* [PATCH 01/17] ls2080ardb: add MACHINEOVERRES fsl-lsch3/ls2080a
@ 2017-03-14 9:32 Chunrong Guo
2017-03-14 9:32 ` [PATCH 02/17] ls1021atwr: switch to new UBOOT_CONFIG format Chunrong Guo
` (15 more replies)
0 siblings, 16 replies; 19+ messages in thread
From: Chunrong Guo @ 2017-03-14 9:32 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
conf/machine/ls2080ardb.conf | 2 ++
1 file changed, 2 insertions(+)
diff --git a/conf/machine/ls2080ardb.conf b/conf/machine/ls2080ardb.conf
index 30dfe20..e6e4a5a 100644
--- a/conf/machine/ls2080ardb.conf
+++ b/conf/machine/ls2080ardb.conf
@@ -5,6 +5,8 @@
# with ARM Cortext-A57 core
#@MAINTAINER: Zongchun Yu <Zongchun.Yu@nxp.com>
+MACHINEOVERRIDES =. "fsl-lsch3:ls2080a:"
+
require conf/machine/include/qoriq-arm64.inc
require conf/machine/include/arm/arch-arm64.inc
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 02/17] ls1021atwr: switch to new UBOOT_CONFIG format
2017-03-14 9:32 [PATCH 01/17] ls2080ardb: add MACHINEOVERRES fsl-lsch3/ls2080a Chunrong Guo
@ 2017-03-14 9:32 ` Chunrong Guo
2017-03-14 9:32 ` [PATCH 03/17] init-ifupdown: use consistent interfaces for qoriq Chunrong Guo
` (14 subsequent siblings)
15 siblings, 0 replies; 19+ messages in thread
From: Chunrong Guo @ 2017-03-14 9:32 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Append the binary name if the final binary is not u-boot.bin.
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
conf/machine/ls1021atwr.conf | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/conf/machine/ls1021atwr.conf b/conf/machine/ls1021atwr.conf
index ce33bb6..457703e 100644
--- a/conf/machine/ls1021atwr.conf
+++ b/conf/machine/ls1021atwr.conf
@@ -13,11 +13,11 @@ require conf/machine/include/tune-cortexa7.inc
DEFAULTTUNE = "cortexa7hf-neon"
UBOOT_CONFIG ??= "sdcard-ifc sdcard-qspi lpuart qspi secure-boot nor"
-UBOOT_CONFIG[nor] = "ls1021atwr_nor_config"
-UBOOT_CONFIG[sdcard-ifc] = "ls1021atwr_sdcard_ifc_config"
-UBOOT_CONFIG[sdcard-qspi] = "ls1021atwr_sdcard_qspi_config"
-UBOOT_CONFIG[lpuart] = "ls1021atwr_nor_lpuart_config"
-UBOOT_CONFIG[qspi] = "ls1021atwr_qspi_config"
+UBOOT_CONFIG[nor] = "ls1021atwr_nor_config,,u-boot-dtb.bin"
+UBOOT_CONFIG[sdcard-ifc] = "ls1021atwr_sdcard_ifc_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[sdcard-qspi] = "ls1021atwr_sdcard_qspi_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[lpuart] = "ls1021atwr_nor_lpuart_config,,u-boot-dtb.bin"
+UBOOT_CONFIG[qspi] = "ls1021atwr_qspi_config,,u-boot-dtb.bin"
UBOOT_CONFIG[secure-boot] = "ls1021atwr_nor_SECURE_BOOT_config"
QE_UCODE="iram_Type_A_LS1021a_r1.0.bin"
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 03/17] init-ifupdown: use consistent interfaces for qoriq
2017-03-14 9:32 [PATCH 01/17] ls2080ardb: add MACHINEOVERRES fsl-lsch3/ls2080a Chunrong Guo
2017-03-14 9:32 ` [PATCH 02/17] ls1021atwr: switch to new UBOOT_CONFIG format Chunrong Guo
@ 2017-03-14 9:32 ` Chunrong Guo
2017-03-14 9:32 ` [PATCH 04/17] openssl: use linux-aarch64 target for aarch64 Chunrong Guo
` (13 subsequent siblings)
15 siblings, 0 replies; 19+ messages in thread
From: Chunrong Guo @ 2017-03-14 9:32 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Let all qoriq boards share the same interfaces file, no difference
between qoriq-ppc and qoriq-arm.
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
recipes-core/init-ifupdown/init-ifupdown/qoriq-ppc/interfaces | 6 ------
recipes-core/init-ifupdown/init-ifupdown/qoriq/interfaces | 6 ++++++
2 files changed, 6 insertions(+), 6 deletions(-)
delete mode 100644 recipes-core/init-ifupdown/init-ifupdown/qoriq-ppc/interfaces
create mode 100644 recipes-core/init-ifupdown/init-ifupdown/qoriq/interfaces
diff --git a/recipes-core/init-ifupdown/init-ifupdown/qoriq-ppc/interfaces b/recipes-core/init-ifupdown/init-ifupdown/qoriq-ppc/interfaces
deleted file mode 100644
index 3737c8b..0000000
--- a/recipes-core/init-ifupdown/init-ifupdown/qoriq-ppc/interfaces
+++ /dev/null
@@ -1,6 +0,0 @@
-# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
-
-# The loopback interface
-auto lo
-iface lo inet loopback
-
diff --git a/recipes-core/init-ifupdown/init-ifupdown/qoriq/interfaces b/recipes-core/init-ifupdown/init-ifupdown/qoriq/interfaces
new file mode 100644
index 0000000..3737c8b
--- /dev/null
+++ b/recipes-core/init-ifupdown/init-ifupdown/qoriq/interfaces
@@ -0,0 +1,6 @@
+# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
+
+# The loopback interface
+auto lo
+iface lo inet loopback
+
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 04/17] openssl: use linux-aarch64 target for aarch64
2017-03-14 9:32 [PATCH 01/17] ls2080ardb: add MACHINEOVERRES fsl-lsch3/ls2080a Chunrong Guo
2017-03-14 9:32 ` [PATCH 02/17] ls1021atwr: switch to new UBOOT_CONFIG format Chunrong Guo
2017-03-14 9:32 ` [PATCH 03/17] init-ifupdown: use consistent interfaces for qoriq Chunrong Guo
@ 2017-03-14 9:32 ` Chunrong Guo
2017-03-14 9:32 ` [PATCH 05/17] ls1012ardb: add machine file Chunrong Guo
` (12 subsequent siblings)
15 siblings, 0 replies; 19+ messages in thread
From: Chunrong Guo @ 2017-03-14 9:32 UTC (permalink / raw)
To: meta-freescale; +Cc: Mircea Pop
From: Mircea Pop <mircea.pop@nxp.com>
Update is required in order to exploit the ARM-CE primitives available on
ARMv8 platfom. Performance goes from 6 Gbps to 60Gbps for 8K frame length
Signed-off-by: Mircea Pop <mircea.pop@nxp.com>
---
recipes-connectivity/openssl/openssl-qoriq.inc | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/recipes-connectivity/openssl/openssl-qoriq.inc b/recipes-connectivity/openssl/openssl-qoriq.inc
index dfafaaf..e3b0e0f 100644
--- a/recipes-connectivity/openssl/openssl-qoriq.inc
+++ b/recipes-connectivity/openssl/openssl-qoriq.inc
@@ -95,7 +95,7 @@ do_configure () {
target=linux-elf-armeb
;;
linux-aarch64*)
- target=linux-generic64
+ target=linux-aarch64
;;
linux-sh3)
target=debian-sh3
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 05/17] ls1012ardb: add machine file
2017-03-14 9:32 [PATCH 01/17] ls2080ardb: add MACHINEOVERRES fsl-lsch3/ls2080a Chunrong Guo
` (2 preceding siblings ...)
2017-03-14 9:32 ` [PATCH 04/17] openssl: use linux-aarch64 target for aarch64 Chunrong Guo
@ 2017-03-14 9:32 ` Chunrong Guo
2017-03-21 14:34 ` Bob Cochran
2017-03-14 9:32 ` [PATCH 06/17] ls1012ardb-32b: " Chunrong Guo
` (11 subsequent siblings)
15 siblings, 1 reply; 19+ messages in thread
From: Chunrong Guo @ 2017-03-14 9:32 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
conf/machine/ls1012ardb.conf | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
create mode 100644 conf/machine/ls1012ardb.conf
diff --git a/conf/machine/ls1012ardb.conf b/conf/machine/ls1012ardb.conf
new file mode 100644
index 0000000..9298a86
--- /dev/null
+++ b/conf/machine/ls1012ardb.conf
@@ -0,0 +1,21 @@
+#@TYPE: Machine
+#@NAME: NXP LS1012ARDB board
+#@SOC: LSCH2
+#@DESCRIPTION: Machine configuration for NXP QorIQ LS1012ARDB
+# with ARM Cortext-A53 core
+#@MAINTAINER: Zongchun Yu <Zongchun.Yu@nxp.com>
+
+MACHINEOVERRIDES =. "fsl-lsch2:ls1012a:"
+
+require conf/machine/include/qoriq-arm64.inc
+require conf/machine/include/arm/arch-arm64.inc
+
+UBOOT_CONFIG ??= "qspi-secure-boot qspi"
+UBOOT_CONFIG[qspi] = "ls1012ardb_qspi_defconfig,,u-boot-dtb.bin"
+UBOOT_CONFIG[qspi-secure-boot] = "ls1012ardb_qspi_SECURE_BOOT_defconfig,,u-boot-dtb.bin"
+
+KERNEL_DEVICETREE ?= "freescale/fsl-ls1012a-rdb.dtb"
+KERNEL_DEFCONFIG ?= "${S}/arch/arm64/configs/defconfig"
+
+EXTRA_IMAGEDEPENDS += "ppa ls2-rcw"
+USE_VT = "0"
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 06/17] ls1012ardb-32b: add machine file
2017-03-14 9:32 [PATCH 01/17] ls2080ardb: add MACHINEOVERRES fsl-lsch3/ls2080a Chunrong Guo
` (3 preceding siblings ...)
2017-03-14 9:32 ` [PATCH 05/17] ls1012ardb: add machine file Chunrong Guo
@ 2017-03-14 9:32 ` Chunrong Guo
2017-03-14 9:32 ` [PATCH 07/17] ls1012afrdm: " Chunrong Guo
` (10 subsequent siblings)
15 siblings, 0 replies; 19+ messages in thread
From: Chunrong Guo @ 2017-03-14 9:32 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
conf/machine/ls1012ardb-32b.conf | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 conf/machine/ls1012ardb-32b.conf
diff --git a/conf/machine/ls1012ardb-32b.conf b/conf/machine/ls1012ardb-32b.conf
new file mode 100644
index 0000000..63e7e46
--- /dev/null
+++ b/conf/machine/ls1012ardb-32b.conf
@@ -0,0 +1,28 @@
+#@TYPE: Machine
+#@NAME: NXP LS1012ARDB board
+#@SOC: LSCH2
+#@DESCRIPTION: Machine configuration for NXP QorIQ LS1012ARDB
+# with ARM Cortext-A53 core
+#@MAINTAINER: Zongchun Yu <Zongchun.Yu@nxp.com>
+
+MACHINEOVERRIDES =. "fsl-lsch2:fsl-lsch2-32b:ls1012a:"
+
+require conf/machine/include/qoriq-arm.inc
+require conf/machine/include/arm/arch-arm64.inc
+
+DEFAULTTUNE = "armv7ahf-neon"
+
+UBOOT_CONFIG ??= "qspi-secure-boot qspi"
+UBOOT_CONFIG[qspi] = "ls1012ardb_qspi_defconfig,,u-boot-dtb.bin"
+UBOOT_CONFIG[qspi-secure-boot] = "ls1012ardb_qspi_SECURE_BOOT_defconfig,,u-boot-dtb.bin"
+
+KERNEL_IMAGETYPE = "zImage"
+KERNEL_DEVICETREE ?= "freescale/fsl-ls1012a-rdb.dtb"
+KERNEL_DEFCONFIG ?= "${S}/arch/arm/configs/multi_v7_defconfig"
+
+EXTRA_IMAGEDEPENDS += "ppa ls2-rcw"
+USE_VT = "0"
+
+require conf/multilib.conf
+MULTILIBS ?= "multilib:lib64"
+DEFAULTTUNE_virtclass-multilib-lib64 ?= "aarch64"
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 07/17] ls1012afrdm: add machine file
2017-03-14 9:32 [PATCH 01/17] ls2080ardb: add MACHINEOVERRES fsl-lsch3/ls2080a Chunrong Guo
` (4 preceding siblings ...)
2017-03-14 9:32 ` [PATCH 06/17] ls1012ardb-32b: " Chunrong Guo
@ 2017-03-14 9:32 ` Chunrong Guo
2017-03-14 9:32 ` [PATCH 08/17] ls1012afrdm-32b: " Chunrong Guo
` (9 subsequent siblings)
15 siblings, 0 replies; 19+ messages in thread
From: Chunrong Guo @ 2017-03-14 9:32 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
conf/machine/ls1012afrdm.conf | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
create mode 100644 conf/machine/ls1012afrdm.conf
diff --git a/conf/machine/ls1012afrdm.conf b/conf/machine/ls1012afrdm.conf
new file mode 100644
index 0000000..f7d98a1
--- /dev/null
+++ b/conf/machine/ls1012afrdm.conf
@@ -0,0 +1,20 @@
+#@TYPE: Machine
+#@NAME: NXP LS1012AFRDM board
+#@SOC: LSCH2
+#@DESCRIPTION: Machine configuration for NXP QorIQ LS1012ARDB
+# with ARM Cortext-A53 core
+#@MAINTAINER: Zongchun Yu <Zongchun.Yu@nxp.com>
+
+MACHINEOVERRIDES =. "fsl-lsch2:ls1012a:"
+
+require conf/machine/include/qoriq-arm64.inc
+require conf/machine/include/arm/arch-arm64.inc
+
+UBOOT_CONFIG ??= "qspi"
+UBOOT_CONFIG[qspi] = "ls1012afrdm_qspi_defconfig,,u-boot-dtb.bin"
+
+KERNEL_DEVICETREE ?= "freescale/fsl-ls1012a-frdm.dtb"
+KERNEL_DEFCONFIG ?= "${S}/arch/arm64/configs/defconfig"
+
+EXTRA_IMAGEDEPENDS += "ppa ls2-rcw"
+USE_VT = "0"
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 08/17] ls1012afrdm-32b: add machine file
2017-03-14 9:32 [PATCH 01/17] ls2080ardb: add MACHINEOVERRES fsl-lsch3/ls2080a Chunrong Guo
` (5 preceding siblings ...)
2017-03-14 9:32 ` [PATCH 07/17] ls1012afrdm: " Chunrong Guo
@ 2017-03-14 9:32 ` Chunrong Guo
2017-03-14 9:32 ` [PATCH 09/17] ls1046ardb: build emmc u-boot Chunrong Guo
` (8 subsequent siblings)
15 siblings, 0 replies; 19+ messages in thread
From: Chunrong Guo @ 2017-03-14 9:32 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
conf/machine/ls1012afrdm-32b.conf | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 conf/machine/ls1012afrdm-32b.conf
diff --git a/conf/machine/ls1012afrdm-32b.conf b/conf/machine/ls1012afrdm-32b.conf
new file mode 100644
index 0000000..e720ba3
--- /dev/null
+++ b/conf/machine/ls1012afrdm-32b.conf
@@ -0,0 +1,27 @@
+#@TYPE: Machine
+#@NAME: NXP LS1012AFRDM board
+#@SOC: LSCH2
+#@DESCRIPTION: Machine configuration for NXP QorIQ LS1012ARDB
+# with ARM Cortext-A53 core
+#@MAINTAINER: Zongchun Yu <Zongchun.Yu@nxp.com>
+
+MACHINEOVERRIDES =. "fsl-lsch2:fsl-lsch2-32b:ls1012a:"
+
+require conf/machine/include/qoriq-arm.inc
+require conf/machine/include/arm/arch-arm64.inc
+
+DEFAULTTUNE = "armv7ahf-neon"
+
+UBOOT_CONFIG ??= "qspi"
+UBOOT_CONFIG[qspi] = "ls1012afrdm_qspi_defconfig,,u-boot-dtb.bin"
+
+KERNEL_IMAGETYPE = "zImage"
+KERNEL_DEVICETREE ?= "freescale/fsl-ls1012a-frdm.dtb"
+KERNEL_DEFCONFIG ?= "${S}/arch/arm/configs/multi_v7_defconfig"
+
+EXTRA_IMAGEDEPENDS += "ppa ls2-rcw"
+USE_VT = "0"
+
+require conf/multilib.conf
+MULTILIBS ?= "multilib:lib64"
+DEFAULTTUNE_virtclass-multilib-lib64 ?= "aarch64"
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 09/17] ls1046ardb: build emmc u-boot
2017-03-14 9:32 [PATCH 01/17] ls2080ardb: add MACHINEOVERRES fsl-lsch3/ls2080a Chunrong Guo
` (6 preceding siblings ...)
2017-03-14 9:32 ` [PATCH 08/17] ls1012afrdm-32b: " Chunrong Guo
@ 2017-03-14 9:32 ` Chunrong Guo
2017-03-14 9:32 ` [PATCH 10/17] ls1043ardb-32b: update u-boot configs Chunrong Guo
` (7 subsequent siblings)
15 siblings, 0 replies; 19+ messages in thread
From: Chunrong Guo @ 2017-03-14 9:32 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
conf/machine/ls1046ardb.conf | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/conf/machine/ls1046ardb.conf b/conf/machine/ls1046ardb.conf
index 553950c..43e2646 100644
--- a/conf/machine/ls1046ardb.conf
+++ b/conf/machine/ls1046ardb.conf
@@ -9,7 +9,8 @@ MACHINEOVERRIDES =. "fsl-lsch2:ls1046a:"
require conf/machine/include/qoriq-arm64.inc
require conf/machine/include/arm/arch-arm64.inc
-UBOOT_CONFIG ??= "sdcard qspi-secure-boot qspi"
+UBOOT_CONFIG ??= "emmc sdcard qspi-secure-boot qspi"
+UBOOT_CONFIG[emmc] = "ls1046ardb_emmc_defconfig,,u-boot-with-spl-pbl.bin"
UBOOT_CONFIG[sdcard] = "ls1046ardb_sdcard_config,,u-boot-with-spl-pbl.bin"
UBOOT_CONFIG[qspi] = "ls1046ardb_qspi_config,,u-boot-dtb.bin"
UBOOT_CONFIG[qspi-secure-boot] = "ls1046ardb_qspi_SECURE_BOOT_config,,u-boot-dtb.bin"
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 10/17] ls1043ardb-32b: update u-boot configs
2017-03-14 9:32 [PATCH 01/17] ls2080ardb: add MACHINEOVERRES fsl-lsch3/ls2080a Chunrong Guo
` (7 preceding siblings ...)
2017-03-14 9:32 ` [PATCH 09/17] ls1046ardb: build emmc u-boot Chunrong Guo
@ 2017-03-14 9:32 ` Chunrong Guo
2017-03-14 9:32 ` [PATCH 11/17] ls1043ardb-32b: KERNEL_DEFCONFIG use multi_v7_defconfig Chunrong Guo
` (6 subsequent siblings)
15 siblings, 0 replies; 19+ messages in thread
From: Chunrong Guo @ 2017-03-14 9:32 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
conf/machine/ls1043ardb-32b.conf | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/conf/machine/ls1043ardb-32b.conf b/conf/machine/ls1043ardb-32b.conf
index 7551413..ae21343 100644
--- a/conf/machine/ls1043ardb-32b.conf
+++ b/conf/machine/ls1043ardb-32b.conf
@@ -12,10 +12,10 @@ require conf/machine/include/arm/arch-arm64.inc
DEFAULTTUNE = "armv7ahf-neon"
UBOOT_CONFIG ??= "nand sdcard nor"
-UBOOT_CONFIG[nor] = "ls1043ardb_aarch32_config,,u-boot-dtb.bin"
-UBOOT_CONFIG[nand] = "ls1043ardb_aarch32_nand_config,,u-boot-with-spl-pbl.bin"
-UBOOT_CONFIG[sdcard] = "ls1043ardb_aarch32_sdcard_config,,u-boot-with-spl-pbl.bin"
-UBOOT_CONFIG[secure-boot] = "ls1043ardb_aarch32_SECURE_BOOT_defconfig,,u-boot-dtb.bin"
+UBOOT_CONFIG[nor] = "ls1043ardb_config,,u-boot-dtb.bin"
+UBOOT_CONFIG[nand] = "ls1043ardb_nand_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[sdcard] = "ls1043ardb_sdcard_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[secure-boot] = "ls1043ardb_SECURE_BOOT_defconfig,,u-boot-dtb.bin"
QE_UCODE = "iram_Type_A_LS1021a_r1.0.bin"
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 11/17] ls1043ardb-32b: KERNEL_DEFCONFIG use multi_v7_defconfig
2017-03-14 9:32 [PATCH 01/17] ls2080ardb: add MACHINEOVERRES fsl-lsch3/ls2080a Chunrong Guo
` (8 preceding siblings ...)
2017-03-14 9:32 ` [PATCH 10/17] ls1043ardb-32b: update u-boot configs Chunrong Guo
@ 2017-03-14 9:32 ` Chunrong Guo
2017-03-14 9:32 ` [PATCH 12/17] ls1043ardb-32b: build ppa Chunrong Guo
` (5 subsequent siblings)
15 siblings, 0 replies; 19+ messages in thread
From: Chunrong Guo @ 2017-03-14 9:32 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
conf/machine/ls1043ardb-32b.conf | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/conf/machine/ls1043ardb-32b.conf b/conf/machine/ls1043ardb-32b.conf
index ae21343..7ce97b8 100644
--- a/conf/machine/ls1043ardb-32b.conf
+++ b/conf/machine/ls1043ardb-32b.conf
@@ -20,7 +20,7 @@ UBOOT_CONFIG[secure-boot] = "ls1043ardb_SECURE_BOOT_defconfig,,u-boot-dtb.bin"
QE_UCODE = "iram_Type_A_LS1021a_r1.0.bin"
KERNEL_DEVICETREE ?= "freescale/fsl-ls1043a-rdb.dtb freescale/fsl-ls1043a-rdb-usdpaa.dtb"
-KERNEL_DEFCONFIG ?= "${S}/arch/arm/configs/ls_aarch32_defconfig"
+KERNEL_DEFCONFIG ?= "${S}/arch/arm/configs/multi_v7_defconfig"
SERIAL_CONSOLES ?= "115200;ttyS0 115200;ttyAMA0"
SERIAL_CONSOLES_CHECK ?= "${SERIAL_CONSOLES}"
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 12/17] ls1043ardb-32b: build ppa
2017-03-14 9:32 [PATCH 01/17] ls2080ardb: add MACHINEOVERRES fsl-lsch3/ls2080a Chunrong Guo
` (9 preceding siblings ...)
2017-03-14 9:32 ` [PATCH 11/17] ls1043ardb-32b: KERNEL_DEFCONFIG use multi_v7_defconfig Chunrong Guo
@ 2017-03-14 9:32 ` Chunrong Guo
2017-03-14 9:32 ` [PATCH 13/17] ls1046ardb-32b: update u-boot configs Chunrong Guo
` (4 subsequent siblings)
15 siblings, 0 replies; 19+ messages in thread
From: Chunrong Guo @ 2017-03-14 9:32 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
conf/machine/ls1043ardb-32b.conf | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/conf/machine/ls1043ardb-32b.conf b/conf/machine/ls1043ardb-32b.conf
index 7ce97b8..5703718 100644
--- a/conf/machine/ls1043ardb-32b.conf
+++ b/conf/machine/ls1043ardb-32b.conf
@@ -25,7 +25,7 @@ KERNEL_DEFCONFIG ?= "${S}/arch/arm/configs/multi_v7_defconfig"
SERIAL_CONSOLES ?= "115200;ttyS0 115200;ttyAMA0"
SERIAL_CONSOLES_CHECK ?= "${SERIAL_CONSOLES}"
-EXTRA_IMAGEDEPENDS += "rcw fm-ucode qe-ucode"
+EXTRA_IMAGEDEPENDS += "fm-ucode rcw ppa qe-ucode"
USE_VT = "0"
require conf/multilib.conf
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 13/17] ls1046ardb-32b: update u-boot configs
2017-03-14 9:32 [PATCH 01/17] ls2080ardb: add MACHINEOVERRES fsl-lsch3/ls2080a Chunrong Guo
` (10 preceding siblings ...)
2017-03-14 9:32 ` [PATCH 12/17] ls1043ardb-32b: build ppa Chunrong Guo
@ 2017-03-14 9:32 ` Chunrong Guo
2017-03-14 9:32 ` [PATCH 14/17] ls1046ardb-32b: KERNEL_DEFCONFIG use multi_v7_defconfig Chunrong Guo
` (3 subsequent siblings)
15 siblings, 0 replies; 19+ messages in thread
From: Chunrong Guo @ 2017-03-14 9:32 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
conf/machine/ls1046ardb-32b.conf | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/conf/machine/ls1046ardb-32b.conf b/conf/machine/ls1046ardb-32b.conf
index 0ea132a..e262d1f 100644
--- a/conf/machine/ls1046ardb-32b.conf
+++ b/conf/machine/ls1046ardb-32b.conf
@@ -11,10 +11,11 @@ require conf/machine/include/arm/arch-arm64.inc
DEFAULTTUNE = "armv7ahf-neon"
-UBOOT_CONFIG ??= "emmc sdcard qspi"
-UBOOT_CONFIG[emmc] = "ls1046ardb_aarch32_emmc_defconfig,,u-boot-with-spl-pbl.bin"
-UBOOT_CONFIG[sdcard] = "ls1046ardb_aarch32_sdcard_defconfig,,u-boot-with-spl-pbl.bin"
-UBOOT_CONFIG[qspi] = "ls1046ardb_aarch32_qspi_config,,u-boot-dtb.bin"
+UBOOT_CONFIG ??= "emmc sdcard qspi-secure-boot qspi"
+UBOOT_CONFIG[emmc] = "ls1046ardb_emmc_defconfig,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[sdcard] = "ls1046ardb_sdcard_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[qspi] = "ls1046ardb_qspi_config,,u-boot-dtb.bin"
+UBOOT_CONFIG[qspi-secure-boot] = "ls1046ardb_qspi_SECURE_BOOT_config,,u-boot-dtb.bin"
KERNEL_DEVICETREE ?= "\
freescale/fsl-ls1046a-rdb.dtb \
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 14/17] ls1046ardb-32b: KERNEL_DEFCONFIG use multi_v7_defconfig
2017-03-14 9:32 [PATCH 01/17] ls2080ardb: add MACHINEOVERRES fsl-lsch3/ls2080a Chunrong Guo
` (11 preceding siblings ...)
2017-03-14 9:32 ` [PATCH 13/17] ls1046ardb-32b: update u-boot configs Chunrong Guo
@ 2017-03-14 9:32 ` Chunrong Guo
2017-03-14 9:32 ` [PATCH 15/17] ls1046ardb-32b: build ppa Chunrong Guo
` (2 subsequent siblings)
15 siblings, 0 replies; 19+ messages in thread
From: Chunrong Guo @ 2017-03-14 9:32 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
conf/machine/ls1046ardb-32b.conf | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/conf/machine/ls1046ardb-32b.conf b/conf/machine/ls1046ardb-32b.conf
index e262d1f..66cf278 100644
--- a/conf/machine/ls1046ardb-32b.conf
+++ b/conf/machine/ls1046ardb-32b.conf
@@ -21,7 +21,7 @@ KERNEL_DEVICETREE ?= "\
freescale/fsl-ls1046a-rdb.dtb \
freescale/fsl-ls1046a-rdb-usdpaa.dtb \
"
-KERNEL_DEFCONFIG ?= "${S}/arch/arm/configs/ls_aarch32_defconfig"
+KERNEL_DEFCONFIG ?= "${S}/arch/arm/configs/multi_v7_defconfig"
SERIAL_CONSOLES ?= "115200;ttyS0 115200;ttyAMA0 115200;ttyLP0"
SERIAL_CONSOLES_CHECK ?= "${SERIAL_CONSOLES}"
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 15/17] ls1046ardb-32b: build ppa
2017-03-14 9:32 [PATCH 01/17] ls2080ardb: add MACHINEOVERRES fsl-lsch3/ls2080a Chunrong Guo
` (12 preceding siblings ...)
2017-03-14 9:32 ` [PATCH 14/17] ls1046ardb-32b: KERNEL_DEFCONFIG use multi_v7_defconfig Chunrong Guo
@ 2017-03-14 9:32 ` Chunrong Guo
2017-03-14 9:32 ` [PATCH 16/17] udev-rules-qoriq: no rule to install for ls1012a/ls2080a Chunrong Guo
2017-03-14 9:32 ` [PATCH 17/17] udev-rules-qoriq: add rules for ls1046a Chunrong Guo
15 siblings, 0 replies; 19+ messages in thread
From: Chunrong Guo @ 2017-03-14 9:32 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
conf/machine/ls1046ardb-32b.conf | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/conf/machine/ls1046ardb-32b.conf b/conf/machine/ls1046ardb-32b.conf
index 66cf278..ff8e1bf 100644
--- a/conf/machine/ls1046ardb-32b.conf
+++ b/conf/machine/ls1046ardb-32b.conf
@@ -26,7 +26,7 @@ KERNEL_DEFCONFIG ?= "${S}/arch/arm/configs/multi_v7_defconfig"
SERIAL_CONSOLES ?= "115200;ttyS0 115200;ttyAMA0 115200;ttyLP0"
SERIAL_CONSOLES_CHECK ?= "${SERIAL_CONSOLES}"
-EXTRA_IMAGEDEPENDS += "fm-ucode rcw"
+EXTRA_IMAGEDEPENDS += "fm-ucode rcw ppa"
USE_VT = "0"
require conf/multilib.conf
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 16/17] udev-rules-qoriq: no rule to install for ls1012a/ls2080a
2017-03-14 9:32 [PATCH 01/17] ls2080ardb: add MACHINEOVERRES fsl-lsch3/ls2080a Chunrong Guo
` (13 preceding siblings ...)
2017-03-14 9:32 ` [PATCH 15/17] ls1046ardb-32b: build ppa Chunrong Guo
@ 2017-03-14 9:32 ` Chunrong Guo
2017-03-14 9:32 ` [PATCH 17/17] udev-rules-qoriq: add rules for ls1046a Chunrong Guo
15 siblings, 0 replies; 19+ messages in thread
From: Chunrong Guo @ 2017-03-14 9:32 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
recipes-core/udev/udev-rules-qoriq.bb | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/recipes-core/udev/udev-rules-qoriq.bb b/recipes-core/udev/udev-rules-qoriq.bb
index fb42d69..22ae4b3 100644
--- a/recipes-core/udev/udev-rules-qoriq.bb
+++ b/recipes-core/udev/udev-rules-qoriq.bb
@@ -15,7 +15,8 @@ RULE_e6500-64b = "72-fsl-dpaa-persistent-networking.rules"
RULE_t1024 = "72-fsl-dpaa-persistent-networking.rules"
RULE_t1023 = "72-fsl-dpaa-persistent-networking.rules"
RULE_ls1043a = "73-fsl-dpaa-persistent-networking.rules"
-RULE_ls2080ardb = ""
+RULE_ls1012a = ""
+RULE_ls2080a = ""
do_install () {
install -d ${D}${sysconfdir}/udev/rules.d/
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 17/17] udev-rules-qoriq: add rules for ls1046a
2017-03-14 9:32 [PATCH 01/17] ls2080ardb: add MACHINEOVERRES fsl-lsch3/ls2080a Chunrong Guo
` (14 preceding siblings ...)
2017-03-14 9:32 ` [PATCH 16/17] udev-rules-qoriq: no rule to install for ls1012a/ls2080a Chunrong Guo
@ 2017-03-14 9:32 ` Chunrong Guo
15 siblings, 0 replies; 19+ messages in thread
From: Chunrong Guo @ 2017-03-14 9:32 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
recipes-core/udev/udev-rules-qoriq.bb | 4 ++++
recipes-core/udev/udev-rules-qoriq/74-ls1046a-xfi2-networking.rules | 1 +
2 files changed, 5 insertions(+)
create mode 100644 recipes-core/udev/udev-rules-qoriq/74-ls1046a-xfi2-networking.rules
diff --git a/recipes-core/udev/udev-rules-qoriq.bb b/recipes-core/udev/udev-rules-qoriq.bb
index 22ae4b3..f4a9cd8 100644
--- a/recipes-core/udev/udev-rules-qoriq.bb
+++ b/recipes-core/udev/udev-rules-qoriq.bb
@@ -6,6 +6,7 @@ SRC_URI = "\
file://71-fsl-dpaa-persistent-networking.rules \
file://72-fsl-dpaa-persistent-networking.rules \
file://73-fsl-dpaa-persistent-networking.rules \
+ file://74-ls1046a-xfi2-networking.rules \
"
S = "${WORKDIR}"
@@ -15,6 +16,9 @@ RULE_e6500-64b = "72-fsl-dpaa-persistent-networking.rules"
RULE_t1024 = "72-fsl-dpaa-persistent-networking.rules"
RULE_t1023 = "72-fsl-dpaa-persistent-networking.rules"
RULE_ls1043a = "73-fsl-dpaa-persistent-networking.rules"
+RULE_ls1046a = "73-fsl-dpaa-persistent-networking.rules \
+ 74-ls1046a-xfi2-networking.rules \
+"
RULE_ls1012a = ""
RULE_ls2080a = ""
diff --git a/recipes-core/udev/udev-rules-qoriq/74-ls1046a-xfi2-networking.rules b/recipes-core/udev/udev-rules-qoriq/74-ls1046a-xfi2-networking.rules
new file mode 100644
index 0000000..42931d4
--- /dev/null
+++ b/recipes-core/udev/udev-rules-qoriq/74-ls1046a-xfi2-networking.rules
@@ -0,0 +1 @@
+SUBSYSTEM=="net", DRIVERS=="fsl_dpa*", ATTR{device_addr}=="1af2000", NAME="fm1-mac10"
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* Re: [PATCH 05/17] ls1012ardb: add machine file
2017-03-14 9:32 ` [PATCH 05/17] ls1012ardb: add machine file Chunrong Guo
@ 2017-03-21 14:34 ` Bob Cochran
2017-03-22 2:24 ` Ting Liu
0 siblings, 1 reply; 19+ messages in thread
From: Bob Cochran @ 2017-03-21 14:34 UTC (permalink / raw)
To: Chunrong Guo, meta-freescale
On 03/14/2017 05:32 AM, Chunrong Guo wrote:
> From: Ting Liu <ting.liu@nxp.com>
>
> Signed-off-by: Ting Liu <ting.liu@nxp.com>
> ---
> conf/machine/ls1012ardb.conf | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
> create mode 100644 conf/machine/ls1012ardb.conf
>
> diff --git a/conf/machine/ls1012ardb.conf b/conf/machine/ls1012ardb.conf
> new file mode 100644
> index 0000000..9298a86
> --- /dev/null
> +++ b/conf/machine/ls1012ardb.conf
> @@ -0,0 +1,21 @@
> +#@TYPE: Machine
> +#@NAME: NXP LS1012ARDB board
> +#@SOC: LSCH2
> +#@DESCRIPTION: Machine configuration for NXP QorIQ LS1012ARDB
> +# with ARM Cortext-A53 core
> +#@MAINTAINER: Zongchun Yu <Zongchun.Yu@nxp.com>
> +
> +MACHINEOVERRIDES =. "fsl-lsch2:ls1012a:"
> +
> +require conf/machine/include/qoriq-arm64.inc
> +require conf/machine/include/arm/arch-arm64.inc
> +
> +UBOOT_CONFIG ??= "qspi-secure-boot qspi"
> +UBOOT_CONFIG[qspi] = "ls1012ardb_qspi_defconfig,,u-boot-dtb.bin"
> +UBOOT_CONFIG[qspi-secure-boot] = "ls1012ardb_qspi_SECURE_BOOT_defconfig,,u-boot-dtb.bin"
> +
> +KERNEL_DEVICETREE ?= "freescale/fsl-ls1012a-rdb.dtb"
> +KERNEL_DEFCONFIG ?= "${S}/arch/arm64/configs/defconfig"
> +
> +EXTRA_IMAGEDEPENDS += "ppa ls2-rcw"
Looking at meta-freescale master & master-next this morning, nothing
provides ppa for the ls1012a machine conf files. Looks like you need
to at least update COMPATIBLE_MACHINE in recipes-bsp/ppa/ppa_git.bb (
didn't see a patch for this on the mail list ), but maybe more than
this is required?
If it's only this change required, let me know if you want me to submit
the patch:
--- a/recipes-bsp/ppa/ppa_git.bb
+++ b/recipes-bsp/ppa/ppa_git.bb
@@ -45,5 +45,5 @@ FILES_${PN}-image += "/boot"
CLEANBROKEN = "1"
PARALLEL_MAKE = ""
-COMPATIBLE_MACHINE = "(ls1043a|ls1046a)"
+COMPATIBLE_MACHINE = "(ls1043a|ls1046a|ls1012a)"
PACKAGE_ARCH = "${MACHINE_ARCH}"
> +USE_VT = "0"
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH 05/17] ls1012ardb: add machine file
2017-03-21 14:34 ` Bob Cochran
@ 2017-03-22 2:24 ` Ting Liu
0 siblings, 0 replies; 19+ messages in thread
From: Ting Liu @ 2017-03-22 2:24 UTC (permalink / raw)
To: Bob Cochran, Chunrong Guo, meta-freescale
> -----Original Message-----
> From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-
> bounces@yoctoproject.org] On Behalf Of Bob Cochran
> Sent: Tuesday, March 21, 2017 10:35 PM
> To: Chunrong Guo <B40290@freescale.com>; meta-
> freescale@yoctoproject.org
> Subject: Re: [meta-freescale] [PATCH 05/17] ls1012ardb: add machine file
>
> On 03/14/2017 05:32 AM, Chunrong Guo wrote:
> > From: Ting Liu <ting.liu@nxp.com>
> >
> > Signed-off-by: Ting Liu <ting.liu@nxp.com>
> > ---
> > conf/machine/ls1012ardb.conf | 21 +++++++++++++++++++++
> > 1 file changed, 21 insertions(+)
> > create mode 100644 conf/machine/ls1012ardb.conf
> >
> > diff --git a/conf/machine/ls1012ardb.conf
> > b/conf/machine/ls1012ardb.conf new file mode 100644 index
> > 0000000..9298a86
> > --- /dev/null
> > +++ b/conf/machine/ls1012ardb.conf
> > @@ -0,0 +1,21 @@
> > +#@TYPE: Machine
> > +#@NAME: NXP LS1012ARDB board
> > +#@SOC: LSCH2
> > +#@DESCRIPTION: Machine configuration for NXP QorIQ LS1012ARDB
> > +# with ARM Cortext-A53 core
> > +#@MAINTAINER: Zongchun Yu <Zongchun.Yu@nxp.com>
> > +
> > +MACHINEOVERRIDES =. "fsl-lsch2:ls1012a:"
> > +
> > +require conf/machine/include/qoriq-arm64.inc
> > +require conf/machine/include/arm/arch-arm64.inc
> > +
> > +UBOOT_CONFIG ??= "qspi-secure-boot qspi"
> > +UBOOT_CONFIG[qspi] = "ls1012ardb_qspi_defconfig,,u-boot-dtb.bin"
> > +UBOOT_CONFIG[qspi-secure-boot] =
> "ls1012ardb_qspi_SECURE_BOOT_defconfig,,u-boot-dtb.bin"
> > +
> > +KERNEL_DEVICETREE ?= "freescale/fsl-ls1012a-rdb.dtb"
> > +KERNEL_DEFCONFIG ?= "${S}/arch/arm64/configs/defconfig"
> > +
> > +EXTRA_IMAGEDEPENDS += "ppa ls2-rcw"
>
> Looking at meta-freescale master & master-next this morning, nothing
> provides ppa for the ls1012a machine conf files. Looks like you need
> to at least update COMPATIBLE_MACHINE in recipes-bsp/ppa/ppa_git.bb
> ( didn't see a patch for this on the mail list ), but maybe more than this is
> required?
>
> If it's only this change required, let me know if you want me to submit the
> patch:
[Liu Ting-B28495] ppa has code update to support ls1012a, we will send the patch out soon.
>
> --- a/recipes-bsp/ppa/ppa_git.bb
> +++ b/recipes-bsp/ppa/ppa_git.bb
> @@ -45,5 +45,5 @@ FILES_${PN}-image += "/boot"
>
> CLEANBROKEN = "1"
> PARALLEL_MAKE = ""
> -COMPATIBLE_MACHINE = "(ls1043a|ls1046a)"
> +COMPATIBLE_MACHINE = "(ls1043a|ls1046a|ls1012a)"
> PACKAGE_ARCH = "${MACHINE_ARCH}"
>
>
>
> > +USE_VT = "0"
>
>
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
^ permalink raw reply [flat|nested] 19+ messages in thread
end of thread, other threads:[~2017-03-22 15:00 UTC | newest]
Thread overview: 19+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-03-14 9:32 [PATCH 01/17] ls2080ardb: add MACHINEOVERRES fsl-lsch3/ls2080a Chunrong Guo
2017-03-14 9:32 ` [PATCH 02/17] ls1021atwr: switch to new UBOOT_CONFIG format Chunrong Guo
2017-03-14 9:32 ` [PATCH 03/17] init-ifupdown: use consistent interfaces for qoriq Chunrong Guo
2017-03-14 9:32 ` [PATCH 04/17] openssl: use linux-aarch64 target for aarch64 Chunrong Guo
2017-03-14 9:32 ` [PATCH 05/17] ls1012ardb: add machine file Chunrong Guo
2017-03-21 14:34 ` Bob Cochran
2017-03-22 2:24 ` Ting Liu
2017-03-14 9:32 ` [PATCH 06/17] ls1012ardb-32b: " Chunrong Guo
2017-03-14 9:32 ` [PATCH 07/17] ls1012afrdm: " Chunrong Guo
2017-03-14 9:32 ` [PATCH 08/17] ls1012afrdm-32b: " Chunrong Guo
2017-03-14 9:32 ` [PATCH 09/17] ls1046ardb: build emmc u-boot Chunrong Guo
2017-03-14 9:32 ` [PATCH 10/17] ls1043ardb-32b: update u-boot configs Chunrong Guo
2017-03-14 9:32 ` [PATCH 11/17] ls1043ardb-32b: KERNEL_DEFCONFIG use multi_v7_defconfig Chunrong Guo
2017-03-14 9:32 ` [PATCH 12/17] ls1043ardb-32b: build ppa Chunrong Guo
2017-03-14 9:32 ` [PATCH 13/17] ls1046ardb-32b: update u-boot configs Chunrong Guo
2017-03-14 9:32 ` [PATCH 14/17] ls1046ardb-32b: KERNEL_DEFCONFIG use multi_v7_defconfig Chunrong Guo
2017-03-14 9:32 ` [PATCH 15/17] ls1046ardb-32b: build ppa Chunrong Guo
2017-03-14 9:32 ` [PATCH 16/17] udev-rules-qoriq: no rule to install for ls1012a/ls2080a Chunrong Guo
2017-03-14 9:32 ` [PATCH 17/17] udev-rules-qoriq: add rules for ls1046a Chunrong Guo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.