* [PATCH v2] usb: dwc2: Make sure we disconnect the gadget state
@ 2017-03-30 3:23 John Stultz
2017-04-03 1:59 ` John Youn
0 siblings, 1 reply; 2+ messages in thread
From: John Stultz @ 2017-03-30 3:23 UTC (permalink / raw)
To: lkml
Cc: John Stultz, Wei Xu, Guodong Xu, Amit Pundir, Rob Herring,
John Youn, Douglas Anderson, Chen Yu, Felipe Balbi,
Greg Kroah-Hartman, linux-usb
I had seen some odd behavior with HiKey's usb-gadget interface
that I finally seemed to have chased down. Basically every other
time I plugged in the OTG port, the gadget interface would
properly initialize. The other times, I'd get a big WARN_ON
in dwc2_hsotg_init_fifo() about the fifo_map not being clear.
Ends up if we don't disconnect the gadget state, the fifo-map
doesn't get cleared properly, which causes WARN_ON messages and
also results in the device not properly being setup as a gadget
every other time the OTG port is connected.
So this patch adds a call to dwc2_hsotg_disconnect() in the
reset path so the state is properly cleared.
With it, the gadget interface initializes properly on every
plug in.
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: John Youn <johnyoun@synopsys.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Chen Yu <chenyu56@huawei.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
v2: Minor typo fix suggested by Sergei Shtylyov
---
drivers/usb/dwc2/hcd.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index a73722e..91ed5b6 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -3264,6 +3264,7 @@ static void dwc2_conn_id_status_change(struct work_struct *work)
dwc2_core_init(hsotg, false);
dwc2_enable_global_interrupts(hsotg);
spin_lock_irqsave(&hsotg->lock, flags);
+ dwc2_hsotg_disconnect(hsotg);
dwc2_hsotg_core_init_disconnected(hsotg, false);
spin_unlock_irqrestore(&hsotg->lock, flags);
dwc2_hsotg_core_connect(hsotg);
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v2] usb: dwc2: Make sure we disconnect the gadget state
2017-03-30 3:23 [PATCH v2] usb: dwc2: Make sure we disconnect the gadget state John Stultz
@ 2017-04-03 1:59 ` John Youn
0 siblings, 0 replies; 2+ messages in thread
From: John Youn @ 2017-04-03 1:59 UTC (permalink / raw)
To: John Stultz, lkml
Cc: Wei Xu, Guodong Xu, Amit Pundir, Rob Herring, John Youn,
Douglas Anderson, Chen Yu, Felipe Balbi, Greg Kroah-Hartman,
linux-usb
On 03/29/2017 08:23 PM, John Stultz wrote:
> I had seen some odd behavior with HiKey's usb-gadget interface
> that I finally seemed to have chased down. Basically every other
> time I plugged in the OTG port, the gadget interface would
> properly initialize. The other times, I'd get a big WARN_ON
> in dwc2_hsotg_init_fifo() about the fifo_map not being clear.
>
> Ends up if we don't disconnect the gadget state, the fifo-map
> doesn't get cleared properly, which causes WARN_ON messages and
> also results in the device not properly being setup as a gadget
> every other time the OTG port is connected.
>
> So this patch adds a call to dwc2_hsotg_disconnect() in the
> reset path so the state is properly cleared.
>
> With it, the gadget interface initializes properly on every
> plug in.
>
> Cc: Wei Xu <xuwei5@hisilicon.com>
> Cc: Guodong Xu <guodong.xu@linaro.org>
> Cc: Amit Pundir <amit.pundir@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: John Youn <johnyoun@synopsys.com>
> Cc: Douglas Anderson <dianders@chromium.org>
> Cc: Chen Yu <chenyu56@huawei.com>
> Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-usb@vger.kernel.org
> Acked-by: John Youn <johnyoun@synopsys.com>
> Signed-off-by: John Stultz <john.stultz@linaro.org>
> ---
> v2: Minor typo fix suggested by Sergei Shtylyov
> ---
> drivers/usb/dwc2/hcd.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
> index a73722e..91ed5b6 100644
> --- a/drivers/usb/dwc2/hcd.c
> +++ b/drivers/usb/dwc2/hcd.c
> @@ -3264,6 +3264,7 @@ static void dwc2_conn_id_status_change(struct work_struct *work)
> dwc2_core_init(hsotg, false);
> dwc2_enable_global_interrupts(hsotg);
> spin_lock_irqsave(&hsotg->lock, flags);
> + dwc2_hsotg_disconnect(hsotg);
> dwc2_hsotg_core_init_disconnected(hsotg, false);
> spin_unlock_irqrestore(&hsotg->lock, flags);
> dwc2_hsotg_core_connect(hsotg);
>
Hi Felipe,
You may want to use this patch to replace the one in your testing/next
as this has a cleaner commit message.
Thanks,
John
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-04-03 2:01 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-03-30 3:23 [PATCH v2] usb: dwc2: Make sure we disconnect the gadget state John Stultz
2017-04-03 1:59 ` John Youn
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.