From: Anand Moon <linux.amoon@gmail.com>
To: Rob Herring <robh+dt@kernel.org>, Carlo Caione <carlo@caione.org>,
Kevin Hilman <khilman@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Brian Kim <brian.kim@hardkernel.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
Anand Moon <linux.amoon@gmail.com>
Subject: [PATCH] ARM64: dts: meson-gxbb-odroidc2: enable USB Host Nodes
Date: Wed, 8 Mar 2017 02:06:01 +0530 [thread overview]
Message-ID: <1488918961-4666-1-git-send-email-linux.amoon@gmail.com> (raw)
From: Anand Moon <linux.amoon@gmail.com>
update the regulator supply nodes for usb host to
enable usb host on odroid-c2
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
root@odroid64:/usr/src/odroidxu3-4.y-devel# lsusb -t
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc2/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 1: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 2: Dev 4, If 0, Class=Mass Storage, Driver=usb-storage, 480M
|__ Port 4: Dev 5, If 0, Class=Mass Storage, Driver=usb-storage, 480M
---
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index c59403a..304b676 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -64,6 +64,18 @@
reg = <0x0 0x0 0x0 0x80000000>;
};
+ usb_host_pwr: regulator-usb-pwrs {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_HOST_PWR";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
usb_otg_pwr: regulator-usb-pwrs {
compatible = "regulator-fixed";
@@ -184,6 +196,7 @@
&usb1_phy {
status = "okay";
+ phy-supply = <&usb_host_pwr>;
};
&usb0 {
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Anand Moon <linux.amoon@gmail.com>
To: Rob Herring <robh+dt@kernel.org>, Carlo Caione <carlo@caione.org>,
Kevin Hilman <khilman@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Brian Kim <brian.kim@hardkernel.com>
Cc: Anand Moon <linux.amoon@gmail.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org
Subject: [PATCH] ARM64: dts: meson-gxbb-odroidc2: enable USB Host Nodes
Date: Wed, 8 Mar 2017 02:06:01 +0530 [thread overview]
Message-ID: <1488918961-4666-1-git-send-email-linux.amoon@gmail.com> (raw)
From: Anand Moon <linux.amoon@gmail.com>
update the regulator supply nodes for usb host to
enable usb host on odroid-c2
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
root@odroid64:/usr/src/odroidxu3-4.y-devel# lsusb -t
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc2/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 1: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 2: Dev 4, If 0, Class=Mass Storage, Driver=usb-storage, 480M
|__ Port 4: Dev 5, If 0, Class=Mass Storage, Driver=usb-storage, 480M
---
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index c59403a..304b676 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -64,6 +64,18 @@
reg = <0x0 0x0 0x0 0x80000000>;
};
+ usb_host_pwr: regulator-usb-pwrs {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_HOST_PWR";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
usb_otg_pwr: regulator-usb-pwrs {
compatible = "regulator-fixed";
@@ -184,6 +196,7 @@
&usb1_phy {
status = "okay";
+ phy-supply = <&usb_host_pwr>;
};
&usb0 {
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: linux.amoon@gmail.com (Anand Moon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM64: dts: meson-gxbb-odroidc2: enable USB Host Nodes
Date: Wed, 8 Mar 2017 02:06:01 +0530 [thread overview]
Message-ID: <1488918961-4666-1-git-send-email-linux.amoon@gmail.com> (raw)
From: Anand Moon <linux.amoon@gmail.com>
update the regulator supply nodes for usb host to
enable usb host on odroid-c2
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
root at odroid64:/usr/src/odroidxu3-4.y-devel# lsusb -t
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc2/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 1: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 2: Dev 4, If 0, Class=Mass Storage, Driver=usb-storage, 480M
|__ Port 4: Dev 5, If 0, Class=Mass Storage, Driver=usb-storage, 480M
---
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index c59403a..304b676 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -64,6 +64,18 @@
reg = <0x0 0x0 0x0 0x80000000>;
};
+ usb_host_pwr: regulator-usb-pwrs {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_HOST_PWR";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
usb_otg_pwr: regulator-usb-pwrs {
compatible = "regulator-fixed";
@@ -184,6 +196,7 @@
&usb1_phy {
status = "okay";
+ phy-supply = <&usb_host_pwr>;
};
&usb0 {
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: linux.amoon@gmail.com (Anand Moon)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH] ARM64: dts: meson-gxbb-odroidc2: enable USB Host Nodes
Date: Wed, 8 Mar 2017 02:06:01 +0530 [thread overview]
Message-ID: <1488918961-4666-1-git-send-email-linux.amoon@gmail.com> (raw)
From: Anand Moon <linux.amoon@gmail.com>
update the regulator supply nodes for usb host to
enable usb host on odroid-c2
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
root at odroid64:/usr/src/odroidxu3-4.y-devel# lsusb -t
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc2/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 1: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 2: Dev 4, If 0, Class=Mass Storage, Driver=usb-storage, 480M
|__ Port 4: Dev 5, If 0, Class=Mass Storage, Driver=usb-storage, 480M
---
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index c59403a..304b676 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -64,6 +64,18 @@
reg = <0x0 0x0 0x0 0x80000000>;
};
+ usb_host_pwr: regulator-usb-pwrs {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_HOST_PWR";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
usb_otg_pwr: regulator-usb-pwrs {
compatible = "regulator-fixed";
@@ -184,6 +196,7 @@
&usb1_phy {
status = "okay";
+ phy-supply = <&usb_host_pwr>;
};
&usb0 {
--
2.7.4
next reply other threads:[~2017-03-07 22:19 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-07 20:36 Anand Moon [this message]
2017-03-07 20:36 ` [PATCH] ARM64: dts: meson-gxbb-odroidc2: enable USB Host Nodes Anand Moon
2017-03-07 20:36 ` Anand Moon
2017-03-07 20:36 ` Anand Moon
2017-03-08 17:22 ` Anand Moon
2017-03-08 17:22 ` Anand Moon
2017-03-08 17:22 ` Anand Moon
2017-03-08 17:22 ` Anand Moon
2017-03-09 13:13 ` Neil Armstrong
2017-03-09 13:13 ` Neil Armstrong
2017-03-09 13:13 ` Neil Armstrong
2017-03-09 13:13 ` Neil Armstrong
2017-03-09 17:58 ` Anand Moon
2017-03-09 17:58 ` Anand Moon
2017-03-09 17:58 ` Anand Moon
2017-03-09 17:58 ` Anand Moon
2017-03-09 19:36 ` Martin Blumenstingl
2017-03-09 19:36 ` Martin Blumenstingl
2017-03-09 19:36 ` Martin Blumenstingl
2017-03-09 19:36 ` Martin Blumenstingl
2017-03-11 6:48 ` Anand Moon
2017-03-11 6:48 ` Anand Moon
2017-03-11 6:48 ` Anand Moon
2017-03-11 6:48 ` Anand Moon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1488918961-4666-1-git-send-email-linux.amoon@gmail.com \
--to=linux.amoon@gmail.com \
--cc=brian.kim@hardkernel.com \
--cc=carlo@caione.org \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.