[PATCH v3 0/3] drm/i915/lspcon: Fix resume time initialization

[PATCH v3 0/3] drm/i915/lspcon: Fix resume time initialization

[Imre Deak]

This is v3 of [1], this time with the correct upstream commit IDs for
real.

The patchset is to be applied to the v4.10 stable tree.

[1] https://www.spinics.net/lists/stable/msg163652.html

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.10

Imre Deak (3):
  drm/i915/lspcon: Enable AUX interrupts for resume time initialization
  drm/i915/gen9+: Enable hotplug detection early
  drm/i915/lspcon: Fix resume time initialization due to unasserted HPD

 drivers/gpu/drm/i915/i915_drv.c     |  5 ++-
 drivers/gpu/drm/i915/i915_irq.c     | 71 ++++++++++++++++++++++++++-----------
 drivers/gpu/drm/i915/intel_dp.c     |  4 +--
 drivers/gpu/drm/i915/intel_drv.h    |  2 ++
 drivers/gpu/drm/i915/intel_lspcon.c |  5 ++-
 5 files changed, 63 insertions(+), 24 deletions(-)

-- 
2.5.0

[PATCH v3 1/3] drm/i915/lspcon: Enable AUX interrupts for resume time initialization

[Imre Deak]

commit 908764f6d0bd1ba496cb8da33b9b98297ed27351 upstream.

For LSPCON initialization during system resume we need AUX
functionality, but we call the corresponding encoder reset hook with all
interrupts disabled. Without interrupts we'll do a poll-wait for AUX
transfer completions, which adds a significant delay if the transfers
timeout/need to be retried for some reason.

Fix this by enabling interrupts before calling the reset hooks. Note
that while this will enable AUX interrupts it will keep HPD interrupts
disabled, in a similar way to the init time output setup code.

This issue existed since LSPCON support was added.

v2:
- Rebased on drm-tip.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480448429-27739-1-git-send-email-imre.deak@intel.com
(rebased onto v4.10.4 due to missing s/dev/dev_priv/ upstream change)
(corrected stable tag)
Cc: <stable@vger.kernel.org> # v4.10
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 728ca3e..f02da12 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -1573,18 +1573,21 @@ static int i915_drm_resume(struct drm_device *dev)
 	intel_opregion_setup(dev_priv);
 
 	intel_init_pch_refclk(dev);
-	drm_mode_config_reset(dev);
 
 	/*
 	 * Interrupts have to be enabled before any batches are run. If not the
 	 * GPU will hang. i915_gem_init_hw() will initiate batches to
 	 * update/restore the context.
 	 *
+	 * drm_mode_config_reset() needs AUX interrupts.
+	 *
 	 * Modeset enabling in intel_modeset_init_hw() also needs working
 	 * interrupts.
 	 */
 	intel_runtime_pm_enable_interrupts(dev_priv);
 
+	drm_mode_config_reset(dev);
+
 	mutex_lock(&dev->struct_mutex);
 	if (i915_gem_init_hw(dev)) {
 		DRM_ERROR("failed to re-initialize GPU, declaring wedged!\n");
-- 
2.5.0

[PATCH v3 2/3] drm/i915/gen9+: Enable hotplug detection early

[Imre Deak]

commit 2a57d9cce1c08578097d965468e37f06d71fa495 upstream.

For LSPCON resume time initialization we need to sample the
corresponding pin's HPD level, but this is only available when HPD
detection is enabled. Currently we enable detection only when enabling
HPD interrupts which is too late, so bring the enabling of detection
earlier.

This is needed by the next patch.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1485509961-9010-2-git-send-email-imre.deak@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(rebased onto v4.10.4 due to missing s/IS_BROXTON/IS_GEN9_LP/ upstream change)
(corrected stable tag)
Cc: <stable@vger.kernel.org> # v4.10
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/i915_irq.c | 71 +++++++++++++++++++++++++++++------------
 1 file changed, 51 insertions(+), 20 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 07ca71c..f914581 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -3089,24 +3089,33 @@ static void ibx_hpd_irq_setup(struct drm_i915_private *dev_priv)
 	I915_WRITE(PCH_PORT_HOTPLUG, hotplug);
 }
 
+static void spt_hpd_detection_setup(struct drm_i915_private *dev_priv)
+{
+	u32 hotplug;
+
+	/* Enable digital hotplug on the PCH */
+	hotplug = I915_READ(PCH_PORT_HOTPLUG);
+	hotplug |= PORTA_HOTPLUG_ENABLE |
+		   PORTB_HOTPLUG_ENABLE |
+		   PORTC_HOTPLUG_ENABLE |
+		   PORTD_HOTPLUG_ENABLE;
+	I915_WRITE(PCH_PORT_HOTPLUG, hotplug);
+
+	hotplug = I915_READ(PCH_PORT_HOTPLUG2);
+	hotplug |= PORTE_HOTPLUG_ENABLE;
+	I915_WRITE(PCH_PORT_HOTPLUG2, hotplug);
+}
+
 static void spt_hpd_irq_setup(struct drm_i915_private *dev_priv)
 {
-	u32 hotplug_irqs, hotplug, enabled_irqs;
+	u32 hotplug_irqs, enabled_irqs;
 
 	hotplug_irqs = SDE_HOTPLUG_MASK_SPT;
 	enabled_irqs = intel_hpd_enabled_irqs(dev_priv, hpd_spt);
 
 	ibx_display_interrupt_update(dev_priv, hotplug_irqs, enabled_irqs);
 
-	/* Enable digital hotplug on the PCH */
-	hotplug = I915_READ(PCH_PORT_HOTPLUG);
-	hotplug |= PORTD_HOTPLUG_ENABLE | PORTC_HOTPLUG_ENABLE |
-		PORTB_HOTPLUG_ENABLE | PORTA_HOTPLUG_ENABLE;
-	I915_WRITE(PCH_PORT_HOTPLUG, hotplug);
-
-	hotplug = I915_READ(PCH_PORT_HOTPLUG2);
-	hotplug |= PORTE_HOTPLUG_ENABLE;
-	I915_WRITE(PCH_PORT_HOTPLUG2, hotplug);
+	spt_hpd_detection_setup(dev_priv);
 }
 
 static void ilk_hpd_irq_setup(struct drm_i915_private *dev_priv)
@@ -3143,18 +3152,15 @@ static void ilk_hpd_irq_setup(struct drm_i915_private *dev_priv)
 	ibx_hpd_irq_setup(dev_priv);
 }
 
-static void bxt_hpd_irq_setup(struct drm_i915_private *dev_priv)
+static void __bxt_hpd_detection_setup(struct drm_i915_private *dev_priv,
+				      u32 enabled_irqs)
 {
-	u32 hotplug_irqs, hotplug, enabled_irqs;
-
-	enabled_irqs = intel_hpd_enabled_irqs(dev_priv, hpd_bxt);
-	hotplug_irqs = BXT_DE_PORT_HOTPLUG_MASK;
-
-	bdw_update_port_irq(dev_priv, hotplug_irqs, enabled_irqs);
+	u32 hotplug;
 
 	hotplug = I915_READ(PCH_PORT_HOTPLUG);
-	hotplug |= PORTC_HOTPLUG_ENABLE | PORTB_HOTPLUG_ENABLE |
-		PORTA_HOTPLUG_ENABLE;
+	hotplug |= PORTA_HOTPLUG_ENABLE |
+		   PORTB_HOTPLUG_ENABLE |
+		   PORTC_HOTPLUG_ENABLE;
 
 	DRM_DEBUG_KMS("Invert bit setting: hp_ctl:%x hp_port:%x\n",
 		      hotplug, enabled_irqs);
@@ -3164,7 +3170,6 @@ static void bxt_hpd_irq_setup(struct drm_i915_private *dev_priv)
 	 * For BXT invert bit has to be set based on AOB design
 	 * for HPD detection logic, update it based on VBT fields.
 	 */
-
 	if ((enabled_irqs & BXT_DE_PORT_HP_DDIA) &&
 	    intel_bios_is_port_hpd_inverted(dev_priv, PORT_A))
 		hotplug |= BXT_DDIA_HPD_INVERT;
@@ -3178,6 +3183,23 @@ static void bxt_hpd_irq_setup(struct drm_i915_private *dev_priv)
 	I915_WRITE(PCH_PORT_HOTPLUG, hotplug);
 }
 
+static void bxt_hpd_detection_setup(struct drm_i915_private *dev_priv)
+{
+	__bxt_hpd_detection_setup(dev_priv, BXT_DE_PORT_HOTPLUG_MASK);
+}
+
+static void bxt_hpd_irq_setup(struct drm_i915_private *dev_priv)
+{
+	u32 hotplug_irqs, enabled_irqs;
+
+	enabled_irqs = intel_hpd_enabled_irqs(dev_priv, hpd_bxt);
+	hotplug_irqs = BXT_DE_PORT_HOTPLUG_MASK;
+
+	bdw_update_port_irq(dev_priv, hotplug_irqs, enabled_irqs);
+
+	__bxt_hpd_detection_setup(dev_priv, enabled_irqs);
+}
+
 static void ibx_irq_postinstall(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = to_i915(dev);
@@ -3193,6 +3215,12 @@ static void ibx_irq_postinstall(struct drm_device *dev)
 
 	gen5_assert_iir_is_zero(dev_priv, SDEIIR);
 	I915_WRITE(SDEIMR, ~mask);
+
+	if (HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv) ||
+	    HAS_PCH_LPT(dev_priv))
+		; /* TODO: Enable HPD detection on older PCH platforms too */
+	else
+		spt_hpd_detection_setup(dev_priv);
 }
 
 static void gen5_gt_irq_postinstall(struct drm_device *dev)
@@ -3404,6 +3432,9 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
 
 	GEN5_IRQ_INIT(GEN8_DE_PORT_, ~de_port_masked, de_port_enables);
 	GEN5_IRQ_INIT(GEN8_DE_MISC_, ~de_misc_masked, de_misc_masked);
+
+	if (IS_BROXTON(dev_priv))
+		bxt_hpd_detection_setup(dev_priv);
 }
 
 static int gen8_irq_postinstall(struct drm_device *dev)
-- 
2.5.0

[PATCH v3 3/3] drm/i915/lspcon: Fix resume time initialization due to unasserted HPD

[Imre Deak]

commit 4b84b4a5507913ee0da27b1f1b27671937839de6 upstream.

During system resume time initialization the HPD level on LSPCON ports
can stay low for an extended amount of time, leading to failed AUX
transfers and LSPCON initialization. Fix this by waiting for HPD to get
asserted.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99178
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1485509961-9010-3-git-send-email-imre.deak@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(corrected stable tag)
Cc: <stable@vger.kernel.org> # v4.10
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/intel_dp.c     | 4 ++--
 drivers/gpu/drm/i915/intel_drv.h    | 2 ++
 drivers/gpu/drm/i915/intel_lspcon.c | 5 ++++-
 3 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 4daf7dd..c3ab024 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -4289,8 +4289,8 @@ static bool bxt_digital_port_connected(struct drm_i915_private *dev_priv,
  *
  * Return %true if @port is connected, %false otherwise.
  */
-static bool intel_digital_port_connected(struct drm_i915_private *dev_priv,
-					 struct intel_digital_port *port)
+bool intel_digital_port_connected(struct drm_i915_private *dev_priv,
+				  struct intel_digital_port *port)
 {
 	if (HAS_PCH_IBX(dev_priv))
 		return ibx_digital_port_connected(dev_priv, port);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 03a2112..a0af54b 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1451,6 +1451,8 @@ bool intel_dp_read_dpcd(struct intel_dp *intel_dp);
 bool __intel_dp_read_desc(struct intel_dp *intel_dp,
 			  struct intel_dp_desc *desc);
 bool intel_dp_read_desc(struct intel_dp *intel_dp);
+bool intel_digital_port_connected(struct drm_i915_private *dev_priv,
+				  struct intel_digital_port *port);
 
 /* intel_dp_aux_backlight.c */
 int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector);
diff --git a/drivers/gpu/drm/i915/intel_lspcon.c b/drivers/gpu/drm/i915/intel_lspcon.c
index daa5234..1269561 100644
--- a/drivers/gpu/drm/i915/intel_lspcon.c
+++ b/drivers/gpu/drm/i915/intel_lspcon.c
@@ -100,6 +100,8 @@ static bool lspcon_probe(struct intel_lspcon *lspcon)
 static void lspcon_resume_in_pcon_wa(struct intel_lspcon *lspcon)
 {
 	struct intel_dp *intel_dp = lspcon_to_intel_dp(lspcon);
+	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+	struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
 	unsigned long start = jiffies;
 
 	if (!lspcon->desc_valid)
@@ -115,7 +117,8 @@ static void lspcon_resume_in_pcon_wa(struct intel_lspcon *lspcon)
 		if (!__intel_dp_read_desc(intel_dp, &desc))
 			return;
 
-		if (!memcmp(&intel_dp->desc, &desc, sizeof(desc))) {
+		if (intel_digital_port_connected(dev_priv, dig_port) &&
+		    !memcmp(&intel_dp->desc, &desc, sizeof(desc))) {
 			DRM_DEBUG_KMS("LSPCON recovering in PCON mode after %u ms\n",
 				      jiffies_to_msecs(jiffies - start));
 			return;
-- 
2.5.0

Re: [PATCH v3 0/3] drm/i915/lspcon: Fix resume time initialization

[Greg Kroah-Hartman]

On Mon, Mar 20, 2017 at 03:55:22PM +0200, Imre Deak wrote:
> This is v3 of [1], this time with the correct upstream commit IDs for
> real.
> 
> The patchset is to be applied to the v4.10 stable tree.

Thanks for the update, now all queued up.

greg k-h