All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vikas Manocha <vikas.manocha@st.com>
To: <alexandre.torgue@st.com>, <patrice.chotard@st.com>
Cc: Vikas Manocha <vikas.manocha@st.com>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
	<devicetree@vger.kernel.org>,
	"moderated list:ARM PORT" <linux-arm-kernel@lists.infradead.org>,
	open list <linux-kernel@vger.kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Russell King <linux@armlinux.org.uk>
Subject: [PATCH] ARM: dts: stm32f7: add STM32f769I & stm32f746 discovery board support
Date: Fri, 7 Apr 2017 18:12:07 -0700	[thread overview]
Message-ID: <1491613929-11485-1-git-send-email-vikas.manocha@st.com> (raw)

Stm32f769I & stm32f746 are MCUs of stm32f7 family. Here are the major
spces of the two boards:

stm32f769I discovery board:
	- Cortex-M7 core @216MHz
	- 2MB mcu internal flash
	- 512KB internal sram
	- 16MB sdram memory
	- 64MB qspi flash memory
	- 4 inch wvga LCD-TFT Display

stm32f746 discovery board:
	- Cortex-M7 core @216MHz
	- 1MB mcu internal flash
	- 320KB internal sram
	- 8MB sdram memory
	- 16MB qspi flash memory
	- 4.3 inch 480x272 LCD-TFT display

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
---
 arch/arm/boot/dts/Makefile            |   2 +
 arch/arm/boot/dts/stm32f746-disco.dts | 101 ++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/stm32f746.dtsi      |   2 +-
 arch/arm/boot/dts/stm32f769-disco.dts | 101 ++++++++++++++++++++++++++++++++++
 4 files changed, 205 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/stm32f746-disco.dts
 create mode 100644 arch/arm/boot/dts/stm32f769-disco.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 0118084..a119f74 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -763,6 +763,8 @@ dtb-$(CONFIG_ARCH_STI) += \
 dtb-$(CONFIG_ARCH_STM32)+= \
 	stm32f429-disco.dtb \
 	stm32f469-disco.dtb \
+	stm32f746-disco.dtb \
+	stm32f769-disco.dtb \
 	stm32429i-eval.dtb \
 	stm32746g-eval.dtb
 dtb-$(CONFIG_MACH_SUN4I) += \
diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts
new file mode 100644
index 0000000..c0e313f
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f746-disco.dts
@@ -0,0 +1,101 @@
+/*
+ * Copyright 2017 - Vikas MANOCHA <vikas.manocha@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f746.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "STMicroelectronics STM32F746-DISCO board";
+	compatible = "st,stm32f746-disco", "st,stm32f746";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0xC0000000 0x800000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&pinctrl {
+	usart1_pins: usart1@0	{
+		pins1 {
+			pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
+				bias-disable;
+				drive-push-pull;
+				slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32F746_PB7_FUNC_USART1_RX>;
+			bias-disable;
+		};
+	};
+
+	qspi_pins: qspi@0 {
+		pins {
+			pinmux = <STM32F746_PB2_FUNC_QUADSPI_CLK>,
+			       <STM32F746_PB6_FUNC_QUADSPI_BK1_NCS>,
+			       <STM32F746_PD11_FUNC_QUADSPI_BK1_IO0>,
+			       <STM32F746_PD12_FUNC_QUADSPI_BK1_IO1>,
+			       <STM32F746_PD13_FUNC_QUADSPI_BK1_IO3>,
+			       <STM32F746_PE2_FUNC_QUADSPI_BK1_IO2>;
+			slew-rate = <2>;
+		};
+	};
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index f321ffe..826700f 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -178,7 +178,7 @@
 			interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
 		};
 
-		pin-controller {
+		pinctrl: pin-controller {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "st,stm32f746-pinctrl";
diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts
new file mode 100644
index 0000000..5f8558e
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f769-disco.dts
@@ -0,0 +1,101 @@
+/*
+ * Copyright 2017 - Vikas MANOCHA <vikas.manocha@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f746.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "STMicroelectronics STM32F769-DISCO board";
+	compatible = "st,stm32f769-disco", "st,stm32f7";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0xC0000000 0x1000000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&pinctrl {
+	usart1_pins: usart1@0	{
+		pins1 {
+			pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
+				bias-disable;
+				drive-push-pull;
+				slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32F746_PA10_FUNC_USART1_RX>;
+			bias-disable;
+		};
+	};
+
+	qspi_pins: qspi@0 {
+		pins {
+			pinmux = <STM32F746_PB2_FUNC_QUADSPI_CLK>,
+			       <STM32F746_PB6_FUNC_QUADSPI_BK1_NCS>,
+			       <STM32F746_PC9_FUNC_QUADSPI_BK1_IO0>,
+			       <STM32F746_PC10_FUNC_QUADSPI_BK1_IO1>,
+			       <STM32F746_PD13_FUNC_QUADSPI_BK1_IO3>,
+			       <STM32F746_PE2_FUNC_QUADSPI_BK1_IO2>;
+			slew-rate = <2>;
+		};
+	};
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Vikas Manocha <vikas.manocha-qxv4g6HH51o@public.gmane.org>
To: alexandre.torgue-qxv4g6HH51o@public.gmane.org,
	patrice.chotard-qxv4g6HH51o@public.gmane.org
Cc: Vikas Manocha <vikas.manocha-qxv4g6HH51o@public.gmane.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	"moderated list:ARM PORT"
	<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
	open list <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Maxime Coquelin
	<mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>
Subject: [PATCH] ARM: dts: stm32f7: add STM32f769I & stm32f746 discovery board support
Date: Fri, 7 Apr 2017 18:12:07 -0700	[thread overview]
Message-ID: <1491613929-11485-1-git-send-email-vikas.manocha@st.com> (raw)

Stm32f769I & stm32f746 are MCUs of stm32f7 family. Here are the major
spces of the two boards:

stm32f769I discovery board:
	- Cortex-M7 core @216MHz
	- 2MB mcu internal flash
	- 512KB internal sram
	- 16MB sdram memory
	- 64MB qspi flash memory
	- 4 inch wvga LCD-TFT Display

stm32f746 discovery board:
	- Cortex-M7 core @216MHz
	- 1MB mcu internal flash
	- 320KB internal sram
	- 8MB sdram memory
	- 16MB qspi flash memory
	- 4.3 inch 480x272 LCD-TFT display

Signed-off-by: Vikas Manocha <vikas.manocha-qxv4g6HH51o@public.gmane.org>
---
 arch/arm/boot/dts/Makefile            |   2 +
 arch/arm/boot/dts/stm32f746-disco.dts | 101 ++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/stm32f746.dtsi      |   2 +-
 arch/arm/boot/dts/stm32f769-disco.dts | 101 ++++++++++++++++++++++++++++++++++
 4 files changed, 205 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/stm32f746-disco.dts
 create mode 100644 arch/arm/boot/dts/stm32f769-disco.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 0118084..a119f74 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -763,6 +763,8 @@ dtb-$(CONFIG_ARCH_STI) += \
 dtb-$(CONFIG_ARCH_STM32)+= \
 	stm32f429-disco.dtb \
 	stm32f469-disco.dtb \
+	stm32f746-disco.dtb \
+	stm32f769-disco.dtb \
 	stm32429i-eval.dtb \
 	stm32746g-eval.dtb
 dtb-$(CONFIG_MACH_SUN4I) += \
diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts
new file mode 100644
index 0000000..c0e313f
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f746-disco.dts
@@ -0,0 +1,101 @@
+/*
+ * Copyright 2017 - Vikas MANOCHA <vikas.manocha-qxv4g6HH51o@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f746.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "STMicroelectronics STM32F746-DISCO board";
+	compatible = "st,stm32f746-disco", "st,stm32f746";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0xC0000000 0x800000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&pinctrl {
+	usart1_pins: usart1@0	{
+		pins1 {
+			pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
+				bias-disable;
+				drive-push-pull;
+				slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32F746_PB7_FUNC_USART1_RX>;
+			bias-disable;
+		};
+	};
+
+	qspi_pins: qspi@0 {
+		pins {
+			pinmux = <STM32F746_PB2_FUNC_QUADSPI_CLK>,
+			       <STM32F746_PB6_FUNC_QUADSPI_BK1_NCS>,
+			       <STM32F746_PD11_FUNC_QUADSPI_BK1_IO0>,
+			       <STM32F746_PD12_FUNC_QUADSPI_BK1_IO1>,
+			       <STM32F746_PD13_FUNC_QUADSPI_BK1_IO3>,
+			       <STM32F746_PE2_FUNC_QUADSPI_BK1_IO2>;
+			slew-rate = <2>;
+		};
+	};
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index f321ffe..826700f 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -178,7 +178,7 @@
 			interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
 		};
 
-		pin-controller {
+		pinctrl: pin-controller {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "st,stm32f746-pinctrl";
diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts
new file mode 100644
index 0000000..5f8558e
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f769-disco.dts
@@ -0,0 +1,101 @@
+/*
+ * Copyright 2017 - Vikas MANOCHA <vikas.manocha-qxv4g6HH51o@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f746.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "STMicroelectronics STM32F769-DISCO board";
+	compatible = "st,stm32f769-disco", "st,stm32f7";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0xC0000000 0x1000000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&pinctrl {
+	usart1_pins: usart1@0	{
+		pins1 {
+			pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
+				bias-disable;
+				drive-push-pull;
+				slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32F746_PA10_FUNC_USART1_RX>;
+			bias-disable;
+		};
+	};
+
+	qspi_pins: qspi@0 {
+		pins {
+			pinmux = <STM32F746_PB2_FUNC_QUADSPI_CLK>,
+			       <STM32F746_PB6_FUNC_QUADSPI_BK1_NCS>,
+			       <STM32F746_PC9_FUNC_QUADSPI_BK1_IO0>,
+			       <STM32F746_PC10_FUNC_QUADSPI_BK1_IO1>,
+			       <STM32F746_PD13_FUNC_QUADSPI_BK1_IO3>,
+			       <STM32F746_PE2_FUNC_QUADSPI_BK1_IO2>;
+			slew-rate = <2>;
+		};
+	};
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: vikas.manocha@st.com (Vikas Manocha)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: stm32f7: add STM32f769I & stm32f746 discovery board support
Date: Fri, 7 Apr 2017 18:12:07 -0700	[thread overview]
Message-ID: <1491613929-11485-1-git-send-email-vikas.manocha@st.com> (raw)

Stm32f769I & stm32f746 are MCUs of stm32f7 family. Here are the major
spces of the two boards:

stm32f769I discovery board:
	- Cortex-M7 core @216MHz
	- 2MB mcu internal flash
	- 512KB internal sram
	- 16MB sdram memory
	- 64MB qspi flash memory
	- 4 inch wvga LCD-TFT Display

stm32f746 discovery board:
	- Cortex-M7 core @216MHz
	- 1MB mcu internal flash
	- 320KB internal sram
	- 8MB sdram memory
	- 16MB qspi flash memory
	- 4.3 inch 480x272 LCD-TFT display

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
---
 arch/arm/boot/dts/Makefile            |   2 +
 arch/arm/boot/dts/stm32f746-disco.dts | 101 ++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/stm32f746.dtsi      |   2 +-
 arch/arm/boot/dts/stm32f769-disco.dts | 101 ++++++++++++++++++++++++++++++++++
 4 files changed, 205 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/stm32f746-disco.dts
 create mode 100644 arch/arm/boot/dts/stm32f769-disco.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 0118084..a119f74 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -763,6 +763,8 @@ dtb-$(CONFIG_ARCH_STI) += \
 dtb-$(CONFIG_ARCH_STM32)+= \
 	stm32f429-disco.dtb \
 	stm32f469-disco.dtb \
+	stm32f746-disco.dtb \
+	stm32f769-disco.dtb \
 	stm32429i-eval.dtb \
 	stm32746g-eval.dtb
 dtb-$(CONFIG_MACH_SUN4I) += \
diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts
new file mode 100644
index 0000000..c0e313f
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f746-disco.dts
@@ -0,0 +1,101 @@
+/*
+ * Copyright 2017 - Vikas MANOCHA <vikas.manocha@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f746.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "STMicroelectronics STM32F746-DISCO board";
+	compatible = "st,stm32f746-disco", "st,stm32f746";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0xC0000000 0x800000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&pinctrl {
+	usart1_pins: usart1 at 0	{
+		pins1 {
+			pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
+				bias-disable;
+				drive-push-pull;
+				slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32F746_PB7_FUNC_USART1_RX>;
+			bias-disable;
+		};
+	};
+
+	qspi_pins: qspi at 0 {
+		pins {
+			pinmux = <STM32F746_PB2_FUNC_QUADSPI_CLK>,
+			       <STM32F746_PB6_FUNC_QUADSPI_BK1_NCS>,
+			       <STM32F746_PD11_FUNC_QUADSPI_BK1_IO0>,
+			       <STM32F746_PD12_FUNC_QUADSPI_BK1_IO1>,
+			       <STM32F746_PD13_FUNC_QUADSPI_BK1_IO3>,
+			       <STM32F746_PE2_FUNC_QUADSPI_BK1_IO2>;
+			slew-rate = <2>;
+		};
+	};
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index f321ffe..826700f 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -178,7 +178,7 @@
 			interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
 		};
 
-		pin-controller {
+		pinctrl: pin-controller {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "st,stm32f746-pinctrl";
diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts
new file mode 100644
index 0000000..5f8558e
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f769-disco.dts
@@ -0,0 +1,101 @@
+/*
+ * Copyright 2017 - Vikas MANOCHA <vikas.manocha@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f746.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "STMicroelectronics STM32F769-DISCO board";
+	compatible = "st,stm32f769-disco", "st,stm32f7";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0xC0000000 0x1000000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&pinctrl {
+	usart1_pins: usart1 at 0	{
+		pins1 {
+			pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
+				bias-disable;
+				drive-push-pull;
+				slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32F746_PA10_FUNC_USART1_RX>;
+			bias-disable;
+		};
+	};
+
+	qspi_pins: qspi at 0 {
+		pins {
+			pinmux = <STM32F746_PB2_FUNC_QUADSPI_CLK>,
+			       <STM32F746_PB6_FUNC_QUADSPI_BK1_NCS>,
+			       <STM32F746_PC9_FUNC_QUADSPI_BK1_IO0>,
+			       <STM32F746_PC10_FUNC_QUADSPI_BK1_IO1>,
+			       <STM32F746_PD13_FUNC_QUADSPI_BK1_IO3>,
+			       <STM32F746_PE2_FUNC_QUADSPI_BK1_IO2>;
+			slew-rate = <2>;
+		};
+	};
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
-- 
1.9.1

             reply	other threads:[~2017-04-08  1:33 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-08  1:12 Vikas Manocha [this message]
2017-04-08  1:12 ` [PATCH] ARM: dts: stm32f7: add STM32f769I & stm32f746 discovery board support Vikas Manocha
2017-04-08  1:12 ` Vikas Manocha
2017-04-10  7:23 ` Alexandre Torgue
2017-04-10  7:23   ` Alexandre Torgue
2017-04-10  7:23   ` Alexandre Torgue
2017-04-10 18:40   ` Vikas Manocha
2017-04-10 18:40     ` Vikas Manocha
2017-04-10 18:40     ` Vikas Manocha
2017-04-11  7:50     ` Alexandre Torgue
2017-04-11  7:50       ` Alexandre Torgue
2017-04-11  7:50       ` Alexandre Torgue
2017-04-13  0:03       ` Vikas MANOCHA
2017-04-13  0:03         ` Vikas MANOCHA
2017-04-13  0:03         ` Vikas MANOCHA
2017-04-12 23:50 [PATCH] ARM: dts: stm32f7: add stm32f769I " Vikas Manocha
2017-04-12 23:50 ` Vikas Manocha
2017-04-12 23:50 ` Vikas Manocha

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1491613929-11485-1-git-send-email-vikas.manocha@st.com \
    --to=vikas.manocha@st.com \
    --cc=alexandre.torgue@st.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=patrice.chotard@st.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.