From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
To: Kevin Hilman <khilman@kernel.org>, Sekhar Nori <nsekhar@ti.com>,
Patrick Titiano <ptitiano@baylibre.com>,
Michael Turquette <mturquette@baylibre.com>,
Tejun Heo <tj@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>,
David Lechner <david@lechnology.com>
Cc: linux-ide@vger.kernel.org,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH v6 01/14] devicetree: bindings: add bindings for ahci-da850
Date: Mon, 23 Jan 2017 18:00:43 +0100 [thread overview]
Message-ID: <1485190856-4711-2-git-send-email-bgolaszewski@baylibre.com> (raw)
In-Reply-To: <1485190856-4711-1-git-send-email-bgolaszewski@baylibre.com>
Add DT bindings for the TI DA850 AHCI SATA controller.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
Documentation/devicetree/bindings/ata/ahci-da850.txt | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
create mode 100644 Documentation/devicetree/bindings/ata/ahci-da850.txt
diff --git a/Documentation/devicetree/bindings/ata/ahci-da850.txt b/Documentation/devicetree/bindings/ata/ahci-da850.txt
new file mode 100644
index 0000000..5f81934
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-da850.txt
@@ -0,0 +1,18 @@
+Device tree binding for the TI DA850 AHCI SATA Controller
+---------------------------------------------------------
+
+Required properties:
+ - compatible: must be "ti,da850-ahci"
+ - reg: physical base addresses and sizes of the two register regions
+ used by the controller: the register map as defined by the
+ AHCI 1.1 standard and the Power Down Control Register (PWRDN)
+ for enabling/disabling the SATA clock receiver
+ - interrupts: interrupt specifier (refer to the interrupt binding)
+
+Example:
+
+ sata: sata@218000 {
+ compatible = "ti,da850-ahci";
+ reg = <0x218000 0x2000>, <0x22c018 0x4>;
+ interrupts = <67>;
+ };
--
2.9.3
WARNING: multiple messages have this Message-ID (diff)
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
To: Kevin Hilman <khilman@kernel.org>, Sekhar Nori <nsekhar@ti.com>,
Patrick Titiano <ptitiano@baylibre.com>,
Michael Turquette <mturquette@baylibre.com>,
Tejun Heo <tj@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>,
David Lechner <david@lechnology.com>
Cc: linux-ide@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Bartosz Golaszewski <bgolaszewski@baylibre.com>
Subject: [PATCH v6 01/14] devicetree: bindings: add bindings for ahci-da850
Date: Mon, 23 Jan 2017 18:00:43 +0100 [thread overview]
Message-ID: <1485190856-4711-2-git-send-email-bgolaszewski@baylibre.com> (raw)
In-Reply-To: <1485190856-4711-1-git-send-email-bgolaszewski@baylibre.com>
Add DT bindings for the TI DA850 AHCI SATA controller.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
Documentation/devicetree/bindings/ata/ahci-da850.txt | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
create mode 100644 Documentation/devicetree/bindings/ata/ahci-da850.txt
diff --git a/Documentation/devicetree/bindings/ata/ahci-da850.txt b/Documentation/devicetree/bindings/ata/ahci-da850.txt
new file mode 100644
index 0000000..5f81934
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-da850.txt
@@ -0,0 +1,18 @@
+Device tree binding for the TI DA850 AHCI SATA Controller
+---------------------------------------------------------
+
+Required properties:
+ - compatible: must be "ti,da850-ahci"
+ - reg: physical base addresses and sizes of the two register regions
+ used by the controller: the register map as defined by the
+ AHCI 1.1 standard and the Power Down Control Register (PWRDN)
+ for enabling/disabling the SATA clock receiver
+ - interrupts: interrupt specifier (refer to the interrupt binding)
+
+Example:
+
+ sata: sata@218000 {
+ compatible = "ti,da850-ahci";
+ reg = <0x218000 0x2000>, <0x22c018 0x4>;
+ interrupts = <67>;
+ };
--
2.9.3
WARNING: multiple messages have this Message-ID (diff)
From: bgolaszewski@baylibre.com (Bartosz Golaszewski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 01/14] devicetree: bindings: add bindings for ahci-da850
Date: Mon, 23 Jan 2017 18:00:43 +0100 [thread overview]
Message-ID: <1485190856-4711-2-git-send-email-bgolaszewski@baylibre.com> (raw)
In-Reply-To: <1485190856-4711-1-git-send-email-bgolaszewski@baylibre.com>
Add DT bindings for the TI DA850 AHCI SATA controller.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
Documentation/devicetree/bindings/ata/ahci-da850.txt | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
create mode 100644 Documentation/devicetree/bindings/ata/ahci-da850.txt
diff --git a/Documentation/devicetree/bindings/ata/ahci-da850.txt b/Documentation/devicetree/bindings/ata/ahci-da850.txt
new file mode 100644
index 0000000..5f81934
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-da850.txt
@@ -0,0 +1,18 @@
+Device tree binding for the TI DA850 AHCI SATA Controller
+---------------------------------------------------------
+
+Required properties:
+ - compatible: must be "ti,da850-ahci"
+ - reg: physical base addresses and sizes of the two register regions
+ used by the controller: the register map as defined by the
+ AHCI 1.1 standard and the Power Down Control Register (PWRDN)
+ for enabling/disabling the SATA clock receiver
+ - interrupts: interrupt specifier (refer to the interrupt binding)
+
+Example:
+
+ sata: sata at 218000 {
+ compatible = "ti,da850-ahci";
+ reg = <0x218000 0x2000>, <0x22c018 0x4>;
+ interrupts = <67>;
+ };
--
2.9.3
next prev parent reply other threads:[~2017-01-23 17:00 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-23 17:00 [PATCH v6 00/14] ARM: da850-lcdk: add SATA support Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski [this message]
2017-01-23 17:00 ` [PATCH v6 01/14] devicetree: bindings: add bindings for ahci-da850 Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-27 20:58 ` Rob Herring
2017-01-27 20:58 ` Rob Herring
2017-01-23 17:00 ` [PATCH v6 02/14] ARM: davinci_all_defconfig: enable SATA modules Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-23 17:00 ` [PATCH v6 03/14] ARM: davinci: add a clock lookup entry for the SATA clock Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-23 17:00 ` [PATCH v6 04/14] sata: ahci-da850: get the sata clock using a connection id Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-23 17:00 ` [PATCH v6 05/14] ARM: davinci: da850: add con_id for the SATA clock Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-26 16:56 ` Grygorii Strashko
2017-01-26 16:56 ` Grygorii Strashko
2017-01-26 16:56 ` Grygorii Strashko
2017-01-26 17:40 ` Sekhar Nori
2017-01-26 17:40 ` Sekhar Nori
2017-01-26 17:40 ` Sekhar Nori
[not found] ` <645778dd-6727-abd0-3dd9-a7e0d5aa4983-l0cyMroinI0@public.gmane.org>
2017-01-27 9:55 ` Bartosz Golaszewski
2017-01-27 9:55 ` Bartosz Golaszewski
2017-01-27 9:55 ` Bartosz Golaszewski
2017-01-27 9:58 ` Sekhar Nori
2017-01-27 9:58 ` Sekhar Nori
2017-01-27 9:58 ` Sekhar Nori
2017-01-23 17:00 ` [PATCH v6 06/14] ARM: davinci: da850: model the SATA refclk Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-23 17:00 ` [PATCH v6 07/14] sata: ahci-da850: add device tree match table Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-23 17:00 ` [PATCH v6 08/14] sata: ahci-da850: implement a workaround for the softreset quirk Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-23 17:00 ` [PATCH v6 09/14] sata: ahci: export ahci_do_hardreset() locally Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-23 17:00 ` [PATCH v6 10/14] sata: ahci-da850: add a workaround for controller instability Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-23 17:00 ` [PATCH v6 11/14] sata: ahci-da850: un-hardcode the MPY bits Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-23 17:00 ` [PATCH v6 12/14] ARM: davinci: remove BUG_ON() from da850_register_sata() Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-23 17:00 ` [PATCH v6 13/14] ARM: dts: da850: add the SATA node Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
[not found] ` <1485190856-4711-1-git-send-email-bgolaszewski-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2017-01-23 17:00 ` [PATCH v6 14/14] ARM: dts: da850-lcdk: enable " Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
2017-01-23 17:00 ` Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1485190856-4711-2-git-send-email-bgolaszewski@baylibre.com \
--to=bgolaszewski@baylibre.com \
--cc=david@lechnology.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=nsekhar@ti.com \
--cc=ptitiano@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.