* [PATCH v2 1/7] mfd: syscon: atmel-smc: Add new helpers to ease SMC regs manipulation
2017-03-16 8:30 [PATCH 0/7] memory: atmel-ebi: Add PM ops Boris Brezillon
@ 2017-03-16 8:30 ` Boris Brezillon
2017-03-16 10:15 ` Lee Jones
2017-03-16 8:30 ` [PATCH v2 2/7] memory: atmel-ebi: Simplify SMC config code Boris Brezillon
` (7 subsequent siblings)
8 siblings, 1 reply; 17+ messages in thread
From: Boris Brezillon @ 2017-03-16 8:30 UTC (permalink / raw)
To: linux-arm-kernel
These new helpers + macro definitions are meant to replace the old ones
which are unpractical to use.
Note that the macros and function prefixes have been intentionally
changed to ATMEL_[H]SMC_XX and atmel_[h]smc_ to reflect the fact that
this IP is also embedded in avr32 SoCs (and not only in at91 ones).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mfd/Kconfig | 4 +
drivers/mfd/Makefile | 1 +
drivers/mfd/atmel-smc.c | 314 +++++++++++++++++++++++++++++++++++
include/linux/mfd/syscon/atmel-smc.h | 87 ++++++++++
4 files changed, 406 insertions(+)
create mode 100644 drivers/mfd/atmel-smc.c
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 55ecdfb74d31..2e2eac7db9f3 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -121,6 +121,10 @@ config MFD_ATMEL_HLCDC
additional drivers must be enabled in order to use the
functionality of the device.
+config MFD_ATMEL_SMC
+ bool
+ select MFD_SYSCON
+
config MFD_BCM590XX
tristate "Broadcom BCM590xx PMUs"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 31ce07611a6f..edd821bc8e80 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -181,6 +181,7 @@ obj-$(CONFIG_MFD_TPS65090) += tps65090.o
obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
obj-$(CONFIG_MFD_ATMEL_FLEXCOM) += atmel-flexcom.o
obj-$(CONFIG_MFD_ATMEL_HLCDC) += atmel-hlcdc.o
+obj-$(CONFIG_MFD_ATMEL_SMC) += atmel-smc.o
obj-$(CONFIG_MFD_INTEL_LPSS) += intel-lpss.o
obj-$(CONFIG_MFD_INTEL_LPSS_PCI) += intel-lpss-pci.o
obj-$(CONFIG_MFD_INTEL_LPSS_ACPI) += intel-lpss-acpi.o
diff --git a/drivers/mfd/atmel-smc.c b/drivers/mfd/atmel-smc.c
new file mode 100644
index 000000000000..954cf0f66a31
--- /dev/null
+++ b/drivers/mfd/atmel-smc.c
@@ -0,0 +1,314 @@
+/*
+ * Atmel SMC (Static Memory Controller) helper functions.
+ *
+ * Copyright (C) 2017 Atmel
+ * Copyright (C) 2017 Free Electrons
+ *
+ * Author: Boris Brezillon <boris.brezillon@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mfd/syscon/atmel-smc.h>
+
+/**
+ * atmel_smc_cs_conf_init - initialize a SMC CS conf
+ * @conf: the SMC CS conf to initialize
+ *
+ * Set all fields to 0 so that one can start defining a new config.
+ */
+void atmel_smc_cs_conf_init(struct atmel_smc_cs_conf *conf)
+{
+ memset(conf, 0, sizeof(*conf));
+}
+EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_init);
+
+/**
+ * atmel_smc_cs_encode_ncycles - encode a number of MCK clk cycles in the
+ * format expected by the SMC engine
+ * @ncycles: number of MCK clk cycles
+ * @msbpos: position of the MSB part of the timing field
+ * @msbwidth: width of the MSB part of the timing field
+ * @msbfactor: factor applied to the MSB
+ * @encodedval: param used to store the encoding result
+ *
+ * This function encodes the @ncycles value as described in the datasheet
+ * (section "SMC Setup/Pulse/Cycle/Timings Register"). This is a generic
+ * helper which called with different parameter depending on the encoding
+ * scheme.
+ *
+ * If the @ncycles value is too big to be encoded, -ERANGE is returned and
+ * the encodedval is contains the maximum val. Otherwise, 0 is returned.
+ */
+static int atmel_smc_cs_encode_ncycles(unsigned int ncycles,
+ unsigned int msbpos,
+ unsigned int msbwidth,
+ unsigned int msbfactor,
+ unsigned int *encodedval)
+{
+ unsigned int lsbmask = GENMASK(msbpos - 1, 0);
+ unsigned int msbmask = GENMASK(msbwidth - 1, 0);
+ unsigned int msb, lsb;
+ int ret = 0;
+
+ msb = ncycles / msbfactor;
+ lsb = ncycles % msbfactor;
+
+ if (lsb > lsbmask) {
+ lsb = 0;
+ msb++;
+ }
+
+ /*
+ * Let's just put the maximum we can if the requested setting does
+ * not fit in the register field.
+ * We still return -ERANGE in case the caller cares.
+ */
+ if (msb > msbmask) {
+ msb = msbmask;
+ lsb = lsbmask;
+ ret = -ERANGE;
+ }
+
+ *encodedval = (msb << msbpos) | lsb;
+
+ return ret;
+}
+
+/**
+ * atmel_smc_cs_conf_set_timing - set the SMC CS conf Txx parameter to a
+ * specific value
+ * @conf: SMC CS conf descriptor
+ * @shift: the position of the Txx field in the TIMINGS register
+ * @ncycles: value (expressed in MCK clk cycles) to assign to this Txx
+ * parameter
+ *
+ * This function encodes the @ncycles value as described in the datasheet
+ * (section "SMC Timings Register"), and then stores the result in the
+ * @conf->timings field at @shift position.
+ *
+ * Returns -EINVAL if shift is invalid, -ERANGE if ncycles does not fit in
+ * the field, and 0 otherwise.
+ */
+int atmel_smc_cs_conf_set_timing(struct atmel_smc_cs_conf *conf,
+ unsigned int shift, unsigned int ncycles)
+{
+ unsigned int val;
+ int ret;
+
+ if (shift != ATMEL_HSMC_TIMINGS_TCLR_SHIFT &&
+ shift != ATMEL_HSMC_TIMINGS_TADL_SHIFT &&
+ shift != ATMEL_HSMC_TIMINGS_TAR_SHIFT &&
+ shift != ATMEL_HSMC_TIMINGS_TRR_SHIFT &&
+ shift != ATMEL_HSMC_TIMINGS_TWB_SHIFT)
+ return -EINVAL;
+
+ /*
+ * The formula described in atmel datasheets (section "HSMC Timings
+ * Register"):
+ *
+ * ncycles = (Txx[3] * 64) + Txx[2:0]
+ */
+ ret = atmel_smc_cs_encode_ncycles(ncycles, 3, 1, 64, &val);
+ conf->timings &= ~GENMASK(shift + 3, shift);
+ conf->timings |= val << shift;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_timing);
+
+/**
+ * atmel_smc_cs_conf_set_setup - set the SMC CS conf xx_SETUP parameter to a
+ * specific value
+ * @conf: SMC CS conf descriptor
+ * @shift: the position of the xx_SETUP field in the SETUP register
+ * @ncycles: value (expressed in MCK clk cycles) to assign to this xx_SETUP
+ * parameter
+ *
+ * This function encodes the @ncycles value as described in the datasheet
+ * (section "SMC Setup Register"), and then stores the result in the
+ * @conf->setup field at @shift position.
+ *
+ * Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in
+ * the field, and 0 otherwise.
+ */
+int atmel_smc_cs_conf_set_setup(struct atmel_smc_cs_conf *conf,
+ unsigned int shift, unsigned int ncycles)
+{
+ unsigned int val;
+ int ret;
+
+ if (shift != ATMEL_SMC_NWE_SHIFT && shift != ATMEL_SMC_NCS_WR_SHIFT &&
+ shift != ATMEL_SMC_NRD_SHIFT && shift != ATMEL_SMC_NCS_RD_SHIFT)
+ return -EINVAL;
+
+ /*
+ * The formula described in atmel datasheets (section "SMC Setup
+ * Register"):
+ *
+ * ncycles = (128 * xx_SETUP[5]) + xx_SETUP[4:0]
+ */
+ ret = atmel_smc_cs_encode_ncycles(ncycles, 5, 1, 128, &val);
+ conf->setup &= ~GENMASK(shift + 7, shift);
+ conf->setup |= val << shift;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_setup);
+
+/**
+ * atmel_smc_cs_conf_set_pulse - set the SMC CS conf xx_PULSE parameter to a
+ * specific value
+ * @conf: SMC CS conf descriptor
+ * @shift: the position of the xx_PULSE field in the PULSE register
+ * @ncycles: value (expressed in MCK clk cycles) to assign to this xx_PULSE
+ * parameter
+ *
+ * This function encodes the @ncycles value as described in the datasheet
+ * (section "SMC Pulse Register"), and then stores the result in the
+ * @conf->setup field at @shift position.
+ *
+ * Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in
+ * the field, and 0 otherwise.
+ */
+int atmel_smc_cs_conf_set_pulse(struct atmel_smc_cs_conf *conf,
+ unsigned int shift, unsigned int ncycles)
+{
+ unsigned int val;
+ int ret;
+
+ if (shift != ATMEL_SMC_NWE_SHIFT && shift != ATMEL_SMC_NCS_WR_SHIFT &&
+ shift != ATMEL_SMC_NRD_SHIFT && shift != ATMEL_SMC_NCS_RD_SHIFT)
+ return -EINVAL;
+
+ /*
+ * The formula described in atmel datasheets (section "SMC Pulse
+ * Register"):
+ *
+ * ncycles = (256 * xx_PULSE[6]) + xx_PULSE[5:0]
+ */
+ ret = atmel_smc_cs_encode_ncycles(ncycles, 6, 1, 256, &val);
+ conf->pulse &= ~GENMASK(shift + 7, shift);
+ conf->pulse |= val << shift;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_pulse);
+
+/**
+ * atmel_smc_cs_conf_set_cycle - set the SMC CS conf xx_CYCLE parameter to a
+ * specific value
+ * @conf: SMC CS conf descriptor
+ * @shift: the position of the xx_CYCLE field in the CYCLE register
+ * @ncycles: value (expressed in MCK clk cycles) to assign to this xx_CYCLE
+ * parameter
+ *
+ * This function encodes the @ncycles value as described in the datasheet
+ * (section "SMC Pulse Register"), and then stores the result in the
+ * @conf->setup field at @shift position.
+ *
+ * Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in
+ * the field, and 0 otherwise.
+ */
+int atmel_smc_cs_conf_set_cycle(struct atmel_smc_cs_conf *conf,
+ unsigned int shift, unsigned int ncycles)
+{
+ unsigned int val;
+ int ret;
+
+ if (shift != ATMEL_SMC_NWE_SHIFT && shift != ATMEL_SMC_NRD_SHIFT)
+ return -EINVAL;
+
+ /*
+ * The formula described in atmel datasheets (section "SMC Cycle
+ * Register"):
+ *
+ * ncycles = (xx_CYCLE[8:7] * 256) + xx_CYCLE[6:0]
+ */
+ ret = atmel_smc_cs_encode_ncycles(ncycles, 7, 2, 256, &val);
+ conf->cycle &= ~GENMASK(shift + 15, shift);
+ conf->cycle |= val << shift;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_cycle);
+
+/**
+ * atmel_smc_cs_conf_apply - apply an SMC CS conf
+ * @regmap: the SMC regmap
+ * @cs: the CS id
+ * @conf the SMC CS conf to apply
+ *
+ * Applies an SMC CS configuration.
+ * Only valid on at91sam9/avr32 SoCs.
+ */
+void atmel_smc_cs_conf_apply(struct regmap *regmap, int cs,
+ const struct atmel_smc_cs_conf *conf)
+{
+ regmap_write(regmap, ATMEL_SMC_SETUP(cs), conf->setup);
+ regmap_write(regmap, ATMEL_SMC_PULSE(cs), conf->pulse);
+ regmap_write(regmap, ATMEL_SMC_CYCLE(cs), conf->cycle);
+ regmap_write(regmap, ATMEL_SMC_MODE(cs), conf->mode);
+}
+EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_apply);
+
+/**
+ * atmel_hsmc_cs_conf_apply - apply an SMC CS conf
+ * @regmap: the HSMC regmap
+ * @cs: the CS id
+ * @conf the SMC CS conf to apply
+ *
+ * Applies an SMC CS configuration.
+ * Only valid on post-sama5 SoCs.
+ */
+void atmel_hsmc_cs_conf_apply(struct regmap *regmap, int cs,
+ const struct atmel_smc_cs_conf *conf)
+{
+ regmap_write(regmap, ATMEL_HSMC_SETUP(cs), conf->setup);
+ regmap_write(regmap, ATMEL_HSMC_PULSE(cs), conf->pulse);
+ regmap_write(regmap, ATMEL_HSMC_CYCLE(cs), conf->cycle);
+ regmap_write(regmap, ATMEL_HSMC_TIMINGS(cs), conf->timings);
+ regmap_write(regmap, ATMEL_HSMC_MODE(cs), conf->mode);
+}
+EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_apply);
+
+/**
+ * atmel_smc_cs_conf_get - retrieve the current SMC CS conf
+ * @regmap: the SMC regmap
+ * @cs: the CS id
+ * @conf: the SMC CS conf object to store the current conf
+ *
+ * Retrieve the SMC CS configuration.
+ * Only valid on at91sam9/avr32 SoCs.
+ */
+void atmel_smc_cs_conf_get(struct regmap *regmap, int cs,
+ struct atmel_smc_cs_conf *conf)
+{
+ regmap_read(regmap, ATMEL_SMC_SETUP(cs), &conf->setup);
+ regmap_read(regmap, ATMEL_SMC_PULSE(cs), &conf->pulse);
+ regmap_read(regmap, ATMEL_SMC_CYCLE(cs), &conf->cycle);
+ regmap_read(regmap, ATMEL_SMC_MODE(cs), &conf->mode);
+}
+EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_get);
+
+/**
+ * atmel_hsmc_cs_conf_get - retrieve the current SMC CS conf
+ * @regmap: the HSMC regmap
+ * @cs: the CS id
+ * @conf: the SMC CS conf object to store the current conf
+ *
+ * Retrieve the SMC CS configuration.
+ * Only valid on post-sama5 SoCs.
+ */
+void atmel_hsmc_cs_conf_get(struct regmap *regmap, int cs,
+ struct atmel_smc_cs_conf *conf)
+{
+ regmap_read(regmap, ATMEL_HSMC_SETUP(cs), &conf->setup);
+ regmap_read(regmap, ATMEL_HSMC_PULSE(cs), &conf->pulse);
+ regmap_read(regmap, ATMEL_HSMC_CYCLE(cs), &conf->cycle);
+ regmap_read(regmap, ATMEL_HSMC_TIMINGS(cs), &conf->timings);
+ regmap_read(regmap, ATMEL_HSMC_MODE(cs), &conf->mode);
+}
+EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_get);
diff --git a/include/linux/mfd/syscon/atmel-smc.h b/include/linux/mfd/syscon/atmel-smc.h
index be6ebe64eebe..00e6e3c8ee6f 100644
--- a/include/linux/mfd/syscon/atmel-smc.h
+++ b/include/linux/mfd/syscon/atmel-smc.h
@@ -69,6 +69,93 @@
#define AT91_SMC_PS_16 (2 << 28)
#define AT91_SMC_PS_32 (3 << 28)
+#define ATMEL_SMC_SETUP(cs) (((cs) * 0x10))
+#define ATMEL_HSMC_SETUP(cs) (0x600 + ((cs) * 0x14))
+#define ATMEL_SMC_PULSE(cs) (((cs) * 0x10) + 0x4)
+#define ATMEL_HSMC_PULSE(cs) (0x600 + ((cs) * 0x14) + 0x4)
+#define ATMEL_SMC_CYCLE(cs) (((cs) * 0x10) + 0x8)
+#define ATMEL_HSMC_CYCLE(cs) (0x600 + ((cs) * 0x14) + 0x8)
+#define ATMEL_SMC_NWE_SHIFT 0
+#define ATMEL_SMC_NCS_WR_SHIFT 8
+#define ATMEL_SMC_NRD_SHIFT 16
+#define ATMEL_SMC_NCS_RD_SHIFT 24
+
+#define ATMEL_SMC_MODE(cs) (((cs) * 0x10) + 0xc)
+#define ATMEL_HSMC_MODE(cs) (0x600 + ((cs) * 0x14) + 0x10)
+#define ATMEL_SMC_MODE_READMODE_MASK BIT(0)
+#define ATMEL_SMC_MODE_READMODE_NCS (0 << 0)
+#define ATMEL_SMC_MODE_READMODE_NRD (1 << 0)
+#define ATMEL_SMC_MODE_WRITEMODE_MASK BIT(1)
+#define ATMEL_SMC_MODE_WRITEMODE_NCS (0 << 1)
+#define ATMEL_SMC_MODE_WRITEMODE_NWE (1 << 1)
+#define ATMEL_SMC_MODE_EXNWMODE_MASK GENMASK(5, 4)
+#define ATMEL_SMC_MODE_EXNWMODE_DISABLE (0 << 4)
+#define ATMEL_SMC_MODE_EXNWMODE_FROZEN (2 << 4)
+#define ATMEL_SMC_MODE_EXNWMODE_READY (3 << 4)
+#define ATMEL_SMC_MODE_BAT_MASK BIT(8)
+#define ATMEL_SMC_MODE_BAT_SELECT (0 << 8)
+#define ATMEL_SMC_MODE_BAT_WRITE (1 << 8)
+#define ATMEL_SMC_MODE_DBW_MASK GENMASK(13, 12)
+#define ATMEL_SMC_MODE_DBW_8 (0 << 12)
+#define ATMEL_SMC_MODE_DBW_16 (1 << 12)
+#define ATMEL_SMC_MODE_DBW_32 (2 << 12)
+#define ATMEL_SMC_MODE_TDF_MASK GENMASK(19, 16)
+#define ATMEL_SMC_MODE_TDF(x) (((x) - 1) << 16)
+#define ATMEL_SMC_MODE_TDF_MAX 16
+#define ATMEL_SMC_MODE_TDF_MIN 1
+#define ATMEL_SMC_MODE_TDFMODE_OPTIMIZED BIT(20)
+#define ATMEL_SMC_MODE_PMEN BIT(24)
+#define ATMEL_SMC_MODE_PS_MASK GENMASK(29, 28)
+#define ATMEL_SMC_MODE_PS_4 (0 << 28)
+#define ATMEL_SMC_MODE_PS_8 (1 << 28)
+#define ATMEL_SMC_MODE_PS_16 (2 << 28)
+#define ATMEL_SMC_MODE_PS_32 (3 << 28)
+
+#define ATMEL_HSMC_TIMINGS(cs) (0x600 + ((cs) * 0x14) + 0xc)
+#define ATMEL_HSMC_TIMINGS_OCMS BIT(12)
+#define ATMEL_HSMC_TIMINGS_RBNSEL(x) ((x) << 28)
+#define ATMEL_HSMC_TIMINGS_NFSEL BIT(31)
+#define ATMEL_HSMC_TIMINGS_TCLR_SHIFT 0
+#define ATMEL_HSMC_TIMINGS_TADL_SHIFT 4
+#define ATMEL_HSMC_TIMINGS_TAR_SHIFT 8
+#define ATMEL_HSMC_TIMINGS_TRR_SHIFT 16
+#define ATMEL_HSMC_TIMINGS_TWB_SHIFT 24
+
+/**
+ * struct atmel_smc_cs_conf - SMC CS config as described in the datasheet.
+ * @setup: NCS/NWE/NRD setup timings (not applicable to at91rm9200)
+ * @pulse: NCS/NWE/NRD pulse timings (not applicable to at91rm9200)
+ * @cycle: NWE/NRD cycle timings (not applicable to at91rm9200)
+ * @timings: advanced NAND related timings (only applicable to HSMC)
+ * @mode: all kind of config parameters (see the fields definition above).
+ * The mode fields are different on at91rm9200
+ */
+struct atmel_smc_cs_conf {
+ u32 setup;
+ u32 pulse;
+ u32 cycle;
+ u32 timings;
+ u32 mode;
+};
+
+void atmel_smc_cs_conf_init(struct atmel_smc_cs_conf *conf);
+int atmel_smc_cs_conf_set_timing(struct atmel_smc_cs_conf *conf,
+ unsigned int shift,
+ unsigned int ncycles);
+int atmel_smc_cs_conf_set_setup(struct atmel_smc_cs_conf *conf,
+ unsigned int shift, unsigned int ncycles);
+int atmel_smc_cs_conf_set_pulse(struct atmel_smc_cs_conf *conf,
+ unsigned int shift, unsigned int ncycles);
+int atmel_smc_cs_conf_set_cycle(struct atmel_smc_cs_conf *conf,
+ unsigned int shift, unsigned int ncycles);
+void atmel_smc_cs_conf_apply(struct regmap *regmap, int cs,
+ const struct atmel_smc_cs_conf *conf);
+void atmel_hsmc_cs_conf_apply(struct regmap *regmap, int cs,
+ const struct atmel_smc_cs_conf *conf);
+void atmel_smc_cs_conf_get(struct regmap *regmap, int cs,
+ struct atmel_smc_cs_conf *conf);
+void atmel_hsmc_cs_conf_get(struct regmap *regmap, int cs,
+ struct atmel_smc_cs_conf *conf);
/*
* This function converts a setup timing expressed in nanoseconds into an
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v2 1/7] mfd: syscon: atmel-smc: Add new helpers to ease SMC regs manipulation
2017-03-16 8:30 ` [PATCH v2 1/7] mfd: syscon: atmel-smc: Add new helpers to ease SMC regs manipulation Boris Brezillon
@ 2017-03-16 10:15 ` Lee Jones
0 siblings, 0 replies; 17+ messages in thread
From: Lee Jones @ 2017-03-16 10:15 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, 16 Mar 2017, Boris Brezillon wrote:
> These new helpers + macro definitions are meant to replace the old ones
> which are unpractical to use.
>
> Note that the macros and function prefixes have been intentionally
> changed to ATMEL_[H]SMC_XX and atmel_[h]smc_ to reflect the fact that
> this IP is also embedded in avr32 SoCs (and not only in at91 ones).
>
> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> ---
> drivers/mfd/Kconfig | 4 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/atmel-smc.c | 314 +++++++++++++++++++++++++++++++++++
> include/linux/mfd/syscon/atmel-smc.h | 87 ++++++++++
> 4 files changed, 406 insertions(+)
> create mode 100644 drivers/mfd/atmel-smc.c
For my own reference:
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v2 2/7] memory: atmel-ebi: Simplify SMC config code
2017-03-16 8:30 [PATCH 0/7] memory: atmel-ebi: Add PM ops Boris Brezillon
2017-03-16 8:30 ` [PATCH v2 1/7] mfd: syscon: atmel-smc: Add new helpers to ease SMC regs manipulation Boris Brezillon
@ 2017-03-16 8:30 ` Boris Brezillon
2017-03-16 8:30 ` [PATCH v2 3/7] memory: atmel-ebi: Stop using reg_field objects for simple things Boris Brezillon
` (6 subsequent siblings)
8 siblings, 0 replies; 17+ messages in thread
From: Boris Brezillon @ 2017-03-16 8:30 UTC (permalink / raw)
To: linux-arm-kernel
New helpers/macros have been to atmel-smc.h introduced to simplify SMC
regs manipulation. Rework the code to use those helpers, and simplify
the ->xlate_config(), ->get_config() and ->apply_config() implementations.
SMC configs are now stored in a struct atmel_smc_cs_conf object that
directly contains registers values, which should help implementing
->suspend()/->resume() hooks.
We can also get rid of those regmap fields (and the associated ->init()
hook) which are not longer needed thanks to the
atmel_[h]smc_cs_conf_{apply,get}() helpers.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/memory/Kconfig | 1 +
drivers/memory/atmel-ebi.c | 430 +++++++++++++--------------------------------
2 files changed, 128 insertions(+), 303 deletions(-)
diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
index ec80e35c8dfe..3ecc429297a0 100644
--- a/drivers/memory/Kconfig
+++ b/drivers/memory/Kconfig
@@ -30,6 +30,7 @@ config ATMEL_EBI
default y
depends on ARCH_AT91 && OF
select MFD_SYSCON
+ select MFD_ATMEL_SMC
help
Driver for Atmel EBI controller.
Used to configure the EBI (external bus interface) when the device-
diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c
index 4e83a8b92665..e1b8590e7d23 100644
--- a/drivers/memory/atmel-ebi.c
+++ b/drivers/memory/atmel-ebi.c
@@ -18,37 +18,9 @@
#include <linux/of_device.h>
#include <linux/regmap.h>
-struct at91sam9_smc_timings {
- u32 ncs_rd_setup_ns;
- u32 nrd_setup_ns;
- u32 ncs_wr_setup_ns;
- u32 nwe_setup_ns;
- u32 ncs_rd_pulse_ns;
- u32 nrd_pulse_ns;
- u32 ncs_wr_pulse_ns;
- u32 nwe_pulse_ns;
- u32 nrd_cycle_ns;
- u32 nwe_cycle_ns;
- u32 tdf_ns;
-};
-
-struct at91sam9_smc_generic_fields {
- struct regmap_field *setup;
- struct regmap_field *pulse;
- struct regmap_field *cycle;
- struct regmap_field *mode;
-};
-
-struct at91sam9_ebi_dev_config {
- struct at91sam9_smc_timings timings;
- u32 mode;
-};
-
struct at91_ebi_dev_config {
int cs;
- union {
- struct at91sam9_ebi_dev_config sam9;
- };
+ struct atmel_smc_cs_conf smcconf;
};
struct at91_ebi;
@@ -69,9 +41,8 @@ struct at91_ebi_caps {
int (*xlate_config)(struct at91_ebi_dev *ebid,
struct device_node *configs_np,
struct at91_ebi_dev_config *conf);
- int (*apply_config)(struct at91_ebi_dev *ebid,
- struct at91_ebi_dev_config *conf);
- int (*init)(struct at91_ebi *ebi);
+ void (*apply_config)(struct at91_ebi_dev *ebid,
+ struct at91_ebi_dev_config *conf);
};
struct at91_ebi {
@@ -86,151 +57,119 @@ struct at91_ebi {
struct device *dev;
const struct at91_ebi_caps *caps;
struct list_head devs;
- union {
- struct at91sam9_smc_generic_fields sam9;
- };
};
+struct atmel_smc_timing_xlate {
+ const char *name;
+ int (*converter)(struct atmel_smc_cs_conf *conf,
+ unsigned int shift, unsigned int nycles);
+ unsigned int shift;
+};
+
+#define ATMEL_SMC_SETUP_XLATE(nm, pos) \
+ { .name = nm, .converter = atmel_smc_cs_conf_set_setup, .shift = pos}
+
+#define ATMEL_SMC_PULSE_XLATE(nm, pos) \
+ { .name = nm, .converter = atmel_smc_cs_conf_set_pulse, .shift = pos}
+
+#define ATMEL_SMC_CYCLE_XLATE(nm, pos) \
+ { .name = nm, .converter = atmel_smc_cs_conf_set_setup, .shift = pos}
+
static void at91sam9_ebi_get_config(struct at91_ebi_dev *ebid,
struct at91_ebi_dev_config *conf)
{
- struct at91sam9_smc_generic_fields *fields = &ebid->ebi->sam9;
- unsigned int clk_period = NSEC_PER_SEC / clk_get_rate(ebid->ebi->clk);
- struct at91sam9_ebi_dev_config *config = &conf->sam9;
- struct at91sam9_smc_timings *timings = &config->timings;
- unsigned int val;
-
- regmap_fields_read(fields->mode, conf->cs, &val);
- config->mode = val & ~AT91_SMC_TDF;
-
- val = (val & AT91_SMC_TDF) >> 16;
- timings->tdf_ns = clk_period * val;
-
- regmap_fields_read(fields->setup, conf->cs, &val);
- timings->ncs_rd_setup_ns = (val >> 24) & 0x1f;
- timings->ncs_rd_setup_ns += ((val >> 29) & 0x1) * 128;
- timings->ncs_rd_setup_ns *= clk_period;
- timings->nrd_setup_ns = (val >> 16) & 0x1f;
- timings->nrd_setup_ns += ((val >> 21) & 0x1) * 128;
- timings->nrd_setup_ns *= clk_period;
- timings->ncs_wr_setup_ns = (val >> 8) & 0x1f;
- timings->ncs_wr_setup_ns += ((val >> 13) & 0x1) * 128;
- timings->ncs_wr_setup_ns *= clk_period;
- timings->nwe_setup_ns = val & 0x1f;
- timings->nwe_setup_ns += ((val >> 5) & 0x1) * 128;
- timings->nwe_setup_ns *= clk_period;
-
- regmap_fields_read(fields->pulse, conf->cs, &val);
- timings->ncs_rd_pulse_ns = (val >> 24) & 0x3f;
- timings->ncs_rd_pulse_ns += ((val >> 30) & 0x1) * 256;
- timings->ncs_rd_pulse_ns *= clk_period;
- timings->nrd_pulse_ns = (val >> 16) & 0x3f;
- timings->nrd_pulse_ns += ((val >> 22) & 0x1) * 256;
- timings->nrd_pulse_ns *= clk_period;
- timings->ncs_wr_pulse_ns = (val >> 8) & 0x3f;
- timings->ncs_wr_pulse_ns += ((val >> 14) & 0x1) * 256;
- timings->ncs_wr_pulse_ns *= clk_period;
- timings->nwe_pulse_ns = val & 0x3f;
- timings->nwe_pulse_ns += ((val >> 6) & 0x1) * 256;
- timings->nwe_pulse_ns *= clk_period;
-
- regmap_fields_read(fields->cycle, conf->cs, &val);
- timings->nrd_cycle_ns = (val >> 16) & 0x7f;
- timings->nrd_cycle_ns += ((val >> 23) & 0x3) * 256;
- timings->nrd_cycle_ns *= clk_period;
- timings->nwe_cycle_ns = val & 0x7f;
- timings->nwe_cycle_ns += ((val >> 7) & 0x3) * 256;
- timings->nwe_cycle_ns *= clk_period;
+ atmel_smc_cs_conf_get(ebid->ebi->smc.regmap, conf->cs,
+ &conf->smcconf);
}
-static int at91_xlate_timing(struct device_node *np, const char *prop,
- u32 *val, bool *required)
+static void sama5_ebi_get_config(struct at91_ebi_dev *ebid,
+ struct at91_ebi_dev_config *conf)
{
- if (!of_property_read_u32(np, prop, val)) {
- *required = true;
- return 0;
- }
-
- if (*required)
- return -EINVAL;
-
- return 0;
+ atmel_hsmc_cs_conf_get(ebid->ebi->smc.regmap, conf->cs,
+ &conf->smcconf);
}
-static int at91sam9_smc_xslate_timings(struct at91_ebi_dev *ebid,
+static const struct atmel_smc_timing_xlate timings_xlate_table[] = {
+ ATMEL_SMC_SETUP_XLATE("atmel,smc-ncs-rd-setup-ns",
+ ATMEL_SMC_NCS_RD_SHIFT),
+ ATMEL_SMC_SETUP_XLATE("atmel,smc-ncs-wr-setup-ns",
+ ATMEL_SMC_NCS_WR_SHIFT),
+ ATMEL_SMC_SETUP_XLATE("atmel,smc-nrd-setup-ns", ATMEL_SMC_NRD_SHIFT),
+ ATMEL_SMC_SETUP_XLATE("atmel,smc-nwe-setup-ns", ATMEL_SMC_NWE_SHIFT),
+ ATMEL_SMC_PULSE_XLATE("atmel,smc-ncs-rd-pulse-ns",
+ ATMEL_SMC_NCS_RD_SHIFT),
+ ATMEL_SMC_PULSE_XLATE("atmel,smc-ncs-wr-pulse-ns",
+ ATMEL_SMC_NCS_WR_SHIFT),
+ ATMEL_SMC_PULSE_XLATE("atmel,smc-nrd-pulse-ns", ATMEL_SMC_NRD_SHIFT),
+ ATMEL_SMC_PULSE_XLATE("atmel,smc-nwe-pulse-ns", ATMEL_SMC_NWE_SHIFT),
+ ATMEL_SMC_CYCLE_XLATE("atmel,smc-nrd-cycle-ns", ATMEL_SMC_NRD_SHIFT),
+ ATMEL_SMC_CYCLE_XLATE("atmel,smc-nwe-cycle-ns", ATMEL_SMC_NWE_SHIFT),
+};
+
+static int at91_ebi_xslate_smc_timings(struct at91_ebi_dev *ebid,
struct device_node *np,
- struct at91sam9_smc_timings *timings,
- bool *required)
+ struct atmel_smc_cs_conf *smcconf)
{
- int ret;
-
- ret = at91_xlate_timing(np, "atmel,smc-ncs-rd-setup-ns",
- &timings->ncs_rd_setup_ns, required);
- if (ret)
- goto out;
-
- ret = at91_xlate_timing(np, "atmel,smc-nrd-setup-ns",
- &timings->nrd_setup_ns, required);
- if (ret)
- goto out;
-
- ret = at91_xlate_timing(np, "atmel,smc-ncs-wr-setup-ns",
- &timings->ncs_wr_setup_ns, required);
- if (ret)
- goto out;
+ unsigned int clk_rate = clk_get_rate(ebid->ebi->clk);
+ unsigned int clk_period_ns = NSEC_PER_SEC / clk_rate;
+ bool required = false;
+ unsigned int ncycles;
+ int ret, i;
+ u32 val;
- ret = at91_xlate_timing(np, "atmel,smc-nwe-setup-ns",
- &timings->nwe_setup_ns, required);
- if (ret)
- goto out;
+ ret = of_property_read_u32(np, "atmel,smc-tdf-ns", &val);
+ if (!ret) {
+ required = true;
+ ncycles = DIV_ROUND_UP(val, clk_period_ns);
+ if (ncycles > ATMEL_SMC_MODE_TDF_MAX ||
+ ncycles < ATMEL_SMC_MODE_TDF_MIN) {
+ ret = -EINVAL;
+ goto out;
+ }
- ret = at91_xlate_timing(np, "atmel,smc-ncs-rd-pulse-ns",
- &timings->ncs_rd_pulse_ns, required);
- if (ret)
- goto out;
+ smcconf->mode |= ATMEL_SMC_MODE_TDF(ncycles);
+ }
- ret = at91_xlate_timing(np, "atmel,smc-nrd-pulse-ns",
- &timings->nrd_pulse_ns, required);
- if (ret)
- goto out;
+ for (i = 0; i < ARRAY_SIZE(timings_xlate_table); i++) {
+ const struct atmel_smc_timing_xlate *xlate;
- ret = at91_xlate_timing(np, "atmel,smc-ncs-wr-pulse-ns",
- &timings->ncs_wr_pulse_ns, required);
- if (ret)
- goto out;
+ xlate = &timings_xlate_table[i];
- ret = at91_xlate_timing(np, "atmel,smc-nwe-pulse-ns",
- &timings->nwe_pulse_ns, required);
- if (ret)
- goto out;
-
- ret = at91_xlate_timing(np, "atmel,smc-nwe-cycle-ns",
- &timings->nwe_cycle_ns, required);
- if (ret)
- goto out;
+ ret = of_property_read_u32(np, xlate->name, &val);
+ if (ret) {
+ if (!required)
+ continue;
+ else
+ break;
+ }
- ret = at91_xlate_timing(np, "atmel,smc-nrd-cycle-ns",
- &timings->nrd_cycle_ns, required);
- if (ret)
- goto out;
+ if (!required) {
+ ret = -EINVAL;
+ break;
+ }
- ret = at91_xlate_timing(np, "atmel,smc-tdf-ns",
- &timings->tdf_ns, required);
+ ncycles = DIV_ROUND_UP(val, clk_period_ns);
+ ret = xlate->converter(smcconf, xlate->shift, ncycles);
+ if (ret)
+ goto out;
+ }
out:
- if (ret)
+ if (ret) {
dev_err(ebid->ebi->dev,
"missing or invalid timings definition in %s",
np->full_name);
+ return ret;
+ }
- return ret;
+ return required;
}
-static int at91sam9_ebi_xslate_config(struct at91_ebi_dev *ebid,
+static int at91_ebi_xslate_smc_config(struct at91_ebi_dev *ebid,
struct device_node *np,
struct at91_ebi_dev_config *conf)
{
- struct at91sam9_ebi_dev_config *config = &conf->sam9;
+ struct atmel_smc_cs_conf *smcconf = &conf->smcconf;
bool required = false;
const char *tmp_str;
u32 tmp;
@@ -240,15 +179,15 @@ static int at91sam9_ebi_xslate_config(struct at91_ebi_dev *ebid,
if (!ret) {
switch (tmp) {
case 8:
- config->mode |= AT91_SMC_DBW_8;
+ smcconf->mode |= ATMEL_SMC_MODE_DBW_8;
break;
case 16:
- config->mode |= AT91_SMC_DBW_16;
+ smcconf->mode |= ATMEL_SMC_MODE_DBW_16;
break;
case 32:
- config->mode |= AT91_SMC_DBW_32;
+ smcconf->mode |= ATMEL_SMC_MODE_DBW_32;
break;
default:
@@ -259,28 +198,28 @@ static int at91sam9_ebi_xslate_config(struct at91_ebi_dev *ebid,
}
if (of_property_read_bool(np, "atmel,smc-tdf-optimized")) {
- config->mode |= AT91_SMC_TDFMODE_OPTIMIZED;
+ smcconf->mode |= ATMEL_SMC_MODE_TDFMODE_OPTIMIZED;
required = true;
}
tmp_str = NULL;
of_property_read_string(np, "atmel,smc-byte-access-type", &tmp_str);
if (tmp_str && !strcmp(tmp_str, "write")) {
- config->mode |= AT91_SMC_BAT_WRITE;
+ smcconf->mode |= ATMEL_SMC_MODE_BAT_WRITE;
required = true;
}
tmp_str = NULL;
of_property_read_string(np, "atmel,smc-read-mode", &tmp_str);
if (tmp_str && !strcmp(tmp_str, "nrd")) {
- config->mode |= AT91_SMC_READMODE_NRD;
+ smcconf->mode |= ATMEL_SMC_MODE_READMODE_NRD;
required = true;
}
tmp_str = NULL;
of_property_read_string(np, "atmel,smc-write-mode", &tmp_str);
if (tmp_str && !strcmp(tmp_str, "nwe")) {
- config->mode |= AT91_SMC_WRITEMODE_NWE;
+ smcconf->mode |= ATMEL_SMC_MODE_WRITEMODE_NWE;
required = true;
}
@@ -288,9 +227,9 @@ static int at91sam9_ebi_xslate_config(struct at91_ebi_dev *ebid,
of_property_read_string(np, "atmel,smc-exnw-mode", &tmp_str);
if (tmp_str) {
if (!strcmp(tmp_str, "frozen"))
- config->mode |= AT91_SMC_EXNWMODE_FROZEN;
+ smcconf->mode |= ATMEL_SMC_MODE_EXNWMODE_FROZEN;
else if (!strcmp(tmp_str, "ready"))
- config->mode |= AT91_SMC_EXNWMODE_READY;
+ smcconf->mode |= ATMEL_SMC_MODE_EXNWMODE_READY;
else if (strcmp(tmp_str, "disabled"))
return -EINVAL;
@@ -301,155 +240,54 @@ static int at91sam9_ebi_xslate_config(struct at91_ebi_dev *ebid,
if (!ret) {
switch (tmp) {
case 4:
- config->mode |= AT91_SMC_PS_4;
+ smcconf->mode |= ATMEL_SMC_MODE_PS_4;
break;
case 8:
- config->mode |= AT91_SMC_PS_8;
+ smcconf->mode |= ATMEL_SMC_MODE_PS_8;
break;
case 16:
- config->mode |= AT91_SMC_PS_16;
+ smcconf->mode |= ATMEL_SMC_MODE_PS_16;
break;
case 32:
- config->mode |= AT91_SMC_PS_32;
+ smcconf->mode |= ATMEL_SMC_MODE_PS_32;
break;
default:
return -EINVAL;
}
- config->mode |= AT91_SMC_PMEN;
+ smcconf->mode |= ATMEL_SMC_MODE_PMEN;
required = true;
}
- ret = at91sam9_smc_xslate_timings(ebid, np, &config->timings,
- &required);
+ ret = at91_ebi_xslate_smc_timings(ebid, np, &conf->smcconf);
if (ret)
- return ret;
-
- return required;
-}
-
-static int at91sam9_ebi_apply_config(struct at91_ebi_dev *ebid,
- struct at91_ebi_dev_config *conf)
-{
- unsigned int clk_rate = clk_get_rate(ebid->ebi->clk);
- unsigned int clk_period = NSEC_PER_SEC / clk_rate;
- struct at91sam9_ebi_dev_config *config = &conf->sam9;
- struct at91sam9_smc_timings *timings = &config->timings;
- struct at91sam9_smc_generic_fields *fields = &ebid->ebi->sam9;
- u32 coded_val;
- u32 val;
+ return -EINVAL;
- coded_val = at91sam9_smc_setup_ns_to_cycles(clk_rate,
- timings->ncs_rd_setup_ns);
- val = AT91SAM9_SMC_NCS_NRDSETUP(coded_val);
- coded_val = at91sam9_smc_setup_ns_to_cycles(clk_rate,
- timings->nrd_setup_ns);
- val |= AT91SAM9_SMC_NRDSETUP(coded_val);
- coded_val = at91sam9_smc_setup_ns_to_cycles(clk_rate,
- timings->ncs_wr_setup_ns);
- val |= AT91SAM9_SMC_NCS_WRSETUP(coded_val);
- coded_val = at91sam9_smc_setup_ns_to_cycles(clk_rate,
- timings->nwe_setup_ns);
- val |= AT91SAM9_SMC_NWESETUP(coded_val);
- regmap_fields_write(fields->setup, conf->cs, val);
-
- coded_val = at91sam9_smc_pulse_ns_to_cycles(clk_rate,
- timings->ncs_rd_pulse_ns);
- val = AT91SAM9_SMC_NCS_NRDPULSE(coded_val);
- coded_val = at91sam9_smc_pulse_ns_to_cycles(clk_rate,
- timings->nrd_pulse_ns);
- val |= AT91SAM9_SMC_NRDPULSE(coded_val);
- coded_val = at91sam9_smc_pulse_ns_to_cycles(clk_rate,
- timings->ncs_wr_pulse_ns);
- val |= AT91SAM9_SMC_NCS_WRPULSE(coded_val);
- coded_val = at91sam9_smc_pulse_ns_to_cycles(clk_rate,
- timings->nwe_pulse_ns);
- val |= AT91SAM9_SMC_NWEPULSE(coded_val);
- regmap_fields_write(fields->pulse, conf->cs, val);
-
- coded_val = at91sam9_smc_cycle_ns_to_cycles(clk_rate,
- timings->nrd_cycle_ns);
- val = AT91SAM9_SMC_NRDCYCLE(coded_val);
- coded_val = at91sam9_smc_cycle_ns_to_cycles(clk_rate,
- timings->nwe_cycle_ns);
- val |= AT91SAM9_SMC_NWECYCLE(coded_val);
- regmap_fields_write(fields->cycle, conf->cs, val);
-
- val = DIV_ROUND_UP(timings->tdf_ns, clk_period);
- if (val > AT91_SMC_TDF_MAX)
- val = AT91_SMC_TDF_MAX;
- regmap_fields_write(fields->mode, conf->cs,
- config->mode | AT91_SMC_TDF_(val));
+ if ((ret > 0 && !required) || (!ret && required)) {
+ dev_err(ebid->ebi->dev, "missing atmel,smc- properties in %s",
+ np->full_name);
+ return -EINVAL;
+ }
- return 0;
+ return required;
}
-static int at91sam9_ebi_init(struct at91_ebi *ebi)
+static void at91sam9_ebi_apply_config(struct at91_ebi_dev *ebid,
+ struct at91_ebi_dev_config *conf)
{
- struct at91sam9_smc_generic_fields *fields = &ebi->sam9;
- struct reg_field field = REG_FIELD(0, 0, 31);
-
- field.id_size = fls(ebi->caps->available_cs);
- field.id_offset = AT91SAM9_SMC_GENERIC_BLK_SZ;
-
- field.reg = AT91SAM9_SMC_SETUP(AT91SAM9_SMC_GENERIC);
- fields->setup = devm_regmap_field_alloc(ebi->dev, ebi->smc.regmap,
- field);
- if (IS_ERR(fields->setup))
- return PTR_ERR(fields->setup);
-
- field.reg = AT91SAM9_SMC_PULSE(AT91SAM9_SMC_GENERIC);
- fields->pulse = devm_regmap_field_alloc(ebi->dev, ebi->smc.regmap,
- field);
- if (IS_ERR(fields->pulse))
- return PTR_ERR(fields->pulse);
-
- field.reg = AT91SAM9_SMC_CYCLE(AT91SAM9_SMC_GENERIC);
- fields->cycle = devm_regmap_field_alloc(ebi->dev, ebi->smc.regmap,
- field);
- if (IS_ERR(fields->cycle))
- return PTR_ERR(fields->cycle);
-
- field.reg = AT91SAM9_SMC_MODE(AT91SAM9_SMC_GENERIC);
- fields->mode = devm_regmap_field_alloc(ebi->dev, ebi->smc.regmap,
- field);
- return PTR_ERR_OR_ZERO(fields->mode);
+ atmel_smc_cs_conf_apply(ebid->ebi->smc.regmap, conf->cs,
+ &conf->smcconf);
}
-static int sama5d3_ebi_init(struct at91_ebi *ebi)
+static void sama5_ebi_apply_config(struct at91_ebi_dev *ebid,
+ struct at91_ebi_dev_config *conf)
{
- struct at91sam9_smc_generic_fields *fields = &ebi->sam9;
- struct reg_field field = REG_FIELD(0, 0, 31);
-
- field.id_size = fls(ebi->caps->available_cs);
- field.id_offset = SAMA5_SMC_GENERIC_BLK_SZ;
-
- field.reg = AT91SAM9_SMC_SETUP(SAMA5_SMC_GENERIC);
- fields->setup = devm_regmap_field_alloc(ebi->dev, ebi->smc.regmap,
- field);
- if (IS_ERR(fields->setup))
- return PTR_ERR(fields->setup);
-
- field.reg = AT91SAM9_SMC_PULSE(SAMA5_SMC_GENERIC);
- fields->pulse = devm_regmap_field_alloc(ebi->dev, ebi->smc.regmap,
- field);
- if (IS_ERR(fields->pulse))
- return PTR_ERR(fields->pulse);
-
- field.reg = AT91SAM9_SMC_CYCLE(SAMA5_SMC_GENERIC);
- fields->cycle = devm_regmap_field_alloc(ebi->dev, ebi->smc.regmap,
- field);
- if (IS_ERR(fields->cycle))
- return PTR_ERR(fields->cycle);
-
- field.reg = SAMA5_SMC_MODE(SAMA5_SMC_GENERIC);
- fields->mode = devm_regmap_field_alloc(ebi->dev, ebi->smc.regmap,
- field);
- return PTR_ERR_OR_ZERO(fields->mode);
+ atmel_hsmc_cs_conf_apply(ebid->ebi->smc.regmap, conf->cs,
+ &conf->smcconf);
}
static int at91_ebi_dev_setup(struct at91_ebi *ebi, struct device_node *np,
@@ -508,9 +346,7 @@ static int at91_ebi_dev_setup(struct at91_ebi *ebi, struct device_node *np,
if (apply) {
conf.cs = cs;
- ret = caps->apply_config(ebid, &conf);
- if (ret)
- return ret;
+ caps->apply_config(ebid, &conf);
}
caps->get_config(ebid, &ebid->configs[i]);
@@ -539,9 +375,8 @@ static const struct at91_ebi_caps at91sam9260_ebi_caps = {
.available_cs = 0xff,
.ebi_csa = &at91sam9260_ebi_csa,
.get_config = at91sam9_ebi_get_config,
- .xlate_config = at91sam9_ebi_xslate_config,
+ .xlate_config = at91_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
- .init = at91sam9_ebi_init,
};
static const struct reg_field at91sam9261_ebi_csa =
@@ -552,9 +387,8 @@ static const struct at91_ebi_caps at91sam9261_ebi_caps = {
.available_cs = 0xff,
.ebi_csa = &at91sam9261_ebi_csa,
.get_config = at91sam9_ebi_get_config,
- .xlate_config = at91sam9_ebi_xslate_config,
+ .xlate_config = at91_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
- .init = at91sam9_ebi_init,
};
static const struct reg_field at91sam9263_ebi0_csa =
@@ -565,9 +399,8 @@ static const struct at91_ebi_caps at91sam9263_ebi0_caps = {
.available_cs = 0x3f,
.ebi_csa = &at91sam9263_ebi0_csa,
.get_config = at91sam9_ebi_get_config,
- .xlate_config = at91sam9_ebi_xslate_config,
+ .xlate_config = at91_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
- .init = at91sam9_ebi_init,
};
static const struct reg_field at91sam9263_ebi1_csa =
@@ -578,9 +411,8 @@ static const struct at91_ebi_caps at91sam9263_ebi1_caps = {
.available_cs = 0x7,
.ebi_csa = &at91sam9263_ebi1_csa,
.get_config = at91sam9_ebi_get_config,
- .xlate_config = at91sam9_ebi_xslate_config,
+ .xlate_config = at91_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
- .init = at91sam9_ebi_init,
};
static const struct reg_field at91sam9rl_ebi_csa =
@@ -591,9 +423,8 @@ static const struct at91_ebi_caps at91sam9rl_ebi_caps = {
.available_cs = 0x3f,
.ebi_csa = &at91sam9rl_ebi_csa,
.get_config = at91sam9_ebi_get_config,
- .xlate_config = at91sam9_ebi_xslate_config,
+ .xlate_config = at91_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
- .init = at91sam9_ebi_init,
};
static const struct reg_field at91sam9g45_ebi_csa =
@@ -604,26 +435,23 @@ static const struct at91_ebi_caps at91sam9g45_ebi_caps = {
.available_cs = 0x3f,
.ebi_csa = &at91sam9g45_ebi_csa,
.get_config = at91sam9_ebi_get_config,
- .xlate_config = at91sam9_ebi_xslate_config,
+ .xlate_config = at91_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
- .init = at91sam9_ebi_init,
};
static const struct at91_ebi_caps at91sam9x5_ebi_caps = {
.available_cs = 0x3f,
.ebi_csa = &at91sam9263_ebi0_csa,
.get_config = at91sam9_ebi_get_config,
- .xlate_config = at91sam9_ebi_xslate_config,
+ .xlate_config = at91_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
- .init = at91sam9_ebi_init,
};
static const struct at91_ebi_caps sama5d3_ebi_caps = {
.available_cs = 0xf,
- .get_config = at91sam9_ebi_get_config,
- .xlate_config = at91sam9_ebi_xslate_config,
- .apply_config = at91sam9_ebi_apply_config,
- .init = sama5d3_ebi_init,
+ .get_config = sama5_ebi_get_config,
+ .xlate_config = at91_ebi_xslate_smc_config,
+ .apply_config = sama5_ebi_apply_config,
};
static const struct of_device_id at91_ebi_id_table[] = {
@@ -745,10 +573,6 @@ static int at91_ebi_probe(struct platform_device *pdev)
return PTR_ERR(ebi->ebi_csa);
}
- ret = ebi->caps->init(ebi);
- if (ret)
- return ret;
-
ret = of_property_read_u32(np, "#address-cells", &val);
if (ret) {
dev_err(dev, "missing #address-cells property\n");
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v2 3/7] memory: atmel-ebi: Stop using reg_field objects for simple things
2017-03-16 8:30 [PATCH 0/7] memory: atmel-ebi: Add PM ops Boris Brezillon
2017-03-16 8:30 ` [PATCH v2 1/7] mfd: syscon: atmel-smc: Add new helpers to ease SMC regs manipulation Boris Brezillon
2017-03-16 8:30 ` [PATCH v2 2/7] memory: atmel-ebi: Simplify SMC config code Boris Brezillon
@ 2017-03-16 8:30 ` Boris Brezillon
2017-03-16 8:30 ` [PATCH v2 4/7] mfd: syscon: atmel-smc: Remove unused helpers/macros Boris Brezillon
` (5 subsequent siblings)
8 siblings, 0 replies; 17+ messages in thread
From: Boris Brezillon @ 2017-03-16 8:30 UTC (permalink / raw)
To: linux-arm-kernel
Turn the ->ebi_csa reg field into a simple offset that can be used with
with the matrix regmap. Using reg fields was overkill for this use case.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/memory/atmel-ebi.c | 55 +++++++++++-----------------------------------
1 file changed, 13 insertions(+), 42 deletions(-)
diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c
index e1b8590e7d23..8640da386d32 100644
--- a/drivers/memory/atmel-ebi.c
+++ b/drivers/memory/atmel-ebi.c
@@ -35,7 +35,7 @@ struct at91_ebi_dev {
struct at91_ebi_caps {
unsigned int available_cs;
- const struct reg_field *ebi_csa;
+ unsigned int ebi_csa_offs;
void (*get_config)(struct at91_ebi_dev *ebid,
struct at91_ebi_dev_config *conf);
int (*xlate_config)(struct at91_ebi_dev *ebid,
@@ -52,7 +52,6 @@ struct at91_ebi {
struct regmap *regmap;
struct clk *clk;
} smc;
- struct regmap_field *ebi_csa;
struct device *dev;
const struct at91_ebi_caps *caps;
@@ -355,9 +354,10 @@ static int at91_ebi_dev_setup(struct at91_ebi *ebi, struct device_node *np,
* Attach the EBI device to the generic SMC logic if at least
* one "atmel,smc-" property is present.
*/
- if (ebi->ebi_csa && apply)
- regmap_field_update_bits(ebi->ebi_csa,
- BIT(cs), 0);
+ if (ebi->caps->ebi_csa_offs && apply)
+ regmap_update_bits(ebi->matrix,
+ ebi->caps->ebi_csa_offs,
+ BIT(cs), 0);
i++;
}
@@ -367,73 +367,49 @@ static int at91_ebi_dev_setup(struct at91_ebi *ebi, struct device_node *np,
return 0;
}
-static const struct reg_field at91sam9260_ebi_csa =
- REG_FIELD(AT91SAM9260_MATRIX_EBICSA, 0,
- AT91_MATRIX_EBI_NUM_CS - 1);
-
static const struct at91_ebi_caps at91sam9260_ebi_caps = {
.available_cs = 0xff,
- .ebi_csa = &at91sam9260_ebi_csa,
+ .ebi_csa_offs = AT91SAM9260_MATRIX_EBICSA,
.get_config = at91sam9_ebi_get_config,
.xlate_config = at91_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
};
-static const struct reg_field at91sam9261_ebi_csa =
- REG_FIELD(AT91SAM9261_MATRIX_EBICSA, 0,
- AT91_MATRIX_EBI_NUM_CS - 1);
-
static const struct at91_ebi_caps at91sam9261_ebi_caps = {
.available_cs = 0xff,
- .ebi_csa = &at91sam9261_ebi_csa,
+ .ebi_csa_offs = AT91SAM9261_MATRIX_EBICSA,
.get_config = at91sam9_ebi_get_config,
.xlate_config = at91_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
};
-static const struct reg_field at91sam9263_ebi0_csa =
- REG_FIELD(AT91SAM9263_MATRIX_EBI0CSA, 0,
- AT91_MATRIX_EBI_NUM_CS - 1);
-
static const struct at91_ebi_caps at91sam9263_ebi0_caps = {
.available_cs = 0x3f,
- .ebi_csa = &at91sam9263_ebi0_csa,
+ .ebi_csa_offs = AT91SAM9263_MATRIX_EBI0CSA,
.get_config = at91sam9_ebi_get_config,
.xlate_config = at91_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
};
-static const struct reg_field at91sam9263_ebi1_csa =
- REG_FIELD(AT91SAM9263_MATRIX_EBI1CSA, 0,
- AT91_MATRIX_EBI_NUM_CS - 1);
-
static const struct at91_ebi_caps at91sam9263_ebi1_caps = {
.available_cs = 0x7,
- .ebi_csa = &at91sam9263_ebi1_csa,
+ .ebi_csa_offs = AT91SAM9263_MATRIX_EBI1CSA,
.get_config = at91sam9_ebi_get_config,
.xlate_config = at91_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
};
-static const struct reg_field at91sam9rl_ebi_csa =
- REG_FIELD(AT91SAM9RL_MATRIX_EBICSA, 0,
- AT91_MATRIX_EBI_NUM_CS - 1);
-
static const struct at91_ebi_caps at91sam9rl_ebi_caps = {
.available_cs = 0x3f,
- .ebi_csa = &at91sam9rl_ebi_csa,
+ .ebi_csa_offs = AT91SAM9RL_MATRIX_EBICSA,
.get_config = at91sam9_ebi_get_config,
.xlate_config = at91_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
};
-static const struct reg_field at91sam9g45_ebi_csa =
- REG_FIELD(AT91SAM9G45_MATRIX_EBICSA, 0,
- AT91_MATRIX_EBI_NUM_CS - 1);
-
static const struct at91_ebi_caps at91sam9g45_ebi_caps = {
.available_cs = 0x3f,
- .ebi_csa = &at91sam9g45_ebi_csa,
+ .ebi_csa_offs = AT91SAM9G45_MATRIX_EBICSA,
.get_config = at91sam9_ebi_get_config,
.xlate_config = at91_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
@@ -441,7 +417,7 @@ static const struct at91_ebi_caps at91sam9g45_ebi_caps = {
static const struct at91_ebi_caps at91sam9x5_ebi_caps = {
.available_cs = 0x3f,
- .ebi_csa = &at91sam9263_ebi0_csa,
+ .ebi_csa_offs = AT91SAM9X5_MATRIX_EBICSA,
.get_config = at91sam9_ebi_get_config,
.xlate_config = at91_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
@@ -561,16 +537,11 @@ static int at91_ebi_probe(struct platform_device *pdev)
* The sama5d3 does not provide an EBICSA register and thus does need
* to access the matrix registers.
*/
- if (ebi->caps->ebi_csa) {
+ if (ebi->caps->ebi_csa_offs) {
ebi->matrix =
syscon_regmap_lookup_by_phandle(np, "atmel,matrix");
if (IS_ERR(ebi->matrix))
return PTR_ERR(ebi->matrix);
-
- ebi->ebi_csa = regmap_field_alloc(ebi->matrix,
- *ebi->caps->ebi_csa);
- if (IS_ERR(ebi->ebi_csa))
- return PTR_ERR(ebi->ebi_csa);
}
ret = of_property_read_u32(np, "#address-cells", &val);
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v2 4/7] mfd: syscon: atmel-smc: Remove unused helpers/macros
2017-03-16 8:30 [PATCH 0/7] memory: atmel-ebi: Add PM ops Boris Brezillon
` (2 preceding siblings ...)
2017-03-16 8:30 ` [PATCH v2 3/7] memory: atmel-ebi: Stop using reg_field objects for simple things Boris Brezillon
@ 2017-03-16 8:30 ` Boris Brezillon
2017-03-16 10:16 ` Lee Jones
2017-03-16 8:30 ` [PATCH v2 5/7] memory: atmel-ebi: Change naming scheme Boris Brezillon
` (4 subsequent siblings)
8 siblings, 1 reply; 17+ messages in thread
From: Boris Brezillon @ 2017-03-16 8:30 UTC (permalink / raw)
To: linux-arm-kernel
All macros prefixed with AT91[SAM9]_SMC have been replaced by equivalent
definitions prefixed with ATMEL_SMC, and the at91sam9_smc_xxxx() helpers
are no longer used.
Drop these definitions before someone starts using them again.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
include/linux/mfd/syscon/atmel-smc.h | 152 -----------------------------------
1 file changed, 152 deletions(-)
diff --git a/include/linux/mfd/syscon/atmel-smc.h b/include/linux/mfd/syscon/atmel-smc.h
index 00e6e3c8ee6f..afa266169800 100644
--- a/include/linux/mfd/syscon/atmel-smc.h
+++ b/include/linux/mfd/syscon/atmel-smc.h
@@ -17,58 +17,6 @@
#include <linux/kernel.h>
#include <linux/regmap.h>
-#define AT91SAM9_SMC_GENERIC 0x00
-#define AT91SAM9_SMC_GENERIC_BLK_SZ 0x10
-
-#define SAMA5_SMC_GENERIC 0x600
-#define SAMA5_SMC_GENERIC_BLK_SZ 0x14
-
-#define AT91SAM9_SMC_SETUP(o) ((o) + 0x00)
-#define AT91SAM9_SMC_NWESETUP(x) (x)
-#define AT91SAM9_SMC_NCS_WRSETUP(x) ((x) << 8)
-#define AT91SAM9_SMC_NRDSETUP(x) ((x) << 16)
-#define AT91SAM9_SMC_NCS_NRDSETUP(x) ((x) << 24)
-
-#define AT91SAM9_SMC_PULSE(o) ((o) + 0x04)
-#define AT91SAM9_SMC_NWEPULSE(x) (x)
-#define AT91SAM9_SMC_NCS_WRPULSE(x) ((x) << 8)
-#define AT91SAM9_SMC_NRDPULSE(x) ((x) << 16)
-#define AT91SAM9_SMC_NCS_NRDPULSE(x) ((x) << 24)
-
-#define AT91SAM9_SMC_CYCLE(o) ((o) + 0x08)
-#define AT91SAM9_SMC_NWECYCLE(x) (x)
-#define AT91SAM9_SMC_NRDCYCLE(x) ((x) << 16)
-
-#define AT91SAM9_SMC_MODE(o) ((o) + 0x0c)
-#define SAMA5_SMC_MODE(o) ((o) + 0x10)
-#define AT91_SMC_READMODE BIT(0)
-#define AT91_SMC_READMODE_NCS (0 << 0)
-#define AT91_SMC_READMODE_NRD (1 << 0)
-#define AT91_SMC_WRITEMODE BIT(1)
-#define AT91_SMC_WRITEMODE_NCS (0 << 1)
-#define AT91_SMC_WRITEMODE_NWE (1 << 1)
-#define AT91_SMC_EXNWMODE GENMASK(5, 4)
-#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
-#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
-#define AT91_SMC_EXNWMODE_READY (3 << 4)
-#define AT91_SMC_BAT BIT(8)
-#define AT91_SMC_BAT_SELECT (0 << 8)
-#define AT91_SMC_BAT_WRITE (1 << 8)
-#define AT91_SMC_DBW GENMASK(13, 12)
-#define AT91_SMC_DBW_8 (0 << 12)
-#define AT91_SMC_DBW_16 (1 << 12)
-#define AT91_SMC_DBW_32 (2 << 12)
-#define AT91_SMC_TDF GENMASK(19, 16)
-#define AT91_SMC_TDF_(x) ((((x) - 1) << 16) & AT91_SMC_TDF)
-#define AT91_SMC_TDF_MAX 16
-#define AT91_SMC_TDFMODE_OPTIMIZED BIT(20)
-#define AT91_SMC_PMEN BIT(24)
-#define AT91_SMC_PS GENMASK(29, 28)
-#define AT91_SMC_PS_4 (0 << 28)
-#define AT91_SMC_PS_8 (1 << 28)
-#define AT91_SMC_PS_16 (2 << 28)
-#define AT91_SMC_PS_32 (3 << 28)
-
#define ATMEL_SMC_SETUP(cs) (((cs) * 0x10))
#define ATMEL_HSMC_SETUP(cs) (0x600 + ((cs) * 0x14))
#define ATMEL_SMC_PULSE(cs) (((cs) * 0x10) + 0x4)
@@ -157,104 +105,4 @@ void atmel_smc_cs_conf_get(struct regmap *regmap, int cs,
void atmel_hsmc_cs_conf_get(struct regmap *regmap, int cs,
struct atmel_smc_cs_conf *conf);
-/*
- * This function converts a setup timing expressed in nanoseconds into an
- * encoded value that can be written in the SMC_SETUP register.
- *
- * The following formula is described in atmel datasheets (section
- * "SMC Setup Register"):
- *
- * setup length = (128* SETUP[5] + SETUP[4:0])
- *
- * where setup length is the timing expressed in cycles.
- */
-static inline u32 at91sam9_smc_setup_ns_to_cycles(unsigned int clk_rate,
- u32 timing_ns)
-{
- u32 clk_period = DIV_ROUND_UP(NSEC_PER_SEC, clk_rate);
- u32 coded_cycles = 0;
- u32 cycles;
-
- cycles = DIV_ROUND_UP(timing_ns, clk_period);
- if (cycles / 32) {
- coded_cycles |= 1 << 5;
- if (cycles < 128)
- cycles = 0;
- }
-
- coded_cycles |= cycles % 32;
-
- return coded_cycles;
-}
-
-/*
- * This function converts a pulse timing expressed in nanoseconds into an
- * encoded value that can be written in the SMC_PULSE register.
- *
- * The following formula is described in atmel datasheets (section
- * "SMC Pulse Register"):
- *
- * pulse length = (256* PULSE[6] + PULSE[5:0])
- *
- * where pulse length is the timing expressed in cycles.
- */
-static inline u32 at91sam9_smc_pulse_ns_to_cycles(unsigned int clk_rate,
- u32 timing_ns)
-{
- u32 clk_period = DIV_ROUND_UP(NSEC_PER_SEC, clk_rate);
- u32 coded_cycles = 0;
- u32 cycles;
-
- cycles = DIV_ROUND_UP(timing_ns, clk_period);
- if (cycles / 64) {
- coded_cycles |= 1 << 6;
- if (cycles < 256)
- cycles = 0;
- }
-
- coded_cycles |= cycles % 64;
-
- return coded_cycles;
-}
-
-/*
- * This function converts a cycle timing expressed in nanoseconds into an
- * encoded value that can be written in the SMC_CYCLE register.
- *
- * The following formula is described in atmel datasheets (section
- * "SMC Cycle Register"):
- *
- * cycle length = (CYCLE[8:7]*256 + CYCLE[6:0])
- *
- * where cycle length is the timing expressed in cycles.
- */
-static inline u32 at91sam9_smc_cycle_ns_to_cycles(unsigned int clk_rate,
- u32 timing_ns)
-{
- u32 clk_period = DIV_ROUND_UP(NSEC_PER_SEC, clk_rate);
- u32 coded_cycles = 0;
- u32 cycles;
-
- cycles = DIV_ROUND_UP(timing_ns, clk_period);
- if (cycles / 128) {
- coded_cycles = cycles / 256;
- cycles %= 256;
- if (cycles >= 128) {
- coded_cycles++;
- cycles = 0;
- }
-
- if (coded_cycles > 0x3) {
- coded_cycles = 0x3;
- cycles = 0x7f;
- }
-
- coded_cycles <<= 7;
- }
-
- coded_cycles |= cycles % 128;
-
- return coded_cycles;
-}
-
#endif /* _LINUX_MFD_SYSCON_ATMEL_SMC_H_ */
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v2 4/7] mfd: syscon: atmel-smc: Remove unused helpers/macros
2017-03-16 8:30 ` [PATCH v2 4/7] mfd: syscon: atmel-smc: Remove unused helpers/macros Boris Brezillon
@ 2017-03-16 10:16 ` Lee Jones
2017-03-16 10:34 ` Boris Brezillon
0 siblings, 1 reply; 17+ messages in thread
From: Lee Jones @ 2017-03-16 10:16 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, 16 Mar 2017, Boris Brezillon wrote:
> All macros prefixed with AT91[SAM9]_SMC have been replaced by equivalent
> definitions prefixed with ATMEL_SMC, and the at91sam9_smc_xxxx() helpers
> are no longer used.
> Drop these definitions before someone starts using them again.
>
> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> ---
> include/linux/mfd/syscon/atmel-smc.h | 152 -----------------------------------
> 1 file changed, 152 deletions(-)
For my own reference:
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
What is the plan for this set?
I only see 2 patches. Can they both be applied?
> diff --git a/include/linux/mfd/syscon/atmel-smc.h b/include/linux/mfd/syscon/atmel-smc.h
> index 00e6e3c8ee6f..afa266169800 100644
> --- a/include/linux/mfd/syscon/atmel-smc.h
> +++ b/include/linux/mfd/syscon/atmel-smc.h
> @@ -17,58 +17,6 @@
> #include <linux/kernel.h>
> #include <linux/regmap.h>
>
> -#define AT91SAM9_SMC_GENERIC 0x00
> -#define AT91SAM9_SMC_GENERIC_BLK_SZ 0x10
> -
> -#define SAMA5_SMC_GENERIC 0x600
> -#define SAMA5_SMC_GENERIC_BLK_SZ 0x14
> -
> -#define AT91SAM9_SMC_SETUP(o) ((o) + 0x00)
> -#define AT91SAM9_SMC_NWESETUP(x) (x)
> -#define AT91SAM9_SMC_NCS_WRSETUP(x) ((x) << 8)
> -#define AT91SAM9_SMC_NRDSETUP(x) ((x) << 16)
> -#define AT91SAM9_SMC_NCS_NRDSETUP(x) ((x) << 24)
> -
> -#define AT91SAM9_SMC_PULSE(o) ((o) + 0x04)
> -#define AT91SAM9_SMC_NWEPULSE(x) (x)
> -#define AT91SAM9_SMC_NCS_WRPULSE(x) ((x) << 8)
> -#define AT91SAM9_SMC_NRDPULSE(x) ((x) << 16)
> -#define AT91SAM9_SMC_NCS_NRDPULSE(x) ((x) << 24)
> -
> -#define AT91SAM9_SMC_CYCLE(o) ((o) + 0x08)
> -#define AT91SAM9_SMC_NWECYCLE(x) (x)
> -#define AT91SAM9_SMC_NRDCYCLE(x) ((x) << 16)
> -
> -#define AT91SAM9_SMC_MODE(o) ((o) + 0x0c)
> -#define SAMA5_SMC_MODE(o) ((o) + 0x10)
> -#define AT91_SMC_READMODE BIT(0)
> -#define AT91_SMC_READMODE_NCS (0 << 0)
> -#define AT91_SMC_READMODE_NRD (1 << 0)
> -#define AT91_SMC_WRITEMODE BIT(1)
> -#define AT91_SMC_WRITEMODE_NCS (0 << 1)
> -#define AT91_SMC_WRITEMODE_NWE (1 << 1)
> -#define AT91_SMC_EXNWMODE GENMASK(5, 4)
> -#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
> -#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
> -#define AT91_SMC_EXNWMODE_READY (3 << 4)
> -#define AT91_SMC_BAT BIT(8)
> -#define AT91_SMC_BAT_SELECT (0 << 8)
> -#define AT91_SMC_BAT_WRITE (1 << 8)
> -#define AT91_SMC_DBW GENMASK(13, 12)
> -#define AT91_SMC_DBW_8 (0 << 12)
> -#define AT91_SMC_DBW_16 (1 << 12)
> -#define AT91_SMC_DBW_32 (2 << 12)
> -#define AT91_SMC_TDF GENMASK(19, 16)
> -#define AT91_SMC_TDF_(x) ((((x) - 1) << 16) & AT91_SMC_TDF)
> -#define AT91_SMC_TDF_MAX 16
> -#define AT91_SMC_TDFMODE_OPTIMIZED BIT(20)
> -#define AT91_SMC_PMEN BIT(24)
> -#define AT91_SMC_PS GENMASK(29, 28)
> -#define AT91_SMC_PS_4 (0 << 28)
> -#define AT91_SMC_PS_8 (1 << 28)
> -#define AT91_SMC_PS_16 (2 << 28)
> -#define AT91_SMC_PS_32 (3 << 28)
> -
> #define ATMEL_SMC_SETUP(cs) (((cs) * 0x10))
> #define ATMEL_HSMC_SETUP(cs) (0x600 + ((cs) * 0x14))
> #define ATMEL_SMC_PULSE(cs) (((cs) * 0x10) + 0x4)
> @@ -157,104 +105,4 @@ void atmel_smc_cs_conf_get(struct regmap *regmap, int cs,
> void atmel_hsmc_cs_conf_get(struct regmap *regmap, int cs,
> struct atmel_smc_cs_conf *conf);
>
> -/*
> - * This function converts a setup timing expressed in nanoseconds into an
> - * encoded value that can be written in the SMC_SETUP register.
> - *
> - * The following formula is described in atmel datasheets (section
> - * "SMC Setup Register"):
> - *
> - * setup length = (128* SETUP[5] + SETUP[4:0])
> - *
> - * where setup length is the timing expressed in cycles.
> - */
> -static inline u32 at91sam9_smc_setup_ns_to_cycles(unsigned int clk_rate,
> - u32 timing_ns)
> -{
> - u32 clk_period = DIV_ROUND_UP(NSEC_PER_SEC, clk_rate);
> - u32 coded_cycles = 0;
> - u32 cycles;
> -
> - cycles = DIV_ROUND_UP(timing_ns, clk_period);
> - if (cycles / 32) {
> - coded_cycles |= 1 << 5;
> - if (cycles < 128)
> - cycles = 0;
> - }
> -
> - coded_cycles |= cycles % 32;
> -
> - return coded_cycles;
> -}
> -
> -/*
> - * This function converts a pulse timing expressed in nanoseconds into an
> - * encoded value that can be written in the SMC_PULSE register.
> - *
> - * The following formula is described in atmel datasheets (section
> - * "SMC Pulse Register"):
> - *
> - * pulse length = (256* PULSE[6] + PULSE[5:0])
> - *
> - * where pulse length is the timing expressed in cycles.
> - */
> -static inline u32 at91sam9_smc_pulse_ns_to_cycles(unsigned int clk_rate,
> - u32 timing_ns)
> -{
> - u32 clk_period = DIV_ROUND_UP(NSEC_PER_SEC, clk_rate);
> - u32 coded_cycles = 0;
> - u32 cycles;
> -
> - cycles = DIV_ROUND_UP(timing_ns, clk_period);
> - if (cycles / 64) {
> - coded_cycles |= 1 << 6;
> - if (cycles < 256)
> - cycles = 0;
> - }
> -
> - coded_cycles |= cycles % 64;
> -
> - return coded_cycles;
> -}
> -
> -/*
> - * This function converts a cycle timing expressed in nanoseconds into an
> - * encoded value that can be written in the SMC_CYCLE register.
> - *
> - * The following formula is described in atmel datasheets (section
> - * "SMC Cycle Register"):
> - *
> - * cycle length = (CYCLE[8:7]*256 + CYCLE[6:0])
> - *
> - * where cycle length is the timing expressed in cycles.
> - */
> -static inline u32 at91sam9_smc_cycle_ns_to_cycles(unsigned int clk_rate,
> - u32 timing_ns)
> -{
> - u32 clk_period = DIV_ROUND_UP(NSEC_PER_SEC, clk_rate);
> - u32 coded_cycles = 0;
> - u32 cycles;
> -
> - cycles = DIV_ROUND_UP(timing_ns, clk_period);
> - if (cycles / 128) {
> - coded_cycles = cycles / 256;
> - cycles %= 256;
> - if (cycles >= 128) {
> - coded_cycles++;
> - cycles = 0;
> - }
> -
> - if (coded_cycles > 0x3) {
> - coded_cycles = 0x3;
> - cycles = 0x7f;
> - }
> -
> - coded_cycles <<= 7;
> - }
> -
> - coded_cycles |= cycles % 128;
> -
> - return coded_cycles;
> -}
> -
> #endif /* _LINUX_MFD_SYSCON_ATMEL_SMC_H_ */
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH v2 4/7] mfd: syscon: atmel-smc: Remove unused helpers/macros
2017-03-16 10:16 ` Lee Jones
@ 2017-03-16 10:34 ` Boris Brezillon
2017-03-16 12:18 ` Lee Jones
0 siblings, 1 reply; 17+ messages in thread
From: Boris Brezillon @ 2017-03-16 10:34 UTC (permalink / raw)
To: linux-arm-kernel
Hi Lee,
On Thu, 16 Mar 2017 10:16:27 +0000
Lee Jones <lee.jones@linaro.org> wrote:
> On Thu, 16 Mar 2017, Boris Brezillon wrote:
>
> > All macros prefixed with AT91[SAM9]_SMC have been replaced by equivalent
> > definitions prefixed with ATMEL_SMC, and the at91sam9_smc_xxxx() helpers
> > are no longer used.
> > Drop these definitions before someone starts using them again.
> >
> > Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> > ---
> > include/linux/mfd/syscon/atmel-smc.h | 152 -----------------------------------
> > 1 file changed, 152 deletions(-)
>
> For my own reference:
> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
>
> What is the plan for this set?
>
> I only see 2 patches.
You mean, you only see 2 patches in your Inbox (that would be weird,
because you're in the CC list of all patches), or only 2 patches that
should go in your tree?
> Can they both be applied?
All patches should go through the same tree, because changes in
drivers/memory/atmel-ebi.c are depending on changes done in the MFD
subsystem.
If Nicolas is okay with that, maybe you can take everything through the
MFD tree (I don't expect any conflicts in drivers/memory/atmel-ebi.c).
Regards,
Boris
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v2 4/7] mfd: syscon: atmel-smc: Remove unused helpers/macros
2017-03-16 10:34 ` Boris Brezillon
@ 2017-03-16 12:18 ` Lee Jones
2017-03-27 9:25 ` Nicolas Ferre
0 siblings, 1 reply; 17+ messages in thread
From: Lee Jones @ 2017-03-16 12:18 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, 16 Mar 2017, Boris Brezillon wrote:
> Hi Lee,
>
> On Thu, 16 Mar 2017 10:16:27 +0000
> Lee Jones <lee.jones@linaro.org> wrote:
>
> > On Thu, 16 Mar 2017, Boris Brezillon wrote:
> >
> > > All macros prefixed with AT91[SAM9]_SMC have been replaced by equivalent
> > > definitions prefixed with ATMEL_SMC, and the at91sam9_smc_xxxx() helpers
> > > are no longer used.
> > > Drop these definitions before someone starts using them again.
> > >
> > > Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> > > ---
> > > include/linux/mfd/syscon/atmel-smc.h | 152 -----------------------------------
> > > 1 file changed, 152 deletions(-)
> >
> > For my own reference:
> > Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
> >
> > What is the plan for this set?
> >
> > I only see 2 patches.
>
> You mean, you only see 2 patches in your Inbox (that would be weird,
> because you're in the CC list of all patches), or only 2 patches that
> should go in your tree?
I meant the former, but another pull down of my mail grabbed the
remaining patches.
> > Can they both be applied?
>
> All patches should go through the same tree, because changes in
> drivers/memory/atmel-ebi.c are depending on changes done in the MFD
> subsystem.
>
> If Nicolas is okay with that, maybe you can take everything through the
> MFD tree (I don't expect any conflicts in drivers/memory/atmel-ebi.c).
That would be okay by me.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v2 4/7] mfd: syscon: atmel-smc: Remove unused helpers/macros
2017-03-16 12:18 ` Lee Jones
@ 2017-03-27 9:25 ` Nicolas Ferre
0 siblings, 0 replies; 17+ messages in thread
From: Nicolas Ferre @ 2017-03-27 9:25 UTC (permalink / raw)
To: linux-arm-kernel
Le 16/03/2017 ? 13:18, Lee Jones a ?crit :
> On Thu, 16 Mar 2017, Boris Brezillon wrote:
>
>> Hi Lee,
>>
>> On Thu, 16 Mar 2017 10:16:27 +0000
>> Lee Jones <lee.jones@linaro.org> wrote:
>>
>>> On Thu, 16 Mar 2017, Boris Brezillon wrote:
>>>
>>>> All macros prefixed with AT91[SAM9]_SMC have been replaced by equivalent
>>>> definitions prefixed with ATMEL_SMC, and the at91sam9_smc_xxxx() helpers
>>>> are no longer used.
>>>> Drop these definitions before someone starts using them again.
>>>>
>>>> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
>>>> ---
>>>> include/linux/mfd/syscon/atmel-smc.h | 152 -----------------------------------
>>>> 1 file changed, 152 deletions(-)
>>>
>>> For my own reference:
>>> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
>>>
>>> What is the plan for this set?
>>>
>>> I only see 2 patches.
>>
>> You mean, you only see 2 patches in your Inbox (that would be weird,
>> because you're in the CC list of all patches), or only 2 patches that
>> should go in your tree?
>
> I meant the former, but another pull down of my mail grabbed the
> remaining patches.
>
>>> Can they both be applied?
>>
>> All patches should go through the same tree, because changes in
>> drivers/memory/atmel-ebi.c are depending on changes done in the MFD
>> subsystem.
>>
>> If Nicolas is okay with that, maybe you can take everything through the
>> MFD tree (I don't expect any conflicts in drivers/memory/atmel-ebi.c).
>
> That would be okay by me.
Yes I'm okay with that.
Thanks Lee for your support.
Regards,
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v2 5/7] memory: atmel-ebi: Change naming scheme
2017-03-16 8:30 [PATCH 0/7] memory: atmel-ebi: Add PM ops Boris Brezillon
` (3 preceding siblings ...)
2017-03-16 8:30 ` [PATCH v2 4/7] mfd: syscon: atmel-smc: Remove unused helpers/macros Boris Brezillon
@ 2017-03-16 8:30 ` Boris Brezillon
2017-03-16 8:30 ` [PATCH v2 6/7] memory: atmel-ebi: Add missing ->numcs assignment Boris Brezillon
` (3 subsequent siblings)
8 siblings, 0 replies; 17+ messages in thread
From: Boris Brezillon @ 2017-03-16 8:30 UTC (permalink / raw)
To: linux-arm-kernel
The EBI block is not only available on at91 SoCs, but also on avr32 ones.
Change the structure and function prefixes from at91_ebi to atmel_ebi to
match this fact and make the prefix and driver name consistent.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/memory/atmel-ebi.c | 120 ++++++++++++++++++++++-----------------------
1 file changed, 60 insertions(+), 60 deletions(-)
diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c
index 8640da386d32..8beba9a60d1c 100644
--- a/drivers/memory/atmel-ebi.c
+++ b/drivers/memory/atmel-ebi.c
@@ -18,34 +18,34 @@
#include <linux/of_device.h>
#include <linux/regmap.h>
-struct at91_ebi_dev_config {
+struct atmel_ebi_dev_config {
int cs;
struct atmel_smc_cs_conf smcconf;
};
-struct at91_ebi;
+struct atmel_ebi;
-struct at91_ebi_dev {
+struct atmel_ebi_dev {
struct list_head node;
- struct at91_ebi *ebi;
+ struct atmel_ebi *ebi;
u32 mode;
int numcs;
- struct at91_ebi_dev_config configs[];
+ struct atmel_ebi_dev_config configs[];
};
-struct at91_ebi_caps {
+struct atmel_ebi_caps {
unsigned int available_cs;
unsigned int ebi_csa_offs;
- void (*get_config)(struct at91_ebi_dev *ebid,
- struct at91_ebi_dev_config *conf);
- int (*xlate_config)(struct at91_ebi_dev *ebid,
+ void (*get_config)(struct atmel_ebi_dev *ebid,
+ struct atmel_ebi_dev_config *conf);
+ int (*xlate_config)(struct atmel_ebi_dev *ebid,
struct device_node *configs_np,
- struct at91_ebi_dev_config *conf);
- void (*apply_config)(struct at91_ebi_dev *ebid,
- struct at91_ebi_dev_config *conf);
+ struct atmel_ebi_dev_config *conf);
+ void (*apply_config)(struct atmel_ebi_dev *ebid,
+ struct atmel_ebi_dev_config *conf);
};
-struct at91_ebi {
+struct atmel_ebi {
struct clk *clk;
struct regmap *matrix;
struct {
@@ -54,7 +54,7 @@ struct at91_ebi {
} smc;
struct device *dev;
- const struct at91_ebi_caps *caps;
+ const struct atmel_ebi_caps *caps;
struct list_head devs;
};
@@ -74,15 +74,15 @@ struct atmel_smc_timing_xlate {
#define ATMEL_SMC_CYCLE_XLATE(nm, pos) \
{ .name = nm, .converter = atmel_smc_cs_conf_set_setup, .shift = pos}
-static void at91sam9_ebi_get_config(struct at91_ebi_dev *ebid,
- struct at91_ebi_dev_config *conf)
+static void at91sam9_ebi_get_config(struct atmel_ebi_dev *ebid,
+ struct atmel_ebi_dev_config *conf)
{
atmel_smc_cs_conf_get(ebid->ebi->smc.regmap, conf->cs,
&conf->smcconf);
}
-static void sama5_ebi_get_config(struct at91_ebi_dev *ebid,
- struct at91_ebi_dev_config *conf)
+static void sama5_ebi_get_config(struct atmel_ebi_dev *ebid,
+ struct atmel_ebi_dev_config *conf)
{
atmel_hsmc_cs_conf_get(ebid->ebi->smc.regmap, conf->cs,
&conf->smcconf);
@@ -105,9 +105,9 @@ static const struct atmel_smc_timing_xlate timings_xlate_table[] = {
ATMEL_SMC_CYCLE_XLATE("atmel,smc-nwe-cycle-ns", ATMEL_SMC_NWE_SHIFT),
};
-static int at91_ebi_xslate_smc_timings(struct at91_ebi_dev *ebid,
- struct device_node *np,
- struct atmel_smc_cs_conf *smcconf)
+static int atmel_ebi_xslate_smc_timings(struct atmel_ebi_dev *ebid,
+ struct device_node *np,
+ struct atmel_smc_cs_conf *smcconf)
{
unsigned int clk_rate = clk_get_rate(ebid->ebi->clk);
unsigned int clk_period_ns = NSEC_PER_SEC / clk_rate;
@@ -164,9 +164,9 @@ static int at91_ebi_xslate_smc_timings(struct at91_ebi_dev *ebid,
return required;
}
-static int at91_ebi_xslate_smc_config(struct at91_ebi_dev *ebid,
- struct device_node *np,
- struct at91_ebi_dev_config *conf)
+static int atmel_ebi_xslate_smc_config(struct atmel_ebi_dev *ebid,
+ struct device_node *np,
+ struct atmel_ebi_dev_config *conf)
{
struct atmel_smc_cs_conf *smcconf = &conf->smcconf;
bool required = false;
@@ -262,7 +262,7 @@ static int at91_ebi_xslate_smc_config(struct at91_ebi_dev *ebid,
required = true;
}
- ret = at91_ebi_xslate_smc_timings(ebid, np, &conf->smcconf);
+ ret = atmel_ebi_xslate_smc_timings(ebid, np, &conf->smcconf);
if (ret)
return -EINVAL;
@@ -275,27 +275,27 @@ static int at91_ebi_xslate_smc_config(struct at91_ebi_dev *ebid,
return required;
}
-static void at91sam9_ebi_apply_config(struct at91_ebi_dev *ebid,
- struct at91_ebi_dev_config *conf)
+static void at91sam9_ebi_apply_config(struct atmel_ebi_dev *ebid,
+ struct atmel_ebi_dev_config *conf)
{
atmel_smc_cs_conf_apply(ebid->ebi->smc.regmap, conf->cs,
&conf->smcconf);
}
-static void sama5_ebi_apply_config(struct at91_ebi_dev *ebid,
- struct at91_ebi_dev_config *conf)
+static void sama5_ebi_apply_config(struct atmel_ebi_dev *ebid,
+ struct atmel_ebi_dev_config *conf)
{
atmel_hsmc_cs_conf_apply(ebid->ebi->smc.regmap, conf->cs,
&conf->smcconf);
}
-static int at91_ebi_dev_setup(struct at91_ebi *ebi, struct device_node *np,
- int reg_cells)
+static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
+ int reg_cells)
{
- const struct at91_ebi_caps *caps = ebi->caps;
- struct at91_ebi_dev_config conf = { };
+ const struct atmel_ebi_caps *caps = ebi->caps;
+ struct atmel_ebi_dev_config conf = { };
struct device *dev = ebi->dev;
- struct at91_ebi_dev *ebid;
+ struct atmel_ebi_dev *ebid;
unsigned long cslines = 0;
int ret, numcs = 0, nentries, i;
bool apply = false;
@@ -367,70 +367,70 @@ static int at91_ebi_dev_setup(struct at91_ebi *ebi, struct device_node *np,
return 0;
}
-static const struct at91_ebi_caps at91sam9260_ebi_caps = {
+static const struct atmel_ebi_caps at91sam9260_ebi_caps = {
.available_cs = 0xff,
.ebi_csa_offs = AT91SAM9260_MATRIX_EBICSA,
.get_config = at91sam9_ebi_get_config,
- .xlate_config = at91_ebi_xslate_smc_config,
+ .xlate_config = atmel_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
};
-static const struct at91_ebi_caps at91sam9261_ebi_caps = {
+static const struct atmel_ebi_caps at91sam9261_ebi_caps = {
.available_cs = 0xff,
.ebi_csa_offs = AT91SAM9261_MATRIX_EBICSA,
.get_config = at91sam9_ebi_get_config,
- .xlate_config = at91_ebi_xslate_smc_config,
+ .xlate_config = atmel_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
};
-static const struct at91_ebi_caps at91sam9263_ebi0_caps = {
+static const struct atmel_ebi_caps at91sam9263_ebi0_caps = {
.available_cs = 0x3f,
.ebi_csa_offs = AT91SAM9263_MATRIX_EBI0CSA,
.get_config = at91sam9_ebi_get_config,
- .xlate_config = at91_ebi_xslate_smc_config,
+ .xlate_config = atmel_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
};
-static const struct at91_ebi_caps at91sam9263_ebi1_caps = {
+static const struct atmel_ebi_caps at91sam9263_ebi1_caps = {
.available_cs = 0x7,
.ebi_csa_offs = AT91SAM9263_MATRIX_EBI1CSA,
.get_config = at91sam9_ebi_get_config,
- .xlate_config = at91_ebi_xslate_smc_config,
+ .xlate_config = atmel_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
};
-static const struct at91_ebi_caps at91sam9rl_ebi_caps = {
+static const struct atmel_ebi_caps at91sam9rl_ebi_caps = {
.available_cs = 0x3f,
.ebi_csa_offs = AT91SAM9RL_MATRIX_EBICSA,
.get_config = at91sam9_ebi_get_config,
- .xlate_config = at91_ebi_xslate_smc_config,
+ .xlate_config = atmel_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
};
-static const struct at91_ebi_caps at91sam9g45_ebi_caps = {
+static const struct atmel_ebi_caps at91sam9g45_ebi_caps = {
.available_cs = 0x3f,
.ebi_csa_offs = AT91SAM9G45_MATRIX_EBICSA,
.get_config = at91sam9_ebi_get_config,
- .xlate_config = at91_ebi_xslate_smc_config,
+ .xlate_config = atmel_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
};
-static const struct at91_ebi_caps at91sam9x5_ebi_caps = {
+static const struct atmel_ebi_caps at91sam9x5_ebi_caps = {
.available_cs = 0x3f,
.ebi_csa_offs = AT91SAM9X5_MATRIX_EBICSA,
.get_config = at91sam9_ebi_get_config,
- .xlate_config = at91_ebi_xslate_smc_config,
+ .xlate_config = atmel_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
};
-static const struct at91_ebi_caps sama5d3_ebi_caps = {
+static const struct atmel_ebi_caps sama5d3_ebi_caps = {
.available_cs = 0xf,
.get_config = sama5_ebi_get_config,
- .xlate_config = at91_ebi_xslate_smc_config,
+ .xlate_config = atmel_ebi_xslate_smc_config,
.apply_config = sama5_ebi_apply_config,
};
-static const struct of_device_id at91_ebi_id_table[] = {
+static const struct of_device_id atmel_ebi_id_table[] = {
{
.compatible = "atmel,at91sam9260-ebi",
.data = &at91sam9260_ebi_caps,
@@ -466,7 +466,7 @@ static const struct of_device_id at91_ebi_id_table[] = {
{ /* sentinel */ }
};
-static int at91_ebi_dev_disable(struct at91_ebi *ebi, struct device_node *np)
+static int atmel_ebi_dev_disable(struct atmel_ebi *ebi, struct device_node *np)
{
struct device *dev = ebi->dev;
struct property *newprop;
@@ -488,17 +488,17 @@ static int at91_ebi_dev_disable(struct at91_ebi *ebi, struct device_node *np)
return of_update_property(np, newprop);
}
-static int at91_ebi_probe(struct platform_device *pdev)
+static int atmel_ebi_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *child, *np = dev->of_node, *smc_np;
const struct of_device_id *match;
- struct at91_ebi *ebi;
+ struct atmel_ebi *ebi;
int ret, reg_cells;
struct clk *clk;
u32 val;
- match = of_match_device(at91_ebi_id_table, dev);
+ match = of_match_device(atmel_ebi_id_table, dev);
if (!match || !match->data)
return -EINVAL;
@@ -564,12 +564,12 @@ static int at91_ebi_probe(struct platform_device *pdev)
if (!of_find_property(child, "reg", NULL))
continue;
- ret = at91_ebi_dev_setup(ebi, child, reg_cells);
+ ret = atmel_ebi_dev_setup(ebi, child, reg_cells);
if (ret) {
dev_err(dev, "failed to configure EBI bus for %s, disabling the device",
child->full_name);
- ret = at91_ebi_dev_disable(ebi, child);
+ ret = atmel_ebi_dev_disable(ebi, child);
if (ret)
return ret;
}
@@ -578,10 +578,10 @@ static int at91_ebi_probe(struct platform_device *pdev)
return of_platform_populate(np, NULL, NULL, dev);
}
-static struct platform_driver at91_ebi_driver = {
+static struct platform_driver atmel_ebi_driver = {
.driver = {
.name = "atmel-ebi",
- .of_match_table = at91_ebi_id_table,
+ .of_match_table = atmel_ebi_id_table,
},
};
-builtin_platform_driver_probe(at91_ebi_driver, at91_ebi_probe);
+builtin_platform_driver_probe(atmel_ebi_driver, atmel_ebi_probe);
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v2 6/7] memory: atmel-ebi: Add missing ->numcs assignment
2017-03-16 8:30 [PATCH 0/7] memory: atmel-ebi: Add PM ops Boris Brezillon
` (4 preceding siblings ...)
2017-03-16 8:30 ` [PATCH v2 5/7] memory: atmel-ebi: Change naming scheme Boris Brezillon
@ 2017-03-16 8:30 ` Boris Brezillon
2017-03-16 8:30 ` [PATCH v2 7/7] memory: atmel-ebi: Add PM ops Boris Brezillon
` (2 subsequent siblings)
8 siblings, 0 replies; 17+ messages in thread
From: Boris Brezillon @ 2017-03-16 8:30 UTC (permalink / raw)
To: linux-arm-kernel
ebid->numcs is never assigned, set it to numcs after allocating the
EBI dev object.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/memory/atmel-ebi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c
index 8beba9a60d1c..7d24a957e98c 100644
--- a/drivers/memory/atmel-ebi.c
+++ b/drivers/memory/atmel-ebi.c
@@ -332,6 +332,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
return -ENOMEM;
ebid->ebi = ebi;
+ ebid->numcs = numcs;
ret = caps->xlate_config(ebid, np, &conf);
if (ret < 0)
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v2 7/7] memory: atmel-ebi: Add PM ops
2017-03-16 8:30 [PATCH 0/7] memory: atmel-ebi: Add PM ops Boris Brezillon
` (5 preceding siblings ...)
2017-03-16 8:30 ` [PATCH v2 6/7] memory: atmel-ebi: Add missing ->numcs assignment Boris Brezillon
@ 2017-03-16 8:30 ` Boris Brezillon
2017-03-27 9:25 ` [PATCH 0/7] " Nicolas Ferre
2017-04-03 10:01 ` Lee Jones
8 siblings, 0 replies; 17+ messages in thread
From: Boris Brezillon @ 2017-03-16 8:30 UTC (permalink / raw)
To: linux-arm-kernel
Add a ->resume() hook to make sure the EBI dev configs are correctly
restored when resuming the platform.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/memory/atmel-ebi.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c
index 7d24a957e98c..35910f945bfa 100644
--- a/drivers/memory/atmel-ebi.c
+++ b/drivers/memory/atmel-ebi.c
@@ -507,6 +507,8 @@ static int atmel_ebi_probe(struct platform_device *pdev)
if (!ebi)
return -ENOMEM;
+ platform_set_drvdata(pdev, ebi);
+
INIT_LIST_HEAD(&ebi->devs);
ebi->caps = match->data;
ebi->dev = dev;
@@ -579,10 +581,28 @@ static int atmel_ebi_probe(struct platform_device *pdev)
return of_platform_populate(np, NULL, NULL, dev);
}
+static int atmel_ebi_resume(struct device *dev)
+{
+ struct atmel_ebi *ebi = dev_get_drvdata(dev);
+ struct atmel_ebi_dev *ebid;
+
+ list_for_each_entry(ebid, &ebi->devs, node) {
+ int i;
+
+ for (i = 0; i < ebid->numcs; i++)
+ ebid->ebi->caps->apply_config(ebid, &ebid->configs[i]);
+ }
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(atmel_ebi_pm_ops, NULL, atmel_ebi_resume);
+
static struct platform_driver atmel_ebi_driver = {
.driver = {
.name = "atmel-ebi",
.of_match_table = atmel_ebi_id_table,
+ .pm = &atmel_ebi_pm_ops,
},
};
builtin_platform_driver_probe(atmel_ebi_driver, atmel_ebi_probe);
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH 0/7] memory: atmel-ebi: Add PM ops
2017-03-16 8:30 [PATCH 0/7] memory: atmel-ebi: Add PM ops Boris Brezillon
` (6 preceding siblings ...)
2017-03-16 8:30 ` [PATCH v2 7/7] memory: atmel-ebi: Add PM ops Boris Brezillon
@ 2017-03-27 9:25 ` Nicolas Ferre
2017-03-27 15:14 ` Lee Jones
2017-04-03 10:01 ` Lee Jones
8 siblings, 1 reply; 17+ messages in thread
From: Nicolas Ferre @ 2017-03-27 9:25 UTC (permalink / raw)
To: linux-arm-kernel
Le 16/03/2017 ? 09:30, Boris Brezillon a ?crit :
> Hello,
>
> This patchset adds a ->resume() hook to the EBI driver, but a few more
> changes were required in order to easily implement this PM hook.
>
> Patches 1 to 5 are just cleanup patches to simplify the EBI driver.
> Patch 6 is fixing a bug in the EBI driver. Note that this bug has no
> consequences until we start implementing the ->resume() hook.
> And finally, patch 7 is implementing ->resume() so that the SMC config
> is correctly restored when resuming the system.
>
> This patchset depends on [1] which is removing the unused pata_at91
> driver, which in turn prevents us from patching it before dropping
> the old SMC macro definitions in patch 4.
>
> Regards,
>
> Boris
>
> [1]http://lkml.iu.edu/hypermail/linux/kernel/1702.2/00990.html
For the whole v2 series:
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Lee, you can take this series through your MFD tree as suggested by Boris.
Thanks, best regards,
> Changes since v1:
> - move helper functions in a C file
> - check if tdf is at least ATMEL_SMC_MODE_TDF_MIN
>
> Boris Brezillon (7):
> mfd: syscon: atmel-smc: Add new helpers to ease SMC regs manipulation
> memory: atmel-ebi: Simplify SMC config code
> memory: atmel-ebi: Stop using reg_field objects for simple things
> mfd: syscon: atmel-smc: Remove unused helpers/macros
> memory: atmel-ebi: Change naming scheme
> memory: atmel-ebi: Add missing ->numcs assignment
> memory: atmel-ebi: Add PM ops
>
> drivers/memory/Kconfig | 1 +
> drivers/memory/atmel-ebi.c | 584 ++++++++++++-----------------------
> drivers/mfd/Kconfig | 4 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/atmel-smc.c | 314 +++++++++++++++++++
> include/linux/mfd/syscon/atmel-smc.h | 237 ++++++--------
> 6 files changed, 606 insertions(+), 535 deletions(-)
> create mode 100644 drivers/mfd/atmel-smc.c
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 0/7] memory: atmel-ebi: Add PM ops
2017-03-27 9:25 ` [PATCH 0/7] " Nicolas Ferre
@ 2017-03-27 15:14 ` Lee Jones
2017-03-27 15:21 ` Alexandre Belloni
0 siblings, 1 reply; 17+ messages in thread
From: Lee Jones @ 2017-03-27 15:14 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, 27 Mar 2017, Nicolas Ferre wrote:
> Le 16/03/2017 ? 09:30, Boris Brezillon a ?crit :
> > Hello,
> >
> > This patchset adds a ->resume() hook to the EBI driver, but a few more
> > changes were required in order to easily implement this PM hook.
> >
> > Patches 1 to 5 are just cleanup patches to simplify the EBI driver.
> > Patch 6 is fixing a bug in the EBI driver. Note that this bug has no
> > consequences until we start implementing the ->resume() hook.
> > And finally, patch 7 is implementing ->resume() so that the SMC config
> > is correctly restored when resuming the system.
> >
> > This patchset depends on [1] which is removing the unused pata_at91
> > driver, which in turn prevents us from patching it before dropping
> > the old SMC macro definitions in patch 4.
> >
> > Regards,
> >
> > Boris
> >
> > [1]http://lkml.iu.edu/hypermail/linux/kernel/1702.2/00990.html
>
> For the whole v2 series:
> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
>
> Lee, you can take this series through your MFD tree as suggested by Boris.
There doesn't appear to be a Maintainer for the memory subsystem.
Who is the Maintainer for drivers/memory/atmel-ebi.c?
If it's you, would you care to add an entry to MAINTAINERS?
> > Changes since v1:
> > - move helper functions in a C file
> > - check if tdf is at least ATMEL_SMC_MODE_TDF_MIN
> >
> > Boris Brezillon (7):
> > mfd: syscon: atmel-smc: Add new helpers to ease SMC regs manipulation
> > memory: atmel-ebi: Simplify SMC config code
> > memory: atmel-ebi: Stop using reg_field objects for simple things
> > mfd: syscon: atmel-smc: Remove unused helpers/macros
> > memory: atmel-ebi: Change naming scheme
> > memory: atmel-ebi: Add missing ->numcs assignment
> > memory: atmel-ebi: Add PM ops
> >
> > drivers/memory/Kconfig | 1 +
> > drivers/memory/atmel-ebi.c | 584 ++++++++++++-----------------------
> > drivers/mfd/Kconfig | 4 +
> > drivers/mfd/Makefile | 1 +
> > drivers/mfd/atmel-smc.c | 314 +++++++++++++++++++
> > include/linux/mfd/syscon/atmel-smc.h | 237 ++++++--------
> > 6 files changed, 606 insertions(+), 535 deletions(-)
> > create mode 100644 drivers/mfd/atmel-smc.c
> >
>
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 0/7] memory: atmel-ebi: Add PM ops
2017-03-16 8:30 [PATCH 0/7] memory: atmel-ebi: Add PM ops Boris Brezillon
` (7 preceding siblings ...)
2017-03-27 9:25 ` [PATCH 0/7] " Nicolas Ferre
@ 2017-04-03 10:01 ` Lee Jones
8 siblings, 0 replies; 17+ messages in thread
From: Lee Jones @ 2017-04-03 10:01 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, 16 Mar 2017, Boris Brezillon wrote:
> Hello,
>
> This patchset adds a ->resume() hook to the EBI driver, but a few more
> changes were required in order to easily implement this PM hook.
>
> Patches 1 to 5 are just cleanup patches to simplify the EBI driver.
> Patch 6 is fixing a bug in the EBI driver. Note that this bug has no
> consequences until we start implementing the ->resume() hook.
> And finally, patch 7 is implementing ->resume() so that the SMC config
> is correctly restored when resuming the system.
>
> This patchset depends on [1] which is removing the unused pata_at91
> driver, which in turn prevents us from patching it before dropping
> the old SMC macro definitions in patch 4.
>
> Regards,
>
> Boris
>
> [1]http://lkml.iu.edu/hypermail/linux/kernel/1702.2/00990.html
>
> Changes since v1:
> - move helper functions in a C file
> - check if tdf is at least ATMEL_SMC_MODE_TDF_MIN
>
> Boris Brezillon (7):
> mfd: syscon: atmel-smc: Add new helpers to ease SMC regs manipulation
> memory: atmel-ebi: Simplify SMC config code
> memory: atmel-ebi: Stop using reg_field objects for simple things
> mfd: syscon: atmel-smc: Remove unused helpers/macros
> memory: atmel-ebi: Change naming scheme
> memory: atmel-ebi: Add missing ->numcs assignment
> memory: atmel-ebi: Add PM ops
>
> drivers/memory/Kconfig | 1 +
> drivers/memory/atmel-ebi.c | 584 ++++++++++++-----------------------
> drivers/mfd/Kconfig | 4 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/atmel-smc.c | 314 +++++++++++++++++++
> include/linux/mfd/syscon/atmel-smc.h | 237 ++++++--------
Applied all, thanks.
> 6 files changed, 606 insertions(+), 535 deletions(-)
> create mode 100644 drivers/mfd/atmel-smc.c
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 17+ messages in thread