All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jon Mason <jon.mason@broadcom.com>
To: David Miller <davem@davemloft.net>
Cc: rafal@milecki.pl, bcm-kernel-feedback-list@broadcom.com,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/3] net: ethernet: bgmac: unify code of the same family
Date: Fri,  3 Feb 2017 16:39:29 -0500	[thread overview]
Message-ID: <1486157970-6315-3-git-send-email-jon.mason@broadcom.com> (raw)
In-Reply-To: <1486157970-6315-1-git-send-email-jon.mason@broadcom.com>

BCM471X and BCM535X are of the same family (from what I can derive from
internal documents).  Group them into the case statement together, which
results in more code reuse.

Also, use existing helper variables to make the code a little more
readable too.

Signed-off-by: Jon Mason <jon.mason@broadcom.com>
---
 drivers/net/ethernet/broadcom/bgmac-bcma.c | 64 +++++++++++++-----------------
 1 file changed, 28 insertions(+), 36 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bgmac-bcma.c b/drivers/net/ethernet/broadcom/bgmac-bcma.c
index 5ef60d4..f5c27f4 100644
--- a/drivers/net/ethernet/broadcom/bgmac-bcma.c
+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c
@@ -192,36 +192,50 @@ static int bgmac_probe(struct bcma_device *core)
 		goto err1;
 	}
 
-	bgmac->has_robosw = !!(core->bus->sprom.boardflags_lo &
-			       BGMAC_BFL_ENETROBO);
+	bgmac->has_robosw = !!(sprom->boardflags_lo & BGMAC_BFL_ENETROBO);
 	if (bgmac->has_robosw)
 		dev_warn(bgmac->dev, "Support for Roboswitch not implemented\n");
 
-	if (core->bus->sprom.boardflags_lo & BGMAC_BFL_ENETADM)
+	if (sprom->boardflags_lo & BGMAC_BFL_ENETADM)
 		dev_warn(bgmac->dev, "Support for ADMtek ethernet switch not implemented\n");
 
 	/* Feature Flags */
-	switch (core->bus->chipinfo.id) {
+	switch (ci->id) {
+	/* BCM 471X/535X family */
+	case BCMA_CHIP_ID_BCM4716:
+		bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
+		/* fallthrough */
+	case BCMA_CHIP_ID_BCM47162:
+		bgmac->feature_flags |= BGMAC_FEAT_FLW_CTRL2;
+		bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK;
+		break;
 	case BCMA_CHIP_ID_BCM5357:
+	case BCMA_CHIP_ID_BCM53572:
 		bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK;
 		bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
 		bgmac->feature_flags |= BGMAC_FEAT_FLW_CTRL1;
 		bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_PHY;
-		if (core->bus->chipinfo.pkg == BCMA_PKG_ID_BCM47186) {
-			bgmac->feature_flags |= BGMAC_FEAT_IOST_ATTACHED;
+		if (ci->pkg == BCMA_PKG_ID_BCM47188 ||
+		    ci->pkg == BCMA_PKG_ID_BCM47186) {
 			bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_RGMII;
+			bgmac->feature_flags |= BGMAC_FEAT_IOST_ATTACHED;
 		}
-		if (core->bus->chipinfo.pkg == BCMA_PKG_ID_BCM5358)
+		if (ci->pkg == BCMA_PKG_ID_BCM5358)
 			bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_EPHYRMII;
 		break;
-	case BCMA_CHIP_ID_BCM53572:
-		bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK;
+	case BCMA_CHIP_ID_BCM53573:
 		bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
-		bgmac->feature_flags |= BGMAC_FEAT_FLW_CTRL1;
-		bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_PHY;
-		if (core->bus->chipinfo.pkg == BCMA_PKG_ID_BCM47188) {
-			bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_RGMII;
+		bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK;
+		if (ci->pkg == BCMA_PKG_ID_BCM47189)
 			bgmac->feature_flags |= BGMAC_FEAT_IOST_ATTACHED;
+		if (core->core_unit == 0) {
+			bgmac->feature_flags |= BGMAC_FEAT_CC4_IF_SW_TYPE;
+			if (ci->pkg == BCMA_PKG_ID_BCM47189)
+				bgmac->feature_flags |=
+					BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII;
+		} else if (core->core_unit == 1) {
+			bgmac->feature_flags |= BGMAC_FEAT_IRQ_ID_OOB_6;
+			bgmac->feature_flags |= BGMAC_FEAT_CC7_IF_TYPE_RGMII;
 		}
 		break;
 	case BCMA_CHIP_ID_BCM4749:
@@ -229,18 +243,11 @@ static int bgmac_probe(struct bcma_device *core)
 		bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
 		bgmac->feature_flags |= BGMAC_FEAT_FLW_CTRL1;
 		bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_PHY;
-		if (core->bus->chipinfo.pkg == 10) {
+		if (ci->pkg == 10) {
 			bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_RGMII;
 			bgmac->feature_flags |= BGMAC_FEAT_IOST_ATTACHED;
 		}
 		break;
-	case BCMA_CHIP_ID_BCM4716:
-		bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
-		/* fallthrough */
-	case BCMA_CHIP_ID_BCM47162:
-		bgmac->feature_flags |= BGMAC_FEAT_FLW_CTRL2;
-		bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK;
-		break;
 	/* bcm4707_family */
 	case BCMA_CHIP_ID_BCM4707:
 	case BCMA_CHIP_ID_BCM47094:
@@ -249,21 +256,6 @@ static int bgmac_probe(struct bcma_device *core)
 		bgmac->feature_flags |= BGMAC_FEAT_NO_RESET;
 		bgmac->feature_flags |= BGMAC_FEAT_FORCE_SPEED_2500;
 		break;
-	case BCMA_CHIP_ID_BCM53573:
-		bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
-		bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK;
-		if (ci->pkg == BCMA_PKG_ID_BCM47189)
-			bgmac->feature_flags |= BGMAC_FEAT_IOST_ATTACHED;
-		if (core->core_unit == 0) {
-			bgmac->feature_flags |= BGMAC_FEAT_CC4_IF_SW_TYPE;
-			if (ci->pkg == BCMA_PKG_ID_BCM47189)
-				bgmac->feature_flags |=
-					BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII;
-		} else if (core->core_unit == 1) {
-			bgmac->feature_flags |= BGMAC_FEAT_IRQ_ID_OOB_6;
-			bgmac->feature_flags |= BGMAC_FEAT_CC7_IF_TYPE_RGMII;
-		}
-		break;
 	default:
 		bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
 		bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK;
-- 
2.7.4

  parent reply	other threads:[~2017-02-03 21:40 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-03 21:39 [PATCH net-next 0/3] net: ethernet: bgmac: PM support and clean-ups Jon Mason
2017-02-03 21:39 ` [PATCH 1/3] net: ethernet: bgmac: use #defines for MAX size Jon Mason
2017-02-03 21:39 ` Jon Mason [this message]
2017-02-03 21:48   ` [PATCH 2/3] net: ethernet: bgmac: unify code of the same family Rafał Miłecki
2017-02-03 22:35     ` Jon Mason
2017-02-03 21:39 ` [PATCH 3/3] net: ethernet: bgmac: driver power manangement Jon Mason
2017-02-04  2:16   ` Florian Fainelli
2017-02-06 16:30     ` Jon Mason

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1486157970-6315-3-git-send-email-jon.mason@broadcom.com \
    --to=jon.mason@broadcom.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=rafal@milecki.pl \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.