[PATCH 00/16] arm: dts: extend mt7623 support

[PATCH 00/16] arm: dts: extend mt7623 support

[John Crispin]

This series extends the dts files used for booting mt7623 base boards.
Since support for mt7623 was added around v4.6, many new drivers have
been accepted upstream. The contained patches add several of these to
the devicetree.

Additionally the series does a bit of refactoring. MTK/WCN pointed out
that the evaluation board is infact a reference design and asked the the
evb files be renamed to rfb.

As with all of the current ARM bases MTK silicon, these boards also have
a PMIC. Instead of adding the nodes to all of the dts files, we add an
intermediate dtsi file that contains the required nodes. This allows us
to reduce the size of the top most dts files.

The RFB comes in various versions and asiarf has even done a crowdfunder
to sell them. We should try to reduce the duplication. This series adds
a common dtsi file for these boards. This results in the topmost dts files
only needing to specify the compatible string, MTD nodes and ethernet setup.

John Crispin (16):
  arm: dts: add clock controller device nodes
  arm: dts: add subsystem clock controller device nodes
  arm: dts: add power domain controller device node
  arm: dts: add clock-frequency to the a7 timer node to mt7623.dtsi
  arm: dts: add pinctrl nodes to the mt7623 dtsi file
  arm: dts: add pmic nodes to the mt7623 dtsi file
  arm: dts: add i2c nodes to the mt7623.dtsi file
  arm: dts: add spi nodes to the mt7623.dtsi file
  arm: dts: add nand nodes to the mt7623.dtsi file
  arm: dts: add mmc nodes to the mt7623.dtsi file
  arm: dts: add usb nodes to the mt7623.dtsi file
  arm: dts: add mt7623-mt6323.dtsi file
  arm: dts: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi
  arm: dts: cleanup the mt7623n rfb uart nodes
  arm: dts: enable the usb device on the mt7623n rfb
  arm: dts: enable the nand device on the mt7623n nand rfb

 Documentation/devicetree/bindings/arm/mediatek.txt |    4 +-
 arch/arm/boot/dts/Makefile                         |    2 +-
 arch/arm/boot/dts/mt7623-evb.dts                   |   33 ---
 arch/arm/boot/dts/mt7623-mt6323.dtsi               |  273 ++++++++++++++++++
 arch/arm/boot/dts/mt7623.dtsi                      |  297 +++++++++++++++++++-
 arch/arm/boot/dts/mt7623n-rfb-nand.dts             |  109 +++++++
 arch/arm/boot/dts/mt7623n-rfb.dtsi                 |   61 ++++
 7 files changed, 730 insertions(+), 49 deletions(-)
 delete mode 100644 arch/arm/boot/dts/mt7623-evb.dts
 create mode 100644 arch/arm/boot/dts/mt7623-mt6323.dtsi
 create mode 100644 arch/arm/boot/dts/mt7623n-rfb-nand.dts
 create mode 100644 arch/arm/boot/dts/mt7623n-rfb.dtsi

-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 00/16] arm: dts: extend mt7623 support

[John Crispin]

This series extends the dts files used for booting mt7623 base boards.
Since support for mt7623 was added around v4.6, many new drivers have
been accepted upstream. The contained patches add several of these to
the devicetree.

Additionally the series does a bit of refactoring. MTK/WCN pointed out
that the evaluation board is infact a reference design and asked the the
evb files be renamed to rfb.

As with all of the current ARM bases MTK silicon, these boards also have
a PMIC. Instead of adding the nodes to all of the dts files, we add an
intermediate dtsi file that contains the required nodes. This allows us
to reduce the size of the top most dts files.

The RFB comes in various versions and asiarf has even done a crowdfunder
to sell them. We should try to reduce the duplication. This series adds
a common dtsi file for these boards. This results in the topmost dts files
only needing to specify the compatible string, MTD nodes and ethernet setup.

John Crispin (16):
  arm: dts: add clock controller device nodes
  arm: dts: add subsystem clock controller device nodes
  arm: dts: add power domain controller device node
  arm: dts: add clock-frequency to the a7 timer node to mt7623.dtsi
  arm: dts: add pinctrl nodes to the mt7623 dtsi file
  arm: dts: add pmic nodes to the mt7623 dtsi file
  arm: dts: add i2c nodes to the mt7623.dtsi file
  arm: dts: add spi nodes to the mt7623.dtsi file
  arm: dts: add nand nodes to the mt7623.dtsi file
  arm: dts: add mmc nodes to the mt7623.dtsi file
  arm: dts: add usb nodes to the mt7623.dtsi file
  arm: dts: add mt7623-mt6323.dtsi file
  arm: dts: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi
  arm: dts: cleanup the mt7623n rfb uart nodes
  arm: dts: enable the usb device on the mt7623n rfb
  arm: dts: enable the nand device on the mt7623n nand rfb

 Documentation/devicetree/bindings/arm/mediatek.txt |    4 +-
 arch/arm/boot/dts/Makefile                         |    2 +-
 arch/arm/boot/dts/mt7623-evb.dts                   |   33 ---
 arch/arm/boot/dts/mt7623-mt6323.dtsi               |  273 ++++++++++++++++++
 arch/arm/boot/dts/mt7623.dtsi                      |  297 +++++++++++++++++++-
 arch/arm/boot/dts/mt7623n-rfb-nand.dts             |  109 +++++++
 arch/arm/boot/dts/mt7623n-rfb.dtsi                 |   61 ++++
 7 files changed, 730 insertions(+), 49 deletions(-)
 delete mode 100644 arch/arm/boot/dts/mt7623-evb.dts
 create mode 100644 arch/arm/boot/dts/mt7623-mt6323.dtsi
 create mode 100644 arch/arm/boot/dts/mt7623n-rfb-nand.dts
 create mode 100644 arch/arm/boot/dts/mt7623n-rfb.dtsi

-- 
1.7.10.4

[PATCH 01/16] arm: dts: add clock controller device nodes

[John Crispin]

Add clock controller nodes for MT7623, including topckgen, infracfg,
pericfg and apmixedsys. This patch also cleans up two oscillators that
provide clocks for MT7623. Switch the uart clocks to the real ones while
at it.

Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
---
 arch/arm/boot/dts/mt7623.dtsi |   60 ++++++++++++++++++++++++++++++++++-------
 1 file changed, 51 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index fd2b614..592fc0a 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -14,6 +14,8 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt2701-clk.h>
+#include <dt-bindings/reset/mt2701-resets.h>
 #include "skeleton64.dtsi"
 
 / {
@@ -53,16 +55,18 @@
 		#clock-cells = <0>;
 	};
 
-	rtc_clk: dummy32k {
+	rtc32k: oscillator@1 {
 		compatible = "fixed-clock";
-		clock-frequency = <32000>;
 		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "rtc32k";
 	};
 
-	uart_clk: dummy26m {
+	clk26m: oscillator@0 {
 		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
 		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
 	};
 
 	timer {
@@ -74,6 +78,32 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
+	topckgen: syscon@10000000 {
+		compatible = "mediatek,mt7623-topckgen",
+			     "mediatek,mt2701-topckgen",
+			     "syscon";
+		reg = <0 0x10000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	infracfg: syscon@10001000 {
+		compatible = "mediatek,mt2701-infracfg",
+			     "mediatek,mt7623-infracfg",
+			     "syscon";
+		reg = <0 0x10001000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pericfg: syscon@10003000 {
+		compatible =  "mediatek,mt7623-pericfg",
+			      "mediatek,mt2701-pericfg",
+			      "syscon";
+		reg = <0 0x10003000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
 	watchdog: watchdog@10007000 {
 		compatible = "mediatek,mt7623-wdt",
 			     "mediatek,mt6589-wdt";
@@ -85,7 +115,7 @@
 			     "mediatek,mt6577-timer";
 		reg = <0 0x10008000 0 0x80>;
 		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&system_clk>, <&rtc_clk>;
+		clocks = <&system_clk>, <&rtc32k>;
 		clock-names = "system-clk", "rtc-clk";
 	};
 
@@ -98,6 +128,14 @@
 		reg = <0 0x10200100 0 0x1c>;
 	};
 
+	apmixedsys: syscon@10209000 {
+		compatible = "mediatek,mt2701-apmixedsys",
+			     "mediatek,mt2701-apmixedsys",
+			     "syscon";
+		reg = <0 0x10209000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
 	gic: interrupt-controller@10211000 {
 		compatible = "arm,cortex-a7-gic";
 		interrupt-controller;
@@ -114,7 +152,8 @@
 			     "mediatek,mt6577-uart";
 		reg = <0 0x11002000 0 0x400>;
 		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
+		clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+		clock-names = "baud", "bus";
 		status = "disabled";
 	};
 
@@ -123,7 +162,8 @@
 			     "mediatek,mt6577-uart";
 		reg = <0 0x11003000 0 0x400>;
 		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
+		clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+		clock-names = "baud", "bus";
 		status = "disabled";
 	};
 
@@ -132,7 +172,8 @@
 			     "mediatek,mt6577-uart";
 		reg = <0 0x11004000 0 0x400>;
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
+		clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+		clock-names = "baud", "bus";
 		status = "disabled";
 	};
 
@@ -141,7 +182,8 @@
 			     "mediatek,mt6577-uart";
 		reg = <0 0x11005000 0 0x400>;
 		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
+		clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+		clock-names = "baud", "bus";
 		status = "disabled";
 	};
 };
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 01/16] arm: dts: add clock controller device nodes

[John Crispin]

Add clock controller nodes for MT7623, including topckgen, infracfg,
pericfg and apmixedsys. This patch also cleans up two oscillators that
provide clocks for MT7623. Switch the uart clocks to the real ones while
at it.

Signed-off-by: John Crispin <john@phrozen.org>
---
 arch/arm/boot/dts/mt7623.dtsi |   60 ++++++++++++++++++++++++++++++++++-------
 1 file changed, 51 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index fd2b614..592fc0a 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -14,6 +14,8 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt2701-clk.h>
+#include <dt-bindings/reset/mt2701-resets.h>
 #include "skeleton64.dtsi"
 
 / {
@@ -53,16 +55,18 @@
 		#clock-cells = <0>;
 	};
 
-	rtc_clk: dummy32k {
+	rtc32k: oscillator at 1 {
 		compatible = "fixed-clock";
-		clock-frequency = <32000>;
 		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "rtc32k";
 	};
 
-	uart_clk: dummy26m {
+	clk26m: oscillator at 0 {
 		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
 		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
 	};
 
 	timer {
@@ -74,6 +78,32 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
+	topckgen: syscon at 10000000 {
+		compatible = "mediatek,mt7623-topckgen",
+			     "mediatek,mt2701-topckgen",
+			     "syscon";
+		reg = <0 0x10000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	infracfg: syscon at 10001000 {
+		compatible = "mediatek,mt2701-infracfg",
+			     "mediatek,mt7623-infracfg",
+			     "syscon";
+		reg = <0 0x10001000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pericfg: syscon at 10003000 {
+		compatible =  "mediatek,mt7623-pericfg",
+			      "mediatek,mt2701-pericfg",
+			      "syscon";
+		reg = <0 0x10003000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
 	watchdog: watchdog at 10007000 {
 		compatible = "mediatek,mt7623-wdt",
 			     "mediatek,mt6589-wdt";
@@ -85,7 +115,7 @@
 			     "mediatek,mt6577-timer";
 		reg = <0 0x10008000 0 0x80>;
 		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&system_clk>, <&rtc_clk>;
+		clocks = <&system_clk>, <&rtc32k>;
 		clock-names = "system-clk", "rtc-clk";
 	};
 
@@ -98,6 +128,14 @@
 		reg = <0 0x10200100 0 0x1c>;
 	};
 
+	apmixedsys: syscon at 10209000 {
+		compatible = "mediatek,mt2701-apmixedsys",
+			     "mediatek,mt2701-apmixedsys",
+			     "syscon";
+		reg = <0 0x10209000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
 	gic: interrupt-controller at 10211000 {
 		compatible = "arm,cortex-a7-gic";
 		interrupt-controller;
@@ -114,7 +152,8 @@
 			     "mediatek,mt6577-uart";
 		reg = <0 0x11002000 0 0x400>;
 		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
+		clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+		clock-names = "baud", "bus";
 		status = "disabled";
 	};
 
@@ -123,7 +162,8 @@
 			     "mediatek,mt6577-uart";
 		reg = <0 0x11003000 0 0x400>;
 		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
+		clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+		clock-names = "baud", "bus";
 		status = "disabled";
 	};
 
@@ -132,7 +172,8 @@
 			     "mediatek,mt6577-uart";
 		reg = <0 0x11004000 0 0x400>;
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
+		clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+		clock-names = "baud", "bus";
 		status = "disabled";
 	};
 
@@ -141,7 +182,8 @@
 			     "mediatek,mt6577-uart";
 		reg = <0 0x11005000 0 0x400>;
 		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
+		clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+		clock-names = "baud", "bus";
 		status = "disabled";
 	};
 };
-- 
1.7.10.4

[PATCH 02/16] arm: dts: add subsystem clock controller device nodes

[John Crispin]

Add MT7623 subsystem clock controllers for hifsys amd ethsys.

Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
---
 arch/arm/boot/dts/mt7623.dtsi |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 592fc0a..87a55f5 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -186,4 +186,20 @@
 		clock-names = "baud", "bus";
 		status = "disabled";
 	};
+
+	hifsys: syscon@1a000000 {
+		compatible = "mediatek,mt7623-hifsys",
+			     "mediatek,mt2701-hifsys",
+			     "syscon";
+		reg = <0 0x1a000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	ethsys: syscon@1b000000 {
+		compatible = "mediatek,mt7623-ethsys",
+			     "mediatek,mt2701-ethsys",
+			     "syscon";
+		reg = <0 0x1b000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
 };
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 02/16] arm: dts: add subsystem clock controller device nodes

[John Crispin]

Add MT7623 subsystem clock controllers for hifsys amd ethsys.

Signed-off-by: John Crispin <john@phrozen.org>
---
 arch/arm/boot/dts/mt7623.dtsi |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 592fc0a..87a55f5 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -186,4 +186,20 @@
 		clock-names = "baud", "bus";
 		status = "disabled";
 	};
+
+	hifsys: syscon at 1a000000 {
+		compatible = "mediatek,mt7623-hifsys",
+			     "mediatek,mt2701-hifsys",
+			     "syscon";
+		reg = <0 0x1a000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	ethsys: syscon at 1b000000 {
+		compatible = "mediatek,mt7623-ethsys",
+			     "mediatek,mt2701-ethsys",
+			     "syscon";
+		reg = <0 0x1b000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
 };
-- 
1.7.10.4

[PATCH 03/16] arm: dts: add power domain controller device node

[John Crispin]

Add power domain controller node (scpsys) for MT7623.

Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
---
 arch/arm/boot/dts/mt7623.dtsi |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 87a55f5..9252680 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/mt2701-clk.h>
+#include <dt-bindings/power/mt2701-power.h>
 #include <dt-bindings/reset/mt2701-resets.h>
 #include "skeleton64.dtsi"
 
@@ -104,6 +105,19 @@
 		#reset-cells = <1>;
 	};
 
+	scpsys: scpsys@10006000 {
+		compatible = "mediatek,mt7623-scpsys",
+			     "mediatek,mt2701-scpsys",
+			     "syscon";
+		#power-domain-cells = <1>;
+		reg = <0 0x10006000 0 0x1000>;
+		infracfg = <&infracfg>;
+		clocks = <&topckgen CLK_TOP_MM_SEL>,
+			 <&topckgen CLK_TOP_MFG_SEL>,
+			 <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "mm", "mfg", "ethif";
+	};
+
 	watchdog: watchdog@10007000 {
 		compatible = "mediatek,mt7623-wdt",
 			     "mediatek,mt6589-wdt";
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 03/16] arm: dts: add power domain controller device node

[John Crispin]

Add power domain controller node (scpsys) for MT7623.

Signed-off-by: John Crispin <john@phrozen.org>
---
 arch/arm/boot/dts/mt7623.dtsi |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 87a55f5..9252680 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/mt2701-clk.h>
+#include <dt-bindings/power/mt2701-power.h>
 #include <dt-bindings/reset/mt2701-resets.h>
 #include "skeleton64.dtsi"
 
@@ -104,6 +105,19 @@
 		#reset-cells = <1>;
 	};
 
+	scpsys: scpsys at 10006000 {
+		compatible = "mediatek,mt7623-scpsys",
+			     "mediatek,mt2701-scpsys",
+			     "syscon";
+		#power-domain-cells = <1>;
+		reg = <0 0x10006000 0 0x1000>;
+		infracfg = <&infracfg>;
+		clocks = <&topckgen CLK_TOP_MM_SEL>,
+			 <&topckgen CLK_TOP_MFG_SEL>,
+			 <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "mm", "mfg", "ethif";
+	};
+
 	watchdog: watchdog at 10007000 {
 		compatible = "mediatek,mt7623-wdt",
 			     "mediatek,mt6589-wdt";
-- 
1.7.10.4

[PATCH 04/16] arm: dts: add clock-frequency to the a7 timer node to mt7623.dtsi

[John Crispin]

We need to tell the driver what the timers frequency is and that the core
has not be configured by the bootrom. Not doing so makes the unit not
boot.

Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
---
 arch/arm/boot/dts/mt7623.dtsi |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 9252680..cfb6a46 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -77,6 +77,8 @@
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <13000000>;
+		arm,cpu-registers-not-fw-configured;
 	};
 
 	topckgen: syscon@10000000 {
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 04/16] arm: dts: add clock-frequency to the a7 timer node to mt7623.dtsi

[John Crispin]

We need to tell the driver what the timers frequency is and that the core
has not be configured by the bootrom. Not doing so makes the unit not
boot.

Signed-off-by: John Crispin <john@phrozen.org>
---
 arch/arm/boot/dts/mt7623.dtsi |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 9252680..cfb6a46 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -77,6 +77,8 @@
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <13000000>;
+		arm,cpu-registers-not-fw-configured;
 	};
 
 	topckgen: syscon at 10000000 {
-- 
1.7.10.4

[PATCH 05/16] arm: dts: add pinctrl nodes to the mt7623 dtsi file

[John Crispin]

Add pin controller node to the mt7623.dtsi file

Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
---
 arch/arm/boot/dts/mt7623.dtsi |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index cfb6a46..c64117b 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/mt2701-clk.h>
+#include <dt-bindings/pinctrl/mt7623-pinfunc.h>
 #include <dt-bindings/power/mt2701-power.h>
 #include <dt-bindings/reset/mt2701-resets.h>
 #include "skeleton64.dtsi"
@@ -107,6 +108,25 @@
 		#reset-cells = <1>;
 	};
 
+	pio: pinctrl@10005000 {
+		compatible = "mediatek,mt7623-pinctrl";
+		reg = <0 0x1000b000 0 0x1000>;
+		mediatek,pctl-regmap = <&syscfg_pctl_a>;
+		pins-are-numbered;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	syscfg_pctl_a: syscfg@10005000 {
+		compatible = "mediatek,mt7623-pctl-a-syscfg", "syscon";
+		reg = <0 0x10005000 0 0x1000>;
+	};
+
 	scpsys: scpsys@10006000 {
 		compatible = "mediatek,mt7623-scpsys",
 			     "mediatek,mt2701-scpsys",
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 05/16] arm: dts: add pinctrl nodes to the mt7623 dtsi file

[John Crispin]

Add pin controller node to the mt7623.dtsi file

Signed-off-by: John Crispin <john@phrozen.org>
---
 arch/arm/boot/dts/mt7623.dtsi |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index cfb6a46..c64117b 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/mt2701-clk.h>
+#include <dt-bindings/pinctrl/mt7623-pinfunc.h>
 #include <dt-bindings/power/mt2701-power.h>
 #include <dt-bindings/reset/mt2701-resets.h>
 #include "skeleton64.dtsi"
@@ -107,6 +108,25 @@
 		#reset-cells = <1>;
 	};
 
+	pio: pinctrl at 10005000 {
+		compatible = "mediatek,mt7623-pinctrl";
+		reg = <0 0x1000b000 0 0x1000>;
+		mediatek,pctl-regmap = <&syscfg_pctl_a>;
+		pins-are-numbered;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	syscfg_pctl_a: syscfg at 10005000 {
+		compatible = "mediatek,mt7623-pctl-a-syscfg", "syscon";
+		reg = <0 0x10005000 0 0x1000>;
+	};
+
 	scpsys: scpsys at 10006000 {
 		compatible = "mediatek,mt7623-scpsys",
 			     "mediatek,mt2701-scpsys",
-- 
1.7.10.4

[PATCH 06/16] arm: dts: add pmic nodes to the mt7623 dtsi file

[John Crispin]

Add PMIC node to the mt7623.dtsi file.

Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
---
 arch/arm/boot/dts/mt7623.dtsi |   13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index c64117b..6099f05 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -155,6 +155,19 @@
 		clock-names = "system-clk", "rtc-clk";
 	};
 
+	pwrap: pwrap@1000d000 {
+		compatible = "mediatek,mt7623-pwrap",
+			     "mediatek,mt2701-pwrap";
+		reg = <0 0x1000d000 0 0x1000>;
+		reg-names = "pwrap";
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&infracfg MT2701_INFRA_PMIC_WRAP_RST>;
+		reset-names = "pwrap";
+		clocks = <&infracfg CLK_INFRA_PMICSPI>,
+			 <&infracfg CLK_INFRA_PMICWRAP>;
+		clock-names = "spi", "wrap";
+	};
+
 	sysirq: interrupt-controller@10200100 {
 		compatible = "mediatek,mt7623-sysirq",
 			     "mediatek,mt6577-sysirq";
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 06/16] arm: dts: add pmic nodes to the mt7623 dtsi file

[John Crispin]

Add PMIC node to the mt7623.dtsi file.

Signed-off-by: John Crispin <john@phrozen.org>
---
 arch/arm/boot/dts/mt7623.dtsi |   13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index c64117b..6099f05 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -155,6 +155,19 @@
 		clock-names = "system-clk", "rtc-clk";
 	};
 
+	pwrap: pwrap at 1000d000 {
+		compatible = "mediatek,mt7623-pwrap",
+			     "mediatek,mt2701-pwrap";
+		reg = <0 0x1000d000 0 0x1000>;
+		reg-names = "pwrap";
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&infracfg MT2701_INFRA_PMIC_WRAP_RST>;
+		reset-names = "pwrap";
+		clocks = <&infracfg CLK_INFRA_PMICSPI>,
+			 <&infracfg CLK_INFRA_PMICWRAP>;
+		clock-names = "spi", "wrap";
+	};
+
 	sysirq: interrupt-controller at 10200100 {
 		compatible = "mediatek,mt7623-sysirq",
 			     "mediatek,mt6577-sysirq";
-- 
1.7.10.4

[PATCH 07/16] arm: dts: add i2c nodes to the mt7623.dtsi file

[John Crispin]

Add I2C nodes to the mt7623.dtsi file.

Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
---
 arch/arm/boot/dts/mt7623.dtsi |   45 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 6099f05..8ac4569 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -236,6 +236,51 @@
 		status = "disabled";
 	};
 
+	i2c0: i2c@11007000 {
+		compatible = "mediatek,mt7623-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11007000 0 0x70>,
+		      <0 0x11000200 0 0x80>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C0>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@11008000 {
+		compatible = "mediatek,mt7623-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11008000 0 0x70>,
+		      <0 0x11000280 0 0x80>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C1>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@11009000 {
+		compatible = "mediatek,mt7623-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11009000 0 0x70>,
+		      <0 0x11000300 0 0x80>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C2>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	hifsys: syscon@1a000000 {
 		compatible = "mediatek,mt7623-hifsys",
 			     "mediatek,mt2701-hifsys",
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 07/16] arm: dts: add i2c nodes to the mt7623.dtsi file

[John Crispin]

Add I2C nodes to the mt7623.dtsi file.

Signed-off-by: John Crispin <john@phrozen.org>
---
 arch/arm/boot/dts/mt7623.dtsi |   45 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 6099f05..8ac4569 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -236,6 +236,51 @@
 		status = "disabled";
 	};
 
+	i2c0: i2c at 11007000 {
+		compatible = "mediatek,mt7623-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11007000 0 0x70>,
+		      <0 0x11000200 0 0x80>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C0>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c at 11008000 {
+		compatible = "mediatek,mt7623-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11008000 0 0x70>,
+		      <0 0x11000280 0 0x80>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C1>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c at 11009000 {
+		compatible = "mediatek,mt7623-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11009000 0 0x70>,
+		      <0 0x11000300 0 0x80>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C2>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	hifsys: syscon at 1a000000 {
 		compatible = "mediatek,mt7623-hifsys",
 			     "mediatek,mt2701-hifsys",
-- 
1.7.10.4

[PATCH 08/16] arm: dts: add spi nodes to the mt7623.dtsi file

[John Crispin]

Add SPI nodes to the mt7623.dtsi file.

Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
---
 arch/arm/boot/dts/mt7623.dtsi |   12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 8ac4569..c8f38e1 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/mt2701-clk.h>
+#include <dt-bindings/phy/phy.h>
 #include <dt-bindings/pinctrl/mt7623-pinfunc.h>
 #include <dt-bindings/power/mt2701-power.h>
 #include <dt-bindings/reset/mt2701-resets.h>
@@ -281,6 +282,17 @@
 		status = "disabled";
 	};
 
+	spi: spi@1100a000 {
+		compatible = "mediatek,mt7623-spi",
+			     "mediatek,mt6589-spi";
+		reg = <0 0x1100a000 0 0x1000>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_SPI0>;
+		clock-names = "main";
+
+		status = "disabled";
+	};
+
 	hifsys: syscon@1a000000 {
 		compatible = "mediatek,mt7623-hifsys",
 			     "mediatek,mt2701-hifsys",
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 08/16] arm: dts: add spi nodes to the mt7623.dtsi file

[John Crispin]

Add SPI nodes to the mt7623.dtsi file.

Signed-off-by: John Crispin <john@phrozen.org>
---
 arch/arm/boot/dts/mt7623.dtsi |   12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 8ac4569..c8f38e1 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/mt2701-clk.h>
+#include <dt-bindings/phy/phy.h>
 #include <dt-bindings/pinctrl/mt7623-pinfunc.h>
 #include <dt-bindings/power/mt2701-power.h>
 #include <dt-bindings/reset/mt2701-resets.h>
@@ -281,6 +282,17 @@
 		status = "disabled";
 	};
 
+	spi: spi at 1100a000 {
+		compatible = "mediatek,mt7623-spi",
+			     "mediatek,mt6589-spi";
+		reg = <0 0x1100a000 0 0x1000>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_SPI0>;
+		clock-names = "main";
+
+		status = "disabled";
+	};
+
 	hifsys: syscon at 1a000000 {
 		compatible = "mediatek,mt7623-hifsys",
 			     "mediatek,mt2701-hifsys",
-- 
1.7.10.4

[PATCH 09/16] arm: dts: add nand nodes to the mt7623.dtsi file

[John Crispin]

Add NAND/EEC nodes to the mt7623.dtsi file.

Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
---
 arch/arm/boot/dts/mt7623.dtsi |   25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index c8f38e1..240f382 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -293,6 +293,31 @@
 		status = "disabled";
 	};
 
+	nandc: nfi@1100d000 {
+		compatible = "mediatek,mt7623-nfc",
+			     "mediatek,mt2701-nfc";
+		reg = <0 0x1100d000 0 0x1000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+		clocks = <&pericfg CLK_PERI_NFI>,
+			 <&pericfg CLK_PERI_NFI_PAD>;
+		clock-names = "nfi_clk", "pad_clk";
+		status = "disabled";
+		ecc-engine = <&bch>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	bch: ecc@1100e000 {
+		compatible = "mediatek,mt7623-ecc",
+			     "mediatek,mt2701-ecc";
+		reg = <0 0x1100e000 0 0x1000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_NFI_ECC>;
+		clock-names = "nfiecc_clk";
+		status = "disabled";
+	};
+
 	hifsys: syscon@1a000000 {
 		compatible = "mediatek,mt7623-hifsys",
 			     "mediatek,mt2701-hifsys",
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 09/16] arm: dts: add nand nodes to the mt7623.dtsi file

[John Crispin]

Add NAND/EEC nodes to the mt7623.dtsi file.

Signed-off-by: John Crispin <john@phrozen.org>
---
 arch/arm/boot/dts/mt7623.dtsi |   25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index c8f38e1..240f382 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -293,6 +293,31 @@
 		status = "disabled";
 	};
 
+	nandc: nfi at 1100d000 {
+		compatible = "mediatek,mt7623-nfc",
+			     "mediatek,mt2701-nfc";
+		reg = <0 0x1100d000 0 0x1000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+		clocks = <&pericfg CLK_PERI_NFI>,
+			 <&pericfg CLK_PERI_NFI_PAD>;
+		clock-names = "nfi_clk", "pad_clk";
+		status = "disabled";
+		ecc-engine = <&bch>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	bch: ecc at 1100e000 {
+		compatible = "mediatek,mt7623-ecc",
+			     "mediatek,mt2701-ecc";
+		reg = <0 0x1100e000 0 0x1000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_NFI_ECC>;
+		clock-names = "nfiecc_clk";
+		status = "disabled";
+	};
+
 	hifsys: syscon at 1a000000 {
 		compatible = "mediatek,mt7623-hifsys",
 			     "mediatek,mt2701-hifsys",
-- 
1.7.10.4

[PATCH 10/16] arm: dts: add mmc nodes to the mt7623.dtsi file

[John Crispin]

Add e/MMC nodes to the mt7623.dtsi file.

Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
---
 arch/arm/boot/dts/mt7623.dtsi |   22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 240f382..791f3b1 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -318,6 +318,28 @@
 		status = "disabled";
 	};
 
+	mmc0: mmc@11230000 {
+		compatible = "mediatek,mt7623-mmc",
+			     "mediatek,mt8135-mmc";
+		reg = <0 0x11230000 0 0x1000>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_MSDC30_0>,
+			 <&topckgen CLK_TOP_MSDC30_0_SEL>;
+		clock-names = "source", "hclk";
+		status = "disabled";
+	};
+
+	mmc1: mmc@11240000 {
+		compatible = "mediatek,mt7623-mmc",
+			     "mediatek,mt8135-mmc";
+		reg = <0 0x11240000 0 0x1000>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_MSDC30_1>,
+			 <&topckgen CLK_TOP_MSDC30_1_SEL>;
+		clock-names = "source", "hclk";
+		status = "disabled";
+	};
+
 	hifsys: syscon@1a000000 {
 		compatible = "mediatek,mt7623-hifsys",
 			     "mediatek,mt2701-hifsys",
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 10/16] arm: dts: add mmc nodes to the mt7623.dtsi file

[John Crispin]

Add e/MMC nodes to the mt7623.dtsi file.

Signed-off-by: John Crispin <john@phrozen.org>
---
 arch/arm/boot/dts/mt7623.dtsi |   22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 240f382..791f3b1 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -318,6 +318,28 @@
 		status = "disabled";
 	};
 
+	mmc0: mmc at 11230000 {
+		compatible = "mediatek,mt7623-mmc",
+			     "mediatek,mt8135-mmc";
+		reg = <0 0x11230000 0 0x1000>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_MSDC30_0>,
+			 <&topckgen CLK_TOP_MSDC30_0_SEL>;
+		clock-names = "source", "hclk";
+		status = "disabled";
+	};
+
+	mmc1: mmc at 11240000 {
+		compatible = "mediatek,mt7623-mmc",
+			     "mediatek,mt8135-mmc";
+		reg = <0 0x11240000 0 0x1000>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_MSDC30_1>,
+			 <&topckgen CLK_TOP_MSDC30_1_SEL>;
+		clock-names = "source", "hclk";
+		status = "disabled";
+	};
+
 	hifsys: syscon at 1a000000 {
 		compatible = "mediatek,mt7623-hifsys",
 			     "mediatek,mt2701-hifsys",
-- 
1.7.10.4

[PATCH 11/16] arm: dts: add usb nodes to the mt7623.dtsi file

[John Crispin]

Add USB nodes to the mt7623.dtsi file.

Signed-off-by: John Crispin <john@phrozen.org>
---
 arch/arm/boot/dts/mt7623.dtsi |   59 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 791f3b1..540f70c 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -340,6 +340,65 @@
 		status = "disabled";
 	};
 
+	usb1: usb@1a1c0000 {
+		compatible = "mediatek,mt7623-xhci",
+			     "mediatek,mt8173-xhci";
+		reg = <0 0x1a1c0000 0 0x1000>,
+		      <0 0x1a1c4700 0 0x0100>;
+		reg-names = "mac", "ippc";
+		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
+			 <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "sys_ck", "ethif";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+		phys = <&phy_port0 PHY_TYPE_USB3>;
+		status = "disabled";
+	};
+
+	u3phy1: usb-phy@1a1c4000 {
+		compatible = "mediatek,mt7623-u3phy",
+			     "mediatek,mt8173-u3phy";
+		reg = <0 0x1a1c4000 0 0x0700>;
+		clocks = <&clk26m>;
+		clock-names = "u3phya_ref";
+		#phy-cells = <1>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		phy_port0: phy_port0: port@1a1c4800 {
+			reg = <0 0x1a1c4800 0 0x800>;
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	usb2: usb@1a240000 {
+		compatible = "mediatek,mt7623-xhci",
+			     "mediatek,mt8173-xhci";
+		reg = <0 0x1a240000 0 0x1000>,
+		      <0 0x1a244700 0 0x0100>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
+			 <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "sys_ck", "ethif";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+		phys = <&u3phy2 0>;
+		status = "disabled";
+	};
+
+	u3phy2: usb-phy@1a244000 {
+		compatible = "mediatek,mt7623-u3phy",
+			     "mediatek,mt8173-u3phy";
+		reg = <0 0x1a244000 0 0x0700>,
+		      <0 0x1a244800 0 0x0800>;
+		clocks = <&clk26m>;
+		clock-names = "u3phya_ref";
+		#phy-cells = <1>;
+		status = "disabled";
+	};
+
 	hifsys: syscon@1a000000 {
 		compatible = "mediatek,mt7623-hifsys",
 			     "mediatek,mt2701-hifsys",
-- 
1.7.10.4

[PATCH 11/16] arm: dts: add usb nodes to the mt7623.dtsi file

[John Crispin]

Add USB nodes to the mt7623.dtsi file.

Signed-off-by: John Crispin <john@phrozen.org>
---
 arch/arm/boot/dts/mt7623.dtsi |   59 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 791f3b1..540f70c 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -340,6 +340,65 @@
 		status = "disabled";
 	};
 
+	usb1: usb at 1a1c0000 {
+		compatible = "mediatek,mt7623-xhci",
+			     "mediatek,mt8173-xhci";
+		reg = <0 0x1a1c0000 0 0x1000>,
+		      <0 0x1a1c4700 0 0x0100>;
+		reg-names = "mac", "ippc";
+		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
+			 <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "sys_ck", "ethif";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+		phys = <&phy_port0 PHY_TYPE_USB3>;
+		status = "disabled";
+	};
+
+	u3phy1: usb-phy at 1a1c4000 {
+		compatible = "mediatek,mt7623-u3phy",
+			     "mediatek,mt8173-u3phy";
+		reg = <0 0x1a1c4000 0 0x0700>;
+		clocks = <&clk26m>;
+		clock-names = "u3phya_ref";
+		#phy-cells = <1>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		phy_port0: phy_port0: port at 1a1c4800 {
+			reg = <0 0x1a1c4800 0 0x800>;
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	usb2: usb at 1a240000 {
+		compatible = "mediatek,mt7623-xhci",
+			     "mediatek,mt8173-xhci";
+		reg = <0 0x1a240000 0 0x1000>,
+		      <0 0x1a244700 0 0x0100>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
+			 <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "sys_ck", "ethif";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+		phys = <&u3phy2 0>;
+		status = "disabled";
+	};
+
+	u3phy2: usb-phy at 1a244000 {
+		compatible = "mediatek,mt7623-u3phy",
+			     "mediatek,mt8173-u3phy";
+		reg = <0 0x1a244000 0 0x0700>,
+		      <0 0x1a244800 0 0x0800>;
+		clocks = <&clk26m>;
+		clock-names = "u3phya_ref";
+		#phy-cells = <1>;
+		status = "disabled";
+	};
+
 	hifsys: syscon at 1a000000 {
 		compatible = "mediatek,mt7623-hifsys",
 			     "mediatek,mt2701-hifsys",
-- 
1.7.10.4

[PATCH 12/16] arm: dts: add mt7623-mt6323.dtsi file

[John Crispin]

MediaTek produces various PMICs. Which one is used depends on the actual
circuit design. Instead of adding the correct PMIC node to every dts file
we instead add a new intermediate dtsi file which adds the PMIC node.
Additionally we also add the phandles for the regulators to various nodes.

Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
---
 arch/arm/boot/dts/mt7623-evb.dts     |    2 +-
 arch/arm/boot/dts/mt7623-mt6323.dtsi |  273 ++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/mt7623.dtsi        |    8 +-
 3 files changed, 278 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/boot/dts/mt7623-mt6323.dtsi

diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts
index a9ee2d6..58ed038 100644
--- a/arch/arm/boot/dts/mt7623-evb.dts
+++ b/arch/arm/boot/dts/mt7623-evb.dts
@@ -13,7 +13,7 @@
  */
 
 /dts-v1/;
-#include "mt7623.dtsi"
+#include "mt7623-mt6323.dtsi"
 
 / {
 	model = "MediaTek MT7623 evaluation board";
diff --git a/arch/arm/boot/dts/mt7623-mt6323.dtsi b/arch/arm/boot/dts/mt7623-mt6323.dtsi
new file mode 100644
index 0000000..88ab818
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623-mt6323.dtsi
@@ -0,0 +1,273 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "mt7623.dtsi"
+
+&cpu0 {
+	proc-supply = <&mt6323_vproc_reg>;
+};
+
+&cpu1 {
+	proc-supply = <&mt6323_vproc_reg>;
+};
+
+&cpu2 {
+	proc-supply = <&mt6323_vproc_reg>;
+};
+
+&cpu3 {
+	proc-supply = <&mt6323_vproc_reg>;
+};
+
+&pwrap {
+	pmic: mt6323 {
+		compatible = "mediatek,mt6323";
+		interrupt-parent = <&pio>;
+		interrupts = <150 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		mt6323regulator: mt6323regulator{
+			compatible = "mediatek,mt6323-regulator";
+
+			mt6323_vproc_reg: buck_vproc{
+				regulator-name = "vproc";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vsys_reg: buck_vsys{
+				regulator-name = "vsys";
+				regulator-min-microvolt = <1400000>;
+				regulator-max-microvolt = <2987500>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vpa_reg: buck_vpa{
+				regulator-name = "vpa";
+				regulator-min-microvolt = < 500000>;
+				regulator-max-microvolt = <3650000>;
+			};
+
+			mt6323_vtcxo_reg: ldo_vtcxo{
+				regulator-name = "vtcxo";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <90>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcn28_reg: ldo_vcn28{
+				regulator-name = "vcn28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <185>;
+			};
+
+			mt6323_vcn33_bt_reg: ldo_vcn33_bt{
+				regulator-name = "vcn33_bt";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-enable-ramp-delay = <185>;
+			};
+
+			mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{
+				regulator-name = "vcn33_wifi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-enable-ramp-delay = <185>;
+			};
+
+			mt6323_va_reg: ldo_va{
+				regulator-name = "va";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcama_reg: ldo_vcama{
+				regulator-name = "vcama";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vio28_reg: ldo_vio28{
+				regulator-name = "vio28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vusb_reg: ldo_vusb{
+				regulator-name = "vusb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-boot-on;
+			};
+
+			mt6323_vmc_reg: ldo_vmc{
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+				regulator-boot-on;
+			};
+
+			mt6323_vmch_reg: ldo_vmch{
+				regulator-name = "vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+				regulator-boot-on;
+			};
+
+			mt6323_vemc3v3_reg: ldo_vemc3v3{
+				regulator-name = "vemc3v3";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+				regulator-boot-on;
+			};
+
+			mt6323_vgp1_reg: ldo_vgp1{
+				regulator-name = "vgp1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vgp2_reg: ldo_vgp2{
+				regulator-name = "vgp2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vgp3_reg: ldo_vgp3{
+				regulator-name = "vgp3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vcn18_reg: ldo_vcn18{
+				regulator-name = "vcn18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vsim1_reg: ldo_vsim1{
+				regulator-name = "vsim1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vsim2_reg: ldo_vsim2{
+				regulator-name = "vsim2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vrtc_reg: ldo_vrtc{
+				regulator-name = "vrtc";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcamaf_reg: ldo_vcamaf{
+				regulator-name = "vcamaf";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vibr_reg: ldo_vibr{
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+			};
+
+			mt6323_vrf18_reg: ldo_vrf18{
+				regulator-name = "vrf18";
+				regulator-min-microvolt = <1825000>;
+				regulator-max-microvolt = <1825000>;
+				regulator-enable-ramp-delay = <187>;
+			};
+
+			mt6323_vm_reg: ldo_vm{
+				regulator-name = "vm";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vio18_reg: ldo_vio18{
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcamd_reg: ldo_vcamd{
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vcamio_reg: ldo_vcamio{
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+		};
+	};
+};
+
+&usb1 {
+	vusb33-supply = <&mt6323_vusb_reg>;
+};
+
+&mmc0 {
+	vmmc-supply = <&mt6323_vemc3v3_reg>;
+	vqmmc-supply = <&mt6323_vio18_reg>;
+};
+
+&mmc1 {
+	vmmc-supply = <&mt6323_vmch_reg>;
+	vqmmc-supply = <&mt6323_vmc_reg>;
+};
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 540f70c..b256ff51 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -30,22 +30,22 @@
 		#size-cells = <0>;
 		enable-method = "mediatek,mt6589-smp";
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x0>;
 		};
-		cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x1>;
 		};
-		cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x2>;
 		};
-		cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x3>;
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 12/16] arm: dts: add mt7623-mt6323.dtsi file

[John Crispin]

MediaTek produces various PMICs. Which one is used depends on the actual
circuit design. Instead of adding the correct PMIC node to every dts file
we instead add a new intermediate dtsi file which adds the PMIC node.
Additionally we also add the phandles for the regulators to various nodes.

Signed-off-by: John Crispin <john@phrozen.org>
---
 arch/arm/boot/dts/mt7623-evb.dts     |    2 +-
 arch/arm/boot/dts/mt7623-mt6323.dtsi |  273 ++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/mt7623.dtsi        |    8 +-
 3 files changed, 278 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/boot/dts/mt7623-mt6323.dtsi

diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts
index a9ee2d6..58ed038 100644
--- a/arch/arm/boot/dts/mt7623-evb.dts
+++ b/arch/arm/boot/dts/mt7623-evb.dts
@@ -13,7 +13,7 @@
  */
 
 /dts-v1/;
-#include "mt7623.dtsi"
+#include "mt7623-mt6323.dtsi"
 
 / {
 	model = "MediaTek MT7623 evaluation board";
diff --git a/arch/arm/boot/dts/mt7623-mt6323.dtsi b/arch/arm/boot/dts/mt7623-mt6323.dtsi
new file mode 100644
index 0000000..88ab818
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623-mt6323.dtsi
@@ -0,0 +1,273 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: John Crispin <john@phrozen.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "mt7623.dtsi"
+
+&cpu0 {
+	proc-supply = <&mt6323_vproc_reg>;
+};
+
+&cpu1 {
+	proc-supply = <&mt6323_vproc_reg>;
+};
+
+&cpu2 {
+	proc-supply = <&mt6323_vproc_reg>;
+};
+
+&cpu3 {
+	proc-supply = <&mt6323_vproc_reg>;
+};
+
+&pwrap {
+	pmic: mt6323 {
+		compatible = "mediatek,mt6323";
+		interrupt-parent = <&pio>;
+		interrupts = <150 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		mt6323regulator: mt6323regulator{
+			compatible = "mediatek,mt6323-regulator";
+
+			mt6323_vproc_reg: buck_vproc{
+				regulator-name = "vproc";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vsys_reg: buck_vsys{
+				regulator-name = "vsys";
+				regulator-min-microvolt = <1400000>;
+				regulator-max-microvolt = <2987500>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vpa_reg: buck_vpa{
+				regulator-name = "vpa";
+				regulator-min-microvolt = < 500000>;
+				regulator-max-microvolt = <3650000>;
+			};
+
+			mt6323_vtcxo_reg: ldo_vtcxo{
+				regulator-name = "vtcxo";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <90>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcn28_reg: ldo_vcn28{
+				regulator-name = "vcn28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <185>;
+			};
+
+			mt6323_vcn33_bt_reg: ldo_vcn33_bt{
+				regulator-name = "vcn33_bt";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-enable-ramp-delay = <185>;
+			};
+
+			mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{
+				regulator-name = "vcn33_wifi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-enable-ramp-delay = <185>;
+			};
+
+			mt6323_va_reg: ldo_va{
+				regulator-name = "va";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcama_reg: ldo_vcama{
+				regulator-name = "vcama";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vio28_reg: ldo_vio28{
+				regulator-name = "vio28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vusb_reg: ldo_vusb{
+				regulator-name = "vusb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-boot-on;
+			};
+
+			mt6323_vmc_reg: ldo_vmc{
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+				regulator-boot-on;
+			};
+
+			mt6323_vmch_reg: ldo_vmch{
+				regulator-name = "vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+				regulator-boot-on;
+			};
+
+			mt6323_vemc3v3_reg: ldo_vemc3v3{
+				regulator-name = "vemc3v3";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+				regulator-boot-on;
+			};
+
+			mt6323_vgp1_reg: ldo_vgp1{
+				regulator-name = "vgp1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vgp2_reg: ldo_vgp2{
+				regulator-name = "vgp2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vgp3_reg: ldo_vgp3{
+				regulator-name = "vgp3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vcn18_reg: ldo_vcn18{
+				regulator-name = "vcn18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vsim1_reg: ldo_vsim1{
+				regulator-name = "vsim1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vsim2_reg: ldo_vsim2{
+				regulator-name = "vsim2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vrtc_reg: ldo_vrtc{
+				regulator-name = "vrtc";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcamaf_reg: ldo_vcamaf{
+				regulator-name = "vcamaf";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vibr_reg: ldo_vibr{
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+			};
+
+			mt6323_vrf18_reg: ldo_vrf18{
+				regulator-name = "vrf18";
+				regulator-min-microvolt = <1825000>;
+				regulator-max-microvolt = <1825000>;
+				regulator-enable-ramp-delay = <187>;
+			};
+
+			mt6323_vm_reg: ldo_vm{
+				regulator-name = "vm";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vio18_reg: ldo_vio18{
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcamd_reg: ldo_vcamd{
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vcamio_reg: ldo_vcamio{
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+		};
+	};
+};
+
+&usb1 {
+	vusb33-supply = <&mt6323_vusb_reg>;
+};
+
+&mmc0 {
+	vmmc-supply = <&mt6323_vemc3v3_reg>;
+	vqmmc-supply = <&mt6323_vio18_reg>;
+};
+
+&mmc1 {
+	vmmc-supply = <&mt6323_vmch_reg>;
+	vqmmc-supply = <&mt6323_vmc_reg>;
+};
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 540f70c..b256ff51 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -30,22 +30,22 @@
 		#size-cells = <0>;
 		enable-method = "mediatek,mt6589-smp";
 
-		cpu at 0 {
+		cpu0: cpu at 0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x0>;
 		};
-		cpu at 1 {
+		cpu1: cpu at 1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x1>;
 		};
-		cpu at 2 {
+		cpu2: cpu at 2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x2>;
 		};
-		cpu at 3 {
+		cpu3: cpu at 3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x3>;
-- 
1.7.10.4

[PATCH 13/16] arm: dts: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi

[John Crispin]

There are 2 versions of the SoC. MT7623N is almost identical to MT7623A
but has some additional multimedia features. The reference boards are
available as NAND or MMC and might have a different ethernet setup. In
order to reduce the duplication of devicetree code we add an intermediate
dtsi file for these reference boards. Additionally MTK/WCN pointed out,
that the EVB is yet another board and the board in question is infact the
RFB. Take this into account while renaming the files.

 Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
---
 Documentation/devicetree/bindings/arm/mediatek.txt |    4 +--
 arch/arm/boot/dts/Makefile                         |    2 +-
 arch/arm/boot/dts/mt7623-evb.dts                   |   33 --------------------
 arch/arm/boot/dts/mt7623n-rfb-nand.dts             |   21 +++++++++++++
 arch/arm/boot/dts/mt7623n-rfb.dtsi                 |   29 +++++++++++++++++
 5 files changed, 53 insertions(+), 36 deletions(-)
 delete mode 100644 arch/arm/boot/dts/mt7623-evb.dts
 create mode 100644 arch/arm/boot/dts/mt7623n-rfb-nand.dts
 create mode 100644 arch/arm/boot/dts/mt7623n-rfb.dtsi

diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index c860b24..71149cb 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -38,9 +38,9 @@ Supported boards:
 - Evaluation board for MT6795(Helio X10):
     Required root node properties:
       - compatible = "mediatek,mt6795-evb", "mediatek,mt6795";
-- Evaluation board for MT7623:
+- Reference  board for MT7623N with NAND:
     Required root node properties:
-      - compatible = "mediatek,mt7623-evb", "mediatek,mt7623";
+      - compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
 - MTK mt8127 tablet moose EVB:
     Required root node properties:
       - compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index cccdbcb..9735c2c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -976,7 +976,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
 	mt6580-evbp1.dtb \
 	mt6589-aquaris5.dtb \
 	mt6592-evb.dtb \
-	mt7623-evb.dtb \
+	mt7623n-rfb-nand.dtb \
 	mt8127-moose.dtb \
 	mt8135-evbp1.dtb
 dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts
deleted file mode 100644
index 58ed038..0000000
--- a/arch/arm/boot/dts/mt7623-evb.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright (c) 2016 MediaTek Inc.
- * Author: John Crispin <blogic-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-#include "mt7623-mt6323.dtsi"
-
-/ {
-	model = "MediaTek MT7623 evaluation board";
-	compatible = "mediatek,mt7623-evb", "mediatek,mt7623";
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	memory {
-		reg = <0 0x80000000 0 0x40000000>;
-	};
-};
-
-&uart2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
new file mode 100644
index 0000000..436d51c
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: John Crispin <blogic-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt7623n-rfb.dtsi"
+
+/ {
+	model = "MediaTek MT7623N NAND reference board";
+	compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
+};
diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
new file mode 100644
index 0000000..d46390e
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: John Crispin <blogic-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "mt7623-mt6323.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory {
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 13/16] arm: dts: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi

[John Crispin]

There are 2 versions of the SoC. MT7623N is almost identical to MT7623A
but has some additional multimedia features. The reference boards are
available as NAND or MMC and might have a different ethernet setup. In
order to reduce the duplication of devicetree code we add an intermediate
dtsi file for these reference boards. Additionally MTK/WCN pointed out,
that the EVB is yet another board and the board in question is infact the
RFB. Take this into account while renaming the files.

 Signed-off-by: John Crispin <john@phrozen.org>
---
 Documentation/devicetree/bindings/arm/mediatek.txt |    4 +--
 arch/arm/boot/dts/Makefile                         |    2 +-
 arch/arm/boot/dts/mt7623-evb.dts                   |   33 --------------------
 arch/arm/boot/dts/mt7623n-rfb-nand.dts             |   21 +++++++++++++
 arch/arm/boot/dts/mt7623n-rfb.dtsi                 |   29 +++++++++++++++++
 5 files changed, 53 insertions(+), 36 deletions(-)
 delete mode 100644 arch/arm/boot/dts/mt7623-evb.dts
 create mode 100644 arch/arm/boot/dts/mt7623n-rfb-nand.dts
 create mode 100644 arch/arm/boot/dts/mt7623n-rfb.dtsi

diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index c860b24..71149cb 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -38,9 +38,9 @@ Supported boards:
 - Evaluation board for MT6795(Helio X10):
     Required root node properties:
       - compatible = "mediatek,mt6795-evb", "mediatek,mt6795";
-- Evaluation board for MT7623:
+- Reference  board for MT7623N with NAND:
     Required root node properties:
-      - compatible = "mediatek,mt7623-evb", "mediatek,mt7623";
+      - compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
 - MTK mt8127 tablet moose EVB:
     Required root node properties:
       - compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index cccdbcb..9735c2c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -976,7 +976,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
 	mt6580-evbp1.dtb \
 	mt6589-aquaris5.dtb \
 	mt6592-evb.dtb \
-	mt7623-evb.dtb \
+	mt7623n-rfb-nand.dtb \
 	mt8127-moose.dtb \
 	mt8135-evbp1.dtb
 dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts
deleted file mode 100644
index 58ed038..0000000
--- a/arch/arm/boot/dts/mt7623-evb.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright (c) 2016 MediaTek Inc.
- * Author: John Crispin <blogic@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-#include "mt7623-mt6323.dtsi"
-
-/ {
-	model = "MediaTek MT7623 evaluation board";
-	compatible = "mediatek,mt7623-evb", "mediatek,mt7623";
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	memory {
-		reg = <0 0x80000000 0 0x40000000>;
-	};
-};
-
-&uart2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
new file mode 100644
index 0000000..436d51c
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: John Crispin <blogic@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt7623n-rfb.dtsi"
+
+/ {
+	model = "MediaTek MT7623N NAND reference board";
+	compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
+};
diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
new file mode 100644
index 0000000..d46390e
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: John Crispin <blogic@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "mt7623-mt6323.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory {
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
-- 
1.7.10.4

[PATCH 14/16] arm: dts: cleanup the mt7623n rfb uart nodes

[John Crispin]

This patch does a cleanup of the uart nodes in the dts file of the RFB. It
adds aliases, enables 2 more uarts and explicitly sets the uart mode of the
console.

Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
---
 arch/arm/boot/dts/mt7623n-rfb.dtsi |   16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
index d46390e..df9e564 100644
--- a/arch/arm/boot/dts/mt7623n-rfb.dtsi
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -16,12 +16,26 @@
 
 / {
 	chosen {
-		stdout-path = &uart2;
+		stdout-path = "serial2:115200n8";
 	};
 
 	memory {
 		reg = <0 0x80000000 0 0x40000000>;
 	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
 };
 
 &uart2 {
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 14/16] arm: dts: cleanup the mt7623n rfb uart nodes

[John Crispin]

This patch does a cleanup of the uart nodes in the dts file of the RFB. It
adds aliases, enables 2 more uarts and explicitly sets the uart mode of the
console.

Signed-off-by: John Crispin <john@phrozen.org>
---
 arch/arm/boot/dts/mt7623n-rfb.dtsi |   16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
index d46390e..df9e564 100644
--- a/arch/arm/boot/dts/mt7623n-rfb.dtsi
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -16,12 +16,26 @@
 
 / {
 	chosen {
-		stdout-path = &uart2;
+		stdout-path = "serial2:115200n8";
 	};
 
 	memory {
 		reg = <0 0x80000000 0 0x40000000>;
 	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
 };
 
 &uart2 {
-- 
1.7.10.4

[PATCH 15/16] arm: dts: enable the usb device on the mt7623n rfb

[John Crispin]

All versions of the mt7623n RFB have an USB port so enable the device.
There is a gpio that gets used to power up the port supply. Add support
for this gpio using the fixed-regulator driver.

Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
---
 arch/arm/boot/dts/mt7623.dtsi      |    1 +
 arch/arm/boot/dts/mt7623n-rfb.dtsi |   18 ++++++++++++++++++
 2 files changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index b256ff51..388ba7f 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/mt2701-clk.h>
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/pinctrl/mt7623-pinfunc.h>
 #include <dt-bindings/power/mt2701-power.h>
diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
index df9e564..777334a 100644
--- a/arch/arm/boot/dts/mt7623n-rfb.dtsi
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -28,6 +28,15 @@
 		serial1 = &uart1;
 		serial2 = &uart2;
 	};
+
+	usb_p1_vbus: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 135 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &uart0 {
@@ -41,3 +50,12 @@
 &uart2 {
 	status = "okay";
 };
+
+&usb1 {
+	vbus-supply = <&usb_p1_vbus>;
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 15/16] arm: dts: enable the usb device on the mt7623n rfb

[John Crispin]

All versions of the mt7623n RFB have an USB port so enable the device.
There is a gpio that gets used to power up the port supply. Add support
for this gpio using the fixed-regulator driver.

Signed-off-by: John Crispin <john@phrozen.org>
---
 arch/arm/boot/dts/mt7623.dtsi      |    1 +
 arch/arm/boot/dts/mt7623n-rfb.dtsi |   18 ++++++++++++++++++
 2 files changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index b256ff51..388ba7f 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/mt2701-clk.h>
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/pinctrl/mt7623-pinfunc.h>
 #include <dt-bindings/power/mt2701-power.h>
diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
index df9e564..777334a 100644
--- a/arch/arm/boot/dts/mt7623n-rfb.dtsi
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -28,6 +28,15 @@
 		serial1 = &uart1;
 		serial2 = &uart2;
 	};
+
+	usb_p1_vbus: regulator at 0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 135 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &uart0 {
@@ -41,3 +50,12 @@
 &uart2 {
 	status = "okay";
 };
+
+&usb1 {
+	vbus-supply = <&usb_p1_vbus>;
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
-- 
1.7.10.4

[PATCH 16/16] arm: dts: enable the nand device on the mt7623n nand rfb

[John Crispin]

Enable the nand device and setup pinmux on the mt7632m rfb with nand
support.

Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
---
 arch/arm/boot/dts/mt7623n-rfb-nand.dts |   88 ++++++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
index 436d51c..9356095 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-nand.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
@@ -19,3 +19,91 @@
 	model = "MediaTek MT7623N NAND reference board";
 	compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
 };
+
+&pio {
+	nand_pins_default: nanddefault {
+		pins_dat {
+			pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>,
+				 <MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>,
+				 <MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>,
+				 <MT7623_PIN_118_MSDC0_DAT3_FUNC_NLD3>,
+				 <MT7623_PIN_121_MSDC0_DAT0_FUNC_NLD0>,
+				 <MT7623_PIN_120_MSDC0_DAT1_FUNC_NLD1>,
+				 <MT7623_PIN_113_MSDC0_DAT5_FUNC_NLD5>,
+				 <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>,
+				 <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up;
+		};
+
+		pins_we {
+			pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_ale {
+			pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+};
+
+&nandc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins_default>;
+	nand@0 {
+		reg = <0>;
+		spare_per_sector = <64>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <12>;
+		nand-ecc-step-size = <1024>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "preloader";
+				reg = <0x0 0x40000>;
+			};
+
+			partition@40000 {
+				label = "uboot";
+				reg = <0x40000 0x80000>;
+			};
+
+			partition@C0000 {
+				label = "uboot-env";
+				reg = <0xC0000 0x40000>;
+			};
+
+			partition@140000 {
+				label = "bootimg";
+				reg = <0x140000 0x2000000>;
+			};
+
+			partition@2140000 {
+				label = "recovery";
+				reg = <0x2140000 0x2000000>;
+			};
+
+			partition@4140000 {
+				label = "rootfs";
+				reg = <0x4140000 0x1000000>;
+			};
+
+			partition@5140000 {
+				label = "usrdata";
+				reg = <0x5140000 0x1000000>;
+			};
+		};
+	};
+};
+
+&bch {
+	status = "okay";
+};
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 16/16] arm: dts: enable the nand device on the mt7623n nand rfb

[John Crispin]

Enable the nand device and setup pinmux on the mt7632m rfb with nand
support.

Signed-off-by: John Crispin <john@phrozen.org>
---
 arch/arm/boot/dts/mt7623n-rfb-nand.dts |   88 ++++++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
index 436d51c..9356095 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-nand.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
@@ -19,3 +19,91 @@
 	model = "MediaTek MT7623N NAND reference board";
 	compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
 };
+
+&pio {
+	nand_pins_default: nanddefault {
+		pins_dat {
+			pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>,
+				 <MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>,
+				 <MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>,
+				 <MT7623_PIN_118_MSDC0_DAT3_FUNC_NLD3>,
+				 <MT7623_PIN_121_MSDC0_DAT0_FUNC_NLD0>,
+				 <MT7623_PIN_120_MSDC0_DAT1_FUNC_NLD1>,
+				 <MT7623_PIN_113_MSDC0_DAT5_FUNC_NLD5>,
+				 <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>,
+				 <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up;
+		};
+
+		pins_we {
+			pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_ale {
+			pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+};
+
+&nandc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins_default>;
+	nand at 0 {
+		reg = <0>;
+		spare_per_sector = <64>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <12>;
+		nand-ecc-step-size = <1024>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition at 0 {
+				label = "preloader";
+				reg = <0x0 0x40000>;
+			};
+
+			partition at 40000 {
+				label = "uboot";
+				reg = <0x40000 0x80000>;
+			};
+
+			partition at C0000 {
+				label = "uboot-env";
+				reg = <0xC0000 0x40000>;
+			};
+
+			partition at 140000 {
+				label = "bootimg";
+				reg = <0x140000 0x2000000>;
+			};
+
+			partition at 2140000 {
+				label = "recovery";
+				reg = <0x2140000 0x2000000>;
+			};
+
+			partition at 4140000 {
+				label = "rootfs";
+				reg = <0x4140000 0x1000000>;
+			};
+
+			partition at 5140000 {
+				label = "usrdata";
+				reg = <0x5140000 0x1000000>;
+			};
+		};
+	};
+};
+
+&bch {
+	status = "okay";
+};
-- 
1.7.10.4

Re: [PATCH 00/16] arm: dts: extend mt7623 support

[John Crispin]

On 23/01/2017 12:29, John Crispin wrote:
> This series extends the dts files used for booting mt7623 base boards.
> Since support for mt7623 was added around v4.6, many new drivers have
> been accepted upstream. The contained patches add several of these to
> the devicetree.
> 
> Additionally the series does a bit of refactoring. MTK/WCN pointed out
> that the evaluation board is infact a reference design and asked the the
> evb files be renamed to rfb.
> 
> As with all of the current ARM bases MTK silicon, these boards also have
> a PMIC. Instead of adding the nodes to all of the dts files, we add an
> intermediate dtsi file that contains the required nodes. This allows us
> to reduce the size of the top most dts files.
> 
> The RFB comes in various versions and asiarf has even done a crowdfunder
> to sell them. We should try to reduce the duplication. This series adds
> a common dtsi file for these boards. This results in the topmost dts files
> only needing to specify the compatible string, MTD nodes and ethernet setup.
> 

Hi,

i have a 2nd series in the making which makes the following things work,
just in case anyone else is also working on this, let me know so that we
don't duplicate any of the work.

* pcie
* cpufreq
* mt7623a RFB
* ethernet
* spi-nor
* PWM

	John


> John Crispin (16):
>   arm: dts: add clock controller device nodes
>   arm: dts: add subsystem clock controller device nodes
>   arm: dts: add power domain controller device node
>   arm: dts: add clock-frequency to the a7 timer node to mt7623.dtsi
>   arm: dts: add pinctrl nodes to the mt7623 dtsi file
>   arm: dts: add pmic nodes to the mt7623 dtsi file
>   arm: dts: add i2c nodes to the mt7623.dtsi file
>   arm: dts: add spi nodes to the mt7623.dtsi file
>   arm: dts: add nand nodes to the mt7623.dtsi file
>   arm: dts: add mmc nodes to the mt7623.dtsi file
>   arm: dts: add usb nodes to the mt7623.dtsi file
>   arm: dts: add mt7623-mt6323.dtsi file
>   arm: dts: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi
>   arm: dts: cleanup the mt7623n rfb uart nodes
>   arm: dts: enable the usb device on the mt7623n rfb
>   arm: dts: enable the nand device on the mt7623n nand rfb
> 
>  Documentation/devicetree/bindings/arm/mediatek.txt |    4 +-
>  arch/arm/boot/dts/Makefile                         |    2 +-
>  arch/arm/boot/dts/mt7623-evb.dts                   |   33 ---
>  arch/arm/boot/dts/mt7623-mt6323.dtsi               |  273 ++++++++++++++++++
>  arch/arm/boot/dts/mt7623.dtsi                      |  297 +++++++++++++++++++-
>  arch/arm/boot/dts/mt7623n-rfb-nand.dts             |  109 +++++++
>  arch/arm/boot/dts/mt7623n-rfb.dtsi                 |   61 ++++
>  7 files changed, 730 insertions(+), 49 deletions(-)
>  delete mode 100644 arch/arm/boot/dts/mt7623-evb.dts
>  create mode 100644 arch/arm/boot/dts/mt7623-mt6323.dtsi
>  create mode 100644 arch/arm/boot/dts/mt7623n-rfb-nand.dts
>  create mode 100644 arch/arm/boot/dts/mt7623n-rfb.dtsi
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 00/16] arm: dts: extend mt7623 support

[John Crispin]

On 23/01/2017 12:29, John Crispin wrote:
> This series extends the dts files used for booting mt7623 base boards.
> Since support for mt7623 was added around v4.6, many new drivers have
> been accepted upstream. The contained patches add several of these to
> the devicetree.
> 
> Additionally the series does a bit of refactoring. MTK/WCN pointed out
> that the evaluation board is infact a reference design and asked the the
> evb files be renamed to rfb.
> 
> As with all of the current ARM bases MTK silicon, these boards also have
> a PMIC. Instead of adding the nodes to all of the dts files, we add an
> intermediate dtsi file that contains the required nodes. This allows us
> to reduce the size of the top most dts files.
> 
> The RFB comes in various versions and asiarf has even done a crowdfunder
> to sell them. We should try to reduce the duplication. This series adds
> a common dtsi file for these boards. This results in the topmost dts files
> only needing to specify the compatible string, MTD nodes and ethernet setup.
> 

Hi,

i have a 2nd series in the making which makes the following things work,
just in case anyone else is also working on this, let me know so that we
don't duplicate any of the work.

* pcie
* cpufreq
* mt7623a RFB
* ethernet
* spi-nor
* PWM

	John


> John Crispin (16):
>   arm: dts: add clock controller device nodes
>   arm: dts: add subsystem clock controller device nodes
>   arm: dts: add power domain controller device node
>   arm: dts: add clock-frequency to the a7 timer node to mt7623.dtsi
>   arm: dts: add pinctrl nodes to the mt7623 dtsi file
>   arm: dts: add pmic nodes to the mt7623 dtsi file
>   arm: dts: add i2c nodes to the mt7623.dtsi file
>   arm: dts: add spi nodes to the mt7623.dtsi file
>   arm: dts: add nand nodes to the mt7623.dtsi file
>   arm: dts: add mmc nodes to the mt7623.dtsi file
>   arm: dts: add usb nodes to the mt7623.dtsi file
>   arm: dts: add mt7623-mt6323.dtsi file
>   arm: dts: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi
>   arm: dts: cleanup the mt7623n rfb uart nodes
>   arm: dts: enable the usb device on the mt7623n rfb
>   arm: dts: enable the nand device on the mt7623n nand rfb
> 
>  Documentation/devicetree/bindings/arm/mediatek.txt |    4 +-
>  arch/arm/boot/dts/Makefile                         |    2 +-
>  arch/arm/boot/dts/mt7623-evb.dts                   |   33 ---
>  arch/arm/boot/dts/mt7623-mt6323.dtsi               |  273 ++++++++++++++++++
>  arch/arm/boot/dts/mt7623.dtsi                      |  297 +++++++++++++++++++-
>  arch/arm/boot/dts/mt7623n-rfb-nand.dts             |  109 +++++++
>  arch/arm/boot/dts/mt7623n-rfb.dtsi                 |   61 ++++
>  7 files changed, 730 insertions(+), 49 deletions(-)
>  delete mode 100644 arch/arm/boot/dts/mt7623-evb.dts
>  create mode 100644 arch/arm/boot/dts/mt7623-mt6323.dtsi
>  create mode 100644 arch/arm/boot/dts/mt7623n-rfb-nand.dts
>  create mode 100644 arch/arm/boot/dts/mt7623n-rfb.dtsi
> 

Re: [PATCH 08/16] arm: dts: add spi nodes to the mt7623.dtsi file

[Matthias Brugger]

On 01/23/2017 12:29 PM, John Crispin wrote:
> Add SPI nodes to the mt7623.dtsi file.
>
> Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
> ---
>  arch/arm/boot/dts/mt7623.dtsi |   12 ++++++++++++
>  1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> index 8ac4569..c8f38e1 100644
> --- a/arch/arm/boot/dts/mt7623.dtsi
> +++ b/arch/arm/boot/dts/mt7623.dtsi
> @@ -15,6 +15,7 @@
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/clock/mt2701-clk.h>
> +#include <dt-bindings/phy/phy.h>

Why do you need this include here?

Regards,
Matthias

>  #include <dt-bindings/pinctrl/mt7623-pinfunc.h>
>  #include <dt-bindings/power/mt2701-power.h>
>  #include <dt-bindings/reset/mt2701-resets.h>
> @@ -281,6 +282,17 @@
>  		status = "disabled";
>  	};
>
> +	spi: spi@1100a000 {
> +		compatible = "mediatek,mt7623-spi",
> +			     "mediatek,mt6589-spi";
> +		reg = <0 0x1100a000 0 0x1000>;
> +		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
> +		clocks = <&pericfg CLK_PERI_SPI0>;
> +		clock-names = "main";
> +
> +		status = "disabled";
> +	};
> +
>  	hifsys: syscon@1a000000 {
>  		compatible = "mediatek,mt7623-hifsys",
>  			     "mediatek,mt2701-hifsys",
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 08/16] arm: dts: add spi nodes to the mt7623.dtsi file

[Matthias Brugger]

On 01/23/2017 12:29 PM, John Crispin wrote:
> Add SPI nodes to the mt7623.dtsi file.
>
> Signed-off-by: John Crispin <john@phrozen.org>
> ---
>  arch/arm/boot/dts/mt7623.dtsi |   12 ++++++++++++
>  1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> index 8ac4569..c8f38e1 100644
> --- a/arch/arm/boot/dts/mt7623.dtsi
> +++ b/arch/arm/boot/dts/mt7623.dtsi
> @@ -15,6 +15,7 @@
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/clock/mt2701-clk.h>
> +#include <dt-bindings/phy/phy.h>

Why do you need this include here?

Regards,
Matthias

>  #include <dt-bindings/pinctrl/mt7623-pinfunc.h>
>  #include <dt-bindings/power/mt2701-power.h>
>  #include <dt-bindings/reset/mt2701-resets.h>
> @@ -281,6 +282,17 @@
>  		status = "disabled";
>  	};
>
> +	spi: spi at 1100a000 {
> +		compatible = "mediatek,mt7623-spi",
> +			     "mediatek,mt6589-spi";
> +		reg = <0 0x1100a000 0 0x1000>;
> +		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
> +		clocks = <&pericfg CLK_PERI_SPI0>;
> +		clock-names = "main";
> +
> +		status = "disabled";
> +	};
> +
>  	hifsys: syscon at 1a000000 {
>  		compatible = "mediatek,mt7623-hifsys",
>  			     "mediatek,mt2701-hifsys",
>

Re: [PATCH 08/16] arm: dts: add spi nodes to the mt7623.dtsi file

[John Crispin]

On 24/01/2017 23:39, Matthias Brugger wrote:
> 
> 
> On 01/23/2017 12:29 PM, John Crispin wrote:
>> Add SPI nodes to the mt7623.dtsi file.
>>
>> Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
>> ---
>>  arch/arm/boot/dts/mt7623.dtsi |   12 ++++++++++++
>>  1 file changed, 12 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/mt7623.dtsi
>> b/arch/arm/boot/dts/mt7623.dtsi
>> index 8ac4569..c8f38e1 100644
>> --- a/arch/arm/boot/dts/mt7623.dtsi
>> +++ b/arch/arm/boot/dts/mt7623.dtsi
>> @@ -15,6 +15,7 @@
>>  #include <dt-bindings/interrupt-controller/irq.h>
>>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>>  #include <dt-bindings/clock/mt2701-clk.h>
>> +#include <dt-bindings/phy/phy.h>
> 
> Why do you need this include here?
> 
> Regards,
> Matthias
> 

should be part of the ubs patch. V2 coming up in a tad

	John

>>  #include <dt-bindings/pinctrl/mt7623-pinfunc.h>
>>  #include <dt-bindings/power/mt2701-power.h>
>>  #include <dt-bindings/reset/mt2701-resets.h>
>> @@ -281,6 +282,17 @@
>>          status = "disabled";
>>      };
>>
>> +    spi: spi@1100a000 {
>> +        compatible = "mediatek,mt7623-spi",
>> +                 "mediatek,mt6589-spi";
>> +        reg = <0 0x1100a000 0 0x1000>;
>> +        interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
>> +        clocks = <&pericfg CLK_PERI_SPI0>;
>> +        clock-names = "main";
>> +
>> +        status = "disabled";
>> +    };
>> +
>>      hifsys: syscon@1a000000 {
>>          compatible = "mediatek,mt7623-hifsys",
>>                   "mediatek,mt2701-hifsys",
>>
> 
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 08/16] arm: dts: add spi nodes to the mt7623.dtsi file

[John Crispin]

On 24/01/2017 23:39, Matthias Brugger wrote:
> 
> 
> On 01/23/2017 12:29 PM, John Crispin wrote:
>> Add SPI nodes to the mt7623.dtsi file.
>>
>> Signed-off-by: John Crispin <john@phrozen.org>
>> ---
>>  arch/arm/boot/dts/mt7623.dtsi |   12 ++++++++++++
>>  1 file changed, 12 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/mt7623.dtsi
>> b/arch/arm/boot/dts/mt7623.dtsi
>> index 8ac4569..c8f38e1 100644
>> --- a/arch/arm/boot/dts/mt7623.dtsi
>> +++ b/arch/arm/boot/dts/mt7623.dtsi
>> @@ -15,6 +15,7 @@
>>  #include <dt-bindings/interrupt-controller/irq.h>
>>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>>  #include <dt-bindings/clock/mt2701-clk.h>
>> +#include <dt-bindings/phy/phy.h>
> 
> Why do you need this include here?
> 
> Regards,
> Matthias
> 

should be part of the ubs patch. V2 coming up in a tad

	John

>>  #include <dt-bindings/pinctrl/mt7623-pinfunc.h>
>>  #include <dt-bindings/power/mt2701-power.h>
>>  #include <dt-bindings/reset/mt2701-resets.h>
>> @@ -281,6 +282,17 @@
>>          status = "disabled";
>>      };
>>
>> +    spi: spi at 1100a000 {
>> +        compatible = "mediatek,mt7623-spi",
>> +                 "mediatek,mt6589-spi";
>> +        reg = <0 0x1100a000 0 0x1000>;
>> +        interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
>> +        clocks = <&pericfg CLK_PERI_SPI0>;
>> +        clock-names = "main";
>> +
>> +        status = "disabled";
>> +    };
>> +
>>      hifsys: syscon at 1a000000 {
>>          compatible = "mediatek,mt7623-hifsys",
>>                   "mediatek,mt2701-hifsys",
>>
> 
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 13/16] arm: dts: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi

[Rob Herring]

On Mon, Jan 23, 2017 at 12:29:32PM +0100, John Crispin wrote:
> There are 2 versions of the SoC. MT7623N is almost identical to MT7623A
> but has some additional multimedia features. The reference boards are
> available as NAND or MMC and might have a different ethernet setup. In
> order to reduce the duplication of devicetree code we add an intermediate
> dtsi file for these reference boards. Additionally MTK/WCN pointed out,
> that the EVB is yet another board and the board in question is infact the
> RFB. Take this into account while renaming the files.
> 
>  Signed-off-by: John Crispin <john@phrozen.org>
> ---
>  Documentation/devicetree/bindings/arm/mediatek.txt |    4 +--
>  arch/arm/boot/dts/Makefile                         |    2 +-
>  arch/arm/boot/dts/mt7623-evb.dts                   |   33 --------------------
>  arch/arm/boot/dts/mt7623n-rfb-nand.dts             |   21 +++++++++++++
>  arch/arm/boot/dts/mt7623n-rfb.dtsi                 |   29 +++++++++++++++++
>  5 files changed, 53 insertions(+), 36 deletions(-)
>  delete mode 100644 arch/arm/boot/dts/mt7623-evb.dts
>  create mode 100644 arch/arm/boot/dts/mt7623n-rfb-nand.dts
>  create mode 100644 arch/arm/boot/dts/mt7623n-rfb.dtsi
> 
> diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
> index c860b24..71149cb 100644
> --- a/Documentation/devicetree/bindings/arm/mediatek.txt
> +++ b/Documentation/devicetree/bindings/arm/mediatek.txt
> @@ -38,9 +38,9 @@ Supported boards:
>  - Evaluation board for MT6795(Helio X10):
>      Required root node properties:
>        - compatible = "mediatek,mt6795-evb", "mediatek,mt6795";
> -- Evaluation board for MT7623:
> +- Reference  board for MT7623N with NAND:
>      Required root node properties:
> -      - compatible = "mediatek,mt7623-evb", "mediatek,mt7623";
> +      - compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";

Seems like we should have mt7623n as a compatible.

>  - MTK mt8127 tablet moose EVB:
>      Required root node properties:
>        - compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index cccdbcb..9735c2c 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -976,7 +976,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
>  	mt6580-evbp1.dtb \
>  	mt6589-aquaris5.dtb \
>  	mt6592-evb.dtb \
> -	mt7623-evb.dtb \
> +	mt7623n-rfb-nand.dtb \
>  	mt8127-moose.dtb \
>  	mt8135-evbp1.dtb
>  dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
> diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts
> deleted file mode 100644
> index 58ed038..0000000
> --- a/arch/arm/boot/dts/mt7623-evb.dts
> +++ /dev/null
> @@ -1,33 +0,0 @@
> -/*
> - * Copyright (c) 2016 MediaTek Inc.
> - * Author: John Crispin <blogic@openwrt.org>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> - * GNU General Public License for more details.
> - */
> -
> -/dts-v1/;
> -#include "mt7623-mt6323.dtsi"
> -
> -/ {
> -	model = "MediaTek MT7623 evaluation board";
> -	compatible = "mediatek,mt7623-evb", "mediatek,mt7623";
> -
> -	chosen {
> -		stdout-path = &uart2;
> -	};
> -
> -	memory {
> -		reg = <0 0x80000000 0 0x40000000>;
> -	};
> -};
> -
> -&uart2 {
> -	status = "okay";
> -};
> diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
> new file mode 100644
> index 0000000..436d51c
> --- /dev/null
> +++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
> @@ -0,0 +1,21 @@
> +/*
> + * Copyright (c) 2016 MediaTek Inc.
> + * Author: John Crispin <blogic@openwrt.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +/dts-v1/;
> +#include "mt7623n-rfb.dtsi"
> +
> +/ {
> +	model = "MediaTek MT7623N NAND reference board";
> +	compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
> +};
> diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
> new file mode 100644
> index 0000000..d46390e
> --- /dev/null
> +++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
> @@ -0,0 +1,29 @@
> +/*
> + * Copyright (c) 2016 MediaTek Inc.
> + * Author: John Crispin <blogic@openwrt.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include "mt7623-mt6323.dtsi"
> +
> +/ {
> +	chosen {
> +		stdout-path = &uart2;
> +	};
> +
> +	memory {

Unless it can change:

memory@80000000

> +		reg = <0 0x80000000 0 0x40000000>;
> +	};
> +};
> +
> +&uart2 {
> +	status = "okay";
> +};
> -- 
> 1.7.10.4
> 

[PATCH 13/16] arm: dts: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi

[Rob Herring]

On Mon, Jan 23, 2017 at 12:29:32PM +0100, John Crispin wrote:
> There are 2 versions of the SoC. MT7623N is almost identical to MT7623A
> but has some additional multimedia features. The reference boards are
> available as NAND or MMC and might have a different ethernet setup. In
> order to reduce the duplication of devicetree code we add an intermediate
> dtsi file for these reference boards. Additionally MTK/WCN pointed out,
> that the EVB is yet another board and the board in question is infact the
> RFB. Take this into account while renaming the files.
> 
>  Signed-off-by: John Crispin <john@phrozen.org>
> ---
>  Documentation/devicetree/bindings/arm/mediatek.txt |    4 +--
>  arch/arm/boot/dts/Makefile                         |    2 +-
>  arch/arm/boot/dts/mt7623-evb.dts                   |   33 --------------------
>  arch/arm/boot/dts/mt7623n-rfb-nand.dts             |   21 +++++++++++++
>  arch/arm/boot/dts/mt7623n-rfb.dtsi                 |   29 +++++++++++++++++
>  5 files changed, 53 insertions(+), 36 deletions(-)
>  delete mode 100644 arch/arm/boot/dts/mt7623-evb.dts
>  create mode 100644 arch/arm/boot/dts/mt7623n-rfb-nand.dts
>  create mode 100644 arch/arm/boot/dts/mt7623n-rfb.dtsi
> 
> diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
> index c860b24..71149cb 100644
> --- a/Documentation/devicetree/bindings/arm/mediatek.txt
> +++ b/Documentation/devicetree/bindings/arm/mediatek.txt
> @@ -38,9 +38,9 @@ Supported boards:
>  - Evaluation board for MT6795(Helio X10):
>      Required root node properties:
>        - compatible = "mediatek,mt6795-evb", "mediatek,mt6795";
> -- Evaluation board for MT7623:
> +- Reference  board for MT7623N with NAND:
>      Required root node properties:
> -      - compatible = "mediatek,mt7623-evb", "mediatek,mt7623";
> +      - compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";

Seems like we should have mt7623n as a compatible.

>  - MTK mt8127 tablet moose EVB:
>      Required root node properties:
>        - compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index cccdbcb..9735c2c 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -976,7 +976,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
>  	mt6580-evbp1.dtb \
>  	mt6589-aquaris5.dtb \
>  	mt6592-evb.dtb \
> -	mt7623-evb.dtb \
> +	mt7623n-rfb-nand.dtb \
>  	mt8127-moose.dtb \
>  	mt8135-evbp1.dtb
>  dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
> diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts
> deleted file mode 100644
> index 58ed038..0000000
> --- a/arch/arm/boot/dts/mt7623-evb.dts
> +++ /dev/null
> @@ -1,33 +0,0 @@
> -/*
> - * Copyright (c) 2016 MediaTek Inc.
> - * Author: John Crispin <blogic@openwrt.org>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> - * GNU General Public License for more details.
> - */
> -
> -/dts-v1/;
> -#include "mt7623-mt6323.dtsi"
> -
> -/ {
> -	model = "MediaTek MT7623 evaluation board";
> -	compatible = "mediatek,mt7623-evb", "mediatek,mt7623";
> -
> -	chosen {
> -		stdout-path = &uart2;
> -	};
> -
> -	memory {
> -		reg = <0 0x80000000 0 0x40000000>;
> -	};
> -};
> -
> -&uart2 {
> -	status = "okay";
> -};
> diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
> new file mode 100644
> index 0000000..436d51c
> --- /dev/null
> +++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
> @@ -0,0 +1,21 @@
> +/*
> + * Copyright (c) 2016 MediaTek Inc.
> + * Author: John Crispin <blogic@openwrt.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +/dts-v1/;
> +#include "mt7623n-rfb.dtsi"
> +
> +/ {
> +	model = "MediaTek MT7623N NAND reference board";
> +	compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
> +};
> diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
> new file mode 100644
> index 0000000..d46390e
> --- /dev/null
> +++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
> @@ -0,0 +1,29 @@
> +/*
> + * Copyright (c) 2016 MediaTek Inc.
> + * Author: John Crispin <blogic@openwrt.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include "mt7623-mt6323.dtsi"
> +
> +/ {
> +	chosen {
> +		stdout-path = &uart2;
> +	};
> +
> +	memory {

Unless it can change:

memory at 80000000

> +		reg = <0 0x80000000 0 0x40000000>;
> +	};
> +};
> +
> +&uart2 {
> +	status = "okay";
> +};
> -- 
> 1.7.10.4
> 

Re:[PATCH 01/16] arm: dts: add clock controller device nodes

[Sean Wang]

From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>

Hi John,

Some nitpicking below.

>Add clock controller nodes for MT7623, including topckgen, infracfg, pericfg and apmixedsys. This patch 
>also cleans up two oscillators that provide clocks for MT7623. Switch the uart clocks to the real ones 
>while at it.
>
>Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
>---
> arch/arm/boot/dts/mt7623.dtsi |   60 ++++++++++++++++++++++++++++++++++-------
> 1 file changed, 51 insertions(+), 9 deletions(-)
>
>diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index fd2b614..592fc0a 
>100644
>--- a/arch/arm/boot/dts/mt7623.dtsi
>+++ b/arch/arm/boot/dts/mt7623.dtsi
>@@ -14,6 +14,8 @@
> 
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
>+#include <dt-bindings/clock/mt2701-clk.h> #include 
>+<dt-bindings/reset/mt2701-resets.h>
> #include "skeleton64.dtsi"
> 
> / {
>@@ -53,16 +55,18 @@
> 		#clock-cells = <0>;
> 	};
> 
>-	rtc_clk: dummy32k {
>+	rtc32k: oscillator@1 {
> 		compatible = "fixed-clock";
>-		clock-frequency = <32000>;
> 		#clock-cells = <0>;
>+		clock-frequency = <32000>;
>+		clock-output-names = "rtc32k";
> 	};
> 
>-	uart_clk: dummy26m {
>+	clk26m: oscillator@0 {
> 		compatible = "fixed-clock";
>-		clock-frequency = <26000000>;
> 		#clock-cells = <0>;
>+		clock-frequency = <26000000>;
>+		clock-output-names = "clk26m";
> 	};
> 
> 	timer {
>@@ -74,6 +78,32 @@
> 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> 	};
> 
>+	topckgen: syscon@10000000 {
>+		compatible = "mediatek,mt7623-topckgen",
>+			     "mediatek,mt2701-topckgen",
>+			     "syscon";
>+		reg = <0 0x10000000 0 0x1000>;
>+		#clock-cells = <1>;
>+	};
>+
>+	infracfg: syscon@10001000 {
>+		compatible = "mediatek,mt2701-infracfg",
>+			     "mediatek,mt7623-infracfg",

the order should be 
		compatible =  "mediatek,mt7623-pericfg",
			      "mediatek,mt2701-pericfg"
?

>+			     "syscon";
>+		reg = <0 0x10001000 0 0x1000>;
>+		#clock-cells = <1>;
>+		#reset-cells = <1>;
>+	};
>+
>+	pericfg: syscon@10003000 {
>+		compatible =  "mediatek,mt7623-pericfg",
>+			      "mediatek,mt2701-pericfg",
>+			      "syscon";
>+		reg = <0 0x10003000 0 0x1000>;
>+		#clock-cells = <1>;
>+		#reset-cells = <1>;
>+	};
>+
> 	watchdog: watchdog@10007000 {
> 		compatible = "mediatek,mt7623-wdt",
> 			     "mediatek,mt6589-wdt";
>@@ -85,7 +115,7 @@
> 			     "mediatek,mt6577-timer";
> 		reg = <0 0x10008000 0 0x80>;
> 		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
>-		clocks = <&system_clk>, <&rtc_clk>;
>+		clocks = <&system_clk>, <&rtc32k>;
> 		clock-names = "system-clk", "rtc-clk";
> 	};
> 
>@@ -98,6 +128,14 @@
> 		reg = <0 0x10200100 0 0x1c>;
> 	};
> 
>+	apmixedsys: syscon@10209000 {
>+		compatible = "mediatek,mt2701-apmixedsys",
>+			     "mediatek,mt2701-apmixedsys",

duplicated items which seems wrong to type

>+			     "syscon";
>+		reg = <0 0x10209000 0 0x1000>;
>+		#clock-cells = <1>;
>+	};
>+
> 	gic: interrupt-controller@10211000 {
> 		compatible = "arm,cortex-a7-gic";
> 		interrupt-controller;
>@@ -114,7 +152,8 @@
> 			     "mediatek,mt6577-uart";
> 		reg = <0 0x11002000 0 0x400>;
> 		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
>-		clocks = <&uart_clk>;
>+		clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
>+		clock-names = "baud", "bus";
> 		status = "disabled";
> 	};
> 
>@@ -123,7 +162,8 @@
> 			     "mediatek,mt6577-uart";
> 		reg = <0 0x11003000 0 0x400>;
> 		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
>-		clocks = <&uart_clk>;
>+		clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
>+		clock-names = "baud", "bus";
> 		status = "disabled";
> 	};
> 
>@@ -132,7 +172,8 @@
> 			     "mediatek,mt6577-uart";
> 		reg = <0 0x11004000 0 0x400>;
> 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
>-		clocks = <&uart_clk>;
>+		clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
>+		clock-names = "baud", "bus";
> 		status = "disabled";
> 	};
> 
>@@ -141,7 +182,8 @@
> 			     "mediatek,mt6577-uart";
> 		reg = <0 0x11005000 0 0x400>;
> 		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
>-		clocks = <&uart_clk>;
>+		clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
>+		clock-names = "baud", "bus";
> 		status = "disabled";
> 	};
>};
--
1.7.10.4


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 01/16] arm: dts: add clock controller device nodes

[Sean Wang]

From: Sean Wang <sean.wang@mediatek.com>

Hi John,

Some nitpicking below.

>Add clock controller nodes for MT7623, including topckgen, infracfg, pericfg and apmixedsys. This patch 
>also cleans up two oscillators that provide clocks for MT7623. Switch the uart clocks to the real ones 
>while at it.
>
>Signed-off-by: John Crispin <john@phrozen.org>
>---
> arch/arm/boot/dts/mt7623.dtsi |   60 ++++++++++++++++++++++++++++++++++-------
> 1 file changed, 51 insertions(+), 9 deletions(-)
>
>diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index fd2b614..592fc0a 
>100644
>--- a/arch/arm/boot/dts/mt7623.dtsi
>+++ b/arch/arm/boot/dts/mt7623.dtsi
>@@ -14,6 +14,8 @@
> 
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
>+#include <dt-bindings/clock/mt2701-clk.h> #include 
>+<dt-bindings/reset/mt2701-resets.h>
> #include "skeleton64.dtsi"
> 
> / {
>@@ -53,16 +55,18 @@
> 		#clock-cells = <0>;
> 	};
> 
>-	rtc_clk: dummy32k {
>+	rtc32k: oscillator at 1 {
> 		compatible = "fixed-clock";
>-		clock-frequency = <32000>;
> 		#clock-cells = <0>;
>+		clock-frequency = <32000>;
>+		clock-output-names = "rtc32k";
> 	};
> 
>-	uart_clk: dummy26m {
>+	clk26m: oscillator at 0 {
> 		compatible = "fixed-clock";
>-		clock-frequency = <26000000>;
> 		#clock-cells = <0>;
>+		clock-frequency = <26000000>;
>+		clock-output-names = "clk26m";
> 	};
> 
> 	timer {
>@@ -74,6 +78,32 @@
> 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> 	};
> 
>+	topckgen: syscon at 10000000 {
>+		compatible = "mediatek,mt7623-topckgen",
>+			     "mediatek,mt2701-topckgen",
>+			     "syscon";
>+		reg = <0 0x10000000 0 0x1000>;
>+		#clock-cells = <1>;
>+	};
>+
>+	infracfg: syscon at 10001000 {
>+		compatible = "mediatek,mt2701-infracfg",
>+			     "mediatek,mt7623-infracfg",

the order should be 
		compatible =  "mediatek,mt7623-pericfg",
			      "mediatek,mt2701-pericfg"
?

>+			     "syscon";
>+		reg = <0 0x10001000 0 0x1000>;
>+		#clock-cells = <1>;
>+		#reset-cells = <1>;
>+	};
>+
>+	pericfg: syscon at 10003000 {
>+		compatible =  "mediatek,mt7623-pericfg",
>+			      "mediatek,mt2701-pericfg",
>+			      "syscon";
>+		reg = <0 0x10003000 0 0x1000>;
>+		#clock-cells = <1>;
>+		#reset-cells = <1>;
>+	};
>+
> 	watchdog: watchdog at 10007000 {
> 		compatible = "mediatek,mt7623-wdt",
> 			     "mediatek,mt6589-wdt";
>@@ -85,7 +115,7 @@
> 			     "mediatek,mt6577-timer";
> 		reg = <0 0x10008000 0 0x80>;
> 		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
>-		clocks = <&system_clk>, <&rtc_clk>;
>+		clocks = <&system_clk>, <&rtc32k>;
> 		clock-names = "system-clk", "rtc-clk";
> 	};
> 
>@@ -98,6 +128,14 @@
> 		reg = <0 0x10200100 0 0x1c>;
> 	};
> 
>+	apmixedsys: syscon at 10209000 {
>+		compatible = "mediatek,mt2701-apmixedsys",
>+			     "mediatek,mt2701-apmixedsys",

duplicated items which seems wrong to type

>+			     "syscon";
>+		reg = <0 0x10209000 0 0x1000>;
>+		#clock-cells = <1>;
>+	};
>+
> 	gic: interrupt-controller at 10211000 {
> 		compatible = "arm,cortex-a7-gic";
> 		interrupt-controller;
>@@ -114,7 +152,8 @@
> 			     "mediatek,mt6577-uart";
> 		reg = <0 0x11002000 0 0x400>;
> 		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
>-		clocks = <&uart_clk>;
>+		clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
>+		clock-names = "baud", "bus";
> 		status = "disabled";
> 	};
> 
>@@ -123,7 +162,8 @@
> 			     "mediatek,mt6577-uart";
> 		reg = <0 0x11003000 0 0x400>;
> 		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
>-		clocks = <&uart_clk>;
>+		clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
>+		clock-names = "baud", "bus";
> 		status = "disabled";
> 	};
> 
>@@ -132,7 +172,8 @@
> 			     "mediatek,mt6577-uart";
> 		reg = <0 0x11004000 0 0x400>;
> 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
>-		clocks = <&uart_clk>;
>+		clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
>+		clock-names = "baud", "bus";
> 		status = "disabled";
> 	};
> 
>@@ -141,7 +182,8 @@
> 			     "mediatek,mt6577-uart";
> 		reg = <0 0x11005000 0 0x400>;
> 		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
>-		clocks = <&uart_clk>;
>+		clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
>+		clock-names = "baud", "bus";
> 		status = "disabled";
> 	};
>};
--
1.7.10.4


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re:[PATCH 01/16] arm: dts: add clock controller device nodes

[Sean Wang]

From: Sean Wang <sean.wang@mediatek.com>

Hi John,

Some nitpicking below.

>Add clock controller nodes for MT7623, including topckgen, infracfg, pericfg and apmixedsys. This patch 
>also cleans up two oscillators that provide clocks for MT7623. Switch the uart clocks to the real ones 
>while at it.
>
>Signed-off-by: John Crispin <john@phrozen.org>
>---
> arch/arm/boot/dts/mt7623.dtsi |   60 ++++++++++++++++++++++++++++++++++-------
> 1 file changed, 51 insertions(+), 9 deletions(-)
>
>diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index fd2b614..592fc0a 
>100644
>--- a/arch/arm/boot/dts/mt7623.dtsi
>+++ b/arch/arm/boot/dts/mt7623.dtsi
>@@ -14,6 +14,8 @@
> 
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
>+#include <dt-bindings/clock/mt2701-clk.h> #include 
>+<dt-bindings/reset/mt2701-resets.h>
> #include "skeleton64.dtsi"
> 
> / {
>@@ -53,16 +55,18 @@
> 		#clock-cells = <0>;
> 	};
> 
>-	rtc_clk: dummy32k {
>+	rtc32k: oscillator@1 {
> 		compatible = "fixed-clock";
>-		clock-frequency = <32000>;
> 		#clock-cells = <0>;
>+		clock-frequency = <32000>;
>+		clock-output-names = "rtc32k";
> 	};
> 
>-	uart_clk: dummy26m {
>+	clk26m: oscillator@0 {
> 		compatible = "fixed-clock";
>-		clock-frequency = <26000000>;
> 		#clock-cells = <0>;
>+		clock-frequency = <26000000>;
>+		clock-output-names = "clk26m";
> 	};
> 
> 	timer {
>@@ -74,6 +78,32 @@
> 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> 	};
> 
>+	topckgen: syscon@10000000 {
>+		compatible = "mediatek,mt7623-topckgen",
>+			     "mediatek,mt2701-topckgen",
>+			     "syscon";
>+		reg = <0 0x10000000 0 0x1000>;
>+		#clock-cells = <1>;
>+	};
>+
>+	infracfg: syscon@10001000 {
>+		compatible = "mediatek,mt2701-infracfg",
>+			     "mediatek,mt7623-infracfg",

the order should be 
		compatible =  "mediatek,mt7623-pericfg",
			      "mediatek,mt2701-pericfg"
?

>+			     "syscon";
>+		reg = <0 0x10001000 0 0x1000>;
>+		#clock-cells = <1>;
>+		#reset-cells = <1>;
>+	};
>+
>+	pericfg: syscon@10003000 {
>+		compatible =  "mediatek,mt7623-pericfg",
>+			      "mediatek,mt2701-pericfg",
>+			      "syscon";
>+		reg = <0 0x10003000 0 0x1000>;
>+		#clock-cells = <1>;
>+		#reset-cells = <1>;
>+	};
>+
> 	watchdog: watchdog@10007000 {
> 		compatible = "mediatek,mt7623-wdt",
> 			     "mediatek,mt6589-wdt";
>@@ -85,7 +115,7 @@
> 			     "mediatek,mt6577-timer";
> 		reg = <0 0x10008000 0 0x80>;
> 		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
>-		clocks = <&system_clk>, <&rtc_clk>;
>+		clocks = <&system_clk>, <&rtc32k>;
> 		clock-names = "system-clk", "rtc-clk";
> 	};
> 
>@@ -98,6 +128,14 @@
> 		reg = <0 0x10200100 0 0x1c>;
> 	};
> 
>+	apmixedsys: syscon@10209000 {
>+		compatible = "mediatek,mt2701-apmixedsys",
>+			     "mediatek,mt2701-apmixedsys",

duplicated items which seems wrong to type

>+			     "syscon";
>+		reg = <0 0x10209000 0 0x1000>;
>+		#clock-cells = <1>;
>+	};
>+
> 	gic: interrupt-controller@10211000 {
> 		compatible = "arm,cortex-a7-gic";
> 		interrupt-controller;
>@@ -114,7 +152,8 @@
> 			     "mediatek,mt6577-uart";
> 		reg = <0 0x11002000 0 0x400>;
> 		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
>-		clocks = <&uart_clk>;
>+		clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
>+		clock-names = "baud", "bus";
> 		status = "disabled";
> 	};
> 
>@@ -123,7 +162,8 @@
> 			     "mediatek,mt6577-uart";
> 		reg = <0 0x11003000 0 0x400>;
> 		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
>-		clocks = <&uart_clk>;
>+		clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
>+		clock-names = "baud", "bus";
> 		status = "disabled";
> 	};
> 
>@@ -132,7 +172,8 @@
> 			     "mediatek,mt6577-uart";
> 		reg = <0 0x11004000 0 0x400>;
> 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
>-		clocks = <&uart_clk>;
>+		clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
>+		clock-names = "baud", "bus";
> 		status = "disabled";
> 	};
> 
>@@ -141,7 +182,8 @@
> 			     "mediatek,mt6577-uart";
> 		reg = <0 0x11005000 0 0x400>;
> 		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
>-		clocks = <&uart_clk>;
>+		clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
>+		clock-names = "baud", "bus";
> 		status = "disabled";
> 	};
>};
--
1.7.10.4


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH 01/16] arm: dts: add clock controller device nodes

[Sean Wang]

From: Sean Wang <sean.wang@mediatek.com>

Hi John,

Some nitpicking below.

>Add clock controller nodes for MT7623, including topckgen, infracfg, pericfg and apmixedsys. This patch 
>also cleans up two oscillators that provide clocks for MT7623. Switch the uart clocks to the real ones 
>while at it.
>
>Signed-off-by: John Crispin <john@phrozen.org>
>---
> arch/arm/boot/dts/mt7623.dtsi |   60 ++++++++++++++++++++++++++++++++++-------
> 1 file changed, 51 insertions(+), 9 deletions(-)
>
>diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index fd2b614..592fc0a 
>100644
>--- a/arch/arm/boot/dts/mt7623.dtsi
>+++ b/arch/arm/boot/dts/mt7623.dtsi
>@@ -14,6 +14,8 @@
> 
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
>+#include <dt-bindings/clock/mt2701-clk.h> #include 
>+<dt-bindings/reset/mt2701-resets.h>
> #include "skeleton64.dtsi"
> 
> / {
>@@ -53,16 +55,18 @@
> 		#clock-cells = <0>;
> 	};
> 
>-	rtc_clk: dummy32k {
>+	rtc32k: oscillator at 1 {
> 		compatible = "fixed-clock";
>-		clock-frequency = <32000>;
> 		#clock-cells = <0>;
>+		clock-frequency = <32000>;
>+		clock-output-names = "rtc32k";
> 	};
> 
>-	uart_clk: dummy26m {
>+	clk26m: oscillator at 0 {
> 		compatible = "fixed-clock";
>-		clock-frequency = <26000000>;
> 		#clock-cells = <0>;
>+		clock-frequency = <26000000>;
>+		clock-output-names = "clk26m";
> 	};
> 
> 	timer {
>@@ -74,6 +78,32 @@
> 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> 	};
> 
>+	topckgen: syscon at 10000000 {
>+		compatible = "mediatek,mt7623-topckgen",
>+			     "mediatek,mt2701-topckgen",
>+			     "syscon";
>+		reg = <0 0x10000000 0 0x1000>;
>+		#clock-cells = <1>;
>+	};
>+
>+	infracfg: syscon at 10001000 {
>+		compatible = "mediatek,mt2701-infracfg",
>+			     "mediatek,mt7623-infracfg",

the order should be 
		compatible =  "mediatek,mt7623-pericfg",
			      "mediatek,mt2701-pericfg"
?

>+			     "syscon";
>+		reg = <0 0x10001000 0 0x1000>;
>+		#clock-cells = <1>;
>+		#reset-cells = <1>;
>+	};
>+
>+	pericfg: syscon at 10003000 {
>+		compatible =  "mediatek,mt7623-pericfg",
>+			      "mediatek,mt2701-pericfg",
>+			      "syscon";
>+		reg = <0 0x10003000 0 0x1000>;
>+		#clock-cells = <1>;
>+		#reset-cells = <1>;
>+	};
>+
> 	watchdog: watchdog at 10007000 {
> 		compatible = "mediatek,mt7623-wdt",
> 			     "mediatek,mt6589-wdt";
>@@ -85,7 +115,7 @@
> 			     "mediatek,mt6577-timer";
> 		reg = <0 0x10008000 0 0x80>;
> 		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
>-		clocks = <&system_clk>, <&rtc_clk>;
>+		clocks = <&system_clk>, <&rtc32k>;
> 		clock-names = "system-clk", "rtc-clk";
> 	};
> 
>@@ -98,6 +128,14 @@
> 		reg = <0 0x10200100 0 0x1c>;
> 	};
> 
>+	apmixedsys: syscon at 10209000 {
>+		compatible = "mediatek,mt2701-apmixedsys",
>+			     "mediatek,mt2701-apmixedsys",

duplicated items which seems wrong to type

>+			     "syscon";
>+		reg = <0 0x10209000 0 0x1000>;
>+		#clock-cells = <1>;
>+	};
>+
> 	gic: interrupt-controller at 10211000 {
> 		compatible = "arm,cortex-a7-gic";
> 		interrupt-controller;
>@@ -114,7 +152,8 @@
> 			     "mediatek,mt6577-uart";
> 		reg = <0 0x11002000 0 0x400>;
> 		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
>-		clocks = <&uart_clk>;
>+		clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
>+		clock-names = "baud", "bus";
> 		status = "disabled";
> 	};
> 
>@@ -123,7 +162,8 @@
> 			     "mediatek,mt6577-uart";
> 		reg = <0 0x11003000 0 0x400>;
> 		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
>-		clocks = <&uart_clk>;
>+		clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
>+		clock-names = "baud", "bus";
> 		status = "disabled";
> 	};
> 
>@@ -132,7 +172,8 @@
> 			     "mediatek,mt6577-uart";
> 		reg = <0 0x11004000 0 0x400>;
> 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
>-		clocks = <&uart_clk>;
>+		clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
>+		clock-names = "baud", "bus";
> 		status = "disabled";
> 	};
> 
>@@ -141,7 +182,8 @@
> 			     "mediatek,mt6577-uart";
> 		reg = <0 0x11005000 0 0x400>;
> 		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
>-		clocks = <&uart_clk>;
>+		clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
>+		clock-names = "baud", "bus";
> 		status = "disabled";
> 	};
>};
--
1.7.10.4


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek