From: <michael.hennerich@analog.com> To: <jic23@kernel.org>, <lars@metafoo.de>, <knaack.h@gmx.de>, <pmeerw@pmeerw.net>, <robh+dt@kernel.org>, <mark.rutland@arm.com> Cc: <linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, Michael Hennerich <michael.hennerich@analog.com> Subject: [PATCH] iio/adc/ltc2497: Driver for Linear Technology LTC2497 ADC Date: Thu, 23 Mar 2017 11:35:10 +0100 [thread overview] Message-ID: <1490265310-6162-1-git-send-email-michael.hennerich@analog.com> (raw) From: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> --- .../devicetree/bindings/iio/adc/ltc2497.txt | 13 + MAINTAINERS | 1 + drivers/iio/adc/Kconfig | 11 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/ltc2497.c | 263 +++++++++++++++++++++ 5 files changed, 289 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/ltc2497.txt create mode 100644 drivers/iio/adc/ltc2497.c diff --git a/Documentation/devicetree/bindings/iio/adc/ltc2497.txt b/Documentation/devicetree/bindings/iio/adc/ltc2497.txt new file mode 100644 index 0000000..c2829c19 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ltc2497.txt @@ -0,0 +1,13 @@ +* Linear Technology / Analog Devices LTC2497 ADC + +Required properties: + - compatible: Should be "lltc,ltc2497" + - reg: Should contain the ADC I2C address + - vref-supply: The regulator supply for ADC reference voltage + +Example: + ltc2497: adc@76 { + compatible = "lltc,ltc2497"; + reg = <0x76>; + vref-supply = <<c2497_reg>; + }; diff --git a/MAINTAINERS b/MAINTAINERS index a7d6f9a..173043c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -813,6 +813,7 @@ W: http://wiki.analog.com/ W: http://ez.analog.com/community/linux-device-drivers S: Supported F: drivers/iio/*/ad* +F: drivers/iio/adc/ltc2497* X: drivers/iio/*/adjd* F: drivers/staging/iio/*/ad* F: drivers/staging/iio/trigger/iio-trig-bfin-timer.c diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 2268a6f..141cf4a 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -326,6 +326,17 @@ config LTC2485 To compile this driver as a module, choose M here: the module will be called ltc2485. +config LTC2497 + tristate "Linear Technology LTC2497 ADC driver" + depends on I2C + help + Say yes here to build support for Linear Technology LTC2497 + 16-Bit 8-/16-Channel Delta Sigma ADC. + Provides direct access via sysfs + + To compile this driver as a module, choose M here: the module will be + called ltc2497. + config MAX1027 tristate "Maxim max1027 ADC driver" depends on SPI diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 73dbe39..9d626b5 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -32,6 +32,7 @@ obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o obj-$(CONFIG_LPC18XX_ADC) += lpc18xx_adc.o obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o obj-$(CONFIG_LTC2485) += ltc2485.o +obj-$(CONFIG_LTC2497) += ltc2497.o obj-$(CONFIG_MAX1027) += max1027.o obj-$(CONFIG_MAX11100) += max11100.o obj-$(CONFIG_MAX1363) += max1363.o diff --git a/drivers/iio/adc/ltc2497.c b/drivers/iio/adc/ltc2497.c new file mode 100644 index 0000000..0452715 --- /dev/null +++ b/drivers/iio/adc/ltc2497.c @@ -0,0 +1,263 @@ +/* + * ltc2497.c - Driver for Linear Technology LTC2497 ADC + * + * Copyright (C) 2017 Analog Devices Inc. + * + * Licensed under the GPL-2. + * + * Datasheet: http://cds.linear.com/docs/en/datasheet/2497fd.pdf + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/regulator/consumer.h> +#include <linux/of.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#define LTC2497_ENABLE 0xA0 +#define LTC2497_SGL (1 << 4) +#define LTC2497_DIFF (0 << 4) +#define LTC2497_SIGN (1 << 3) +#define LTC2497_CONFIG_DEFAULT LTC2497_ENABLE +#define LTC2497_CONVERSION_TIME_MS 150ULL + +struct ltc2497_st { + struct i2c_client *client; + struct regulator *ref; + ktime_t time_prev; + u8 addr_prev; +}; + +static int ltc2497_wait_conv(struct ltc2497_st *st) +{ + s64 time_elapsed; + + time_elapsed = ktime_ms_delta(ktime_get(), st->time_prev); + + if (time_elapsed < LTC2497_CONVERSION_TIME_MS) { + /* delay if conversion time not passed + * since last read or write + */ + msleep(LTC2497_CONVERSION_TIME_MS - time_elapsed); + return 0; + } + + if (time_elapsed - LTC2497_CONVERSION_TIME_MS <= 0) { + /* We're in automatic mode - + * so the last reading is stil not outdated + */ + return 0; + } + + return -ETIMEDOUT; +} + +static int ltc2497_read(struct ltc2497_st *st, u8 address, int *val) +{ + struct i2c_client *client = st->client; + __be32 buf = 0; + int ret; + + ret = ltc2497_wait_conv(st); + if (ret < 0 || st->addr_prev != address) { + ret = i2c_smbus_write_byte(st->client, 0xA0 | address); + if (ret < 0) + return ret; + st->addr_prev = address; + msleep(LTC2497_CONVERSION_TIME_MS); + } + ret = i2c_master_recv(client, (char *)&buf, 3); + if (ret < 0) { + dev_err(&client->dev, "i2c_master_recv failed\n"); + return ret; + } + st->time_prev = ktime_get(); + *val = (be32_to_cpu(buf) >> 14) - (1 << 17); + + return ret; +} + +static int ltc2497_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct ltc2497_st *st = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&indio_dev->mlock); + ret = ltc2497_read(st, chan->address, val); + mutex_unlock(&indio_dev->mlock); + if (ret < 0) + return ret; + + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + ret = regulator_get_voltage(st->ref); + if (ret < 0) + return ret; + + *val = ret / 1000; + *val2 = 17; + + return IIO_VAL_FRACTIONAL_LOG2; + + default: + return -EINVAL; + } +} + +#define LTC2497_CHAN(_chan, _addr) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = (_chan), \ + .address = (_addr | (_chan / 2) | ((_chan & 1) ? LTC2497_SIGN : 0)), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ +} + +#define LTC2497_CHAN_DIFF(_chan, _addr) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = (_chan) * 2 + ((_addr) & LTC2497_SIGN ? 1 : 0), \ + .channel2 = (_chan) * 2 + ((_addr) & LTC2497_SIGN ? 0 : 1),\ + .address = (_addr | _chan), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .differential = 1, \ +} + +static const struct iio_chan_spec ltc2497_channel[] = { + LTC2497_CHAN(0, LTC2497_SGL), + LTC2497_CHAN(1, LTC2497_SGL), + LTC2497_CHAN(2, LTC2497_SGL), + LTC2497_CHAN(3, LTC2497_SGL), + LTC2497_CHAN(4, LTC2497_SGL), + LTC2497_CHAN(5, LTC2497_SGL), + LTC2497_CHAN(6, LTC2497_SGL), + LTC2497_CHAN(7, LTC2497_SGL), + LTC2497_CHAN(8, LTC2497_SGL), + LTC2497_CHAN(9, LTC2497_SGL), + LTC2497_CHAN(10, LTC2497_SGL), + LTC2497_CHAN(11, LTC2497_SGL), + LTC2497_CHAN(12, LTC2497_SGL), + LTC2497_CHAN(13, LTC2497_SGL), + LTC2497_CHAN(14, LTC2497_SGL), + LTC2497_CHAN(15, LTC2497_SGL), + LTC2497_CHAN_DIFF(0, LTC2497_DIFF), + LTC2497_CHAN_DIFF(1, LTC2497_DIFF), + LTC2497_CHAN_DIFF(2, LTC2497_DIFF), + LTC2497_CHAN_DIFF(3, LTC2497_DIFF), + LTC2497_CHAN_DIFF(4, LTC2497_DIFF), + LTC2497_CHAN_DIFF(5, LTC2497_DIFF), + LTC2497_CHAN_DIFF(6, LTC2497_DIFF), + LTC2497_CHAN_DIFF(7, LTC2497_DIFF), + LTC2497_CHAN_DIFF(0, LTC2497_DIFF | LTC2497_SIGN), + LTC2497_CHAN_DIFF(1, LTC2497_DIFF | LTC2497_SIGN), + LTC2497_CHAN_DIFF(2, LTC2497_DIFF | LTC2497_SIGN), + LTC2497_CHAN_DIFF(3, LTC2497_DIFF | LTC2497_SIGN), + LTC2497_CHAN_DIFF(4, LTC2497_DIFF | LTC2497_SIGN), + LTC2497_CHAN_DIFF(5, LTC2497_DIFF | LTC2497_SIGN), + LTC2497_CHAN_DIFF(6, LTC2497_DIFF | LTC2497_SIGN), + LTC2497_CHAN_DIFF(7, LTC2497_DIFF | LTC2497_SIGN), +}; + +static const struct iio_info ltc2497_info = { + .read_raw = ltc2497_read_raw, + .driver_module = THIS_MODULE, +}; + +static int ltc2497_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct iio_dev *indio_dev; + struct ltc2497_st *st; + int ret; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | + I2C_FUNC_SMBUS_WRITE_BYTE)) + return -EOPNOTSUPP; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + st->client = client; + + indio_dev->dev.parent = &client->dev; + indio_dev->name = id->name; + indio_dev->info = <c2497_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = ltc2497_channel; + indio_dev->num_channels = ARRAY_SIZE(ltc2497_channel); + + st->ref = devm_regulator_get(&client->dev, "vref"); + if (IS_ERR(st->ref)) + return PTR_ERR(st->ref); + + ret = regulator_enable(st->ref); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte(st->client, LTC2497_CONFIG_DEFAULT); + if (ret < 0) + goto err_regulator_disable; + + st->addr_prev = LTC2497_CONFIG_DEFAULT; + st->time_prev = ktime_get(); + + ret = devm_iio_device_register(&client->dev, indio_dev); + if (ret < 0) + goto err_regulator_disable; + + return 0; + +err_regulator_disable: + regulator_disable(st->ref); + + return ret; +} + +static int ltc2497_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct ltc2497_st *st = iio_priv(indio_dev); + + regulator_disable(st->ref); + + return 0; +} + +static const struct i2c_device_id ltc2497_id[] = { + { "ltc2497", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ltc2497_id); + +static const struct of_device_id ltc2497_of_match[] = { + { .compatible = "lltc,ltc2497", }, + {}, +}; +MODULE_DEVICE_TABLE(of, ltc2497_of_match); + +static struct i2c_driver ltc2497_driver = { + .driver = { + .name = "ltc2497", + .of_match_table = of_match_ptr(ltc2497_of_match), + }, + .probe = ltc2497_probe, + .remove = ltc2497_remove, + .id_table = ltc2497_id, +}; +module_i2c_driver(ltc2497_driver); + +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); +MODULE_DESCRIPTION("Linear Technology LTC2497 ADC driver"); +MODULE_LICENSE("GPL v2"); -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: <michael.hennerich@analog.com> To: jic23@kernel.org, lars@metafoo.de, knaack.h@gmx.de, pmeerw@pmeerw.net, robh+dt@kernel.org, mark.rutland@arm.com Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Michael Hennerich <michael.hennerich@analog.com> Subject: [PATCH] iio/adc/ltc2497: Driver for Linear Technology LTC2497 ADC Date: Thu, 23 Mar 2017 11:35:10 +0100 [thread overview] Message-ID: <1490265310-6162-1-git-send-email-michael.hennerich@analog.com> (raw) From: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> --- .../devicetree/bindings/iio/adc/ltc2497.txt | 13 + MAINTAINERS | 1 + drivers/iio/adc/Kconfig | 11 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/ltc2497.c | 263 +++++++++++++++++++++ 5 files changed, 289 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/ltc2497.txt create mode 100644 drivers/iio/adc/ltc2497.c diff --git a/Documentation/devicetree/bindings/iio/adc/ltc2497.txt b/Documentation/devicetree/bindings/iio/adc/ltc2497.txt new file mode 100644 index 0000000..c2829c19 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ltc2497.txt @@ -0,0 +1,13 @@ +* Linear Technology / Analog Devices LTC2497 ADC + +Required properties: + - compatible: Should be "lltc,ltc2497" + - reg: Should contain the ADC I2C address + - vref-supply: The regulator supply for ADC reference voltage + +Example: + ltc2497: adc@76 { + compatible = "lltc,ltc2497"; + reg = <0x76>; + vref-supply = <<c2497_reg>; + }; diff --git a/MAINTAINERS b/MAINTAINERS index a7d6f9a..173043c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -813,6 +813,7 @@ W: http://wiki.analog.com/ W: http://ez.analog.com/community/linux-device-drivers S: Supported F: drivers/iio/*/ad* +F: drivers/iio/adc/ltc2497* X: drivers/iio/*/adjd* F: drivers/staging/iio/*/ad* F: drivers/staging/iio/trigger/iio-trig-bfin-timer.c diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 2268a6f..141cf4a 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -326,6 +326,17 @@ config LTC2485 To compile this driver as a module, choose M here: the module will be called ltc2485. +config LTC2497 + tristate "Linear Technology LTC2497 ADC driver" + depends on I2C + help + Say yes here to build support for Linear Technology LTC2497 + 16-Bit 8-/16-Channel Delta Sigma ADC. + Provides direct access via sysfs + + To compile this driver as a module, choose M here: the module will be + called ltc2497. + config MAX1027 tristate "Maxim max1027 ADC driver" depends on SPI diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 73dbe39..9d626b5 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -32,6 +32,7 @@ obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o obj-$(CONFIG_LPC18XX_ADC) += lpc18xx_adc.o obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o obj-$(CONFIG_LTC2485) += ltc2485.o +obj-$(CONFIG_LTC2497) += ltc2497.o obj-$(CONFIG_MAX1027) += max1027.o obj-$(CONFIG_MAX11100) += max11100.o obj-$(CONFIG_MAX1363) += max1363.o diff --git a/drivers/iio/adc/ltc2497.c b/drivers/iio/adc/ltc2497.c new file mode 100644 index 0000000..0452715 --- /dev/null +++ b/drivers/iio/adc/ltc2497.c @@ -0,0 +1,263 @@ +/* + * ltc2497.c - Driver for Linear Technology LTC2497 ADC + * + * Copyright (C) 2017 Analog Devices Inc. + * + * Licensed under the GPL-2. + * + * Datasheet: http://cds.linear.com/docs/en/datasheet/2497fd.pdf + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/regulator/consumer.h> +#include <linux/of.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#define LTC2497_ENABLE 0xA0 +#define LTC2497_SGL (1 << 4) +#define LTC2497_DIFF (0 << 4) +#define LTC2497_SIGN (1 << 3) +#define LTC2497_CONFIG_DEFAULT LTC2497_ENABLE +#define LTC2497_CONVERSION_TIME_MS 150ULL + +struct ltc2497_st { + struct i2c_client *client; + struct regulator *ref; + ktime_t time_prev; + u8 addr_prev; +}; + +static int ltc2497_wait_conv(struct ltc2497_st *st) +{ + s64 time_elapsed; + + time_elapsed = ktime_ms_delta(ktime_get(), st->time_prev); + + if (time_elapsed < LTC2497_CONVERSION_TIME_MS) { + /* delay if conversion time not passed + * since last read or write + */ + msleep(LTC2497_CONVERSION_TIME_MS - time_elapsed); + return 0; + } + + if (time_elapsed - LTC2497_CONVERSION_TIME_MS <= 0) { + /* We're in automatic mode - + * so the last reading is stil not outdated + */ + return 0; + } + + return -ETIMEDOUT; +} + +static int ltc2497_read(struct ltc2497_st *st, u8 address, int *val) +{ + struct i2c_client *client = st->client; + __be32 buf = 0; + int ret; + + ret = ltc2497_wait_conv(st); + if (ret < 0 || st->addr_prev != address) { + ret = i2c_smbus_write_byte(st->client, 0xA0 | address); + if (ret < 0) + return ret; + st->addr_prev = address; + msleep(LTC2497_CONVERSION_TIME_MS); + } + ret = i2c_master_recv(client, (char *)&buf, 3); + if (ret < 0) { + dev_err(&client->dev, "i2c_master_recv failed\n"); + return ret; + } + st->time_prev = ktime_get(); + *val = (be32_to_cpu(buf) >> 14) - (1 << 17); + + return ret; +} + +static int ltc2497_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct ltc2497_st *st = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&indio_dev->mlock); + ret = ltc2497_read(st, chan->address, val); + mutex_unlock(&indio_dev->mlock); + if (ret < 0) + return ret; + + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + ret = regulator_get_voltage(st->ref); + if (ret < 0) + return ret; + + *val = ret / 1000; + *val2 = 17; + + return IIO_VAL_FRACTIONAL_LOG2; + + default: + return -EINVAL; + } +} + +#define LTC2497_CHAN(_chan, _addr) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = (_chan), \ + .address = (_addr | (_chan / 2) | ((_chan & 1) ? LTC2497_SIGN : 0)), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ +} + +#define LTC2497_CHAN_DIFF(_chan, _addr) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = (_chan) * 2 + ((_addr) & LTC2497_SIGN ? 1 : 0), \ + .channel2 = (_chan) * 2 + ((_addr) & LTC2497_SIGN ? 0 : 1),\ + .address = (_addr | _chan), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .differential = 1, \ +} + +static const struct iio_chan_spec ltc2497_channel[] = { + LTC2497_CHAN(0, LTC2497_SGL), + LTC2497_CHAN(1, LTC2497_SGL), + LTC2497_CHAN(2, LTC2497_SGL), + LTC2497_CHAN(3, LTC2497_SGL), + LTC2497_CHAN(4, LTC2497_SGL), + LTC2497_CHAN(5, LTC2497_SGL), + LTC2497_CHAN(6, LTC2497_SGL), + LTC2497_CHAN(7, LTC2497_SGL), + LTC2497_CHAN(8, LTC2497_SGL), + LTC2497_CHAN(9, LTC2497_SGL), + LTC2497_CHAN(10, LTC2497_SGL), + LTC2497_CHAN(11, LTC2497_SGL), + LTC2497_CHAN(12, LTC2497_SGL), + LTC2497_CHAN(13, LTC2497_SGL), + LTC2497_CHAN(14, LTC2497_SGL), + LTC2497_CHAN(15, LTC2497_SGL), + LTC2497_CHAN_DIFF(0, LTC2497_DIFF), + LTC2497_CHAN_DIFF(1, LTC2497_DIFF), + LTC2497_CHAN_DIFF(2, LTC2497_DIFF), + LTC2497_CHAN_DIFF(3, LTC2497_DIFF), + LTC2497_CHAN_DIFF(4, LTC2497_DIFF), + LTC2497_CHAN_DIFF(5, LTC2497_DIFF), + LTC2497_CHAN_DIFF(6, LTC2497_DIFF), + LTC2497_CHAN_DIFF(7, LTC2497_DIFF), + LTC2497_CHAN_DIFF(0, LTC2497_DIFF | LTC2497_SIGN), + LTC2497_CHAN_DIFF(1, LTC2497_DIFF | LTC2497_SIGN), + LTC2497_CHAN_DIFF(2, LTC2497_DIFF | LTC2497_SIGN), + LTC2497_CHAN_DIFF(3, LTC2497_DIFF | LTC2497_SIGN), + LTC2497_CHAN_DIFF(4, LTC2497_DIFF | LTC2497_SIGN), + LTC2497_CHAN_DIFF(5, LTC2497_DIFF | LTC2497_SIGN), + LTC2497_CHAN_DIFF(6, LTC2497_DIFF | LTC2497_SIGN), + LTC2497_CHAN_DIFF(7, LTC2497_DIFF | LTC2497_SIGN), +}; + +static const struct iio_info ltc2497_info = { + .read_raw = ltc2497_read_raw, + .driver_module = THIS_MODULE, +}; + +static int ltc2497_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct iio_dev *indio_dev; + struct ltc2497_st *st; + int ret; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | + I2C_FUNC_SMBUS_WRITE_BYTE)) + return -EOPNOTSUPP; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + st->client = client; + + indio_dev->dev.parent = &client->dev; + indio_dev->name = id->name; + indio_dev->info = <c2497_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = ltc2497_channel; + indio_dev->num_channels = ARRAY_SIZE(ltc2497_channel); + + st->ref = devm_regulator_get(&client->dev, "vref"); + if (IS_ERR(st->ref)) + return PTR_ERR(st->ref); + + ret = regulator_enable(st->ref); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte(st->client, LTC2497_CONFIG_DEFAULT); + if (ret < 0) + goto err_regulator_disable; + + st->addr_prev = LTC2497_CONFIG_DEFAULT; + st->time_prev = ktime_get(); + + ret = devm_iio_device_register(&client->dev, indio_dev); + if (ret < 0) + goto err_regulator_disable; + + return 0; + +err_regulator_disable: + regulator_disable(st->ref); + + return ret; +} + +static int ltc2497_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct ltc2497_st *st = iio_priv(indio_dev); + + regulator_disable(st->ref); + + return 0; +} + +static const struct i2c_device_id ltc2497_id[] = { + { "ltc2497", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ltc2497_id); + +static const struct of_device_id ltc2497_of_match[] = { + { .compatible = "lltc,ltc2497", }, + {}, +}; +MODULE_DEVICE_TABLE(of, ltc2497_of_match); + +static struct i2c_driver ltc2497_driver = { + .driver = { + .name = "ltc2497", + .of_match_table = of_match_ptr(ltc2497_of_match), + }, + .probe = ltc2497_probe, + .remove = ltc2497_remove, + .id_table = ltc2497_id, +}; +module_i2c_driver(ltc2497_driver); + +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); +MODULE_DESCRIPTION("Linear Technology LTC2497 ADC driver"); +MODULE_LICENSE("GPL v2"); -- 2.7.4
next reply other threads:[~2017-03-23 10:34 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-03-23 10:35 michael.hennerich [this message] 2017-03-23 10:35 ` [PATCH] iio/adc/ltc2497: Driver for Linear Technology LTC2497 ADC michael.hennerich 2017-03-23 11:05 ` Lars-Peter Clausen 2017-03-23 11:05 ` Lars-Peter Clausen 2017-03-29 8:51 ` Michael Hennerich 2017-03-29 8:51 ` Michael Hennerich 2017-03-23 11:28 ` Peter Meerwald-Stadler 2017-03-23 11:28 ` Peter Meerwald-Stadler 2017-03-23 14:45 ` Michael Hennerich 2017-03-23 14:45 ` Michael Hennerich
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1490265310-6162-1-git-send-email-michael.hennerich@analog.com \ --to=michael.hennerich@analog.com \ --cc=devicetree@vger.kernel.org \ --cc=jic23@kernel.org \ --cc=knaack.h@gmx.de \ --cc=lars@metafoo.de \ --cc=linux-iio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=pmeerw@pmeerw.net \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.