* [PATCH net-next 1/4] dt-bindings: net: dsa: add mt7530 binding
[not found] ` <1489420008-30795-1-git-send-email-sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
@ 2017-03-13 15:46 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
[not found] ` <1489420008-30795-2-git-send-email-sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
0 siblings, 1 reply; 3+ messages in thread
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2017-03-13 15:46 UTC (permalink / raw)
To: sean.wang-NuS5LvNUpcJWk0Htik3J/w
Cc: keyhaede-Re5JQEeQqe8AvxtiuMwx3w, devicetree-u79uwXL29TY76Z2rM5mHXA
From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Add device-tree binding for Mediatek MT7530 switch.
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
.../devicetree/bindings/net/dsa/mt7530.txt | 94 ++++++++++++++++++++++
1 file changed, 94 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/dsa/mt7530.txt
diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
new file mode 100644
index 0000000..0e50dbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
@@ -0,0 +1,94 @@
+Mediatek MT7530 Ethernet switch
+================================
+
+Required properties:
+
+- compatible: Must be compatible = "mediatek,mt7530";
+- #address-cells: Must be 1
+- #size-cells: Must be 0
+- mediatek,ethsys: Phandle to the syscon node that handles the reset.
+- mediatek,ethernet: Phandle to the syscon node that Mediatek ethernet driver
+ provides that handles the TRGMII setup used by the switch.
+ See
+ Documentation/devicetree/bindings/net/mediatek-net.txt for the detailed
+ setup on mediatek ethernet.
+- mediatek,mcm: String, should be "enabled" or "disabled" to indicate that
+ either MT7530 is the part on multi-chip module belong to MT7623A has
+ or the remotely standalone chip as the function MT7623N reference board
+ provided for.
+- core-supply: Phandle to the regulator node necessary for the core power.
+- io-supply: Phandle to the regulator node necessary for the I/O power
+ See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
+ for details for the regulator setup on these boards.
+- mediatek,reset-pin: Phandle to the pinctrl node used for the reset. Which
+ must be required if the property mediatek,mcm of specified as
+ "disabled". See
+ Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt for
+ the mediatek pintcrl setting for the details.
+
+Each port children node within ports container must have the following
+mandatory properties:
+- reg : Port address described must be 6 for CPU port
+ and from 0 to 5 for user ports.
+
+See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
+required, optional properties and how the integrated switch subnodes must
+be specified.
+
+Example:
+
+ &mdio0 {
+ switch@0 {
+ compatible = "mediatek,mt7530";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ mediatek,ethsys = <ðsys>;
+ mediatek,ethernet = <ð>;
+ mediatek,mcm = "enabled";
+ core-supply = <&mt6323_vpa_reg>;
+ io-supply = <&mt6323_vemc3v3_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ port@0 {
+ reg = <0>;
+ label = "lan0";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <ð>;
+ phy-mode = "trgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH net-next 1/4] dt-bindings: net: dsa: add mt7530 binding
[not found] ` <1489420008-30795-2-git-send-email-sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
@ 2017-03-20 22:01 ` Rob Herring
0 siblings, 0 replies; 3+ messages in thread
From: Rob Herring @ 2017-03-20 22:01 UTC (permalink / raw)
To: sean.wang-NuS5LvNUpcJWk0Htik3J/w
Cc: keyhaede-Re5JQEeQqe8AvxtiuMwx3w, devicetree-u79uwXL29TY76Z2rM5mHXA
On Mon, Mar 13, 2017 at 11:46:45PM +0800, sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org wrote:
> From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
>
> Add device-tree binding for Mediatek MT7530 switch.
>
> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> ---
> .../devicetree/bindings/net/dsa/mt7530.txt | 94 ++++++++++++++++++++++
> 1 file changed, 94 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/dsa/mt7530.txt
>
> diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
> new file mode 100644
> index 0000000..0e50dbf
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
> @@ -0,0 +1,94 @@
> +Mediatek MT7530 Ethernet switch
> +================================
> +
> +Required properties:
> +
> +- compatible: Must be compatible = "mediatek,mt7530";
> +- #address-cells: Must be 1
> +- #size-cells: Must be 0
> +- mediatek,ethsys: Phandle to the syscon node that handles the reset.
Use the reset binding?
> +- mediatek,ethernet: Phandle to the syscon node that Mediatek ethernet driver
> + provides that handles the TRGMII setup used by the switch.
> + See
> + Documentation/devicetree/bindings/net/mediatek-net.txt for the detailed
> + setup on mediatek ethernet.
> +- mediatek,mcm: String, should be "enabled" or "disabled" to indicate that
boolean instead.
> + either MT7530 is the part on multi-chip module belong to MT7623A has
> + or the remotely standalone chip as the function MT7623N reference board
> + provided for.
> +- core-supply: Phandle to the regulator node necessary for the core power.
> +- io-supply: Phandle to the regulator node necessary for the I/O power
> + See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
> + for details for the regulator setup on these boards.
> +- mediatek,reset-pin: Phandle to the pinctrl node used for the reset. Which
What's wrong with the normal pinctrl binding?
> + must be required if the property mediatek,mcm of specified as
> + "disabled". See
> + Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt for
> + the mediatek pintcrl setting for the details.
> +
> +Each port children node within ports container must have the following
s/children/child/
> +mandatory properties:
> +- reg : Port address described must be 6 for CPU port
> + and from 0 to 5 for user ports.
> +
> +See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
> +required, optional properties and how the integrated switch subnodes must
> +be specified.
> +
> +Example:
> +
> + &mdio0 {
> + switch@0 {
> + compatible = "mediatek,mt7530";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> +
> + mediatek,ethsys = <ðsys>;
> + mediatek,ethernet = <ð>;
> + mediatek,mcm = "enabled";
> + core-supply = <&mt6323_vpa_reg>;
> + io-supply = <&mt6323_vemc3v3_reg>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> + port@0 {
> + reg = <0>;
> + label = "lan0";
> + };
> +
> + port@1 {
> + reg = <1>;
> + label = "lan1";
> + };
> +
> + port@2 {
> + reg = <2>;
> + label = "lan2";
> + };
> +
> + port@3 {
> + reg = <3>;
> + label = "lan3";
> + };
> +
> + port@4 {
> + reg = <4>;
> + label = "wan";
> + };
> +
> + port@6 {
> + reg = <6>;
> + label = "cpu";
> + ethernet = <ð>;
> + phy-mode = "trgmii";
> + fixed-link {
> + speed = <1000>;
> + full-duplex;
> + };
> + };
> + };
> + };
> + };
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH net-next 1/4] dt-bindings: net: dsa: add mt7530 binding
[not found] ` <1489417070-28483-1-git-send-email-sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
@ 2017-03-13 14:57 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 3+ messages in thread
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2017-03-13 14:57 UTC (permalink / raw)
To: sean.wang-NuS5LvNUpcJWk0Htik3J/w
Cc: keyhaede-Re5JQEeQqe8AvxtiuMwx3w, devicetree-u79uwXL29TY76Z2rM5mHXA
From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Add device-tree binding for Mediatek MT7530 switch.
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
.../devicetree/bindings/net/dsa/mt7530.txt | 96 ++++++++++++++++++++++
1 file changed, 96 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/dsa/mt7530.txt
diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
new file mode 100644
index 0000000..3c52a6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
@@ -0,0 +1,96 @@
+Mediatek MT7530 Ethernet switch
+================================
+
+Required properties:
+
+- compatible: Must be compatible = "mediatek,mt7530";
+- #address-cells: Must be 1
+- #size-cells: Must be 0
+- mediatek,ethsys: Phandle to the syscon node that handles the reset.
+- mediatek,ethernet: Phandle to the syscon node that Mediatek ethernet
+ driver provides that handles the TRGMII setup used by the switch.
+ See
+ Documentation/devicetree/bindings/net/mediatek-net.txt for the
+ detailed setup on mediatek ethernet.
+- mediatek,mcm: String, should be "enabled" or "disabled" to indicate that
+ the MT7530 is the part on multi-chip module as the function MT7623A
+ has or the remote standalone chip as the function MT7623N reference
+ board provides to.
+- core-supply: Phandle to the regulator node necessary for the core power.
+- io-supply: Phandle to the regulator node necessary for the I/O power
+See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt for
+details for the regulator setup on these boards such as MT7623A or MT7623N.
+
+Optional properties:
+
+- mediatek,reset-pin: Phandle to the pinctrl node used for the reset. Which
+ must be required if the property of specified as "disabled". See
+ Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt for
+ the mediatek pintcrl setting for the details.
+
+Each port children node within ports container must have the following
+mandatory properties:
+- reg : Port address described must be 6 for CPU port
+ and from 0 to 5 for user ports.
+
+See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
+required, optional properties and how the integrated switch subnodes must
+be specified.
+
+Example:
+
+ &mdio0 {
+ switch@0 {
+ compatible = "mediatek,mt7530";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ mediatek,ethsys = <ðsys>;
+ mediatek,ethernet = <ð>;
+ mediatek,mcm = "enabled";
+ core-supply = <&mt6323_vpa_reg>;
+ io-supply = <&mt6323_vemc3v3_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ port@0 {
+ reg = <0>;
+ label = "lan0";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <ð>;
+ phy-mode = "trgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-03-20 22:01 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <1489420008-30795-1-git-send-email-sean.wang@mediatek.com>
[not found] ` <1489420008-30795-1-git-send-email-sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-03-13 15:46 ` [PATCH net-next 1/4] dt-bindings: net: dsa: add mt7530 binding sean.wang-NuS5LvNUpcJWk0Htik3J/w
[not found] ` <1489420008-30795-2-git-send-email-sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-03-20 22:01 ` Rob Herring
[not found] <1489417070-28483-1-git-send-email-sean.wang@mediatek.com>
[not found] ` <1489417070-28483-1-git-send-email-sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-03-13 14:57 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.