All of lore.kernel.org
 help / color / mirror / Atom feed
From: Amit Pundir <amit.pundir@linaro.org>
To: gregkh@linuxfoundation.org
Cc: stable@vger.kernel.org, Tobias Klauser <tklauser@distanz.ch>,
	Kalle Valo <kvalo@codeaurora.org>
Subject: [PATCH 31/33] brcmfmac: Use net_device_stats from struct net_device
Date: Tue,  4 Apr 2017 11:48:37 +0530	[thread overview]
Message-ID: <1491286719-31388-2-git-send-email-amit.pundir@linaro.org> (raw)
In-Reply-To: <1491286719-31388-1-git-send-email-amit.pundir@linaro.org>

From: Tobias Klauser <tklauser@distanz.ch>

Instead of using a private copy of struct net_device_stats in struct
brcm_if, use stats from struct net_device.  Also remove the now
unnecessary .ndo_get_stats function.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
(cherry picked from commit 91b632803ee4e47c5a5c4dc3d8bf5abf9c16107a)
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
---
 .../wireless/broadcom/brcm80211/brcmfmac/core.c    | 26 +++++++---------------
 .../wireless/broadcom/brcm80211/brcmfmac/core.h    |  2 --
 2 files changed, 8 insertions(+), 20 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
index 5eaac13..cf1ae5a 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -243,10 +243,10 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb,
 
 done:
 	if (ret) {
-		ifp->stats.tx_dropped++;
+		ndev->stats.tx_dropped++;
 	} else {
-		ifp->stats.tx_packets++;
-		ifp->stats.tx_bytes += skb->len;
+		ndev->stats.tx_packets++;
+		ndev->stats.tx_bytes += skb->len;
 	}
 
 	/* Return ok: we always eat the packet */
@@ -290,15 +290,15 @@ void brcmf_txflowblock(struct device *dev, bool state)
 void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb)
 {
 	if (skb->pkt_type == PACKET_MULTICAST)
-		ifp->stats.multicast++;
+		ifp->ndev->stats.multicast++;
 
 	if (!(ifp->ndev->flags & IFF_UP)) {
 		brcmu_pkt_buf_free_skb(skb);
 		return;
 	}
 
-	ifp->stats.rx_bytes += skb->len;
-	ifp->stats.rx_packets++;
+	ifp->ndev->stats.rx_bytes += skb->len;
+	ifp->ndev->stats.rx_packets++;
 
 	brcmf_dbg(DATA, "rx proto=0x%X\n", ntohs(skb->protocol));
 	if (in_interrupt())
@@ -321,7 +321,7 @@ static int brcmf_rx_hdrpull(struct brcmf_pub *drvr, struct sk_buff *skb,
 
 	if (ret || !(*ifp) || !(*ifp)->ndev) {
 		if (ret != -ENODATA && *ifp)
-			(*ifp)->stats.rx_errors++;
+			(*ifp)->ndev->stats.rx_errors++;
 		brcmu_pkt_buf_free_skb(skb);
 		return -ENODATA;
 	}
@@ -382,7 +382,7 @@ void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success)
 	}
 
 	if (!success)
-		ifp->stats.tx_errors++;
+		ifp->ndev->stats.tx_errors++;
 
 	brcmu_pkt_buf_free_skb(txp);
 }
@@ -405,15 +405,6 @@ void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success)
 	}
 }
 
-static struct net_device_stats *brcmf_netdev_get_stats(struct net_device *ndev)
-{
-	struct brcmf_if *ifp = netdev_priv(ndev);
-
-	brcmf_dbg(TRACE, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx);
-
-	return &ifp->stats;
-}
-
 static void brcmf_ethtool_get_drvinfo(struct net_device *ndev,
 				    struct ethtool_drvinfo *info)
 {
@@ -486,7 +477,6 @@ static int brcmf_netdev_open(struct net_device *ndev)
 static const struct net_device_ops brcmf_netdev_ops_pri = {
 	.ndo_open = brcmf_netdev_open,
 	.ndo_stop = brcmf_netdev_stop,
-	.ndo_get_stats = brcmf_netdev_get_stats,
 	.ndo_start_xmit = brcmf_netdev_start_xmit,
 	.ndo_set_mac_address = brcmf_netdev_set_mac_address,
 	.ndo_set_rx_mode = brcmf_netdev_set_multicast_list
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
index c94dcab..397c912 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
@@ -171,7 +171,6 @@ enum brcmf_netif_stop_reason {
  * @drvr: points to device related information.
  * @vif: points to cfg80211 specific interface information.
  * @ndev: associated network device.
- * @stats: interface specific network statistics.
  * @multicast_work: worker object for multicast provisioning.
  * @ndoffload_work: worker object for neighbor discovery offload configuration.
  * @fws_desc: interface specific firmware-signalling descriptor.
@@ -187,7 +186,6 @@ struct brcmf_if {
 	struct brcmf_pub *drvr;
 	struct brcmf_cfg80211_vif *vif;
 	struct net_device *ndev;
-	struct net_device_stats stats;
 	struct work_struct multicast_work;
 	struct work_struct ndoffload_work;
 	struct brcmf_fws_mac_descriptor *fws_desc;
-- 
2.7.4

  reply	other threads:[~2017-04-04  6:18 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-04  6:18 [PATCH 30/33] rt2x00usb: fix anchor initialization Amit Pundir
2017-04-04  6:18 ` Amit Pundir [this message]
2017-04-04  6:18 ` [PATCH 32/33] rt2x00: Fix incorrect usage of CONFIG_RT2X00_LIB_USB Amit Pundir
2017-04-04  6:18 ` [PATCH 33/33] rt2x00: avoid introducing a USB dependency in the rt2x00lib module Amit Pundir

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1491286719-31388-2-git-send-email-amit.pundir@linaro.org \
    --to=amit.pundir@linaro.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=kvalo@codeaurora.org \
    --cc=stable@vger.kernel.org \
    --cc=tklauser@distanz.ch \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.