From: Tim Harvey <tharvey@gateworks.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 11/14] imx: ventana: add GW5904 support
Date: Mon, 13 Mar 2017 08:51:11 -0700 [thread overview]
Message-ID: <1489420274-2691-12-git-send-email-tharvey@gateworks.com> (raw)
In-Reply-To: <1489420274-2691-1-git-send-email-tharvey@gateworks.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
board/gateworks/gw_ventana/common.c | 222 ++++++++++++++++++++++++++--
board/gateworks/gw_ventana/common.h | 2 +-
board/gateworks/gw_ventana/eeprom.c | 9 +-
board/gateworks/gw_ventana/gw_ventana.c | 35 ++++-
board/gateworks/gw_ventana/gw_ventana_spl.c | 14 ++
board/gateworks/gw_ventana/ventana_eeprom.h | 1 +
configs/gwventana_gw5904_defconfig | 68 +++++++++
7 files changed, 336 insertions(+), 15 deletions(-)
create mode 100644 configs/gwventana_gw5904_defconfig
diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c
index 3dc5f88..f7e93e2 100644
--- a/board/gateworks/gw_ventana/common.c
+++ b/board/gateworks/gw_ventana/common.c
@@ -38,6 +38,19 @@ void setup_iomux_uart(void)
}
/* MMC */
+static iomux_v3_cfg_t const gw5904_emmc_pads[] = {
+ IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_RST__SD3_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+};
static iomux_v3_cfg_t const usdhc3_pads[] = {
IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
@@ -352,6 +365,41 @@ static iomux_v3_cfg_t const gw553x_gpio_pads[] = {
IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG),
};
+static iomux_v3_cfg_t const gw5904_gpio_pads[] = {
+ /* USB_HUBRST# */
+ IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG),
+ /* PANLEDG# */
+ IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG),
+ /* PANLEDR# */
+ IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG),
+ /* MX6_LOCLED# */
+ IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG),
+ /* IOEXP_PWREN# */
+ IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG),
+ /* IOEXP_IRQ# */
+ IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)),
+ /* DIOI2C_DIS# */
+ IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | DIO_PAD_CFG),
+ /* UART_RS485 */
+ IOMUX_PADS(PAD_DISP0_DAT2__GPIO4_IO23 | DIO_PAD_CFG),
+ /* UART_HALF */
+ IOMUX_PADS(PAD_DISP0_DAT3__GPIO4_IO24 | DIO_PAD_CFG),
+ /* SKT1_WDIS# */
+ IOMUX_PADS(PAD_DISP0_DAT17__GPIO5_IO11 | DIO_PAD_CFG),
+ /* SKT1_RST# */
+ IOMUX_PADS(PAD_DISP0_DAT18__GPIO5_IO12 | DIO_PAD_CFG),
+ /* SKT2_WDIS# */
+ IOMUX_PADS(PAD_DISP0_DAT19__GPIO5_IO13 | DIO_PAD_CFG),
+ /* SKT2_RST# */
+ IOMUX_PADS(PAD_GPIO_0__GPIO1_IO00 | DIO_PAD_CFG),
+ /* M2_OFF# */
+ IOMUX_PADS(PAD_SD2_DAT0__GPIO1_IO15 | DIO_PAD_CFG),
+ /* M2_WDIS# */
+ IOMUX_PADS(PAD_SD2_DAT1__GPIO1_IO14 | DIO_PAD_CFG),
+ /* M2_RST# */
+ IOMUX_PADS(PAD_SD2_DAT2__GPIO1_IO13 | DIO_PAD_CFG),
+};
+
/* Digital I/O */
struct dio_cfg gw51xx_dio[] = {
{
@@ -566,6 +614,81 @@ struct dio_cfg gw553x_dio[] = {
},
};
+struct dio_cfg gw5904_dio[] = {
+ {
+ { IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) },
+ IMX_GPIO_NR(1, 16),
+ { 0, 0 },
+ 0
+ },
+ {
+ { IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) },
+ IMX_GPIO_NR(1, 19),
+ { IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) },
+ 2
+ },
+ {
+ { IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) },
+ IMX_GPIO_NR(1, 17),
+ { IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) },
+ 3
+ },
+ {
+ {IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20) },
+ IMX_GPIO_NR(1, 20),
+ { 0, 0 },
+ 0
+ },
+ {
+ {IOMUX_PADS(PAD_NANDF_D0__GPIO2_IO00) },
+ IMX_GPIO_NR(2, 0),
+ { 0, 0 },
+ 0
+ },
+ {
+ {IOMUX_PADS(PAD_NANDF_D1__GPIO2_IO01) },
+ IMX_GPIO_NR(2, 1),
+ { 0, 0 },
+ 0
+ },
+ {
+ {IOMUX_PADS(PAD_NANDF_D2__GPIO2_IO02) },
+ IMX_GPIO_NR(2, 2),
+ { 0, 0 },
+ 0
+ },
+ {
+ {IOMUX_PADS(PAD_NANDF_D3__GPIO2_IO03) },
+ IMX_GPIO_NR(2, 3),
+ { 0, 0 },
+ 0
+ },
+ {
+ {IOMUX_PADS(PAD_NANDF_D4__GPIO2_IO04) },
+ IMX_GPIO_NR(2, 4),
+ { 0, 0 },
+ 0
+ },
+ {
+ {IOMUX_PADS(PAD_NANDF_D5__GPIO2_IO05) },
+ IMX_GPIO_NR(2, 5),
+ { 0, 0 },
+ 0
+ },
+ {
+ {IOMUX_PADS(PAD_NANDF_D6__GPIO2_IO06) },
+ IMX_GPIO_NR(2, 6),
+ { 0, 0 },
+ 0
+ },
+ {
+ {IOMUX_PADS(PAD_NANDF_D7__GPIO2_IO07) },
+ IMX_GPIO_NR(2, 7),
+ { 0, 0 },
+ 0
+ },
+};
+
/*
* Board Specific GPIO
*/
@@ -588,6 +711,7 @@ struct ventana gpio_cfg[GW_UNKNOWN] = {
.dioi2c_en = IMX_GPIO_NR(4, 5),
.pcie_sson = IMX_GPIO_NR(1, 20),
.otgpwr_en = IMX_GPIO_NR(3, 22),
+ .mmc_cd = IMX_GPIO_NR(7, 0),
},
/* GW51xx */
@@ -631,6 +755,7 @@ struct ventana gpio_cfg[GW_UNKNOWN] = {
.rs232_en = GP_RS232_EN,
.otgpwr_en = IMX_GPIO_NR(3, 22),
.vsel_pin = IMX_GPIO_NR(6, 14),
+ .mmc_cd = IMX_GPIO_NR(7, 0),
},
/* GW53xx */
@@ -654,6 +779,7 @@ struct ventana gpio_cfg[GW_UNKNOWN] = {
.rs232_en = GP_RS232_EN,
.otgpwr_en = IMX_GPIO_NR(3, 22),
.vsel_pin = IMX_GPIO_NR(6, 14),
+ .mmc_cd = IMX_GPIO_NR(7, 0),
},
/* GW54xx */
@@ -679,6 +805,7 @@ struct ventana gpio_cfg[GW_UNKNOWN] = {
.rs232_en = GP_RS232_EN,
.otgpwr_en = IMX_GPIO_NR(3, 22),
.vsel_pin = IMX_GPIO_NR(6, 14),
+ .mmc_cd = IMX_GPIO_NR(7, 0),
},
/* GW551x */
@@ -726,6 +853,24 @@ struct ventana gpio_cfg[GW_UNKNOWN] = {
.wdis = IMX_GPIO_NR(7, 12),
.otgpwr_en = IMX_GPIO_NR(3, 22),
.vsel_pin = IMX_GPIO_NR(6, 14),
+ .mmc_cd = IMX_GPIO_NR(7, 0),
+ },
+
+ /* GW5904 */
+ {
+ .gpio_pads = gw5904_gpio_pads,
+ .num_pads = ARRAY_SIZE(gw5904_gpio_pads)/2,
+ .dio_cfg = gw5904_dio,
+ .dio_num = ARRAY_SIZE(gw5904_dio),
+ .leds = {
+ IMX_GPIO_NR(4, 6),
+ IMX_GPIO_NR(4, 7),
+ IMX_GPIO_NR(4, 15),
+ },
+ .pcie_rst = IMX_GPIO_NR(1, 0),
+ .mezz_pwren = IMX_GPIO_NR(2, 19),
+ .mezz_irq = IMX_GPIO_NR(2, 18),
+ .otgpwr_en = IMX_GPIO_NR(3, 22),
},
};
@@ -834,6 +979,24 @@ void setup_iomux_gpio(int board, struct ventana_board_info *info)
gpio_direction_input(gpio_cfg[board].vsel_pin);
gpio_cfg[board].usd_vsel = !gpio_get_value(gpio_cfg[board].vsel_pin);
}
+
+ /* Anything else board specific */
+ switch(board) {
+ case GW5904:
+ gpio_request(IMX_GPIO_NR(5, 11), "skt1_wdis#");
+ gpio_direction_output(IMX_GPIO_NR(5, 11), 1);
+ gpio_request(IMX_GPIO_NR(5, 12), "skt1_rst#");
+ gpio_direction_output(IMX_GPIO_NR(5, 12), 1);
+ gpio_request(IMX_GPIO_NR(5, 13), "skt2_wdis#");
+ gpio_direction_output(IMX_GPIO_NR(5, 13), 1);
+ gpio_request(IMX_GPIO_NR(1, 15), "m2_off#");
+ gpio_direction_output(IMX_GPIO_NR(1, 15), 1);
+ gpio_request(IMX_GPIO_NR(1, 14), "m2_wdis#");
+ gpio_direction_output(IMX_GPIO_NR(1, 14), 1);
+ gpio_request(IMX_GPIO_NR(1, 13), "m2_rst#");
+ gpio_direction_output(IMX_GPIO_NR(1, 13), 1);
+ break;
+ }
}
/* setup GPIO pinmux and default configuration per baseboard and env */
@@ -995,19 +1158,60 @@ static struct fsl_esdhc_cfg usdhc_cfg = { USDHC3_BASE_ADDR };
int board_mmc_init(bd_t *bis)
{
- /* Only one USDHC controller on Ventana */
- SETUP_IOMUX_PADS(usdhc3_pads);
- usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- usdhc_cfg.max_bus_width = 4;
-
- return fsl_esdhc_initialize(bis, &usdhc_cfg);
+ struct ventana_board_info ventana_info;
+ int board_type = read_eeprom(CONFIG_I2C_GSC, &ventana_info);
+ int ret;
+
+ switch (board_type) {
+ case GW52xx:
+ case GW53xx:
+ case GW54xx:
+ case GW553x:
+ SETUP_IOMUX_PADS(usdhc3_pads);
+ usdhc_cfg.esdhc_base = USDHC3_BASE_ADDR;
+ usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ usdhc_cfg.max_bus_width = 4;
+ return fsl_esdhc_initialize(bis, &usdhc_cfg);
+ case GW5904:
+ /* usdhc3: 8bit eMMC */
+ SETUP_IOMUX_PADS(gw5904_emmc_pads);
+ usdhc_cfg.esdhc_base = USDHC3_BASE_ADDR;
+ usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ usdhc_cfg.max_bus_width = 8;
+ ret = fsl_esdhc_initialize(bis, &usdhc_cfg);
+ if (ret)
+ printf("failed registering emmc usdhc3\n");
+ return 0;
+ default:
+ /* doesn't have MMC */
+ return -1;
+ }
}
int board_mmc_getcd(struct mmc *mmc)
{
+ struct ventana_board_info ventana_info;
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int board = read_eeprom(CONFIG_I2C_GSC, &ventana_info);
+ int gpio = gpio_cfg[board].mmc_cd;
+
/* Card Detect */
- gpio_request(GP_SD3_CD, "sd_cd");
- gpio_direction_input(GP_SD3_CD);
- return !gpio_get_value(GP_SD3_CD);
+ switch (board) {
+ case GW5904:
+ /* emmc is always present */
+ if (cfg->esdhc_base == USDHC3_BASE_ADDR)
+ return 1;
+ break;
+ }
+
+ if (gpio) {
+ gpio_request(gpio, "sd_cd");
+ gpio_direction_input(gpio);
+ debug("%s: gpio%d=%d\n", __func__, gpio, gpio_get_value(gpio));
+ return !gpio_get_value(gpio);
+ }
+
+ return -1;
}
+
#endif /* CONFIG_FSL_ESDHC */
diff --git a/board/gateworks/gw_ventana/common.h b/board/gateworks/gw_ventana/common.h
index 18909a0..3eb4c59 100644
--- a/board/gateworks/gw_ventana/common.h
+++ b/board/gateworks/gw_ventana/common.h
@@ -13,7 +13,6 @@
/* GPIO's common to all baseboards */
#define GP_PHY_RST IMX_GPIO_NR(1, 30)
-#define GP_SD3_CD IMX_GPIO_NR(7, 0)
#define GP_RS232_EN IMX_GPIO_NR(2, 11)
#define GP_MSATA_SEL IMX_GPIO_NR(2, 8)
@@ -79,6 +78,7 @@ struct ventana {
int rs232_en;
int otgpwr_en;
int vsel_pin;
+ int mmc_cd;
/* various features */
bool usd_vsel;
};
diff --git a/board/gateworks/gw_ventana/eeprom.c b/board/gateworks/gw_ventana/eeprom.c
index 1382e5d..9a1033a 100644
--- a/board/gateworks/gw_ventana/eeprom.c
+++ b/board/gateworks/gw_ventana/eeprom.c
@@ -64,6 +64,7 @@ read_eeprom(int bus, struct ventana_board_info *info)
if (strncasecmp((const char *)info->model, "GW5400-A", 8) == 0)
baseboard = '0';
+ type = GW_UNKNOWN;
switch (baseboard) {
case '0': /* original GW5400-A prototype */
type = GW54proto;
@@ -91,10 +92,10 @@ read_eeprom(int bus, struct ventana_board_info *info)
type = GW553x;
break;
}
- /* fall through */
- default:
- printf("EEPROM: Unknown model in EEPROM: %s\n", info->model);
- type = GW_UNKNOWN;
+ break;
+ case '9':
+ if (info->model[4] == '0' && info->model[5] == '4')
+ type = GW5904;
break;
}
return type;
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index 3f9d2f7..0768799 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -132,8 +132,9 @@ static void setup_iomux_enet(int gpio)
/* toggle PHY_RST# */
gpio_request(gpio, "phy_rst#");
gpio_direction_output(gpio, 0);
- mdelay(2);
+ mdelay(10);
gpio_set_value(gpio, 1);
+ mdelay(100);
}
#ifdef CONFIG_USB_EHCI_MX6
@@ -232,6 +233,38 @@ int board_phy_config(struct phy_device *phydev)
return 0;
}
+#ifdef CONFIG_MV88E61XX_SWITCH
+int mv88e61xx_hw_reset(struct phy_device *phydev)
+{
+ struct mii_dev *bus = phydev->bus;
+
+ /* GPIO[0] output, CLK125 */
+ debug("enabling RGMII_REFCLK\n");
+ bus->write(bus, 0x1c /*MV_GLOBAL2*/, 0,
+ 0x1a /*MV_SCRATCH_MISC*/,
+ (1 << 15) | (0x62 /*MV_GPIO_DIR*/ << 8) | 0xfe);
+ bus->write(bus, 0x1c /*MV_GLOBAL2*/, 0,
+ 0x1a /*MV_SCRATCH_MISC*/,
+ (1 << 15) | (0x68 /*MV_GPIO01_CNTL*/ << 8) | 7);
+
+ /* RGMII delay - Physical Control register bit[15:14] */
+ debug("setting port%d RGMII rx/tx delay\n", CONFIG_MV88E61XX_CPU_PORT);
+ /* forced 1000mbps full-duplex link */
+ bus->write(bus, 0x10 + CONFIG_MV88E61XX_CPU_PORT, 0, 1, 0xc0fe);
+ phydev->autoneg = AUTONEG_DISABLE;
+ phydev->speed = SPEED_1000;
+ phydev->duplex = DUPLEX_FULL;
+
+ /* LED configuration: 7:4-green (8=Activity) 3:0 amber (9=10Link) */
+ bus->write(bus, 0x10, 0, 0x16, 0x8089);
+ bus->write(bus, 0x11, 0, 0x16, 0x8089);
+ bus->write(bus, 0x12, 0, 0x16, 0x8089);
+ bus->write(bus, 0x13, 0, 0x16, 0x8089);
+
+ return 0;
+}
+#endif // CONFIG_MV88E61XX_SWITCH
+
int board_eth_init(bd_t *bis)
{
#ifdef CONFIG_FEC_MXC
diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c
index 8cc2a57..136b5fc 100644
--- a/board/gateworks/gw_ventana/gw_ventana_spl.c
+++ b/board/gateworks/gw_ventana/gw_ventana_spl.c
@@ -608,6 +608,20 @@ void board_init_f(ulong dummy)
memset(__bss_start, 0, __bss_end - __bss_start);
}
+void board_boot_order(u32 *spl_boot_list)
+{
+ spl_boot_list[0] = spl_boot_device();
+ switch (spl_boot_list[0]) {
+ case BOOT_DEVICE_NAND:
+ spl_boot_list[1] = BOOT_DEVICE_MMC1;
+ spl_boot_list[2] = BOOT_DEVICE_UART;
+ break;
+ case BOOT_DEVICE_MMC1:
+ spl_boot_list[1] = BOOT_DEVICE_UART;
+ break;
+ }
+}
+
/* called from board_init_r after gd setup if CONFIG_SPL_BOARD_INIT defined */
/* its our chance to print info about boot device */
void spl_board_init(void)
diff --git a/board/gateworks/gw_ventana/ventana_eeprom.h b/board/gateworks/gw_ventana/ventana_eeprom.h
index 9ffad58..bacaf5a 100644
--- a/board/gateworks/gw_ventana/ventana_eeprom.h
+++ b/board/gateworks/gw_ventana/ventana_eeprom.h
@@ -112,6 +112,7 @@ enum {
GW551x,
GW552x,
GW553x,
+ GW5904,
GW_UNKNOWN,
GW_BADCRC,
};
diff --git a/configs/gwventana_gw5904_defconfig b/configs/gwventana_gw5904_defconfig
new file mode 100644
index 0000000..2a95763
--- /dev/null
+++ b/configs/gwventana_gw5904_defconfig
@@ -0,0 +1,68 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_TARGET_GW_VENTANA=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_VIDEO=y
+CONFIG_SPL_STACK_R_ADDR=0x18000000
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL"
+CONFIG_BOOTDELAY=3
+# CONFIG_SYS_STDIO_DEREGISTER is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_DMA_SUPPORT=y
+CONFIG_SPL_OS_BOOT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="Ventana > "
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_UBI=y
+CONFIG_DM=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USB_GADGET=y
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Gateworks"
+CONFIG_G_DNL_VENDOR_NUM=0x0525
+CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
+# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_OF_LIBFDT=y
+CONFIG_FDT_FIXUP_PARTITIONS=y
+CONFIG_MV88E61XX_SWITCH=y
+CONFIG_MV88E61XX_CPU_PORT=5
+CONFIG_MV88E61XX_PHY_PORTS=0xf
+CONFIG_MV88E61XX_FIXED_PORTS=0x0
+
--
2.7.4
next prev parent reply other threads:[~2017-03-13 15:51 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-13 15:51 [U-Boot] [PATCH 00/14] Gateworks Ventana add support for new boards Tim Harvey
2017-03-13 15:51 ` [U-Boot] [PATCH 01/14] imx: ventana: add additional DRAM configurations Tim Harvey
2017-03-17 11:00 ` Stefano Babic
2017-03-13 15:51 ` [U-Boot] [PATCH 02/14] imx: ventana: config: add gzwrite support Tim Harvey
2017-03-17 11:00 ` Stefano Babic
2017-03-13 15:51 ` [U-Boot] [PATCH 03/14] imx: ventana: move mmc_init to common Tim Harvey
2017-03-17 11:00 ` Stefano Babic
2017-03-13 15:51 ` [U-Boot] [PATCH 04/14] imx: ventana: use mmc_root in boot scripts Tim Harvey
2017-03-17 11:01 ` Stefano Babic
2017-03-13 15:51 ` [U-Boot] [PATCH 05/14] imx: ventana: change name of rs232_en to indicate polarity Tim Harvey
2017-03-17 11:01 ` Stefano Babic
2017-03-13 15:51 ` [U-Boot] [PATCH 06/14] imx: ventana: fix hwconfig Tim Harvey
2017-03-17 11:02 ` Stefano Babic
2017-03-13 15:51 ` [U-Boot] [PATCH 07/14] imx: ventana: make OTG VBUS power enable board specific Tim Harvey
2017-03-17 11:02 ` Stefano Babic
2017-03-13 15:51 ` [U-Boot] [PATCH 08/14] imx: ventana: make SD3_VSELECT " Tim Harvey
2017-03-17 11:02 ` Stefano Babic
2017-03-13 15:51 ` [U-Boot] [PATCH 09/14] imx: ventana: add EMMC configuration Tim Harvey
2017-03-13 15:51 ` [U-Boot] [PATCH 10/14] drivers: net: add MV88E6xx to Kconfig Tim Harvey
2017-03-17 10:59 ` Stefano Babic
2017-03-17 13:13 ` Tim Harvey
2017-03-17 13:27 ` Stefano Babic
2017-03-17 14:29 ` [U-Boot] [PATCH v2 10/14] drivers: net: phy: add MV88E6xx options " Tim Harvey
2017-03-19 17:05 ` Stefano Babic
2017-03-19 17:47 ` Joe Hershberger
2017-03-17 14:30 ` [U-Boot] [PATCH v2 11/14] imx: ventana: add GW5904 support Tim Harvey
2017-03-17 14:31 ` [U-Boot] [PATCH v2 12/14] imx: ventana: add GW560x support Tim Harvey
2017-03-13 15:51 ` Tim Harvey [this message]
2017-03-17 11:09 ` [U-Boot] [PATCH 11/14] imx: ventana: add GW5904 support Stefano Babic
2017-03-13 15:51 ` [U-Boot] [PATCH 12/14] imx: ventana: add GW560x support Tim Harvey
2017-03-17 11:12 ` Stefano Babic
2017-03-13 15:51 ` [U-Boot] [PATCH 13/14] imx: ventana: add GW5903 support Tim Harvey
2017-03-17 11:13 ` Stefano Babic
2017-03-17 14:32 ` [U-Boot] [PATCH v2 " Tim Harvey
2017-03-13 15:51 ` [U-Boot] [PATCH 14/14] imx: ventana: config: add EMMC boot options Tim Harvey
2017-03-17 11:00 ` [U-Boot] [PATCH 00/14] Gateworks Ventana add support for new boards Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1489420274-2691-12-git-send-email-tharvey@gateworks.com \
--to=tharvey@gateworks.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.