All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hugues Fruchet <hugues.fruchet@st.com>
To: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Hans Verkuil <hverkuil@xs4all.nl>
Cc: <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <linux-media@vger.kernel.org>,
	Benjamin Gaignard <benjamin.gaignard@linaro.org>,
	Yannick Fertre <yannick.fertre@st.com>,
	Hugues Fruchet <hugues.fruchet@st.com>
Subject: [PATCH v2 6/8] ARM: dts: stm32: Enable OV2640 camera support of STM32F429-EVAL board
Date: Thu, 30 Mar 2017 17:27:45 +0200	[thread overview]
Message-ID: <1490887667-8880-7-git-send-email-hugues.fruchet@st.com> (raw)
In-Reply-To: <1490887667-8880-1-git-send-email-hugues.fruchet@st.com>

Enable OV2640 camera support of STM32F429-EVAL board.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
 arch/arm/boot/dts/stm32429i-eval.dts | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 7ffcf07..b7d127c 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -48,6 +48,7 @@
 /dts-v1/;
 #include "stm32f429.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "STMicroelectronics STM32429i-EVAL board";
@@ -66,6 +67,14 @@
 		serial0 = &usart1;
 	};
 
+	clocks {
+		clk_ext_camera: clk-ext-camera {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
 	soc {
 		dma-ranges = <0xc0000000 0x0 0x10000000>;
 	};
@@ -146,6 +155,11 @@
 
 	port {
 		dcmi_0: endpoint@0 {
+			remote-endpoint = <&ov2640_0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pclk-sample = <1>;
 		};
 	};
 };
@@ -155,6 +169,22 @@
 	pinctrl-names = "default";
 	status = "okay";
 
+	ov2640: camera@30 {
+		compatible = "ovti,ov2640";
+		reg = <0x30>;
+		resetb-gpios = <&stmpegpio 2 GPIO_ACTIVE_HIGH>;
+		pwdn-gpios = <&stmpegpio 0 GPIO_ACTIVE_LOW>;
+		clocks = <&clk_ext_camera>;
+		clock-names = "xvclk";
+		status = "okay";
+
+		port {
+			ov2640_0: endpoint {
+				remote-endpoint = <&dcmi_0>;
+			};
+		};
+	};
+
 	stmpe1600: stmpe1600@42 {
 		compatible = "st,stmpe1600";
 		reg = <0x42>;
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Hugues Fruchet <hugues.fruchet@st.com>
To: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Hans Verkuil <hverkuil@xs4all.nl>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
	Benjamin Gaignard <benjamin.gaignard@linaro.org>,
	Yannick Fertre <yannick.fertre@st.com>,
	Hugues Fruchet <hugues.fruchet@st.com>
Subject: [PATCH v2 6/8] ARM: dts: stm32: Enable OV2640 camera support of STM32F429-EVAL board
Date: Thu, 30 Mar 2017 17:27:45 +0200	[thread overview]
Message-ID: <1490887667-8880-7-git-send-email-hugues.fruchet@st.com> (raw)
In-Reply-To: <1490887667-8880-1-git-send-email-hugues.fruchet@st.com>

Enable OV2640 camera support of STM32F429-EVAL board.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
 arch/arm/boot/dts/stm32429i-eval.dts | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 7ffcf07..b7d127c 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -48,6 +48,7 @@
 /dts-v1/;
 #include "stm32f429.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "STMicroelectronics STM32429i-EVAL board";
@@ -66,6 +67,14 @@
 		serial0 = &usart1;
 	};
 
+	clocks {
+		clk_ext_camera: clk-ext-camera {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
 	soc {
 		dma-ranges = <0xc0000000 0x0 0x10000000>;
 	};
@@ -146,6 +155,11 @@
 
 	port {
 		dcmi_0: endpoint@0 {
+			remote-endpoint = <&ov2640_0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pclk-sample = <1>;
 		};
 	};
 };
@@ -155,6 +169,22 @@
 	pinctrl-names = "default";
 	status = "okay";
 
+	ov2640: camera@30 {
+		compatible = "ovti,ov2640";
+		reg = <0x30>;
+		resetb-gpios = <&stmpegpio 2 GPIO_ACTIVE_HIGH>;
+		pwdn-gpios = <&stmpegpio 0 GPIO_ACTIVE_LOW>;
+		clocks = <&clk_ext_camera>;
+		clock-names = "xvclk";
+		status = "okay";
+
+		port {
+			ov2640_0: endpoint {
+				remote-endpoint = <&dcmi_0>;
+			};
+		};
+	};
+
 	stmpe1600: stmpe1600@42 {
 		compatible = "st,stmpe1600";
 		reg = <0x42>;
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: hugues.fruchet@st.com (Hugues Fruchet)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 6/8] ARM: dts: stm32: Enable OV2640 camera support of STM32F429-EVAL board
Date: Thu, 30 Mar 2017 17:27:45 +0200	[thread overview]
Message-ID: <1490887667-8880-7-git-send-email-hugues.fruchet@st.com> (raw)
In-Reply-To: <1490887667-8880-1-git-send-email-hugues.fruchet@st.com>

Enable OV2640 camera support of STM32F429-EVAL board.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
 arch/arm/boot/dts/stm32429i-eval.dts | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 7ffcf07..b7d127c 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -48,6 +48,7 @@
 /dts-v1/;
 #include "stm32f429.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "STMicroelectronics STM32429i-EVAL board";
@@ -66,6 +67,14 @@
 		serial0 = &usart1;
 	};
 
+	clocks {
+		clk_ext_camera: clk-ext-camera {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
 	soc {
 		dma-ranges = <0xc0000000 0x0 0x10000000>;
 	};
@@ -146,6 +155,11 @@
 
 	port {
 		dcmi_0: endpoint at 0 {
+			remote-endpoint = <&ov2640_0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pclk-sample = <1>;
 		};
 	};
 };
@@ -155,6 +169,22 @@
 	pinctrl-names = "default";
 	status = "okay";
 
+	ov2640: camera at 30 {
+		compatible = "ovti,ov2640";
+		reg = <0x30>;
+		resetb-gpios = <&stmpegpio 2 GPIO_ACTIVE_HIGH>;
+		pwdn-gpios = <&stmpegpio 0 GPIO_ACTIVE_LOW>;
+		clocks = <&clk_ext_camera>;
+		clock-names = "xvclk";
+		status = "okay";
+
+		port {
+			ov2640_0: endpoint {
+				remote-endpoint = <&dcmi_0>;
+			};
+		};
+	};
+
 	stmpe1600: stmpe1600 at 42 {
 		compatible = "st,stmpe1600";
 		reg = <0x42>;
-- 
1.9.1

  parent reply	other threads:[~2017-03-30 15:29 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-30 15:27 [PATCH v2 0/8] Add support for DCMI camera interface of STMicroelectronics STM32 SoC series Hugues Fruchet
2017-03-30 15:27 ` Hugues Fruchet
2017-03-30 15:27 ` Hugues Fruchet
2017-03-30 15:27 ` [PATCH v2 1/8] dt-bindings: Document STM32 DCMI bindings Hugues Fruchet
2017-03-30 15:27   ` Hugues Fruchet
2017-03-30 15:27   ` Hugues Fruchet
2017-04-03 16:23   ` Rob Herring
2017-04-03 16:23     ` Rob Herring
2017-04-03 16:23     ` Rob Herring
2017-04-04 15:45     ` Hugues FRUCHET
2017-04-04 15:45       ` Hugues FRUCHET
2017-04-04 15:45       ` Hugues FRUCHET
2017-04-04 15:45       ` Hugues FRUCHET
2017-03-30 15:27 ` [PATCH v2 2/8] [media] stm32-dcmi: STM32 DCMI camera interface driver Hugues Fruchet
2017-03-30 15:27   ` Hugues Fruchet
2017-03-30 15:27   ` Hugues Fruchet
2017-04-03 10:37   ` Hans Verkuil
2017-04-03 10:37     ` Hans Verkuil
2017-03-30 15:27 ` [PATCH v2 3/8] ARM: dts: stm32: Enable DCMI support on STM32F429 MCU Hugues Fruchet
2017-03-30 15:27   ` Hugues Fruchet
2017-03-30 15:27   ` Hugues Fruchet
2017-03-30 15:27 ` [PATCH v2 4/8] ARM: dts: stm32: Enable DCMI camera interface on STM32F429-EVAL board Hugues Fruchet
2017-03-30 15:27   ` Hugues Fruchet
2017-03-30 15:27   ` Hugues Fruchet
2017-03-30 15:27 ` [PATCH v2 5/8] ARM: dts: stm32: Enable STMPE1600 gpio expander of " Hugues Fruchet
2017-03-30 15:27   ` Hugues Fruchet
2017-03-30 15:27   ` Hugues Fruchet
2017-03-30 15:27 ` Hugues Fruchet [this message]
2017-03-30 15:27   ` [PATCH v2 6/8] ARM: dts: stm32: Enable OV2640 camera support " Hugues Fruchet
2017-03-30 15:27   ` Hugues Fruchet
2017-03-30 15:27 ` [PATCH v2 7/8] ARM: configs: stm32: STMPE1600 GPIO expander Hugues Fruchet
2017-03-30 15:27   ` Hugues Fruchet
2017-03-30 15:27   ` Hugues Fruchet
2017-03-30 15:27 ` [PATCH v2 8/8] ARM: configs: stm32: DCMI + OV2640 camera support Hugues Fruchet
2017-03-30 15:27   ` Hugues Fruchet
2017-03-30 15:27   ` Hugues Fruchet

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1490887667-8880-7-git-send-email-hugues.fruchet@st.com \
    --to=hugues.fruchet@st.com \
    --cc=alexandre.torgue@st.com \
    --cc=benjamin.gaignard@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=hverkuil@xs4all.nl \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mchehab@kernel.org \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=yannick.fertre@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.