[PATCH rfc 0/4] Introduce a new helper for parsing ipv[4|6]:port to socket address

[PATCH rfc 0/4] Introduce a new helper for parsing ipv[4|6]:port to socket address

[Sagi Grimberg]

We have some places in the stack that support ipv4 and ipv6. In
some cases the user configuration does not reveal which
address family is given and needs to be parsed from the input string.

Given that the user-input varies between subsystems, some processing
is required from the call-site to separate address and port strings.

As a side-effect, this set adds ipv6 support for nvme over fabrics.
I also converted iscsi target and plan to convert nfs/cifs next but
wanted to get some feedback before doing that.

patch #1 is based off roland's patch:
http://lists.infradead.org/pipermail/linux-nvme/2016-August/005600.html

Sagi Grimberg (4):
  net/utils: generic inet_pton_with_scope helper
  nvmet-rdma: use generic inet_pton_with_scope
  nvme-rdma: use inet_pton_with_scope helper
  iscsi-target: use generic inet_pton_with_scope

 drivers/nvme/host/rdma.c                     | 48 ++++-----------
 drivers/nvme/target/rdma.c                   | 42 +++++++++----
 drivers/target/iscsi/iscsi_target_configfs.c | 46 ++++----------
 include/linux/inet.h                         |  6 ++
 net/core/utils.c                             | 91 ++++++++++++++++++++++++++++
 5 files changed, 151 insertions(+), 82 deletions(-)

-- 
2.7.4

[PATCH rfc 0/4] Introduce a new helper for parsing ipv[4|6]:port to socket address

[Sagi Grimberg]

We have some places in the stack that support ipv4 and ipv6. In
some cases the user configuration does not reveal which
address family is given and needs to be parsed from the input string.

Given that the user-input varies between subsystems, some processing
is required from the call-site to separate address and port strings.

As a side-effect, this set adds ipv6 support for nvme over fabrics.
I also converted iscsi target and plan to convert nfs/cifs next but
wanted to get some feedback before doing that.

patch #1 is based off roland's patch:
http://lists.infradead.org/pipermail/linux-nvme/2016-August/005600.html

Sagi Grimberg (4):
  net/utils: generic inet_pton_with_scope helper
  nvmet-rdma: use generic inet_pton_with_scope
  nvme-rdma: use inet_pton_with_scope helper
  iscsi-target: use generic inet_pton_with_scope

 drivers/nvme/host/rdma.c                     | 48 ++++-----------
 drivers/nvme/target/rdma.c                   | 42 +++++++++----
 drivers/target/iscsi/iscsi_target_configfs.c | 46 ++++----------
 include/linux/inet.h                         |  6 ++
 net/core/utils.c                             | 91 ++++++++++++++++++++++++++++
 5 files changed, 151 insertions(+), 82 deletions(-)

-- 
2.7.4

[PATCH rfc 1/4] net/utils: generic inet_pton_with_scope helper

[Sagi Grimberg]

Several locations in the stack need to handle ipv4/ipv6
(with scope) and port strings conversion to sockaddr.
Add a helper that takes either AF_INET, AF_INET6 or
AF_UNSPEC (for wildcard) to centralize this handling.

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
---
 include/linux/inet.h |  6 ++++
 net/core/utils.c     | 91 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 97 insertions(+)

diff --git a/include/linux/inet.h b/include/linux/inet.h
index 4cca05c9678e..636ebe87e6f8 100644
--- a/include/linux/inet.h
+++ b/include/linux/inet.h
@@ -43,6 +43,8 @@
 #define _LINUX_INET_H
 
 #include <linux/types.h>
+#include <net/net_namespace.h>
+#include <linux/socket.h>
 
 /*
  * These mimic similar macros defined in user-space for inet_ntop(3).
@@ -54,4 +56,8 @@
 extern __be32 in_aton(const char *str);
 extern int in4_pton(const char *src, int srclen, u8 *dst, int delim, const char **end);
 extern int in6_pton(const char *src, int srclen, u8 *dst, int delim, const char **end);
+
+extern int inet_pton_with_scope(struct net *net, unsigned short af,
+		const char *src, const char *port, struct sockaddr_storage *addr);
+
 #endif	/* _LINUX_INET_H */
diff --git a/net/core/utils.c b/net/core/utils.c
index 6592d7bbed39..8f15d016c64a 100644
--- a/net/core/utils.c
+++ b/net/core/utils.c
@@ -26,9 +26,11 @@
 #include <linux/percpu.h>
 #include <linux/init.h>
 #include <linux/ratelimit.h>
+#include <linux/socket.h>
 
 #include <net/sock.h>
 #include <net/net_ratelimit.h>
+#include <net/ipv6.h>
 
 #include <asm/byteorder.h>
 #include <linux/uaccess.h>
@@ -300,6 +302,95 @@ int in6_pton(const char *src, int srclen,
 }
 EXPORT_SYMBOL(in6_pton);
 
+/**
+ * inet_pton_with_scope - convert an IPv4/IPv6 and port to socket address
+ * @net: net namespace (used for scope handling)
+ * @af: address family, AF_INET, AF_INET6 or AF_UNSPEC for either
+ * @src: the start of the address string
+ * @port: the start of the port string (or NULL for none)
+ * @addr: output socket address
+ *
+ * Return zero on success, return errno when any error occurs.
+ */
+int inet_pton_with_scope(struct net *net, __kernel_sa_family_t af,
+		const char *src, const char *port, struct sockaddr_storage *addr)
+{
+	struct sockaddr_in *addr4;
+	struct sockaddr_in6 *addr6;
+	const char *scope_delim;
+	bool unspec = false;
+	int srclen = strlen(src);
+	u16 port_num;
+
+	if (port) {
+		if (kstrtou16(port, 0, &port_num)) {
+			pr_err("failed port_num %s\n", port);
+			return -EINVAL;
+		}
+	} else {
+		port_num = 0;
+	}
+
+	switch (af) {
+	case AF_UNSPEC:
+		unspec = true;
+		/* FALLTHRU */
+	case AF_INET:
+		if (srclen <= INET_ADDRSTRLEN) {
+			addr4 = (struct sockaddr_in *)addr;
+			if (in4_pton(src, srclen, (u8 *) &addr4->sin_addr.s_addr,
+				     '\n', NULL) > 0) {
+				addr4->sin_family = AF_INET;
+				addr4->sin_port = htons(port_num);
+				return 0;
+			}
+			pr_err("failed in4_pton %s\n", src);
+		}
+		if (!unspec)
+			break;
+	case AF_INET6:
+		if (srclen <= INET6_ADDRSTRLEN) {
+			addr6 = (struct sockaddr_in6 *)addr;
+			if (in6_pton(src, srclen, (u8 *) &addr6->sin6_addr.s6_addr,
+				     '%', &scope_delim) == 0) {
+				pr_err("failed in6_pton %s\n", src);
+				return -EINVAL;
+			}
+
+			if (ipv6_addr_type(&addr6->sin6_addr) & IPV6_ADDR_LINKLOCAL &&
+			    src + srclen != scope_delim && *scope_delim == '%') {
+				struct net_device *dev;
+				char scope_id[16];
+				size_t scope_len = min_t(size_t, sizeof scope_id,
+							 src + srclen - scope_delim - 1);
+
+				memcpy(scope_id, scope_delim + 1, scope_len);
+				scope_id[scope_len] = '\0';
+
+				dev = dev_get_by_name(net, scope_id);
+				if (dev) {
+					addr6->sin6_scope_id = dev->ifindex;
+					dev_put(dev);
+				} else if (kstrtouint(scope_id, 0, &addr6->sin6_scope_id)) {
+					pr_err("failed dev_get_by_name %s\n", scope_id);
+					return -EINVAL;
+				}
+			}
+
+			addr6->sin6_family = AF_INET6;
+			addr6->sin6_port = htons(port_num);
+
+			return 0;
+		}
+		break;
+	default:
+		pr_err("unexpected address family %d\n", af);
+	};
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(inet_pton_with_scope);
+
 void inet_proto_csum_replace4(__sum16 *sum, struct sk_buff *skb,
 			      __be32 from, __be32 to, bool pseudohdr)
 {
-- 
2.7.4

[PATCH rfc 1/4] net/utils: generic inet_pton_with_scope helper

[Sagi Grimberg]

Several locations in the stack need to handle ipv4/ipv6
(with scope) and port strings conversion to sockaddr.
Add a helper that takes either AF_INET, AF_INET6 or
AF_UNSPEC (for wildcard) to centralize this handling.

Suggested-by: Christoph Hellwig <hch at lst.de>
Signed-off-by: Sagi Grimberg <sagi at grimberg.me>
---
 include/linux/inet.h |  6 ++++
 net/core/utils.c     | 91 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 97 insertions(+)

diff --git a/include/linux/inet.h b/include/linux/inet.h
index 4cca05c9678e..636ebe87e6f8 100644
--- a/include/linux/inet.h
+++ b/include/linux/inet.h
@@ -43,6 +43,8 @@
 #define _LINUX_INET_H
 
 #include <linux/types.h>
+#include <net/net_namespace.h>
+#include <linux/socket.h>
 
 /*
  * These mimic similar macros defined in user-space for inet_ntop(3).
@@ -54,4 +56,8 @@
 extern __be32 in_aton(const char *str);
 extern int in4_pton(const char *src, int srclen, u8 *dst, int delim, const char **end);
 extern int in6_pton(const char *src, int srclen, u8 *dst, int delim, const char **end);
+
+extern int inet_pton_with_scope(struct net *net, unsigned short af,
+		const char *src, const char *port, struct sockaddr_storage *addr);
+
 #endif	/* _LINUX_INET_H */
diff --git a/net/core/utils.c b/net/core/utils.c
index 6592d7bbed39..8f15d016c64a 100644
--- a/net/core/utils.c
+++ b/net/core/utils.c
@@ -26,9 +26,11 @@
 #include <linux/percpu.h>
 #include <linux/init.h>
 #include <linux/ratelimit.h>
+#include <linux/socket.h>
 
 #include <net/sock.h>
 #include <net/net_ratelimit.h>
+#include <net/ipv6.h>
 
 #include <asm/byteorder.h>
 #include <linux/uaccess.h>
@@ -300,6 +302,95 @@ int in6_pton(const char *src, int srclen,
 }
 EXPORT_SYMBOL(in6_pton);
 
+/**
+ * inet_pton_with_scope - convert an IPv4/IPv6 and port to socket address
+ * @net: net namespace (used for scope handling)
+ * @af: address family, AF_INET, AF_INET6 or AF_UNSPEC for either
+ * @src: the start of the address string
+ * @port: the start of the port string (or NULL for none)
+ * @addr: output socket address
+ *
+ * Return zero on success, return errno when any error occurs.
+ */
+int inet_pton_with_scope(struct net *net, __kernel_sa_family_t af,
+		const char *src, const char *port, struct sockaddr_storage *addr)
+{
+	struct sockaddr_in *addr4;
+	struct sockaddr_in6 *addr6;
+	const char *scope_delim;
+	bool unspec = false;
+	int srclen = strlen(src);
+	u16 port_num;
+
+	if (port) {
+		if (kstrtou16(port, 0, &port_num)) {
+			pr_err("failed port_num %s\n", port);
+			return -EINVAL;
+		}
+	} else {
+		port_num = 0;
+	}
+
+	switch (af) {
+	case AF_UNSPEC:
+		unspec = true;
+		/* FALLTHRU */
+	case AF_INET:
+		if (srclen <= INET_ADDRSTRLEN) {
+			addr4 = (struct sockaddr_in *)addr;
+			if (in4_pton(src, srclen, (u8 *) &addr4->sin_addr.s_addr,
+				     '\n', NULL) > 0) {
+				addr4->sin_family = AF_INET;
+				addr4->sin_port = htons(port_num);
+				return 0;
+			}
+			pr_err("failed in4_pton %s\n", src);
+		}
+		if (!unspec)
+			break;
+	case AF_INET6:
+		if (srclen <= INET6_ADDRSTRLEN) {
+			addr6 = (struct sockaddr_in6 *)addr;
+			if (in6_pton(src, srclen, (u8 *) &addr6->sin6_addr.s6_addr,
+				     '%', &scope_delim) == 0) {
+				pr_err("failed in6_pton %s\n", src);
+				return -EINVAL;
+			}
+
+			if (ipv6_addr_type(&addr6->sin6_addr) & IPV6_ADDR_LINKLOCAL &&
+			    src + srclen != scope_delim && *scope_delim == '%') {
+				struct net_device *dev;
+				char scope_id[16];
+				size_t scope_len = min_t(size_t, sizeof scope_id,
+							 src + srclen - scope_delim - 1);
+
+				memcpy(scope_id, scope_delim + 1, scope_len);
+				scope_id[scope_len] = '\0';
+
+				dev = dev_get_by_name(net, scope_id);
+				if (dev) {
+					addr6->sin6_scope_id = dev->ifindex;
+					dev_put(dev);
+				} else if (kstrtouint(scope_id, 0, &addr6->sin6_scope_id)) {
+					pr_err("failed dev_get_by_name %s\n", scope_id);
+					return -EINVAL;
+				}
+			}
+
+			addr6->sin6_family = AF_INET6;
+			addr6->sin6_port = htons(port_num);
+
+			return 0;
+		}
+		break;
+	default:
+		pr_err("unexpected address family %d\n", af);
+	};
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(inet_pton_with_scope);
+
 void inet_proto_csum_replace4(__sum16 *sum, struct sk_buff *skb,
 			      __be32 from, __be32 to, bool pseudohdr)
 {
-- 
2.7.4

[PATCH rfc 2/4] nvmet-rdma: use generic inet_pton_with_scope

[Sagi Grimberg]

Signed-off-by: Sagi Grimberg <sagi-NQWnxTmZq1alnMjI0IkVqw@public.gmane.org>
---
 drivers/nvme/target/rdma.c | 42 +++++++++++++++++++++++++++++-------------
 1 file changed, 29 insertions(+), 13 deletions(-)

diff --git a/drivers/nvme/target/rdma.c b/drivers/nvme/target/rdma.c
index 8c3760a78ac0..298db68f2db9 100644
--- a/drivers/nvme/target/rdma.c
+++ b/drivers/nvme/target/rdma.c
@@ -1411,12 +1411,16 @@ static void nvmet_rdma_delete_ctrl(struct nvmet_ctrl *ctrl)
 static int nvmet_rdma_add_port(struct nvmet_port *port)
 {
 	struct rdma_cm_id *cm_id;
-	struct sockaddr_in addr_in;
-	u16 port_in;
+	struct sockaddr_storage addr = { };
+	__kernel_sa_family_t af;
 	int ret;
 
 	switch (port->disc_addr.adrfam) {
 	case NVMF_ADDR_FAMILY_IP4:
+		af = AF_INET;
+		break;
+	case NVMF_ADDR_FAMILY_IP6:
+		af = AF_INET6;
 		break;
 	default:
 		pr_err("address family %d not supported\n",
@@ -1424,13 +1428,13 @@ static int nvmet_rdma_add_port(struct nvmet_port *port)
 		return -EINVAL;
 	}
 
-	ret = kstrtou16(port->disc_addr.trsvcid, 0, &port_in);
-	if (ret)
+	ret = inet_pton_with_scope(&init_net, af, port->disc_addr.traddr,
+			port->disc_addr.trsvcid, &addr);
+	if (ret) {
+		pr_err("malformed ip/port passed: %s:%s\n",
+			port->disc_addr.traddr, port->disc_addr.trsvcid);
 		return ret;
-
-	addr_in.sin_family = AF_INET;
-	addr_in.sin_addr.s_addr = in_aton(port->disc_addr.traddr);
-	addr_in.sin_port = htons(port_in);
+	}
 
 	cm_id = rdma_create_id(&init_net, nvmet_rdma_cm_handler, port,
 			RDMA_PS_TCP, IB_QPT_RC);
@@ -1439,20 +1443,32 @@ static int nvmet_rdma_add_port(struct nvmet_port *port)
 		return PTR_ERR(cm_id);
 	}
 
-	ret = rdma_bind_addr(cm_id, (struct sockaddr *)&addr_in);
+	/*
+	 * Allow both IPv4 and IPv6 sockets to bind a single port
+	 * at the same time.
+	 */
+	ret = rdma_set_afonly(cm_id, 1);
+	if (ret) {
+		pr_err("rdma_set_afonly failed (%d)\n", ret);
+		goto out_destroy_id;
+	}
+
+	ret = rdma_bind_addr(cm_id, (struct sockaddr *)&addr);
 	if (ret) {
-		pr_err("binding CM ID to %pISpc failed (%d)\n", &addr_in, ret);
+		pr_err("binding CM ID to %pISpcs failed (%d)\n",
+			(struct sockaddr *)&addr, ret);
 		goto out_destroy_id;
 	}
 
 	ret = rdma_listen(cm_id, 128);
 	if (ret) {
-		pr_err("listening to %pISpc failed (%d)\n", &addr_in, ret);
+		pr_err("listening to %pISpcs failed (%d)\n",
+			(struct sockaddr *)&addr, ret);
 		goto out_destroy_id;
 	}
 
-	pr_info("enabling port %d (%pISpc)\n",
-		le16_to_cpu(port->disc_addr.portid), &addr_in);
+	pr_info("enabling port %d (%pISpcs)\n",
+		le16_to_cpu(port->disc_addr.portid), (struct sockaddr *)&addr);
 	port->priv = cm_id;
 	return 0;
 
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH rfc 2/4] nvmet-rdma: use generic inet_pton_with_scope

[Sagi Grimberg]

Signed-off-by: Sagi Grimberg <sagi at grimberg.me>
---
 drivers/nvme/target/rdma.c | 42 +++++++++++++++++++++++++++++-------------
 1 file changed, 29 insertions(+), 13 deletions(-)

diff --git a/drivers/nvme/target/rdma.c b/drivers/nvme/target/rdma.c
index 8c3760a78ac0..298db68f2db9 100644
--- a/drivers/nvme/target/rdma.c
+++ b/drivers/nvme/target/rdma.c
@@ -1411,12 +1411,16 @@ static void nvmet_rdma_delete_ctrl(struct nvmet_ctrl *ctrl)
 static int nvmet_rdma_add_port(struct nvmet_port *port)
 {
 	struct rdma_cm_id *cm_id;
-	struct sockaddr_in addr_in;
-	u16 port_in;
+	struct sockaddr_storage addr = { };
+	__kernel_sa_family_t af;
 	int ret;
 
 	switch (port->disc_addr.adrfam) {
 	case NVMF_ADDR_FAMILY_IP4:
+		af = AF_INET;
+		break;
+	case NVMF_ADDR_FAMILY_IP6:
+		af = AF_INET6;
 		break;
 	default:
 		pr_err("address family %d not supported\n",
@@ -1424,13 +1428,13 @@ static int nvmet_rdma_add_port(struct nvmet_port *port)
 		return -EINVAL;
 	}
 
-	ret = kstrtou16(port->disc_addr.trsvcid, 0, &port_in);
-	if (ret)
+	ret = inet_pton_with_scope(&init_net, af, port->disc_addr.traddr,
+			port->disc_addr.trsvcid, &addr);
+	if (ret) {
+		pr_err("malformed ip/port passed: %s:%s\n",
+			port->disc_addr.traddr, port->disc_addr.trsvcid);
 		return ret;
-
-	addr_in.sin_family = AF_INET;
-	addr_in.sin_addr.s_addr = in_aton(port->disc_addr.traddr);
-	addr_in.sin_port = htons(port_in);
+	}
 
 	cm_id = rdma_create_id(&init_net, nvmet_rdma_cm_handler, port,
 			RDMA_PS_TCP, IB_QPT_RC);
@@ -1439,20 +1443,32 @@ static int nvmet_rdma_add_port(struct nvmet_port *port)
 		return PTR_ERR(cm_id);
 	}
 
-	ret = rdma_bind_addr(cm_id, (struct sockaddr *)&addr_in);
+	/*
+	 * Allow both IPv4 and IPv6 sockets to bind a single port
+	 * at the same time.
+	 */
+	ret = rdma_set_afonly(cm_id, 1);
+	if (ret) {
+		pr_err("rdma_set_afonly failed (%d)\n", ret);
+		goto out_destroy_id;
+	}
+
+	ret = rdma_bind_addr(cm_id, (struct sockaddr *)&addr);
 	if (ret) {
-		pr_err("binding CM ID to %pISpc failed (%d)\n", &addr_in, ret);
+		pr_err("binding CM ID to %pISpcs failed (%d)\n",
+			(struct sockaddr *)&addr, ret);
 		goto out_destroy_id;
 	}
 
 	ret = rdma_listen(cm_id, 128);
 	if (ret) {
-		pr_err("listening to %pISpc failed (%d)\n", &addr_in, ret);
+		pr_err("listening to %pISpcs failed (%d)\n",
+			(struct sockaddr *)&addr, ret);
 		goto out_destroy_id;
 	}
 
-	pr_info("enabling port %d (%pISpc)\n",
-		le16_to_cpu(port->disc_addr.portid), &addr_in);
+	pr_info("enabling port %d (%pISpcs)\n",
+		le16_to_cpu(port->disc_addr.portid), (struct sockaddr *)&addr);
 	port->priv = cm_id;
 	return 0;
 
-- 
2.7.4

[PATCH rfc 3/4] nvme-rdma: use inet_pton_with_scope helper

[Sagi Grimberg]

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
---
 drivers/nvme/host/rdma.c | 48 +++++++++++++-----------------------------------
 1 file changed, 13 insertions(+), 35 deletions(-)

diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index 890e7e4b1c15..bf02acbb4af8 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -151,10 +151,7 @@ struct nvme_rdma_ctrl {
 	u64			cap;
 	u32			max_fr_pages;
 
-	union {
-		struct sockaddr addr;
-		struct sockaddr_in addr_in;
-	};
+	struct sockaddr_storage addr;
 
 	struct nvme_ctrl	ctrl;
 };
@@ -589,7 +586,8 @@ static int nvme_rdma_init_queue(struct nvme_rdma_ctrl *ctrl,
 	}
 
 	queue->cm_error = -ETIMEDOUT;
-	ret = rdma_resolve_addr(queue->cm_id, NULL, &ctrl->addr,
+	ret = rdma_resolve_addr(queue->cm_id, NULL,
+			(struct sockaddr *)&ctrl->addr,
 			NVME_RDMA_CONNECT_TIMEOUT_MS);
 	if (ret) {
 		dev_info(ctrl->ctrl.device,
@@ -1874,27 +1872,13 @@ static int nvme_rdma_create_io_queues(struct nvme_rdma_ctrl *ctrl)
 	return ret;
 }
 
-static int nvme_rdma_parse_ipaddr(struct sockaddr_in *in_addr, char *p)
-{
-	u8 *addr = (u8 *)&in_addr->sin_addr.s_addr;
-	size_t buflen = strlen(p);
-
-	/* XXX: handle IPv6 addresses */
-
-	if (buflen > INET_ADDRSTRLEN)
-		return -EINVAL;
-	if (in4_pton(p, buflen, addr, '\0', NULL) == 0)
-		return -EINVAL;
-	in_addr->sin_family = AF_INET;
-	return 0;
-}
-
 static struct nvme_ctrl *nvme_rdma_create_ctrl(struct device *dev,
 		struct nvmf_ctrl_options *opts)
 {
 	struct nvme_rdma_ctrl *ctrl;
 	int ret;
 	bool changed;
+	char *port;
 
 	ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
 	if (!ctrl)
@@ -1902,24 +1886,18 @@ static struct nvme_ctrl *nvme_rdma_create_ctrl(struct device *dev,
 	ctrl->ctrl.opts = opts;
 	INIT_LIST_HEAD(&ctrl->list);
 
-	ret = nvme_rdma_parse_ipaddr(&ctrl->addr_in, opts->traddr);
+	if (opts->mask & NVMF_OPT_TRSVCID)
+		port = opts->trsvcid;
+	else
+		port = __stringify(NVME_RDMA_IP_PORT);
+
+	ret = inet_pton_with_scope(&init_net, AF_UNSPEC, opts->traddr,
+			port, &ctrl->addr);
 	if (ret) {
-		pr_err("malformed IP address passed: %s\n", opts->traddr);
+		pr_err("malformed ip/port passed: %s:%s\n", opts->traddr, port);
 		goto out_free_ctrl;
 	}
 
-	if (opts->mask & NVMF_OPT_TRSVCID) {
-		u16 port;
-
-		ret = kstrtou16(opts->trsvcid, 0, &port);
-		if (ret)
-			goto out_free_ctrl;
-
-		ctrl->addr_in.sin_port = cpu_to_be16(port);
-	} else {
-		ctrl->addr_in.sin_port = cpu_to_be16(NVME_RDMA_IP_PORT);
-	}
-
 	ret = nvme_init_ctrl(&ctrl->ctrl, dev, &nvme_rdma_ctrl_ops,
 				0 /* no quirks, we're perfect! */);
 	if (ret)
@@ -1984,7 +1962,7 @@ static struct nvme_ctrl *nvme_rdma_create_ctrl(struct device *dev,
 	changed = nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_LIVE);
 	WARN_ON_ONCE(!changed);
 
-	dev_info(ctrl->ctrl.device, "new ctrl: NQN \"%s\", addr %pISp\n",
+	dev_info(ctrl->ctrl.device, "new ctrl: NQN \"%s\", addr %pISpcs\n",
 		ctrl->ctrl.opts->subsysnqn, &ctrl->addr);
 
 	kref_get(&ctrl->ctrl.kref);
-- 
2.7.4

[PATCH rfc 3/4] nvme-rdma: use inet_pton_with_scope helper

[Sagi Grimberg]

Signed-off-by: Sagi Grimberg <sagi at grimberg.me>
---
 drivers/nvme/host/rdma.c | 48 +++++++++++++-----------------------------------
 1 file changed, 13 insertions(+), 35 deletions(-)

diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index 890e7e4b1c15..bf02acbb4af8 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -151,10 +151,7 @@ struct nvme_rdma_ctrl {
 	u64			cap;
 	u32			max_fr_pages;
 
-	union {
-		struct sockaddr addr;
-		struct sockaddr_in addr_in;
-	};
+	struct sockaddr_storage addr;
 
 	struct nvme_ctrl	ctrl;
 };
@@ -589,7 +586,8 @@ static int nvme_rdma_init_queue(struct nvme_rdma_ctrl *ctrl,
 	}
 
 	queue->cm_error = -ETIMEDOUT;
-	ret = rdma_resolve_addr(queue->cm_id, NULL, &ctrl->addr,
+	ret = rdma_resolve_addr(queue->cm_id, NULL,
+			(struct sockaddr *)&ctrl->addr,
 			NVME_RDMA_CONNECT_TIMEOUT_MS);
 	if (ret) {
 		dev_info(ctrl->ctrl.device,
@@ -1874,27 +1872,13 @@ static int nvme_rdma_create_io_queues(struct nvme_rdma_ctrl *ctrl)
 	return ret;
 }
 
-static int nvme_rdma_parse_ipaddr(struct sockaddr_in *in_addr, char *p)
-{
-	u8 *addr = (u8 *)&in_addr->sin_addr.s_addr;
-	size_t buflen = strlen(p);
-
-	/* XXX: handle IPv6 addresses */
-
-	if (buflen > INET_ADDRSTRLEN)
-		return -EINVAL;
-	if (in4_pton(p, buflen, addr, '\0', NULL) == 0)
-		return -EINVAL;
-	in_addr->sin_family = AF_INET;
-	return 0;
-}
-
 static struct nvme_ctrl *nvme_rdma_create_ctrl(struct device *dev,
 		struct nvmf_ctrl_options *opts)
 {
 	struct nvme_rdma_ctrl *ctrl;
 	int ret;
 	bool changed;
+	char *port;
 
 	ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
 	if (!ctrl)
@@ -1902,24 +1886,18 @@ static struct nvme_ctrl *nvme_rdma_create_ctrl(struct device *dev,
 	ctrl->ctrl.opts = opts;
 	INIT_LIST_HEAD(&ctrl->list);
 
-	ret = nvme_rdma_parse_ipaddr(&ctrl->addr_in, opts->traddr);
+	if (opts->mask & NVMF_OPT_TRSVCID)
+		port = opts->trsvcid;
+	else
+		port = __stringify(NVME_RDMA_IP_PORT);
+
+	ret = inet_pton_with_scope(&init_net, AF_UNSPEC, opts->traddr,
+			port, &ctrl->addr);
 	if (ret) {
-		pr_err("malformed IP address passed: %s\n", opts->traddr);
+		pr_err("malformed ip/port passed: %s:%s\n", opts->traddr, port);
 		goto out_free_ctrl;
 	}
 
-	if (opts->mask & NVMF_OPT_TRSVCID) {
-		u16 port;
-
-		ret = kstrtou16(opts->trsvcid, 0, &port);
-		if (ret)
-			goto out_free_ctrl;
-
-		ctrl->addr_in.sin_port = cpu_to_be16(port);
-	} else {
-		ctrl->addr_in.sin_port = cpu_to_be16(NVME_RDMA_IP_PORT);
-	}
-
 	ret = nvme_init_ctrl(&ctrl->ctrl, dev, &nvme_rdma_ctrl_ops,
 				0 /* no quirks, we're perfect! */);
 	if (ret)
@@ -1984,7 +1962,7 @@ static struct nvme_ctrl *nvme_rdma_create_ctrl(struct device *dev,
 	changed = nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_LIVE);
 	WARN_ON_ONCE(!changed);
 
-	dev_info(ctrl->ctrl.device, "new ctrl: NQN \"%s\", addr %pISp\n",
+	dev_info(ctrl->ctrl.device, "new ctrl: NQN \"%s\", addr %pISpcs\n",
 		ctrl->ctrl.opts->subsysnqn, &ctrl->addr);
 
 	kref_get(&ctrl->ctrl.kref);
-- 
2.7.4

[PATCH rfc 4/4] iscsi-target: use generic inet_pton_with_scope

[Sagi Grimberg]

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
---
 drivers/target/iscsi/iscsi_target_configfs.c | 46 ++++++++--------------------
 1 file changed, 12 insertions(+), 34 deletions(-)

diff --git a/drivers/target/iscsi/iscsi_target_configfs.c b/drivers/target/iscsi/iscsi_target_configfs.c
index bf40f03755dd..f30c27b83c5e 100644
--- a/drivers/target/iscsi/iscsi_target_configfs.c
+++ b/drivers/target/iscsi/iscsi_target_configfs.c
@@ -167,10 +167,7 @@ static struct se_tpg_np *lio_target_call_addnptotpg(
 	struct iscsi_portal_group *tpg;
 	struct iscsi_tpg_np *tpg_np;
 	char *str, *str2, *ip_str, *port_str;
-	struct sockaddr_storage sockaddr;
-	struct sockaddr_in *sock_in;
-	struct sockaddr_in6 *sock_in6;
-	unsigned long port;
+	struct sockaddr_storage sockaddr = { };
 	int ret;
 	char buf[MAX_PORTAL_LEN + 1];
 
@@ -182,21 +179,19 @@ static struct se_tpg_np *lio_target_call_addnptotpg(
 	memset(buf, 0, MAX_PORTAL_LEN + 1);
 	snprintf(buf, MAX_PORTAL_LEN + 1, "%s", name);
 
-	memset(&sockaddr, 0, sizeof(struct sockaddr_storage));
-
 	str = strstr(buf, "[");
 	if (str) {
-		const char *end;
-
 		str2 = strstr(str, "]");
 		if (!str2) {
 			pr_err("Unable to locate trailing \"]\""
 				" in IPv6 iSCSI network portal address\n");
 			return ERR_PTR(-EINVAL);
 		}
-		str++; /* Skip over leading "[" */
+
+		ip_str = str + 1; /* Skip over leading "[" */
 		*str2 = '\0'; /* Terminate the unbracketed IPv6 address */
 		str2++; /* Skip over the \0 */
+
 		port_str = strstr(str2, ":");
 		if (!port_str) {
 			pr_err("Unable to locate \":port\""
@@ -205,23 +200,8 @@ static struct se_tpg_np *lio_target_call_addnptotpg(
 		}
 		*port_str = '\0'; /* Terminate string for IP */
 		port_str++; /* Skip over ":" */
-
-		ret = kstrtoul(port_str, 0, &port);
-		if (ret < 0) {
-			pr_err("kstrtoul() failed for port_str: %d\n", ret);
-			return ERR_PTR(ret);
-		}
-		sock_in6 = (struct sockaddr_in6 *)&sockaddr;
-		sock_in6->sin6_family = AF_INET6;
-		sock_in6->sin6_port = htons((unsigned short)port);
-		ret = in6_pton(str, -1,
-				(void *)&sock_in6->sin6_addr.in6_u, -1, &end);
-		if (ret <= 0) {
-			pr_err("in6_pton returned: %d\n", ret);
-			return ERR_PTR(-EINVAL);
-		}
 	} else {
-		str = ip_str = &buf[0];
+		ip_str = &buf[0];
 		port_str = strstr(ip_str, ":");
 		if (!port_str) {
 			pr_err("Unable to locate \":port\""
@@ -230,17 +210,15 @@ static struct se_tpg_np *lio_target_call_addnptotpg(
 		}
 		*port_str = '\0'; /* Terminate string for IP */
 		port_str++; /* Skip over ":" */
+	}
 
-		ret = kstrtoul(port_str, 0, &port);
-		if (ret < 0) {
-			pr_err("kstrtoul() failed for port_str: %d\n", ret);
-			return ERR_PTR(ret);
-		}
-		sock_in = (struct sockaddr_in *)&sockaddr;
-		sock_in->sin_family = AF_INET;
-		sock_in->sin_port = htons((unsigned short)port);
-		sock_in->sin_addr.s_addr = in_aton(ip_str);
+	ret = inet_pton_with_scope(&init_net, AF_UNSPEC, ip_str,
+			port_str, &sockaddr);
+	if (ret) {
+		pr_err("malformed ip/port passed: %s\n", name);
+		return ERR_PTR(ret);
 	}
+
 	tpg = container_of(se_tpg, struct iscsi_portal_group, tpg_se_tpg);
 	ret = iscsit_get_tpg(tpg);
 	if (ret < 0)
-- 
2.7.4

[PATCH rfc 4/4] iscsi-target: use generic inet_pton_with_scope

[Sagi Grimberg]

Signed-off-by: Sagi Grimberg <sagi at grimberg.me>
---
 drivers/target/iscsi/iscsi_target_configfs.c | 46 ++++++++--------------------
 1 file changed, 12 insertions(+), 34 deletions(-)

diff --git a/drivers/target/iscsi/iscsi_target_configfs.c b/drivers/target/iscsi/iscsi_target_configfs.c
index bf40f03755dd..f30c27b83c5e 100644
--- a/drivers/target/iscsi/iscsi_target_configfs.c
+++ b/drivers/target/iscsi/iscsi_target_configfs.c
@@ -167,10 +167,7 @@ static struct se_tpg_np *lio_target_call_addnptotpg(
 	struct iscsi_portal_group *tpg;
 	struct iscsi_tpg_np *tpg_np;
 	char *str, *str2, *ip_str, *port_str;
-	struct sockaddr_storage sockaddr;
-	struct sockaddr_in *sock_in;
-	struct sockaddr_in6 *sock_in6;
-	unsigned long port;
+	struct sockaddr_storage sockaddr = { };
 	int ret;
 	char buf[MAX_PORTAL_LEN + 1];
 
@@ -182,21 +179,19 @@ static struct se_tpg_np *lio_target_call_addnptotpg(
 	memset(buf, 0, MAX_PORTAL_LEN + 1);
 	snprintf(buf, MAX_PORTAL_LEN + 1, "%s", name);
 
-	memset(&sockaddr, 0, sizeof(struct sockaddr_storage));
-
 	str = strstr(buf, "[");
 	if (str) {
-		const char *end;
-
 		str2 = strstr(str, "]");
 		if (!str2) {
 			pr_err("Unable to locate trailing \"]\""
 				" in IPv6 iSCSI network portal address\n");
 			return ERR_PTR(-EINVAL);
 		}
-		str++; /* Skip over leading "[" */
+
+		ip_str = str + 1; /* Skip over leading "[" */
 		*str2 = '\0'; /* Terminate the unbracketed IPv6 address */
 		str2++; /* Skip over the \0 */
+
 		port_str = strstr(str2, ":");
 		if (!port_str) {
 			pr_err("Unable to locate \":port\""
@@ -205,23 +200,8 @@ static struct se_tpg_np *lio_target_call_addnptotpg(
 		}
 		*port_str = '\0'; /* Terminate string for IP */
 		port_str++; /* Skip over ":" */
-
-		ret = kstrtoul(port_str, 0, &port);
-		if (ret < 0) {
-			pr_err("kstrtoul() failed for port_str: %d\n", ret);
-			return ERR_PTR(ret);
-		}
-		sock_in6 = (struct sockaddr_in6 *)&sockaddr;
-		sock_in6->sin6_family = AF_INET6;
-		sock_in6->sin6_port = htons((unsigned short)port);
-		ret = in6_pton(str, -1,
-				(void *)&sock_in6->sin6_addr.in6_u, -1, &end);
-		if (ret <= 0) {
-			pr_err("in6_pton returned: %d\n", ret);
-			return ERR_PTR(-EINVAL);
-		}
 	} else {
-		str = ip_str = &buf[0];
+		ip_str = &buf[0];
 		port_str = strstr(ip_str, ":");
 		if (!port_str) {
 			pr_err("Unable to locate \":port\""
@@ -230,17 +210,15 @@ static struct se_tpg_np *lio_target_call_addnptotpg(
 		}
 		*port_str = '\0'; /* Terminate string for IP */
 		port_str++; /* Skip over ":" */
+	}
 
-		ret = kstrtoul(port_str, 0, &port);
-		if (ret < 0) {
-			pr_err("kstrtoul() failed for port_str: %d\n", ret);
-			return ERR_PTR(ret);
-		}
-		sock_in = (struct sockaddr_in *)&sockaddr;
-		sock_in->sin_family = AF_INET;
-		sock_in->sin_port = htons((unsigned short)port);
-		sock_in->sin_addr.s_addr = in_aton(ip_str);
+	ret = inet_pton_with_scope(&init_net, AF_UNSPEC, ip_str,
+			port_str, &sockaddr);
+	if (ret) {
+		pr_err("malformed ip/port passed: %s\n", name);
+		return ERR_PTR(ret);
 	}
+
 	tpg = container_of(se_tpg, struct iscsi_portal_group, tpg_se_tpg);
 	ret = iscsit_get_tpg(tpg);
 	if (ret < 0)
-- 
2.7.4

Re: [PATCH rfc 0/4] Introduce a new helper for parsing ipv[4|6]:port to socket address

[Chuck Lever]

> On Feb 16, 2017, at 12:43 PM, Sagi Grimberg <sagi@grimberg.me> wrote:
> 
> We have some places in the stack that support ipv4 and ipv6. In
> some cases the user configuration does not reveal which
> address family is given and needs to be parsed from the input string.
> 
> Given that the user-input varies between subsystems, some processing
> is required from the call-site to separate address and port strings.
> 
> As a side-effect, this set adds ipv6 support for nvme over fabrics.
> I also converted iscsi target and plan to convert nfs/cifs next but
> wanted to get some feedback before doing that.

At least NFS/RDMA already supports IPv6. You might not need many
changes there, but I'll hold off on further comments.


> patch #1 is based off roland's patch:
> http://lists.infradead.org/pipermail/linux-nvme/2016-August/005600.html
> 
> Sagi Grimberg (4):
>  net/utils: generic inet_pton_with_scope helper
>  nvmet-rdma: use generic inet_pton_with_scope
>  nvme-rdma: use inet_pton_with_scope helper
>  iscsi-target: use generic inet_pton_with_scope
> 
> drivers/nvme/host/rdma.c                     | 48 ++++-----------
> drivers/nvme/target/rdma.c                   | 42 +++++++++----
> drivers/target/iscsi/iscsi_target_configfs.c | 46 ++++----------
> include/linux/inet.h                         |  6 ++
> net/core/utils.c                             | 91 ++++++++++++++++++++++++++++
> 5 files changed, 151 insertions(+), 82 deletions(-)
> 
> -- 
> 2.7.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
Chuck Lever

[PATCH rfc 0/4] Introduce a new helper for parsing ipv[4|6]:port to socket address

[Chuck Lever]

> On Feb 16, 2017,@12:43 PM, Sagi Grimberg <sagi@grimberg.me> wrote:
> 
> We have some places in the stack that support ipv4 and ipv6. In
> some cases the user configuration does not reveal which
> address family is given and needs to be parsed from the input string.
> 
> Given that the user-input varies between subsystems, some processing
> is required from the call-site to separate address and port strings.
> 
> As a side-effect, this set adds ipv6 support for nvme over fabrics.
> I also converted iscsi target and plan to convert nfs/cifs next but
> wanted to get some feedback before doing that.

At least NFS/RDMA already supports IPv6. You might not need many
changes there, but I'll hold off on further comments.


> patch #1 is based off roland's patch:
> http://lists.infradead.org/pipermail/linux-nvme/2016-August/005600.html
> 
> Sagi Grimberg (4):
>  net/utils: generic inet_pton_with_scope helper
>  nvmet-rdma: use generic inet_pton_with_scope
>  nvme-rdma: use inet_pton_with_scope helper
>  iscsi-target: use generic inet_pton_with_scope
> 
> drivers/nvme/host/rdma.c                     | 48 ++++-----------
> drivers/nvme/target/rdma.c                   | 42 +++++++++----
> drivers/target/iscsi/iscsi_target_configfs.c | 46 ++++----------
> include/linux/inet.h                         |  6 ++
> net/core/utils.c                             | 91 ++++++++++++++++++++++++++++
> 5 files changed, 151 insertions(+), 82 deletions(-)
> 
> -- 
> 2.7.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
Chuck Lever

Re: [PATCH rfc 0/4] Introduce a new helper for parsing ipv[4|6]:port to socket address

[Sagi Grimberg]

Hey Chuck,

>> As a side-effect, this set adds ipv6 support for nvme over fabrics.
>> I also converted iscsi target and plan to convert nfs/cifs next but
>> wanted to get some feedback before doing that.
>
> At least NFS/RDMA already supports IPv6. You might not need many
> changes there, but I'll hold off on further comments.

Yea, I wanted to get all the rpc_pton/rpc_ntop (which handle both
ipv4 and ipv6 with scopes) converted to use a common helper.

[PATCH rfc 0/4] Introduce a new helper for parsing ipv[4|6]:port to socket address

[Sagi Grimberg]

Hey Chuck,

>> As a side-effect, this set adds ipv6 support for nvme over fabrics.
>> I also converted iscsi target and plan to convert nfs/cifs next but
>> wanted to get some feedback before doing that.
>
> At least NFS/RDMA already supports IPv6. You might not need many
> changes there, but I'll hold off on further comments.

Yea, I wanted to get all the rpc_pton/rpc_ntop (which handle both
ipv4 and ipv6 with scopes) converted to use a common helper.

Re: [PATCH rfc 0/4] Introduce a new helper for parsing ipv[4|6]:port to socket address

[Chuck Lever]

> On Feb 16, 2017, at 12:53 PM, Sagi Grimberg <sagi-NQWnxTmZq1alnMjI0IkVqw@public.gmane.org> wrote:
> 
> Hey Chuck,
> 
>>> As a side-effect, this set adds ipv6 support for nvme over fabrics.
>>> I also converted iscsi target and plan to convert nfs/cifs next but
>>> wanted to get some feedback before doing that.
>> 
>> At least NFS/RDMA already supports IPv6. You might not need many
>> changes there, but I'll hold off on further comments.
> 
> Yea, I wanted to get all the rpc_pton/rpc_ntop (which handle both
> ipv4 and ipv6 with scopes) converted to use a common helper.

RPC is dealing with universal addresses, which are not quite the
same as IP presentation addresses. The port number is expressed
as:

  hi8.lo8

And universal IPv6 addresses don't have a mechanism for conveying
scope information.


--
Chuck Lever



--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH rfc 0/4] Introduce a new helper for parsing ipv[4|6]:port to socket address

[Chuck Lever]

> On Feb 16, 2017,@12:53 PM, Sagi Grimberg <sagi@grimberg.me> wrote:
> 
> Hey Chuck,
> 
>>> As a side-effect, this set adds ipv6 support for nvme over fabrics.
>>> I also converted iscsi target and plan to convert nfs/cifs next but
>>> wanted to get some feedback before doing that.
>> 
>> At least NFS/RDMA already supports IPv6. You might not need many
>> changes there, but I'll hold off on further comments.
> 
> Yea, I wanted to get all the rpc_pton/rpc_ntop (which handle both
> ipv4 and ipv6 with scopes) converted to use a common helper.

RPC is dealing with universal addresses, which are not quite the
same as IP presentation addresses. The port number is expressed
as:

  hi8.lo8

And universal IPv6 addresses don't have a mechanism for conveying
scope information.


--
Chuck Lever

Re: [PATCH rfc 0/4] Introduce a new helper for parsing ipv[4|6]:port to socket address

[Sagi Grimberg]

>> Yea, I wanted to get all the rpc_pton/rpc_ntop (which handle both
>> ipv4 and ipv6 with scopes) converted to use a common helper.
>
> RPC is dealing with universal addresses, which are not quite the
> same as IP presentation addresses. The port number is expressed
> as:
>
>   hi8.lo8

I noticed that, that's why there will be some processing in
sunrpc to construct a port string to a generic helper (if it chooses to
use it).

> And universal IPv6 addresses don't have a mechanism for conveying
> scope information.

I do see scope handling in rpc_pton6 code if provided...

[PATCH rfc 0/4] Introduce a new helper for parsing ipv[4|6]:port to socket address

[Sagi Grimberg]

>> Yea, I wanted to get all the rpc_pton/rpc_ntop (which handle both
>> ipv4 and ipv6 with scopes) converted to use a common helper.
>
> RPC is dealing with universal addresses, which are not quite the
> same as IP presentation addresses. The port number is expressed
> as:
>
>   hi8.lo8

I noticed that, that's why there will be some processing in
sunrpc to construct a port string to a generic helper (if it chooses to
use it).

> And universal IPv6 addresses don't have a mechanism for conveying
> scope information.

I do see scope handling in rpc_pton6 code if provided...

Re: [PATCH rfc 1/4] net/utils: generic inet_pton_with_scope helper

[kbuild test robot]

Hi Sagi,

[auto build test WARNING on linus/master]
[also build test WARNING on v4.10-rc8 next-20170216]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Sagi-Grimberg/Introduce-a-new-helper-for-parsing-ipv-4-6-port-to-socket-address/20170217-015537


coccinelle warnings: (new ones prefixed by >>)

>> net/core/utils.c:388:2-3: Unneeded semicolon

Please review and possibly fold the followup patch.

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[PATCH rfc 1/4] net/utils: generic inet_pton_with_scope helper

[kbuild test robot]

Hi Sagi,

[auto build test WARNING on linus/master]
[also build test WARNING on v4.10-rc8 next-20170216]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Sagi-Grimberg/Introduce-a-new-helper-for-parsing-ipv-4-6-port-to-socket-address/20170217-015537


coccinelle warnings: (new ones prefixed by >>)

>> net/core/utils.c:388:2-3: Unneeded semicolon

Please review and possibly fold the followup patch.

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[PATCH] net/utils: fix semicolon.cocci warnings

[kbuild test robot]

net/core/utils.c:388:2-3: Unneeded semicolon


 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

CC: Sagi Grimberg <sagi-NQWnxTmZq1alnMjI0IkVqw@public.gmane.org>
Signed-off-by: Fengguang Wu <fengguang.wu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---

 utils.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/core/utils.c
+++ b/net/core/utils.c
@@ -385,7 +385,7 @@ int inet_pton_with_scope(struct net *net
 		break;
 	default:
 		pr_err("unexpected address family %d\n", af);
-	};
+	}
 
 	return -EINVAL;
 }
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] net/utils: fix semicolon.cocci warnings

[kbuild test robot]

net/core/utils.c:388:2-3: Unneeded semicolon


 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

CC: Sagi Grimberg <sagi at grimberg.me>
Signed-off-by: Fengguang Wu <fengguang.wu at intel.com>
---

 utils.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/core/utils.c
+++ b/net/core/utils.c
@@ -385,7 +385,7 @@ int inet_pton_with_scope(struct net *net
 		break;
 	default:
 		pr_err("unexpected address family %d\n", af);
-	};
+	}
 
 	return -EINVAL;
 }

Re: [PATCH] net/utils: fix semicolon.cocci warnings

[David Miller]

From: kbuild test robot <lkp@intel.com>
Date: Fri, 17 Feb 2017 05:34:03 +0800

> net/core/utils.c:388:2-3: Unneeded semicolon
> 
> 
>  Remove unneeded semicolon.
> 
> Generated by: scripts/coccinelle/misc/semicolon.cocci
> 
> CC: Sagi Grimberg <sagi@grimberg.me>
> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
> ---
> 
>  utils.c |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> --- a/net/core/utils.c
> +++ b/net/core/utils.c
> @@ -385,7 +385,7 @@ int inet_pton_with_scope(struct net *net

I have no idea what tree this could be against, as net/core/utils.c doesn't
have more than 351 lines in any tree I maintain.

[PATCH] net/utils: fix semicolon.cocci warnings

[David Miller]

From: kbuild test robot <lkp@intel.com>
Date: Fri, 17 Feb 2017 05:34:03 +0800

> net/core/utils.c:388:2-3: Unneeded semicolon
> 
> 
>  Remove unneeded semicolon.
> 
> Generated by: scripts/coccinelle/misc/semicolon.cocci
> 
> CC: Sagi Grimberg <sagi at grimberg.me>
> Signed-off-by: Fengguang Wu <fengguang.wu at intel.com>
> ---
> 
>  utils.c |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> --- a/net/core/utils.c
> +++ b/net/core/utils.c
> @@ -385,7 +385,7 @@ int inet_pton_with_scope(struct net *net

I have no idea what tree this could be against, as net/core/utils.c doesn't
have more than 351 lines in any tree I maintain.

Re: [PATCH] net/utils: fix semicolon.cocci warnings

[Keith Busch]

On Fri, Feb 17, 2017 at 01:52:54PM -0500, David Miller wrote:
> From: kbuild test robot <lkp@intel.com>
> Date: Fri, 17 Feb 2017 05:34:03 +0800
> 
> > net/core/utils.c:388:2-3: Unneeded semicolon
> > 
> > 
> >  Remove unneeded semicolon.
> > 
> > Generated by: scripts/coccinelle/misc/semicolon.cocci
> > 
> > CC: Sagi Grimberg <sagi@grimberg.me>
> > Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
> > ---
> > 
> >  utils.c |    2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > --- a/net/core/utils.c
> > +++ b/net/core/utils.c
> > @@ -385,7 +385,7 @@ int inet_pton_with_scope(struct net *net
> 
> I have no idea what tree this could be against, as net/core/utils.c doesn't
> have more than 351 lines in any tree I maintain.

I think this is just an auto-generated patch based on a 0-day internal
tree that applied the patch it's proposing to fix. The robot script may
be a jumping the gun here for sending this.

[PATCH] net/utils: fix semicolon.cocci warnings

[Keith Busch]

On Fri, Feb 17, 2017@01:52:54PM -0500, David Miller wrote:
> From: kbuild test robot <lkp at intel.com>
> Date: Fri, 17 Feb 2017 05:34:03 +0800
> 
> > net/core/utils.c:388:2-3: Unneeded semicolon
> > 
> > 
> >  Remove unneeded semicolon.
> > 
> > Generated by: scripts/coccinelle/misc/semicolon.cocci
> > 
> > CC: Sagi Grimberg <sagi at grimberg.me>
> > Signed-off-by: Fengguang Wu <fengguang.wu at intel.com>
> > ---
> > 
> >  utils.c |    2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > --- a/net/core/utils.c
> > +++ b/net/core/utils.c
> > @@ -385,7 +385,7 @@ int inet_pton_with_scope(struct net *net
> 
> I have no idea what tree this could be against, as net/core/utils.c doesn't
> have more than 351 lines in any tree I maintain.

I think this is just an auto-generated patch based on a 0-day internal
tree that applied the patch it's proposing to fix. The robot script may
be a jumping the gun here for sending this.

Re: [PATCH] net/utils: fix semicolon.cocci warnings

[Fengguang Wu]

Hi Dave,

On Fri, Feb 17, 2017 at 01:52:54PM -0500, David Miller wrote:
>From: kbuild test robot <lkp@intel.com>
>Date: Fri, 17 Feb 2017 05:34:03 +0800
>
>> net/core/utils.c:388:2-3: Unneeded semicolon
>>
>>
>>  Remove unneeded semicolon.
>>
>> Generated by: scripts/coccinelle/misc/semicolon.cocci
>>
>> CC: Sagi Grimberg <sagi@grimberg.me>
>> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
>> ---
>>
>>  utils.c |    2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> --- a/net/core/utils.c
>> +++ b/net/core/utils.c
>> @@ -385,7 +385,7 @@ int inet_pton_with_scope(struct net *net
>
>I have no idea what tree this could be against, as net/core/utils.c doesn't
>have more than 351 lines in any tree I maintain.

You can ignore it -- the cocci fix is for Sagi Grimberg's RFC patch
which can be judged by looking at the thread:

  Feb 17 To Sagi Grimber (  22:0) -->Re: [PATCH rfc 1/4] net/utils: generic inet_pton_with_scope helper
  Feb 17 To Sagi Grimber (  29:0) `->[PATCH] net/utils: fix semicolon.cocci warnings

Thanks,
Fengguang

[PATCH] net/utils: fix semicolon.cocci warnings

[Fengguang Wu]

Hi Dave,

On Fri, Feb 17, 2017@01:52:54PM -0500, David Miller wrote:
>From: kbuild test robot <lkp at intel.com>
>Date: Fri, 17 Feb 2017 05:34:03 +0800
>
>> net/core/utils.c:388:2-3: Unneeded semicolon
>>
>>
>>  Remove unneeded semicolon.
>>
>> Generated by: scripts/coccinelle/misc/semicolon.cocci
>>
>> CC: Sagi Grimberg <sagi at grimberg.me>
>> Signed-off-by: Fengguang Wu <fengguang.wu at intel.com>
>> ---
>>
>>  utils.c |    2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> --- a/net/core/utils.c
>> +++ b/net/core/utils.c
>> @@ -385,7 +385,7 @@ int inet_pton_with_scope(struct net *net
>
>I have no idea what tree this could be against, as net/core/utils.c doesn't
>have more than 351 lines in any tree I maintain.

You can ignore it -- the cocci fix is for Sagi Grimberg's RFC patch
which can be judged by looking at the thread:

  Feb 17 To Sagi Grimber (  22:0) -->Re: [PATCH rfc 1/4] net/utils: generic inet_pton_with_scope helper
  Feb 17 To Sagi Grimber (  29:0) `->[PATCH] net/utils: fix semicolon.cocci warnings

Thanks,
Fengguang

Re: [PATCH rfc 4/4] iscsi-target: use generic inet_pton_with_scope

[Nicholas A. Bellinger]

On Thu, 2017-02-16 at 19:43 +0200, Sagi Grimberg wrote:
> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
> ---
>  drivers/target/iscsi/iscsi_target_configfs.c | 46 ++++++++--------------------
>  1 file changed, 12 insertions(+), 34 deletions(-)
> 
> diff --git a/drivers/target/iscsi/iscsi_target_configfs.c b/drivers/target/iscsi/iscsi_target_configfs.c
> index bf40f03755dd..f30c27b83c5e 100644
> --- a/drivers/target/iscsi/iscsi_target_configfs.c
> +++ b/drivers/target/iscsi/iscsi_target_configfs.c
> @@ -167,10 +167,7 @@ static struct se_tpg_np *lio_target_call_addnptotpg(
>  	struct iscsi_portal_group *tpg;
>  	struct iscsi_tpg_np *tpg_np;
>  	char *str, *str2, *ip_str, *port_str;
> -	struct sockaddr_storage sockaddr;
> -	struct sockaddr_in *sock_in;
> -	struct sockaddr_in6 *sock_in6;
> -	unsigned long port;
> +	struct sockaddr_storage sockaddr = { };
>  	int ret;
>  	char buf[MAX_PORTAL_LEN + 1];
>  
> @@ -182,21 +179,19 @@ static struct se_tpg_np *lio_target_call_addnptotpg(
>  	memset(buf, 0, MAX_PORTAL_LEN + 1);
>  	snprintf(buf, MAX_PORTAL_LEN + 1, "%s", name);
>  
> -	memset(&sockaddr, 0, sizeof(struct sockaddr_storage));
> -
>  	str = strstr(buf, "[");
>  	if (str) {
> -		const char *end;
> -
>  		str2 = strstr(str, "]");
>  		if (!str2) {
>  			pr_err("Unable to locate trailing \"]\""
>  				" in IPv6 iSCSI network portal address\n");
>  			return ERR_PTR(-EINVAL);
>  		}
> -		str++; /* Skip over leading "[" */
> +
> +		ip_str = str + 1; /* Skip over leading "[" */
>  		*str2 = '\0'; /* Terminate the unbracketed IPv6 address */
>  		str2++; /* Skip over the \0 */
> +
>  		port_str = strstr(str2, ":");
>  		if (!port_str) {
>  			pr_err("Unable to locate \":port\""
> @@ -205,23 +200,8 @@ static struct se_tpg_np *lio_target_call_addnptotpg(
>  		}
>  		*port_str = '\0'; /* Terminate string for IP */
>  		port_str++; /* Skip over ":" */
> -
> -		ret = kstrtoul(port_str, 0, &port);
> -		if (ret < 0) {
> -			pr_err("kstrtoul() failed for port_str: %d\n", ret);
> -			return ERR_PTR(ret);
> -		}
> -		sock_in6 = (struct sockaddr_in6 *)&sockaddr;
> -		sock_in6->sin6_family = AF_INET6;
> -		sock_in6->sin6_port = htons((unsigned short)port);
> -		ret = in6_pton(str, -1,
> -				(void *)&sock_in6->sin6_addr.in6_u, -1, &end);
> -		if (ret <= 0) {
> -			pr_err("in6_pton returned: %d\n", ret);
> -			return ERR_PTR(-EINVAL);
> -		}
>  	} else {
> -		str = ip_str = &buf[0];
> +		ip_str = &buf[0];
>  		port_str = strstr(ip_str, ":");
>  		if (!port_str) {
>  			pr_err("Unable to locate \":port\""
> @@ -230,17 +210,15 @@ static struct se_tpg_np *lio_target_call_addnptotpg(
>  		}
>  		*port_str = '\0'; /* Terminate string for IP */
>  		port_str++; /* Skip over ":" */
> +	}
>  
> -		ret = kstrtoul(port_str, 0, &port);
> -		if (ret < 0) {
> -			pr_err("kstrtoul() failed for port_str: %d\n", ret);
> -			return ERR_PTR(ret);
> -		}
> -		sock_in = (struct sockaddr_in *)&sockaddr;
> -		sock_in->sin_family = AF_INET;
> -		sock_in->sin_port = htons((unsigned short)port);
> -		sock_in->sin_addr.s_addr = in_aton(ip_str);
> +	ret = inet_pton_with_scope(&init_net, AF_UNSPEC, ip_str,
> +			port_str, &sockaddr);
> +	if (ret) {
> +		pr_err("malformed ip/port passed: %s\n", name);
> +		return ERR_PTR(ret);
>  	}
> +
>  	tpg = container_of(se_tpg, struct iscsi_portal_group, tpg_se_tpg);
>  	ret = iscsit_get_tpg(tpg);
>  	if (ret < 0)

A nice cleanup.

Acked-by: Nicholas Bellinger <nab@linux-iscsi.org>

[PATCH rfc 4/4] iscsi-target: use generic inet_pton_with_scope

[Nicholas A. Bellinger]

On Thu, 2017-02-16@19:43 +0200, Sagi Grimberg wrote:
> Signed-off-by: Sagi Grimberg <sagi at grimberg.me>
> ---
>  drivers/target/iscsi/iscsi_target_configfs.c | 46 ++++++++--------------------
>  1 file changed, 12 insertions(+), 34 deletions(-)
> 
> diff --git a/drivers/target/iscsi/iscsi_target_configfs.c b/drivers/target/iscsi/iscsi_target_configfs.c
> index bf40f03755dd..f30c27b83c5e 100644
> --- a/drivers/target/iscsi/iscsi_target_configfs.c
> +++ b/drivers/target/iscsi/iscsi_target_configfs.c
> @@ -167,10 +167,7 @@ static struct se_tpg_np *lio_target_call_addnptotpg(
>  	struct iscsi_portal_group *tpg;
>  	struct iscsi_tpg_np *tpg_np;
>  	char *str, *str2, *ip_str, *port_str;
> -	struct sockaddr_storage sockaddr;
> -	struct sockaddr_in *sock_in;
> -	struct sockaddr_in6 *sock_in6;
> -	unsigned long port;
> +	struct sockaddr_storage sockaddr = { };
>  	int ret;
>  	char buf[MAX_PORTAL_LEN + 1];
>  
> @@ -182,21 +179,19 @@ static struct se_tpg_np *lio_target_call_addnptotpg(
>  	memset(buf, 0, MAX_PORTAL_LEN + 1);
>  	snprintf(buf, MAX_PORTAL_LEN + 1, "%s", name);
>  
> -	memset(&sockaddr, 0, sizeof(struct sockaddr_storage));
> -
>  	str = strstr(buf, "[");
>  	if (str) {
> -		const char *end;
> -
>  		str2 = strstr(str, "]");
>  		if (!str2) {
>  			pr_err("Unable to locate trailing \"]\""
>  				" in IPv6 iSCSI network portal address\n");
>  			return ERR_PTR(-EINVAL);
>  		}
> -		str++; /* Skip over leading "[" */
> +
> +		ip_str = str + 1; /* Skip over leading "[" */
>  		*str2 = '\0'; /* Terminate the unbracketed IPv6 address */
>  		str2++; /* Skip over the \0 */
> +
>  		port_str = strstr(str2, ":");
>  		if (!port_str) {
>  			pr_err("Unable to locate \":port\""
> @@ -205,23 +200,8 @@ static struct se_tpg_np *lio_target_call_addnptotpg(
>  		}
>  		*port_str = '\0'; /* Terminate string for IP */
>  		port_str++; /* Skip over ":" */
> -
> -		ret = kstrtoul(port_str, 0, &port);
> -		if (ret < 0) {
> -			pr_err("kstrtoul() failed for port_str: %d\n", ret);
> -			return ERR_PTR(ret);
> -		}
> -		sock_in6 = (struct sockaddr_in6 *)&sockaddr;
> -		sock_in6->sin6_family = AF_INET6;
> -		sock_in6->sin6_port = htons((unsigned short)port);
> -		ret = in6_pton(str, -1,
> -				(void *)&sock_in6->sin6_addr.in6_u, -1, &end);
> -		if (ret <= 0) {
> -			pr_err("in6_pton returned: %d\n", ret);
> -			return ERR_PTR(-EINVAL);
> -		}
>  	} else {
> -		str = ip_str = &buf[0];
> +		ip_str = &buf[0];
>  		port_str = strstr(ip_str, ":");
>  		if (!port_str) {
>  			pr_err("Unable to locate \":port\""
> @@ -230,17 +210,15 @@ static struct se_tpg_np *lio_target_call_addnptotpg(
>  		}
>  		*port_str = '\0'; /* Terminate string for IP */
>  		port_str++; /* Skip over ":" */
> +	}
>  
> -		ret = kstrtoul(port_str, 0, &port);
> -		if (ret < 0) {
> -			pr_err("kstrtoul() failed for port_str: %d\n", ret);
> -			return ERR_PTR(ret);
> -		}
> -		sock_in = (struct sockaddr_in *)&sockaddr;
> -		sock_in->sin_family = AF_INET;
> -		sock_in->sin_port = htons((unsigned short)port);
> -		sock_in->sin_addr.s_addr = in_aton(ip_str);
> +	ret = inet_pton_with_scope(&init_net, AF_UNSPEC, ip_str,
> +			port_str, &sockaddr);
> +	if (ret) {
> +		pr_err("malformed ip/port passed: %s\n", name);
> +		return ERR_PTR(ret);
>  	}
> +
>  	tpg = container_of(se_tpg, struct iscsi_portal_group, tpg_se_tpg);
>  	ret = iscsit_get_tpg(tpg);
>  	if (ret < 0)

A nice cleanup.

Acked-by: Nicholas Bellinger <nab at linux-iscsi.org>

Re: [PATCH rfc 1/4] net/utils: generic inet_pton_with_scope helper

[Christoph Hellwig]

On Thu, Feb 16, 2017 at 07:43:34PM +0200, Sagi Grimberg wrote:
> Several locations in the stack need to handle ipv4/ipv6
> (with scope) and port strings conversion to sockaddr.
> Add a helper that takes either AF_INET, AF_INET6 or
> AF_UNSPEC (for wildcard) to centralize this handling.
> 
> Suggested-by: Christoph Hellwig <hch@lst.de>
> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
> ---
>  include/linux/inet.h |  6 ++++
>  net/core/utils.c     | 91 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 97 insertions(+)
> 
> diff --git a/include/linux/inet.h b/include/linux/inet.h
> index 4cca05c9678e..636ebe87e6f8 100644
> --- a/include/linux/inet.h
> +++ b/include/linux/inet.h
> @@ -43,6 +43,8 @@
>  #define _LINUX_INET_H
>  
>  #include <linux/types.h>
> +#include <net/net_namespace.h>
> +#include <linux/socket.h>
>  
>  /*
>   * These mimic similar macros defined in user-space for inet_ntop(3).
> @@ -54,4 +56,8 @@
>  extern __be32 in_aton(const char *str);
>  extern int in4_pton(const char *src, int srclen, u8 *dst, int delim, const char **end);
>  extern int in6_pton(const char *src, int srclen, u8 *dst, int delim, const char **end);
> +
> +extern int inet_pton_with_scope(struct net *net, unsigned short af,
> +		const char *src, const char *port, struct sockaddr_storage *addr);
> +
>  #endif	/* _LINUX_INET_H */
> diff --git a/net/core/utils.c b/net/core/utils.c
> index 6592d7bbed39..8f15d016c64a 100644
> --- a/net/core/utils.c
> +++ b/net/core/utils.c
> @@ -26,9 +26,11 @@
>  #include <linux/percpu.h>
>  #include <linux/init.h>
>  #include <linux/ratelimit.h>
> +#include <linux/socket.h>
>  
>  #include <net/sock.h>
>  #include <net/net_ratelimit.h>
> +#include <net/ipv6.h>
>  
>  #include <asm/byteorder.h>
>  #include <linux/uaccess.h>
> @@ -300,6 +302,95 @@ int in6_pton(const char *src, int srclen,
>  }
>  EXPORT_SYMBOL(in6_pton);
>  
> +/**
> + * inet_pton_with_scope - convert an IPv4/IPv6 and port to socket address
> + * @net: net namespace (used for scope handling)
> + * @af: address family, AF_INET, AF_INET6 or AF_UNSPEC for either
> + * @src: the start of the address string
> + * @port: the start of the port string (or NULL for none)
> + * @addr: output socket address
> + *
> + * Return zero on success, return errno when any error occurs.
> + */
> +int inet_pton_with_scope(struct net *net, __kernel_sa_family_t af,
> +		const char *src, const char *port, struct sockaddr_storage *addr)
> +{
> +	struct sockaddr_in *addr4;
> +	struct sockaddr_in6 *addr6;
> +	const char *scope_delim;
> +	bool unspec = false;
> +	int srclen = strlen(src);
> +	u16 port_num;
> +
> +	if (port) {
> +		if (kstrtou16(port, 0, &port_num)) {
> +			pr_err("failed port_num %s\n", port);
> +			return -EINVAL;
> +		}
> +	} else {
> +		port_num = 0;
> +	}
> +
> +	switch (af) {
> +	case AF_UNSPEC:
> +		unspec = true;
> +		/* FALLTHRU */
> +	case AF_INET:
> +		if (srclen <= INET_ADDRSTRLEN) {
> +			addr4 = (struct sockaddr_in *)addr;
> +			if (in4_pton(src, srclen, (u8 *) &addr4->sin_addr.s_addr,
> +				     '\n', NULL) > 0) {
> +				addr4->sin_family = AF_INET;
> +				addr4->sin_port = htons(port_num);
> +				return 0;
> +			}
> +			pr_err("failed in4_pton %s\n", src);
> +		}

I would probably factor this and the IPv6 equivalent below into helpers
to keep the code a little more self-contained so that we could avoid the
fallthrough magic.

Except for that and the semicolon warnings this looks fine to me.

[PATCH rfc 1/4] net/utils: generic inet_pton_with_scope helper

[Christoph Hellwig]

On Thu, Feb 16, 2017@07:43:34PM +0200, Sagi Grimberg wrote:
> Several locations in the stack need to handle ipv4/ipv6
> (with scope) and port strings conversion to sockaddr.
> Add a helper that takes either AF_INET, AF_INET6 or
> AF_UNSPEC (for wildcard) to centralize this handling.
> 
> Suggested-by: Christoph Hellwig <hch at lst.de>
> Signed-off-by: Sagi Grimberg <sagi at grimberg.me>
> ---
>  include/linux/inet.h |  6 ++++
>  net/core/utils.c     | 91 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 97 insertions(+)
> 
> diff --git a/include/linux/inet.h b/include/linux/inet.h
> index 4cca05c9678e..636ebe87e6f8 100644
> --- a/include/linux/inet.h
> +++ b/include/linux/inet.h
> @@ -43,6 +43,8 @@
>  #define _LINUX_INET_H
>  
>  #include <linux/types.h>
> +#include <net/net_namespace.h>
> +#include <linux/socket.h>
>  
>  /*
>   * These mimic similar macros defined in user-space for inet_ntop(3).
> @@ -54,4 +56,8 @@
>  extern __be32 in_aton(const char *str);
>  extern int in4_pton(const char *src, int srclen, u8 *dst, int delim, const char **end);
>  extern int in6_pton(const char *src, int srclen, u8 *dst, int delim, const char **end);
> +
> +extern int inet_pton_with_scope(struct net *net, unsigned short af,
> +		const char *src, const char *port, struct sockaddr_storage *addr);
> +
>  #endif	/* _LINUX_INET_H */
> diff --git a/net/core/utils.c b/net/core/utils.c
> index 6592d7bbed39..8f15d016c64a 100644
> --- a/net/core/utils.c
> +++ b/net/core/utils.c
> @@ -26,9 +26,11 @@
>  #include <linux/percpu.h>
>  #include <linux/init.h>
>  #include <linux/ratelimit.h>
> +#include <linux/socket.h>
>  
>  #include <net/sock.h>
>  #include <net/net_ratelimit.h>
> +#include <net/ipv6.h>
>  
>  #include <asm/byteorder.h>
>  #include <linux/uaccess.h>
> @@ -300,6 +302,95 @@ int in6_pton(const char *src, int srclen,
>  }
>  EXPORT_SYMBOL(in6_pton);
>  
> +/**
> + * inet_pton_with_scope - convert an IPv4/IPv6 and port to socket address
> + * @net: net namespace (used for scope handling)
> + * @af: address family, AF_INET, AF_INET6 or AF_UNSPEC for either
> + * @src: the start of the address string
> + * @port: the start of the port string (or NULL for none)
> + * @addr: output socket address
> + *
> + * Return zero on success, return errno when any error occurs.
> + */
> +int inet_pton_with_scope(struct net *net, __kernel_sa_family_t af,
> +		const char *src, const char *port, struct sockaddr_storage *addr)
> +{
> +	struct sockaddr_in *addr4;
> +	struct sockaddr_in6 *addr6;
> +	const char *scope_delim;
> +	bool unspec = false;
> +	int srclen = strlen(src);
> +	u16 port_num;
> +
> +	if (port) {
> +		if (kstrtou16(port, 0, &port_num)) {
> +			pr_err("failed port_num %s\n", port);
> +			return -EINVAL;
> +		}
> +	} else {
> +		port_num = 0;
> +	}
> +
> +	switch (af) {
> +	case AF_UNSPEC:
> +		unspec = true;
> +		/* FALLTHRU */
> +	case AF_INET:
> +		if (srclen <= INET_ADDRSTRLEN) {
> +			addr4 = (struct sockaddr_in *)addr;
> +			if (in4_pton(src, srclen, (u8 *) &addr4->sin_addr.s_addr,
> +				     '\n', NULL) > 0) {
> +				addr4->sin_family = AF_INET;
> +				addr4->sin_port = htons(port_num);
> +				return 0;
> +			}
> +			pr_err("failed in4_pton %s\n", src);
> +		}

I would probably factor this and the IPv6 equivalent below into helpers
to keep the code a little more self-contained so that we could avoid the
fallthrough magic.

Except for that and the semicolon warnings this looks fine to me.

Re: [PATCH rfc 1/4] net/utils: generic inet_pton_with_scope helper

[Sagi Grimberg]

On 19/02/17 19:15, Christoph Hellwig wrote:
> On Thu, Feb 16, 2017 at 07:43:34PM +0200, Sagi Grimberg wrote:
>> Several locations in the stack need to handle ipv4/ipv6
>> (with scope) and port strings conversion to sockaddr.
>> Add a helper that takes either AF_INET, AF_INET6 or
>> AF_UNSPEC (for wildcard) to centralize this handling.
>>
>> Suggested-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
>> Signed-off-by: Sagi Grimberg <sagi-NQWnxTmZq1alnMjI0IkVqw@public.gmane.org>
>> ---
>>  include/linux/inet.h |  6 ++++
>>  net/core/utils.c     | 91 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>>  2 files changed, 97 insertions(+)
>>
>> diff --git a/include/linux/inet.h b/include/linux/inet.h
>> index 4cca05c9678e..636ebe87e6f8 100644
>> --- a/include/linux/inet.h
>> +++ b/include/linux/inet.h
>> @@ -43,6 +43,8 @@
>>  #define _LINUX_INET_H
>>
>>  #include <linux/types.h>
>> +#include <net/net_namespace.h>
>> +#include <linux/socket.h>
>>
>>  /*
>>   * These mimic similar macros defined in user-space for inet_ntop(3).
>> @@ -54,4 +56,8 @@
>>  extern __be32 in_aton(const char *str);
>>  extern int in4_pton(const char *src, int srclen, u8 *dst, int delim, const char **end);
>>  extern int in6_pton(const char *src, int srclen, u8 *dst, int delim, const char **end);
>> +
>> +extern int inet_pton_with_scope(struct net *net, unsigned short af,
>> +		const char *src, const char *port, struct sockaddr_storage *addr);
>> +
>>  #endif	/* _LINUX_INET_H */
>> diff --git a/net/core/utils.c b/net/core/utils.c
>> index 6592d7bbed39..8f15d016c64a 100644
>> --- a/net/core/utils.c
>> +++ b/net/core/utils.c
>> @@ -26,9 +26,11 @@
>>  #include <linux/percpu.h>
>>  #include <linux/init.h>
>>  #include <linux/ratelimit.h>
>> +#include <linux/socket.h>
>>
>>  #include <net/sock.h>
>>  #include <net/net_ratelimit.h>
>> +#include <net/ipv6.h>
>>
>>  #include <asm/byteorder.h>
>>  #include <linux/uaccess.h>
>> @@ -300,6 +302,95 @@ int in6_pton(const char *src, int srclen,
>>  }
>>  EXPORT_SYMBOL(in6_pton);
>>
>> +/**
>> + * inet_pton_with_scope - convert an IPv4/IPv6 and port to socket address
>> + * @net: net namespace (used for scope handling)
>> + * @af: address family, AF_INET, AF_INET6 or AF_UNSPEC for either
>> + * @src: the start of the address string
>> + * @port: the start of the port string (or NULL for none)
>> + * @addr: output socket address
>> + *
>> + * Return zero on success, return errno when any error occurs.
>> + */
>> +int inet_pton_with_scope(struct net *net, __kernel_sa_family_t af,
>> +		const char *src, const char *port, struct sockaddr_storage *addr)
>> +{
>> +	struct sockaddr_in *addr4;
>> +	struct sockaddr_in6 *addr6;
>> +	const char *scope_delim;
>> +	bool unspec = false;
>> +	int srclen = strlen(src);
>> +	u16 port_num;
>> +
>> +	if (port) {
>> +		if (kstrtou16(port, 0, &port_num)) {
>> +			pr_err("failed port_num %s\n", port);
>> +			return -EINVAL;
>> +		}
>> +	} else {
>> +		port_num = 0;
>> +	}
>> +
>> +	switch (af) {
>> +	case AF_UNSPEC:
>> +		unspec = true;
>> +		/* FALLTHRU */
>> +	case AF_INET:
>> +		if (srclen <= INET_ADDRSTRLEN) {
>> +			addr4 = (struct sockaddr_in *)addr;
>> +			if (in4_pton(src, srclen, (u8 *) &addr4->sin_addr.s_addr,
>> +				     '\n', NULL) > 0) {
>> +				addr4->sin_family = AF_INET;
>> +				addr4->sin_port = htons(port_num);
>> +				return 0;
>> +			}
>> +			pr_err("failed in4_pton %s\n", src);
>> +		}
>
> I would probably factor this and the IPv6 equivalent below into helpers
> to keep the code a little more self-contained so that we could avoid the
> fallthrough magic.

I can factor out ipv4/ipv6 to helpers, but still I need to try either
ipv4, ipv6, or both for unspec.

I can maybe do something like:

if (af == AF_INET || af == AF_UNSPEC) {
	ret = inet4_pton();
	if (!ret)
		return 0;
	else if (af != AF_UNSPEC)
		return ret;
}

if (af == AF_INET6 || af == AF_UNSPEC) {
	ret = inet6_pton();
	if (!ret)
		return 0;
	else if (af != AF_UNSPEC)
		return ret;
}

return -EINVAL;

better?
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH rfc 1/4] net/utils: generic inet_pton_with_scope helper

[Sagi Grimberg]

On 19/02/17 19:15, Christoph Hellwig wrote:
> On Thu, Feb 16, 2017@07:43:34PM +0200, Sagi Grimberg wrote:
>> Several locations in the stack need to handle ipv4/ipv6
>> (with scope) and port strings conversion to sockaddr.
>> Add a helper that takes either AF_INET, AF_INET6 or
>> AF_UNSPEC (for wildcard) to centralize this handling.
>>
>> Suggested-by: Christoph Hellwig <hch at lst.de>
>> Signed-off-by: Sagi Grimberg <sagi at grimberg.me>
>> ---
>>  include/linux/inet.h |  6 ++++
>>  net/core/utils.c     | 91 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>>  2 files changed, 97 insertions(+)
>>
>> diff --git a/include/linux/inet.h b/include/linux/inet.h
>> index 4cca05c9678e..636ebe87e6f8 100644
>> --- a/include/linux/inet.h
>> +++ b/include/linux/inet.h
>> @@ -43,6 +43,8 @@
>>  #define _LINUX_INET_H
>>
>>  #include <linux/types.h>
>> +#include <net/net_namespace.h>
>> +#include <linux/socket.h>
>>
>>  /*
>>   * These mimic similar macros defined in user-space for inet_ntop(3).
>> @@ -54,4 +56,8 @@
>>  extern __be32 in_aton(const char *str);
>>  extern int in4_pton(const char *src, int srclen, u8 *dst, int delim, const char **end);
>>  extern int in6_pton(const char *src, int srclen, u8 *dst, int delim, const char **end);
>> +
>> +extern int inet_pton_with_scope(struct net *net, unsigned short af,
>> +		const char *src, const char *port, struct sockaddr_storage *addr);
>> +
>>  #endif	/* _LINUX_INET_H */
>> diff --git a/net/core/utils.c b/net/core/utils.c
>> index 6592d7bbed39..8f15d016c64a 100644
>> --- a/net/core/utils.c
>> +++ b/net/core/utils.c
>> @@ -26,9 +26,11 @@
>>  #include <linux/percpu.h>
>>  #include <linux/init.h>
>>  #include <linux/ratelimit.h>
>> +#include <linux/socket.h>
>>
>>  #include <net/sock.h>
>>  #include <net/net_ratelimit.h>
>> +#include <net/ipv6.h>
>>
>>  #include <asm/byteorder.h>
>>  #include <linux/uaccess.h>
>> @@ -300,6 +302,95 @@ int in6_pton(const char *src, int srclen,
>>  }
>>  EXPORT_SYMBOL(in6_pton);
>>
>> +/**
>> + * inet_pton_with_scope - convert an IPv4/IPv6 and port to socket address
>> + * @net: net namespace (used for scope handling)
>> + * @af: address family, AF_INET, AF_INET6 or AF_UNSPEC for either
>> + * @src: the start of the address string
>> + * @port: the start of the port string (or NULL for none)
>> + * @addr: output socket address
>> + *
>> + * Return zero on success, return errno when any error occurs.
>> + */
>> +int inet_pton_with_scope(struct net *net, __kernel_sa_family_t af,
>> +		const char *src, const char *port, struct sockaddr_storage *addr)
>> +{
>> +	struct sockaddr_in *addr4;
>> +	struct sockaddr_in6 *addr6;
>> +	const char *scope_delim;
>> +	bool unspec = false;
>> +	int srclen = strlen(src);
>> +	u16 port_num;
>> +
>> +	if (port) {
>> +		if (kstrtou16(port, 0, &port_num)) {
>> +			pr_err("failed port_num %s\n", port);
>> +			return -EINVAL;
>> +		}
>> +	} else {
>> +		port_num = 0;
>> +	}
>> +
>> +	switch (af) {
>> +	case AF_UNSPEC:
>> +		unspec = true;
>> +		/* FALLTHRU */
>> +	case AF_INET:
>> +		if (srclen <= INET_ADDRSTRLEN) {
>> +			addr4 = (struct sockaddr_in *)addr;
>> +			if (in4_pton(src, srclen, (u8 *) &addr4->sin_addr.s_addr,
>> +				     '\n', NULL) > 0) {
>> +				addr4->sin_family = AF_INET;
>> +				addr4->sin_port = htons(port_num);
>> +				return 0;
>> +			}
>> +			pr_err("failed in4_pton %s\n", src);
>> +		}
>
> I would probably factor this and the IPv6 equivalent below into helpers
> to keep the code a little more self-contained so that we could avoid the
> fallthrough magic.

I can factor out ipv4/ipv6 to helpers, but still I need to try either
ipv4, ipv6, or both for unspec.

I can maybe do something like:

if (af == AF_INET || af == AF_UNSPEC) {
	ret = inet4_pton();
	if (!ret)
		return 0;
	else if (af != AF_UNSPEC)
		return ret;
}

if (af == AF_INET6 || af == AF_UNSPEC) {
	ret = inet6_pton();
	if (!ret)
		return 0;
	else if (af != AF_UNSPEC)
		return ret;
}

return -EINVAL;

better?

Re: [PATCH rfc 1/4] net/utils: generic inet_pton_with_scope helper

[Christoph Hellwig]

On Tue, Feb 21, 2017 at 11:18:04PM +0200, Sagi Grimberg wrote:
> I can maybe do something like:
> 
> if (af == AF_INET || af == AF_UNSPEC) {
> 	ret = inet4_pton();
> 	if (!ret)
> 		return 0;
> 	else if (af != AF_UNSPEC)
> 		return ret;
> }
> 
> if (af == AF_INET6 || af == AF_UNSPEC) {
> 	ret = inet6_pton();
> 	if (!ret)
> 		return 0;
> 	else if (af != AF_UNSPEC)
> 		return ret;
> }
> 
> return -EINVAL;
> 
> better?

My idead was the following:

	switch (af) {
	case AF_INET:
		ret = inet_pton();
		break;
	case AF_INET6:
		ret = inet6_pton();
		break;
	case AF_UNSPEC:
		ret = inet6_pton();
		if (ret)
			ret = inet_pton();
		break;
	}
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH rfc 1/4] net/utils: generic inet_pton_with_scope helper

[Christoph Hellwig]

On Tue, Feb 21, 2017@11:18:04PM +0200, Sagi Grimberg wrote:
> I can maybe do something like:
> 
> if (af == AF_INET || af == AF_UNSPEC) {
> 	ret = inet4_pton();
> 	if (!ret)
> 		return 0;
> 	else if (af != AF_UNSPEC)
> 		return ret;
> }
> 
> if (af == AF_INET6 || af == AF_UNSPEC) {
> 	ret = inet6_pton();
> 	if (!ret)
> 		return 0;
> 	else if (af != AF_UNSPEC)
> 		return ret;
> }
> 
> return -EINVAL;
> 
> better?

My idead was the following:

	switch (af) {
	case AF_INET:
		ret = inet_pton();
		break;
	case AF_INET6:
		ret = inet6_pton();
		break;
	case AF_UNSPEC:
		ret = inet6_pton();
		if (ret)
			ret = inet_pton();
		break;
	}