* [Qemu-devel] [PATCH v7 0/2] docs: Improve sample configuration files
@ 2017-02-10 17:25 Andrea Bolognani
2017-02-10 17:25 ` [Qemu-devel] [PATCH v7 1/2] q35: " Andrea Bolognani
2017-02-10 17:25 ` [Qemu-devel] [PATCH v7 2/2] mach-virt: Provide " Andrea Bolognani
0 siblings, 2 replies; 6+ messages in thread
From: Andrea Bolognani @ 2017-02-10 17:25 UTC (permalink / raw)
To: qemu-devel; +Cc: marcel, drjones, lersek, kraxel
Changes since [v6]
* Address review comments:
- re-introduce optical media support;
- rename PCIe Root Ports from pci.* to pcie.*;
- remove reference to GTK+.
Changes since [v5]
* Address review comments:
- use the native serial console rather than the VirtIO
based one, and enable monitor multiplexing so that
the user can switch between the two;
- add GIC version configuration;
- improve wording all over the place.
* Improvements:
- add information about Debian/Ubuntu firmware
packages.
Changes since [v4]
* Improvements:
- move storage configuration from the command line
to the configuration files so that the command
line is shorter and we can provide better
documentation for the various parts;
- configure the amount of memory for the guest in
the file too;
- document the fact that you might want/need to use
'-serial stdio' and '-display vnc=...' in some
situations;
- fix the value of 'port' for one of the
pcie-root-port devices;
- fix some inaccurate comments.
* Arguably the opposite:
- remove the sample command line for running a live
OS from the file header. I could be convinced to
add it back as a (commented) section about it, if
people think it's useful enough.
Changes since [v3]
* Address review comments:
- place VGA at 00:01.0;
- use pcie-root-port instead of ioh3420 in
q35-virtio-*.cfg;
- add a comment to let users know that PCI Express
devices should not be placed on the legacy PCI
bridge.
Changes since [v2]
* Address review comments:
- use -nodefaults in q35-emulated.cfg too;
- add explicit VGA and Ethernet.
* Improvements:
- use virtconsole and virtio-serial instead of
isa-serial in q35-virtio-serial.cfg.
* Possibily controversial:
- get rid of q35-virtio-common.cfg and add the PCIe
Root Ports back into q35-virtio-*.cfg: while this
leads to having some duplicated content, I feel like
the sample configurations are much more useful when
they can stand entirely on their own, especially now
that they start with a detailed hardware listing.
* Cosmetic stuff:
- hardware listing looks like the output of lspci;
- section names match what's used in the hardware
listing so it's faster to jump to the section;
- PCI addresses also match the output of lspci;
- PCI Express is used instead of PCIe.
Changes since [v1]
* Address review comments:
- improve the existing configuration file instead
of removing it;
- split off the common part for VirtIO guests;
- plug all ioh3420 devices in a single slot;
- use slot 1c for ioh3420 devices;
- remove useless USB keyboard.
* Improve usage description:
- make sure the OS disk actually uses the VirtIO
SCSI controller, as intended, rather than the
built-in SATA one;
- provide a command line for running live CDs.
* Document more devices:
- the video card is added by default;
- so is the Ethernet adapter, apparently.
[v1] http://lists.nongnu.org/archive/html/qemu-devel/2017-01/msg06342.html
[v2] http://lists.nongnu.org/archive/html/qemu-devel/2017-02/msg00184.html
[v3] http://lists.nongnu.org/archive/html/qemu-devel/2017-02/msg00461.html
[v4] http://lists.nongnu.org/archive/html/qemu-devel/2017-02/msg00672.html
[v5] http://lists.nongnu.org/archive/html/qemu-devel/2017-02/msg01714.html
[v6] http://lists.nongnu.org/archive/html/qemu-devel/2017-02/msg02206.html
Andrea Bolognani (2):
q35: Improve sample configuration files
mach-virt: Provide sample configuration files
docs/mach-virt-graphical.cfg | 281 +++++++++++++++++++++++++++++++++++++++++
docs/mach-virt-serial.cfg | 243 +++++++++++++++++++++++++++++++++++
docs/q35-chipset.cfg | 152 ----------------------
docs/q35-emulated.cfg | 288 ++++++++++++++++++++++++++++++++++++++++++
docs/q35-virtio-graphical.cfg | 248 ++++++++++++++++++++++++++++++++++++
docs/q35-virtio-serial.cfg | 193 ++++++++++++++++++++++++++++
6 files changed, 1253 insertions(+), 152 deletions(-)
create mode 100644 docs/mach-virt-graphical.cfg
create mode 100644 docs/mach-virt-serial.cfg
delete mode 100644 docs/q35-chipset.cfg
create mode 100644 docs/q35-emulated.cfg
create mode 100644 docs/q35-virtio-graphical.cfg
create mode 100644 docs/q35-virtio-serial.cfg
--
2.7.4
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Qemu-devel] [PATCH v7 1/2] q35: Improve sample configuration files
2017-02-10 17:25 [Qemu-devel] [PATCH v7 0/2] docs: Improve sample configuration files Andrea Bolognani
@ 2017-02-10 17:25 ` Andrea Bolognani
2017-02-12 18:35 ` Marcel Apfelbaum
2017-02-10 17:25 ` [Qemu-devel] [PATCH v7 2/2] mach-virt: Provide " Andrea Bolognani
1 sibling, 1 reply; 6+ messages in thread
From: Andrea Bolognani @ 2017-02-10 17:25 UTC (permalink / raw)
To: qemu-devel; +Cc: marcel, drjones, lersek, kraxel
Instead of having a single sample configuration file,
we now have several:
* q35-emulated.cfg documents the default devices QEMU
adds to a q35 guest and the additional devices that
are pretty much guaranteed to be present in a
physical q35-based machine;
* q35-virtio-graphical.cfg can be used to start a
fully-featured (USB, graphical console, audio, etc.)
guest that uses VirtIO instead of emulated devices;
* q35-virtio-serial.cfg is similar but has a minimal
set of devices and uses the serial console.
All configuration files are fully commented and neatly
organized.
---
docs/q35-chipset.cfg | 152 ----------------------
docs/q35-emulated.cfg | 288 ++++++++++++++++++++++++++++++++++++++++++
docs/q35-virtio-graphical.cfg | 248 ++++++++++++++++++++++++++++++++++++
docs/q35-virtio-serial.cfg | 193 ++++++++++++++++++++++++++++
4 files changed, 729 insertions(+), 152 deletions(-)
delete mode 100644 docs/q35-chipset.cfg
create mode 100644 docs/q35-emulated.cfg
create mode 100644 docs/q35-virtio-graphical.cfg
create mode 100644 docs/q35-virtio-serial.cfg
diff --git a/docs/q35-chipset.cfg b/docs/q35-chipset.cfg
deleted file mode 100644
index e4ddb7d..0000000
--- a/docs/q35-chipset.cfg
+++ /dev/null
@@ -1,152 +0,0 @@
-################################################################
-#
-# qemu -M q35 creates a bare machine with just the very essential
-# chipset devices being present:
-#
-# 00.0 - Host bridge
-# 1f.0 - ISA bridge / LPC
-# 1f.2 - SATA (AHCI) controller
-# 1f.3 - SMBus controller
-#
-# This config file documents the other devices and how they are
-# created. You can simply use "-readconfig $thisfile" to create
-# them all. Here is a overview:
-#
-# 19.0 - Ethernet controller (not created, our e1000 emulation
-# doesn't emulate the ich9 device).
-# 1a.* - USB Controller #2 (ehci + uhci companions)
-# 1b.0 - HD Audio Controller
-# 1c.* - PCI Express Ports
-# 1d.* - USB Controller #1 (ehci + uhci companions,
-# "qemu -M q35 -usb" creates these too)
-# 1e.0 - PCI Bridge
-#
-
-[device "ich9-ehci-2"]
- driver = "ich9-usb-ehci2"
- multifunction = "on"
- bus = "pcie.0"
- addr = "1a.7"
-
-[device "ich9-uhci-4"]
- driver = "ich9-usb-uhci4"
- multifunction = "on"
- bus = "pcie.0"
- addr = "1a.0"
- masterbus = "ich9-ehci-2.0"
- firstport = "0"
-
-[device "ich9-uhci-5"]
- driver = "ich9-usb-uhci5"
- multifunction = "on"
- bus = "pcie.0"
- addr = "1a.1"
- masterbus = "ich9-ehci-2.0"
- firstport = "2"
-
-[device "ich9-uhci-6"]
- driver = "ich9-usb-uhci6"
- multifunction = "on"
- bus = "pcie.0"
- addr = "1a.2"
- masterbus = "ich9-ehci-2.0"
- firstport = "4"
-
-
-[device "ich9-hda-audio"]
- driver = "ich9-intel-hda"
- bus = "pcie.0"
- addr = "1b.0"
-
-
-[device "ich9-pcie-port-1"]
- driver = "ioh3420"
- multifunction = "on"
- bus = "pcie.0"
- addr = "1c.0"
- port = "1"
- chassis = "1"
-
-[device "ich9-pcie-port-2"]
- driver = "ioh3420"
- multifunction = "on"
- bus = "pcie.0"
- addr = "1c.1"
- port = "2"
- chassis = "2"
-
-[device "ich9-pcie-port-3"]
- driver = "ioh3420"
- multifunction = "on"
- bus = "pcie.0"
- addr = "1c.2"
- port = "3"
- chassis = "3"
-
-[device "ich9-pcie-port-4"]
- driver = "ioh3420"
- multifunction = "on"
- bus = "pcie.0"
- addr = "1c.3"
- port = "4"
- chassis = "4"
-
-##
-# Example PCIe switch with two downstream ports
-#
-#[device "pcie-switch-upstream-port-1"]
-# driver = "x3130-upstream"
-# bus = "ich9-pcie-port-4"
-# addr = "00.0"
-#
-#[device "pcie-switch-downstream-port-1-1"]
-# driver = "xio3130-downstream"
-# multifunction = "on"
-# bus = "pcie-switch-upstream-port-1"
-# addr = "00.0"
-# port = "1"
-# chassis = "5"
-#
-#[device "pcie-switch-downstream-port-1-2"]
-# driver = "xio3130-downstream"
-# multifunction = "on"
-# bus = "pcie-switch-upstream-port-1"
-# addr = "00.1"
-# port = "1"
-# chassis = "6"
-
-[device "ich9-ehci-1"]
- driver = "ich9-usb-ehci1"
- multifunction = "on"
- bus = "pcie.0"
- addr = "1d.7"
-
-[device "ich9-uhci-1"]
- driver = "ich9-usb-uhci1"
- multifunction = "on"
- bus = "pcie.0"
- addr = "1d.0"
- masterbus = "ich9-ehci-1.0"
- firstport = "0"
-
-[device "ich9-uhci-2"]
- driver = "ich9-usb-uhci2"
- multifunction = "on"
- bus = "pcie.0"
- addr = "1d.1"
- masterbus = "ich9-ehci-1.0"
- firstport = "2"
-
-[device "ich9-uhci-3"]
- driver = "ich9-usb-uhci3"
- multifunction = "on"
- bus = "pcie.0"
- addr = "1d.2"
- masterbus = "ich9-ehci-1.0"
- firstport = "4"
-
-
-[device "ich9-pci-bridge"]
- driver = "i82801b11-bridge"
- bus = "pcie.0"
- addr = "1e.0"
diff --git a/docs/q35-emulated.cfg b/docs/q35-emulated.cfg
new file mode 100644
index 0000000..c6416d6
--- /dev/null
+++ b/docs/q35-emulated.cfg
@@ -0,0 +1,288 @@
+# q35 - Emulated guest (graphical console)
+# =========================================================
+#
+# Usage:
+#
+# $ qemu-system-x86_64 \
+# -nodefaults \
+# -readconfig q35-emulated.cfg
+#
+# You will probably need to tweak the lines marked as
+# CHANGE ME before being able to use this configuration!
+#
+# The guest will have a selection of emulated devices that
+# closely resembles that of a physical machine, and will be
+# accessed through a graphical console.
+#
+# ---------------------------------------------------------
+#
+# Using -nodefaults is required to have full control over
+# the virtual hardware: when it's specified, QEMU will
+# populate the board with only the builtin peripherals
+# plus a small selection of core PCI devices and
+# controllers; the user will then have to explicitly add
+# further devices.
+#
+# The core PCI devices show up in the guest as:
+#
+# 00:00.0 Host bridge
+# 00:1f.0 ISA bridge / LPC
+# 00:1f.2 SATA (AHCI) controller
+# 00:1f.3 SMBus controller
+#
+# This configuration file adds a number of devices that
+# are pretty much guaranteed to be present in every single
+# physical machine based on q35, more specifically:
+#
+# 00:01.0 VGA compatible controller
+# 00:19.0 Ethernet controller
+# 00:1a.* USB controller (#2)
+# 00:1b.0 Audio device
+# 00:1c.* PCI bridge (PCI Express Root Ports)
+# 00:1d.* USB Controller (#1)
+# 00:1e.0 PCI bridge (legacy PCI bridge)
+#
+# More information about these devices is available below.
+
+
+# Machine options
+# =========================================================
+#
+# We use the q35 machine type and enable KVM acceleration
+# for better performance.
+#
+# Using less than 1 GiB of memory is probably not going to
+# yield good performance in the guest, and might even lead
+# to obscure boot issues in some cases.
+#
+# Unfortunately, there is no way to configure the CPU model
+# in this file, so it will have to be provided on the
+# command line.
+
+[machine]
+ type = "q35"
+ accel = "kvm"
+
+[memory]
+ size = "1024"
+
+
+# PCI bridge (PCI Express Root Ports)
+# =========================================================
+#
+# We add four PCI Express Root Ports, all sharing the same
+# slot on the PCI Express Root Bus. These ports support
+# hotplug.
+
+[device "ich9-pcie-port-1"]
+ driver = "ioh3420"
+ multifunction = "on"
+ bus = "pcie.0"
+ addr = "1c.0"
+ port = "1"
+ chassis = "1"
+
+[device "ich9-pcie-port-2"]
+ driver = "ioh3420"
+ multifunction = "on"
+ bus = "pcie.0"
+ addr = "1c.1"
+ port = "2"
+ chassis = "2"
+
+[device "ich9-pcie-port-3"]
+ driver = "ioh3420"
+ multifunction = "on"
+ bus = "pcie.0"
+ addr = "1c.2"
+ port = "3"
+ chassis = "3"
+
+[device "ich9-pcie-port-4"]
+ driver = "ioh3420"
+ multifunction = "on"
+ bus = "pcie.0"
+ addr = "1c.3"
+ port = "4"
+ chassis = "4"
+
+
+# PCI bridge (legacy PCI bridge)
+# =========================================================
+#
+# This bridge can be used to build an independent topology
+# for legacy PCI devices. PCI Express devices should be
+# plugged into PCI Express slots instead, so ideally there
+# will be no devices connected to this bridge.
+
+[device "ich9-pci-bridge"]
+ driver = "i82801b11-bridge"
+ bus = "pcie.0"
+ addr = "1e.0"
+
+
+# SATA storage
+# =========================================================
+#
+# An implicit SATA controller is created automatically for
+# every single q35 guest; here we create a disk, backed by
+# a qcow2 disk image on the host's filesystem, and attach
+# it to that controller so that the guest can use it.
+#
+# We also create an optical disk, mostly for installation
+# purposes: once the guest OS has been succesfully
+# installed, the guest will no longer boot from optical
+# media. If you don't want, or no longer want, to have an
+# optical disk in the guest you can safely comment out
+# all relevant sections below.
+
+[device "sata-disk"]
+ driver = "ide-hd"
+ bus = "ide.0"
+ drive = "disk"
+ bootindex = "1"
+
+[drive "disk"]
+ file = "guest.qcow2" # CHANGE ME
+ format = "qcow2"
+ if = "none"
+
+[device "sata-optical-disk"]
+ driver = "ide-cd"
+ bus = "ide.1"
+ drive = "optical-disk"
+ bootindex = "2"
+
+[drive "optical-disk"]
+ file = "install.iso" # CHANGE ME
+ format = "raw"
+ if = "none"
+
+
+# USB controller (#1)
+# =========================================================
+#
+# EHCI controller + UHCI companion controllers.
+
+[device "ich9-ehci-1"]
+ driver = "ich9-usb-ehci1"
+ multifunction = "on"
+ bus = "pcie.0"
+ addr = "1d.7"
+
+[device "ich9-uhci-1"]
+ driver = "ich9-usb-uhci1"
+ multifunction = "on"
+ bus = "pcie.0"
+ addr = "1d.0"
+ masterbus = "ich9-ehci-1.0"
+ firstport = "0"
+
+[device "ich9-uhci-2"]
+ driver = "ich9-usb-uhci2"
+ multifunction = "on"
+ bus = "pcie.0"
+ addr = "1d.1"
+ masterbus = "ich9-ehci-1.0"
+ firstport = "2"
+
+[device "ich9-uhci-3"]
+ driver = "ich9-usb-uhci3"
+ multifunction = "on"
+ bus = "pcie.0"
+ addr = "1d.2"
+ masterbus = "ich9-ehci-1.0"
+ firstport = "4"
+
+
+# USB controller (#2)
+# =========================================================
+#
+# EHCI controller + UHCI companion controllers.
+
+[device "ich9-ehci-2"]
+ driver = "ich9-usb-ehci2"
+ multifunction = "on"
+ bus = "pcie.0"
+ addr = "1a.7"
+
+[device "ich9-uhci-4"]
+ driver = "ich9-usb-uhci4"
+ multifunction = "on"
+ bus = "pcie.0"
+ addr = "1a.0"
+ masterbus = "ich9-ehci-2.0"
+ firstport = "0"
+
+[device "ich9-uhci-5"]
+ driver = "ich9-usb-uhci5"
+ multifunction = "on"
+ bus = "pcie.0"
+ addr = "1a.1"
+ masterbus = "ich9-ehci-2.0"
+ firstport = "2"
+
+[device "ich9-uhci-6"]
+ driver = "ich9-usb-uhci6"
+ multifunction = "on"
+ bus = "pcie.0"
+ addr = "1a.2"
+ masterbus = "ich9-ehci-2.0"
+ firstport = "4"
+
+
+# Ethernet controller
+# =========================================================
+#
+# We add a Gigabit Ethernet interface to the guest; on the
+# host side, we take advantage of user networking so that
+# the QEMU process doesn't require any additional
+# privileges.
+
+[netdev "hostnet"]
+ type = "user"
+
+[device "net"]
+ driver = "e1000"
+ netdev = "hostnet"
+ bus = "pcie.0"
+ addr = "19.0"
+
+
+# VGA compatible controller
+# =========================================================
+#
+# We use stdvga instead of Cirrus as it supports more video
+# modes and is closer to what actual hardware looks like.
+#
+# If you're running the guest on a remote, potentially
+# headless host, you will probably want to append something
+# like
+#
+# -display vnc=127.0.0.1:0
+#
+# to the command line in order to prevent QEMU from
+# creating a graphical display window on the host and
+# enable remote access instead.
+
+[device "video"]
+ driver = "VGA"
+ bus = "pcie.0"
+ addr = "01.0"
+
+
+# Audio device
+# =========================================================
+#
+# The sound card is a legacy PCI device that is plugged
+# directly into the PCI Express Root Bus.
+
+[device "ich9-hda-audio"]
+ driver = "ich9-intel-hda"
+ bus = "pcie.0"
+ addr = "1b.0"
+
+[device "ich9-hda-duplex"]
+ driver = "hda-duplex"
+ bus = "ich9-hda-audio.0"
+ cad = "0"
diff --git a/docs/q35-virtio-graphical.cfg b/docs/q35-virtio-graphical.cfg
new file mode 100644
index 0000000..28bde2f
--- /dev/null
+++ b/docs/q35-virtio-graphical.cfg
@@ -0,0 +1,248 @@
+# q35 - VirtIO guest (graphical console)
+# =========================================================
+#
+# Usage:
+#
+# $ qemu-system-x86_64 \
+# -nodefaults \
+# -readconfig q35-virtio-graphical.cfg
+#
+# You will probably need to tweak the lines marked as
+# CHANGE ME before being able to use this configuration!
+#
+# The guest will have a selection of VirtIO devices
+# tailored towards optimal performance with modern guests,
+# and will be accessed through a graphical console.
+#
+# ---------------------------------------------------------
+#
+# Using -nodefaults is required to have full control over
+# the virtual hardware: when it's specified, QEMU will
+# populate the board with only the builtin peripherals
+# plus a small selection of core PCI devices and
+# controllers; the user will then have to explicitly add
+# further devices.
+#
+# The core PCI devices show up in the guest as:
+#
+# 00:00.0 Host bridge
+# 00:1f.0 ISA bridge / LPC
+# 00:1f.2 SATA (AHCI) controller
+# 00:1f.3 SMBus controller
+#
+# This configuration file adds a number of other useful
+# devices, more specifically:
+#
+# 00:01.0 VGA compatible controller
+# 00:1b.0 Audio device
+# 00.1c.* PCI bridge (PCI Express Root Ports)
+# 01:00.0 SCSI storage controller
+# 02:00.0 Ethernet controller
+# 03:00.0 USB controller
+#
+# More information about these devices is available below.
+
+
+# Machine options
+# =========================================================
+#
+# We use the q35 machine type and enable KVM acceleration
+# for better performance.
+#
+# Using less than 1 GiB of memory is probably not going to
+# yield good performance in the guest, and might even lead
+# to obscure boot issues in some cases.
+
+[machine]
+ type = "q35"
+ accel = "kvm"
+
+[memory]
+ size = "1024"
+
+
+# PCI bridge (PCI Express Root Ports)
+# =========================================================
+#
+# We create eight PCI Express Root Ports, and we plug them
+# all into separate functions of the same slot. Some of
+# them will be used by devices, the rest will remain
+# available for hotplug.
+
+[device "pcie.1"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.0"
+ port = "1"
+ chassis = "1"
+ multifunction = "on"
+
+[device "pcie.2"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.1"
+ port = "2"
+ chassis = "2"
+
+[device "pcie.3"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.2"
+ port = "3"
+ chassis = "3"
+
+[device "pcie.4"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.3"
+ port = "4"
+ chassis = "4"
+
+[device "pcie.5"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.4"
+ port = "5"
+ chassis = "5"
+
+[device "pcie.6"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.5"
+ port = "6"
+ chassis = "6"
+
+[device "pcie.7"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.6"
+ port = "7"
+ chassis = "7"
+
+[device "pcie.8"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.7"
+ port = "8"
+ chassis = "8"
+
+
+# SCSI storage controller (and storage)
+# =========================================================
+#
+# We use virtio-scsi here so that we can (hot)plug a large
+# number of disks without running into issues; a SCSI disk,
+# backed by a qcow2 disk image on the host's filesystem, is
+# attached to it.
+#
+# We also create an optical disk, mostly for installation
+# purposes: once the guest OS has been succesfully
+# installed, the guest will no longer boot from optical
+# media. If you don't want, or no longer want, to have an
+# optical disk in the guest you can safely comment out
+# all relevant sections below.
+
+[device "scsi"]
+ driver = "virtio-scsi-pci"
+ bus = "pcie.1"
+ addr = "00.0"
+
+[device "scsi-disk"]
+ driver = "scsi-hd"
+ bus = "scsi.0"
+ drive = "disk"
+ bootindex = "1"
+
+[drive "disk"]
+ file = "guest.qcow2" # CHANGE ME
+ format = "qcow2"
+ if = "none"
+
+[device "scsi-optical-disk"]
+ driver = "scsi-cd"
+ bus = "scsi.0"
+ drive = "optical-disk"
+ bootindex = "2"
+
+[drive "optical-disk"]
+ file = "install.iso" # CHANGE ME
+ format = "raw"
+ if = "none"
+
+
+# Ethernet controller
+# =========================================================
+#
+# We use virtio-net for improved performance over emulated
+# hardware; on the host side, we take advantage of user
+# networking so that the QEMU process doesn't require any
+# additional privileges.
+
+[netdev "hostnet"]
+ type = "user"
+
+[device "net"]
+ driver = "virtio-net-pci"
+ netdev = "hostnet"
+ bus = "pcie.2"
+ addr = "00.0"
+
+
+# USB controller (and input devices)
+# =========================================================
+#
+# We add a virtualization-friendly USB 3.0 controller and
+# a USB tablet so that graphical guests can be controlled
+# appropriately. A USB keyboard is not needed, as q35
+# guests get a PS/2 one added automatically.
+
+[device "usb"]
+ driver = "nec-usb-xhci"
+ bus = "pcie.3"
+ addr = "00.0"
+
+[device "tablet"]
+ driver = "usb-tablet"
+ bus = "usb.0"
+
+
+# VGA compatible controller
+# =========================================================
+#
+# We plug the QXL video card directly into the PCI Express
+# Root Bus as it is a legacy PCI device; this way, we can
+# reduce the number of PCI Express controllers in the
+# guest.
+#
+# If you're running the guest on a remote, potentially
+# headless host, you will probably want to append something
+# like
+#
+# -display vnc=127.0.0.1:0
+#
+# to the command line in order to prevent QEMU from
+# creating a graphical display window on the host and
+# enable remote access instead.
+
+[device "video"]
+ driver = "qxl-vga"
+ bus = "pcie.0"
+ addr = "01.0"
+
+
+# Audio device
+# =========================================================
+#
+# Like the video card, the sound card is a legacy PCI
+# device and as such can be plugged directly into the PCI
+# Express Root Bus.
+
+[device "sound"]
+ driver = "ich9-intel-hda"
+ bus = "pcie.0"
+ addr = "1b.0"
+
+[device "duplex"]
+ driver = "hda-duplex"
+ bus = "sound.0"
+ cad = "0"
diff --git a/docs/q35-virtio-serial.cfg b/docs/q35-virtio-serial.cfg
new file mode 100644
index 0000000..c33c9cc
--- /dev/null
+++ b/docs/q35-virtio-serial.cfg
@@ -0,0 +1,193 @@
+# q35 - VirtIO guest (serial console)
+# =========================================================
+#
+# Usage:
+#
+# $ qemu-system-x86_64 \
+# -nodefaults \
+# -readconfig q35-virtio-serial.cfg \
+# -display none -serial mon:stdio
+#
+# You will probably need to tweak the lines marked as
+# CHANGE ME before being able to use this configuration!
+#
+# The guest will have a selection of VirtIO devices
+# tailored towards optimal performance with modern guests,
+# and will be accessed through the serial console.
+#
+# ---------------------------------------------------------
+#
+# Using -nodefaults is required to have full control over
+# the virtual hardware: when it's specified, QEMU will
+# populate the board with only the builtin peripherals
+# plus a small selection of core PCI devices and
+# controllers; the user will then have to explicitly add
+# further devices.
+#
+# The core PCI devices show up in the guest as:
+#
+# 00:00.0 Host bridge
+# 00:1f.0 ISA bridge / LPC
+# 00:1f.2 SATA (AHCI) controller
+# 00:1f.3 SMBus controller
+#
+# This configuration file adds a number of other useful
+# devices, more specifically:
+#
+# 00.1c.* PCI bridge (PCI Express Root Ports)
+# 01:00.0 SCSI storage controller
+# 02:00.0 Ethernet controller
+#
+# More information about these devices is available below.
+#
+# We use '-display none' to prevent QEMU from creating a
+# graphical display window, which would serve no use in
+# this specific configuration, and '-serial mon:stdio' to
+# multiplex the guest's serial console and the QEMU monitor
+# to the host's stdio; use 'Ctrl+A h' to learn how to
+# switch between the two and more.
+
+
+# Machine options
+# =========================================================
+#
+# We use the q35 machine type and enable KVM acceleration
+# for better performance.
+#
+# Using less than 1 GiB of memory is probably not going to
+# yield good performance in the guest, and might even lead
+# to obscure boot issues in some cases.
+
+[machine]
+ type = "q35"
+ accel = "kvm"
+
+[memory]
+ size = "1024"
+
+
+# PCI bridge (PCI Express Root Ports)
+# =========================================================
+#
+# We create eight PCI Express Root Ports, and we plug them
+# all into separate functions of the same slot. Some of
+# them will be used by devices, the rest will remain
+# available for hotplug.
+
+[device "pcie.1"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.0"
+ port = "1"
+ chassis = "1"
+ multifunction = "on"
+
+[device "pcie.2"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.1"
+ port = "2"
+ chassis = "2"
+
+[device "pcie.3"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.2"
+ port = "3"
+ chassis = "3"
+
+[device "pcie.4"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.3"
+ port = "4"
+ chassis = "4"
+
+[device "pcie.5"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.4"
+ port = "5"
+ chassis = "5"
+
+[device "pcie.6"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.5"
+ port = "6"
+ chassis = "6"
+
+[device "pcie.7"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.6"
+ port = "7"
+ chassis = "7"
+
+[device "pcie.8"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.7"
+ port = "8"
+ chassis = "8"
+
+
+# SCSI storage controller (and storage)
+# =========================================================
+#
+# We use virtio-scsi here so that we can (hot)plug a large
+# number of disks without running into issues; a SCSI disk,
+# backed by a qcow2 disk image on the host's filesystem, is
+# attached to it.
+#
+# We also create an optical disk, mostly for installation
+# purposes: once the guest OS has been succesfully
+# installed, the guest will no longer boot from optical
+# media. If you don't want, or no longer want, to have an
+# optical disk in the guest you can safely comment out
+# all relevant sections below.
+
+[device "scsi"]
+ driver = "virtio-scsi-pci"
+ bus = "pcie.1"
+ addr = "00.0"
+
+[device "scsi-disk"]
+ driver = "scsi-hd"
+ bus = "scsi.0"
+ drive = "disk"
+ bootindex = "1"
+
+[drive "disk"]
+ file = "guest.qcow2" # CHANGE ME
+ format = "qcow2"
+ if = "none"
+
+[device "scsi-optical-disk"]
+ driver = "scsi-cd"
+ bus = "scsi.0"
+ drive = "optical-disk"
+ bootindex = "2"
+
+[drive "optical-disk"]
+ file = "install.iso" # CHANGE ME
+ format = "raw"
+ if = "none"
+
+
+# Ethernet controller
+# =========================================================
+#
+# We use virtio-net for improved performance over emulated
+# hardware; on the host side, we take advantage of user
+# networking so that the QEMU process doesn't require any
+# additional privileges.
+
+[netdev "hostnet"]
+ type = "user"
+
+[device "net"]
+ driver = "virtio-net-pci"
+ netdev = "hostnet"
+ bus = "pcie.2"
+ addr = "00.0"
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [Qemu-devel] [PATCH v7 2/2] mach-virt: Provide sample configuration files
2017-02-10 17:25 [Qemu-devel] [PATCH v7 0/2] docs: Improve sample configuration files Andrea Bolognani
2017-02-10 17:25 ` [Qemu-devel] [PATCH v7 1/2] q35: " Andrea Bolognani
@ 2017-02-10 17:25 ` Andrea Bolognani
2017-02-10 17:53 ` Andrew Jones
2017-02-13 17:38 ` Laszlo Ersek
1 sibling, 2 replies; 6+ messages in thread
From: Andrea Bolognani @ 2017-02-10 17:25 UTC (permalink / raw)
To: qemu-devel; +Cc: marcel, drjones, lersek, kraxel
These are very much like the sample configuration files
for q35, and can be used both as documentation and as
a starting point for creating your own guest.
Two sample configuration files are provided:
* mach-virt-graphical.cfg can be used to start a
fully-featured (USB, graphical console, etc.)
guest that uses VirtIO devices;
* mach-virt-serial.cfg is similar but has a minimal
set of devices and uses the serial console.
All configuration files are fully commented and neatly
organized.
---
docs/mach-virt-graphical.cfg | 281 +++++++++++++++++++++++++++++++++++++++++++
docs/mach-virt-serial.cfg | 243 +++++++++++++++++++++++++++++++++++++
2 files changed, 524 insertions(+)
create mode 100644 docs/mach-virt-graphical.cfg
create mode 100644 docs/mach-virt-serial.cfg
diff --git a/docs/mach-virt-graphical.cfg b/docs/mach-virt-graphical.cfg
new file mode 100644
index 0000000..0fdf684
--- /dev/null
+++ b/docs/mach-virt-graphical.cfg
@@ -0,0 +1,281 @@
+# mach-virt - VirtIO guest (graphical console)
+# =========================================================
+#
+# Usage:
+#
+# $ qemu-system-aarch64 \
+# -nodefaults \
+# -readconfig mach-virt-graphical.cfg \
+# -cpu host
+#
+# You will probably need to tweak the lines marked as
+# CHANGE ME before being able to use this configuration!
+#
+# The guest will have a selection of VirtIO devices
+# tailored towards optimal performance with modern guests,
+# and will be accessed through a graphical console.
+#
+# ---------------------------------------------------------
+#
+# Using -nodefaults is required to have full control over
+# the virtual hardware: when it's specified, QEMU will
+# populate the board with only the builtin peripherals,
+# such as the PL011 UART, plus a PCI Express Root Bus; the
+# user will then have to explicitly add further devices.
+#
+# The PCI Express Root Bus shows up in the guest as:
+#
+# 00:00.0 Host bridge
+#
+# This configuration file adds a number of other useful
+# devices, more specifically:
+#
+# 00:01.0 Display controller
+# 00.1c.* PCI bridge (PCI Express Root Ports)
+# 01:00.0 SCSI storage controller
+# 02:00.0 Ethernet controller
+# 03:00.0 USB controller
+#
+# More information about these devices is available below.
+
+
+# Machine options
+# =========================================================
+#
+# We use the virt machine type and enable KVM acceleration
+# for better performance.
+#
+# Using less than 1 GiB of memory is probably not going to
+# yield good performance in the guest, and might even lead
+# to obscure boot issues in some cases.
+#
+# Unfortunately, there is no way to configure the CPU model
+# in this file, so it will have to be provided on the
+# command line, but we can configure the guest to use the
+# same GIC version as the host.
+
+[machine]
+ type = "virt"
+ accel = "kvm"
+ gic-version = "host"
+
+[memory]
+ size = "1024"
+
+
+# Firmware configuration
+# =========================================================
+#
+# There are two parts to the firmware: a read-only image
+# containing the executable code, which is shared between
+# guests, and a read/write variable store that is owned
+# by one specific guest, exclusively, and is used to
+# record information such as the UEFI boot order.
+#
+# For any new guest, its permanent, private variable store
+# should initially be copied from the template file
+# provided along with the firmware binary.
+#
+# Depending on the OS distribution you're using on the
+# host, the name of the package containing the firmware
+# binary and variable store template, as well as the paths
+# to the files themselves, will be different. For example:
+#
+# Fedora
+# edk2-aarch64 (pkg)
+# /usr/share/edk2/aarch64/QEMU_EFI-pflash.raw (bin)
+# /usr/share/edk2/aarch64/vars-template-pflash.raw (var)
+#
+# RHEL
+# AAVMF (pkg)
+# /usr/share/AAVMF/AAVMF_CODE.fd (bin)
+# /usr/share/AAVMF/AAVMF_VARS.fd (var)
+#
+# Debian/Ubuntu
+# qemu-efi (pkg)
+# /usr/share/AAVMF/AAVMF_CODE.fd (bin)
+# /usr/share/AAVMF/AAVMF_VARS.fd (var)
+
+[drive "uefi-binary"]
+ file = "/usr/share/AAVMF/AAVMF_CODE.fd" # CHANGE ME
+ format = "raw"
+ if = "pflash"
+ unit = "0"
+ readonly = "on"
+
+[drive "uefi-varstore"]
+ file = "guest_VARS.fd" # CHANGE ME
+ format = "raw"
+ if = "pflash"
+ unit = "1"
+
+
+# PCI bridge (PCI Express Root Ports)
+# =========================================================
+#
+# We create eight PCI Express Root Ports, and we plug them
+# all into separate functions of the same slot. Some of
+# them will be used by devices, the rest will remain
+# available for hotplug.
+
+[device "pcie.1"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.0"
+ port = "1"
+ chassis = "1"
+ multifunction = "on"
+
+[device "pcie.2"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.1"
+ port = "2"
+ chassis = "2"
+
+[device "pcie.3"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.2"
+ port = "3"
+ chassis = "3"
+
+[device "pcie.4"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.3"
+ port = "4"
+ chassis = "4"
+
+[device "pcie.5"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.4"
+ port = "5"
+ chassis = "5"
+
+[device "pcie.6"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.5"
+ port = "6"
+ chassis = "6"
+
+[device "pcie.7"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.6"
+ port = "7"
+ chassis = "7"
+
+[device "pcie.8"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.7"
+ port = "8"
+ chassis = "8"
+
+
+# SCSI storage controller (and storage)
+# =========================================================
+#
+# We use virtio-scsi here so that we can (hot)plug a large
+# number of disks without running into issues; a SCSI disk,
+# backed by a qcow2 disk image on the host's filesystem, is
+# attached to it.
+#
+# We also create an optical disk, mostly for installation
+# purposes: once the guest OS has been succesfully
+# installed, the guest will no longer boot from optical
+# media. If you don't want, or no longer want, to have an
+# optical disk in the guest you can safely comment out
+# all relevant sections below.
+
+[device "scsi"]
+ driver = "virtio-scsi-pci"
+ bus = "pcie.1"
+ addr = "00.0"
+
+[device "scsi-disk"]
+ driver = "scsi-hd"
+ bus = "scsi.0"
+ drive = "disk"
+ bootindex = "1"
+
+[drive "disk"]
+ file = "guest.qcow2" # CHANGE ME
+ format = "qcow2"
+ if = "none"
+
+[device "scsi-optical-disk"]
+ driver = "scsi-cd"
+ bus = "scsi.0"
+ drive = "optical-disk"
+ bootindex = "2"
+
+[drive "optical-disk"]
+ file = "install.iso" # CHANGE ME
+ format = "raw"
+ if = "none"
+
+
+# Ethernet controller
+# =========================================================
+#
+# We use virtio-net for improved performance over emulated
+# hardware; on the host side, we take advantage of user
+# networking so that the QEMU process doesn't require any
+# additional privileges.
+
+[netdev "hostnet"]
+ type = "user"
+
+[device "net"]
+ driver = "virtio-net-pci"
+ netdev = "hostnet"
+ bus = "pcie.2"
+ addr = "00.0"
+
+
+# USB controller (and input devices)
+# =========================================================
+#
+# We add a virtualization-friendly USB 3.0 controller and
+# a USB keyboard / USB tablet combo so that graphical
+# guests can be controlled appropriately.
+
+[device "usb"]
+ driver = "nec-usb-xhci"
+ bus = "pcie.3"
+ addr = "00.0"
+
+[device "keyboard"]
+ driver = "usb-kbd"
+ bus = "usb.0"
+
+[device "tablet"]
+ driver = "usb-tablet"
+ bus = "usb.0"
+
+
+# Display controller
+# =========================================================
+#
+# We use virtio-gpu because the legacy VGA framebuffer is
+# very troublesome on aarch64, and virtio-gpu is the only
+# video device that doesn't implement it.
+#
+# If you're running the guest on a remote, potentially
+# headless host, you will probably want to append something
+# like
+#
+# -display vnc=127.0.0.1:0
+#
+# to the command line in order to prevent QEMU from
+# creating a graphical display window on the host and
+# enable remote access instead.
+
+[device "video"]
+ driver = "virtio-gpu"
+ bus = "pcie.0"
+ addr = "01.0"
diff --git a/docs/mach-virt-serial.cfg b/docs/mach-virt-serial.cfg
new file mode 100644
index 0000000..aee9f1c
--- /dev/null
+++ b/docs/mach-virt-serial.cfg
@@ -0,0 +1,243 @@
+# mach-virt - VirtIO guest (serial console)
+# =========================================================
+#
+# Usage:
+#
+# $ qemu-system-aarch64 \
+# -nodefaults \
+# -readconfig mach-virt-serial.cfg \
+# -display none -serial mon:stdio \
+# -cpu host
+#
+# You will probably need to tweak the lines marked as
+# CHANGE ME before being able to use this configuration!
+#
+# The guest will have a selection of VirtIO devices
+# tailored towards optimal performance with modern guests,
+# and will be accessed through the serial console.
+#
+# ---------------------------------------------------------
+#
+# Using -nodefaults is required to have full control over
+# the virtual hardware: when it's specified, QEMU will
+# populate the board with only the builtin peripherals,
+# such as the PL011 UART, plus a PCI Express Root Bus; the
+# user will then have to explicitly add further devices.
+#
+# The PCI Express Root Bus shows up in the guest as:
+#
+# 00:00.0 Host bridge
+#
+# This configuration file adds a number of other useful
+# devices, more specifically:
+#
+# 00.1c.* PCI bridge (PCI Express Root Ports)
+# 01:00.0 SCSI storage controller
+# 02:00.0 Ethernet controller
+#
+# More information about these devices is available below.
+#
+# We use '-display none' to prevent QEMU from creating a
+# graphical display window, which would serve no use in
+# this specific configuration, and '-serial mon:stdio' to
+# multiplex the guest's serial console and the QEMU monitor
+# to the host's stdio; use 'Ctrl+A h' to learn how to
+# switch between the two and more.
+
+
+# Machine options
+# =========================================================
+#
+# We use the virt machine type and enable KVM acceleration
+# for better performance.
+#
+# Using less than 1 GiB of memory is probably not going to
+# yield good performance in the guest, and might even lead
+# to obscure boot issues in some cases.
+#
+# Unfortunately, there is no way to configure the CPU model
+# in this file, so it will have to be provided on the
+# command line, but we can configure the guest to use the
+# same GIC version as the host.
+
+[machine]
+ type = "virt"
+ accel = "kvm"
+ gic-version = "host"
+
+[memory]
+ size = "1024"
+
+
+# Firmware configuration
+# =========================================================
+#
+# There are two parts to the firmware: a read-only image
+# containing the executable code, which is shared between
+# guests, and a read/write variable store that is owned
+# by one specific guest, exclusively, and is used to
+# record information such as the UEFI boot order.
+#
+# For any new guest, its permanent, private variable store
+# should initially be copied from the template file
+# provided along with the firmware binary.
+#
+# Depending on the OS distribution you're using on the
+# host, the name of the package containing the firmware
+# binary and variable store template, as well as the paths
+# to the files themselves, will be different. For example:
+#
+# Fedora
+# edk2-aarch64 (pkg)
+# /usr/share/edk2/aarch64/QEMU_EFI-pflash.raw (bin)
+# /usr/share/edk2/aarch64/vars-template-pflash.raw (var)
+#
+# RHEL
+# AAVMF (pkg)
+# /usr/share/AAVMF/AAVMF_CODE.fd (bin)
+# /usr/share/AAVMF/AAVMF_VARS.fd (var)
+#
+# Debian/Ubuntu
+# qemu-efi (pkg)
+# /usr/share/AAVMF/AAVMF_CODE.fd (bin)
+# /usr/share/AAVMF/AAVMF_VARS.fd (var)
+
+[drive "uefi-binary"]
+ file = "/usr/share/AAVMF/AAVMF_CODE.fd" # CHANGE ME
+ format = "raw"
+ if = "pflash"
+ unit = "0"
+ readonly = "on"
+
+[drive "uefi-varstore"]
+ file = "guest_VARS.fd" # CHANGE ME
+ format = "raw"
+ if = "pflash"
+ unit = "1"
+
+
+# PCI bridge (PCI Express Root Ports)
+# =========================================================
+#
+# We create eight PCI Express Root Ports, and we plug them
+# all into separate functions of the same slot. Some of
+# them will be used by devices, the rest will remain
+# available for hotplug.
+
+[device "pcie.1"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.0"
+ port = "1"
+ chassis = "1"
+ multifunction = "on"
+
+[device "pcie.2"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.1"
+ port = "2"
+ chassis = "2"
+
+[device "pcie.3"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.2"
+ port = "3"
+ chassis = "3"
+
+[device "pcie.4"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.3"
+ port = "4"
+ chassis = "4"
+
+[device "pcie.5"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.4"
+ port = "5"
+ chassis = "5"
+
+[device "pcie.6"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.5"
+ port = "6"
+ chassis = "6"
+
+[device "pcie.7"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.6"
+ port = "7"
+ chassis = "7"
+
+[device "pcie.8"]
+ driver = "pcie-root-port"
+ bus = "pcie.0"
+ addr = "1c.7"
+ port = "8"
+ chassis = "8"
+
+
+# SCSI storage controller (and storage)
+# =========================================================
+#
+# We use virtio-scsi here so that we can (hot)plug a large
+# number of disks without running into issues; a SCSI disk,
+# backed by a qcow2 disk image on the host's filesystem, is
+# attached to it.
+#
+# We also create an optical disk, mostly for installation
+# purposes: once the guest OS has been succesfully
+# installed, the guest will no longer boot from optical
+# media. If you don't want, or no longer want, to have an
+# optical disk in the guest you can safely comment out
+# all relevant sections below.
+
+[device "scsi"]
+ driver = "virtio-scsi-pci"
+ bus = "pcie.1"
+ addr = "00.0"
+
+[device "scsi-disk"]
+ driver = "scsi-hd"
+ bus = "scsi.0"
+ drive = "disk"
+ bootindex = "1"
+
+[drive "disk"]
+ file = "guest.qcow2" # CHANGE ME
+ format = "qcow2"
+ if = "none"
+
+[device "scsi-optical-disk"]
+ driver = "scsi-cd"
+ bus = "scsi.0"
+ drive = "optical-disk"
+ bootindex = "2"
+
+[drive "optical-disk"]
+ file = "install.iso" # CHANGE ME
+ format = "raw"
+ if = "none"
+
+
+# Ethernet controller
+# =========================================================
+#
+# We use virtio-net for improved performance over emulated
+# hardware; on the host side, we take advantage of user
+# networking so that the QEMU process doesn't require any
+# additional privileges.
+
+[netdev "hostnet"]
+ type = "user"
+
+[device "net"]
+ driver = "virtio-net-pci"
+ netdev = "hostnet"
+ bus = "pcie.2"
+ addr = "00.0"
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [Qemu-devel] [PATCH v7 2/2] mach-virt: Provide sample configuration files
2017-02-10 17:25 ` [Qemu-devel] [PATCH v7 2/2] mach-virt: Provide " Andrea Bolognani
@ 2017-02-10 17:53 ` Andrew Jones
2017-02-13 17:38 ` Laszlo Ersek
1 sibling, 0 replies; 6+ messages in thread
From: Andrew Jones @ 2017-02-10 17:53 UTC (permalink / raw)
To: Andrea Bolognani; +Cc: qemu-devel, marcel, lersek, kraxel
On Fri, Feb 10, 2017 at 06:25:06PM +0100, Andrea Bolognani wrote:
> These are very much like the sample configuration files
> for q35, and can be used both as documentation and as
> a starting point for creating your own guest.
>
> Two sample configuration files are provided:
>
> * mach-virt-graphical.cfg can be used to start a
> fully-featured (USB, graphical console, etc.)
> guest that uses VirtIO devices;
>
> * mach-virt-serial.cfg is similar but has a minimal
> set of devices and uses the serial console.
>
> All configuration files are fully commented and neatly
> organized.
> ---
> docs/mach-virt-graphical.cfg | 281 +++++++++++++++++++++++++++++++++++++++++++
> docs/mach-virt-serial.cfg | 243 +++++++++++++++++++++++++++++++++++++
> 2 files changed, 524 insertions(+)
> create mode 100644 docs/mach-virt-graphical.cfg
> create mode 100644 docs/mach-virt-serial.cfg
Reviewed-by: Andrew Jones <drjones@redhat.com>
Thanks Andrea!
>
> diff --git a/docs/mach-virt-graphical.cfg b/docs/mach-virt-graphical.cfg
> new file mode 100644
> index 0000000..0fdf684
> --- /dev/null
> +++ b/docs/mach-virt-graphical.cfg
> @@ -0,0 +1,281 @@
> +# mach-virt - VirtIO guest (graphical console)
> +# =========================================================
> +#
> +# Usage:
> +#
> +# $ qemu-system-aarch64 \
> +# -nodefaults \
> +# -readconfig mach-virt-graphical.cfg \
> +# -cpu host
> +#
> +# You will probably need to tweak the lines marked as
> +# CHANGE ME before being able to use this configuration!
> +#
> +# The guest will have a selection of VirtIO devices
> +# tailored towards optimal performance with modern guests,
> +# and will be accessed through a graphical console.
> +#
> +# ---------------------------------------------------------
> +#
> +# Using -nodefaults is required to have full control over
> +# the virtual hardware: when it's specified, QEMU will
> +# populate the board with only the builtin peripherals,
> +# such as the PL011 UART, plus a PCI Express Root Bus; the
> +# user will then have to explicitly add further devices.
> +#
> +# The PCI Express Root Bus shows up in the guest as:
> +#
> +# 00:00.0 Host bridge
> +#
> +# This configuration file adds a number of other useful
> +# devices, more specifically:
> +#
> +# 00:01.0 Display controller
> +# 00.1c.* PCI bridge (PCI Express Root Ports)
> +# 01:00.0 SCSI storage controller
> +# 02:00.0 Ethernet controller
> +# 03:00.0 USB controller
> +#
> +# More information about these devices is available below.
> +
> +
> +# Machine options
> +# =========================================================
> +#
> +# We use the virt machine type and enable KVM acceleration
> +# for better performance.
> +#
> +# Using less than 1 GiB of memory is probably not going to
> +# yield good performance in the guest, and might even lead
> +# to obscure boot issues in some cases.
> +#
> +# Unfortunately, there is no way to configure the CPU model
> +# in this file, so it will have to be provided on the
> +# command line, but we can configure the guest to use the
> +# same GIC version as the host.
> +
> +[machine]
> + type = "virt"
> + accel = "kvm"
> + gic-version = "host"
> +
> +[memory]
> + size = "1024"
> +
> +
> +# Firmware configuration
> +# =========================================================
> +#
> +# There are two parts to the firmware: a read-only image
> +# containing the executable code, which is shared between
> +# guests, and a read/write variable store that is owned
> +# by one specific guest, exclusively, and is used to
> +# record information such as the UEFI boot order.
> +#
> +# For any new guest, its permanent, private variable store
> +# should initially be copied from the template file
> +# provided along with the firmware binary.
> +#
> +# Depending on the OS distribution you're using on the
> +# host, the name of the package containing the firmware
> +# binary and variable store template, as well as the paths
> +# to the files themselves, will be different. For example:
> +#
> +# Fedora
> +# edk2-aarch64 (pkg)
> +# /usr/share/edk2/aarch64/QEMU_EFI-pflash.raw (bin)
> +# /usr/share/edk2/aarch64/vars-template-pflash.raw (var)
> +#
> +# RHEL
> +# AAVMF (pkg)
> +# /usr/share/AAVMF/AAVMF_CODE.fd (bin)
> +# /usr/share/AAVMF/AAVMF_VARS.fd (var)
> +#
> +# Debian/Ubuntu
> +# qemu-efi (pkg)
> +# /usr/share/AAVMF/AAVMF_CODE.fd (bin)
> +# /usr/share/AAVMF/AAVMF_VARS.fd (var)
> +
> +[drive "uefi-binary"]
> + file = "/usr/share/AAVMF/AAVMF_CODE.fd" # CHANGE ME
> + format = "raw"
> + if = "pflash"
> + unit = "0"
> + readonly = "on"
> +
> +[drive "uefi-varstore"]
> + file = "guest_VARS.fd" # CHANGE ME
> + format = "raw"
> + if = "pflash"
> + unit = "1"
> +
> +
> +# PCI bridge (PCI Express Root Ports)
> +# =========================================================
> +#
> +# We create eight PCI Express Root Ports, and we plug them
> +# all into separate functions of the same slot. Some of
> +# them will be used by devices, the rest will remain
> +# available for hotplug.
> +
> +[device "pcie.1"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.0"
> + port = "1"
> + chassis = "1"
> + multifunction = "on"
> +
> +[device "pcie.2"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.1"
> + port = "2"
> + chassis = "2"
> +
> +[device "pcie.3"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.2"
> + port = "3"
> + chassis = "3"
> +
> +[device "pcie.4"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.3"
> + port = "4"
> + chassis = "4"
> +
> +[device "pcie.5"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.4"
> + port = "5"
> + chassis = "5"
> +
> +[device "pcie.6"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.5"
> + port = "6"
> + chassis = "6"
> +
> +[device "pcie.7"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.6"
> + port = "7"
> + chassis = "7"
> +
> +[device "pcie.8"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.7"
> + port = "8"
> + chassis = "8"
> +
> +
> +# SCSI storage controller (and storage)
> +# =========================================================
> +#
> +# We use virtio-scsi here so that we can (hot)plug a large
> +# number of disks without running into issues; a SCSI disk,
> +# backed by a qcow2 disk image on the host's filesystem, is
> +# attached to it.
> +#
> +# We also create an optical disk, mostly for installation
> +# purposes: once the guest OS has been succesfully
> +# installed, the guest will no longer boot from optical
> +# media. If you don't want, or no longer want, to have an
> +# optical disk in the guest you can safely comment out
> +# all relevant sections below.
> +
> +[device "scsi"]
> + driver = "virtio-scsi-pci"
> + bus = "pcie.1"
> + addr = "00.0"
> +
> +[device "scsi-disk"]
> + driver = "scsi-hd"
> + bus = "scsi.0"
> + drive = "disk"
> + bootindex = "1"
> +
> +[drive "disk"]
> + file = "guest.qcow2" # CHANGE ME
> + format = "qcow2"
> + if = "none"
> +
> +[device "scsi-optical-disk"]
> + driver = "scsi-cd"
> + bus = "scsi.0"
> + drive = "optical-disk"
> + bootindex = "2"
> +
> +[drive "optical-disk"]
> + file = "install.iso" # CHANGE ME
> + format = "raw"
> + if = "none"
> +
> +
> +# Ethernet controller
> +# =========================================================
> +#
> +# We use virtio-net for improved performance over emulated
> +# hardware; on the host side, we take advantage of user
> +# networking so that the QEMU process doesn't require any
> +# additional privileges.
> +
> +[netdev "hostnet"]
> + type = "user"
> +
> +[device "net"]
> + driver = "virtio-net-pci"
> + netdev = "hostnet"
> + bus = "pcie.2"
> + addr = "00.0"
> +
> +
> +# USB controller (and input devices)
> +# =========================================================
> +#
> +# We add a virtualization-friendly USB 3.0 controller and
> +# a USB keyboard / USB tablet combo so that graphical
> +# guests can be controlled appropriately.
> +
> +[device "usb"]
> + driver = "nec-usb-xhci"
> + bus = "pcie.3"
> + addr = "00.0"
> +
> +[device "keyboard"]
> + driver = "usb-kbd"
> + bus = "usb.0"
> +
> +[device "tablet"]
> + driver = "usb-tablet"
> + bus = "usb.0"
> +
> +
> +# Display controller
> +# =========================================================
> +#
> +# We use virtio-gpu because the legacy VGA framebuffer is
> +# very troublesome on aarch64, and virtio-gpu is the only
> +# video device that doesn't implement it.
> +#
> +# If you're running the guest on a remote, potentially
> +# headless host, you will probably want to append something
> +# like
> +#
> +# -display vnc=127.0.0.1:0
> +#
> +# to the command line in order to prevent QEMU from
> +# creating a graphical display window on the host and
> +# enable remote access instead.
> +
> +[device "video"]
> + driver = "virtio-gpu"
> + bus = "pcie.0"
> + addr = "01.0"
> diff --git a/docs/mach-virt-serial.cfg b/docs/mach-virt-serial.cfg
> new file mode 100644
> index 0000000..aee9f1c
> --- /dev/null
> +++ b/docs/mach-virt-serial.cfg
> @@ -0,0 +1,243 @@
> +# mach-virt - VirtIO guest (serial console)
> +# =========================================================
> +#
> +# Usage:
> +#
> +# $ qemu-system-aarch64 \
> +# -nodefaults \
> +# -readconfig mach-virt-serial.cfg \
> +# -display none -serial mon:stdio \
> +# -cpu host
> +#
> +# You will probably need to tweak the lines marked as
> +# CHANGE ME before being able to use this configuration!
> +#
> +# The guest will have a selection of VirtIO devices
> +# tailored towards optimal performance with modern guests,
> +# and will be accessed through the serial console.
> +#
> +# ---------------------------------------------------------
> +#
> +# Using -nodefaults is required to have full control over
> +# the virtual hardware: when it's specified, QEMU will
> +# populate the board with only the builtin peripherals,
> +# such as the PL011 UART, plus a PCI Express Root Bus; the
> +# user will then have to explicitly add further devices.
> +#
> +# The PCI Express Root Bus shows up in the guest as:
> +#
> +# 00:00.0 Host bridge
> +#
> +# This configuration file adds a number of other useful
> +# devices, more specifically:
> +#
> +# 00.1c.* PCI bridge (PCI Express Root Ports)
> +# 01:00.0 SCSI storage controller
> +# 02:00.0 Ethernet controller
> +#
> +# More information about these devices is available below.
> +#
> +# We use '-display none' to prevent QEMU from creating a
> +# graphical display window, which would serve no use in
> +# this specific configuration, and '-serial mon:stdio' to
> +# multiplex the guest's serial console and the QEMU monitor
> +# to the host's stdio; use 'Ctrl+A h' to learn how to
> +# switch between the two and more.
> +
> +
> +# Machine options
> +# =========================================================
> +#
> +# We use the virt machine type and enable KVM acceleration
> +# for better performance.
> +#
> +# Using less than 1 GiB of memory is probably not going to
> +# yield good performance in the guest, and might even lead
> +# to obscure boot issues in some cases.
> +#
> +# Unfortunately, there is no way to configure the CPU model
> +# in this file, so it will have to be provided on the
> +# command line, but we can configure the guest to use the
> +# same GIC version as the host.
> +
> +[machine]
> + type = "virt"
> + accel = "kvm"
> + gic-version = "host"
> +
> +[memory]
> + size = "1024"
> +
> +
> +# Firmware configuration
> +# =========================================================
> +#
> +# There are two parts to the firmware: a read-only image
> +# containing the executable code, which is shared between
> +# guests, and a read/write variable store that is owned
> +# by one specific guest, exclusively, and is used to
> +# record information such as the UEFI boot order.
> +#
> +# For any new guest, its permanent, private variable store
> +# should initially be copied from the template file
> +# provided along with the firmware binary.
> +#
> +# Depending on the OS distribution you're using on the
> +# host, the name of the package containing the firmware
> +# binary and variable store template, as well as the paths
> +# to the files themselves, will be different. For example:
> +#
> +# Fedora
> +# edk2-aarch64 (pkg)
> +# /usr/share/edk2/aarch64/QEMU_EFI-pflash.raw (bin)
> +# /usr/share/edk2/aarch64/vars-template-pflash.raw (var)
> +#
> +# RHEL
> +# AAVMF (pkg)
> +# /usr/share/AAVMF/AAVMF_CODE.fd (bin)
> +# /usr/share/AAVMF/AAVMF_VARS.fd (var)
> +#
> +# Debian/Ubuntu
> +# qemu-efi (pkg)
> +# /usr/share/AAVMF/AAVMF_CODE.fd (bin)
> +# /usr/share/AAVMF/AAVMF_VARS.fd (var)
> +
> +[drive "uefi-binary"]
> + file = "/usr/share/AAVMF/AAVMF_CODE.fd" # CHANGE ME
> + format = "raw"
> + if = "pflash"
> + unit = "0"
> + readonly = "on"
> +
> +[drive "uefi-varstore"]
> + file = "guest_VARS.fd" # CHANGE ME
> + format = "raw"
> + if = "pflash"
> + unit = "1"
> +
> +
> +# PCI bridge (PCI Express Root Ports)
> +# =========================================================
> +#
> +# We create eight PCI Express Root Ports, and we plug them
> +# all into separate functions of the same slot. Some of
> +# them will be used by devices, the rest will remain
> +# available for hotplug.
> +
> +[device "pcie.1"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.0"
> + port = "1"
> + chassis = "1"
> + multifunction = "on"
> +
> +[device "pcie.2"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.1"
> + port = "2"
> + chassis = "2"
> +
> +[device "pcie.3"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.2"
> + port = "3"
> + chassis = "3"
> +
> +[device "pcie.4"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.3"
> + port = "4"
> + chassis = "4"
> +
> +[device "pcie.5"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.4"
> + port = "5"
> + chassis = "5"
> +
> +[device "pcie.6"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.5"
> + port = "6"
> + chassis = "6"
> +
> +[device "pcie.7"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.6"
> + port = "7"
> + chassis = "7"
> +
> +[device "pcie.8"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.7"
> + port = "8"
> + chassis = "8"
> +
> +
> +# SCSI storage controller (and storage)
> +# =========================================================
> +#
> +# We use virtio-scsi here so that we can (hot)plug a large
> +# number of disks without running into issues; a SCSI disk,
> +# backed by a qcow2 disk image on the host's filesystem, is
> +# attached to it.
> +#
> +# We also create an optical disk, mostly for installation
> +# purposes: once the guest OS has been succesfully
> +# installed, the guest will no longer boot from optical
> +# media. If you don't want, or no longer want, to have an
> +# optical disk in the guest you can safely comment out
> +# all relevant sections below.
> +
> +[device "scsi"]
> + driver = "virtio-scsi-pci"
> + bus = "pcie.1"
> + addr = "00.0"
> +
> +[device "scsi-disk"]
> + driver = "scsi-hd"
> + bus = "scsi.0"
> + drive = "disk"
> + bootindex = "1"
> +
> +[drive "disk"]
> + file = "guest.qcow2" # CHANGE ME
> + format = "qcow2"
> + if = "none"
> +
> +[device "scsi-optical-disk"]
> + driver = "scsi-cd"
> + bus = "scsi.0"
> + drive = "optical-disk"
> + bootindex = "2"
> +
> +[drive "optical-disk"]
> + file = "install.iso" # CHANGE ME
> + format = "raw"
> + if = "none"
> +
> +
> +# Ethernet controller
> +# =========================================================
> +#
> +# We use virtio-net for improved performance over emulated
> +# hardware; on the host side, we take advantage of user
> +# networking so that the QEMU process doesn't require any
> +# additional privileges.
> +
> +[netdev "hostnet"]
> + type = "user"
> +
> +[device "net"]
> + driver = "virtio-net-pci"
> + netdev = "hostnet"
> + bus = "pcie.2"
> + addr = "00.0"
> --
> 2.7.4
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Qemu-devel] [PATCH v7 1/2] q35: Improve sample configuration files
2017-02-10 17:25 ` [Qemu-devel] [PATCH v7 1/2] q35: " Andrea Bolognani
@ 2017-02-12 18:35 ` Marcel Apfelbaum
0 siblings, 0 replies; 6+ messages in thread
From: Marcel Apfelbaum @ 2017-02-12 18:35 UTC (permalink / raw)
To: Andrea Bolognani, qemu-devel; +Cc: drjones, lersek, kraxel
On 02/10/2017 07:25 PM, Andrea Bolognani wrote:
> Instead of having a single sample configuration file,
> we now have several:
>
> * q35-emulated.cfg documents the default devices QEMU
> adds to a q35 guest and the additional devices that
> are pretty much guaranteed to be present in a
> physical q35-based machine;
>
> * q35-virtio-graphical.cfg can be used to start a
> fully-featured (USB, graphical console, audio, etc.)
> guest that uses VirtIO instead of emulated devices;
>
> * q35-virtio-serial.cfg is similar but has a minimal
> set of devices and uses the serial console.
>
> All configuration files are fully commented and neatly
> organized.
> ---
> docs/q35-chipset.cfg | 152 ----------------------
> docs/q35-emulated.cfg | 288 ++++++++++++++++++++++++++++++++++++++++++
> docs/q35-virtio-graphical.cfg | 248 ++++++++++++++++++++++++++++++++++++
> docs/q35-virtio-serial.cfg | 193 ++++++++++++++++++++++++++++
> 4 files changed, 729 insertions(+), 152 deletions(-)
> delete mode 100644 docs/q35-chipset.cfg
> create mode 100644 docs/q35-emulated.cfg
> create mode 100644 docs/q35-virtio-graphical.cfg
> create mode 100644 docs/q35-virtio-serial.cfg
>
> diff --git a/docs/q35-chipset.cfg b/docs/q35-chipset.cfg
> deleted file mode 100644
> index e4ddb7d..0000000
> --- a/docs/q35-chipset.cfg
> +++ /dev/null
> @@ -1,152 +0,0 @@
> -################################################################
> -#
> -# qemu -M q35 creates a bare machine with just the very essential
> -# chipset devices being present:
> -#
> -# 00.0 - Host bridge
> -# 1f.0 - ISA bridge / LPC
> -# 1f.2 - SATA (AHCI) controller
> -# 1f.3 - SMBus controller
> -#
> -# This config file documents the other devices and how they are
> -# created. You can simply use "-readconfig $thisfile" to create
> -# them all. Here is a overview:
> -#
> -# 19.0 - Ethernet controller (not created, our e1000 emulation
> -# doesn't emulate the ich9 device).
> -# 1a.* - USB Controller #2 (ehci + uhci companions)
> -# 1b.0 - HD Audio Controller
> -# 1c.* - PCI Express Ports
> -# 1d.* - USB Controller #1 (ehci + uhci companions,
> -# "qemu -M q35 -usb" creates these too)
> -# 1e.0 - PCI Bridge
> -#
> -
> -[device "ich9-ehci-2"]
> - driver = "ich9-usb-ehci2"
> - multifunction = "on"
> - bus = "pcie.0"
> - addr = "1a.7"
> -
> -[device "ich9-uhci-4"]
> - driver = "ich9-usb-uhci4"
> - multifunction = "on"
> - bus = "pcie.0"
> - addr = "1a.0"
> - masterbus = "ich9-ehci-2.0"
> - firstport = "0"
> -
> -[device "ich9-uhci-5"]
> - driver = "ich9-usb-uhci5"
> - multifunction = "on"
> - bus = "pcie.0"
> - addr = "1a.1"
> - masterbus = "ich9-ehci-2.0"
> - firstport = "2"
> -
> -[device "ich9-uhci-6"]
> - driver = "ich9-usb-uhci6"
> - multifunction = "on"
> - bus = "pcie.0"
> - addr = "1a.2"
> - masterbus = "ich9-ehci-2.0"
> - firstport = "4"
> -
> -
> -[device "ich9-hda-audio"]
> - driver = "ich9-intel-hda"
> - bus = "pcie.0"
> - addr = "1b.0"
> -
> -
> -[device "ich9-pcie-port-1"]
> - driver = "ioh3420"
> - multifunction = "on"
> - bus = "pcie.0"
> - addr = "1c.0"
> - port = "1"
> - chassis = "1"
> -
> -[device "ich9-pcie-port-2"]
> - driver = "ioh3420"
> - multifunction = "on"
> - bus = "pcie.0"
> - addr = "1c.1"
> - port = "2"
> - chassis = "2"
> -
> -[device "ich9-pcie-port-3"]
> - driver = "ioh3420"
> - multifunction = "on"
> - bus = "pcie.0"
> - addr = "1c.2"
> - port = "3"
> - chassis = "3"
> -
> -[device "ich9-pcie-port-4"]
> - driver = "ioh3420"
> - multifunction = "on"
> - bus = "pcie.0"
> - addr = "1c.3"
> - port = "4"
> - chassis = "4"
> -
> -##
> -# Example PCIe switch with two downstream ports
> -#
> -#[device "pcie-switch-upstream-port-1"]
> -# driver = "x3130-upstream"
> -# bus = "ich9-pcie-port-4"
> -# addr = "00.0"
> -#
> -#[device "pcie-switch-downstream-port-1-1"]
> -# driver = "xio3130-downstream"
> -# multifunction = "on"
> -# bus = "pcie-switch-upstream-port-1"
> -# addr = "00.0"
> -# port = "1"
> -# chassis = "5"
> -#
> -#[device "pcie-switch-downstream-port-1-2"]
> -# driver = "xio3130-downstream"
> -# multifunction = "on"
> -# bus = "pcie-switch-upstream-port-1"
> -# addr = "00.1"
> -# port = "1"
> -# chassis = "6"
> -
> -[device "ich9-ehci-1"]
> - driver = "ich9-usb-ehci1"
> - multifunction = "on"
> - bus = "pcie.0"
> - addr = "1d.7"
> -
> -[device "ich9-uhci-1"]
> - driver = "ich9-usb-uhci1"
> - multifunction = "on"
> - bus = "pcie.0"
> - addr = "1d.0"
> - masterbus = "ich9-ehci-1.0"
> - firstport = "0"
> -
> -[device "ich9-uhci-2"]
> - driver = "ich9-usb-uhci2"
> - multifunction = "on"
> - bus = "pcie.0"
> - addr = "1d.1"
> - masterbus = "ich9-ehci-1.0"
> - firstport = "2"
> -
> -[device "ich9-uhci-3"]
> - driver = "ich9-usb-uhci3"
> - multifunction = "on"
> - bus = "pcie.0"
> - addr = "1d.2"
> - masterbus = "ich9-ehci-1.0"
> - firstport = "4"
> -
> -
> -[device "ich9-pci-bridge"]
> - driver = "i82801b11-bridge"
> - bus = "pcie.0"
> - addr = "1e.0"
> diff --git a/docs/q35-emulated.cfg b/docs/q35-emulated.cfg
> new file mode 100644
> index 0000000..c6416d6
> --- /dev/null
> +++ b/docs/q35-emulated.cfg
> @@ -0,0 +1,288 @@
> +# q35 - Emulated guest (graphical console)
> +# =========================================================
> +#
> +# Usage:
> +#
> +# $ qemu-system-x86_64 \
> +# -nodefaults \
> +# -readconfig q35-emulated.cfg
> +#
> +# You will probably need to tweak the lines marked as
> +# CHANGE ME before being able to use this configuration!
> +#
> +# The guest will have a selection of emulated devices that
> +# closely resembles that of a physical machine, and will be
> +# accessed through a graphical console.
> +#
> +# ---------------------------------------------------------
> +#
> +# Using -nodefaults is required to have full control over
> +# the virtual hardware: when it's specified, QEMU will
> +# populate the board with only the builtin peripherals
> +# plus a small selection of core PCI devices and
> +# controllers; the user will then have to explicitly add
> +# further devices.
> +#
> +# The core PCI devices show up in the guest as:
> +#
> +# 00:00.0 Host bridge
> +# 00:1f.0 ISA bridge / LPC
> +# 00:1f.2 SATA (AHCI) controller
> +# 00:1f.3 SMBus controller
> +#
> +# This configuration file adds a number of devices that
> +# are pretty much guaranteed to be present in every single
> +# physical machine based on q35, more specifically:
> +#
> +# 00:01.0 VGA compatible controller
> +# 00:19.0 Ethernet controller
> +# 00:1a.* USB controller (#2)
> +# 00:1b.0 Audio device
> +# 00:1c.* PCI bridge (PCI Express Root Ports)
> +# 00:1d.* USB Controller (#1)
> +# 00:1e.0 PCI bridge (legacy PCI bridge)
> +#
> +# More information about these devices is available below.
> +
> +
> +# Machine options
> +# =========================================================
> +#
> +# We use the q35 machine type and enable KVM acceleration
> +# for better performance.
> +#
> +# Using less than 1 GiB of memory is probably not going to
> +# yield good performance in the guest, and might even lead
> +# to obscure boot issues in some cases.
> +#
> +# Unfortunately, there is no way to configure the CPU model
> +# in this file, so it will have to be provided on the
> +# command line.
> +
> +[machine]
> + type = "q35"
> + accel = "kvm"
> +
> +[memory]
> + size = "1024"
> +
> +
> +# PCI bridge (PCI Express Root Ports)
> +# =========================================================
> +#
> +# We add four PCI Express Root Ports, all sharing the same
> +# slot on the PCI Express Root Bus. These ports support
> +# hotplug.
> +
> +[device "ich9-pcie-port-1"]
> + driver = "ioh3420"
> + multifunction = "on"
> + bus = "pcie.0"
> + addr = "1c.0"
> + port = "1"
> + chassis = "1"
> +
> +[device "ich9-pcie-port-2"]
> + driver = "ioh3420"
> + multifunction = "on"
> + bus = "pcie.0"
> + addr = "1c.1"
> + port = "2"
> + chassis = "2"
> +
> +[device "ich9-pcie-port-3"]
> + driver = "ioh3420"
> + multifunction = "on"
> + bus = "pcie.0"
> + addr = "1c.2"
> + port = "3"
> + chassis = "3"
> +
> +[device "ich9-pcie-port-4"]
> + driver = "ioh3420"
> + multifunction = "on"
> + bus = "pcie.0"
> + addr = "1c.3"
> + port = "4"
> + chassis = "4"
> +
> +
> +# PCI bridge (legacy PCI bridge)
> +# =========================================================
> +#
> +# This bridge can be used to build an independent topology
> +# for legacy PCI devices. PCI Express devices should be
> +# plugged into PCI Express slots instead, so ideally there
> +# will be no devices connected to this bridge.
> +
> +[device "ich9-pci-bridge"]
> + driver = "i82801b11-bridge"
> + bus = "pcie.0"
> + addr = "1e.0"
> +
> +
> +# SATA storage
> +# =========================================================
> +#
> +# An implicit SATA controller is created automatically for
> +# every single q35 guest; here we create a disk, backed by
> +# a qcow2 disk image on the host's filesystem, and attach
> +# it to that controller so that the guest can use it.
> +#
> +# We also create an optical disk, mostly for installation
> +# purposes: once the guest OS has been succesfully
> +# installed, the guest will no longer boot from optical
> +# media. If you don't want, or no longer want, to have an
> +# optical disk in the guest you can safely comment out
> +# all relevant sections below.
> +
> +[device "sata-disk"]
> + driver = "ide-hd"
> + bus = "ide.0"
> + drive = "disk"
> + bootindex = "1"
> +
> +[drive "disk"]
> + file = "guest.qcow2" # CHANGE ME
> + format = "qcow2"
> + if = "none"
> +
> +[device "sata-optical-disk"]
> + driver = "ide-cd"
> + bus = "ide.1"
> + drive = "optical-disk"
> + bootindex = "2"
> +
> +[drive "optical-disk"]
> + file = "install.iso" # CHANGE ME
> + format = "raw"
> + if = "none"
> +
> +
> +# USB controller (#1)
> +# =========================================================
> +#
> +# EHCI controller + UHCI companion controllers.
> +
> +[device "ich9-ehci-1"]
> + driver = "ich9-usb-ehci1"
> + multifunction = "on"
> + bus = "pcie.0"
> + addr = "1d.7"
> +
> +[device "ich9-uhci-1"]
> + driver = "ich9-usb-uhci1"
> + multifunction = "on"
> + bus = "pcie.0"
> + addr = "1d.0"
> + masterbus = "ich9-ehci-1.0"
> + firstport = "0"
> +
> +[device "ich9-uhci-2"]
> + driver = "ich9-usb-uhci2"
> + multifunction = "on"
> + bus = "pcie.0"
> + addr = "1d.1"
> + masterbus = "ich9-ehci-1.0"
> + firstport = "2"
> +
> +[device "ich9-uhci-3"]
> + driver = "ich9-usb-uhci3"
> + multifunction = "on"
> + bus = "pcie.0"
> + addr = "1d.2"
> + masterbus = "ich9-ehci-1.0"
> + firstport = "4"
> +
> +
> +# USB controller (#2)
> +# =========================================================
> +#
> +# EHCI controller + UHCI companion controllers.
> +
> +[device "ich9-ehci-2"]
> + driver = "ich9-usb-ehci2"
> + multifunction = "on"
> + bus = "pcie.0"
> + addr = "1a.7"
> +
> +[device "ich9-uhci-4"]
> + driver = "ich9-usb-uhci4"
> + multifunction = "on"
> + bus = "pcie.0"
> + addr = "1a.0"
> + masterbus = "ich9-ehci-2.0"
> + firstport = "0"
> +
> +[device "ich9-uhci-5"]
> + driver = "ich9-usb-uhci5"
> + multifunction = "on"
> + bus = "pcie.0"
> + addr = "1a.1"
> + masterbus = "ich9-ehci-2.0"
> + firstport = "2"
> +
> +[device "ich9-uhci-6"]
> + driver = "ich9-usb-uhci6"
> + multifunction = "on"
> + bus = "pcie.0"
> + addr = "1a.2"
> + masterbus = "ich9-ehci-2.0"
> + firstport = "4"
> +
> +
> +# Ethernet controller
> +# =========================================================
> +#
> +# We add a Gigabit Ethernet interface to the guest; on the
> +# host side, we take advantage of user networking so that
> +# the QEMU process doesn't require any additional
> +# privileges.
> +
> +[netdev "hostnet"]
> + type = "user"
> +
> +[device "net"]
> + driver = "e1000"
> + netdev = "hostnet"
> + bus = "pcie.0"
> + addr = "19.0"
> +
> +
> +# VGA compatible controller
> +# =========================================================
> +#
> +# We use stdvga instead of Cirrus as it supports more video
> +# modes and is closer to what actual hardware looks like.
> +#
> +# If you're running the guest on a remote, potentially
> +# headless host, you will probably want to append something
> +# like
> +#
> +# -display vnc=127.0.0.1:0
> +#
> +# to the command line in order to prevent QEMU from
> +# creating a graphical display window on the host and
> +# enable remote access instead.
> +
> +[device "video"]
> + driver = "VGA"
> + bus = "pcie.0"
> + addr = "01.0"
> +
> +
> +# Audio device
> +# =========================================================
> +#
> +# The sound card is a legacy PCI device that is plugged
> +# directly into the PCI Express Root Bus.
> +
> +[device "ich9-hda-audio"]
> + driver = "ich9-intel-hda"
> + bus = "pcie.0"
> + addr = "1b.0"
> +
> +[device "ich9-hda-duplex"]
> + driver = "hda-duplex"
> + bus = "ich9-hda-audio.0"
> + cad = "0"
> diff --git a/docs/q35-virtio-graphical.cfg b/docs/q35-virtio-graphical.cfg
> new file mode 100644
> index 0000000..28bde2f
> --- /dev/null
> +++ b/docs/q35-virtio-graphical.cfg
> @@ -0,0 +1,248 @@
> +# q35 - VirtIO guest (graphical console)
> +# =========================================================
> +#
> +# Usage:
> +#
> +# $ qemu-system-x86_64 \
> +# -nodefaults \
> +# -readconfig q35-virtio-graphical.cfg
> +#
> +# You will probably need to tweak the lines marked as
> +# CHANGE ME before being able to use this configuration!
> +#
> +# The guest will have a selection of VirtIO devices
> +# tailored towards optimal performance with modern guests,
> +# and will be accessed through a graphical console.
> +#
> +# ---------------------------------------------------------
> +#
> +# Using -nodefaults is required to have full control over
> +# the virtual hardware: when it's specified, QEMU will
> +# populate the board with only the builtin peripherals
> +# plus a small selection of core PCI devices and
> +# controllers; the user will then have to explicitly add
> +# further devices.
> +#
> +# The core PCI devices show up in the guest as:
> +#
> +# 00:00.0 Host bridge
> +# 00:1f.0 ISA bridge / LPC
> +# 00:1f.2 SATA (AHCI) controller
> +# 00:1f.3 SMBus controller
> +#
> +# This configuration file adds a number of other useful
> +# devices, more specifically:
> +#
> +# 00:01.0 VGA compatible controller
> +# 00:1b.0 Audio device
> +# 00.1c.* PCI bridge (PCI Express Root Ports)
> +# 01:00.0 SCSI storage controller
> +# 02:00.0 Ethernet controller
> +# 03:00.0 USB controller
> +#
> +# More information about these devices is available below.
> +
> +
> +# Machine options
> +# =========================================================
> +#
> +# We use the q35 machine type and enable KVM acceleration
> +# for better performance.
> +#
> +# Using less than 1 GiB of memory is probably not going to
> +# yield good performance in the guest, and might even lead
> +# to obscure boot issues in some cases.
> +
> +[machine]
> + type = "q35"
> + accel = "kvm"
> +
> +[memory]
> + size = "1024"
> +
> +
> +# PCI bridge (PCI Express Root Ports)
> +# =========================================================
> +#
> +# We create eight PCI Express Root Ports, and we plug them
> +# all into separate functions of the same slot. Some of
> +# them will be used by devices, the rest will remain
> +# available for hotplug.
> +
> +[device "pcie.1"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.0"
> + port = "1"
> + chassis = "1"
> + multifunction = "on"
> +
> +[device "pcie.2"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.1"
> + port = "2"
> + chassis = "2"
> +
> +[device "pcie.3"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.2"
> + port = "3"
> + chassis = "3"
> +
> +[device "pcie.4"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.3"
> + port = "4"
> + chassis = "4"
> +
> +[device "pcie.5"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.4"
> + port = "5"
> + chassis = "5"
> +
> +[device "pcie.6"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.5"
> + port = "6"
> + chassis = "6"
> +
> +[device "pcie.7"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.6"
> + port = "7"
> + chassis = "7"
> +
> +[device "pcie.8"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.7"
> + port = "8"
> + chassis = "8"
> +
> +
> +# SCSI storage controller (and storage)
> +# =========================================================
> +#
> +# We use virtio-scsi here so that we can (hot)plug a large
> +# number of disks without running into issues; a SCSI disk,
> +# backed by a qcow2 disk image on the host's filesystem, is
> +# attached to it.
> +#
> +# We also create an optical disk, mostly for installation
> +# purposes: once the guest OS has been succesfully
> +# installed, the guest will no longer boot from optical
> +# media. If you don't want, or no longer want, to have an
> +# optical disk in the guest you can safely comment out
> +# all relevant sections below.
> +
> +[device "scsi"]
> + driver = "virtio-scsi-pci"
> + bus = "pcie.1"
> + addr = "00.0"
> +
> +[device "scsi-disk"]
> + driver = "scsi-hd"
> + bus = "scsi.0"
> + drive = "disk"
> + bootindex = "1"
> +
> +[drive "disk"]
> + file = "guest.qcow2" # CHANGE ME
> + format = "qcow2"
> + if = "none"
> +
> +[device "scsi-optical-disk"]
> + driver = "scsi-cd"
> + bus = "scsi.0"
> + drive = "optical-disk"
> + bootindex = "2"
> +
> +[drive "optical-disk"]
> + file = "install.iso" # CHANGE ME
> + format = "raw"
> + if = "none"
> +
> +
> +# Ethernet controller
> +# =========================================================
> +#
> +# We use virtio-net for improved performance over emulated
> +# hardware; on the host side, we take advantage of user
> +# networking so that the QEMU process doesn't require any
> +# additional privileges.
> +
> +[netdev "hostnet"]
> + type = "user"
> +
> +[device "net"]
> + driver = "virtio-net-pci"
> + netdev = "hostnet"
> + bus = "pcie.2"
> + addr = "00.0"
> +
> +
> +# USB controller (and input devices)
> +# =========================================================
> +#
> +# We add a virtualization-friendly USB 3.0 controller and
> +# a USB tablet so that graphical guests can be controlled
> +# appropriately. A USB keyboard is not needed, as q35
> +# guests get a PS/2 one added automatically.
> +
> +[device "usb"]
> + driver = "nec-usb-xhci"
> + bus = "pcie.3"
> + addr = "00.0"
> +
> +[device "tablet"]
> + driver = "usb-tablet"
> + bus = "usb.0"
> +
> +
> +# VGA compatible controller
> +# =========================================================
> +#
> +# We plug the QXL video card directly into the PCI Express
> +# Root Bus as it is a legacy PCI device; this way, we can
> +# reduce the number of PCI Express controllers in the
> +# guest.
> +#
> +# If you're running the guest on a remote, potentially
> +# headless host, you will probably want to append something
> +# like
> +#
> +# -display vnc=127.0.0.1:0
> +#
> +# to the command line in order to prevent QEMU from
> +# creating a graphical display window on the host and
> +# enable remote access instead.
> +
> +[device "video"]
> + driver = "qxl-vga"
> + bus = "pcie.0"
> + addr = "01.0"
> +
> +
> +# Audio device
> +# =========================================================
> +#
> +# Like the video card, the sound card is a legacy PCI
> +# device and as such can be plugged directly into the PCI
> +# Express Root Bus.
> +
> +[device "sound"]
> + driver = "ich9-intel-hda"
> + bus = "pcie.0"
> + addr = "1b.0"
> +
> +[device "duplex"]
> + driver = "hda-duplex"
> + bus = "sound.0"
> + cad = "0"
> diff --git a/docs/q35-virtio-serial.cfg b/docs/q35-virtio-serial.cfg
> new file mode 100644
> index 0000000..c33c9cc
> --- /dev/null
> +++ b/docs/q35-virtio-serial.cfg
> @@ -0,0 +1,193 @@
> +# q35 - VirtIO guest (serial console)
> +# =========================================================
> +#
> +# Usage:
> +#
> +# $ qemu-system-x86_64 \
> +# -nodefaults \
> +# -readconfig q35-virtio-serial.cfg \
> +# -display none -serial mon:stdio
> +#
> +# You will probably need to tweak the lines marked as
> +# CHANGE ME before being able to use this configuration!
> +#
> +# The guest will have a selection of VirtIO devices
> +# tailored towards optimal performance with modern guests,
> +# and will be accessed through the serial console.
> +#
> +# ---------------------------------------------------------
> +#
> +# Using -nodefaults is required to have full control over
> +# the virtual hardware: when it's specified, QEMU will
> +# populate the board with only the builtin peripherals
> +# plus a small selection of core PCI devices and
> +# controllers; the user will then have to explicitly add
> +# further devices.
> +#
> +# The core PCI devices show up in the guest as:
> +#
> +# 00:00.0 Host bridge
> +# 00:1f.0 ISA bridge / LPC
> +# 00:1f.2 SATA (AHCI) controller
> +# 00:1f.3 SMBus controller
> +#
> +# This configuration file adds a number of other useful
> +# devices, more specifically:
> +#
> +# 00.1c.* PCI bridge (PCI Express Root Ports)
> +# 01:00.0 SCSI storage controller
> +# 02:00.0 Ethernet controller
> +#
> +# More information about these devices is available below.
> +#
> +# We use '-display none' to prevent QEMU from creating a
> +# graphical display window, which would serve no use in
> +# this specific configuration, and '-serial mon:stdio' to
> +# multiplex the guest's serial console and the QEMU monitor
> +# to the host's stdio; use 'Ctrl+A h' to learn how to
> +# switch between the two and more.
> +
> +
> +# Machine options
> +# =========================================================
> +#
> +# We use the q35 machine type and enable KVM acceleration
> +# for better performance.
> +#
> +# Using less than 1 GiB of memory is probably not going to
> +# yield good performance in the guest, and might even lead
> +# to obscure boot issues in some cases.
> +
> +[machine]
> + type = "q35"
> + accel = "kvm"
> +
> +[memory]
> + size = "1024"
> +
> +
> +# PCI bridge (PCI Express Root Ports)
> +# =========================================================
> +#
> +# We create eight PCI Express Root Ports, and we plug them
> +# all into separate functions of the same slot. Some of
> +# them will be used by devices, the rest will remain
> +# available for hotplug.
> +
> +[device "pcie.1"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.0"
> + port = "1"
> + chassis = "1"
> + multifunction = "on"
> +
> +[device "pcie.2"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.1"
> + port = "2"
> + chassis = "2"
> +
> +[device "pcie.3"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.2"
> + port = "3"
> + chassis = "3"
> +
> +[device "pcie.4"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.3"
> + port = "4"
> + chassis = "4"
> +
> +[device "pcie.5"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.4"
> + port = "5"
> + chassis = "5"
> +
> +[device "pcie.6"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.5"
> + port = "6"
> + chassis = "6"
> +
> +[device "pcie.7"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.6"
> + port = "7"
> + chassis = "7"
> +
> +[device "pcie.8"]
> + driver = "pcie-root-port"
> + bus = "pcie.0"
> + addr = "1c.7"
> + port = "8"
> + chassis = "8"
> +
> +
> +# SCSI storage controller (and storage)
> +# =========================================================
> +#
> +# We use virtio-scsi here so that we can (hot)plug a large
> +# number of disks without running into issues; a SCSI disk,
> +# backed by a qcow2 disk image on the host's filesystem, is
> +# attached to it.
> +#
> +# We also create an optical disk, mostly for installation
> +# purposes: once the guest OS has been succesfully
> +# installed, the guest will no longer boot from optical
> +# media. If you don't want, or no longer want, to have an
> +# optical disk in the guest you can safely comment out
> +# all relevant sections below.
> +
> +[device "scsi"]
> + driver = "virtio-scsi-pci"
> + bus = "pcie.1"
> + addr = "00.0"
> +
> +[device "scsi-disk"]
> + driver = "scsi-hd"
> + bus = "scsi.0"
> + drive = "disk"
> + bootindex = "1"
> +
> +[drive "disk"]
> + file = "guest.qcow2" # CHANGE ME
> + format = "qcow2"
> + if = "none"
> +
> +[device "scsi-optical-disk"]
> + driver = "scsi-cd"
> + bus = "scsi.0"
> + drive = "optical-disk"
> + bootindex = "2"
> +
> +[drive "optical-disk"]
> + file = "install.iso" # CHANGE ME
> + format = "raw"
> + if = "none"
> +
> +
> +# Ethernet controller
> +# =========================================================
> +#
> +# We use virtio-net for improved performance over emulated
> +# hardware; on the host side, we take advantage of user
> +# networking so that the QEMU process doesn't require any
> +# additional privileges.
> +
> +[netdev "hostnet"]
> + type = "user"
> +
> +[device "net"]
> + driver = "virtio-net-pci"
> + netdev = "hostnet"
> + bus = "pcie.2"
> + addr = "00.0"
>
Hi Andrea,
Your work is much appreciated.
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Thanks,
Marcel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Qemu-devel] [PATCH v7 2/2] mach-virt: Provide sample configuration files
2017-02-10 17:25 ` [Qemu-devel] [PATCH v7 2/2] mach-virt: Provide " Andrea Bolognani
2017-02-10 17:53 ` Andrew Jones
@ 2017-02-13 17:38 ` Laszlo Ersek
1 sibling, 0 replies; 6+ messages in thread
From: Laszlo Ersek @ 2017-02-13 17:38 UTC (permalink / raw)
To: Andrea Bolognani, qemu-devel; +Cc: marcel, drjones, kraxel
On 02/10/17 18:25, Andrea Bolognani wrote:
> These are very much like the sample configuration files
> for q35, and can be used both as documentation and as
> a starting point for creating your own guest.
>
> Two sample configuration files are provided:
>
> * mach-virt-graphical.cfg can be used to start a
> fully-featured (USB, graphical console, etc.)
> guest that uses VirtIO devices;
>
> * mach-virt-serial.cfg is similar but has a minimal
> set of devices and uses the serial console.
>
> All configuration files are fully commented and neatly
> organized.
> ---
> docs/mach-virt-graphical.cfg | 281 +++++++++++++++++++++++++++++++++++++++++++
> docs/mach-virt-serial.cfg | 243 +++++++++++++++++++++++++++++++++++++
> 2 files changed, 524 insertions(+)
> create mode 100644 docs/mach-virt-graphical.cfg
> create mode 100644 docs/mach-virt-serial.cfg
>
[snip]
> +[drive "optical-disk"]
> + file = "install.iso" # CHANGE ME
> + format = "raw"
> + if = "none"
I usually add
readonly = "on"
here -- more precisely, at the corresponding location on the command
line --, but I'm unsure if that justifies v8 :)
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Thanks!
Laszlo
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-02-13 17:38 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-02-10 17:25 [Qemu-devel] [PATCH v7 0/2] docs: Improve sample configuration files Andrea Bolognani
2017-02-10 17:25 ` [Qemu-devel] [PATCH v7 1/2] q35: " Andrea Bolognani
2017-02-12 18:35 ` Marcel Apfelbaum
2017-02-10 17:25 ` [Qemu-devel] [PATCH v7 2/2] mach-virt: Provide " Andrea Bolognani
2017-02-10 17:53 ` Andrew Jones
2017-02-13 17:38 ` Laszlo Ersek
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.