* [PATCH v2 0/4] ARM: dts: da850-evm: vpif DT changes
@ 2017-02-22 14:01 ` Bartosz Golaszewski
0 siblings, 0 replies; 13+ messages in thread
From: Bartosz Golaszewski @ 2017-02-22 14:01 UTC (permalink / raw)
To: linux-arm-kernel
This series adds necessary changes to make vpif work on the da850-evm
board.
The first patch only contains whitespace error fixes.
The second patch add a pinctrl node for vpif display pins.
The third adds the UI expander node that is needed to select the video
capture functionality.
The last patch extends the vpif node with an output port.
v1 -> v2:
- used enable-gpios property instead of gpio hogs
- renamed the UI expander
- corrected the commit message in patch 2/4
Bartosz Golaszewski (4):
ARM: dts: da850-evm: fix whitespace errors
ARM: dts: da850: add vpif video display pins
ARM: dts: da850-evm: add the UI expander node
ARM: dts: da850-evm: add the output port to the vpif node
arch/arm/boot/dts/da850-evm.dts | 35 +++++++++++++++++++++++++----------
arch/arm/boot/dts/da850.dtsi | 25 ++++++++++++++++++++++---
2 files changed, 47 insertions(+), 13 deletions(-)
--
2.9.3
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v2 1/4] ARM: dts: da850-evm: fix whitespace errors
@ 2017-02-22 14:01 ` Bartosz Golaszewski
0 siblings, 0 replies; 13+ messages in thread
From: Bartosz Golaszewski @ 2017-02-22 14:01 UTC (permalink / raw)
To: Sekhar Nori, David Lechner, Kevin Hilman, Michael Turquette,
Patrick Titiano, Laurent Pinchart, Rob Herring, Mark Rutland,
Russell King
Cc: linux-arm-kernel, linux-kernel, devicetree, Bartosz Golaszewski
The da850-evm dts file contains whitespace errors in the vpif node.
This patch fixes them.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
arch/arm/boot/dts/da850-evm.dts | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 8c5671c..dece981 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -302,14 +302,14 @@
/* VPIF capture port */
port {
vpif_ch0: endpoint@0 {
- reg = <0>;
- bus-width = <8>;
+ reg = <0>;
+ bus-width = <8>;
};
vpif_ch1: endpoint@1 {
- reg = <1>;
- bus-width = <8>;
- data-shift = <8>;
+ reg = <1>;
+ bus-width = <8>;
+ data-shift = <8>;
};
};
};
--
2.9.3
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v2 1/4] ARM: dts: da850-evm: fix whitespace errors
@ 2017-02-22 14:01 ` Bartosz Golaszewski
0 siblings, 0 replies; 13+ messages in thread
From: Bartosz Golaszewski @ 2017-02-22 14:01 UTC (permalink / raw)
To: linux-arm-kernel
The da850-evm dts file contains whitespace errors in the vpif node.
This patch fixes them.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
arch/arm/boot/dts/da850-evm.dts | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 8c5671c..dece981 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -302,14 +302,14 @@
/* VPIF capture port */
port {
vpif_ch0: endpoint at 0 {
- reg = <0>;
- bus-width = <8>;
+ reg = <0>;
+ bus-width = <8>;
};
vpif_ch1: endpoint at 1 {
- reg = <1>;
- bus-width = <8>;
- data-shift = <8>;
+ reg = <1>;
+ bus-width = <8>;
+ data-shift = <8>;
};
};
};
--
2.9.3
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v2 1/4] ARM: dts: da850-evm: fix whitespace errors
@ 2017-02-22 14:01 ` Bartosz Golaszewski
0 siblings, 0 replies; 13+ messages in thread
From: Bartosz Golaszewski @ 2017-02-22 14:01 UTC (permalink / raw)
To: Sekhar Nori, David Lechner, Kevin Hilman, Michael Turquette,
Patrick Titiano, Laurent Pinchart, Rob Herring, Mark Rutland,
Russell King
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA, Bartosz Golaszewski
The da850-evm dts file contains whitespace errors in the vpif node.
This patch fixes them.
Signed-off-by: Bartosz Golaszewski <bgolaszewski-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
arch/arm/boot/dts/da850-evm.dts | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 8c5671c..dece981 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -302,14 +302,14 @@
/* VPIF capture port */
port {
vpif_ch0: endpoint@0 {
- reg = <0>;
- bus-width = <8>;
+ reg = <0>;
+ bus-width = <8>;
};
vpif_ch1: endpoint@1 {
- reg = <1>;
- bus-width = <8>;
- data-shift = <8>;
+ reg = <1>;
+ bus-width = <8>;
+ data-shift = <8>;
};
};
};
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v2 2/4] ARM: dts: da850: add vpif video display pins
2017-02-22 14:01 ` Bartosz Golaszewski
@ 2017-02-22 14:01 ` Bartosz Golaszewski
-1 siblings, 0 replies; 13+ messages in thread
From: Bartosz Golaszewski @ 2017-02-22 14:01 UTC (permalink / raw)
To: Sekhar Nori, David Lechner, Kevin Hilman, Michael Turquette,
Patrick Titiano, Laurent Pinchart, Rob Herring, Mark Rutland,
Russell King
Cc: linux-arm-kernel, linux-kernel, devicetree, Bartosz Golaszewski
Add a new pinctrl sub-node for vpif display pins. Move VP_CLKIN3 and
VP_CLKIN2 to the display node where they actually belong (vide section
36.2.2 of the OMAP-L138 technical reference manual).
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
arch/arm/boot/dts/da850.dtsi | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 92d633d..5150331 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -216,8 +216,21 @@
0x3c 0x11111111 0xffffffff
/* VP_DIN[8..9] */
0x40 0x00000011 0x000000ff
- /* VP_CLKIN3, VP_CLKIN2 */
- 0x4c 0x00010100 0x000f0f00
+ >;
+ };
+ vpif_display_pins: vpif_display_pins {
+ pinctrl-single,bits = <
+ /* VP_DOUT[2..7] */
+ 0x40 0x11111100 0xffffff00
+ /* VP_DOUT[10..15,0..1] */
+ 0x44 0x11111111 0xffffffff
+ /* VP_DOUT[8..9] */
+ 0x48 0x00000011 0x000000ff
+ /*
+ * VP_CLKOUT3, VP_CLKIN3,
+ * VP_CLKOUT2, VP_CLKIN2
+ */
+ 0x4c 0x00111100 0x00ffff00
>;
};
};
--
2.9.3
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v2 2/4] ARM: dts: da850: add vpif video display pins
@ 2017-02-22 14:01 ` Bartosz Golaszewski
0 siblings, 0 replies; 13+ messages in thread
From: Bartosz Golaszewski @ 2017-02-22 14:01 UTC (permalink / raw)
To: linux-arm-kernel
Add a new pinctrl sub-node for vpif display pins. Move VP_CLKIN3 and
VP_CLKIN2 to the display node where they actually belong (vide section
36.2.2 of the OMAP-L138 technical reference manual).
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
arch/arm/boot/dts/da850.dtsi | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 92d633d..5150331 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -216,8 +216,21 @@
0x3c 0x11111111 0xffffffff
/* VP_DIN[8..9] */
0x40 0x00000011 0x000000ff
- /* VP_CLKIN3, VP_CLKIN2 */
- 0x4c 0x00010100 0x000f0f00
+ >;
+ };
+ vpif_display_pins: vpif_display_pins {
+ pinctrl-single,bits = <
+ /* VP_DOUT[2..7] */
+ 0x40 0x11111100 0xffffff00
+ /* VP_DOUT[10..15,0..1] */
+ 0x44 0x11111111 0xffffffff
+ /* VP_DOUT[8..9] */
+ 0x48 0x00000011 0x000000ff
+ /*
+ * VP_CLKOUT3, VP_CLKIN3,
+ * VP_CLKOUT2, VP_CLKIN2
+ */
+ 0x4c 0x00111100 0x00ffff00
>;
};
};
--
2.9.3
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v2 3/4] ARM: dts: da850-evm: add the UI expander node
@ 2017-02-22 14:01 ` Bartosz Golaszewski
0 siblings, 0 replies; 13+ messages in thread
From: Bartosz Golaszewski @ 2017-02-22 14:01 UTC (permalink / raw)
To: Sekhar Nori, David Lechner, Kevin Hilman, Michael Turquette,
Patrick Titiano, Laurent Pinchart, Rob Herring, Mark Rutland,
Russell King
Cc: linux-arm-kernel, linux-kernel, devicetree, Bartosz Golaszewski
We need the expander to be probed to allow the VPIF controller to
receive interrupts from the video decoder.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
arch/arm/boot/dts/da850-evm.dts | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index dece981..3968a18 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -9,6 +9,7 @@
*/
/dts-v1/;
#include "da850.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "ti,da850-evm", "ti,da850";
@@ -78,7 +79,10 @@
DRVDD-supply = <&vbat>;
DVDD-supply = <&vbat>;
};
-
+ tca6416: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ };
};
wdt: wdt@21000 {
status = "okay";
--
2.9.3
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v2 3/4] ARM: dts: da850-evm: add the UI expander node
@ 2017-02-22 14:01 ` Bartosz Golaszewski
0 siblings, 0 replies; 13+ messages in thread
From: Bartosz Golaszewski @ 2017-02-22 14:01 UTC (permalink / raw)
To: linux-arm-kernel
We need the expander to be probed to allow the VPIF controller to
receive interrupts from the video decoder.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
arch/arm/boot/dts/da850-evm.dts | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index dece981..3968a18 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -9,6 +9,7 @@
*/
/dts-v1/;
#include "da850.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "ti,da850-evm", "ti,da850";
@@ -78,7 +79,10 @@
DRVDD-supply = <&vbat>;
DVDD-supply = <&vbat>;
};
-
+ tca6416: gpio at 20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ };
};
wdt: wdt at 21000 {
status = "okay";
--
2.9.3
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v2 3/4] ARM: dts: da850-evm: add the UI expander node
@ 2017-02-22 14:01 ` Bartosz Golaszewski
0 siblings, 0 replies; 13+ messages in thread
From: Bartosz Golaszewski @ 2017-02-22 14:01 UTC (permalink / raw)
To: Sekhar Nori, David Lechner, Kevin Hilman, Michael Turquette,
Patrick Titiano, Laurent Pinchart, Rob Herring, Mark Rutland,
Russell King
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA, Bartosz Golaszewski
We need the expander to be probed to allow the VPIF controller to
receive interrupts from the video decoder.
Signed-off-by: Bartosz Golaszewski <bgolaszewski-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
arch/arm/boot/dts/da850-evm.dts | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index dece981..3968a18 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -9,6 +9,7 @@
*/
/dts-v1/;
#include "da850.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "ti,da850-evm", "ti,da850";
@@ -78,7 +79,10 @@
DRVDD-supply = <&vbat>;
DVDD-supply = <&vbat>;
};
-
+ tca6416: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ };
};
wdt: wdt@21000 {
status = "okay";
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v2 4/4] ARM: dts: da850-evm: add the output port to the vpif node
@ 2017-02-22 14:01 ` Bartosz Golaszewski
0 siblings, 0 replies; 13+ messages in thread
From: Bartosz Golaszewski @ 2017-02-22 14:01 UTC (permalink / raw)
To: Sekhar Nori, David Lechner, Kevin Hilman, Michael Turquette,
Patrick Titiano, Laurent Pinchart, Rob Herring, Mark Rutland,
Russell King
Cc: linux-arm-kernel, linux-kernel, devicetree, Bartosz Golaszewski
Extend the vpif node with an output port with a single channel.
NOTE: this is still mostly just hardware description - the actual
driver is registered using pdata-quirks. We need the node however
for correct pin control function selection.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
arch/arm/boot/dts/da850-evm.dts | 19 +++++++++++++++----
arch/arm/boot/dts/da850.dtsi | 8 +++++++-
2 files changed, 22 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 3968a18..0298734 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -300,20 +300,31 @@
&vpif {
pinctrl-names = "default";
- pinctrl-0 = <&vpif_capture_pins>;
+ pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;
status = "okay";
+ enable-gpios = <&tca6416 7 GPIO_ACTIVE_HIGH
+ &tca6416 6 GPIO_ACTIVE_HIGH
+ &tca6416 5 GPIO_ACTIVE_LOW>;
+
/* VPIF capture port */
- port {
- vpif_ch0: endpoint@0 {
+ port@0 {
+ vpif_input_ch0: endpoint@0 {
reg = <0>;
bus-width = <8>;
};
- vpif_ch1: endpoint@1 {
+ vpif_input_ch1: endpoint@1 {
reg = <1>;
bus-width = <8>;
data-shift = <8>;
};
};
+
+ /* VPIF display port */
+ port@1 {
+ vpif_output_ch0: endpoint {
+ bus-width = <8>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 5150331..c708155 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -358,7 +358,13 @@
status = "disabled";
/* VPIF capture port */
- port {
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* VPIF display port */
+ port@1 {
#address-cells = <1>;
#size-cells = <0>;
};
--
2.9.3
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v2 4/4] ARM: dts: da850-evm: add the output port to the vpif node
@ 2017-02-22 14:01 ` Bartosz Golaszewski
0 siblings, 0 replies; 13+ messages in thread
From: Bartosz Golaszewski @ 2017-02-22 14:01 UTC (permalink / raw)
To: linux-arm-kernel
Extend the vpif node with an output port with a single channel.
NOTE: this is still mostly just hardware description - the actual
driver is registered using pdata-quirks. We need the node however
for correct pin control function selection.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
arch/arm/boot/dts/da850-evm.dts | 19 +++++++++++++++----
arch/arm/boot/dts/da850.dtsi | 8 +++++++-
2 files changed, 22 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 3968a18..0298734 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -300,20 +300,31 @@
&vpif {
pinctrl-names = "default";
- pinctrl-0 = <&vpif_capture_pins>;
+ pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;
status = "okay";
+ enable-gpios = <&tca6416 7 GPIO_ACTIVE_HIGH
+ &tca6416 6 GPIO_ACTIVE_HIGH
+ &tca6416 5 GPIO_ACTIVE_LOW>;
+
/* VPIF capture port */
- port {
- vpif_ch0: endpoint at 0 {
+ port at 0 {
+ vpif_input_ch0: endpoint at 0 {
reg = <0>;
bus-width = <8>;
};
- vpif_ch1: endpoint at 1 {
+ vpif_input_ch1: endpoint at 1 {
reg = <1>;
bus-width = <8>;
data-shift = <8>;
};
};
+
+ /* VPIF display port */
+ port at 1 {
+ vpif_output_ch0: endpoint {
+ bus-width = <8>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 5150331..c708155 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -358,7 +358,13 @@
status = "disabled";
/* VPIF capture port */
- port {
+ port at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* VPIF display port */
+ port at 1 {
#address-cells = <1>;
#size-cells = <0>;
};
--
2.9.3
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v2 4/4] ARM: dts: da850-evm: add the output port to the vpif node
@ 2017-02-22 14:01 ` Bartosz Golaszewski
0 siblings, 0 replies; 13+ messages in thread
From: Bartosz Golaszewski @ 2017-02-22 14:01 UTC (permalink / raw)
To: Sekhar Nori, David Lechner, Kevin Hilman, Michael Turquette,
Patrick Titiano, Laurent Pinchart, Rob Herring, Mark Rutland,
Russell King
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA, Bartosz Golaszewski
Extend the vpif node with an output port with a single channel.
NOTE: this is still mostly just hardware description - the actual
driver is registered using pdata-quirks. We need the node however
for correct pin control function selection.
Signed-off-by: Bartosz Golaszewski <bgolaszewski-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
arch/arm/boot/dts/da850-evm.dts | 19 +++++++++++++++----
arch/arm/boot/dts/da850.dtsi | 8 +++++++-
2 files changed, 22 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 3968a18..0298734 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -300,20 +300,31 @@
&vpif {
pinctrl-names = "default";
- pinctrl-0 = <&vpif_capture_pins>;
+ pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;
status = "okay";
+ enable-gpios = <&tca6416 7 GPIO_ACTIVE_HIGH
+ &tca6416 6 GPIO_ACTIVE_HIGH
+ &tca6416 5 GPIO_ACTIVE_LOW>;
+
/* VPIF capture port */
- port {
- vpif_ch0: endpoint@0 {
+ port@0 {
+ vpif_input_ch0: endpoint@0 {
reg = <0>;
bus-width = <8>;
};
- vpif_ch1: endpoint@1 {
+ vpif_input_ch1: endpoint@1 {
reg = <1>;
bus-width = <8>;
data-shift = <8>;
};
};
+
+ /* VPIF display port */
+ port@1 {
+ vpif_output_ch0: endpoint {
+ bus-width = <8>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 5150331..c708155 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -358,7 +358,13 @@
status = "disabled";
/* VPIF capture port */
- port {
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* VPIF display port */
+ port@1 {
#address-cells = <1>;
#size-cells = <0>;
};
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 13+ messages in thread