All of lore.kernel.org
 help / color / mirror / Atom feed
From: Steve Longerbeam <slongerbeam@gmail.com>
To: robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org,
	kernel@pengutronix.de, fabio.estevam@nxp.com,
	linux@armlinux.org.uk, mchehab@kernel.org, hverkuil@xs4all.nl,
	nick@shmanahar.org, markus.heiser@darmarIT.de,
	p.zabel@pengutronix.de,
	laurent.pinchart+renesas@ideasonboard.com, bparrot@ti.com,
	geert@linux-m68k.org, arnd@arndb.de, sudipm.mukherjee@gmail.com,
	minghsiu.tsai@mediatek.com, tiffany.lin@mediatek.com,
	jean-christophe.trotin@st.com, horms+renesas@verge.net.au,
	niklas.soderlund+renesas@ragnatech.se, robert.jarzmik@free.fr,
	songjun.wu@microchip.com, andrew-ct.chen@mediatek.com,
	gregkh@linuxfoundation.org, shuah@kernel.org,
	sakari.ailus@linux.intel.com, pavel@ucw.cz
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-media@vger.kernel.org, devel@driverdev.osuosl.org,
	Steve Longerbeam <steve_longerbeam@mentor.com>
Subject: [PATCH v6 21/39] media: imx: Add CSI subdev driver
Date: Mon, 27 Mar 2017 17:40:38 -0700	[thread overview]
Message-ID: <1490661656-10318-22-git-send-email-steve_longerbeam@mentor.com> (raw)
In-Reply-To: <1490661656-10318-1-git-send-email-steve_longerbeam@mentor.com>

This is a media entity subdevice for the i.MX Camera
Sensor Interface module.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
---
 drivers/staging/media/imx/Kconfig         |   14 +
 drivers/staging/media/imx/Makefile        |    2 +
 drivers/staging/media/imx/imx-media-csi.c | 1318 +++++++++++++++++++++++++++++
 3 files changed, 1334 insertions(+)
 create mode 100644 drivers/staging/media/imx/imx-media-csi.c

diff --git a/drivers/staging/media/imx/Kconfig b/drivers/staging/media/imx/Kconfig
index 62a3c34..e27ad6d 100644
--- a/drivers/staging/media/imx/Kconfig
+++ b/drivers/staging/media/imx/Kconfig
@@ -4,3 +4,17 @@ config VIDEO_IMX_MEDIA
 	---help---
 	  Say yes here to enable support for video4linux media controller
 	  driver for the i.MX5/6 SOC.
+
+if VIDEO_IMX_MEDIA
+menu "i.MX5/6 Media Sub devices"
+
+config VIDEO_IMX_CSI
+	tristate "i.MX5/6 Camera Sensor Interface driver"
+	depends on VIDEO_IMX_MEDIA && VIDEO_DEV && I2C
+	select VIDEOBUF2_DMA_CONTIG
+	default y
+	---help---
+	  A video4linux camera sensor interface driver for i.MX5/6.
+
+endmenu
+endif
diff --git a/drivers/staging/media/imx/Makefile b/drivers/staging/media/imx/Makefile
index 4606a3a..c054490 100644
--- a/drivers/staging/media/imx/Makefile
+++ b/drivers/staging/media/imx/Makefile
@@ -4,3 +4,5 @@ imx-media-common-objs := imx-media-utils.o imx-media-fim.o
 obj-$(CONFIG_VIDEO_IMX_MEDIA) += imx-media.o
 obj-$(CONFIG_VIDEO_IMX_MEDIA) += imx-media-common.o
 obj-$(CONFIG_VIDEO_IMX_MEDIA) += imx-media-capture.o
+
+obj-$(CONFIG_VIDEO_IMX_CSI) += imx-media-csi.o
diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
new file mode 100644
index 0000000..9e2a73c
--- /dev/null
+++ b/drivers/staging/media/imx/imx-media-csi.c
@@ -0,0 +1,1318 @@
+/*
+ * V4L2 Capture CSI Subdev for Freescale i.MX5/6 SOC
+ *
+ * Copyright (c) 2014-2016 Mentor Graphics Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-mc.h>
+#include <media/v4l2-of.h>
+#include <media/v4l2-subdev.h>
+#include <media/videobuf2-dma-contig.h>
+#include <video/imx-ipu-v3.h>
+#include <media/imx.h>
+#include "imx-media.h"
+
+/*
+ * Min/Max supported width and heights.
+ *
+ * We allow planar output, so we have to align width by 16 pixels
+ * to meet IDMAC alignment requirements.
+ *
+ * TODO: move this into pad format negotiation, if capture device
+ * has not requested planar formats, we should allow 8 pixel
+ * alignment.
+ */
+#define MIN_W       176
+#define MIN_H       144
+#define MAX_W      4096
+#define MAX_H      4096
+#define W_ALIGN    4 /* multiple of 16 pixels */
+#define H_ALIGN    1 /* multiple of 2 lines */
+#define S_ALIGN    1 /* multiple of 2 */
+
+struct csi_priv {
+	struct device *dev;
+	struct ipu_soc *ipu;
+	struct imx_media_dev *md;
+	struct v4l2_subdev sd;
+	struct media_pad pad[CSI_NUM_PADS];
+	/* the video device at IDMAC output pad */
+	struct imx_media_video_dev *vdev;
+	struct imx_media_fim *fim;
+	int csi_id;
+	int smfc_id;
+
+	/* lock to protect all members below */
+	struct mutex lock;
+
+	int active_output_pad;
+
+	struct ipuv3_channel *idmac_ch;
+	struct ipu_smfc *smfc;
+	struct ipu_csi *csi;
+
+	struct v4l2_mbus_framefmt format_mbus[CSI_NUM_PADS];
+	const struct imx_media_pixfmt *cc[CSI_NUM_PADS];
+	struct v4l2_rect crop;
+
+	/* active vb2 buffers to send to video dev sink */
+	struct imx_media_buffer *active_vb2_buf[2];
+	struct imx_media_dma_buf underrun_buf;
+
+	int ipu_buf_num;  /* ipu double buffer index: 0-1 */
+
+	/* the sink for the captured frames */
+	struct media_entity *sink;
+	enum ipu_csi_dest dest;
+	/* the source subdev */
+	struct v4l2_subdev *src_sd;
+
+	/* the mipi virtual channel number at link validate */
+	int vc_num;
+
+	/* the attached sensor at stream on */
+	struct imx_media_subdev *sensor;
+
+	spinlock_t irqlock; /* protect eof_irq handler */
+	struct timer_list eof_timeout_timer;
+	int eof_irq;
+	int nfb4eof_irq;
+
+	struct v4l2_ctrl_handler ctrl_hdlr;
+
+	int power_count; /* power counter */
+	bool stream_on;  /* streaming is on */
+	bool last_eof;   /* waiting for last EOF at stream off */
+	bool nfb4eof;    /* NFB4EOF encountered during streaming */
+	struct completion last_eof_comp;
+};
+
+static inline struct csi_priv *sd_to_dev(struct v4l2_subdev *sdev)
+{
+	return container_of(sdev, struct csi_priv, sd);
+}
+
+static void csi_idmac_put_ipu_resources(struct csi_priv *priv)
+{
+	if (!IS_ERR_OR_NULL(priv->idmac_ch))
+		ipu_idmac_put(priv->idmac_ch);
+	priv->idmac_ch = NULL;
+
+	if (!IS_ERR_OR_NULL(priv->smfc))
+		ipu_smfc_put(priv->smfc);
+	priv->smfc = NULL;
+}
+
+static int csi_idmac_get_ipu_resources(struct csi_priv *priv)
+{
+	int ch_num, ret;
+
+	ch_num = IPUV3_CHANNEL_CSI0 + priv->smfc_id;
+
+	priv->smfc = ipu_smfc_get(priv->ipu, ch_num);
+	if (IS_ERR(priv->smfc)) {
+		v4l2_err(&priv->sd, "failed to get SMFC\n");
+		ret = PTR_ERR(priv->smfc);
+		goto out;
+	}
+
+	priv->idmac_ch = ipu_idmac_get(priv->ipu, ch_num);
+	if (IS_ERR(priv->idmac_ch)) {
+		v4l2_err(&priv->sd, "could not get IDMAC channel %u\n",
+			 ch_num);
+		ret = PTR_ERR(priv->idmac_ch);
+		goto out;
+	}
+
+	return 0;
+out:
+	csi_idmac_put_ipu_resources(priv);
+	return ret;
+}
+
+static void csi_vb2_buf_done(struct csi_priv *priv)
+{
+	struct imx_media_video_dev *vdev = priv->vdev;
+	struct imx_media_buffer *done, *next;
+	struct vb2_buffer *vb;
+	dma_addr_t phys;
+
+	done = priv->active_vb2_buf[priv->ipu_buf_num];
+	if (done) {
+		vb = &done->vbuf.vb2_buf;
+		vb->timestamp = ktime_get_ns();
+		vb2_buffer_done(vb, priv->nfb4eof ?
+				VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
+	}
+
+	priv->nfb4eof = false;
+
+	/* get next queued buffer */
+	next = imx_media_capture_device_next_buf(vdev);
+	if (next) {
+		phys = vb2_dma_contig_plane_dma_addr(&next->vbuf.vb2_buf, 0);
+		priv->active_vb2_buf[priv->ipu_buf_num] = next;
+	} else {
+		phys = priv->underrun_buf.phys;
+		priv->active_vb2_buf[priv->ipu_buf_num] = NULL;
+	}
+
+	if (ipu_idmac_buffer_is_ready(priv->idmac_ch, priv->ipu_buf_num))
+		ipu_idmac_clear_buffer(priv->idmac_ch, priv->ipu_buf_num);
+
+	ipu_cpmem_set_buffer(priv->idmac_ch, priv->ipu_buf_num, phys);
+}
+
+static void csi_call_fim(struct csi_priv *priv)
+{
+	if (priv->fim) {
+		struct timespec cur_ts;
+
+		ktime_get_ts(&cur_ts);
+		/* call frame interval monitor */
+		imx_media_fim_eof_monitor(priv->fim, &cur_ts);
+	}
+}
+
+static irqreturn_t csi_idmac_eof_interrupt(int irq, void *dev_id)
+{
+	struct csi_priv *priv = dev_id;
+
+	spin_lock(&priv->irqlock);
+
+	if (priv->last_eof) {
+		complete(&priv->last_eof_comp);
+		priv->last_eof = false;
+		goto unlock;
+	}
+
+	csi_call_fim(priv);
+
+	csi_vb2_buf_done(priv);
+
+	/* select new IPU buf */
+	ipu_idmac_select_buffer(priv->idmac_ch, priv->ipu_buf_num);
+	/* toggle IPU double-buffer index */
+	priv->ipu_buf_num ^= 1;
+
+	/* bump the EOF timeout timer */
+	mod_timer(&priv->eof_timeout_timer,
+		  jiffies + msecs_to_jiffies(IMX_MEDIA_EOF_TIMEOUT));
+
+unlock:
+	spin_unlock(&priv->irqlock);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t csi_idmac_nfb4eof_interrupt(int irq, void *dev_id)
+{
+	struct csi_priv *priv = dev_id;
+
+	spin_lock(&priv->irqlock);
+
+	/*
+	 * this is not an unrecoverable error, just mark
+	 * the next captured frame with vb2 error flag.
+	 */
+	priv->nfb4eof = true;
+
+	v4l2_err(&priv->sd, "NFB4EOF\n");
+
+	spin_unlock(&priv->irqlock);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * EOF timeout timer function. This is an unrecoverable condition
+ * without a stream restart.
+ */
+static void csi_idmac_eof_timeout(unsigned long data)
+{
+	struct csi_priv *priv = (struct csi_priv *)data;
+	struct imx_media_video_dev *vdev = priv->vdev;
+
+	v4l2_err(&priv->sd, "EOF timeout\n");
+
+	/* signal a fatal error to capture device */
+	imx_media_capture_device_error(vdev);
+}
+
+static void csi_idmac_setup_vb2_buf(struct csi_priv *priv, dma_addr_t *phys)
+{
+	struct imx_media_video_dev *vdev = priv->vdev;
+	struct imx_media_buffer *buf;
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		buf = imx_media_capture_device_next_buf(vdev);
+		priv->active_vb2_buf[i] = buf;
+		phys[i] = vb2_dma_contig_plane_dma_addr(&buf->vbuf.vb2_buf, 0);
+	}
+}
+
+static void csi_idmac_unsetup_vb2_buf(struct csi_priv *priv,
+				      enum vb2_buffer_state return_status)
+{
+	struct imx_media_buffer *buf;
+	int i;
+
+	/* return any remaining active frames with return_status */
+	for (i = 0; i < 2; i++) {
+		buf = priv->active_vb2_buf[i];
+		if (buf) {
+			struct vb2_buffer *vb = &buf->vbuf.vb2_buf;
+
+			vb->timestamp = ktime_get_ns();
+			vb2_buffer_done(vb, return_status);
+		}
+	}
+}
+
+/* init the SMFC IDMAC channel */
+static int csi_idmac_setup_channel(struct csi_priv *priv)
+{
+	struct imx_media_video_dev *vdev = priv->vdev;
+	struct v4l2_of_endpoint *sensor_ep;
+	struct v4l2_mbus_framefmt *infmt;
+	unsigned int burst_size;
+	struct ipu_image image;
+	dma_addr_t phys[2];
+	bool passthrough;
+	int ret;
+
+	infmt = &priv->format_mbus[CSI_SINK_PAD];
+	sensor_ep = &priv->sensor->sensor_ep;
+
+	ipu_cpmem_zero(priv->idmac_ch);
+
+	memset(&image, 0, sizeof(image));
+	image.pix = vdev->fmt.fmt.pix;
+	image.rect.width = image.pix.width;
+	image.rect.height = image.pix.height;
+
+	csi_idmac_setup_vb2_buf(priv, phys);
+
+	image.phys0 = phys[0];
+	image.phys1 = phys[1];
+
+	ret = ipu_cpmem_set_image(priv->idmac_ch, &image);
+	if (ret)
+		goto unsetup_vb2;
+
+	burst_size = (image.pix.width & 0xf) ? 8 : 16;
+
+	ipu_cpmem_set_burstsize(priv->idmac_ch, burst_size);
+
+	/*
+	 * If the sensor uses 16-bit parallel CSI bus, we must handle
+	 * the data internally in the IPU as 16-bit generic, aka
+	 * passthrough mode.
+	 */
+	passthrough = (sensor_ep->bus_type != V4L2_MBUS_CSI2 &&
+		       sensor_ep->bus.parallel.bus_width >= 16);
+
+	if (passthrough)
+		ipu_cpmem_set_format_passthrough(priv->idmac_ch, 16);
+
+	/*
+	 * Set the channel for the direct CSI-->memory via SMFC
+	 * use-case to very high priority, by enabling the watermark
+	 * signal in the SMFC, enabling WM in the channel, and setting
+	 * the channel priority to high.
+	 *
+	 * Refer to the i.mx6 rev. D TRM Table 36-8: Calculated priority
+	 * value.
+	 *
+	 * The WM's are set very low by intention here to ensure that
+	 * the SMFC FIFOs do not overflow.
+	 */
+	ipu_smfc_set_watermark(priv->smfc, 0x02, 0x01);
+	ipu_cpmem_set_high_priority(priv->idmac_ch);
+	ipu_idmac_enable_watermark(priv->idmac_ch, true);
+	ipu_cpmem_set_axi_id(priv->idmac_ch, 0);
+	ipu_idmac_lock_enable(priv->idmac_ch, 8);
+
+	burst_size = ipu_cpmem_get_burstsize(priv->idmac_ch);
+	burst_size = passthrough ?
+		(burst_size >> 3) - 1 : (burst_size >> 2) - 1;
+
+	ipu_smfc_set_burstsize(priv->smfc, burst_size);
+
+	if (image.pix.field == V4L2_FIELD_NONE &&
+	    V4L2_FIELD_HAS_BOTH(infmt->field))
+		ipu_cpmem_interlaced_scan(priv->idmac_ch,
+					  image.pix.bytesperline);
+
+	ipu_idmac_set_double_buffer(priv->idmac_ch, true);
+
+	return 0;
+
+unsetup_vb2:
+	csi_idmac_unsetup_vb2_buf(priv, VB2_BUF_STATE_QUEUED);
+	return ret;
+}
+
+static void csi_idmac_unsetup(struct csi_priv *priv,
+			      enum vb2_buffer_state state)
+{
+	ipu_idmac_disable_channel(priv->idmac_ch);
+	ipu_smfc_disable(priv->smfc);
+
+	csi_idmac_unsetup_vb2_buf(priv, state);
+}
+
+static int csi_idmac_setup(struct csi_priv *priv)
+{
+	int ret;
+
+	ret = csi_idmac_setup_channel(priv);
+	if (ret)
+		return ret;
+
+	ipu_cpmem_dump(priv->idmac_ch);
+	ipu_dump(priv->ipu);
+
+	ipu_smfc_enable(priv->smfc);
+
+	/* set buffers ready */
+	ipu_idmac_select_buffer(priv->idmac_ch, 0);
+	ipu_idmac_select_buffer(priv->idmac_ch, 1);
+
+	/* enable the channels */
+	ipu_idmac_enable_channel(priv->idmac_ch);
+
+	return 0;
+}
+
+static int csi_idmac_start(struct csi_priv *priv)
+{
+	struct imx_media_video_dev *vdev = priv->vdev;
+	struct v4l2_pix_format *outfmt;
+	int ret;
+
+	ret = csi_idmac_get_ipu_resources(priv);
+	if (ret)
+		return ret;
+
+	ipu_smfc_map_channel(priv->smfc, priv->csi_id, priv->vc_num);
+
+	outfmt = &vdev->fmt.fmt.pix;
+
+	ret = imx_media_alloc_dma_buf(priv->md, &priv->underrun_buf,
+				      outfmt->sizeimage);
+	if (ret)
+		goto out_put_ipu;
+
+	priv->ipu_buf_num = 0;
+
+	/* init EOF completion waitq */
+	init_completion(&priv->last_eof_comp);
+	priv->last_eof = false;
+	priv->nfb4eof = false;
+
+	ret = csi_idmac_setup(priv);
+	if (ret) {
+		v4l2_err(&priv->sd, "csi_idmac_setup failed: %d\n", ret);
+		goto out_free_dma_buf;
+	}
+
+	priv->nfb4eof_irq = ipu_idmac_channel_irq(priv->ipu,
+						 priv->idmac_ch,
+						 IPU_IRQ_NFB4EOF);
+	ret = devm_request_irq(priv->dev, priv->nfb4eof_irq,
+			       csi_idmac_nfb4eof_interrupt, 0,
+			       "imx-smfc-nfb4eof", priv);
+	if (ret) {
+		v4l2_err(&priv->sd,
+			 "Error registering NFB4EOF irq: %d\n", ret);
+		goto out_unsetup;
+	}
+
+	priv->eof_irq = ipu_idmac_channel_irq(priv->ipu, priv->idmac_ch,
+					      IPU_IRQ_EOF);
+
+	ret = devm_request_irq(priv->dev, priv->eof_irq,
+			       csi_idmac_eof_interrupt, 0,
+			       "imx-smfc-eof", priv);
+	if (ret) {
+		v4l2_err(&priv->sd,
+			 "Error registering eof irq: %d\n", ret);
+		goto out_free_nfb4eof_irq;
+	}
+
+	/* start the EOF timeout timer */
+	mod_timer(&priv->eof_timeout_timer,
+		  jiffies + msecs_to_jiffies(IMX_MEDIA_EOF_TIMEOUT));
+
+	return 0;
+
+out_free_nfb4eof_irq:
+	devm_free_irq(priv->dev, priv->nfb4eof_irq, priv);
+out_unsetup:
+	csi_idmac_unsetup(priv, VB2_BUF_STATE_QUEUED);
+out_free_dma_buf:
+	imx_media_free_dma_buf(priv->md, &priv->underrun_buf);
+out_put_ipu:
+	csi_idmac_put_ipu_resources(priv);
+	return ret;
+}
+
+static void csi_idmac_stop(struct csi_priv *priv)
+{
+	unsigned long flags;
+	int ret;
+
+	/* mark next EOF interrupt as the last before stream off */
+	spin_lock_irqsave(&priv->irqlock, flags);
+	priv->last_eof = true;
+	spin_unlock_irqrestore(&priv->irqlock, flags);
+
+	/*
+	 * and then wait for interrupt handler to mark completion.
+	 */
+	ret = wait_for_completion_timeout(
+		&priv->last_eof_comp, msecs_to_jiffies(IMX_MEDIA_EOF_TIMEOUT));
+	if (ret == 0)
+		v4l2_warn(&priv->sd, "wait last EOF timeout\n");
+
+	devm_free_irq(priv->dev, priv->eof_irq, priv);
+	devm_free_irq(priv->dev, priv->nfb4eof_irq, priv);
+
+	csi_idmac_unsetup(priv, VB2_BUF_STATE_ERROR);
+
+	imx_media_free_dma_buf(priv->md, &priv->underrun_buf);
+
+	/* cancel the EOF timeout timer */
+	del_timer_sync(&priv->eof_timeout_timer);
+
+	csi_idmac_put_ipu_resources(priv);
+}
+
+/* Update the CSI whole sensor and active windows */
+static int csi_setup(struct csi_priv *priv)
+{
+	struct v4l2_mbus_framefmt *infmt, *outfmt;
+	struct v4l2_mbus_config sensor_mbus_cfg;
+	struct v4l2_of_endpoint *sensor_ep;
+	struct v4l2_mbus_framefmt if_fmt;
+
+	infmt = &priv->format_mbus[CSI_SINK_PAD];
+	outfmt = &priv->format_mbus[priv->active_output_pad];
+	sensor_ep = &priv->sensor->sensor_ep;
+
+	/* compose mbus_config from sensor endpoint */
+	sensor_mbus_cfg.type = sensor_ep->bus_type;
+	sensor_mbus_cfg.flags = (sensor_ep->bus_type == V4L2_MBUS_CSI2) ?
+		sensor_ep->bus.mipi_csi2.flags :
+		sensor_ep->bus.parallel.flags;
+
+	/*
+	 * we need to pass input sensor frame to CSI interface, but
+	 * with translated field type from output format
+	 */
+	if_fmt = *infmt;
+	if_fmt.field = outfmt->field;
+
+	ipu_csi_set_window(priv->csi, &priv->crop);
+
+	ipu_csi_init_interface(priv->csi, &sensor_mbus_cfg, &if_fmt);
+
+	ipu_csi_set_dest(priv->csi, priv->dest);
+
+	ipu_csi_dump(priv->csi);
+
+	return 0;
+}
+
+static int csi_start(struct csi_priv *priv)
+{
+	int ret;
+
+	if (!priv->sensor) {
+		v4l2_err(&priv->sd, "no sensor attached\n");
+		return -EINVAL;
+	}
+
+	if (priv->dest == IPU_CSI_DEST_IDMAC) {
+		ret = csi_idmac_start(priv);
+		if (ret)
+			return ret;
+	}
+
+	ret = csi_setup(priv);
+	if (ret)
+		goto idmac_stop;
+
+	/* start the frame interval monitor */
+	if (priv->fim) {
+		ret = imx_media_fim_set_stream(priv->fim, priv->sensor, true);
+		if (ret)
+			goto idmac_stop;
+	}
+
+	ret = ipu_csi_enable(priv->csi);
+	if (ret) {
+		v4l2_err(&priv->sd, "CSI enable error: %d\n", ret);
+		goto fim_off;
+	}
+
+	return 0;
+
+fim_off:
+	if (priv->fim)
+		imx_media_fim_set_stream(priv->fim, priv->sensor, false);
+idmac_stop:
+	if (priv->dest == IPU_CSI_DEST_IDMAC)
+		csi_idmac_stop(priv);
+	return ret;
+}
+
+static void csi_stop(struct csi_priv *priv)
+{
+	if (priv->dest == IPU_CSI_DEST_IDMAC)
+		csi_idmac_stop(priv);
+
+	/* stop the frame interval monitor */
+	if (priv->fim)
+		imx_media_fim_set_stream(priv->fim, priv->sensor, false);
+
+	ipu_csi_disable(priv->csi);
+}
+
+/*
+ * V4L2 subdev operations.
+ */
+
+static int csi_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	int ret = 0;
+
+	mutex_lock(&priv->lock);
+
+	if (!priv->src_sd || !priv->sink) {
+		ret = -EPIPE;
+		goto out;
+	}
+
+	dev_dbg(priv->dev, "stream %s\n", enable ? "ON" : "OFF");
+
+	if (enable && !priv->stream_on)
+		ret = csi_start(priv);
+	else if (!enable && priv->stream_on)
+		csi_stop(priv);
+
+	if (!ret)
+		priv->stream_on = enable;
+out:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int csi_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	int ret = 0;
+
+	mutex_lock(&priv->lock);
+
+	/*
+	 * If the power count is modified from 0 to != 0 or from != 0 to 0,
+	 * update the power state.
+	 */
+	if (priv->power_count == !on) {
+		if (priv->fim) {
+			ret = imx_media_fim_set_power(priv->fim, on);
+			if (ret)
+				goto out;
+		}
+	}
+
+	/* Update the power count. */
+	priv->power_count += on ? 1 : -1;
+	WARN_ON(priv->power_count < 0);
+out:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int csi_link_setup(struct media_entity *entity,
+			  const struct media_pad *local,
+			  const struct media_pad *remote, u32 flags)
+{
+	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	struct v4l2_subdev *remote_sd;
+	int ret = 0;
+
+	dev_dbg(priv->dev, "link setup %s -> %s\n", remote->entity->name,
+		local->entity->name);
+
+	mutex_lock(&priv->lock);
+
+	if (local->flags & MEDIA_PAD_FL_SINK) {
+		if (!is_media_entity_v4l2_subdev(remote->entity)) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		remote_sd = media_entity_to_v4l2_subdev(remote->entity);
+
+		if (flags & MEDIA_LNK_FL_ENABLED) {
+			if (priv->src_sd) {
+				ret = -EBUSY;
+				goto out;
+			}
+			priv->src_sd = remote_sd;
+		} else {
+			priv->src_sd = NULL;
+		}
+
+		goto out;
+	}
+
+	/* this is a source pad */
+
+	if (flags & MEDIA_LNK_FL_ENABLED) {
+		if (priv->sink) {
+			ret = -EBUSY;
+			goto out;
+		}
+	} else {
+		priv->sink = NULL;
+		goto out;
+	}
+
+	/* record which output pad is now active */
+	priv->active_output_pad = local->index;
+
+	/* set CSI destination */
+	if (local->index == CSI_SRC_PAD_IDMAC) {
+		if (!is_media_entity_v4l2_video_device(remote->entity)) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		priv->dest = IPU_CSI_DEST_IDMAC;
+	} else {
+		if (!is_media_entity_v4l2_subdev(remote->entity)) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		remote_sd = media_entity_to_v4l2_subdev(remote->entity);
+		switch (remote_sd->grp_id) {
+		case IMX_MEDIA_GRP_ID_VDIC:
+			priv->dest = IPU_CSI_DEST_VDIC;
+			break;
+		case IMX_MEDIA_GRP_ID_IC_PRP:
+			priv->dest = IPU_CSI_DEST_IC;
+			break;
+		default:
+			ret = -EINVAL;
+			goto out;
+		}
+	}
+
+	priv->sink = remote->entity;
+out:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int csi_link_validate(struct v4l2_subdev *sd,
+			     struct media_link *link,
+			     struct v4l2_subdev_format *source_fmt,
+			     struct v4l2_subdev_format *sink_fmt)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	struct v4l2_of_endpoint *sensor_ep;
+	struct imx_media_subdev *sensor;
+	bool is_csi2;
+	int ret;
+
+	ret = v4l2_subdev_link_validate_default(sd, link,
+						source_fmt, sink_fmt);
+	if (ret)
+		return ret;
+
+	sensor = __imx_media_find_sensor(priv->md, &priv->sd.entity);
+	if (IS_ERR(sensor)) {
+		v4l2_err(&priv->sd, "no sensor attached\n");
+		return PTR_ERR(priv->sensor);
+	}
+
+	mutex_lock(&priv->lock);
+
+	priv->sensor = sensor;
+	sensor_ep = &priv->sensor->sensor_ep;
+
+	is_csi2 = (sensor_ep->bus_type == V4L2_MBUS_CSI2);
+
+	if (is_csi2) {
+		int vc_num = 0;
+		/*
+		 * NOTE! It seems the virtual channels from the mipi csi-2
+		 * receiver are used only for routing by the video mux's,
+		 * or for hard-wired routing to the CSI's. Once the stream
+		 * enters the CSI's however, they are treated internally
+		 * in the IPU as virtual channel 0.
+		 */
+#if 0
+		mutex_unlock(&priv->lock);
+		vc_num = imx_media_find_mipi_csi2_channel(priv->md,
+							  &priv->sd.entity);
+		if (vc_num < 0)
+			return vc_num;
+		mutex_lock(&priv->lock);
+#endif
+		ipu_csi_set_mipi_datatype(priv->csi, vc_num,
+					  &priv->format_mbus[CSI_SINK_PAD]);
+	}
+
+	/* select either parallel or MIPI-CSI2 as input to CSI */
+	ipu_set_csi_src_mux(priv->ipu, priv->csi_id, is_csi2);
+
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int csi_eof_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->irqlock, flags);
+	csi_call_fim(priv);
+	spin_unlock_irqrestore(&priv->irqlock, flags);
+
+	return 0;
+}
+
+static int csi_try_crop(struct csi_priv *priv, struct v4l2_rect *crop,
+			struct imx_media_subdev *sensor)
+{
+	struct v4l2_of_endpoint *sensor_ep;
+	struct v4l2_mbus_framefmt *infmt;
+
+	infmt = &priv->format_mbus[CSI_SINK_PAD];
+	sensor_ep = &sensor->sensor_ep;
+
+	crop->width = min_t(__u32, infmt->width, crop->width);
+	if (crop->left + crop->width > infmt->width)
+		crop->left = infmt->width - crop->width;
+	/* adjust crop left/width to h/w alignment restrictions */
+	crop->left &= ~0x3;
+	crop->width &= ~0x7;
+
+	/*
+	 * FIXME: not sure why yet, but on interlaced bt.656,
+	 * changing the vertical cropping causes loss of vertical
+	 * sync, so fix it to NTSC/PAL active lines. NTSC contains
+	 * 2 extra lines of active video that need to be cropped.
+	 */
+	if (sensor_ep->bus_type == V4L2_MBUS_BT656 &&
+	    (V4L2_FIELD_HAS_BOTH(infmt->field) ||
+	     infmt->field == V4L2_FIELD_ALTERNATE)) {
+		crop->height = infmt->height;
+		crop->top = (infmt->height == 480) ? 2 : 0;
+	} else {
+		crop->height = min_t(__u32, infmt->height, crop->height);
+		if (crop->top + crop->height > infmt->height)
+			crop->top = infmt->height - crop->height;
+	}
+
+	return 0;
+}
+
+static int csi_enum_mbus_code(struct v4l2_subdev *sd,
+			      struct v4l2_subdev_pad_config *cfg,
+			      struct v4l2_subdev_mbus_code_enum *code)
+{
+	if (code->pad >= CSI_NUM_PADS)
+		return -EINVAL;
+
+	if (code->pad == CSI_SRC_PAD_DIRECT)
+		return imx_media_enum_ipu_format(NULL, &code->code,
+						 code->index, true);
+
+	return imx_media_enum_format(NULL, &code->code, code->index,
+				     true, false);
+}
+
+static int csi_get_fmt(struct v4l2_subdev *sd,
+		       struct v4l2_subdev_pad_config *cfg,
+		       struct v4l2_subdev_format *sdformat)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+
+	if (sdformat->pad >= CSI_NUM_PADS)
+		return -EINVAL;
+
+	mutex_lock(&priv->lock);
+
+	sdformat->format = priv->format_mbus[sdformat->pad];
+
+	mutex_unlock(&priv->lock);
+
+	return 0;
+}
+
+static int csi_set_fmt(struct v4l2_subdev *sd,
+		       struct v4l2_subdev_pad_config *cfg,
+		       struct v4l2_subdev_format *sdformat)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	const struct imx_media_pixfmt *cc, *incc;
+	struct v4l2_mbus_framefmt *infmt;
+	struct imx_media_subdev *sensor;
+	struct v4l2_rect crop;
+	int ret = 0;
+	u32 code;
+
+	if (sdformat->pad >= CSI_NUM_PADS)
+		return -EINVAL;
+
+	sensor = imx_media_find_sensor(priv->md, &priv->sd.entity);
+	if (IS_ERR(sensor)) {
+		v4l2_err(&priv->sd, "no sensor attached\n");
+		return PTR_ERR(sensor);
+	}
+
+	mutex_lock(&priv->lock);
+
+	if (priv->stream_on) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	infmt = &priv->format_mbus[CSI_SINK_PAD];
+
+	v4l_bound_align_image(&sdformat->format.width, MIN_W, MAX_W,
+			      W_ALIGN, &sdformat->format.height,
+			      MIN_H, MAX_H, H_ALIGN, S_ALIGN);
+
+	switch (sdformat->pad) {
+	case CSI_SRC_PAD_DIRECT:
+	case CSI_SRC_PAD_IDMAC:
+		crop.left = priv->crop.left;
+		crop.top = priv->crop.top;
+		crop.width = sdformat->format.width;
+		crop.height = sdformat->format.height;
+		ret = csi_try_crop(priv, &crop, sensor);
+		if (ret)
+			goto out;
+		sdformat->format.width = crop.width;
+		sdformat->format.height = crop.height;
+
+		if (sdformat->pad == CSI_SRC_PAD_IDMAC) {
+			cc = imx_media_find_format(0, sdformat->format.code,
+						   true, false);
+			if (!cc) {
+				imx_media_enum_format(NULL, &code, 0,
+						      true, false);
+				cc = imx_media_find_format(0, code,
+							   true, false);
+				sdformat->format.code = cc->codes[0];
+			}
+
+			incc = priv->cc[CSI_SINK_PAD];
+			if (cc->cs != incc->cs) {
+				sdformat->format.code = infmt->code;
+				cc = imx_media_find_format(
+					0, sdformat->format.code,
+					true, false);
+			}
+
+			if (sdformat->format.field != V4L2_FIELD_NONE)
+				sdformat->format.field = infmt->field;
+		} else {
+			cc = imx_media_find_ipu_format(0, sdformat->format.code,
+						       true);
+			if (!cc) {
+				imx_media_enum_ipu_format(NULL, &code, 0, true);
+				cc = imx_media_find_ipu_format(0, code, true);
+				sdformat->format.code = cc->codes[0];
+			}
+
+			sdformat->format.field = infmt->field;
+		}
+
+		/*
+		 * translate V4L2_FIELD_ALTERNATE to SEQ_TB or SEQ_BT
+		 * depending on input height (assume NTSC top-bottom
+		 * order if 480 lines, otherwise PAL bottom-top order).
+		 */
+		if (sdformat->format.field == V4L2_FIELD_ALTERNATE) {
+			sdformat->format.field =  (infmt->height == 480) ?
+				V4L2_FIELD_SEQ_TB : V4L2_FIELD_SEQ_BT;
+		}
+		break;
+	case CSI_SINK_PAD:
+		cc = imx_media_find_format(0, sdformat->format.code,
+					   true, false);
+		if (!cc) {
+			imx_media_enum_format(NULL, &code, 0, true, false);
+			cc = imx_media_find_format(0, code, true, false);
+			sdformat->format.code = cc->codes[0];
+		}
+		break;
+	default:
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (sdformat->which == V4L2_SUBDEV_FORMAT_TRY) {
+		cfg->try_fmt = sdformat->format;
+	} else {
+		priv->format_mbus[sdformat->pad] = sdformat->format;
+		priv->cc[sdformat->pad] = cc;
+		/* Update the crop window if this is an output pad  */
+		if (sdformat->pad == CSI_SRC_PAD_DIRECT ||
+		    sdformat->pad == CSI_SRC_PAD_IDMAC)
+			priv->crop = crop;
+	}
+
+out:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int csi_get_selection(struct v4l2_subdev *sd,
+			     struct v4l2_subdev_pad_config *cfg,
+			     struct v4l2_subdev_selection *sel)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *infmt;
+	int ret = 0;
+
+	if (sel->pad >= CSI_NUM_PADS || sel->pad == CSI_SINK_PAD)
+		return -EINVAL;
+
+	mutex_lock(&priv->lock);
+
+	infmt = &priv->format_mbus[CSI_SINK_PAD];
+
+	switch (sel->target) {
+	case V4L2_SEL_TGT_CROP_BOUNDS:
+		sel->r.left = 0;
+		sel->r.top = 0;
+		sel->r.width = infmt->width;
+		sel->r.height = infmt->height;
+		break;
+	case V4L2_SEL_TGT_CROP:
+		sel->r = priv->crop;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int csi_set_selection(struct v4l2_subdev *sd,
+			     struct v4l2_subdev_pad_config *cfg,
+			     struct v4l2_subdev_selection *sel)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *outfmt;
+	struct imx_media_subdev *sensor;
+	int ret = 0;
+
+	if (sel->pad >= CSI_NUM_PADS ||
+	    sel->pad == CSI_SINK_PAD ||
+	    sel->target != V4L2_SEL_TGT_CROP)
+		return -EINVAL;
+
+	sensor = imx_media_find_sensor(priv->md, &priv->sd.entity);
+	if (IS_ERR(sensor)) {
+		v4l2_err(&priv->sd, "no sensor attached\n");
+		return PTR_ERR(sensor);
+	}
+
+	mutex_lock(&priv->lock);
+
+	if (priv->stream_on) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	/*
+	 * Modifying the crop rectangle always changes the format on the source
+	 * pad. If the KEEP_CONFIG flag is set, just return the current crop
+	 * rectangle.
+	 */
+	if (sel->flags & V4L2_SEL_FLAG_KEEP_CONFIG) {
+		sel->r = priv->crop;
+		if (sel->which == V4L2_SUBDEV_FORMAT_TRY)
+			cfg->try_crop = sel->r;
+		goto out;
+	}
+
+	outfmt = &priv->format_mbus[sel->pad];
+
+	ret = csi_try_crop(priv, &sel->r, sensor);
+	if (ret)
+		goto out;
+
+	if (sel->which == V4L2_SUBDEV_FORMAT_TRY) {
+		cfg->try_crop = sel->r;
+	} else {
+		priv->crop = sel->r;
+		/* Update the source format */
+		outfmt->width = sel->r.width;
+		outfmt->height = sel->r.height;
+	}
+
+out:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int csi_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
+			       struct v4l2_event_subscription *sub)
+{
+	if (sub->type != V4L2_EVENT_IMX_FRAME_INTERVAL_ERROR)
+		return -EINVAL;
+	if (sub->id != 0)
+		return -EINVAL;
+
+	return v4l2_event_subscribe(fh, sub, 0, NULL);
+}
+
+static int csi_unsubscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
+				 struct v4l2_event_subscription *sub)
+{
+	return v4l2_event_unsubscribe(fh, sub);
+}
+
+/*
+ * retrieve our pads parsed from the OF graph by the media device
+ */
+static int csi_registered(struct v4l2_subdev *sd)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	int i, ret;
+	u32 code;
+
+	/* get media device */
+	priv->md = dev_get_drvdata(sd->v4l2_dev->dev);
+
+	/* get handle to IPU CSI */
+	priv->csi = ipu_csi_get(priv->ipu, priv->csi_id);
+	if (IS_ERR(priv->csi)) {
+		v4l2_err(&priv->sd, "failed to get CSI%d\n", priv->csi_id);
+		return PTR_ERR(priv->csi);
+	}
+
+	for (i = 0; i < CSI_NUM_PADS; i++) {
+		priv->pad[i].flags = (i == CSI_SINK_PAD) ?
+			MEDIA_PAD_FL_SINK : MEDIA_PAD_FL_SOURCE;
+
+		code = 0;
+		if (i == CSI_SRC_PAD_DIRECT)
+			imx_media_enum_ipu_format(NULL, &code, 0, true);
+
+		/* set a default mbus format  */
+		ret = imx_media_init_mbus_fmt(&priv->format_mbus[i],
+					      640, 480, code, V4L2_FIELD_NONE,
+					      &priv->cc[i]);
+		if (ret)
+			goto put_csi;
+	}
+
+	priv->fim = imx_media_fim_init(&priv->sd);
+	if (IS_ERR(priv->fim)) {
+		ret = PTR_ERR(priv->fim);
+		goto put_csi;
+	}
+
+	ret = media_entity_pads_init(&sd->entity, CSI_NUM_PADS, priv->pad);
+	if (ret)
+		goto free_fim;
+
+	ret = imx_media_capture_device_register(priv->vdev);
+	if (ret)
+		goto free_fim;
+
+	return 0;
+
+free_fim:
+	if (priv->fim)
+		imx_media_fim_free(priv->fim);
+put_csi:
+	ipu_csi_put(priv->csi);
+	return ret;
+}
+
+static void csi_unregistered(struct v4l2_subdev *sd)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+
+	imx_media_capture_device_unregister(priv->vdev);
+
+	if (priv->fim)
+		imx_media_fim_free(priv->fim);
+
+	if (!IS_ERR_OR_NULL(priv->csi))
+		ipu_csi_put(priv->csi);
+}
+
+static struct media_entity_operations csi_entity_ops = {
+	.link_setup = csi_link_setup,
+	.link_validate = v4l2_subdev_link_validate,
+};
+
+static struct v4l2_subdev_core_ops csi_core_ops = {
+	.s_power = csi_s_power,
+	.interrupt_service_routine = csi_eof_isr,
+	.subscribe_event = csi_subscribe_event,
+	.unsubscribe_event = csi_unsubscribe_event,
+};
+
+static struct v4l2_subdev_video_ops csi_video_ops = {
+	.s_stream = csi_s_stream,
+};
+
+static struct v4l2_subdev_pad_ops csi_pad_ops = {
+	.enum_mbus_code = csi_enum_mbus_code,
+	.get_fmt = csi_get_fmt,
+	.set_fmt = csi_set_fmt,
+	.get_selection = csi_get_selection,
+	.set_selection = csi_set_selection,
+	.link_validate = csi_link_validate,
+};
+
+static struct v4l2_subdev_ops csi_subdev_ops = {
+	.core = &csi_core_ops,
+	.video = &csi_video_ops,
+	.pad = &csi_pad_ops,
+};
+
+static struct v4l2_subdev_internal_ops csi_internal_ops = {
+	.registered = csi_registered,
+	.unregistered = csi_unregistered,
+};
+
+static int imx_csi_probe(struct platform_device *pdev)
+{
+	struct ipu_client_platformdata *pdata;
+	struct pinctrl *pinctrl;
+	struct csi_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, &priv->sd);
+	priv->dev = &pdev->dev;
+
+	ret = dma_set_coherent_mask(priv->dev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
+
+	/* get parent IPU */
+	priv->ipu = dev_get_drvdata(priv->dev->parent);
+
+	/* get our CSI id */
+	pdata = priv->dev->platform_data;
+	priv->csi_id = pdata->csi;
+	priv->smfc_id = (priv->csi_id == 0) ? 0 : 2;
+
+	init_timer(&priv->eof_timeout_timer);
+	priv->eof_timeout_timer.data = (unsigned long)priv;
+	priv->eof_timeout_timer.function = csi_idmac_eof_timeout;
+	spin_lock_init(&priv->irqlock);
+
+	v4l2_subdev_init(&priv->sd, &csi_subdev_ops);
+	v4l2_set_subdevdata(&priv->sd, priv);
+	priv->sd.internal_ops = &csi_internal_ops;
+	priv->sd.entity.ops = &csi_entity_ops;
+	priv->sd.entity.function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;
+	priv->sd.dev = &pdev->dev;
+	priv->sd.of_node = pdata->of_node;
+	priv->sd.owner = THIS_MODULE;
+	priv->sd.flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
+	priv->sd.grp_id = priv->csi_id ?
+		IMX_MEDIA_GRP_ID_CSI1 : IMX_MEDIA_GRP_ID_CSI0;
+	imx_media_grp_id_to_sd_name(priv->sd.name, sizeof(priv->sd.name),
+				    priv->sd.grp_id, ipu_get_num(priv->ipu));
+
+	priv->vdev = imx_media_capture_device_init(&priv->sd,
+						   CSI_SRC_PAD_IDMAC);
+	if (IS_ERR(priv->vdev))
+		return PTR_ERR(priv->vdev);
+
+	v4l2_ctrl_handler_init(&priv->ctrl_hdlr, 0);
+	priv->sd.ctrl_handler = &priv->ctrl_hdlr;
+
+	/*
+	 * The IPUv3 driver did not assign an of_node to this
+	 * device. As a result, pinctrl does not automatically
+	 * configure our pin groups, so we need to do that manually
+	 * here, after setting this device's of_node.
+	 */
+	priv->dev->of_node = pdata->of_node;
+	pinctrl = devm_pinctrl_get_select_default(priv->dev);
+
+	mutex_init(&priv->lock);
+
+	ret = v4l2_async_register_subdev(&priv->sd);
+	if (ret)
+		goto free;
+
+	return 0;
+free:
+	v4l2_ctrl_handler_free(&priv->ctrl_hdlr);
+	mutex_destroy(&priv->lock);
+	imx_media_capture_device_remove(priv->vdev);
+	return ret;
+}
+
+static int imx_csi_remove(struct platform_device *pdev)
+{
+	struct v4l2_subdev *sd = platform_get_drvdata(pdev);
+	struct csi_priv *priv = sd_to_dev(sd);
+
+	v4l2_ctrl_handler_free(&priv->ctrl_hdlr);
+	mutex_destroy(&priv->lock);
+	imx_media_capture_device_remove(priv->vdev);
+	v4l2_async_unregister_subdev(sd);
+	media_entity_cleanup(&sd->entity);
+
+	return 0;
+}
+
+static const struct platform_device_id imx_csi_ids[] = {
+	{ .name = "imx-ipuv3-csi" },
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, imx_csi_ids);
+
+static struct platform_driver imx_csi_driver = {
+	.probe = imx_csi_probe,
+	.remove = imx_csi_remove,
+	.id_table = imx_csi_ids,
+	.driver = {
+		.name = "imx-ipuv3-csi",
+	},
+};
+module_platform_driver(imx_csi_driver);
+
+MODULE_DESCRIPTION("i.MX CSI subdev driver");
+MODULE_AUTHOR("Steve Longerbeam <steve_longerbeam@mentor.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:imx-ipuv3-csi");
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: slongerbeam@gmail.com (Steve Longerbeam)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 21/39] media: imx: Add CSI subdev driver
Date: Mon, 27 Mar 2017 17:40:38 -0700	[thread overview]
Message-ID: <1490661656-10318-22-git-send-email-steve_longerbeam@mentor.com> (raw)
In-Reply-To: <1490661656-10318-1-git-send-email-steve_longerbeam@mentor.com>

This is a media entity subdevice for the i.MX Camera
Sensor Interface module.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
---
 drivers/staging/media/imx/Kconfig         |   14 +
 drivers/staging/media/imx/Makefile        |    2 +
 drivers/staging/media/imx/imx-media-csi.c | 1318 +++++++++++++++++++++++++++++
 3 files changed, 1334 insertions(+)
 create mode 100644 drivers/staging/media/imx/imx-media-csi.c

diff --git a/drivers/staging/media/imx/Kconfig b/drivers/staging/media/imx/Kconfig
index 62a3c34..e27ad6d 100644
--- a/drivers/staging/media/imx/Kconfig
+++ b/drivers/staging/media/imx/Kconfig
@@ -4,3 +4,17 @@ config VIDEO_IMX_MEDIA
 	---help---
 	  Say yes here to enable support for video4linux media controller
 	  driver for the i.MX5/6 SOC.
+
+if VIDEO_IMX_MEDIA
+menu "i.MX5/6 Media Sub devices"
+
+config VIDEO_IMX_CSI
+	tristate "i.MX5/6 Camera Sensor Interface driver"
+	depends on VIDEO_IMX_MEDIA && VIDEO_DEV && I2C
+	select VIDEOBUF2_DMA_CONTIG
+	default y
+	---help---
+	  A video4linux camera sensor interface driver for i.MX5/6.
+
+endmenu
+endif
diff --git a/drivers/staging/media/imx/Makefile b/drivers/staging/media/imx/Makefile
index 4606a3a..c054490 100644
--- a/drivers/staging/media/imx/Makefile
+++ b/drivers/staging/media/imx/Makefile
@@ -4,3 +4,5 @@ imx-media-common-objs := imx-media-utils.o imx-media-fim.o
 obj-$(CONFIG_VIDEO_IMX_MEDIA) += imx-media.o
 obj-$(CONFIG_VIDEO_IMX_MEDIA) += imx-media-common.o
 obj-$(CONFIG_VIDEO_IMX_MEDIA) += imx-media-capture.o
+
+obj-$(CONFIG_VIDEO_IMX_CSI) += imx-media-csi.o
diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
new file mode 100644
index 0000000..9e2a73c
--- /dev/null
+++ b/drivers/staging/media/imx/imx-media-csi.c
@@ -0,0 +1,1318 @@
+/*
+ * V4L2 Capture CSI Subdev for Freescale i.MX5/6 SOC
+ *
+ * Copyright (c) 2014-2016 Mentor Graphics Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-mc.h>
+#include <media/v4l2-of.h>
+#include <media/v4l2-subdev.h>
+#include <media/videobuf2-dma-contig.h>
+#include <video/imx-ipu-v3.h>
+#include <media/imx.h>
+#include "imx-media.h"
+
+/*
+ * Min/Max supported width and heights.
+ *
+ * We allow planar output, so we have to align width by 16 pixels
+ * to meet IDMAC alignment requirements.
+ *
+ * TODO: move this into pad format negotiation, if capture device
+ * has not requested planar formats, we should allow 8 pixel
+ * alignment.
+ */
+#define MIN_W       176
+#define MIN_H       144
+#define MAX_W      4096
+#define MAX_H      4096
+#define W_ALIGN    4 /* multiple of 16 pixels */
+#define H_ALIGN    1 /* multiple of 2 lines */
+#define S_ALIGN    1 /* multiple of 2 */
+
+struct csi_priv {
+	struct device *dev;
+	struct ipu_soc *ipu;
+	struct imx_media_dev *md;
+	struct v4l2_subdev sd;
+	struct media_pad pad[CSI_NUM_PADS];
+	/* the video device at IDMAC output pad */
+	struct imx_media_video_dev *vdev;
+	struct imx_media_fim *fim;
+	int csi_id;
+	int smfc_id;
+
+	/* lock to protect all members below */
+	struct mutex lock;
+
+	int active_output_pad;
+
+	struct ipuv3_channel *idmac_ch;
+	struct ipu_smfc *smfc;
+	struct ipu_csi *csi;
+
+	struct v4l2_mbus_framefmt format_mbus[CSI_NUM_PADS];
+	const struct imx_media_pixfmt *cc[CSI_NUM_PADS];
+	struct v4l2_rect crop;
+
+	/* active vb2 buffers to send to video dev sink */
+	struct imx_media_buffer *active_vb2_buf[2];
+	struct imx_media_dma_buf underrun_buf;
+
+	int ipu_buf_num;  /* ipu double buffer index: 0-1 */
+
+	/* the sink for the captured frames */
+	struct media_entity *sink;
+	enum ipu_csi_dest dest;
+	/* the source subdev */
+	struct v4l2_subdev *src_sd;
+
+	/* the mipi virtual channel number at link validate */
+	int vc_num;
+
+	/* the attached sensor at stream on */
+	struct imx_media_subdev *sensor;
+
+	spinlock_t irqlock; /* protect eof_irq handler */
+	struct timer_list eof_timeout_timer;
+	int eof_irq;
+	int nfb4eof_irq;
+
+	struct v4l2_ctrl_handler ctrl_hdlr;
+
+	int power_count; /* power counter */
+	bool stream_on;  /* streaming is on */
+	bool last_eof;   /* waiting for last EOF at stream off */
+	bool nfb4eof;    /* NFB4EOF encountered during streaming */
+	struct completion last_eof_comp;
+};
+
+static inline struct csi_priv *sd_to_dev(struct v4l2_subdev *sdev)
+{
+	return container_of(sdev, struct csi_priv, sd);
+}
+
+static void csi_idmac_put_ipu_resources(struct csi_priv *priv)
+{
+	if (!IS_ERR_OR_NULL(priv->idmac_ch))
+		ipu_idmac_put(priv->idmac_ch);
+	priv->idmac_ch = NULL;
+
+	if (!IS_ERR_OR_NULL(priv->smfc))
+		ipu_smfc_put(priv->smfc);
+	priv->smfc = NULL;
+}
+
+static int csi_idmac_get_ipu_resources(struct csi_priv *priv)
+{
+	int ch_num, ret;
+
+	ch_num = IPUV3_CHANNEL_CSI0 + priv->smfc_id;
+
+	priv->smfc = ipu_smfc_get(priv->ipu, ch_num);
+	if (IS_ERR(priv->smfc)) {
+		v4l2_err(&priv->sd, "failed to get SMFC\n");
+		ret = PTR_ERR(priv->smfc);
+		goto out;
+	}
+
+	priv->idmac_ch = ipu_idmac_get(priv->ipu, ch_num);
+	if (IS_ERR(priv->idmac_ch)) {
+		v4l2_err(&priv->sd, "could not get IDMAC channel %u\n",
+			 ch_num);
+		ret = PTR_ERR(priv->idmac_ch);
+		goto out;
+	}
+
+	return 0;
+out:
+	csi_idmac_put_ipu_resources(priv);
+	return ret;
+}
+
+static void csi_vb2_buf_done(struct csi_priv *priv)
+{
+	struct imx_media_video_dev *vdev = priv->vdev;
+	struct imx_media_buffer *done, *next;
+	struct vb2_buffer *vb;
+	dma_addr_t phys;
+
+	done = priv->active_vb2_buf[priv->ipu_buf_num];
+	if (done) {
+		vb = &done->vbuf.vb2_buf;
+		vb->timestamp = ktime_get_ns();
+		vb2_buffer_done(vb, priv->nfb4eof ?
+				VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
+	}
+
+	priv->nfb4eof = false;
+
+	/* get next queued buffer */
+	next = imx_media_capture_device_next_buf(vdev);
+	if (next) {
+		phys = vb2_dma_contig_plane_dma_addr(&next->vbuf.vb2_buf, 0);
+		priv->active_vb2_buf[priv->ipu_buf_num] = next;
+	} else {
+		phys = priv->underrun_buf.phys;
+		priv->active_vb2_buf[priv->ipu_buf_num] = NULL;
+	}
+
+	if (ipu_idmac_buffer_is_ready(priv->idmac_ch, priv->ipu_buf_num))
+		ipu_idmac_clear_buffer(priv->idmac_ch, priv->ipu_buf_num);
+
+	ipu_cpmem_set_buffer(priv->idmac_ch, priv->ipu_buf_num, phys);
+}
+
+static void csi_call_fim(struct csi_priv *priv)
+{
+	if (priv->fim) {
+		struct timespec cur_ts;
+
+		ktime_get_ts(&cur_ts);
+		/* call frame interval monitor */
+		imx_media_fim_eof_monitor(priv->fim, &cur_ts);
+	}
+}
+
+static irqreturn_t csi_idmac_eof_interrupt(int irq, void *dev_id)
+{
+	struct csi_priv *priv = dev_id;
+
+	spin_lock(&priv->irqlock);
+
+	if (priv->last_eof) {
+		complete(&priv->last_eof_comp);
+		priv->last_eof = false;
+		goto unlock;
+	}
+
+	csi_call_fim(priv);
+
+	csi_vb2_buf_done(priv);
+
+	/* select new IPU buf */
+	ipu_idmac_select_buffer(priv->idmac_ch, priv->ipu_buf_num);
+	/* toggle IPU double-buffer index */
+	priv->ipu_buf_num ^= 1;
+
+	/* bump the EOF timeout timer */
+	mod_timer(&priv->eof_timeout_timer,
+		  jiffies + msecs_to_jiffies(IMX_MEDIA_EOF_TIMEOUT));
+
+unlock:
+	spin_unlock(&priv->irqlock);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t csi_idmac_nfb4eof_interrupt(int irq, void *dev_id)
+{
+	struct csi_priv *priv = dev_id;
+
+	spin_lock(&priv->irqlock);
+
+	/*
+	 * this is not an unrecoverable error, just mark
+	 * the next captured frame with vb2 error flag.
+	 */
+	priv->nfb4eof = true;
+
+	v4l2_err(&priv->sd, "NFB4EOF\n");
+
+	spin_unlock(&priv->irqlock);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * EOF timeout timer function. This is an unrecoverable condition
+ * without a stream restart.
+ */
+static void csi_idmac_eof_timeout(unsigned long data)
+{
+	struct csi_priv *priv = (struct csi_priv *)data;
+	struct imx_media_video_dev *vdev = priv->vdev;
+
+	v4l2_err(&priv->sd, "EOF timeout\n");
+
+	/* signal a fatal error to capture device */
+	imx_media_capture_device_error(vdev);
+}
+
+static void csi_idmac_setup_vb2_buf(struct csi_priv *priv, dma_addr_t *phys)
+{
+	struct imx_media_video_dev *vdev = priv->vdev;
+	struct imx_media_buffer *buf;
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		buf = imx_media_capture_device_next_buf(vdev);
+		priv->active_vb2_buf[i] = buf;
+		phys[i] = vb2_dma_contig_plane_dma_addr(&buf->vbuf.vb2_buf, 0);
+	}
+}
+
+static void csi_idmac_unsetup_vb2_buf(struct csi_priv *priv,
+				      enum vb2_buffer_state return_status)
+{
+	struct imx_media_buffer *buf;
+	int i;
+
+	/* return any remaining active frames with return_status */
+	for (i = 0; i < 2; i++) {
+		buf = priv->active_vb2_buf[i];
+		if (buf) {
+			struct vb2_buffer *vb = &buf->vbuf.vb2_buf;
+
+			vb->timestamp = ktime_get_ns();
+			vb2_buffer_done(vb, return_status);
+		}
+	}
+}
+
+/* init the SMFC IDMAC channel */
+static int csi_idmac_setup_channel(struct csi_priv *priv)
+{
+	struct imx_media_video_dev *vdev = priv->vdev;
+	struct v4l2_of_endpoint *sensor_ep;
+	struct v4l2_mbus_framefmt *infmt;
+	unsigned int burst_size;
+	struct ipu_image image;
+	dma_addr_t phys[2];
+	bool passthrough;
+	int ret;
+
+	infmt = &priv->format_mbus[CSI_SINK_PAD];
+	sensor_ep = &priv->sensor->sensor_ep;
+
+	ipu_cpmem_zero(priv->idmac_ch);
+
+	memset(&image, 0, sizeof(image));
+	image.pix = vdev->fmt.fmt.pix;
+	image.rect.width = image.pix.width;
+	image.rect.height = image.pix.height;
+
+	csi_idmac_setup_vb2_buf(priv, phys);
+
+	image.phys0 = phys[0];
+	image.phys1 = phys[1];
+
+	ret = ipu_cpmem_set_image(priv->idmac_ch, &image);
+	if (ret)
+		goto unsetup_vb2;
+
+	burst_size = (image.pix.width & 0xf) ? 8 : 16;
+
+	ipu_cpmem_set_burstsize(priv->idmac_ch, burst_size);
+
+	/*
+	 * If the sensor uses 16-bit parallel CSI bus, we must handle
+	 * the data internally in the IPU as 16-bit generic, aka
+	 * passthrough mode.
+	 */
+	passthrough = (sensor_ep->bus_type != V4L2_MBUS_CSI2 &&
+		       sensor_ep->bus.parallel.bus_width >= 16);
+
+	if (passthrough)
+		ipu_cpmem_set_format_passthrough(priv->idmac_ch, 16);
+
+	/*
+	 * Set the channel for the direct CSI-->memory via SMFC
+	 * use-case to very high priority, by enabling the watermark
+	 * signal in the SMFC, enabling WM in the channel, and setting
+	 * the channel priority to high.
+	 *
+	 * Refer to the i.mx6 rev. D TRM Table 36-8: Calculated priority
+	 * value.
+	 *
+	 * The WM's are set very low by intention here to ensure that
+	 * the SMFC FIFOs do not overflow.
+	 */
+	ipu_smfc_set_watermark(priv->smfc, 0x02, 0x01);
+	ipu_cpmem_set_high_priority(priv->idmac_ch);
+	ipu_idmac_enable_watermark(priv->idmac_ch, true);
+	ipu_cpmem_set_axi_id(priv->idmac_ch, 0);
+	ipu_idmac_lock_enable(priv->idmac_ch, 8);
+
+	burst_size = ipu_cpmem_get_burstsize(priv->idmac_ch);
+	burst_size = passthrough ?
+		(burst_size >> 3) - 1 : (burst_size >> 2) - 1;
+
+	ipu_smfc_set_burstsize(priv->smfc, burst_size);
+
+	if (image.pix.field == V4L2_FIELD_NONE &&
+	    V4L2_FIELD_HAS_BOTH(infmt->field))
+		ipu_cpmem_interlaced_scan(priv->idmac_ch,
+					  image.pix.bytesperline);
+
+	ipu_idmac_set_double_buffer(priv->idmac_ch, true);
+
+	return 0;
+
+unsetup_vb2:
+	csi_idmac_unsetup_vb2_buf(priv, VB2_BUF_STATE_QUEUED);
+	return ret;
+}
+
+static void csi_idmac_unsetup(struct csi_priv *priv,
+			      enum vb2_buffer_state state)
+{
+	ipu_idmac_disable_channel(priv->idmac_ch);
+	ipu_smfc_disable(priv->smfc);
+
+	csi_idmac_unsetup_vb2_buf(priv, state);
+}
+
+static int csi_idmac_setup(struct csi_priv *priv)
+{
+	int ret;
+
+	ret = csi_idmac_setup_channel(priv);
+	if (ret)
+		return ret;
+
+	ipu_cpmem_dump(priv->idmac_ch);
+	ipu_dump(priv->ipu);
+
+	ipu_smfc_enable(priv->smfc);
+
+	/* set buffers ready */
+	ipu_idmac_select_buffer(priv->idmac_ch, 0);
+	ipu_idmac_select_buffer(priv->idmac_ch, 1);
+
+	/* enable the channels */
+	ipu_idmac_enable_channel(priv->idmac_ch);
+
+	return 0;
+}
+
+static int csi_idmac_start(struct csi_priv *priv)
+{
+	struct imx_media_video_dev *vdev = priv->vdev;
+	struct v4l2_pix_format *outfmt;
+	int ret;
+
+	ret = csi_idmac_get_ipu_resources(priv);
+	if (ret)
+		return ret;
+
+	ipu_smfc_map_channel(priv->smfc, priv->csi_id, priv->vc_num);
+
+	outfmt = &vdev->fmt.fmt.pix;
+
+	ret = imx_media_alloc_dma_buf(priv->md, &priv->underrun_buf,
+				      outfmt->sizeimage);
+	if (ret)
+		goto out_put_ipu;
+
+	priv->ipu_buf_num = 0;
+
+	/* init EOF completion waitq */
+	init_completion(&priv->last_eof_comp);
+	priv->last_eof = false;
+	priv->nfb4eof = false;
+
+	ret = csi_idmac_setup(priv);
+	if (ret) {
+		v4l2_err(&priv->sd, "csi_idmac_setup failed: %d\n", ret);
+		goto out_free_dma_buf;
+	}
+
+	priv->nfb4eof_irq = ipu_idmac_channel_irq(priv->ipu,
+						 priv->idmac_ch,
+						 IPU_IRQ_NFB4EOF);
+	ret = devm_request_irq(priv->dev, priv->nfb4eof_irq,
+			       csi_idmac_nfb4eof_interrupt, 0,
+			       "imx-smfc-nfb4eof", priv);
+	if (ret) {
+		v4l2_err(&priv->sd,
+			 "Error registering NFB4EOF irq: %d\n", ret);
+		goto out_unsetup;
+	}
+
+	priv->eof_irq = ipu_idmac_channel_irq(priv->ipu, priv->idmac_ch,
+					      IPU_IRQ_EOF);
+
+	ret = devm_request_irq(priv->dev, priv->eof_irq,
+			       csi_idmac_eof_interrupt, 0,
+			       "imx-smfc-eof", priv);
+	if (ret) {
+		v4l2_err(&priv->sd,
+			 "Error registering eof irq: %d\n", ret);
+		goto out_free_nfb4eof_irq;
+	}
+
+	/* start the EOF timeout timer */
+	mod_timer(&priv->eof_timeout_timer,
+		  jiffies + msecs_to_jiffies(IMX_MEDIA_EOF_TIMEOUT));
+
+	return 0;
+
+out_free_nfb4eof_irq:
+	devm_free_irq(priv->dev, priv->nfb4eof_irq, priv);
+out_unsetup:
+	csi_idmac_unsetup(priv, VB2_BUF_STATE_QUEUED);
+out_free_dma_buf:
+	imx_media_free_dma_buf(priv->md, &priv->underrun_buf);
+out_put_ipu:
+	csi_idmac_put_ipu_resources(priv);
+	return ret;
+}
+
+static void csi_idmac_stop(struct csi_priv *priv)
+{
+	unsigned long flags;
+	int ret;
+
+	/* mark next EOF interrupt as the last before stream off */
+	spin_lock_irqsave(&priv->irqlock, flags);
+	priv->last_eof = true;
+	spin_unlock_irqrestore(&priv->irqlock, flags);
+
+	/*
+	 * and then wait for interrupt handler to mark completion.
+	 */
+	ret = wait_for_completion_timeout(
+		&priv->last_eof_comp, msecs_to_jiffies(IMX_MEDIA_EOF_TIMEOUT));
+	if (ret == 0)
+		v4l2_warn(&priv->sd, "wait last EOF timeout\n");
+
+	devm_free_irq(priv->dev, priv->eof_irq, priv);
+	devm_free_irq(priv->dev, priv->nfb4eof_irq, priv);
+
+	csi_idmac_unsetup(priv, VB2_BUF_STATE_ERROR);
+
+	imx_media_free_dma_buf(priv->md, &priv->underrun_buf);
+
+	/* cancel the EOF timeout timer */
+	del_timer_sync(&priv->eof_timeout_timer);
+
+	csi_idmac_put_ipu_resources(priv);
+}
+
+/* Update the CSI whole sensor and active windows */
+static int csi_setup(struct csi_priv *priv)
+{
+	struct v4l2_mbus_framefmt *infmt, *outfmt;
+	struct v4l2_mbus_config sensor_mbus_cfg;
+	struct v4l2_of_endpoint *sensor_ep;
+	struct v4l2_mbus_framefmt if_fmt;
+
+	infmt = &priv->format_mbus[CSI_SINK_PAD];
+	outfmt = &priv->format_mbus[priv->active_output_pad];
+	sensor_ep = &priv->sensor->sensor_ep;
+
+	/* compose mbus_config from sensor endpoint */
+	sensor_mbus_cfg.type = sensor_ep->bus_type;
+	sensor_mbus_cfg.flags = (sensor_ep->bus_type == V4L2_MBUS_CSI2) ?
+		sensor_ep->bus.mipi_csi2.flags :
+		sensor_ep->bus.parallel.flags;
+
+	/*
+	 * we need to pass input sensor frame to CSI interface, but
+	 * with translated field type from output format
+	 */
+	if_fmt = *infmt;
+	if_fmt.field = outfmt->field;
+
+	ipu_csi_set_window(priv->csi, &priv->crop);
+
+	ipu_csi_init_interface(priv->csi, &sensor_mbus_cfg, &if_fmt);
+
+	ipu_csi_set_dest(priv->csi, priv->dest);
+
+	ipu_csi_dump(priv->csi);
+
+	return 0;
+}
+
+static int csi_start(struct csi_priv *priv)
+{
+	int ret;
+
+	if (!priv->sensor) {
+		v4l2_err(&priv->sd, "no sensor attached\n");
+		return -EINVAL;
+	}
+
+	if (priv->dest == IPU_CSI_DEST_IDMAC) {
+		ret = csi_idmac_start(priv);
+		if (ret)
+			return ret;
+	}
+
+	ret = csi_setup(priv);
+	if (ret)
+		goto idmac_stop;
+
+	/* start the frame interval monitor */
+	if (priv->fim) {
+		ret = imx_media_fim_set_stream(priv->fim, priv->sensor, true);
+		if (ret)
+			goto idmac_stop;
+	}
+
+	ret = ipu_csi_enable(priv->csi);
+	if (ret) {
+		v4l2_err(&priv->sd, "CSI enable error: %d\n", ret);
+		goto fim_off;
+	}
+
+	return 0;
+
+fim_off:
+	if (priv->fim)
+		imx_media_fim_set_stream(priv->fim, priv->sensor, false);
+idmac_stop:
+	if (priv->dest == IPU_CSI_DEST_IDMAC)
+		csi_idmac_stop(priv);
+	return ret;
+}
+
+static void csi_stop(struct csi_priv *priv)
+{
+	if (priv->dest == IPU_CSI_DEST_IDMAC)
+		csi_idmac_stop(priv);
+
+	/* stop the frame interval monitor */
+	if (priv->fim)
+		imx_media_fim_set_stream(priv->fim, priv->sensor, false);
+
+	ipu_csi_disable(priv->csi);
+}
+
+/*
+ * V4L2 subdev operations.
+ */
+
+static int csi_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	int ret = 0;
+
+	mutex_lock(&priv->lock);
+
+	if (!priv->src_sd || !priv->sink) {
+		ret = -EPIPE;
+		goto out;
+	}
+
+	dev_dbg(priv->dev, "stream %s\n", enable ? "ON" : "OFF");
+
+	if (enable && !priv->stream_on)
+		ret = csi_start(priv);
+	else if (!enable && priv->stream_on)
+		csi_stop(priv);
+
+	if (!ret)
+		priv->stream_on = enable;
+out:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int csi_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	int ret = 0;
+
+	mutex_lock(&priv->lock);
+
+	/*
+	 * If the power count is modified from 0 to != 0 or from != 0 to 0,
+	 * update the power state.
+	 */
+	if (priv->power_count == !on) {
+		if (priv->fim) {
+			ret = imx_media_fim_set_power(priv->fim, on);
+			if (ret)
+				goto out;
+		}
+	}
+
+	/* Update the power count. */
+	priv->power_count += on ? 1 : -1;
+	WARN_ON(priv->power_count < 0);
+out:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int csi_link_setup(struct media_entity *entity,
+			  const struct media_pad *local,
+			  const struct media_pad *remote, u32 flags)
+{
+	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	struct v4l2_subdev *remote_sd;
+	int ret = 0;
+
+	dev_dbg(priv->dev, "link setup %s -> %s\n", remote->entity->name,
+		local->entity->name);
+
+	mutex_lock(&priv->lock);
+
+	if (local->flags & MEDIA_PAD_FL_SINK) {
+		if (!is_media_entity_v4l2_subdev(remote->entity)) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		remote_sd = media_entity_to_v4l2_subdev(remote->entity);
+
+		if (flags & MEDIA_LNK_FL_ENABLED) {
+			if (priv->src_sd) {
+				ret = -EBUSY;
+				goto out;
+			}
+			priv->src_sd = remote_sd;
+		} else {
+			priv->src_sd = NULL;
+		}
+
+		goto out;
+	}
+
+	/* this is a source pad */
+
+	if (flags & MEDIA_LNK_FL_ENABLED) {
+		if (priv->sink) {
+			ret = -EBUSY;
+			goto out;
+		}
+	} else {
+		priv->sink = NULL;
+		goto out;
+	}
+
+	/* record which output pad is now active */
+	priv->active_output_pad = local->index;
+
+	/* set CSI destination */
+	if (local->index == CSI_SRC_PAD_IDMAC) {
+		if (!is_media_entity_v4l2_video_device(remote->entity)) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		priv->dest = IPU_CSI_DEST_IDMAC;
+	} else {
+		if (!is_media_entity_v4l2_subdev(remote->entity)) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		remote_sd = media_entity_to_v4l2_subdev(remote->entity);
+		switch (remote_sd->grp_id) {
+		case IMX_MEDIA_GRP_ID_VDIC:
+			priv->dest = IPU_CSI_DEST_VDIC;
+			break;
+		case IMX_MEDIA_GRP_ID_IC_PRP:
+			priv->dest = IPU_CSI_DEST_IC;
+			break;
+		default:
+			ret = -EINVAL;
+			goto out;
+		}
+	}
+
+	priv->sink = remote->entity;
+out:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int csi_link_validate(struct v4l2_subdev *sd,
+			     struct media_link *link,
+			     struct v4l2_subdev_format *source_fmt,
+			     struct v4l2_subdev_format *sink_fmt)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	struct v4l2_of_endpoint *sensor_ep;
+	struct imx_media_subdev *sensor;
+	bool is_csi2;
+	int ret;
+
+	ret = v4l2_subdev_link_validate_default(sd, link,
+						source_fmt, sink_fmt);
+	if (ret)
+		return ret;
+
+	sensor = __imx_media_find_sensor(priv->md, &priv->sd.entity);
+	if (IS_ERR(sensor)) {
+		v4l2_err(&priv->sd, "no sensor attached\n");
+		return PTR_ERR(priv->sensor);
+	}
+
+	mutex_lock(&priv->lock);
+
+	priv->sensor = sensor;
+	sensor_ep = &priv->sensor->sensor_ep;
+
+	is_csi2 = (sensor_ep->bus_type == V4L2_MBUS_CSI2);
+
+	if (is_csi2) {
+		int vc_num = 0;
+		/*
+		 * NOTE! It seems the virtual channels from the mipi csi-2
+		 * receiver are used only for routing by the video mux's,
+		 * or for hard-wired routing to the CSI's. Once the stream
+		 * enters the CSI's however, they are treated internally
+		 * in the IPU as virtual channel 0.
+		 */
+#if 0
+		mutex_unlock(&priv->lock);
+		vc_num = imx_media_find_mipi_csi2_channel(priv->md,
+							  &priv->sd.entity);
+		if (vc_num < 0)
+			return vc_num;
+		mutex_lock(&priv->lock);
+#endif
+		ipu_csi_set_mipi_datatype(priv->csi, vc_num,
+					  &priv->format_mbus[CSI_SINK_PAD]);
+	}
+
+	/* select either parallel or MIPI-CSI2 as input to CSI */
+	ipu_set_csi_src_mux(priv->ipu, priv->csi_id, is_csi2);
+
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int csi_eof_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->irqlock, flags);
+	csi_call_fim(priv);
+	spin_unlock_irqrestore(&priv->irqlock, flags);
+
+	return 0;
+}
+
+static int csi_try_crop(struct csi_priv *priv, struct v4l2_rect *crop,
+			struct imx_media_subdev *sensor)
+{
+	struct v4l2_of_endpoint *sensor_ep;
+	struct v4l2_mbus_framefmt *infmt;
+
+	infmt = &priv->format_mbus[CSI_SINK_PAD];
+	sensor_ep = &sensor->sensor_ep;
+
+	crop->width = min_t(__u32, infmt->width, crop->width);
+	if (crop->left + crop->width > infmt->width)
+		crop->left = infmt->width - crop->width;
+	/* adjust crop left/width to h/w alignment restrictions */
+	crop->left &= ~0x3;
+	crop->width &= ~0x7;
+
+	/*
+	 * FIXME: not sure why yet, but on interlaced bt.656,
+	 * changing the vertical cropping causes loss of vertical
+	 * sync, so fix it to NTSC/PAL active lines. NTSC contains
+	 * 2 extra lines of active video that need to be cropped.
+	 */
+	if (sensor_ep->bus_type == V4L2_MBUS_BT656 &&
+	    (V4L2_FIELD_HAS_BOTH(infmt->field) ||
+	     infmt->field == V4L2_FIELD_ALTERNATE)) {
+		crop->height = infmt->height;
+		crop->top = (infmt->height == 480) ? 2 : 0;
+	} else {
+		crop->height = min_t(__u32, infmt->height, crop->height);
+		if (crop->top + crop->height > infmt->height)
+			crop->top = infmt->height - crop->height;
+	}
+
+	return 0;
+}
+
+static int csi_enum_mbus_code(struct v4l2_subdev *sd,
+			      struct v4l2_subdev_pad_config *cfg,
+			      struct v4l2_subdev_mbus_code_enum *code)
+{
+	if (code->pad >= CSI_NUM_PADS)
+		return -EINVAL;
+
+	if (code->pad == CSI_SRC_PAD_DIRECT)
+		return imx_media_enum_ipu_format(NULL, &code->code,
+						 code->index, true);
+
+	return imx_media_enum_format(NULL, &code->code, code->index,
+				     true, false);
+}
+
+static int csi_get_fmt(struct v4l2_subdev *sd,
+		       struct v4l2_subdev_pad_config *cfg,
+		       struct v4l2_subdev_format *sdformat)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+
+	if (sdformat->pad >= CSI_NUM_PADS)
+		return -EINVAL;
+
+	mutex_lock(&priv->lock);
+
+	sdformat->format = priv->format_mbus[sdformat->pad];
+
+	mutex_unlock(&priv->lock);
+
+	return 0;
+}
+
+static int csi_set_fmt(struct v4l2_subdev *sd,
+		       struct v4l2_subdev_pad_config *cfg,
+		       struct v4l2_subdev_format *sdformat)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	const struct imx_media_pixfmt *cc, *incc;
+	struct v4l2_mbus_framefmt *infmt;
+	struct imx_media_subdev *sensor;
+	struct v4l2_rect crop;
+	int ret = 0;
+	u32 code;
+
+	if (sdformat->pad >= CSI_NUM_PADS)
+		return -EINVAL;
+
+	sensor = imx_media_find_sensor(priv->md, &priv->sd.entity);
+	if (IS_ERR(sensor)) {
+		v4l2_err(&priv->sd, "no sensor attached\n");
+		return PTR_ERR(sensor);
+	}
+
+	mutex_lock(&priv->lock);
+
+	if (priv->stream_on) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	infmt = &priv->format_mbus[CSI_SINK_PAD];
+
+	v4l_bound_align_image(&sdformat->format.width, MIN_W, MAX_W,
+			      W_ALIGN, &sdformat->format.height,
+			      MIN_H, MAX_H, H_ALIGN, S_ALIGN);
+
+	switch (sdformat->pad) {
+	case CSI_SRC_PAD_DIRECT:
+	case CSI_SRC_PAD_IDMAC:
+		crop.left = priv->crop.left;
+		crop.top = priv->crop.top;
+		crop.width = sdformat->format.width;
+		crop.height = sdformat->format.height;
+		ret = csi_try_crop(priv, &crop, sensor);
+		if (ret)
+			goto out;
+		sdformat->format.width = crop.width;
+		sdformat->format.height = crop.height;
+
+		if (sdformat->pad == CSI_SRC_PAD_IDMAC) {
+			cc = imx_media_find_format(0, sdformat->format.code,
+						   true, false);
+			if (!cc) {
+				imx_media_enum_format(NULL, &code, 0,
+						      true, false);
+				cc = imx_media_find_format(0, code,
+							   true, false);
+				sdformat->format.code = cc->codes[0];
+			}
+
+			incc = priv->cc[CSI_SINK_PAD];
+			if (cc->cs != incc->cs) {
+				sdformat->format.code = infmt->code;
+				cc = imx_media_find_format(
+					0, sdformat->format.code,
+					true, false);
+			}
+
+			if (sdformat->format.field != V4L2_FIELD_NONE)
+				sdformat->format.field = infmt->field;
+		} else {
+			cc = imx_media_find_ipu_format(0, sdformat->format.code,
+						       true);
+			if (!cc) {
+				imx_media_enum_ipu_format(NULL, &code, 0, true);
+				cc = imx_media_find_ipu_format(0, code, true);
+				sdformat->format.code = cc->codes[0];
+			}
+
+			sdformat->format.field = infmt->field;
+		}
+
+		/*
+		 * translate V4L2_FIELD_ALTERNATE to SEQ_TB or SEQ_BT
+		 * depending on input height (assume NTSC top-bottom
+		 * order if 480 lines, otherwise PAL bottom-top order).
+		 */
+		if (sdformat->format.field == V4L2_FIELD_ALTERNATE) {
+			sdformat->format.field =  (infmt->height == 480) ?
+				V4L2_FIELD_SEQ_TB : V4L2_FIELD_SEQ_BT;
+		}
+		break;
+	case CSI_SINK_PAD:
+		cc = imx_media_find_format(0, sdformat->format.code,
+					   true, false);
+		if (!cc) {
+			imx_media_enum_format(NULL, &code, 0, true, false);
+			cc = imx_media_find_format(0, code, true, false);
+			sdformat->format.code = cc->codes[0];
+		}
+		break;
+	default:
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (sdformat->which == V4L2_SUBDEV_FORMAT_TRY) {
+		cfg->try_fmt = sdformat->format;
+	} else {
+		priv->format_mbus[sdformat->pad] = sdformat->format;
+		priv->cc[sdformat->pad] = cc;
+		/* Update the crop window if this is an output pad  */
+		if (sdformat->pad == CSI_SRC_PAD_DIRECT ||
+		    sdformat->pad == CSI_SRC_PAD_IDMAC)
+			priv->crop = crop;
+	}
+
+out:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int csi_get_selection(struct v4l2_subdev *sd,
+			     struct v4l2_subdev_pad_config *cfg,
+			     struct v4l2_subdev_selection *sel)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *infmt;
+	int ret = 0;
+
+	if (sel->pad >= CSI_NUM_PADS || sel->pad == CSI_SINK_PAD)
+		return -EINVAL;
+
+	mutex_lock(&priv->lock);
+
+	infmt = &priv->format_mbus[CSI_SINK_PAD];
+
+	switch (sel->target) {
+	case V4L2_SEL_TGT_CROP_BOUNDS:
+		sel->r.left = 0;
+		sel->r.top = 0;
+		sel->r.width = infmt->width;
+		sel->r.height = infmt->height;
+		break;
+	case V4L2_SEL_TGT_CROP:
+		sel->r = priv->crop;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int csi_set_selection(struct v4l2_subdev *sd,
+			     struct v4l2_subdev_pad_config *cfg,
+			     struct v4l2_subdev_selection *sel)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *outfmt;
+	struct imx_media_subdev *sensor;
+	int ret = 0;
+
+	if (sel->pad >= CSI_NUM_PADS ||
+	    sel->pad == CSI_SINK_PAD ||
+	    sel->target != V4L2_SEL_TGT_CROP)
+		return -EINVAL;
+
+	sensor = imx_media_find_sensor(priv->md, &priv->sd.entity);
+	if (IS_ERR(sensor)) {
+		v4l2_err(&priv->sd, "no sensor attached\n");
+		return PTR_ERR(sensor);
+	}
+
+	mutex_lock(&priv->lock);
+
+	if (priv->stream_on) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	/*
+	 * Modifying the crop rectangle always changes the format on the source
+	 * pad. If the KEEP_CONFIG flag is set, just return the current crop
+	 * rectangle.
+	 */
+	if (sel->flags & V4L2_SEL_FLAG_KEEP_CONFIG) {
+		sel->r = priv->crop;
+		if (sel->which == V4L2_SUBDEV_FORMAT_TRY)
+			cfg->try_crop = sel->r;
+		goto out;
+	}
+
+	outfmt = &priv->format_mbus[sel->pad];
+
+	ret = csi_try_crop(priv, &sel->r, sensor);
+	if (ret)
+		goto out;
+
+	if (sel->which == V4L2_SUBDEV_FORMAT_TRY) {
+		cfg->try_crop = sel->r;
+	} else {
+		priv->crop = sel->r;
+		/* Update the source format */
+		outfmt->width = sel->r.width;
+		outfmt->height = sel->r.height;
+	}
+
+out:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int csi_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
+			       struct v4l2_event_subscription *sub)
+{
+	if (sub->type != V4L2_EVENT_IMX_FRAME_INTERVAL_ERROR)
+		return -EINVAL;
+	if (sub->id != 0)
+		return -EINVAL;
+
+	return v4l2_event_subscribe(fh, sub, 0, NULL);
+}
+
+static int csi_unsubscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
+				 struct v4l2_event_subscription *sub)
+{
+	return v4l2_event_unsubscribe(fh, sub);
+}
+
+/*
+ * retrieve our pads parsed from the OF graph by the media device
+ */
+static int csi_registered(struct v4l2_subdev *sd)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	int i, ret;
+	u32 code;
+
+	/* get media device */
+	priv->md = dev_get_drvdata(sd->v4l2_dev->dev);
+
+	/* get handle to IPU CSI */
+	priv->csi = ipu_csi_get(priv->ipu, priv->csi_id);
+	if (IS_ERR(priv->csi)) {
+		v4l2_err(&priv->sd, "failed to get CSI%d\n", priv->csi_id);
+		return PTR_ERR(priv->csi);
+	}
+
+	for (i = 0; i < CSI_NUM_PADS; i++) {
+		priv->pad[i].flags = (i == CSI_SINK_PAD) ?
+			MEDIA_PAD_FL_SINK : MEDIA_PAD_FL_SOURCE;
+
+		code = 0;
+		if (i == CSI_SRC_PAD_DIRECT)
+			imx_media_enum_ipu_format(NULL, &code, 0, true);
+
+		/* set a default mbus format  */
+		ret = imx_media_init_mbus_fmt(&priv->format_mbus[i],
+					      640, 480, code, V4L2_FIELD_NONE,
+					      &priv->cc[i]);
+		if (ret)
+			goto put_csi;
+	}
+
+	priv->fim = imx_media_fim_init(&priv->sd);
+	if (IS_ERR(priv->fim)) {
+		ret = PTR_ERR(priv->fim);
+		goto put_csi;
+	}
+
+	ret = media_entity_pads_init(&sd->entity, CSI_NUM_PADS, priv->pad);
+	if (ret)
+		goto free_fim;
+
+	ret = imx_media_capture_device_register(priv->vdev);
+	if (ret)
+		goto free_fim;
+
+	return 0;
+
+free_fim:
+	if (priv->fim)
+		imx_media_fim_free(priv->fim);
+put_csi:
+	ipu_csi_put(priv->csi);
+	return ret;
+}
+
+static void csi_unregistered(struct v4l2_subdev *sd)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+
+	imx_media_capture_device_unregister(priv->vdev);
+
+	if (priv->fim)
+		imx_media_fim_free(priv->fim);
+
+	if (!IS_ERR_OR_NULL(priv->csi))
+		ipu_csi_put(priv->csi);
+}
+
+static struct media_entity_operations csi_entity_ops = {
+	.link_setup = csi_link_setup,
+	.link_validate = v4l2_subdev_link_validate,
+};
+
+static struct v4l2_subdev_core_ops csi_core_ops = {
+	.s_power = csi_s_power,
+	.interrupt_service_routine = csi_eof_isr,
+	.subscribe_event = csi_subscribe_event,
+	.unsubscribe_event = csi_unsubscribe_event,
+};
+
+static struct v4l2_subdev_video_ops csi_video_ops = {
+	.s_stream = csi_s_stream,
+};
+
+static struct v4l2_subdev_pad_ops csi_pad_ops = {
+	.enum_mbus_code = csi_enum_mbus_code,
+	.get_fmt = csi_get_fmt,
+	.set_fmt = csi_set_fmt,
+	.get_selection = csi_get_selection,
+	.set_selection = csi_set_selection,
+	.link_validate = csi_link_validate,
+};
+
+static struct v4l2_subdev_ops csi_subdev_ops = {
+	.core = &csi_core_ops,
+	.video = &csi_video_ops,
+	.pad = &csi_pad_ops,
+};
+
+static struct v4l2_subdev_internal_ops csi_internal_ops = {
+	.registered = csi_registered,
+	.unregistered = csi_unregistered,
+};
+
+static int imx_csi_probe(struct platform_device *pdev)
+{
+	struct ipu_client_platformdata *pdata;
+	struct pinctrl *pinctrl;
+	struct csi_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, &priv->sd);
+	priv->dev = &pdev->dev;
+
+	ret = dma_set_coherent_mask(priv->dev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
+
+	/* get parent IPU */
+	priv->ipu = dev_get_drvdata(priv->dev->parent);
+
+	/* get our CSI id */
+	pdata = priv->dev->platform_data;
+	priv->csi_id = pdata->csi;
+	priv->smfc_id = (priv->csi_id == 0) ? 0 : 2;
+
+	init_timer(&priv->eof_timeout_timer);
+	priv->eof_timeout_timer.data = (unsigned long)priv;
+	priv->eof_timeout_timer.function = csi_idmac_eof_timeout;
+	spin_lock_init(&priv->irqlock);
+
+	v4l2_subdev_init(&priv->sd, &csi_subdev_ops);
+	v4l2_set_subdevdata(&priv->sd, priv);
+	priv->sd.internal_ops = &csi_internal_ops;
+	priv->sd.entity.ops = &csi_entity_ops;
+	priv->sd.entity.function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;
+	priv->sd.dev = &pdev->dev;
+	priv->sd.of_node = pdata->of_node;
+	priv->sd.owner = THIS_MODULE;
+	priv->sd.flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
+	priv->sd.grp_id = priv->csi_id ?
+		IMX_MEDIA_GRP_ID_CSI1 : IMX_MEDIA_GRP_ID_CSI0;
+	imx_media_grp_id_to_sd_name(priv->sd.name, sizeof(priv->sd.name),
+				    priv->sd.grp_id, ipu_get_num(priv->ipu));
+
+	priv->vdev = imx_media_capture_device_init(&priv->sd,
+						   CSI_SRC_PAD_IDMAC);
+	if (IS_ERR(priv->vdev))
+		return PTR_ERR(priv->vdev);
+
+	v4l2_ctrl_handler_init(&priv->ctrl_hdlr, 0);
+	priv->sd.ctrl_handler = &priv->ctrl_hdlr;
+
+	/*
+	 * The IPUv3 driver did not assign an of_node to this
+	 * device. As a result, pinctrl does not automatically
+	 * configure our pin groups, so we need to do that manually
+	 * here, after setting this device's of_node.
+	 */
+	priv->dev->of_node = pdata->of_node;
+	pinctrl = devm_pinctrl_get_select_default(priv->dev);
+
+	mutex_init(&priv->lock);
+
+	ret = v4l2_async_register_subdev(&priv->sd);
+	if (ret)
+		goto free;
+
+	return 0;
+free:
+	v4l2_ctrl_handler_free(&priv->ctrl_hdlr);
+	mutex_destroy(&priv->lock);
+	imx_media_capture_device_remove(priv->vdev);
+	return ret;
+}
+
+static int imx_csi_remove(struct platform_device *pdev)
+{
+	struct v4l2_subdev *sd = platform_get_drvdata(pdev);
+	struct csi_priv *priv = sd_to_dev(sd);
+
+	v4l2_ctrl_handler_free(&priv->ctrl_hdlr);
+	mutex_destroy(&priv->lock);
+	imx_media_capture_device_remove(priv->vdev);
+	v4l2_async_unregister_subdev(sd);
+	media_entity_cleanup(&sd->entity);
+
+	return 0;
+}
+
+static const struct platform_device_id imx_csi_ids[] = {
+	{ .name = "imx-ipuv3-csi" },
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, imx_csi_ids);
+
+static struct platform_driver imx_csi_driver = {
+	.probe = imx_csi_probe,
+	.remove = imx_csi_remove,
+	.id_table = imx_csi_ids,
+	.driver = {
+		.name = "imx-ipuv3-csi",
+	},
+};
+module_platform_driver(imx_csi_driver);
+
+MODULE_DESCRIPTION("i.MX CSI subdev driver");
+MODULE_AUTHOR("Steve Longerbeam <steve_longerbeam@mentor.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:imx-ipuv3-csi");
-- 
2.7.4

  parent reply	other threads:[~2017-03-28  0:42 UTC|newest]

Thread overview: 286+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-28  0:40 [PATCH v6 00/39] i.MX Media Driver Steve Longerbeam
2017-03-28  0:40 ` Steve Longerbeam
2017-03-28  0:40 ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 01/39] [media] dt-bindings: Add bindings for video-multiplexer device Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-04-03 14:14   ` Rob Herring
2017-04-03 14:14     ` Rob Herring
2017-04-03 14:14     ` Rob Herring
2017-03-28  0:40 ` [PATCH v6 02/39] [media] dt-bindings: Add bindings for i.MX media driver Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-29  0:21   ` Rob Herring
2017-03-29  0:21     ` Rob Herring
2017-03-29  0:21     ` Rob Herring
2017-03-29  0:35     ` Steve Longerbeam
2017-03-29  0:35       ` Steve Longerbeam
2017-03-29  0:35       ` Steve Longerbeam
2017-04-03 14:07       ` Rob Herring
2017-04-03 14:07         ` Rob Herring
2017-04-03 14:07         ` Rob Herring
2017-04-03 15:15         ` Russell King - ARM Linux
2017-04-03 15:15           ` Russell King - ARM Linux
2017-04-03 15:15           ` Russell King - ARM Linux
2017-03-29  8:39     ` Russell King - ARM Linux
2017-03-29  8:39       ` Russell King - ARM Linux
2017-03-29  8:39       ` Russell King - ARM Linux
2017-04-03 14:11       ` Rob Herring
2017-04-03 14:11         ` Rob Herring
2017-04-03 14:11         ` Rob Herring
2017-04-03 15:03         ` Russell King - ARM Linux
2017-04-03 15:03           ` Russell King - ARM Linux
2017-04-03 15:03           ` Russell King - ARM Linux
2017-03-28  0:40 ` [PATCH v6 03/39] [media] dt/bindings: Add bindings for OV5640 Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-04-03 14:15   ` Rob Herring
2017-04-03 14:15     ` Rob Herring
2017-04-03 14:15     ` Rob Herring
2017-03-28  0:40 ` [PATCH v6 04/39] ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 05/39] ARM: dts: imx6qdl: Add mipi_ipu1/2 multiplexers, mipi_csi, and their connections Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 06/39] ARM: dts: imx6qdl: add capture-subsystem device Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 07/39] ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 08/39] ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 09/39] ARM: dts: imx6-sabresd: " Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 10/39] ARM: dts: imx6-sabreauto: create i2cmux for i2c3 Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 11/39] ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 12/39] ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 13/39] ARM: dts: imx6-sabreauto: add the ADV7180 video decoder Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 14/39] add mux and video interface bridge entity functions Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 15/39] [media] v4l2-mc: add a function to inherit controls from a pipeline Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 16/39] [media] add Omnivision OV5640 sensor driver Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 17/39] platform: add video-multiplexer subdevice driver Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28 14:12   ` Vladimir Zapolskiy
2017-03-28 14:12     ` Vladimir Zapolskiy
2017-03-28 14:12     ` Vladimir Zapolskiy
2017-04-04 12:47   ` Sakari Ailus
2017-04-04 12:47     ` Sakari Ailus
2017-04-04 12:47     ` Sakari Ailus
2017-04-12  0:50     ` Steve Longerbeam
2017-04-12  0:50       ` Steve Longerbeam
2017-04-12  0:50       ` Steve Longerbeam
2017-04-12  9:09       ` Sakari Ailus
2017-04-12  9:09         ` Sakari Ailus
2017-04-12  9:09         ` Sakari Ailus
2017-04-13 13:52     ` Philipp Zabel
2017-04-13 13:52       ` Philipp Zabel
2017-04-13 13:52       ` Philipp Zabel
2017-04-14 20:32       ` Pavel Machek
2017-04-14 20:32         ` Pavel Machek
2017-04-14 20:32         ` Pavel Machek
2017-04-18  8:09         ` Philipp Zabel
2017-04-18  8:09           ` Philipp Zabel
2017-04-18  8:09           ` Philipp Zabel
2017-04-18  9:05           ` Pavel Machek
2017-04-18  9:05             ` Pavel Machek
2017-04-18  9:05             ` Pavel Machek
2017-04-05 11:18   ` Pavel Machek
2017-04-05 11:18     ` Pavel Machek
2017-04-05 11:18     ` Pavel Machek
2017-04-05 11:58     ` Lucas Stach
2017-04-05 11:58       ` Lucas Stach
2017-04-05 11:58       ` Lucas Stach
2017-04-05 18:05       ` Pavel Machek
2017-04-05 18:05         ` Pavel Machek
2017-04-05 18:05         ` Pavel Machek
2017-03-28  0:40 ` [PATCH v6 18/39] media: Add userspace header file for i.MX Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 19/39] media: Add i.MX media core driver Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-30 17:25   ` [RFC] [media] imx: assume MEDIA_ENT_F_ATV_DECODER entities output video on pad 1 Philipp Zabel
2017-03-30 17:25     ` Philipp Zabel
2017-04-04 22:11     ` Steve Longerbeam
2017-04-04 22:11       ` Steve Longerbeam
2017-04-04 22:11       ` Steve Longerbeam
2017-04-05  9:43       ` Philipp Zabel
2017-04-05  9:43         ` Philipp Zabel
2017-04-05  9:43         ` Philipp Zabel
2017-04-04 23:10     ` Russell King - ARM Linux
2017-04-04 23:10       ` Russell King - ARM Linux
2017-04-04 23:10       ` Russell King - ARM Linux
2017-04-05  0:40       ` Steve Longerbeam
2017-04-05  0:40         ` Steve Longerbeam
2017-04-05  0:40         ` Steve Longerbeam
2017-04-05  0:44         ` Steve Longerbeam
2017-04-05  0:44           ` Steve Longerbeam
2017-04-05  0:44           ` Steve Longerbeam
2017-04-05  8:21           ` Russell King - ARM Linux
2017-04-05  8:21             ` Russell King - ARM Linux
2017-04-05  8:21             ` Russell King - ARM Linux
2017-04-05  9:34             ` Philipp Zabel
2017-04-05  9:34               ` Philipp Zabel
2017-04-05  9:34               ` Philipp Zabel
2017-04-05 13:55               ` Javier Martinez Canillas
2017-04-05 13:55                 ` Javier Martinez Canillas
2017-04-05 13:55                 ` Javier Martinez Canillas
2017-04-05 13:55                 ` Javier Martinez Canillas
2017-04-05 14:53               ` Mauro Carvalho Chehab
2017-04-05 14:53                 ` Mauro Carvalho Chehab
2017-04-05 14:53                 ` Mauro Carvalho Chehab
2017-04-05 15:39                 ` Devin Heitmueller
2017-04-05 15:39                   ` Devin Heitmueller
2017-04-05 15:39                   ` Devin Heitmueller
2017-04-05 16:17                   ` Mauro Carvalho Chehab
2017-04-05 16:17                     ` Mauro Carvalho Chehab
2017-04-05 16:17                     ` Mauro Carvalho Chehab
2017-04-05 17:02                     ` Devin Heitmueller
2017-04-05 17:02                       ` Devin Heitmueller
2017-04-05 17:02                       ` Devin Heitmueller
2017-04-05 17:16                       ` Mauro Carvalho Chehab
2017-04-05 17:16                         ` Mauro Carvalho Chehab
2017-04-05 17:16                         ` Mauro Carvalho Chehab
2017-04-06  9:57                 ` Philipp Zabel
2017-04-06  9:57                   ` Philipp Zabel
2017-04-06  9:57                   ` Philipp Zabel
2017-04-05 11:32   ` [PATCH v6 19/39] media: Add i.MX media core driver Pavel Machek
2017-04-05 11:32     ` Pavel Machek
2017-04-05 11:32     ` Pavel Machek
2017-04-05 11:34   ` Pavel Machek
2017-04-05 11:34     ` Pavel Machek
2017-04-05 11:34     ` Pavel Machek
2017-04-06  9:43   ` Philipp Zabel
2017-04-06  9:43     ` Philipp Zabel
2017-04-06  9:43     ` Philipp Zabel
2017-04-06 23:51     ` Steve Longerbeam
2017-04-06 23:51       ` Steve Longerbeam
2017-04-06 23:51       ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 20/39] media: imx: Add Capture Device Interface Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` Steve Longerbeam [this message]
2017-03-28  0:40   ` [PATCH v6 21/39] media: imx: Add CSI subdev driver Steve Longerbeam
2017-04-06 13:55   ` [PATCH] [media] imx: csi: retain current field order and colorimetry setting as default Philipp Zabel
2017-04-06 13:55     ` Philipp Zabel
2017-04-06 13:55     ` Philipp Zabel
2017-04-06 14:05     ` Russell King - ARM Linux
2017-04-06 14:05       ` Russell King - ARM Linux
2017-04-06 14:05       ` Russell King - ARM Linux
2017-04-06 15:01       ` Philipp Zabel
2017-04-06 15:01         ` Philipp Zabel
2017-04-06 15:01         ` Philipp Zabel
2017-04-06 15:10         ` Russell King - ARM Linux
2017-04-06 15:10           ` Russell King - ARM Linux
2017-04-06 15:10           ` Russell King - ARM Linux
2017-04-06 15:25           ` Philipp Zabel
2017-04-06 15:25             ` Philipp Zabel
2017-04-06 15:25             ` Philipp Zabel
2017-04-13  0:33             ` Steve Longerbeam
2017-04-13  0:33               ` Steve Longerbeam
2017-04-13  0:33               ` Steve Longerbeam
2017-04-13  0:45               ` [PATCH 40/40] media: imx: set and propagate empty field, colorimetry params Steve Longerbeam
2017-04-13 10:09                 ` Philipp Zabel
2017-04-13 16:40                   ` Steve Longerbeam
2017-04-18  9:30                     ` Philipp Zabel
2017-05-08  9:41                 ` Philipp Zabel
2017-05-09  3:44                   ` Steve Longerbeam
2017-04-06 14:20     ` [PATCH] [media] imx: csi: retain current field order and colorimetry setting as default Hans Verkuil
2017-04-06 14:20       ` Hans Verkuil
2017-04-06 14:20       ` Hans Verkuil
2017-04-06 14:38       ` Russell King - ARM Linux
2017-04-06 14:38         ` Russell King - ARM Linux
2017-04-06 14:38         ` Russell King - ARM Linux
2017-04-06 14:54       ` Philipp Zabel
2017-04-06 14:54         ` Philipp Zabel
2017-04-06 14:54         ` Philipp Zabel
2017-04-06 15:43         ` Hans Verkuil
2017-04-06 15:43           ` Hans Verkuil
2017-04-06 15:43           ` Hans Verkuil
2017-04-06 16:01           ` Philipp Zabel
2017-04-06 16:01             ` Philipp Zabel
2017-04-06 16:01             ` Philipp Zabel
2017-04-12  7:03             ` Hans Verkuil
2017-04-12  7:03               ` Hans Verkuil
2017-04-12  7:03               ` Hans Verkuil
2017-04-13 10:07               ` Philipp Zabel
2017-04-13 10:07                 ` Philipp Zabel
2017-04-13 10:07                 ` Philipp Zabel
2017-04-06 15:18       ` Philipp Zabel
2017-04-06 15:18         ` Philipp Zabel
2017-04-06 15:18         ` Philipp Zabel
2017-05-08  8:27     ` Hans Verkuil
2017-05-08  8:27       ` Hans Verkuil
2017-05-08  8:27       ` Hans Verkuil
2017-05-08  9:36       ` Philipp Zabel
2017-05-08  9:36         ` Philipp Zabel
2017-05-08  9:36         ` Philipp Zabel
2017-05-08 10:12         ` Hans Verkuil
2017-05-08 10:12           ` Hans Verkuil
2017-05-08 10:12           ` Hans Verkuil
2017-03-28  0:40 ` [PATCH v6 22/39] media: imx: Add VDIC subdev driver Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 23/39] media: imx: Add IC subdev drivers Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 24/39] media: imx: Add MIPI CSI-2 Receiver subdev driver Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 25/39] ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 26/39] media: imx: add support for bayer formats Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 27/39] media: imx: csi: " Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 28/39] media: imx: csi: fix crop rectangle changes in set_fmt Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 29/39] media: imx: csi: add __csi_get_fmt Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 30/39] media: imx: csi/fim: add support for frame intervals Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 31/39] media: imx: redo pixel format enumeration and negotiation Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 32/39] media: imx: csi: add frame skipping support Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 33/39] media: imx: csi: Avoid faulty sensor frames at stream start Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 34/39] media: imx: csi: fix crop rectangle reset in sink set_fmt Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 35/39] media: imx: propagate sink pad formats to source pads Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 36/39] media: imx: csi: add sink selection rectangles Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 37/39] media: imx-csi: add frame size/interval enumeration Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 38/39] media: imx-ic-prpencvf: add frame size enumeration Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-28  0:40 ` [PATCH v6 39/39] media: imx-media-capture: add frame sizes/interval enumeration Steve Longerbeam
2017-03-28  0:40   ` Steve Longerbeam
2017-03-30 11:02 ` [PATCH v6 00/39] i.MX Media Driver Russell King - ARM Linux
2017-03-30 11:02   ` Russell King - ARM Linux
2017-03-30 11:02   ` Russell King - ARM Linux
2017-03-30 16:12   ` Steve Longerbeam
2017-03-30 16:12     ` Steve Longerbeam
2017-03-30 16:12     ` Steve Longerbeam
2017-03-30 16:27     ` Russell King - ARM Linux
2017-03-30 16:27       ` Russell King - ARM Linux
2017-03-30 16:27       ` Russell King - ARM Linux

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1490661656-10318-22-git-send-email-steve_longerbeam@mentor.com \
    --to=slongerbeam@gmail.com \
    --cc=andrew-ct.chen@mediatek.com \
    --cc=arnd@arndb.de \
    --cc=bparrot@ti.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=devicetree@vger.kernel.org \
    --cc=fabio.estevam@nxp.com \
    --cc=geert@linux-m68k.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=horms+renesas@verge.net.au \
    --cc=hverkuil@xs4all.nl \
    --cc=jean-christophe.trotin@st.com \
    --cc=kernel@pengutronix.de \
    --cc=laurent.pinchart+renesas@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=markus.heiser@darmarIT.de \
    --cc=mchehab@kernel.org \
    --cc=minghsiu.tsai@mediatek.com \
    --cc=nick@shmanahar.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    --cc=p.zabel@pengutronix.de \
    --cc=pavel@ucw.cz \
    --cc=robert.jarzmik@free.fr \
    --cc=robh+dt@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    --cc=shawnguo@kernel.org \
    --cc=shuah@kernel.org \
    --cc=songjun.wu@microchip.com \
    --cc=steve_longerbeam@mentor.com \
    --cc=sudipm.mukherjee@gmail.com \
    --cc=tiffany.lin@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.