From: Stefan Wahren <stefan.wahren@i2se.com> To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, "David S. Miller" <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Jiri Slaby <jslaby@suse.com>, Marcel Holtmann <marcel@holtmann.org>, Sebastian Reichel <sre@kernel.org>, netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org, Stefan Wahren <stefan.wahren@i2se.com> Subject: [PATCH RFC v4 06/10] net: qualcomm: make qca_common a separate kernel module Date: Mon, 27 Mar 2017 15:37:24 +0200 [thread overview] Message-ID: <1490621848-24828-7-git-send-email-stefan.wahren@i2se.com> (raw) In-Reply-To: <1490621848-24828-1-git-send-email-stefan.wahren@i2se.com> In order to share common functions between QCA7000 SPI and UART protocol driver the qca_common needs to be a separate kernel module. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> --- drivers/net/ethernet/qualcomm/Kconfig | 8 +++++++- drivers/net/ethernet/qualcomm/Makefile | 5 +++-- drivers/net/ethernet/qualcomm/qca_common.c | 10 ++++++++++ 3 files changed, 20 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/qualcomm/Kconfig b/drivers/net/ethernet/qualcomm/Kconfig index d7720bf..b4c369d 100644 --- a/drivers/net/ethernet/qualcomm/Kconfig +++ b/drivers/net/ethernet/qualcomm/Kconfig @@ -16,7 +16,13 @@ config NET_VENDOR_QUALCOMM if NET_VENDOR_QUALCOMM config QCA7000 - tristate "Qualcomm Atheros QCA7000 support" + tristate + help + This enables support for the Qualcomm Atheros QCA7000. + +config QCA7000_SPI + tristate "Qualcomm Atheros QCA7000 SPI support" + select QCA7000 depends on SPI_MASTER && OF ---help--- This SPI protocol driver supports the Qualcomm Atheros QCA7000. diff --git a/drivers/net/ethernet/qualcomm/Makefile b/drivers/net/ethernet/qualcomm/Makefile index 8080570..00d8729 100644 --- a/drivers/net/ethernet/qualcomm/Makefile +++ b/drivers/net/ethernet/qualcomm/Makefile @@ -2,7 +2,8 @@ # Makefile for the Qualcomm network device drivers. # -obj-$(CONFIG_QCA7000) += qcaspi.o -qcaspi-objs := qca_spi.o qca_common.o qca_7k.o qca_debug.o +obj-$(CONFIG_QCA7000) += qca_common.o +obj-$(CONFIG_QCA7000_SPI) += qcaspi.o +qcaspi-objs := qca_7k.o qca_debug.o qca_spi.o obj-y += emac/ diff --git a/drivers/net/ethernet/qualcomm/qca_common.c b/drivers/net/ethernet/qualcomm/qca_common.c index d930524..f2c9e76 100644 --- a/drivers/net/ethernet/qualcomm/qca_common.c +++ b/drivers/net/ethernet/qualcomm/qca_common.c @@ -21,7 +21,9 @@ * by an atheros frame while transmitted over a serial channel; */ +#include <linux/init.h> #include <linux/kernel.h> +#include <linux/module.h> #include "qca_common.h" @@ -46,6 +48,7 @@ qcafrm_create_header(u8 *buf, u16 length) return QCAFRM_HEADER_LEN; } +EXPORT_SYMBOL_GPL(qcafrm_create_header); u16 qcafrm_create_footer(u8 *buf) @@ -57,6 +60,7 @@ qcafrm_create_footer(u8 *buf) buf[1] = 0x55; return QCAFRM_FOOTER_LEN; } +EXPORT_SYMBOL_GPL(qcafrm_create_footer); /* Gather received bytes and try to extract a full ethernet frame by * following a simple state machine. @@ -154,3 +158,9 @@ qcafrm_fsm_decode(struct qcafrm_handle *handle, u8 *buf, u16 buf_len, u8 recv_by return ret; } +EXPORT_SYMBOL_GPL(qcafrm_fsm_decode); + +MODULE_DESCRIPTION("Qualcomm Atheros Common"); +MODULE_AUTHOR("Qualcomm Atheros Communications"); +MODULE_AUTHOR("Stefan Wahren <stefan.wahren@i2se.com>"); +MODULE_LICENSE("Dual BSD/GPL"); -- 2.1.4
WARNING: multiple messages have this Message-ID (diff)
From: Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org> To: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>, Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>, "David S. Miller" <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org> Cc: Greg Kroah-Hartman <gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>, Jiri Slaby <jslaby-IBi9RG/b67k@public.gmane.org>, Marcel Holtmann <marcel-kz+m5ild9QBg9hUCZPvPmw@public.gmane.org>, Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>, netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org> Subject: [PATCH RFC v4 06/10] net: qualcomm: make qca_common a separate kernel module Date: Mon, 27 Mar 2017 15:37:24 +0200 [thread overview] Message-ID: <1490621848-24828-7-git-send-email-stefan.wahren@i2se.com> (raw) In-Reply-To: <1490621848-24828-1-git-send-email-stefan.wahren-eS4NqCHxEME@public.gmane.org> In order to share common functions between QCA7000 SPI and UART protocol driver the qca_common needs to be a separate kernel module. Signed-off-by: Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org> --- drivers/net/ethernet/qualcomm/Kconfig | 8 +++++++- drivers/net/ethernet/qualcomm/Makefile | 5 +++-- drivers/net/ethernet/qualcomm/qca_common.c | 10 ++++++++++ 3 files changed, 20 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/qualcomm/Kconfig b/drivers/net/ethernet/qualcomm/Kconfig index d7720bf..b4c369d 100644 --- a/drivers/net/ethernet/qualcomm/Kconfig +++ b/drivers/net/ethernet/qualcomm/Kconfig @@ -16,7 +16,13 @@ config NET_VENDOR_QUALCOMM if NET_VENDOR_QUALCOMM config QCA7000 - tristate "Qualcomm Atheros QCA7000 support" + tristate + help + This enables support for the Qualcomm Atheros QCA7000. + +config QCA7000_SPI + tristate "Qualcomm Atheros QCA7000 SPI support" + select QCA7000 depends on SPI_MASTER && OF ---help--- This SPI protocol driver supports the Qualcomm Atheros QCA7000. diff --git a/drivers/net/ethernet/qualcomm/Makefile b/drivers/net/ethernet/qualcomm/Makefile index 8080570..00d8729 100644 --- a/drivers/net/ethernet/qualcomm/Makefile +++ b/drivers/net/ethernet/qualcomm/Makefile @@ -2,7 +2,8 @@ # Makefile for the Qualcomm network device drivers. # -obj-$(CONFIG_QCA7000) += qcaspi.o -qcaspi-objs := qca_spi.o qca_common.o qca_7k.o qca_debug.o +obj-$(CONFIG_QCA7000) += qca_common.o +obj-$(CONFIG_QCA7000_SPI) += qcaspi.o +qcaspi-objs := qca_7k.o qca_debug.o qca_spi.o obj-y += emac/ diff --git a/drivers/net/ethernet/qualcomm/qca_common.c b/drivers/net/ethernet/qualcomm/qca_common.c index d930524..f2c9e76 100644 --- a/drivers/net/ethernet/qualcomm/qca_common.c +++ b/drivers/net/ethernet/qualcomm/qca_common.c @@ -21,7 +21,9 @@ * by an atheros frame while transmitted over a serial channel; */ +#include <linux/init.h> #include <linux/kernel.h> +#include <linux/module.h> #include "qca_common.h" @@ -46,6 +48,7 @@ qcafrm_create_header(u8 *buf, u16 length) return QCAFRM_HEADER_LEN; } +EXPORT_SYMBOL_GPL(qcafrm_create_header); u16 qcafrm_create_footer(u8 *buf) @@ -57,6 +60,7 @@ qcafrm_create_footer(u8 *buf) buf[1] = 0x55; return QCAFRM_FOOTER_LEN; } +EXPORT_SYMBOL_GPL(qcafrm_create_footer); /* Gather received bytes and try to extract a full ethernet frame by * following a simple state machine. @@ -154,3 +158,9 @@ qcafrm_fsm_decode(struct qcafrm_handle *handle, u8 *buf, u16 buf_len, u8 recv_by return ret; } +EXPORT_SYMBOL_GPL(qcafrm_fsm_decode); + +MODULE_DESCRIPTION("Qualcomm Atheros Common"); +MODULE_AUTHOR("Qualcomm Atheros Communications"); +MODULE_AUTHOR("Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org>"); +MODULE_LICENSE("Dual BSD/GPL"); -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-03-27 13:38 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-03-27 13:37 [PATCH RFC v4 00/10] net: qualcomm: add QCA7000 UART driver Stefan Wahren 2017-03-27 13:37 ` [PATCH RFC v4 01/10] net: qualcomm: remove unnecessary includes Stefan Wahren 2017-03-27 13:37 ` Stefan Wahren 2017-03-27 13:37 ` [PATCH RFC v4 02/10] net: qca_debug: use net_device_ops instead of direct call Stefan Wahren 2017-03-27 13:37 ` [PATCH RFC v4 03/10] net: qualcomm: move qcaspi_tx_cmd to qca_spi.c Stefan Wahren 2017-03-27 13:37 ` [PATCH RFC v4 04/10] net: qualcomm: rename qca_framing.c to qca_common.c Stefan Wahren 2017-03-27 13:37 ` [PATCH RFC v4 05/10] net: qualcomm: prepare frame decoding for UART driver Stefan Wahren 2017-03-27 13:37 ` Stefan Wahren 2017-03-27 13:37 ` Stefan Wahren [this message] 2017-03-27 13:37 ` [PATCH RFC v4 06/10] net: qualcomm: make qca_common a separate kernel module Stefan Wahren 2017-03-27 15:44 ` Dan Williams 2017-03-28 16:24 ` Stefan Wahren 2017-03-28 17:18 ` Dan Williams 2017-03-27 13:37 ` [PATCH RFC v4 07/10] dt-bindings: net: add binding for QCA7000 UART Stefan Wahren 2017-03-27 20:30 ` Rob Herring 2017-03-27 20:30 ` Rob Herring 2017-03-28 16:18 ` Stefan Wahren 2017-03-28 16:18 ` Stefan Wahren 2017-04-03 13:23 ` Rob Herring 2017-04-03 13:23 ` Rob Herring 2017-03-27 13:37 ` [PATCH RFC v4 08/10] net: qualcomm: add QCA7000 UART driver Stefan Wahren 2017-03-27 13:37 ` [PATCH RFC v4 09/10] tty: serdev-ttyport: return actual baudrate from ttyport_set_baudrate Stefan Wahren 2017-03-27 19:50 ` Rob Herring 2017-03-27 13:37 ` [PATCH RFC v4 10/10] tty: serdev: add functions to retrieve common UART settings Stefan Wahren 2017-03-27 20:00 ` Rob Herring 2017-03-28 16:33 ` Stefan Wahren
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1490621848-24828-7-git-send-email-stefan.wahren@i2se.com \ --to=stefan.wahren@i2se.com \ --cc=davem@davemloft.net \ --cc=devicetree@vger.kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=jslaby@suse.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-serial@vger.kernel.org \ --cc=marcel@holtmann.org \ --cc=mark.rutland@arm.com \ --cc=netdev@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=sre@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.