All of lore.kernel.org
 help / color / mirror / Atom feed
From: Neil Armstrong <narmstrong@baylibre.com>
To: dri-devel@lists.freedesktop.org,
	laurent.pinchart+renesas@ideasonboard.com
Cc: Neil Armstrong <narmstrong@baylibre.com>,
	Jose.Abreu@synopsys.com, kieran.bingham@ideasonboard.com,
	linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/4] drm: bridge: dw-hdmi: Switch to regmap for register access
Date: Mon, 30 Jan 2017 12:05:15 +0100	[thread overview]
Message-ID: <1485774318-21916-2-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1485774318-21916-1-git-send-email-narmstrong@baylibre.com>

The Synopsys Designware HDMI TX Controller does not enforce register
access on platforms instanciating it. The current driver supports two
different types of memory-mapped flat register access, but in order to
support the Amlogic Meson SoCs integration, and provide a more generic
way to handle all sorts of register mapping, switch the register access
to use the regmap infrastructure.

In the case of registers that are not flat memory-mapped or do not
conform to the current driver implementation, a regmap struct can be
given in the plat_data and be used at probe or bind.

Since the AHB audio driver is only available with direct memory access,
only allow the I2S audio driver to be registered is directly
memory-mapped.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/gpu/drm/bridge/dw-hdmi.c | 109 +++++++++++++++++++++------------------
 include/drm/bridge/dw_hdmi.h     |   1 +
 2 files changed, 59 insertions(+), 51 deletions(-)

diff --git a/drivers/gpu/drm/bridge/dw-hdmi.c b/drivers/gpu/drm/bridge/dw-hdmi.c
index ca9d0ce..674ab05 100644
--- a/drivers/gpu/drm/bridge/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/dw-hdmi.c
@@ -19,6 +19,7 @@
 #include <linux/hdmi.h>
 #include <linux/mutex.h>
 #include <linux/of_device.h>
+#include <linux/regmap.h>
 #include <linux/spinlock.h>
 
 #include <drm/drm_of.h>
@@ -167,8 +168,8 @@ struct dw_hdmi {
 	unsigned int audio_n;
 	bool audio_enable;
 
-	void (*write)(struct dw_hdmi *hdmi, u8 val, int offset);
-	u8 (*read)(struct dw_hdmi *hdmi, int offset);
+	unsigned int reg_shift;
+	struct regmap *regm;
 };
 
 #define HDMI_IH_PHY_STAT0_RX_SENSE \
@@ -179,42 +180,23 @@ struct dw_hdmi {
 	(HDMI_PHY_RX_SENSE0 | HDMI_PHY_RX_SENSE1 | \
 	 HDMI_PHY_RX_SENSE2 | HDMI_PHY_RX_SENSE3)
 
-static void dw_hdmi_writel(struct dw_hdmi *hdmi, u8 val, int offset)
-{
-	writel(val, hdmi->regs + (offset << 2));
-}
-
-static u8 dw_hdmi_readl(struct dw_hdmi *hdmi, int offset)
-{
-	return readl(hdmi->regs + (offset << 2));
-}
-
-static void dw_hdmi_writeb(struct dw_hdmi *hdmi, u8 val, int offset)
-{
-	writeb(val, hdmi->regs + offset);
-}
-
-static u8 dw_hdmi_readb(struct dw_hdmi *hdmi, int offset)
-{
-	return readb(hdmi->regs + offset);
-}
-
 static inline void hdmi_writeb(struct dw_hdmi *hdmi, u8 val, int offset)
 {
-	hdmi->write(hdmi, val, offset);
+	regmap_write(hdmi->regm, offset << hdmi->reg_shift, val);
 }
 
 static inline u8 hdmi_readb(struct dw_hdmi *hdmi, int offset)
 {
-	return hdmi->read(hdmi, offset);
+	unsigned int val = 0;
+
+	regmap_read(hdmi->regm, offset << hdmi->reg_shift, &val);
+
+	return val;
 }
 
 static void hdmi_modb(struct dw_hdmi *hdmi, u8 data, u8 mask, unsigned reg)
 {
-	u8 val = hdmi_readb(hdmi, reg) & ~mask;
-
-	val |= data & mask;
-	hdmi_writeb(hdmi, val, reg);
+	regmap_update_bits(hdmi->regm, reg << hdmi->reg_shift, mask, data);
 }
 
 static void hdmi_mask_writeb(struct dw_hdmi *hdmi, u8 data, unsigned int reg,
@@ -1949,6 +1931,20 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
 	return 0;
 }
 
+static const struct regmap_config hdmi_regmap_8bit_config = {
+	.reg_bits	= 32,
+	.val_bits	= 8,
+	.reg_stride	= 1,
+	.max_register	= HDMI_I2CM_FS_SCL_LCNT_0_ADDR,
+};
+
+static const struct regmap_config hdmi_regmap_32bit_config = {
+	.reg_bits	= 32,
+	.val_bits	= 32,
+	.reg_stride	= 4,
+	.max_register	= HDMI_I2CM_FS_SCL_LCNT_0_ADDR << 2,
+};
+
 static struct dw_hdmi *
 __dw_hdmi_probe(struct platform_device *pdev,
 		const struct dw_hdmi_plat_data *plat_data)
@@ -1958,7 +1954,7 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
 	struct platform_device_info pdevinfo;
 	struct device_node *ddc_node;
 	struct dw_hdmi *hdmi;
-	struct resource *iores;
+	struct resource *iores = NULL;
 	int irq;
 	int ret;
 	u32 val = 1;
@@ -1982,22 +1978,6 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
 	mutex_init(&hdmi->audio_mutex);
 	spin_lock_init(&hdmi->audio_lock);
 
-	of_property_read_u32(np, "reg-io-width", &val);
-
-	switch (val) {
-	case 4:
-		hdmi->write = dw_hdmi_writel;
-		hdmi->read = dw_hdmi_readl;
-		break;
-	case 1:
-		hdmi->write = dw_hdmi_writeb;
-		hdmi->read = dw_hdmi_readb;
-		break;
-	default:
-		dev_err(dev, "reg-io-width must be 1 or 4\n");
-		return ERR_PTR(-EINVAL);
-	}
-
 	ddc_node = of_parse_phandle(np, "ddc-i2c-bus", 0);
 	if (ddc_node) {
 		hdmi->ddc = of_get_i2c_adapter_by_node(ddc_node);
@@ -2011,11 +1991,38 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
 		dev_dbg(hdmi->dev, "no ddc property found\n");
 	}
 
-	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	hdmi->regs = devm_ioremap_resource(dev, iores);
-	if (IS_ERR(hdmi->regs)) {
-		ret = PTR_ERR(hdmi->regs);
-		goto err_res;
+	if (!plat_data->regm) {
+		const struct regmap_config *reg_config;
+
+		of_property_read_u32(np, "reg-io-width", &val);
+		switch (val) {
+		case 4:
+			reg_config = &hdmi_regmap_32bit_config;
+			hdmi->reg_shift = 2;
+			break;
+		case 1:
+			reg_config = &hdmi_regmap_8bit_config;
+			break;
+		default:
+			dev_err(dev, "reg-io-width must be 1 or 4\n");
+			return ERR_PTR(-EINVAL);
+		}
+
+		iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		hdmi->regs = devm_ioremap_resource(dev, iores);
+		if (IS_ERR(hdmi->regs)) {
+			ret = PTR_ERR(hdmi->regs);
+			goto err_res;
+		}
+
+		hdmi->regm = devm_regmap_init_mmio(dev, hdmi->regs, reg_config);
+		if (IS_ERR(hdmi->regm)) {
+			dev_err(dev, "Failed to configure regmap\n");
+			ret = PTR_ERR(hdmi->regm);
+			goto err_res;
+		}
+	} else {
+		hdmi->regm = plat_data->regm;
 	}
 
 	hdmi->isfr_clk = devm_clk_get(hdmi->dev, "isfr");
@@ -2123,7 +2130,7 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
 	config0 = hdmi_readb(hdmi, HDMI_CONFIG0_ID);
 	config3 = hdmi_readb(hdmi, HDMI_CONFIG3_ID);
 
-	if (config3 & HDMI_CONFIG3_AHBAUDDMA) {
+	if (iores && config3 & HDMI_CONFIG3_AHBAUDDMA) {
 		struct dw_hdmi_audio_data audio;
 
 		audio.phys = iores->start;
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index 735a8ab..163842d 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -60,6 +60,7 @@ struct dw_hdmi_plat_data {
 			     unsigned long mpixelclock);
 	enum drm_mode_status (*mode_valid)(struct drm_connector *connector,
 					   struct drm_display_mode *mode);
+	struct regmap *regm;
 };
 
 int dw_hdmi_probe(struct platform_device *pdev,
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: dri-devel@lists.freedesktop.org,
	laurent.pinchart+renesas@ideasonboard.com
Cc: Jose.Abreu@synopsys.com, linux-amlogic@lists.infradead.org,
	kieran.bingham@ideasonboard.com, linux-kernel@vger.kernel.org,
	Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 1/4] drm: bridge: dw-hdmi: Switch to regmap for register access
Date: Mon, 30 Jan 2017 12:05:15 +0100	[thread overview]
Message-ID: <1485774318-21916-2-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1485774318-21916-1-git-send-email-narmstrong@baylibre.com>

The Synopsys Designware HDMI TX Controller does not enforce register
access on platforms instanciating it. The current driver supports two
different types of memory-mapped flat register access, but in order to
support the Amlogic Meson SoCs integration, and provide a more generic
way to handle all sorts of register mapping, switch the register access
to use the regmap infrastructure.

In the case of registers that are not flat memory-mapped or do not
conform to the current driver implementation, a regmap struct can be
given in the plat_data and be used at probe or bind.

Since the AHB audio driver is only available with direct memory access,
only allow the I2S audio driver to be registered is directly
memory-mapped.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/gpu/drm/bridge/dw-hdmi.c | 109 +++++++++++++++++++++------------------
 include/drm/bridge/dw_hdmi.h     |   1 +
 2 files changed, 59 insertions(+), 51 deletions(-)

diff --git a/drivers/gpu/drm/bridge/dw-hdmi.c b/drivers/gpu/drm/bridge/dw-hdmi.c
index ca9d0ce..674ab05 100644
--- a/drivers/gpu/drm/bridge/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/dw-hdmi.c
@@ -19,6 +19,7 @@
 #include <linux/hdmi.h>
 #include <linux/mutex.h>
 #include <linux/of_device.h>
+#include <linux/regmap.h>
 #include <linux/spinlock.h>
 
 #include <drm/drm_of.h>
@@ -167,8 +168,8 @@ struct dw_hdmi {
 	unsigned int audio_n;
 	bool audio_enable;
 
-	void (*write)(struct dw_hdmi *hdmi, u8 val, int offset);
-	u8 (*read)(struct dw_hdmi *hdmi, int offset);
+	unsigned int reg_shift;
+	struct regmap *regm;
 };
 
 #define HDMI_IH_PHY_STAT0_RX_SENSE \
@@ -179,42 +180,23 @@ struct dw_hdmi {
 	(HDMI_PHY_RX_SENSE0 | HDMI_PHY_RX_SENSE1 | \
 	 HDMI_PHY_RX_SENSE2 | HDMI_PHY_RX_SENSE3)
 
-static void dw_hdmi_writel(struct dw_hdmi *hdmi, u8 val, int offset)
-{
-	writel(val, hdmi->regs + (offset << 2));
-}
-
-static u8 dw_hdmi_readl(struct dw_hdmi *hdmi, int offset)
-{
-	return readl(hdmi->regs + (offset << 2));
-}
-
-static void dw_hdmi_writeb(struct dw_hdmi *hdmi, u8 val, int offset)
-{
-	writeb(val, hdmi->regs + offset);
-}
-
-static u8 dw_hdmi_readb(struct dw_hdmi *hdmi, int offset)
-{
-	return readb(hdmi->regs + offset);
-}
-
 static inline void hdmi_writeb(struct dw_hdmi *hdmi, u8 val, int offset)
 {
-	hdmi->write(hdmi, val, offset);
+	regmap_write(hdmi->regm, offset << hdmi->reg_shift, val);
 }
 
 static inline u8 hdmi_readb(struct dw_hdmi *hdmi, int offset)
 {
-	return hdmi->read(hdmi, offset);
+	unsigned int val = 0;
+
+	regmap_read(hdmi->regm, offset << hdmi->reg_shift, &val);
+
+	return val;
 }
 
 static void hdmi_modb(struct dw_hdmi *hdmi, u8 data, u8 mask, unsigned reg)
 {
-	u8 val = hdmi_readb(hdmi, reg) & ~mask;
-
-	val |= data & mask;
-	hdmi_writeb(hdmi, val, reg);
+	regmap_update_bits(hdmi->regm, reg << hdmi->reg_shift, mask, data);
 }
 
 static void hdmi_mask_writeb(struct dw_hdmi *hdmi, u8 data, unsigned int reg,
@@ -1949,6 +1931,20 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
 	return 0;
 }
 
+static const struct regmap_config hdmi_regmap_8bit_config = {
+	.reg_bits	= 32,
+	.val_bits	= 8,
+	.reg_stride	= 1,
+	.max_register	= HDMI_I2CM_FS_SCL_LCNT_0_ADDR,
+};
+
+static const struct regmap_config hdmi_regmap_32bit_config = {
+	.reg_bits	= 32,
+	.val_bits	= 32,
+	.reg_stride	= 4,
+	.max_register	= HDMI_I2CM_FS_SCL_LCNT_0_ADDR << 2,
+};
+
 static struct dw_hdmi *
 __dw_hdmi_probe(struct platform_device *pdev,
 		const struct dw_hdmi_plat_data *plat_data)
@@ -1958,7 +1954,7 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
 	struct platform_device_info pdevinfo;
 	struct device_node *ddc_node;
 	struct dw_hdmi *hdmi;
-	struct resource *iores;
+	struct resource *iores = NULL;
 	int irq;
 	int ret;
 	u32 val = 1;
@@ -1982,22 +1978,6 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
 	mutex_init(&hdmi->audio_mutex);
 	spin_lock_init(&hdmi->audio_lock);
 
-	of_property_read_u32(np, "reg-io-width", &val);
-
-	switch (val) {
-	case 4:
-		hdmi->write = dw_hdmi_writel;
-		hdmi->read = dw_hdmi_readl;
-		break;
-	case 1:
-		hdmi->write = dw_hdmi_writeb;
-		hdmi->read = dw_hdmi_readb;
-		break;
-	default:
-		dev_err(dev, "reg-io-width must be 1 or 4\n");
-		return ERR_PTR(-EINVAL);
-	}
-
 	ddc_node = of_parse_phandle(np, "ddc-i2c-bus", 0);
 	if (ddc_node) {
 		hdmi->ddc = of_get_i2c_adapter_by_node(ddc_node);
@@ -2011,11 +1991,38 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
 		dev_dbg(hdmi->dev, "no ddc property found\n");
 	}
 
-	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	hdmi->regs = devm_ioremap_resource(dev, iores);
-	if (IS_ERR(hdmi->regs)) {
-		ret = PTR_ERR(hdmi->regs);
-		goto err_res;
+	if (!plat_data->regm) {
+		const struct regmap_config *reg_config;
+
+		of_property_read_u32(np, "reg-io-width", &val);
+		switch (val) {
+		case 4:
+			reg_config = &hdmi_regmap_32bit_config;
+			hdmi->reg_shift = 2;
+			break;
+		case 1:
+			reg_config = &hdmi_regmap_8bit_config;
+			break;
+		default:
+			dev_err(dev, "reg-io-width must be 1 or 4\n");
+			return ERR_PTR(-EINVAL);
+		}
+
+		iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		hdmi->regs = devm_ioremap_resource(dev, iores);
+		if (IS_ERR(hdmi->regs)) {
+			ret = PTR_ERR(hdmi->regs);
+			goto err_res;
+		}
+
+		hdmi->regm = devm_regmap_init_mmio(dev, hdmi->regs, reg_config);
+		if (IS_ERR(hdmi->regm)) {
+			dev_err(dev, "Failed to configure regmap\n");
+			ret = PTR_ERR(hdmi->regm);
+			goto err_res;
+		}
+	} else {
+		hdmi->regm = plat_data->regm;
 	}
 
 	hdmi->isfr_clk = devm_clk_get(hdmi->dev, "isfr");
@@ -2123,7 +2130,7 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
 	config0 = hdmi_readb(hdmi, HDMI_CONFIG0_ID);
 	config3 = hdmi_readb(hdmi, HDMI_CONFIG3_ID);
 
-	if (config3 & HDMI_CONFIG3_AHBAUDDMA) {
+	if (iores && config3 & HDMI_CONFIG3_AHBAUDDMA) {
 		struct dw_hdmi_audio_data audio;
 
 		audio.phys = iores->start;
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index 735a8ab..163842d 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -60,6 +60,7 @@ struct dw_hdmi_plat_data {
 			     unsigned long mpixelclock);
 	enum drm_mode_status (*mode_valid)(struct drm_connector *connector,
 					   struct drm_display_mode *mode);
+	struct regmap *regm;
 };
 
 int dw_hdmi_probe(struct platform_device *pdev,
-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

WARNING: multiple messages have this Message-ID (diff)
From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 1/4] drm: bridge: dw-hdmi: Switch to regmap for register access
Date: Mon, 30 Jan 2017 12:05:15 +0100	[thread overview]
Message-ID: <1485774318-21916-2-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1485774318-21916-1-git-send-email-narmstrong@baylibre.com>

The Synopsys Designware HDMI TX Controller does not enforce register
access on platforms instanciating it. The current driver supports two
different types of memory-mapped flat register access, but in order to
support the Amlogic Meson SoCs integration, and provide a more generic
way to handle all sorts of register mapping, switch the register access
to use the regmap infrastructure.

In the case of registers that are not flat memory-mapped or do not
conform to the current driver implementation, a regmap struct can be
given in the plat_data and be used at probe or bind.

Since the AHB audio driver is only available with direct memory access,
only allow the I2S audio driver to be registered is directly
memory-mapped.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/gpu/drm/bridge/dw-hdmi.c | 109 +++++++++++++++++++++------------------
 include/drm/bridge/dw_hdmi.h     |   1 +
 2 files changed, 59 insertions(+), 51 deletions(-)

diff --git a/drivers/gpu/drm/bridge/dw-hdmi.c b/drivers/gpu/drm/bridge/dw-hdmi.c
index ca9d0ce..674ab05 100644
--- a/drivers/gpu/drm/bridge/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/dw-hdmi.c
@@ -19,6 +19,7 @@
 #include <linux/hdmi.h>
 #include <linux/mutex.h>
 #include <linux/of_device.h>
+#include <linux/regmap.h>
 #include <linux/spinlock.h>
 
 #include <drm/drm_of.h>
@@ -167,8 +168,8 @@ struct dw_hdmi {
 	unsigned int audio_n;
 	bool audio_enable;
 
-	void (*write)(struct dw_hdmi *hdmi, u8 val, int offset);
-	u8 (*read)(struct dw_hdmi *hdmi, int offset);
+	unsigned int reg_shift;
+	struct regmap *regm;
 };
 
 #define HDMI_IH_PHY_STAT0_RX_SENSE \
@@ -179,42 +180,23 @@ struct dw_hdmi {
 	(HDMI_PHY_RX_SENSE0 | HDMI_PHY_RX_SENSE1 | \
 	 HDMI_PHY_RX_SENSE2 | HDMI_PHY_RX_SENSE3)
 
-static void dw_hdmi_writel(struct dw_hdmi *hdmi, u8 val, int offset)
-{
-	writel(val, hdmi->regs + (offset << 2));
-}
-
-static u8 dw_hdmi_readl(struct dw_hdmi *hdmi, int offset)
-{
-	return readl(hdmi->regs + (offset << 2));
-}
-
-static void dw_hdmi_writeb(struct dw_hdmi *hdmi, u8 val, int offset)
-{
-	writeb(val, hdmi->regs + offset);
-}
-
-static u8 dw_hdmi_readb(struct dw_hdmi *hdmi, int offset)
-{
-	return readb(hdmi->regs + offset);
-}
-
 static inline void hdmi_writeb(struct dw_hdmi *hdmi, u8 val, int offset)
 {
-	hdmi->write(hdmi, val, offset);
+	regmap_write(hdmi->regm, offset << hdmi->reg_shift, val);
 }
 
 static inline u8 hdmi_readb(struct dw_hdmi *hdmi, int offset)
 {
-	return hdmi->read(hdmi, offset);
+	unsigned int val = 0;
+
+	regmap_read(hdmi->regm, offset << hdmi->reg_shift, &val);
+
+	return val;
 }
 
 static void hdmi_modb(struct dw_hdmi *hdmi, u8 data, u8 mask, unsigned reg)
 {
-	u8 val = hdmi_readb(hdmi, reg) & ~mask;
-
-	val |= data & mask;
-	hdmi_writeb(hdmi, val, reg);
+	regmap_update_bits(hdmi->regm, reg << hdmi->reg_shift, mask, data);
 }
 
 static void hdmi_mask_writeb(struct dw_hdmi *hdmi, u8 data, unsigned int reg,
@@ -1949,6 +1931,20 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
 	return 0;
 }
 
+static const struct regmap_config hdmi_regmap_8bit_config = {
+	.reg_bits	= 32,
+	.val_bits	= 8,
+	.reg_stride	= 1,
+	.max_register	= HDMI_I2CM_FS_SCL_LCNT_0_ADDR,
+};
+
+static const struct regmap_config hdmi_regmap_32bit_config = {
+	.reg_bits	= 32,
+	.val_bits	= 32,
+	.reg_stride	= 4,
+	.max_register	= HDMI_I2CM_FS_SCL_LCNT_0_ADDR << 2,
+};
+
 static struct dw_hdmi *
 __dw_hdmi_probe(struct platform_device *pdev,
 		const struct dw_hdmi_plat_data *plat_data)
@@ -1958,7 +1954,7 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
 	struct platform_device_info pdevinfo;
 	struct device_node *ddc_node;
 	struct dw_hdmi *hdmi;
-	struct resource *iores;
+	struct resource *iores = NULL;
 	int irq;
 	int ret;
 	u32 val = 1;
@@ -1982,22 +1978,6 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
 	mutex_init(&hdmi->audio_mutex);
 	spin_lock_init(&hdmi->audio_lock);
 
-	of_property_read_u32(np, "reg-io-width", &val);
-
-	switch (val) {
-	case 4:
-		hdmi->write = dw_hdmi_writel;
-		hdmi->read = dw_hdmi_readl;
-		break;
-	case 1:
-		hdmi->write = dw_hdmi_writeb;
-		hdmi->read = dw_hdmi_readb;
-		break;
-	default:
-		dev_err(dev, "reg-io-width must be 1 or 4\n");
-		return ERR_PTR(-EINVAL);
-	}
-
 	ddc_node = of_parse_phandle(np, "ddc-i2c-bus", 0);
 	if (ddc_node) {
 		hdmi->ddc = of_get_i2c_adapter_by_node(ddc_node);
@@ -2011,11 +1991,38 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
 		dev_dbg(hdmi->dev, "no ddc property found\n");
 	}
 
-	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	hdmi->regs = devm_ioremap_resource(dev, iores);
-	if (IS_ERR(hdmi->regs)) {
-		ret = PTR_ERR(hdmi->regs);
-		goto err_res;
+	if (!plat_data->regm) {
+		const struct regmap_config *reg_config;
+
+		of_property_read_u32(np, "reg-io-width", &val);
+		switch (val) {
+		case 4:
+			reg_config = &hdmi_regmap_32bit_config;
+			hdmi->reg_shift = 2;
+			break;
+		case 1:
+			reg_config = &hdmi_regmap_8bit_config;
+			break;
+		default:
+			dev_err(dev, "reg-io-width must be 1 or 4\n");
+			return ERR_PTR(-EINVAL);
+		}
+
+		iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		hdmi->regs = devm_ioremap_resource(dev, iores);
+		if (IS_ERR(hdmi->regs)) {
+			ret = PTR_ERR(hdmi->regs);
+			goto err_res;
+		}
+
+		hdmi->regm = devm_regmap_init_mmio(dev, hdmi->regs, reg_config);
+		if (IS_ERR(hdmi->regm)) {
+			dev_err(dev, "Failed to configure regmap\n");
+			ret = PTR_ERR(hdmi->regm);
+			goto err_res;
+		}
+	} else {
+		hdmi->regm = plat_data->regm;
 	}
 
 	hdmi->isfr_clk = devm_clk_get(hdmi->dev, "isfr");
@@ -2123,7 +2130,7 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
 	config0 = hdmi_readb(hdmi, HDMI_CONFIG0_ID);
 	config3 = hdmi_readb(hdmi, HDMI_CONFIG3_ID);
 
-	if (config3 & HDMI_CONFIG3_AHBAUDDMA) {
+	if (iores && config3 & HDMI_CONFIG3_AHBAUDDMA) {
 		struct dw_hdmi_audio_data audio;
 
 		audio.phys = iores->start;
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index 735a8ab..163842d 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -60,6 +60,7 @@ struct dw_hdmi_plat_data {
 			     unsigned long mpixelclock);
 	enum drm_mode_status (*mode_valid)(struct drm_connector *connector,
 					   struct drm_display_mode *mode);
+	struct regmap *regm;
 };
 
 int dw_hdmi_probe(struct platform_device *pdev,
-- 
1.9.1

  reply	other threads:[~2017-01-30 11:07 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-30 11:05 [PATCH 0/4] drm: bridge: dw-hdmi: Add support for Custom PHYs Neil Armstrong
2017-01-30 11:05 ` Neil Armstrong
2017-01-30 11:05 ` Neil Armstrong
2017-01-30 11:05 ` Neil Armstrong [this message]
2017-01-30 11:05   ` [PATCH 1/4] drm: bridge: dw-hdmi: Switch to regmap for register access Neil Armstrong
2017-01-30 11:05   ` Neil Armstrong
2017-01-30 11:05 ` [PATCH 2/4] drm: bridge: dw-hdmi: Add support for custom PHY handling Neil Armstrong
2017-01-30 11:05   ` Neil Armstrong
2017-01-30 11:05   ` Neil Armstrong
2017-01-30 11:05 ` [PATCH 3/4] drm: bridge: dw-hdmi: Enable CSC even for DVI Neil Armstrong
2017-01-30 11:05   ` Neil Armstrong
2017-01-30 11:05   ` Neil Armstrong
2017-01-30 11:05 ` [PATCH 4/4] drm: bridge: dw-hdmi: Take input format from plat_data Neil Armstrong
2017-01-30 11:05   ` Neil Armstrong
2017-01-30 11:05   ` Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1485774318-21916-2-git-send-email-narmstrong@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=Jose.Abreu@synopsys.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=laurent.pinchart+renesas@ideasonboard.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.