(const void *blob)
+{
+	int node;
+
+	node = fdtdec_next_compatible(blob, 0,
+			COMPAT_ALTERA_SOCFPGA_PINCTRL_SINGLE);
+
+	if (node < 0)
+		return 1;
+
+	if (do_pinctrl_pins(blob, node, "dedicated_cfg"))
+		return 2;
+
+	if (do_pinctrl_pins(blob, node, "dedicated"))
+		return 3;
+
+	return 0;
+}
+
+int config_pins(const void *blob, const char *pin_grp)
+{
+	int node;
+
+	node = fdtdec_next_compatible(blob, 0,
+			COMPAT_ALTERA_SOCFPGA_PINCTRL_SINGLE);
+
+	if (node < 0)
+		return 1;
+
+	if (do_pinctrl_pins(blob, node, pin_grp))
+		return 2;
+
+	return 0;
+}
-- 
1.7.7.4

[U-Boot] [v3 29/30] arm: socfpga: arria10: Added Arria10 critical HW initialization to spl

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

This patch adding the Arria10 critical hardware initialization before
enabling console print out in spl.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
Changes for V3
- Created common spl_boot_device() for both gen5 and Arria10.
Changes for V2
- Release UART from reset before enalbing console, and reverting license
  changes.
---
 arch/arm/mach-socfpga/spl.c |   79 +++++++++++++++++++++++++++++++++++++++++--
 1 files changed, 76 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-socfpga/spl.c b/arch/arm/mach-socfpga/spl.c
index fec4c7a..d381904 100644
--- a/arch/arm/mach-socfpga/spl.c
+++ b/arch/arm/mach-socfpga/spl.c
@@ -1,5 +1,5 @@
 /*
- *  Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *  Copyright (C) 2012-2016 Altera Corporation <www.altera.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -19,37 +19,58 @@
 #include <asm/arch/sdram.h>
 #include <asm/arch/scu.h>
 #include <asm/arch/nic301.h>
+#include <asm/sections.h>
+#include <watchdog.h>
+#include <fdtdec.h>
+#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#include <asm/arch/pinmux.h>
+#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+#define BOOTINFO_BSEL_SHIFT	0
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#define BOOTINFO_BSEL_SHIFT	12
+#endif
+
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 static struct pl310_regs *const pl310 =
 	(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
 static struct scu_registers *scu_regs =
 	(struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS;
 static struct nic301_registers *nic301_regs =
 	(struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS;
-static struct socfpga_system_manager *sysmgr_regs =
+#endif
+
+static const struct socfpga_system_manager *sysmgr_regs =
 	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
 
 u32 spl_boot_device(void)
 {
 	const u32 bsel = readl(&sysmgr_regs->bootinfo);
 
-	switch (bsel & 0x7) {
+	switch ((bsel >> BOOTINFO_BSEL_SHIFT) & 0x7) {
 	case 0x1:	/* FPGA (HPS2FPGA Bridge) */
 		return BOOT_DEVICE_RAM;
 	case 0x2:	/* NAND Flash (1.8V) */
 	case 0x3:	/* NAND Flash (3.0V) */
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 		socfpga_per_reset(SOCFPGA_RESET(NAND), 0);
+#endif
 		return BOOT_DEVICE_NAND;
 	case 0x4:	/* SD/MMC External Transceiver (1.8V) */
 	case 0x5:	/* SD/MMC Internal Transceiver (3.0V) */
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 		socfpga_per_reset(SOCFPGA_RESET(SDMMC), 0);
 		socfpga_per_reset(SOCFPGA_RESET(DMA), 0);
+#endif
 		return BOOT_DEVICE_MMC1;
 	case 0x6:	/* QSPI Flash (1.8V) */
 	case 0x7:	/* QSPI Flash (3.0V) */
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 		socfpga_per_reset(SOCFPGA_RESET(QSPI), 0);
+#endif
 		return BOOT_DEVICE_SPI;
 	default:
 		printf("Invalid boot device (bsel=%08x)!\n", bsel);
@@ -68,6 +89,7 @@ u32 spl_boot_mode(const u32 boot_device)
 }
 #endif
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 static void socfpga_nic301_slave_ns(void)
 {
 	writel(0x1, &nic301_regs->lwhps2fpgaregs);
@@ -182,3 +204,54 @@ void board_init_f(ulong dummy)
 	/* Configure simple malloc base pointer into RAM. */
 	gd->malloc_base = CONFIG_SYS_TEXT_BASE + (1024 * 1024);
 }
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+void board_init_f(ulong dummy)
+{
+	memset(__bss_start, 0, __bss_end - __bss_start);
+	/*
+	 * Configure Clock Manager to use intosc clock instead external osc to
+	 * ensure success watchdog operation. We do it as early as possible.
+	 */
+	cm_use_intosc();
+
+	watchdog_disable();
+
+	arch_early_init_r();
+
+#ifdef CONFIG_HW_WATCHDOG
+	/* release osc1 watchdog timer 0 from reset */
+	reset_deassert_osc1wd0();
+
+	/* reconfigure and enable the watchdog */
+	hw_watchdog_init();
+	WATCHDOG_RESET();
+#endif /* CONFIG_HW_WATCHDOG */
+
+#ifdef CONFIG_OF_CONTROL
+	/* We need to access to FDT as this stage */
+	/* FDT is at end of image */
+	gd->fdt_blob = (void *)(__bss_end);
+	/* Check whether we have a valid FDT or not. */
+	if (fdtdec_prepare_fdt()) {
+		panic("** CONFIG_OF_CONTROL defined but no FDT - please see "
+			"doc/README.fdt-control");
+	}
+#endif /* CONFIG_OF_CONTROL */
+
+	/* Initialize the timer */
+	timer_init();
+
+	/* configuring the clock based on handoff */
+	cm_basic_init(gd->fdt_blob);
+	WATCHDOG_RESET();
+
+	config_dedicated_pins(gd->fdt_blob);
+	WATCHDOG_RESET();
+
+	/* Release UART from reset */
+	reset_deassert_uart();
+
+	/* enable console uart printing */
+	preloader_console_init();
+}
+#endif
-- 
1.7.7.4

[U-Boot] [v3 30/30] arm: socfpga: arria10: Enable fpga driver build for SPL.

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee@intel.com>

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Tien Fong <skywindctf@gmail.com>
---
Changes for V3
- no changes
Changes for V2
- resolved build error of undefined some functions in fpga driver for SPL
  build
---
 drivers/Makefile |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/Makefile b/drivers/Makefile
index c19fa14..c15796b 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -9,7 +9,7 @@ obj-$(CONFIG_$(SPL_)PINCTRL)	+= pinctrl/
 obj-$(CONFIG_$(SPL_)RAM)	+= ram/
 
 ifdef CONFIG_SPL_BUILD
-
+obj-$(CONFIG_FPGA) += fpga/
 obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/
 obj-$(CONFIG_SPL_I2C_SUPPORT) += i2c/
 obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/
-- 
1.7.7.4